| /* GNU/Linux on ARM target support. | |
| Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "target.h" | |
| #include "value.h" | |
| #include "gdbtypes.h" | |
| #include "floatformat.h" | |
| #include "gdbcore.h" | |
| #include "frame.h" | |
| #include "regcache.h" | |
| #include "doublest.h" | |
| #include "solib-svr4.h" | |
| #include "osabi.h" | |
| #include "regset.h" | |
| #include "trad-frame.h" | |
| #include "tramp-frame.h" | |
| #include "breakpoint.h" | |
| #include "arm-tdep.h" | |
| #include "arm-linux-tdep.h" | |
| #include "glibc-tdep.h" | |
| #include "gdb_string.h" | |
| extern int arm_apcs_32; | |
| /* Under ARM GNU/Linux the traditional way of performing a breakpoint | |
| is to execute a particular software interrupt, rather than use a | |
| particular undefined instruction to provoke a trap. Upon exection | |
| of the software interrupt the kernel stops the inferior with a | |
| SIGTRAP, and wakes the debugger. */ | |
| static const char arm_linux_arm_le_breakpoint[] = { 0x01, 0x00, 0x9f, 0xef }; | |
| static const char arm_linux_arm_be_breakpoint[] = { 0xef, 0x9f, 0x00, 0x01 }; | |
| /* However, the EABI syscall interface (new in Nov. 2005) does not look at | |
| the operand of the swi if old-ABI compatibility is disabled. Therefore, | |
| use an undefined instruction instead. This is supported as of kernel | |
| version 2.5.70 (May 2003), so should be a safe assumption for EABI | |
| binaries. */ | |
| static const char eabi_linux_arm_le_breakpoint[] = { 0xf0, 0x01, 0xf0, 0xe7 }; | |
| static const char eabi_linux_arm_be_breakpoint[] = { 0xe7, 0xf0, 0x01, 0xf0 }; | |
| /* All the kernels which support Thumb support using a specific undefined | |
| instruction for the Thumb breakpoint. */ | |
| static const char arm_linux_thumb_be_breakpoint[] = {0xde, 0x01}; | |
| static const char arm_linux_thumb_le_breakpoint[] = {0x01, 0xde}; | |
| /* Description of the longjmp buffer. */ | |
| #define ARM_LINUX_JB_ELEMENT_SIZE INT_REGISTER_SIZE | |
| #define ARM_LINUX_JB_PC 21 | |
| /* | |
| Dynamic Linking on ARM GNU/Linux | |
| -------------------------------- | |
| Note: PLT = procedure linkage table | |
| GOT = global offset table | |
| As much as possible, ELF dynamic linking defers the resolution of | |
| jump/call addresses until the last minute. The technique used is | |
| inspired by the i386 ELF design, and is based on the following | |
| constraints. | |
| 1) The calling technique should not force a change in the assembly | |
| code produced for apps; it MAY cause changes in the way assembly | |
| code is produced for position independent code (i.e. shared | |
| libraries). | |
| 2) The technique must be such that all executable areas must not be | |
| modified; and any modified areas must not be executed. | |
| To do this, there are three steps involved in a typical jump: | |
| 1) in the code | |
| 2) through the PLT | |
| 3) using a pointer from the GOT | |
| When the executable or library is first loaded, each GOT entry is | |
| initialized to point to the code which implements dynamic name | |
| resolution and code finding. This is normally a function in the | |
| program interpreter (on ARM GNU/Linux this is usually | |
| ld-linux.so.2, but it does not have to be). On the first | |
| invocation, the function is located and the GOT entry is replaced | |
| with the real function address. Subsequent calls go through steps | |
| 1, 2 and 3 and end up calling the real code. | |
| 1) In the code: | |
| b function_call | |
| bl function_call | |
| This is typical ARM code using the 26 bit relative branch or branch | |
| and link instructions. The target of the instruction | |
| (function_call is usually the address of the function to be called. | |
| In position independent code, the target of the instruction is | |
| actually an entry in the PLT when calling functions in a shared | |
| library. Note that this call is identical to a normal function | |
| call, only the target differs. | |
| 2) In the PLT: | |
| The PLT is a synthetic area, created by the linker. It exists in | |
| both executables and libraries. It is an array of stubs, one per | |
| imported function call. It looks like this: | |
| PLT[0]: | |
| str lr, [sp, #-4]! @push the return address (lr) | |
| ldr lr, [pc, #16] @load from 6 words ahead | |
| add lr, pc, lr @form an address for GOT[0] | |
| ldr pc, [lr, #8]! @jump to the contents of that addr | |
| The return address (lr) is pushed on the stack and used for | |
| calculations. The load on the second line loads the lr with | |
| &GOT[3] - . - 20. The addition on the third leaves: | |
| lr = (&GOT[3] - . - 20) + (. + 8) | |
| lr = (&GOT[3] - 12) | |
| lr = &GOT[0] | |
| On the fourth line, the pc and lr are both updated, so that: | |
| pc = GOT[2] | |
| lr = &GOT[0] + 8 | |
| = &GOT[2] | |
| NOTE: PLT[0] borrows an offset .word from PLT[1]. This is a little | |
| "tight", but allows us to keep all the PLT entries the same size. | |
| PLT[n+1]: | |
| ldr ip, [pc, #4] @load offset from gotoff | |
| add ip, pc, ip @add the offset to the pc | |
| ldr pc, [ip] @jump to that address | |
| gotoff: .word GOT[n+3] - . | |
| The load on the first line, gets an offset from the fourth word of | |
| the PLT entry. The add on the second line makes ip = &GOT[n+3], | |
| which contains either a pointer to PLT[0] (the fixup trampoline) or | |
| a pointer to the actual code. | |
| 3) In the GOT: | |
| The GOT contains helper pointers for both code (PLT) fixups and | |
| data fixups. The first 3 entries of the GOT are special. The next | |
| M entries (where M is the number of entries in the PLT) belong to | |
| the PLT fixups. The next D (all remaining) entries belong to | |
| various data fixups. The actual size of the GOT is 3 + M + D. | |
| The GOT is also a synthetic area, created by the linker. It exists | |
| in both executables and libraries. When the GOT is first | |
| initialized , all the GOT entries relating to PLT fixups are | |
| pointing to code back at PLT[0]. | |
| The special entries in the GOT are: | |
| GOT[0] = linked list pointer used by the dynamic loader | |
| GOT[1] = pointer to the reloc table for this module | |
| GOT[2] = pointer to the fixup/resolver code | |
| The first invocation of function call comes through and uses the | |
| fixup/resolver code. On the entry to the fixup/resolver code: | |
| ip = &GOT[n+3] | |
| lr = &GOT[2] | |
| stack[0] = return address (lr) of the function call | |
| [r0, r1, r2, r3] are still the arguments to the function call | |
| This is enough information for the fixup/resolver code to work | |
| with. Before the fixup/resolver code returns, it actually calls | |
| the requested function and repairs &GOT[n+3]. */ | |
| /* The constants below were determined by examining the following files | |
| in the linux kernel sources: | |
| arch/arm/kernel/signal.c | |
| - see SWI_SYS_SIGRETURN and SWI_SYS_RT_SIGRETURN | |
| include/asm-arm/unistd.h | |
| - see __NR_sigreturn, __NR_rt_sigreturn, and __NR_SYSCALL_BASE */ | |
| #define ARM_LINUX_SIGRETURN_INSTR 0xef900077 | |
| #define ARM_LINUX_RT_SIGRETURN_INSTR 0xef9000ad | |
| /* For ARM EABI, the syscall number is not in the SWI instruction | |
| (instead it is loaded into r7). We recognize the pattern that | |
| glibc uses... alternatively, we could arrange to do this by | |
| function name, but they are not always exported. */ | |
| #define ARM_SET_R7_SIGRETURN 0xe3a07077 | |
| #define ARM_SET_R7_RT_SIGRETURN 0xe3a070ad | |
| #define ARM_EABI_SYSCALL 0xef000000 | |
| static void | |
| arm_linux_sigtramp_cache (struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func, int regs_offset) | |
| { | |
| CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM); | |
| CORE_ADDR base = sp + regs_offset; | |
| int i; | |
| for (i = 0; i < 16; i++) | |
| trad_frame_set_reg_addr (this_cache, i, base + i * 4); | |
| trad_frame_set_reg_addr (this_cache, ARM_PS_REGNUM, base + 16 * 4); | |
| /* The VFP or iWMMXt registers may be saved on the stack, but there's | |
| no reliable way to restore them (yet). */ | |
| /* Save a frame ID. */ | |
| trad_frame_set_id (this_cache, frame_id_build (sp, func)); | |
| } | |
| /* There are a couple of different possible stack layouts that | |
| we need to support. | |
| Before version 2.6.18, the kernel used completely independent | |
| layouts for non-RT and RT signals. For non-RT signals the stack | |
| began directly with a struct sigcontext. For RT signals the stack | |
| began with two redundant pointers (to the siginfo and ucontext), | |
| and then the siginfo and ucontext. | |
| As of version 2.6.18, the non-RT signal frame layout starts with | |
| a ucontext and the RT signal frame starts with a siginfo and then | |
| a ucontext. Also, the ucontext now has a designated save area | |
| for coprocessor registers. | |
| For RT signals, it's easy to tell the difference: we look for | |
| pinfo, the pointer to the siginfo. If it has the expected | |
| value, we have an old layout. If it doesn't, we have the new | |
| layout. | |
| For non-RT signals, it's a bit harder. We need something in one | |
| layout or the other with a recognizable offset and value. We can't | |
| use the return trampoline, because ARM usually uses SA_RESTORER, | |
| in which case the stack return trampoline is not filled in. | |
| We can't use the saved stack pointer, because sigaltstack might | |
| be in use. So for now we guess the new layout... */ | |
| /* There are three words (trap_no, error_code, oldmask) in | |
| struct sigcontext before r0. */ | |
| #define ARM_SIGCONTEXT_R0 0xc | |
| /* There are five words (uc_flags, uc_link, and three for uc_stack) | |
| in the ucontext_t before the sigcontext. */ | |
| #define ARM_UCONTEXT_SIGCONTEXT 0x14 | |
| /* There are three elements in an rt_sigframe before the ucontext: | |
| pinfo, puc, and info. The first two are pointers and the third | |
| is a struct siginfo, with size 128 bytes. We could follow puc | |
| to the ucontext, but it's simpler to skip the whole thing. */ | |
| #define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8 | |
| #define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88 | |
| #define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80 | |
| #define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a | |
| static void | |
| arm_linux_sigreturn_init (const struct tramp_frame *self, | |
| struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func) | |
| { | |
| CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM); | |
| ULONGEST uc_flags = read_memory_unsigned_integer (sp, 4); | |
| if (uc_flags == ARM_NEW_SIGFRAME_MAGIC) | |
| arm_linux_sigtramp_cache (this_frame, this_cache, func, | |
| ARM_UCONTEXT_SIGCONTEXT | |
| + ARM_SIGCONTEXT_R0); | |
| else | |
| arm_linux_sigtramp_cache (this_frame, this_cache, func, | |
| ARM_SIGCONTEXT_R0); | |
| } | |
| static void | |
| arm_linux_rt_sigreturn_init (const struct tramp_frame *self, | |
| struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func) | |
| { | |
| CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM); | |
| ULONGEST pinfo = read_memory_unsigned_integer (sp, 4); | |
| if (pinfo == sp + ARM_OLD_RT_SIGFRAME_SIGINFO) | |
| arm_linux_sigtramp_cache (this_frame, this_cache, func, | |
| ARM_OLD_RT_SIGFRAME_UCONTEXT | |
| + ARM_UCONTEXT_SIGCONTEXT | |
| + ARM_SIGCONTEXT_R0); | |
| else | |
| arm_linux_sigtramp_cache (this_frame, this_cache, func, | |
| ARM_NEW_RT_SIGFRAME_UCONTEXT | |
| + ARM_UCONTEXT_SIGCONTEXT | |
| + ARM_SIGCONTEXT_R0); | |
| } | |
| static struct tramp_frame arm_linux_sigreturn_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { ARM_LINUX_SIGRETURN_INSTR, -1 }, | |
| { TRAMP_SENTINEL_INSN } | |
| }, | |
| arm_linux_sigreturn_init | |
| }; | |
| static struct tramp_frame arm_linux_rt_sigreturn_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { ARM_LINUX_RT_SIGRETURN_INSTR, -1 }, | |
| { TRAMP_SENTINEL_INSN } | |
| }, | |
| arm_linux_rt_sigreturn_init | |
| }; | |
| static struct tramp_frame arm_eabi_linux_sigreturn_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { ARM_SET_R7_SIGRETURN, -1 }, | |
| { ARM_EABI_SYSCALL, -1 }, | |
| { TRAMP_SENTINEL_INSN } | |
| }, | |
| arm_linux_sigreturn_init | |
| }; | |
| static struct tramp_frame arm_eabi_linux_rt_sigreturn_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { ARM_SET_R7_RT_SIGRETURN, -1 }, | |
| { ARM_EABI_SYSCALL, -1 }, | |
| { TRAMP_SENTINEL_INSN } | |
| }, | |
| arm_linux_rt_sigreturn_init | |
| }; | |
| /* Core file and register set support. */ | |
| #define ARM_LINUX_SIZEOF_GREGSET (18 * INT_REGISTER_SIZE) | |
| void | |
| arm_linux_supply_gregset (const struct regset *regset, | |
| struct regcache *regcache, | |
| int regnum, const void *gregs_buf, size_t len) | |
| { | |
| const gdb_byte *gregs = gregs_buf; | |
| int regno; | |
| CORE_ADDR reg_pc; | |
| gdb_byte pc_buf[INT_REGISTER_SIZE]; | |
| for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++) | |
| if (regnum == -1 || regnum == regno) | |
| regcache_raw_supply (regcache, regno, | |
| gregs + INT_REGISTER_SIZE * regno); | |
| if (regnum == ARM_PS_REGNUM || regnum == -1) | |
| { | |
| if (arm_apcs_32) | |
| regcache_raw_supply (regcache, ARM_PS_REGNUM, | |
| gregs + INT_REGISTER_SIZE * ARM_CPSR_REGNUM); | |
| else | |
| regcache_raw_supply (regcache, ARM_PS_REGNUM, | |
| gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM); | |
| } | |
| if (regnum == ARM_PC_REGNUM || regnum == -1) | |
| { | |
| reg_pc = extract_unsigned_integer (gregs | |
| + INT_REGISTER_SIZE * ARM_PC_REGNUM, | |
| INT_REGISTER_SIZE); | |
| reg_pc = gdbarch_addr_bits_remove (get_regcache_arch (regcache), reg_pc); | |
| store_unsigned_integer (pc_buf, INT_REGISTER_SIZE, reg_pc); | |
| regcache_raw_supply (regcache, ARM_PC_REGNUM, pc_buf); | |
| } | |
| } | |
| void | |
| arm_linux_collect_gregset (const struct regset *regset, | |
| const struct regcache *regcache, | |
| int regnum, void *gregs_buf, size_t len) | |
| { | |
| gdb_byte *gregs = gregs_buf; | |
| int regno; | |
| for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++) | |
| if (regnum == -1 || regnum == regno) | |
| regcache_raw_collect (regcache, regno, | |
| gregs + INT_REGISTER_SIZE * regno); | |
| if (regnum == ARM_PS_REGNUM || regnum == -1) | |
| { | |
| if (arm_apcs_32) | |
| regcache_raw_collect (regcache, ARM_PS_REGNUM, | |
| gregs + INT_REGISTER_SIZE * ARM_CPSR_REGNUM); | |
| else | |
| regcache_raw_collect (regcache, ARM_PS_REGNUM, | |
| gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM); | |
| } | |
| if (regnum == ARM_PC_REGNUM || regnum == -1) | |
| regcache_raw_collect (regcache, ARM_PC_REGNUM, | |
| gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM); | |
| } | |
| /* Support for register format used by the NWFPE FPA emulator. */ | |
| #define typeNone 0x00 | |
| #define typeSingle 0x01 | |
| #define typeDouble 0x02 | |
| #define typeExtended 0x03 | |
| void | |
| supply_nwfpe_register (struct regcache *regcache, int regno, | |
| const gdb_byte *regs) | |
| { | |
| const gdb_byte *reg_data; | |
| gdb_byte reg_tag; | |
| gdb_byte buf[FP_REGISTER_SIZE]; | |
| reg_data = regs + (regno - ARM_F0_REGNUM) * FP_REGISTER_SIZE; | |
| reg_tag = regs[(regno - ARM_F0_REGNUM) + NWFPE_TAGS_OFFSET]; | |
| memset (buf, 0, FP_REGISTER_SIZE); | |
| switch (reg_tag) | |
| { | |
| case typeSingle: | |
| memcpy (buf, reg_data, 4); | |
| break; | |
| case typeDouble: | |
| memcpy (buf, reg_data + 4, 4); | |
| memcpy (buf + 4, reg_data, 4); | |
| break; | |
| case typeExtended: | |
| /* We want sign and exponent, then least significant bits, | |
| then most significant. NWFPE does sign, most, least. */ | |
| memcpy (buf, reg_data, 4); | |
| memcpy (buf + 4, reg_data + 8, 4); | |
| memcpy (buf + 8, reg_data + 4, 4); | |
| break; | |
| default: | |
| break; | |
| } | |
| regcache_raw_supply (regcache, regno, buf); | |
| } | |
| void | |
| collect_nwfpe_register (const struct regcache *regcache, int regno, | |
| gdb_byte *regs) | |
| { | |
| gdb_byte *reg_data; | |
| gdb_byte reg_tag; | |
| gdb_byte buf[FP_REGISTER_SIZE]; | |
| regcache_raw_collect (regcache, regno, buf); | |
| /* NOTE drow/2006-06-07: This code uses the tag already in the | |
| register buffer. I've preserved that when moving the code | |
| from the native file to the target file. But this doesn't | |
| always make sense. */ | |
| reg_data = regs + (regno - ARM_F0_REGNUM) * FP_REGISTER_SIZE; | |
| reg_tag = regs[(regno - ARM_F0_REGNUM) + NWFPE_TAGS_OFFSET]; | |
| switch (reg_tag) | |
| { | |
| case typeSingle: | |
| memcpy (reg_data, buf, 4); | |
| break; | |
| case typeDouble: | |
| memcpy (reg_data, buf + 4, 4); | |
| memcpy (reg_data + 4, buf, 4); | |
| break; | |
| case typeExtended: | |
| memcpy (reg_data, buf, 4); | |
| memcpy (reg_data + 4, buf + 8, 4); | |
| memcpy (reg_data + 8, buf + 4, 4); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| void | |
| arm_linux_supply_nwfpe (const struct regset *regset, | |
| struct regcache *regcache, | |
| int regnum, const void *regs_buf, size_t len) | |
| { | |
| const gdb_byte *regs = regs_buf; | |
| int regno; | |
| if (regnum == ARM_FPS_REGNUM || regnum == -1) | |
| regcache_raw_supply (regcache, ARM_FPS_REGNUM, | |
| regs + NWFPE_FPSR_OFFSET); | |
| for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++) | |
| if (regnum == -1 || regnum == regno) | |
| supply_nwfpe_register (regcache, regno, regs); | |
| } | |
| void | |
| arm_linux_collect_nwfpe (const struct regset *regset, | |
| const struct regcache *regcache, | |
| int regnum, void *regs_buf, size_t len) | |
| { | |
| gdb_byte *regs = regs_buf; | |
| int regno; | |
| for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++) | |
| if (regnum == -1 || regnum == regno) | |
| collect_nwfpe_register (regcache, regno, regs); | |
| if (regnum == ARM_FPS_REGNUM || regnum == -1) | |
| regcache_raw_collect (regcache, ARM_FPS_REGNUM, | |
| regs + INT_REGISTER_SIZE * ARM_FPS_REGNUM); | |
| } | |
| /* Return the appropriate register set for the core section identified | |
| by SECT_NAME and SECT_SIZE. */ | |
| static const struct regset * | |
| arm_linux_regset_from_core_section (struct gdbarch *gdbarch, | |
| const char *sect_name, size_t sect_size) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| if (strcmp (sect_name, ".reg") == 0 | |
| && sect_size == ARM_LINUX_SIZEOF_GREGSET) | |
| { | |
| if (tdep->gregset == NULL) | |
| tdep->gregset = regset_alloc (gdbarch, arm_linux_supply_gregset, | |
| arm_linux_collect_gregset); | |
| return tdep->gregset; | |
| } | |
| if (strcmp (sect_name, ".reg2") == 0 | |
| && sect_size == ARM_LINUX_SIZEOF_NWFPE) | |
| { | |
| if (tdep->fpregset == NULL) | |
| tdep->fpregset = regset_alloc (gdbarch, arm_linux_supply_nwfpe, | |
| arm_linux_collect_nwfpe); | |
| return tdep->fpregset; | |
| } | |
| return NULL; | |
| } | |
| /* Insert a single step breakpoint at the next executed instruction. */ | |
| int | |
| arm_linux_software_single_step (struct frame_info *frame) | |
| { | |
| CORE_ADDR next_pc = arm_get_next_pc (frame, get_frame_pc (frame)); | |
| /* The Linux kernel offers some user-mode helpers in a high page. We can | |
| not read this page (as of 2.6.23), and even if we could then we couldn't | |
| set breakpoints in it, and even if we could then the atomic operations | |
| would fail when interrupted. They are all called as functions and return | |
| to the address in LR, so step to there instead. */ | |
| if (next_pc > 0xffff0000) | |
| next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM); | |
| insert_single_step_breakpoint (next_pc); | |
| return 1; | |
| } | |
| static void | |
| arm_linux_init_abi (struct gdbarch_info info, | |
| struct gdbarch *gdbarch) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| tdep->lowest_pc = 0x8000; | |
| if (info.byte_order == BFD_ENDIAN_BIG) | |
| { | |
| if (tdep->arm_abi == ARM_ABI_AAPCS) | |
| tdep->arm_breakpoint = eabi_linux_arm_be_breakpoint; | |
| else | |
| tdep->arm_breakpoint = arm_linux_arm_be_breakpoint; | |
| tdep->thumb_breakpoint = arm_linux_thumb_be_breakpoint; | |
| } | |
| else | |
| { | |
| if (tdep->arm_abi == ARM_ABI_AAPCS) | |
| tdep->arm_breakpoint = eabi_linux_arm_le_breakpoint; | |
| else | |
| tdep->arm_breakpoint = arm_linux_arm_le_breakpoint; | |
| tdep->thumb_breakpoint = arm_linux_thumb_le_breakpoint; | |
| } | |
| tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint); | |
| tdep->thumb_breakpoint_size = sizeof (arm_linux_thumb_le_breakpoint); | |
| if (tdep->fp_model == ARM_FLOAT_AUTO) | |
| tdep->fp_model = ARM_FLOAT_FPA; | |
| tdep->jb_pc = ARM_LINUX_JB_PC; | |
| tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE; | |
| set_solib_svr4_fetch_link_map_offsets | |
| (gdbarch, svr4_ilp32_fetch_link_map_offsets); | |
| /* Single stepping. */ | |
| set_gdbarch_software_single_step (gdbarch, arm_linux_software_single_step); | |
| /* Shared library handling. */ | |
| set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); | |
| set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); | |
| /* Enable TLS support. */ | |
| set_gdbarch_fetch_tls_load_module_address (gdbarch, | |
| svr4_fetch_objfile_link_map); | |
| tramp_frame_prepend_unwinder (gdbarch, | |
| &arm_linux_sigreturn_tramp_frame); | |
| tramp_frame_prepend_unwinder (gdbarch, | |
| &arm_linux_rt_sigreturn_tramp_frame); | |
| tramp_frame_prepend_unwinder (gdbarch, | |
| &arm_eabi_linux_sigreturn_tramp_frame); | |
| tramp_frame_prepend_unwinder (gdbarch, | |
| &arm_eabi_linux_rt_sigreturn_tramp_frame); | |
| /* Core file support. */ | |
| set_gdbarch_regset_from_core_section (gdbarch, | |
| arm_linux_regset_from_core_section); | |
| } | |
| void | |
| _initialize_arm_linux_tdep (void) | |
| { | |
| gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_LINUX, | |
| arm_linux_init_abi); | |
| } |