| dnl Process this file with autoconf to produce a configure script. | 
 | dnl | 
 | dnl   Copyright (C) 2012-2022 Free Software Foundation, Inc. | 
 | dnl | 
 | dnl This file is free software; you can redistribute it and/or modify | 
 | dnl it under the terms of the GNU General Public License as published by | 
 | dnl the Free Software Foundation; either version 3 of the License, or | 
 | dnl (at your option) any later version. | 
 | dnl | 
 | dnl This program is distributed in the hope that it will be useful, | 
 | dnl but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | dnl GNU General Public License for more details. | 
 | dnl | 
 | dnl You should have received a copy of the GNU General Public License | 
 | dnl along with this program; see the file COPYING3.  If not see | 
 | dnl <http://www.gnu.org/licenses/>. | 
 | dnl | 
 |  | 
 | m4_include([../bfd/version.m4]) | 
 | m4_include([../config/debuginfod.m4]) | 
 | AC_INIT([binutils], BFD_VERSION) | 
 | AC_CONFIG_SRCDIR(ar.c) | 
 |  | 
 | AC_CANONICAL_TARGET | 
 |  | 
 | AM_INIT_AUTOMAKE | 
 | AM_SILENT_RULES([yes]) | 
 |  | 
 | AC_PROG_CC | 
 | AC_GNU_SOURCE | 
 | AC_USE_SYSTEM_EXTENSIONS | 
 |  | 
 | LT_INIT | 
 | ACX_LARGEFILE | 
 |  | 
 | ac_checking= | 
 | . ${srcdir}/../bfd/development.sh | 
 | test "$development" = true && ac_checking=yes | 
 | AC_ARG_ENABLE(checking, | 
 | [  --enable-checking       enable run-time checks], | 
 | [case "${enableval}" in | 
 |   no|none)  ac_checking= ;; | 
 |   *)	    ac_checking=yes ;; | 
 | esac])dnl | 
 | if test x$ac_checking != x ; then | 
 |   AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.]) | 
 | fi | 
 |  | 
 | AC_ARG_ENABLE(targets, | 
 | [  --enable-targets        alternative target configurations], | 
 | [case "${enableval}" in | 
 |   yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all') | 
 |             ;; | 
 |   no)       enable_targets= ;; | 
 |   *)        enable_targets=$enableval ;; | 
 | esac])dnl | 
 |  | 
 |  | 
 | AC_ARG_ENABLE(deterministic-archives, | 
 | [AS_HELP_STRING([--enable-deterministic-archives], | 
 | 		[ar and ranlib default to -D behavior])], [ | 
 | if test "${enableval}" = no; then | 
 |   default_ar_deterministic=0 | 
 | else | 
 |   default_ar_deterministic=1 | 
 | fi], [default_ar_deterministic=0]) | 
 |  | 
 | AC_DEFINE_UNQUOTED(DEFAULT_AR_DETERMINISTIC, $default_ar_deterministic, | 
 | 		   [Should ar and ranlib use -D behavior by default?]) | 
 |  | 
 |  | 
 | AC_ARG_ENABLE(default-strings-all, | 
 | [AS_HELP_STRING([--disable-default-strings-all], | 
 | 		[strings defaults to --data behavior])], [ | 
 | if test "${enableval}" = no; then | 
 |   default_strings_all=0 | 
 | else | 
 |   default_strings_all=1 | 
 | fi], [default_strings_all=1]) | 
 |  | 
 | AC_DEFINE_UNQUOTED(DEFAULT_STRINGS_ALL, $default_strings_all, | 
 | 		   [Should strings use -a behavior by default?]) | 
 |  | 
 |  | 
 | AC_ARG_ENABLE(f-for-ifunc-symbols, | 
 | [AS_HELP_STRING([--enable-f-for-ifunc-symbols], | 
 | 	[Have nm use F and f for global and local ifunc symbols])], [ | 
 | if test "${enableval}" = no; then | 
 |   default_f_for_ifunc=0 | 
 | else | 
 |   default_f_for_ifunc=1 | 
 | fi], [default_f_for_ifunc=0]) | 
 |  | 
 | AC_DEFINE_UNQUOTED(DEFAULT_F_FOR_IFUNC_SYMBOLS, $default_f_for_ifunc, | 
 | 		   [Have nm use F and f for global and local ifunc symbols]) | 
 |  | 
 |  | 
 | AC_ARG_ENABLE(follow-debug-links, | 
 | [AS_HELP_STRING([--enable-follow-debug-links], | 
 | 	[Have readelf and objdump follow debug links by default])], [ | 
 | if test "${enableval}" = no; then | 
 |   default_for_follow_links=0 | 
 | else | 
 |   default_for_follow_links=1 | 
 | fi], [default_for_follow_links=1]) | 
 |  | 
 | AC_DEFINE_UNQUOTED(DEFAULT_FOR_FOLLOW_LINKS, $default_for_follow_links, | 
 | 		   [Have readelf and objdump follow debug links by default]) | 
 |  | 
 |  | 
 | AC_DEBUGINFOD | 
 |  | 
 | GCC_ENABLE([libctf], [yes], [], [Handle .ctf type-info sections]) | 
 | if test "${enable_libctf}" = yes; then | 
 |     AC_DEFINE(ENABLE_LIBCTF, 1, [Handle .ctf type-info sections]) | 
 | fi | 
 | AM_CONDITIONAL(ENABLE_LIBCTF, test "${enable_libctf}" = yes) | 
 |  | 
 | AM_BINUTILS_WARNINGS | 
 |  | 
 | AC_CONFIG_HEADERS(config.h:config.in) | 
 |  | 
 | AH_VERBATIM([00_CONFIG_H_CHECK], | 
 | [/* Check that config.h is #included before system headers | 
 |    (this works only for glibc, but that should be enough).  */ | 
 | #if defined(__GLIBC__) && !defined(__FreeBSD_kernel__) && !defined(__CONFIG_H__) | 
 | #  error config.h must be #included before system headers | 
 | #endif | 
 | #define __CONFIG_H__ 1]) | 
 |  | 
 | if test -z "$target" ; then | 
 |     AC_MSG_ERROR(Unrecognized target system type; please check config.sub.) | 
 | fi | 
 | if test -z "$host" ; then | 
 |     AC_MSG_ERROR(Unrecognized host system type; please check config.sub.) | 
 | fi | 
 |  | 
 | AC_PROG_YACC | 
 | AM_PROG_LEX | 
 |  | 
 | ALL_LINGUAS="bg ca da es fi fr hr id it ja pt ro ru rw sk sr sv tr uk vi zh_CN zh_TW" | 
 | ZW_GNU_GETTEXT_SISTER_DIR | 
 | AM_PO_SUBDIRS | 
 |  | 
 | AM_MAINTAINER_MODE | 
 | AM_CONDITIONAL(GENINSRC_NEVER, false) | 
 | AC_EXEEXT | 
 | if test -n "$EXEEXT"; then | 
 |   AC_DEFINE(HAVE_EXECUTABLE_SUFFIX, 1, | 
 | 	    [Does the platform use an executable suffix?]) | 
 | fi | 
 | AC_DEFINE_UNQUOTED(EXECUTABLE_SUFFIX, "${EXEEXT}", | 
 | 		   [Suffix used for executables, if any.]) | 
 |  | 
 | # host-specific stuff: | 
 |  | 
 | HDEFINES= | 
 |  | 
 | . ${srcdir}/../bfd/configure.host | 
 |  | 
 | AC_SUBST(HDEFINES) | 
 | AR=${AR-ar} | 
 | AC_SUBST(AR) | 
 | AC_PROG_RANLIB | 
 | AC_PROG_INSTALL | 
 |  | 
 | BFD_CC_FOR_BUILD | 
 |  | 
 | DEMANGLER_NAME=c++filt | 
 | case "${host}" in | 
 |   *-*-go32* | *-*-msdos*) | 
 |     DEMANGLER_NAME=cxxfilt | 
 | esac | 
 | AC_SUBST(DEMANGLER_NAME) | 
 |  | 
 | AC_CHECK_SIZEOF([long]) | 
 | AC_CHECK_SIZEOF([long long]) | 
 |  | 
 | # We use headers from include/ that check various HAVE_*_H macros, thus | 
 | # should ensure they are set by configure.  This is true even when C99 | 
 | # guarantees they are available. | 
 | # plugin-api.h tests HAVE_STDINT_H and HAVE_INTTYPES_H | 
 | # Besides those, we need to check anything used in binutils/ not in C99. | 
 | AC_CHECK_HEADERS(fcntl.h inttypes.h stdint.h sys/file.h \ | 
 | 		 sys/stat.h sys/time.h sys/types.h unistd.h) | 
 | AC_HEADER_SYS_WAIT | 
 | AC_FUNC_MMAP | 
 | AC_CHECK_FUNCS(getc_unlocked mkdtemp mkstemp sbrk utimensat utimes) | 
 |  | 
 | AC_MSG_CHECKING([for mbstate_t]) | 
 | AC_TRY_COMPILE([#include <wchar.h>], | 
 | [mbstate_t teststate;], | 
 | have_mbstate_t=yes, have_mbstate_t=no) | 
 | AC_MSG_RESULT($have_mbstate_t) | 
 | if test x"$have_mbstate_t" = xyes; then | 
 |   AC_DEFINE(HAVE_MBSTATE_T,1,[Define if mbstate_t exists in wchar.h.]) | 
 | fi | 
 |  | 
 | # Copied from gnulib stat-time.m4. | 
 | # We should just switch over to using gnulib. | 
 | AC_CHECK_MEMBERS([struct stat.st_atim.tv_nsec], | 
 |   [AC_CACHE_CHECK([whether struct stat.st_atim is of type struct timespec], | 
 |      [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec], | 
 |      [AC_COMPILE_IFELSE([AC_LANG_PROGRAM( | 
 |         [[ | 
 |           #include <sys/types.h> | 
 |           #include <sys/stat.h> | 
 |           #if HAVE_SYS_TIME_H | 
 |           # include <sys/time.h> | 
 |           #endif | 
 |           #include <time.h> | 
 |           struct timespec ts; | 
 |           struct stat st; | 
 |         ]], | 
 |         [[ | 
 |           st.st_atim = ts; | 
 |         ]])], | 
 |         [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=yes], | 
 |         [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=no])]) | 
 |    if test $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec = yes; then | 
 |      AC_DEFINE([TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC], [1], | 
 |        [Define to 1 if the type of the st_atim member of a struct stat is | 
 |         struct timespec.]) | 
 |    fi], | 
 |   [AC_CHECK_MEMBERS([struct stat.st_atimespec.tv_nsec], [], | 
 |      [AC_CHECK_MEMBERS([struct stat.st_atimensec], [], | 
 |         [AC_CHECK_MEMBERS([struct stat.st_atim.st__tim.tv_nsec], [], [], | 
 |            [#include <sys/types.h> | 
 |             #include <sys/stat.h>])], | 
 |         [#include <sys/types.h> | 
 |          #include <sys/stat.h>])], | 
 |      [#include <sys/types.h> | 
 |       #include <sys/stat.h>])], | 
 |   [#include <sys/types.h> | 
 |    #include <sys/stat.h>]) | 
 |  | 
 | # Some systems have frexp only in -lm, not in -lc. | 
 | AC_SEARCH_LIBS(frexp, m) | 
 |  | 
 | AM_LC_MESSAGES | 
 |  | 
 | AC_MSG_CHECKING(for a known getopt prototype in unistd.h) | 
 | AC_CACHE_VAL(bu_cv_decl_getopt_unistd_h, | 
 | [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])], | 
 | bu_cv_decl_getopt_unistd_h=yes, bu_cv_decl_getopt_unistd_h=no)]) | 
 | AC_MSG_RESULT($bu_cv_decl_getopt_unistd_h) | 
 | if test $bu_cv_decl_getopt_unistd_h = yes; then | 
 |   AC_DEFINE([HAVE_DECL_GETOPT], 1, | 
 | 	    [Is the prototype for getopt in <unistd.h> in the expected format?]) | 
 | fi | 
 |  | 
 | # Under Next 3.2 <utime.h> apparently does not define struct utimbuf | 
 | # by default. | 
 | AC_MSG_CHECKING([for utime.h]) | 
 | AC_CACHE_VAL(bu_cv_header_utime_h, | 
 | [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <sys/types.h> | 
 | #ifdef HAVE_TIME_H | 
 | #include <time.h> | 
 | #endif | 
 | #include <utime.h>], | 
 | [struct utimbuf s;])], | 
 | bu_cv_header_utime_h=yes, bu_cv_header_utime_h=no)]) | 
 | AC_MSG_RESULT($bu_cv_header_utime_h) | 
 | if test $bu_cv_header_utime_h = yes; then | 
 |   AC_DEFINE(HAVE_GOOD_UTIME_H, 1, [Does <utime.h> define struct utimbuf?]) | 
 | fi | 
 |  | 
 | AC_CHECK_DECLS([asprintf, environ, getc_unlocked, sbrk, stpcpy, strnlen]) | 
 |  | 
 | # Link in zlib if we can.  This allows us to read compressed debug | 
 | # sections.  This is used only by readelf.c (objdump uses bfd for | 
 | # reading compressed sections). | 
 | AM_ZLIB | 
 |  | 
 | BFD_BINARY_FOPEN | 
 |  | 
 | # Support for the msgpack C library. | 
 | AC_ARG_WITH([msgpack], | 
 | 	    AC_HELP_STRING([--with-msgpack], [Enable msgpack support (auto/yes/no)]), | 
 | 	    [], | 
 | 	    [with_msgpack=auto]) | 
 |  | 
 |  | 
 | if test "$with_msgpack" != no; then | 
 |   PKG_CHECK_MODULES(MSGPACK, msgpack, [ | 
 |     AC_DEFINE([HAVE_MSGPACK], [1], [Define to 1 if msgpack is available.]) | 
 |   ], [ | 
 |       if test "$with_msgpack" = yes; then | 
 | 	AC_MSG_ERROR([--with-msgpack was given, but msgpack is missing or unusable.]) | 
 |       fi | 
 |   ]) | 
 | fi | 
 |  | 
 | # target-specific stuff: | 
 |  | 
 | # Canonicalize the secondary target names. | 
 | if test -n "$enable_targets"; then | 
 |     for targ in `echo $enable_targets | sed 's/,/ /g'` | 
 |     do | 
 | 	result=`$ac_config_sub $targ 2>/dev/null` | 
 | 	if test -n "$result"; then | 
 | 	    canon_targets="$canon_targets $result" | 
 | 	else | 
 | 	    # Allow targets that config.sub doesn't recognize, like "all". | 
 | 	    canon_targets="$canon_targets $targ" | 
 | 	fi | 
 |     done | 
 | fi | 
 |  | 
 | AC_CHECK_HEADER(iconv.h) | 
 | AM_ICONV | 
 |  | 
 | all_targets=false | 
 | BUILD_SRCONV= | 
 | BUILD_DLLTOOL= | 
 | DLLTOOL_DEFS= | 
 | DLLTOOL_DEFAULT= | 
 | BUILD_WINDRES= | 
 | BUILD_WINDMC= | 
 | BUILD_DLLWRAP= | 
 | BUILD_MISC= | 
 | BUILD_INSTALL_MISC= | 
 | OBJDUMP_DEFS= | 
 | OBJDUMP_PRIVATE_VECTORS= | 
 | OBJDUMP_PRIVATE_OFILES= | 
 | od_vectors= | 
 |  | 
 | for targ in $target $canon_targets | 
 | do | 
 |     if test "x$targ" = "xall"; then | 
 |         all_targets=true | 
 | 	BUILD_SRCONV='$(SRCONV_PROG)' | 
 | 	BUILD_MISC="${BUILD_MISC} "'bin2c$(EXEEXT_FOR_BUILD)' | 
 | 	BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	  DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_I386" | 
 | 	fi | 
 | 	DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" | 
 | 	BUILD_DLLWRAP='$(DLLWRAP_PROG)$(EXEEXT)' | 
 | 	od_vectors="$od_vectors objdump_private_desc_xcoff" | 
 |     else | 
 | 	case $targ in | 
 | 	*-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;; | 
 | 	esac | 
 |  | 
 | 	case $targ in | 
 | 	arm-wince-pe* | arm-*-wince | arm*-*-cegcc* | arm*-*-mingw32ce*) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_ARM_WINCE" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM_WINCE -DDLLTOOL_ARM" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | 	arm-*-pe*) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_ARM" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | 	x86_64-*-mingw* | x86_64-*-cygwin*) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_MX86_64" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MX86_64" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  BUILD_DLLWRAP='$(DLLWRAP_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | changequote(,)dnl | 
 | 	i[3-7]86-*-pe* | i[3-7]86-*-cygwin* | i[3-7]86-*-mingw32**) | 
 | changequote([,])dnl | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_I386" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  BUILD_DLLWRAP='$(DLLWRAP_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | changequote(,)dnl | 
 | 	i[3-7]86-*-interix) | 
 | changequote([,])dnl | 
 | 	  BUILD_DLLTOOL='$(DLLTOOL_PROG)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_I386" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" | 
 | 	  ;; | 
 | changequote(,)dnl | 
 | 	powerpc*-aix5.[01]) | 
 | changequote([,])dnl | 
 | 	  ;; | 
 | changequote(,)dnl | 
 | 	powerpc*-aix[5-9].*) | 
 | changequote([,])dnl | 
 | 	  OBJDUMP_DEFS="-DAIX_WEAK_SUPPORT" | 
 | 	  ;; | 
 | 	powerpc*-*-linux* | powerpc*-*-elf* | powerpc*-*-eabi*) | 
 | 	  case "$BUILD_INSTALL_MISC" in | 
 | 	    *embedspu*) ;; | 
 | 	    *) BUILD_INSTALL_MISC="${BUILD_INSTALL_MISC} embedspu" | 
 | 	  esac | 
 | 	  ;; | 
 | 	sh*-*-pe) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_SH" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_SH" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | 	spu-*-*) | 
 | 	  BUILD_MISC="${BUILD_MISC} "'bin2c$(EXEEXT_FOR_BUILD)' | 
 | 	  ;; | 
 | 	mips*-*-pe) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_MIPS" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MIPS" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | 	mcore-*-pe) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_MCORE" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MCORE" | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | 	  ;; | 
 | 	mcore-*-elf) | 
 |   	  BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' | 
 | 	  if test -z "$DLLTOOL_DEFAULT"; then | 
 | 	    DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_MCORE_ELF" | 
 | 	  fi | 
 | 	  DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MCORE_ELF" | 
 | 	  ;; | 
 |   	mep-*) | 
 | 	  OBJDUMP_DEFS="-DSKIP_ZEROES=256 -DSKIP_ZEROES_AT_END=0" | 
 | 	  ;; | 
 | 	esac | 
 |  | 
 | 	# Add objdump private vectors. | 
 | 	case $targ in | 
 | 	avr-*-*) | 
 | 	  od_vectors="$od_vectors objdump_private_desc_elf32_avr" | 
 | 	  ;; | 
 | 	powerpc*-*-aix* | rs6000-*-aix*) | 
 | 	  od_vectors="$od_vectors objdump_private_desc_xcoff" | 
 | 	  ;; | 
 |         *-*-darwin*) | 
 | 	  od_vectors="$od_vectors objdump_private_desc_mach_o" | 
 | 	  ;; | 
 | 	esac | 
 |     fi | 
 | done | 
 |  | 
 | # Uniq objdump private vector, build objdump target ofiles. | 
 | od_files= | 
 | f="" | 
 | for i in $od_vectors ; do | 
 |     case " $f " in | 
 |     *" $i "*) ;; | 
 |     *) | 
 | 	f="$f $i" | 
 | 	OBJDUMP_PRIVATE_VECTORS="$OBJDUMP_PRIVATE_VECTORS &$i," | 
 | 	case $i in | 
 | 	objdump_private_desc_elf32_avr) | 
 | 	    od_files="$od_files od-elf32_avr" ;; | 
 | 	objdump_private_desc_xcoff) | 
 | 	    od_files="$od_files od-xcoff" ;; | 
 | 	objdump_private_desc_mach_o) | 
 | 	    od_files="$od_files od-macho" ;; | 
 | 	*) AC_MSG_ERROR(*** unknown private vector $i) ;; | 
 | 	esac | 
 | 	;; | 
 |     esac | 
 | done | 
 |  | 
 | # Uniq objdump target ofiles | 
 | f="" | 
 | for i in $od_files ; do | 
 |     case " $f " in | 
 |     *" $i "*) ;; | 
 |     *) | 
 | 	f="$f $i" | 
 | 	OBJDUMP_PRIVATE_OFILES="$OBJDUMP_PRIVATE_OFILES $i.$objext" | 
 | 	;; | 
 |     esac | 
 | done | 
 |  | 
 | DLLTOOL_DEFS="$DLLTOOL_DEFS $DLLTOOL_DEFAULT" | 
 |  | 
 | if test "${with_windres+set}" = set; then | 
 | 	  BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' | 
 | fi | 
 |  | 
 | if test "${with_windmc+set}" = set; then | 
 | 	  BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)' | 
 | fi | 
 |  | 
 | OBJDUMP_DEFS="${OBJDUMP_DEFS} -DOBJDUMP_PRIVATE_VECTORS=\"${OBJDUMP_PRIVATE_VECTORS}\"" | 
 |  | 
 | AC_SUBST(BUILD_SRCONV) | 
 | AC_SUBST(BUILD_DLLTOOL) | 
 | AC_SUBST(DLLTOOL_DEFS) | 
 | AC_SUBST(BUILD_WINDRES) | 
 | AC_SUBST(BUILD_WINDMC) | 
 | AC_SUBST(BUILD_DLLWRAP) | 
 | AC_SUBST(BUILD_MISC) | 
 | AC_SUBST(BUILD_INSTALL_MISC) | 
 | AC_SUBST(OBJDUMP_DEFS) | 
 | AC_SUBST(OBJDUMP_PRIVATE_OFILES) | 
 |  | 
 | AC_DEFINE_UNQUOTED(TARGET, "${target}", [Configured target name.]) | 
 |  | 
 | targ=$target | 
 | . $srcdir/../bfd/config.bfd | 
 | if test "x$targ_underscore" = "xyes"; then | 
 |     UNDERSCORE=1 | 
 | else | 
 |     UNDERSCORE=0 | 
 | fi | 
 | AC_DEFINE_UNQUOTED(TARGET_PREPENDS_UNDERSCORE, $UNDERSCORE, | 
 |  [Define to 1 if user symbol names have a leading underscore, 0 if not.]) | 
 |  | 
 | # Emulation | 
 | targ=$target | 
 | . ${srcdir}/configure.tgt | 
 | EMULATION=$targ_emul | 
 | EMULATION_VECTOR=$targ_emul_vector | 
 |  | 
 | AC_SUBST(EMULATION) | 
 | AC_SUBST(EMULATION_VECTOR) | 
 |  | 
 | # Required for html and install-html | 
 | AC_SUBST(datarootdir) | 
 | AC_SUBST(docdir) | 
 | AC_SUBST(htmldir) | 
 | AC_SUBST(pdfdir) | 
 |  | 
 | AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in) | 
 | AC_OUTPUT | 
 |  | 
 | GNU_MAKE_JOBSERVER |