| /* Target-dependent code for GDB, the GNU debugger. | |
| Copyright (C) 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, | |
| 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "frame.h" | |
| #include "inferior.h" | |
| #include "symtab.h" | |
| #include "target.h" | |
| #include "gdbcore.h" | |
| #include "gdbcmd.h" | |
| #include "symfile.h" | |
| #include "objfiles.h" | |
| #include "regcache.h" | |
| #include "value.h" | |
| #include "osabi.h" | |
| #include "regset.h" | |
| #include "solib-svr4.h" | |
| #include "ppc-tdep.h" | |
| #include "ppc-linux-tdep.h" | |
| #include "trad-frame.h" | |
| #include "frame-unwind.h" | |
| #include "tramp-frame.h" | |
| #include "features/rs6000/powerpc-32l.c" | |
| #include "features/rs6000/powerpc-altivec32l.c" | |
| #include "features/rs6000/powerpc-64l.c" | |
| #include "features/rs6000/powerpc-altivec64l.c" | |
| #include "features/rs6000/powerpc-e500l.c" | |
| /* ppc_linux_memory_remove_breakpoints attempts to remove a breakpoint | |
| in much the same fashion as memory_remove_breakpoint in mem-break.c, | |
| but is careful not to write back the previous contents if the code | |
| in question has changed in between inserting the breakpoint and | |
| removing it. | |
| Here is the problem that we're trying to solve... | |
| Once upon a time, before introducing this function to remove | |
| breakpoints from the inferior, setting a breakpoint on a shared | |
| library function prior to running the program would not work | |
| properly. In order to understand the problem, it is first | |
| necessary to understand a little bit about dynamic linking on | |
| this platform. | |
| A call to a shared library function is accomplished via a bl | |
| (branch-and-link) instruction whose branch target is an entry | |
| in the procedure linkage table (PLT). The PLT in the object | |
| file is uninitialized. To gdb, prior to running the program, the | |
| entries in the PLT are all zeros. | |
| Once the program starts running, the shared libraries are loaded | |
| and the procedure linkage table is initialized, but the entries in | |
| the table are not (necessarily) resolved. Once a function is | |
| actually called, the code in the PLT is hit and the function is | |
| resolved. In order to better illustrate this, an example is in | |
| order; the following example is from the gdb testsuite. | |
| We start the program shmain. | |
| [kev@arroyo testsuite]$ ../gdb gdb.base/shmain | |
| [...] | |
| We place two breakpoints, one on shr1 and the other on main. | |
| (gdb) b shr1 | |
| Breakpoint 1 at 0x100409d4 | |
| (gdb) b main | |
| Breakpoint 2 at 0x100006a0: file gdb.base/shmain.c, line 44. | |
| Examine the instruction (and the immediatly following instruction) | |
| upon which the breakpoint was placed. Note that the PLT entry | |
| for shr1 contains zeros. | |
| (gdb) x/2i 0x100409d4 | |
| 0x100409d4 <shr1>: .long 0x0 | |
| 0x100409d8 <shr1+4>: .long 0x0 | |
| Now run 'til main. | |
| (gdb) r | |
| Starting program: gdb.base/shmain | |
| Breakpoint 1 at 0xffaf790: file gdb.base/shr1.c, line 19. | |
| Breakpoint 2, main () | |
| at gdb.base/shmain.c:44 | |
| 44 g = 1; | |
| Examine the PLT again. Note that the loading of the shared | |
| library has initialized the PLT to code which loads a constant | |
| (which I think is an index into the GOT) into r11 and then | |
| branchs a short distance to the code which actually does the | |
| resolving. | |
| (gdb) x/2i 0x100409d4 | |
| 0x100409d4 <shr1>: li r11,4 | |
| 0x100409d8 <shr1+4>: b 0x10040984 <sg+4> | |
| (gdb) c | |
| Continuing. | |
| Breakpoint 1, shr1 (x=1) | |
| at gdb.base/shr1.c:19 | |
| 19 l = 1; | |
| Now we've hit the breakpoint at shr1. (The breakpoint was | |
| reset from the PLT entry to the actual shr1 function after the | |
| shared library was loaded.) Note that the PLT entry has been | |
| resolved to contain a branch that takes us directly to shr1. | |
| (The real one, not the PLT entry.) | |
| (gdb) x/2i 0x100409d4 | |
| 0x100409d4 <shr1>: b 0xffaf76c <shr1> | |
| 0x100409d8 <shr1+4>: b 0x10040984 <sg+4> | |
| The thing to note here is that the PLT entry for shr1 has been | |
| changed twice. | |
| Now the problem should be obvious. GDB places a breakpoint (a | |
| trap instruction) on the zero value of the PLT entry for shr1. | |
| Later on, after the shared library had been loaded and the PLT | |
| initialized, GDB gets a signal indicating this fact and attempts | |
| (as it always does when it stops) to remove all the breakpoints. | |
| The breakpoint removal was causing the former contents (a zero | |
| word) to be written back to the now initialized PLT entry thus | |
| destroying a portion of the initialization that had occurred only a | |
| short time ago. When execution continued, the zero word would be | |
| executed as an instruction an an illegal instruction trap was | |
| generated instead. (0 is not a legal instruction.) | |
| The fix for this problem was fairly straightforward. The function | |
| memory_remove_breakpoint from mem-break.c was copied to this file, | |
| modified slightly, and renamed to ppc_linux_memory_remove_breakpoint. | |
| In tm-linux.h, MEMORY_REMOVE_BREAKPOINT is defined to call this new | |
| function. | |
| The differences between ppc_linux_memory_remove_breakpoint () and | |
| memory_remove_breakpoint () are minor. All that the former does | |
| that the latter does not is check to make sure that the breakpoint | |
| location actually contains a breakpoint (trap instruction) prior | |
| to attempting to write back the old contents. If it does contain | |
| a trap instruction, we allow the old contents to be written back. | |
| Otherwise, we silently do nothing. | |
| The big question is whether memory_remove_breakpoint () should be | |
| changed to have the same functionality. The downside is that more | |
| traffic is generated for remote targets since we'll have an extra | |
| fetch of a memory word each time a breakpoint is removed. | |
| For the time being, we'll leave this self-modifying-code-friendly | |
| version in ppc-linux-tdep.c, but it ought to be migrated somewhere | |
| else in the event that some other platform has similar needs with | |
| regard to removing breakpoints in some potentially self modifying | |
| code. */ | |
| int | |
| ppc_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, | |
| struct bp_target_info *bp_tgt) | |
| { | |
| CORE_ADDR addr = bp_tgt->placed_address; | |
| const unsigned char *bp; | |
| int val; | |
| int bplen; | |
| gdb_byte old_contents[BREAKPOINT_MAX]; | |
| struct cleanup *cleanup; | |
| /* Determine appropriate breakpoint contents and size for this address. */ | |
| bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); | |
| if (bp == NULL) | |
| error (_("Software breakpoints not implemented for this target.")); | |
| /* Make sure we see the memory breakpoints. */ | |
| cleanup = make_show_memory_breakpoints_cleanup (1); | |
| val = target_read_memory (addr, old_contents, bplen); | |
| /* If our breakpoint is no longer at the address, this means that the | |
| program modified the code on us, so it is wrong to put back the | |
| old value */ | |
| if (val == 0 && memcmp (bp, old_contents, bplen) == 0) | |
| val = target_write_memory (addr, bp_tgt->shadow_contents, bplen); | |
| do_cleanups (cleanup); | |
| return val; | |
| } | |
| /* For historic reasons, PPC 32 GNU/Linux follows PowerOpen rather | |
| than the 32 bit SYSV R4 ABI structure return convention - all | |
| structures, no matter their size, are put in memory. Vectors, | |
| which were added later, do get returned in a register though. */ | |
| static enum return_value_convention | |
| ppc_linux_return_value (struct gdbarch *gdbarch, struct type *func_type, | |
| struct type *valtype, struct regcache *regcache, | |
| gdb_byte *readbuf, const gdb_byte *writebuf) | |
| { | |
| if ((TYPE_CODE (valtype) == TYPE_CODE_STRUCT | |
| || TYPE_CODE (valtype) == TYPE_CODE_UNION) | |
| && !((TYPE_LENGTH (valtype) == 16 || TYPE_LENGTH (valtype) == 8) | |
| && TYPE_VECTOR (valtype))) | |
| return RETURN_VALUE_STRUCT_CONVENTION; | |
| else | |
| return ppc_sysv_abi_return_value (gdbarch, func_type, valtype, regcache, | |
| readbuf, writebuf); | |
| } | |
| /* Macros for matching instructions. Note that, since all the | |
| operands are masked off before they're or-ed into the instruction, | |
| you can use -1 to make masks. */ | |
| #define insn_d(opcd, rts, ra, d) \ | |
| ((((opcd) & 0x3f) << 26) \ | |
| | (((rts) & 0x1f) << 21) \ | |
| | (((ra) & 0x1f) << 16) \ | |
| | ((d) & 0xffff)) | |
| #define insn_ds(opcd, rts, ra, d, xo) \ | |
| ((((opcd) & 0x3f) << 26) \ | |
| | (((rts) & 0x1f) << 21) \ | |
| | (((ra) & 0x1f) << 16) \ | |
| | ((d) & 0xfffc) \ | |
| | ((xo) & 0x3)) | |
| #define insn_xfx(opcd, rts, spr, xo) \ | |
| ((((opcd) & 0x3f) << 26) \ | |
| | (((rts) & 0x1f) << 21) \ | |
| | (((spr) & 0x1f) << 16) \ | |
| | (((spr) & 0x3e0) << 6) \ | |
| | (((xo) & 0x3ff) << 1)) | |
| /* Read a PPC instruction from memory. PPC instructions are always | |
| big-endian, no matter what endianness the program is running in, so | |
| we can't use read_memory_integer or one of its friends here. */ | |
| static unsigned int | |
| read_insn (CORE_ADDR pc) | |
| { | |
| unsigned char buf[4]; | |
| read_memory (pc, buf, 4); | |
| return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; | |
| } | |
| /* An instruction to match. */ | |
| struct insn_pattern | |
| { | |
| unsigned int mask; /* mask the insn with this... */ | |
| unsigned int data; /* ...and see if it matches this. */ | |
| int optional; /* If non-zero, this insn may be absent. */ | |
| }; | |
| /* Return non-zero if the instructions at PC match the series | |
| described in PATTERN, or zero otherwise. PATTERN is an array of | |
| 'struct insn_pattern' objects, terminated by an entry whose mask is | |
| zero. | |
| When the match is successful, fill INSN[i] with what PATTERN[i] | |
| matched. If PATTERN[i] is optional, and the instruction wasn't | |
| present, set INSN[i] to 0 (which is not a valid PPC instruction). | |
| INSN should have as many elements as PATTERN. Note that, if | |
| PATTERN contains optional instructions which aren't present in | |
| memory, then INSN will have holes, so INSN[i] isn't necessarily the | |
| i'th instruction in memory. */ | |
| static int | |
| insns_match_pattern (CORE_ADDR pc, | |
| struct insn_pattern *pattern, | |
| unsigned int *insn) | |
| { | |
| int i; | |
| for (i = 0; pattern[i].mask; i++) | |
| { | |
| insn[i] = read_insn (pc); | |
| if ((insn[i] & pattern[i].mask) == pattern[i].data) | |
| pc += 4; | |
| else if (pattern[i].optional) | |
| insn[i] = 0; | |
| else | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* Return the 'd' field of the d-form instruction INSN, properly | |
| sign-extended. */ | |
| static CORE_ADDR | |
| insn_d_field (unsigned int insn) | |
| { | |
| return ((((CORE_ADDR) insn & 0xffff) ^ 0x8000) - 0x8000); | |
| } | |
| /* Return the 'ds' field of the ds-form instruction INSN, with the two | |
| zero bits concatenated at the right, and properly | |
| sign-extended. */ | |
| static CORE_ADDR | |
| insn_ds_field (unsigned int insn) | |
| { | |
| return ((((CORE_ADDR) insn & 0xfffc) ^ 0x8000) - 0x8000); | |
| } | |
| /* If DESC is the address of a 64-bit PowerPC GNU/Linux function | |
| descriptor, return the descriptor's entry point. */ | |
| static CORE_ADDR | |
| ppc64_desc_entry_point (CORE_ADDR desc) | |
| { | |
| /* The first word of the descriptor is the entry point. */ | |
| return (CORE_ADDR) read_memory_unsigned_integer (desc, 8); | |
| } | |
| /* Pattern for the standard linkage function. These are built by | |
| build_plt_stub in elf64-ppc.c, whose GLINK argument is always | |
| zero. */ | |
| static struct insn_pattern ppc64_standard_linkage1[] = | |
| { | |
| /* addis r12, r2, <any> */ | |
| { insn_d (-1, -1, -1, 0), insn_d (15, 12, 2, 0), 0 }, | |
| /* std r2, 40(r1) */ | |
| { -1, insn_ds (62, 2, 1, 40, 0), 0 }, | |
| /* ld r11, <any>(r12) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 }, | |
| /* addis r12, r12, 1 <optional> */ | |
| { insn_d (-1, -1, -1, -1), insn_d (15, 12, 12, 1), 1 }, | |
| /* ld r2, <any>(r12) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 12, 0, 0), 0 }, | |
| /* addis r12, r12, 1 <optional> */ | |
| { insn_d (-1, -1, -1, -1), insn_d (15, 12, 12, 1), 1 }, | |
| /* mtctr r11 */ | |
| { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), 0 }, | |
| /* ld r11, <any>(r12) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 }, | |
| /* bctr */ | |
| { -1, 0x4e800420, 0 }, | |
| { 0, 0, 0 } | |
| }; | |
| #define PPC64_STANDARD_LINKAGE1_LEN \ | |
| (sizeof (ppc64_standard_linkage1) / sizeof (ppc64_standard_linkage1[0])) | |
| static struct insn_pattern ppc64_standard_linkage2[] = | |
| { | |
| /* addis r12, r2, <any> */ | |
| { insn_d (-1, -1, -1, 0), insn_d (15, 12, 2, 0), 0 }, | |
| /* std r2, 40(r1) */ | |
| { -1, insn_ds (62, 2, 1, 40, 0), 0 }, | |
| /* ld r11, <any>(r12) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 }, | |
| /* addi r12, r12, <any> <optional> */ | |
| { insn_d (-1, -1, -1, 0), insn_d (14, 12, 12, 0), 1 }, | |
| /* mtctr r11 */ | |
| { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), 0 }, | |
| /* ld r2, <any>(r12) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 12, 0, 0), 0 }, | |
| /* ld r11, <any>(r12) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 }, | |
| /* bctr */ | |
| { -1, 0x4e800420, 0 }, | |
| { 0, 0, 0 } | |
| }; | |
| #define PPC64_STANDARD_LINKAGE2_LEN \ | |
| (sizeof (ppc64_standard_linkage2) / sizeof (ppc64_standard_linkage2[0])) | |
| static struct insn_pattern ppc64_standard_linkage3[] = | |
| { | |
| /* std r2, 40(r1) */ | |
| { -1, insn_ds (62, 2, 1, 40, 0), 0 }, | |
| /* ld r11, <any>(r2) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 2, 0, 0), 0 }, | |
| /* addi r2, r2, <any> <optional> */ | |
| { insn_d (-1, -1, -1, 0), insn_d (14, 2, 2, 0), 1 }, | |
| /* mtctr r11 */ | |
| { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), 0 }, | |
| /* ld r11, <any>(r2) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 2, 0, 0), 0 }, | |
| /* ld r2, <any>(r2) */ | |
| { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 2, 0, 0), 0 }, | |
| /* bctr */ | |
| { -1, 0x4e800420, 0 }, | |
| { 0, 0, 0 } | |
| }; | |
| #define PPC64_STANDARD_LINKAGE3_LEN \ | |
| (sizeof (ppc64_standard_linkage3) / sizeof (ppc64_standard_linkage3[0])) | |
| /* When the dynamic linker is doing lazy symbol resolution, the first | |
| call to a function in another object will go like this: | |
| - The user's function calls the linkage function: | |
| 100007c4: 4b ff fc d5 bl 10000498 | |
| 100007c8: e8 41 00 28 ld r2,40(r1) | |
| - The linkage function loads the entry point (and other stuff) from | |
| the function descriptor in the PLT, and jumps to it: | |
| 10000498: 3d 82 00 00 addis r12,r2,0 | |
| 1000049c: f8 41 00 28 std r2,40(r1) | |
| 100004a0: e9 6c 80 98 ld r11,-32616(r12) | |
| 100004a4: e8 4c 80 a0 ld r2,-32608(r12) | |
| 100004a8: 7d 69 03 a6 mtctr r11 | |
| 100004ac: e9 6c 80 a8 ld r11,-32600(r12) | |
| 100004b0: 4e 80 04 20 bctr | |
| - But since this is the first time that PLT entry has been used, it | |
| sends control to its glink entry. That loads the number of the | |
| PLT entry and jumps to the common glink0 code: | |
| 10000c98: 38 00 00 00 li r0,0 | |
| 10000c9c: 4b ff ff dc b 10000c78 | |
| - The common glink0 code then transfers control to the dynamic | |
| linker's fixup code: | |
| 10000c78: e8 41 00 28 ld r2,40(r1) | |
| 10000c7c: 3d 82 00 00 addis r12,r2,0 | |
| 10000c80: e9 6c 80 80 ld r11,-32640(r12) | |
| 10000c84: e8 4c 80 88 ld r2,-32632(r12) | |
| 10000c88: 7d 69 03 a6 mtctr r11 | |
| 10000c8c: e9 6c 80 90 ld r11,-32624(r12) | |
| 10000c90: 4e 80 04 20 bctr | |
| Eventually, this code will figure out how to skip all of this, | |
| including the dynamic linker. At the moment, we just get through | |
| the linkage function. */ | |
| /* If the current thread is about to execute a series of instructions | |
| at PC matching the ppc64_standard_linkage pattern, and INSN is the result | |
| from that pattern match, return the code address to which the | |
| standard linkage function will send them. (This doesn't deal with | |
| dynamic linker lazy symbol resolution stubs.) */ | |
| static CORE_ADDR | |
| ppc64_standard_linkage1_target (struct frame_info *frame, | |
| CORE_ADDR pc, unsigned int *insn) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame)); | |
| /* The address of the function descriptor this linkage function | |
| references. */ | |
| CORE_ADDR desc | |
| = ((CORE_ADDR) get_frame_register_unsigned (frame, | |
| tdep->ppc_gp0_regnum + 2) | |
| + (insn_d_field (insn[0]) << 16) | |
| + insn_ds_field (insn[2])); | |
| /* The first word of the descriptor is the entry point. Return that. */ | |
| return ppc64_desc_entry_point (desc); | |
| } | |
| static struct core_regset_section ppc_linux_regset_sections[] = | |
| { | |
| { ".reg", 268 }, | |
| { ".reg2", 264 }, | |
| { ".reg-ppc-vmx", 544 }, | |
| { NULL, 0} | |
| }; | |
| static CORE_ADDR | |
| ppc64_standard_linkage2_target (struct frame_info *frame, | |
| CORE_ADDR pc, unsigned int *insn) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame)); | |
| /* The address of the function descriptor this linkage function | |
| references. */ | |
| CORE_ADDR desc | |
| = ((CORE_ADDR) get_frame_register_unsigned (frame, | |
| tdep->ppc_gp0_regnum + 2) | |
| + (insn_d_field (insn[0]) << 16) | |
| + insn_ds_field (insn[2])); | |
| /* The first word of the descriptor is the entry point. Return that. */ | |
| return ppc64_desc_entry_point (desc); | |
| } | |
| static CORE_ADDR | |
| ppc64_standard_linkage3_target (struct frame_info *frame, | |
| CORE_ADDR pc, unsigned int *insn) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame)); | |
| /* The address of the function descriptor this linkage function | |
| references. */ | |
| CORE_ADDR desc | |
| = ((CORE_ADDR) get_frame_register_unsigned (frame, | |
| tdep->ppc_gp0_regnum + 2) | |
| + insn_ds_field (insn[1])); | |
| /* The first word of the descriptor is the entry point. Return that. */ | |
| return ppc64_desc_entry_point (desc); | |
| } | |
| /* Given that we've begun executing a call trampoline at PC, return | |
| the entry point of the function the trampoline will go to. */ | |
| static CORE_ADDR | |
| ppc64_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc) | |
| { | |
| unsigned int ppc64_standard_linkage1_insn[PPC64_STANDARD_LINKAGE1_LEN]; | |
| unsigned int ppc64_standard_linkage2_insn[PPC64_STANDARD_LINKAGE2_LEN]; | |
| unsigned int ppc64_standard_linkage3_insn[PPC64_STANDARD_LINKAGE3_LEN]; | |
| CORE_ADDR target; | |
| if (insns_match_pattern (pc, ppc64_standard_linkage1, | |
| ppc64_standard_linkage1_insn)) | |
| pc = ppc64_standard_linkage1_target (frame, pc, | |
| ppc64_standard_linkage1_insn); | |
| else if (insns_match_pattern (pc, ppc64_standard_linkage2, | |
| ppc64_standard_linkage2_insn)) | |
| pc = ppc64_standard_linkage2_target (frame, pc, | |
| ppc64_standard_linkage2_insn); | |
| else if (insns_match_pattern (pc, ppc64_standard_linkage3, | |
| ppc64_standard_linkage3_insn)) | |
| pc = ppc64_standard_linkage3_target (frame, pc, | |
| ppc64_standard_linkage3_insn); | |
| else | |
| return 0; | |
| /* The PLT descriptor will either point to the already resolved target | |
| address, or else to a glink stub. As the latter carry synthetic @plt | |
| symbols, find_solib_trampoline_target should be able to resolve them. */ | |
| target = find_solib_trampoline_target (frame, pc); | |
| return target? target : pc; | |
| } | |
| /* Support for convert_from_func_ptr_addr (ARCH, ADDR, TARG) on PPC64 | |
| GNU/Linux. | |
| Usually a function pointer's representation is simply the address | |
| of the function. On GNU/Linux on the PowerPC however, a function | |
| pointer may be a pointer to a function descriptor. | |
| For PPC64, a function descriptor is a TOC entry, in a data section, | |
| which contains three words: the first word is the address of the | |
| function, the second word is the TOC pointer (r2), and the third word | |
| is the static chain value. | |
| Throughout GDB it is currently assumed that a function pointer contains | |
| the address of the function, which is not easy to fix. In addition, the | |
| conversion of a function address to a function pointer would | |
| require allocation of a TOC entry in the inferior's memory space, | |
| with all its drawbacks. To be able to call C++ virtual methods in | |
| the inferior (which are called via function pointers), | |
| find_function_addr uses this function to get the function address | |
| from a function pointer. | |
| If ADDR points at what is clearly a function descriptor, transform | |
| it into the address of the corresponding function, if needed. Be | |
| conservative, otherwise GDB will do the transformation on any | |
| random addresses such as occur when there is no symbol table. */ | |
| static CORE_ADDR | |
| ppc64_linux_convert_from_func_ptr_addr (struct gdbarch *gdbarch, | |
| CORE_ADDR addr, | |
| struct target_ops *targ) | |
| { | |
| struct section_table *s = target_section_by_addr (targ, addr); | |
| /* Check if ADDR points to a function descriptor. */ | |
| if (s && strcmp (s->the_bfd_section->name, ".opd") == 0) | |
| return get_target_memory_unsigned (targ, addr, 8); | |
| return addr; | |
| } | |
| /* Wrappers to handle Linux-only registers. */ | |
| static void | |
| ppc_linux_supply_gregset (const struct regset *regset, | |
| struct regcache *regcache, | |
| int regnum, const void *gregs, size_t len) | |
| { | |
| const struct ppc_reg_offsets *offsets = regset->descr; | |
| ppc_supply_gregset (regset, regcache, regnum, gregs, len); | |
| if (ppc_linux_trap_reg_p (get_regcache_arch (regcache))) | |
| { | |
| /* "orig_r3" is stored 2 slots after "pc". */ | |
| if (regnum == -1 || regnum == PPC_ORIG_R3_REGNUM) | |
| ppc_supply_reg (regcache, PPC_ORIG_R3_REGNUM, gregs, | |
| offsets->pc_offset + 2 * offsets->gpr_size, | |
| offsets->gpr_size); | |
| /* "trap" is stored 8 slots after "pc". */ | |
| if (regnum == -1 || regnum == PPC_TRAP_REGNUM) | |
| ppc_supply_reg (regcache, PPC_TRAP_REGNUM, gregs, | |
| offsets->pc_offset + 8 * offsets->gpr_size, | |
| offsets->gpr_size); | |
| } | |
| } | |
| static void | |
| ppc_linux_collect_gregset (const struct regset *regset, | |
| const struct regcache *regcache, | |
| int regnum, void *gregs, size_t len) | |
| { | |
| const struct ppc_reg_offsets *offsets = regset->descr; | |
| /* Clear areas in the linux gregset not written elsewhere. */ | |
| if (regnum == -1) | |
| memset (gregs, 0, len); | |
| ppc_collect_gregset (regset, regcache, regnum, gregs, len); | |
| if (ppc_linux_trap_reg_p (get_regcache_arch (regcache))) | |
| { | |
| /* "orig_r3" is stored 2 slots after "pc". */ | |
| if (regnum == -1 || regnum == PPC_ORIG_R3_REGNUM) | |
| ppc_collect_reg (regcache, PPC_ORIG_R3_REGNUM, gregs, | |
| offsets->pc_offset + 2 * offsets->gpr_size, | |
| offsets->gpr_size); | |
| /* "trap" is stored 8 slots after "pc". */ | |
| if (regnum == -1 || regnum == PPC_TRAP_REGNUM) | |
| ppc_collect_reg (regcache, PPC_TRAP_REGNUM, gregs, | |
| offsets->pc_offset + 8 * offsets->gpr_size, | |
| offsets->gpr_size); | |
| } | |
| } | |
| /* Regset descriptions. */ | |
| static const struct ppc_reg_offsets ppc32_linux_reg_offsets = | |
| { | |
| /* General-purpose registers. */ | |
| /* .r0_offset = */ 0, | |
| /* .gpr_size = */ 4, | |
| /* .xr_size = */ 4, | |
| /* .pc_offset = */ 128, | |
| /* .ps_offset = */ 132, | |
| /* .cr_offset = */ 152, | |
| /* .lr_offset = */ 144, | |
| /* .ctr_offset = */ 140, | |
| /* .xer_offset = */ 148, | |
| /* .mq_offset = */ 156, | |
| /* Floating-point registers. */ | |
| /* .f0_offset = */ 0, | |
| /* .fpscr_offset = */ 256, | |
| /* .fpscr_size = */ 8, | |
| /* AltiVec registers. */ | |
| /* .vr0_offset = */ 0, | |
| /* .vscr_offset = */ 512 + 12, | |
| /* .vrsave_offset = */ 528 | |
| }; | |
| static const struct ppc_reg_offsets ppc64_linux_reg_offsets = | |
| { | |
| /* General-purpose registers. */ | |
| /* .r0_offset = */ 0, | |
| /* .gpr_size = */ 8, | |
| /* .xr_size = */ 8, | |
| /* .pc_offset = */ 256, | |
| /* .ps_offset = */ 264, | |
| /* .cr_offset = */ 304, | |
| /* .lr_offset = */ 288, | |
| /* .ctr_offset = */ 280, | |
| /* .xer_offset = */ 296, | |
| /* .mq_offset = */ 312, | |
| /* Floating-point registers. */ | |
| /* .f0_offset = */ 0, | |
| /* .fpscr_offset = */ 256, | |
| /* .fpscr_size = */ 8, | |
| /* AltiVec registers. */ | |
| /* .vr0_offset = */ 0, | |
| /* .vscr_offset = */ 512 + 12, | |
| /* .vrsave_offset = */ 528 | |
| }; | |
| static const struct regset ppc32_linux_gregset = { | |
| &ppc32_linux_reg_offsets, | |
| ppc_linux_supply_gregset, | |
| ppc_linux_collect_gregset, | |
| NULL | |
| }; | |
| static const struct regset ppc64_linux_gregset = { | |
| &ppc64_linux_reg_offsets, | |
| ppc_linux_supply_gregset, | |
| ppc_linux_collect_gregset, | |
| NULL | |
| }; | |
| static const struct regset ppc32_linux_fpregset = { | |
| &ppc32_linux_reg_offsets, | |
| ppc_supply_fpregset, | |
| ppc_collect_fpregset, | |
| NULL | |
| }; | |
| static const struct regset ppc32_linux_vrregset = { | |
| &ppc32_linux_reg_offsets, | |
| ppc_supply_vrregset, | |
| ppc_collect_vrregset, | |
| NULL | |
| }; | |
| const struct regset * | |
| ppc_linux_gregset (int wordsize) | |
| { | |
| return wordsize == 8 ? &ppc64_linux_gregset : &ppc32_linux_gregset; | |
| } | |
| const struct regset * | |
| ppc_linux_fpregset (void) | |
| { | |
| return &ppc32_linux_fpregset; | |
| } | |
| static const struct regset * | |
| ppc_linux_regset_from_core_section (struct gdbarch *core_arch, | |
| const char *sect_name, size_t sect_size) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (core_arch); | |
| if (strcmp (sect_name, ".reg") == 0) | |
| { | |
| if (tdep->wordsize == 4) | |
| return &ppc32_linux_gregset; | |
| else | |
| return &ppc64_linux_gregset; | |
| } | |
| if (strcmp (sect_name, ".reg2") == 0) | |
| return &ppc32_linux_fpregset; | |
| if (strcmp (sect_name, ".reg-ppc-vmx") == 0) | |
| return &ppc32_linux_vrregset; | |
| return NULL; | |
| } | |
| static void | |
| ppc_linux_sigtramp_cache (struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func, LONGEST offset, | |
| int bias) | |
| { | |
| CORE_ADDR base; | |
| CORE_ADDR regs; | |
| CORE_ADDR gpregs; | |
| CORE_ADDR fpregs; | |
| int i; | |
| struct gdbarch *gdbarch = get_frame_arch (this_frame); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| base = get_frame_register_unsigned (this_frame, | |
| gdbarch_sp_regnum (gdbarch)); | |
| if (bias > 0 && get_frame_pc (this_frame) != func) | |
| /* See below, some signal trampolines increment the stack as their | |
| first instruction, need to compensate for that. */ | |
| base -= bias; | |
| /* Find the address of the register buffer pointer. */ | |
| regs = base + offset; | |
| /* Use that to find the address of the corresponding register | |
| buffers. */ | |
| gpregs = read_memory_unsigned_integer (regs, tdep->wordsize); | |
| fpregs = gpregs + 48 * tdep->wordsize; | |
| /* General purpose. */ | |
| for (i = 0; i < 32; i++) | |
| { | |
| int regnum = i + tdep->ppc_gp0_regnum; | |
| trad_frame_set_reg_addr (this_cache, regnum, gpregs + i * tdep->wordsize); | |
| } | |
| trad_frame_set_reg_addr (this_cache, | |
| gdbarch_pc_regnum (gdbarch), | |
| gpregs + 32 * tdep->wordsize); | |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_ctr_regnum, | |
| gpregs + 35 * tdep->wordsize); | |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_lr_regnum, | |
| gpregs + 36 * tdep->wordsize); | |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_xer_regnum, | |
| gpregs + 37 * tdep->wordsize); | |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_cr_regnum, | |
| gpregs + 38 * tdep->wordsize); | |
| if (ppc_linux_trap_reg_p (gdbarch)) | |
| { | |
| trad_frame_set_reg_addr (this_cache, PPC_ORIG_R3_REGNUM, | |
| gpregs + 34 * tdep->wordsize); | |
| trad_frame_set_reg_addr (this_cache, PPC_TRAP_REGNUM, | |
| gpregs + 40 * tdep->wordsize); | |
| } | |
| if (ppc_floating_point_unit_p (gdbarch)) | |
| { | |
| /* Floating point registers. */ | |
| for (i = 0; i < 32; i++) | |
| { | |
| int regnum = i + gdbarch_fp0_regnum (gdbarch); | |
| trad_frame_set_reg_addr (this_cache, regnum, | |
| fpregs + i * tdep->wordsize); | |
| } | |
| trad_frame_set_reg_addr (this_cache, tdep->ppc_fpscr_regnum, | |
| fpregs + 32 * tdep->wordsize); | |
| } | |
| trad_frame_set_id (this_cache, frame_id_build (base, func)); | |
| } | |
| static void | |
| ppc32_linux_sigaction_cache_init (const struct tramp_frame *self, | |
| struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func) | |
| { | |
| ppc_linux_sigtramp_cache (this_frame, this_cache, func, | |
| 0xd0 /* Offset to ucontext_t. */ | |
| + 0x30 /* Offset to .reg. */, | |
| 0); | |
| } | |
| static void | |
| ppc64_linux_sigaction_cache_init (const struct tramp_frame *self, | |
| struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func) | |
| { | |
| ppc_linux_sigtramp_cache (this_frame, this_cache, func, | |
| 0x80 /* Offset to ucontext_t. */ | |
| + 0xe0 /* Offset to .reg. */, | |
| 128); | |
| } | |
| static void | |
| ppc32_linux_sighandler_cache_init (const struct tramp_frame *self, | |
| struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func) | |
| { | |
| ppc_linux_sigtramp_cache (this_frame, this_cache, func, | |
| 0x40 /* Offset to ucontext_t. */ | |
| + 0x1c /* Offset to .reg. */, | |
| 0); | |
| } | |
| static void | |
| ppc64_linux_sighandler_cache_init (const struct tramp_frame *self, | |
| struct frame_info *this_frame, | |
| struct trad_frame_cache *this_cache, | |
| CORE_ADDR func) | |
| { | |
| ppc_linux_sigtramp_cache (this_frame, this_cache, func, | |
| 0x80 /* Offset to struct sigcontext. */ | |
| + 0x38 /* Offset to .reg. */, | |
| 128); | |
| } | |
| static struct tramp_frame ppc32_linux_sigaction_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { 0x380000ac, -1 }, /* li r0, 172 */ | |
| { 0x44000002, -1 }, /* sc */ | |
| { TRAMP_SENTINEL_INSN }, | |
| }, | |
| ppc32_linux_sigaction_cache_init | |
| }; | |
| static struct tramp_frame ppc64_linux_sigaction_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { 0x38210080, -1 }, /* addi r1,r1,128 */ | |
| { 0x380000ac, -1 }, /* li r0, 172 */ | |
| { 0x44000002, -1 }, /* sc */ | |
| { TRAMP_SENTINEL_INSN }, | |
| }, | |
| ppc64_linux_sigaction_cache_init | |
| }; | |
| static struct tramp_frame ppc32_linux_sighandler_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { 0x38000077, -1 }, /* li r0,119 */ | |
| { 0x44000002, -1 }, /* sc */ | |
| { TRAMP_SENTINEL_INSN }, | |
| }, | |
| ppc32_linux_sighandler_cache_init | |
| }; | |
| static struct tramp_frame ppc64_linux_sighandler_tramp_frame = { | |
| SIGTRAMP_FRAME, | |
| 4, | |
| { | |
| { 0x38210080, -1 }, /* addi r1,r1,128 */ | |
| { 0x38000077, -1 }, /* li r0,119 */ | |
| { 0x44000002, -1 }, /* sc */ | |
| { TRAMP_SENTINEL_INSN }, | |
| }, | |
| ppc64_linux_sighandler_cache_init | |
| }; | |
| /* Return 1 if PPC_ORIG_R3_REGNUM and PPC_TRAP_REGNUM are usable. */ | |
| int | |
| ppc_linux_trap_reg_p (struct gdbarch *gdbarch) | |
| { | |
| /* If we do not have a target description with registers, then | |
| the special registers will not be included in the register set. */ | |
| if (!tdesc_has_registers (gdbarch_target_desc (gdbarch))) | |
| return 0; | |
| /* If we do, then it is safe to check the size. */ | |
| return register_size (gdbarch, PPC_ORIG_R3_REGNUM) > 0 | |
| && register_size (gdbarch, PPC_TRAP_REGNUM) > 0; | |
| } | |
| static void | |
| ppc_linux_write_pc (struct regcache *regcache, CORE_ADDR pc) | |
| { | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| regcache_cooked_write_unsigned (regcache, gdbarch_pc_regnum (gdbarch), pc); | |
| /* Set special TRAP register to -1 to prevent the kernel from | |
| messing with the PC we just installed, if we happen to be | |
| within an interrupted system call that the kernel wants to | |
| restart. | |
| Note that after we return from the dummy call, the TRAP and | |
| ORIG_R3 registers will be automatically restored, and the | |
| kernel continues to restart the system call at this point. */ | |
| if (ppc_linux_trap_reg_p (gdbarch)) | |
| regcache_cooked_write_unsigned (regcache, PPC_TRAP_REGNUM, -1); | |
| } | |
| static const struct target_desc * | |
| ppc_linux_core_read_description (struct gdbarch *gdbarch, | |
| struct target_ops *target, | |
| bfd *abfd) | |
| { | |
| asection *altivec = bfd_get_section_by_name (abfd, ".reg-ppc-vmx"); | |
| asection *section = bfd_get_section_by_name (abfd, ".reg"); | |
| if (! section) | |
| return NULL; | |
| switch (bfd_section_size (abfd, section)) | |
| { | |
| case 48 * 4: | |
| return altivec? tdesc_powerpc_altivec32l : tdesc_powerpc_32l; | |
| case 48 * 8: | |
| return altivec? tdesc_powerpc_altivec64l : tdesc_powerpc_64l; | |
| default: | |
| return NULL; | |
| } | |
| } | |
| static void | |
| ppc_linux_init_abi (struct gdbarch_info info, | |
| struct gdbarch *gdbarch) | |
| { | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| struct tdesc_arch_data *tdesc_data = (void *) info.tdep_info; | |
| /* PPC GNU/Linux uses either 64-bit or 128-bit long doubles; where | |
| 128-bit, they are IBM long double, not IEEE quad long double as | |
| in the System V ABI PowerPC Processor Supplement. We can safely | |
| let them default to 128-bit, since the debug info will give the | |
| size of type actually used in each case. */ | |
| set_gdbarch_long_double_bit (gdbarch, 16 * TARGET_CHAR_BIT); | |
| set_gdbarch_long_double_format (gdbarch, floatformats_ibm_long_double); | |
| /* Handle inferior calls during interrupted system calls. */ | |
| set_gdbarch_write_pc (gdbarch, ppc_linux_write_pc); | |
| if (tdep->wordsize == 4) | |
| { | |
| /* Until November 2001, gcc did not comply with the 32 bit SysV | |
| R4 ABI requirement that structures less than or equal to 8 | |
| bytes should be returned in registers. Instead GCC was using | |
| the the AIX/PowerOpen ABI - everything returned in memory | |
| (well ignoring vectors that is). When this was corrected, it | |
| wasn't fixed for GNU/Linux native platform. Use the | |
| PowerOpen struct convention. */ | |
| set_gdbarch_return_value (gdbarch, ppc_linux_return_value); | |
| set_gdbarch_memory_remove_breakpoint (gdbarch, | |
| ppc_linux_memory_remove_breakpoint); | |
| /* Shared library handling. */ | |
| set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); | |
| set_solib_svr4_fetch_link_map_offsets | |
| (gdbarch, svr4_ilp32_fetch_link_map_offsets); | |
| /* Trampolines. */ | |
| tramp_frame_prepend_unwinder (gdbarch, &ppc32_linux_sigaction_tramp_frame); | |
| tramp_frame_prepend_unwinder (gdbarch, &ppc32_linux_sighandler_tramp_frame); | |
| } | |
| if (tdep->wordsize == 8) | |
| { | |
| /* Handle PPC GNU/Linux 64-bit function pointers (which are really | |
| function descriptors). */ | |
| set_gdbarch_convert_from_func_ptr_addr | |
| (gdbarch, ppc64_linux_convert_from_func_ptr_addr); | |
| /* Shared library handling. */ | |
| set_gdbarch_skip_trampoline_code (gdbarch, ppc64_skip_trampoline_code); | |
| set_solib_svr4_fetch_link_map_offsets | |
| (gdbarch, svr4_lp64_fetch_link_map_offsets); | |
| /* Trampolines. */ | |
| tramp_frame_prepend_unwinder (gdbarch, &ppc64_linux_sigaction_tramp_frame); | |
| tramp_frame_prepend_unwinder (gdbarch, &ppc64_linux_sighandler_tramp_frame); | |
| } | |
| set_gdbarch_regset_from_core_section (gdbarch, ppc_linux_regset_from_core_section); | |
| set_gdbarch_core_read_description (gdbarch, ppc_linux_core_read_description); | |
| /* Supported register sections. */ | |
| set_gdbarch_core_regset_sections (gdbarch, ppc_linux_regset_sections); | |
| /* Enable TLS support. */ | |
| set_gdbarch_fetch_tls_load_module_address (gdbarch, | |
| svr4_fetch_objfile_link_map); | |
| if (tdesc_data) | |
| { | |
| const struct tdesc_feature *feature; | |
| /* If we have target-described registers, then we can safely | |
| reserve a number for PPC_ORIG_R3_REGNUM and PPC_TRAP_REGNUM | |
| (whether they are described or not). */ | |
| gdb_assert (gdbarch_num_regs (gdbarch) <= PPC_ORIG_R3_REGNUM); | |
| set_gdbarch_num_regs (gdbarch, PPC_TRAP_REGNUM + 1); | |
| /* If they are present, then assign them to the reserved number. */ | |
| feature = tdesc_find_feature (info.target_desc, | |
| "org.gnu.gdb.power.linux"); | |
| if (feature != NULL) | |
| { | |
| tdesc_numbered_register (feature, tdesc_data, | |
| PPC_ORIG_R3_REGNUM, "orig_r3"); | |
| tdesc_numbered_register (feature, tdesc_data, | |
| PPC_TRAP_REGNUM, "trap"); | |
| } | |
| } | |
| } | |
| void | |
| _initialize_ppc_linux_tdep (void) | |
| { | |
| /* Register for all sub-familes of the POWER/PowerPC: 32-bit and | |
| 64-bit PowerPC, and the older rs6k. */ | |
| gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc, GDB_OSABI_LINUX, | |
| ppc_linux_init_abi); | |
| gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc64, GDB_OSABI_LINUX, | |
| ppc_linux_init_abi); | |
| gdbarch_register_osabi (bfd_arch_rs6000, bfd_mach_rs6k, GDB_OSABI_LINUX, | |
| ppc_linux_init_abi); | |
| /* Initialize the Linux target descriptions. */ | |
| initialize_tdesc_powerpc_32l (); | |
| initialize_tdesc_powerpc_altivec32l (); | |
| initialize_tdesc_powerpc_64l (); | |
| initialize_tdesc_powerpc_altivec64l (); | |
| initialize_tdesc_powerpc_e500l (); | |
| } |