| /* Target-struct-independent code to start (run) and stop an inferior | |
| process. | |
| Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, | |
| 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, | |
| 2008 Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "gdb_string.h" | |
| #include <ctype.h> | |
| #include "symtab.h" | |
| #include "frame.h" | |
| #include "inferior.h" | |
| #include "exceptions.h" | |
| #include "breakpoint.h" | |
| #include "gdb_wait.h" | |
| #include "gdbcore.h" | |
| #include "gdbcmd.h" | |
| #include "cli/cli-script.h" | |
| #include "target.h" | |
| #include "gdbthread.h" | |
| #include "annotate.h" | |
| #include "symfile.h" | |
| #include "top.h" | |
| #include <signal.h> | |
| #include "inf-loop.h" | |
| #include "regcache.h" | |
| #include "value.h" | |
| #include "observer.h" | |
| #include "language.h" | |
| #include "solib.h" | |
| #include "main.h" | |
| #include "gdb_assert.h" | |
| #include "mi/mi-common.h" | |
| #include "event-top.h" | |
| #include "record.h" | |
| /* When the record function want inferior step before call function | |
| "keep_going", "reverse_resume_need_step" will be set to 1. It will be set | |
| back to 0 in the begin of function "handle_inferior_event" because it just | |
| be accessed by the sub-functions of "handle_inferior_event". */ | |
| static int reverse_resume_need_step = 0; | |
| /* Prototypes for local functions */ | |
| static void signals_info (char *, int); | |
| static void handle_command (char *, int); | |
| static void sig_print_info (enum target_signal); | |
| static void sig_print_header (void); | |
| static void resume_cleanups (void *); | |
| static int hook_stop_stub (void *); | |
| static int restore_selected_frame (void *); | |
| static void build_infrun (void); | |
| static int follow_fork (void); | |
| static void set_schedlock_func (char *args, int from_tty, | |
| struct cmd_list_element *c); | |
| struct thread_stepping_state; | |
| static int currently_stepping (struct thread_stepping_state *tss); | |
| static void xdb_handle_command (char *args, int from_tty); | |
| static int prepare_to_proceed (int); | |
| void _initialize_infrun (void); | |
| /* When set, stop the 'step' command if we enter a function which has | |
| no line number information. The normal behavior is that we step | |
| over such function. */ | |
| int step_stop_if_no_debug = 0; | |
| static void | |
| show_step_stop_if_no_debug (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value); | |
| } | |
| /* In asynchronous mode, but simulating synchronous execution. */ | |
| int sync_execution = 0; | |
| /* wait_for_inferior and normal_stop use this to notify the user | |
| when the inferior stopped in a different thread than it had been | |
| running in. */ | |
| static ptid_t previous_inferior_ptid; | |
| int debug_displaced = 0; | |
| static void | |
| show_debug_displaced (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value); | |
| } | |
| static int debug_infrun = 0; | |
| static void | |
| show_debug_infrun (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, _("Inferior debugging is %s.\n"), value); | |
| } | |
| /* If the program uses ELF-style shared libraries, then calls to | |
| functions in shared libraries go through stubs, which live in a | |
| table called the PLT (Procedure Linkage Table). The first time the | |
| function is called, the stub sends control to the dynamic linker, | |
| which looks up the function's real address, patches the stub so | |
| that future calls will go directly to the function, and then passes | |
| control to the function. | |
| If we are stepping at the source level, we don't want to see any of | |
| this --- we just want to skip over the stub and the dynamic linker. | |
| The simple approach is to single-step until control leaves the | |
| dynamic linker. | |
| However, on some systems (e.g., Red Hat's 5.2 distribution) the | |
| dynamic linker calls functions in the shared C library, so you | |
| can't tell from the PC alone whether the dynamic linker is still | |
| running. In this case, we use a step-resume breakpoint to get us | |
| past the dynamic linker, as if we were using "next" to step over a | |
| function call. | |
| IN_SOLIB_DYNSYM_RESOLVE_CODE says whether we're in the dynamic | |
| linker code or not. Normally, this means we single-step. However, | |
| if SKIP_SOLIB_RESOLVER then returns non-zero, then its value is an | |
| address where we can place a step-resume breakpoint to get past the | |
| linker's symbol resolution function. | |
| IN_SOLIB_DYNSYM_RESOLVE_CODE can generally be implemented in a | |
| pretty portable way, by comparing the PC against the address ranges | |
| of the dynamic linker's sections. | |
| SKIP_SOLIB_RESOLVER is generally going to be system-specific, since | |
| it depends on internal details of the dynamic linker. It's usually | |
| not too hard to figure out where to put a breakpoint, but it | |
| certainly isn't portable. SKIP_SOLIB_RESOLVER should do plenty of | |
| sanity checking. If it can't figure things out, returning zero and | |
| getting the (possibly confusing) stepping behavior is better than | |
| signalling an error, which will obscure the change in the | |
| inferior's state. */ | |
| /* This function returns TRUE if pc is the address of an instruction | |
| that lies within the dynamic linker (such as the event hook, or the | |
| dld itself). | |
| This function must be used only when a dynamic linker event has | |
| been caught, and the inferior is being stepped out of the hook, or | |
| undefined results are guaranteed. */ | |
| #ifndef SOLIB_IN_DYNAMIC_LINKER | |
| #define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0 | |
| #endif | |
| /* Convert the #defines into values. This is temporary until wfi control | |
| flow is completely sorted out. */ | |
| #ifndef CANNOT_STEP_HW_WATCHPOINTS | |
| #define CANNOT_STEP_HW_WATCHPOINTS 0 | |
| #else | |
| #undef CANNOT_STEP_HW_WATCHPOINTS | |
| #define CANNOT_STEP_HW_WATCHPOINTS 1 | |
| #endif | |
| /* Tables of how to react to signals; the user sets them. */ | |
| static unsigned char *signal_stop; | |
| static unsigned char *signal_print; | |
| static unsigned char *signal_program; | |
| #define SET_SIGS(nsigs,sigs,flags) \ | |
| do { \ | |
| int signum = (nsigs); \ | |
| while (signum-- > 0) \ | |
| if ((sigs)[signum]) \ | |
| (flags)[signum] = 1; \ | |
| } while (0) | |
| #define UNSET_SIGS(nsigs,sigs,flags) \ | |
| do { \ | |
| int signum = (nsigs); \ | |
| while (signum-- > 0) \ | |
| if ((sigs)[signum]) \ | |
| (flags)[signum] = 0; \ | |
| } while (0) | |
| /* Value to pass to target_resume() to cause all threads to resume */ | |
| #define RESUME_ALL (pid_to_ptid (-1)) | |
| /* Command list pointer for the "stop" placeholder. */ | |
| static struct cmd_list_element *stop_command; | |
| /* Function inferior was in as of last step command. */ | |
| static struct symbol *step_start_function; | |
| /* Nonzero if we are presently stepping over a breakpoint. | |
| If we hit a breakpoint or watchpoint, and then continue, | |
| we need to single step the current thread with breakpoints | |
| disabled, to avoid hitting the same breakpoint or | |
| watchpoint again. And we should step just a single | |
| thread and keep other threads stopped, so that | |
| other threads don't miss breakpoints while they are removed. | |
| So, this variable simultaneously means that we need to single | |
| step the current thread, keep other threads stopped, and that | |
| breakpoints should be removed while we step. | |
| This variable is set either: | |
| - in proceed, when we resume inferior on user's explicit request | |
| - in keep_going, if handle_inferior_event decides we need to | |
| step over breakpoint. | |
| The variable is cleared in clear_proceed_status, called every | |
| time before we call proceed. The proceed calls wait_for_inferior, | |
| which calls handle_inferior_event in a loop, and until | |
| wait_for_inferior exits, this variable is changed only by keep_going. */ | |
| static int stepping_over_breakpoint; | |
| /* Nonzero if we want to give control to the user when we're notified | |
| of shared library events by the dynamic linker. */ | |
| static int stop_on_solib_events; | |
| static void | |
| show_stop_on_solib_events (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, _("Stopping for shared library events is %s.\n"), | |
| value); | |
| } | |
| /* Nonzero means expecting a trace trap | |
| and should stop the inferior and return silently when it happens. */ | |
| int stop_after_trap; | |
| /* Nonzero means expecting a trap and caller will handle it themselves. | |
| It is used after attach, due to attaching to a process; | |
| when running in the shell before the child program has been exec'd; | |
| and when running some kinds of remote stuff (FIXME?). */ | |
| enum stop_kind stop_soon; | |
| /* Nonzero if proceed is being used for a "finish" command or a similar | |
| situation when stop_registers should be saved. */ | |
| int proceed_to_finish; | |
| /* Save register contents here when about to pop a stack dummy frame, | |
| if-and-only-if proceed_to_finish is set. | |
| Thus this contains the return value from the called function (assuming | |
| values are returned in a register). */ | |
| struct regcache *stop_registers; | |
| /* Nonzero after stop if current stack frame should be printed. */ | |
| static int stop_print_frame; | |
| /* Step-resume or longjmp-resume breakpoint. */ | |
| static struct breakpoint *step_resume_breakpoint = NULL; | |
| /* This is a cached copy of the pid/waitstatus of the last event | |
| returned by target_wait()/deprecated_target_wait_hook(). This | |
| information is returned by get_last_target_status(). */ | |
| static ptid_t target_last_wait_ptid; | |
| static struct target_waitstatus target_last_waitstatus; | |
| /* Context-switchable data. */ | |
| struct thread_stepping_state | |
| { | |
| /* Should we step over breakpoint next time keep_going | |
| is called? */ | |
| int stepping_over_breakpoint; | |
| int current_line; | |
| struct symtab *current_symtab; | |
| int step_after_step_resume_breakpoint; | |
| int stepping_through_solib_after_catch; | |
| bpstat stepping_through_solib_catchpoints; | |
| }; | |
| struct thread_stepping_state gtss; | |
| struct thread_stepping_state *tss = >ss; | |
| static void context_switch (ptid_t ptid); | |
| void init_thread_stepping_state (struct thread_stepping_state *tss); | |
| void init_infwait_state (void); | |
| /* This is used to remember when a fork, vfork or exec event | |
| was caught by a catchpoint, and thus the event is to be | |
| followed at the next resume of the inferior, and not | |
| immediately. */ | |
| static struct | |
| { | |
| enum target_waitkind kind; | |
| struct | |
| { | |
| ptid_t parent_pid; | |
| ptid_t child_pid; | |
| } | |
| fork_event; | |
| char *execd_pathname; | |
| } | |
| pending_follow; | |
| static const char follow_fork_mode_child[] = "child"; | |
| static const char follow_fork_mode_parent[] = "parent"; | |
| static const char *follow_fork_mode_kind_names[] = { | |
| follow_fork_mode_child, | |
| follow_fork_mode_parent, | |
| NULL | |
| }; | |
| static const char *follow_fork_mode_string = follow_fork_mode_parent; | |
| static void | |
| show_follow_fork_mode_string (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, _("\ | |
| Debugger response to a program call of fork or vfork is \"%s\".\n"), | |
| value); | |
| } | |
| static int | |
| follow_fork (void) | |
| { | |
| int follow_child = (follow_fork_mode_string == follow_fork_mode_child); | |
| return target_follow_fork (follow_child); | |
| } | |
| void | |
| follow_inferior_reset_breakpoints (void) | |
| { | |
| /* Was there a step_resume breakpoint? (There was if the user | |
| did a "next" at the fork() call.) If so, explicitly reset its | |
| thread number. | |
| step_resumes are a form of bp that are made to be per-thread. | |
| Since we created the step_resume bp when the parent process | |
| was being debugged, and now are switching to the child process, | |
| from the breakpoint package's viewpoint, that's a switch of | |
| "threads". We must update the bp's notion of which thread | |
| it is for, or it'll be ignored when it triggers. */ | |
| if (step_resume_breakpoint) | |
| breakpoint_re_set_thread (step_resume_breakpoint); | |
| /* Reinsert all breakpoints in the child. The user may have set | |
| breakpoints after catching the fork, in which case those | |
| were never set in the child, but only in the parent. This makes | |
| sure the inserted breakpoints match the breakpoint list. */ | |
| breakpoint_re_set (); | |
| insert_breakpoints (); | |
| } | |
| /* EXECD_PATHNAME is assumed to be non-NULL. */ | |
| static void | |
| follow_exec (ptid_t pid, char *execd_pathname) | |
| { | |
| ptid_t saved_pid = pid; | |
| struct target_ops *tgt; | |
| /* This is an exec event that we actually wish to pay attention to. | |
| Refresh our symbol table to the newly exec'd program, remove any | |
| momentary bp's, etc. | |
| If there are breakpoints, they aren't really inserted now, | |
| since the exec() transformed our inferior into a fresh set | |
| of instructions. | |
| We want to preserve symbolic breakpoints on the list, since | |
| we have hopes that they can be reset after the new a.out's | |
| symbol table is read. | |
| However, any "raw" breakpoints must be removed from the list | |
| (e.g., the solib bp's), since their address is probably invalid | |
| now. | |
| And, we DON'T want to call delete_breakpoints() here, since | |
| that may write the bp's "shadow contents" (the instruction | |
| value that was overwritten witha TRAP instruction). Since | |
| we now have a new a.out, those shadow contents aren't valid. */ | |
| update_breakpoints_after_exec (); | |
| /* If there was one, it's gone now. We cannot truly step-to-next | |
| statement through an exec(). */ | |
| step_resume_breakpoint = NULL; | |
| step_range_start = 0; | |
| step_range_end = 0; | |
| /* What is this a.out's name? */ | |
| printf_unfiltered (_("Executing new program: %s\n"), execd_pathname); | |
| /* We've followed the inferior through an exec. Therefore, the | |
| inferior has essentially been killed & reborn. */ | |
| gdb_flush (gdb_stdout); | |
| generic_mourn_inferior (); | |
| /* Because mourn_inferior resets inferior_ptid. */ | |
| inferior_ptid = saved_pid; | |
| if (gdb_sysroot && *gdb_sysroot) | |
| { | |
| char *name = alloca (strlen (gdb_sysroot) | |
| + strlen (execd_pathname) | |
| + 1); | |
| strcpy (name, gdb_sysroot); | |
| strcat (name, execd_pathname); | |
| execd_pathname = name; | |
| } | |
| /* That a.out is now the one to use. */ | |
| exec_file_attach (execd_pathname, 0); | |
| /* Reset the shared library package. This ensures that we get a | |
| shlib event when the child reaches "_start", at which point the | |
| dld will have had a chance to initialize the child. */ | |
| /* Also, loading a symbol file below may trigger symbol lookups, and | |
| we don't want those to be satisfied by the libraries of the | |
| previous incarnation of this process. */ | |
| no_shared_libraries (NULL, 0); | |
| /* Load the main file's symbols. */ | |
| symbol_file_add_main (execd_pathname, 0); | |
| #ifdef SOLIB_CREATE_INFERIOR_HOOK | |
| SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid)); | |
| #else | |
| solib_create_inferior_hook (); | |
| #endif | |
| /* Reinsert all breakpoints. (Those which were symbolic have | |
| been reset to the proper address in the new a.out, thanks | |
| to symbol_file_command...) */ | |
| insert_breakpoints (); | |
| /* The next resume of this inferior should bring it to the shlib | |
| startup breakpoints. (If the user had also set bp's on | |
| "main" from the old (parent) process, then they'll auto- | |
| matically get reset there in the new process.) */ | |
| } | |
| /* Non-zero if we just simulating a single-step. This is needed | |
| because we cannot remove the breakpoints in the inferior process | |
| until after the `wait' in `wait_for_inferior'. */ | |
| static int singlestep_breakpoints_inserted_p = 0; | |
| /* The thread we inserted single-step breakpoints for. */ | |
| static ptid_t singlestep_ptid; | |
| /* PC when we started this single-step. */ | |
| static CORE_ADDR singlestep_pc; | |
| /* If another thread hit the singlestep breakpoint, we save the original | |
| thread here so that we can resume single-stepping it later. */ | |
| static ptid_t saved_singlestep_ptid; | |
| static int stepping_past_singlestep_breakpoint; | |
| /* If not equal to null_ptid, this means that after stepping over breakpoint | |
| is finished, we need to switch to deferred_step_ptid, and step it. | |
| The use case is when one thread has hit a breakpoint, and then the user | |
| has switched to another thread and issued 'step'. We need to step over | |
| breakpoint in the thread which hit the breakpoint, but then continue | |
| stepping the thread user has selected. */ | |
| static ptid_t deferred_step_ptid; | |
| /* Displaced stepping. */ | |
| /* In non-stop debugging mode, we must take special care to manage | |
| breakpoints properly; in particular, the traditional strategy for | |
| stepping a thread past a breakpoint it has hit is unsuitable. | |
| 'Displaced stepping' is a tactic for stepping one thread past a | |
| breakpoint it has hit while ensuring that other threads running | |
| concurrently will hit the breakpoint as they should. | |
| The traditional way to step a thread T off a breakpoint in a | |
| multi-threaded program in all-stop mode is as follows: | |
| a0) Initially, all threads are stopped, and breakpoints are not | |
| inserted. | |
| a1) We single-step T, leaving breakpoints uninserted. | |
| a2) We insert breakpoints, and resume all threads. | |
| In non-stop debugging, however, this strategy is unsuitable: we | |
| don't want to have to stop all threads in the system in order to | |
| continue or step T past a breakpoint. Instead, we use displaced | |
| stepping: | |
| n0) Initially, T is stopped, other threads are running, and | |
| breakpoints are inserted. | |
| n1) We copy the instruction "under" the breakpoint to a separate | |
| location, outside the main code stream, making any adjustments | |
| to the instruction, register, and memory state as directed by | |
| T's architecture. | |
| n2) We single-step T over the instruction at its new location. | |
| n3) We adjust the resulting register and memory state as directed | |
| by T's architecture. This includes resetting T's PC to point | |
| back into the main instruction stream. | |
| n4) We resume T. | |
| This approach depends on the following gdbarch methods: | |
| - gdbarch_max_insn_length and gdbarch_displaced_step_location | |
| indicate where to copy the instruction, and how much space must | |
| be reserved there. We use these in step n1. | |
| - gdbarch_displaced_step_copy_insn copies a instruction to a new | |
| address, and makes any necessary adjustments to the instruction, | |
| register contents, and memory. We use this in step n1. | |
| - gdbarch_displaced_step_fixup adjusts registers and memory after | |
| we have successfuly single-stepped the instruction, to yield the | |
| same effect the instruction would have had if we had executed it | |
| at its original address. We use this in step n3. | |
| - gdbarch_displaced_step_free_closure provides cleanup. | |
| The gdbarch_displaced_step_copy_insn and | |
| gdbarch_displaced_step_fixup functions must be written so that | |
| copying an instruction with gdbarch_displaced_step_copy_insn, | |
| single-stepping across the copied instruction, and then applying | |
| gdbarch_displaced_insn_fixup should have the same effects on the | |
| thread's memory and registers as stepping the instruction in place | |
| would have. Exactly which responsibilities fall to the copy and | |
| which fall to the fixup is up to the author of those functions. | |
| See the comments in gdbarch.sh for details. | |
| Note that displaced stepping and software single-step cannot | |
| currently be used in combination, although with some care I think | |
| they could be made to. Software single-step works by placing | |
| breakpoints on all possible subsequent instructions; if the | |
| displaced instruction is a PC-relative jump, those breakpoints | |
| could fall in very strange places --- on pages that aren't | |
| executable, or at addresses that are not proper instruction | |
| boundaries. (We do generally let other threads run while we wait | |
| to hit the software single-step breakpoint, and they might | |
| encounter such a corrupted instruction.) One way to work around | |
| this would be to have gdbarch_displaced_step_copy_insn fully | |
| simulate the effect of PC-relative instructions (and return NULL) | |
| on architectures that use software single-stepping. | |
| In non-stop mode, we can have independent and simultaneous step | |
| requests, so more than one thread may need to simultaneously step | |
| over a breakpoint. The current implementation assumes there is | |
| only one scratch space per process. In this case, we have to | |
| serialize access to the scratch space. If thread A wants to step | |
| over a breakpoint, but we are currently waiting for some other | |
| thread to complete a displaced step, we leave thread A stopped and | |
| place it in the displaced_step_request_queue. Whenever a displaced | |
| step finishes, we pick the next thread in the queue and start a new | |
| displaced step operation on it. See displaced_step_prepare and | |
| displaced_step_fixup for details. */ | |
| /* If this is not null_ptid, this is the thread carrying out a | |
| displaced single-step. This thread's state will require fixing up | |
| once it has completed its step. */ | |
| static ptid_t displaced_step_ptid; | |
| struct displaced_step_request | |
| { | |
| ptid_t ptid; | |
| struct displaced_step_request *next; | |
| }; | |
| /* A queue of pending displaced stepping requests. */ | |
| struct displaced_step_request *displaced_step_request_queue; | |
| /* The architecture the thread had when we stepped it. */ | |
| static struct gdbarch *displaced_step_gdbarch; | |
| /* The closure provided gdbarch_displaced_step_copy_insn, to be used | |
| for post-step cleanup. */ | |
| static struct displaced_step_closure *displaced_step_closure; | |
| /* The address of the original instruction, and the copy we made. */ | |
| static CORE_ADDR displaced_step_original, displaced_step_copy; | |
| /* Saved contents of copy area. */ | |
| static gdb_byte *displaced_step_saved_copy; | |
| /* When this is non-zero, we are allowed to use displaced stepping, if | |
| the architecture supports it. When this is zero, we use | |
| traditional the hold-and-step approach. */ | |
| int can_use_displaced_stepping = 1; | |
| static void | |
| show_can_use_displaced_stepping (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, | |
| const char *value) | |
| { | |
| fprintf_filtered (file, _("\ | |
| Debugger's willingness to use displaced stepping to step over " | |
| "breakpoints is %s.\n"), value); | |
| } | |
| /* Return non-zero if displaced stepping is enabled, and can be used | |
| with GDBARCH. */ | |
| /* When GDB is working in record replay mode, it doesn't need use desplaced | |
| step. */ | |
| static int | |
| use_displaced_stepping (struct gdbarch *gdbarch) | |
| { | |
| return (can_use_displaced_stepping | |
| && gdbarch_displaced_step_copy_insn_p (gdbarch) | |
| && !RECORD_IS_USED); | |
| } | |
| /* Clean out any stray displaced stepping state. */ | |
| static void | |
| displaced_step_clear (void) | |
| { | |
| /* Indicate that there is no cleanup pending. */ | |
| displaced_step_ptid = null_ptid; | |
| if (displaced_step_closure) | |
| { | |
| gdbarch_displaced_step_free_closure (displaced_step_gdbarch, | |
| displaced_step_closure); | |
| displaced_step_closure = NULL; | |
| } | |
| } | |
| static void | |
| cleanup_displaced_step_closure (void *ptr) | |
| { | |
| struct displaced_step_closure *closure = ptr; | |
| gdbarch_displaced_step_free_closure (current_gdbarch, closure); | |
| } | |
| /* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */ | |
| void | |
| displaced_step_dump_bytes (struct ui_file *file, | |
| const gdb_byte *buf, | |
| size_t len) | |
| { | |
| int i; | |
| for (i = 0; i < len; i++) | |
| fprintf_unfiltered (file, "%02x ", buf[i]); | |
| fputs_unfiltered ("\n", file); | |
| } | |
| /* Prepare to single-step, using displaced stepping. | |
| Note that we cannot use displaced stepping when we have a signal to | |
| deliver. If we have a signal to deliver and an instruction to step | |
| over, then after the step, there will be no indication from the | |
| target whether the thread entered a signal handler or ignored the | |
| signal and stepped over the instruction successfully --- both cases | |
| result in a simple SIGTRAP. In the first case we mustn't do a | |
| fixup, and in the second case we must --- but we can't tell which. | |
| Comments in the code for 'random signals' in handle_inferior_event | |
| explain how we handle this case instead. | |
| Returns 1 if preparing was successful -- this thread is going to be | |
| stepped now; or 0 if displaced stepping this thread got queued. */ | |
| static int | |
| displaced_step_prepare (ptid_t ptid) | |
| { | |
| struct cleanup *old_cleanups; | |
| struct regcache *regcache = get_thread_regcache (ptid); | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| CORE_ADDR original, copy; | |
| ULONGEST len; | |
| struct displaced_step_closure *closure; | |
| /* We should never reach this function if the architecture does not | |
| support displaced stepping. */ | |
| gdb_assert (gdbarch_displaced_step_copy_insn_p (gdbarch)); | |
| /* For the first cut, we're displaced stepping one thread at a | |
| time. */ | |
| if (!ptid_equal (displaced_step_ptid, null_ptid)) | |
| { | |
| /* Already waiting for a displaced step to finish. Defer this | |
| request and place in queue. */ | |
| struct displaced_step_request *req, *new_req; | |
| if (debug_displaced) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "displaced: defering step of %s\n", | |
| target_pid_to_str (ptid)); | |
| new_req = xmalloc (sizeof (*new_req)); | |
| new_req->ptid = ptid; | |
| new_req->next = NULL; | |
| if (displaced_step_request_queue) | |
| { | |
| for (req = displaced_step_request_queue; | |
| req && req->next; | |
| req = req->next) | |
| ; | |
| req->next = new_req; | |
| } | |
| else | |
| displaced_step_request_queue = new_req; | |
| return 0; | |
| } | |
| else | |
| { | |
| if (debug_displaced) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "displaced: stepping %s now\n", | |
| target_pid_to_str (ptid)); | |
| } | |
| displaced_step_clear (); | |
| original = regcache_read_pc (regcache); | |
| copy = gdbarch_displaced_step_location (gdbarch); | |
| len = gdbarch_max_insn_length (gdbarch); | |
| /* Save the original contents of the copy area. */ | |
| displaced_step_saved_copy = xmalloc (len); | |
| old_cleanups = make_cleanup (free_current_contents, | |
| &displaced_step_saved_copy); | |
| read_memory (copy, displaced_step_saved_copy, len); | |
| if (debug_displaced) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, "displaced: saved 0x%s: ", | |
| paddr_nz (copy)); | |
| displaced_step_dump_bytes (gdb_stdlog, displaced_step_saved_copy, len); | |
| }; | |
| closure = gdbarch_displaced_step_copy_insn (gdbarch, | |
| original, copy, regcache); | |
| /* We don't support the fully-simulated case at present. */ | |
| gdb_assert (closure); | |
| make_cleanup (cleanup_displaced_step_closure, closure); | |
| /* Resume execution at the copy. */ | |
| regcache_write_pc (regcache, copy); | |
| discard_cleanups (old_cleanups); | |
| if (debug_displaced) | |
| fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to 0x%s\n", | |
| paddr_nz (copy)); | |
| /* Save the information we need to fix things up if the step | |
| succeeds. */ | |
| displaced_step_ptid = ptid; | |
| displaced_step_gdbarch = gdbarch; | |
| displaced_step_closure = closure; | |
| displaced_step_original = original; | |
| displaced_step_copy = copy; | |
| return 1; | |
| } | |
| static void | |
| displaced_step_clear_cleanup (void *ignore) | |
| { | |
| displaced_step_clear (); | |
| } | |
| static void | |
| write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr, const gdb_byte *myaddr, int len) | |
| { | |
| struct cleanup *ptid_cleanup = save_inferior_ptid (); | |
| inferior_ptid = ptid; | |
| write_memory (memaddr, myaddr, len); | |
| do_cleanups (ptid_cleanup); | |
| } | |
| void | |
| displaced_step_fixup (ptid_t event_ptid, enum target_signal signal) | |
| { | |
| struct cleanup *old_cleanups; | |
| /* Was this event for the pid we displaced? */ | |
| if (ptid_equal (displaced_step_ptid, null_ptid) | |
| || ! ptid_equal (displaced_step_ptid, event_ptid)) | |
| return; | |
| old_cleanups = make_cleanup (displaced_step_clear_cleanup, 0); | |
| /* Restore the contents of the copy area. */ | |
| { | |
| ULONGEST len = gdbarch_max_insn_length (displaced_step_gdbarch); | |
| write_memory_ptid (displaced_step_ptid, displaced_step_copy, | |
| displaced_step_saved_copy, len); | |
| if (debug_displaced) | |
| fprintf_unfiltered (gdb_stdlog, "displaced: restored 0x%s\n", | |
| paddr_nz (displaced_step_copy)); | |
| } | |
| /* Did the instruction complete successfully? */ | |
| if (signal == TARGET_SIGNAL_TRAP) | |
| { | |
| /* Fix up the resulting state. */ | |
| gdbarch_displaced_step_fixup (displaced_step_gdbarch, | |
| displaced_step_closure, | |
| displaced_step_original, | |
| displaced_step_copy, | |
| get_thread_regcache (displaced_step_ptid)); | |
| } | |
| else | |
| { | |
| /* Since the instruction didn't complete, all we can do is | |
| relocate the PC. */ | |
| struct regcache *regcache = get_thread_regcache (event_ptid); | |
| CORE_ADDR pc = regcache_read_pc (regcache); | |
| pc = displaced_step_original + (pc - displaced_step_copy); | |
| regcache_write_pc (regcache, pc); | |
| } | |
| do_cleanups (old_cleanups); | |
| /* Are there any pending displaced stepping requests? If so, run | |
| one now. */ | |
| if (displaced_step_request_queue) | |
| { | |
| struct displaced_step_request *head; | |
| ptid_t ptid; | |
| head = displaced_step_request_queue; | |
| ptid = head->ptid; | |
| displaced_step_request_queue = head->next; | |
| xfree (head); | |
| if (debug_displaced) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "displaced: stepping queued %s now\n", | |
| target_pid_to_str (ptid)); | |
| displaced_step_ptid = null_ptid; | |
| displaced_step_prepare (ptid); | |
| target_resume (ptid, 1, TARGET_SIGNAL_0); | |
| } | |
| } | |
| /* Resuming. */ | |
| /* Things to clean up if we QUIT out of resume (). */ | |
| static void | |
| resume_cleanups (void *ignore) | |
| { | |
| normal_stop (); | |
| } | |
| static const char schedlock_off[] = "off"; | |
| static const char schedlock_on[] = "on"; | |
| static const char schedlock_step[] = "step"; | |
| static const char *scheduler_enums[] = { | |
| schedlock_off, | |
| schedlock_on, | |
| schedlock_step, | |
| NULL | |
| }; | |
| static const char *scheduler_mode = schedlock_off; | |
| static void | |
| show_scheduler_mode (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, _("\ | |
| Mode for locking scheduler during execution is \"%s\".\n"), | |
| value); | |
| } | |
| static void | |
| set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c) | |
| { | |
| if (!target_can_lock_scheduler) | |
| { | |
| scheduler_mode = schedlock_off; | |
| error (_("Target '%s' cannot support this command."), target_shortname); | |
| } | |
| } | |
| /* Resume the inferior, but allow a QUIT. This is useful if the user | |
| wants to interrupt some lengthy single-stepping operation | |
| (for child processes, the SIGINT goes to the inferior, and so | |
| we get a SIGINT random_signal, but for remote debugging and perhaps | |
| other targets, that's not true). | |
| STEP nonzero if we should step (zero to continue instead). | |
| SIG is the signal to give the inferior (zero for none). */ | |
| void | |
| resume (int step, enum target_signal sig) | |
| { | |
| int should_resume = 1; | |
| struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0); | |
| struct regcache *regcache = get_current_regcache (); | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| CORE_ADDR pc = regcache_read_pc (regcache); | |
| QUIT; | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: resume (step=%d, signal=%d), " | |
| "stepping_over_breakpoint=%d\n", | |
| step, sig, stepping_over_breakpoint); | |
| /* Some targets (e.g. Solaris x86) have a kernel bug when stepping | |
| over an instruction that causes a page fault without triggering | |
| a hardware watchpoint. The kernel properly notices that it shouldn't | |
| stop, because the hardware watchpoint is not triggered, but it forgets | |
| the step request and continues the program normally. | |
| Work around the problem by removing hardware watchpoints if a step is | |
| requested, GDB will check for a hardware watchpoint trigger after the | |
| step anyway. */ | |
| if (CANNOT_STEP_HW_WATCHPOINTS && step) | |
| remove_hw_watchpoints (); | |
| /* Normally, by the time we reach `resume', the breakpoints are either | |
| removed or inserted, as appropriate. The exception is if we're sitting | |
| at a permanent breakpoint; we need to step over it, but permanent | |
| breakpoints can't be removed. So we have to test for it here. */ | |
| if (breakpoint_here_p (pc) == permanent_breakpoint_here) | |
| { | |
| if (gdbarch_skip_permanent_breakpoint_p (gdbarch)) | |
| gdbarch_skip_permanent_breakpoint (gdbarch, regcache); | |
| else | |
| error (_("\ | |
| The program is stopped at a permanent breakpoint, but GDB does not know\n\ | |
| how to step past a permanent breakpoint on this architecture. Try using\n\ | |
| a command like `return' or `jump' to continue execution.")); | |
| } | |
| /* If enabled, step over breakpoints by executing a copy of the | |
| instruction at a different address. | |
| We can't use displaced stepping when we have a signal to deliver; | |
| the comments for displaced_step_prepare explain why. The | |
| comments in the handle_inferior event for dealing with 'random | |
| signals' explain what we do instead. */ | |
| if (use_displaced_stepping (gdbarch) | |
| && stepping_over_breakpoint | |
| && sig == TARGET_SIGNAL_0) | |
| { | |
| if (!displaced_step_prepare (inferior_ptid)) | |
| { | |
| /* Got placed in displaced stepping queue. Will be resumed | |
| later when all the currently queued displaced stepping | |
| requests finish. */ | |
| discard_cleanups (old_cleanups); | |
| return; | |
| } | |
| } | |
| if (step && gdbarch_software_single_step_p (gdbarch)) | |
| { | |
| /* Do it the hard way, w/temp breakpoints */ | |
| if (gdbarch_software_single_step (gdbarch, get_current_frame ())) | |
| { | |
| /* ...and don't ask hardware to do it. */ | |
| step = 0; | |
| /* and do not pull these breakpoints until after a `wait' in | |
| `wait_for_inferior' */ | |
| singlestep_breakpoints_inserted_p = 1; | |
| singlestep_ptid = inferior_ptid; | |
| singlestep_pc = pc; | |
| } | |
| } | |
| /* If there were any forks/vforks/execs that were caught and are | |
| now to be followed, then do so. */ | |
| switch (pending_follow.kind) | |
| { | |
| case TARGET_WAITKIND_FORKED: | |
| case TARGET_WAITKIND_VFORKED: | |
| pending_follow.kind = TARGET_WAITKIND_SPURIOUS; | |
| if (follow_fork ()) | |
| should_resume = 0; | |
| break; | |
| case TARGET_WAITKIND_EXECD: | |
| /* follow_exec is called as soon as the exec event is seen. */ | |
| pending_follow.kind = TARGET_WAITKIND_SPURIOUS; | |
| break; | |
| default: | |
| break; | |
| } | |
| /* Install inferior's terminal modes. */ | |
| target_terminal_inferior (); | |
| if (should_resume) | |
| { | |
| ptid_t resume_ptid; | |
| resume_ptid = RESUME_ALL; /* Default */ | |
| /* If STEP is set, it's a request to use hardware stepping | |
| facilities. But in that case, we should never | |
| use singlestep breakpoint. */ | |
| gdb_assert (!(singlestep_breakpoints_inserted_p && step)); | |
| if (singlestep_breakpoints_inserted_p | |
| && stepping_past_singlestep_breakpoint) | |
| { | |
| /* The situation here is as follows. In thread T1 we wanted to | |
| single-step. Lacking hardware single-stepping we've | |
| set breakpoint at the PC of the next instruction -- call it | |
| P. After resuming, we've hit that breakpoint in thread T2. | |
| Now we've removed original breakpoint, inserted breakpoint | |
| at P+1, and try to step to advance T2 past breakpoint. | |
| We need to step only T2, as if T1 is allowed to freely run, | |
| it can run past P, and if other threads are allowed to run, | |
| they can hit breakpoint at P+1, and nested hits of single-step | |
| breakpoints is not something we'd want -- that's complicated | |
| to support, and has no value. */ | |
| resume_ptid = inferior_ptid; | |
| } | |
| if ((step || singlestep_breakpoints_inserted_p) | |
| && stepping_over_breakpoint) | |
| { | |
| /* We're allowing a thread to run past a breakpoint it has | |
| hit, by single-stepping the thread with the breakpoint | |
| removed. In which case, we need to single-step only this | |
| thread, and keep others stopped, as they can miss this | |
| breakpoint if allowed to run. | |
| The current code actually removes all breakpoints when | |
| doing this, not just the one being stepped over, so if we | |
| let other threads run, we can actually miss any | |
| breakpoint, not just the one at PC. */ | |
| resume_ptid = inferior_ptid; | |
| } | |
| if (non_stop) | |
| { | |
| /* With non-stop mode on, threads are always handled | |
| individually. */ | |
| resume_ptid = inferior_ptid; | |
| } | |
| else if ((scheduler_mode == schedlock_on) | |
| || (scheduler_mode == schedlock_step | |
| && (step || singlestep_breakpoints_inserted_p))) | |
| { | |
| /* User-settable 'scheduler' mode requires solo thread resume. */ | |
| resume_ptid = inferior_ptid; | |
| } | |
| if (gdbarch_cannot_step_breakpoint (gdbarch)) | |
| { | |
| /* Most targets can step a breakpoint instruction, thus | |
| executing it normally. But if this one cannot, just | |
| continue and we will hit it anyway. */ | |
| if (step && breakpoint_inserted_here_p (pc)) | |
| step = 0; | |
| } | |
| if (debug_displaced | |
| && use_displaced_stepping (gdbarch) | |
| && stepping_over_breakpoint) | |
| { | |
| struct regcache *resume_regcache = get_thread_regcache (resume_ptid); | |
| CORE_ADDR actual_pc = regcache_read_pc (resume_regcache); | |
| gdb_byte buf[4]; | |
| fprintf_unfiltered (gdb_stdlog, "displaced: run 0x%s: ", | |
| paddr_nz (actual_pc)); | |
| read_memory (actual_pc, buf, sizeof (buf)); | |
| displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf)); | |
| } | |
| target_resume (resume_ptid, step, sig); | |
| } | |
| discard_cleanups (old_cleanups); | |
| } | |
| /* Proceeding. */ | |
| /* Clear out all variables saying what to do when inferior is continued. | |
| First do this, then set the ones you want, then call `proceed'. */ | |
| void | |
| clear_proceed_status (void) | |
| { | |
| stepping_over_breakpoint = 0; | |
| step_range_start = 0; | |
| step_range_end = 0; | |
| step_frame_id = null_frame_id; | |
| step_over_calls = STEP_OVER_UNDEBUGGABLE; | |
| stop_after_trap = 0; | |
| stop_soon = NO_STOP_QUIETLY; | |
| proceed_to_finish = 0; | |
| breakpoint_proceeded = 1; /* We're about to proceed... */ | |
| if (stop_registers) | |
| { | |
| regcache_xfree (stop_registers); | |
| stop_registers = NULL; | |
| } | |
| /* Discard any remaining commands or status from previous stop. */ | |
| bpstat_clear (&stop_bpstat); | |
| } | |
| /* This should be suitable for any targets that support threads. */ | |
| static int | |
| prepare_to_proceed (int step) | |
| { | |
| ptid_t wait_ptid; | |
| struct target_waitstatus wait_status; | |
| /* Get the last target status returned by target_wait(). */ | |
| get_last_target_status (&wait_ptid, &wait_status); | |
| /* Make sure we were stopped at a breakpoint. */ | |
| if (wait_status.kind != TARGET_WAITKIND_STOPPED | |
| || wait_status.value.sig != TARGET_SIGNAL_TRAP) | |
| { | |
| return 0; | |
| } | |
| /* Switched over from WAIT_PID. */ | |
| if (!ptid_equal (wait_ptid, minus_one_ptid) | |
| && !ptid_equal (inferior_ptid, wait_ptid)) | |
| { | |
| struct regcache *regcache = get_thread_regcache (wait_ptid); | |
| if (breakpoint_here_p (regcache_read_pc (regcache))) | |
| { | |
| /* If stepping, remember current thread to switch back to. */ | |
| if (step) | |
| deferred_step_ptid = inferior_ptid; | |
| /* Switch back to WAIT_PID thread. */ | |
| switch_to_thread (wait_ptid); | |
| /* We return 1 to indicate that there is a breakpoint here, | |
| so we need to step over it before continuing to avoid | |
| hitting it straight away. */ | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Record the pc of the program the last time it stopped. This is | |
| just used internally by wait_for_inferior, but need to be preserved | |
| over calls to it and cleared when the inferior is started. */ | |
| static CORE_ADDR prev_pc; | |
| /* Basic routine for continuing the program in various fashions. | |
| ADDR is the address to resume at, or -1 for resume where stopped. | |
| SIGGNAL is the signal to give it, or 0 for none, | |
| or -1 for act according to how it stopped. | |
| STEP is nonzero if should trap after one instruction. | |
| -1 means return after that and print nothing. | |
| You should probably set various step_... variables | |
| before calling here, if you are stepping. | |
| You should call clear_proceed_status before calling proceed. */ | |
| void | |
| proceed (CORE_ADDR addr, enum target_signal siggnal, int step) | |
| { | |
| struct regcache *regcache = get_current_regcache (); | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| CORE_ADDR pc = regcache_read_pc (regcache); | |
| int oneproc = 0; | |
| if (step > 0) | |
| step_start_function = find_pc_function (pc); | |
| if (step < 0) | |
| stop_after_trap = 1; | |
| /* When GDB resume the inferior, process record target doesn't need to | |
| record the memory and register store operation of GDB. So set | |
| record_not_record to 1. */ | |
| if (RECORD_IS_USED) | |
| record_not_record_set (); | |
| if (addr == (CORE_ADDR) -1) | |
| { | |
| if (pc == stop_pc && breakpoint_here_p (pc) | |
| && execution_direction != EXEC_REVERSE) | |
| /* There is a breakpoint at the address we will resume at, | |
| step one instruction before inserting breakpoints so that | |
| we do not stop right away (and report a second hit at this | |
| breakpoint). | |
| Note, we don't do this in reverse, because we won't | |
| actually be executing the breakpoint insn anyway. | |
| We'll be (un-)executing the previous instruction. */ | |
| oneproc = 1; | |
| else if (gdbarch_single_step_through_delay_p (gdbarch) | |
| && gdbarch_single_step_through_delay (gdbarch, | |
| get_current_frame ())) | |
| /* We stepped onto an instruction that needs to be stepped | |
| again before re-inserting the breakpoint, do so. */ | |
| oneproc = 1; | |
| } | |
| else | |
| { | |
| regcache_write_pc (regcache, addr); | |
| } | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: proceed (addr=0x%s, signal=%d, step=%d)\n", | |
| paddr_nz (addr), siggnal, step); | |
| if (non_stop) | |
| /* In non-stop, each thread is handled individually. The context | |
| must already be set to the right thread here. */ | |
| ; | |
| else | |
| { | |
| /* In a multi-threaded task we may select another thread and | |
| then continue or step. | |
| But if the old thread was stopped at a breakpoint, it will | |
| immediately cause another breakpoint stop without any | |
| execution (i.e. it will report a breakpoint hit incorrectly). | |
| So we must step over it first. | |
| prepare_to_proceed checks the current thread against the | |
| thread that reported the most recent event. If a step-over | |
| is required it returns TRUE and sets the current thread to | |
| the old thread. */ | |
| if (prepare_to_proceed (step)) | |
| oneproc = 1; | |
| } | |
| if (oneproc) | |
| { | |
| stepping_over_breakpoint = 1; | |
| /* If displaced stepping is enabled, we can step over the | |
| breakpoint without hitting it, so leave all breakpoints | |
| inserted. Otherwise we need to disable all breakpoints, step | |
| one instruction, and then re-add them when that step is | |
| finished. */ | |
| if (!use_displaced_stepping (gdbarch)) | |
| remove_breakpoints (); | |
| } | |
| /* We can insert breakpoints if we're not trying to step over one, | |
| or if we are stepping over one but we're using displaced stepping | |
| to do so. */ | |
| if (! stepping_over_breakpoint || use_displaced_stepping (gdbarch)) | |
| insert_breakpoints (); | |
| if (siggnal != TARGET_SIGNAL_DEFAULT) | |
| stop_signal = siggnal; | |
| /* If this signal should not be seen by program, | |
| give it zero. Used for debugging signals. */ | |
| else if (!signal_program[stop_signal]) | |
| stop_signal = TARGET_SIGNAL_0; | |
| annotate_starting (); | |
| /* Make sure that output from GDB appears before output from the | |
| inferior. */ | |
| gdb_flush (gdb_stdout); | |
| /* Refresh prev_pc value just prior to resuming. This used to be | |
| done in stop_stepping, however, setting prev_pc there did not handle | |
| scenarios such as inferior function calls or returning from | |
| a function via the return command. In those cases, the prev_pc | |
| value was not set properly for subsequent commands. The prev_pc value | |
| is used to initialize the starting line number in the ecs. With an | |
| invalid value, the gdb next command ends up stopping at the position | |
| represented by the next line table entry past our start position. | |
| On platforms that generate one line table entry per line, this | |
| is not a problem. However, on the ia64, the compiler generates | |
| extraneous line table entries that do not increase the line number. | |
| When we issue the gdb next command on the ia64 after an inferior call | |
| or a return command, we often end up a few instructions forward, still | |
| within the original line we started. | |
| An attempt was made to have init_execution_control_state () refresh | |
| the prev_pc value before calculating the line number. This approach | |
| did not work because on platforms that use ptrace, the pc register | |
| cannot be read unless the inferior is stopped. At that point, we | |
| are not guaranteed the inferior is stopped and so the regcache_read_pc () | |
| call can fail. Setting the prev_pc value here ensures the value is | |
| updated correctly when the inferior is stopped. */ | |
| prev_pc = regcache_read_pc (get_current_regcache ()); | |
| /* Fill in with reasonable starting values. */ | |
| init_thread_stepping_state (tss); | |
| /* We'll update this if & when we switch to a new thread. */ | |
| previous_inferior_ptid = inferior_ptid; | |
| /* Reset to normal state. */ | |
| init_infwait_state (); | |
| /* Resume inferior. */ | |
| resume (oneproc || step || bpstat_should_step (), stop_signal); | |
| /* Wait for it to stop (if not standalone) | |
| and in any case decode why it stopped, and act accordingly. */ | |
| /* Do this only if we are not using the event loop, or if the target | |
| does not support asynchronous execution. */ | |
| if (!target_can_async_p ()) | |
| { | |
| wait_for_inferior (0); | |
| normal_stop (); | |
| } | |
| } | |
| /* Start remote-debugging of a machine over a serial link. */ | |
| void | |
| start_remote (int from_tty) | |
| { | |
| init_wait_for_inferior (); | |
| stop_soon = STOP_QUIETLY_REMOTE; | |
| stepping_over_breakpoint = 0; | |
| /* Always go on waiting for the target, regardless of the mode. */ | |
| /* FIXME: cagney/1999-09-23: At present it isn't possible to | |
| indicate to wait_for_inferior that a target should timeout if | |
| nothing is returned (instead of just blocking). Because of this, | |
| targets expecting an immediate response need to, internally, set | |
| things up so that the target_wait() is forced to eventually | |
| timeout. */ | |
| /* FIXME: cagney/1999-09-24: It isn't possible for target_open() to | |
| differentiate to its caller what the state of the target is after | |
| the initial open has been performed. Here we're assuming that | |
| the target has stopped. It should be possible to eventually have | |
| target_open() return to the caller an indication that the target | |
| is currently running and GDB state should be set to the same as | |
| for an async run. */ | |
| wait_for_inferior (0); | |
| /* Now that the inferior has stopped, do any bookkeeping like | |
| loading shared libraries. We want to do this before normal_stop, | |
| so that the displayed frame is up to date. */ | |
| post_create_inferior (¤t_target, from_tty); | |
| normal_stop (); | |
| } | |
| /* Initialize static vars when a new inferior begins. */ | |
| void | |
| init_wait_for_inferior (void) | |
| { | |
| /* These are meaningless until the first time through wait_for_inferior. */ | |
| prev_pc = 0; | |
| breakpoint_init_inferior (inf_starting); | |
| /* Don't confuse first call to proceed(). */ | |
| stop_signal = TARGET_SIGNAL_0; | |
| /* The first resume is not following a fork/vfork/exec. */ | |
| pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */ | |
| clear_proceed_status (); | |
| stepping_past_singlestep_breakpoint = 0; | |
| deferred_step_ptid = null_ptid; | |
| target_last_wait_ptid = minus_one_ptid; | |
| init_thread_stepping_state (tss); | |
| previous_inferior_ptid = null_ptid; | |
| init_infwait_state (); | |
| displaced_step_clear (); | |
| } | |
| /* This enum encodes possible reasons for doing a target_wait, so that | |
| wfi can call target_wait in one place. (Ultimately the call will be | |
| moved out of the infinite loop entirely.) */ | |
| enum infwait_states | |
| { | |
| infwait_normal_state, | |
| infwait_thread_hop_state, | |
| infwait_step_watch_state, | |
| infwait_nonstep_watch_state | |
| }; | |
| /* Why did the inferior stop? Used to print the appropriate messages | |
| to the interface from within handle_inferior_event(). */ | |
| enum inferior_stop_reason | |
| { | |
| /* Step, next, nexti, stepi finished. */ | |
| END_STEPPING_RANGE, | |
| /* Inferior terminated by signal. */ | |
| SIGNAL_EXITED, | |
| /* Inferior exited. */ | |
| EXITED, | |
| /* Inferior received signal, and user asked to be notified. */ | |
| SIGNAL_RECEIVED, | |
| /* Reverse execution -- target ran out of history info. */ | |
| NO_HISTORY | |
| }; | |
| /* The PTID we'll do a target_wait on.*/ | |
| ptid_t waiton_ptid; | |
| /* Current inferior wait state. */ | |
| enum infwait_states infwait_state; | |
| /* Data to be passed around while handling an event. This data is | |
| discarded between events. */ | |
| struct execution_control_state | |
| { | |
| ptid_t ptid; | |
| struct target_waitstatus ws; | |
| int random_signal; | |
| CORE_ADDR stop_func_start; | |
| CORE_ADDR stop_func_end; | |
| char *stop_func_name; | |
| int new_thread_event; | |
| int wait_some_more; | |
| }; | |
| void init_execution_control_state (struct execution_control_state *ecs); | |
| void handle_inferior_event (struct execution_control_state *ecs); | |
| static void handle_step_into_function (struct execution_control_state *ecs); | |
| static void handle_step_into_function_backward (struct execution_control_state *ecs); | |
| static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame); | |
| static void insert_step_resume_breakpoint_at_caller (struct frame_info *); | |
| static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal, | |
| struct frame_id sr_id); | |
| static void insert_longjmp_resume_breakpoint (CORE_ADDR); | |
| static void stop_stepping (struct execution_control_state *ecs); | |
| static void prepare_to_wait (struct execution_control_state *ecs); | |
| static void keep_going (struct execution_control_state *ecs); | |
| static void print_stop_reason (enum inferior_stop_reason stop_reason, | |
| int stop_info); | |
| /* Wait for control to return from inferior to debugger. | |
| If TREAT_EXEC_AS_SIGTRAP is non-zero, then handle EXEC signals | |
| as if they were SIGTRAP signals. This can be useful during | |
| the startup sequence on some targets such as HP/UX, where | |
| we receive an EXEC event instead of the expected SIGTRAP. | |
| If inferior gets a signal, we may decide to start it up again | |
| instead of returning. That is why there is a loop in this function. | |
| When this function actually returns it means the inferior | |
| should be left stopped and GDB should read more commands. */ | |
| void | |
| wait_for_inferior (int treat_exec_as_sigtrap) | |
| { | |
| struct cleanup *old_cleanups; | |
| struct execution_control_state ecss; | |
| struct execution_control_state *ecs; | |
| if (debug_infrun) | |
| fprintf_unfiltered | |
| (gdb_stdlog, "infrun: wait_for_inferior (treat_exec_as_sigtrap=%d)\n", | |
| treat_exec_as_sigtrap); | |
| old_cleanups = make_cleanup (delete_step_resume_breakpoint, | |
| &step_resume_breakpoint); | |
| ecs = &ecss; | |
| memset (ecs, 0, sizeof (*ecs)); | |
| overlay_cache_invalid = 1; | |
| /* We have to invalidate the registers BEFORE calling target_wait | |
| because they can be loaded from the target while in target_wait. | |
| This makes remote debugging a bit more efficient for those | |
| targets that provide critical registers as part of their normal | |
| status mechanism. */ | |
| registers_changed (); | |
| while (1) | |
| { | |
| if (deprecated_target_wait_hook) | |
| ecs->ptid = deprecated_target_wait_hook (waiton_ptid, &ecs->ws); | |
| else | |
| ecs->ptid = target_wait (waiton_ptid, &ecs->ws); | |
| if (treat_exec_as_sigtrap && ecs->ws.kind == TARGET_WAITKIND_EXECD) | |
| { | |
| xfree (ecs->ws.value.execd_pathname); | |
| ecs->ws.kind = TARGET_WAITKIND_STOPPED; | |
| ecs->ws.value.sig = TARGET_SIGNAL_TRAP; | |
| } | |
| /* Now figure out what to do with the result of the result. */ | |
| handle_inferior_event (ecs); | |
| if (!ecs->wait_some_more) | |
| break; | |
| } | |
| do_cleanups (old_cleanups); | |
| } | |
| /* Asynchronous version of wait_for_inferior. It is called by the | |
| event loop whenever a change of state is detected on the file | |
| descriptor corresponding to the target. It can be called more than | |
| once to complete a single execution command. In such cases we need | |
| to keep the state in a global variable ECSS. If it is the last time | |
| that this function is called for a single execution command, then | |
| report to the user that the inferior has stopped, and do the | |
| necessary cleanups. */ | |
| void | |
| fetch_inferior_event (void *client_data) | |
| { | |
| struct execution_control_state ecss; | |
| struct execution_control_state *ecs = &ecss; | |
| struct cleanup *old_chain = make_cleanup (null_cleanup, NULL); | |
| int was_sync = sync_execution; | |
| memset (ecs, 0, sizeof (*ecs)); | |
| overlay_cache_invalid = 1; | |
| if (non_stop) | |
| /* In non-stop mode, the user/frontend should not notice a thread | |
| switch due to internal events. Make sure we reverse to the | |
| user selected thread and frame after handling the event and | |
| running any breakpoint commands. */ | |
| make_cleanup_restore_current_thread (); | |
| /* We have to invalidate the registers BEFORE calling target_wait | |
| because they can be loaded from the target while in target_wait. | |
| This makes remote debugging a bit more efficient for those | |
| targets that provide critical registers as part of their normal | |
| status mechanism. */ | |
| registers_changed (); | |
| if (deprecated_target_wait_hook) | |
| ecs->ptid = | |
| deprecated_target_wait_hook (waiton_ptid, &ecs->ws); | |
| else | |
| ecs->ptid = target_wait (waiton_ptid, &ecs->ws); | |
| if (non_stop | |
| && ecs->ws.kind != TARGET_WAITKIND_IGNORE | |
| && ecs->ws.kind != TARGET_WAITKIND_EXITED | |
| && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED) | |
| /* In non-stop mode, each thread is handled individually. Switch | |
| early, so the global state is set correctly for this | |
| thread. */ | |
| context_switch (ecs->ptid); | |
| /* Now figure out what to do with the result of the result. */ | |
| handle_inferior_event (ecs); | |
| if (!ecs->wait_some_more) | |
| { | |
| delete_step_resume_breakpoint (&step_resume_breakpoint); | |
| normal_stop (); | |
| if (step_multi && stop_step) | |
| inferior_event_handler (INF_EXEC_CONTINUE, NULL); | |
| else | |
| inferior_event_handler (INF_EXEC_COMPLETE, NULL); | |
| } | |
| /* Revert thread and frame. */ | |
| do_cleanups (old_chain); | |
| /* If the inferior was in sync execution mode, and now isn't, | |
| restore the prompt. */ | |
| if (was_sync && !sync_execution) | |
| display_gdb_prompt (0); | |
| } | |
| /* Prepare an execution control state for looping through a | |
| wait_for_inferior-type loop. */ | |
| void | |
| init_execution_control_state (struct execution_control_state *ecs) | |
| { | |
| ecs->random_signal = 0; | |
| } | |
| /* Clear context switchable stepping state. */ | |
| void | |
| init_thread_stepping_state (struct thread_stepping_state *tss) | |
| { | |
| struct symtab_and_line sal; | |
| tss->stepping_over_breakpoint = 0; | |
| tss->step_after_step_resume_breakpoint = 0; | |
| tss->stepping_through_solib_after_catch = 0; | |
| tss->stepping_through_solib_catchpoints = NULL; | |
| sal = find_pc_line (prev_pc, 0); | |
| tss->current_line = sal.line; | |
| tss->current_symtab = sal.symtab; | |
| } | |
| /* Return the cached copy of the last pid/waitstatus returned by | |
| target_wait()/deprecated_target_wait_hook(). The data is actually | |
| cached by handle_inferior_event(), which gets called immediately | |
| after target_wait()/deprecated_target_wait_hook(). */ | |
| void | |
| get_last_target_status (ptid_t *ptidp, struct target_waitstatus *status) | |
| { | |
| *ptidp = target_last_wait_ptid; | |
| *status = target_last_waitstatus; | |
| } | |
| void | |
| nullify_last_target_wait_ptid (void) | |
| { | |
| target_last_wait_ptid = minus_one_ptid; | |
| } | |
| /* Switch thread contexts, maintaining "infrun state". */ | |
| static void | |
| context_switch (ptid_t ptid) | |
| { | |
| /* Caution: it may happen that the new thread (or the old one!) | |
| is not in the thread list. In this case we must not attempt | |
| to "switch context", or we run the risk that our context may | |
| be lost. This may happen as a result of the target module | |
| mishandling thread creation. */ | |
| if (debug_infrun) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ", | |
| target_pid_to_str (inferior_ptid)); | |
| fprintf_unfiltered (gdb_stdlog, "to %s\n", | |
| target_pid_to_str (ptid)); | |
| } | |
| if (in_thread_list (inferior_ptid) && in_thread_list (ptid)) | |
| { /* Perform infrun state context switch: */ | |
| /* Save infrun state for the old thread. */ | |
| save_infrun_state (inferior_ptid, prev_pc, | |
| stepping_over_breakpoint, step_resume_breakpoint, | |
| step_range_start, | |
| step_range_end, &step_frame_id, | |
| tss->stepping_over_breakpoint, | |
| tss->stepping_through_solib_after_catch, | |
| tss->stepping_through_solib_catchpoints, | |
| tss->current_line, tss->current_symtab, | |
| cmd_continuation, intermediate_continuation, | |
| proceed_to_finish, | |
| step_over_calls, | |
| stop_step, | |
| step_multi, | |
| stop_signal, | |
| stop_bpstat); | |
| /* Load infrun state for the new thread. */ | |
| load_infrun_state (ptid, &prev_pc, | |
| &stepping_over_breakpoint, &step_resume_breakpoint, | |
| &step_range_start, | |
| &step_range_end, &step_frame_id, | |
| &tss->stepping_over_breakpoint, | |
| &tss->stepping_through_solib_after_catch, | |
| &tss->stepping_through_solib_catchpoints, | |
| &tss->current_line, &tss->current_symtab, | |
| &cmd_continuation, &intermediate_continuation, | |
| &proceed_to_finish, | |
| &step_over_calls, | |
| &stop_step, | |
| &step_multi, | |
| &stop_signal, | |
| &stop_bpstat); | |
| } | |
| switch_to_thread (ptid); | |
| } | |
| /* Context switch to thread PTID. */ | |
| ptid_t | |
| context_switch_to (ptid_t ptid) | |
| { | |
| ptid_t current_ptid = inferior_ptid; | |
| /* Context switch to the new thread. */ | |
| if (!ptid_equal (ptid, inferior_ptid)) | |
| { | |
| context_switch (ptid); | |
| } | |
| return current_ptid; | |
| } | |
| static void | |
| adjust_pc_after_break (struct execution_control_state *ecs) | |
| { | |
| struct regcache *regcache = get_thread_regcache (ecs->ptid); | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| CORE_ADDR breakpoint_pc; | |
| /* If this target does not decrement the PC after breakpoints, then | |
| we have nothing to do. */ | |
| if (gdbarch_decr_pc_after_break (gdbarch) == 0) | |
| return; | |
| /* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If | |
| we aren't, just return. | |
| We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not | |
| affected by gdbarch_decr_pc_after_break. Other waitkinds which are | |
| implemented by software breakpoints should be handled through the normal | |
| breakpoint layer. | |
| NOTE drow/2004-01-31: On some targets, breakpoints may generate | |
| different signals (SIGILL or SIGEMT for instance), but it is less | |
| clear where the PC is pointing afterwards. It may not match | |
| gdbarch_decr_pc_after_break. I don't know any specific target that | |
| generates these signals at breakpoints (the code has been in GDB since at | |
| least 1992) so I can not guess how to handle them here. | |
| In earlier versions of GDB, a target with | |
| gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a | |
| watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any | |
| target with both of these set in GDB history, and it seems unlikely to be | |
| correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */ | |
| if (ecs->ws.kind != TARGET_WAITKIND_STOPPED) | |
| return; | |
| if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP) | |
| return; | |
| /* Find the location where (if we've hit a breakpoint) the | |
| breakpoint would be. */ | |
| breakpoint_pc = regcache_read_pc (regcache) | |
| - gdbarch_decr_pc_after_break (gdbarch); | |
| /* Check whether there actually is a software breakpoint inserted | |
| at that location. */ | |
| if (software_breakpoint_inserted_here_p (breakpoint_pc)) | |
| { | |
| /* When using hardware single-step, a SIGTRAP is reported for both | |
| a completed single-step and a software breakpoint. Need to | |
| differentiate between the two, as the latter needs adjusting | |
| but the former does not. | |
| The SIGTRAP can be due to a completed hardware single-step only if | |
| - we didn't insert software single-step breakpoints | |
| - the thread to be examined is still the current thread | |
| - this thread is currently being stepped | |
| If any of these events did not occur, we must have stopped due | |
| to hitting a software breakpoint, and have to back up to the | |
| breakpoint address. | |
| As a special case, we could have hardware single-stepped a | |
| software breakpoint. In this case (prev_pc == breakpoint_pc), | |
| we also need to back up to the breakpoint address. */ | |
| if (singlestep_breakpoints_inserted_p | |
| || !ptid_equal (ecs->ptid, inferior_ptid) | |
| || !currently_stepping (tss) | |
| || prev_pc == breakpoint_pc) | |
| regcache_write_pc (regcache, breakpoint_pc); | |
| } | |
| } | |
| void | |
| init_infwait_state (void) | |
| { | |
| waiton_ptid = pid_to_ptid (-1); | |
| infwait_state = infwait_normal_state; | |
| } | |
| void | |
| error_is_running (void) | |
| { | |
| error (_("\ | |
| Cannot execute this command while the selected thread is running.")); | |
| } | |
| void | |
| ensure_not_running (void) | |
| { | |
| if (is_running (inferior_ptid)) | |
| error_is_running (); | |
| } | |
| /* Given an execution control state that has been freshly filled in | |
| by an event from the inferior, figure out what it means and take | |
| appropriate action. */ | |
| void | |
| handle_inferior_event (struct execution_control_state *ecs) | |
| { | |
| int sw_single_step_trap_p = 0; | |
| int stopped_by_watchpoint; | |
| int stepped_after_stopped_by_watchpoint = 0; | |
| struct symtab_and_line stop_pc_sal; | |
| /* Reset reverse_resume_need_step to 0. */ | |
| reverse_resume_need_step = 0; | |
| breakpoint_retire_moribund (); | |
| /* Cache the last pid/waitstatus. */ | |
| target_last_wait_ptid = ecs->ptid; | |
| target_last_waitstatus = ecs->ws; | |
| /* Always clear state belonging to the previous time we stopped. */ | |
| stop_stack_dummy = 0; | |
| adjust_pc_after_break (ecs); | |
| reinit_frame_cache (); | |
| /* If it's a new process, add it to the thread database */ | |
| ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid) | |
| && !ptid_equal (ecs->ptid, minus_one_ptid) | |
| && !in_thread_list (ecs->ptid)); | |
| if (ecs->ws.kind != TARGET_WAITKIND_EXITED | |
| && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event) | |
| add_thread (ecs->ptid); | |
| if (ecs->ws.kind != TARGET_WAITKIND_IGNORE) | |
| { | |
| /* Mark the non-executing threads accordingly. */ | |
| if (!non_stop | |
| || ecs->ws.kind == TARGET_WAITKIND_EXITED | |
| || ecs->ws.kind == TARGET_WAITKIND_SIGNALLED) | |
| set_executing (pid_to_ptid (-1), 0); | |
| else | |
| set_executing (ecs->ptid, 0); | |
| } | |
| switch (infwait_state) | |
| { | |
| case infwait_thread_hop_state: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n"); | |
| /* Cancel the waiton_ptid. */ | |
| waiton_ptid = pid_to_ptid (-1); | |
| break; | |
| case infwait_normal_state: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n"); | |
| break; | |
| case infwait_step_watch_state: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: infwait_step_watch_state\n"); | |
| stepped_after_stopped_by_watchpoint = 1; | |
| break; | |
| case infwait_nonstep_watch_state: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: infwait_nonstep_watch_state\n"); | |
| insert_breakpoints (); | |
| /* FIXME-maybe: is this cleaner than setting a flag? Does it | |
| handle things like signals arriving and other things happening | |
| in combination correctly? */ | |
| stepped_after_stopped_by_watchpoint = 1; | |
| break; | |
| default: | |
| internal_error (__FILE__, __LINE__, _("bad switch")); | |
| } | |
| infwait_state = infwait_normal_state; | |
| switch (ecs->ws.kind) | |
| { | |
| case TARGET_WAITKIND_LOADED: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n"); | |
| /* Ignore gracefully during startup of the inferior, as it might | |
| be the shell which has just loaded some objects, otherwise | |
| add the symbols for the newly loaded objects. Also ignore at | |
| the beginning of an attach or remote session; we will query | |
| the full list of libraries once the connection is | |
| established. */ | |
| if (stop_soon == NO_STOP_QUIETLY) | |
| { | |
| /* Check for any newly added shared libraries if we're | |
| supposed to be adding them automatically. Switch | |
| terminal for any messages produced by | |
| breakpoint_re_set. */ | |
| target_terminal_ours_for_output (); | |
| /* NOTE: cagney/2003-11-25: Make certain that the target | |
| stack's section table is kept up-to-date. Architectures, | |
| (e.g., PPC64), use the section table to perform | |
| operations such as address => section name and hence | |
| require the table to contain all sections (including | |
| those found in shared libraries). */ | |
| /* NOTE: cagney/2003-11-25: Pass current_target and not | |
| exec_ops to SOLIB_ADD. This is because current GDB is | |
| only tooled to propagate section_table changes out from | |
| the "current_target" (see target_resize_to_sections), and | |
| not up from the exec stratum. This, of course, isn't | |
| right. "infrun.c" should only interact with the | |
| exec/process stratum, instead relying on the target stack | |
| to propagate relevant changes (stop, section table | |
| changed, ...) up to other layers. */ | |
| #ifdef SOLIB_ADD | |
| SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add); | |
| #else | |
| solib_add (NULL, 0, ¤t_target, auto_solib_add); | |
| #endif | |
| target_terminal_inferior (); | |
| /* If requested, stop when the dynamic linker notifies | |
| gdb of events. This allows the user to get control | |
| and place breakpoints in initializer routines for | |
| dynamically loaded objects (among other things). */ | |
| if (stop_on_solib_events) | |
| { | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| /* NOTE drow/2007-05-11: This might be a good place to check | |
| for "catch load". */ | |
| } | |
| /* If we are skipping through a shell, or through shared library | |
| loading that we aren't interested in, resume the program. If | |
| we're running the program normally, also resume. But stop if | |
| we're attaching or setting up a remote connection. */ | |
| if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY) | |
| { | |
| /* Loading of shared libraries might have changed breakpoint | |
| addresses. Make sure new breakpoints are inserted. */ | |
| if (stop_soon == NO_STOP_QUIETLY | |
| && !breakpoints_always_inserted_mode ()) | |
| insert_breakpoints (); | |
| resume (0, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| } | |
| break; | |
| case TARGET_WAITKIND_SPURIOUS: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n"); | |
| resume (0, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| case TARGET_WAITKIND_EXITED: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n"); | |
| target_terminal_ours (); /* Must do this before mourn anyway */ | |
| print_stop_reason (EXITED, ecs->ws.value.integer); | |
| /* Record the exit code in the convenience variable $_exitcode, so | |
| that the user can inspect this again later. */ | |
| set_internalvar (lookup_internalvar ("_exitcode"), | |
| value_from_longest (builtin_type_int, | |
| (LONGEST) ecs->ws.value.integer)); | |
| gdb_flush (gdb_stdout); | |
| target_mourn_inferior (); | |
| singlestep_breakpoints_inserted_p = 0; | |
| stop_print_frame = 0; | |
| stop_stepping (ecs); | |
| return; | |
| case TARGET_WAITKIND_SIGNALLED: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n"); | |
| stop_print_frame = 0; | |
| stop_signal = ecs->ws.value.sig; | |
| target_terminal_ours (); /* Must do this before mourn anyway */ | |
| /* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't | |
| reach here unless the inferior is dead. However, for years | |
| target_kill() was called here, which hints that fatal signals aren't | |
| really fatal on some systems. If that's true, then some changes | |
| may be needed. */ | |
| target_mourn_inferior (); | |
| print_stop_reason (SIGNAL_EXITED, stop_signal); | |
| singlestep_breakpoints_inserted_p = 0; | |
| stop_stepping (ecs); | |
| return; | |
| /* The following are the only cases in which we keep going; | |
| the above cases end in a continue or goto. */ | |
| case TARGET_WAITKIND_FORKED: | |
| case TARGET_WAITKIND_VFORKED: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n"); | |
| stop_signal = TARGET_SIGNAL_TRAP; | |
| pending_follow.kind = ecs->ws.kind; | |
| pending_follow.fork_event.parent_pid = ecs->ptid; | |
| pending_follow.fork_event.child_pid = ecs->ws.value.related_pid; | |
| if (!ptid_equal (ecs->ptid, inferior_ptid)) | |
| { | |
| context_switch (ecs->ptid); | |
| reinit_frame_cache (); | |
| } | |
| stop_pc = read_pc (); | |
| stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid); | |
| ecs->random_signal = !bpstat_explains_signal (stop_bpstat); | |
| /* If no catchpoint triggered for this, then keep going. */ | |
| if (ecs->random_signal) | |
| { | |
| stop_signal = TARGET_SIGNAL_0; | |
| keep_going (ecs); | |
| return; | |
| } | |
| goto process_event_stop_test; | |
| case TARGET_WAITKIND_EXECD: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n"); | |
| stop_signal = TARGET_SIGNAL_TRAP; | |
| pending_follow.execd_pathname = | |
| savestring (ecs->ws.value.execd_pathname, | |
| strlen (ecs->ws.value.execd_pathname)); | |
| /* This causes the eventpoints and symbol table to be reset. Must | |
| do this now, before trying to determine whether to stop. */ | |
| follow_exec (inferior_ptid, pending_follow.execd_pathname); | |
| xfree (pending_follow.execd_pathname); | |
| stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); | |
| { | |
| /* The breakpoints module may need to touch the inferior's | |
| memory. Switch to the (stopped) event ptid | |
| momentarily. */ | |
| ptid_t saved_inferior_ptid = inferior_ptid; | |
| inferior_ptid = ecs->ptid; | |
| stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid); | |
| ecs->random_signal = !bpstat_explains_signal (stop_bpstat); | |
| inferior_ptid = saved_inferior_ptid; | |
| } | |
| if (!ptid_equal (ecs->ptid, inferior_ptid)) | |
| { | |
| context_switch (ecs->ptid); | |
| reinit_frame_cache (); | |
| } | |
| /* If no catchpoint triggered for this, then keep going. */ | |
| if (ecs->random_signal) | |
| { | |
| stop_signal = TARGET_SIGNAL_0; | |
| keep_going (ecs); | |
| return; | |
| } | |
| goto process_event_stop_test; | |
| /* Be careful not to try to gather much state about a thread | |
| that's in a syscall. It's frequently a losing proposition. */ | |
| case TARGET_WAITKIND_SYSCALL_ENTRY: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n"); | |
| resume (0, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| /* Before examining the threads further, step this thread to | |
| get it entirely out of the syscall. (We get notice of the | |
| event when the thread is just on the verge of exiting a | |
| syscall. Stepping one instruction seems to get it back | |
| into user code.) */ | |
| case TARGET_WAITKIND_SYSCALL_RETURN: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n"); | |
| target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| case TARGET_WAITKIND_STOPPED: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n"); | |
| stop_signal = ecs->ws.value.sig; | |
| break; | |
| case TARGET_WAITKIND_NO_HISTORY: | |
| /* Reverse execution: target ran out of history info. */ | |
| print_stop_reason (NO_HISTORY, 0); | |
| stop_stepping (ecs); | |
| return; | |
| /* We had an event in the inferior, but we are not interested | |
| in handling it at this level. The lower layers have already | |
| done what needs to be done, if anything. | |
| One of the possible circumstances for this is when the | |
| inferior produces output for the console. The inferior has | |
| not stopped, and we are ignoring the event. Another possible | |
| circumstance is any event which the lower level knows will be | |
| reported multiple times without an intervening resume. */ | |
| case TARGET_WAITKIND_IGNORE: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n"); | |
| prepare_to_wait (ecs); | |
| return; | |
| } | |
| if (ecs->new_thread_event) | |
| { | |
| if (non_stop) | |
| /* Non-stop assumes that the target handles adding new threads | |
| to the thread list. */ | |
| internal_error (__FILE__, __LINE__, "\ | |
| targets should add new threads to the thread list themselves in non-stop mode."); | |
| /* We may want to consider not doing a resume here in order to | |
| give the user a chance to play with the new thread. It might | |
| be good to make that a user-settable option. */ | |
| /* At this point, all threads are stopped (happens automatically | |
| in either the OS or the native code). Therefore we need to | |
| continue all threads in order to make progress. */ | |
| target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| } | |
| /* Do we need to clean up the state of a thread that has completed a | |
| displaced single-step? (Doing so usually affects the PC, so do | |
| it here, before we set stop_pc.) */ | |
| displaced_step_fixup (ecs->ptid, stop_signal); | |
| stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); | |
| if (debug_infrun) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", | |
| paddr_nz (stop_pc)); | |
| if (STOPPED_BY_WATCHPOINT (&ecs->ws)) | |
| { | |
| CORE_ADDR addr; | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stopped by watchpoint\n"); | |
| if (target_stopped_data_address (¤t_target, &addr)) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: stopped data address = 0x%s\n", | |
| paddr_nz (addr)); | |
| else | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: (no data address available)\n"); | |
| } | |
| } | |
| if (stepping_past_singlestep_breakpoint) | |
| { | |
| gdb_assert (singlestep_breakpoints_inserted_p); | |
| gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid)); | |
| gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid)); | |
| stepping_past_singlestep_breakpoint = 0; | |
| /* We've either finished single-stepping past the single-step | |
| breakpoint, or stopped for some other reason. It would be nice if | |
| we could tell, but we can't reliably. */ | |
| if (stop_signal == TARGET_SIGNAL_TRAP) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n"); | |
| /* Pull the single step breakpoints out of the target. */ | |
| remove_single_step_breakpoints (); | |
| singlestep_breakpoints_inserted_p = 0; | |
| ecs->random_signal = 0; | |
| context_switch (saved_singlestep_ptid); | |
| if (deprecated_context_hook) | |
| deprecated_context_hook (pid_to_thread_id (ecs->ptid)); | |
| resume (1, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| } | |
| } | |
| stepping_past_singlestep_breakpoint = 0; | |
| if (!ptid_equal (deferred_step_ptid, null_ptid)) | |
| { | |
| /* In non-stop mode, there's never a deferred_step_ptid set. */ | |
| gdb_assert (!non_stop); | |
| /* If we stopped for some other reason than single-stepping, ignore | |
| the fact that we were supposed to switch back. */ | |
| if (stop_signal == TARGET_SIGNAL_TRAP) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: handling deferred step\n"); | |
| /* Pull the single step breakpoints out of the target. */ | |
| if (singlestep_breakpoints_inserted_p) | |
| { | |
| remove_single_step_breakpoints (); | |
| singlestep_breakpoints_inserted_p = 0; | |
| } | |
| /* Note: We do not call context_switch at this point, as the | |
| context is already set up for stepping the original thread. */ | |
| switch_to_thread (deferred_step_ptid); | |
| deferred_step_ptid = null_ptid; | |
| /* Suppress spurious "Switching to ..." message. */ | |
| previous_inferior_ptid = inferior_ptid; | |
| resume (1, TARGET_SIGNAL_0); | |
| prepare_to_wait (ecs); | |
| return; | |
| } | |
| deferred_step_ptid = null_ptid; | |
| } | |
| /* See if a thread hit a thread-specific breakpoint that was meant for | |
| another thread. If so, then step that thread past the breakpoint, | |
| and continue it. */ | |
| if (stop_signal == TARGET_SIGNAL_TRAP) | |
| { | |
| int thread_hop_needed = 0; | |
| /* Check if a regular breakpoint has been hit before checking | |
| for a potential single step breakpoint. Otherwise, GDB will | |
| not see this breakpoint hit when stepping onto breakpoints. */ | |
| if (regular_breakpoint_inserted_here_p (stop_pc)) | |
| { | |
| ecs->random_signal = 0; | |
| if (!breakpoint_thread_match (stop_pc, ecs->ptid)) | |
| thread_hop_needed = 1; | |
| } | |
| else if (singlestep_breakpoints_inserted_p) | |
| { | |
| /* We have not context switched yet, so this should be true | |
| no matter which thread hit the singlestep breakpoint. */ | |
| gdb_assert (ptid_equal (inferior_ptid, singlestep_ptid)); | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: software single step " | |
| "trap for %s\n", | |
| target_pid_to_str (ecs->ptid)); | |
| ecs->random_signal = 0; | |
| /* The call to in_thread_list is necessary because PTIDs sometimes | |
| change when we go from single-threaded to multi-threaded. If | |
| the singlestep_ptid is still in the list, assume that it is | |
| really different from ecs->ptid. */ | |
| if (!ptid_equal (singlestep_ptid, ecs->ptid) | |
| && in_thread_list (singlestep_ptid)) | |
| { | |
| /* If the PC of the thread we were trying to single-step | |
| has changed, discard this event (which we were going | |
| to ignore anyway), and pretend we saw that thread | |
| trap. This prevents us continuously moving the | |
| single-step breakpoint forward, one instruction at a | |
| time. If the PC has changed, then the thread we were | |
| trying to single-step has trapped or been signalled, | |
| but the event has not been reported to GDB yet. | |
| There might be some cases where this loses signal | |
| information, if a signal has arrived at exactly the | |
| same time that the PC changed, but this is the best | |
| we can do with the information available. Perhaps we | |
| should arrange to report all events for all threads | |
| when they stop, or to re-poll the remote looking for | |
| this particular thread (i.e. temporarily enable | |
| schedlock). */ | |
| CORE_ADDR new_singlestep_pc | |
| = regcache_read_pc (get_thread_regcache (singlestep_ptid)); | |
| if (new_singlestep_pc != singlestep_pc) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread," | |
| " but expected thread advanced also\n"); | |
| /* The current context still belongs to | |
| singlestep_ptid. Don't swap here, since that's | |
| the context we want to use. Just fudge our | |
| state and continue. */ | |
| ecs->ptid = singlestep_ptid; | |
| stop_pc = new_singlestep_pc; | |
| } | |
| else | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: unexpected thread\n"); | |
| thread_hop_needed = 1; | |
| stepping_past_singlestep_breakpoint = 1; | |
| saved_singlestep_ptid = singlestep_ptid; | |
| } | |
| } | |
| } | |
| if (thread_hop_needed) | |
| { | |
| int remove_status = 0; | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n"); | |
| /* Saw a breakpoint, but it was hit by the wrong thread. | |
| Just continue. */ | |
| if (singlestep_breakpoints_inserted_p) | |
| { | |
| /* Pull the single step breakpoints out of the target. */ | |
| remove_single_step_breakpoints (); | |
| singlestep_breakpoints_inserted_p = 0; | |
| } | |
| /* If the arch can displace step, don't remove the | |
| breakpoints. */ | |
| if (!use_displaced_stepping (current_gdbarch)) | |
| remove_status = remove_breakpoints (); | |
| /* Did we fail to remove breakpoints? If so, try | |
| to set the PC past the bp. (There's at least | |
| one situation in which we can fail to remove | |
| the bp's: On HP-UX's that use ttrace, we can't | |
| change the address space of a vforking child | |
| process until the child exits (well, okay, not | |
| then either :-) or execs. */ | |
| if (remove_status != 0) | |
| error (_("Cannot step over breakpoint hit in wrong thread")); | |
| else | |
| { /* Single step */ | |
| if (!ptid_equal (inferior_ptid, ecs->ptid)) | |
| context_switch (ecs->ptid); | |
| if (!non_stop) | |
| { | |
| /* Only need to require the next event from this | |
| thread in all-stop mode. */ | |
| waiton_ptid = ecs->ptid; | |
| infwait_state = infwait_thread_hop_state; | |
| } | |
| tss->stepping_over_breakpoint = 1; | |
| keep_going (ecs); | |
| registers_changed (); | |
| return; | |
| } | |
| } | |
| else if (singlestep_breakpoints_inserted_p) | |
| { | |
| sw_single_step_trap_p = 1; | |
| ecs->random_signal = 0; | |
| } | |
| } | |
| else | |
| ecs->random_signal = 1; | |
| /* See if something interesting happened to the non-current thread. If | |
| so, then switch to that thread. */ | |
| if (!ptid_equal (ecs->ptid, inferior_ptid)) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n"); | |
| context_switch (ecs->ptid); | |
| if (deprecated_context_hook) | |
| deprecated_context_hook (pid_to_thread_id (ecs->ptid)); | |
| } | |
| if (singlestep_breakpoints_inserted_p) | |
| { | |
| /* Pull the single step breakpoints out of the target. */ | |
| remove_single_step_breakpoints (); | |
| singlestep_breakpoints_inserted_p = 0; | |
| } | |
| if (stepped_after_stopped_by_watchpoint) | |
| stopped_by_watchpoint = 0; | |
| else | |
| stopped_by_watchpoint = watchpoints_triggered (&ecs->ws); | |
| /* If necessary, step over this watchpoint. We'll be back to display | |
| it in a moment. */ | |
| if (stopped_by_watchpoint | |
| && (HAVE_STEPPABLE_WATCHPOINT | |
| || gdbarch_have_nonsteppable_watchpoint (current_gdbarch))) | |
| { | |
| /* At this point, we are stopped at an instruction which has | |
| attempted to write to a piece of memory under control of | |
| a watchpoint. The instruction hasn't actually executed | |
| yet. If we were to evaluate the watchpoint expression | |
| now, we would get the old value, and therefore no change | |
| would seem to have occurred. | |
| In order to make watchpoints work `right', we really need | |
| to complete the memory write, and then evaluate the | |
| watchpoint expression. We do this by single-stepping the | |
| target. | |
| It may not be necessary to disable the watchpoint to stop over | |
| it. For example, the PA can (with some kernel cooperation) | |
| single step over a watchpoint without disabling the watchpoint. | |
| It is far more common to need to disable a watchpoint to step | |
| the inferior over it. If we have non-steppable watchpoints, | |
| we must disable the current watchpoint; it's simplest to | |
| disable all watchpoints and breakpoints. */ | |
| if (!HAVE_STEPPABLE_WATCHPOINT) | |
| remove_breakpoints (); | |
| registers_changed (); | |
| target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */ | |
| waiton_ptid = ecs->ptid; | |
| if (HAVE_STEPPABLE_WATCHPOINT) | |
| infwait_state = infwait_step_watch_state; | |
| else | |
| infwait_state = infwait_nonstep_watch_state; | |
| prepare_to_wait (ecs); | |
| return; | |
| } | |
| ecs->stop_func_start = 0; | |
| ecs->stop_func_end = 0; | |
| ecs->stop_func_name = 0; | |
| /* Don't care about return value; stop_func_start and stop_func_name | |
| will both be 0 if it doesn't work. */ | |
| find_pc_partial_function (stop_pc, &ecs->stop_func_name, | |
| &ecs->stop_func_start, &ecs->stop_func_end); | |
| ecs->stop_func_start | |
| += gdbarch_deprecated_function_start_offset (current_gdbarch); | |
| tss->stepping_over_breakpoint = 0; | |
| bpstat_clear (&stop_bpstat); | |
| stop_step = 0; | |
| stop_print_frame = 1; | |
| ecs->random_signal = 0; | |
| stopped_by_random_signal = 0; | |
| if (stop_signal == TARGET_SIGNAL_TRAP | |
| && stepping_over_breakpoint | |
| && gdbarch_single_step_through_delay_p (current_gdbarch) | |
| && currently_stepping (tss)) | |
| { | |
| /* We're trying to step off a breakpoint. Turns out that we're | |
| also on an instruction that needs to be stepped multiple | |
| times before it's been fully executing. E.g., architectures | |
| with a delay slot. It needs to be stepped twice, once for | |
| the instruction and once for the delay slot. */ | |
| int step_through_delay | |
| = gdbarch_single_step_through_delay (current_gdbarch, | |
| get_current_frame ()); | |
| if (debug_infrun && step_through_delay) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n"); | |
| if (step_range_end == 0 && step_through_delay) | |
| { | |
| /* The user issued a continue when stopped at a breakpoint. | |
| Set up for another trap and get out of here. */ | |
| tss->stepping_over_breakpoint = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| else if (step_through_delay) | |
| { | |
| /* The user issued a step when stopped at a breakpoint. | |
| Maybe we should stop, maybe we should not - the delay | |
| slot *might* correspond to a line of source. In any | |
| case, don't decide that here, just set | |
| ecs->stepping_over_breakpoint, making sure we | |
| single-step again before breakpoints are re-inserted. */ | |
| tss->stepping_over_breakpoint = 1; | |
| } | |
| } | |
| /* Look at the cause of the stop, and decide what to do. | |
| The alternatives are: | |
| 1) stop_stepping and return; to really stop and return to the debugger, | |
| 2) keep_going and return to start up again | |
| (set tss->stepping_over_breakpoint to 1 to single step once) | |
| 3) set ecs->random_signal to 1, and the decision between 1 and 2 | |
| will be made according to the signal handling tables. */ | |
| /* First, distinguish signals caused by the debugger from signals | |
| that have to do with the program's own actions. Note that | |
| breakpoint insns may cause SIGTRAP or SIGILL or SIGEMT, depending | |
| on the operating system version. Here we detect when a SIGILL or | |
| SIGEMT is really a breakpoint and change it to SIGTRAP. We do | |
| something similar for SIGSEGV, since a SIGSEGV will be generated | |
| when we're trying to execute a breakpoint instruction on a | |
| non-executable stack. This happens for call dummy breakpoints | |
| for architectures like SPARC that place call dummies on the | |
| stack. | |
| If we're doing a displaced step past a breakpoint, then the | |
| breakpoint is always inserted at the original instruction; | |
| non-standard signals can't be explained by the breakpoint. */ | |
| if (stop_signal == TARGET_SIGNAL_TRAP | |
| || (! stepping_over_breakpoint | |
| && breakpoint_inserted_here_p (stop_pc) | |
| && (stop_signal == TARGET_SIGNAL_ILL | |
| || stop_signal == TARGET_SIGNAL_SEGV | |
| || stop_signal == TARGET_SIGNAL_EMT)) | |
| || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP | |
| || stop_soon == STOP_QUIETLY_REMOTE) | |
| { | |
| if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n"); | |
| stop_print_frame = 0; | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| /* This is originated from start_remote(), start_inferior() and | |
| shared libraries hook functions. */ | |
| if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n"); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| /* This originates from attach_command(). We need to overwrite | |
| the stop_signal here, because some kernels don't ignore a | |
| SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call. | |
| See more comments in inferior.h. On the other hand, if we | |
| get a non-SIGSTOP, report it to the user - assume the backend | |
| will handle the SIGSTOP if it should show up later. | |
| Also consider that the attach is complete when we see a | |
| SIGTRAP. Some systems (e.g. Windows), and stubs supporting | |
| target extended-remote report it instead of a SIGSTOP | |
| (e.g. gdbserver). We already rely on SIGTRAP being our | |
| signal, so this is no exception. */ | |
| if (stop_soon == STOP_QUIETLY_NO_SIGSTOP | |
| && (stop_signal == TARGET_SIGNAL_STOP | |
| || stop_signal == TARGET_SIGNAL_TRAP)) | |
| { | |
| stop_stepping (ecs); | |
| stop_signal = TARGET_SIGNAL_0; | |
| return; | |
| } | |
| /* See if there is a breakpoint at the current PC. */ | |
| stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid); | |
| /* Following in case break condition called a | |
| function. */ | |
| stop_print_frame = 1; | |
| /* NOTE: cagney/2003-03-29: These two checks for a random signal | |
| at one stage in the past included checks for an inferior | |
| function call's call dummy's return breakpoint. The original | |
| comment, that went with the test, read: | |
| ``End of a stack dummy. Some systems (e.g. Sony news) give | |
| another signal besides SIGTRAP, so check here as well as | |
| above.'' | |
| If someone ever tries to get call dummys on a | |
| non-executable stack to work (where the target would stop | |
| with something like a SIGSEGV), then those tests might need | |
| to be re-instated. Given, however, that the tests were only | |
| enabled when momentary breakpoints were not being used, I | |
| suspect that it won't be the case. | |
| NOTE: kettenis/2004-02-05: Indeed such checks don't seem to | |
| be necessary for call dummies on a non-executable stack on | |
| SPARC. */ | |
| /* When execution direction is reverse or process record target is used, | |
| maybe GDB will set next resume to step. Then the next step will be | |
| set to random signal. It will make GDB stop the inferior. So | |
| When execution direction is reverse or record target is used, not set | |
| the random signal. */ | |
| if (stop_signal == TARGET_SIGNAL_TRAP) | |
| ecs->random_signal | |
| = !(bpstat_explains_signal (stop_bpstat) | |
| || stepping_over_breakpoint | |
| || (step_range_end && step_resume_breakpoint == NULL) | |
| || (execution_direction == EXEC_REVERSE) | |
| || RECORD_IS_USED); | |
| else | |
| { | |
| ecs->random_signal = !bpstat_explains_signal (stop_bpstat); | |
| if (!ecs->random_signal) | |
| stop_signal = TARGET_SIGNAL_TRAP; | |
| } | |
| } | |
| /* When we reach this point, we've pretty much decided | |
| that the reason for stopping must've been a random | |
| (unexpected) signal. */ | |
| else | |
| ecs->random_signal = 1; | |
| process_event_stop_test: | |
| /* For the program's own signals, act according to | |
| the signal handling tables. */ | |
| if (ecs->random_signal) | |
| { | |
| /* Signal not for debugging purposes. */ | |
| int printed = 0; | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal); | |
| stopped_by_random_signal = 1; | |
| if (signal_print[stop_signal]) | |
| { | |
| printed = 1; | |
| target_terminal_ours_for_output (); | |
| print_stop_reason (SIGNAL_RECEIVED, stop_signal); | |
| } | |
| if (signal_stop_state (stop_signal)) | |
| { | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| /* If not going to stop, give terminal back | |
| if we took it away. */ | |
| else if (printed) | |
| target_terminal_inferior (); | |
| /* Clear the signal if it should not be passed. */ | |
| if (signal_program[stop_signal] == 0) | |
| stop_signal = TARGET_SIGNAL_0; | |
| if (prev_pc == read_pc () | |
| && stepping_over_breakpoint | |
| && step_resume_breakpoint == NULL) | |
| { | |
| /* We were just starting a new sequence, attempting to | |
| single-step off of a breakpoint and expecting a SIGTRAP. | |
| Instead this signal arrives. This signal will take us out | |
| of the stepping range so GDB needs to remember to, when | |
| the signal handler returns, resume stepping off that | |
| breakpoint. */ | |
| /* To simplify things, "continue" is forced to use the same | |
| code paths as single-step - set a breakpoint at the | |
| signal return address and then, once hit, step off that | |
| breakpoint. */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: signal arrived while stepping over " | |
| "breakpoint\n"); | |
| insert_step_resume_breakpoint_at_frame (get_current_frame ()); | |
| tss->step_after_step_resume_breakpoint = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| if (step_range_end != 0 | |
| && stop_signal != TARGET_SIGNAL_0 | |
| && stop_pc >= step_range_start && stop_pc < step_range_end | |
| && frame_id_eq (get_frame_id (get_current_frame ()), | |
| step_frame_id) | |
| && step_resume_breakpoint == NULL) | |
| { | |
| /* The inferior is about to take a signal that will take it | |
| out of the single step range. Set a breakpoint at the | |
| current PC (which is presumably where the signal handler | |
| will eventually return) and then allow the inferior to | |
| run free. | |
| Note that this is only needed for a signal delivered | |
| while in the single-step range. Nested signals aren't a | |
| problem as they eventually all return. */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: signal may take us out of " | |
| "single-step range\n"); | |
| insert_step_resume_breakpoint_at_frame (get_current_frame ()); | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* Note: step_resume_breakpoint may be non-NULL. This occures | |
| when either there's a nested signal, or when there's a | |
| pending signal enabled just as the signal handler returns | |
| (leaving the inferior at the step-resume-breakpoint without | |
| actually executing it). Either way continue until the | |
| breakpoint is really hit. */ | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* Handle cases caused by hitting a breakpoint. */ | |
| { | |
| CORE_ADDR jmp_buf_pc; | |
| struct bpstat_what what; | |
| what = bpstat_what (stop_bpstat); | |
| if (what.call_dummy) | |
| { | |
| stop_stack_dummy = 1; | |
| } | |
| switch (what.main_action) | |
| { | |
| case BPSTAT_WHAT_SET_LONGJMP_RESUME: | |
| /* If we hit the breakpoint at longjmp while stepping, we | |
| install a momentary breakpoint at the target of the | |
| jmp_buf. */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n"); | |
| tss->stepping_over_breakpoint = 1; | |
| if (!gdbarch_get_longjmp_target_p (current_gdbarch) | |
| || !gdbarch_get_longjmp_target (current_gdbarch, | |
| get_current_frame (), &jmp_buf_pc)) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "\ | |
| infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target)\n"); | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* We're going to replace the current step-resume breakpoint | |
| with a longjmp-resume breakpoint. */ | |
| if (step_resume_breakpoint != NULL) | |
| delete_step_resume_breakpoint (&step_resume_breakpoint); | |
| /* Insert a breakpoint at resume address. */ | |
| insert_longjmp_resume_breakpoint (jmp_buf_pc); | |
| keep_going (ecs); | |
| return; | |
| case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n"); | |
| gdb_assert (step_resume_breakpoint != NULL); | |
| delete_step_resume_breakpoint (&step_resume_breakpoint); | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| case BPSTAT_WHAT_SINGLE: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n"); | |
| tss->stepping_over_breakpoint = 1; | |
| /* Still need to check other stuff, at least the case | |
| where we are stepping and step out of the right range. */ | |
| break; | |
| case BPSTAT_WHAT_STOP_NOISY: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n"); | |
| stop_print_frame = 1; | |
| /* We are about to nuke the step_resume_breakpointt via the | |
| cleanup chain, so no need to worry about it here. */ | |
| stop_stepping (ecs); | |
| return; | |
| case BPSTAT_WHAT_STOP_SILENT: | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n"); | |
| stop_print_frame = 0; | |
| /* We are about to nuke the step_resume_breakpoin via the | |
| cleanup chain, so no need to worry about it here. */ | |
| stop_stepping (ecs); | |
| return; | |
| case BPSTAT_WHAT_STEP_RESUME: | |
| /* This proably demands a more elegant solution, but, yeah | |
| right... | |
| This function's use of the simple variable | |
| step_resume_breakpoint doesn't seem to accomodate | |
| simultaneously active step-resume bp's, although the | |
| breakpoint list certainly can. | |
| If we reach here and step_resume_breakpoint is already | |
| NULL, then apparently we have multiple active | |
| step-resume bp's. We'll just delete the breakpoint we | |
| stopped at, and carry on. | |
| Correction: what the code currently does is delete a | |
| step-resume bp, but it makes no effort to ensure that | |
| the one deleted is the one currently stopped at. MVS */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n"); | |
| if (step_resume_breakpoint == NULL) | |
| { | |
| step_resume_breakpoint = | |
| bpstat_find_step_resume_breakpoint (stop_bpstat); | |
| } | |
| delete_step_resume_breakpoint (&step_resume_breakpoint); | |
| if (tss->step_after_step_resume_breakpoint) | |
| { | |
| /* Back when the step-resume breakpoint was inserted, we | |
| were trying to single-step off a breakpoint. Go back | |
| to doing that. */ | |
| tss->step_after_step_resume_breakpoint = 0; | |
| tss->stepping_over_breakpoint = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| if (stop_pc == ecs->stop_func_start | |
| && execution_direction == EXEC_REVERSE) | |
| { | |
| /* We are stepping over a function call in reverse, and | |
| just hit the step-resume breakpoint at the start | |
| address of the function. Go back to single-stepping, | |
| which should take us back to the function call. */ | |
| tss->stepping_over_breakpoint = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| break; | |
| case BPSTAT_WHAT_CHECK_SHLIBS: | |
| case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK: | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n"); | |
| /* Check for any newly added shared libraries if we're | |
| supposed to be adding them automatically. Switch | |
| terminal for any messages produced by | |
| breakpoint_re_set. */ | |
| target_terminal_ours_for_output (); | |
| /* NOTE: cagney/2003-11-25: Make certain that the target | |
| stack's section table is kept up-to-date. Architectures, | |
| (e.g., PPC64), use the section table to perform | |
| operations such as address => section name and hence | |
| require the table to contain all sections (including | |
| those found in shared libraries). */ | |
| /* NOTE: cagney/2003-11-25: Pass current_target and not | |
| exec_ops to SOLIB_ADD. This is because current GDB is | |
| only tooled to propagate section_table changes out from | |
| the "current_target" (see target_resize_to_sections), and | |
| not up from the exec stratum. This, of course, isn't | |
| right. "infrun.c" should only interact with the | |
| exec/process stratum, instead relying on the target stack | |
| to propagate relevant changes (stop, section table | |
| changed, ...) up to other layers. */ | |
| #ifdef SOLIB_ADD | |
| SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add); | |
| #else | |
| solib_add (NULL, 0, ¤t_target, auto_solib_add); | |
| #endif | |
| target_terminal_inferior (); | |
| /* If requested, stop when the dynamic linker notifies | |
| gdb of events. This allows the user to get control | |
| and place breakpoints in initializer routines for | |
| dynamically loaded objects (among other things). */ | |
| if (stop_on_solib_events || stop_stack_dummy) | |
| { | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| /* If we stopped due to an explicit catchpoint, then the | |
| (see above) call to SOLIB_ADD pulled in any symbols | |
| from a newly-loaded library, if appropriate. | |
| We do want the inferior to stop, but not where it is | |
| now, which is in the dynamic linker callback. Rather, | |
| we would like it stop in the user's program, just after | |
| the call that caused this catchpoint to trigger. That | |
| gives the user a more useful vantage from which to | |
| examine their program's state. */ | |
| else if (what.main_action | |
| == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK) | |
| { | |
| /* ??rehrauer: If I could figure out how to get the | |
| right return PC from here, we could just set a temp | |
| breakpoint and resume. I'm not sure we can without | |
| cracking open the dld's shared libraries and sniffing | |
| their unwind tables and text/data ranges, and that's | |
| not a terribly portable notion. | |
| Until that time, we must step the inferior out of the | |
| dld callback, and also out of the dld itself (and any | |
| code or stubs in libdld.sl, such as "shl_load" and | |
| friends) until we reach non-dld code. At that point, | |
| we can stop stepping. */ | |
| bpstat_get_triggered_catchpoints (stop_bpstat, | |
| &tss-> | |
| stepping_through_solib_catchpoints); | |
| tss->stepping_through_solib_after_catch = 1; | |
| /* Be sure to lift all breakpoints, so the inferior does | |
| actually step past this point... */ | |
| tss->stepping_over_breakpoint = 1; | |
| break; | |
| } | |
| else | |
| { | |
| /* We want to step over this breakpoint, then keep going. */ | |
| tss->stepping_over_breakpoint = 1; | |
| break; | |
| } | |
| } | |
| break; | |
| case BPSTAT_WHAT_LAST: | |
| /* Not a real code, but listed here to shut up gcc -Wall. */ | |
| case BPSTAT_WHAT_KEEP_CHECKING: | |
| break; | |
| } | |
| } | |
| /* We come here if we hit a breakpoint but should not | |
| stop for it. Possibly we also were stepping | |
| and should stop for that. So fall through and | |
| test for stepping. But, if not stepping, | |
| do not stop. */ | |
| /* Are we stepping to get the inferior out of the dynamic linker's | |
| hook (and possibly the dld itself) after catching a shlib | |
| event? */ | |
| if (tss->stepping_through_solib_after_catch) | |
| { | |
| #if defined(SOLIB_ADD) | |
| /* Have we reached our destination? If not, keep going. */ | |
| if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc)) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n"); | |
| tss->stepping_over_breakpoint = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| #endif | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n"); | |
| /* Else, stop and report the catchpoint(s) whose triggering | |
| caused us to begin stepping. */ | |
| tss->stepping_through_solib_after_catch = 0; | |
| bpstat_clear (&stop_bpstat); | |
| stop_bpstat = bpstat_copy (tss->stepping_through_solib_catchpoints); | |
| bpstat_clear (&tss->stepping_through_solib_catchpoints); | |
| stop_print_frame = 1; | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| if (step_resume_breakpoint) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: step-resume breakpoint is inserted\n"); | |
| /* Having a step-resume breakpoint overrides anything | |
| else having to do with stepping commands until | |
| that breakpoint is reached. */ | |
| keep_going (ecs); | |
| return; | |
| } | |
| if (step_range_end == 0) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n"); | |
| /* Likewise if we aren't even stepping. */ | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* If stepping through a line, keep going if still within it. | |
| Note that step_range_end is the address of the first instruction | |
| beyond the step range, and NOT the address of the last instruction | |
| within it! */ | |
| if (stop_pc >= step_range_start && stop_pc < step_range_end) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n", | |
| paddr_nz (step_range_start), | |
| paddr_nz (step_range_end)); | |
| /* When stepping backward, stop at beginning of line range | |
| (unless it's the function entry point, in which case | |
| keep going back to the call point). */ | |
| if (stop_pc == step_range_start | |
| && stop_pc != ecs->stop_func_start | |
| && execution_direction == EXEC_REVERSE) | |
| { | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| } | |
| else | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* We stepped out of the stepping range. */ | |
| /* If we are stepping at the source level and entered the runtime | |
| loader dynamic symbol resolution code, we keep on single stepping | |
| until we exit the run time loader code and reach the callee's | |
| address. */ | |
| if (step_over_calls == STEP_OVER_UNDEBUGGABLE | |
| #ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE | |
| && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc) | |
| #else | |
| && in_solib_dynsym_resolve_code (stop_pc) | |
| #endif | |
| ) | |
| { | |
| CORE_ADDR pc_after_resolver = | |
| gdbarch_skip_solib_resolver (current_gdbarch, stop_pc); | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n"); | |
| if (pc_after_resolver) | |
| { | |
| /* Set up a step-resume breakpoint at the address | |
| indicated by SKIP_SOLIB_RESOLVER. */ | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); | |
| sr_sal.pc = pc_after_resolver; | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| } | |
| keep_going (ecs); | |
| return; | |
| } | |
| if (step_range_end != 1 | |
| && (step_over_calls == STEP_OVER_UNDEBUGGABLE | |
| || step_over_calls == STEP_OVER_ALL) | |
| && get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n"); | |
| /* The inferior, while doing a "step" or "next", has ended up in | |
| a signal trampoline (either by a signal being delivered or by | |
| the signal handler returning). Just single-step until the | |
| inferior leaves the trampoline (either by calling the handler | |
| or returning). */ | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* Check for subroutine calls. The check for the current frame | |
| equalling the step ID is not necessary - the check of the | |
| previous frame's ID is sufficient - but it is a common case and | |
| cheaper than checking the previous frame's ID. | |
| NOTE: frame_id_eq will never report two invalid frame IDs as | |
| being equal, so to get into this block, both the current and | |
| previous frame must have valid frame IDs. */ | |
| if (!frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id) | |
| && frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id)) | |
| { | |
| CORE_ADDR real_stop_pc; | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n"); | |
| if ((step_over_calls == STEP_OVER_NONE) | |
| || ((step_range_end == 1) | |
| && in_prologue (prev_pc, ecs->stop_func_start))) | |
| { | |
| /* I presume that step_over_calls is only 0 when we're | |
| supposed to be stepping at the assembly language level | |
| ("stepi"). Just stop. */ | |
| /* Also, maybe we just did a "nexti" inside a prolog, so we | |
| thought it was a subroutine call but it was not. Stop as | |
| well. FENN */ | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| if (step_over_calls == STEP_OVER_ALL) | |
| { | |
| /* We're doing a "next". | |
| Normal (forward) execution: set a breakpoint at the | |
| callee's return address (the address at which the caller | |
| will resume). | |
| Reverse (backward) execution. set the step-resume | |
| breakpoint at the start of the function that we just | |
| stepped into (backwards), and continue to there. When we | |
| get there, we'll need to single-step back to the | |
| caller. */ | |
| if (execution_direction == EXEC_REVERSE) | |
| { | |
| if (ecs->stop_func_start == 0) | |
| { | |
| reverse_resume_need_step = 1; | |
| } | |
| else | |
| { | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); | |
| sr_sal.pc = ecs->stop_func_start; | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| } | |
| } | |
| /* If process record target is recording and real running target | |
| doesn't support record wait, Record target need execute single | |
| instruction for each step to call funtion "record_message" for | |
| each instruction. So set "reverse_resume_need_step" to execute | |
| single step. */ | |
| else if (RECORD_IS_USED && !RECORD_IS_REPLAY | |
| && !RECORD_TARGET_SUPPORT_RECORD_WAIT) | |
| { | |
| reverse_resume_need_step = 1; | |
| } | |
| else | |
| insert_step_resume_breakpoint_at_caller (get_current_frame ()); | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* If we are in a function call trampoline (a stub between the | |
| calling routine and the real function), locate the real | |
| function. That's what tells us (a) whether we want to step | |
| into it at all, and (b) what prologue we want to run to the | |
| end of, if we do step into it. */ | |
| real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc); | |
| if (real_stop_pc == 0) | |
| real_stop_pc = gdbarch_skip_trampoline_code | |
| (current_gdbarch, get_current_frame (), stop_pc); | |
| if (real_stop_pc != 0) | |
| ecs->stop_func_start = real_stop_pc; | |
| if ( | |
| #ifdef IN_SOLIB_DYNSYM_RESOLVE_CODE | |
| IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start) | |
| #else | |
| in_solib_dynsym_resolve_code (ecs->stop_func_start) | |
| #endif | |
| ) | |
| { | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); | |
| sr_sal.pc = ecs->stop_func_start; | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* If we have line number information for the function we are | |
| thinking of stepping into, step into it. | |
| If there are several symtabs at that PC (e.g. with include | |
| files), just want to know whether *any* of them have line | |
| numbers. find_pc_line handles this. */ | |
| { | |
| struct symtab_and_line tmp_sal; | |
| tmp_sal = find_pc_line (ecs->stop_func_start, 0); | |
| if (tmp_sal.line != 0) | |
| { | |
| if (execution_direction == EXEC_REVERSE) | |
| handle_step_into_function_backward (ecs); | |
| else | |
| handle_step_into_function (ecs); | |
| return; | |
| } | |
| } | |
| /* If we have no line number and the step-stop-if-no-debug is | |
| set, we stop the step so that the user has a chance to switch | |
| in assembly mode. */ | |
| if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug) | |
| { | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| if (execution_direction == EXEC_REVERSE) | |
| { | |
| /* Set a breakpoint at callee's start address. | |
| From there we can step once and be back in the caller. */ | |
| /* FIXME: I'm not sure we've handled the frame for recursion. */ | |
| if (ecs->stop_func_start == 0) | |
| { | |
| reverse_resume_need_step = 1; | |
| } | |
| else | |
| { | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); | |
| sr_sal.pc = ecs->stop_func_start; | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| } | |
| } | |
| /* If process record target is recording and real running target doesn't | |
| support record wait, process record target need execute single | |
| instruction for each step to call funtion "record_message" for each | |
| instruction. So set "reverse_resume_need_step" to execute single | |
| step. */ | |
| else if (RECORD_IS_USED && !RECORD_IS_REPLAY | |
| && !RECORD_TARGET_SUPPORT_RECORD_WAIT) | |
| reverse_resume_need_step = 1; | |
| else | |
| /* Set a breakpoint at callee's return address (the address | |
| at which the caller will resume). */ | |
| insert_step_resume_breakpoint_at_caller (get_current_frame ()); | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* If we're in the return path from a shared library trampoline, | |
| we want to proceed through the trampoline when stepping. */ | |
| if (gdbarch_in_solib_return_trampoline (current_gdbarch, | |
| stop_pc, ecs->stop_func_name)) | |
| { | |
| /* Determine where this trampoline returns. */ | |
| CORE_ADDR real_stop_pc; | |
| real_stop_pc = gdbarch_skip_trampoline_code | |
| (current_gdbarch, get_current_frame (), stop_pc); | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n"); | |
| /* Only proceed through if we know where it's going. */ | |
| if (real_stop_pc) | |
| { | |
| /* And put the step-breakpoint there and go until there. */ | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); /* initialize to zeroes */ | |
| sr_sal.pc = real_stop_pc; | |
| sr_sal.section = find_pc_overlay (sr_sal.pc); | |
| /* Do not specify what the fp should be when we stop since | |
| on some machines the prologue is where the new fp value | |
| is established. */ | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| /* Restart without fiddling with the step ranges or | |
| other state. */ | |
| keep_going (ecs); | |
| return; | |
| } | |
| } | |
| stop_pc_sal = find_pc_line (stop_pc, 0); | |
| /* NOTE: tausq/2004-05-24: This if block used to be done before all | |
| the trampoline processing logic, however, there are some trampolines | |
| that have no names, so we should do trampoline handling first. */ | |
| if (step_over_calls == STEP_OVER_UNDEBUGGABLE | |
| && ecs->stop_func_name == NULL | |
| && stop_pc_sal.line == 0) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n"); | |
| /* If process record target is recording and real running target doesn't | |
| support record wait, process record target need execute single | |
| instruction for each step to call funtion "record_message" for each | |
| instruction. So set "reverse_resume_need_step" to execute single | |
| step. */ | |
| if (RECORD_IS_USED && !RECORD_IS_REPLAY | |
| && !RECORD_TARGET_SUPPORT_RECORD_WAIT) | |
| { | |
| reverse_resume_need_step = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* The inferior just stepped into, or returned to, an | |
| undebuggable function (where there is no debugging information | |
| and no line number corresponding to the address where the | |
| inferior stopped). Since we want to skip this kind of code, | |
| we keep going until the inferior returns from this | |
| function - unless the user has asked us not to (via | |
| set step-mode) or we no longer know how to get back | |
| to the call site. */ | |
| if (step_stop_if_no_debug | |
| || !frame_id_p (frame_unwind_id (get_current_frame ()))) | |
| { | |
| /* If we have no line number and the step-stop-if-no-debug | |
| is set, we stop the step so that the user has a chance to | |
| switch in assembly mode. */ | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| else | |
| { | |
| /* Set a breakpoint at callee's return address (the address | |
| at which the caller will resume). */ | |
| insert_step_resume_breakpoint_at_caller (get_current_frame ()); | |
| keep_going (ecs); | |
| return; | |
| } | |
| } | |
| if (step_range_end == 1) | |
| { | |
| /* It is stepi or nexti. We always want to stop stepping after | |
| one instruction. */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n"); | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| if (stop_pc_sal.line == 0) | |
| { | |
| /* We have no line number information. That means to stop | |
| stepping (does this always happen right after one instruction, | |
| when we do "s" in a function with no line numbers, | |
| or can this happen as a result of a return or longjmp?). */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n"); | |
| if (execution_direction == EXEC_REVERSE) | |
| { | |
| /* Set a breakpoint at callee's start address. | |
| From there we can step once and be back in the caller. */ | |
| /* FIXME: I'm not sure we've handled the frame for recursion. */ | |
| if (ecs->stop_func_start == 0) | |
| { | |
| reverse_resume_need_step = 1; | |
| } | |
| else | |
| { | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); | |
| sr_sal.pc = ecs->stop_func_start; | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| } | |
| keep_going (ecs); | |
| return; | |
| } | |
| /* If process record target is recording and real running target doesn't | |
| support record wait, process record target need execute single | |
| instruction for each step to call funtion "record_message" for each | |
| instruction. So set "reverse_resume_need_step" to execute single | |
| step. */ | |
| if (RECORD_IS_USED && !RECORD_IS_REPLAY | |
| && !RECORD_TARGET_SUPPORT_RECORD_WAIT) | |
| { | |
| reverse_resume_need_step = 1; | |
| keep_going (ecs); | |
| return; | |
| } | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| if (execution_direction == EXEC_REVERSE | |
| && frame_id_eq (get_frame_id (get_current_frame ()), | |
| step_prev_frame_id)) | |
| { | |
| if (debug_infrun) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: return to the prev function\n"); | |
| } | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| if (!frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id) | |
| && (execution_direction == EXEC_REVERSE | |
| || RECORD_IS_USED)) | |
| { | |
| if (stop_pc != stop_pc_sal.pc | |
| && execution_direction == EXEC_REVERSE | |
| && step_over_calls == STEP_OVER_ALL) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: maybe stepped into subroutine\n"); | |
| if (ecs->stop_func_start == 0) | |
| { | |
| reverse_resume_need_step = 1; | |
| } | |
| else | |
| { | |
| struct symtab_and_line sr_sal; | |
| init_sal (&sr_sal); | |
| sr_sal.pc = ecs->stop_func_start; | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| } | |
| keep_going (ecs); | |
| return; | |
| } | |
| } | |
| #if 0 | |
| if (((stop_pc == stop_pc_sal.pc | |
| && execution_direction != EXEC_REVERSE) | |
| || (stop_pc >= stop_pc_sal.pc && stop_pc < stop_pc_sal.end | |
| && execution_direction == EXEC_REVERSE)) | |
| && (tss->current_line != stop_pc_sal.line | |
| || tss->current_symtab != stop_pc_sal.symtab)) | |
| { | |
| /* We are at the start of a different line. So stop. Note that | |
| we don't stop if we step into the middle of a different line. | |
| That is said to make things like for (;;) statements work | |
| better. */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n"); | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| #else | |
| if ((stop_pc == stop_pc_sal.pc) | |
| && (tss->current_line != stop_pc_sal.line | |
| || tss->current_symtab != stop_pc_sal.symtab)) | |
| { | |
| /* We are at the start of a different line. So stop. Note that | |
| we don't stop if we step into the middle of a different line. | |
| That is said to make things like for (;;) statements work | |
| better. */ | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n"); | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| #endif | |
| /* We aren't done stepping. | |
| Optimize by setting the stepping range to the line. | |
| (We might not be in the original line, but if we entered a | |
| new line in mid-statement, we continue stepping. This makes | |
| things like for(;;) statements work better.) */ | |
| step_range_start = stop_pc_sal.pc; | |
| step_range_end = stop_pc_sal.end; | |
| step_frame_id = get_frame_id (get_current_frame ()); | |
| tss->current_line = stop_pc_sal.line; | |
| tss->current_symtab = stop_pc_sal.symtab; | |
| /* In the case where we just stepped out of a function into the | |
| middle of a line of the caller, continue stepping, but | |
| step_frame_id must be modified to current frame */ | |
| #if 0 | |
| /* NOTE: cagney/2003-10-16: I think this frame ID inner test is too | |
| generous. It will trigger on things like a step into a frameless | |
| stackless leaf function. I think the logic should instead look | |
| at the unwound frame ID has that should give a more robust | |
| indication of what happened. */ | |
| if (step - ID == current - ID) | |
| still stepping in same function; | |
| else if (step - ID == unwind (current - ID)) | |
| stepped into a function; | |
| else | |
| stepped out of a function; | |
| /* Of course this assumes that the frame ID unwind code is robust | |
| and we're willing to introduce frame unwind logic into this | |
| function. Fortunately, those days are nearly upon us. */ | |
| #endif | |
| { | |
| struct frame_info *frame = get_current_frame (); | |
| struct frame_id current_frame = get_frame_id (frame); | |
| if (!(frame_id_inner (get_frame_arch (frame), current_frame, | |
| step_frame_id))) | |
| step_frame_id = current_frame; | |
| } | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n"); | |
| keep_going (ecs); | |
| } | |
| /* Are we in the middle of stepping? */ | |
| static int | |
| currently_stepping (struct thread_stepping_state *tss) | |
| { | |
| return (((step_range_end && step_resume_breakpoint == NULL) | |
| || stepping_over_breakpoint) | |
| || tss->stepping_through_solib_after_catch | |
| || bpstat_should_step () | |
| || reverse_resume_need_step); | |
| } | |
| /* Inferior has stepped into a subroutine call with source code that | |
| we should not step over. Do step to the first line of code in | |
| it. */ | |
| static void | |
| handle_step_into_function (struct execution_control_state *ecs) | |
| { | |
| struct symtab *s; | |
| struct symtab_and_line stop_func_sal, sr_sal; | |
| s = find_pc_symtab (stop_pc); | |
| if (s && s->language != language_asm) | |
| ecs->stop_func_start = gdbarch_skip_prologue (current_gdbarch, | |
| ecs->stop_func_start); | |
| stop_func_sal = find_pc_line (ecs->stop_func_start, 0); | |
| /* Use the step_resume_break to step until the end of the prologue, | |
| even if that involves jumps (as it seems to on the vax under | |
| 4.2). */ | |
| /* If the prologue ends in the middle of a source line, continue to | |
| the end of that source line (if it is still within the function). | |
| Otherwise, just go to end of prologue. */ | |
| if (stop_func_sal.end | |
| && stop_func_sal.pc != ecs->stop_func_start | |
| && stop_func_sal.end < ecs->stop_func_end) | |
| ecs->stop_func_start = stop_func_sal.end; | |
| /* Architectures which require breakpoint adjustment might not be able | |
| to place a breakpoint at the computed address. If so, the test | |
| ``ecs->stop_func_start == stop_pc'' will never succeed. Adjust | |
| ecs->stop_func_start to an address at which a breakpoint may be | |
| legitimately placed. | |
| Note: kevinb/2004-01-19: On FR-V, if this adjustment is not | |
| made, GDB will enter an infinite loop when stepping through | |
| optimized code consisting of VLIW instructions which contain | |
| subinstructions corresponding to different source lines. On | |
| FR-V, it's not permitted to place a breakpoint on any but the | |
| first subinstruction of a VLIW instruction. When a breakpoint is | |
| set, GDB will adjust the breakpoint address to the beginning of | |
| the VLIW instruction. Thus, we need to make the corresponding | |
| adjustment here when computing the stop address. */ | |
| if (gdbarch_adjust_breakpoint_address_p (current_gdbarch)) | |
| { | |
| ecs->stop_func_start | |
| = gdbarch_adjust_breakpoint_address (current_gdbarch, | |
| ecs->stop_func_start); | |
| } | |
| if (ecs->stop_func_start == stop_pc) | |
| { | |
| /* We are already there: stop now. */ | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| else | |
| { | |
| /* Put the step-breakpoint there and go until there. */ | |
| init_sal (&sr_sal); /* initialize to zeroes */ | |
| sr_sal.pc = ecs->stop_func_start; | |
| sr_sal.section = find_pc_overlay (ecs->stop_func_start); | |
| /* Do not specify what the fp should be when we stop since on | |
| some machines the prologue is where the new fp value is | |
| established. */ | |
| insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id); | |
| /* And make sure stepping stops right away then. */ | |
| step_range_end = step_range_start; | |
| } | |
| keep_going (ecs); | |
| } | |
| /* Inferior has stepped backward into a subroutine call with source | |
| code that we should not step over. Do step to the beginning of the | |
| last line of code in it. */ | |
| static void | |
| handle_step_into_function_backward (struct execution_control_state *ecs) | |
| { | |
| struct symtab *s; | |
| struct symtab_and_line stop_func_sal, sr_sal; | |
| s = find_pc_symtab (stop_pc); | |
| if (s && s->language != language_asm) | |
| ecs->stop_func_start = gdbarch_skip_prologue (current_gdbarch, | |
| ecs->stop_func_start); | |
| stop_func_sal = find_pc_line (stop_pc, 0); | |
| /* OK, we're just going to keep stepping here. */ | |
| if (stop_func_sal.pc == stop_pc) | |
| { | |
| /* We're there already. Just stop stepping now. */ | |
| stop_step = 1; | |
| print_stop_reason (END_STEPPING_RANGE, 0); | |
| stop_stepping (ecs); | |
| } | |
| else | |
| { | |
| /* Else just reset the step range and keep going. | |
| No step-resume breakpoint, they don't work for | |
| epilogues, which can have multiple entry paths. */ | |
| step_range_start = stop_func_sal.pc; | |
| step_range_end = stop_func_sal.end; | |
| keep_going (ecs); | |
| } | |
| return; | |
| } | |
| /* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID. | |
| This is used to both functions and to skip over code. */ | |
| static void | |
| insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal, | |
| struct frame_id sr_id) | |
| { | |
| /* There should never be more than one step-resume or longjmp-resume | |
| breakpoint per thread, so we should never be setting a new | |
| step_resume_breakpoint when one is already active. */ | |
| gdb_assert (step_resume_breakpoint == NULL); | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: inserting step-resume breakpoint at 0x%s\n", | |
| paddr_nz (sr_sal.pc)); | |
| step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id, | |
| bp_step_resume); | |
| } | |
| /* Insert a "step-resume breakpoint" at RETURN_FRAME.pc. This is used | |
| to skip a potential signal handler. | |
| This is called with the interrupted function's frame. The signal | |
| handler, when it returns, will resume the interrupted function at | |
| RETURN_FRAME.pc. */ | |
| static void | |
| insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame) | |
| { | |
| struct symtab_and_line sr_sal; | |
| gdb_assert (return_frame != NULL); | |
| init_sal (&sr_sal); /* initialize to zeros */ | |
| sr_sal.pc = gdbarch_addr_bits_remove | |
| (current_gdbarch, get_frame_pc (return_frame)); | |
| sr_sal.section = find_pc_overlay (sr_sal.pc); | |
| insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame)); | |
| } | |
| /* Similar to insert_step_resume_breakpoint_at_frame, except | |
| but a breakpoint at the previous frame's PC. This is used to | |
| skip a function after stepping into it (for "next" or if the called | |
| function has no debugging information). | |
| The current function has almost always been reached by single | |
| stepping a call or return instruction. NEXT_FRAME belongs to the | |
| current function, and the breakpoint will be set at the caller's | |
| resume address. | |
| This is a separate function rather than reusing | |
| insert_step_resume_breakpoint_at_frame in order to avoid | |
| get_prev_frame, which may stop prematurely (see the implementation | |
| of frame_unwind_id for an example). */ | |
| static void | |
| insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame) | |
| { | |
| struct symtab_and_line sr_sal; | |
| /* We shouldn't have gotten here if we don't know where the call site | |
| is. */ | |
| gdb_assert (frame_id_p (frame_unwind_id (next_frame))); | |
| init_sal (&sr_sal); /* initialize to zeros */ | |
| sr_sal.pc = gdbarch_addr_bits_remove | |
| (current_gdbarch, frame_pc_unwind (next_frame)); | |
| sr_sal.section = find_pc_overlay (sr_sal.pc); | |
| insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame)); | |
| } | |
| /* Insert a "longjmp-resume" breakpoint at PC. This is used to set a | |
| new breakpoint at the target of a jmp_buf. The handling of | |
| longjmp-resume uses the same mechanisms used for handling | |
| "step-resume" breakpoints. */ | |
| static void | |
| insert_longjmp_resume_breakpoint (CORE_ADDR pc) | |
| { | |
| /* There should never be more than one step-resume or longjmp-resume | |
| breakpoint per thread, so we should never be setting a new | |
| longjmp_resume_breakpoint when one is already active. */ | |
| gdb_assert (step_resume_breakpoint == NULL); | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "infrun: inserting longjmp-resume breakpoint at 0x%s\n", | |
| paddr_nz (pc)); | |
| step_resume_breakpoint = | |
| set_momentary_breakpoint_at_pc (pc, bp_longjmp_resume); | |
| } | |
| static void | |
| stop_stepping (struct execution_control_state *ecs) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n"); | |
| /* Let callers know we don't want to wait for the inferior anymore. */ | |
| ecs->wait_some_more = 0; | |
| } | |
| /* This function handles various cases where we need to continue | |
| waiting for the inferior. */ | |
| /* (Used to be the keep_going: label in the old wait_for_inferior) */ | |
| static void | |
| keep_going (struct execution_control_state *ecs) | |
| { | |
| /* Save the pc before execution, to compare with pc after stop. */ | |
| prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */ | |
| /* If we did not do break;, it means we should keep running the | |
| inferior and not return to debugger. */ | |
| if (stepping_over_breakpoint && stop_signal != TARGET_SIGNAL_TRAP) | |
| { | |
| /* We took a signal (which we are supposed to pass through to | |
| the inferior, else we'd have done a break above) and we | |
| haven't yet gotten our trap. Simply continue. */ | |
| resume (currently_stepping (tss), stop_signal); | |
| } | |
| else | |
| { | |
| /* Either the trap was not expected, but we are continuing | |
| anyway (the user asked that this signal be passed to the | |
| child) | |
| -- or -- | |
| The signal was SIGTRAP, e.g. it was our signal, but we | |
| decided we should resume from it. | |
| We're going to run this baby now! | |
| Note that insert_breakpoints won't try to re-insert | |
| already inserted breakpoints. Therefore, we don't | |
| care if breakpoints were already inserted, or not. */ | |
| if (tss->stepping_over_breakpoint) | |
| { | |
| if (! use_displaced_stepping (current_gdbarch)) | |
| /* Since we can't do a displaced step, we have to remove | |
| the breakpoint while we step it. To keep things | |
| simple, we remove them all. */ | |
| remove_breakpoints (); | |
| } | |
| else | |
| { | |
| struct gdb_exception e; | |
| /* Stop stepping when inserting breakpoints | |
| has failed. */ | |
| TRY_CATCH (e, RETURN_MASK_ERROR) | |
| { | |
| insert_breakpoints (); | |
| } | |
| if (e.reason < 0) | |
| { | |
| stop_stepping (ecs); | |
| return; | |
| } | |
| } | |
| stepping_over_breakpoint = tss->stepping_over_breakpoint; | |
| /* Do not deliver SIGNAL_TRAP (except when the user explicitly | |
| specifies that such a signal should be delivered to the | |
| target program). | |
| Typically, this would occure when a user is debugging a | |
| target monitor on a simulator: the target monitor sets a | |
| breakpoint; the simulator encounters this break-point and | |
| halts the simulation handing control to GDB; GDB, noteing | |
| that the break-point isn't valid, returns control back to the | |
| simulator; the simulator then delivers the hardware | |
| equivalent of a SIGNAL_TRAP to the program being debugged. */ | |
| if (stop_signal == TARGET_SIGNAL_TRAP && !signal_program[stop_signal]) | |
| stop_signal = TARGET_SIGNAL_0; | |
| resume (currently_stepping (tss), stop_signal); | |
| } | |
| prepare_to_wait (ecs); | |
| } | |
| /* This function normally comes after a resume, before | |
| handle_inferior_event exits. It takes care of any last bits of | |
| housekeeping, and sets the all-important wait_some_more flag. */ | |
| static void | |
| prepare_to_wait (struct execution_control_state *ecs) | |
| { | |
| if (debug_infrun) | |
| fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n"); | |
| if (infwait_state == infwait_normal_state) | |
| { | |
| overlay_cache_invalid = 1; | |
| /* We have to invalidate the registers BEFORE calling | |
| target_wait because they can be loaded from the target while | |
| in target_wait. This makes remote debugging a bit more | |
| efficient for those targets that provide critical registers | |
| as part of their normal status mechanism. */ | |
| registers_changed (); | |
| waiton_ptid = pid_to_ptid (-1); | |
| } | |
| /* This is the old end of the while loop. Let everybody know we | |
| want to wait for the inferior some more and get called again | |
| soon. */ | |
| ecs->wait_some_more = 1; | |
| } | |
| /* Print why the inferior has stopped. We always print something when | |
| the inferior exits, or receives a signal. The rest of the cases are | |
| dealt with later on in normal_stop() and print_it_typical(). Ideally | |
| there should be a call to this function from handle_inferior_event() | |
| each time stop_stepping() is called.*/ | |
| static void | |
| print_stop_reason (enum inferior_stop_reason stop_reason, int stop_info) | |
| { | |
| switch (stop_reason) | |
| { | |
| case END_STEPPING_RANGE: | |
| /* We are done with a step/next/si/ni command. */ | |
| /* For now print nothing. */ | |
| /* Print a message only if not in the middle of doing a "step n" | |
| operation for n > 1 */ | |
| if (!step_multi || !stop_step) | |
| if (ui_out_is_mi_like_p (uiout)) | |
| ui_out_field_string | |
| (uiout, "reason", | |
| async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE)); | |
| break; | |
| case SIGNAL_EXITED: | |
| /* The inferior was terminated by a signal. */ | |
| annotate_signalled (); | |
| if (ui_out_is_mi_like_p (uiout)) | |
| ui_out_field_string | |
| (uiout, "reason", | |
| async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED)); | |
| ui_out_text (uiout, "\nProgram terminated with signal "); | |
| annotate_signal_name (); | |
| ui_out_field_string (uiout, "signal-name", | |
| target_signal_to_name (stop_info)); | |
| annotate_signal_name_end (); | |
| ui_out_text (uiout, ", "); | |
| annotate_signal_string (); | |
| ui_out_field_string (uiout, "signal-meaning", | |
| target_signal_to_string (stop_info)); | |
| annotate_signal_string_end (); | |
| ui_out_text (uiout, ".\n"); | |
| ui_out_text (uiout, "The program no longer exists.\n"); | |
| break; | |
| case EXITED: | |
| /* The inferior program is finished. */ | |
| annotate_exited (stop_info); | |
| if (stop_info) | |
| { | |
| if (ui_out_is_mi_like_p (uiout)) | |
| ui_out_field_string (uiout, "reason", | |
| async_reason_lookup (EXEC_ASYNC_EXITED)); | |
| ui_out_text (uiout, "\nProgram exited with code "); | |
| ui_out_field_fmt (uiout, "exit-code", "0%o", | |
| (unsigned int) stop_info); | |
| ui_out_text (uiout, ".\n"); | |
| } | |
| else | |
| { | |
| if (ui_out_is_mi_like_p (uiout)) | |
| ui_out_field_string | |
| (uiout, "reason", | |
| async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY)); | |
| ui_out_text (uiout, "\nProgram exited normally.\n"); | |
| } | |
| /* Support the --return-child-result option. */ | |
| return_child_result_value = stop_info; | |
| break; | |
| case SIGNAL_RECEIVED: | |
| /* Signal received. The signal table tells us to print about | |
| it. */ | |
| annotate_signal (); | |
| ui_out_text (uiout, "\nProgram received signal "); | |
| annotate_signal_name (); | |
| if (ui_out_is_mi_like_p (uiout)) | |
| ui_out_field_string | |
| (uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED)); | |
| ui_out_field_string (uiout, "signal-name", | |
| target_signal_to_name (stop_info)); | |
| annotate_signal_name_end (); | |
| ui_out_text (uiout, ", "); | |
| annotate_signal_string (); | |
| ui_out_field_string (uiout, "signal-meaning", | |
| target_signal_to_string (stop_info)); | |
| annotate_signal_string_end (); | |
| ui_out_text (uiout, ".\n"); | |
| break; | |
| case NO_HISTORY: | |
| /* Reverse execution: target ran out of history info. */ | |
| ui_out_text (uiout, "\nNo more reverse-execution history.\n"); | |
| break; | |
| default: | |
| internal_error (__FILE__, __LINE__, | |
| _("print_stop_reason: unrecognized enum value")); | |
| break; | |
| } | |
| } | |
| /* Here to return control to GDB when the inferior stops for real. | |
| Print appropriate messages, remove breakpoints, give terminal our modes. | |
| STOP_PRINT_FRAME nonzero means print the executing frame | |
| (pc, function, args, file, line number and line text). | |
| BREAKPOINTS_FAILED nonzero means stop was due to error | |
| attempting to insert breakpoints. */ | |
| void | |
| normal_stop (void) | |
| { | |
| struct target_waitstatus last; | |
| ptid_t last_ptid; | |
| get_last_target_status (&last_ptid, &last); | |
| /* In non-stop mode, we don't want GDB to switch threads behind the | |
| user's back, to avoid races where the user is typing a command to | |
| apply to thread x, but GDB switches to thread y before the user | |
| finishes entering the command. */ | |
| /* As with the notification of thread events, we want to delay | |
| notifying the user that we've switched thread context until | |
| the inferior actually stops. | |
| There's no point in saying anything if the inferior has exited. | |
| Note that SIGNALLED here means "exited with a signal", not | |
| "received a signal". */ | |
| if (!non_stop | |
| && !ptid_equal (previous_inferior_ptid, inferior_ptid) | |
| && target_has_execution | |
| && last.kind != TARGET_WAITKIND_SIGNALLED | |
| && last.kind != TARGET_WAITKIND_EXITED) | |
| { | |
| target_terminal_ours_for_output (); | |
| printf_filtered (_("[Switching to %s]\n"), | |
| target_pid_to_str (inferior_ptid)); | |
| annotate_thread_changed (); | |
| previous_inferior_ptid = inferior_ptid; | |
| } | |
| /* NOTE drow/2004-01-17: Is this still necessary? */ | |
| /* Make sure that the current_frame's pc is correct. This | |
| is a correction for setting up the frame info before doing | |
| gdbarch_decr_pc_after_break */ | |
| if (target_has_execution) | |
| /* FIXME: cagney/2002-12-06: Has the PC changed? Thanks to | |
| gdbarch_decr_pc_after_break, the program counter can change. Ask the | |
| frame code to check for this and sort out any resultant mess. | |
| gdbarch_decr_pc_after_break needs to just go away. */ | |
| deprecated_update_frame_pc_hack (get_current_frame (), read_pc ()); | |
| if (!breakpoints_always_inserted_mode () && target_has_execution) | |
| { | |
| if (remove_breakpoints ()) | |
| { | |
| target_terminal_ours_for_output (); | |
| printf_filtered (_("\ | |
| Cannot remove breakpoints because program is no longer writable.\n\ | |
| It might be running in another process.\n\ | |
| Further execution is probably impossible.\n")); | |
| } | |
| } | |
| /* If an auto-display called a function and that got a signal, | |
| delete that auto-display to avoid an infinite recursion. */ | |
| if (stopped_by_random_signal) | |
| disable_current_display (); | |
| /* Don't print a message if in the middle of doing a "step n" | |
| operation for n > 1 */ | |
| if (step_multi && stop_step) | |
| goto done; | |
| target_terminal_ours (); | |
| /* Set the current source location. This will also happen if we | |
| display the frame below, but the current SAL will be incorrect | |
| during a user hook-stop function. */ | |
| if (target_has_stack && !stop_stack_dummy) | |
| set_current_sal_from_frame (get_current_frame (), 1); | |
| /* Look up the hook_stop and run it (CLI internally handles problem | |
| of stop_command's pre-hook not existing). */ | |
| if (stop_command) | |
| catch_errors (hook_stop_stub, stop_command, | |
| "Error while running hook_stop:\n", RETURN_MASK_ALL); | |
| if (!target_has_stack) | |
| { | |
| goto done; | |
| } | |
| /* Select innermost stack frame - i.e., current frame is frame 0, | |
| and current location is based on that. | |
| Don't do this on return from a stack dummy routine, | |
| or if the program has exited. */ | |
| if (!stop_stack_dummy) | |
| { | |
| select_frame (get_current_frame ()); | |
| /* Print current location without a level number, if | |
| we have changed functions or hit a breakpoint. | |
| Print source line if we have one. | |
| bpstat_print() contains the logic deciding in detail | |
| what to print, based on the event(s) that just occurred. */ | |
| /* If --batch-silent is enabled then there's no need to print the current | |
| source location, and to try risks causing an error message about | |
| missing source files. */ | |
| if (stop_print_frame && !batch_silent) | |
| { | |
| int bpstat_ret; | |
| int source_flag; | |
| int do_frame_printing = 1; | |
| bpstat_ret = bpstat_print (stop_bpstat); | |
| switch (bpstat_ret) | |
| { | |
| case PRINT_UNKNOWN: | |
| /* If we had hit a shared library event breakpoint, | |
| bpstat_print would print out this message. If we hit | |
| an OS-level shared library event, do the same | |
| thing. */ | |
| if (last.kind == TARGET_WAITKIND_LOADED) | |
| { | |
| printf_filtered (_("Stopped due to shared library event\n")); | |
| source_flag = SRC_LINE; /* something bogus */ | |
| do_frame_printing = 0; | |
| break; | |
| } | |
| /* FIXME: cagney/2002-12-01: Given that a frame ID does | |
| (or should) carry around the function and does (or | |
| should) use that when doing a frame comparison. */ | |
| if (stop_step | |
| && frame_id_eq (step_frame_id, | |
| get_frame_id (get_current_frame ())) | |
| && step_start_function == find_pc_function (stop_pc)) | |
| source_flag = SRC_LINE; /* finished step, just print source line */ | |
| else | |
| source_flag = SRC_AND_LOC; /* print location and source line */ | |
| break; | |
| case PRINT_SRC_AND_LOC: | |
| source_flag = SRC_AND_LOC; /* print location and source line */ | |
| break; | |
| case PRINT_SRC_ONLY: | |
| source_flag = SRC_LINE; | |
| break; | |
| case PRINT_NOTHING: | |
| source_flag = SRC_LINE; /* something bogus */ | |
| do_frame_printing = 0; | |
| break; | |
| default: | |
| internal_error (__FILE__, __LINE__, _("Unknown value.")); | |
| } | |
| if (ui_out_is_mi_like_p (uiout)) | |
| { | |
| ui_out_field_int (uiout, "thread-id", | |
| pid_to_thread_id (inferior_ptid)); | |
| if (non_stop) | |
| { | |
| struct cleanup *back_to = make_cleanup_ui_out_list_begin_end | |
| (uiout, "stopped-threads"); | |
| ui_out_field_int (uiout, NULL, | |
| pid_to_thread_id (inferior_ptid)); | |
| do_cleanups (back_to); | |
| } | |
| else | |
| ui_out_field_string (uiout, "stopped-threads", "all"); | |
| } | |
| /* The behavior of this routine with respect to the source | |
| flag is: | |
| SRC_LINE: Print only source line | |
| LOCATION: Print only location | |
| SRC_AND_LOC: Print location and source line */ | |
| if (do_frame_printing) | |
| print_stack_frame (get_selected_frame (NULL), 0, source_flag); | |
| /* Display the auto-display expressions. */ | |
| do_displays (); | |
| } | |
| } | |
| /* Save the function value return registers, if we care. | |
| We might be about to restore their previous contents. */ | |
| if (proceed_to_finish) | |
| { | |
| /* This should not be necessary. */ | |
| if (stop_registers) | |
| regcache_xfree (stop_registers); | |
| /* NB: The copy goes through to the target picking up the value of | |
| all the registers. */ | |
| stop_registers = regcache_dup (get_current_regcache ()); | |
| } | |
| if (stop_stack_dummy) | |
| { | |
| /* Pop the empty frame that contains the stack dummy. POP_FRAME | |
| ends with a setting of the current frame, so we can use that | |
| next. */ | |
| frame_pop (get_current_frame ()); | |
| /* Set stop_pc to what it was before we called the function. | |
| Can't rely on restore_inferior_status because that only gets | |
| called if we don't stop in the called function. */ | |
| stop_pc = read_pc (); | |
| select_frame (get_current_frame ()); | |
| } | |
| done: | |
| annotate_stopped (); | |
| if (!suppress_stop_observer && !step_multi) | |
| observer_notify_normal_stop (stop_bpstat); | |
| /* Delete the breakpoint we stopped at, if it wants to be deleted. | |
| Delete any breakpoint that is to be deleted at the next stop. */ | |
| breakpoint_auto_delete (stop_bpstat); | |
| if (target_has_execution | |
| && last.kind != TARGET_WAITKIND_SIGNALLED | |
| && last.kind != TARGET_WAITKIND_EXITED) | |
| { | |
| if (!non_stop) | |
| set_running (pid_to_ptid (-1), 0); | |
| else | |
| set_running (inferior_ptid, 0); | |
| } | |
| } | |
| static int | |
| hook_stop_stub (void *cmd) | |
| { | |
| execute_cmd_pre_hook ((struct cmd_list_element *) cmd); | |
| return (0); | |
| } | |
| int | |
| signal_stop_state (int signo) | |
| { | |
| /* Always stop on signals if we're just gaining control of the | |
| program. */ | |
| return signal_stop[signo] || stop_soon != NO_STOP_QUIETLY; | |
| } | |
| int | |
| signal_print_state (int signo) | |
| { | |
| return signal_print[signo]; | |
| } | |
| int | |
| signal_pass_state (int signo) | |
| { | |
| return signal_program[signo]; | |
| } | |
| int | |
| signal_stop_update (int signo, int state) | |
| { | |
| int ret = signal_stop[signo]; | |
| signal_stop[signo] = state; | |
| return ret; | |
| } | |
| int | |
| signal_print_update (int signo, int state) | |
| { | |
| int ret = signal_print[signo]; | |
| signal_print[signo] = state; | |
| return ret; | |
| } | |
| int | |
| signal_pass_update (int signo, int state) | |
| { | |
| int ret = signal_program[signo]; | |
| signal_program[signo] = state; | |
| return ret; | |
| } | |
| static void | |
| sig_print_header (void) | |
| { | |
| printf_filtered (_("\ | |
| Signal Stop\tPrint\tPass to program\tDescription\n")); | |
| } | |
| static void | |
| sig_print_info (enum target_signal oursig) | |
| { | |
| char *name = target_signal_to_name (oursig); | |
| int name_padding = 13 - strlen (name); | |
| if (name_padding <= 0) | |
| name_padding = 0; | |
| printf_filtered ("%s", name); | |
| printf_filtered ("%*.*s ", name_padding, name_padding, " "); | |
| printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No"); | |
| printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No"); | |
| printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No"); | |
| printf_filtered ("%s\n", target_signal_to_string (oursig)); | |
| } | |
| /* Specify how various signals in the inferior should be handled. */ | |
| static void | |
| handle_command (char *args, int from_tty) | |
| { | |
| char **argv; | |
| int digits, wordlen; | |
| int sigfirst, signum, siglast; | |
| enum target_signal oursig; | |
| int allsigs; | |
| int nsigs; | |
| unsigned char *sigs; | |
| struct cleanup *old_chain; | |
| if (args == NULL) | |
| { | |
| error_no_arg (_("signal to handle")); | |
| } | |
| /* Allocate and zero an array of flags for which signals to handle. */ | |
| nsigs = (int) TARGET_SIGNAL_LAST; | |
| sigs = (unsigned char *) alloca (nsigs); | |
| memset (sigs, 0, nsigs); | |
| /* Break the command line up into args. */ | |
| argv = buildargv (args); | |
| if (argv == NULL) | |
| { | |
| nomem (0); | |
| } | |
| old_chain = make_cleanup_freeargv (argv); | |
| /* Walk through the args, looking for signal oursigs, signal names, and | |
| actions. Signal numbers and signal names may be interspersed with | |
| actions, with the actions being performed for all signals cumulatively | |
| specified. Signal ranges can be specified as <LOW>-<HIGH>. */ | |
| while (*argv != NULL) | |
| { | |
| wordlen = strlen (*argv); | |
| for (digits = 0; isdigit ((*argv)[digits]); digits++) | |
| {; | |
| } | |
| allsigs = 0; | |
| sigfirst = siglast = -1; | |
| if (wordlen >= 1 && !strncmp (*argv, "all", wordlen)) | |
| { | |
| /* Apply action to all signals except those used by the | |
| debugger. Silently skip those. */ | |
| allsigs = 1; | |
| sigfirst = 0; | |
| siglast = nsigs - 1; | |
| } | |
| else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen)) | |
| { | |
| SET_SIGS (nsigs, sigs, signal_stop); | |
| SET_SIGS (nsigs, sigs, signal_print); | |
| } | |
| else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen)) | |
| { | |
| UNSET_SIGS (nsigs, sigs, signal_program); | |
| } | |
| else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen)) | |
| { | |
| SET_SIGS (nsigs, sigs, signal_print); | |
| } | |
| else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen)) | |
| { | |
| SET_SIGS (nsigs, sigs, signal_program); | |
| } | |
| else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen)) | |
| { | |
| UNSET_SIGS (nsigs, sigs, signal_stop); | |
| } | |
| else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen)) | |
| { | |
| SET_SIGS (nsigs, sigs, signal_program); | |
| } | |
| else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen)) | |
| { | |
| UNSET_SIGS (nsigs, sigs, signal_print); | |
| UNSET_SIGS (nsigs, sigs, signal_stop); | |
| } | |
| else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen)) | |
| { | |
| UNSET_SIGS (nsigs, sigs, signal_program); | |
| } | |
| else if (digits > 0) | |
| { | |
| /* It is numeric. The numeric signal refers to our own | |
| internal signal numbering from target.h, not to host/target | |
| signal number. This is a feature; users really should be | |
| using symbolic names anyway, and the common ones like | |
| SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */ | |
| sigfirst = siglast = (int) | |
| target_signal_from_command (atoi (*argv)); | |
| if ((*argv)[digits] == '-') | |
| { | |
| siglast = (int) | |
| target_signal_from_command (atoi ((*argv) + digits + 1)); | |
| } | |
| if (sigfirst > siglast) | |
| { | |
| /* Bet he didn't figure we'd think of this case... */ | |
| signum = sigfirst; | |
| sigfirst = siglast; | |
| siglast = signum; | |
| } | |
| } | |
| else | |
| { | |
| oursig = target_signal_from_name (*argv); | |
| if (oursig != TARGET_SIGNAL_UNKNOWN) | |
| { | |
| sigfirst = siglast = (int) oursig; | |
| } | |
| else | |
| { | |
| /* Not a number and not a recognized flag word => complain. */ | |
| error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv); | |
| } | |
| } | |
| /* If any signal numbers or symbol names were found, set flags for | |
| which signals to apply actions to. */ | |
| for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++) | |
| { | |
| switch ((enum target_signal) signum) | |
| { | |
| case TARGET_SIGNAL_TRAP: | |
| case TARGET_SIGNAL_INT: | |
| if (!allsigs && !sigs[signum]) | |
| { | |
| if (query ("%s is used by the debugger.\n\ | |
| Are you sure you want to change it? ", target_signal_to_name ((enum target_signal) signum))) | |
| { | |
| sigs[signum] = 1; | |
| } | |
| else | |
| { | |
| printf_unfiltered (_("Not confirmed, unchanged.\n")); | |
| gdb_flush (gdb_stdout); | |
| } | |
| } | |
| break; | |
| case TARGET_SIGNAL_0: | |
| case TARGET_SIGNAL_DEFAULT: | |
| case TARGET_SIGNAL_UNKNOWN: | |
| /* Make sure that "all" doesn't print these. */ | |
| break; | |
| default: | |
| sigs[signum] = 1; | |
| break; | |
| } | |
| } | |
| argv++; | |
| } | |
| target_notice_signals (inferior_ptid); | |
| if (from_tty) | |
| { | |
| /* Show the results. */ | |
| sig_print_header (); | |
| for (signum = 0; signum < nsigs; signum++) | |
| { | |
| if (sigs[signum]) | |
| { | |
| sig_print_info (signum); | |
| } | |
| } | |
| } | |
| do_cleanups (old_chain); | |
| } | |
| static void | |
| xdb_handle_command (char *args, int from_tty) | |
| { | |
| char **argv; | |
| struct cleanup *old_chain; | |
| /* Break the command line up into args. */ | |
| argv = buildargv (args); | |
| if (argv == NULL) | |
| { | |
| nomem (0); | |
| } | |
| old_chain = make_cleanup_freeargv (argv); | |
| if (argv[1] != (char *) NULL) | |
| { | |
| char *argBuf; | |
| int bufLen; | |
| bufLen = strlen (argv[0]) + 20; | |
| argBuf = (char *) xmalloc (bufLen); | |
| if (argBuf) | |
| { | |
| int validFlag = 1; | |
| enum target_signal oursig; | |
| oursig = target_signal_from_name (argv[0]); | |
| memset (argBuf, 0, bufLen); | |
| if (strcmp (argv[1], "Q") == 0) | |
| sprintf (argBuf, "%s %s", argv[0], "noprint"); | |
| else | |
| { | |
| if (strcmp (argv[1], "s") == 0) | |
| { | |
| if (!signal_stop[oursig]) | |
| sprintf (argBuf, "%s %s", argv[0], "stop"); | |
| else | |
| sprintf (argBuf, "%s %s", argv[0], "nostop"); | |
| } | |
| else if (strcmp (argv[1], "i") == 0) | |
| { | |
| if (!signal_program[oursig]) | |
| sprintf (argBuf, "%s %s", argv[0], "pass"); | |
| else | |
| sprintf (argBuf, "%s %s", argv[0], "nopass"); | |
| } | |
| else if (strcmp (argv[1], "r") == 0) | |
| { | |
| if (!signal_print[oursig]) | |
| sprintf (argBuf, "%s %s", argv[0], "print"); | |
| else | |
| sprintf (argBuf, "%s %s", argv[0], "noprint"); | |
| } | |
| else | |
| validFlag = 0; | |
| } | |
| if (validFlag) | |
| handle_command (argBuf, from_tty); | |
| else | |
| printf_filtered (_("Invalid signal handling flag.\n")); | |
| if (argBuf) | |
| xfree (argBuf); | |
| } | |
| } | |
| do_cleanups (old_chain); | |
| } | |
| /* Print current contents of the tables set by the handle command. | |
| It is possible we should just be printing signals actually used | |
| by the current target (but for things to work right when switching | |
| targets, all signals should be in the signal tables). */ | |
| static void | |
| signals_info (char *signum_exp, int from_tty) | |
| { | |
| enum target_signal oursig; | |
| sig_print_header (); | |
| if (signum_exp) | |
| { | |
| /* First see if this is a symbol name. */ | |
| oursig = target_signal_from_name (signum_exp); | |
| if (oursig == TARGET_SIGNAL_UNKNOWN) | |
| { | |
| /* No, try numeric. */ | |
| oursig = | |
| target_signal_from_command (parse_and_eval_long (signum_exp)); | |
| } | |
| sig_print_info (oursig); | |
| return; | |
| } | |
| printf_filtered ("\n"); | |
| /* These ugly casts brought to you by the native VAX compiler. */ | |
| for (oursig = TARGET_SIGNAL_FIRST; | |
| (int) oursig < (int) TARGET_SIGNAL_LAST; | |
| oursig = (enum target_signal) ((int) oursig + 1)) | |
| { | |
| QUIT; | |
| if (oursig != TARGET_SIGNAL_UNKNOWN | |
| && oursig != TARGET_SIGNAL_DEFAULT && oursig != TARGET_SIGNAL_0) | |
| sig_print_info (oursig); | |
| } | |
| printf_filtered (_("\nUse the \"handle\" command to change these tables.\n")); | |
| } | |
| struct inferior_status | |
| { | |
| enum target_signal stop_signal; | |
| CORE_ADDR stop_pc; | |
| bpstat stop_bpstat; | |
| int stop_step; | |
| int stop_stack_dummy; | |
| int stopped_by_random_signal; | |
| int stepping_over_breakpoint; | |
| CORE_ADDR step_range_start; | |
| CORE_ADDR step_range_end; | |
| struct frame_id step_frame_id; | |
| enum step_over_calls_kind step_over_calls; | |
| CORE_ADDR step_resume_break_address; | |
| int stop_after_trap; | |
| int stop_soon; | |
| /* These are here because if call_function_by_hand has written some | |
| registers and then decides to call error(), we better not have changed | |
| any registers. */ | |
| struct regcache *registers; | |
| /* A frame unique identifier. */ | |
| struct frame_id selected_frame_id; | |
| int breakpoint_proceeded; | |
| int restore_stack_info; | |
| int proceed_to_finish; | |
| }; | |
| void | |
| write_inferior_status_register (struct inferior_status *inf_status, int regno, | |
| LONGEST val) | |
| { | |
| int size = register_size (current_gdbarch, regno); | |
| void *buf = alloca (size); | |
| store_signed_integer (buf, size, val); | |
| regcache_raw_write (inf_status->registers, regno, buf); | |
| } | |
| /* Save all of the information associated with the inferior<==>gdb | |
| connection. INF_STATUS is a pointer to a "struct inferior_status" | |
| (defined in inferior.h). */ | |
| struct inferior_status * | |
| save_inferior_status (int restore_stack_info) | |
| { | |
| struct inferior_status *inf_status = XMALLOC (struct inferior_status); | |
| inf_status->stop_signal = stop_signal; | |
| inf_status->stop_pc = stop_pc; | |
| inf_status->stop_step = stop_step; | |
| inf_status->stop_stack_dummy = stop_stack_dummy; | |
| inf_status->stopped_by_random_signal = stopped_by_random_signal; | |
| inf_status->stepping_over_breakpoint = stepping_over_breakpoint; | |
| inf_status->step_range_start = step_range_start; | |
| inf_status->step_range_end = step_range_end; | |
| inf_status->step_frame_id = step_frame_id; | |
| inf_status->step_over_calls = step_over_calls; | |
| inf_status->stop_after_trap = stop_after_trap; | |
| inf_status->stop_soon = stop_soon; | |
| /* Save original bpstat chain here; replace it with copy of chain. | |
| If caller's caller is walking the chain, they'll be happier if we | |
| hand them back the original chain when restore_inferior_status is | |
| called. */ | |
| inf_status->stop_bpstat = stop_bpstat; | |
| stop_bpstat = bpstat_copy (stop_bpstat); | |
| inf_status->breakpoint_proceeded = breakpoint_proceeded; | |
| inf_status->restore_stack_info = restore_stack_info; | |
| inf_status->proceed_to_finish = proceed_to_finish; | |
| inf_status->registers = regcache_dup (get_current_regcache ()); | |
| inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL)); | |
| return inf_status; | |
| } | |
| static int | |
| restore_selected_frame (void *args) | |
| { | |
| struct frame_id *fid = (struct frame_id *) args; | |
| struct frame_info *frame; | |
| frame = frame_find_by_id (*fid); | |
| /* If inf_status->selected_frame_id is NULL, there was no previously | |
| selected frame. */ | |
| if (frame == NULL) | |
| { | |
| warning (_("Unable to restore previously selected frame.")); | |
| return 0; | |
| } | |
| select_frame (frame); | |
| return (1); | |
| } | |
| void | |
| restore_inferior_status (struct inferior_status *inf_status) | |
| { | |
| stop_signal = inf_status->stop_signal; | |
| stop_pc = inf_status->stop_pc; | |
| stop_step = inf_status->stop_step; | |
| stop_stack_dummy = inf_status->stop_stack_dummy; | |
| stopped_by_random_signal = inf_status->stopped_by_random_signal; | |
| stepping_over_breakpoint = inf_status->stepping_over_breakpoint; | |
| step_range_start = inf_status->step_range_start; | |
| step_range_end = inf_status->step_range_end; | |
| step_frame_id = inf_status->step_frame_id; | |
| step_over_calls = inf_status->step_over_calls; | |
| stop_after_trap = inf_status->stop_after_trap; | |
| stop_soon = inf_status->stop_soon; | |
| bpstat_clear (&stop_bpstat); | |
| stop_bpstat = inf_status->stop_bpstat; | |
| breakpoint_proceeded = inf_status->breakpoint_proceeded; | |
| proceed_to_finish = inf_status->proceed_to_finish; | |
| /* The inferior can be gone if the user types "print exit(0)" | |
| (and perhaps other times). */ | |
| if (target_has_execution) | |
| /* NB: The register write goes through to the target. */ | |
| regcache_cpy (get_current_regcache (), inf_status->registers); | |
| regcache_xfree (inf_status->registers); | |
| /* FIXME: If we are being called after stopping in a function which | |
| is called from gdb, we should not be trying to restore the | |
| selected frame; it just prints a spurious error message (The | |
| message is useful, however, in detecting bugs in gdb (like if gdb | |
| clobbers the stack)). In fact, should we be restoring the | |
| inferior status at all in that case? . */ | |
| if (target_has_stack && inf_status->restore_stack_info) | |
| { | |
| /* The point of catch_errors is that if the stack is clobbered, | |
| walking the stack might encounter a garbage pointer and | |
| error() trying to dereference it. */ | |
| if (catch_errors | |
| (restore_selected_frame, &inf_status->selected_frame_id, | |
| "Unable to restore previously selected frame:\n", | |
| RETURN_MASK_ERROR) == 0) | |
| /* Error in restoring the selected frame. Select the innermost | |
| frame. */ | |
| select_frame (get_current_frame ()); | |
| } | |
| xfree (inf_status); | |
| } | |
| static void | |
| do_restore_inferior_status_cleanup (void *sts) | |
| { | |
| restore_inferior_status (sts); | |
| } | |
| struct cleanup * | |
| make_cleanup_restore_inferior_status (struct inferior_status *inf_status) | |
| { | |
| return make_cleanup (do_restore_inferior_status_cleanup, inf_status); | |
| } | |
| void | |
| discard_inferior_status (struct inferior_status *inf_status) | |
| { | |
| /* See save_inferior_status for info on stop_bpstat. */ | |
| bpstat_clear (&inf_status->stop_bpstat); | |
| regcache_xfree (inf_status->registers); | |
| xfree (inf_status); | |
| } | |
| int | |
| inferior_has_forked (ptid_t pid, ptid_t *child_pid) | |
| { | |
| struct target_waitstatus last; | |
| ptid_t last_ptid; | |
| get_last_target_status (&last_ptid, &last); | |
| if (last.kind != TARGET_WAITKIND_FORKED) | |
| return 0; | |
| if (!ptid_equal (last_ptid, pid)) | |
| return 0; | |
| *child_pid = last.value.related_pid; | |
| return 1; | |
| } | |
| int | |
| inferior_has_vforked (ptid_t pid, ptid_t *child_pid) | |
| { | |
| struct target_waitstatus last; | |
| ptid_t last_ptid; | |
| get_last_target_status (&last_ptid, &last); | |
| if (last.kind != TARGET_WAITKIND_VFORKED) | |
| return 0; | |
| if (!ptid_equal (last_ptid, pid)) | |
| return 0; | |
| *child_pid = last.value.related_pid; | |
| return 1; | |
| } | |
| int | |
| inferior_has_execd (ptid_t pid, char **execd_pathname) | |
| { | |
| struct target_waitstatus last; | |
| ptid_t last_ptid; | |
| get_last_target_status (&last_ptid, &last); | |
| if (last.kind != TARGET_WAITKIND_EXECD) | |
| return 0; | |
| if (!ptid_equal (last_ptid, pid)) | |
| return 0; | |
| *execd_pathname = xstrdup (last.value.execd_pathname); | |
| return 1; | |
| } | |
| /* Oft used ptids */ | |
| ptid_t null_ptid; | |
| ptid_t minus_one_ptid; | |
| /* Create a ptid given the necessary PID, LWP, and TID components. */ | |
| ptid_t | |
| ptid_build (int pid, long lwp, long tid) | |
| { | |
| ptid_t ptid; | |
| ptid.pid = pid; | |
| ptid.lwp = lwp; | |
| ptid.tid = tid; | |
| return ptid; | |
| } | |
| /* Create a ptid from just a pid. */ | |
| ptid_t | |
| pid_to_ptid (int pid) | |
| { | |
| return ptid_build (pid, 0, 0); | |
| } | |
| /* Fetch the pid (process id) component from a ptid. */ | |
| int | |
| ptid_get_pid (ptid_t ptid) | |
| { | |
| return ptid.pid; | |
| } | |
| /* Fetch the lwp (lightweight process) component from a ptid. */ | |
| long | |
| ptid_get_lwp (ptid_t ptid) | |
| { | |
| return ptid.lwp; | |
| } | |
| /* Fetch the tid (thread id) component from a ptid. */ | |
| long | |
| ptid_get_tid (ptid_t ptid) | |
| { | |
| return ptid.tid; | |
| } | |
| /* ptid_equal() is used to test equality of two ptids. */ | |
| int | |
| ptid_equal (ptid_t ptid1, ptid_t ptid2) | |
| { | |
| return (ptid1.pid == ptid2.pid && ptid1.lwp == ptid2.lwp | |
| && ptid1.tid == ptid2.tid); | |
| } | |
| /* restore_inferior_ptid() will be used by the cleanup machinery | |
| to restore the inferior_ptid value saved in a call to | |
| save_inferior_ptid(). */ | |
| static void | |
| restore_inferior_ptid (void *arg) | |
| { | |
| ptid_t *saved_ptid_ptr = arg; | |
| inferior_ptid = *saved_ptid_ptr; | |
| xfree (arg); | |
| } | |
| /* Save the value of inferior_ptid so that it may be restored by a | |
| later call to do_cleanups(). Returns the struct cleanup pointer | |
| needed for later doing the cleanup. */ | |
| struct cleanup * | |
| save_inferior_ptid (void) | |
| { | |
| ptid_t *saved_ptid_ptr; | |
| saved_ptid_ptr = xmalloc (sizeof (ptid_t)); | |
| *saved_ptid_ptr = inferior_ptid; | |
| return make_cleanup (restore_inferior_ptid, saved_ptid_ptr); | |
| } | |
| /* User interface for reverse debugging: | |
| Set exec-direction / show exec-direction commands | |
| (returns error unless target implements to_set_exec_direction method). */ | |
| enum exec_direction_kind execution_direction = EXEC_FORWARD; | |
| static const char exec_forward[] = "forward"; | |
| static const char exec_reverse[] = "reverse"; | |
| static const char *exec_direction = exec_forward; | |
| static const char *exec_direction_names[] = { | |
| exec_forward, | |
| exec_reverse, | |
| NULL | |
| }; | |
| static void | |
| set_exec_direction_func (char *args, int from_tty, | |
| struct cmd_list_element *cmd) | |
| { | |
| if (target_can_execute_reverse) | |
| { | |
| if (!strcmp (exec_direction, exec_forward)) | |
| execution_direction = EXEC_FORWARD; | |
| else if (!strcmp (exec_direction, exec_reverse)) | |
| execution_direction = EXEC_REVERSE; | |
| } | |
| } | |
| static void | |
| show_exec_direction_func (struct ui_file *out, int from_tty, | |
| struct cmd_list_element *cmd, const char *value) | |
| { | |
| switch (execution_direction) { | |
| case EXEC_FORWARD: | |
| fprintf_filtered (out, _("Forward.\n")); | |
| break; | |
| case EXEC_REVERSE: | |
| fprintf_filtered (out, _("Reverse.\n")); | |
| break; | |
| case EXEC_ERROR: | |
| default: | |
| fprintf_filtered (out, | |
| _("Forward (target `%s' does not support exec-direction).\n"), | |
| target_shortname); | |
| break; | |
| } | |
| } | |
| /* User interface for non-stop mode. */ | |
| int non_stop = 0; | |
| static int non_stop_1 = 0; | |
| static void | |
| set_non_stop (char *args, int from_tty, | |
| struct cmd_list_element *c) | |
| { | |
| if (target_has_execution) | |
| { | |
| non_stop_1 = non_stop; | |
| error (_("Cannot change this setting while the inferior is running.")); | |
| } | |
| non_stop = non_stop_1; | |
| } | |
| static void | |
| show_non_stop (struct ui_file *file, int from_tty, | |
| struct cmd_list_element *c, const char *value) | |
| { | |
| fprintf_filtered (file, | |
| _("Controlling the inferior in non-stop mode is %s.\n"), | |
| value); | |
| } | |
| void | |
| _initialize_infrun (void) | |
| { | |
| int i; | |
| int numsigs; | |
| struct cmd_list_element *c; | |
| add_info ("signals", signals_info, _("\ | |
| What debugger does when program gets various signals.\n\ | |
| Specify a signal as argument to print info on that signal only.")); | |
| add_info_alias ("handle", "signals", 0); | |
| add_com ("handle", class_run, handle_command, _("\ | |
| Specify how to handle a signal.\n\ | |
| Args are signals and actions to apply to those signals.\n\ | |
| Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\ | |
| from 1-15 are allowed for compatibility with old versions of GDB.\n\ | |
| Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\ | |
| The special arg \"all\" is recognized to mean all signals except those\n\ | |
| used by the debugger, typically SIGTRAP and SIGINT.\n\ | |
| Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\ | |
| \"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\ | |
| Stop means reenter debugger if this signal happens (implies print).\n\ | |
| Print means print a message if this signal happens.\n\ | |
| Pass means let program see this signal; otherwise program doesn't know.\n\ | |
| Ignore is a synonym for nopass and noignore is a synonym for pass.\n\ | |
| Pass and Stop may be combined.")); | |
| if (xdb_commands) | |
| { | |
| add_com ("lz", class_info, signals_info, _("\ | |
| What debugger does when program gets various signals.\n\ | |
| Specify a signal as argument to print info on that signal only.")); | |
| add_com ("z", class_run, xdb_handle_command, _("\ | |
| Specify how to handle a signal.\n\ | |
| Args are signals and actions to apply to those signals.\n\ | |
| Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\ | |
| from 1-15 are allowed for compatibility with old versions of GDB.\n\ | |
| Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\ | |
| The special arg \"all\" is recognized to mean all signals except those\n\ | |
| used by the debugger, typically SIGTRAP and SIGINT.\n\ | |
| Recognized actions include \"s\" (toggles between stop and nostop), \n\ | |
| \"r\" (toggles between print and noprint), \"i\" (toggles between pass and \ | |
| nopass), \"Q\" (noprint)\n\ | |
| Stop means reenter debugger if this signal happens (implies print).\n\ | |
| Print means print a message if this signal happens.\n\ | |
| Pass means let program see this signal; otherwise program doesn't know.\n\ | |
| Ignore is a synonym for nopass and noignore is a synonym for pass.\n\ | |
| Pass and Stop may be combined.")); | |
| } | |
| if (!dbx_commands) | |
| stop_command = add_cmd ("stop", class_obscure, | |
| not_just_help_class_command, _("\ | |
| There is no `stop' command, but you can set a hook on `stop'.\n\ | |
| This allows you to set a list of commands to be run each time execution\n\ | |
| of the program stops."), &cmdlist); | |
| add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\ | |
| Set inferior debugging."), _("\ | |
| Show inferior debugging."), _("\ | |
| When non-zero, inferior specific debugging is enabled."), | |
| NULL, | |
| show_debug_infrun, | |
| &setdebuglist, &showdebuglist); | |
| add_setshow_boolean_cmd ("displaced", class_maintenance, &debug_displaced, _("\ | |
| Set displaced stepping debugging."), _("\ | |
| Show displaced stepping debugging."), _("\ | |
| When non-zero, displaced stepping specific debugging is enabled."), | |
| NULL, | |
| show_debug_displaced, | |
| &setdebuglist, &showdebuglist); | |
| add_setshow_boolean_cmd ("non-stop", no_class, | |
| &non_stop_1, _("\ | |
| Set whether gdb controls the inferior in non-stop mode."), _("\ | |
| Show whether gdb controls the inferior in non-stop mode."), _("\ | |
| When debugging a multi-threaded program and this setting is\n\ | |
| off (the default, also called all-stop mode), when one thread stops\n\ | |
| (for a breakpoint, watchpoint, exception, or similar events), GDB stops\n\ | |
| all other threads in the program while you interact with the thread of\n\ | |
| interest. When you continue or step a thread, you can allow the other\n\ | |
| threads to run, or have them remain stopped, but while you inspect any\n\ | |
| thread's state, all threads stop.\n\ | |
| \n\ | |
| In non-stop mode, when one thread stops, other threads can continue\n\ | |
| to run freely. You'll be able to step each thread independently,\n\ | |
| leave it stopped or free to run as needed."), | |
| set_non_stop, | |
| show_non_stop, | |
| &setlist, | |
| &showlist); | |
| numsigs = (int) TARGET_SIGNAL_LAST; | |
| signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs); | |
| signal_print = (unsigned char *) | |
| xmalloc (sizeof (signal_print[0]) * numsigs); | |
| signal_program = (unsigned char *) | |
| xmalloc (sizeof (signal_program[0]) * numsigs); | |
| for (i = 0; i < numsigs; i++) | |
| { | |
| signal_stop[i] = 1; | |
| signal_print[i] = 1; | |
| signal_program[i] = 1; | |
| } | |
| /* Signals caused by debugger's own actions | |
| should not be given to the program afterwards. */ | |
| signal_program[TARGET_SIGNAL_TRAP] = 0; | |
| signal_program[TARGET_SIGNAL_INT] = 0; | |
| /* Signals that are not errors should not normally enter the debugger. */ | |
| signal_stop[TARGET_SIGNAL_ALRM] = 0; | |
| signal_print[TARGET_SIGNAL_ALRM] = 0; | |
| signal_stop[TARGET_SIGNAL_VTALRM] = 0; | |
| signal_print[TARGET_SIGNAL_VTALRM] = 0; | |
| signal_stop[TARGET_SIGNAL_PROF] = 0; | |
| signal_print[TARGET_SIGNAL_PROF] = 0; | |
| signal_stop[TARGET_SIGNAL_CHLD] = 0; | |
| signal_print[TARGET_SIGNAL_CHLD] = 0; | |
| signal_stop[TARGET_SIGNAL_IO] = 0; | |
| signal_print[TARGET_SIGNAL_IO] = 0; | |
| signal_stop[TARGET_SIGNAL_POLL] = 0; | |
| signal_print[TARGET_SIGNAL_POLL] = 0; | |
| signal_stop[TARGET_SIGNAL_URG] = 0; | |
| signal_print[TARGET_SIGNAL_URG] = 0; | |
| signal_stop[TARGET_SIGNAL_WINCH] = 0; | |
| signal_print[TARGET_SIGNAL_WINCH] = 0; | |
| /* These signals are used internally by user-level thread | |
| implementations. (See signal(5) on Solaris.) Like the above | |
| signals, a healthy program receives and handles them as part of | |
| its normal operation. */ | |
| signal_stop[TARGET_SIGNAL_LWP] = 0; | |
| signal_print[TARGET_SIGNAL_LWP] = 0; | |
| signal_stop[TARGET_SIGNAL_WAITING] = 0; | |
| signal_print[TARGET_SIGNAL_WAITING] = 0; | |
| signal_stop[TARGET_SIGNAL_CANCEL] = 0; | |
| signal_print[TARGET_SIGNAL_CANCEL] = 0; | |
| add_setshow_zinteger_cmd ("stop-on-solib-events", class_support, | |
| &stop_on_solib_events, _("\ | |
| Set stopping for shared library events."), _("\ | |
| Show stopping for shared library events."), _("\ | |
| If nonzero, gdb will give control to the user when the dynamic linker\n\ | |
| notifies gdb of shared library events. The most common event of interest\n\ | |
| to the user would be loading/unloading of a new library."), | |
| NULL, | |
| show_stop_on_solib_events, | |
| &setlist, &showlist); | |
| add_setshow_enum_cmd ("follow-fork-mode", class_run, | |
| follow_fork_mode_kind_names, | |
| &follow_fork_mode_string, _("\ | |
| Set debugger response to a program call of fork or vfork."), _("\ | |
| Show debugger response to a program call of fork or vfork."), _("\ | |
| A fork or vfork creates a new process. follow-fork-mode can be:\n\ | |
| parent - the original process is debugged after a fork\n\ | |
| child - the new process is debugged after a fork\n\ | |
| The unfollowed process will continue to run.\n\ | |
| By default, the debugger will follow the parent process."), | |
| NULL, | |
| show_follow_fork_mode_string, | |
| &setlist, &showlist); | |
| add_setshow_enum_cmd ("scheduler-locking", class_run, | |
| scheduler_enums, &scheduler_mode, _("\ | |
| Set mode for locking scheduler during execution."), _("\ | |
| Show mode for locking scheduler during execution."), _("\ | |
| off == no locking (threads may preempt at any time)\n\ | |
| on == full locking (no thread except the current thread may run)\n\ | |
| step == scheduler locked during every single-step operation.\n\ | |
| In this mode, no other thread may run during a step command.\n\ | |
| Other threads may run while stepping over a function call ('next')."), | |
| set_schedlock_func, /* traps on target vector */ | |
| show_scheduler_mode, | |
| &setlist, &showlist); | |
| add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\ | |
| Set mode of the step operation."), _("\ | |
| Show mode of the step operation."), _("\ | |
| When set, doing a step over a function without debug line information\n\ | |
| will stop at the first instruction of that function. Otherwise, the\n\ | |
| function is skipped and the step command stops at a different source line."), | |
| NULL, | |
| show_step_stop_if_no_debug, | |
| &setlist, &showlist); | |
| add_setshow_boolean_cmd ("can-use-displaced-stepping", class_maintenance, | |
| &can_use_displaced_stepping, _("\ | |
| Set debugger's willingness to use displaced stepping."), _("\ | |
| Show debugger's willingness to use displaced stepping."), _("\ | |
| If zero, gdb will not use displaced stepping to step over\n\ | |
| breakpoints, even if such is supported by the target."), | |
| NULL, | |
| show_can_use_displaced_stepping, | |
| &maintenance_set_cmdlist, | |
| &maintenance_show_cmdlist); | |
| add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names, | |
| &exec_direction, _("Set direction of execution.\n\ | |
| Options are 'forward' or 'reverse'."), | |
| _("Show direction of execution (forward/reverse)."), | |
| _("Tells gdb whether to execute forward or backward."), | |
| set_exec_direction_func, show_exec_direction_func, | |
| &setlist, &showlist); | |
| /* ptid initializations */ | |
| null_ptid = ptid_build (0, 0, 0); | |
| minus_one_ptid = ptid_build (-1, 0, 0); | |
| inferior_ptid = null_ptid; | |
| target_last_wait_ptid = minus_one_ptid; | |
| displaced_step_ptid = null_ptid; | |
| } |