| /* Interface between GDB and target environments, including files and processes | |
| Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, | |
| 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| Contributed by Cygnus Support. Written by John Gilmore. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #if !defined (TARGET_H) | |
| #define TARGET_H | |
| struct objfile; | |
| struct ui_file; | |
| struct mem_attrib; | |
| struct target_ops; | |
| struct bp_target_info; | |
| struct regcache; | |
| /* This include file defines the interface between the main part | |
| of the debugger, and the part which is target-specific, or | |
| specific to the communications interface between us and the | |
| target. | |
| A TARGET is an interface between the debugger and a particular | |
| kind of file or process. Targets can be STACKED in STRATA, | |
| so that more than one target can potentially respond to a request. | |
| In particular, memory accesses will walk down the stack of targets | |
| until they find a target that is interested in handling that particular | |
| address. STRATA are artificial boundaries on the stack, within | |
| which particular kinds of targets live. Strata exist so that | |
| people don't get confused by pushing e.g. a process target and then | |
| a file target, and wondering why they can't see the current values | |
| of variables any more (the file target is handling them and they | |
| never get to the process target). So when you push a file target, | |
| it goes into the file stratum, which is always below the process | |
| stratum. */ | |
| #include "bfd.h" | |
| #include "symtab.h" | |
| #include "dcache.h" | |
| #include "memattr.h" | |
| #include "vec.h" | |
| enum strata | |
| { | |
| dummy_stratum, /* The lowest of the low */ | |
| file_stratum, /* Executable files, etc */ | |
| core_stratum, /* Core dump files */ | |
| process_stratum, /* Executing processes */ | |
| thread_stratum, /* Executing threads */ | |
| record_stratum /* Support record debugging */ | |
| }; | |
| enum thread_control_capabilities | |
| { | |
| tc_none = 0, /* Default: can't control thread execution. */ | |
| tc_schedlock = 1, /* Can lock the thread scheduler. */ | |
| }; | |
| /* Stuff for target_wait. */ | |
| /* Generally, what has the program done? */ | |
| enum target_waitkind | |
| { | |
| /* The program has exited. The exit status is in value.integer. */ | |
| TARGET_WAITKIND_EXITED, | |
| /* The program has stopped with a signal. Which signal is in | |
| value.sig. */ | |
| TARGET_WAITKIND_STOPPED, | |
| /* The program has terminated with a signal. Which signal is in | |
| value.sig. */ | |
| TARGET_WAITKIND_SIGNALLED, | |
| /* The program is letting us know that it dynamically loaded something | |
| (e.g. it called load(2) on AIX). */ | |
| TARGET_WAITKIND_LOADED, | |
| /* The program has forked. A "related" process' PTID is in | |
| value.related_pid. I.e., if the child forks, value.related_pid | |
| is the parent's ID. */ | |
| TARGET_WAITKIND_FORKED, | |
| /* The program has vforked. A "related" process's PTID is in | |
| value.related_pid. */ | |
| TARGET_WAITKIND_VFORKED, | |
| /* The program has exec'ed a new executable file. The new file's | |
| pathname is pointed to by value.execd_pathname. */ | |
| TARGET_WAITKIND_EXECD, | |
| /* The program has entered or returned from a system call. On | |
| HP-UX, this is used in the hardware watchpoint implementation. | |
| The syscall's unique integer ID number is in value.syscall_id */ | |
| TARGET_WAITKIND_SYSCALL_ENTRY, | |
| TARGET_WAITKIND_SYSCALL_RETURN, | |
| /* Nothing happened, but we stopped anyway. This perhaps should be handled | |
| within target_wait, but I'm not sure target_wait should be resuming the | |
| inferior. */ | |
| TARGET_WAITKIND_SPURIOUS, | |
| /* An event has occured, but we should wait again. | |
| Remote_async_wait() returns this when there is an event | |
| on the inferior, but the rest of the world is not interested in | |
| it. The inferior has not stopped, but has just sent some output | |
| to the console, for instance. In this case, we want to go back | |
| to the event loop and wait there for another event from the | |
| inferior, rather than being stuck in the remote_async_wait() | |
| function. This way the event loop is responsive to other events, | |
| like for instance the user typing. */ | |
| TARGET_WAITKIND_IGNORE, | |
| /* The target has run out of history information, | |
| and cannot run backward any further. */ | |
| TARGET_WAITKIND_NO_HISTORY | |
| }; | |
| struct target_waitstatus | |
| { | |
| enum target_waitkind kind; | |
| /* Forked child pid, execd pathname, exit status or signal number. */ | |
| union | |
| { | |
| int integer; | |
| enum target_signal sig; | |
| ptid_t related_pid; | |
| char *execd_pathname; | |
| int syscall_id; | |
| } | |
| value; | |
| }; | |
| /* Possible types of events that the inferior handler will have to | |
| deal with. */ | |
| enum inferior_event_type | |
| { | |
| /* There is a request to quit the inferior, abandon it. */ | |
| INF_QUIT_REQ, | |
| /* Process a normal inferior event which will result in target_wait | |
| being called. */ | |
| INF_REG_EVENT, | |
| /* Deal with an error on the inferior. */ | |
| INF_ERROR, | |
| /* We are called because a timer went off. */ | |
| INF_TIMER, | |
| /* We are called to do stuff after the inferior stops. */ | |
| INF_EXEC_COMPLETE, | |
| /* We are called to do some stuff after the inferior stops, but we | |
| are expected to reenter the proceed() and | |
| handle_inferior_event() functions. This is used only in case of | |
| 'step n' like commands. */ | |
| INF_EXEC_CONTINUE | |
| }; | |
| /* Return the string for a signal. */ | |
| extern char *target_signal_to_string (enum target_signal); | |
| /* Return the name (SIGHUP, etc.) for a signal. */ | |
| extern char *target_signal_to_name (enum target_signal); | |
| /* Given a name (SIGHUP, etc.), return its signal. */ | |
| enum target_signal target_signal_from_name (char *); | |
| /* Target objects which can be transfered using target_read, | |
| target_write, et cetera. */ | |
| enum target_object | |
| { | |
| /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */ | |
| TARGET_OBJECT_AVR, | |
| /* SPU target specific transfer. See "spu-tdep.c". */ | |
| TARGET_OBJECT_SPU, | |
| /* Transfer up-to LEN bytes of memory starting at OFFSET. */ | |
| TARGET_OBJECT_MEMORY, | |
| /* Memory, avoiding GDB's data cache and trusting the executable. | |
| Target implementations of to_xfer_partial never need to handle | |
| this object, and most callers should not use it. */ | |
| TARGET_OBJECT_RAW_MEMORY, | |
| /* Kernel Unwind Table. See "ia64-tdep.c". */ | |
| TARGET_OBJECT_UNWIND_TABLE, | |
| /* Transfer auxilliary vector. */ | |
| TARGET_OBJECT_AUXV, | |
| /* StackGhost cookie. See "sparc-tdep.c". */ | |
| TARGET_OBJECT_WCOOKIE, | |
| /* Target memory map in XML format. */ | |
| TARGET_OBJECT_MEMORY_MAP, | |
| /* Flash memory. This object can be used to write contents to | |
| a previously erased flash memory. Using it without erasing | |
| flash can have unexpected results. Addresses are physical | |
| address on target, and not relative to flash start. */ | |
| TARGET_OBJECT_FLASH, | |
| /* Available target-specific features, e.g. registers and coprocessors. | |
| See "target-descriptions.c". ANNEX should never be empty. */ | |
| TARGET_OBJECT_AVAILABLE_FEATURES, | |
| /* Currently loaded libraries, in XML format. */ | |
| TARGET_OBJECT_LIBRARIES | |
| /* Possible future objects: TARGET_OBJECT_FILE, TARGET_OBJECT_PROC, ... */ | |
| }; | |
| /* Request that OPS transfer up to LEN 8-bit bytes of the target's | |
| OBJECT. The OFFSET, for a seekable object, specifies the | |
| starting point. The ANNEX can be used to provide additional | |
| data-specific information to the target. | |
| Return the number of bytes actually transfered, or -1 if the | |
| transfer is not supported or otherwise fails. Return of a positive | |
| value less than LEN indicates that no further transfer is possible. | |
| Unlike the raw to_xfer_partial interface, callers of these | |
| functions do not need to retry partial transfers. */ | |
| extern LONGEST target_read (struct target_ops *ops, | |
| enum target_object object, | |
| const char *annex, gdb_byte *buf, | |
| ULONGEST offset, LONGEST len); | |
| extern LONGEST target_read_until_error (struct target_ops *ops, | |
| enum target_object object, | |
| const char *annex, gdb_byte *buf, | |
| ULONGEST offset, LONGEST len); | |
| extern LONGEST target_write (struct target_ops *ops, | |
| enum target_object object, | |
| const char *annex, const gdb_byte *buf, | |
| ULONGEST offset, LONGEST len); | |
| /* Similar to target_write, except that it also calls PROGRESS with | |
| the number of bytes written and the opaque BATON after every | |
| successful partial write (and before the first write). This is | |
| useful for progress reporting and user interaction while writing | |
| data. To abort the transfer, the progress callback can throw an | |
| exception. */ | |
| LONGEST target_write_with_progress (struct target_ops *ops, | |
| enum target_object object, | |
| const char *annex, const gdb_byte *buf, | |
| ULONGEST offset, LONGEST len, | |
| void (*progress) (ULONGEST, void *), | |
| void *baton); | |
| /* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will | |
| be read using OPS. The return value will be -1 if the transfer | |
| fails or is not supported; 0 if the object is empty; or the length | |
| of the object otherwise. If a positive value is returned, a | |
| sufficiently large buffer will be allocated using xmalloc and | |
| returned in *BUF_P containing the contents of the object. | |
| This method should be used for objects sufficiently small to store | |
| in a single xmalloc'd buffer, when no fixed bound on the object's | |
| size is known in advance. Don't try to read TARGET_OBJECT_MEMORY | |
| through this function. */ | |
| extern LONGEST target_read_alloc (struct target_ops *ops, | |
| enum target_object object, | |
| const char *annex, gdb_byte **buf_p); | |
| /* Read OBJECT/ANNEX using OPS. The result is NUL-terminated and | |
| returned as a string, allocated using xmalloc. If an error occurs | |
| or the transfer is unsupported, NULL is returned. Empty objects | |
| are returned as allocated but empty strings. A warning is issued | |
| if the result contains any embedded NUL bytes. */ | |
| extern char *target_read_stralloc (struct target_ops *ops, | |
| enum target_object object, | |
| const char *annex); | |
| /* Wrappers to target read/write that perform memory transfers. They | |
| throw an error if the memory transfer fails. | |
| NOTE: cagney/2003-10-23: The naming schema is lifted from | |
| "frame.h". The parameter order is lifted from get_frame_memory, | |
| which in turn lifted it from read_memory. */ | |
| extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr, | |
| gdb_byte *buf, LONGEST len); | |
| extern ULONGEST get_target_memory_unsigned (struct target_ops *ops, | |
| CORE_ADDR addr, int len); | |
| /* If certain kinds of activity happen, target_wait should perform | |
| callbacks. */ | |
| /* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible | |
| on TARGET_ACTIVITY_FD. */ | |
| extern int target_activity_fd; | |
| /* Returns zero to leave the inferior alone, one to interrupt it. */ | |
| extern int (*target_activity_function) (void); | |
| struct thread_info; /* fwd decl for parameter list below: */ | |
| struct target_ops | |
| { | |
| struct target_ops *beneath; /* To the target under this one. */ | |
| char *to_shortname; /* Name this target type */ | |
| char *to_longname; /* Name for printing */ | |
| char *to_doc; /* Documentation. Does not include trailing | |
| newline, and starts with a one-line descrip- | |
| tion (probably similar to to_longname). */ | |
| /* Per-target scratch pad. */ | |
| void *to_data; | |
| /* The open routine takes the rest of the parameters from the | |
| command, and (if successful) pushes a new target onto the | |
| stack. Targets should supply this routine, if only to provide | |
| an error message. */ | |
| void (*to_open) (char *, int); | |
| /* Old targets with a static target vector provide "to_close". | |
| New re-entrant targets provide "to_xclose" and that is expected | |
| to xfree everything (including the "struct target_ops"). */ | |
| void (*to_xclose) (struct target_ops *targ, int quitting); | |
| void (*to_close) (int); | |
| void (*to_attach) (char *, int); | |
| void (*to_post_attach) (int); | |
| void (*to_detach) (char *, int); | |
| void (*to_disconnect) (struct target_ops *, char *, int); | |
| void (*to_resume) (ptid_t, int, enum target_signal); | |
| ptid_t (*to_wait) (ptid_t, struct target_waitstatus *); | |
| void (*to_fetch_registers) (struct regcache *, int); | |
| void (*to_store_registers) (struct regcache *, int); | |
| void (*to_prepare_to_store) (struct regcache *); | |
| /* Transfer LEN bytes of memory between GDB address MYADDR and | |
| target address MEMADDR. If WRITE, transfer them to the target, else | |
| transfer them from the target. TARGET is the target from which we | |
| get this function. | |
| Return value, N, is one of the following: | |
| 0 means that we can't handle this. If errno has been set, it is the | |
| error which prevented us from doing it (FIXME: What about bfd_error?). | |
| positive (call it N) means that we have transferred N bytes | |
| starting at MEMADDR. We might be able to handle more bytes | |
| beyond this length, but no promises. | |
| negative (call its absolute value N) means that we cannot | |
| transfer right at MEMADDR, but we could transfer at least | |
| something at MEMADDR + N. | |
| NOTE: cagney/2004-10-01: This has been entirely superseeded by | |
| to_xfer_partial and inferior inheritance. */ | |
| int (*deprecated_xfer_memory) (CORE_ADDR memaddr, gdb_byte *myaddr, | |
| int len, int write, | |
| struct mem_attrib *attrib, | |
| struct target_ops *target); | |
| void (*to_files_info) (struct target_ops *); | |
| int (*to_insert_breakpoint) (struct bp_target_info *); | |
| int (*to_remove_breakpoint) (struct bp_target_info *); | |
| int (*to_can_use_hw_breakpoint) (int, int, int); | |
| int (*to_insert_hw_breakpoint) (struct bp_target_info *); | |
| int (*to_remove_hw_breakpoint) (struct bp_target_info *); | |
| int (*to_remove_watchpoint) (CORE_ADDR, int, int); | |
| int (*to_insert_watchpoint) (CORE_ADDR, int, int); | |
| int (*to_stopped_by_watchpoint) (void); | |
| int to_have_steppable_watchpoint; | |
| int to_have_continuable_watchpoint; | |
| int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *); | |
| int (*to_watchpoint_addr_within_range) (struct target_ops *, | |
| CORE_ADDR, CORE_ADDR, int); | |
| int (*to_region_ok_for_hw_watchpoint) (CORE_ADDR, int); | |
| void (*to_terminal_init) (void); | |
| void (*to_terminal_inferior) (void); | |
| void (*to_terminal_ours_for_output) (void); | |
| void (*to_terminal_ours) (void); | |
| void (*to_terminal_save_ours) (void); | |
| void (*to_terminal_info) (char *, int); | |
| void (*to_kill) (void); | |
| void (*to_load) (char *, int); | |
| int (*to_lookup_symbol) (char *, CORE_ADDR *); | |
| void (*to_create_inferior) (char *, char *, char **, int); | |
| void (*to_post_startup_inferior) (ptid_t); | |
| void (*to_acknowledge_created_inferior) (int); | |
| void (*to_insert_fork_catchpoint) (int); | |
| int (*to_remove_fork_catchpoint) (int); | |
| void (*to_insert_vfork_catchpoint) (int); | |
| int (*to_remove_vfork_catchpoint) (int); | |
| int (*to_follow_fork) (struct target_ops *, int); | |
| void (*to_insert_exec_catchpoint) (int); | |
| int (*to_remove_exec_catchpoint) (int); | |
| int (*to_has_exited) (int, int, int *); | |
| void (*to_mourn_inferior) (void); | |
| int (*to_can_run) (void); | |
| void (*to_notice_signals) (ptid_t ptid); | |
| int (*to_thread_alive) (ptid_t ptid); | |
| void (*to_find_new_threads) (void); | |
| char *(*to_pid_to_str) (ptid_t); | |
| char *(*to_extra_thread_info) (struct thread_info *); | |
| void (*to_stop) (ptid_t); | |
| void (*to_rcmd) (char *command, struct ui_file *output); | |
| char *(*to_pid_to_exec_file) (int pid); | |
| void (*to_log_command) (const char *); | |
| enum strata to_stratum; | |
| int to_has_all_memory; | |
| int to_has_memory; | |
| int to_has_stack; | |
| int to_has_registers; | |
| int to_has_execution; | |
| int to_has_thread_control; /* control thread execution */ | |
| int to_attach_no_wait; | |
| struct section_table | |
| *to_sections; | |
| struct section_table | |
| *to_sections_end; | |
| /* ASYNC target controls */ | |
| int (*to_can_async_p) (void); | |
| int (*to_is_async_p) (void); | |
| void (*to_async) (void (*) (enum inferior_event_type, void *), void *); | |
| int (*to_async_mask) (int); | |
| int (*to_find_memory_regions) (int (*) (CORE_ADDR, | |
| unsigned long, | |
| int, int, int, | |
| void *), | |
| void *); | |
| char * (*to_make_corefile_notes) (bfd *, int *); | |
| /* Return the thread-local address at OFFSET in the | |
| thread-local storage for the thread PTID and the shared library | |
| or executable file given by OBJFILE. If that block of | |
| thread-local storage hasn't been allocated yet, this function | |
| may return an error. */ | |
| CORE_ADDR (*to_get_thread_local_address) (ptid_t ptid, | |
| CORE_ADDR load_module_addr, | |
| CORE_ADDR offset); | |
| /* Request that OPS transfer up to LEN 8-bit bytes of the target's | |
| OBJECT. The OFFSET, for a seekable object, specifies the | |
| starting point. The ANNEX can be used to provide additional | |
| data-specific information to the target. | |
| Return the number of bytes actually transfered, zero when no | |
| further transfer is possible, and -1 when the transfer is not | |
| supported. Return of a positive value smaller than LEN does | |
| not indicate the end of the object, only the end of the | |
| transfer; higher level code should continue transferring if | |
| desired. This is handled in target.c. | |
| The interface does not support a "retry" mechanism. Instead it | |
| assumes that at least one byte will be transfered on each | |
| successful call. | |
| NOTE: cagney/2003-10-17: The current interface can lead to | |
| fragmented transfers. Lower target levels should not implement | |
| hacks, such as enlarging the transfer, in an attempt to | |
| compensate for this. Instead, the target stack should be | |
| extended so that it implements supply/collect methods and a | |
| look-aside object cache. With that available, the lowest | |
| target can safely and freely "push" data up the stack. | |
| See target_read and target_write for more information. One, | |
| and only one, of readbuf or writebuf must be non-NULL. */ | |
| LONGEST (*to_xfer_partial) (struct target_ops *ops, | |
| enum target_object object, const char *annex, | |
| gdb_byte *readbuf, const gdb_byte *writebuf, | |
| ULONGEST offset, LONGEST len); | |
| /* Returns the memory map for the target. A return value of NULL | |
| means that no memory map is available. If a memory address | |
| does not fall within any returned regions, it's assumed to be | |
| RAM. The returned memory regions should not overlap. | |
| The order of regions does not matter; target_memory_map will | |
| sort regions by starting address. For that reason, this | |
| function should not be called directly except via | |
| target_memory_map. | |
| This method should not cache data; if the memory map could | |
| change unexpectedly, it should be invalidated, and higher | |
| layers will re-fetch it. */ | |
| VEC(mem_region_s) *(*to_memory_map) (struct target_ops *); | |
| /* Erases the region of flash memory starting at ADDRESS, of | |
| length LENGTH. | |
| Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned | |
| on flash block boundaries, as reported by 'to_memory_map'. */ | |
| void (*to_flash_erase) (struct target_ops *, | |
| ULONGEST address, LONGEST length); | |
| /* Finishes a flash memory write sequence. After this operation | |
| all flash memory should be available for writing and the result | |
| of reading from areas written by 'to_flash_write' should be | |
| equal to what was written. */ | |
| void (*to_flash_done) (struct target_ops *); | |
| /* Describe the architecture-specific features of this target. | |
| Returns the description found, or NULL if no description | |
| was available. */ | |
| const struct target_desc *(*to_read_description) (struct target_ops *ops); | |
| /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR. | |
| Return 0 if *READPTR is already at the end of the buffer. | |
| Return -1 if there is insufficient buffer for a whole entry. | |
| Return 1 if an entry was read into *TYPEP and *VALP. */ | |
| int (*to_auxv_parse) (struct target_ops *ops, gdb_byte **readptr, | |
| gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp); | |
| /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the | |
| sequence of bytes in PATTERN with length PATTERN_LEN. | |
| The result is 1 if found, 0 if not found, and -1 if there was an error | |
| requiring halting of the search (e.g. memory read error). | |
| If the pattern is found the address is recorded in FOUND_ADDRP. */ | |
| int (*to_search_memory) (struct target_ops *ops, | |
| CORE_ADDR start_addr, ULONGEST search_space_len, | |
| const gdb_byte *pattern, ULONGEST pattern_len, | |
| CORE_ADDR *found_addrp); | |
| /* Can target execute in reverse? */ | |
| int (*to_can_execute_reverse) (); | |
| /* Default value is 0. Mean that this target doesn't support record wait. | |
| Need the help of infrun.c(handle_inferior_event). Set to 1 if this | |
| target support record wait. */ | |
| int to_support_record_wait; | |
| int to_magic; | |
| /* Need sub-structure for target machine related rather than comm related? | |
| */ | |
| }; | |
| /* Magic number for checking ops size. If a struct doesn't end with this | |
| number, somebody changed the declaration but didn't change all the | |
| places that initialize one. */ | |
| #define OPS_MAGIC 3840 | |
| /* The ops structure for our "current" target process. This should | |
| never be NULL. If there is no target, it points to the dummy_target. */ | |
| extern struct target_ops current_target; | |
| /* Define easy words for doing these operations on our current target. */ | |
| #define target_shortname (current_target.to_shortname) | |
| #define target_longname (current_target.to_longname) | |
| /* Does whatever cleanup is required for a target that we are no | |
| longer going to be calling. QUITTING indicates that GDB is exiting | |
| and should not get hung on an error (otherwise it is important to | |
| perform clean termination, even if it takes a while). This routine | |
| is automatically always called when popping the target off the | |
| target stack (to_beneath is undefined). Closing file descriptors | |
| and freeing all memory allocated memory are typical things it | |
| should do. */ | |
| void target_close (struct target_ops *targ, int quitting); | |
| /* Attaches to a process on the target side. Arguments are as passed | |
| to the `attach' command by the user. This routine can be called | |
| when the target is not on the target-stack, if the target_can_run | |
| routine returns 1; in that case, it must push itself onto the stack. | |
| Upon exit, the target should be ready for normal operations, and | |
| should be ready to deliver the status of the process immediately | |
| (without waiting) to an upcoming target_wait call. */ | |
| #define target_attach(args, from_tty) \ | |
| (*current_target.to_attach) (args, from_tty) | |
| /* Some targets don't generate traps when attaching to the inferior, | |
| or their target_attach implementation takes care of the waiting. | |
| These targets must set to_attach_no_wait. */ | |
| #define target_attach_no_wait \ | |
| (current_target.to_attach_no_wait) | |
| /* The target_attach operation places a process under debugger control, | |
| and stops the process. | |
| This operation provides a target-specific hook that allows the | |
| necessary bookkeeping to be performed after an attach completes. */ | |
| #define target_post_attach(pid) \ | |
| (*current_target.to_post_attach) (pid) | |
| /* Takes a program previously attached to and detaches it. | |
| The program may resume execution (some targets do, some don't) and will | |
| no longer stop on signals, etc. We better not have left any breakpoints | |
| in the program or it'll die when it hits one. ARGS is arguments | |
| typed by the user (e.g. a signal to send the process). FROM_TTY | |
| says whether to be verbose or not. */ | |
| extern void target_detach (char *, int); | |
| /* Disconnect from the current target without resuming it (leaving it | |
| waiting for a debugger). */ | |
| extern void target_disconnect (char *, int); | |
| /* Resume execution of the target process PTID. STEP says whether to | |
| single-step or to run free; SIGGNAL is the signal to be given to | |
| the target, or TARGET_SIGNAL_0 for no signal. The caller may not | |
| pass TARGET_SIGNAL_DEFAULT. */ | |
| extern void target_resume (ptid_t ptid, int step, enum target_signal signal); | |
| /* Wait for process pid to do something. PTID = -1 to wait for any | |
| pid to do something. Return pid of child, or -1 in case of error; | |
| store status through argument pointer STATUS. Note that it is | |
| _NOT_ OK to throw_exception() out of target_wait() without popping | |
| the debugging target from the stack; GDB isn't prepared to get back | |
| to the prompt with a debugging target but without the frame cache, | |
| stop_pc, etc., set up. */ | |
| #define target_wait(ptid, status) \ | |
| (*current_target.to_wait) (ptid, status) | |
| /* Fetch at least register REGNO, or all regs if regno == -1. No result. */ | |
| #define target_fetch_registers(regcache, regno) \ | |
| (*current_target.to_fetch_registers) (regcache, regno) | |
| /* Store at least register REGNO, or all regs if REGNO == -1. | |
| It can store as many registers as it wants to, so target_prepare_to_store | |
| must have been previously called. Calls error() if there are problems. */ | |
| #define target_store_registers(regcache, regs) \ | |
| (*current_target.to_store_registers) (regcache, regs) | |
| /* Get ready to modify the registers array. On machines which store | |
| individual registers, this doesn't need to do anything. On machines | |
| which store all the registers in one fell swoop, this makes sure | |
| that REGISTERS contains all the registers from the program being | |
| debugged. */ | |
| #define target_prepare_to_store(regcache) \ | |
| (*current_target.to_prepare_to_store) (regcache) | |
| extern DCACHE *target_dcache; | |
| extern int target_read_string (CORE_ADDR, char **, int, int *); | |
| extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len); | |
| extern int target_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr, | |
| int len); | |
| extern int xfer_memory (CORE_ADDR, gdb_byte *, int, int, | |
| struct mem_attrib *, struct target_ops *); | |
| /* Fetches the target's memory map. If one is found it is sorted | |
| and returned, after some consistency checking. Otherwise, NULL | |
| is returned. */ | |
| VEC(mem_region_s) *target_memory_map (void); | |
| /* Erase the specified flash region. */ | |
| void target_flash_erase (ULONGEST address, LONGEST length); | |
| /* Finish a sequence of flash operations. */ | |
| void target_flash_done (void); | |
| /* Describes a request for a memory write operation. */ | |
| struct memory_write_request | |
| { | |
| /* Begining address that must be written. */ | |
| ULONGEST begin; | |
| /* Past-the-end address. */ | |
| ULONGEST end; | |
| /* The data to write. */ | |
| gdb_byte *data; | |
| /* A callback baton for progress reporting for this request. */ | |
| void *baton; | |
| }; | |
| typedef struct memory_write_request memory_write_request_s; | |
| DEF_VEC_O(memory_write_request_s); | |
| /* Enumeration specifying different flash preservation behaviour. */ | |
| enum flash_preserve_mode | |
| { | |
| flash_preserve, | |
| flash_discard | |
| }; | |
| /* Write several memory blocks at once. This version can be more | |
| efficient than making several calls to target_write_memory, in | |
| particular because it can optimize accesses to flash memory. | |
| Moreover, this is currently the only memory access function in gdb | |
| that supports writing to flash memory, and it should be used for | |
| all cases where access to flash memory is desirable. | |
| REQUESTS is the vector (see vec.h) of memory_write_request. | |
| PRESERVE_FLASH_P indicates what to do with blocks which must be | |
| erased, but not completely rewritten. | |
| PROGRESS_CB is a function that will be periodically called to provide | |
| feedback to user. It will be called with the baton corresponding | |
| to the request currently being written. It may also be called | |
| with a NULL baton, when preserved flash sectors are being rewritten. | |
| The function returns 0 on success, and error otherwise. */ | |
| int target_write_memory_blocks (VEC(memory_write_request_s) *requests, | |
| enum flash_preserve_mode preserve_flash_p, | |
| void (*progress_cb) (ULONGEST, void *)); | |
| /* From infrun.c. */ | |
| extern int inferior_has_forked (ptid_t pid, ptid_t *child_pid); | |
| extern int inferior_has_vforked (ptid_t pid, ptid_t *child_pid); | |
| extern int inferior_has_execd (ptid_t pid, char **execd_pathname); | |
| /* From exec.c */ | |
| extern void print_section_info (struct target_ops *, bfd *); | |
| /* Print a line about the current target. */ | |
| #define target_files_info() \ | |
| (*current_target.to_files_info) (¤t_target) | |
| /* Insert a breakpoint at address BP_TGT->placed_address in the target | |
| machine. Result is 0 for success, or an errno value. */ | |
| #define target_insert_breakpoint(bp_tgt) \ | |
| (*current_target.to_insert_breakpoint) (bp_tgt) | |
| /* Remove a breakpoint at address BP_TGT->placed_address in the target | |
| machine. Result is 0 for success, or an errno value. */ | |
| #define target_remove_breakpoint(bp_tgt) \ | |
| (*current_target.to_remove_breakpoint) (bp_tgt) | |
| /* Initialize the terminal settings we record for the inferior, | |
| before we actually run the inferior. */ | |
| #define target_terminal_init() \ | |
| (*current_target.to_terminal_init) () | |
| /* Put the inferior's terminal settings into effect. | |
| This is preparation for starting or resuming the inferior. */ | |
| #define target_terminal_inferior() \ | |
| (*current_target.to_terminal_inferior) () | |
| /* Put some of our terminal settings into effect, | |
| enough to get proper results from our output, | |
| but do not change into or out of RAW mode | |
| so that no input is discarded. | |
| After doing this, either terminal_ours or terminal_inferior | |
| should be called to get back to a normal state of affairs. */ | |
| #define target_terminal_ours_for_output() \ | |
| (*current_target.to_terminal_ours_for_output) () | |
| /* Put our terminal settings into effect. | |
| First record the inferior's terminal settings | |
| so they can be restored properly later. */ | |
| #define target_terminal_ours() \ | |
| (*current_target.to_terminal_ours) () | |
| /* Save our terminal settings. | |
| This is called from TUI after entering or leaving the curses | |
| mode. Since curses modifies our terminal this call is here | |
| to take this change into account. */ | |
| #define target_terminal_save_ours() \ | |
| (*current_target.to_terminal_save_ours) () | |
| /* Print useful information about our terminal status, if such a thing | |
| exists. */ | |
| #define target_terminal_info(arg, from_tty) \ | |
| (*current_target.to_terminal_info) (arg, from_tty) | |
| /* Kill the inferior process. Make it go away. */ | |
| #define target_kill() \ | |
| (*current_target.to_kill) () | |
| /* Load an executable file into the target process. This is expected | |
| to not only bring new code into the target process, but also to | |
| update GDB's symbol tables to match. | |
| ARG contains command-line arguments, to be broken down with | |
| buildargv (). The first non-switch argument is the filename to | |
| load, FILE; the second is a number (as parsed by strtoul (..., ..., | |
| 0)), which is an offset to apply to the load addresses of FILE's | |
| sections. The target may define switches, or other non-switch | |
| arguments, as it pleases. */ | |
| extern void target_load (char *arg, int from_tty); | |
| /* Look up a symbol in the target's symbol table. NAME is the symbol | |
| name. ADDRP is a CORE_ADDR * pointing to where the value of the | |
| symbol should be returned. The result is 0 if successful, nonzero | |
| if the symbol does not exist in the target environment. This | |
| function should not call error() if communication with the target | |
| is interrupted, since it is called from symbol reading, but should | |
| return nonzero, possibly doing a complain(). */ | |
| #define target_lookup_symbol(name, addrp) \ | |
| (*current_target.to_lookup_symbol) (name, addrp) | |
| /* Start an inferior process and set inferior_ptid to its pid. | |
| EXEC_FILE is the file to run. | |
| ALLARGS is a string containing the arguments to the program. | |
| ENV is the environment vector to pass. Errors reported with error(). | |
| On VxWorks and various standalone systems, we ignore exec_file. */ | |
| #define target_create_inferior(exec_file, args, env, FROM_TTY) \ | |
| (*current_target.to_create_inferior) (exec_file, args, env, (FROM_TTY)) | |
| /* Some targets (such as ttrace-based HPUX) don't allow us to request | |
| notification of inferior events such as fork and vork immediately | |
| after the inferior is created. (This because of how gdb gets an | |
| inferior created via invoking a shell to do it. In such a scenario, | |
| if the shell init file has commands in it, the shell will fork and | |
| exec for each of those commands, and we will see each such fork | |
| event. Very bad.) | |
| Such targets will supply an appropriate definition for this function. */ | |
| #define target_post_startup_inferior(ptid) \ | |
| (*current_target.to_post_startup_inferior) (ptid) | |
| /* On some targets, the sequence of starting up an inferior requires | |
| some synchronization between gdb and the new inferior process, PID. */ | |
| #define target_acknowledge_created_inferior(pid) \ | |
| (*current_target.to_acknowledge_created_inferior) (pid) | |
| /* On some targets, we can catch an inferior fork or vfork event when | |
| it occurs. These functions insert/remove an already-created | |
| catchpoint for such events. */ | |
| #define target_insert_fork_catchpoint(pid) \ | |
| (*current_target.to_insert_fork_catchpoint) (pid) | |
| #define target_remove_fork_catchpoint(pid) \ | |
| (*current_target.to_remove_fork_catchpoint) (pid) | |
| #define target_insert_vfork_catchpoint(pid) \ | |
| (*current_target.to_insert_vfork_catchpoint) (pid) | |
| #define target_remove_vfork_catchpoint(pid) \ | |
| (*current_target.to_remove_vfork_catchpoint) (pid) | |
| /* If the inferior forks or vforks, this function will be called at | |
| the next resume in order to perform any bookkeeping and fiddling | |
| necessary to continue debugging either the parent or child, as | |
| requested, and releasing the other. Information about the fork | |
| or vfork event is available via get_last_target_status (). | |
| This function returns 1 if the inferior should not be resumed | |
| (i.e. there is another event pending). */ | |
| int target_follow_fork (int follow_child); | |
| /* On some targets, we can catch an inferior exec event when it | |
| occurs. These functions insert/remove an already-created | |
| catchpoint for such events. */ | |
| #define target_insert_exec_catchpoint(pid) \ | |
| (*current_target.to_insert_exec_catchpoint) (pid) | |
| #define target_remove_exec_catchpoint(pid) \ | |
| (*current_target.to_remove_exec_catchpoint) (pid) | |
| /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the | |
| exit code of PID, if any. */ | |
| #define target_has_exited(pid,wait_status,exit_status) \ | |
| (*current_target.to_has_exited) (pid,wait_status,exit_status) | |
| /* The debugger has completed a blocking wait() call. There is now | |
| some process event that must be processed. This function should | |
| be defined by those targets that require the debugger to perform | |
| cleanup or internal state changes in response to the process event. */ | |
| /* The inferior process has died. Do what is right. */ | |
| #define target_mourn_inferior() \ | |
| (*current_target.to_mourn_inferior) () | |
| /* Does target have enough data to do a run or attach command? */ | |
| #define target_can_run(t) \ | |
| ((t)->to_can_run) () | |
| /* post process changes to signal handling in the inferior. */ | |
| #define target_notice_signals(ptid) \ | |
| (*current_target.to_notice_signals) (ptid) | |
| /* Check to see if a thread is still alive. */ | |
| #define target_thread_alive(ptid) \ | |
| (*current_target.to_thread_alive) (ptid) | |
| /* Query for new threads and add them to the thread list. */ | |
| #define target_find_new_threads() \ | |
| (*current_target.to_find_new_threads) () | |
| /* Make target stop in a continuable fashion. (For instance, under | |
| Unix, this should act like SIGSTOP). This function is normally | |
| used by GUIs to implement a stop button. */ | |
| #define target_stop(ptid) (*current_target.to_stop) (ptid) | |
| /* Send the specified COMMAND to the target's monitor | |
| (shell,interpreter) for execution. The result of the query is | |
| placed in OUTBUF. */ | |
| #define target_rcmd(command, outbuf) \ | |
| (*current_target.to_rcmd) (command, outbuf) | |
| /* Does the target include all of memory, or only part of it? This | |
| determines whether we look up the target chain for other parts of | |
| memory if this target can't satisfy a request. */ | |
| #define target_has_all_memory \ | |
| (current_target.to_has_all_memory) | |
| /* Does the target include memory? (Dummy targets don't.) */ | |
| #define target_has_memory \ | |
| (current_target.to_has_memory) | |
| /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until | |
| we start a process.) */ | |
| #define target_has_stack \ | |
| (current_target.to_has_stack) | |
| /* Does the target have registers? (Exec files don't.) */ | |
| #define target_has_registers \ | |
| (current_target.to_has_registers) | |
| /* Does the target have execution? Can we make it jump (through | |
| hoops), or pop its stack a few times? This means that the current | |
| target is currently executing; for some targets, that's the same as | |
| whether or not the target is capable of execution, but there are | |
| also targets which can be current while not executing. In that | |
| case this will become true after target_create_inferior or | |
| target_attach. */ | |
| #define target_has_execution \ | |
| (current_target.to_has_execution) | |
| /* Can the target support the debugger control of thread execution? | |
| Can it lock the thread scheduler? */ | |
| #define target_can_lock_scheduler \ | |
| (current_target.to_has_thread_control & tc_schedlock) | |
| /* Can the target support asynchronous execution? */ | |
| #define target_can_async_p() (current_target.to_can_async_p ()) | |
| /* Is the target in asynchronous execution mode? */ | |
| #define target_is_async_p() (current_target.to_is_async_p ()) | |
| /* Put the target in async mode with the specified callback function. */ | |
| #define target_async(CALLBACK,CONTEXT) \ | |
| (current_target.to_async ((CALLBACK), (CONTEXT))) | |
| /* This is to be used ONLY within call_function_by_hand(). It provides | |
| a workaround, to have inferior function calls done in sychronous | |
| mode, even though the target is asynchronous. After | |
| target_async_mask(0) is called, calls to target_can_async_p() will | |
| return FALSE , so that target_resume() will not try to start the | |
| target asynchronously. After the inferior stops, we IMMEDIATELY | |
| restore the previous nature of the target, by calling | |
| target_async_mask(1). After that, target_can_async_p() will return | |
| TRUE. ANY OTHER USE OF THIS FEATURE IS DEPRECATED. | |
| FIXME ezannoni 1999-12-13: we won't need this once we move | |
| the turning async on and off to the single execution commands, | |
| from where it is done currently, in remote_resume(). */ | |
| #define target_async_mask(MASK) \ | |
| (current_target.to_async_mask (MASK)) | |
| /* Converts a process id to a string. Usually, the string just contains | |
| `process xyz', but on some systems it may contain | |
| `process xyz thread abc'. */ | |
| #undef target_pid_to_str | |
| #define target_pid_to_str(PID) current_target.to_pid_to_str (PID) | |
| #ifndef target_tid_to_str | |
| #define target_tid_to_str(PID) \ | |
| target_pid_to_str (PID) | |
| extern char *normal_pid_to_str (ptid_t ptid); | |
| #endif | |
| /* Return a short string describing extra information about PID, | |
| e.g. "sleeping", "runnable", "running on LWP 3". Null return value | |
| is okay. */ | |
| #define target_extra_thread_info(TP) \ | |
| (current_target.to_extra_thread_info (TP)) | |
| /* Attempts to find the pathname of the executable file | |
| that was run to create a specified process. | |
| The process PID must be stopped when this operation is used. | |
| If the executable file cannot be determined, NULL is returned. | |
| Else, a pointer to a character string containing the pathname | |
| is returned. This string should be copied into a buffer by | |
| the client if the string will not be immediately used, or if | |
| it must persist. */ | |
| #define target_pid_to_exec_file(pid) \ | |
| (current_target.to_pid_to_exec_file) (pid) | |
| /* | |
| * Iterator function for target memory regions. | |
| * Calls a callback function once for each memory region 'mapped' | |
| * in the child process. Defined as a simple macro rather than | |
| * as a function macro so that it can be tested for nullity. | |
| */ | |
| #define target_find_memory_regions(FUNC, DATA) \ | |
| (current_target.to_find_memory_regions) (FUNC, DATA) | |
| /* | |
| * Compose corefile .note section. | |
| */ | |
| #define target_make_corefile_notes(BFD, SIZE_P) \ | |
| (current_target.to_make_corefile_notes) (BFD, SIZE_P) | |
| /* Thread-local values. */ | |
| #define target_get_thread_local_address \ | |
| (current_target.to_get_thread_local_address) | |
| #define target_get_thread_local_address_p() \ | |
| (target_get_thread_local_address != NULL) | |
| /* Hardware watchpoint interfaces. */ | |
| /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or | |
| write). */ | |
| #ifndef STOPPED_BY_WATCHPOINT | |
| #define STOPPED_BY_WATCHPOINT(w) \ | |
| (*current_target.to_stopped_by_watchpoint) () | |
| #endif | |
| /* Non-zero if we have steppable watchpoints */ | |
| #ifndef HAVE_STEPPABLE_WATCHPOINT | |
| #define HAVE_STEPPABLE_WATCHPOINT \ | |
| (current_target.to_have_steppable_watchpoint) | |
| #endif | |
| /* Non-zero if we have continuable watchpoints */ | |
| #ifndef HAVE_CONTINUABLE_WATCHPOINT | |
| #define HAVE_CONTINUABLE_WATCHPOINT \ | |
| (current_target.to_have_continuable_watchpoint) | |
| #endif | |
| /* Provide defaults for hardware watchpoint functions. */ | |
| /* If the *_hw_beakpoint functions have not been defined | |
| elsewhere use the definitions in the target vector. */ | |
| /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is | |
| one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or | |
| bp_hardware_breakpoint. CNT is the number of such watchpoints used so far | |
| (including this one?). OTHERTYPE is who knows what... */ | |
| #ifndef TARGET_CAN_USE_HARDWARE_WATCHPOINT | |
| #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) \ | |
| (*current_target.to_can_use_hw_breakpoint) (TYPE, CNT, OTHERTYPE); | |
| #endif | |
| #ifndef TARGET_REGION_OK_FOR_HW_WATCHPOINT | |
| #define TARGET_REGION_OK_FOR_HW_WATCHPOINT(addr, len) \ | |
| (*current_target.to_region_ok_for_hw_watchpoint) (addr, len) | |
| #endif | |
| /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes. TYPE is 0 | |
| for write, 1 for read, and 2 for read/write accesses. Returns 0 for | |
| success, non-zero for failure. */ | |
| #ifndef target_insert_watchpoint | |
| #define target_insert_watchpoint(addr, len, type) \ | |
| (*current_target.to_insert_watchpoint) (addr, len, type) | |
| #define target_remove_watchpoint(addr, len, type) \ | |
| (*current_target.to_remove_watchpoint) (addr, len, type) | |
| #endif | |
| #ifndef target_insert_hw_breakpoint | |
| #define target_insert_hw_breakpoint(bp_tgt) \ | |
| (*current_target.to_insert_hw_breakpoint) (bp_tgt) | |
| #define target_remove_hw_breakpoint(bp_tgt) \ | |
| (*current_target.to_remove_hw_breakpoint) (bp_tgt) | |
| #endif | |
| extern int target_stopped_data_address_p (struct target_ops *); | |
| #ifndef target_stopped_data_address | |
| #define target_stopped_data_address(target, x) \ | |
| (*target.to_stopped_data_address) (target, x) | |
| #else | |
| /* Horrible hack to get around existing macros :-(. */ | |
| #define target_stopped_data_address_p(CURRENT_TARGET) (1) | |
| #endif | |
| #define target_watchpoint_addr_within_range(target, addr, start, length) \ | |
| (*target.to_watchpoint_addr_within_range) (target, addr, start, length) | |
| /* Target can execute in reverse? */ | |
| #define target_can_execute_reverse \ | |
| (current_target.to_can_execute_reverse ? \ | |
| current_target.to_can_execute_reverse () : 0) | |
| extern const struct target_desc *target_read_description (struct target_ops *); | |
| /* Utility implementation of searching memory. */ | |
| extern int simple_search_memory (struct target_ops* ops, | |
| CORE_ADDR start_addr, | |
| ULONGEST search_space_len, | |
| const gdb_byte *pattern, | |
| ULONGEST pattern_len, | |
| CORE_ADDR *found_addrp); | |
| /* Main entry point for searching memory. */ | |
| extern int target_search_memory (CORE_ADDR start_addr, | |
| ULONGEST search_space_len, | |
| const gdb_byte *pattern, | |
| ULONGEST pattern_len, | |
| CORE_ADDR *found_addrp); | |
| /* Command logging facility. */ | |
| #define target_log_command(p) \ | |
| do \ | |
| if (current_target.to_log_command) \ | |
| (*current_target.to_log_command) (p); \ | |
| while (0) | |
| /* Routines for maintenance of the target structures... | |
| add_target: Add a target to the list of all possible targets. | |
| push_target: Make this target the top of the stack of currently used | |
| targets, within its particular stratum of the stack. Result | |
| is 0 if now atop the stack, nonzero if not on top (maybe | |
| should warn user). | |
| unpush_target: Remove this from the stack of currently used targets, | |
| no matter where it is on the list. Returns 0 if no | |
| change, 1 if removed from stack. | |
| pop_target: Remove the top thing on the stack of current targets. */ | |
| extern void add_target (struct target_ops *); | |
| extern int push_target (struct target_ops *); | |
| extern int unpush_target (struct target_ops *); | |
| extern void target_pre_inferior (int); | |
| extern void target_preopen (int); | |
| extern void pop_target (void); | |
| extern CORE_ADDR target_translate_tls_address (struct objfile *objfile, | |
| CORE_ADDR offset); | |
| /* Mark a pushed target as running or exited, for targets which do not | |
| automatically pop when not active. */ | |
| void target_mark_running (struct target_ops *); | |
| void target_mark_exited (struct target_ops *); | |
| /* Struct section_table maps address ranges to file sections. It is | |
| mostly used with BFD files, but can be used without (e.g. for handling | |
| raw disks, or files not in formats handled by BFD). */ | |
| struct section_table | |
| { | |
| CORE_ADDR addr; /* Lowest address in section */ | |
| CORE_ADDR endaddr; /* 1+highest address in section */ | |
| struct bfd_section *the_bfd_section; | |
| bfd *bfd; /* BFD file pointer */ | |
| }; | |
| /* Return the "section" containing the specified address. */ | |
| struct section_table *target_section_by_addr (struct target_ops *target, | |
| CORE_ADDR addr); | |
| /* From mem-break.c */ | |
| extern int memory_remove_breakpoint (struct bp_target_info *); | |
| extern int memory_insert_breakpoint (struct bp_target_info *); | |
| extern int default_memory_remove_breakpoint (struct gdbarch *, struct bp_target_info *); | |
| extern int default_memory_insert_breakpoint (struct gdbarch *, struct bp_target_info *); | |
| /* From target.c */ | |
| extern void initialize_targets (void); | |
| extern void noprocess (void); | |
| extern void target_require_runnable (void); | |
| extern void find_default_attach (char *, int); | |
| extern void find_default_create_inferior (char *, char *, char **, int); | |
| extern struct target_ops *find_run_target (void); | |
| extern struct target_ops *find_core_target (void); | |
| extern struct target_ops *find_target_beneath (struct target_ops *); | |
| extern int target_resize_to_sections (struct target_ops *target, | |
| int num_added); | |
| extern void remove_target_sections (bfd *abfd); | |
| /* Stuff that should be shared among the various remote targets. */ | |
| /* Debugging level. 0 is off, and non-zero values mean to print some debug | |
| information (higher values, more information). */ | |
| extern int remote_debug; | |
| /* Speed in bits per second, or -1 which means don't mess with the speed. */ | |
| extern int baud_rate; | |
| /* Timeout limit for response from target. */ | |
| extern int remote_timeout; | |
| /* Functions for helping to write a native target. */ | |
| /* This is for native targets which use a unix/POSIX-style waitstatus. */ | |
| extern void store_waitstatus (struct target_waitstatus *, int); | |
| /* Predicate to target_signal_to_host(). Return non-zero if the enum | |
| targ_signal SIGNO has an equivalent ``host'' representation. */ | |
| /* FIXME: cagney/1999-11-22: The name below was chosen in preference | |
| to the shorter target_signal_p() because it is far less ambigious. | |
| In this context ``target_signal'' refers to GDB's internal | |
| representation of the target's set of signals while ``host signal'' | |
| refers to the target operating system's signal. Confused? */ | |
| extern int target_signal_to_host_p (enum target_signal signo); | |
| /* Convert between host signal numbers and enum target_signal's. | |
| target_signal_to_host() returns 0 and prints a warning() on GDB's | |
| console if SIGNO has no equivalent host representation. */ | |
| /* FIXME: cagney/1999-11-22: Here ``host'' is used incorrectly, it is | |
| refering to the target operating system's signal numbering. | |
| Similarly, ``enum target_signal'' is named incorrectly, ``enum | |
| gdb_signal'' would probably be better as it is refering to GDB's | |
| internal representation of a target operating system's signal. */ | |
| extern enum target_signal target_signal_from_host (int); | |
| extern int target_signal_to_host (enum target_signal); | |
| extern enum target_signal default_target_signal_from_host (struct gdbarch *, | |
| int); | |
| extern int default_target_signal_to_host (struct gdbarch *, | |
| enum target_signal); | |
| /* Convert from a number used in a GDB command to an enum target_signal. */ | |
| extern enum target_signal target_signal_from_command (int); | |
| /* Any target can call this to switch to remote protocol (in remote.c). */ | |
| extern void push_remote_target (char *name, int from_tty); | |
| /* Set the show memory breakpoints mode to show, and installs a cleanup | |
| to restore it back to the current value. */ | |
| extern struct cleanup *make_show_memory_breakpoints_cleanup (int show); | |
| /* Imported from machine dependent code */ | |
| /* Blank target vector entries are initialized to target_ignore. */ | |
| void target_ignore (void); | |
| extern struct target_ops deprecated_child_ops; | |
| #endif /* !defined (TARGET_H) */ |