| /* BFD back-end for RISC iX (Acorn, arm) binaries. | |
| Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2004, | |
| 2005, 2007 Free Software Foundation, Inc. | |
| Contributed by Richard Earnshaw (rwe@pegasus.esprit.ec.org) | |
| This file is part of BFD, the Binary File Descriptor library. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, | |
| MA 02110-1301, USA. */ | |
| /* RISC iX overloads the MAGIC field to indicate more than just the usual | |
| [ZNO]MAGIC values. Also included are squeezing information and | |
| shared library usage. */ | |
| /* The following come from the man page. */ | |
| #define SHLIBLEN 60 | |
| #define MF_IMPURE 00200 | |
| #define MF_SQUEEZED 01000 | |
| #define MF_USES_SL 02000 | |
| #define MF_IS_SL 04000 | |
| /* Common combinations. */ | |
| /* Demand load (impure text). */ | |
| #define IMAGIC (MF_IMPURE | ZMAGIC) | |
| /* OMAGIC with large header. | |
| May contain a ref to a shared lib required by the object. */ | |
| #define SPOMAGIC (MF_USES_SL | OMAGIC) | |
| /* A reference to a shared library. | |
| The text portion of the object contains "overflow text" from | |
| the shared library to be linked in with an object. */ | |
| #define SLOMAGIC (MF_IS_SL | OMAGIC) | |
| /* Sqeezed demand paged. | |
| NOTE: This interpretation of QMAGIC seems to be at variance | |
| with that used on other architectures. */ | |
| #define QMAGIC (MF_SQUEEZED | ZMAGIC) | |
| /* Program which uses sl. */ | |
| #define SPZMAGIC (MF_USES_SL | ZMAGIC) | |
| /* Sqeezed ditto. */ | |
| #define SPQMAGIC (MF_USES_SL | QMAGIC) | |
| /* Shared lib part of prog. */ | |
| #define SLZMAGIC (MF_IS_SL | ZMAGIC) | |
| /* Sl which uses another. */ | |
| #define SLPZMAGIC (MF_USES_SL | SLZMAGIC) | |
| #define N_SHARED_LIB(x) ((x).a_info & MF_USES_SL) | |
| /* Only a pure OMAGIC file has the minimal header. */ | |
| #define N_TXTOFF(x) \ | |
| ((x).a_info == OMAGIC \ | |
| ? 32 \ | |
| : (N_MAGIC(x) == ZMAGIC \ | |
| ? TARGET_PAGE_SIZE \ | |
| : 999)) | |
| #define N_TXTADDR(x) \ | |
| (N_MAGIC(x) != ZMAGIC \ | |
| ? (bfd_vma) 0 /* object file or NMAGIC */ \ | |
| /* Programs with shared libs are loaded at the first page after all the \ | |
| text segments of the shared library programs. Without looking this \ | |
| up we can't know exactly what the address will be. A reasonable guess \ | |
| is that a_entry will be in the first page of the executable. */ \ | |
| : (N_SHARED_LIB(x) \ | |
| ? ((x).a_entry & ~(bfd_vma) (TARGET_PAGE_SIZE - 1)) \ | |
| : (bfd_vma) TEXT_START_ADDR)) | |
| #define N_SYMOFF(x) \ | |
| (N_TXTOFF (x) + (x).a_text + (x).a_data + (x).a_trsize + (x).a_drsize) | |
| #define N_STROFF(x) (N_SYMOFF (x) + (x).a_syms) | |
| #define TEXT_START_ADDR 32768 | |
| #define TARGET_PAGE_SIZE 32768 | |
| #define SEGMENT_SIZE TARGET_PAGE_SIZE | |
| #define DEFAULT_ARCH bfd_arch_arm | |
| /* Do not "beautify" the CONCAT* macro args. Traditional C will not | |
| remove whitespace added here, and thus will fail to concatenate | |
| the tokens. */ | |
| #define MY(OP) CONCAT2 (riscix_,OP) | |
| #define TARGETNAME "a.out-riscix" | |
| #define N_BADMAG(x) ((((x).a_info & ~007200) != ZMAGIC) \ | |
| && (((x).a_info & ~006000) != OMAGIC) \ | |
| && ((x).a_info != NMAGIC)) | |
| #define N_MAGIC(x) ((x).a_info & ~07200) | |
| #include "sysdep.h" | |
| #include "bfd.h" | |
| #include "libbfd.h" | |
| #define WRITE_HEADERS(abfd, execp) \ | |
| { \ | |
| bfd_size_type text_size; /* Dummy vars. */ \ | |
| file_ptr text_end; \ | |
| \ | |
| if (adata (abfd).magic == undecided_magic) \ | |
| NAME (aout, adjust_sizes_and_vmas) (abfd, & text_size, & text_end); \ | |
| \ | |
| execp->a_syms = bfd_get_symcount (abfd) * EXTERNAL_NLIST_SIZE; \ | |
| execp->a_entry = bfd_get_start_address (abfd); \ | |
| \ | |
| execp->a_trsize = ((obj_textsec (abfd)->reloc_count) * \ | |
| obj_reloc_entry_size (abfd)); \ | |
| execp->a_drsize = ((obj_datasec (abfd)->reloc_count) * \ | |
| obj_reloc_entry_size (abfd)); \ | |
| NAME (aout, swap_exec_header_out) (abfd, execp, & exec_bytes); \ | |
| \ | |
| if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0 \ | |
| || bfd_bwrite ((void *) & exec_bytes, (bfd_size_type) EXEC_BYTES_SIZE, \ | |
| abfd) != EXEC_BYTES_SIZE) \ | |
| return FALSE; \ | |
| /* Now write out reloc info, followed by syms and strings. */ \ | |
| \ | |
| if (bfd_get_outsymbols (abfd) != NULL \ | |
| && bfd_get_symcount (abfd) != 0) \ | |
| { \ | |
| if (bfd_seek (abfd, (file_ptr) (N_SYMOFF (* execp)), SEEK_SET) != 0)\ | |
| return FALSE; \ | |
| \ | |
| if (! NAME (aout, write_syms) (abfd)) \ | |
| return FALSE; \ | |
| \ | |
| if (bfd_seek (abfd, (file_ptr) (N_TRELOFF (* execp)), SEEK_SET) != 0)\ | |
| return FALSE; \ | |
| \ | |
| if (! riscix_squirt_out_relocs (abfd, obj_textsec (abfd))) \ | |
| return FALSE; \ | |
| if (bfd_seek (abfd, (file_ptr) (N_DRELOFF (* execp)), SEEK_SET) != 0)\ | |
| return FALSE; \ | |
| \ | |
| if (!NAME (aout, squirt_out_relocs) (abfd, obj_datasec (abfd))) \ | |
| return FALSE; \ | |
| } \ | |
| } | |
| #include "libaout.h" | |
| #include "aout/aout64.h" | |
| static bfd_reloc_status_type | |
| riscix_fix_pcrel_26_done (bfd *abfd ATTRIBUTE_UNUSED, | |
| arelent *reloc_entry ATTRIBUTE_UNUSED, | |
| asymbol *symbol ATTRIBUTE_UNUSED, | |
| void * data ATTRIBUTE_UNUSED, | |
| asection *input_section ATTRIBUTE_UNUSED, | |
| bfd *output_bfd ATTRIBUTE_UNUSED, | |
| char **error_message ATTRIBUTE_UNUSED) | |
| { | |
| /* This is dead simple at present. */ | |
| return bfd_reloc_ok; | |
| } | |
| static bfd_reloc_status_type riscix_fix_pcrel_26 (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); | |
| static const bfd_target *riscix_callback (bfd *); | |
| static reloc_howto_type riscix_std_reloc_howto[] = | |
| { | |
| /* Type rs size bsz pcrel bitpos ovrf sf name part_inpl readmask setmask pcdone */ | |
| HOWTO( 0, 0, 0, 8, FALSE, 0, complain_overflow_bitfield,0,"8", TRUE, 0x000000ff,0x000000ff, FALSE), | |
| HOWTO( 1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield,0,"16", TRUE, 0x0000ffff,0x0000ffff, FALSE), | |
| HOWTO( 2, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,0,"32", TRUE, 0xffffffff,0xffffffff, FALSE), | |
| HOWTO( 3, 2, 3, 26, TRUE, 0, complain_overflow_signed, riscix_fix_pcrel_26 , "ARM26", TRUE, 0x00ffffff,0x00ffffff, FALSE), | |
| HOWTO( 4, 0, 0, 8, TRUE, 0, complain_overflow_signed, 0,"DISP8", TRUE, 0x000000ff,0x000000ff, TRUE), | |
| HOWTO( 5, 0, 1, 16, TRUE, 0, complain_overflow_signed, 0,"DISP16", TRUE, 0x0000ffff,0x0000ffff, TRUE), | |
| HOWTO( 6, 0, 2, 32, TRUE, 0, complain_overflow_signed, 0,"DISP32", TRUE, 0xffffffff,0xffffffff, TRUE), | |
| HOWTO( 7, 2, 3, 26, FALSE, 0, complain_overflow_signed, riscix_fix_pcrel_26_done, "ARM26D",TRUE,0x00ffffff,0x00ffffff, FALSE), | |
| EMPTY_HOWTO (-1), | |
| HOWTO( 9, 0, -1, 16, FALSE, 0, complain_overflow_bitfield,0,"NEG16", TRUE, 0x0000ffff,0x0000ffff, FALSE), | |
| HOWTO( 10, 0, -2, 32, FALSE, 0, complain_overflow_bitfield,0,"NEG32", TRUE, 0xffffffff,0xffffffff, FALSE) | |
| }; | |
| #define RISCIX_TABLE_SIZE \ | |
| (sizeof (riscix_std_reloc_howto) / sizeof (reloc_howto_type)) | |
| static bfd_reloc_status_type | |
| riscix_fix_pcrel_26 (bfd *abfd, | |
| arelent *reloc_entry, | |
| asymbol *symbol, | |
| void * data, | |
| asection *input_section, | |
| bfd *output_bfd, | |
| char **error_message ATTRIBUTE_UNUSED) | |
| { | |
| bfd_vma relocation; | |
| bfd_size_type addr = reloc_entry->address; | |
| long target = bfd_get_32 (abfd, (bfd_byte *) data + addr); | |
| bfd_reloc_status_type flag = bfd_reloc_ok; | |
| /* If this is an undefined symbol, return error. */ | |
| if (symbol->section == &bfd_und_section | |
| && (symbol->flags & BSF_WEAK) == 0) | |
| return output_bfd ? bfd_reloc_continue : bfd_reloc_undefined; | |
| /* If the sections are different, and we are doing a partial relocation, | |
| just ignore it for now. */ | |
| if (symbol->section->name != input_section->name | |
| && output_bfd != NULL) | |
| return bfd_reloc_continue; | |
| relocation = (target & 0x00ffffff) << 2; | |
| relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend. */ | |
| relocation += symbol->value; | |
| relocation += symbol->section->output_section->vma; | |
| relocation += symbol->section->output_offset; | |
| relocation += reloc_entry->addend; | |
| relocation -= input_section->output_section->vma; | |
| relocation -= input_section->output_offset; | |
| relocation -= addr; | |
| if (relocation & 3) | |
| return bfd_reloc_overflow; | |
| /* Check for overflow. */ | |
| if (relocation & 0x02000000) | |
| { | |
| if ((relocation & ~ (bfd_vma) 0x03ffffff) != ~ (bfd_vma) 0x03ffffff) | |
| flag = bfd_reloc_overflow; | |
| } | |
| else if (relocation & ~ (bfd_vma) 0x03ffffff) | |
| flag = bfd_reloc_overflow; | |
| target &= ~0x00ffffff; | |
| target |= (relocation >> 2) & 0x00ffffff; | |
| bfd_put_32 (abfd, (bfd_vma) target, (bfd_byte *) data + addr); | |
| /* Now the ARM magic... Change the reloc type so that it is marked as done. | |
| Strictly this is only necessary if we are doing a partial relocation. */ | |
| reloc_entry->howto = &riscix_std_reloc_howto[7]; | |
| return flag; | |
| } | |
| static reloc_howto_type * | |
| riscix_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code) | |
| { | |
| #define ASTD(i,j) case i: return &riscix_std_reloc_howto[j] | |
| if (code == BFD_RELOC_CTOR) | |
| switch (bfd_get_arch_info (abfd)->bits_per_address) | |
| { | |
| case 32: | |
| code = BFD_RELOC_32; | |
| break; | |
| default: | |
| return NULL; | |
| } | |
| switch (code) | |
| { | |
| ASTD (BFD_RELOC_16, 1); | |
| ASTD (BFD_RELOC_32, 2); | |
| ASTD (BFD_RELOC_ARM_PCREL_BRANCH, 3); | |
| ASTD (BFD_RELOC_8_PCREL, 4); | |
| ASTD (BFD_RELOC_16_PCREL, 5); | |
| ASTD (BFD_RELOC_32_PCREL, 6); | |
| default: | |
| return NULL; | |
| } | |
| } | |
| static reloc_howto_type * | |
| riscix_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, | |
| const char *r_name) | |
| { | |
| unsigned int i; | |
| for (i = 0; | |
| i < sizeof (riscix_std_reloc_howto) / sizeof (riscix_std_reloc_howto[0]); | |
| i++) | |
| if (riscix_std_reloc_howto[i].name != NULL | |
| && strcasecmp (riscix_std_reloc_howto[i].name, r_name) == 0) | |
| return &riscix_std_reloc_howto[i]; | |
| return NULL; | |
| } | |
| #define MY_bfd_link_hash_table_create _bfd_generic_link_hash_table_create | |
| #define MY_bfd_link_add_symbols _bfd_generic_link_add_symbols | |
| #define MY_final_link_callback should_not_be_used | |
| #define MY_bfd_final_link _bfd_generic_final_link | |
| #define MY_bfd_reloc_type_lookup riscix_reloc_type_lookup | |
| #define MY_bfd_reloc_name_lookup riscix_reloc_name_lookup | |
| #define MY_canonicalize_reloc riscix_canonicalize_reloc | |
| #define MY_object_p riscix_object_p | |
| static void | |
| riscix_swap_std_reloc_out (bfd *abfd, | |
| arelent *g, | |
| struct reloc_std_external *natptr) | |
| { | |
| int r_index; | |
| asymbol *sym = *(g->sym_ptr_ptr); | |
| int r_extern; | |
| int r_length; | |
| int r_pcrel; | |
| int r_neg = 0; /* Negative relocs use the BASEREL bit. */ | |
| asection *output_section = sym->section->output_section; | |
| PUT_WORD(abfd, g->address, natptr->r_address); | |
| r_length = g->howto->size ; /* Size as a power of two. */ | |
| if (r_length < 0) | |
| { | |
| r_length = -r_length; | |
| r_neg = 1; | |
| } | |
| r_pcrel = (int) g->howto->pc_relative; /* Relative to PC? */ | |
| /* For RISC iX, in pc-relative relocs the r_pcrel bit means that the | |
| relocation has been done already (Only for the 26-bit one I think)? */ | |
| if (r_length == 3) | |
| r_pcrel = r_pcrel ? 0 : 1; | |
| /* Name was clobbered by aout_write_syms to be symbol index. */ | |
| /* If this relocation is relative to a symbol then set the | |
| r_index to the symbols index, and the r_extern bit. | |
| Absolute symbols can come in in two ways, either as an offset | |
| from the abs section, or as a symbol which has an abs value. | |
| check for that here. */ | |
| if (bfd_is_com_section (output_section) | |
| || output_section == & bfd_abs_section | |
| || output_section == & bfd_und_section) | |
| { | |
| if (bfd_abs_section.symbol == sym) | |
| { | |
| /* Whoops, looked like an abs symbol, but is really an offset | |
| from the abs section. */ | |
| r_index = 0; | |
| r_extern = 0; | |
| } | |
| else | |
| { | |
| /* Fill in symbol. */ | |
| r_extern = 1; | |
| r_index = (*g->sym_ptr_ptr)->udata.i; | |
| } | |
| } | |
| else | |
| { | |
| /* Just an ordinary section. */ | |
| r_extern = 0; | |
| r_index = output_section->target_index; | |
| } | |
| /* Now the fun stuff. */ | |
| if (bfd_header_big_endian (abfd)) | |
| { | |
| natptr->r_index[0] = r_index >> 16; | |
| natptr->r_index[1] = r_index >> 8; | |
| natptr->r_index[2] = r_index; | |
| natptr->r_type[0] = | |
| ( (r_extern ? RELOC_STD_BITS_EXTERN_BIG: 0) | |
| | (r_pcrel ? RELOC_STD_BITS_PCREL_BIG: 0) | |
| | (r_neg ? RELOC_STD_BITS_BASEREL_BIG: 0) | |
| | (r_length << RELOC_STD_BITS_LENGTH_SH_BIG)); | |
| } | |
| else | |
| { | |
| natptr->r_index[2] = r_index >> 16; | |
| natptr->r_index[1] = r_index >> 8; | |
| natptr->r_index[0] = r_index; | |
| natptr->r_type[0] = | |
| ( (r_extern ? RELOC_STD_BITS_EXTERN_LITTLE: 0) | |
| | (r_pcrel ? RELOC_STD_BITS_PCREL_LITTLE: 0) | |
| | (r_neg ? RELOC_STD_BITS_BASEREL_LITTLE: 0) | |
| | (r_length << RELOC_STD_BITS_LENGTH_SH_LITTLE)); | |
| } | |
| } | |
| static bfd_boolean | |
| riscix_squirt_out_relocs (bfd *abfd, asection *section) | |
| { | |
| arelent **generic; | |
| unsigned char *native, *natptr; | |
| size_t each_size; | |
| unsigned int count = section->reloc_count; | |
| bfd_size_type natsize; | |
| if (count == 0) | |
| return TRUE; | |
| each_size = obj_reloc_entry_size (abfd); | |
| natsize = each_size; | |
| natsize *= count; | |
| native = bfd_zalloc (abfd, natsize); | |
| if (!native) | |
| return FALSE; | |
| generic = section->orelocation; | |
| for (natptr = native; | |
| count != 0; | |
| --count, natptr += each_size, ++generic) | |
| riscix_swap_std_reloc_out (abfd, *generic, | |
| (struct reloc_std_external *) natptr); | |
| if (bfd_bwrite ((void *) native, natsize, abfd) != natsize) | |
| { | |
| bfd_release (abfd, native); | |
| return FALSE; | |
| } | |
| bfd_release (abfd, native); | |
| return TRUE; | |
| } | |
| /* This is just like the standard aoutx.h version but we need to do our | |
| own mapping of external reloc type values to howto entries. */ | |
| static long | |
| MY (canonicalize_reloc) (bfd *abfd, | |
| sec_ptr section, | |
| arelent **relptr, | |
| asymbol **symbols) | |
| { | |
| arelent *tblptr = section->relocation; | |
| unsigned int count, c; | |
| extern reloc_howto_type NAME (aout, std_howto_table)[]; | |
| /* If we have already read in the relocation table, return the values. */ | |
| if (section->flags & SEC_CONSTRUCTOR) | |
| { | |
| arelent_chain *chain = section->constructor_chain; | |
| for (count = 0; count < section->reloc_count; count++) | |
| { | |
| *relptr++ = &chain->relent; | |
| chain = chain->next; | |
| } | |
| *relptr = 0; | |
| return section->reloc_count; | |
| } | |
| if (tblptr && section->reloc_count) | |
| { | |
| for (count = 0; count++ < section->reloc_count;) | |
| *relptr++ = tblptr++; | |
| *relptr = 0; | |
| return section->reloc_count; | |
| } | |
| if (!NAME (aout, slurp_reloc_table) (abfd, section, symbols)) | |
| return -1; | |
| tblptr = section->relocation; | |
| /* Fix up howto entries. */ | |
| for (count = 0; count++ < section->reloc_count;) | |
| { | |
| c = tblptr->howto - NAME(aout,std_howto_table); | |
| BFD_ASSERT (c < RISCIX_TABLE_SIZE); | |
| tblptr->howto = &riscix_std_reloc_howto[c]; | |
| *relptr++ = tblptr++; | |
| } | |
| *relptr = 0; | |
| return section->reloc_count; | |
| } | |
| /* This is the same as NAME(aout,some_aout_object_p), but has different | |
| expansions of the macro definitions. */ | |
| static const bfd_target * | |
| riscix_some_aout_object_p (bfd *abfd, | |
| struct internal_exec *execp, | |
| const bfd_target *(*callback_to_real_object_p) (bfd *)) | |
| { | |
| struct aout_data_struct *rawptr, *oldrawptr; | |
| const bfd_target *result; | |
| bfd_size_type amt = sizeof (struct aout_data_struct); | |
| rawptr = bfd_zalloc (abfd, amt); | |
| if (rawptr == NULL) | |
| return NULL; | |
| oldrawptr = abfd->tdata.aout_data; | |
| abfd->tdata.aout_data = rawptr; | |
| /* Copy the contents of the old tdata struct. | |
| In particular, we want the subformat, since for hpux it was set in | |
| hp300hpux.c:swap_exec_header_in and will be used in | |
| hp300hpux.c:callback. */ | |
| if (oldrawptr != NULL) | |
| *abfd->tdata.aout_data = *oldrawptr; | |
| abfd->tdata.aout_data->a.hdr = &rawptr->e; | |
| /* Copy in the internal_exec struct. */ | |
| *(abfd->tdata.aout_data->a.hdr) = *execp; | |
| execp = abfd->tdata.aout_data->a.hdr; | |
| /* Set the file flags. */ | |
| abfd->flags = BFD_NO_FLAGS; | |
| if (execp->a_drsize || execp->a_trsize) | |
| abfd->flags |= HAS_RELOC; | |
| /* Setting of EXEC_P has been deferred to the bottom of this function. */ | |
| if (execp->a_syms) | |
| abfd->flags |= HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS; | |
| if (N_DYNAMIC(*execp)) | |
| abfd->flags |= DYNAMIC; | |
| /* Squeezed files aren't supported (yet)! */ | |
| if ((execp->a_info & MF_SQUEEZED) != 0) | |
| { | |
| bfd_set_error (bfd_error_wrong_format); | |
| return NULL; | |
| } | |
| else if ((execp->a_info & MF_IS_SL) != 0) | |
| { | |
| /* Nor are shared libraries. */ | |
| bfd_set_error (bfd_error_wrong_format); | |
| return NULL; | |
| } | |
| else if (N_MAGIC (*execp) == ZMAGIC) | |
| { | |
| abfd->flags |= D_PAGED | WP_TEXT; | |
| adata (abfd).magic = z_magic; | |
| } | |
| else if (N_MAGIC (*execp) == NMAGIC) | |
| { | |
| abfd->flags |= WP_TEXT; | |
| adata (abfd).magic = n_magic; | |
| } | |
| else if (N_MAGIC (*execp) == OMAGIC) | |
| adata (abfd).magic = o_magic; | |
| else | |
| /* Should have been checked with N_BADMAG before this routine | |
| was called. */ | |
| abort (); | |
| bfd_get_start_address (abfd) = execp->a_entry; | |
| obj_aout_symbols (abfd) = NULL; | |
| bfd_get_symcount (abfd) = execp->a_syms / sizeof (struct external_nlist); | |
| /* The default relocation entry size is that of traditional V7 Unix. */ | |
| obj_reloc_entry_size (abfd) = RELOC_STD_SIZE; | |
| /* The default symbol entry size is that of traditional Unix. */ | |
| obj_symbol_entry_size (abfd) = EXTERNAL_NLIST_SIZE; | |
| obj_aout_external_syms (abfd) = NULL; | |
| obj_aout_external_strings (abfd) = NULL; | |
| obj_aout_sym_hashes (abfd) = NULL; | |
| if (! NAME (aout, make_sections) (abfd)) | |
| return NULL; | |
| obj_datasec (abfd)->size = execp->a_data; | |
| obj_bsssec (abfd)->size = execp->a_bss; | |
| obj_textsec (abfd)->flags = | |
| (execp->a_trsize != 0 | |
| ? (SEC_ALLOC | SEC_LOAD | SEC_CODE | SEC_HAS_CONTENTS | SEC_RELOC) | |
| : (SEC_ALLOC | SEC_LOAD | SEC_CODE | SEC_HAS_CONTENTS)); | |
| obj_datasec (abfd)->flags = | |
| (execp->a_drsize != 0 | |
| ? (SEC_ALLOC | SEC_LOAD | SEC_DATA | SEC_HAS_CONTENTS | SEC_RELOC) | |
| : (SEC_ALLOC | SEC_LOAD | SEC_DATA | SEC_HAS_CONTENTS)); | |
| obj_bsssec (abfd)->flags = SEC_ALLOC; | |
| result = (*callback_to_real_object_p) (abfd); | |
| #if defined(MACH) || defined(STAT_FOR_EXEC) | |
| /* The original heuristic doesn't work in some important cases. The | |
| a.out file has no information about the text start address. For | |
| files (like kernels) linked to non-standard addresses (ld -Ttext | |
| nnn) the entry point may not be between the default text start | |
| (obj_textsec(abfd)->vma) and (obj_textsec(abfd)->vma) + text size | |
| This is not just a mach issue. Many kernels are loaded at non | |
| standard addresses. */ | |
| { | |
| struct stat stat_buf; | |
| if (abfd->iostream != NULL | |
| && (abfd->flags & BFD_IN_MEMORY) == 0 | |
| && (fstat(fileno((FILE *) (abfd->iostream)), &stat_buf) == 0) | |
| && ((stat_buf.st_mode & 0111) != 0)) | |
| abfd->flags |= EXEC_P; | |
| } | |
| #else /* ! MACH */ | |
| /* Now that the segment addresses have been worked out, take a better | |
| guess at whether the file is executable. If the entry point | |
| is within the text segment, assume it is. (This makes files | |
| executable even if their entry point address is 0, as long as | |
| their text starts at zero.) | |
| At some point we should probably break down and stat the file and | |
| declare it executable if (one of) its 'x' bits are on... */ | |
| if ((execp->a_entry >= obj_textsec(abfd)->vma) && | |
| (execp->a_entry < obj_textsec(abfd)->vma + obj_textsec(abfd)->size)) | |
| abfd->flags |= EXEC_P; | |
| #endif /* MACH */ | |
| if (result == NULL) | |
| { | |
| free (rawptr); | |
| abfd->tdata.aout_data = oldrawptr; | |
| } | |
| return result; | |
| } | |
| static const bfd_target * | |
| MY (object_p) (bfd *abfd) | |
| { | |
| struct external_exec exec_bytes; /* Raw exec header from file. */ | |
| struct internal_exec exec; /* Cleaned-up exec header. */ | |
| const bfd_target *target; | |
| if (bfd_bread ((void *) &exec_bytes, (bfd_size_type) EXEC_BYTES_SIZE, abfd) | |
| != EXEC_BYTES_SIZE) | |
| { | |
| if (bfd_get_error () != bfd_error_system_call) | |
| bfd_set_error (bfd_error_wrong_format); | |
| return NULL; | |
| } | |
| exec.a_info = H_GET_32 (abfd, exec_bytes.e_info); | |
| if (N_BADMAG (exec)) | |
| return NULL; | |
| #ifdef MACHTYPE_OK | |
| if (!(MACHTYPE_OK (N_MACHTYPE (exec)))) | |
| return NULL; | |
| #endif | |
| NAME (aout, swap_exec_header_in) (abfd, & exec_bytes, & exec); | |
| target = riscix_some_aout_object_p (abfd, & exec, MY (callback)); | |
| return target; | |
| } | |
| #include "aout-target.h" |