| /* Floating point routines for GDB, the GNU debugger. | |
| Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, | |
| 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| /* Support for converting target fp numbers into host DOUBLEST format. */ | |
| /* XXX - This code should really be in libiberty/floatformat.c, | |
| however configuration issues with libiberty made this very | |
| difficult to do in the available time. */ | |
| #include "defs.h" | |
| #include "doublest.h" | |
| #include "floatformat.h" | |
| #include "gdb_assert.h" | |
| #include "gdb_string.h" | |
| #include "gdbtypes.h" | |
| #include <math.h> /* ldexp */ | |
| /* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not | |
| going to bother with trying to muck around with whether it is defined in | |
| a system header, what we do if not, etc. */ | |
| #define FLOATFORMAT_CHAR_BIT 8 | |
| /* The number of bytes that the largest floating-point type that we | |
| can convert to doublest will need. */ | |
| #define FLOATFORMAT_LARGEST_BYTES 16 | |
| /* Extract a field which starts at START and is LEN bytes long. DATA and | |
| TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */ | |
| static unsigned long | |
| get_field (const bfd_byte *data, enum floatformat_byteorders order, | |
| unsigned int total_len, unsigned int start, unsigned int len) | |
| { | |
| unsigned long result; | |
| unsigned int cur_byte; | |
| int cur_bitshift; | |
| /* Caller must byte-swap words before calling this routine. */ | |
| gdb_assert (order == floatformat_little || order == floatformat_big); | |
| /* Start at the least significant part of the field. */ | |
| if (order == floatformat_little) | |
| { | |
| /* We start counting from the other end (i.e, from the high bytes | |
| rather than the low bytes). As such, we need to be concerned | |
| with what happens if bit 0 doesn't start on a byte boundary. | |
| I.e, we need to properly handle the case where total_len is | |
| not evenly divisible by 8. So we compute ``excess'' which | |
| represents the number of bits from the end of our starting | |
| byte needed to get to bit 0. */ | |
| int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT); | |
| cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) | |
| - ((start + len + excess) / FLOATFORMAT_CHAR_BIT); | |
| cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT) | |
| - FLOATFORMAT_CHAR_BIT; | |
| } | |
| else | |
| { | |
| cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT; | |
| cur_bitshift = | |
| ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT; | |
| } | |
| if (cur_bitshift > -FLOATFORMAT_CHAR_BIT) | |
| result = *(data + cur_byte) >> (-cur_bitshift); | |
| else | |
| result = 0; | |
| cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
| if (order == floatformat_little) | |
| ++cur_byte; | |
| else | |
| --cur_byte; | |
| /* Move towards the most significant part of the field. */ | |
| while (cur_bitshift < len) | |
| { | |
| result |= (unsigned long)*(data + cur_byte) << cur_bitshift; | |
| cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
| switch (order) | |
| { | |
| case floatformat_little: | |
| ++cur_byte; | |
| break; | |
| case floatformat_big: | |
| --cur_byte; | |
| break; | |
| } | |
| } | |
| if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT) | |
| /* Mask out bits which are not part of the field */ | |
| result &= ((1UL << len) - 1); | |
| return result; | |
| } | |
| /* Normalize the byte order of FROM into TO. If no normalization is | |
| needed then FMT->byteorder is returned and TO is not changed; | |
| otherwise the format of the normalized form in TO is returned. */ | |
| static enum floatformat_byteorders | |
| floatformat_normalize_byteorder (const struct floatformat *fmt, | |
| const void *from, void *to) | |
| { | |
| const unsigned char *swapin; | |
| unsigned char *swapout; | |
| int words; | |
| if (fmt->byteorder == floatformat_little | |
| || fmt->byteorder == floatformat_big) | |
| return fmt->byteorder; | |
| words = fmt->totalsize / FLOATFORMAT_CHAR_BIT; | |
| words >>= 2; | |
| swapout = (unsigned char *)to; | |
| swapin = (const unsigned char *)from; | |
| if (fmt->byteorder == floatformat_vax) | |
| { | |
| while (words-- > 0) | |
| { | |
| *swapout++ = swapin[1]; | |
| *swapout++ = swapin[0]; | |
| *swapout++ = swapin[3]; | |
| *swapout++ = swapin[2]; | |
| swapin += 4; | |
| } | |
| /* This may look weird, since VAX is little-endian, but it is | |
| easier to translate to big-endian than to little-endian. */ | |
| return floatformat_big; | |
| } | |
| else | |
| { | |
| gdb_assert (fmt->byteorder == floatformat_littlebyte_bigword); | |
| while (words-- > 0) | |
| { | |
| *swapout++ = swapin[3]; | |
| *swapout++ = swapin[2]; | |
| *swapout++ = swapin[1]; | |
| *swapout++ = swapin[0]; | |
| swapin += 4; | |
| } | |
| return floatformat_big; | |
| } | |
| } | |
| /* Convert from FMT to a DOUBLEST. | |
| FROM is the address of the extended float. | |
| Store the DOUBLEST in *TO. */ | |
| static void | |
| convert_floatformat_to_doublest (const struct floatformat *fmt, | |
| const void *from, | |
| DOUBLEST *to) | |
| { | |
| unsigned char *ufrom = (unsigned char *) from; | |
| DOUBLEST dto; | |
| long exponent; | |
| unsigned long mant; | |
| unsigned int mant_bits, mant_off; | |
| int mant_bits_left; | |
| int special_exponent; /* It's a NaN, denorm or zero */ | |
| enum floatformat_byteorders order; | |
| unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
| enum float_kind kind; | |
| gdb_assert (fmt->totalsize | |
| <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
| /* For non-numbers, reuse libiberty's logic to find the correct | |
| format. We do not lose any precision in this case by passing | |
| through a double. */ | |
| kind = floatformat_classify (fmt, from); | |
| if (kind == float_infinite || kind == float_nan) | |
| { | |
| double dto; | |
| floatformat_to_double (fmt, from, &dto); | |
| *to = (DOUBLEST) dto; | |
| return; | |
| } | |
| order = floatformat_normalize_byteorder (fmt, ufrom, newfrom); | |
| if (order != fmt->byteorder) | |
| ufrom = newfrom; | |
| if (fmt->split_half) | |
| { | |
| DOUBLEST dtop, dbot; | |
| floatformat_to_doublest (fmt->split_half, ufrom, &dtop); | |
| /* Preserve the sign of 0, which is the sign of the top | |
| half. */ | |
| if (dtop == 0.0) | |
| { | |
| *to = dtop; | |
| return; | |
| } | |
| floatformat_to_doublest (fmt->split_half, | |
| ufrom + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2, | |
| &dbot); | |
| *to = dtop + dbot; | |
| return; | |
| } | |
| exponent = get_field (ufrom, order, fmt->totalsize, fmt->exp_start, | |
| fmt->exp_len); | |
| /* Note that if exponent indicates a NaN, we can't really do anything useful | |
| (not knowing if the host has NaN's, or how to build one). So it will | |
| end up as an infinity or something close; that is OK. */ | |
| mant_bits_left = fmt->man_len; | |
| mant_off = fmt->man_start; | |
| dto = 0.0; | |
| special_exponent = exponent == 0 || exponent == fmt->exp_nan; | |
| /* Don't bias NaNs. Use minimum exponent for denorms. For simplicity, | |
| we don't check for zero as the exponent doesn't matter. Note the cast | |
| to int; exp_bias is unsigned, so it's important to make sure the | |
| operation is done in signed arithmetic. */ | |
| if (!special_exponent) | |
| exponent -= fmt->exp_bias; | |
| else if (exponent == 0) | |
| exponent = 1 - fmt->exp_bias; | |
| /* Build the result algebraically. Might go infinite, underflow, etc; | |
| who cares. */ | |
| /* If this format uses a hidden bit, explicitly add it in now. Otherwise, | |
| increment the exponent by one to account for the integer bit. */ | |
| if (!special_exponent) | |
| { | |
| if (fmt->intbit == floatformat_intbit_no) | |
| dto = ldexp (1.0, exponent); | |
| else | |
| exponent++; | |
| } | |
| while (mant_bits_left > 0) | |
| { | |
| mant_bits = min (mant_bits_left, 32); | |
| mant = get_field (ufrom, order, fmt->totalsize, mant_off, mant_bits); | |
| dto += ldexp ((double) mant, exponent - mant_bits); | |
| exponent -= mant_bits; | |
| mant_off += mant_bits; | |
| mant_bits_left -= mant_bits; | |
| } | |
| /* Negate it if negative. */ | |
| if (get_field (ufrom, order, fmt->totalsize, fmt->sign_start, 1)) | |
| dto = -dto; | |
| *to = dto; | |
| } | |
| static void put_field (unsigned char *, enum floatformat_byteorders, | |
| unsigned int, | |
| unsigned int, unsigned int, unsigned long); | |
| /* Set a field which starts at START and is LEN bytes long. DATA and | |
| TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */ | |
| static void | |
| put_field (unsigned char *data, enum floatformat_byteorders order, | |
| unsigned int total_len, unsigned int start, unsigned int len, | |
| unsigned long stuff_to_put) | |
| { | |
| unsigned int cur_byte; | |
| int cur_bitshift; | |
| /* Caller must byte-swap words before calling this routine. */ | |
| gdb_assert (order == floatformat_little || order == floatformat_big); | |
| /* Start at the least significant part of the field. */ | |
| if (order == floatformat_little) | |
| { | |
| int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT); | |
| cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) | |
| - ((start + len + excess) / FLOATFORMAT_CHAR_BIT); | |
| cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT) | |
| - FLOATFORMAT_CHAR_BIT; | |
| } | |
| else | |
| { | |
| cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT; | |
| cur_bitshift = | |
| ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT; | |
| } | |
| if (cur_bitshift > -FLOATFORMAT_CHAR_BIT) | |
| { | |
| *(data + cur_byte) &= | |
| ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1) | |
| << (-cur_bitshift)); | |
| *(data + cur_byte) |= | |
| (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift); | |
| } | |
| cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
| if (order == floatformat_little) | |
| ++cur_byte; | |
| else | |
| --cur_byte; | |
| /* Move towards the most significant part of the field. */ | |
| while (cur_bitshift < len) | |
| { | |
| if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT) | |
| { | |
| /* This is the last byte. */ | |
| *(data + cur_byte) &= | |
| ~((1 << (len - cur_bitshift)) - 1); | |
| *(data + cur_byte) |= (stuff_to_put >> cur_bitshift); | |
| } | |
| else | |
| *(data + cur_byte) = ((stuff_to_put >> cur_bitshift) | |
| & ((1 << FLOATFORMAT_CHAR_BIT) - 1)); | |
| cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
| if (order == floatformat_little) | |
| ++cur_byte; | |
| else | |
| --cur_byte; | |
| } | |
| } | |
| #ifdef HAVE_LONG_DOUBLE | |
| /* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR. | |
| The range of the returned value is >= 0.5 and < 1.0. This is equivalent to | |
| frexp, but operates on the long double data type. */ | |
| static long double ldfrexp (long double value, int *eptr); | |
| static long double | |
| ldfrexp (long double value, int *eptr) | |
| { | |
| long double tmp; | |
| int exp; | |
| /* Unfortunately, there are no portable functions for extracting the exponent | |
| of a long double, so we have to do it iteratively by multiplying or dividing | |
| by two until the fraction is between 0.5 and 1.0. */ | |
| if (value < 0.0l) | |
| value = -value; | |
| tmp = 1.0l; | |
| exp = 0; | |
| if (value >= tmp) /* Value >= 1.0 */ | |
| while (value >= tmp) | |
| { | |
| tmp *= 2.0l; | |
| exp++; | |
| } | |
| else if (value != 0.0l) /* Value < 1.0 and > 0.0 */ | |
| { | |
| while (value < tmp) | |
| { | |
| tmp /= 2.0l; | |
| exp--; | |
| } | |
| tmp *= 2.0l; | |
| exp++; | |
| } | |
| *eptr = exp; | |
| return value / tmp; | |
| } | |
| #endif /* HAVE_LONG_DOUBLE */ | |
| /* The converse: convert the DOUBLEST *FROM to an extended float and | |
| store where TO points. Neither FROM nor TO have any alignment | |
| restrictions. */ | |
| static void | |
| convert_doublest_to_floatformat (CONST struct floatformat *fmt, | |
| const DOUBLEST *from, void *to) | |
| { | |
| DOUBLEST dfrom; | |
| int exponent; | |
| DOUBLEST mant; | |
| unsigned int mant_bits, mant_off; | |
| int mant_bits_left; | |
| unsigned char *uto = (unsigned char *) to; | |
| enum floatformat_byteorders order = fmt->byteorder; | |
| unsigned char newto[FLOATFORMAT_LARGEST_BYTES]; | |
| if (order != floatformat_little) | |
| order = floatformat_big; | |
| if (order != fmt->byteorder) | |
| uto = newto; | |
| memcpy (&dfrom, from, sizeof (dfrom)); | |
| memset (uto, 0, (fmt->totalsize + FLOATFORMAT_CHAR_BIT - 1) | |
| / FLOATFORMAT_CHAR_BIT); | |
| if (fmt->split_half) | |
| { | |
| /* Use static volatile to ensure that any excess precision is | |
| removed via storing in memory, and so the top half really is | |
| the result of converting to double. */ | |
| static volatile double dtop, dbot; | |
| DOUBLEST dtopnv, dbotnv; | |
| dtop = (double) dfrom; | |
| /* If the rounded top half is Inf, the bottom must be 0 not NaN | |
| or Inf. */ | |
| if (dtop + dtop == dtop && dtop != 0.0) | |
| dbot = 0.0; | |
| else | |
| dbot = (double) (dfrom - (DOUBLEST) dtop); | |
| dtopnv = dtop; | |
| dbotnv = dbot; | |
| floatformat_from_doublest (fmt->split_half, &dtopnv, uto); | |
| floatformat_from_doublest (fmt->split_half, &dbotnv, | |
| (uto | |
| + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2)); | |
| return; | |
| } | |
| if (dfrom == 0) | |
| return; /* Result is zero */ | |
| if (dfrom != dfrom) /* Result is NaN */ | |
| { | |
| /* From is NaN */ | |
| put_field (uto, order, fmt->totalsize, fmt->exp_start, | |
| fmt->exp_len, fmt->exp_nan); | |
| /* Be sure it's not infinity, but NaN value is irrel */ | |
| put_field (uto, order, fmt->totalsize, fmt->man_start, | |
| 32, 1); | |
| goto finalize_byteorder; | |
| } | |
| /* If negative, set the sign bit. */ | |
| if (dfrom < 0) | |
| { | |
| put_field (uto, order, fmt->totalsize, fmt->sign_start, 1, 1); | |
| dfrom = -dfrom; | |
| } | |
| if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity */ | |
| { | |
| /* Infinity exponent is same as NaN's. */ | |
| put_field (uto, order, fmt->totalsize, fmt->exp_start, | |
| fmt->exp_len, fmt->exp_nan); | |
| /* Infinity mantissa is all zeroes. */ | |
| put_field (uto, order, fmt->totalsize, fmt->man_start, | |
| fmt->man_len, 0); | |
| goto finalize_byteorder; | |
| } | |
| #ifdef HAVE_LONG_DOUBLE | |
| mant = ldfrexp (dfrom, &exponent); | |
| #else | |
| mant = frexp (dfrom, &exponent); | |
| #endif | |
| put_field (uto, order, fmt->totalsize, fmt->exp_start, fmt->exp_len, | |
| exponent + fmt->exp_bias - 1); | |
| mant_bits_left = fmt->man_len; | |
| mant_off = fmt->man_start; | |
| while (mant_bits_left > 0) | |
| { | |
| unsigned long mant_long; | |
| mant_bits = mant_bits_left < 32 ? mant_bits_left : 32; | |
| mant *= 4294967296.0; | |
| mant_long = ((unsigned long) mant) & 0xffffffffL; | |
| mant -= mant_long; | |
| /* If the integer bit is implicit, then we need to discard it. | |
| If we are discarding a zero, we should be (but are not) creating | |
| a denormalized number which means adjusting the exponent | |
| (I think). */ | |
| if (mant_bits_left == fmt->man_len | |
| && fmt->intbit == floatformat_intbit_no) | |
| { | |
| mant_long <<= 1; | |
| mant_long &= 0xffffffffL; | |
| /* If we are processing the top 32 mantissa bits of a doublest | |
| so as to convert to a float value with implied integer bit, | |
| we will only be putting 31 of those 32 bits into the | |
| final value due to the discarding of the top bit. In the | |
| case of a small float value where the number of mantissa | |
| bits is less than 32, discarding the top bit does not alter | |
| the number of bits we will be adding to the result. */ | |
| if (mant_bits == 32) | |
| mant_bits -= 1; | |
| } | |
| if (mant_bits < 32) | |
| { | |
| /* The bits we want are in the most significant MANT_BITS bits of | |
| mant_long. Move them to the least significant. */ | |
| mant_long >>= 32 - mant_bits; | |
| } | |
| put_field (uto, order, fmt->totalsize, | |
| mant_off, mant_bits, mant_long); | |
| mant_off += mant_bits; | |
| mant_bits_left -= mant_bits; | |
| } | |
| finalize_byteorder: | |
| /* Do we need to byte-swap the words in the result? */ | |
| if (order != fmt->byteorder) | |
| floatformat_normalize_byteorder (fmt, newto, to); | |
| } | |
| /* Check if VAL (which is assumed to be a floating point number whose | |
| format is described by FMT) is negative. */ | |
| int | |
| floatformat_is_negative (const struct floatformat *fmt, | |
| const bfd_byte *uval) | |
| { | |
| enum floatformat_byteorders order; | |
| unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
| gdb_assert (fmt != NULL); | |
| gdb_assert (fmt->totalsize | |
| <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
| order = floatformat_normalize_byteorder (fmt, uval, newfrom); | |
| if (order != fmt->byteorder) | |
| uval = newfrom; | |
| return get_field (uval, order, fmt->totalsize, fmt->sign_start, 1); | |
| } | |
| /* Check if VAL is "not a number" (NaN) for FMT. */ | |
| enum float_kind | |
| floatformat_classify (const struct floatformat *fmt, | |
| const bfd_byte *uval) | |
| { | |
| long exponent; | |
| unsigned long mant; | |
| unsigned int mant_bits, mant_off; | |
| int mant_bits_left; | |
| enum floatformat_byteorders order; | |
| unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
| int mant_zero; | |
| gdb_assert (fmt != NULL); | |
| gdb_assert (fmt->totalsize | |
| <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
| order = floatformat_normalize_byteorder (fmt, uval, newfrom); | |
| if (order != fmt->byteorder) | |
| uval = newfrom; | |
| exponent = get_field (uval, order, fmt->totalsize, fmt->exp_start, | |
| fmt->exp_len); | |
| mant_bits_left = fmt->man_len; | |
| mant_off = fmt->man_start; | |
| mant_zero = 1; | |
| while (mant_bits_left > 0) | |
| { | |
| mant_bits = min (mant_bits_left, 32); | |
| mant = get_field (uval, order, fmt->totalsize, mant_off, mant_bits); | |
| /* If there is an explicit integer bit, mask it off. */ | |
| if (mant_off == fmt->man_start | |
| && fmt->intbit == floatformat_intbit_yes) | |
| mant &= ~(1 << (mant_bits - 1)); | |
| if (mant) | |
| { | |
| mant_zero = 0; | |
| break; | |
| } | |
| mant_off += mant_bits; | |
| mant_bits_left -= mant_bits; | |
| } | |
| /* If exp_nan is not set, assume that inf, NaN, and subnormals are not | |
| supported. */ | |
| if (! fmt->exp_nan) | |
| { | |
| if (mant_zero) | |
| return float_zero; | |
| else | |
| return float_normal; | |
| } | |
| if (exponent == 0 && !mant_zero) | |
| return float_subnormal; | |
| if (exponent == fmt->exp_nan) | |
| { | |
| if (mant_zero) | |
| return float_infinite; | |
| else | |
| return float_nan; | |
| } | |
| if (mant_zero) | |
| return float_zero; | |
| return float_normal; | |
| } | |
| /* Convert the mantissa of VAL (which is assumed to be a floating | |
| point number whose format is described by FMT) into a hexadecimal | |
| and store it in a static string. Return a pointer to that string. */ | |
| const char * | |
| floatformat_mantissa (const struct floatformat *fmt, | |
| const bfd_byte *val) | |
| { | |
| unsigned char *uval = (unsigned char *) val; | |
| unsigned long mant; | |
| unsigned int mant_bits, mant_off; | |
| int mant_bits_left; | |
| static char res[50]; | |
| char buf[9]; | |
| int len; | |
| enum floatformat_byteorders order; | |
| unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
| gdb_assert (fmt != NULL); | |
| gdb_assert (fmt->totalsize | |
| <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
| order = floatformat_normalize_byteorder (fmt, uval, newfrom); | |
| if (order != fmt->byteorder) | |
| uval = newfrom; | |
| if (! fmt->exp_nan) | |
| return 0; | |
| /* Make sure we have enough room to store the mantissa. */ | |
| gdb_assert (sizeof res > ((fmt->man_len + 7) / 8) * 2); | |
| mant_off = fmt->man_start; | |
| mant_bits_left = fmt->man_len; | |
| mant_bits = (mant_bits_left % 32) > 0 ? mant_bits_left % 32 : 32; | |
| mant = get_field (uval, order, fmt->totalsize, mant_off, mant_bits); | |
| len = xsnprintf (res, sizeof res, "%lx", mant); | |
| mant_off += mant_bits; | |
| mant_bits_left -= mant_bits; | |
| while (mant_bits_left > 0) | |
| { | |
| mant = get_field (uval, order, fmt->totalsize, mant_off, 32); | |
| xsnprintf (buf, sizeof buf, "%08lx", mant); | |
| gdb_assert (len + strlen (buf) <= sizeof res); | |
| strcat (res, buf); | |
| mant_off += 32; | |
| mant_bits_left -= 32; | |
| } | |
| return res; | |
| } | |
| /* Convert TO/FROM target to the hosts DOUBLEST floating-point format. | |
| If the host and target formats agree, we just copy the raw data | |
| into the appropriate type of variable and return, letting the host | |
| increase precision as necessary. Otherwise, we call the conversion | |
| routine and let it do the dirty work. */ | |
| static const struct floatformat *host_float_format = GDB_HOST_FLOAT_FORMAT; | |
| static const struct floatformat *host_double_format = GDB_HOST_DOUBLE_FORMAT; | |
| static const struct floatformat *host_long_double_format = GDB_HOST_LONG_DOUBLE_FORMAT; | |
| void | |
| floatformat_to_doublest (const struct floatformat *fmt, | |
| const void *in, DOUBLEST *out) | |
| { | |
| gdb_assert (fmt != NULL); | |
| if (fmt == host_float_format) | |
| { | |
| float val; | |
| memcpy (&val, in, sizeof (val)); | |
| *out = val; | |
| } | |
| else if (fmt == host_double_format) | |
| { | |
| double val; | |
| memcpy (&val, in, sizeof (val)); | |
| *out = val; | |
| } | |
| else if (fmt == host_long_double_format) | |
| { | |
| long double val; | |
| memcpy (&val, in, sizeof (val)); | |
| *out = val; | |
| } | |
| else | |
| convert_floatformat_to_doublest (fmt, in, out); | |
| } | |
| void | |
| floatformat_from_doublest (const struct floatformat *fmt, | |
| const DOUBLEST *in, void *out) | |
| { | |
| gdb_assert (fmt != NULL); | |
| if (fmt == host_float_format) | |
| { | |
| float val = *in; | |
| memcpy (out, &val, sizeof (val)); | |
| } | |
| else if (fmt == host_double_format) | |
| { | |
| double val = *in; | |
| memcpy (out, &val, sizeof (val)); | |
| } | |
| else if (fmt == host_long_double_format) | |
| { | |
| long double val = *in; | |
| memcpy (out, &val, sizeof (val)); | |
| } | |
| else | |
| convert_doublest_to_floatformat (fmt, in, out); | |
| } | |
| /* Return a floating-point format for a floating-point variable of | |
| length LEN. If no suitable floating-point format is found, an | |
| error is thrown. | |
| We need this functionality since information about the | |
| floating-point format of a type is not always available to GDB; the | |
| debug information typically only tells us the size of a | |
| floating-point type. | |
| FIXME: kettenis/2001-10-28: In many places, particularly in | |
| target-dependent code, the format of floating-point types is known, | |
| but not passed on by GDB. This should be fixed. */ | |
| static const struct floatformat * | |
| floatformat_from_length (int len) | |
| { | |
| const struct floatformat *format; | |
| if (len * TARGET_CHAR_BIT == gdbarch_float_bit (current_gdbarch)) | |
| format = gdbarch_float_format (current_gdbarch) | |
| [gdbarch_byte_order (current_gdbarch)]; | |
| else if (len * TARGET_CHAR_BIT == gdbarch_double_bit (current_gdbarch)) | |
| format = gdbarch_double_format (current_gdbarch) | |
| [gdbarch_byte_order (current_gdbarch)]; | |
| else if (len * TARGET_CHAR_BIT == gdbarch_long_double_bit (current_gdbarch)) | |
| format = gdbarch_long_double_format (current_gdbarch) | |
| [gdbarch_byte_order (current_gdbarch)]; | |
| /* On i386 the 'long double' type takes 96 bits, | |
| while the real number of used bits is only 80, | |
| both in processor and in memory. | |
| The code below accepts the real bit size. */ | |
| else if ((gdbarch_long_double_format (current_gdbarch) != NULL) | |
| && (len * TARGET_CHAR_BIT == | |
| gdbarch_long_double_format (current_gdbarch)[0]->totalsize)) | |
| format = gdbarch_long_double_format (current_gdbarch) | |
| [gdbarch_byte_order (current_gdbarch)]; | |
| else | |
| format = NULL; | |
| if (format == NULL) | |
| error (_("Unrecognized %d-bit floating-point type."), | |
| len * TARGET_CHAR_BIT); | |
| return format; | |
| } | |
| const struct floatformat * | |
| floatformat_from_type (const struct type *type) | |
| { | |
| gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT); | |
| if (TYPE_FLOATFORMAT (type) != NULL) | |
| return TYPE_FLOATFORMAT (type)[gdbarch_byte_order (current_gdbarch)]; | |
| else | |
| return floatformat_from_length (TYPE_LENGTH (type)); | |
| } | |
| /* If the host doesn't define NAN, use zero instead. */ | |
| #ifndef NAN | |
| #define NAN 0.0 | |
| #endif | |
| /* Extract a floating-point number of length LEN from a target-order | |
| byte-stream at ADDR. Returns the value as type DOUBLEST. */ | |
| static DOUBLEST | |
| extract_floating_by_length (const void *addr, int len) | |
| { | |
| const struct floatformat *fmt = floatformat_from_length (len); | |
| DOUBLEST val; | |
| floatformat_to_doublest (fmt, addr, &val); | |
| return val; | |
| } | |
| DOUBLEST | |
| deprecated_extract_floating (const void *addr, int len) | |
| { | |
| return extract_floating_by_length (addr, len); | |
| } | |
| /* Store VAL as a floating-point number of length LEN to a | |
| target-order byte-stream at ADDR. */ | |
| static void | |
| store_floating_by_length (void *addr, int len, DOUBLEST val) | |
| { | |
| const struct floatformat *fmt = floatformat_from_length (len); | |
| floatformat_from_doublest (fmt, &val, addr); | |
| } | |
| void | |
| deprecated_store_floating (void *addr, int len, DOUBLEST val) | |
| { | |
| store_floating_by_length (addr, len, val); | |
| } | |
| /* Extract a floating-point number of type TYPE from a target-order | |
| byte-stream at ADDR. Returns the value as type DOUBLEST. */ | |
| DOUBLEST | |
| extract_typed_floating (const void *addr, const struct type *type) | |
| { | |
| DOUBLEST retval; | |
| gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT); | |
| if (TYPE_FLOATFORMAT (type) == NULL) | |
| /* Not all code remembers to set the FLOATFORMAT (language | |
| specific code? stabs?) so handle that here as a special case. */ | |
| return extract_floating_by_length (addr, TYPE_LENGTH (type)); | |
| floatformat_to_doublest | |
| (TYPE_FLOATFORMAT (type)[gdbarch_byte_order (current_gdbarch)], | |
| addr, &retval); | |
| return retval; | |
| } | |
| /* Store VAL as a floating-point number of type TYPE to a target-order | |
| byte-stream at ADDR. */ | |
| void | |
| store_typed_floating (void *addr, const struct type *type, DOUBLEST val) | |
| { | |
| gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT); | |
| /* FIXME: kettenis/2001-10-28: It is debatable whether we should | |
| zero out any remaining bytes in the target buffer when TYPE is | |
| longer than the actual underlying floating-point format. Perhaps | |
| we should store a fixed bitpattern in those remaining bytes, | |
| instead of zero, or perhaps we shouldn't touch those remaining | |
| bytes at all. | |
| NOTE: cagney/2001-10-28: With the way things currently work, it | |
| isn't a good idea to leave the end bits undefined. This is | |
| because GDB writes out the entire sizeof(<floating>) bits of the | |
| floating-point type even though the value might only be stored | |
| in, and the target processor may only refer to, the first N < | |
| TYPE_LENGTH (type) bits. If the end of the buffer wasn't | |
| initialized, GDB would write undefined data to the target. An | |
| errant program, refering to that undefined data, would then | |
| become non-deterministic. | |
| See also the function convert_typed_floating below. */ | |
| memset (addr, 0, TYPE_LENGTH (type)); | |
| if (TYPE_FLOATFORMAT (type) == NULL) | |
| /* Not all code remembers to set the FLOATFORMAT (language | |
| specific code? stabs?) so handle that here as a special case. */ | |
| store_floating_by_length (addr, TYPE_LENGTH (type), val); | |
| else | |
| floatformat_from_doublest | |
| (TYPE_FLOATFORMAT (type)[gdbarch_byte_order (current_gdbarch)], | |
| &val, addr); | |
| } | |
| /* Convert a floating-point number of type FROM_TYPE from a | |
| target-order byte-stream at FROM to a floating-point number of type | |
| TO_TYPE, and store it to a target-order byte-stream at TO. */ | |
| void | |
| convert_typed_floating (const void *from, const struct type *from_type, | |
| void *to, const struct type *to_type) | |
| { | |
| const struct floatformat *from_fmt = floatformat_from_type (from_type); | |
| const struct floatformat *to_fmt = floatformat_from_type (to_type); | |
| gdb_assert (TYPE_CODE (from_type) == TYPE_CODE_FLT); | |
| gdb_assert (TYPE_CODE (to_type) == TYPE_CODE_FLT); | |
| if (from_fmt == NULL || to_fmt == NULL) | |
| { | |
| /* If we don't know the floating-point format of FROM_TYPE or | |
| TO_TYPE, there's not much we can do. We might make the | |
| assumption that if the length of FROM_TYPE and TO_TYPE match, | |
| their floating-point format would match too, but that | |
| assumption might be wrong on targets that support | |
| floating-point types that only differ in endianness for | |
| example. So we warn instead, and zero out the target buffer. */ | |
| warning (_("Can't convert floating-point number to desired type.")); | |
| memset (to, 0, TYPE_LENGTH (to_type)); | |
| } | |
| else if (from_fmt == to_fmt) | |
| { | |
| /* We're in business. The floating-point format of FROM_TYPE | |
| and TO_TYPE match. However, even though the floating-point | |
| format matches, the length of the type might still be | |
| different. Make sure we don't overrun any buffers. See | |
| comment in store_typed_floating for a discussion about | |
| zeroing out remaining bytes in the target buffer. */ | |
| memset (to, 0, TYPE_LENGTH (to_type)); | |
| memcpy (to, from, min (TYPE_LENGTH (from_type), TYPE_LENGTH (to_type))); | |
| } | |
| else | |
| { | |
| /* The floating-point types don't match. The best we can do | |
| (apart from simulating the target FPU) is converting to the | |
| widest floating-point type supported by the host, and then | |
| again to the desired type. */ | |
| DOUBLEST d; | |
| floatformat_to_doublest (from_fmt, from, &d); | |
| floatformat_from_doublest (to_fmt, &d, to); | |
| } | |
| } | |
| const struct floatformat *floatformat_ieee_single[BFD_ENDIAN_UNKNOWN]; | |
| const struct floatformat *floatformat_ieee_double[BFD_ENDIAN_UNKNOWN]; | |
| const struct floatformat *floatformat_ieee_quad[BFD_ENDIAN_UNKNOWN]; | |
| const struct floatformat *floatformat_arm_ext[BFD_ENDIAN_UNKNOWN]; | |
| const struct floatformat *floatformat_ia64_spill[BFD_ENDIAN_UNKNOWN]; | |
| extern void _initialize_doublest (void); | |
| extern void | |
| _initialize_doublest (void) | |
| { | |
| floatformat_ieee_single[BFD_ENDIAN_LITTLE] = &floatformat_ieee_single_little; | |
| floatformat_ieee_single[BFD_ENDIAN_BIG] = &floatformat_ieee_single_big; | |
| floatformat_ieee_double[BFD_ENDIAN_LITTLE] = &floatformat_ieee_double_little; | |
| floatformat_ieee_double[BFD_ENDIAN_BIG] = &floatformat_ieee_double_big; | |
| floatformat_arm_ext[BFD_ENDIAN_LITTLE] = &floatformat_arm_ext_littlebyte_bigword; | |
| floatformat_arm_ext[BFD_ENDIAN_BIG] = &floatformat_arm_ext_big; | |
| floatformat_ia64_spill[BFD_ENDIAN_LITTLE] = &floatformat_ia64_spill_little; | |
| floatformat_ia64_spill[BFD_ENDIAN_BIG] = &floatformat_ia64_spill_big; | |
| floatformat_ieee_quad[BFD_ENDIAN_LITTLE] = &floatformat_ia64_quad_little; | |
| floatformat_ieee_quad[BFD_ENDIAN_BIG] = &floatformat_ia64_quad_big; | |
| } |