| /* 32-bit ELF support for TI PRU. |
| Copyright (C) 2014-2024 Free Software Foundation, Inc. |
| Contributed by Dimitar Dimitrov <dimitar@dinux.eu> |
| Based on elf32-nios2.c |
| |
| This file is part of BFD, the Binary File Descriptor library. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| /* This file handles TI PRU ELF targets. */ |
| |
| #include "sysdep.h" |
| #include "bfd.h" |
| #include "libbfd.h" |
| #include "bfdlink.h" |
| #include "genlink.h" |
| #include "elf-bfd.h" |
| #include "elf/pru.h" |
| #include "opcode/pru.h" |
| #include "libiberty.h" |
| |
| /* All users of this file have bfd_octets_per_byte (abfd, sec) == 1. */ |
| #define OCTETS_PER_BYTE(ABFD, SEC) 1 |
| |
| #define SWAP_VALS(A,B) \ |
| do { \ |
| (A) ^= (B); \ |
| (B) ^= (A); \ |
| (A) ^= (B); \ |
| } while (0) |
| |
| /* Enable debugging printout at stdout with this variable. */ |
| static bool debug_relax = false; |
| |
| /* Forward declarations. */ |
| static bfd_reloc_status_type pru_elf32_pmem_relocate |
| (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); |
| static bfd_reloc_status_type pru_elf32_s10_pcrel_relocate |
| (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); |
| static bfd_reloc_status_type pru_elf32_u8_pcrel_relocate |
| (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); |
| static bfd_reloc_status_type pru_elf32_ldi32_relocate |
| (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); |
| static bfd_reloc_status_type bfd_elf_pru_diff_relocate |
| (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); |
| |
| /* Target vector. */ |
| extern const bfd_target pru_elf32_vec; |
| |
| /* The relocation table used for SHT_REL sections. */ |
| static reloc_howto_type elf_pru_howto_table_rel[] = { |
| /* No relocation. */ |
| HOWTO (R_PRU_NONE, /* type */ |
| 0, /* rightshift */ |
| 0, /* size */ |
| 0, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont,/* complain_on_overflow */ |
| bfd_elf_generic_reloc, /* special_function */ |
| "R_PRU_NONE", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_PRU_16_PMEM, |
| 2, |
| 2, /* short */ |
| 32, |
| false, |
| 0, |
| complain_overflow_dont, |
| bfd_elf_generic_reloc, |
| "R_PRU_16_PMEM", |
| false, |
| 0, /* src_mask */ |
| 0xffff, |
| false), |
| |
| HOWTO (R_PRU_U16_PMEMIMM, |
| 2, |
| 4, |
| 32, |
| false, |
| 8, |
| complain_overflow_unsigned, |
| pru_elf32_pmem_relocate, |
| "R_PRU_U16_PMEMIMM", |
| false, |
| 0, /* src_mask */ |
| 0x00ffff00, |
| false), |
| |
| HOWTO (R_PRU_BFD_RELOC_16, |
| 0, |
| 2, /* short */ |
| 16, |
| false, |
| 0, |
| complain_overflow_bitfield, |
| bfd_elf_generic_reloc, |
| "R_PRU_BFD_RELOC16", |
| false, |
| 0, /* src_mask */ |
| 0x0000ffff, |
| false), |
| |
| /* 16-bit unsigned immediate relocation. */ |
| HOWTO (R_PRU_U16, /* type */ |
| 0, /* rightshift */ |
| 4, /* size */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 8, /* bitpos */ |
| complain_overflow_unsigned, /* complain on overflow */ |
| bfd_elf_generic_reloc, /* special function */ |
| "R_PRU_U16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0x00ffff00, /* dest_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_PRU_32_PMEM, |
| 2, |
| 4, /* long */ |
| 32, |
| false, |
| 0, |
| complain_overflow_dont, |
| pru_elf32_pmem_relocate, |
| "R_PRU_32_PMEM", |
| false, |
| 0, /* src_mask */ |
| 0xffffffff, |
| false), |
| |
| HOWTO (R_PRU_BFD_RELOC_32, |
| 0, |
| 4, /* long */ |
| 32, |
| false, |
| 0, |
| complain_overflow_dont, |
| bfd_elf_generic_reloc, |
| "R_PRU_BFD_RELOC32", |
| false, |
| 0, /* src_mask */ |
| 0xffffffff, |
| false), |
| |
| HOWTO (R_PRU_S10_PCREL, |
| 2, |
| 4, |
| 10, |
| true, |
| 0, |
| complain_overflow_bitfield, |
| pru_elf32_s10_pcrel_relocate, |
| "R_PRU_S10_PCREL", |
| false, |
| 0, /* src_mask */ |
| 0x060000ff, |
| true), |
| |
| HOWTO (R_PRU_U8_PCREL, |
| 2, |
| 4, |
| 8, |
| true, |
| 0, |
| complain_overflow_unsigned, |
| pru_elf32_u8_pcrel_relocate, |
| "R_PRU_U8_PCREL", |
| false, |
| 0, /* src_mask */ |
| 0x000000ff, |
| true), |
| |
| HOWTO (R_PRU_LDI32, |
| 0, /* rightshift */ |
| 8, /* size */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_unsigned, /* complain on overflow */ |
| pru_elf32_ldi32_relocate, /* special function */ |
| "R_PRU_LDI32", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dest_mask */ |
| false), /* pcrel_offset */ |
| |
| /* GNU-specific relocations. */ |
| HOWTO (R_PRU_GNU_BFD_RELOC_8, |
| 0, |
| 1, /* byte */ |
| 8, |
| false, |
| 0, |
| complain_overflow_bitfield, |
| bfd_elf_generic_reloc, |
| "R_PRU_BFD_RELOC8", |
| false, |
| 0, /* src_mask */ |
| 0x000000ff, |
| false), |
| |
| HOWTO (R_PRU_GNU_DIFF8, /* type */ |
| 0, /* rightshift */ |
| 1, /* size */ |
| 8, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_pru_diff_relocate, /* special_function */ |
| "R_PRU_DIFF8", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_PRU_GNU_DIFF16, /* type */ |
| 0, /* rightshift */ |
| 2, /* size */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_pru_diff_relocate,/* special_function */ |
| "R_PRU_DIFF16", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_PRU_GNU_DIFF32, /* type */ |
| 0, /* rightshift */ |
| 4, /* size */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_pru_diff_relocate,/* special_function */ |
| "R_PRU_DIFF32", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_PRU_GNU_DIFF16_PMEM, /* type */ |
| 0, /* rightshift */ |
| 2, /* size */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_pru_diff_relocate,/* special_function */ |
| "R_PRU_DIFF16_PMEM", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_PRU_GNU_DIFF32_PMEM, /* type */ |
| 0, /* rightshift */ |
| 4, /* size */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bfd_elf_pru_diff_relocate,/* special_function */ |
| "R_PRU_DIFF32_PMEM", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* Add other relocations here. */ |
| }; |
| |
| static unsigned char elf_code_to_howto_index[R_PRU_ILLEGAL + 1]; |
| |
| /* Return the howto for relocation RTYPE. */ |
| |
| static reloc_howto_type * |
| lookup_howto (unsigned int rtype) |
| { |
| static bool initialized = false; |
| int i; |
| int howto_tbl_size = (int) (sizeof (elf_pru_howto_table_rel) |
| / sizeof (elf_pru_howto_table_rel[0])); |
| |
| if (! initialized) |
| { |
| initialized = true; |
| memset (elf_code_to_howto_index, 0xff, |
| sizeof (elf_code_to_howto_index)); |
| for (i = 0; i < howto_tbl_size; i++) |
| elf_code_to_howto_index[elf_pru_howto_table_rel[i].type] = i; |
| } |
| |
| if (rtype > R_PRU_ILLEGAL) |
| return NULL; |
| i = elf_code_to_howto_index[rtype]; |
| if (i >= howto_tbl_size) |
| return NULL; |
| return elf_pru_howto_table_rel + i; |
| } |
| |
| /* Map for converting BFD reloc types to PRU reloc types. */ |
| |
| struct elf_reloc_map |
| { |
| bfd_reloc_code_real_type bfd_val; |
| enum elf_pru_reloc_type elf_val; |
| }; |
| |
| static const struct elf_reloc_map pru_reloc_map[] = |
| { |
| {BFD_RELOC_NONE, R_PRU_NONE}, |
| {BFD_RELOC_PRU_16_PMEM, R_PRU_16_PMEM}, |
| {BFD_RELOC_PRU_U16_PMEMIMM, R_PRU_U16_PMEMIMM}, |
| {BFD_RELOC_16, R_PRU_BFD_RELOC_16}, |
| {BFD_RELOC_PRU_U16, R_PRU_U16}, |
| {BFD_RELOC_PRU_32_PMEM, R_PRU_32_PMEM}, |
| {BFD_RELOC_32, R_PRU_BFD_RELOC_32}, |
| {BFD_RELOC_PRU_S10_PCREL, R_PRU_S10_PCREL}, |
| {BFD_RELOC_PRU_U8_PCREL, R_PRU_U8_PCREL}, |
| {BFD_RELOC_PRU_LDI32, R_PRU_LDI32}, |
| |
| {BFD_RELOC_8, R_PRU_GNU_BFD_RELOC_8}, |
| {BFD_RELOC_PRU_GNU_DIFF8, R_PRU_GNU_DIFF8}, |
| {BFD_RELOC_PRU_GNU_DIFF16, R_PRU_GNU_DIFF16}, |
| {BFD_RELOC_PRU_GNU_DIFF32, R_PRU_GNU_DIFF32}, |
| {BFD_RELOC_PRU_GNU_DIFF16_PMEM, R_PRU_GNU_DIFF16_PMEM}, |
| {BFD_RELOC_PRU_GNU_DIFF32_PMEM, R_PRU_GNU_DIFF32_PMEM}, |
| }; |
| |
| |
| /* Assorted hash table functions. */ |
| |
| /* Create an entry in a PRU ELF linker hash table. */ |
| |
| static struct bfd_hash_entry * |
| link_hash_newfunc (struct bfd_hash_entry *entry, |
| struct bfd_hash_table *table, const char *string) |
| { |
| /* Allocate the structure if it has not already been allocated by a |
| subclass. */ |
| if (entry == NULL) |
| { |
| entry = bfd_hash_allocate (table, |
| sizeof (struct elf_link_hash_entry)); |
| if (entry == NULL) |
| return entry; |
| } |
| |
| /* Call the allocation method of the superclass. */ |
| entry = _bfd_elf_link_hash_newfunc (entry, table, string); |
| |
| return entry; |
| } |
| |
| /* Implement bfd_elf32_bfd_reloc_type_lookup: |
| Given a BFD reloc type, return a howto structure. */ |
| |
| static reloc_howto_type * |
| pru_elf32_bfd_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED, |
| bfd_reloc_code_real_type code) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE (pru_reloc_map); ++i) |
| if (pru_reloc_map[i].bfd_val == code) |
| return lookup_howto ((unsigned int) pru_reloc_map[i].elf_val); |
| return NULL; |
| } |
| |
| /* Implement bfd_elf32_bfd_reloc_name_lookup: |
| Given a reloc name, return a howto structure. */ |
| |
| static reloc_howto_type * |
| pru_elf32_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, |
| const char *r_name) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE (elf_pru_howto_table_rel); i++) |
| if (elf_pru_howto_table_rel[i].name |
| && strcasecmp (elf_pru_howto_table_rel[i].name, r_name) == 0) |
| return &elf_pru_howto_table_rel[i]; |
| |
| return NULL; |
| } |
| |
| /* Implement elf_info_to_howto: |
| Given a ELF32 relocation, fill in a arelent structure. */ |
| |
| static bool |
| pru_elf32_info_to_howto (bfd *abfd, arelent *cache_ptr, |
| Elf_Internal_Rela *dst) |
| { |
| unsigned int r_type; |
| |
| r_type = ELF32_R_TYPE (dst->r_info); |
| if (r_type >= R_PRU_ILLEGAL) |
| { |
| /* xgettext:c-format */ |
| _bfd_error_handler (_("%pB: unsupported relocation type %#x"), abfd, r_type); |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| |
| cache_ptr->howto = lookup_howto (r_type); |
| return cache_ptr->howto != NULL; |
| } |
| |
| /* Do the relocations that require special handling. */ |
| /* Produce a word address for program memory. Linker scripts will put .text |
| at a high offset in order to differentiate it from .data. So here we also |
| mask the high bits of PMEM address. |
| |
| But why 1MB when internal Program Memory much smaller? We want to catch |
| unintended overflows. |
| |
| Why not use (1<<31) as an offset and a mask? Sitara DDRAM usually resides |
| there, and users might want to put some shared carveout memory region in |
| their linker scripts. So 0x80000000 might be a valid .data address. |
| |
| Note that we still keep and pass down the original howto. This way we |
| can reuse this function for several different relocations. */ |
| static bfd_reloc_status_type |
| pru_elf32_do_pmem_relocate (bfd *abfd, reloc_howto_type *howto, |
| asection *input_section, |
| bfd_byte *data, bfd_vma offset, |
| bfd_vma symbol_value, bfd_vma addend) |
| { |
| symbol_value = symbol_value + addend; |
| addend = 0; |
| symbol_value &= 0x3fffff; |
| return _bfd_final_link_relocate (howto, abfd, input_section, |
| data, offset, symbol_value, addend); |
| } |
| |
| /* Direct copy of _bfd_final_link_relocate, but with special |
| "fill-in". This copy-paste mumbo jumbo is only needed because BFD |
| cannot deal correctly with non-contiguous bit fields. */ |
| static bfd_reloc_status_type |
| pru_elf32_do_s10_pcrel_relocate (bfd *input_bfd, reloc_howto_type *howto, |
| asection *input_section, |
| bfd_byte *contents, bfd_vma address, |
| bfd_vma relocation, bfd_vma addend) |
| { |
| bfd_byte *location; |
| bfd_vma x = 0; |
| bfd_vma qboff; |
| bfd_reloc_status_type flag = bfd_reloc_ok; |
| |
| /* Sanity check the address. */ |
| if (address > bfd_get_section_limit (input_bfd, input_section)) |
| return bfd_reloc_outofrange; |
| |
| BFD_ASSERT (howto->pc_relative); |
| BFD_ASSERT (howto->pcrel_offset); |
| |
| relocation = relocation + addend - (input_section->output_section->vma |
| + input_section->output_offset) - address; |
| |
| location = contents + address; |
| |
| /* Get the value we are going to relocate. */ |
| BFD_ASSERT (bfd_get_reloc_size (howto) == 4); |
| x = bfd_get_32 (input_bfd, location); |
| |
| qboff = GET_BROFF_SIGNED (x) << howto->rightshift; |
| relocation += qboff; |
| |
| BFD_ASSERT (howto->complain_on_overflow == complain_overflow_bitfield); |
| |
| if (relocation > 2047 && relocation < (bfd_vma)-2048l) |
| flag = bfd_reloc_overflow; |
| |
| /* Check that target address is word-aligned. */ |
| if (relocation & ((1 << howto->rightshift) - 1)) |
| flag = bfd_reloc_outofrange; |
| |
| relocation >>= (bfd_vma) howto->rightshift; |
| |
| /* Fill-in the RELOCATION to the right bits of X. */ |
| SET_BROFF_URAW (x, relocation); |
| |
| bfd_put_32 (input_bfd, x, location); |
| |
| return flag; |
| } |
| |
| static bfd_reloc_status_type |
| pru_elf32_do_u8_pcrel_relocate (bfd *abfd, reloc_howto_type *howto, |
| asection *input_section, |
| bfd_byte *data, bfd_vma offset, |
| bfd_vma symbol_value, bfd_vma addend) |
| { |
| bfd_vma relocation; |
| |
| BFD_ASSERT (howto->pc_relative); |
| BFD_ASSERT (howto->pcrel_offset); |
| |
| relocation = symbol_value + addend - (input_section->output_section->vma |
| + input_section->output_offset) - offset; |
| relocation >>= howto->rightshift; |
| |
| /* 0 and 1 are invalid target labels for LOOP. We cannot |
| encode this info in HOWTO, so catch such cases here. */ |
| if (relocation < 2) |
| return bfd_reloc_outofrange; |
| |
| return _bfd_final_link_relocate (howto, abfd, input_section, |
| data, offset, symbol_value, addend); |
| } |
| |
| /* Idea and code taken from elf32-d30v. */ |
| static bfd_reloc_status_type |
| pru_elf32_do_ldi32_relocate (bfd *abfd, reloc_howto_type *howto, |
| asection *input_section, |
| bfd_byte *data, bfd_vma offset, |
| bfd_vma symbol_value, bfd_vma addend) |
| { |
| bfd_vma relocation; |
| bfd_size_type octets = offset * OCTETS_PER_BYTE (abfd, input_section); |
| bfd_byte *location; |
| unsigned long in1, in2; |
| |
| /* A hacked-up version of _bfd_final_link_relocate() follows. */ |
| |
| /* Sanity check the address. */ |
| if (octets + bfd_get_reloc_size (howto) |
| > bfd_get_section_limit_octets (abfd, input_section)) |
| return bfd_reloc_outofrange; |
| |
| /* This function assumes that we are dealing with a basic relocation |
| against a symbol. We want to compute the value of the symbol to |
| relocate to. This is just VALUE, the value of the symbol, plus |
| ADDEND, any addend associated with the reloc. */ |
| relocation = symbol_value + addend; |
| |
| BFD_ASSERT (!howto->pc_relative); |
| |
| /* A hacked-up version of _bfd_relocate_contents() follows. */ |
| location = data + octets; |
| |
| BFD_ASSERT (!howto->pc_relative); |
| |
| in1 = bfd_get_32 (abfd, location); |
| in2 = bfd_get_32 (abfd, location + 4); |
| |
| SET_INSN_FIELD (IMM16, in1, relocation >> 16); |
| SET_INSN_FIELD (IMM16, in2, relocation & 0xffff); |
| |
| bfd_put_32 (abfd, in1, location); |
| bfd_put_32 (abfd, in2, location + 4); |
| |
| /* Old GAS and LD versions have a bug, where the two |
| LDI instructions are swapped. Detect such object |
| files and bail. */ |
| if (GET_INSN_FIELD (RDSEL, in1) != RSEL_31_16) |
| { |
| /* xgettext:c-format */ |
| _bfd_error_handler (_("error: %pB: old incompatible object file detected"), |
| abfd); |
| return bfd_reloc_notsupported; |
| } |
| |
| return bfd_reloc_ok; |
| } |
| |
| /* HOWTO handlers for relocations that require special handling. */ |
| |
| static bfd_reloc_status_type |
| pru_elf32_pmem_relocate (bfd *abfd, arelent *reloc_entry, |
| asymbol *symbol, void *data, |
| asection *input_section, bfd *output_bfd, |
| char **error_message) |
| { |
| /* If this is a relocatable link (output_bfd test tells us), just |
| call the generic function. Any adjustment will be done at final |
| link time. */ |
| if (output_bfd != NULL) |
| return bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, error_message); |
| |
| BFD_ASSERT (0); |
| return pru_elf32_do_pmem_relocate (abfd, reloc_entry->howto, |
| input_section, |
| data, reloc_entry->address, |
| (symbol->value |
| + symbol->section->output_section->vma |
| + symbol->section->output_offset), |
| reloc_entry->addend); |
| } |
| |
| static bfd_reloc_status_type |
| pru_elf32_s10_pcrel_relocate (bfd *abfd, arelent *reloc_entry, |
| asymbol *symbol, void *data, |
| asection *input_section, bfd *output_bfd, |
| char **error_message) |
| { |
| /* If this is a relocatable link (output_bfd test tells us), just |
| call the generic function. Any adjustment will be done at final |
| link time. */ |
| if (output_bfd != NULL) |
| return bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, error_message); |
| |
| return pru_elf32_do_s10_pcrel_relocate (abfd, reloc_entry->howto, |
| input_section, data, |
| reloc_entry->address, |
| (symbol->value |
| + symbol->section->output_section->vma |
| + symbol->section->output_offset), |
| reloc_entry->addend); |
| } |
| |
| static bfd_reloc_status_type |
| pru_elf32_u8_pcrel_relocate (bfd *abfd, arelent *reloc_entry, asymbol *symbol, |
| void *data, asection *input_section, |
| bfd *output_bfd, |
| char **error_message) |
| { |
| /* If this is a relocatable link (output_bfd test tells us), just |
| call the generic function. Any adjustment will be done at final |
| link time. */ |
| if (output_bfd != NULL) |
| return bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, error_message); |
| |
| return pru_elf32_do_u8_pcrel_relocate (abfd, reloc_entry->howto, |
| input_section, |
| data, reloc_entry->address, |
| (symbol->value |
| + symbol->section->output_section->vma |
| + symbol->section->output_offset), |
| reloc_entry->addend); |
| } |
| |
| static bfd_reloc_status_type |
| pru_elf32_ldi32_relocate (bfd *abfd, arelent *reloc_entry, asymbol *symbol, |
| void *data, asection *input_section, |
| bfd *output_bfd, |
| char **error_message) |
| { |
| /* If this is a relocatable link (output_bfd test tells us), just |
| call the generic function. Any adjustment will be done at final |
| link time. */ |
| if (output_bfd != NULL) |
| return bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, error_message); |
| |
| return pru_elf32_do_ldi32_relocate (abfd, reloc_entry->howto, |
| input_section, |
| data, reloc_entry->address, |
| (symbol->value |
| + symbol->section->output_section->vma |
| + symbol->section->output_offset), |
| reloc_entry->addend); |
| } |
| |
| |
| /* Implement elf_backend_relocate_section. */ |
| static int |
| pru_elf32_relocate_section (bfd *output_bfd, |
| struct bfd_link_info *info, |
| bfd *input_bfd, |
| asection *input_section, |
| bfd_byte *contents, |
| Elf_Internal_Rela *relocs, |
| Elf_Internal_Sym *local_syms, |
| asection **local_sections) |
| { |
| struct bfd_elf_section_data * esd = elf_section_data (input_section); |
| Elf_Internal_Shdr *symtab_hdr; |
| struct elf_link_hash_entry **sym_hashes; |
| Elf_Internal_Rela *rel; |
| Elf_Internal_Rela *relend; |
| bool is_rel_reloc; |
| |
| symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; |
| sym_hashes = elf_sym_hashes (input_bfd); |
| relend = relocs + input_section->reloc_count; |
| |
| /* See if we have a REL type relocation. */ |
| is_rel_reloc = (esd->rel.hdr != NULL); |
| /* Sanity check - only one type of relocation per section. |
| FIXME: Theoretically it is possible to have both types, |
| but if that happens how can we distinguish between the two ? */ |
| BFD_ASSERT (! is_rel_reloc || ! esd->rela.hdr); |
| |
| for (rel = relocs; rel < relend; rel++) |
| { |
| reloc_howto_type *howto; |
| unsigned long r_symndx; |
| Elf_Internal_Sym *sym; |
| asection *sec; |
| struct elf_link_hash_entry *h; |
| bfd_vma relocation; |
| bfd_reloc_status_type r = bfd_reloc_ok; |
| const char *name = NULL; |
| const char* msg = (const char*) NULL; |
| bool unresolved_reloc; |
| bfd_vma addend; |
| |
| /* If we are using a REL relocation then the addend should be empty. */ |
| BFD_ASSERT (! is_rel_reloc || rel->r_addend == 0); |
| |
| r_symndx = ELF32_R_SYM (rel->r_info); |
| |
| howto = lookup_howto ((unsigned) ELF32_R_TYPE (rel->r_info)); |
| h = NULL; |
| sym = NULL; |
| sec = NULL; |
| |
| if (r_symndx < symtab_hdr->sh_info) |
| { |
| sym = local_syms + r_symndx; |
| sec = local_sections[r_symndx]; |
| relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel); |
| } |
| else |
| { |
| bool warned, ignored; |
| |
| RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel, |
| r_symndx, symtab_hdr, sym_hashes, |
| h, sec, relocation, |
| unresolved_reloc, warned, ignored); |
| } |
| |
| if (sec && discarded_section (sec)) |
| RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section, |
| rel, 1, relend, howto, 0, contents); |
| |
| /* Nothing more to do unless this is a final link. */ |
| if (bfd_link_relocatable (info)) |
| continue; |
| |
| if (howto) |
| { |
| switch (howto->type) |
| { |
| case R_PRU_NONE: |
| /* We don't need to find a value for this symbol. It's just a |
| marker. */ |
| r = bfd_reloc_ok; |
| break; |
| |
| case R_PRU_U16: |
| if (is_rel_reloc) |
| { |
| unsigned long insn; |
| insn = bfd_get_32 (input_bfd, contents + rel->r_offset); |
| addend = GET_INSN_FIELD (IMM16, insn); |
| } |
| else |
| addend = rel->r_addend; |
| r = _bfd_final_link_relocate (howto, input_bfd, |
| input_section, contents, |
| rel->r_offset, relocation, |
| addend); |
| break; |
| |
| case R_PRU_U16_PMEMIMM: |
| case R_PRU_32_PMEM: |
| case R_PRU_16_PMEM: |
| if (is_rel_reloc && howto->type == R_PRU_U16_PMEMIMM) |
| { |
| unsigned long insn; |
| insn = bfd_get_32 (input_bfd, contents + rel->r_offset); |
| addend = GET_INSN_FIELD (IMM16, insn) << 2; |
| } |
| else if (is_rel_reloc && howto->type == R_PRU_32_PMEM) |
| { |
| addend = bfd_get_32 (input_bfd, contents + rel->r_offset); |
| addend <<= 2; |
| } |
| else if (is_rel_reloc && howto->type == R_PRU_16_PMEM) |
| { |
| addend = bfd_get_16 (input_bfd, contents + rel->r_offset); |
| addend <<= 2; |
| } |
| else |
| { |
| BFD_ASSERT (!is_rel_reloc); |
| addend = rel->r_addend; |
| } |
| r = pru_elf32_do_pmem_relocate (input_bfd, howto, |
| input_section, |
| contents, rel->r_offset, |
| relocation, addend); |
| break; |
| case R_PRU_S10_PCREL: |
| BFD_ASSERT (! is_rel_reloc); |
| r = pru_elf32_do_s10_pcrel_relocate (input_bfd, howto, |
| input_section, |
| contents, |
| rel->r_offset, |
| relocation, |
| rel->r_addend); |
| break; |
| case R_PRU_U8_PCREL: |
| BFD_ASSERT (! is_rel_reloc); |
| r = pru_elf32_do_u8_pcrel_relocate (input_bfd, howto, |
| input_section, |
| contents, |
| rel->r_offset, |
| relocation, |
| rel->r_addend); |
| break; |
| case R_PRU_LDI32: |
| if (is_rel_reloc) |
| { |
| unsigned long in1, in2; |
| in1 = bfd_get_32 (input_bfd, contents + rel->r_offset); |
| in2 = bfd_get_32 (input_bfd, contents + rel->r_offset + 4); |
| addend = (GET_INSN_FIELD (IMM16, in1) << 16) |
| | GET_INSN_FIELD (IMM16, in2); |
| } |
| else |
| { |
| addend = rel->r_addend; |
| } |
| r = pru_elf32_do_ldi32_relocate (input_bfd, howto, |
| input_section, |
| contents, |
| rel->r_offset, |
| relocation, |
| addend); |
| break; |
| case R_PRU_GNU_DIFF8: |
| case R_PRU_GNU_DIFF16: |
| case R_PRU_GNU_DIFF32: |
| case R_PRU_GNU_DIFF16_PMEM: |
| case R_PRU_GNU_DIFF32_PMEM: |
| /* GNU extensions support only rela. */ |
| BFD_ASSERT (! is_rel_reloc); |
| /* Nothing to do here, as contents already contain the |
| diff value. */ |
| r = bfd_reloc_ok; |
| break; |
| |
| case R_PRU_BFD_RELOC_16: |
| if (is_rel_reloc) |
| addend = bfd_get_16 (input_bfd, contents + rel->r_offset); |
| else |
| addend = rel->r_addend; |
| r = _bfd_final_link_relocate (howto, input_bfd, |
| input_section, contents, |
| rel->r_offset, relocation, |
| addend); |
| break; |
| |
| case R_PRU_BFD_RELOC_32: |
| if (is_rel_reloc) |
| addend = bfd_get_32 (input_bfd, contents + rel->r_offset); |
| else |
| addend = rel->r_addend; |
| r = _bfd_final_link_relocate (howto, input_bfd, |
| input_section, contents, |
| rel->r_offset, relocation, |
| addend); |
| break; |
| |
| case R_PRU_GNU_BFD_RELOC_8: |
| BFD_ASSERT (! is_rel_reloc); |
| r = _bfd_final_link_relocate (howto, input_bfd, |
| input_section, contents, |
| rel->r_offset, relocation, |
| rel->r_addend); |
| break; |
| |
| default: |
| BFD_ASSERT (0); |
| break; |
| } |
| } |
| else |
| r = bfd_reloc_notsupported; |
| |
| if (r != bfd_reloc_ok) |
| { |
| if (h != NULL) |
| name = h->root.root.string; |
| else |
| { |
| name = bfd_elf_string_from_elf_section (input_bfd, |
| symtab_hdr->sh_link, |
| sym->st_name); |
| if (name == NULL || *name == '\0') |
| name = bfd_section_name (sec); |
| } |
| |
| switch (r) |
| { |
| case bfd_reloc_overflow: |
| (*info->callbacks->reloc_overflow) (info, NULL, name, |
| howto->name, (bfd_vma) 0, |
| input_bfd, input_section, |
| rel->r_offset); |
| break; |
| |
| case bfd_reloc_undefined: |
| (*info->callbacks->undefined_symbol) (info, name, input_bfd, |
| input_section, |
| rel->r_offset, true); |
| break; |
| |
| case bfd_reloc_outofrange: |
| if (msg == NULL) |
| msg = _("relocation out of range"); |
| break; |
| |
| case bfd_reloc_notsupported: |
| if (msg == NULL) |
| msg = _("unsupported relocation"); |
| break; |
| |
| case bfd_reloc_dangerous: |
| if (msg == NULL) |
| msg = _("dangerous relocation"); |
| break; |
| |
| default: |
| if (msg == NULL) |
| msg = _("unknown error"); |
| break; |
| } |
| |
| if (msg) |
| { |
| (*info->callbacks->warning) (info, msg, name, input_bfd, |
| input_section, rel->r_offset); |
| return false; |
| } |
| } |
| } |
| return true; |
| } |
| |
| |
| /* Perform a diff relocation. Nothing to do, as the difference value is |
| already written into the section's contents. */ |
| |
| static bfd_reloc_status_type |
| bfd_elf_pru_diff_relocate (bfd *abfd ATTRIBUTE_UNUSED, |
| arelent *reloc_entry ATTRIBUTE_UNUSED, |
| asymbol *symbol ATTRIBUTE_UNUSED, |
| void *data ATTRIBUTE_UNUSED, |
| asection *input_section ATTRIBUTE_UNUSED, |
| bfd *output_bfd ATTRIBUTE_UNUSED, |
| char **error_message ATTRIBUTE_UNUSED) |
| { |
| return bfd_reloc_ok; |
| } |
| |
| |
| /* Returns whether the relocation type passed is a diff reloc. */ |
| |
| static bool |
| elf32_pru_is_diff_reloc (Elf_Internal_Rela *irel) |
| { |
| return (ELF32_R_TYPE (irel->r_info) == R_PRU_GNU_DIFF8 |
| || ELF32_R_TYPE (irel->r_info) == R_PRU_GNU_DIFF16 |
| || ELF32_R_TYPE (irel->r_info) == R_PRU_GNU_DIFF32 |
| || ELF32_R_TYPE (irel->r_info) == R_PRU_GNU_DIFF16_PMEM |
| || ELF32_R_TYPE (irel->r_info) == R_PRU_GNU_DIFF32_PMEM); |
| } |
| |
| /* Reduce the diff value written in the section by count if the shrinked |
| insn address happens to fall between the two symbols for which this |
| diff reloc was emitted. */ |
| |
| static void |
| elf32_pru_adjust_diff_reloc_value (bfd *abfd, |
| struct bfd_section *isec, |
| Elf_Internal_Rela *irel, |
| bfd_vma symval, |
| bfd_vma shrinked_insn_address, |
| int count) |
| { |
| unsigned char *reloc_contents = NULL; |
| unsigned char *isec_contents = elf_section_data (isec)->this_hdr.contents; |
| if (isec_contents == NULL) |
| { |
| if (! bfd_malloc_and_get_section (abfd, isec, &isec_contents)) |
| return; |
| |
| elf_section_data (isec)->this_hdr.contents = isec_contents; |
| } |
| |
| reloc_contents = isec_contents + irel->r_offset; |
| |
| /* Read value written in object file. */ |
| bfd_signed_vma x = 0; |
| switch (ELF32_R_TYPE (irel->r_info)) |
| { |
| case R_PRU_GNU_DIFF8: |
| { |
| x = bfd_get_signed_8 (abfd, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF16: |
| { |
| x = bfd_get_signed_16 (abfd, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF32: |
| { |
| x = bfd_get_signed_32 (abfd, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF16_PMEM: |
| { |
| x = bfd_get_signed_16 (abfd, reloc_contents) * 4; |
| break; |
| } |
| case R_PRU_GNU_DIFF32_PMEM: |
| { |
| x = bfd_get_signed_32 (abfd, reloc_contents) * 4; |
| break; |
| } |
| default: |
| { |
| BFD_FAIL (); |
| } |
| } |
| |
| /* For a diff reloc sym1 - sym2 the diff at assembly time (x) is written |
| into the object file at the reloc offset. sym2's logical value is |
| symval (<start_of_section>) + reloc addend. Compute the start and end |
| addresses and check if the shrinked insn falls between sym1 and sym2. */ |
| |
| bfd_vma end_address = symval + irel->r_addend; |
| bfd_vma start_address = end_address - x; |
| |
| /* Shrink the absolute DIFF value (get the to labels "closer" |
| together), because we have removed data between labels. */ |
| if (x < 0) |
| { |
| x += count; |
| /* In case the signed x is negative, restore order. */ |
| SWAP_VALS (end_address, start_address); |
| } |
| else |
| { |
| x -= count; |
| } |
| |
| /* Reduce the diff value by count bytes and write it back into section |
| contents. */ |
| |
| if (shrinked_insn_address >= start_address |
| && shrinked_insn_address <= end_address) |
| { |
| switch (ELF32_R_TYPE (irel->r_info)) |
| { |
| case R_PRU_GNU_DIFF8: |
| { |
| bfd_put_signed_8 (abfd, x & 0xFF, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF16: |
| { |
| bfd_put_signed_16 (abfd, x & 0xFFFF, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF32: |
| { |
| bfd_put_signed_32 (abfd, x & 0xFFFFFFFF, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF16_PMEM: |
| { |
| bfd_put_signed_16 (abfd, (x / 4) & 0xFFFF, reloc_contents); |
| break; |
| } |
| case R_PRU_GNU_DIFF32_PMEM: |
| { |
| bfd_put_signed_32 (abfd, (x / 4) & 0xFFFFFFFF, reloc_contents); |
| break; |
| } |
| default: |
| { |
| BFD_FAIL (); |
| } |
| } |
| |
| } |
| } |
| |
| /* Delete some bytes from a section while changing the size of an instruction. |
| The parameter "addr" denotes the section-relative offset pointing just |
| behind the shrinked instruction. "addr+count" point at the first |
| byte just behind the original unshrinked instruction. |
| |
| Idea copied from the AVR port. */ |
| |
| static bool |
| pru_elf_relax_delete_bytes (bfd *abfd, |
| asection *sec, |
| bfd_vma addr, |
| int count) |
| { |
| Elf_Internal_Shdr *symtab_hdr; |
| unsigned int sec_shndx; |
| bfd_byte *contents; |
| Elf_Internal_Rela *irel, *irelend; |
| Elf_Internal_Sym *isym; |
| Elf_Internal_Sym *isymbuf = NULL; |
| bfd_vma toaddr; |
| struct elf_link_hash_entry **sym_hashes; |
| struct elf_link_hash_entry **end_hashes; |
| unsigned int symcount; |
| |
| symtab_hdr = &elf_tdata (abfd)->symtab_hdr; |
| sec_shndx = _bfd_elf_section_from_bfd_section (abfd, sec); |
| contents = elf_section_data (sec)->this_hdr.contents; |
| |
| toaddr = sec->size; |
| |
| irel = elf_section_data (sec)->relocs; |
| irelend = irel + sec->reloc_count; |
| |
| /* Actually delete the bytes. */ |
| if (toaddr - addr - count > 0) |
| memmove (contents + addr, contents + addr + count, |
| (size_t) (toaddr - addr - count)); |
| sec->size -= count; |
| |
| /* Adjust all the reloc addresses. */ |
| for (irel = elf_section_data (sec)->relocs; irel < irelend; irel++) |
| { |
| bfd_vma old_reloc_address; |
| |
| old_reloc_address = (sec->output_section->vma |
| + sec->output_offset + irel->r_offset); |
| |
| /* Get the new reloc address. */ |
| if ((irel->r_offset > addr |
| && irel->r_offset < toaddr)) |
| { |
| if (debug_relax) |
| printf ("Relocation at address 0x%x needs to be moved.\n" |
| "Old section offset: 0x%x, New section offset: 0x%x \n", |
| (unsigned int) old_reloc_address, |
| (unsigned int) irel->r_offset, |
| (unsigned int) ((irel->r_offset) - count)); |
| |
| irel->r_offset -= count; |
| } |
| |
| } |
| |
| /* The reloc's own addresses are now ok. However, we need to readjust |
| the reloc's addend, i.e. the reloc's value if two conditions are met: |
| 1.) the reloc is relative to a symbol in this section that |
| is located in front of the shrinked instruction |
| 2.) symbol plus addend end up behind the shrinked instruction. |
| |
| The most common case where this happens are relocs relative to |
| the section-start symbol. |
| |
| This step needs to be done for all of the sections of the bfd. */ |
| |
| { |
| struct bfd_section *isec; |
| |
| for (isec = abfd->sections; isec; isec = isec->next) |
| { |
| bfd_vma symval; |
| bfd_vma shrinked_insn_address; |
| |
| if (isec->reloc_count == 0) |
| continue; |
| |
| shrinked_insn_address = (sec->output_section->vma |
| + sec->output_offset + addr); |
| |
| irel = elf_section_data (isec)->relocs; |
| /* PR 12161: Read in the relocs for this section if necessary. */ |
| if (irel == NULL) |
| irel = _bfd_elf_link_read_relocs (abfd, isec, NULL, NULL, true); |
| |
| for (irelend = irel + isec->reloc_count; |
| irel < irelend; |
| irel++) |
| { |
| /* Read this BFD's local symbols if we haven't done |
| so already. */ |
| if (isymbuf == NULL && symtab_hdr->sh_info != 0) |
| { |
| isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents; |
| if (isymbuf == NULL) |
| isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr, |
| symtab_hdr->sh_info, 0, |
| NULL, NULL, NULL); |
| if (isymbuf == NULL) |
| return false; |
| } |
| |
| /* Get the value of the symbol referred to by the reloc. */ |
| if (ELF32_R_SYM (irel->r_info) < symtab_hdr->sh_info) |
| { |
| /* A local symbol. */ |
| asection *sym_sec; |
| |
| isym = isymbuf + ELF32_R_SYM (irel->r_info); |
| sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx); |
| symval = isym->st_value; |
| /* If the reloc is absolute, it will not have |
| a symbol or section associated with it. */ |
| if (sym_sec == sec) |
| { |
| symval += sym_sec->output_section->vma |
| + sym_sec->output_offset; |
| |
| if (debug_relax) |
| printf ("Checking if the relocation's " |
| "addend needs corrections.\n" |
| "Address of anchor symbol: 0x%x \n" |
| "Address of relocation target: 0x%x \n" |
| "Address of relaxed insn: 0x%x \n", |
| (unsigned int) symval, |
| (unsigned int) (symval + irel->r_addend), |
| (unsigned int) shrinked_insn_address); |
| |
| /* Shrink the special DIFF relocations. */ |
| if (elf32_pru_is_diff_reloc (irel)) |
| { |
| elf32_pru_adjust_diff_reloc_value (abfd, isec, irel, |
| symval, |
| shrinked_insn_address, |
| count); |
| } |
| |
| /* Fix the addend, if it is affected. */ |
| if (symval <= shrinked_insn_address |
| && (symval + irel->r_addend) > shrinked_insn_address) |
| { |
| |
| irel->r_addend -= count; |
| |
| if (debug_relax) |
| printf ("Relocation's addend needed to be fixed \n"); |
| } |
| } |
| /* else...Reference symbol is absolute. |
| No adjustment needed. */ |
| } |
| /* else...Reference symbol is extern. No need for adjusting |
| the addend. */ |
| } |
| } |
| } |
| |
| /* Adjust the local symbols defined in this section. */ |
| isym = (Elf_Internal_Sym *) symtab_hdr->contents; |
| /* Fix PR 9841, there may be no local symbols. */ |
| if (isym != NULL) |
| { |
| Elf_Internal_Sym *isymend; |
| |
| isymend = isym + symtab_hdr->sh_info; |
| for (; isym < isymend; isym++) |
| { |
| if (isym->st_shndx == sec_shndx) |
| { |
| if (isym->st_value > addr |
| && isym->st_value <= toaddr) |
| isym->st_value -= count; |
| |
| if (isym->st_value <= addr |
| && isym->st_value + isym->st_size > addr) |
| { |
| /* If this assert fires then we have a symbol that ends |
| part way through an instruction. Does that make |
| sense? */ |
| BFD_ASSERT (isym->st_value + isym->st_size >= addr + count); |
| isym->st_size -= count; |
| } |
| } |
| } |
| } |
| |
| /* Now adjust the global symbols defined in this section. */ |
| symcount = (symtab_hdr->sh_size / sizeof (Elf32_External_Sym) |
| - symtab_hdr->sh_info); |
| sym_hashes = elf_sym_hashes (abfd); |
| end_hashes = sym_hashes + symcount; |
| for (; sym_hashes < end_hashes; sym_hashes++) |
| { |
| struct elf_link_hash_entry *sym_hash = *sym_hashes; |
| if ((sym_hash->root.type == bfd_link_hash_defined |
| || sym_hash->root.type == bfd_link_hash_defweak) |
| && sym_hash->root.u.def.section == sec) |
| { |
| if (sym_hash->root.u.def.value > addr |
| && sym_hash->root.u.def.value <= toaddr) |
| sym_hash->root.u.def.value -= count; |
| |
| if (sym_hash->root.u.def.value <= addr |
| && (sym_hash->root.u.def.value + sym_hash->size > addr)) |
| { |
| /* If this assert fires then we have a symbol that ends |
| part way through an instruction. Does that make |
| sense? */ |
| BFD_ASSERT (sym_hash->root.u.def.value + sym_hash->size |
| >= addr + count); |
| sym_hash->size -= count; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool |
| pru_elf32_relax_section (bfd *abfd, asection *sec, |
| struct bfd_link_info *link_info, |
| bool *again) |
| { |
| Elf_Internal_Shdr * symtab_hdr; |
| Elf_Internal_Rela * internal_relocs; |
| Elf_Internal_Rela * irel; |
| Elf_Internal_Rela * irelend; |
| bfd_byte * contents = NULL; |
| Elf_Internal_Sym * isymbuf = NULL; |
| |
| /* Assume nothing changes. */ |
| *again = false; |
| |
| /* We don't have to do anything for a relocatable link, if |
| this section does not have relocs, or if this is not a |
| code section. */ |
| if (bfd_link_relocatable (link_info) |
| || sec->reloc_count == 0 |
| || (sec->flags & SEC_RELOC) == 0 |
| || (sec->flags & SEC_HAS_CONTENTS) == 0 |
| || (sec->flags & SEC_CODE) == 0) |
| return true; |
| |
| symtab_hdr = & elf_tdata (abfd)->symtab_hdr; |
| |
| /* Get a copy of the native relocations. */ |
| internal_relocs = _bfd_elf_link_read_relocs (abfd, sec, NULL, NULL, |
| link_info->keep_memory); |
| if (internal_relocs == NULL) |
| goto error_return; |
| |
| /* Walk through them looking for relaxing opportunities. */ |
| irelend = internal_relocs + sec->reloc_count; |
| |
| for (irel = internal_relocs; irel < irelend; irel++) |
| { |
| bfd_vma symval; |
| |
| /* Get the section contents if we haven't done so already. */ |
| if (contents == NULL) |
| { |
| /* Get cached copy if it exists. */ |
| if (elf_section_data (sec)->this_hdr.contents != NULL) |
| contents = elf_section_data (sec)->this_hdr.contents; |
| else if (! bfd_malloc_and_get_section (abfd, sec, &contents)) |
| goto error_return; |
| } |
| |
| /* Read this BFD's local symbols if we haven't done so already. */ |
| if (isymbuf == NULL && symtab_hdr->sh_info != 0) |
| { |
| isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents; |
| if (isymbuf == NULL) |
| isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr, |
| symtab_hdr->sh_info, 0, |
| NULL, NULL, NULL); |
| if (isymbuf == NULL) |
| goto error_return; |
| } |
| |
| /* Get the value of the symbol referred to by the reloc. */ |
| if (ELF32_R_SYM (irel->r_info) < symtab_hdr->sh_info) |
| { |
| /* A local symbol. */ |
| Elf_Internal_Sym *isym; |
| asection *sym_sec; |
| |
| isym = isymbuf + ELF32_R_SYM (irel->r_info); |
| if (isym->st_shndx == SHN_UNDEF) |
| sym_sec = bfd_und_section_ptr; |
| else if (isym->st_shndx == SHN_ABS) |
| sym_sec = bfd_abs_section_ptr; |
| else if (isym->st_shndx == SHN_COMMON) |
| sym_sec = bfd_com_section_ptr; |
| else |
| sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx); |
| symval = (isym->st_value |
| + sym_sec->output_section->vma + sym_sec->output_offset); |
| } |
| else |
| { |
| unsigned long indx; |
| struct elf_link_hash_entry *h; |
| |
| /* An external symbol. */ |
| indx = ELF32_R_SYM (irel->r_info) - symtab_hdr->sh_info; |
| h = elf_sym_hashes (abfd)[indx]; |
| BFD_ASSERT (h != NULL); |
| |
| if (h->root.type != bfd_link_hash_defined |
| && h->root.type != bfd_link_hash_defweak) |
| /* This appears to be a reference to an undefined |
| symbol. Just ignore it--it will be caught by the |
| regular reloc processing. */ |
| continue; |
| |
| symval = (h->root.u.def.value |
| + h->root.u.def.section->output_section->vma |
| + h->root.u.def.section->output_offset); |
| } |
| |
| /* For simplicity of coding, we are going to modify the section |
| contents, the section relocs, and the BFD symbol table. We |
| must tell the rest of the code not to free up this |
| information. It would be possible to instead create a table |
| of changes which have to be made, as is done in coff-mips.c; |
| that would be more work, but would require less memory when |
| the linker is run. */ |
| |
| /* Check if we can remove an LDI instruction from the LDI32 |
| pseudo instruction if the upper 16 operand bits are zero. */ |
| if (ELF32_R_TYPE (irel->r_info) == (int) R_PRU_LDI32) |
| { |
| bfd_vma value = symval + irel->r_addend; |
| |
| if (debug_relax) |
| printf ("R_PRU_LDI32 with value=0x%lx\n", (long) value); |
| |
| if ((long) value >> 16 == 0) |
| { |
| unsigned long insn; |
| |
| /* Note that we've changed the relocs, section contents. */ |
| elf_section_data (sec)->relocs = internal_relocs; |
| elf_section_data (sec)->this_hdr.contents = contents; |
| symtab_hdr->contents = (unsigned char *) isymbuf; |
| |
| /* Make the second instruction load the 16-bit constant |
| into the full 32-bit register. */ |
| insn = bfd_get_32 (abfd, contents + irel->r_offset + 4); |
| |
| /* Old GAS and LD versions have a bug, where the two |
| LDI instructions are swapped. Detect such object |
| files and bail. */ |
| if (GET_INSN_FIELD (RDSEL, insn) != RSEL_15_0) |
| { |
| /* xgettext:c-format */ |
| _bfd_error_handler (_("error: %pB: old incompatible object file detected"), |
| abfd); |
| goto error_return; |
| } |
| |
| SET_INSN_FIELD (RDSEL, insn, RSEL_31_0); |
| bfd_put_32 (abfd, insn, contents + irel->r_offset + 4); |
| |
| /* Delete the first LDI instruction. Note that there should |
| be no relocations or symbols pointing to the second LDI |
| instruction. */ |
| if (!pru_elf_relax_delete_bytes (abfd, sec, irel->r_offset, 4)) |
| goto error_return; |
| |
| /* We're done with deletion of the first instruction. |
| Set a regular LDI relocation for the second instruction |
| we left to load the 16-bit value into the 32-bit |
| register. */ |
| irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info), |
| R_PRU_U16); |
| |
| /* That will change things, so, we should relax again. |
| Note that this is not required, and it may be slow. */ |
| *again = true; |
| } |
| } |
| } |
| |
| if (isymbuf != NULL && symtab_hdr->contents != (unsigned char *) isymbuf) |
| { |
| if (!link_info->keep_memory) |
| free (isymbuf); |
| else |
| { |
| /* Cache the symbols for elf_link_input_bfd. */ |
| symtab_hdr->contents = (unsigned char *) isymbuf; |
| } |
| } |
| |
| if (contents != NULL |
| && elf_section_data (sec)->this_hdr.contents != contents) |
| { |
| if (!link_info->keep_memory) |
| free (contents); |
| else |
| { |
| /* Cache the section contents for elf_link_input_bfd. */ |
| elf_section_data (sec)->this_hdr.contents = contents; |
| } |
| } |
| |
| if (elf_section_data (sec)->relocs != internal_relocs) |
| free (internal_relocs); |
| |
| return true; |
| |
| error_return: |
| if (symtab_hdr->contents != (unsigned char *) isymbuf) |
| free (isymbuf); |
| if (elf_section_data (sec)->this_hdr.contents != contents) |
| free (contents); |
| if (elf_section_data (sec)->relocs != internal_relocs) |
| free (internal_relocs); |
| |
| return false; |
| } |
| |
| /* Free the derived linker hash table. */ |
| static void |
| pru_elf32_link_hash_table_free (bfd *obfd) |
| { |
| _bfd_elf_link_hash_table_free (obfd); |
| } |
| |
| /* Implement bfd_elf32_bfd_link_hash_table_create. */ |
| static struct bfd_link_hash_table * |
| pru_elf32_link_hash_table_create (bfd *abfd) |
| { |
| struct elf_link_hash_table *ret; |
| size_t amt = sizeof (struct elf_link_hash_table); |
| |
| ret = bfd_zmalloc (amt); |
| if (ret == NULL) |
| return NULL; |
| |
| if (!_bfd_elf_link_hash_table_init (ret, abfd, |
| link_hash_newfunc, |
| sizeof (struct |
| elf_link_hash_entry), |
| PRU_ELF_DATA)) |
| { |
| free (ret); |
| return NULL; |
| } |
| |
| ret->root.hash_table_free = pru_elf32_link_hash_table_free; |
| |
| return &ret->root; |
| } |
| |
| #define ELF_ARCH bfd_arch_pru |
| #define ELF_TARGET_ID PRU_ELF_DATA |
| #define ELF_MACHINE_CODE EM_TI_PRU |
| |
| #define ELF_MAXPAGESIZE 1 |
| |
| #define bfd_elf32_bfd_link_hash_table_create \ |
| pru_elf32_link_hash_table_create |
| |
| /* Relocation table lookup macros. */ |
| |
| #define bfd_elf32_bfd_reloc_type_lookup pru_elf32_bfd_reloc_type_lookup |
| #define bfd_elf32_bfd_reloc_name_lookup pru_elf32_bfd_reloc_name_lookup |
| |
| #define elf_info_to_howto pru_elf32_info_to_howto |
| #define elf_info_to_howto_rel NULL |
| |
| /* elf backend functions. */ |
| |
| /* TI folks like to use a mix of REL and RELA relocations. See also |
| the MSP430 and TI C6X backends. */ |
| #define elf_backend_may_use_rel_p 1 |
| #define elf_backend_may_use_rela_p 1 |
| #define elf_backend_default_use_rela_p 1 |
| |
| #define elf_backend_rela_normal 1 |
| |
| #define elf_backend_relocate_section pru_elf32_relocate_section |
| #define bfd_elf32_bfd_relax_section pru_elf32_relax_section |
| #define elf_backend_can_gc_sections 1 |
| |
| #define elf_backend_default_execstack 0 |
| |
| #define TARGET_LITTLE_SYM pru_elf32_vec |
| #define TARGET_LITTLE_NAME "elf32-pru" |
| |
| #include "elf32-target.h" |