ld/scripttempl/elfm9s12z.sc - binutils-gdb - Git at Google

 # Copyright (C) 2014-2021 Free Software Foundation, Inc.
 #
 # Copying and distribution of this file, with or without modification,
 # are permitted in any medium without royalty provided the copyright
 # notice and this notice are preserved.
 #
 # Unusual variables checked by this code:
 #	NOP - four byte opcode for no-op (defaults to 0)
 #	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
 #	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
 #		(e.g., .PARISC.global)
 #	OTHER_SECTIONS - at the end
 #	EXECUTABLE_SYMBOLS - symbols that must be defined for an
 #		executable (e.g., _DYNAMIC_LINK)
 #	TEXT_START_SYMBOLS - symbols that appear at the start of the
 #		.text section.
 #	DATA_START_SYMBOLS - symbols that appear at the start of the
 #		.data section.
 #	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
 #		.bss section besides __bss_start.
 #	EMBEDDED - whether this is for an embedded system.
 #
 # When adding sections, do note that the names of some sections are used
 # when specifying the start address of the next.
 #
 test -z "$ENTRY" && ENTRY=_start
 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
 test "$LD_FLAG" = "N" && DATA_ADDR=.

 CTOR=".ctors ${CONSTRUCTING-0} :
   {
     ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
     ${CONSTRUCTING+${CTOR_START}}
     KEEP (*(.ctors))

     ${CONSTRUCTING+${CTOR_END}}
     ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
   } ${RELOCATING+ > ${TEXT_MEMORY}}"

 DTOR="  .dtors	${CONSTRUCTING-0} :
   {
     ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
     KEEP (*(.dtors))
     ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
   } ${RELOCATING+ > ${TEXT_MEMORY}}"


 VECTORS="
   /* If the 'vectors_addr' symbol is defined, it indicates the start address
      of interrupt vectors.

      In general, the vectors address is 0xfffe00.  This can be overriden
      with the '-defsym vectors_addr=0xbfc000' ld option.  If you do this,
      then your startup code should also set the IVBR register accordingly.
   */

   PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xfffe00);
   .vectors DEFINED (vectors_addr) ? vectors_addr : 0xfffe00 :
   {
     KEEP (*(.vectors))
   }"

 #
 # We provide two emulations: a fixed on that defines some memory banks
 # and a configurable one that includes a user provided memory definition.
 #
 case $GENERIC_BOARD in
   yes|1|YES)
 	MEMORY_DEF="
 /* Get memory banks definition from some user configuration file.
    This file must be located in some linker directory (search path
    with -L<dir>). See fixed memory banks emulation script.  */
 INCLUDE memory.x;
 "
 	;;
   *)
 MEMORY_DEF="
 /* Fixed definition of the available memory banks.
    See generic emulation script for a user defined configuration.  */
 MEMORY
 {
   text  (rx)  : ORIGIN = $[$ROM_TOP - $ROM_SIZE + 1], LENGTH = ${ROM_SIZE} - 4
   data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
   eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
   rvec        : ORIGIN = 0xFFFFFC,  LENGTH = 4
 }

 /* Setup the stack on the top of the data memory bank.  */
 PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
 "
 	;;
 esac

 STARTUP_CODE="
     /* Startup code.  */
     KEEP (*(.install0))	/* Section should setup the stack pointer.  */
     KEEP (*(.install1))	/* Place holder for applications.  */
     KEEP (*(.install2))	/* Optional installation of data sections in RAM.  */
     KEEP (*(.install3))	/* Place holder for applications.  */
     KEEP (*(.install4))	/* Section that calls the main.  */
 "

 FINISH_CODE="
     /* Finish code.  */
     KEEP (*(.fini0))	/* Beginning of finish code (_exit symbol).  */
     KEEP (*(.fini1))	/* Place holder for applications.  */
     KEEP (*(.fini2))	/* C++ destructors.  */
     KEEP (*(.fini3))	/* Place holder for applications.  */
     KEEP (*(.fini4))	/* Runtime exit.  */
 "

 PRE_COMPUTE_DATA_SIZE="
 /* SCz: this does not work yet... This is supposed to force the loading
    of _map_data.o (from libgcc.a) when the .data section is not empty.
    By doing so, this should bring the code that copies the .data section
    from ROM to RAM at init time.

   ___pre_comp_data_size = SIZEOF(.data);
   __install_data_sections = ___pre_comp_data_size > 0 ?
 		__map_data_sections : 0;
 */
 "

 INSTALL_RELOC="
   .install0 0 : { *(.install0) }
   .install1 0 : { *(.install1) }
   .install2 0 : { *(.install2) }
   .install3 0 : { *(.install3) }
   .install4 0 : { *(.install4) }
 "

 FINISH_RELOC="
   .fini0 0 : { *(.fini0) }
   .fini1 0 : { *(.fini1) }
   .fini2 0 : { *(.fini2) }
   .fini3 0 : { *(.fini3) }
   .fini4 0 : { *(.fini4) }
 "

 BSS_DATA_RELOC="
   .data1 0 : { *(.data1) }

   /* We want the small data sections together, so single-instruction offsets
      can access them all, and initialized data all before uninitialized, so
      we can shorten the on-disk segment size.  */
   .sdata   0 : { *(.sdata) }
   .sbss    0 : { *(.sbss) }
   .scommon 0 : { *(.scommon) }
 "

 SOFT_REGS_RELOC="
   .softregs 0 : { *(.softregs) }
 "

 cat <<EOF
 /* Copyright (C) 2014-2021 Free Software Foundation, Inc.

    Copying and distribution of this script, with or without modification,
    are permitted in any medium without royalty provided the copyright
    notice and this notice are preserved.  */

 ${RELOCATING+/* Linker script for HCS12Z executable (PROM).  */}
 ${RELOCATING-/* Linker script for HCS12Z object file (ld -r).  */}

 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 	      "${LITTLE_OUTPUT_FORMAT}")
 OUTPUT_ARCH(${OUTPUT_ARCH})
 ${RELOCATING+ENTRY(${ENTRY})}

 ${RELOCATING+${LIB_SEARCH_DIRS}}
 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 ${RELOCATING+${MEMORY_DEF}}

 ${RELOCATING+PROVIDE (_start = $[$ROM_TOP - $ROM_SIZE + 1]);}
 SECTIONS
 {
   .hash        ${RELOCATING-0} : { *(.hash)		}
   .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
   .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
   .gnu.version		${RELOCATING-0} : { *(.gnu.version) }
   .gnu.version_d	${RELOCATING-0} : { *(.gnu.version_d) }
   .gnu.version_r	${RELOCATING-0} : { *(.gnu.version_r) }

   .rel.text    ${RELOCATING-0} :
     {
       *(.rel.text)
       ${RELOCATING+*(.rel.text.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
     }
   .rela.text   ${RELOCATING-0} :
     {
       *(.rela.text)
       ${RELOCATING+*(.rela.text.*)}
       ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
     }
   .rel.data    ${RELOCATING-0} :
     {
       *(.rel.data)
       ${RELOCATING+*(.rel.data.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
     }
   .rela.data   ${RELOCATING-0} :
     {
       *(.rela.data)
       ${RELOCATING+*(.rela.data.*)}
       ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
     }
   .rel.rodata  ${RELOCATING-0} :
     {
       *(.rel.rodata)
       ${RELOCATING+*(.rel.rodata.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
     }
   .rela.rodata ${RELOCATING-0} :
     {
       *(.rela.rodata)
       ${RELOCATING+*(.rela.rodata.*)}
       ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
     }
   .rel.sdata   ${RELOCATING-0} :
     {
       *(.rel.sdata)
       ${RELOCATING+*(.rel.sdata.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
     }
   .rela.sdata   ${RELOCATING-0} :
     {
       *(.rela.sdata)
       ${RELOCATING+*(.rela.sdata.*)}
       ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
     }
   .rel.sbss    ${RELOCATING-0} :
     {
       *(.rel.sbss)
       ${RELOCATING+*(.rel.sbss.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
     }
   .rela.sbss   ${RELOCATING-0} :
     {
       *(.rela.sbss)
       ${RELOCATING+*(.rela.sbss.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
     }
   .rel.bss     ${RELOCATING-0} :
     {
       *(.rel.bss)
       ${RELOCATING+*(.rel.bss.*)}
       ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
     }
   .rela.bss    ${RELOCATING-0} :
     {
       *(.rela.bss)
       ${RELOCATING+*(.rela.bss.*)}
       ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
     }
   .rel.stext		${RELOCATING-0} : { *(.rel.stest) }
   .rela.stext		${RELOCATING-0} : { *(.rela.stest) }
   .rel.etext		${RELOCATING-0} : { *(.rel.etest) }
   .rela.etext		${RELOCATING-0} : { *(.rela.etest) }
   .rel.sdata		${RELOCATING-0} : { *(.rel.sdata) }
   .rela.sdata		${RELOCATING-0} : { *(.rela.sdata) }
   .rel.edata		${RELOCATING-0} : { *(.rel.edata) }
   .rela.edata		${RELOCATING-0} : { *(.rela.edata) }
   .rel.eit_v		${RELOCATING-0} : { *(.rel.eit_v) }
   .rela.eit_v		${RELOCATING-0} : { *(.rela.eit_v) }
   .rel.ebss		${RELOCATING-0} : { *(.rel.ebss) }
   .rela.ebss		${RELOCATING-0} : { *(.rela.ebss) }
   .rel.srodata		${RELOCATING-0} : { *(.rel.srodata) }
   .rela.srodata		${RELOCATING-0} : { *(.rela.srodata) }
   .rel.erodata		${RELOCATING-0} : { *(.rel.erodata) }
   .rela.erodata		${RELOCATING-0} : { *(.rela.erodata) }
   .rel.got		${RELOCATING-0} : { *(.rel.got) }
   .rela.got		${RELOCATING-0} : { *(.rela.got) }
   .rel.ctors		${RELOCATING-0} : { *(.rel.ctors) }
   .rela.ctors		${RELOCATING-0} : { *(.rela.ctors) }
   .rel.dtors		${RELOCATING-0} : { *(.rel.dtors) }
   .rela.dtors		${RELOCATING-0} : { *(.rela.dtors) }
   .rel.init		${RELOCATING-0} : { *(.rel.init) }
   .rela.init		${RELOCATING-0} : { *(.rela.init) }
   .rel.fini		${RELOCATING-0} : { *(.rel.fini) }
   .rela.fini		${RELOCATING-0} : { *(.rela.fini) }
   .rel.plt		${RELOCATING-0} : { *(.rel.plt) }
   .rela.plt		${RELOCATING-0} : { *(.rela.plt) }

   /* Start of text section.  */
   .stext ${RELOCATING-0} :
   {
     *(.stext)
   } ${RELOCATING+ > ${TEXT_MEMORY}}

   .init	${RELOCATING-0} :
   {
     KEEP (*(SORT_NONE(.init)))
   } ${RELOCATING+=${NOP-0}}

   ${RELOCATING-${INSTALL_RELOC}}
   ${RELOCATING-${FINISH_RELOC}}

   .text ${RELOCATING-0}:
   {
     /* Put startup code at beginning so that _start keeps same address.  */
     ${RELOCATING+${STARTUP_CODE}}

     *(.text)
     ${RELOCATING+*(.text.*)}
     /* .gnu.warning sections are handled specially by elf.em.  */
     *(.gnu.warning)
     ${RELOCATING+*(.gnu.linkonce.t.*)}
     ${RELOCATING+*(.tramp)}
     ${RELOCATING+*(.tramp.*)}

     ${RELOCATING+KEEP (*(SORT_NONE(.fini)))}
     ${RELOCATING+${FINISH_CODE}}

     ${RELOCATING+_etext = .;}
     ${RELOCATING+PROVIDE (etext = .);}
     ${RELOCATING+. = ALIGN(2);}
   } ${RELOCATING+ > ${TEXT_MEMORY} =${NOP}}
   .rvec ${RELOCATING-0} :
   {
     ${RELOCATING+LONG(_start);}
   } ${RELOCATING+ > rvec}
   .eh_frame ${RELOCATING-0} :
   {
     KEEP (*(.eh_frame))
   } ${RELOCATING+ > ${TEXT_MEMORY}}

   .gcc_except_table ${RELOCATING-0} :
   {
     *(.gcc_except_table)
   } ${RELOCATING+ > ${TEXT_MEMORY}}

   .rodata  ${RELOCATING-0} :
   {
     *(.rodata)
     ${RELOCATING+*(.rodata.*)}
     ${RELOCATING+*(.gnu.linkonce.r*)}
     ${RELOCATING+. = ALIGN(2);}
   } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}

   .rodata1 ${RELOCATING-0} :
   {
     *(.rodata1)
     ${RELOCATING+. = ALIGN(2);}
   } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}

   /* Constructor and destructor tables are in ROM.  */
   ${RELOCATING+${CTOR}}
   ${RELOCATING+${DTOR}}

   .jcr ${RELOCATING-0} :
   {
     KEEP (*(.jcr))
   } ${RELOCATING+ > ${TEXT_MEMORY}}

   /* Start of the data section image in ROM.  */
   ${RELOCATING+__data_image = .;}
   ${RELOCATING+PROVIDE (__data_image = .);}

   /* All read-only sections that normally go in PROM must be above.
      We construct the DATA image section in PROM at end of all these
      read-only sections.  The data image must be copied at init time.
      Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
   .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
   {
     ${RELOCATING+__data_section_start = .;}
     ${RELOCATING+PROVIDE (__data_section_start = .);}

     ${RELOCATING+${DATA_START_SYMBOLS}}
     ${RELOCATING+*(.sdata)}
     *(.data)
     ${RELOCATING+*(.data.*)}
     ${RELOCATING+*(.data1)}
     ${RELOCATING+*(.gnu.linkonce.d.*)}
     ${CONSTRUCTING+CONSTRUCTORS}

     ${RELOCATING+_edata  =  .;}
     ${RELOCATING+PROVIDE (edata = .);}
     ${RELOCATING+. = ALIGN(2);}
   } ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}

   ${RELOCATING+__data_section_size = SIZEOF(.data);}
   ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
   ${RELOCATING+__data_image_end = __data_image + __data_section_size;}

   ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}

   .install ${RELOCATING-0}:
   {
     ${RELOCATING+. = __data_section_size;}
   } ${RELOCATING+ > ${TEXT_MEMORY}}

   /* Relocation for some bss and data sections.  */
   ${RELOCATING-${BSS_DATA_RELOC}}
   ${RELOCATING-${SOFT_REGS_RELOC}}

   .bss ${RELOCATING-0} :
   {
     ${RELOCATING+__bss_start = .;}
     ${RELOCATING+*(.softregs)}
     ${RELOCATING+*(.sbss)}
     ${RELOCATING+*(.common)}
     ${RELOCATING+*(.scommon)}
     ${RELOCATING+*(.dynbss)}
     *(.bss)
     ${RELOCATING+*(.bss.*)}
     ${RELOCATING+*(.gnu.linkonce.b.*)}
     ${RELOCATING+*(COMMON)}
     ${RELOCATING+PROVIDE (_end = .);}
   } ${RELOCATING+ > ${DATA_MEMORY}}
   ${RELOCATING+__bss_size = SIZEOF(.bss);}
   ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}

   .eeprom ${RELOCATING-0} :
   {
     *(.eeprom)
     ${RELOCATING+*(.eeprom.*)}
   } ${RELOCATING+ > ${EEPROM_MEMORY}}

   ${RELOCATING+${VECTORS}}

   /* Stabs debugging sections.  */
   .stab		 0 : { *(.stab) }
   .stabstr	 0 : { *(.stabstr) }
   .stab.excl	 0 : { *(.stab.excl) }
   .stab.exclstr	 0 : { *(.stab.exclstr) }
   .stab.index	 0 : { *(.stab.index) }
   .stab.indexstr 0 : { *(.stab.indexstr) }

   .comment	 0 : { *(.comment) }

   /* Treatment of DWARF debug section must be at end of the linker
      script to avoid problems when there are undefined symbols. It's necessary
      to avoid that the DWARF section is relocated before such undefined
      symbols are found.  */
 EOF

 . $srcdir/scripttempl/DWARF.sc

 cat <<EOF
 }
 EOF
	# Copyright (C) 2014-2021 Free Software Foundation, Inc.
	#
	# Copying and distribution of this file, with or without modification,
	# are permitted in any medium without royalty provided the copyright
	# notice and this notice are preserved.
	#
	# Unusual variables checked by this code:
	# NOP - four byte opcode for no-op (defaults to 0)
	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	# (e.g., .PARISC.global)
	# OTHER_SECTIONS - at the end
	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	# executable (e.g., _DYNAMIC_LINK)
	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	# .text section.
	# DATA_START_SYMBOLS - symbols that appear at the start of the
	# .data section.
	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	# .bss section besides __bss_start.
	# EMBEDDED - whether this is for an embedded system.
	#
	# When adding sections, do note that the names of some sections are used
	# when specifying the start address of the next.
	#
	test -z "$ENTRY" && ENTRY=_start
	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
	test "$LD_FLAG" = "N" && DATA_ADDR=.

	CTOR=".ctors ${CONSTRUCTING-0} :
	{
	${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
	${CONSTRUCTING+${CTOR_START}}
	KEEP (*(.ctors))

	${CONSTRUCTING+${CTOR_END}}
	${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
	} ${RELOCATING+ > ${TEXT_MEMORY}}"

	DTOR=" .dtors ${CONSTRUCTING-0} :
	{
	${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
	KEEP (*(.dtors))
	${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
	} ${RELOCATING+ > ${TEXT_MEMORY}}"


	VECTORS="
	/* If the 'vectors_addr' symbol is defined, it indicates the start address
	of interrupt vectors.

	In general, the vectors address is 0xfffe00. This can be overriden
	with the '-defsym vectors_addr=0xbfc000' ld option. If you do this,
	then your startup code should also set the IVBR register accordingly.
	*/

	PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xfffe00);
	.vectors DEFINED (vectors_addr) ? vectors_addr : 0xfffe00 :
	{
	KEEP (*(.vectors))
	}"

	#
	# We provide two emulations: a fixed on that defines some memory banks
	# and a configurable one that includes a user provided memory definition.
	#
	case $GENERIC_BOARD in
	yes\|1\|YES)
	MEMORY_DEF="
	/* Get memory banks definition from some user configuration file.
	This file must be located in some linker directory (search path
	with -L<dir>). See fixed memory banks emulation script. */
	INCLUDE memory.x;
	"
	;;
	*)
	MEMORY_DEF="
	/* Fixed definition of the available memory banks.
	See generic emulation script for a user defined configuration. */
	MEMORY
	{
	text (rx) : ORIGIN = $[$ROM_TOP - $ROM_SIZE + 1], LENGTH = ${ROM_SIZE} - 4
	data : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
	eeprom : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
	rvec : ORIGIN = 0xFFFFFC, LENGTH = 4
	}

	/* Setup the stack on the top of the data memory bank. */
	PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
	"
	;;
	esac

	STARTUP_CODE="
	/* Startup code. */
	KEEP ((.install0)) / Section should setup the stack pointer. */
	KEEP ((.install1)) / Place holder for applications. */
	KEEP ((.install2)) / Optional installation of data sections in RAM. */
	KEEP ((.install3)) / Place holder for applications. */
	KEEP ((.install4)) / Section that calls the main. */
	"

	FINISH_CODE="
	/* Finish code. */
	KEEP ((.fini0)) / Beginning of finish code (_exit symbol). */
	KEEP ((.fini1)) / Place holder for applications. */
	KEEP ((.fini2)) / C++ destructors. */
	KEEP ((.fini3)) / Place holder for applications. */
	KEEP ((.fini4)) / Runtime exit. */
	"

	PRE_COMPUTE_DATA_SIZE="
	/* SCz: this does not work yet... This is supposed to force the loading
	of _map_data.o (from libgcc.a) when the .data section is not empty.
	By doing so, this should bring the code that copies the .data section
	from ROM to RAM at init time.

	___pre_comp_data_size = SIZEOF(.data);
	__install_data_sections = ___pre_comp_data_size > 0 ?
	__map_data_sections : 0;
	*/
	"

	INSTALL_RELOC="
	.install0 0 : { *(.install0) }
	.install1 0 : { *(.install1) }
	.install2 0 : { *(.install2) }
	.install3 0 : { *(.install3) }
	.install4 0 : { *(.install4) }
	"

	FINISH_RELOC="
	.fini0 0 : { *(.fini0) }
	.fini1 0 : { *(.fini1) }
	.fini2 0 : { *(.fini2) }
	.fini3 0 : { *(.fini3) }
	.fini4 0 : { *(.fini4) }
	"

	BSS_DATA_RELOC="
	.data1 0 : { *(.data1) }

	/* We want the small data sections together, so single-instruction offsets
	can access them all, and initialized data all before uninitialized, so
	we can shorten the on-disk segment size. */
	.sdata 0 : { *(.sdata) }
	.sbss 0 : { *(.sbss) }
	.scommon 0 : { *(.scommon) }
	"

	SOFT_REGS_RELOC="
	.softregs 0 : { *(.softregs) }
	"

	cat <<EOF
	/* Copyright (C) 2014-2021 Free Software Foundation, Inc.

	Copying and distribution of this script, with or without modification,
	are permitted in any medium without royalty provided the copyright
	notice and this notice are preserved. */

	${RELOCATING+/* Linker script for HCS12Z executable (PROM). */}
	${RELOCATING-/* Linker script for HCS12Z object file (ld -r). */}

	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	"${LITTLE_OUTPUT_FORMAT}")
	OUTPUT_ARCH(${OUTPUT_ARCH})
	${RELOCATING+ENTRY(${ENTRY})}

	${RELOCATING+${LIB_SEARCH_DIRS}}
	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	${RELOCATING+${MEMORY_DEF}}

	${RELOCATING+PROVIDE (_start = $[$ROM_TOP - $ROM_SIZE + 1]);}
	SECTIONS
	{
	.hash ${RELOCATING-0} : { *(.hash) }
	.dynsym ${RELOCATING-0} : { *(.dynsym) }
	.dynstr ${RELOCATING-0} : { *(.dynstr) }
	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
	.gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
	.gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }

	.rel.text ${RELOCATING-0} :
	{
	*(.rel.text)
	${RELOCATING+(.rel.text.)}
	${RELOCATING+(.rel.gnu.linkonce.t.)}
	}
	.rela.text ${RELOCATING-0} :
	{
	*(.rela.text)
	${RELOCATING+(.rela.text.)}
	${RELOCATING+(.rela.gnu.linkonce.t.)}
	}
	.rel.data ${RELOCATING-0} :
	{
	*(.rel.data)
	${RELOCATING+(.rel.data.)}
	${RELOCATING+(.rel.gnu.linkonce.d.)}
	}
	.rela.data ${RELOCATING-0} :
	{
	*(.rela.data)
	${RELOCATING+(.rela.data.)}
	${RELOCATING+(.rela.gnu.linkonce.d.)}
	}
	.rel.rodata ${RELOCATING-0} :
	{
	*(.rel.rodata)
	${RELOCATING+(.rel.rodata.)}
	${RELOCATING+(.rel.gnu.linkonce.r.)}
	}
	.rela.rodata ${RELOCATING-0} :
	{
	*(.rela.rodata)
	${RELOCATING+(.rela.rodata.)}
	${RELOCATING+(.rela.gnu.linkonce.r.)}
	}
	.rel.sdata ${RELOCATING-0} :
	{
	*(.rel.sdata)
	${RELOCATING+(.rel.sdata.)}
	${RELOCATING+(.rel.gnu.linkonce.s.)}
	}
	.rela.sdata ${RELOCATING-0} :
	{
	*(.rela.sdata)
	${RELOCATING+(.rela.sdata.)}
	${RELOCATING+(.rela.gnu.linkonce.s.)}
	}
	.rel.sbss ${RELOCATING-0} :
	{
	*(.rel.sbss)
	${RELOCATING+(.rel.sbss.)}
	${RELOCATING+(.rel.gnu.linkonce.sb.)}
	}
	.rela.sbss ${RELOCATING-0} :
	{
	*(.rela.sbss)
	${RELOCATING+(.rela.sbss.)}
	${RELOCATING+(.rel.gnu.linkonce.sb.)}
	}
	.rel.bss ${RELOCATING-0} :
	{
	*(.rel.bss)
	${RELOCATING+(.rel.bss.)}
	${RELOCATING+(.rel.gnu.linkonce.b.)}
	}
	.rela.bss ${RELOCATING-0} :
	{
	*(.rela.bss)
	${RELOCATING+(.rela.bss.)}
	${RELOCATING+(.rela.gnu.linkonce.b.)}
	}
	.rel.stext ${RELOCATING-0} : { *(.rel.stest) }
	.rela.stext ${RELOCATING-0} : { *(.rela.stest) }
	.rel.etext ${RELOCATING-0} : { *(.rel.etest) }
	.rela.etext ${RELOCATING-0} : { *(.rela.etest) }
	.rel.sdata ${RELOCATING-0} : { *(.rel.sdata) }
	.rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
	.rel.edata ${RELOCATING-0} : { *(.rel.edata) }
	.rela.edata ${RELOCATING-0} : { *(.rela.edata) }
	.rel.eit_v ${RELOCATING-0} : { *(.rel.eit_v) }
	.rela.eit_v ${RELOCATING-0} : { *(.rela.eit_v) }
	.rel.ebss ${RELOCATING-0} : { *(.rel.ebss) }
	.rela.ebss ${RELOCATING-0} : { *(.rela.ebss) }
	.rel.srodata ${RELOCATING-0} : { *(.rel.srodata) }
	.rela.srodata ${RELOCATING-0} : { *(.rela.srodata) }
	.rel.erodata ${RELOCATING-0} : { *(.rel.erodata) }
	.rela.erodata ${RELOCATING-0} : { *(.rela.erodata) }
	.rel.got ${RELOCATING-0} : { *(.rel.got) }
	.rela.got ${RELOCATING-0} : { *(.rela.got) }
	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
	.rel.init ${RELOCATING-0} : { *(.rel.init) }
	.rela.init ${RELOCATING-0} : { *(.rela.init) }
	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }

	/* Start of text section. */
	.stext ${RELOCATING-0} :
	{
	*(.stext)
	} ${RELOCATING+ > ${TEXT_MEMORY}}

	.init ${RELOCATING-0} :
	{
	KEEP (*(SORT_NONE(.init)))
	} ${RELOCATING+=${NOP-0}}

	${RELOCATING-${INSTALL_RELOC}}
	${RELOCATING-${FINISH_RELOC}}

	.text ${RELOCATING-0}:
	{
	/* Put startup code at beginning so that _start keeps same address. */
	${RELOCATING+${STARTUP_CODE}}

	*(.text)
	${RELOCATING+(.text.)}
	/* .gnu.warning sections are handled specially by elf.em. */
	*(.gnu.warning)
	${RELOCATING+(.gnu.linkonce.t.)}
	${RELOCATING+*(.tramp)}
	${RELOCATING+(.tramp.)}

	${RELOCATING+KEEP (*(SORT_NONE(.fini)))}
	${RELOCATING+${FINISH_CODE}}

	${RELOCATING+_etext = .;}
	${RELOCATING+PROVIDE (etext = .);}
	${RELOCATING+. = ALIGN(2);}
	} ${RELOCATING+ > ${TEXT_MEMORY} =${NOP}}
	.rvec ${RELOCATING-0} :
	{
	${RELOCATING+LONG(_start);}
	} ${RELOCATING+ > rvec}
	.eh_frame ${RELOCATING-0} :
	{
	KEEP (*(.eh_frame))
	} ${RELOCATING+ > ${TEXT_MEMORY}}

	.gcc_except_table ${RELOCATING-0} :
	{
	*(.gcc_except_table)
	} ${RELOCATING+ > ${TEXT_MEMORY}}

	.rodata ${RELOCATING-0} :
	{
	*(.rodata)
	${RELOCATING+(.rodata.)}
	${RELOCATING+(.gnu.linkonce.r)}
	${RELOCATING+. = ALIGN(2);}
	} ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}

	.rodata1 ${RELOCATING-0} :
	{
	*(.rodata1)
	${RELOCATING+. = ALIGN(2);}
	} ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}

	/* Constructor and destructor tables are in ROM. */
	${RELOCATING+${CTOR}}
	${RELOCATING+${DTOR}}

	.jcr ${RELOCATING-0} :
	{
	KEEP (*(.jcr))
	} ${RELOCATING+ > ${TEXT_MEMORY}}

	/* Start of the data section image in ROM. */
	${RELOCATING+__data_image = .;}
	${RELOCATING+PROVIDE (__data_image = .);}

	/* All read-only sections that normally go in PROM must be above.
	We construct the DATA image section in PROM at end of all these
	read-only sections. The data image must be copied at init time.
	Refer to GNU ld, Section 3.6.8.2 Output Section LMA. */
	.data ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
	{
	${RELOCATING+__data_section_start = .;}
	${RELOCATING+PROVIDE (__data_section_start = .);}

	${RELOCATING+${DATA_START_SYMBOLS}}
	${RELOCATING+*(.sdata)}
	*(.data)
	${RELOCATING+(.data.)}
	${RELOCATING+*(.data1)}
	${RELOCATING+(.gnu.linkonce.d.)}
	${CONSTRUCTING+CONSTRUCTORS}

	${RELOCATING+_edata = .;}
	${RELOCATING+PROVIDE (edata = .);}
	${RELOCATING+. = ALIGN(2);}
	} ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}

	${RELOCATING+__data_section_size = SIZEOF(.data);}
	${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
	${RELOCATING+__data_image_end = __data_image + __data_section_size;}

	${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}

	.install ${RELOCATING-0}:
	{
	${RELOCATING+. = __data_section_size;}
	} ${RELOCATING+ > ${TEXT_MEMORY}}

	/* Relocation for some bss and data sections. */
	${RELOCATING-${BSS_DATA_RELOC}}
	${RELOCATING-${SOFT_REGS_RELOC}}

	.bss ${RELOCATING-0} :
	{
	${RELOCATING+__bss_start = .;}
	${RELOCATING+*(.softregs)}
	${RELOCATING+*(.sbss)}
	${RELOCATING+*(.common)}
	${RELOCATING+*(.scommon)}
	${RELOCATING+*(.dynbss)}
	*(.bss)
	${RELOCATING+(.bss.)}
	${RELOCATING+(.gnu.linkonce.b.)}
	${RELOCATING+*(COMMON)}
	${RELOCATING+PROVIDE (_end = .);}
	} ${RELOCATING+ > ${DATA_MEMORY}}
	${RELOCATING+__bss_size = SIZEOF(.bss);}
	${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}

	.eeprom ${RELOCATING-0} :
	{
	*(.eeprom)
	${RELOCATING+(.eeprom.)}
	} ${RELOCATING+ > ${EEPROM_MEMORY}}

	${RELOCATING+${VECTORS}}

	/* Stabs debugging sections. */
	.stab 0 : { *(.stab) }
	.stabstr 0 : { *(.stabstr) }
	.stab.excl 0 : { *(.stab.excl) }
	.stab.exclstr 0 : { *(.stab.exclstr) }
	.stab.index 0 : { *(.stab.index) }
	.stab.indexstr 0 : { *(.stab.indexstr) }

	.comment 0 : { *(.comment) }

	/* Treatment of DWARF debug section must be at end of the linker
	script to avoid problems when there are undefined symbols. It's necessary
	to avoid that the DWARF section is relocated before such undefined
	symbols are found. */
	EOF

	. $srcdir/scripttempl/DWARF.sc

	cat <<EOF
	}
	EOF