| ##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003, | |
| ##2007, 2008 Free Software Foundation, Inc. | |
| # Makefile for GDB documentation. | |
| # This file is part of GDB. | |
| # This program is free software; you can redistribute it and/or modify | |
| # it under the terms of the GNU General Public License as published by | |
| # the Free Software Foundation; either version 2 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # This program is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| # GNU General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with this program; if not, write to the Free Software | |
| # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. | |
| srcdir = @srcdir@ | |
| VPATH = @srcdir@ | |
| prefix = @prefix@ | |
| infodir = @infodir@ | |
| pdfdir = $(prefix)/share/doc/gdb | |
| htmldir = $(prefix)/html | |
| SHELL = @SHELL@ | |
| LN_S = @LN_S@ | |
| INSTALL = @INSTALL@ | |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ | |
| INSTALL_DATA = @INSTALL_DATA@ | |
| mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs | |
| # main GDB source directory | |
| gdbdir = $(srcdir)/.. | |
| # where to find texinfo; GDB dist should include a recent one | |
| TEXIDIR=${gdbdir}/../texinfo | |
| # where to find makeinfo, preferably one designed for texinfo-2 | |
| MAKEINFO=makeinfo | |
| # Note that texinfo 4.0's makeinfo --html can only generate a | |
| # single file, which would be too large, so continue to use | |
| # texi2html. -sts 2000-03-28 | |
| # Contrary to documentation, the current directory is not | |
| # searched by texi2html, so specify it explicitly. | |
| # -macro 2007-07-26 | |
| MAKEHTML = texi2html | |
| MAKEHTMLFLAGS = -menu -split_chapter -I . | |
| # where to find texi2roff, ditto | |
| TEXI2ROFF=texi2roff | |
| # where to find texi2dvi, ditto | |
| TEXI2DVI=texi2dvi | |
| # Package version and bug-reporting URL. | |
| PKGVERSION = @PKGVERSION@ | |
| BUGURL_TEXI = @REPORT_BUGS_TEXI@ | |
| # Where is the source dir for the READLINE library doc? | |
| # Traditionally readline is in .. or . | |
| READLINE_DIR = ${gdbdir}/../readline/doc | |
| # The GDB/MI docs come from a sibling directory ../mi | |
| GDBMI_DIR = ${gdbdir}/mi | |
| SET_TEXINPUTS = \ | |
| TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS | |
| # Files which should be generated via 'info' and installed by 'install-info' | |
| INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info | |
| # Files which should be generated via 'pdf' and installed by 'install-pdf' | |
| PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf | |
| # There may be alternate predefined collections of switches to configure | |
| # the GDB manual. Normally this is not done in synch with the software | |
| # config system, since this choice tends to be independent; most people | |
| # want a doc config of `all' for a generic manual, regardless of sw config. | |
| DOC_CONFIG = all | |
| # This list of sed edits will edit the GDB reference card | |
| # for what fonts and what papersize to use. | |
| # By default (NO edits applied), the refcard uses: | |
| # - Computer Modern (CM) fonts | |
| # - US letter paper (8.5x11in) | |
| # List some of the following files for alternative fonts and paper: | |
| # a4rc.sed use A4 paper (297 x 210 mm) | |
| # psrc.sed use PostScript fonts (Karl Berry short TeX names) | |
| # lpsrc.sed use PostScript fonts (full PostScript names in TeX) | |
| # e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed | |
| # for A4, CM fonts: REFEDITS = a4rc.sed | |
| # for US, PS fonts: REFEDITS = psrc.sed | |
| # for default: | |
| REFEDITS = | |
| # Don Knuth's TeX formatter | |
| TEX = tex | |
| PDFTEX = pdftex | |
| # Program to generate Postscript files from DVI files. | |
| DVIPS = dvips | |
| # Main GDB manual | |
| GDB_DOC_SOURCE_INCLUDES = \ | |
| $(srcdir)/fdl.texi \ | |
| $(srcdir)/gpl.texi \ | |
| $(srcdir)/agentexpr.texi \ | |
| $(READLINE_DIR)/rluser.texi \ | |
| $(READLINE_DIR)/inc-hist.texinfo | |
| GDB_DOC_BUILD_INCLUDES = \ | |
| gdb-cfg.texi \ | |
| GDBvn.texi | |
| GDB_DOC_FILES = \ | |
| $(srcdir)/gdb.texinfo \ | |
| $(GDB_DOC_SOURCE_INCLUDES) \ | |
| $(GDB_DOC_BUILD_INCLUDES) | |
| # Internals Manual | |
| GDBINT_DOC_SOURCE_INCLUDES = \ | |
| $(srcdir)/fdl.texi \ | |
| $(srcdir)/observer.texi | |
| GDBINT_DOC_BUILD_INCLUDES = \ | |
| gdb-cfg.texi \ | |
| GDBvn.texi | |
| GDBINT_DOC_FILES = \ | |
| $(srcdir)/gdbint.texinfo \ | |
| $(GDBINT_DOC_SOURCE_INCLUDES) \ | |
| $(GDBINT_DOC_BUILD_INCLUDES) | |
| # Stabs manual: All files | |
| STABS_DOC_SOURCE_INCLUDES = \ | |
| $(srcdir)/fdl.texi | |
| STABS_DOC_BUILD_INCLUDES = | |
| STABS_DOC_FILES = \ | |
| $(srcdir)/stabs.texinfo \ | |
| $(STABS_DOC_SOURCE_INCLUDES) \ | |
| $(STABS_DOC_BUILD_INCLUDES) | |
| # Annotate migration document | |
| ANNOTATE_DOC_SOURCE_INCLUDES = \ | |
| $(srcdir)/fdl.texi | |
| ANNOTATE_DOC_BUILD_INCLUDES = \ | |
| gdb-cfg.texi | |
| ANNOTATE_DOC_FILES = \ | |
| $(srcdir)/annotate.texinfo \ | |
| $(ANNOTATE_DOC_SOURCE_INCLUDES) \ | |
| $(ANNOTATE_DOC_BUILD_INCLUDES) | |
| #### Host, target, and site specific Makefile fragments come in here. | |
| ### | |
| all: | |
| info: $(INFO_DEPS) | |
| dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi | |
| ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps | |
| html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html | |
| pdf: $(PDFFILES) | |
| all-doc: info dvi ps # pdf | |
| diststuff: info | |
| install-info: $(INFO_DEPS) | |
| $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir) | |
| @list='$(INFO_DEPS)'; \ | |
| for file in $$list; do \ | |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ | |
| for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \ | |
| if test -f $$d/$$ifile; then \ | |
| echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \ | |
| $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \ | |
| else : ; fi; \ | |
| done; \ | |
| done | |
| $(POST_INSTALL) | |
| @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ | |
| list='$(INFO_DEPS)'; \ | |
| for file in $$list; do \ | |
| echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\ | |
| install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\ | |
| done; \ | |
| else : ; fi | |
| uninstall-info: | |
| $(PRE_UNINSTALL) | |
| @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ | |
| ii=yes; \ | |
| else ii=; fi; \ | |
| list='$(INFO_DEPS)'; \ | |
| for file in $$list; do \ | |
| test -z "$$ii" \ | |
| || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \ | |
| done | |
| $(NORMAL_UNINSTALL) | |
| list='$(INFO_DEPS)'; \ | |
| for file in $$list; do \ | |
| (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \ | |
| done | |
| install-html: html | |
| for i in *.html ; do \ | |
| $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \ | |
| done | |
| pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`; | |
| install-pdf: $(PDFFILES) | |
| @$(NORMAL_INSTALL) | |
| test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)" | |
| @list='$(PDFFILES)'; for p in $$list; do \ | |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |
| f=$(pdf__strip_dir) \ | |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \ | |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \ | |
| done | |
| STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf | |
| # Copy the object files from a particular stage into a subdirectory. | |
| stage1: force | |
| -mkdir stage1 | |
| -mv $(STAGESTUFF) stage1 | |
| stage2: force | |
| -mkdir stage2 | |
| -mv $(STAGESTUFF) stage2 | |
| stage3: force | |
| -mkdir stage3 | |
| -mv $(STAGESTUFF) stage3 | |
| against=stage2 | |
| comparison: force | |
| for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done | |
| de-stage1: force | |
| -(cd stage1 ; mv -f * ..) | |
| -rmdir stage1 | |
| de-stage2: force | |
| -(cd stage2 ; mv -f * ..) | |
| -rmdir stage2 | |
| de-stage3: force | |
| -(cd stage3 ; mv -f * ..) | |
| -rmdir stage3 | |
| # GDB QUICK REFERENCE (dvi output) | |
| refcard.dvi : refcard.tex $(REFEDITS) | |
| echo > tmp.sed | |
| for f in x $(REFEDITS) ; do \ | |
| test x$$f = xx && continue ; \ | |
| cat $(srcdir)/$$f >>tmp.sed ; \ | |
| done | |
| sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex | |
| $(SET_TEXINPUTS) $(TEX) sedref.tex | |
| mv sedref.dvi refcard.dvi | |
| rm -f sedref.log sedref.tex tmp.sed | |
| refcard.ps : refcard.dvi | |
| $(DVIPS) -t landscape -o $@ $? | |
| refcard.pdf : refcard.tex $(REFEDITS) | |
| echo > tmp.sed | |
| for f in x $(REFEDITS) ; do \ | |
| test x$$f = xx && continue ; \ | |
| cat $(srcdir)/$$f >>tmp.sed ; \ | |
| done | |
| sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex | |
| $(SET_TEXINPUTS) $(PDFTEX) sedref.tex | |
| mv sedref.pdf refcard.pdf | |
| rm -f sedref.log sedref.tex tmp.sed | |
| # File to record current GDB version number (copied from main dir version.in) | |
| GDBvn.texi : ${gdbdir}/version.in | |
| echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new | |
| if [ -n "$(PKGVERSION)" ]; then \ | |
| echo "@set VERSION_PACKAGE $(PKGVERSION)" >> ./GDBvn.new; \ | |
| fi | |
| echo "@set BUGURL $(BUGURL_TEXI)" >> ./GDBvn.new | |
| if [ "$(BUGURL_TEXI)" = "@uref{http://www.gnu.org/software/gdb/bugs/}" ]; then \ | |
| echo "@set BUGURL_DEFAULT" >> ./GDBvn.new; \ | |
| fi | |
| mv GDBvn.new GDBvn.texi | |
| # Updated atomically | |
| .PRECIOUS: GDBvn.texi | |
| # Choose configuration for GDB manual (normally `all'; normally not tied into | |
| # `configure' script because most users prefer generic version of manual, | |
| # not one for their binary config---which may not be specifically | |
| # defined anyways). | |
| gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi | |
| (test "$(LN_S)" = "ln -s" && \ | |
| ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \ | |
| ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \ | |
| cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi | |
| # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear | |
| # If your texinfo or makeinfo don't support these, get a new texinfo release | |
| # | |
| # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make. | |
| # Note that we can *generate* GDBvn.texi, but since we distribute one in the | |
| # source directory for the benefit of people who *don't* use this makefile, | |
| # VPATH will often tell make not to bother building it, because the one | |
| # in the srcdir is up to date. (if not, then make should build one here). | |
| # Clean these up before each run. Avoids a catch 22 with not being | |
| # able to re-generate these files (to fix a corruption) because these | |
| # files contain a corruption. | |
| GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \ | |
| gdb.tp* gdb.vr* | |
| # GDB MANUAL: TeX dvi file | |
| gdb.dvi: ${GDB_DOC_FILES} | |
| if [ ! -f ./GDBvn.texi ]; then \ | |
| (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \ | |
| ln $(srcdir)/GDBvn.texi . || \ | |
| cp $(srcdir)/GDBvn.texi . ; else true; fi | |
| rm -f $(GDB_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo | |
| gdb.ps: gdb.dvi | |
| $(DVIPS) -o $@ $? | |
| gdb.pdf: ${GDB_DOC_FILES} | |
| if [ ! -f ./GDBvn.texi ]; then \ | |
| (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \ | |
| ln $(srcdir)/GDBvn.texi . || \ | |
| cp $(srcdir)/GDBvn.texi . ; else true; fi | |
| rm -f $(GDB_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo | |
| # GDB MANUAL: info file | |
| gdb.info: ${GDB_DOC_FILES} | |
| $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \ | |
| -o gdb.info $(srcdir)/gdb.texinfo | |
| # GDB MANUAL: roff translations | |
| # Try to use a recent texi2roff. v2 was put on prep in jan91. | |
| # If you want an index, see texi2roff doc for postprocessing | |
| # and add -i to texi2roff invocations below. | |
| # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete | |
| # corresponding -e lines when later texi2roff's are current) | |
| # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs. | |
| # + @c's deleted explicitly because texi2roff sees texinfo commands in them | |
| # + @ (that's at-BLANK) not recognized by texi2roff, turned into blank | |
| # + @alphaenumerate is ridiculously new, turned into @enumerate | |
| # texi2roff doesn't have a notion of include dirs, so we have to fake | |
| # it out for gdb manual's include files---but only if not configured | |
| # in main sourcedir. | |
| links2roff: $(GDB_DOC_SOURCE_INCLUDES) | |
| if [ ! -f gdb.texinfo ]; then \ | |
| (test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \ | |
| ln $(GDB_DOC_SOURCE_INCLUDES) . || \ | |
| cp $(GDB_DOC_SOURCE_INCLUDES) . ; \ | |
| fi | |
| touch links2roff | |
| # gdb manual suitable for [gtn]roff -me | |
| gdb.me: $(GDB_DOC_FILES) links2roff | |
| sed -e '/\\input texinfo/d' \ | |
| -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ | |
| -e '/^@ifinfo/,/^@end ifinfo/d' \ | |
| -e '/^@c /d' \ | |
| -e 's/{.*,,/{/' \ | |
| -e 's/@ / /g' \ | |
| -e 's/^@alphaenumerate/@enumerate/g' \ | |
| -e 's/^@end alphaenumerate/@end enumerate/g' \ | |
| $(srcdir)/gdb.texinfo | \ | |
| $(TEXI2ROFF) -me | \ | |
| sed -e 's/---/\\(em/g' \ | |
| >gdb.me | |
| # gdb manual suitable for [gtn]roff -ms | |
| gdb.ms: $(GDB_DOC_FILES) links2roff | |
| sed -e '/\\input texinfo/d' \ | |
| -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ | |
| -e '/^@ifinfo/,/^@end ifinfo/d' \ | |
| -e '/^@c /d' \ | |
| -e 's/{.*,,/{/' \ | |
| -e 's/@ / /g' \ | |
| -e 's/^@alphaenumerate/@enumerate/g' \ | |
| -e 's/^@end alphaenumerate/@end enumerate/g' \ | |
| $(srcdir)/gdb.texinfo | \ | |
| $(TEXI2ROFF) -ms | \ | |
| sed -e 's/---/\\(em/g' \ | |
| >gdb.ms | |
| # gdb manual suitable for [tn]roff -mm | |
| # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, | |
| # try leaving them in | |
| gdb.mm: $(GDB_DOC_FILES) links2roff | |
| sed -e '/\\input texinfo/d' \ | |
| -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ | |
| -e '/^@ifinfo/,/^@end ifinfo/d' \ | |
| -e '/^@c /d' \ | |
| -e 's/{.*,,/{/' \ | |
| -e '/@noindent/d' \ | |
| -e 's/@ / /g' \ | |
| -e 's/^@alphaenumerate/@enumerate/g' \ | |
| -e 's/^@end alphaenumerate/@end enumerate/g' \ | |
| $(srcdir)/gdb.texinfo | \ | |
| $(TEXI2ROFF) -mm | \ | |
| sed -e 's/---/\\(em/g' \ | |
| >gdb.mm | |
| # GDB MANUAL: HTML file | |
| gdb_toc.html: ${GDB_DOC_FILES} | |
| $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo | |
| # Clean these up before each run. Avoids a catch 22 with not being | |
| # able to re-generate these files (to fix a corruption) because these | |
| # files contain a corruption. | |
| GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \ | |
| gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr* | |
| # GDB INTERNALS MANUAL: TeX dvi file | |
| gdbint.dvi: $(GDBINT_DOC_FILES) | |
| rm -f $(GDBINT_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo | |
| gdbint.ps : gdbint.dvi | |
| $(DVIPS) -o $@ $? | |
| gdbint.pdf: $(GDBINT_DOC_FILES) | |
| rm -f $(GDBINT_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo | |
| # GDB INTERNALS MANUAL: info file | |
| gdbint.info: $(GDBINT_DOC_FILES) | |
| $(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo | |
| # GDB INTERNALS MANUAL: HTML file | |
| gdbint_toc.html: $(GDBINT_DOC_FILES) | |
| $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo | |
| stabs.info: $(STABS_DOC_FILES) | |
| $(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo | |
| # STABS DOCUMENTATION: HTML file | |
| stabs_toc.html: $(STABS_DOC_FILES) | |
| $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo | |
| # Clean these up before each run. Avoids a catch 22 with not being | |
| # able to re-generate these files (to fix a corruption) because these | |
| # files contain a corruption. | |
| STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \ | |
| stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr* | |
| # STABS DOCUMENTATION: TeX dvi file | |
| stabs.dvi : $(STABS_DOC_FILES) | |
| rm -f $(STABS_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo | |
| stabs.ps: stabs.dvi | |
| $(DVIPS) -o $@ $? | |
| stabs.pdf: $(STABS_DOC_FILES) | |
| rm -f $(STABS_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo | |
| # Clean these up before each run. Avoids a catch 22 with not being | |
| # able to re-generate these files (to fix a corruption) because these | |
| # files contain a corruption. | |
| ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \ | |
| annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr* | |
| # ANNOTATE DOCUMENTATION: TeX dvi file | |
| annotate.dvi : $(ANNOTATE_DOC_FILES) | |
| rm -f $(ANNOTATE_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo | |
| annotate.ps: annotate.dvi | |
| $(DVIPS) -o $@ $? | |
| annotate.pdf: $(ANNOTATE_DOC_FILES) | |
| rm -f $(ANNOTATE_TEX_TMPS) | |
| $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo | |
| annotate.info: $(ANNOTATE_DOC_FILES) | |
| $(MAKEINFO) -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo | |
| annotate_toc.html: $(ANNOTATE_DOC_FILES) | |
| $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo | |
| force: | |
| Makefile: Makefile.in $(host_makefile_frag) config.status | |
| $(SHELL) ./config.status | |
| # The "least clean" level of cleaning. Get rid of files which are | |
| # automatically generated files that are just intermediate files, | |
| mostlyclean: | |
| rm -f gdb.mm gdb.ms gdb.me links2roff | |
| rm -f $(GDB_TEX_TMPS) | |
| rm -f $(GDBINT_TEX_TMPS) | |
| rm -f $(STABS_TEX_TMPS) | |
| rm -f $(ANNOTATE_TEX_TMPS) | |
| rm -f sedref.dvi sedref.tex tmp.sed | |
| clean: mostlyclean | |
| rm -f gdb-cfg.texi | |
| distclean: clean | |
| rm -f Makefile config.status config.log | |
| # GDBvn.texi, the dvi files, the info files, and the postscript files, | |
| # are all part of the distribution, so it should not be removed by | |
| # "clean" or "distclean". Use maintainer-clean to remove them. | |
| maintainer-clean realclean: distclean | |
| rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf | |
| install: install-info | |
| uninstall: uninstall-info |