| /* BFD back-end for s-record objects. | |
| Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, | |
| 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 | |
| Free Software Foundation, Inc. | |
| Written by Steve Chamberlain of Cygnus Support <sac@cygnus.com>. | |
| This file is part of BFD, the Binary File Descriptor library. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, | |
| MA 02110-1301, USA. */ | |
| /* SUBSECTION | |
| S-Record handling | |
| DESCRIPTION | |
| Ordinary S-Records cannot hold anything but addresses and | |
| data, so that's all that we implement. | |
| The only interesting thing is that S-Records may come out of | |
| order and there is no header, so an initial scan is required | |
| to discover the minimum and maximum addresses used to create | |
| the vma and size of the only section we create. We | |
| arbitrarily call this section ".text". | |
| When bfd_get_section_contents is called the file is read | |
| again, and this time the data is placed into a bfd_alloc'd | |
| area. | |
| Any number of sections may be created for output, we save them | |
| up and output them when it's time to close the bfd. | |
| An s record looks like: | |
| EXAMPLE | |
| S<type><length><address><data><checksum> | |
| DESCRIPTION | |
| Where | |
| o length | |
| is the number of bytes following upto the checksum. Note that | |
| this is not the number of chars following, since it takes two | |
| chars to represent a byte. | |
| o type | |
| is one of: | |
| 0) header record | |
| 1) two byte address data record | |
| 2) three byte address data record | |
| 3) four byte address data record | |
| 7) four byte address termination record | |
| 8) three byte address termination record | |
| 9) two byte address termination record | |
| o address | |
| is the start address of the data following, or in the case of | |
| a termination record, the start address of the image | |
| o data | |
| is the data. | |
| o checksum | |
| is the sum of all the raw byte data in the record, from the length | |
| upwards, modulo 256 and subtracted from 255. | |
| SUBSECTION | |
| Symbol S-Record handling | |
| DESCRIPTION | |
| Some ICE equipment understands an addition to the standard | |
| S-Record format; symbols and their addresses can be sent | |
| before the data. | |
| The format of this is: | |
| ($$ <modulename> | |
| (<space> <symbol> <address>)*) | |
| $$ | |
| so a short symbol table could look like: | |
| EXAMPLE | |
| $$ flash.x | |
| $$ flash.c | |
| _port6 $0 | |
| _delay $4 | |
| _start $14 | |
| _etext $8036 | |
| _edata $8036 | |
| _end $8036 | |
| $$ | |
| DESCRIPTION | |
| We allow symbols to be anywhere in the data stream - the module names | |
| are always ignored. */ | |
| #include "sysdep.h" | |
| #include "bfd.h" | |
| #include "libbfd.h" | |
| #include "libiberty.h" | |
| #include "safe-ctype.h" | |
| /* Macros for converting between hex and binary. */ | |
| static const char digs[] = "0123456789ABCDEF"; | |
| #define NIBBLE(x) hex_value(x) | |
| #define HEX(buffer) ((NIBBLE ((buffer)[0])<<4) + NIBBLE ((buffer)[1])) | |
| #define TOHEX(d, x, ch) \ | |
| d[1] = digs[(x) & 0xf]; \ | |
| d[0] = digs[((x)>>4)&0xf]; \ | |
| ch += ((x) & 0xff); | |
| #define ISHEX(x) hex_p(x) | |
| /* The maximum number of address+data+crc bytes on a line is FF. */ | |
| #define MAXCHUNK 0xff | |
| /* Default size for a CHUNK. */ | |
| #define DEFAULT_CHUNK 16 | |
| /* The number of data bytes we actually fit onto a line on output. | |
| This variable can be modified by objcopy's --srec-len parameter. | |
| For a 0x75 byte record you should set --srec-len=0x70. */ | |
| unsigned int Chunk = DEFAULT_CHUNK; | |
| /* The type of srec output (free or forced to S3). | |
| This variable can be modified by objcopy's --srec-forceS3 | |
| parameter. */ | |
| bfd_boolean S3Forced = FALSE; | |
| /* When writing an S-record file, the S-records can not be output as | |
| they are seen. This structure is used to hold them in memory. */ | |
| struct srec_data_list_struct | |
| { | |
| struct srec_data_list_struct *next; | |
| bfd_byte *data; | |
| bfd_vma where; | |
| bfd_size_type size; | |
| }; | |
| typedef struct srec_data_list_struct srec_data_list_type; | |
| /* When scanning the S-record file, a linked list of srec_symbol | |
| structures is built to represent the symbol table (if there is | |
| one). */ | |
| struct srec_symbol | |
| { | |
| struct srec_symbol *next; | |
| const char *name; | |
| bfd_vma val; | |
| }; | |
| /* The S-record tdata information. */ | |
| typedef struct srec_data_struct | |
| { | |
| srec_data_list_type *head; | |
| srec_data_list_type *tail; | |
| unsigned int type; | |
| struct srec_symbol *symbols; | |
| struct srec_symbol *symtail; | |
| asymbol *csymbols; | |
| } | |
| tdata_type; | |
| /* Initialize by filling in the hex conversion array. */ | |
| static void | |
| srec_init (void) | |
| { | |
| static bfd_boolean inited = FALSE; | |
| if (! inited) | |
| { | |
| inited = TRUE; | |
| hex_init (); | |
| } | |
| } | |
| /* Set up the S-record tdata information. */ | |
| static bfd_boolean | |
| srec_mkobject (bfd *abfd) | |
| { | |
| tdata_type *tdata; | |
| srec_init (); | |
| tdata = bfd_alloc (abfd, sizeof (tdata_type)); | |
| if (tdata == NULL) | |
| return FALSE; | |
| abfd->tdata.srec_data = tdata; | |
| tdata->type = 1; | |
| tdata->head = NULL; | |
| tdata->tail = NULL; | |
| tdata->symbols = NULL; | |
| tdata->symtail = NULL; | |
| tdata->csymbols = NULL; | |
| return TRUE; | |
| } | |
| /* Read a byte from an S record file. Set *ERRORPTR if an error | |
| occurred. Return EOF on error or end of file. */ | |
| static int | |
| srec_get_byte (bfd *abfd, bfd_boolean *errorptr) | |
| { | |
| bfd_byte c; | |
| if (bfd_bread (&c, (bfd_size_type) 1, abfd) != 1) | |
| { | |
| if (bfd_get_error () != bfd_error_file_truncated) | |
| *errorptr = TRUE; | |
| return EOF; | |
| } | |
| return (int) (c & 0xff); | |
| } | |
| /* Report a problem in an S record file. FIXME: This probably should | |
| not call fprintf, but we really do need some mechanism for printing | |
| error messages. */ | |
| static void | |
| srec_bad_byte (bfd *abfd, | |
| unsigned int lineno, | |
| int c, | |
| bfd_boolean error) | |
| { | |
| if (c == EOF) | |
| { | |
| if (! error) | |
| bfd_set_error (bfd_error_file_truncated); | |
| } | |
| else | |
| { | |
| char buf[10]; | |
| if (! ISPRINT (c)) | |
| sprintf (buf, "\\%03o", (unsigned int) c); | |
| else | |
| { | |
| buf[0] = c; | |
| buf[1] = '\0'; | |
| } | |
| (*_bfd_error_handler) | |
| (_("%B:%d: Unexpected character `%s' in S-record file\n"), | |
| abfd, lineno, buf); | |
| bfd_set_error (bfd_error_bad_value); | |
| } | |
| } | |
| /* Add a new symbol found in an S-record file. */ | |
| static bfd_boolean | |
| srec_new_symbol (bfd *abfd, const char *name, bfd_vma val) | |
| { | |
| struct srec_symbol *n; | |
| n = bfd_alloc (abfd, sizeof (* n)); | |
| if (n == NULL) | |
| return FALSE; | |
| n->name = name; | |
| n->val = val; | |
| if (abfd->tdata.srec_data->symbols == NULL) | |
| abfd->tdata.srec_data->symbols = n; | |
| else | |
| abfd->tdata.srec_data->symtail->next = n; | |
| abfd->tdata.srec_data->symtail = n; | |
| n->next = NULL; | |
| ++abfd->symcount; | |
| return TRUE; | |
| } | |
| /* Read the S record file and turn it into sections. We create a new | |
| section for each contiguous set of bytes. */ | |
| static bfd_boolean | |
| srec_scan (bfd *abfd) | |
| { | |
| int c; | |
| unsigned int lineno = 1; | |
| bfd_boolean error = FALSE; | |
| bfd_byte *buf = NULL; | |
| size_t bufsize = 0; | |
| asection *sec = NULL; | |
| char *symbuf = NULL; | |
| if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0) | |
| goto error_return; | |
| while ((c = srec_get_byte (abfd, &error)) != EOF) | |
| { | |
| /* We only build sections from contiguous S-records, so if this | |
| is not an S-record, then stop building a section. */ | |
| if (c != 'S' && c != '\r' && c != '\n') | |
| sec = NULL; | |
| switch (c) | |
| { | |
| default: | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| case '\n': | |
| ++lineno; | |
| break; | |
| case '\r': | |
| break; | |
| case '$': | |
| /* Starting a module name, which we ignore. */ | |
| while ((c = srec_get_byte (abfd, &error)) != '\n' | |
| && c != EOF) | |
| ; | |
| if (c == EOF) | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| ++lineno; | |
| break; | |
| case ' ': | |
| do | |
| { | |
| bfd_size_type alc; | |
| char *p, *symname; | |
| bfd_vma symval; | |
| /* Starting a symbol definition. */ | |
| while ((c = srec_get_byte (abfd, &error)) != EOF | |
| && (c == ' ' || c == '\t')) | |
| ; | |
| if (c == '\n' || c == '\r') | |
| break; | |
| if (c == EOF) | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| alc = 10; | |
| symbuf = bfd_malloc (alc + 1); | |
| if (symbuf == NULL) | |
| goto error_return; | |
| p = symbuf; | |
| *p++ = c; | |
| while ((c = srec_get_byte (abfd, &error)) != EOF | |
| && ! ISSPACE (c)) | |
| { | |
| if ((bfd_size_type) (p - symbuf) >= alc) | |
| { | |
| char *n; | |
| alc *= 2; | |
| n = bfd_realloc (symbuf, alc + 1); | |
| if (n == NULL) | |
| goto error_return; | |
| p = n + (p - symbuf); | |
| symbuf = n; | |
| } | |
| *p++ = c; | |
| } | |
| if (c == EOF) | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| *p++ = '\0'; | |
| symname = bfd_alloc (abfd, (bfd_size_type) (p - symbuf)); | |
| if (symname == NULL) | |
| goto error_return; | |
| strcpy (symname, symbuf); | |
| free (symbuf); | |
| symbuf = NULL; | |
| while ((c = srec_get_byte (abfd, &error)) != EOF | |
| && (c == ' ' || c == '\t')) | |
| ; | |
| if (c == EOF) | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| /* Skip a dollar sign before the hex value. */ | |
| if (c == '$') | |
| { | |
| c = srec_get_byte (abfd, &error); | |
| if (c == EOF) | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| } | |
| symval = 0; | |
| while (ISHEX (c)) | |
| { | |
| symval <<= 4; | |
| symval += NIBBLE (c); | |
| c = srec_get_byte (abfd, &error); | |
| if (c == EOF) | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| } | |
| if (! srec_new_symbol (abfd, symname, symval)) | |
| goto error_return; | |
| } | |
| while (c == ' ' || c == '\t') | |
| ; | |
| if (c == '\n') | |
| ++lineno; | |
| else if (c != '\r') | |
| { | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| break; | |
| case 'S': | |
| { | |
| file_ptr pos; | |
| char hdr[3]; | |
| unsigned int bytes; | |
| bfd_vma address; | |
| bfd_byte *data; | |
| unsigned char check_sum; | |
| /* Starting an S-record. */ | |
| pos = bfd_tell (abfd) - 1; | |
| if (bfd_bread (hdr, (bfd_size_type) 3, abfd) != 3) | |
| goto error_return; | |
| if (! ISHEX (hdr[1]) || ! ISHEX (hdr[2])) | |
| { | |
| if (! ISHEX (hdr[1])) | |
| c = hdr[1]; | |
| else | |
| c = hdr[2]; | |
| srec_bad_byte (abfd, lineno, c, error); | |
| goto error_return; | |
| } | |
| check_sum = bytes = HEX (hdr + 1); | |
| if (bytes * 2 > bufsize) | |
| { | |
| if (buf != NULL) | |
| free (buf); | |
| buf = bfd_malloc ((bfd_size_type) bytes * 2); | |
| if (buf == NULL) | |
| goto error_return; | |
| bufsize = bytes * 2; | |
| } | |
| if (bfd_bread (buf, (bfd_size_type) bytes * 2, abfd) != bytes * 2) | |
| goto error_return; | |
| /* Ignore the checksum byte. */ | |
| --bytes; | |
| address = 0; | |
| data = buf; | |
| switch (hdr[0]) | |
| { | |
| case '0': | |
| case '5': | |
| /* Prologue--ignore the file name, but stop building a | |
| section at this point. */ | |
| sec = NULL; | |
| break; | |
| case '3': | |
| check_sum += HEX (data); | |
| address = HEX (data); | |
| data += 2; | |
| --bytes; | |
| /* Fall through. */ | |
| case '2': | |
| check_sum += HEX (data); | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| --bytes; | |
| /* Fall through. */ | |
| case '1': | |
| check_sum += HEX (data); | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| check_sum += HEX (data); | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| bytes -= 2; | |
| if (sec != NULL | |
| && sec->vma + sec->size == address) | |
| { | |
| /* This data goes at the end of the section we are | |
| currently building. */ | |
| sec->size += bytes; | |
| } | |
| else | |
| { | |
| char secbuf[20]; | |
| char *secname; | |
| bfd_size_type amt; | |
| flagword flags; | |
| sprintf (secbuf, ".sec%d", bfd_count_sections (abfd) + 1); | |
| amt = strlen (secbuf) + 1; | |
| secname = bfd_alloc (abfd, amt); | |
| strcpy (secname, secbuf); | |
| flags = SEC_HAS_CONTENTS | SEC_LOAD | SEC_ALLOC; | |
| sec = bfd_make_section_with_flags (abfd, secname, flags); | |
| if (sec == NULL) | |
| goto error_return; | |
| sec->vma = address; | |
| sec->lma = address; | |
| sec->size = bytes; | |
| sec->filepos = pos; | |
| } | |
| while (bytes > 0) | |
| { | |
| check_sum += HEX (data); | |
| data += 2; | |
| bytes--; | |
| } | |
| check_sum = 255 - (check_sum & 0xff); | |
| if (check_sum != HEX (data)) | |
| { | |
| (*_bfd_error_handler) | |
| (_("%B:%d: Bad checksum in S-record file\n"), | |
| abfd, lineno); | |
| bfd_set_error (bfd_error_bad_value); | |
| goto error_return; | |
| } | |
| break; | |
| case '7': | |
| check_sum += HEX (data); | |
| address = HEX (data); | |
| data += 2; | |
| /* Fall through. */ | |
| case '8': | |
| check_sum += HEX (data); | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| /* Fall through. */ | |
| case '9': | |
| check_sum += HEX (data); | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| check_sum += HEX (data); | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| /* This is a termination record. */ | |
| abfd->start_address = address; | |
| check_sum = 255 - (check_sum & 0xff); | |
| if (check_sum != HEX (data)) | |
| { | |
| (*_bfd_error_handler) | |
| (_("%B:%d: Bad checksum in S-record file\n"), | |
| abfd, lineno); | |
| bfd_set_error (bfd_error_bad_value); | |
| goto error_return; | |
| } | |
| if (buf != NULL) | |
| free (buf); | |
| return TRUE; | |
| } | |
| } | |
| break; | |
| } | |
| } | |
| if (error) | |
| goto error_return; | |
| if (buf != NULL) | |
| free (buf); | |
| return TRUE; | |
| error_return: | |
| if (symbuf != NULL) | |
| free (symbuf); | |
| if (buf != NULL) | |
| free (buf); | |
| return FALSE; | |
| } | |
| /* Check whether an existing file is an S-record file. */ | |
| static const bfd_target * | |
| srec_object_p (bfd *abfd) | |
| { | |
| void * tdata_save; | |
| bfd_byte b[4]; | |
| srec_init (); | |
| if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0 | |
| || bfd_bread (b, (bfd_size_type) 4, abfd) != 4) | |
| return NULL; | |
| if (b[0] != 'S' || !ISHEX (b[1]) || !ISHEX (b[2]) || !ISHEX (b[3])) | |
| { | |
| bfd_set_error (bfd_error_wrong_format); | |
| return NULL; | |
| } | |
| tdata_save = abfd->tdata.any; | |
| if (! srec_mkobject (abfd) || ! srec_scan (abfd)) | |
| { | |
| if (abfd->tdata.any != tdata_save && abfd->tdata.any != NULL) | |
| bfd_release (abfd, abfd->tdata.any); | |
| abfd->tdata.any = tdata_save; | |
| return NULL; | |
| } | |
| if (abfd->symcount > 0) | |
| abfd->flags |= HAS_SYMS; | |
| return abfd->xvec; | |
| } | |
| /* Check whether an existing file is an S-record file with symbols. */ | |
| static const bfd_target * | |
| symbolsrec_object_p (bfd *abfd) | |
| { | |
| void * tdata_save; | |
| char b[2]; | |
| srec_init (); | |
| if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0 | |
| || bfd_bread (b, (bfd_size_type) 2, abfd) != 2) | |
| return NULL; | |
| if (b[0] != '$' || b[1] != '$') | |
| { | |
| bfd_set_error (bfd_error_wrong_format); | |
| return NULL; | |
| } | |
| tdata_save = abfd->tdata.any; | |
| if (! srec_mkobject (abfd) || ! srec_scan (abfd)) | |
| { | |
| if (abfd->tdata.any != tdata_save && abfd->tdata.any != NULL) | |
| bfd_release (abfd, abfd->tdata.any); | |
| abfd->tdata.any = tdata_save; | |
| return NULL; | |
| } | |
| if (abfd->symcount > 0) | |
| abfd->flags |= HAS_SYMS; | |
| return abfd->xvec; | |
| } | |
| /* Read in the contents of a section in an S-record file. */ | |
| static bfd_boolean | |
| srec_read_section (bfd *abfd, asection *section, bfd_byte *contents) | |
| { | |
| int c; | |
| bfd_size_type sofar = 0; | |
| bfd_boolean error = FALSE; | |
| bfd_byte *buf = NULL; | |
| size_t bufsize = 0; | |
| if (bfd_seek (abfd, section->filepos, SEEK_SET) != 0) | |
| goto error_return; | |
| while ((c = srec_get_byte (abfd, &error)) != EOF) | |
| { | |
| bfd_byte hdr[3]; | |
| unsigned int bytes; | |
| bfd_vma address; | |
| bfd_byte *data; | |
| if (c == '\r' || c == '\n') | |
| continue; | |
| /* This is called after srec_scan has already been called, so we | |
| ought to know the exact format. */ | |
| BFD_ASSERT (c == 'S'); | |
| if (bfd_bread (hdr, (bfd_size_type) 3, abfd) != 3) | |
| goto error_return; | |
| BFD_ASSERT (ISHEX (hdr[1]) && ISHEX (hdr[2])); | |
| bytes = HEX (hdr + 1); | |
| if (bytes * 2 > bufsize) | |
| { | |
| if (buf != NULL) | |
| free (buf); | |
| buf = bfd_malloc ((bfd_size_type) bytes * 2); | |
| if (buf == NULL) | |
| goto error_return; | |
| bufsize = bytes * 2; | |
| } | |
| if (bfd_bread (buf, (bfd_size_type) bytes * 2, abfd) != bytes * 2) | |
| goto error_return; | |
| address = 0; | |
| data = buf; | |
| switch (hdr[0]) | |
| { | |
| default: | |
| BFD_ASSERT (sofar == section->size); | |
| if (buf != NULL) | |
| free (buf); | |
| return TRUE; | |
| case '3': | |
| address = HEX (data); | |
| data += 2; | |
| --bytes; | |
| /* Fall through. */ | |
| case '2': | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| --bytes; | |
| /* Fall through. */ | |
| case '1': | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| address = (address << 8) | HEX (data); | |
| data += 2; | |
| bytes -= 2; | |
| if (address != section->vma + sofar) | |
| { | |
| /* We've come to the end of this section. */ | |
| BFD_ASSERT (sofar == section->size); | |
| if (buf != NULL) | |
| free (buf); | |
| return TRUE; | |
| } | |
| /* Don't consider checksum. */ | |
| --bytes; | |
| while (bytes-- != 0) | |
| { | |
| contents[sofar] = HEX (data); | |
| data += 2; | |
| ++sofar; | |
| } | |
| break; | |
| } | |
| } | |
| if (error) | |
| goto error_return; | |
| BFD_ASSERT (sofar == section->size); | |
| if (buf != NULL) | |
| free (buf); | |
| return TRUE; | |
| error_return: | |
| if (buf != NULL) | |
| free (buf); | |
| return FALSE; | |
| } | |
| /* Get the contents of a section in an S-record file. */ | |
| static bfd_boolean | |
| srec_get_section_contents (bfd *abfd, | |
| asection *section, | |
| void * location, | |
| file_ptr offset, | |
| bfd_size_type count) | |
| { | |
| if (count == 0) | |
| return TRUE; | |
| if (offset + count < count | |
| || offset + count > section->size) | |
| { | |
| bfd_set_error (bfd_error_invalid_operation); | |
| return FALSE; | |
| } | |
| if (section->used_by_bfd == NULL) | |
| { | |
| section->used_by_bfd = bfd_alloc (abfd, section->size); | |
| if (section->used_by_bfd == NULL) | |
| return FALSE; | |
| if (! srec_read_section (abfd, section, section->used_by_bfd)) | |
| return FALSE; | |
| } | |
| memcpy (location, (bfd_byte *) section->used_by_bfd + offset, | |
| (size_t) count); | |
| return TRUE; | |
| } | |
| /* Set the architecture. We accept an unknown architecture here. */ | |
| static bfd_boolean | |
| srec_set_arch_mach (bfd *abfd, enum bfd_architecture arch, unsigned long mach) | |
| { | |
| if (arch != bfd_arch_unknown) | |
| return bfd_default_set_arch_mach (abfd, arch, mach); | |
| abfd->arch_info = & bfd_default_arch_struct; | |
| return TRUE; | |
| } | |
| /* We have to save up all the Srecords for a splurge before output. */ | |
| static bfd_boolean | |
| srec_set_section_contents (bfd *abfd, | |
| sec_ptr section, | |
| const void * location, | |
| file_ptr offset, | |
| bfd_size_type bytes_to_do) | |
| { | |
| tdata_type *tdata = abfd->tdata.srec_data; | |
| srec_data_list_type *entry; | |
| entry = bfd_alloc (abfd, sizeof (* entry)); | |
| if (entry == NULL) | |
| return FALSE; | |
| if (bytes_to_do | |
| && (section->flags & SEC_ALLOC) | |
| && (section->flags & SEC_LOAD)) | |
| { | |
| bfd_byte *data; | |
| data = bfd_alloc (abfd, bytes_to_do); | |
| if (data == NULL) | |
| return FALSE; | |
| memcpy ((void *) data, location, (size_t) bytes_to_do); | |
| /* Ff S3Forced is TRUE then always select S3 records, | |
| regardless of the siez of the addresses. */ | |
| if (S3Forced) | |
| tdata->type = 3; | |
| else if ((section->lma + offset + bytes_to_do - 1) <= 0xffff) | |
| ; /* The default, S1, is OK. */ | |
| else if ((section->lma + offset + bytes_to_do - 1) <= 0xffffff | |
| && tdata->type <= 2) | |
| tdata->type = 2; | |
| else | |
| tdata->type = 3; | |
| entry->data = data; | |
| entry->where = section->lma + offset; | |
| entry->size = bytes_to_do; | |
| /* Sort the records by address. Optimize for the common case of | |
| adding a record to the end of the list. */ | |
| if (tdata->tail != NULL | |
| && entry->where >= tdata->tail->where) | |
| { | |
| tdata->tail->next = entry; | |
| entry->next = NULL; | |
| tdata->tail = entry; | |
| } | |
| else | |
| { | |
| srec_data_list_type **look; | |
| for (look = &tdata->head; | |
| *look != NULL && (*look)->where < entry->where; | |
| look = &(*look)->next) | |
| ; | |
| entry->next = *look; | |
| *look = entry; | |
| if (entry->next == NULL) | |
| tdata->tail = entry; | |
| } | |
| } | |
| return TRUE; | |
| } | |
| /* Write a record of type, of the supplied number of bytes. The | |
| supplied bytes and length don't have a checksum. That's worked out | |
| here. */ | |
| static bfd_boolean | |
| srec_write_record (bfd *abfd, | |
| unsigned int type, | |
| bfd_vma address, | |
| const bfd_byte *data, | |
| const bfd_byte *end) | |
| { | |
| char buffer[2 * MAXCHUNK + 6]; | |
| unsigned int check_sum = 0; | |
| const bfd_byte *src = data; | |
| char *dst = buffer; | |
| char *length; | |
| bfd_size_type wrlen; | |
| *dst++ = 'S'; | |
| *dst++ = '0' + type; | |
| length = dst; | |
| dst += 2; /* Leave room for dst. */ | |
| switch (type) | |
| { | |
| case 3: | |
| case 7: | |
| TOHEX (dst, (address >> 24), check_sum); | |
| dst += 2; | |
| case 8: | |
| case 2: | |
| TOHEX (dst, (address >> 16), check_sum); | |
| dst += 2; | |
| case 9: | |
| case 1: | |
| case 0: | |
| TOHEX (dst, (address >> 8), check_sum); | |
| dst += 2; | |
| TOHEX (dst, (address), check_sum); | |
| dst += 2; | |
| break; | |
| } | |
| for (src = data; src < end; src++) | |
| { | |
| TOHEX (dst, *src, check_sum); | |
| dst += 2; | |
| } | |
| /* Fill in the length. */ | |
| TOHEX (length, (dst - length) / 2, check_sum); | |
| check_sum &= 0xff; | |
| check_sum = 255 - check_sum; | |
| TOHEX (dst, check_sum, check_sum); | |
| dst += 2; | |
| *dst++ = '\r'; | |
| *dst++ = '\n'; | |
| wrlen = dst - buffer; | |
| return bfd_bwrite ((void *) buffer, wrlen, abfd) == wrlen; | |
| } | |
| static bfd_boolean | |
| srec_write_header (bfd *abfd) | |
| { | |
| unsigned int len = strlen (abfd->filename); | |
| /* I'll put an arbitrary 40 char limit on header size. */ | |
| if (len > 40) | |
| len = 40; | |
| return srec_write_record (abfd, 0, (bfd_vma) 0, | |
| (bfd_byte *) abfd->filename, | |
| (bfd_byte *) abfd->filename + len); | |
| } | |
| static bfd_boolean | |
| srec_write_section (bfd *abfd, | |
| tdata_type *tdata, | |
| srec_data_list_type *list) | |
| { | |
| unsigned int octets_written = 0; | |
| bfd_byte *location = list->data; | |
| /* Validate number of data bytes to write. The srec length byte | |
| counts the address, data and crc bytes. S1 (tdata->type == 1) | |
| records have two address bytes, S2 (tdata->type == 2) records | |
| have three, and S3 (tdata->type == 3) records have four. | |
| The total length can't exceed 255, and a zero data length will | |
| spin for a long time. */ | |
| if (Chunk == 0) | |
| Chunk = 1; | |
| else if (Chunk > MAXCHUNK - tdata->type - 2) | |
| Chunk = MAXCHUNK - tdata->type - 2; | |
| while (octets_written < list->size) | |
| { | |
| bfd_vma address; | |
| unsigned int octets_this_chunk = list->size - octets_written; | |
| if (octets_this_chunk > Chunk) | |
| octets_this_chunk = Chunk; | |
| address = list->where + octets_written / bfd_octets_per_byte (abfd); | |
| if (! srec_write_record (abfd, | |
| tdata->type, | |
| address, | |
| location, | |
| location + octets_this_chunk)) | |
| return FALSE; | |
| octets_written += octets_this_chunk; | |
| location += octets_this_chunk; | |
| } | |
| return TRUE; | |
| } | |
| static bfd_boolean | |
| srec_write_terminator (bfd *abfd, tdata_type *tdata) | |
| { | |
| return srec_write_record (abfd, 10 - tdata->type, | |
| abfd->start_address, NULL, NULL); | |
| } | |
| static bfd_boolean | |
| srec_write_symbols (bfd *abfd) | |
| { | |
| /* Dump out the symbols of a bfd. */ | |
| int i; | |
| int count = bfd_get_symcount (abfd); | |
| if (count) | |
| { | |
| bfd_size_type len; | |
| asymbol **table = bfd_get_outsymbols (abfd); | |
| len = strlen (abfd->filename); | |
| if (bfd_bwrite ("$$ ", (bfd_size_type) 3, abfd) != 3 | |
| || bfd_bwrite (abfd->filename, len, abfd) != len | |
| || bfd_bwrite ("\r\n", (bfd_size_type) 2, abfd) != 2) | |
| return FALSE; | |
| for (i = 0; i < count; i++) | |
| { | |
| asymbol *s = table[i]; | |
| if (! bfd_is_local_label (abfd, s) | |
| && (s->flags & BSF_DEBUGGING) == 0) | |
| { | |
| /* Just dump out non debug symbols. */ | |
| char buf[43], *p; | |
| len = strlen (s->name); | |
| if (bfd_bwrite (" ", (bfd_size_type) 2, abfd) != 2 | |
| || bfd_bwrite (s->name, len, abfd) != len) | |
| return FALSE; | |
| sprintf_vma (buf + 2, (s->value | |
| + s->section->output_section->lma | |
| + s->section->output_offset)); | |
| p = buf + 2; | |
| while (p[0] == '0' && p[1] != 0) | |
| p++; | |
| len = strlen (p); | |
| p[len] = '\r'; | |
| p[len + 1] = '\n'; | |
| *--p = '$'; | |
| *--p = ' '; | |
| len += 4; | |
| if (bfd_bwrite (p, len, abfd) != len) | |
| return FALSE; | |
| } | |
| } | |
| if (bfd_bwrite ("$$ \r\n", (bfd_size_type) 5, abfd) != 5) | |
| return FALSE; | |
| } | |
| return TRUE; | |
| } | |
| static bfd_boolean | |
| internal_srec_write_object_contents (bfd *abfd, int symbols) | |
| { | |
| tdata_type *tdata = abfd->tdata.srec_data; | |
| srec_data_list_type *list; | |
| if (symbols) | |
| { | |
| if (! srec_write_symbols (abfd)) | |
| return FALSE; | |
| } | |
| if (! srec_write_header (abfd)) | |
| return FALSE; | |
| /* Now wander though all the sections provided and output them. */ | |
| list = tdata->head; | |
| while (list != (srec_data_list_type *) NULL) | |
| { | |
| if (! srec_write_section (abfd, tdata, list)) | |
| return FALSE; | |
| list = list->next; | |
| } | |
| return srec_write_terminator (abfd, tdata); | |
| } | |
| static bfd_boolean | |
| srec_write_object_contents (bfd *abfd) | |
| { | |
| return internal_srec_write_object_contents (abfd, 0); | |
| } | |
| static bfd_boolean | |
| symbolsrec_write_object_contents (bfd *abfd) | |
| { | |
| return internal_srec_write_object_contents (abfd, 1); | |
| } | |
| static int | |
| srec_sizeof_headers (bfd *abfd ATTRIBUTE_UNUSED, | |
| struct bfd_link_info *info ATTRIBUTE_UNUSED) | |
| { | |
| return 0; | |
| } | |
| /* Return the amount of memory needed to read the symbol table. */ | |
| static long | |
| srec_get_symtab_upper_bound (bfd *abfd) | |
| { | |
| return (bfd_get_symcount (abfd) + 1) * sizeof (asymbol *); | |
| } | |
| /* Return the symbol table. */ | |
| static long | |
| srec_canonicalize_symtab (bfd *abfd, asymbol **alocation) | |
| { | |
| bfd_size_type symcount = bfd_get_symcount (abfd); | |
| asymbol *csymbols; | |
| unsigned int i; | |
| csymbols = abfd->tdata.srec_data->csymbols; | |
| if (csymbols == NULL && symcount != 0) | |
| { | |
| asymbol *c; | |
| struct srec_symbol *s; | |
| csymbols = bfd_alloc (abfd, symcount * sizeof (asymbol)); | |
| if (csymbols == NULL) | |
| return -1; | |
| abfd->tdata.srec_data->csymbols = csymbols; | |
| for (s = abfd->tdata.srec_data->symbols, c = csymbols; | |
| s != NULL; | |
| s = s->next, ++c) | |
| { | |
| c->the_bfd = abfd; | |
| c->name = s->name; | |
| c->value = s->val; | |
| c->flags = BSF_GLOBAL; | |
| c->section = bfd_abs_section_ptr; | |
| c->udata.p = NULL; | |
| } | |
| } | |
| for (i = 0; i < symcount; i++) | |
| *alocation++ = csymbols++; | |
| *alocation = NULL; | |
| return symcount; | |
| } | |
| static void | |
| srec_get_symbol_info (bfd *ignore_abfd ATTRIBUTE_UNUSED, | |
| asymbol *symbol, | |
| symbol_info *ret) | |
| { | |
| bfd_symbol_info (symbol, ret); | |
| } | |
| static void | |
| srec_print_symbol (bfd *abfd, | |
| void * afile, | |
| asymbol *symbol, | |
| bfd_print_symbol_type how) | |
| { | |
| FILE *file = (FILE *) afile; | |
| switch (how) | |
| { | |
| case bfd_print_symbol_name: | |
| fprintf (file, "%s", symbol->name); | |
| break; | |
| default: | |
| bfd_print_symbol_vandf (abfd, (void *) file, symbol); | |
| fprintf (file, " %-5s %s", | |
| symbol->section->name, | |
| symbol->name); | |
| } | |
| } | |
| #define srec_close_and_cleanup _bfd_generic_close_and_cleanup | |
| #define srec_bfd_free_cached_info _bfd_generic_bfd_free_cached_info | |
| #define srec_new_section_hook _bfd_generic_new_section_hook | |
| #define srec_bfd_is_target_special_symbol ((bfd_boolean (*) (bfd *, asymbol *)) bfd_false) | |
| #define srec_bfd_is_local_label_name bfd_generic_is_local_label_name | |
| #define srec_get_lineno _bfd_nosymbols_get_lineno | |
| #define srec_find_nearest_line _bfd_nosymbols_find_nearest_line | |
| #define srec_find_inliner_info _bfd_nosymbols_find_inliner_info | |
| #define srec_make_empty_symbol _bfd_generic_make_empty_symbol | |
| #define srec_bfd_make_debug_symbol _bfd_nosymbols_bfd_make_debug_symbol | |
| #define srec_read_minisymbols _bfd_generic_read_minisymbols | |
| #define srec_minisymbol_to_symbol _bfd_generic_minisymbol_to_symbol | |
| #define srec_get_section_contents_in_window _bfd_generic_get_section_contents_in_window | |
| #define srec_bfd_get_relocated_section_contents bfd_generic_get_relocated_section_contents | |
| #define srec_bfd_relax_section bfd_generic_relax_section | |
| #define srec_bfd_gc_sections bfd_generic_gc_sections | |
| #define srec_bfd_merge_sections bfd_generic_merge_sections | |
| #define srec_bfd_is_group_section bfd_generic_is_group_section | |
| #define srec_bfd_discard_group bfd_generic_discard_group | |
| #define srec_section_already_linked _bfd_generic_section_already_linked | |
| #define srec_bfd_link_hash_table_create _bfd_generic_link_hash_table_create | |
| #define srec_bfd_link_hash_table_free _bfd_generic_link_hash_table_free | |
| #define srec_bfd_link_add_symbols _bfd_generic_link_add_symbols | |
| #define srec_bfd_link_just_syms _bfd_generic_link_just_syms | |
| #define srec_bfd_final_link _bfd_generic_final_link | |
| #define srec_bfd_link_split_section _bfd_generic_link_split_section | |
| const bfd_target srec_vec = | |
| { | |
| "srec", /* Name. */ | |
| bfd_target_srec_flavour, | |
| BFD_ENDIAN_UNKNOWN, /* Target byte order. */ | |
| BFD_ENDIAN_UNKNOWN, /* Target headers byte order. */ | |
| (HAS_RELOC | EXEC_P | /* Object flags. */ | |
| HAS_LINENO | HAS_DEBUG | | |
| HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED), | |
| (SEC_CODE | SEC_DATA | SEC_ROM | SEC_HAS_CONTENTS | |
| | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* Section flags. */ | |
| 0, /* Leading underscore. */ | |
| ' ', /* AR_pad_char. */ | |
| 16, /* AR_max_namelen. */ | |
| bfd_getb64, bfd_getb_signed_64, bfd_putb64, | |
| bfd_getb32, bfd_getb_signed_32, bfd_putb32, | |
| bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* Data. */ | |
| bfd_getb64, bfd_getb_signed_64, bfd_putb64, | |
| bfd_getb32, bfd_getb_signed_32, bfd_putb32, | |
| bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* Hdrs. */ | |
| { | |
| _bfd_dummy_target, | |
| srec_object_p, /* bfd_check_format. */ | |
| _bfd_dummy_target, | |
| _bfd_dummy_target, | |
| }, | |
| { | |
| bfd_false, | |
| srec_mkobject, | |
| _bfd_generic_mkarchive, | |
| bfd_false, | |
| }, | |
| { /* bfd_write_contents. */ | |
| bfd_false, | |
| srec_write_object_contents, | |
| _bfd_write_archive_contents, | |
| bfd_false, | |
| }, | |
| BFD_JUMP_TABLE_GENERIC (srec), | |
| BFD_JUMP_TABLE_COPY (_bfd_generic), | |
| BFD_JUMP_TABLE_CORE (_bfd_nocore), | |
| BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive), | |
| BFD_JUMP_TABLE_SYMBOLS (srec), | |
| BFD_JUMP_TABLE_RELOCS (_bfd_norelocs), | |
| BFD_JUMP_TABLE_WRITE (srec), | |
| BFD_JUMP_TABLE_LINK (srec), | |
| BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), | |
| NULL, | |
| NULL | |
| }; | |
| const bfd_target symbolsrec_vec = | |
| { | |
| "symbolsrec", /* Name. */ | |
| bfd_target_srec_flavour, | |
| BFD_ENDIAN_UNKNOWN, /* Target byte order. */ | |
| BFD_ENDIAN_UNKNOWN, /* Target headers byte order. */ | |
| (HAS_RELOC | EXEC_P | /* Object flags. */ | |
| HAS_LINENO | HAS_DEBUG | | |
| HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED), | |
| (SEC_CODE | SEC_DATA | SEC_ROM | SEC_HAS_CONTENTS | |
| | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* Section flags. */ | |
| 0, /* Leading underscore. */ | |
| ' ', /* AR_pad_char. */ | |
| 16, /* AR_max_namelen. */ | |
| bfd_getb64, bfd_getb_signed_64, bfd_putb64, | |
| bfd_getb32, bfd_getb_signed_32, bfd_putb32, | |
| bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* Data. */ | |
| bfd_getb64, bfd_getb_signed_64, bfd_putb64, | |
| bfd_getb32, bfd_getb_signed_32, bfd_putb32, | |
| bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* Headers. */ | |
| { | |
| _bfd_dummy_target, | |
| symbolsrec_object_p, /* bfd_check_format. */ | |
| _bfd_dummy_target, | |
| _bfd_dummy_target, | |
| }, | |
| { | |
| bfd_false, | |
| srec_mkobject, | |
| _bfd_generic_mkarchive, | |
| bfd_false, | |
| }, | |
| { /* bfd_write_contents. */ | |
| bfd_false, | |
| symbolsrec_write_object_contents, | |
| _bfd_write_archive_contents, | |
| bfd_false, | |
| }, | |
| BFD_JUMP_TABLE_GENERIC (srec), | |
| BFD_JUMP_TABLE_COPY (_bfd_generic), | |
| BFD_JUMP_TABLE_CORE (_bfd_nocore), | |
| BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive), | |
| BFD_JUMP_TABLE_SYMBOLS (srec), | |
| BFD_JUMP_TABLE_RELOCS (_bfd_norelocs), | |
| BFD_JUMP_TABLE_WRITE (srec), | |
| BFD_JUMP_TABLE_LINK (srec), | |
| BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), | |
| NULL, | |
| NULL | |
| }; |