| /* BFD back-end for Renesas Super-H COFF binaries. | |
| Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, | |
| 2003, 2004, 2005, 2007 Free Software Foundation, Inc. | |
| Contributed by Cygnus Support. | |
| Written by Steve Chamberlain, <sac@cygnus.com>. | |
| Relaxing code written by Ian Lance Taylor, <ian@cygnus.com>. | |
| This file is part of BFD, the Binary File Descriptor library. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, | |
| MA 02110-1301, USA. */ | |
| #include "sysdep.h" | |
| #include "bfd.h" | |
| #include "libiberty.h" | |
| #include "libbfd.h" | |
| #include "bfdlink.h" | |
| #include "coff/sh.h" | |
| #include "coff/internal.h" | |
| #ifdef COFF_WITH_PE | |
| #include "coff/pe.h" | |
| #ifndef COFF_IMAGE_WITH_PE | |
| static bfd_boolean sh_align_load_span | |
| PARAMS ((bfd *, asection *, bfd_byte *, | |
| bfd_boolean (*) (bfd *, asection *, PTR, bfd_byte *, bfd_vma), | |
| PTR, bfd_vma **, bfd_vma *, bfd_vma, bfd_vma, bfd_boolean *)); | |
| #define _bfd_sh_align_load_span sh_align_load_span | |
| #endif | |
| #endif | |
| #include "libcoff.h" | |
| /* Internal functions. */ | |
| static bfd_reloc_status_type sh_reloc | |
| PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); | |
| static long get_symbol_value PARAMS ((asymbol *)); | |
| static bfd_boolean sh_relax_section | |
| PARAMS ((bfd *, asection *, struct bfd_link_info *, bfd_boolean *)); | |
| static bfd_boolean sh_relax_delete_bytes | |
| PARAMS ((bfd *, asection *, bfd_vma, int)); | |
| #ifndef COFF_IMAGE_WITH_PE | |
| static const struct sh_opcode *sh_insn_info PARAMS ((unsigned int)); | |
| #endif | |
| static bfd_boolean sh_align_loads | |
| PARAMS ((bfd *, asection *, struct internal_reloc *, bfd_byte *, | |
| bfd_boolean *)); | |
| static bfd_boolean sh_swap_insns | |
| PARAMS ((bfd *, asection *, PTR, bfd_byte *, bfd_vma)); | |
| static bfd_boolean sh_relocate_section | |
| PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, | |
| struct internal_reloc *, struct internal_syment *, asection **)); | |
| static bfd_byte *sh_coff_get_relocated_section_contents | |
| PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_order *, | |
| bfd_byte *, bfd_boolean, asymbol **)); | |
| static reloc_howto_type * sh_coff_reloc_type_lookup PARAMS ((bfd *, bfd_reloc_code_real_type)); | |
| #ifdef COFF_WITH_PE | |
| /* Can't build import tables with 2**4 alignment. */ | |
| #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 2 | |
| #else | |
| /* Default section alignment to 2**4. */ | |
| #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 4 | |
| #endif | |
| #ifdef COFF_IMAGE_WITH_PE | |
| /* Align PE executables. */ | |
| #define COFF_PAGE_SIZE 0x1000 | |
| #endif | |
| /* Generate long file names. */ | |
| #define COFF_LONG_FILENAMES | |
| #ifdef COFF_WITH_PE | |
| static bfd_boolean in_reloc_p PARAMS ((bfd *, reloc_howto_type *)); | |
| /* Return TRUE if this relocation should | |
| appear in the output .reloc section. */ | |
| static bfd_boolean in_reloc_p (abfd, howto) | |
| bfd * abfd ATTRIBUTE_UNUSED; | |
| reloc_howto_type * howto; | |
| { | |
| return ! howto->pc_relative && howto->type != R_SH_IMAGEBASE; | |
| } | |
| #endif | |
| /* The supported relocations. There are a lot of relocations defined | |
| in coff/internal.h which we do not expect to ever see. */ | |
| static reloc_howto_type sh_coff_howtos[] = | |
| { | |
| EMPTY_HOWTO (0), | |
| EMPTY_HOWTO (1), | |
| #ifdef COFF_WITH_PE | |
| /* Windows CE */ | |
| HOWTO (R_SH_IMM32CE, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_imm32ce", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| #else | |
| EMPTY_HOWTO (2), | |
| #endif | |
| EMPTY_HOWTO (3), /* R_SH_PCREL8 */ | |
| EMPTY_HOWTO (4), /* R_SH_PCREL16 */ | |
| EMPTY_HOWTO (5), /* R_SH_HIGH8 */ | |
| EMPTY_HOWTO (6), /* R_SH_IMM24 */ | |
| EMPTY_HOWTO (7), /* R_SH_LOW16 */ | |
| EMPTY_HOWTO (8), | |
| EMPTY_HOWTO (9), /* R_SH_PCDISP8BY4 */ | |
| HOWTO (R_SH_PCDISP8BY2, /* type */ | |
| 1, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 8, /* bitsize */ | |
| TRUE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_signed, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_pcdisp8by2", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xff, /* src_mask */ | |
| 0xff, /* dst_mask */ | |
| TRUE), /* pcrel_offset */ | |
| EMPTY_HOWTO (11), /* R_SH_PCDISP8 */ | |
| HOWTO (R_SH_PCDISP, /* type */ | |
| 1, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 12, /* bitsize */ | |
| TRUE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_signed, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_pcdisp12by2", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xfff, /* src_mask */ | |
| 0xfff, /* dst_mask */ | |
| TRUE), /* pcrel_offset */ | |
| EMPTY_HOWTO (13), | |
| HOWTO (R_SH_IMM32, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_imm32", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| EMPTY_HOWTO (15), | |
| #ifdef COFF_WITH_PE | |
| HOWTO (R_SH_IMAGEBASE, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "rva32", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| #else | |
| EMPTY_HOWTO (16), /* R_SH_IMM8 */ | |
| #endif | |
| EMPTY_HOWTO (17), /* R_SH_IMM8BY2 */ | |
| EMPTY_HOWTO (18), /* R_SH_IMM8BY4 */ | |
| EMPTY_HOWTO (19), /* R_SH_IMM4 */ | |
| EMPTY_HOWTO (20), /* R_SH_IMM4BY2 */ | |
| EMPTY_HOWTO (21), /* R_SH_IMM4BY4 */ | |
| HOWTO (R_SH_PCRELIMM8BY2, /* type */ | |
| 1, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 8, /* bitsize */ | |
| TRUE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_unsigned, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_pcrelimm8by2", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xff, /* src_mask */ | |
| 0xff, /* dst_mask */ | |
| TRUE), /* pcrel_offset */ | |
| HOWTO (R_SH_PCRELIMM8BY4, /* type */ | |
| 2, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 8, /* bitsize */ | |
| TRUE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_unsigned, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_pcrelimm8by4", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xff, /* src_mask */ | |
| 0xff, /* dst_mask */ | |
| TRUE), /* pcrel_offset */ | |
| HOWTO (R_SH_IMM16, /* type */ | |
| 0, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 16, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_imm16", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffff, /* src_mask */ | |
| 0xffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_SWITCH16, /* type */ | |
| 0, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 16, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_switch16", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffff, /* src_mask */ | |
| 0xffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_SWITCH32, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_switch32", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_USES, /* type */ | |
| 0, /* rightshift */ | |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 16, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_uses", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffff, /* src_mask */ | |
| 0xffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_COUNT, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_count", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_ALIGN, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_align", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_CODE, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_code", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_DATA, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_data", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_LABEL, /* type */ | |
| 0, /* rightshift */ | |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 32, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_label", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xffffffff, /* src_mask */ | |
| 0xffffffff, /* dst_mask */ | |
| FALSE), /* pcrel_offset */ | |
| HOWTO (R_SH_SWITCH8, /* type */ | |
| 0, /* rightshift */ | |
| 0, /* size (0 = byte, 1 = short, 2 = long) */ | |
| 8, /* bitsize */ | |
| FALSE, /* pc_relative */ | |
| 0, /* bitpos */ | |
| complain_overflow_bitfield, /* complain_on_overflow */ | |
| sh_reloc, /* special_function */ | |
| "r_switch8", /* name */ | |
| TRUE, /* partial_inplace */ | |
| 0xff, /* src_mask */ | |
| 0xff, /* dst_mask */ | |
| FALSE) /* pcrel_offset */ | |
| }; | |
| #define SH_COFF_HOWTO_COUNT (sizeof sh_coff_howtos / sizeof sh_coff_howtos[0]) | |
| /* Check for a bad magic number. */ | |
| #define BADMAG(x) SHBADMAG(x) | |
| /* Customize coffcode.h (this is not currently used). */ | |
| #define SH 1 | |
| /* FIXME: This should not be set here. */ | |
| #define __A_MAGIC_SET__ | |
| #ifndef COFF_WITH_PE | |
| /* Swap the r_offset field in and out. */ | |
| #define SWAP_IN_RELOC_OFFSET H_GET_32 | |
| #define SWAP_OUT_RELOC_OFFSET H_PUT_32 | |
| /* Swap out extra information in the reloc structure. */ | |
| #define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \ | |
| do \ | |
| { \ | |
| dst->r_stuff[0] = 'S'; \ | |
| dst->r_stuff[1] = 'C'; \ | |
| } \ | |
| while (0) | |
| #endif | |
| /* Get the value of a symbol, when performing a relocation. */ | |
| static long | |
| get_symbol_value (symbol) | |
| asymbol *symbol; | |
| { | |
| bfd_vma relocation; | |
| if (bfd_is_com_section (symbol->section)) | |
| relocation = 0; | |
| else | |
| relocation = (symbol->value + | |
| symbol->section->output_section->vma + | |
| symbol->section->output_offset); | |
| return relocation; | |
| } | |
| #ifdef COFF_WITH_PE | |
| /* Convert an rtype to howto for the COFF backend linker. | |
| Copied from coff-i386. */ | |
| #define coff_rtype_to_howto coff_sh_rtype_to_howto | |
| static reloc_howto_type * coff_sh_rtype_to_howto PARAMS ((bfd *, asection *, struct internal_reloc *, struct coff_link_hash_entry *, struct internal_syment *, bfd_vma *)); | |
| static reloc_howto_type * | |
| coff_sh_rtype_to_howto (abfd, sec, rel, h, sym, addendp) | |
| bfd * abfd ATTRIBUTE_UNUSED; | |
| asection * sec; | |
| struct internal_reloc * rel; | |
| struct coff_link_hash_entry * h; | |
| struct internal_syment * sym; | |
| bfd_vma * addendp; | |
| { | |
| reloc_howto_type * howto; | |
| howto = sh_coff_howtos + rel->r_type; | |
| *addendp = 0; | |
| if (howto->pc_relative) | |
| *addendp += sec->vma; | |
| if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0) | |
| { | |
| /* This is a common symbol. The section contents include the | |
| size (sym->n_value) as an addend. The relocate_section | |
| function will be adding in the final value of the symbol. We | |
| need to subtract out the current size in order to get the | |
| correct result. */ | |
| BFD_ASSERT (h != NULL); | |
| } | |
| if (howto->pc_relative) | |
| { | |
| *addendp -= 4; | |
| /* If the symbol is defined, then the generic code is going to | |
| add back the symbol value in order to cancel out an | |
| adjustment it made to the addend. However, we set the addend | |
| to 0 at the start of this function. We need to adjust here, | |
| to avoid the adjustment the generic code will make. FIXME: | |
| This is getting a bit hackish. */ | |
| if (sym != NULL && sym->n_scnum != 0) | |
| *addendp -= sym->n_value; | |
| } | |
| if (rel->r_type == R_SH_IMAGEBASE) | |
| *addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase; | |
| return howto; | |
| } | |
| #endif /* COFF_WITH_PE */ | |
| /* This structure is used to map BFD reloc codes to SH PE relocs. */ | |
| struct shcoff_reloc_map | |
| { | |
| bfd_reloc_code_real_type bfd_reloc_val; | |
| unsigned char shcoff_reloc_val; | |
| }; | |
| #ifdef COFF_WITH_PE | |
| /* An array mapping BFD reloc codes to SH PE relocs. */ | |
| static const struct shcoff_reloc_map sh_reloc_map[] = | |
| { | |
| { BFD_RELOC_32, R_SH_IMM32CE }, | |
| { BFD_RELOC_RVA, R_SH_IMAGEBASE }, | |
| { BFD_RELOC_CTOR, R_SH_IMM32CE }, | |
| }; | |
| #else | |
| /* An array mapping BFD reloc codes to SH PE relocs. */ | |
| static const struct shcoff_reloc_map sh_reloc_map[] = | |
| { | |
| { BFD_RELOC_32, R_SH_IMM32 }, | |
| { BFD_RELOC_CTOR, R_SH_IMM32 }, | |
| }; | |
| #endif | |
| /* Given a BFD reloc code, return the howto structure for the | |
| corresponding SH PE reloc. */ | |
| #define coff_bfd_reloc_type_lookup sh_coff_reloc_type_lookup | |
| #define coff_bfd_reloc_name_lookup sh_coff_reloc_name_lookup | |
| static reloc_howto_type * | |
| sh_coff_reloc_type_lookup (abfd, code) | |
| bfd * abfd ATTRIBUTE_UNUSED; | |
| bfd_reloc_code_real_type code; | |
| { | |
| unsigned int i; | |
| for (i = ARRAY_SIZE (sh_reloc_map); i--;) | |
| if (sh_reloc_map[i].bfd_reloc_val == code) | |
| return &sh_coff_howtos[(int) sh_reloc_map[i].shcoff_reloc_val]; | |
| fprintf (stderr, "SH Error: unknown reloc type %d\n", code); | |
| return NULL; | |
| } | |
| static reloc_howto_type * | |
| sh_coff_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, | |
| const char *r_name) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < sizeof (sh_coff_howtos) / sizeof (sh_coff_howtos[0]); i++) | |
| if (sh_coff_howtos[i].name != NULL | |
| && strcasecmp (sh_coff_howtos[i].name, r_name) == 0) | |
| return &sh_coff_howtos[i]; | |
| return NULL; | |
| } | |
| /* This macro is used in coffcode.h to get the howto corresponding to | |
| an internal reloc. */ | |
| #define RTYPE2HOWTO(relent, internal) \ | |
| ((relent)->howto = \ | |
| ((internal)->r_type < SH_COFF_HOWTO_COUNT \ | |
| ? &sh_coff_howtos[(internal)->r_type] \ | |
| : (reloc_howto_type *) NULL)) | |
| /* This is the same as the macro in coffcode.h, except that it copies | |
| r_offset into reloc_entry->addend for some relocs. */ | |
| #define CALC_ADDEND(abfd, ptr, reloc, cache_ptr) \ | |
| { \ | |
| coff_symbol_type *coffsym = (coff_symbol_type *) NULL; \ | |
| if (ptr && bfd_asymbol_bfd (ptr) != abfd) \ | |
| coffsym = (obj_symbols (abfd) \ | |
| + (cache_ptr->sym_ptr_ptr - symbols)); \ | |
| else if (ptr) \ | |
| coffsym = coff_symbol_from (abfd, ptr); \ | |
| if (coffsym != (coff_symbol_type *) NULL \ | |
| && coffsym->native->u.syment.n_scnum == 0) \ | |
| cache_ptr->addend = 0; \ | |
| else if (ptr && bfd_asymbol_bfd (ptr) == abfd \ | |
| && ptr->section != (asection *) NULL) \ | |
| cache_ptr->addend = - (ptr->section->vma + ptr->value); \ | |
| else \ | |
| cache_ptr->addend = 0; \ | |
| if ((reloc).r_type == R_SH_SWITCH8 \ | |
| || (reloc).r_type == R_SH_SWITCH16 \ | |
| || (reloc).r_type == R_SH_SWITCH32 \ | |
| || (reloc).r_type == R_SH_USES \ | |
| || (reloc).r_type == R_SH_COUNT \ | |
| || (reloc).r_type == R_SH_ALIGN) \ | |
| cache_ptr->addend = (reloc).r_offset; \ | |
| } | |
| /* This is the howto function for the SH relocations. */ | |
| static bfd_reloc_status_type | |
| sh_reloc (abfd, reloc_entry, symbol_in, data, input_section, output_bfd, | |
| error_message) | |
| bfd *abfd; | |
| arelent *reloc_entry; | |
| asymbol *symbol_in; | |
| PTR data; | |
| asection *input_section; | |
| bfd *output_bfd; | |
| char **error_message ATTRIBUTE_UNUSED; | |
| { | |
| unsigned long insn; | |
| bfd_vma sym_value; | |
| unsigned short r_type; | |
| bfd_vma addr = reloc_entry->address; | |
| bfd_byte *hit_data = addr + (bfd_byte *) data; | |
| r_type = reloc_entry->howto->type; | |
| if (output_bfd != NULL) | |
| { | |
| /* Partial linking--do nothing. */ | |
| reloc_entry->address += input_section->output_offset; | |
| return bfd_reloc_ok; | |
| } | |
| /* Almost all relocs have to do with relaxing. If any work must be | |
| done for them, it has been done in sh_relax_section. */ | |
| if (r_type != R_SH_IMM32 | |
| #ifdef COFF_WITH_PE | |
| && r_type != R_SH_IMM32CE | |
| && r_type != R_SH_IMAGEBASE | |
| #endif | |
| && (r_type != R_SH_PCDISP | |
| || (symbol_in->flags & BSF_LOCAL) != 0)) | |
| return bfd_reloc_ok; | |
| if (symbol_in != NULL | |
| && bfd_is_und_section (symbol_in->section)) | |
| return bfd_reloc_undefined; | |
| sym_value = get_symbol_value (symbol_in); | |
| switch (r_type) | |
| { | |
| case R_SH_IMM32: | |
| #ifdef COFF_WITH_PE | |
| case R_SH_IMM32CE: | |
| #endif | |
| insn = bfd_get_32 (abfd, hit_data); | |
| insn += sym_value + reloc_entry->addend; | |
| bfd_put_32 (abfd, (bfd_vma) insn, hit_data); | |
| break; | |
| #ifdef COFF_WITH_PE | |
| case R_SH_IMAGEBASE: | |
| insn = bfd_get_32 (abfd, hit_data); | |
| insn += sym_value + reloc_entry->addend; | |
| insn -= pe_data (input_section->output_section->owner)->pe_opthdr.ImageBase; | |
| bfd_put_32 (abfd, (bfd_vma) insn, hit_data); | |
| break; | |
| #endif | |
| case R_SH_PCDISP: | |
| insn = bfd_get_16 (abfd, hit_data); | |
| sym_value += reloc_entry->addend; | |
| sym_value -= (input_section->output_section->vma | |
| + input_section->output_offset | |
| + addr | |
| + 4); | |
| sym_value += (insn & 0xfff) << 1; | |
| if (insn & 0x800) | |
| sym_value -= 0x1000; | |
| insn = (insn & 0xf000) | (sym_value & 0xfff); | |
| bfd_put_16 (abfd, (bfd_vma) insn, hit_data); | |
| if (sym_value < (bfd_vma) -0x1000 || sym_value >= 0x1000) | |
| return bfd_reloc_overflow; | |
| break; | |
| default: | |
| abort (); | |
| break; | |
| } | |
| return bfd_reloc_ok; | |
| } | |
| #define coff_bfd_merge_private_bfd_data _bfd_generic_verify_endian_match | |
| /* We can do relaxing. */ | |
| #define coff_bfd_relax_section sh_relax_section | |
| /* We use the special COFF backend linker. */ | |
| #define coff_relocate_section sh_relocate_section | |
| /* When relaxing, we need to use special code to get the relocated | |
| section contents. */ | |
| #define coff_bfd_get_relocated_section_contents \ | |
| sh_coff_get_relocated_section_contents | |
| #include "coffcode.h" | |
| /* This function handles relaxing on the SH. | |
| Function calls on the SH look like this: | |
| movl L1,r0 | |
| ... | |
| jsr @r0 | |
| ... | |
| L1: | |
| .long function | |
| The compiler and assembler will cooperate to create R_SH_USES | |
| relocs on the jsr instructions. The r_offset field of the | |
| R_SH_USES reloc is the PC relative offset to the instruction which | |
| loads the register (the r_offset field is computed as though it | |
| were a jump instruction, so the offset value is actually from four | |
| bytes past the instruction). The linker can use this reloc to | |
| determine just which function is being called, and thus decide | |
| whether it is possible to replace the jsr with a bsr. | |
| If multiple function calls are all based on a single register load | |
| (i.e., the same function is called multiple times), the compiler | |
| guarantees that each function call will have an R_SH_USES reloc. | |
| Therefore, if the linker is able to convert each R_SH_USES reloc | |
| which refers to that address, it can safely eliminate the register | |
| load. | |
| When the assembler creates an R_SH_USES reloc, it examines it to | |
| determine which address is being loaded (L1 in the above example). | |
| It then counts the number of references to that address, and | |
| creates an R_SH_COUNT reloc at that address. The r_offset field of | |
| the R_SH_COUNT reloc will be the number of references. If the | |
| linker is able to eliminate a register load, it can use the | |
| R_SH_COUNT reloc to see whether it can also eliminate the function | |
| address. | |
| SH relaxing also handles another, unrelated, matter. On the SH, if | |
| a load or store instruction is not aligned on a four byte boundary, | |
| the memory cycle interferes with the 32 bit instruction fetch, | |
| causing a one cycle bubble in the pipeline. Therefore, we try to | |
| align load and store instructions on four byte boundaries if we | |
| can, by swapping them with one of the adjacent instructions. */ | |
| static bfd_boolean | |
| sh_relax_section (abfd, sec, link_info, again) | |
| bfd *abfd; | |
| asection *sec; | |
| struct bfd_link_info *link_info; | |
| bfd_boolean *again; | |
| { | |
| struct internal_reloc *internal_relocs; | |
| bfd_boolean have_code; | |
| struct internal_reloc *irel, *irelend; | |
| bfd_byte *contents = NULL; | |
| *again = FALSE; | |
| if (link_info->relocatable | |
| || (sec->flags & SEC_RELOC) == 0 | |
| || sec->reloc_count == 0) | |
| return TRUE; | |
| if (coff_section_data (abfd, sec) == NULL) | |
| { | |
| bfd_size_type amt = sizeof (struct coff_section_tdata); | |
| sec->used_by_bfd = (PTR) bfd_zalloc (abfd, amt); | |
| if (sec->used_by_bfd == NULL) | |
| return FALSE; | |
| } | |
| internal_relocs = (_bfd_coff_read_internal_relocs | |
| (abfd, sec, link_info->keep_memory, | |
| (bfd_byte *) NULL, FALSE, | |
| (struct internal_reloc *) NULL)); | |
| if (internal_relocs == NULL) | |
| goto error_return; | |
| have_code = FALSE; | |
| irelend = internal_relocs + sec->reloc_count; | |
| for (irel = internal_relocs; irel < irelend; irel++) | |
| { | |
| bfd_vma laddr, paddr, symval; | |
| unsigned short insn; | |
| struct internal_reloc *irelfn, *irelscan, *irelcount; | |
| struct internal_syment sym; | |
| bfd_signed_vma foff; | |
| if (irel->r_type == R_SH_CODE) | |
| have_code = TRUE; | |
| if (irel->r_type != R_SH_USES) | |
| continue; | |
| /* Get the section contents. */ | |
| if (contents == NULL) | |
| { | |
| if (coff_section_data (abfd, sec)->contents != NULL) | |
| contents = coff_section_data (abfd, sec)->contents; | |
| else | |
| { | |
| if (!bfd_malloc_and_get_section (abfd, sec, &contents)) | |
| goto error_return; | |
| } | |
| } | |
| /* The r_offset field of the R_SH_USES reloc will point us to | |
| the register load. The 4 is because the r_offset field is | |
| computed as though it were a jump offset, which are based | |
| from 4 bytes after the jump instruction. */ | |
| laddr = irel->r_vaddr - sec->vma + 4; | |
| /* Careful to sign extend the 32-bit offset. */ | |
| laddr += ((irel->r_offset & 0xffffffff) ^ 0x80000000) - 0x80000000; | |
| if (laddr >= sec->size) | |
| { | |
| (*_bfd_error_handler) ("%B: 0x%lx: warning: bad R_SH_USES offset", | |
| abfd, (unsigned long) irel->r_vaddr); | |
| continue; | |
| } | |
| insn = bfd_get_16 (abfd, contents + laddr); | |
| /* If the instruction is not mov.l NN,rN, we don't know what to do. */ | |
| if ((insn & 0xf000) != 0xd000) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x", | |
| abfd, (unsigned long) irel->r_vaddr, insn)); | |
| continue; | |
| } | |
| /* Get the address from which the register is being loaded. The | |
| displacement in the mov.l instruction is quadrupled. It is a | |
| displacement from four bytes after the movl instruction, but, | |
| before adding in the PC address, two least significant bits | |
| of the PC are cleared. We assume that the section is aligned | |
| on a four byte boundary. */ | |
| paddr = insn & 0xff; | |
| paddr *= 4; | |
| paddr += (laddr + 4) &~ (bfd_vma) 3; | |
| if (paddr >= sec->size) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: warning: bad R_SH_USES load offset", | |
| abfd, (unsigned long) irel->r_vaddr)); | |
| continue; | |
| } | |
| /* Get the reloc for the address from which the register is | |
| being loaded. This reloc will tell us which function is | |
| actually being called. */ | |
| paddr += sec->vma; | |
| for (irelfn = internal_relocs; irelfn < irelend; irelfn++) | |
| if (irelfn->r_vaddr == paddr | |
| #ifdef COFF_WITH_PE | |
| && (irelfn->r_type == R_SH_IMM32 | |
| || irelfn->r_type == R_SH_IMM32CE | |
| || irelfn->r_type == R_SH_IMAGEBASE) | |
| #else | |
| && irelfn->r_type == R_SH_IMM32 | |
| #endif | |
| ) | |
| break; | |
| if (irelfn >= irelend) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: warning: could not find expected reloc", | |
| abfd, (unsigned long) paddr)); | |
| continue; | |
| } | |
| /* Get the value of the symbol referred to by the reloc. */ | |
| if (! _bfd_coff_get_external_symbols (abfd)) | |
| goto error_return; | |
| bfd_coff_swap_sym_in (abfd, | |
| ((bfd_byte *) obj_coff_external_syms (abfd) | |
| + (irelfn->r_symndx | |
| * bfd_coff_symesz (abfd))), | |
| &sym); | |
| if (sym.n_scnum != 0 && sym.n_scnum != sec->target_index) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: warning: symbol in unexpected section", | |
| abfd, (unsigned long) paddr)); | |
| continue; | |
| } | |
| if (sym.n_sclass != C_EXT) | |
| { | |
| symval = (sym.n_value | |
| - sec->vma | |
| + sec->output_section->vma | |
| + sec->output_offset); | |
| } | |
| else | |
| { | |
| struct coff_link_hash_entry *h; | |
| h = obj_coff_sym_hashes (abfd)[irelfn->r_symndx]; | |
| BFD_ASSERT (h != NULL); | |
| if (h->root.type != bfd_link_hash_defined | |
| && h->root.type != bfd_link_hash_defweak) | |
| { | |
| /* This appears to be a reference to an undefined | |
| symbol. Just ignore it--it will be caught by the | |
| regular reloc processing. */ | |
| continue; | |
| } | |
| symval = (h->root.u.def.value | |
| + h->root.u.def.section->output_section->vma | |
| + h->root.u.def.section->output_offset); | |
| } | |
| symval += bfd_get_32 (abfd, contents + paddr - sec->vma); | |
| /* See if this function call can be shortened. */ | |
| foff = (symval | |
| - (irel->r_vaddr | |
| - sec->vma | |
| + sec->output_section->vma | |
| + sec->output_offset | |
| + 4)); | |
| if (foff < -0x1000 || foff >= 0x1000) | |
| { | |
| /* After all that work, we can't shorten this function call. */ | |
| continue; | |
| } | |
| /* Shorten the function call. */ | |
| /* For simplicity of coding, we are going to modify the section | |
| contents, the section relocs, and the BFD symbol table. We | |
| must tell the rest of the code not to free up this | |
| information. It would be possible to instead create a table | |
| of changes which have to be made, as is done in coff-mips.c; | |
| that would be more work, but would require less memory when | |
| the linker is run. */ | |
| coff_section_data (abfd, sec)->relocs = internal_relocs; | |
| coff_section_data (abfd, sec)->keep_relocs = TRUE; | |
| coff_section_data (abfd, sec)->contents = contents; | |
| coff_section_data (abfd, sec)->keep_contents = TRUE; | |
| obj_coff_keep_syms (abfd) = TRUE; | |
| /* Replace the jsr with a bsr. */ | |
| /* Change the R_SH_USES reloc into an R_SH_PCDISP reloc, and | |
| replace the jsr with a bsr. */ | |
| irel->r_type = R_SH_PCDISP; | |
| irel->r_symndx = irelfn->r_symndx; | |
| if (sym.n_sclass != C_EXT) | |
| { | |
| /* If this needs to be changed because of future relaxing, | |
| it will be handled here like other internal PCDISP | |
| relocs. */ | |
| bfd_put_16 (abfd, | |
| (bfd_vma) 0xb000 | ((foff >> 1) & 0xfff), | |
| contents + irel->r_vaddr - sec->vma); | |
| } | |
| else | |
| { | |
| /* We can't fully resolve this yet, because the external | |
| symbol value may be changed by future relaxing. We let | |
| the final link phase handle it. */ | |
| bfd_put_16 (abfd, (bfd_vma) 0xb000, | |
| contents + irel->r_vaddr - sec->vma); | |
| } | |
| /* See if there is another R_SH_USES reloc referring to the same | |
| register load. */ | |
| for (irelscan = internal_relocs; irelscan < irelend; irelscan++) | |
| if (irelscan->r_type == R_SH_USES | |
| && laddr == irelscan->r_vaddr - sec->vma + 4 + irelscan->r_offset) | |
| break; | |
| if (irelscan < irelend) | |
| { | |
| /* Some other function call depends upon this register load, | |
| and we have not yet converted that function call. | |
| Indeed, we may never be able to convert it. There is | |
| nothing else we can do at this point. */ | |
| continue; | |
| } | |
| /* Look for a R_SH_COUNT reloc on the location where the | |
| function address is stored. Do this before deleting any | |
| bytes, to avoid confusion about the address. */ | |
| for (irelcount = internal_relocs; irelcount < irelend; irelcount++) | |
| if (irelcount->r_vaddr == paddr | |
| && irelcount->r_type == R_SH_COUNT) | |
| break; | |
| /* Delete the register load. */ | |
| if (! sh_relax_delete_bytes (abfd, sec, laddr, 2)) | |
| goto error_return; | |
| /* That will change things, so, just in case it permits some | |
| other function call to come within range, we should relax | |
| again. Note that this is not required, and it may be slow. */ | |
| *again = TRUE; | |
| /* Now check whether we got a COUNT reloc. */ | |
| if (irelcount >= irelend) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: warning: could not find expected COUNT reloc", | |
| abfd, (unsigned long) paddr)); | |
| continue; | |
| } | |
| /* The number of uses is stored in the r_offset field. We've | |
| just deleted one. */ | |
| if (irelcount->r_offset == 0) | |
| { | |
| ((*_bfd_error_handler) ("%B: 0x%lx: warning: bad count", | |
| abfd, (unsigned long) paddr)); | |
| continue; | |
| } | |
| --irelcount->r_offset; | |
| /* If there are no more uses, we can delete the address. Reload | |
| the address from irelfn, in case it was changed by the | |
| previous call to sh_relax_delete_bytes. */ | |
| if (irelcount->r_offset == 0) | |
| { | |
| if (! sh_relax_delete_bytes (abfd, sec, | |
| irelfn->r_vaddr - sec->vma, 4)) | |
| goto error_return; | |
| } | |
| /* We've done all we can with that function call. */ | |
| } | |
| /* Look for load and store instructions that we can align on four | |
| byte boundaries. */ | |
| if (have_code) | |
| { | |
| bfd_boolean swapped; | |
| /* Get the section contents. */ | |
| if (contents == NULL) | |
| { | |
| if (coff_section_data (abfd, sec)->contents != NULL) | |
| contents = coff_section_data (abfd, sec)->contents; | |
| else | |
| { | |
| if (!bfd_malloc_and_get_section (abfd, sec, &contents)) | |
| goto error_return; | |
| } | |
| } | |
| if (! sh_align_loads (abfd, sec, internal_relocs, contents, &swapped)) | |
| goto error_return; | |
| if (swapped) | |
| { | |
| coff_section_data (abfd, sec)->relocs = internal_relocs; | |
| coff_section_data (abfd, sec)->keep_relocs = TRUE; | |
| coff_section_data (abfd, sec)->contents = contents; | |
| coff_section_data (abfd, sec)->keep_contents = TRUE; | |
| obj_coff_keep_syms (abfd) = TRUE; | |
| } | |
| } | |
| if (internal_relocs != NULL | |
| && internal_relocs != coff_section_data (abfd, sec)->relocs) | |
| { | |
| if (! link_info->keep_memory) | |
| free (internal_relocs); | |
| else | |
| coff_section_data (abfd, sec)->relocs = internal_relocs; | |
| } | |
| if (contents != NULL && contents != coff_section_data (abfd, sec)->contents) | |
| { | |
| if (! link_info->keep_memory) | |
| free (contents); | |
| else | |
| /* Cache the section contents for coff_link_input_bfd. */ | |
| coff_section_data (abfd, sec)->contents = contents; | |
| } | |
| return TRUE; | |
| error_return: | |
| if (internal_relocs != NULL | |
| && internal_relocs != coff_section_data (abfd, sec)->relocs) | |
| free (internal_relocs); | |
| if (contents != NULL && contents != coff_section_data (abfd, sec)->contents) | |
| free (contents); | |
| return FALSE; | |
| } | |
| /* Delete some bytes from a section while relaxing. */ | |
| static bfd_boolean | |
| sh_relax_delete_bytes (abfd, sec, addr, count) | |
| bfd *abfd; | |
| asection *sec; | |
| bfd_vma addr; | |
| int count; | |
| { | |
| bfd_byte *contents; | |
| struct internal_reloc *irel, *irelend; | |
| struct internal_reloc *irelalign; | |
| bfd_vma toaddr; | |
| bfd_byte *esym, *esymend; | |
| bfd_size_type symesz; | |
| struct coff_link_hash_entry **sym_hash; | |
| asection *o; | |
| contents = coff_section_data (abfd, sec)->contents; | |
| /* The deletion must stop at the next ALIGN reloc for an aligment | |
| power larger than the number of bytes we are deleting. */ | |
| irelalign = NULL; | |
| toaddr = sec->size; | |
| irel = coff_section_data (abfd, sec)->relocs; | |
| irelend = irel + sec->reloc_count; | |
| for (; irel < irelend; irel++) | |
| { | |
| if (irel->r_type == R_SH_ALIGN | |
| && irel->r_vaddr - sec->vma > addr | |
| && count < (1 << irel->r_offset)) | |
| { | |
| irelalign = irel; | |
| toaddr = irel->r_vaddr - sec->vma; | |
| break; | |
| } | |
| } | |
| /* Actually delete the bytes. */ | |
| memmove (contents + addr, contents + addr + count, | |
| (size_t) (toaddr - addr - count)); | |
| if (irelalign == NULL) | |
| sec->size -= count; | |
| else | |
| { | |
| int i; | |
| #define NOP_OPCODE (0x0009) | |
| BFD_ASSERT ((count & 1) == 0); | |
| for (i = 0; i < count; i += 2) | |
| bfd_put_16 (abfd, (bfd_vma) NOP_OPCODE, contents + toaddr - count + i); | |
| } | |
| /* Adjust all the relocs. */ | |
| for (irel = coff_section_data (abfd, sec)->relocs; irel < irelend; irel++) | |
| { | |
| bfd_vma nraddr, stop; | |
| bfd_vma start = 0; | |
| int insn = 0; | |
| struct internal_syment sym; | |
| int off, adjust, oinsn; | |
| bfd_signed_vma voff = 0; | |
| bfd_boolean overflow; | |
| /* Get the new reloc address. */ | |
| nraddr = irel->r_vaddr - sec->vma; | |
| if ((irel->r_vaddr - sec->vma > addr | |
| && irel->r_vaddr - sec->vma < toaddr) | |
| || (irel->r_type == R_SH_ALIGN | |
| && irel->r_vaddr - sec->vma == toaddr)) | |
| nraddr -= count; | |
| /* See if this reloc was for the bytes we have deleted, in which | |
| case we no longer care about it. Don't delete relocs which | |
| represent addresses, though. */ | |
| if (irel->r_vaddr - sec->vma >= addr | |
| && irel->r_vaddr - sec->vma < addr + count | |
| && irel->r_type != R_SH_ALIGN | |
| && irel->r_type != R_SH_CODE | |
| && irel->r_type != R_SH_DATA | |
| && irel->r_type != R_SH_LABEL) | |
| irel->r_type = R_SH_UNUSED; | |
| /* If this is a PC relative reloc, see if the range it covers | |
| includes the bytes we have deleted. */ | |
| switch (irel->r_type) | |
| { | |
| default: | |
| break; | |
| case R_SH_PCDISP8BY2: | |
| case R_SH_PCDISP: | |
| case R_SH_PCRELIMM8BY2: | |
| case R_SH_PCRELIMM8BY4: | |
| start = irel->r_vaddr - sec->vma; | |
| insn = bfd_get_16 (abfd, contents + nraddr); | |
| break; | |
| } | |
| switch (irel->r_type) | |
| { | |
| default: | |
| start = stop = addr; | |
| break; | |
| case R_SH_IMM32: | |
| #ifdef COFF_WITH_PE | |
| case R_SH_IMM32CE: | |
| case R_SH_IMAGEBASE: | |
| #endif | |
| /* If this reloc is against a symbol defined in this | |
| section, and the symbol will not be adjusted below, we | |
| must check the addend to see it will put the value in | |
| range to be adjusted, and hence must be changed. */ | |
| bfd_coff_swap_sym_in (abfd, | |
| ((bfd_byte *) obj_coff_external_syms (abfd) | |
| + (irel->r_symndx | |
| * bfd_coff_symesz (abfd))), | |
| &sym); | |
| if (sym.n_sclass != C_EXT | |
| && sym.n_scnum == sec->target_index | |
| && ((bfd_vma) sym.n_value <= addr | |
| || (bfd_vma) sym.n_value >= toaddr)) | |
| { | |
| bfd_vma val; | |
| val = bfd_get_32 (abfd, contents + nraddr); | |
| val += sym.n_value; | |
| if (val > addr && val < toaddr) | |
| bfd_put_32 (abfd, val - count, contents + nraddr); | |
| } | |
| start = stop = addr; | |
| break; | |
| case R_SH_PCDISP8BY2: | |
| off = insn & 0xff; | |
| if (off & 0x80) | |
| off -= 0x100; | |
| stop = (bfd_vma) ((bfd_signed_vma) start + 4 + off * 2); | |
| break; | |
| case R_SH_PCDISP: | |
| bfd_coff_swap_sym_in (abfd, | |
| ((bfd_byte *) obj_coff_external_syms (abfd) | |
| + (irel->r_symndx | |
| * bfd_coff_symesz (abfd))), | |
| &sym); | |
| if (sym.n_sclass == C_EXT) | |
| start = stop = addr; | |
| else | |
| { | |
| off = insn & 0xfff; | |
| if (off & 0x800) | |
| off -= 0x1000; | |
| stop = (bfd_vma) ((bfd_signed_vma) start + 4 + off * 2); | |
| } | |
| break; | |
| case R_SH_PCRELIMM8BY2: | |
| off = insn & 0xff; | |
| stop = start + 4 + off * 2; | |
| break; | |
| case R_SH_PCRELIMM8BY4: | |
| off = insn & 0xff; | |
| stop = (start &~ (bfd_vma) 3) + 4 + off * 4; | |
| break; | |
| case R_SH_SWITCH8: | |
| case R_SH_SWITCH16: | |
| case R_SH_SWITCH32: | |
| /* These relocs types represent | |
| .word L2-L1 | |
| The r_offset field holds the difference between the reloc | |
| address and L1. That is the start of the reloc, and | |
| adding in the contents gives us the top. We must adjust | |
| both the r_offset field and the section contents. */ | |
| start = irel->r_vaddr - sec->vma; | |
| stop = (bfd_vma) ((bfd_signed_vma) start - (long) irel->r_offset); | |
| if (start > addr | |
| && start < toaddr | |
| && (stop <= addr || stop >= toaddr)) | |
| irel->r_offset += count; | |
| else if (stop > addr | |
| && stop < toaddr | |
| && (start <= addr || start >= toaddr)) | |
| irel->r_offset -= count; | |
| start = stop; | |
| if (irel->r_type == R_SH_SWITCH16) | |
| voff = bfd_get_signed_16 (abfd, contents + nraddr); | |
| else if (irel->r_type == R_SH_SWITCH8) | |
| voff = bfd_get_8 (abfd, contents + nraddr); | |
| else | |
| voff = bfd_get_signed_32 (abfd, contents + nraddr); | |
| stop = (bfd_vma) ((bfd_signed_vma) start + voff); | |
| break; | |
| case R_SH_USES: | |
| start = irel->r_vaddr - sec->vma; | |
| stop = (bfd_vma) ((bfd_signed_vma) start | |
| + (long) irel->r_offset | |
| + 4); | |
| break; | |
| } | |
| if (start > addr | |
| && start < toaddr | |
| && (stop <= addr || stop >= toaddr)) | |
| adjust = count; | |
| else if (stop > addr | |
| && stop < toaddr | |
| && (start <= addr || start >= toaddr)) | |
| adjust = - count; | |
| else | |
| adjust = 0; | |
| if (adjust != 0) | |
| { | |
| oinsn = insn; | |
| overflow = FALSE; | |
| switch (irel->r_type) | |
| { | |
| default: | |
| abort (); | |
| break; | |
| case R_SH_PCDISP8BY2: | |
| case R_SH_PCRELIMM8BY2: | |
| insn += adjust / 2; | |
| if ((oinsn & 0xff00) != (insn & 0xff00)) | |
| overflow = TRUE; | |
| bfd_put_16 (abfd, (bfd_vma) insn, contents + nraddr); | |
| break; | |
| case R_SH_PCDISP: | |
| insn += adjust / 2; | |
| if ((oinsn & 0xf000) != (insn & 0xf000)) | |
| overflow = TRUE; | |
| bfd_put_16 (abfd, (bfd_vma) insn, contents + nraddr); | |
| break; | |
| case R_SH_PCRELIMM8BY4: | |
| BFD_ASSERT (adjust == count || count >= 4); | |
| if (count >= 4) | |
| insn += adjust / 4; | |
| else | |
| { | |
| if ((irel->r_vaddr & 3) == 0) | |
| ++insn; | |
| } | |
| if ((oinsn & 0xff00) != (insn & 0xff00)) | |
| overflow = TRUE; | |
| bfd_put_16 (abfd, (bfd_vma) insn, contents + nraddr); | |
| break; | |
| case R_SH_SWITCH8: | |
| voff += adjust; | |
| if (voff < 0 || voff >= 0xff) | |
| overflow = TRUE; | |
| bfd_put_8 (abfd, (bfd_vma) voff, contents + nraddr); | |
| break; | |
| case R_SH_SWITCH16: | |
| voff += adjust; | |
| if (voff < - 0x8000 || voff >= 0x8000) | |
| overflow = TRUE; | |
| bfd_put_signed_16 (abfd, (bfd_vma) voff, contents + nraddr); | |
| break; | |
| case R_SH_SWITCH32: | |
| voff += adjust; | |
| bfd_put_signed_32 (abfd, (bfd_vma) voff, contents + nraddr); | |
| break; | |
| case R_SH_USES: | |
| irel->r_offset += adjust; | |
| break; | |
| } | |
| if (overflow) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: fatal: reloc overflow while relaxing", | |
| abfd, (unsigned long) irel->r_vaddr)); | |
| bfd_set_error (bfd_error_bad_value); | |
| return FALSE; | |
| } | |
| } | |
| irel->r_vaddr = nraddr + sec->vma; | |
| } | |
| /* Look through all the other sections. If there contain any IMM32 | |
| relocs against internal symbols which we are not going to adjust | |
| below, we may need to adjust the addends. */ | |
| for (o = abfd->sections; o != NULL; o = o->next) | |
| { | |
| struct internal_reloc *internal_relocs; | |
| struct internal_reloc *irelscan, *irelscanend; | |
| bfd_byte *ocontents; | |
| if (o == sec | |
| || (o->flags & SEC_RELOC) == 0 | |
| || o->reloc_count == 0) | |
| continue; | |
| /* We always cache the relocs. Perhaps, if info->keep_memory is | |
| FALSE, we should free them, if we are permitted to, when we | |
| leave sh_coff_relax_section. */ | |
| internal_relocs = (_bfd_coff_read_internal_relocs | |
| (abfd, o, TRUE, (bfd_byte *) NULL, FALSE, | |
| (struct internal_reloc *) NULL)); | |
| if (internal_relocs == NULL) | |
| return FALSE; | |
| ocontents = NULL; | |
| irelscanend = internal_relocs + o->reloc_count; | |
| for (irelscan = internal_relocs; irelscan < irelscanend; irelscan++) | |
| { | |
| struct internal_syment sym; | |
| #ifdef COFF_WITH_PE | |
| if (irelscan->r_type != R_SH_IMM32 | |
| && irelscan->r_type != R_SH_IMAGEBASE | |
| && irelscan->r_type != R_SH_IMM32CE) | |
| #else | |
| if (irelscan->r_type != R_SH_IMM32) | |
| #endif | |
| continue; | |
| bfd_coff_swap_sym_in (abfd, | |
| ((bfd_byte *) obj_coff_external_syms (abfd) | |
| + (irelscan->r_symndx | |
| * bfd_coff_symesz (abfd))), | |
| &sym); | |
| if (sym.n_sclass != C_EXT | |
| && sym.n_scnum == sec->target_index | |
| && ((bfd_vma) sym.n_value <= addr | |
| || (bfd_vma) sym.n_value >= toaddr)) | |
| { | |
| bfd_vma val; | |
| if (ocontents == NULL) | |
| { | |
| if (coff_section_data (abfd, o)->contents != NULL) | |
| ocontents = coff_section_data (abfd, o)->contents; | |
| else | |
| { | |
| if (!bfd_malloc_and_get_section (abfd, o, &ocontents)) | |
| return FALSE; | |
| /* We always cache the section contents. | |
| Perhaps, if info->keep_memory is FALSE, we | |
| should free them, if we are permitted to, | |
| when we leave sh_coff_relax_section. */ | |
| coff_section_data (abfd, o)->contents = ocontents; | |
| } | |
| } | |
| val = bfd_get_32 (abfd, ocontents + irelscan->r_vaddr - o->vma); | |
| val += sym.n_value; | |
| if (val > addr && val < toaddr) | |
| bfd_put_32 (abfd, val - count, | |
| ocontents + irelscan->r_vaddr - o->vma); | |
| coff_section_data (abfd, o)->keep_contents = TRUE; | |
| } | |
| } | |
| } | |
| /* Adjusting the internal symbols will not work if something has | |
| already retrieved the generic symbols. It would be possible to | |
| make this work by adjusting the generic symbols at the same time. | |
| However, this case should not arise in normal usage. */ | |
| if (obj_symbols (abfd) != NULL | |
| || obj_raw_syments (abfd) != NULL) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: fatal: generic symbols retrieved before relaxing", abfd)); | |
| bfd_set_error (bfd_error_invalid_operation); | |
| return FALSE; | |
| } | |
| /* Adjust all the symbols. */ | |
| sym_hash = obj_coff_sym_hashes (abfd); | |
| symesz = bfd_coff_symesz (abfd); | |
| esym = (bfd_byte *) obj_coff_external_syms (abfd); | |
| esymend = esym + obj_raw_syment_count (abfd) * symesz; | |
| while (esym < esymend) | |
| { | |
| struct internal_syment isym; | |
| bfd_coff_swap_sym_in (abfd, (PTR) esym, (PTR) &isym); | |
| if (isym.n_scnum == sec->target_index | |
| && (bfd_vma) isym.n_value > addr | |
| && (bfd_vma) isym.n_value < toaddr) | |
| { | |
| isym.n_value -= count; | |
| bfd_coff_swap_sym_out (abfd, (PTR) &isym, (PTR) esym); | |
| if (*sym_hash != NULL) | |
| { | |
| BFD_ASSERT ((*sym_hash)->root.type == bfd_link_hash_defined | |
| || (*sym_hash)->root.type == bfd_link_hash_defweak); | |
| BFD_ASSERT ((*sym_hash)->root.u.def.value >= addr | |
| && (*sym_hash)->root.u.def.value < toaddr); | |
| (*sym_hash)->root.u.def.value -= count; | |
| } | |
| } | |
| esym += (isym.n_numaux + 1) * symesz; | |
| sym_hash += isym.n_numaux + 1; | |
| } | |
| /* See if we can move the ALIGN reloc forward. We have adjusted | |
| r_vaddr for it already. */ | |
| if (irelalign != NULL) | |
| { | |
| bfd_vma alignto, alignaddr; | |
| alignto = BFD_ALIGN (toaddr, 1 << irelalign->r_offset); | |
| alignaddr = BFD_ALIGN (irelalign->r_vaddr - sec->vma, | |
| 1 << irelalign->r_offset); | |
| if (alignto != alignaddr) | |
| { | |
| /* Tail recursion. */ | |
| return sh_relax_delete_bytes (abfd, sec, alignaddr, | |
| (int) (alignto - alignaddr)); | |
| } | |
| } | |
| return TRUE; | |
| } | |
| /* This is yet another version of the SH opcode table, used to rapidly | |
| get information about a particular instruction. */ | |
| /* The opcode map is represented by an array of these structures. The | |
| array is indexed by the high order four bits in the instruction. */ | |
| struct sh_major_opcode | |
| { | |
| /* A pointer to the instruction list. This is an array which | |
| contains all the instructions with this major opcode. */ | |
| const struct sh_minor_opcode *minor_opcodes; | |
| /* The number of elements in minor_opcodes. */ | |
| unsigned short count; | |
| }; | |
| /* This structure holds information for a set of SH opcodes. The | |
| instruction code is anded with the mask value, and the resulting | |
| value is used to search the order opcode list. */ | |
| struct sh_minor_opcode | |
| { | |
| /* The sorted opcode list. */ | |
| const struct sh_opcode *opcodes; | |
| /* The number of elements in opcodes. */ | |
| unsigned short count; | |
| /* The mask value to use when searching the opcode list. */ | |
| unsigned short mask; | |
| }; | |
| /* This structure holds information for an SH instruction. An array | |
| of these structures is sorted in order by opcode. */ | |
| struct sh_opcode | |
| { | |
| /* The code for this instruction, after it has been anded with the | |
| mask value in the sh_major_opcode structure. */ | |
| unsigned short opcode; | |
| /* Flags for this instruction. */ | |
| unsigned long flags; | |
| }; | |
| /* Flag which appear in the sh_opcode structure. */ | |
| /* This instruction loads a value from memory. */ | |
| #define LOAD (0x1) | |
| /* This instruction stores a value to memory. */ | |
| #define STORE (0x2) | |
| /* This instruction is a branch. */ | |
| #define BRANCH (0x4) | |
| /* This instruction has a delay slot. */ | |
| #define DELAY (0x8) | |
| /* This instruction uses the value in the register in the field at | |
| mask 0x0f00 of the instruction. */ | |
| #define USES1 (0x10) | |
| #define USES1_REG(x) ((x & 0x0f00) >> 8) | |
| /* This instruction uses the value in the register in the field at | |
| mask 0x00f0 of the instruction. */ | |
| #define USES2 (0x20) | |
| #define USES2_REG(x) ((x & 0x00f0) >> 4) | |
| /* This instruction uses the value in register 0. */ | |
| #define USESR0 (0x40) | |
| /* This instruction sets the value in the register in the field at | |
| mask 0x0f00 of the instruction. */ | |
| #define SETS1 (0x80) | |
| #define SETS1_REG(x) ((x & 0x0f00) >> 8) | |
| /* This instruction sets the value in the register in the field at | |
| mask 0x00f0 of the instruction. */ | |
| #define SETS2 (0x100) | |
| #define SETS2_REG(x) ((x & 0x00f0) >> 4) | |
| /* This instruction sets register 0. */ | |
| #define SETSR0 (0x200) | |
| /* This instruction sets a special register. */ | |
| #define SETSSP (0x400) | |
| /* This instruction uses a special register. */ | |
| #define USESSP (0x800) | |
| /* This instruction uses the floating point register in the field at | |
| mask 0x0f00 of the instruction. */ | |
| #define USESF1 (0x1000) | |
| #define USESF1_REG(x) ((x & 0x0f00) >> 8) | |
| /* This instruction uses the floating point register in the field at | |
| mask 0x00f0 of the instruction. */ | |
| #define USESF2 (0x2000) | |
| #define USESF2_REG(x) ((x & 0x00f0) >> 4) | |
| /* This instruction uses floating point register 0. */ | |
| #define USESF0 (0x4000) | |
| /* This instruction sets the floating point register in the field at | |
| mask 0x0f00 of the instruction. */ | |
| #define SETSF1 (0x8000) | |
| #define SETSF1_REG(x) ((x & 0x0f00) >> 8) | |
| #define USESAS (0x10000) | |
| #define USESAS_REG(x) (((((x) >> 8) - 2) & 3) + 2) | |
| #define USESR8 (0x20000) | |
| #define SETSAS (0x40000) | |
| #define SETSAS_REG(x) USESAS_REG (x) | |
| #define MAP(a) a, sizeof a / sizeof a[0] | |
| #ifndef COFF_IMAGE_WITH_PE | |
| static bfd_boolean sh_insn_uses_reg | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); | |
| static bfd_boolean sh_insn_sets_reg | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); | |
| static bfd_boolean sh_insn_uses_or_sets_reg | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); | |
| static bfd_boolean sh_insn_uses_freg | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); | |
| static bfd_boolean sh_insn_sets_freg | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); | |
| static bfd_boolean sh_insn_uses_or_sets_freg | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); | |
| static bfd_boolean sh_insns_conflict | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int, | |
| const struct sh_opcode *)); | |
| static bfd_boolean sh_load_use | |
| PARAMS ((unsigned int, const struct sh_opcode *, unsigned int, | |
| const struct sh_opcode *)); | |
| /* The opcode maps. */ | |
| static const struct sh_opcode sh_opcode00[] = | |
| { | |
| { 0x0008, SETSSP }, /* clrt */ | |
| { 0x0009, 0 }, /* nop */ | |
| { 0x000b, BRANCH | DELAY | USESSP }, /* rts */ | |
| { 0x0018, SETSSP }, /* sett */ | |
| { 0x0019, SETSSP }, /* div0u */ | |
| { 0x001b, 0 }, /* sleep */ | |
| { 0x0028, SETSSP }, /* clrmac */ | |
| { 0x002b, BRANCH | DELAY | SETSSP }, /* rte */ | |
| { 0x0038, USESSP | SETSSP }, /* ldtlb */ | |
| { 0x0048, SETSSP }, /* clrs */ | |
| { 0x0058, SETSSP } /* sets */ | |
| }; | |
| static const struct sh_opcode sh_opcode01[] = | |
| { | |
| { 0x0003, BRANCH | DELAY | USES1 | SETSSP }, /* bsrf rn */ | |
| { 0x000a, SETS1 | USESSP }, /* sts mach,rn */ | |
| { 0x001a, SETS1 | USESSP }, /* sts macl,rn */ | |
| { 0x0023, BRANCH | DELAY | USES1 }, /* braf rn */ | |
| { 0x0029, SETS1 | USESSP }, /* movt rn */ | |
| { 0x002a, SETS1 | USESSP }, /* sts pr,rn */ | |
| { 0x005a, SETS1 | USESSP }, /* sts fpul,rn */ | |
| { 0x006a, SETS1 | USESSP }, /* sts fpscr,rn / sts dsr,rn */ | |
| { 0x0083, LOAD | USES1 }, /* pref @rn */ | |
| { 0x007a, SETS1 | USESSP }, /* sts a0,rn */ | |
| { 0x008a, SETS1 | USESSP }, /* sts x0,rn */ | |
| { 0x009a, SETS1 | USESSP }, /* sts x1,rn */ | |
| { 0x00aa, SETS1 | USESSP }, /* sts y0,rn */ | |
| { 0x00ba, SETS1 | USESSP } /* sts y1,rn */ | |
| }; | |
| static const struct sh_opcode sh_opcode02[] = | |
| { | |
| { 0x0002, SETS1 | USESSP }, /* stc <special_reg>,rn */ | |
| { 0x0004, STORE | USES1 | USES2 | USESR0 }, /* mov.b rm,@(r0,rn) */ | |
| { 0x0005, STORE | USES1 | USES2 | USESR0 }, /* mov.w rm,@(r0,rn) */ | |
| { 0x0006, STORE | USES1 | USES2 | USESR0 }, /* mov.l rm,@(r0,rn) */ | |
| { 0x0007, SETSSP | USES1 | USES2 }, /* mul.l rm,rn */ | |
| { 0x000c, LOAD | SETS1 | USES2 | USESR0 }, /* mov.b @(r0,rm),rn */ | |
| { 0x000d, LOAD | SETS1 | USES2 | USESR0 }, /* mov.w @(r0,rm),rn */ | |
| { 0x000e, LOAD | SETS1 | USES2 | USESR0 }, /* mov.l @(r0,rm),rn */ | |
| { 0x000f, LOAD|SETS1|SETS2|SETSSP|USES1|USES2|USESSP }, /* mac.l @rm+,@rn+ */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode0[] = | |
| { | |
| { MAP (sh_opcode00), 0xffff }, | |
| { MAP (sh_opcode01), 0xf0ff }, | |
| { MAP (sh_opcode02), 0xf00f } | |
| }; | |
| static const struct sh_opcode sh_opcode10[] = | |
| { | |
| { 0x1000, STORE | USES1 | USES2 } /* mov.l rm,@(disp,rn) */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode1[] = | |
| { | |
| { MAP (sh_opcode10), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcode20[] = | |
| { | |
| { 0x2000, STORE | USES1 | USES2 }, /* mov.b rm,@rn */ | |
| { 0x2001, STORE | USES1 | USES2 }, /* mov.w rm,@rn */ | |
| { 0x2002, STORE | USES1 | USES2 }, /* mov.l rm,@rn */ | |
| { 0x2004, STORE | SETS1 | USES1 | USES2 }, /* mov.b rm,@-rn */ | |
| { 0x2005, STORE | SETS1 | USES1 | USES2 }, /* mov.w rm,@-rn */ | |
| { 0x2006, STORE | SETS1 | USES1 | USES2 }, /* mov.l rm,@-rn */ | |
| { 0x2007, SETSSP | USES1 | USES2 | USESSP }, /* div0s */ | |
| { 0x2008, SETSSP | USES1 | USES2 }, /* tst rm,rn */ | |
| { 0x2009, SETS1 | USES1 | USES2 }, /* and rm,rn */ | |
| { 0x200a, SETS1 | USES1 | USES2 }, /* xor rm,rn */ | |
| { 0x200b, SETS1 | USES1 | USES2 }, /* or rm,rn */ | |
| { 0x200c, SETSSP | USES1 | USES2 }, /* cmp/str rm,rn */ | |
| { 0x200d, SETS1 | USES1 | USES2 }, /* xtrct rm,rn */ | |
| { 0x200e, SETSSP | USES1 | USES2 }, /* mulu.w rm,rn */ | |
| { 0x200f, SETSSP | USES1 | USES2 } /* muls.w rm,rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode2[] = | |
| { | |
| { MAP (sh_opcode20), 0xf00f } | |
| }; | |
| static const struct sh_opcode sh_opcode30[] = | |
| { | |
| { 0x3000, SETSSP | USES1 | USES2 }, /* cmp/eq rm,rn */ | |
| { 0x3002, SETSSP | USES1 | USES2 }, /* cmp/hs rm,rn */ | |
| { 0x3003, SETSSP | USES1 | USES2 }, /* cmp/ge rm,rn */ | |
| { 0x3004, SETSSP | USESSP | USES1 | USES2 }, /* div1 rm,rn */ | |
| { 0x3005, SETSSP | USES1 | USES2 }, /* dmulu.l rm,rn */ | |
| { 0x3006, SETSSP | USES1 | USES2 }, /* cmp/hi rm,rn */ | |
| { 0x3007, SETSSP | USES1 | USES2 }, /* cmp/gt rm,rn */ | |
| { 0x3008, SETS1 | USES1 | USES2 }, /* sub rm,rn */ | |
| { 0x300a, SETS1 | SETSSP | USES1 | USES2 | USESSP }, /* subc rm,rn */ | |
| { 0x300b, SETS1 | SETSSP | USES1 | USES2 }, /* subv rm,rn */ | |
| { 0x300c, SETS1 | USES1 | USES2 }, /* add rm,rn */ | |
| { 0x300d, SETSSP | USES1 | USES2 }, /* dmuls.l rm,rn */ | |
| { 0x300e, SETS1 | SETSSP | USES1 | USES2 | USESSP }, /* addc rm,rn */ | |
| { 0x300f, SETS1 | SETSSP | USES1 | USES2 } /* addv rm,rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode3[] = | |
| { | |
| { MAP (sh_opcode30), 0xf00f } | |
| }; | |
| static const struct sh_opcode sh_opcode40[] = | |
| { | |
| { 0x4000, SETS1 | SETSSP | USES1 }, /* shll rn */ | |
| { 0x4001, SETS1 | SETSSP | USES1 }, /* shlr rn */ | |
| { 0x4002, STORE | SETS1 | USES1 | USESSP }, /* sts.l mach,@-rn */ | |
| { 0x4004, SETS1 | SETSSP | USES1 }, /* rotl rn */ | |
| { 0x4005, SETS1 | SETSSP | USES1 }, /* rotr rn */ | |
| { 0x4006, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,mach */ | |
| { 0x4008, SETS1 | USES1 }, /* shll2 rn */ | |
| { 0x4009, SETS1 | USES1 }, /* shlr2 rn */ | |
| { 0x400a, SETSSP | USES1 }, /* lds rm,mach */ | |
| { 0x400b, BRANCH | DELAY | USES1 }, /* jsr @rn */ | |
| { 0x4010, SETS1 | SETSSP | USES1 }, /* dt rn */ | |
| { 0x4011, SETSSP | USES1 }, /* cmp/pz rn */ | |
| { 0x4012, STORE | SETS1 | USES1 | USESSP }, /* sts.l macl,@-rn */ | |
| { 0x4014, SETSSP | USES1 }, /* setrc rm */ | |
| { 0x4015, SETSSP | USES1 }, /* cmp/pl rn */ | |
| { 0x4016, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,macl */ | |
| { 0x4018, SETS1 | USES1 }, /* shll8 rn */ | |
| { 0x4019, SETS1 | USES1 }, /* shlr8 rn */ | |
| { 0x401a, SETSSP | USES1 }, /* lds rm,macl */ | |
| { 0x401b, LOAD | SETSSP | USES1 }, /* tas.b @rn */ | |
| { 0x4020, SETS1 | SETSSP | USES1 }, /* shal rn */ | |
| { 0x4021, SETS1 | SETSSP | USES1 }, /* shar rn */ | |
| { 0x4022, STORE | SETS1 | USES1 | USESSP }, /* sts.l pr,@-rn */ | |
| { 0x4024, SETS1 | SETSSP | USES1 | USESSP }, /* rotcl rn */ | |
| { 0x4025, SETS1 | SETSSP | USES1 | USESSP }, /* rotcr rn */ | |
| { 0x4026, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,pr */ | |
| { 0x4028, SETS1 | USES1 }, /* shll16 rn */ | |
| { 0x4029, SETS1 | USES1 }, /* shlr16 rn */ | |
| { 0x402a, SETSSP | USES1 }, /* lds rm,pr */ | |
| { 0x402b, BRANCH | DELAY | USES1 }, /* jmp @rn */ | |
| { 0x4052, STORE | SETS1 | USES1 | USESSP }, /* sts.l fpul,@-rn */ | |
| { 0x4056, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,fpul */ | |
| { 0x405a, SETSSP | USES1 }, /* lds.l rm,fpul */ | |
| { 0x4062, STORE | SETS1 | USES1 | USESSP }, /* sts.l fpscr / dsr,@-rn */ | |
| { 0x4066, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,fpscr / dsr */ | |
| { 0x406a, SETSSP | USES1 }, /* lds rm,fpscr / lds rm,dsr */ | |
| { 0x4072, STORE | SETS1 | USES1 | USESSP }, /* sts.l a0,@-rn */ | |
| { 0x4076, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,a0 */ | |
| { 0x407a, SETSSP | USES1 }, /* lds.l rm,a0 */ | |
| { 0x4082, STORE | SETS1 | USES1 | USESSP }, /* sts.l x0,@-rn */ | |
| { 0x4086, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,x0 */ | |
| { 0x408a, SETSSP | USES1 }, /* lds.l rm,x0 */ | |
| { 0x4092, STORE | SETS1 | USES1 | USESSP }, /* sts.l x1,@-rn */ | |
| { 0x4096, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,x1 */ | |
| { 0x409a, SETSSP | USES1 }, /* lds.l rm,x1 */ | |
| { 0x40a2, STORE | SETS1 | USES1 | USESSP }, /* sts.l y0,@-rn */ | |
| { 0x40a6, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,y0 */ | |
| { 0x40aa, SETSSP | USES1 }, /* lds.l rm,y0 */ | |
| { 0x40b2, STORE | SETS1 | USES1 | USESSP }, /* sts.l y1,@-rn */ | |
| { 0x40b6, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,y1 */ | |
| { 0x40ba, SETSSP | USES1 } /* lds.l rm,y1 */ | |
| }; | |
| static const struct sh_opcode sh_opcode41[] = | |
| { | |
| { 0x4003, STORE | SETS1 | USES1 | USESSP }, /* stc.l <special_reg>,@-rn */ | |
| { 0x4007, LOAD | SETS1 | SETSSP | USES1 }, /* ldc.l @rm+,<special_reg> */ | |
| { 0x400c, SETS1 | USES1 | USES2 }, /* shad rm,rn */ | |
| { 0x400d, SETS1 | USES1 | USES2 }, /* shld rm,rn */ | |
| { 0x400e, SETSSP | USES1 }, /* ldc rm,<special_reg> */ | |
| { 0x400f, LOAD|SETS1|SETS2|SETSSP|USES1|USES2|USESSP }, /* mac.w @rm+,@rn+ */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode4[] = | |
| { | |
| { MAP (sh_opcode40), 0xf0ff }, | |
| { MAP (sh_opcode41), 0xf00f } | |
| }; | |
| static const struct sh_opcode sh_opcode50[] = | |
| { | |
| { 0x5000, LOAD | SETS1 | USES2 } /* mov.l @(disp,rm),rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode5[] = | |
| { | |
| { MAP (sh_opcode50), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcode60[] = | |
| { | |
| { 0x6000, LOAD | SETS1 | USES2 }, /* mov.b @rm,rn */ | |
| { 0x6001, LOAD | SETS1 | USES2 }, /* mov.w @rm,rn */ | |
| { 0x6002, LOAD | SETS1 | USES2 }, /* mov.l @rm,rn */ | |
| { 0x6003, SETS1 | USES2 }, /* mov rm,rn */ | |
| { 0x6004, LOAD | SETS1 | SETS2 | USES2 }, /* mov.b @rm+,rn */ | |
| { 0x6005, LOAD | SETS1 | SETS2 | USES2 }, /* mov.w @rm+,rn */ | |
| { 0x6006, LOAD | SETS1 | SETS2 | USES2 }, /* mov.l @rm+,rn */ | |
| { 0x6007, SETS1 | USES2 }, /* not rm,rn */ | |
| { 0x6008, SETS1 | USES2 }, /* swap.b rm,rn */ | |
| { 0x6009, SETS1 | USES2 }, /* swap.w rm,rn */ | |
| { 0x600a, SETS1 | SETSSP | USES2 | USESSP }, /* negc rm,rn */ | |
| { 0x600b, SETS1 | USES2 }, /* neg rm,rn */ | |
| { 0x600c, SETS1 | USES2 }, /* extu.b rm,rn */ | |
| { 0x600d, SETS1 | USES2 }, /* extu.w rm,rn */ | |
| { 0x600e, SETS1 | USES2 }, /* exts.b rm,rn */ | |
| { 0x600f, SETS1 | USES2 } /* exts.w rm,rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode6[] = | |
| { | |
| { MAP (sh_opcode60), 0xf00f } | |
| }; | |
| static const struct sh_opcode sh_opcode70[] = | |
| { | |
| { 0x7000, SETS1 | USES1 } /* add #imm,rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode7[] = | |
| { | |
| { MAP (sh_opcode70), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcode80[] = | |
| { | |
| { 0x8000, STORE | USES2 | USESR0 }, /* mov.b r0,@(disp,rn) */ | |
| { 0x8100, STORE | USES2 | USESR0 }, /* mov.w r0,@(disp,rn) */ | |
| { 0x8200, SETSSP }, /* setrc #imm */ | |
| { 0x8400, LOAD | SETSR0 | USES2 }, /* mov.b @(disp,rm),r0 */ | |
| { 0x8500, LOAD | SETSR0 | USES2 }, /* mov.w @(disp,rn),r0 */ | |
| { 0x8800, SETSSP | USESR0 }, /* cmp/eq #imm,r0 */ | |
| { 0x8900, BRANCH | USESSP }, /* bt label */ | |
| { 0x8b00, BRANCH | USESSP }, /* bf label */ | |
| { 0x8c00, SETSSP }, /* ldrs @(disp,pc) */ | |
| { 0x8d00, BRANCH | DELAY | USESSP }, /* bt/s label */ | |
| { 0x8e00, SETSSP }, /* ldre @(disp,pc) */ | |
| { 0x8f00, BRANCH | DELAY | USESSP } /* bf/s label */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode8[] = | |
| { | |
| { MAP (sh_opcode80), 0xff00 } | |
| }; | |
| static const struct sh_opcode sh_opcode90[] = | |
| { | |
| { 0x9000, LOAD | SETS1 } /* mov.w @(disp,pc),rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcode9[] = | |
| { | |
| { MAP (sh_opcode90), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcodea0[] = | |
| { | |
| { 0xa000, BRANCH | DELAY } /* bra label */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcodea[] = | |
| { | |
| { MAP (sh_opcodea0), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcodeb0[] = | |
| { | |
| { 0xb000, BRANCH | DELAY } /* bsr label */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcodeb[] = | |
| { | |
| { MAP (sh_opcodeb0), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcodec0[] = | |
| { | |
| { 0xc000, STORE | USESR0 | USESSP }, /* mov.b r0,@(disp,gbr) */ | |
| { 0xc100, STORE | USESR0 | USESSP }, /* mov.w r0,@(disp,gbr) */ | |
| { 0xc200, STORE | USESR0 | USESSP }, /* mov.l r0,@(disp,gbr) */ | |
| { 0xc300, BRANCH | USESSP }, /* trapa #imm */ | |
| { 0xc400, LOAD | SETSR0 | USESSP }, /* mov.b @(disp,gbr),r0 */ | |
| { 0xc500, LOAD | SETSR0 | USESSP }, /* mov.w @(disp,gbr),r0 */ | |
| { 0xc600, LOAD | SETSR0 | USESSP }, /* mov.l @(disp,gbr),r0 */ | |
| { 0xc700, SETSR0 }, /* mova @(disp,pc),r0 */ | |
| { 0xc800, SETSSP | USESR0 }, /* tst #imm,r0 */ | |
| { 0xc900, SETSR0 | USESR0 }, /* and #imm,r0 */ | |
| { 0xca00, SETSR0 | USESR0 }, /* xor #imm,r0 */ | |
| { 0xcb00, SETSR0 | USESR0 }, /* or #imm,r0 */ | |
| { 0xcc00, LOAD | SETSSP | USESR0 | USESSP }, /* tst.b #imm,@(r0,gbr) */ | |
| { 0xcd00, LOAD | STORE | USESR0 | USESSP }, /* and.b #imm,@(r0,gbr) */ | |
| { 0xce00, LOAD | STORE | USESR0 | USESSP }, /* xor.b #imm,@(r0,gbr) */ | |
| { 0xcf00, LOAD | STORE | USESR0 | USESSP } /* or.b #imm,@(r0,gbr) */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcodec[] = | |
| { | |
| { MAP (sh_opcodec0), 0xff00 } | |
| }; | |
| static const struct sh_opcode sh_opcoded0[] = | |
| { | |
| { 0xd000, LOAD | SETS1 } /* mov.l @(disp,pc),rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcoded[] = | |
| { | |
| { MAP (sh_opcoded0), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcodee0[] = | |
| { | |
| { 0xe000, SETS1 } /* mov #imm,rn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcodee[] = | |
| { | |
| { MAP (sh_opcodee0), 0xf000 } | |
| }; | |
| static const struct sh_opcode sh_opcodef0[] = | |
| { | |
| { 0xf000, SETSF1 | USESF1 | USESF2 }, /* fadd fm,fn */ | |
| { 0xf001, SETSF1 | USESF1 | USESF2 }, /* fsub fm,fn */ | |
| { 0xf002, SETSF1 | USESF1 | USESF2 }, /* fmul fm,fn */ | |
| { 0xf003, SETSF1 | USESF1 | USESF2 }, /* fdiv fm,fn */ | |
| { 0xf004, SETSSP | USESF1 | USESF2 }, /* fcmp/eq fm,fn */ | |
| { 0xf005, SETSSP | USESF1 | USESF2 }, /* fcmp/gt fm,fn */ | |
| { 0xf006, LOAD | SETSF1 | USES2 | USESR0 }, /* fmov.s @(r0,rm),fn */ | |
| { 0xf007, STORE | USES1 | USESF2 | USESR0 }, /* fmov.s fm,@(r0,rn) */ | |
| { 0xf008, LOAD | SETSF1 | USES2 }, /* fmov.s @rm,fn */ | |
| { 0xf009, LOAD | SETS2 | SETSF1 | USES2 }, /* fmov.s @rm+,fn */ | |
| { 0xf00a, STORE | USES1 | USESF2 }, /* fmov.s fm,@rn */ | |
| { 0xf00b, STORE | SETS1 | USES1 | USESF2 }, /* fmov.s fm,@-rn */ | |
| { 0xf00c, SETSF1 | USESF2 }, /* fmov fm,fn */ | |
| { 0xf00e, SETSF1 | USESF1 | USESF2 | USESF0 } /* fmac f0,fm,fn */ | |
| }; | |
| static const struct sh_opcode sh_opcodef1[] = | |
| { | |
| { 0xf00d, SETSF1 | USESSP }, /* fsts fpul,fn */ | |
| { 0xf01d, SETSSP | USESF1 }, /* flds fn,fpul */ | |
| { 0xf02d, SETSF1 | USESSP }, /* float fpul,fn */ | |
| { 0xf03d, SETSSP | USESF1 }, /* ftrc fn,fpul */ | |
| { 0xf04d, SETSF1 | USESF1 }, /* fneg fn */ | |
| { 0xf05d, SETSF1 | USESF1 }, /* fabs fn */ | |
| { 0xf06d, SETSF1 | USESF1 }, /* fsqrt fn */ | |
| { 0xf07d, SETSSP | USESF1 }, /* ftst/nan fn */ | |
| { 0xf08d, SETSF1 }, /* fldi0 fn */ | |
| { 0xf09d, SETSF1 } /* fldi1 fn */ | |
| }; | |
| static const struct sh_minor_opcode sh_opcodef[] = | |
| { | |
| { MAP (sh_opcodef0), 0xf00f }, | |
| { MAP (sh_opcodef1), 0xf0ff } | |
| }; | |
| static struct sh_major_opcode sh_opcodes[] = | |
| { | |
| { MAP (sh_opcode0) }, | |
| { MAP (sh_opcode1) }, | |
| { MAP (sh_opcode2) }, | |
| { MAP (sh_opcode3) }, | |
| { MAP (sh_opcode4) }, | |
| { MAP (sh_opcode5) }, | |
| { MAP (sh_opcode6) }, | |
| { MAP (sh_opcode7) }, | |
| { MAP (sh_opcode8) }, | |
| { MAP (sh_opcode9) }, | |
| { MAP (sh_opcodea) }, | |
| { MAP (sh_opcodeb) }, | |
| { MAP (sh_opcodec) }, | |
| { MAP (sh_opcoded) }, | |
| { MAP (sh_opcodee) }, | |
| { MAP (sh_opcodef) } | |
| }; | |
| /* The double data transfer / parallel processing insns are not | |
| described here. This will cause sh_align_load_span to leave them alone. */ | |
| static const struct sh_opcode sh_dsp_opcodef0[] = | |
| { | |
| { 0xf400, USESAS | SETSAS | LOAD | SETSSP }, /* movs.x @-as,ds */ | |
| { 0xf401, USESAS | SETSAS | STORE | USESSP }, /* movs.x ds,@-as */ | |
| { 0xf404, USESAS | LOAD | SETSSP }, /* movs.x @as,ds */ | |
| { 0xf405, USESAS | STORE | USESSP }, /* movs.x ds,@as */ | |
| { 0xf408, USESAS | SETSAS | LOAD | SETSSP }, /* movs.x @as+,ds */ | |
| { 0xf409, USESAS | SETSAS | STORE | USESSP }, /* movs.x ds,@as+ */ | |
| { 0xf40c, USESAS | SETSAS | LOAD | SETSSP | USESR8 }, /* movs.x @as+r8,ds */ | |
| { 0xf40d, USESAS | SETSAS | STORE | USESSP | USESR8 } /* movs.x ds,@as+r8 */ | |
| }; | |
| static const struct sh_minor_opcode sh_dsp_opcodef[] = | |
| { | |
| { MAP (sh_dsp_opcodef0), 0xfc0d } | |
| }; | |
| /* Given an instruction, return a pointer to the corresponding | |
| sh_opcode structure. Return NULL if the instruction is not | |
| recognized. */ | |
| static const struct sh_opcode * | |
| sh_insn_info (insn) | |
| unsigned int insn; | |
| { | |
| const struct sh_major_opcode *maj; | |
| const struct sh_minor_opcode *min, *minend; | |
| maj = &sh_opcodes[(insn & 0xf000) >> 12]; | |
| min = maj->minor_opcodes; | |
| minend = min + maj->count; | |
| for (; min < minend; min++) | |
| { | |
| unsigned int l; | |
| const struct sh_opcode *op, *opend; | |
| l = insn & min->mask; | |
| op = min->opcodes; | |
| opend = op + min->count; | |
| /* Since the opcodes tables are sorted, we could use a binary | |
| search here if the count were above some cutoff value. */ | |
| for (; op < opend; op++) | |
| if (op->opcode == l) | |
| return op; | |
| } | |
| return NULL; | |
| } | |
| /* See whether an instruction uses or sets a general purpose register */ | |
| static bfd_boolean | |
| sh_insn_uses_or_sets_reg (insn, op, reg) | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int reg; | |
| { | |
| if (sh_insn_uses_reg (insn, op, reg)) | |
| return TRUE; | |
| return sh_insn_sets_reg (insn, op, reg); | |
| } | |
| /* See whether an instruction uses a general purpose register. */ | |
| static bfd_boolean | |
| sh_insn_uses_reg (insn, op, reg) | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int reg; | |
| { | |
| unsigned int f; | |
| f = op->flags; | |
| if ((f & USES1) != 0 | |
| && USES1_REG (insn) == reg) | |
| return TRUE; | |
| if ((f & USES2) != 0 | |
| && USES2_REG (insn) == reg) | |
| return TRUE; | |
| if ((f & USESR0) != 0 | |
| && reg == 0) | |
| return TRUE; | |
| if ((f & USESAS) && reg == USESAS_REG (insn)) | |
| return TRUE; | |
| if ((f & USESR8) && reg == 8) | |
| return TRUE; | |
| return FALSE; | |
| } | |
| /* See whether an instruction sets a general purpose register. */ | |
| static bfd_boolean | |
| sh_insn_sets_reg (insn, op, reg) | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int reg; | |
| { | |
| unsigned int f; | |
| f = op->flags; | |
| if ((f & SETS1) != 0 | |
| && SETS1_REG (insn) == reg) | |
| return TRUE; | |
| if ((f & SETS2) != 0 | |
| && SETS2_REG (insn) == reg) | |
| return TRUE; | |
| if ((f & SETSR0) != 0 | |
| && reg == 0) | |
| return TRUE; | |
| if ((f & SETSAS) && reg == SETSAS_REG (insn)) | |
| return TRUE; | |
| return FALSE; | |
| } | |
| /* See whether an instruction uses or sets a floating point register */ | |
| static bfd_boolean | |
| sh_insn_uses_or_sets_freg (insn, op, reg) | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int reg; | |
| { | |
| if (sh_insn_uses_freg (insn, op, reg)) | |
| return TRUE; | |
| return sh_insn_sets_freg (insn, op, reg); | |
| } | |
| /* See whether an instruction uses a floating point register. */ | |
| static bfd_boolean | |
| sh_insn_uses_freg (insn, op, freg) | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int freg; | |
| { | |
| unsigned int f; | |
| f = op->flags; | |
| /* We can't tell if this is a double-precision insn, so just play safe | |
| and assume that it might be. So not only have we test FREG against | |
| itself, but also even FREG against FREG+1 - if the using insn uses | |
| just the low part of a double precision value - but also an odd | |
| FREG against FREG-1 - if the setting insn sets just the low part | |
| of a double precision value. | |
| So what this all boils down to is that we have to ignore the lowest | |
| bit of the register number. */ | |
| if ((f & USESF1) != 0 | |
| && (USESF1_REG (insn) & 0xe) == (freg & 0xe)) | |
| return TRUE; | |
| if ((f & USESF2) != 0 | |
| && (USESF2_REG (insn) & 0xe) == (freg & 0xe)) | |
| return TRUE; | |
| if ((f & USESF0) != 0 | |
| && freg == 0) | |
| return TRUE; | |
| return FALSE; | |
| } | |
| /* See whether an instruction sets a floating point register. */ | |
| static bfd_boolean | |
| sh_insn_sets_freg (insn, op, freg) | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int freg; | |
| { | |
| unsigned int f; | |
| f = op->flags; | |
| /* We can't tell if this is a double-precision insn, so just play safe | |
| and assume that it might be. So not only have we test FREG against | |
| itself, but also even FREG against FREG+1 - if the using insn uses | |
| just the low part of a double precision value - but also an odd | |
| FREG against FREG-1 - if the setting insn sets just the low part | |
| of a double precision value. | |
| So what this all boils down to is that we have to ignore the lowest | |
| bit of the register number. */ | |
| if ((f & SETSF1) != 0 | |
| && (SETSF1_REG (insn) & 0xe) == (freg & 0xe)) | |
| return TRUE; | |
| return FALSE; | |
| } | |
| /* See whether instructions I1 and I2 conflict, assuming I1 comes | |
| before I2. OP1 and OP2 are the corresponding sh_opcode structures. | |
| This should return TRUE if there is a conflict, or FALSE if the | |
| instructions can be swapped safely. */ | |
| static bfd_boolean | |
| sh_insns_conflict (i1, op1, i2, op2) | |
| unsigned int i1; | |
| const struct sh_opcode *op1; | |
| unsigned int i2; | |
| const struct sh_opcode *op2; | |
| { | |
| unsigned int f1, f2; | |
| f1 = op1->flags; | |
| f2 = op2->flags; | |
| /* Load of fpscr conflicts with floating point operations. | |
| FIXME: shouldn't test raw opcodes here. */ | |
| if (((i1 & 0xf0ff) == 0x4066 && (i2 & 0xf000) == 0xf000) | |
| || ((i2 & 0xf0ff) == 0x4066 && (i1 & 0xf000) == 0xf000)) | |
| return TRUE; | |
| if ((f1 & (BRANCH | DELAY)) != 0 | |
| || (f2 & (BRANCH | DELAY)) != 0) | |
| return TRUE; | |
| if (((f1 | f2) & SETSSP) | |
| && (f1 & (SETSSP | USESSP)) | |
| && (f2 & (SETSSP | USESSP))) | |
| return TRUE; | |
| if ((f1 & SETS1) != 0 | |
| && sh_insn_uses_or_sets_reg (i2, op2, SETS1_REG (i1))) | |
| return TRUE; | |
| if ((f1 & SETS2) != 0 | |
| && sh_insn_uses_or_sets_reg (i2, op2, SETS2_REG (i1))) | |
| return TRUE; | |
| if ((f1 & SETSR0) != 0 | |
| && sh_insn_uses_or_sets_reg (i2, op2, 0)) | |
| return TRUE; | |
| if ((f1 & SETSAS) | |
| && sh_insn_uses_or_sets_reg (i2, op2, SETSAS_REG (i1))) | |
| return TRUE; | |
| if ((f1 & SETSF1) != 0 | |
| && sh_insn_uses_or_sets_freg (i2, op2, SETSF1_REG (i1))) | |
| return TRUE; | |
| if ((f2 & SETS1) != 0 | |
| && sh_insn_uses_or_sets_reg (i1, op1, SETS1_REG (i2))) | |
| return TRUE; | |
| if ((f2 & SETS2) != 0 | |
| && sh_insn_uses_or_sets_reg (i1, op1, SETS2_REG (i2))) | |
| return TRUE; | |
| if ((f2 & SETSR0) != 0 | |
| && sh_insn_uses_or_sets_reg (i1, op1, 0)) | |
| return TRUE; | |
| if ((f2 & SETSAS) | |
| && sh_insn_uses_or_sets_reg (i1, op1, SETSAS_REG (i2))) | |
| return TRUE; | |
| if ((f2 & SETSF1) != 0 | |
| && sh_insn_uses_or_sets_freg (i1, op1, SETSF1_REG (i2))) | |
| return TRUE; | |
| /* The instructions do not conflict. */ | |
| return FALSE; | |
| } | |
| /* I1 is a load instruction, and I2 is some other instruction. Return | |
| TRUE if I1 loads a register which I2 uses. */ | |
| static bfd_boolean | |
| sh_load_use (i1, op1, i2, op2) | |
| unsigned int i1; | |
| const struct sh_opcode *op1; | |
| unsigned int i2; | |
| const struct sh_opcode *op2; | |
| { | |
| unsigned int f1; | |
| f1 = op1->flags; | |
| if ((f1 & LOAD) == 0) | |
| return FALSE; | |
| /* If both SETS1 and SETSSP are set, that means a load to a special | |
| register using postincrement addressing mode, which we don't care | |
| about here. */ | |
| if ((f1 & SETS1) != 0 | |
| && (f1 & SETSSP) == 0 | |
| && sh_insn_uses_reg (i2, op2, (i1 & 0x0f00) >> 8)) | |
| return TRUE; | |
| if ((f1 & SETSR0) != 0 | |
| && sh_insn_uses_reg (i2, op2, 0)) | |
| return TRUE; | |
| if ((f1 & SETSF1) != 0 | |
| && sh_insn_uses_freg (i2, op2, (i1 & 0x0f00) >> 8)) | |
| return TRUE; | |
| return FALSE; | |
| } | |
| /* Try to align loads and stores within a span of memory. This is | |
| called by both the ELF and the COFF sh targets. ABFD and SEC are | |
| the BFD and section we are examining. CONTENTS is the contents of | |
| the section. SWAP is the routine to call to swap two instructions. | |
| RELOCS is a pointer to the internal relocation information, to be | |
| passed to SWAP. PLABEL is a pointer to the current label in a | |
| sorted list of labels; LABEL_END is the end of the list. START and | |
| STOP are the range of memory to examine. If a swap is made, | |
| *PSWAPPED is set to TRUE. */ | |
| #ifdef COFF_WITH_PE | |
| static | |
| #endif | |
| bfd_boolean | |
| _bfd_sh_align_load_span (abfd, sec, contents, swap, relocs, | |
| plabel, label_end, start, stop, pswapped) | |
| bfd *abfd; | |
| asection *sec; | |
| bfd_byte *contents; | |
| bfd_boolean (*swap) PARAMS ((bfd *, asection *, PTR, bfd_byte *, bfd_vma)); | |
| PTR relocs; | |
| bfd_vma **plabel; | |
| bfd_vma *label_end; | |
| bfd_vma start; | |
| bfd_vma stop; | |
| bfd_boolean *pswapped; | |
| { | |
| int dsp = (abfd->arch_info->mach == bfd_mach_sh_dsp | |
| || abfd->arch_info->mach == bfd_mach_sh3_dsp); | |
| bfd_vma i; | |
| /* The SH4 has a Harvard architecture, hence aligning loads is not | |
| desirable. In fact, it is counter-productive, since it interferes | |
| with the schedules generated by the compiler. */ | |
| if (abfd->arch_info->mach == bfd_mach_sh4) | |
| return TRUE; | |
| /* If we are linking sh[3]-dsp code, swap the FPU instructions for DSP | |
| instructions. */ | |
| if (dsp) | |
| { | |
| sh_opcodes[0xf].minor_opcodes = sh_dsp_opcodef; | |
| sh_opcodes[0xf].count = sizeof sh_dsp_opcodef / sizeof sh_dsp_opcodef; | |
| } | |
| /* Instructions should be aligned on 2 byte boundaries. */ | |
| if ((start & 1) == 1) | |
| ++start; | |
| /* Now look through the unaligned addresses. */ | |
| i = start; | |
| if ((i & 2) == 0) | |
| i += 2; | |
| for (; i < stop; i += 4) | |
| { | |
| unsigned int insn; | |
| const struct sh_opcode *op; | |
| unsigned int prev_insn = 0; | |
| const struct sh_opcode *prev_op = NULL; | |
| insn = bfd_get_16 (abfd, contents + i); | |
| op = sh_insn_info (insn); | |
| if (op == NULL | |
| || (op->flags & (LOAD | STORE)) == 0) | |
| continue; | |
| /* This is a load or store which is not on a four byte boundary. */ | |
| while (*plabel < label_end && **plabel < i) | |
| ++*plabel; | |
| if (i > start) | |
| { | |
| prev_insn = bfd_get_16 (abfd, contents + i - 2); | |
| /* If INSN is the field b of a parallel processing insn, it is not | |
| a load / store after all. Note that the test here might mistake | |
| the field_b of a pcopy insn for the starting code of a parallel | |
| processing insn; this might miss a swapping opportunity, but at | |
| least we're on the safe side. */ | |
| if (dsp && (prev_insn & 0xfc00) == 0xf800) | |
| continue; | |
| /* Check if prev_insn is actually the field b of a parallel | |
| processing insn. Again, this can give a spurious match | |
| after a pcopy. */ | |
| if (dsp && i - 2 > start) | |
| { | |
| unsigned pprev_insn = bfd_get_16 (abfd, contents + i - 4); | |
| if ((pprev_insn & 0xfc00) == 0xf800) | |
| prev_op = NULL; | |
| else | |
| prev_op = sh_insn_info (prev_insn); | |
| } | |
| else | |
| prev_op = sh_insn_info (prev_insn); | |
| /* If the load/store instruction is in a delay slot, we | |
| can't swap. */ | |
| if (prev_op == NULL | |
| || (prev_op->flags & DELAY) != 0) | |
| continue; | |
| } | |
| if (i > start | |
| && (*plabel >= label_end || **plabel != i) | |
| && prev_op != NULL | |
| && (prev_op->flags & (LOAD | STORE)) == 0 | |
| && ! sh_insns_conflict (prev_insn, prev_op, insn, op)) | |
| { | |
| bfd_boolean ok; | |
| /* The load/store instruction does not have a label, and | |
| there is a previous instruction; PREV_INSN is not | |
| itself a load/store instruction, and PREV_INSN and | |
| INSN do not conflict. */ | |
| ok = TRUE; | |
| if (i >= start + 4) | |
| { | |
| unsigned int prev2_insn; | |
| const struct sh_opcode *prev2_op; | |
| prev2_insn = bfd_get_16 (abfd, contents + i - 4); | |
| prev2_op = sh_insn_info (prev2_insn); | |
| /* If the instruction before PREV_INSN has a delay | |
| slot--that is, PREV_INSN is in a delay slot--we | |
| can not swap. */ | |
| if (prev2_op == NULL | |
| || (prev2_op->flags & DELAY) != 0) | |
| ok = FALSE; | |
| /* If the instruction before PREV_INSN is a load, | |
| and it sets a register which INSN uses, then | |
| putting INSN immediately after PREV_INSN will | |
| cause a pipeline bubble, so there is no point to | |
| making the swap. */ | |
| if (ok | |
| && (prev2_op->flags & LOAD) != 0 | |
| && sh_load_use (prev2_insn, prev2_op, insn, op)) | |
| ok = FALSE; | |
| } | |
| if (ok) | |
| { | |
| if (! (*swap) (abfd, sec, relocs, contents, i - 2)) | |
| return FALSE; | |
| *pswapped = TRUE; | |
| continue; | |
| } | |
| } | |
| while (*plabel < label_end && **plabel < i + 2) | |
| ++*plabel; | |
| if (i + 2 < stop | |
| && (*plabel >= label_end || **plabel != i + 2)) | |
| { | |
| unsigned int next_insn; | |
| const struct sh_opcode *next_op; | |
| /* There is an instruction after the load/store | |
| instruction, and it does not have a label. */ | |
| next_insn = bfd_get_16 (abfd, contents + i + 2); | |
| next_op = sh_insn_info (next_insn); | |
| if (next_op != NULL | |
| && (next_op->flags & (LOAD | STORE)) == 0 | |
| && ! sh_insns_conflict (insn, op, next_insn, next_op)) | |
| { | |
| bfd_boolean ok; | |
| /* NEXT_INSN is not itself a load/store instruction, | |
| and it does not conflict with INSN. */ | |
| ok = TRUE; | |
| /* If PREV_INSN is a load, and it sets a register | |
| which NEXT_INSN uses, then putting NEXT_INSN | |
| immediately after PREV_INSN will cause a pipeline | |
| bubble, so there is no reason to make this swap. */ | |
| if (prev_op != NULL | |
| && (prev_op->flags & LOAD) != 0 | |
| && sh_load_use (prev_insn, prev_op, next_insn, next_op)) | |
| ok = FALSE; | |
| /* If INSN is a load, and it sets a register which | |
| the insn after NEXT_INSN uses, then doing the | |
| swap will cause a pipeline bubble, so there is no | |
| reason to make the swap. However, if the insn | |
| after NEXT_INSN is itself a load or store | |
| instruction, then it is misaligned, so | |
| optimistically hope that it will be swapped | |
| itself, and just live with the pipeline bubble if | |
| it isn't. */ | |
| if (ok | |
| && i + 4 < stop | |
| && (op->flags & LOAD) != 0) | |
| { | |
| unsigned int next2_insn; | |
| const struct sh_opcode *next2_op; | |
| next2_insn = bfd_get_16 (abfd, contents + i + 4); | |
| next2_op = sh_insn_info (next2_insn); | |
| if (next2_op == NULL | |
| || ((next2_op->flags & (LOAD | STORE)) == 0 | |
| && sh_load_use (insn, op, next2_insn, next2_op))) | |
| ok = FALSE; | |
| } | |
| if (ok) | |
| { | |
| if (! (*swap) (abfd, sec, relocs, contents, i)) | |
| return FALSE; | |
| *pswapped = TRUE; | |
| continue; | |
| } | |
| } | |
| } | |
| } | |
| return TRUE; | |
| } | |
| #endif /* not COFF_IMAGE_WITH_PE */ | |
| /* Look for loads and stores which we can align to four byte | |
| boundaries. See the longer comment above sh_relax_section for why | |
| this is desirable. This sets *PSWAPPED if some instruction was | |
| swapped. */ | |
| static bfd_boolean | |
| sh_align_loads (abfd, sec, internal_relocs, contents, pswapped) | |
| bfd *abfd; | |
| asection *sec; | |
| struct internal_reloc *internal_relocs; | |
| bfd_byte *contents; | |
| bfd_boolean *pswapped; | |
| { | |
| struct internal_reloc *irel, *irelend; | |
| bfd_vma *labels = NULL; | |
| bfd_vma *label, *label_end; | |
| bfd_size_type amt; | |
| *pswapped = FALSE; | |
| irelend = internal_relocs + sec->reloc_count; | |
| /* Get all the addresses with labels on them. */ | |
| amt = (bfd_size_type) sec->reloc_count * sizeof (bfd_vma); | |
| labels = (bfd_vma *) bfd_malloc (amt); | |
| if (labels == NULL) | |
| goto error_return; | |
| label_end = labels; | |
| for (irel = internal_relocs; irel < irelend; irel++) | |
| { | |
| if (irel->r_type == R_SH_LABEL) | |
| { | |
| *label_end = irel->r_vaddr - sec->vma; | |
| ++label_end; | |
| } | |
| } | |
| /* Note that the assembler currently always outputs relocs in | |
| address order. If that ever changes, this code will need to sort | |
| the label values and the relocs. */ | |
| label = labels; | |
| for (irel = internal_relocs; irel < irelend; irel++) | |
| { | |
| bfd_vma start, stop; | |
| if (irel->r_type != R_SH_CODE) | |
| continue; | |
| start = irel->r_vaddr - sec->vma; | |
| for (irel++; irel < irelend; irel++) | |
| if (irel->r_type == R_SH_DATA) | |
| break; | |
| if (irel < irelend) | |
| stop = irel->r_vaddr - sec->vma; | |
| else | |
| stop = sec->size; | |
| if (! _bfd_sh_align_load_span (abfd, sec, contents, sh_swap_insns, | |
| (PTR) internal_relocs, &label, | |
| label_end, start, stop, pswapped)) | |
| goto error_return; | |
| } | |
| free (labels); | |
| return TRUE; | |
| error_return: | |
| if (labels != NULL) | |
| free (labels); | |
| return FALSE; | |
| } | |
| /* Swap two SH instructions. */ | |
| static bfd_boolean | |
| sh_swap_insns (abfd, sec, relocs, contents, addr) | |
| bfd *abfd; | |
| asection *sec; | |
| PTR relocs; | |
| bfd_byte *contents; | |
| bfd_vma addr; | |
| { | |
| struct internal_reloc *internal_relocs = (struct internal_reloc *) relocs; | |
| unsigned short i1, i2; | |
| struct internal_reloc *irel, *irelend; | |
| /* Swap the instructions themselves. */ | |
| i1 = bfd_get_16 (abfd, contents + addr); | |
| i2 = bfd_get_16 (abfd, contents + addr + 2); | |
| bfd_put_16 (abfd, (bfd_vma) i2, contents + addr); | |
| bfd_put_16 (abfd, (bfd_vma) i1, contents + addr + 2); | |
| /* Adjust all reloc addresses. */ | |
| irelend = internal_relocs + sec->reloc_count; | |
| for (irel = internal_relocs; irel < irelend; irel++) | |
| { | |
| int type, add; | |
| /* There are a few special types of relocs that we don't want to | |
| adjust. These relocs do not apply to the instruction itself, | |
| but are only associated with the address. */ | |
| type = irel->r_type; | |
| if (type == R_SH_ALIGN | |
| || type == R_SH_CODE | |
| || type == R_SH_DATA | |
| || type == R_SH_LABEL) | |
| continue; | |
| /* If an R_SH_USES reloc points to one of the addresses being | |
| swapped, we must adjust it. It would be incorrect to do this | |
| for a jump, though, since we want to execute both | |
| instructions after the jump. (We have avoided swapping | |
| around a label, so the jump will not wind up executing an | |
| instruction it shouldn't). */ | |
| if (type == R_SH_USES) | |
| { | |
| bfd_vma off; | |
| off = irel->r_vaddr - sec->vma + 4 + irel->r_offset; | |
| if (off == addr) | |
| irel->r_offset += 2; | |
| else if (off == addr + 2) | |
| irel->r_offset -= 2; | |
| } | |
| if (irel->r_vaddr - sec->vma == addr) | |
| { | |
| irel->r_vaddr += 2; | |
| add = -2; | |
| } | |
| else if (irel->r_vaddr - sec->vma == addr + 2) | |
| { | |
| irel->r_vaddr -= 2; | |
| add = 2; | |
| } | |
| else | |
| add = 0; | |
| if (add != 0) | |
| { | |
| bfd_byte *loc; | |
| unsigned short insn, oinsn; | |
| bfd_boolean overflow; | |
| loc = contents + irel->r_vaddr - sec->vma; | |
| overflow = FALSE; | |
| switch (type) | |
| { | |
| default: | |
| break; | |
| case R_SH_PCDISP8BY2: | |
| case R_SH_PCRELIMM8BY2: | |
| insn = bfd_get_16 (abfd, loc); | |
| oinsn = insn; | |
| insn += add / 2; | |
| if ((oinsn & 0xff00) != (insn & 0xff00)) | |
| overflow = TRUE; | |
| bfd_put_16 (abfd, (bfd_vma) insn, loc); | |
| break; | |
| case R_SH_PCDISP: | |
| insn = bfd_get_16 (abfd, loc); | |
| oinsn = insn; | |
| insn += add / 2; | |
| if ((oinsn & 0xf000) != (insn & 0xf000)) | |
| overflow = TRUE; | |
| bfd_put_16 (abfd, (bfd_vma) insn, loc); | |
| break; | |
| case R_SH_PCRELIMM8BY4: | |
| /* This reloc ignores the least significant 3 bits of | |
| the program counter before adding in the offset. | |
| This means that if ADDR is at an even address, the | |
| swap will not affect the offset. If ADDR is an at an | |
| odd address, then the instruction will be crossing a | |
| four byte boundary, and must be adjusted. */ | |
| if ((addr & 3) != 0) | |
| { | |
| insn = bfd_get_16 (abfd, loc); | |
| oinsn = insn; | |
| insn += add / 2; | |
| if ((oinsn & 0xff00) != (insn & 0xff00)) | |
| overflow = TRUE; | |
| bfd_put_16 (abfd, (bfd_vma) insn, loc); | |
| } | |
| break; | |
| } | |
| if (overflow) | |
| { | |
| ((*_bfd_error_handler) | |
| ("%B: 0x%lx: fatal: reloc overflow while relaxing", | |
| abfd, (unsigned long) irel->r_vaddr)); | |
| bfd_set_error (bfd_error_bad_value); | |
| return FALSE; | |
| } | |
| } | |
| } | |
| return TRUE; | |
| } | |
| /* This is a modification of _bfd_coff_generic_relocate_section, which | |
| will handle SH relaxing. */ | |
| static bfd_boolean | |
| sh_relocate_section (output_bfd, info, input_bfd, input_section, contents, | |
| relocs, syms, sections) | |
| bfd *output_bfd ATTRIBUTE_UNUSED; | |
| struct bfd_link_info *info; | |
| bfd *input_bfd; | |
| asection *input_section; | |
| bfd_byte *contents; | |
| struct internal_reloc *relocs; | |
| struct internal_syment *syms; | |
| asection **sections; | |
| { | |
| struct internal_reloc *rel; | |
| struct internal_reloc *relend; | |
| rel = relocs; | |
| relend = rel + input_section->reloc_count; | |
| for (; rel < relend; rel++) | |
| { | |
| long symndx; | |
| struct coff_link_hash_entry *h; | |
| struct internal_syment *sym; | |
| bfd_vma addend; | |
| bfd_vma val; | |
| reloc_howto_type *howto; | |
| bfd_reloc_status_type rstat; | |
| /* Almost all relocs have to do with relaxing. If any work must | |
| be done for them, it has been done in sh_relax_section. */ | |
| if (rel->r_type != R_SH_IMM32 | |
| #ifdef COFF_WITH_PE | |
| && rel->r_type != R_SH_IMM32CE | |
| && rel->r_type != R_SH_IMAGEBASE | |
| #endif | |
| && rel->r_type != R_SH_PCDISP) | |
| continue; | |
| symndx = rel->r_symndx; | |
| if (symndx == -1) | |
| { | |
| h = NULL; | |
| sym = NULL; | |
| } | |
| else | |
| { | |
| if (symndx < 0 | |
| || (unsigned long) symndx >= obj_raw_syment_count (input_bfd)) | |
| { | |
| (*_bfd_error_handler) | |
| ("%B: illegal symbol index %ld in relocs", | |
| input_bfd, symndx); | |
| bfd_set_error (bfd_error_bad_value); | |
| return FALSE; | |
| } | |
| h = obj_coff_sym_hashes (input_bfd)[symndx]; | |
| sym = syms + symndx; | |
| } | |
| if (sym != NULL && sym->n_scnum != 0) | |
| addend = - sym->n_value; | |
| else | |
| addend = 0; | |
| if (rel->r_type == R_SH_PCDISP) | |
| addend -= 4; | |
| if (rel->r_type >= SH_COFF_HOWTO_COUNT) | |
| howto = NULL; | |
| else | |
| howto = &sh_coff_howtos[rel->r_type]; | |
| if (howto == NULL) | |
| { | |
| bfd_set_error (bfd_error_bad_value); | |
| return FALSE; | |
| } | |
| #ifdef COFF_WITH_PE | |
| if (rel->r_type == R_SH_IMAGEBASE) | |
| addend -= pe_data (input_section->output_section->owner)->pe_opthdr.ImageBase; | |
| #endif | |
| val = 0; | |
| if (h == NULL) | |
| { | |
| asection *sec; | |
| /* There is nothing to do for an internal PCDISP reloc. */ | |
| if (rel->r_type == R_SH_PCDISP) | |
| continue; | |
| if (symndx == -1) | |
| { | |
| sec = bfd_abs_section_ptr; | |
| val = 0; | |
| } | |
| else | |
| { | |
| sec = sections[symndx]; | |
| val = (sec->output_section->vma | |
| + sec->output_offset | |
| + sym->n_value | |
| - sec->vma); | |
| } | |
| } | |
| else | |
| { | |
| if (h->root.type == bfd_link_hash_defined | |
| || h->root.type == bfd_link_hash_defweak) | |
| { | |
| asection *sec; | |
| sec = h->root.u.def.section; | |
| val = (h->root.u.def.value | |
| + sec->output_section->vma | |
| + sec->output_offset); | |
| } | |
| else if (! info->relocatable) | |
| { | |
| if (! ((*info->callbacks->undefined_symbol) | |
| (info, h->root.root.string, input_bfd, input_section, | |
| rel->r_vaddr - input_section->vma, TRUE))) | |
| return FALSE; | |
| } | |
| } | |
| rstat = _bfd_final_link_relocate (howto, input_bfd, input_section, | |
| contents, | |
| rel->r_vaddr - input_section->vma, | |
| val, addend); | |
| switch (rstat) | |
| { | |
| default: | |
| abort (); | |
| case bfd_reloc_ok: | |
| break; | |
| case bfd_reloc_overflow: | |
| { | |
| const char *name; | |
| char buf[SYMNMLEN + 1]; | |
| if (symndx == -1) | |
| name = "*ABS*"; | |
| else if (h != NULL) | |
| name = NULL; | |
| else if (sym->_n._n_n._n_zeroes == 0 | |
| && sym->_n._n_n._n_offset != 0) | |
| name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset; | |
| else | |
| { | |
| strncpy (buf, sym->_n._n_name, SYMNMLEN); | |
| buf[SYMNMLEN] = '\0'; | |
| name = buf; | |
| } | |
| if (! ((*info->callbacks->reloc_overflow) | |
| (info, (h ? &h->root : NULL), name, howto->name, | |
| (bfd_vma) 0, input_bfd, input_section, | |
| rel->r_vaddr - input_section->vma))) | |
| return FALSE; | |
| } | |
| } | |
| } | |
| return TRUE; | |
| } | |
| /* This is a version of bfd_generic_get_relocated_section_contents | |
| which uses sh_relocate_section. */ | |
| static bfd_byte * | |
| sh_coff_get_relocated_section_contents (output_bfd, link_info, link_order, | |
| data, relocatable, symbols) | |
| bfd *output_bfd; | |
| struct bfd_link_info *link_info; | |
| struct bfd_link_order *link_order; | |
| bfd_byte *data; | |
| bfd_boolean relocatable; | |
| asymbol **symbols; | |
| { | |
| asection *input_section = link_order->u.indirect.section; | |
| bfd *input_bfd = input_section->owner; | |
| asection **sections = NULL; | |
| struct internal_reloc *internal_relocs = NULL; | |
| struct internal_syment *internal_syms = NULL; | |
| /* We only need to handle the case of relaxing, or of having a | |
| particular set of section contents, specially. */ | |
| if (relocatable | |
| || coff_section_data (input_bfd, input_section) == NULL | |
| || coff_section_data (input_bfd, input_section)->contents == NULL) | |
| return bfd_generic_get_relocated_section_contents (output_bfd, link_info, | |
| link_order, data, | |
| relocatable, | |
| symbols); | |
| memcpy (data, coff_section_data (input_bfd, input_section)->contents, | |
| (size_t) input_section->size); | |
| if ((input_section->flags & SEC_RELOC) != 0 | |
| && input_section->reloc_count > 0) | |
| { | |
| bfd_size_type symesz = bfd_coff_symesz (input_bfd); | |
| bfd_byte *esym, *esymend; | |
| struct internal_syment *isymp; | |
| asection **secpp; | |
| bfd_size_type amt; | |
| if (! _bfd_coff_get_external_symbols (input_bfd)) | |
| goto error_return; | |
| internal_relocs = (_bfd_coff_read_internal_relocs | |
| (input_bfd, input_section, FALSE, (bfd_byte *) NULL, | |
| FALSE, (struct internal_reloc *) NULL)); | |
| if (internal_relocs == NULL) | |
| goto error_return; | |
| amt = obj_raw_syment_count (input_bfd); | |
| amt *= sizeof (struct internal_syment); | |
| internal_syms = (struct internal_syment *) bfd_malloc (amt); | |
| if (internal_syms == NULL) | |
| goto error_return; | |
| amt = obj_raw_syment_count (input_bfd); | |
| amt *= sizeof (asection *); | |
| sections = (asection **) bfd_malloc (amt); | |
| if (sections == NULL) | |
| goto error_return; | |
| isymp = internal_syms; | |
| secpp = sections; | |
| esym = (bfd_byte *) obj_coff_external_syms (input_bfd); | |
| esymend = esym + obj_raw_syment_count (input_bfd) * symesz; | |
| while (esym < esymend) | |
| { | |
| bfd_coff_swap_sym_in (input_bfd, (PTR) esym, (PTR) isymp); | |
| if (isymp->n_scnum != 0) | |
| *secpp = coff_section_from_bfd_index (input_bfd, isymp->n_scnum); | |
| else | |
| { | |
| if (isymp->n_value == 0) | |
| *secpp = bfd_und_section_ptr; | |
| else | |
| *secpp = bfd_com_section_ptr; | |
| } | |
| esym += (isymp->n_numaux + 1) * symesz; | |
| secpp += isymp->n_numaux + 1; | |
| isymp += isymp->n_numaux + 1; | |
| } | |
| if (! sh_relocate_section (output_bfd, link_info, input_bfd, | |
| input_section, data, internal_relocs, | |
| internal_syms, sections)) | |
| goto error_return; | |
| free (sections); | |
| sections = NULL; | |
| free (internal_syms); | |
| internal_syms = NULL; | |
| free (internal_relocs); | |
| internal_relocs = NULL; | |
| } | |
| return data; | |
| error_return: | |
| if (internal_relocs != NULL) | |
| free (internal_relocs); | |
| if (internal_syms != NULL) | |
| free (internal_syms); | |
| if (sections != NULL) | |
| free (sections); | |
| return NULL; | |
| } | |
| /* The target vectors. */ | |
| #ifndef TARGET_SHL_SYM | |
| CREATE_BIG_COFF_TARGET_VEC (shcoff_vec, "coff-sh", BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE) | |
| #endif | |
| #ifdef TARGET_SHL_SYM | |
| #define TARGET_SYM TARGET_SHL_SYM | |
| #else | |
| #define TARGET_SYM shlcoff_vec | |
| #endif | |
| #ifndef TARGET_SHL_NAME | |
| #define TARGET_SHL_NAME "coff-shl" | |
| #endif | |
| #ifdef COFF_WITH_PE | |
| CREATE_LITTLE_COFF_TARGET_VEC (TARGET_SYM, TARGET_SHL_NAME, BFD_IS_RELAXABLE, | |
| SEC_CODE | SEC_DATA, '_', NULL, COFF_SWAP_TABLE); | |
| #else | |
| CREATE_LITTLE_COFF_TARGET_VEC (TARGET_SYM, TARGET_SHL_NAME, BFD_IS_RELAXABLE, | |
| 0, '_', NULL, COFF_SWAP_TABLE) | |
| #endif | |
| #ifndef TARGET_SHL_SYM | |
| static const bfd_target * coff_small_object_p PARAMS ((bfd *)); | |
| static bfd_boolean coff_small_new_section_hook PARAMS ((bfd *, asection *)); | |
| /* Some people want versions of the SH COFF target which do not align | |
| to 16 byte boundaries. We implement that by adding a couple of new | |
| target vectors. These are just like the ones above, but they | |
| change the default section alignment. To generate them in the | |
| assembler, use -small. To use them in the linker, use -b | |
| coff-sh{l}-small and -oformat coff-sh{l}-small. | |
| Yes, this is a horrible hack. A general solution for setting | |
| section alignment in COFF is rather complex. ELF handles this | |
| correctly. */ | |
| /* Only recognize the small versions if the target was not defaulted. | |
| Otherwise we won't recognize the non default endianness. */ | |
| static const bfd_target * | |
| coff_small_object_p (abfd) | |
| bfd *abfd; | |
| { | |
| if (abfd->target_defaulted) | |
| { | |
| bfd_set_error (bfd_error_wrong_format); | |
| return NULL; | |
| } | |
| return coff_object_p (abfd); | |
| } | |
| /* Set the section alignment for the small versions. */ | |
| static bfd_boolean | |
| coff_small_new_section_hook (abfd, section) | |
| bfd *abfd; | |
| asection *section; | |
| { | |
| if (! coff_new_section_hook (abfd, section)) | |
| return FALSE; | |
| /* We must align to at least a four byte boundary, because longword | |
| accesses must be on a four byte boundary. */ | |
| if (section->alignment_power == COFF_DEFAULT_SECTION_ALIGNMENT_POWER) | |
| section->alignment_power = 2; | |
| return TRUE; | |
| } | |
| /* This is copied from bfd_coff_std_swap_table so that we can change | |
| the default section alignment power. */ | |
| static const bfd_coff_backend_data bfd_coff_small_swap_table = | |
| { | |
| coff_swap_aux_in, coff_swap_sym_in, coff_swap_lineno_in, | |
| coff_swap_aux_out, coff_swap_sym_out, | |
| coff_swap_lineno_out, coff_swap_reloc_out, | |
| coff_swap_filehdr_out, coff_swap_aouthdr_out, | |
| coff_swap_scnhdr_out, | |
| FILHSZ, AOUTSZ, SCNHSZ, SYMESZ, AUXESZ, RELSZ, LINESZ, FILNMLEN, | |
| #ifdef COFF_LONG_FILENAMES | |
| TRUE, | |
| #else | |
| FALSE, | |
| #endif | |
| #ifdef COFF_LONG_SECTION_NAMES | |
| TRUE, | |
| #else | |
| FALSE, | |
| #endif | |
| 2, | |
| #ifdef COFF_FORCE_SYMBOLS_IN_STRINGS | |
| TRUE, | |
| #else | |
| FALSE, | |
| #endif | |
| #ifdef COFF_DEBUG_STRING_WIDE_PREFIX | |
| 4, | |
| #else | |
| 2, | |
| #endif | |
| coff_swap_filehdr_in, coff_swap_aouthdr_in, coff_swap_scnhdr_in, | |
| coff_swap_reloc_in, coff_bad_format_hook, coff_set_arch_mach_hook, | |
| coff_mkobject_hook, styp_to_sec_flags, coff_set_alignment_hook, | |
| coff_slurp_symbol_table, symname_in_debug_hook, coff_pointerize_aux_hook, | |
| coff_print_aux, coff_reloc16_extra_cases, coff_reloc16_estimate, | |
| coff_classify_symbol, coff_compute_section_file_positions, | |
| coff_start_final_link, coff_relocate_section, coff_rtype_to_howto, | |
| coff_adjust_symndx, coff_link_add_one_symbol, | |
| coff_link_output_has_begun, coff_final_link_postscript | |
| }; | |
| #define coff_small_close_and_cleanup \ | |
| coff_close_and_cleanup | |
| #define coff_small_bfd_free_cached_info \ | |
| coff_bfd_free_cached_info | |
| #define coff_small_get_section_contents \ | |
| coff_get_section_contents | |
| #define coff_small_get_section_contents_in_window \ | |
| coff_get_section_contents_in_window | |
| extern const bfd_target shlcoff_small_vec; | |
| const bfd_target shcoff_small_vec = | |
| { | |
| "coff-sh-small", /* name */ | |
| bfd_target_coff_flavour, | |
| BFD_ENDIAN_BIG, /* data byte order is big */ | |
| BFD_ENDIAN_BIG, /* header byte order is big */ | |
| (HAS_RELOC | EXEC_P | /* object flags */ | |
| HAS_LINENO | HAS_DEBUG | | |
| HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), | |
| (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), | |
| '_', /* leading symbol underscore */ | |
| '/', /* ar_pad_char */ | |
| 15, /* ar_max_namelen */ | |
| bfd_getb64, bfd_getb_signed_64, bfd_putb64, | |
| bfd_getb32, bfd_getb_signed_32, bfd_putb32, | |
| bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */ | |
| bfd_getb64, bfd_getb_signed_64, bfd_putb64, | |
| bfd_getb32, bfd_getb_signed_32, bfd_putb32, | |
| bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */ | |
| {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */ | |
| bfd_generic_archive_p, _bfd_dummy_target}, | |
| {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ | |
| bfd_false}, | |
| {bfd_false, coff_write_object_contents, /* bfd_write_contents */ | |
| _bfd_write_archive_contents, bfd_false}, | |
| BFD_JUMP_TABLE_GENERIC (coff_small), | |
| BFD_JUMP_TABLE_COPY (coff), | |
| BFD_JUMP_TABLE_CORE (_bfd_nocore), | |
| BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff), | |
| BFD_JUMP_TABLE_SYMBOLS (coff), | |
| BFD_JUMP_TABLE_RELOCS (coff), | |
| BFD_JUMP_TABLE_WRITE (coff), | |
| BFD_JUMP_TABLE_LINK (coff), | |
| BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), | |
| & shlcoff_small_vec, | |
| (PTR) &bfd_coff_small_swap_table | |
| }; | |
| const bfd_target shlcoff_small_vec = | |
| { | |
| "coff-shl-small", /* name */ | |
| bfd_target_coff_flavour, | |
| BFD_ENDIAN_LITTLE, /* data byte order is little */ | |
| BFD_ENDIAN_LITTLE, /* header byte order is little endian too*/ | |
| (HAS_RELOC | EXEC_P | /* object flags */ | |
| HAS_LINENO | HAS_DEBUG | | |
| HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), | |
| (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), | |
| '_', /* leading symbol underscore */ | |
| '/', /* ar_pad_char */ | |
| 15, /* ar_max_namelen */ | |
| bfd_getl64, bfd_getl_signed_64, bfd_putl64, | |
| bfd_getl32, bfd_getl_signed_32, bfd_putl32, | |
| bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */ | |
| bfd_getl64, bfd_getl_signed_64, bfd_putl64, | |
| bfd_getl32, bfd_getl_signed_32, bfd_putl32, | |
| bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */ | |
| {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */ | |
| bfd_generic_archive_p, _bfd_dummy_target}, | |
| {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ | |
| bfd_false}, | |
| {bfd_false, coff_write_object_contents, /* bfd_write_contents */ | |
| _bfd_write_archive_contents, bfd_false}, | |
| BFD_JUMP_TABLE_GENERIC (coff_small), | |
| BFD_JUMP_TABLE_COPY (coff), | |
| BFD_JUMP_TABLE_CORE (_bfd_nocore), | |
| BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff), | |
| BFD_JUMP_TABLE_SYMBOLS (coff), | |
| BFD_JUMP_TABLE_RELOCS (coff), | |
| BFD_JUMP_TABLE_WRITE (coff), | |
| BFD_JUMP_TABLE_LINK (coff), | |
| BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), | |
| & shcoff_small_vec, | |
| (PTR) &bfd_coff_small_swap_table | |
| }; | |
| #endif |