| /* BFD back-end for MAXQ COFF binaries. | |
| Copyright 2004, 2007 Free Software Foundation, Inc. | |
| Contributed by Vineet Sharma (vineets@noida.hcltech.com) Inderpreet S. | |
| (inderpreetb@noida.hcltech.com) | |
| HCL Technologies Ltd. | |
| This file is part of BFD, the Binary File Descriptor library. | |
| This program is free software; you can redistribute it and/or modify it | |
| under the terms of the GNU General Public License as published by the Free | |
| Software Foundation; either version 3 of the License, or (at your option) | |
| any later version. | |
| This program is distributed in the hope that it will be useful, but | |
| WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| for more details. | |
| You should have received a copy of the GNU General Public License along | |
| with this program; if not, write to the Free Software Foundation, Inc., | |
| 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ | |
| #include "sysdep.h" | |
| #include "bfd.h" | |
| #include "libbfd.h" | |
| #include "coff/maxq.h" | |
| #include "coff/internal.h" | |
| #include "libcoff.h" | |
| #include "libiberty.h" | |
| #ifndef MAXQ20 | |
| #define MAXQ20 1 | |
| #endif | |
| #define RTYPE2HOWTO(cache_ptr, dst) \ | |
| ((cache_ptr)->howto = \ | |
| ((dst)->r_type < 48 \ | |
| ? howto_table + (((dst)->r_type==47) ? 6: ((dst)->r_type)) \ | |
| : NULL)) | |
| #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2) | |
| /* Code to swap in the reloc offset. */ | |
| #define SWAP_IN_RELOC_OFFSET H_GET_16 | |
| #define SWAP_OUT_RELOC_OFFSET H_PUT_16 | |
| #define SHORT_JUMP BFD_RELOC_16_PCREL_S2 | |
| #define LONG_JUMP BFD_RELOC_14 | |
| #define ABSOLUTE_ADDR_FOR_DATA BFD_RELOC_24 | |
| /* checks the range of short jump -127 to 128 */ | |
| #define IS_SJUMP_RANGE(x) ((x > -128) && (x < 129)) | |
| #define HIGH_WORD_MASK 0xff00 | |
| #define LOW_WORD_MASK 0x00ff | |
| static long | |
| get_symbol_value (asymbol *symbol) | |
| { | |
| long relocation = 0; | |
| if (bfd_is_com_section (symbol->section)) | |
| relocation = 0; | |
| else | |
| relocation = symbol->value + | |
| symbol->section->output_section->vma + symbol->section->output_offset; | |
| return relocation; | |
| } | |
| /* This function performs all the maxq relocations. | |
| FIXME: The handling of the addend in the 'BFD_*' | |
| relocations types. */ | |
| static bfd_reloc_status_type | |
| coff_maxq20_reloc (bfd * abfd, | |
| arelent * reloc_entry, | |
| asymbol * symbol_in, | |
| void * data, | |
| asection * input_section ATTRIBUTE_UNUSED, | |
| bfd * output_bfd ATTRIBUTE_UNUSED, | |
| char ** error_message ATTRIBUTE_UNUSED) | |
| { | |
| unsigned char *addr = NULL; | |
| unsigned long x = 0; | |
| long call_addr = 0; | |
| short addend = 0; | |
| long diff = 0; | |
| /* If this is an undefined symbol, return error. */ | |
| if (symbol_in->section == &bfd_und_section | |
| && (symbol_in->flags & BSF_WEAK) == 0) | |
| return bfd_reloc_continue; | |
| if (data && reloc_entry) | |
| { | |
| addr = (unsigned char *) data + reloc_entry->address; | |
| call_addr = call_addr - call_addr; | |
| call_addr = get_symbol_value (symbol_in); | |
| /* Over here the value val stores the 8 bit/16 bit value. We will put a | |
| check if we are moving a 16 bit immediate value into an 8 bit | |
| register. In that case we will generate a Upper bytes into PFX[0] | |
| and move the lower 8 bits as SRC. */ | |
| switch (reloc_entry->howto->type) | |
| { | |
| /* BFD_RELOC_16_PCREL_S2 47 Handles all the relative jumps and | |
| calls Note: Every relative jump or call is in words. */ | |
| case SHORT_JUMP: | |
| /* Handle any addend. */ | |
| addend = reloc_entry->addend; | |
| if (addend > call_addr || addend > 0) | |
| call_addr = symbol_in->section->output_section->vma + addend; | |
| else if (addend < call_addr && addend > 0) | |
| call_addr = call_addr + addend; | |
| else if (addend < 0) | |
| call_addr = call_addr + addend; | |
| diff = ((call_addr << 1) - (reloc_entry->address << 1)); | |
| if (!IS_SJUMP_RANGE (diff)) | |
| { | |
| bfd_perror (_("Can't Make it a Short Jump")); | |
| return bfd_reloc_outofrange; | |
| } | |
| x = bfd_get_16 (abfd, addr); | |
| x = x & LOW_WORD_MASK; | |
| x = x | (diff << 8); | |
| bfd_put_16 (abfd, (bfd_vma) x, addr); | |
| return bfd_reloc_ok; | |
| case ABSOLUTE_ADDR_FOR_DATA: | |
| case LONG_JUMP: | |
| /* BFD_RELOC_14 Handles intersegment or long jumps which might be | |
| from code to code or code to data segment jumps. Note: When this | |
| fucntion is called by gas the section flags somehow do not | |
| contain the info about the section type(CODE or DATA). Thus the | |
| user needs to evoke the linker after assembling the files | |
| because the Code-Code relocs are word aligned but code-data are | |
| byte aligned. */ | |
| addend = (reloc_entry->addend - reloc_entry->addend); | |
| /* Handle any addend. */ | |
| addend = reloc_entry->addend; | |
| /* For relocation involving multiple file added becomes zero thus | |
| this fails - check for zero added. In another case when we try | |
| to add a stub to a file the addend shows the offset from the | |
| start od this file. */ | |
| addend = 0; | |
| if (!bfd_is_com_section (symbol_in->section) && | |
| ((symbol_in->flags & BSF_OLD_COMMON) == 0)) | |
| { | |
| if (reloc_entry->addend > symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if ((reloc_entry->addend < symbol_in->value) | |
| && (reloc_entry->addend != 0)) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend == symbol_in->value) | |
| addend = 0; | |
| } | |
| if (bfd_is_com_section (symbol_in->section) || | |
| ((symbol_in->flags & BSF_OLD_COMMON) != 0)) | |
| addend = reloc_entry->addend; | |
| if (addend < 0 | |
| && (call_addr < (long) (addend * (-1)))) | |
| addend = 0; | |
| call_addr += addend; | |
| /* FIXME: This check does not work well with the assembler, | |
| linker needs to be run always. */ | |
| if ((symbol_in->section->flags & SEC_CODE) == SEC_CODE) | |
| { | |
| /* Convert it into words. */ | |
| call_addr = call_addr >> 1; | |
| if (call_addr > 0xFFFF) /* Intersegment Jump. */ | |
| { | |
| bfd_perror (_("Exceeds Long Jump Range")); | |
| return bfd_reloc_outofrange; | |
| } | |
| } | |
| else | |
| { | |
| /* case ABSOLUTE_ADDR_FOR_DATA : Resolves any code-data | |
| segemnt relocs. These are NOT word aligned. */ | |
| if (call_addr > 0xFFFF) /* Intersegment Jump. */ | |
| { | |
| bfd_perror (_("Absolute address Exceeds 16 bit Range")); | |
| return bfd_reloc_outofrange; | |
| } | |
| } | |
| x = bfd_get_32 (abfd, addr); | |
| x = (x & 0xFF00FF00); | |
| x = (x | ((call_addr & HIGH_WORD_MASK) >> 8)); | |
| x = (x | (call_addr & LOW_WORD_MASK) << 16); | |
| bfd_put_32 (abfd, (bfd_vma) x, addr); | |
| return bfd_reloc_ok; | |
| case BFD_RELOC_8: | |
| addend = (reloc_entry->addend - reloc_entry->addend); | |
| if (!bfd_is_com_section (symbol_in->section) && | |
| ((symbol_in->flags & BSF_OLD_COMMON) == 0)) | |
| { | |
| if (reloc_entry->addend > symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend < symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend == symbol_in->value) | |
| addend = 0; | |
| } | |
| if (bfd_is_com_section (symbol_in->section) || | |
| ((symbol_in->flags & BSF_OLD_COMMON) != 0)) | |
| addend = reloc_entry->addend; | |
| if (addend < 0 | |
| && (call_addr < (long) (addend * (-1)))) | |
| addend = 0; | |
| if (call_addr + addend > 0xFF) | |
| { | |
| bfd_perror (_("Absolute address Exceeds 8 bit Range")); | |
| return bfd_reloc_outofrange; | |
| } | |
| x = bfd_get_8 (abfd, addr); | |
| x = x & 0x00; | |
| x = x | (call_addr + addend); | |
| bfd_put_8 (abfd, (bfd_vma) x, addr); | |
| return bfd_reloc_ok; | |
| case BFD_RELOC_16: | |
| addend = (reloc_entry->addend - reloc_entry->addend); | |
| if (!bfd_is_com_section (symbol_in->section) && | |
| ((symbol_in->flags & BSF_OLD_COMMON) == 0)) | |
| { | |
| if (reloc_entry->addend > symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend < symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend == symbol_in->value) | |
| addend = 0; | |
| } | |
| if (bfd_is_com_section (symbol_in->section) || | |
| ((symbol_in->flags & BSF_OLD_COMMON) != 0)) | |
| addend = reloc_entry->addend; | |
| if (addend < 0 | |
| && (call_addr < (long) (addend * (-1)))) | |
| addend = 0; | |
| if ((call_addr + addend) > 0xFFFF) | |
| { | |
| bfd_perror (_("Absolute address Exceeds 16 bit Range")); | |
| return bfd_reloc_outofrange; | |
| } | |
| else | |
| { | |
| unsigned short val = (call_addr + addend); | |
| x = bfd_get_16 (abfd, addr); | |
| /* LE */ | |
| x = (x & 0x0000); /* Flush garbage value. */ | |
| x = val; | |
| if ((symbol_in->section->flags & SEC_CODE) == SEC_CODE) | |
| x = x >> 1; /* Convert it into words. */ | |
| } | |
| bfd_put_16 (abfd, (bfd_vma) x, addr); | |
| return bfd_reloc_ok; | |
| case BFD_RELOC_32: | |
| addend = (reloc_entry->addend - reloc_entry->addend); | |
| if (!bfd_is_com_section (symbol_in->section) && | |
| ((symbol_in->flags & BSF_OLD_COMMON) == 0)) | |
| { | |
| if (reloc_entry->addend > symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend < symbol_in->value) | |
| addend = reloc_entry->addend - symbol_in->value; | |
| if (reloc_entry->addend == symbol_in->value) | |
| addend = 0; | |
| } | |
| if (bfd_is_com_section (symbol_in->section) || | |
| ((symbol_in->flags & BSF_OLD_COMMON) != 0)) | |
| addend = reloc_entry->addend; | |
| if (addend < 0 | |
| && (call_addr < (long) (addend * (-1)))) | |
| addend = 0; | |
| if ((call_addr + addend) < 0) | |
| { | |
| bfd_perror ("Absolute address Exceeds 32 bit Range"); | |
| return bfd_reloc_outofrange; | |
| } | |
| x = bfd_get_32 (abfd, addr); | |
| x = (x & 0x0000); /* Flush garbage value. */ | |
| x = call_addr + addend; | |
| if ((symbol_in->section->flags & SEC_CODE) == SEC_CODE) | |
| x = x >> 1; /* Convert it into words. */ | |
| bfd_put_32 (abfd, (bfd_vma) x, addr); | |
| return bfd_reloc_ok; | |
| default: | |
| bfd_perror (_("Unrecognized Reloc Type")); | |
| return bfd_reloc_notsupported; | |
| } | |
| } | |
| return bfd_reloc_notsupported; | |
| } | |
| static reloc_howto_type howto_table[] = | |
| { | |
| EMPTY_HOWTO (0), | |
| EMPTY_HOWTO (1), | |
| { | |
| BFD_RELOC_32, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, | |
| coff_maxq20_reloc, "32Bit", TRUE, 0x000000ff, 0x000000ff, TRUE | |
| }, | |
| { | |
| SHORT_JUMP, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, | |
| coff_maxq20_reloc, "SHORT_JMP", TRUE, 0x000000ff, 0x000000ff, TRUE | |
| }, | |
| { | |
| ABSOLUTE_ADDR_FOR_DATA, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, | |
| coff_maxq20_reloc, "INTERSEGMENT_RELOC", TRUE, 0x00000000, 0x00000000, | |
| FALSE | |
| }, | |
| { | |
| BFD_RELOC_16, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, | |
| coff_maxq20_reloc, "16Bit", TRUE, 0x000000ff, 0x000000ff, TRUE | |
| }, | |
| { | |
| LONG_JUMP, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, | |
| coff_maxq20_reloc, "LONG_JUMP", TRUE, 0x00000000, 0x00000000, FALSE | |
| }, | |
| { | |
| BFD_RELOC_8, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, | |
| coff_maxq20_reloc, "8bit", TRUE, 0x000000ff, 0x000000ff, TRUE | |
| }, | |
| EMPTY_HOWTO (8), | |
| EMPTY_HOWTO (9), | |
| EMPTY_HOWTO (10), | |
| }; | |
| static reloc_howto_type * | |
| maxq_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, | |
| bfd_reloc_code_real_type code) | |
| { | |
| switch (code) | |
| { | |
| /* SHORT JUMP */ | |
| case BFD_RELOC_16_PCREL_S2: | |
| return howto_table + 3; | |
| /* INTERSEGMENT JUMP */ | |
| case BFD_RELOC_24: | |
| return howto_table + 4; | |
| /* BYTE RELOC */ | |
| case BFD_RELOC_8: | |
| return howto_table + 7; | |
| /* WORD RELOC */ | |
| case BFD_RELOC_16: | |
| return howto_table + 5; | |
| /* LONG RELOC */ | |
| case BFD_RELOC_32: | |
| return howto_table + 2; | |
| /* LONG JUMP */ | |
| case BFD_RELOC_14: | |
| return howto_table + 6; | |
| default: | |
| return NULL; | |
| } | |
| } | |
| static reloc_howto_type * | |
| maxq_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, const char *r_name) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < sizeof (howto_table) / sizeof (howto_table[0]); i++) | |
| if (howto_table[i].name != NULL | |
| && strcasecmp (howto_table[i].name, r_name) == 0) | |
| return &howto_table[i]; | |
| return NULL; | |
| } | |
| #define coff_bfd_reloc_type_lookup maxq_reloc_type_lookup | |
| #define coff_bfd_reloc_name_lookup maxq_reloc_name_lookup | |
| /* Perform any necessary magic to the addend in a reloc entry. */ | |
| #define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \ | |
| cache_ptr->addend = ext_reloc.r_offset; | |
| #include "coffcode.h" | |
| #ifndef TARGET_UNDERSCORE | |
| #define TARGET_UNDERSCORE 1 | |
| #endif | |
| #ifndef EXTRA_S_FLAGS | |
| #define EXTRA_S_FLAGS 0 | |
| #endif | |
| /* Forward declaration for use initialising alternative_target field. */ | |
| CREATE_LITTLE_COFF_TARGET_VEC (maxqcoff_vec, "coff-maxq", 0, EXTRA_S_FLAGS, | |
| TARGET_UNDERSCORE, NULL, COFF_SWAP_TABLE); | |