| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete SIM_AC_OPTION_RESERVED_BITS call. |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_EXTRA_HW_DEVICES): Define. |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Delete call. |
| * configure: Regenerate. |
| |
| 2021-06-20 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_COMMON): Delete. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-20 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c: Include sim-signal.h. |
| * op_utils.c, sim-main.h: Likewise. |
| * mn10300_sim.h: Delete sim-signal.h include. |
| |
| 2021-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete SIM_AC_OPTION_ENDIAN call. |
| * interp.c (sim_open): Set current_target_byte_order. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * mn10300_sim.h (u642dw, dw2u64): Change INLINE to INLINE2. |
| |
| 2021-06-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| * config.in: Removed. |
| |
| 2021-06-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-06-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete all to SIM_AC_OPTION_WARNINGS. |
| * configure: Regenerate. |
| |
| 2021-06-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * mn10300.igen: Change abort to sim_engine_abort. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-06-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_ENGINE_HALT_HOOK): Delete 0. |
| |
| 2021-06-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in: Replace $(IGEN) with $(IGEN_RUN) and ../igen/igen |
| with $(IGEN). |
| |
| 2021-05-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c [!SIGTRAP] (SIGTRAP): Define to 5. |
| |
| 2021-05-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete. |
| |
| 2021-05-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define. |
| (struct sim_state): Delete. |
| |
| 2021-05-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-mn103cpu.c, dv-mn103int.c, dv-mn103iop.c, dv-mn103ser.c, |
| dv-mn103tim.c, op_utils.c: Include defs.h. |
| * interp.c: Replace config.h include with defs.h. |
| |
| 2021-05-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-05-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * mn10300_sim.h: Update include path. |
| |
| 2021-05-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * op_utils.c: Delete sys/times.h include. |
| |
| 2021-05-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-05-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (NL_TARGET): Delete. |
| |
| 2021-04-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Delete first two args. |
| * configure: Regenerate. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * configure, config.in: Rebuild. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * Makefile.in (INCLUDE): Remove. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * Makefile.in (interp.o): Remove. |
| (idecode.o op_utils.o semantics.o): Remove. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * configure: Rebuild. |
| |
| 2021-04-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| |
| 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * configure: Regenerate. |
| |
| 2021-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete AC_CHECK_FUNCS & AC_CHECK_HEADERS calls. |
| * op_utils.c: Delete utime.h include. |
| * config.in, configure: Regenerate. |
| |
| 2021-04-15 John Baldwin <jhb@FreeBSD.org> |
| |
| * Makefile.in: (tmp-igen) Only pass mn10300.igen to igen. |
| * mn10300.igen: Include am33-2.igen. |
| |
| 2021-04-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all. |
| |
| 2021-04-08 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * Makefile.in: Set ASAN_OPTIONS when running igen. |
| |
| 2021-04-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (../igen/igen): Delete rule. |
| (tmp-igen): Delete ../igen make. |
| |
| 2021-04-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-28 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-02-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Delete call to STATE_WATCHPOINTS. |
| |
| 2021-02-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc. |
| |
| 2021-01-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| * interp.c, op_utils.c: Delete HAVE_STRING_H, HAVE_STRINGS_H, |
| HAVE_STDLIB_H, HAVE_TIME_H, and strings.h include. |
| |
| 2021-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no". |
| * configure: Regenerate. |
| |
| 2021-01-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2017-09-06 John Baldwin <jhb@FreeBSD.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_INLINE): Delete call. |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Mark argv const. |
| (sim_create_inferior): Mark argv and env const. |
| |
| 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Update sim_parse_args comment. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. |
| * configure: Regenerate. |
| |
| 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to |
| LITTLE. |
| * configure: Regenerate. |
| |
| 2015-12-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define. |
| (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE. |
| (sim_store_register): Rename to ... |
| (mn10300_reg_store): ... this. |
| (sim_fetch_register): Rename to ... |
| (mn10300_reg_fetch): ... this. |
| |
| 2015-12-27 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (MN10300_OBJS): Delete sim-hload.o. |
| |
| 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HANDLES_LMA): Delete. |
| |
| 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (WITH_WATCHPOINTS): Delete. |
| |
| 2015-11-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (mn10300_callback): Delete. |
| (sim_open): Delete mn10300_callback assignment. |
| (program_interrupt): Call sim_io_printf. |
| * mn10300_sim.h (mn10300_callback): Delete. |
| |
| 2015-11-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (WITH_CORE): Delete. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o. |
| |
| 2015-11-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_close): Delete. |
| |
| 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * op_utils.c (do_syscall): Replace call to cb_syscall with |
| sim_syscall_multi. |
| |
| 2015-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * mn10300_sim.h (syscall_read_mem, syscall_write_mem): Delete. |
| * op_utils.c: Include sim-syscall.h. |
| (syscall_read_mem, syscall_write_mem): Delete. |
| (do_syscall): Change syscall_read_mem/syscall_write_mem |
| to sim_syscall_read_mem/sim_syscall_write_mem. Set syscall.p2. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (get_byte, get_half, get_word, put_byte, put_half, |
| put_word): Delete. |
| (sim_fetch_register): Inline put_word call. |
| (sim_store_register): Inline get_word call. |
| * mn10300_sim.h (struct _state): Delete mem member. |
| (OP, Simops, get_byte, get_half, get_word, put_byte, put_half, |
| put_word, map): Delete. |
| * op_utils.c (MEMPTR): Delete. |
| |
| 2015-06-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (round_64, fpu_status_ok): Add static. |
| |
| 2015-06-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (mn10300_debug): Delete. |
| * mn10300_sim.h (DEBUG_TRACE, DEBUG_VALUES, mn10300_debug): Delete. |
| (struct _state): Delete exception and exited members. |
| [_WIN32] (SIGTRAP, SIGQUIT): Delete. |
| * op_utils.c (do_syscall): Call sim_engine_halt instead of setting |
| State.exception. |
| |
| 2015-06-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * mn10300_sim.h (uint8, int8, uint16, int16, uint32, int32): Typedef |
| in terms of unsigned8, signed8, unsigned16, signed16, unsigned32, |
| and signed32 respectively. |
| |
| 2015-06-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (INLINE): Delete define. |
| * mn10300_sim.h (INLINE): Likewise. |
| |
| 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_CPU): Delete. |
| |
| 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (sim_cia): Delete. |
| (SIM_ADDR): Delete comment. |
| |
| 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Change CIA_GET to |
| CPU_PC_GET and CIA_SET to CPU_PC_SET. |
| * interp.c (sim_create_inferior): Change CIA_SET to CPU_PC_SET. |
| (program_interrupt): Change CIA_GET to CPU_PC_GET and CIA_SET to |
| CPU_PC_SET. |
| (mn10300_cpu_exception_trigger): Change CIA_SET to CPU_PC_SET. |
| (mn10300_cpu_exception_suspend): Likewise. |
| (mn10300_cpu_exception_resume): Likewise. |
| * sim-main.h (CIA_GET, CIA_SET): Delete. |
| |
| 2015-04-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (MN10300_OBJS): Delete sim-cpu.o. |
| * sim-main.h (STATE_CPU): Delete. |
| |
| 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (MN10300_OBJS): Add sim-cpu.o. |
| * interp.c (mn10300_pc_get, mn10300_pc_set): New functions. |
| (sim_open): Declare new local var i. Call sim_cpu_alloc_all. |
| Call CPU_PC_FETCH & CPU_PC_STORE for all cpus. |
| (sim_pc_get): Delete. |
| * sim-main.h (null_cia, NULL_CIA): Delete. |
| (SIM_CPU): Define. |
| (struct sim_state): Change cpu to an array of pointers. |
| (STATE_CPU): Drop & and handle WITH_SMP. |
| |
| 2015-04-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o. |
| |
| 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_pc_get): New function. |
| |
| 2015-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (MN10300_OBJS): Delete dv-sockser.o. |
| |
| 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| * configure.ac: Delete SIM_DV_SOCKSER_O check. |
| |
| 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-03-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * tconfig.in: Delete file. |
| |
| 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_RUN_OBJS): Delete. |
| |
| 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h & |
| string.h & strings.h & time.h. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2014-08-19 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2014-08-15 Roland McGrath <mcgrathr@google.com> |
| |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2014-03-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2013-09-23 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2013-05-10 Freddie Chopin <freddie_chopin@op.pl> |
| |
| * configure: Rebuild. |
| |
| 2013-03-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| * configure.ac: Fail if dv-sockser.o not available. |
| Error when --disable-sim-hardware is specified. |
| * tconfig.in: Conditionalize use of dv_sockser_install. |
| * configure: Regenerated. |
| * config.in: Regenerated. |
| |
| 2012-06-17 Hans-Peter Nilsson <hp@axis.com> |
| |
| * interp.c: Include config.h first. Do not include sysdep.h. |
| |
| 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * config.in, configure: Regenerate. |
| |
| 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2012-02-16 Kevin Buettner <kevinb@redhat.com> |
| |
| * interp.c (sim_fetch_register): Return length, not -1. |
| |
| 2012-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * sim-main.h: Reformat copyright header. |
| |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: New file. |
| * configure: Regenerate. |
| |
| 2011-11-07 Mike Frysinger <vapier@gentoo.org> |
| |
| PR sim/9302 |
| * dv-mn103iop.c (write_dedicated_control_reg): Convert && to &. |
| |
| 2011-10-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate after common/acinclude.m4 update. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change include to common/acinclude.m4. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER |
| call. Replace common.m4 include with SIM_AC_COMMON. |
| * configure: Regenerate. |
| |
| 2011-07-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_do_command): Delete. |
| |
| 2011-06-20 Nick Clifton <nickc@redhat.com> |
| |
| * am33.igen (sub Rm,Rn,Rd): Fix computation of carry flag. |
| |
| 2011-01-11 Andrew Burgess <aburgess@broadcom.com> |
| |
| * interp.c (sim_store_register): Update return value to |
| match new API. |
| |
| 2010-04-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-mn103ser.c (sockser_addr, USE_SOCKSER_P): Delete |
| (do_polling_event): Change USE_SOCKSER_P to dv_sockser_status. |
| (read_status_reg): Likewise. |
| (write_txb): Likewise. |
| |
| 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * config.in: Regenerate. |
| * configure: Likewise. |
| |
| * configure: Regenerate. |
| |
| 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure: Regenerate to track ../common/common.m4 changes. |
| * config.in: Ditto. |
| |
| 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| Joseph Myers <joseph@codesourcery.com> |
| |
| * configure: Regenerate. |
| |
| 2006-12-21 Hans-Peter Nilsson <hp@axis.com> |
| |
| * acconfig.h: Remove. |
| * config.in: Regenerate. |
| |
| 2006-06-13 Richard Earnshaw <rearnsha@arm.com> |
| |
| * configure: Regenerated. |
| |
| 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * configure: Regenerated. |
| |
| 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * configure: Regenerated. |
| |
| 2006-03-29 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure: Regenerate. |
| |
| 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure: Regenerate. |
| |
| 2005-01-14 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Sinclude aclocal.m4 before common.m4. Add |
| explicit call to AC_CONFIG_HEADER. |
| * configure: Regenerate. |
| |
| 2005-01-12 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Update to use ../common/common.m4. |
| * configure: Re-generate. |
| |
| 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2005-01-07 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Rename configure.in, require autoconf 2.59. |
| * configure: Re-generate. |
| |
| 2004-12-08 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure: Regenerate for ../common/aclocal.m4 update. |
| |
| 2004-06-26 Alexandre Oliva <aoliva@redhat.com> |
| |
| 2000-08-07 Graham Stott <grahams@cygnus.co.uk> |
| * am33-2.igen (fmadd, fmsub, fmnadd, fmnsub): Correct typo. |
| 2000-05-29 Alexandre Oliva <aoliva@cygnus.com> |
| * interp.c (fpu_disabled_exception, fpu_unimp_exception, |
| fpu_check_signal_exception): Take additional state arguments. |
| Print exception type and call program_interrupt. Adjust callers. |
| (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div, |
| fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Take additional |
| arguments. |
| * mn10300_sim.h (fpu_disabled_exception, fpu_unimp_exception, |
| fpu_check_signal_exception): Adjust prototypes. |
| (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div, |
| fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Likewise. |
| * am33-2.igen: Adjust calls. |
| 2000-05-19 Alexandre Oliva <aoliva@cygnus.com> |
| * op_utils.c (cmp2fcc): Moved... |
| * interp.c: ... here. |
| 2000-05-18 Alexandre Oliva <aoliva@cygnus.com> |
| * am33-2.igen: Use `unsigned32', `signed32', `unsigned64' or |
| `signed64' where type width is relevant. |
| 2000-05-15 Alexandre Oliva <aoliva@cygnus.com> |
| * mn10300_sim.h: Include sim-fpu.h. |
| (FD2FPU, FPU2FD): Enclose the FD argument in parentheses. |
| (fpu_check_signal_exception): Declare. |
| (struct fp_prec_t, fp_single_prec, fp_double_prec): Likewise. |
| (FP_SINGLE, FP_DOUBLE): Shorthands for fp_*_prec. |
| (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div, |
| fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Declare. |
| * interp.c (fpu_disabled_exception): Document. |
| (fpu_unimp_exception): Likewise. |
| (fpu_check_signal_exception): Define. |
| (reg2val_32, round_32, val2reg_32, fp_single_prec): Likewise. |
| (reg2val_64, round_64, val2reg_64, fp_double_prec): Likewise. |
| (REG2VAL, ROUND, VAL2REG): Define shorthands. |
| (fpu_status_ok): Define. |
| (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div, |
| fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Define. |
| * am33-2.igen (frsqrt, fcmp, fadd, fsub, fmul, fdiv, |
| fmadd, fmsub, fnmadd, fnmsub): Use new functions. |
| 2000-04-27 Alexandre Oliva <aoliva@cygnus.com> |
| * interp.c (sim_create_inferior): Set PSW bit to enable FP insns |
| if architecture is AM33/2.0. |
| * am33.igen: Include am33-2.igen. |
| 2000-04-23 Alexandre Oliva <aoliva@cygnus.com> |
| * mn10300.igen (movm, call, ret, retf): Check for am33_2 too. |
| * am33.igen (movm): Likewise. |
| 2000-04-19 Alexandre Oliva <aoliva@cygnus.com> |
| * am33.igen: Added `*am33_2' to some instructions that were |
| missing it. |
| 2000-04-07 Alexandre Oliva <aoliva@cygnus.com> |
| * am33-2.igen: New file. All insns implemented, but FP flags are |
| only set for fcmp, exceptional conditions are not handled yet. |
| * Makefile.in (IGEN_INSN): Added am33-2.igen. |
| (tmp-igen): Added -M am33_2. |
| * mn10300.igen, am33.igen: Added `*am33_2' to all insns. |
| * gencode.c: Support FMT_D3. |
| * mn10300_sim.h (dword): New type. |
| (struct _state): Added fpregs. |
| (REG_FPCR, FPCR): New define. All assorted bitmaps. |
| (XS2FS, AS2FS, Xf2FD): New macros. |
| (FS2FPU, FD2FPU, FPU2FS, FPU2FD): Likewise. |
| (load_dword, store_dword): New functions or macros. |
| (u642dw, dw2u64): New functions. |
| (fpu_disabled_exception, fpu_unimp_exception): Declared. |
| * interp.c (fpu_disabled_exception): Defined; no actual |
| implementation. |
| (fpu_unimp_exception): Likewise. |
| * op_utils.c (cmp2fcc): New function. |
| |
| * interp.c, mn10300_sim.h, op_utils.c: Convert function prototypes |
| and definitions to ISO C. |
| |
| * gencode.c, simops.c: Delete. |
| * Makefile.in: Remove non-COMMON dependencies and commands. |
| |
| * configure.in: Use common simulator always. Don't subst sim_gen |
| nor mn10300_common. |
| * configure: Rebuilt. |
| * Makefile.in (WITHOUT_COMMON_OBJS, WITHOUT_COMMON_INTERP_DEP, |
| WITHOUT_COMMON_RUN_OBJS): Remove. |
| (WITH_COMMON_OBJS): Rename to MN10300_OBJS. |
| (WITH_COMMON_INTERP_DEP): Rename to MN10300_INTERP_DEP. |
| (WITH_COMMON_RUN_OBJS): Rename to SIM_RUN_OBJS. |
| (SIM_EXTRA_CFLAGS): Don't use @sim_gen@. |
| * interp.c: Remove non-common bits. |
| * mn10300_sim.h: Likewise. |
| |
| 2003-08-28 Andrew Cagney <cagney@redhat.com> |
| |
| * dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to |
| "long". |
| (read_status_reg): Cast "serial_reg" to "long". |
| * dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to |
| "long". |
| (do_counter6_event, write_mode_reg, write_tm6md): Ditto. |
| |
| 2003-02-27 Andrew Cagney <cagney@redhat.com> |
| |
| * interp.c (sim_open, sim_create_inferior, sim_open) |
| (sim_create_inferior): Rename _bfd to bfd. |
| |
| 2003-02-26 Andrew Cagney <cagney@redhat.com> |
| |
| * am33.igen: Call sim_engine_abort instead of abort. |
| |
| 2003-02-26 David Carlton <carlton@math.stanford.edu> |
| |
| * dv-mn103tim.c (read_special_timer6_reg): Add break after |
| empty default: label. |
| (write_special_timer6_reg): Ditto. |
| Update copyright. |
| |
| 2002-11-28 Andrew Cagney <cagney@redhat.com> |
| |
| * sim-main.h: Only include "idecode.h" once. |
| * Makefile.in (SIM_EXTRA_DEPS): Define. |
| |
| 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2002-06-09 Andrew Cagney <cagney@redhat.com> |
| |
| * Makefile.in (INCLUDE): Update path to callback.h. |
| * mn10300_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h". |
| * tconfig.in: Ditto. |
| |
| 2001-05-06 Jim Blandy <jimb@redhat.com> |
| |
| * mn10300.igen: Doc fixes. |
| |
| 2001-04-26 Alexandre Oliva <aoliva@redhat.com> |
| |
| * Makefile.in (idecode.o, op_utils.o, semantics.o, simops.o): |
| Depend on targ-vals.h. |
| |
| 2001-04-15 J.T. Conklin <jtc@redback.com> |
| |
| * Makefile.in (simops.o): Add simops.h to dependency list. |
| |
| Wed Aug 9 02:24:53 2000 Graham Stott <grahams@cygnus.co.uk> |
| |
| * am33.igen: Warning clean-up. |
| (movm): Initialize PC and mask. |
| (mov, movbu, movhu): Set srcreg2 from RI0. |
| (bsch): Initialize c. |
| (sat16_cmp): Actually do the comparison. |
| (mov_llt): Do not overwrite dstreg with uninitialized variable. |
| |
| Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2000-05-22 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * am33.igen: Fix leading comments of SP-relative offset insns that |
| referred to other registers. Make their offsets unsigned. |
| |
| 2000-05-18 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr, |
| genericXor, genericBtst): Use `unsigned32'. |
| * op_utils.c: Likewise. |
| * mn10300.igen, am33.igen: Use `unsigned32', `signed32', |
| `unsigned64' or `signed64' where type width is relevant. |
| |
| 2000-04-25 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * am33.igen (inc4 Rn): Use genericAdd so as to modify flags. |
| |
| 2000-04-09 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * am33.igen: Make SP-relative offsets unsigned. Add `*am33' for |
| some instructions that were missing it. |
| |
| 2000-03-03 Alexandre Oliva <oliva@lsd.ic.unicamp.br> |
| |
| * Makefile.in (IGEN_INSN): Added am33.igen. |
| |
| Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Tue Jul 13 13:26:20 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c: Clarify error message reporting an unknown board. |
| |
| 1999-05-08 Felix Lee <flee@cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 1999-04-16 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * interp.c (program_interrupt): Detect undesired recursion using |
| static flag. Set NMIRC register's SYSEF flag during |
| --board=stdeval1 mode. |
| * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to |
| set SYSEF flag. |
| |
| 1999-04-02 Keith Seitz <keiths@cygnus.com> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL |
| for use in the simulator so that the poll_quit callback is |
| not called too often. |
| |
| Tue Mar 9 21:26:41 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * dv-mn103int.c (mn103int_ioctl): Return something. |
| * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around && |
| within ||. |
| |
| Tue Feb 16 23:57:17 1999 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300.igen (retf): Fix return address computation and store |
| the new pc value into nia. |
| |
| 1998-12-29 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o. |
| * interp.c (sim_open): Add stub mn103002 cache control memory regions. |
| Set OPERATING_ENVIRONMENT on "stdeval1" board. |
| (mn10300_core_signal): New function to intercept memory errors. |
| (program_interrupt): New function to dispatch to exception vector |
| (mn10300_exception_*): New functions to snapshot pre/post exception |
| state. |
| * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal. |
| (SIM_ENGINE_HALT_HOOK): Do nothing. |
| (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*(). |
| (_sim_cpu): Add exc_* fields to store register value snapshots. |
| * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O. |
| Various endianness and warning fixes. |
| * mn10300.igen (illegal): Call program_interrupt on error. |
| (break): Call program_interrupt on breakpoint |
| |
| Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com> |
| merged in: |
| * dv-mn103int.c (mn103int_ioctl): New function for NMI |
| generation. (mn103int_finish): Install it as ioctl handler. |
| * dv-mn103tim.c: Support timer 6 specially. Endianness fixes. |
| |
| Wed Oct 14 12:11:05 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Allow autoincrement stores using the same register |
| for source and destination operands. |
| |
| Mon Aug 31 10:19:55 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu". |
| |
| Fri Aug 28 14:40:49 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * interp.c (sim_open): Check for invalid --board option, fix |
| indentation, allocate memory for mem control and DMA regs. |
| |
| Wed Aug 26 09:29:38 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * mn10300.igen (div,divu): Fix divide instructions so divide by 0 |
| behaves like the hardware. |
| |
| Mon Aug 24 11:50:09 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA. |
| |
| Wed Aug 12 12:36:07 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Handle case where first DSP operation modifies a |
| register used in the second DSP operation correctly. |
| |
| Tue Jul 28 10:10:25 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Detect cases where two operands must not match for |
| DSP instructions too. |
| |
| Mon Jul 27 12:04:17 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Detect cases where two operands must not match in |
| non-DSP instructions. |
| |
| Fri Jul 24 18:15:21 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * op_utils.c (do_syscall): Rewrite to use common/syscall.c. |
| (syscall_read_mem, syscall_write_mem): New functions for syscall |
| callbacks. |
| * mn10300_sim.h: Add prototypes for syscall_read_mem and |
| syscall_write_mem. |
| * mn10300.igen: Change C++ style comments to C style comments. |
| Check for divide by zero in div and divu ops. |
| |
| Fri Jul 24 12:49:28 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen (translate_xreg): New function. Use it as needed. |
| |
| Thu Jul 23 10:05:28 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Add some missing instructions. |
| |
| * am33.igen: Autoincrement loads/store fixes. |
| |
| Tue Jul 21 09:48:14 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen: Add mov_lCC DSP instructions. |
| |
| * am33.igen: Add most am33 DSP instructions. |
| |
| Thu Jul 9 10:06:55 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300.igen: Fix Z bit for addc and subc instructions. |
| Minor fixes in multiply/divide patterns. |
| |
| * am33.igen: Add missing mul[u] imm32,Rn. Fix condition code |
| handling for many instructions. Fix sign extension for some |
| 24bit immediates. |
| |
| * am33.igen: Fix Z bit for remaining addc/subc instructions. |
| Do not sign extend immediate for mov imm,XRn. |
| More random mul, mac & div fixes. |
| Remove some unused variables. |
| Sign extend 24bit displacement in memory addresses. |
| |
| * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various |
| fixes to 2 register multiply, divide and mac instructions. Set |
| Z,N correctly for sat16. Sign extend 24 bit immediate for add, |
| and sub instructions. |
| |
| * am33.igen: Add remaining non-DSP instructions. |
| |
| Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * am33.igen (translate_rreg): New function. Use it as appropriate. |
| |
| * am33.igen: More am33 instructions. Fix "div". |
| |
| Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300.igen: Add am33 support. |
| |
| * Makefile.in: Use multi-sim to support both a mn10300 and am33 |
| simulator. |
| |
| * am33.igen: Add many more am33 instructions. |
| |
| Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300_sim.h (FETCH24): Define. |
| |
| * mn10300_sim.h: Add defines for some registers found on the AM33. |
| * am33.igen: New file with some am33 support. |
| |
| Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300_sim.h: Include bfd.h |
| (struct state): Add more room for processor specific registers. |
| (REG_E0): Define. |
| |
| Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * dv-mn103tim.c: Include sim-assert.h |
| * dv-mn103ser.c (do_polling_event): Check for incoming data on |
| serial line and schedule next polling event. |
| (read_status_reg): schedule events to check for incoming data on |
| serial line and issue interrupt if necessary. |
| |
| Fri Jun 19 16:47:27 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo). |
| |
| Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * interp.c (board): Rename am32 to stdeval1 as this is the name |
| consistently used to refer to the mn1030002 board. |
| |
| Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com> |
| * interp.c (sim_open): Fix typo in address of EXTMD register |
| (0x34000280, not 0x3400280). |
| |
| Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (syscall): Handle change in opcode # for syscall. |
| * mn10300.igen (syscall): Likewise. |
| |
| Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com> |
| * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or |
| reset) are not enabled on reset. |
| |
| Sun June 14 17:04:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o |
| register bits. |
| * dv-mn103ser.c: Fill in methods for reading and writing to serial |
| device registers. |
| * interp.c (sim_open): Make the serial device a polling device. |
| |
| Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| * dv-mn103iop.c: New file for handling am32 io ports. |
| * configure.in: Add mn103iop to hw_device list. |
| * configure: Re-generate. |
| * interp.c (sim_open): Create io port device. |
| |
| Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| * dv-mn103int.c (external_group): Use enumerated types to access |
| correct group addresses. |
| * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer |
| triggers an interrupt on the higher-numbered timer's port. |
| |
| Mon June 8 13:30:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| * interp.c: (mn10300_option_handler): New function parses arguments |
| using sim-options. |
| * (board): Add --board option for specifying am32. |
| * (sim_open): Create new timer and serial devices and control |
| configuration of other am32 devices via board option. |
| * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices. |
| * dv-mn103cpu.c: Fix typos in opening comments. |
| * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30. |
| * configure.in: Add mn103tim and mn103ser to hw_device list. |
| * configure: Re-generate. |
| |
| Mon May 25 20:50:35 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method. |
| |
| * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and |
| sim-main.h. Declare a struct hw_descriptor instead of struct |
| hw_device_descriptor. |
| |
| Mon May 25 17:33:33 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler |
| to struct hw_event. |
| |
| Fri May 22 12:17:41 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes". |
| |
| Wed May 6 13:29:06 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_open): Create a polling PAL device. |
| |
| Fri May 1 16:39:15 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * dv-mn103int.c (mn103int_port_event): |
| (mn103int_port_event): |
| (mn103int_io_read_buffer): |
| (mn103int_io_write_buffer): |
| |
| * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args. |
| (mn103cpu_port_event): Ditto. |
| (mn103cpu_io_read_buffer): Ditto. |
| (mn103cpu_io_write_buffer): Ditto. |
| |
| Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Sun Apr 26 15:19:55 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * acconfig.h: New file. |
| * configure.in: Reverted change of Apr 24; use sinclude again. |
| |
| Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Fri Apr 24 11:19:07 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * configure.in: Don't call sinclude. |
| |
| Tue Apr 14 10:03:02 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mn10300_sim.h: Declare all functions in op_utils.c using |
| INLINE_SIM_MAIN. |
| * op_utils.c: Ditto. |
| * sim-main.c: New file. Include op_utils.c. |
| |
| * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to |
| differentiate between MOV/CMP immediate/register instructions. |
| |
| * configure.in (SIM_AC_OPTION_INLINE): Add and enable. |
| * configure: Regenerate. |
| |
| Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (hw): Delete variable, moved to SIM_DESC. |
| (sim_open): Delete calls to hw_tree_create, hw_tree_finish. |
| Handled by sim-module. |
| (sim_open): Do not anotate tree with trace properties, handled by |
| sim-hw.c |
| (sim_open): Call sim_hw_parse instead of hw_tree_parse. |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Thu Mar 26 20:46:18 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> |
| |
| * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Save the entire PC |
| on the stack when delivering interrupts (not just the lower |
| half)... |
| * mn10300.igen (mov (Di,Am),Dn): Fix decode. Registers were |
| specified in the wrong order. |
| |
| Fri Mar 27 00:56:40 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of |
| succeeding interrupts, clear pending_handler when the handler |
| isn't re-scheduled. |
| |
| Thu Mar 26 10:11:01 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> |
| |
| * Makefile.in (tmp-igen): Prefix all usage of move-if-change |
| script with $(SHELL) to make NT native builds happy. |
| * configure: Regenerate because of change to ../common/aclocal.m4. |
| |
| Thu Mar 26 11:22:31 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in: Make --enable-sim-common the default. |
| * configure: Re-generate. |
| |
| * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction |
| address into Sate.regs[REG_PC] instead of common struct. |
| |
| Wed Mar 25 17:42:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value. |
| |
| Wed Mar 25 12:08:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| * simops.c (OP_F0FD): Initialise variable 'sp'. |
| |
| Thu Mar 26 00:21:32 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * dv-mn103int.c (decode_group): A group register every 4 bytes not |
| 8. |
| (write_icr): Rewrite equation updating request field. |
| (read_iagr): Fix check that interrupt is still pending. |
| |
| Wed Mar 25 16:14:50 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_open): Tidy up device creation. |
| |
| * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero |
| value. |
| (mn103int_io_read_buffer): Convert absolute address to register |
| block offsets. |
| (read_icr, write_icr): Convert block offset into group offset. |
| |
| Wed Mar 25 15:08:49 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_open): Create second 1mb memory region at |
| 0x40000000. |
| (sim_open): Create a device tree. |
| (sim-hw.h): Include. |
| (do_interrupt): Delete, needs to use dv-mn103cpu.c |
| |
| * dv-mn103int.c, dv-mn103cpu.c: New files. |
| |
| Wed Mar 25 08:47:38 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM): |
| Define. |
| (SP): Define. |
| |
| Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Mar 25 10:24:48 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim-options.h): Include. |
| (sim_kind, myname): Declare when not using common framework. |
| |
| * mn10300_sim.h (do_syscall, generic*): Provide prototypes for |
| functions found in op_utils.c |
| |
| * mn10300.igen (add): Discard unused variables. |
| |
| * configure, config.in: Re-generate with autoconf 2.12.1. |
| |
| Tue Mar 24 15:27:00 1998 Joyce Janczyn <janczyn@cygnus.com> |
| |
| Add support for --enable-sim-common option. |
| * Makefile.in (WITHOUT_COMMON_OBJS): Files included if |
| ! --enable-sim-common |
| (WITH_COMMON_OBJS): Files included if --enable-sim-common. |
| (MN10300_OBJS,MN10300_INTERP_DEP): New variables. |
| (SIM_OBJS): Rewrite. |
| ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables. |
| (SIM_EXTRA_CFLAGS): New variable. |
| (clean-extra): Clean up igen files. |
| (../igen/igen,clean-igen,tmp-igen): New rules. |
| * configure.in: Add support for common framework via |
| --enable-sim-common. |
| * configure: Regenerate. |
| * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h. |
| (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON. |
| (init_system,sim_write,compare_simops): Likewise. |
| (sim_set_profile,sim_set_profile_size): Likewise. |
| (sim_stop,sim_resume,sim_trace,sim_info): Likewise. |
| (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise. |
| (enum interrupt_type): New enum. |
| (interrupt_names): New global. |
| (do_interrupt): New function. |
| (sim_open): Define differently if WITH_COMMON. |
| (sim_close,sim_create_inferior,sim_do_command): Likewise. |
| * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions |
| for WITH_COMMON. |
| * mn10300.igen: New file. |
| * mn10300.dc: New file. |
| * op_utils.c: New file. |
| * sim-main.h: New file. |
| |
| Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Feb 27 18:36:04 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (inc): Fix typo. |
| |
| Wed Feb 25 01:59:29 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (signed multiply instructions): Cast input operands to |
| signed32 before casting them to signed64 so that the sign bit |
| is propagated properly. |
| |
| Mon Feb 23 20:23:19 1998 Mark Alexander <marka@cygnus.com> |
| |
| * Makefile.in: Last change was bad. Define NL_TARGET |
| so that targ-vals.h will be used instead of syscall.h. |
| * simops.c: Use targ-vals.h instead of syscall.h. |
| (OP_F020): Disable unsupported system calls. |
| |
| Mon Feb 23 09:44:38 1998 Mark Alexander <marka@cygnus.com> |
| |
| * Makefile.in: Get header files from libgloss/mn10300/sys. |
| |
| Sun Feb 22 16:02:24 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Include sim-types.h. |
| |
| Wed Feb 18 13:07:08 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (multiply instructions): Cast input operands to a |
| signed64/unsigned64 type as appropriate. |
| |
| Tue Feb 17 12:47:16 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_store_register, sim_fetch_register): Pass in |
| length parameter. Return -1. |
| |
| Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Tue Nov 11 10:38:52 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (call:16 call:32): Stack adjustment is determined solely |
| by the imm8 field. |
| |
| Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_load): Pass lma_p and sim_write args to |
| sim_load_file. |
| |
| Tue Oct 21 10:12:03 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Correctly handle register restores for "ret" and "retf" |
| instructions. |
| |
| Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Tue Aug 26 10:41:07 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_kill): Delete. |
| (sim_create_inferior): Add ABFD argument. |
| (sim_load): Move setting of PC from here. |
| (sim_create_inferior): To here. |
| |
| Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Mon Aug 25 16:14:44 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_open): Add ABFD argument. |
| |
| Tue Jun 24 13:46:20 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (sim_resume): Clear State.exited. |
| (sim_stop_reason): If State.exited is nonzero, then indicate that |
| the simulator exited instead of stopped. |
| * mn10300_sim.h (struct _state): Add exited field. |
| * simops.c (syscall): Set State.exited for SYS_exit. |
| |
| Wed Jun 11 22:07:56 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix thinko in last change. |
| |
| Tue Jun 10 12:31:32 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: "call" stores the callee saved registers into the |
| stack! Update the stack pointer properly when done with |
| register saves. |
| |
| * simops.c: Fix return address computation for "call" instructions. |
| |
| Thu May 22 01:43:11 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (sim_open): Fix typo. |
| |
| Wed May 21 23:27:58 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (sim_resume): Add missing case in big switch |
| statement (for extb instruction). |
| |
| Tue May 20 17:51:30 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c: Replace all references to load_mem and store_mem |
| with references to load_byte, load_half, load_3_byte, load_word |
| and store_byte, store_half, store_3_byte, store_word. |
| (INLINE): Delete definition. |
| (load_mem_big): Likewise. |
| (max_mem): Make it global. |
| (dispatch): Make this function inline. |
| (load_mem, store_mem): Delete functions. |
| * mn10300_sim.h (INLINE): Define. |
| (RLW): Delete unused definition. |
| (load_mem, store_mem): Delete declarations. |
| (load_mem_big): New definition. |
| (load_byte, load_half, load_3_byte, load_word): New functions. |
| (store_byte, store_half, store_3_byte, store_word): New functions. |
| * simops.c: Replace all references to load_mem and store_mem |
| with references to load_byte, load_half, load_3_byte, load_word |
| and store_byte, store_half, store_3_byte, store_word. |
| |
| Tue May 20 10:21:51 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_open): Add callback to arguments. |
| (sim_set_callbacks): Delete SIM_DESC argument. |
| |
| Mon May 19 13:54:22 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (dispatch): Make this an inline function. |
| |
| * simops.c (syscall): Use callback->write regardless of |
| what file descriptor we're writing too. |
| |
| Sun May 18 16:46:31 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (load_mem_big): Remove function. It's now a macro |
| defined elsewhere. |
| (compare_simops): New function. |
| (sim_open): Sort the Simops table before inserting entries |
| into the hash table. |
| * mn10300_sim.h: Remove unused #defines. |
| (load_mem_big): Define. |
| |
| Fri May 16 16:36:17 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (load_mem): If we get a load from an out of range |
| address, abort. |
| (store_mem): Likewise for stores. |
| (max_mem): New variable. |
| |
| Tue May 6 13:24:36 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300_sim.h: Fix ordering of bits in the PSW. |
| |
| * interp.c: Improve hashing routine to avoid long list |
| traversals for common instructions. Add HASH_STAT support. |
| Rewrite opcode dispatch code using a big switch instead of |
| cascaded if/else statements. Avoid useless calls to load_mem. |
| |
| Mon May 5 18:07:48 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300_sim.h (struct _state): Add space for mdrq register. |
| (REG_MDRQ): Define. |
| * simops.c: Don't abort for trap. Add support for the extended |
| instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24", |
| and "bsch". |
| |
| Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Apr 18 14:04:04 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * interp.c (sim_stop): Add stub function. |
| |
| Thu Apr 17 03:26:59 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Add sim-load.o. |
| * interp.c (sim_kind, myname): New static locals. |
| (sim_open): Set sim_kind, myname. Ignore -E arg. |
| (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to |
| load file into simulator. Set start address from bfd. |
| (sim_create_inferior): Return SIM_RC. Delete arg start_address. |
| |
| Wed Apr 16 19:30:44 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime |
| only include if implemented by host. |
| (OP_F020): Typecast arg passed to time function; |
| |
| Mon Apr 7 23:57:49 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (syscall): Handle new mn10300 calling conventions. |
| |
| Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Fri Apr 4 20:02:37 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match |
| corresponding change in opcodes directory. |
| |
| Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * interp.c (sim_open): New arg `kind'. |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Thu Mar 20 11:58:02 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix register extraction for a two "movbu" variants. |
| Somewhat simplify "sub" instructions. |
| Correctly sign extend operands for "mul". Put the correct |
| half of the result in MDR for "mul" and "mulu". |
| Implement remaining instructions. |
| Tweak opcode for "syscall". |
| |
| Tue Mar 18 14:21:21 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Do syscall emulation in "syscall" instruction. Add |
| dummy "trap" instruction. |
| |
| Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Re-generate. |
| |
| Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * configure: Regenerate to track ../common/aclocal.m4 changes. |
| |
| Thu Mar 13 12:54:45 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * interp.c (sim_open): New SIM_DESC result. Argument is now |
| in argv form. |
| (other sim_*): New SIM_DESC argument. |
| |
| Wed Mar 12 15:04:00 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix carry bit computation for "add" instructions. |
| |
| * simops.c: Fix typos in bset insns. Fix arguments to store_mem |
| for bset imm8,(d8,an) and bclr imm8,(d8,an). |
| |
| Wed Mar 5 15:00:10 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix register references when computing Z and N bits |
| for lsr imm8,dn. |
| |
| Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (@COMMON_MAKEFILE_FRAG): Use |
| COMMON_{PRE,POST}_CONFIG_FRAG instead. |
| * configure.in: sinclude ../common/aclocal.m4. |
| * configure: Regenerated. |
| |
| Fri Jan 24 10:47:25 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (init_system): Allocate 2^19 bytes of space for the |
| simulator. |
| |
| Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure configure.in Makefile.in: Update to new configure |
| scheme which is more compatible with WinGDB builds. |
| * configure.in: Improve comment on how to run autoconf. |
| * configure: Re-run autoconf to get new ../common/aclocal.m4. |
| * Makefile.in: Use autoconf substitution to install common |
| makefile fragment. |
| |
| Tue Jan 21 15:03:04 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Undo last change to "rol" and "ror", original code |
| was correct! |
| |
| Thu Jan 16 11:28:14 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix "rol" and "ror". |
| |
| Wed Jan 15 06:45:58 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix typo in last change. |
| |
| Mon Jan 13 13:22:35 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Use REG macros in few places not using them yet. |
| |
| Mon Jan 6 16:21:19 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300_sim.h (struct _state): Fix number of registers! |
| |
| Tue Dec 31 16:20:41 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300_sim.h (struct _state): Put all registers into a single |
| array to make gdb implementation easier. |
| (REG_*): Add definitions for all registers in the state array. |
| (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros. |
| * simops.c: Related changes. |
| |
| Wed Dec 18 10:10:45 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * interp.c (sim_resume): Handle 0xff as a single byte insn. |
| |
| * simops.c: Fix overflow computation for "add" and "inc" |
| instructions. |
| |
| Mon Dec 16 10:03:52 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Handle "break" instruction. |
| |
| * simops.c: Fix restoring the PC for "ret" and "retf" instructions. |
| |
| Wed Dec 11 09:53:10 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * gencode.c (write_opcodes): Also write out the format of the |
| opcode. |
| * mn10300_sim.h (simops): Add "format" field. |
| * interp.c (sim_resume): Deal with endianness issues here. |
| |
| Tue Dec 10 15:05:37 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (REG0_4): Define. |
| Use REG0_4 for indexed loads/stores. |
| |
| Sat Dec 7 09:50:28 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c (REG0_16): Fix typo. |
| |
| Fri Dec 6 14:13:34 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Call abort for any instruction that's not currently |
| simulated. |
| |
| * simops.c: Define accessor macros to extract register |
| values from instructions. Use them consistently. |
| |
| * interp.c: Delete unused global variable "OP". |
| (sim_resume): Remove unused variable "opcode". |
| * simops.c: Fix some uninitialized variable problems, add |
| parens to fix various -Wall warnings. |
| |
| * gencode.c (write_header): Add "insn" and "extension" arguments |
| to the OP_* declarations. |
| (write_template): Similarly for function templates. |
| * interp.c (insn, extension): Remove global variables. Instead |
| pass them as arguments to the OP_* functions. |
| * mn10300_sim.h: Remove decls for "insn" and "extension". |
| * simops.c (OP_*): Accept "insn" and "extension" as arguments |
| instead of using globals. |
| |
| Thu Dec 5 22:26:31 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)" |
| |
| * simops.c: Fix thinkos in last change to "inc dn". |
| |
| Wed Dec 4 10:57:53 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: "add imm,sp" does not effect the condition codes. |
| "inc dn" does effect the condition codes. |
| |
| Tue Dec 3 17:37:45 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Treat both operands as signed values for |
| "div" instruction. |
| |
| * simops.c: Fix simulation of division instructions. |
| Fix typos/thinkos in several "cmp" and "sub" instructions. |
| |
| Mon Dec 2 12:31:40 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix carry bit handling in "sub" and "cmp" |
| instructions. |
| |
| * simops.c: Fix "mov imm8,an" and "mov imm16,dn". |
| |
| Sun Dec 1 16:05:42 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix overflow computation for many instructions. |
| |
| * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)". |
| |
| * simops.c: Fix "mov am, dn". |
| |
| * simops.c: Fix more bugs in "add imm,an" and |
| "add imm,dn". |
| |
| Wed Nov 27 09:20:42 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Fix bugs in "movm" and "add imm,an". |
| |
| * simops.c: Don't lose the upper 24 bits of the return |
| pointer in "call" and "calls" instructions. Rough cut |
| at emulated system calls. |
| |
| * simops.c: Implement the remaining 5, 6 and 7 byte instructions. |
| |
| * simops.c: Implement remaining 4 byte instructions. |
| |
| * simops.c: Implement remaining 3 byte instructions. |
| |
| * simops.c: Implement remaining 2 byte instructions. Call |
| abort for instructions we're not implementing now. |
| |
| Tue Nov 26 15:43:41 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * simops.c: Implement lots of random instructions. |
| |
| * simops.c: Implement "movm" and "bCC" insns. |
| |
| * mn10300_sim.h (_state): Add another register (MDR). |
| (REG_MDR): Define. |
| * simops.c: Implement "cmp", "calls", "rets", "jmp" and |
| a few additional random insns. |
| |
| * mn10300_sim.h (PSW_*): Define for CC status tracking. |
| (REG_D0, REG_A0, REG_SP): Define. |
| * simops.c: Implement "add", "addc" and a few other random |
| instructions. |
| |
| * gencode.c, interp.c: Snapshot current simulator code. |
| |
| Mon Nov 25 12:46:38 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * Makefile.in, config.in, configure, configure.in: New files. |
| * gencode.c, interp.c, mn10300_sim.h, simops.c: New files. |
