| /* Read AIX xcoff symbol tables and convert to internal format, for GDB. | |
| Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, | |
| 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| Derived from coffread.c, dbxread.c, and a lot of hacking. | |
| Contributed by IBM Corporation. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "bfd.h" | |
| #include <sys/types.h> | |
| #include <fcntl.h> | |
| #include <ctype.h> | |
| #include "gdb_string.h" | |
| #include <sys/param.h> | |
| #ifdef HAVE_SYS_FILE_H | |
| #include <sys/file.h> | |
| #endif | |
| #include "gdb_stat.h" | |
| #include "coff/internal.h" | |
| #include "libcoff.h" /* FIXME, internal data from BFD */ | |
| #include "coff/xcoff.h" | |
| #include "libxcoff.h" | |
| #include "coff/rs6000.h" | |
| #include "symtab.h" | |
| #include "gdbtypes.h" | |
| /* FIXME: ezannoni/2004-02-13 Verify if the include below is really needed. */ | |
| #include "symfile.h" | |
| #include "objfiles.h" | |
| #include "buildsym.h" | |
| #include "stabsread.h" | |
| #include "expression.h" | |
| #include "complaints.h" | |
| #include "gdb-stabs.h" | |
| /* For interface with stabsread.c. */ | |
| #include "aout/stab_gnu.h" | |
| /* We put a pointer to this structure in the read_symtab_private field | |
| of the psymtab. */ | |
| struct symloc | |
| { | |
| /* First symbol number for this file. */ | |
| int first_symnum; | |
| /* Number of symbols in the section of the symbol table devoted to | |
| this file's symbols (actually, the section bracketed may contain | |
| more than just this file's symbols). If numsyms is 0, the only | |
| reason for this thing's existence is the dependency list. Nothing | |
| else will happen when it is read in. */ | |
| int numsyms; | |
| /* Position of the start of the line number information for this psymtab. */ | |
| unsigned int lineno_off; | |
| }; | |
| /* Remember what we deduced to be the source language of this psymtab. */ | |
| static enum language psymtab_language = language_unknown; | |
| /* Simplified internal version of coff symbol table information */ | |
| struct coff_symbol | |
| { | |
| char *c_name; | |
| int c_symnum; /* symbol number of this entry */ | |
| int c_naux; /* 0 if syment only, 1 if syment + auxent */ | |
| long c_value; | |
| unsigned char c_sclass; | |
| int c_secnum; | |
| unsigned int c_type; | |
| }; | |
| /* last function's saved coff symbol `cs' */ | |
| static struct coff_symbol fcn_cs_saved; | |
| static bfd *symfile_bfd; | |
| /* Core address of start and end of text of current source file. | |
| This is calculated from the first function seen after a C_FILE | |
| symbol. */ | |
| static CORE_ADDR cur_src_end_addr; | |
| /* Core address of the end of the first object file. */ | |
| static CORE_ADDR first_object_file_end; | |
| /* initial symbol-table-debug-string vector length */ | |
| #define INITIAL_STABVECTOR_LENGTH 40 | |
| /* Nonzero if within a function (so symbols should be local, | |
| if nothing says specifically). */ | |
| int within_function; | |
| /* Size of a COFF symbol. I think it is always 18, so I'm not sure | |
| there is any reason not to just use a #define, but might as well | |
| ask BFD for the size and store it here, I guess. */ | |
| static unsigned local_symesz; | |
| struct coff_symfile_info | |
| { | |
| file_ptr min_lineno_offset; /* Where in file lowest line#s are */ | |
| file_ptr max_lineno_offset; /* 1+last byte of line#s in file */ | |
| /* Pointer to the string table. */ | |
| char *strtbl; | |
| /* Pointer to debug section. */ | |
| char *debugsec; | |
| /* Pointer to the a.out symbol table. */ | |
| char *symtbl; | |
| /* Number of symbols in symtbl. */ | |
| int symtbl_num_syms; | |
| /* Offset in data section to TOC anchor. */ | |
| CORE_ADDR toc_offset; | |
| }; | |
| static void | |
| bf_notfound_complaint (void) | |
| { | |
| complaint (&symfile_complaints, _("line numbers off, `.bf' symbol not found")); | |
| } | |
| static void | |
| ef_complaint (int arg1) | |
| { | |
| complaint (&symfile_complaints, | |
| _("Mismatched .ef symbol ignored starting at symnum %d"), arg1); | |
| } | |
| static void | |
| eb_complaint (int arg1) | |
| { | |
| complaint (&symfile_complaints, | |
| _("Mismatched .eb symbol ignored starting at symnum %d"), arg1); | |
| } | |
| static void xcoff_initial_scan (struct objfile *, int); | |
| static void scan_xcoff_symtab (struct objfile *); | |
| static char *xcoff_next_symbol_text (struct objfile *); | |
| static void record_include_begin (struct coff_symbol *); | |
| static void | |
| enter_line_range (struct subfile *, unsigned, unsigned, | |
| CORE_ADDR, CORE_ADDR, unsigned *); | |
| static void init_stringtab (bfd *, file_ptr, struct objfile *); | |
| static void xcoff_symfile_init (struct objfile *); | |
| static void xcoff_new_init (struct objfile *); | |
| static void xcoff_symfile_finish (struct objfile *); | |
| static void xcoff_symfile_offsets (struct objfile *, | |
| struct section_addr_info *addrs); | |
| static char *coff_getfilename (union internal_auxent *, struct objfile *); | |
| static void read_symbol (struct internal_syment *, int); | |
| static int read_symbol_lineno (int); | |
| static CORE_ADDR read_symbol_nvalue (int); | |
| static struct symbol *process_xcoff_symbol (struct coff_symbol *, | |
| struct objfile *); | |
| static void read_xcoff_symtab (struct partial_symtab *); | |
| #if 0 | |
| static void add_stab_to_list (char *, struct pending_stabs **); | |
| #endif | |
| static int compare_lte (const void *, const void *); | |
| static struct linetable *arrange_linetable (struct linetable *); | |
| static void record_include_end (struct coff_symbol *); | |
| static void process_linenos (CORE_ADDR, CORE_ADDR); | |
| /* Translate from a COFF section number (target_index) to a SECT_OFF_* | |
| code. */ | |
| static int secnum_to_section (int, struct objfile *); | |
| static asection *secnum_to_bfd_section (int, struct objfile *); | |
| struct find_targ_sec_arg | |
| { | |
| int targ_index; | |
| int *resultp; | |
| asection **bfd_sect; | |
| struct objfile *objfile; | |
| }; | |
| static void find_targ_sec (bfd *, asection *, void *); | |
| static void | |
| find_targ_sec (bfd *abfd, asection *sect, void *obj) | |
| { | |
| struct find_targ_sec_arg *args = (struct find_targ_sec_arg *) obj; | |
| struct objfile *objfile = args->objfile; | |
| if (sect->target_index == args->targ_index) | |
| { | |
| /* This is the section. Figure out what SECT_OFF_* code it is. */ | |
| if (bfd_get_section_flags (abfd, sect) & SEC_CODE) | |
| *args->resultp = SECT_OFF_TEXT (objfile); | |
| else if (bfd_get_section_flags (abfd, sect) & SEC_LOAD) | |
| *args->resultp = SECT_OFF_DATA (objfile); | |
| else | |
| *args->resultp = sect->index; | |
| *args->bfd_sect = sect; | |
| } | |
| } | |
| /* Return the section number (SECT_OFF_*) that CS points to. */ | |
| static int | |
| secnum_to_section (int secnum, struct objfile *objfile) | |
| { | |
| int off = SECT_OFF_TEXT (objfile); | |
| asection *sect = NULL; | |
| struct find_targ_sec_arg args; | |
| args.targ_index = secnum; | |
| args.resultp = &off; | |
| args.bfd_sect = § | |
| args.objfile = objfile; | |
| bfd_map_over_sections (objfile->obfd, find_targ_sec, &args); | |
| return off; | |
| } | |
| /* Return the BFD section that CS points to. */ | |
| static asection * | |
| secnum_to_bfd_section (int secnum, struct objfile *objfile) | |
| { | |
| int off = SECT_OFF_TEXT (objfile); | |
| asection *sect = NULL; | |
| struct find_targ_sec_arg args; | |
| args.targ_index = secnum; | |
| args.resultp = &off; | |
| args.bfd_sect = § | |
| args.objfile = objfile; | |
| bfd_map_over_sections (objfile->obfd, find_targ_sec, &args); | |
| return sect; | |
| } | |
| /* add a given stab string into given stab vector. */ | |
| #if 0 | |
| static void | |
| add_stab_to_list (char *stabname, struct pending_stabs **stabvector) | |
| { | |
| if (*stabvector == NULL) | |
| { | |
| *stabvector = (struct pending_stabs *) | |
| xmalloc (sizeof (struct pending_stabs) + | |
| INITIAL_STABVECTOR_LENGTH * sizeof (char *)); | |
| (*stabvector)->count = 0; | |
| (*stabvector)->length = INITIAL_STABVECTOR_LENGTH; | |
| } | |
| else if ((*stabvector)->count >= (*stabvector)->length) | |
| { | |
| (*stabvector)->length += INITIAL_STABVECTOR_LENGTH; | |
| *stabvector = (struct pending_stabs *) | |
| xrealloc ((char *) *stabvector, sizeof (struct pending_stabs) + | |
| (*stabvector)->length * sizeof (char *)); | |
| } | |
| (*stabvector)->stab[(*stabvector)->count++] = stabname; | |
| } | |
| #endif | |
| /* *INDENT-OFF* */ | |
| /* Linenos are processed on a file-by-file basis. | |
| Two reasons: | |
| 1) xlc (IBM's native c compiler) postpones static function code | |
| emission to the end of a compilation unit. This way it can | |
| determine if those functions (statics) are needed or not, and | |
| can do some garbage collection (I think). This makes line | |
| numbers and corresponding addresses unordered, and we end up | |
| with a line table like: | |
| lineno addr | |
| foo() 10 0x100 | |
| 20 0x200 | |
| 30 0x300 | |
| foo3() 70 0x400 | |
| 80 0x500 | |
| 90 0x600 | |
| static foo2() | |
| 40 0x700 | |
| 50 0x800 | |
| 60 0x900 | |
| and that breaks gdb's binary search on line numbers, if the | |
| above table is not sorted on line numbers. And that sort | |
| should be on function based, since gcc can emit line numbers | |
| like: | |
| 10 0x100 - for the init/test part of a for stmt. | |
| 20 0x200 | |
| 30 0x300 | |
| 10 0x400 - for the increment part of a for stmt. | |
| arrange_linetable() will do this sorting. | |
| 2) aix symbol table might look like: | |
| c_file // beginning of a new file | |
| .bi // beginning of include file | |
| .ei // end of include file | |
| .bi | |
| .ei | |
| basically, .bi/.ei pairs do not necessarily encapsulate | |
| their scope. They need to be recorded, and processed later | |
| on when we come the end of the compilation unit. | |
| Include table (inclTable) and process_linenos() handle | |
| that. */ | |
| /* *INDENT-ON* */ | |
| /* compare line table entry addresses. */ | |
| static int | |
| compare_lte (const void *lte1p, const void *lte2p) | |
| { | |
| struct linetable_entry *lte1 = (struct linetable_entry *) lte1p; | |
| struct linetable_entry *lte2 = (struct linetable_entry *) lte2p; | |
| return lte1->pc - lte2->pc; | |
| } | |
| /* Given a line table with function entries are marked, arrange its functions | |
| in ascending order and strip off function entry markers and return it in | |
| a newly created table. If the old one is good enough, return the old one. */ | |
| /* FIXME: I think all this stuff can be replaced by just passing | |
| sort_linevec = 1 to end_symtab. */ | |
| static struct linetable * | |
| arrange_linetable (struct linetable *oldLineTb) | |
| { | |
| int ii, jj, newline, /* new line count */ | |
| function_count; /* # of functions */ | |
| struct linetable_entry *fentry; /* function entry vector */ | |
| int fentry_size; /* # of function entries */ | |
| struct linetable *newLineTb; /* new line table */ | |
| #define NUM_OF_FUNCTIONS 20 | |
| fentry_size = NUM_OF_FUNCTIONS; | |
| fentry = (struct linetable_entry *) | |
| xmalloc (fentry_size * sizeof (struct linetable_entry)); | |
| for (function_count = 0, ii = 0; ii < oldLineTb->nitems; ++ii) | |
| { | |
| if (oldLineTb->item[ii].line == 0) | |
| { /* function entry found. */ | |
| if (function_count >= fentry_size) | |
| { /* make sure you have room. */ | |
| fentry_size *= 2; | |
| fentry = (struct linetable_entry *) | |
| xrealloc (fentry, fentry_size * sizeof (struct linetable_entry)); | |
| } | |
| fentry[function_count].line = ii; | |
| fentry[function_count].pc = oldLineTb->item[ii].pc; | |
| ++function_count; | |
| } | |
| } | |
| if (function_count == 0) | |
| { | |
| xfree (fentry); | |
| return oldLineTb; | |
| } | |
| else if (function_count > 1) | |
| qsort (fentry, function_count, sizeof (struct linetable_entry), compare_lte); | |
| /* allocate a new line table. */ | |
| newLineTb = (struct linetable *) | |
| xmalloc | |
| (sizeof (struct linetable) + | |
| (oldLineTb->nitems - function_count) * sizeof (struct linetable_entry)); | |
| /* if line table does not start with a function beginning, copy up until | |
| a function begin. */ | |
| newline = 0; | |
| if (oldLineTb->item[0].line != 0) | |
| for (newline = 0; | |
| newline < oldLineTb->nitems && oldLineTb->item[newline].line; ++newline) | |
| newLineTb->item[newline] = oldLineTb->item[newline]; | |
| /* Now copy function lines one by one. */ | |
| for (ii = 0; ii < function_count; ++ii) | |
| { | |
| for (jj = fentry[ii].line + 1; | |
| jj < oldLineTb->nitems && oldLineTb->item[jj].line != 0; | |
| ++jj, ++newline) | |
| newLineTb->item[newline] = oldLineTb->item[jj]; | |
| } | |
| xfree (fentry); | |
| newLineTb->nitems = oldLineTb->nitems - function_count; | |
| return newLineTb; | |
| } | |
| /* include file support: C_BINCL/C_EINCL pairs will be kept in the | |
| following `IncludeChain'. At the end of each symtab (end_symtab), | |
| we will determine if we should create additional symtab's to | |
| represent if (the include files. */ | |
| typedef struct _inclTable | |
| { | |
| char *name; /* include filename */ | |
| /* Offsets to the line table. end points to the last entry which is | |
| part of this include file. */ | |
| int begin, end; | |
| struct subfile *subfile; | |
| unsigned funStartLine; /* start line # of its function */ | |
| } | |
| InclTable; | |
| #define INITIAL_INCLUDE_TABLE_LENGTH 20 | |
| static InclTable *inclTable; /* global include table */ | |
| static int inclIndx; /* last entry to table */ | |
| static int inclLength; /* table length */ | |
| static int inclDepth; /* nested include depth */ | |
| static void allocate_include_entry (void); | |
| static void | |
| record_include_begin (struct coff_symbol *cs) | |
| { | |
| if (inclDepth) | |
| { | |
| /* In xcoff, we assume include files cannot be nested (not in .c files | |
| of course, but in corresponding .s files.). */ | |
| /* This can happen with old versions of GCC. | |
| GCC 2.3.3-930426 does not exhibit this on a test case which | |
| a user said produced the message for him. */ | |
| complaint (&symfile_complaints, _("Nested C_BINCL symbols")); | |
| } | |
| ++inclDepth; | |
| allocate_include_entry (); | |
| inclTable[inclIndx].name = cs->c_name; | |
| inclTable[inclIndx].begin = cs->c_value; | |
| } | |
| static void | |
| record_include_end (struct coff_symbol *cs) | |
| { | |
| InclTable *pTbl; | |
| if (inclDepth == 0) | |
| { | |
| complaint (&symfile_complaints, _("Mismatched C_BINCL/C_EINCL pair")); | |
| } | |
| allocate_include_entry (); | |
| pTbl = &inclTable[inclIndx]; | |
| pTbl->end = cs->c_value; | |
| --inclDepth; | |
| ++inclIndx; | |
| } | |
| static void | |
| allocate_include_entry (void) | |
| { | |
| if (inclTable == NULL) | |
| { | |
| inclTable = (InclTable *) | |
| xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH); | |
| memset (inclTable, | |
| '\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH); | |
| inclLength = INITIAL_INCLUDE_TABLE_LENGTH; | |
| inclIndx = 0; | |
| } | |
| else if (inclIndx >= inclLength) | |
| { | |
| inclLength += INITIAL_INCLUDE_TABLE_LENGTH; | |
| inclTable = (InclTable *) | |
| xrealloc (inclTable, sizeof (InclTable) * inclLength); | |
| memset (inclTable + inclLength - INITIAL_INCLUDE_TABLE_LENGTH, | |
| '\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH); | |
| } | |
| } | |
| /* Global variable to pass the psymtab down to all the routines involved | |
| in psymtab to symtab processing. */ | |
| static struct partial_symtab *this_symtab_psymtab; | |
| /* given the start and end addresses of a compilation unit (or a csect, | |
| at times) process its lines and create appropriate line vectors. */ | |
| static void | |
| process_linenos (CORE_ADDR start, CORE_ADDR end) | |
| { | |
| int offset, ii; | |
| file_ptr max_offset = | |
| ((struct coff_symfile_info *) this_symtab_psymtab->objfile->deprecated_sym_private) | |
| ->max_lineno_offset; | |
| /* subfile structure for the main compilation unit. */ | |
| struct subfile main_subfile; | |
| /* In the main source file, any time we see a function entry, we | |
| reset this variable to function's absolute starting line number. | |
| All the following line numbers in the function are relative to | |
| this, and we record absolute line numbers in record_line(). */ | |
| unsigned int main_source_baseline = 0; | |
| unsigned *firstLine; | |
| offset = | |
| ((struct symloc *) this_symtab_psymtab->read_symtab_private)->lineno_off; | |
| if (offset == 0) | |
| goto return_after_cleanup; | |
| memset (&main_subfile, '\0', sizeof (main_subfile)); | |
| if (inclIndx == 0) | |
| /* All source lines were in the main source file. None in include files. */ | |
| enter_line_range (&main_subfile, offset, 0, start, end, | |
| &main_source_baseline); | |
| else | |
| { | |
| /* There was source with line numbers in include files. */ | |
| int linesz = | |
| coff_data (this_symtab_psymtab->objfile->obfd)->local_linesz; | |
| main_source_baseline = 0; | |
| for (ii = 0; ii < inclIndx; ++ii) | |
| { | |
| struct subfile *tmpSubfile; | |
| /* If there is main file source before include file, enter it. */ | |
| if (offset < inclTable[ii].begin) | |
| { | |
| enter_line_range | |
| (&main_subfile, offset, inclTable[ii].begin - linesz, | |
| start, 0, &main_source_baseline); | |
| } | |
| /* Have a new subfile for the include file. */ | |
| tmpSubfile = inclTable[ii].subfile = | |
| (struct subfile *) xmalloc (sizeof (struct subfile)); | |
| memset (tmpSubfile, '\0', sizeof (struct subfile)); | |
| firstLine = &(inclTable[ii].funStartLine); | |
| /* Enter include file's lines now. */ | |
| enter_line_range (tmpSubfile, inclTable[ii].begin, | |
| inclTable[ii].end, start, 0, firstLine); | |
| if (offset <= inclTable[ii].end) | |
| offset = inclTable[ii].end + linesz; | |
| } | |
| /* All the include files' line have been processed at this point. Now, | |
| enter remaining lines of the main file, if any left. */ | |
| if (offset < max_offset + 1 - linesz) | |
| { | |
| enter_line_range (&main_subfile, offset, 0, start, end, | |
| &main_source_baseline); | |
| } | |
| } | |
| /* Process main file's line numbers. */ | |
| if (main_subfile.line_vector) | |
| { | |
| struct linetable *lineTb, *lv; | |
| lv = main_subfile.line_vector; | |
| /* Line numbers are not necessarily ordered. xlc compilation will | |
| put static function to the end. */ | |
| lineTb = arrange_linetable (lv); | |
| if (lv == lineTb) | |
| { | |
| current_subfile->line_vector = (struct linetable *) | |
| xrealloc (lv, (sizeof (struct linetable) | |
| + lv->nitems * sizeof (struct linetable_entry))); | |
| } | |
| else | |
| { | |
| xfree (lv); | |
| current_subfile->line_vector = lineTb; | |
| } | |
| current_subfile->line_vector_length = | |
| current_subfile->line_vector->nitems; | |
| } | |
| /* Now, process included files' line numbers. */ | |
| for (ii = 0; ii < inclIndx; ++ii) | |
| { | |
| if ((inclTable[ii].subfile)->line_vector) /* Useless if!!! FIXMEmgo */ | |
| { | |
| struct linetable *lineTb, *lv; | |
| lv = (inclTable[ii].subfile)->line_vector; | |
| /* Line numbers are not necessarily ordered. xlc compilation will | |
| put static function to the end. */ | |
| lineTb = arrange_linetable (lv); | |
| push_subfile (); | |
| /* For the same include file, we might want to have more than one | |
| subfile. This happens if we have something like: | |
| ...... | |
| #include "foo.h" | |
| ...... | |
| #include "foo.h" | |
| ...... | |
| while foo.h including code in it. (stupid but possible) | |
| Since start_subfile() looks at the name and uses an | |
| existing one if finds, we need to provide a fake name and | |
| fool it. */ | |
| #if 0 | |
| start_subfile (inclTable[ii].name, (char *) 0); | |
| #else | |
| { | |
| /* Pick a fake name that will produce the same results as this | |
| one when passed to deduce_language_from_filename. Kludge on | |
| top of kludge. */ | |
| char *fakename = strrchr (inclTable[ii].name, '.'); | |
| if (fakename == NULL) | |
| fakename = " ?"; | |
| start_subfile (fakename, (char *) 0); | |
| xfree (current_subfile->name); | |
| } | |
| current_subfile->name = xstrdup (inclTable[ii].name); | |
| #endif | |
| if (lv == lineTb) | |
| { | |
| current_subfile->line_vector = | |
| (struct linetable *) xrealloc | |
| (lv, (sizeof (struct linetable) | |
| + lv->nitems * sizeof (struct linetable_entry))); | |
| } | |
| else | |
| { | |
| xfree (lv); | |
| current_subfile->line_vector = lineTb; | |
| } | |
| current_subfile->line_vector_length = | |
| current_subfile->line_vector->nitems; | |
| start_subfile (pop_subfile (), (char *) 0); | |
| } | |
| } | |
| return_after_cleanup: | |
| /* We don't want to keep alloc/free'ing the global include file table. */ | |
| inclIndx = 0; | |
| /* Start with a fresh subfile structure for the next file. */ | |
| memset (&main_subfile, '\0', sizeof (struct subfile)); | |
| } | |
| static void | |
| aix_process_linenos (void) | |
| { | |
| /* process line numbers and enter them into line vector */ | |
| process_linenos (last_source_start_addr, cur_src_end_addr); | |
| } | |
| /* Enter a given range of lines into the line vector. | |
| can be called in the following two ways: | |
| enter_line_range (subfile, beginoffset, endoffset, startaddr, 0, firstLine) or | |
| enter_line_range (subfile, beginoffset, 0, startaddr, endaddr, firstLine) | |
| endoffset points to the last line table entry that we should pay | |
| attention to. */ | |
| static void | |
| enter_line_range (struct subfile *subfile, unsigned beginoffset, unsigned endoffset, /* offsets to line table */ | |
| CORE_ADDR startaddr, /* offsets to line table */ | |
| CORE_ADDR endaddr, unsigned *firstLine) | |
| { | |
| unsigned int curoffset; | |
| CORE_ADDR addr; | |
| void *ext_lnno; | |
| struct internal_lineno int_lnno; | |
| unsigned int limit_offset; | |
| bfd *abfd; | |
| int linesz; | |
| if (endoffset == 0 && startaddr == 0 && endaddr == 0) | |
| return; | |
| curoffset = beginoffset; | |
| limit_offset = | |
| ((struct coff_symfile_info *) this_symtab_psymtab->objfile->deprecated_sym_private) | |
| ->max_lineno_offset; | |
| if (endoffset != 0) | |
| { | |
| if (endoffset >= limit_offset) | |
| { | |
| complaint (&symfile_complaints, | |
| _("Bad line table offset in C_EINCL directive")); | |
| return; | |
| } | |
| limit_offset = endoffset; | |
| } | |
| else | |
| limit_offset -= 1; | |
| abfd = this_symtab_psymtab->objfile->obfd; | |
| linesz = coff_data (abfd)->local_linesz; | |
| ext_lnno = alloca (linesz); | |
| while (curoffset <= limit_offset) | |
| { | |
| bfd_seek (abfd, curoffset, SEEK_SET); | |
| bfd_bread (ext_lnno, linesz, abfd); | |
| bfd_coff_swap_lineno_in (abfd, ext_lnno, &int_lnno); | |
| /* Find the address this line represents. */ | |
| addr = (int_lnno.l_lnno | |
| ? int_lnno.l_addr.l_paddr | |
| : read_symbol_nvalue (int_lnno.l_addr.l_symndx)); | |
| addr += ANOFFSET (this_symtab_psymtab->objfile->section_offsets, | |
| SECT_OFF_TEXT (this_symtab_psymtab->objfile)); | |
| if (addr < startaddr || (endaddr && addr >= endaddr)) | |
| return; | |
| if (int_lnno.l_lnno == 0) | |
| { | |
| *firstLine = read_symbol_lineno (int_lnno.l_addr.l_symndx); | |
| record_line (subfile, 0, addr); | |
| --(*firstLine); | |
| } | |
| else | |
| record_line (subfile, *firstLine + int_lnno.l_lnno, addr); | |
| curoffset += linesz; | |
| } | |
| } | |
| /* Save the vital information for use when closing off the current file. | |
| NAME is the file name the symbols came from, START_ADDR is the first | |
| text address for the file, and SIZE is the number of bytes of text. */ | |
| #define complete_symtab(name, start_addr) { \ | |
| last_source_file = savestring (name, strlen (name)); \ | |
| last_source_start_addr = start_addr; \ | |
| } | |
| /* Refill the symbol table input buffer | |
| and set the variables that control fetching entries from it. | |
| Reports an error if no data available. | |
| This function can read past the end of the symbol table | |
| (into the string table) but this does no harm. */ | |
| /* Reading symbol table has to be fast! Keep the followings as macros, rather | |
| than functions. */ | |
| #define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, SECTION, OBJFILE) \ | |
| { \ | |
| char *namestr; \ | |
| namestr = (NAME); \ | |
| if (namestr[0] == '.') ++namestr; \ | |
| prim_record_minimal_symbol_and_info (namestr, (ADDR), (TYPE), \ | |
| (char *)NULL, (SECTION), (asection *)NULL, (OBJFILE)); \ | |
| misc_func_recorded = 1; \ | |
| } | |
| /* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be | |
| nested. At any given time, a symbol can only be in one static block. | |
| This is the base address of current static block, zero if non exists. */ | |
| static int static_block_base = 0; | |
| /* Section number for the current static block. */ | |
| static int static_block_section = -1; | |
| /* true if space for symbol name has been allocated. */ | |
| static int symname_alloced = 0; | |
| /* Next symbol to read. Pointer into raw seething symbol table. */ | |
| static char *raw_symbol; | |
| /* This is the function which stabsread.c calls to get symbol | |
| continuations. */ | |
| static char * | |
| xcoff_next_symbol_text (struct objfile *objfile) | |
| { | |
| struct internal_syment symbol; | |
| char *retval; | |
| /* FIXME: is this the same as the passed arg? */ | |
| if (this_symtab_psymtab) | |
| objfile = this_symtab_psymtab->objfile; | |
| bfd_coff_swap_sym_in (objfile->obfd, raw_symbol, &symbol); | |
| if (symbol.n_zeroes) | |
| { | |
| complaint (&symfile_complaints, _("Unexpected symbol continuation")); | |
| /* Return something which points to '\0' and hope the symbol reading | |
| code does something reasonable. */ | |
| retval = ""; | |
| } | |
| else if (symbol.n_sclass & 0x80) | |
| { | |
| retval = | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->debugsec | |
| + symbol.n_offset; | |
| raw_symbol += | |
| coff_data (objfile->obfd)->local_symesz; | |
| ++symnum; | |
| } | |
| else | |
| { | |
| complaint (&symfile_complaints, _("Unexpected symbol continuation")); | |
| /* Return something which points to '\0' and hope the symbol reading | |
| code does something reasonable. */ | |
| retval = ""; | |
| } | |
| return retval; | |
| } | |
| /* Read symbols for a given partial symbol table. */ | |
| static void | |
| read_xcoff_symtab (struct partial_symtab *pst) | |
| { | |
| struct objfile *objfile = pst->objfile; | |
| bfd *abfd = objfile->obfd; | |
| char *raw_auxptr; /* Pointer to first raw aux entry for sym */ | |
| char *strtbl = ((struct coff_symfile_info *) objfile->deprecated_sym_private)->strtbl; | |
| char *debugsec = | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->debugsec; | |
| char *debugfmt = bfd_xcoff_is_xcoff64 (abfd) ? "XCOFF64" : "XCOFF"; | |
| struct internal_syment symbol[1]; | |
| union internal_auxent main_aux; | |
| struct coff_symbol cs[1]; | |
| CORE_ADDR file_start_addr = 0; | |
| CORE_ADDR file_end_addr = 0; | |
| int next_file_symnum = -1; | |
| unsigned int max_symnum; | |
| int just_started = 1; | |
| int depth = 0; | |
| int fcn_start_addr = 0; | |
| struct coff_symbol fcn_stab_saved = { 0 }; | |
| /* fcn_cs_saved is global because process_xcoff_symbol needs it. */ | |
| union internal_auxent fcn_aux_saved; | |
| struct context_stack *new; | |
| char *filestring = " _start_ "; /* Name of the current file. */ | |
| char *last_csect_name; /* last seen csect's name and value */ | |
| CORE_ADDR last_csect_val; | |
| int last_csect_sec; | |
| this_symtab_psymtab = pst; | |
| /* Get the appropriate COFF "constants" related to the file we're | |
| handling. */ | |
| local_symesz = coff_data (abfd)->local_symesz; | |
| last_source_file = NULL; | |
| last_csect_name = 0; | |
| last_csect_val = 0; | |
| start_stabs (); | |
| start_symtab (filestring, (char *) NULL, file_start_addr); | |
| record_debugformat (debugfmt); | |
| symnum = ((struct symloc *) pst->read_symtab_private)->first_symnum; | |
| max_symnum = | |
| symnum + ((struct symloc *) pst->read_symtab_private)->numsyms; | |
| first_object_file_end = 0; | |
| raw_symbol = | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->symtbl | |
| + symnum * local_symesz; | |
| while (symnum < max_symnum) | |
| { | |
| QUIT; /* make this command interruptable. */ | |
| /* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */ | |
| /* read one symbol into `cs' structure. After processing the | |
| whole symbol table, only string table will be kept in memory, | |
| symbol table and debug section of xcoff will be freed. Thus | |
| we can mark symbols with names in string table as | |
| `alloced'. */ | |
| { | |
| int ii; | |
| /* Swap and align the symbol into a reasonable C structure. */ | |
| bfd_coff_swap_sym_in (abfd, raw_symbol, symbol); | |
| cs->c_symnum = symnum; | |
| cs->c_naux = symbol->n_numaux; | |
| if (symbol->n_zeroes) | |
| { | |
| symname_alloced = 0; | |
| /* We must use the original, unswapped, name here so the name field | |
| pointed to by cs->c_name will persist throughout xcoffread. If | |
| we use the new field, it gets overwritten for each symbol. */ | |
| cs->c_name = ((struct external_syment *) raw_symbol)->e.e_name; | |
| /* If it's exactly E_SYMNMLEN characters long it isn't | |
| '\0'-terminated. */ | |
| if (cs->c_name[E_SYMNMLEN - 1] != '\0') | |
| { | |
| char *p; | |
| p = obstack_alloc (&objfile->objfile_obstack, E_SYMNMLEN + 1); | |
| strncpy (p, cs->c_name, E_SYMNMLEN); | |
| p[E_SYMNMLEN] = '\0'; | |
| cs->c_name = p; | |
| symname_alloced = 1; | |
| } | |
| } | |
| else if (symbol->n_sclass & 0x80) | |
| { | |
| cs->c_name = debugsec + symbol->n_offset; | |
| symname_alloced = 0; | |
| } | |
| else | |
| { | |
| /* in string table */ | |
| cs->c_name = strtbl + (int) symbol->n_offset; | |
| symname_alloced = 1; | |
| } | |
| cs->c_value = symbol->n_value; | |
| cs->c_sclass = symbol->n_sclass; | |
| cs->c_secnum = symbol->n_scnum; | |
| cs->c_type = (unsigned) symbol->n_type; | |
| raw_symbol += local_symesz; | |
| ++symnum; | |
| /* Save addr of first aux entry. */ | |
| raw_auxptr = raw_symbol; | |
| /* Skip all the auxents associated with this symbol. */ | |
| for (ii = symbol->n_numaux; ii; --ii) | |
| { | |
| raw_symbol += coff_data (abfd)->local_auxesz; | |
| ++symnum; | |
| } | |
| } | |
| /* if symbol name starts with ".$" or "$", ignore it. */ | |
| if (cs->c_name[0] == '$' | |
| || (cs->c_name[1] == '$' && cs->c_name[0] == '.')) | |
| continue; | |
| if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE) | |
| { | |
| if (last_source_file) | |
| { | |
| pst->symtab = | |
| end_symtab (cur_src_end_addr, objfile, SECT_OFF_TEXT (objfile)); | |
| end_stabs (); | |
| } | |
| start_stabs (); | |
| start_symtab ("_globals_", (char *) NULL, (CORE_ADDR) 0); | |
| record_debugformat (debugfmt); | |
| cur_src_end_addr = first_object_file_end; | |
| /* done with all files, everything from here on is globals */ | |
| } | |
| if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT) | |
| && cs->c_naux == 1) | |
| { | |
| /* Dealing with a symbol with a csect entry. */ | |
| #define CSECT(PP) ((PP)->x_csect) | |
| #define CSECT_LEN(PP) (CSECT(PP).x_scnlen.l) | |
| #define CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp)) | |
| #define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp)) | |
| #define CSECT_SCLAS(PP) (CSECT(PP).x_smclas) | |
| /* Convert the auxent to something we can access. */ | |
| bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, | |
| 0, cs->c_naux, &main_aux); | |
| switch (CSECT_SMTYP (&main_aux)) | |
| { | |
| case XTY_ER: | |
| /* Ignore all external references. */ | |
| continue; | |
| case XTY_SD: | |
| /* A section description. */ | |
| { | |
| switch (CSECT_SCLAS (&main_aux)) | |
| { | |
| case XMC_PR: | |
| { | |
| /* A program csect is seen. We have to allocate one | |
| symbol table for each program csect. Normally gdb | |
| prefers one symtab for each source file. In case | |
| of AIX, one source file might include more than one | |
| [PR] csect, and they don't have to be adjacent in | |
| terms of the space they occupy in memory. Thus, one | |
| single source file might get fragmented in the | |
| memory and gdb's file start and end address | |
| approach does not work! GCC (and I think xlc) seem | |
| to put all the code in the unnamed program csect. */ | |
| if (last_csect_name) | |
| { | |
| complete_symtab (filestring, file_start_addr); | |
| cur_src_end_addr = file_end_addr; | |
| end_symtab (file_end_addr, objfile, SECT_OFF_TEXT (objfile)); | |
| end_stabs (); | |
| start_stabs (); | |
| /* Give all csects for this source file the same | |
| name. */ | |
| start_symtab (filestring, NULL, (CORE_ADDR) 0); | |
| record_debugformat (debugfmt); | |
| } | |
| /* If this is the very first csect seen, | |
| basically `__start'. */ | |
| if (just_started) | |
| { | |
| first_object_file_end | |
| = cs->c_value + CSECT_LEN (&main_aux); | |
| just_started = 0; | |
| } | |
| file_start_addr = | |
| cs->c_value + ANOFFSET (objfile->section_offsets, | |
| SECT_OFF_TEXT (objfile)); | |
| file_end_addr = file_start_addr + CSECT_LEN (&main_aux); | |
| if (cs->c_name && (cs->c_name[0] == '.' | |
| || cs->c_name[0] == '@')) | |
| { | |
| last_csect_name = cs->c_name; | |
| last_csect_val = cs->c_value; | |
| last_csect_sec = secnum_to_section (cs->c_secnum, objfile); | |
| } | |
| } | |
| continue; | |
| /* All other symbols are put into the minimal symbol | |
| table only. */ | |
| case XMC_RW: | |
| continue; | |
| case XMC_TC0: | |
| continue; | |
| case XMC_TC: | |
| continue; | |
| default: | |
| /* Ignore the symbol. */ | |
| continue; | |
| } | |
| } | |
| break; | |
| case XTY_LD: | |
| switch (CSECT_SCLAS (&main_aux)) | |
| { | |
| case XMC_PR: | |
| /* a function entry point. */ | |
| function_entry_point: | |
| fcn_start_addr = cs->c_value; | |
| /* save the function header info, which will be used | |
| when `.bf' is seen. */ | |
| fcn_cs_saved = *cs; | |
| fcn_aux_saved = main_aux; | |
| continue; | |
| case XMC_GL: | |
| /* shared library function trampoline code entry point. */ | |
| continue; | |
| case XMC_DS: | |
| /* The symbols often have the same names as debug symbols for | |
| functions, and confuse lookup_symbol. */ | |
| continue; | |
| default: | |
| /* xlc puts each variable in a separate csect, so we get | |
| an XTY_SD for each variable. But gcc puts several | |
| variables in a csect, so that each variable only gets | |
| an XTY_LD. This will typically be XMC_RW; I suspect | |
| XMC_RO and XMC_BS might be possible too. | |
| These variables are put in the minimal symbol table | |
| only. */ | |
| continue; | |
| } | |
| break; | |
| case XTY_CM: | |
| /* Common symbols are put into the minimal symbol table only. */ | |
| continue; | |
| default: | |
| break; | |
| } | |
| } | |
| /* If explicitly specified as a function, treat is as one. This check | |
| evaluates to true for @FIX* bigtoc CSECT symbols, so it must occur | |
| after the above CSECT check. */ | |
| if (ISFCN (cs->c_type) && cs->c_sclass != C_TPDEF) | |
| { | |
| bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, | |
| 0, cs->c_naux, &main_aux); | |
| goto function_entry_point; | |
| } | |
| switch (cs->c_sclass) | |
| { | |
| case C_FILE: | |
| /* c_value field contains symnum of next .file entry in table | |
| or symnum of first global after last .file. */ | |
| next_file_symnum = cs->c_value; | |
| /* Complete symbol table for last object file containing | |
| debugging information. */ | |
| /* Whether or not there was a csect in the previous file, we | |
| have to call `end_stabs' and `start_stabs' to reset | |
| type_vector, line_vector, etc. structures. */ | |
| complete_symtab (filestring, file_start_addr); | |
| cur_src_end_addr = file_end_addr; | |
| end_symtab (file_end_addr, objfile, SECT_OFF_TEXT (objfile)); | |
| end_stabs (); | |
| /* XCOFF, according to the AIX 3.2 documentation, puts the filename | |
| in cs->c_name. But xlc 1.3.0.2 has decided to do things the | |
| standard COFF way and put it in the auxent. We use the auxent if | |
| the symbol is ".file" and an auxent exists, otherwise use the symbol | |
| itself. Simple enough. */ | |
| if (!strcmp (cs->c_name, ".file") && cs->c_naux > 0) | |
| { | |
| bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, | |
| 0, cs->c_naux, &main_aux); | |
| filestring = coff_getfilename (&main_aux, objfile); | |
| } | |
| else | |
| filestring = cs->c_name; | |
| start_stabs (); | |
| start_symtab (filestring, (char *) NULL, (CORE_ADDR) 0); | |
| record_debugformat (debugfmt); | |
| last_csect_name = 0; | |
| /* reset file start and end addresses. A compilation unit with no text | |
| (only data) should have zero file boundaries. */ | |
| file_start_addr = file_end_addr = 0; | |
| break; | |
| case C_FUN: | |
| fcn_stab_saved = *cs; | |
| break; | |
| case C_FCN: | |
| if (strcmp (cs->c_name, ".bf") == 0) | |
| { | |
| CORE_ADDR off = ANOFFSET (objfile->section_offsets, | |
| SECT_OFF_TEXT (objfile)); | |
| bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, | |
| 0, cs->c_naux, &main_aux); | |
| within_function = 1; | |
| new = push_context (0, fcn_start_addr + off); | |
| new->name = define_symbol | |
| (fcn_cs_saved.c_value + off, | |
| fcn_stab_saved.c_name, 0, 0, objfile); | |
| if (new->name != NULL) | |
| SYMBOL_SECTION (new->name) = SECT_OFF_TEXT (objfile); | |
| } | |
| else if (strcmp (cs->c_name, ".ef") == 0) | |
| { | |
| bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, | |
| 0, cs->c_naux, &main_aux); | |
| /* The value of .ef is the address of epilogue code; | |
| not useful for gdb. */ | |
| /* { main_aux.x_sym.x_misc.x_lnsz.x_lnno | |
| contains number of lines to '}' */ | |
| if (context_stack_depth <= 0) | |
| { /* We attempted to pop an empty context stack */ | |
| ef_complaint (cs->c_symnum); | |
| within_function = 0; | |
| break; | |
| } | |
| new = pop_context (); | |
| /* Stack must be empty now. */ | |
| if (context_stack_depth > 0 || new == NULL) | |
| { | |
| ef_complaint (cs->c_symnum); | |
| within_function = 0; | |
| break; | |
| } | |
| finish_block (new->name, &local_symbols, new->old_blocks, | |
| new->start_addr, | |
| (fcn_cs_saved.c_value | |
| + fcn_aux_saved.x_sym.x_misc.x_fsize | |
| + ANOFFSET (objfile->section_offsets, | |
| SECT_OFF_TEXT (objfile))), | |
| objfile); | |
| within_function = 0; | |
| } | |
| break; | |
| case C_BSTAT: | |
| /* Begin static block. */ | |
| { | |
| struct internal_syment symbol; | |
| read_symbol (&symbol, cs->c_value); | |
| static_block_base = symbol.n_value; | |
| static_block_section = | |
| secnum_to_section (symbol.n_scnum, objfile); | |
| } | |
| break; | |
| case C_ESTAT: | |
| /* End of static block. */ | |
| static_block_base = 0; | |
| static_block_section = -1; | |
| break; | |
| case C_ARG: | |
| case C_REGPARM: | |
| case C_REG: | |
| case C_TPDEF: | |
| case C_STRTAG: | |
| case C_UNTAG: | |
| case C_ENTAG: | |
| { | |
| complaint (&symfile_complaints, _("Unrecognized storage class %d."), | |
| cs->c_sclass); | |
| } | |
| break; | |
| case C_LABEL: | |
| case C_NULL: | |
| /* Ignore these. */ | |
| break; | |
| case C_HIDEXT: | |
| case C_STAT: | |
| break; | |
| case C_BINCL: | |
| /* beginning of include file */ | |
| /* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted | |
| order. Thus, when wee see them, we might not know enough info | |
| to process them. Thus, we'll be saving them into a table | |
| (inclTable) and postpone their processing. */ | |
| record_include_begin (cs); | |
| break; | |
| case C_EINCL: | |
| /* End of include file. */ | |
| /* See the comment after case C_BINCL. */ | |
| record_include_end (cs); | |
| break; | |
| case C_BLOCK: | |
| if (strcmp (cs->c_name, ".bb") == 0) | |
| { | |
| depth++; | |
| new = push_context (depth, | |
| (cs->c_value | |
| + ANOFFSET (objfile->section_offsets, | |
| SECT_OFF_TEXT (objfile)))); | |
| } | |
| else if (strcmp (cs->c_name, ".eb") == 0) | |
| { | |
| if (context_stack_depth <= 0) | |
| { /* We attempted to pop an empty context stack */ | |
| eb_complaint (cs->c_symnum); | |
| break; | |
| } | |
| new = pop_context (); | |
| if (depth-- != new->depth) | |
| { | |
| eb_complaint (cs->c_symnum); | |
| break; | |
| } | |
| if (local_symbols && context_stack_depth > 0) | |
| { | |
| /* Make a block for the local symbols within. */ | |
| finish_block (new->name, &local_symbols, new->old_blocks, | |
| new->start_addr, | |
| (cs->c_value | |
| + ANOFFSET (objfile->section_offsets, | |
| SECT_OFF_TEXT (objfile))), | |
| objfile); | |
| } | |
| local_symbols = new->locals; | |
| } | |
| break; | |
| default: | |
| process_xcoff_symbol (cs, objfile); | |
| break; | |
| } | |
| } | |
| if (last_source_file) | |
| { | |
| struct symtab *s; | |
| complete_symtab (filestring, file_start_addr); | |
| cur_src_end_addr = file_end_addr; | |
| s = end_symtab (file_end_addr, objfile, SECT_OFF_TEXT (objfile)); | |
| /* When reading symbols for the last C_FILE of the objfile, try | |
| to make sure that we set pst->symtab to the symtab for the | |
| file, not to the _globals_ symtab. I'm not sure whether this | |
| actually works right or when/if it comes up. */ | |
| if (pst->symtab == NULL) | |
| pst->symtab = s; | |
| end_stabs (); | |
| } | |
| } | |
| #define SYMBOL_DUP(SYMBOL1, SYMBOL2) \ | |
| (SYMBOL2) = (struct symbol *) \ | |
| obstack_alloc (&objfile->objfile_obstack, sizeof (struct symbol)); \ | |
| *(SYMBOL2) = *(SYMBOL1); | |
| #define SYMNAME_ALLOC(NAME, ALLOCED) \ | |
| (ALLOCED) ? (NAME) : obsavestring ((NAME), strlen (NAME), &objfile->objfile_obstack); | |
| /* process one xcoff symbol. */ | |
| static struct symbol * | |
| process_xcoff_symbol (struct coff_symbol *cs, struct objfile *objfile) | |
| { | |
| struct gdbarch *gdbarch = get_objfile_arch (objfile); | |
| struct symbol onesymbol; | |
| struct symbol *sym = &onesymbol; | |
| struct symbol *sym2 = NULL; | |
| char *name, *pp; | |
| int sec; | |
| CORE_ADDR off; | |
| if (cs->c_secnum < 0) | |
| { | |
| /* The value is a register number, offset within a frame, etc., | |
| and does not get relocated. */ | |
| off = 0; | |
| sec = -1; | |
| } | |
| else | |
| { | |
| sec = secnum_to_section (cs->c_secnum, objfile); | |
| off = ANOFFSET (objfile->section_offsets, sec); | |
| } | |
| name = cs->c_name; | |
| if (name[0] == '.') | |
| ++name; | |
| memset (sym, '\0', sizeof (struct symbol)); | |
| /* default assumptions */ | |
| SYMBOL_VALUE_ADDRESS (sym) = cs->c_value + off; | |
| SYMBOL_DOMAIN (sym) = VAR_DOMAIN; | |
| SYMBOL_SECTION (sym) = secnum_to_section (cs->c_secnum, objfile); | |
| if (ISFCN (cs->c_type)) | |
| { | |
| /* At this point, we don't know the type of the function. This | |
| will be patched with the type from its stab entry later on in | |
| patch_block_stabs (), unless the file was compiled without -g. */ | |
| DEPRECATED_SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced); | |
| SYMBOL_TYPE (sym) = builtin_type (gdbarch)->nodebug_text_symbol; | |
| SYMBOL_CLASS (sym) = LOC_BLOCK; | |
| SYMBOL_DUP (sym, sym2); | |
| if (cs->c_sclass == C_EXT) | |
| add_symbol_to_list (sym2, &global_symbols); | |
| else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT) | |
| add_symbol_to_list (sym2, &file_symbols); | |
| } | |
| else | |
| { | |
| /* In case we can't figure out the type, provide default. */ | |
| SYMBOL_TYPE (sym) = builtin_type (gdbarch)->nodebug_data_symbol; | |
| switch (cs->c_sclass) | |
| { | |
| #if 0 | |
| /* The values of functions and global symbols are now resolved | |
| via the global_sym_chain in stabsread.c. */ | |
| case C_FUN: | |
| if (fcn_cs_saved.c_sclass == C_EXT) | |
| add_stab_to_list (name, &global_stabs); | |
| else | |
| add_stab_to_list (name, &file_stabs); | |
| break; | |
| case C_GSYM: | |
| add_stab_to_list (name, &global_stabs); | |
| break; | |
| #endif | |
| case C_BCOMM: | |
| common_block_start (cs->c_name, objfile); | |
| break; | |
| case C_ECOMM: | |
| common_block_end (objfile); | |
| break; | |
| default: | |
| complaint (&symfile_complaints, _("Unexpected storage class: %d"), | |
| cs->c_sclass); | |
| /* FALLTHROUGH */ | |
| case C_DECL: | |
| case C_PSYM: | |
| case C_RPSYM: | |
| case C_ECOML: | |
| case C_LSYM: | |
| case C_RSYM: | |
| case C_GSYM: | |
| { | |
| sym = define_symbol (cs->c_value + off, cs->c_name, 0, 0, objfile); | |
| if (sym != NULL) | |
| { | |
| SYMBOL_SECTION (sym) = sec; | |
| } | |
| return sym; | |
| } | |
| case C_STSYM: | |
| /* For xlc (not GCC), the 'V' symbol descriptor is used for | |
| all statics and we need to distinguish file-scope versus | |
| function-scope using within_function. We do this by | |
| changing the string we pass to define_symbol to use 'S' | |
| where we need to, which is not necessarily super-clean, | |
| but seems workable enough. */ | |
| if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL) | |
| return NULL; | |
| ++pp; | |
| if (*pp == 'V' && !within_function) | |
| *pp = 'S'; | |
| sym = define_symbol ((cs->c_value | |
| + ANOFFSET (objfile->section_offsets, | |
| static_block_section)), | |
| cs->c_name, 0, 0, objfile); | |
| if (sym != NULL) | |
| { | |
| SYMBOL_VALUE_ADDRESS (sym) += static_block_base; | |
| SYMBOL_SECTION (sym) = static_block_section; | |
| } | |
| return sym; | |
| } | |
| } | |
| return sym2; | |
| } | |
| /* Extract the file name from the aux entry of a C_FILE symbol. | |
| Result is in static storage and is only good for temporary use. */ | |
| static char * | |
| coff_getfilename (union internal_auxent *aux_entry, struct objfile *objfile) | |
| { | |
| static char buffer[BUFSIZ]; | |
| if (aux_entry->x_file.x_n.x_zeroes == 0) | |
| strcpy (buffer, | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->strtbl | |
| + aux_entry->x_file.x_n.x_offset); | |
| else | |
| { | |
| strncpy (buffer, aux_entry->x_file.x_fname, FILNMLEN); | |
| buffer[FILNMLEN] = '\0'; | |
| } | |
| return (buffer); | |
| } | |
| /* Set *SYMBOL to symbol number symno in symtbl. */ | |
| static void | |
| read_symbol (struct internal_syment *symbol, int symno) | |
| { | |
| int nsyms = | |
| ((struct coff_symfile_info *) this_symtab_psymtab->objfile->deprecated_sym_private)->symtbl_num_syms; | |
| char *stbl = | |
| ((struct coff_symfile_info *) this_symtab_psymtab->objfile->deprecated_sym_private)->symtbl; | |
| if (symno < 0 || symno >= nsyms) | |
| { | |
| complaint (&symfile_complaints, _("Invalid symbol offset")); | |
| symbol->n_value = 0; | |
| symbol->n_scnum = -1; | |
| return; | |
| } | |
| bfd_coff_swap_sym_in (this_symtab_psymtab->objfile->obfd, | |
| stbl + (symno * local_symesz), | |
| symbol); | |
| } | |
| /* Get value corresponding to symbol number symno in symtbl. */ | |
| static CORE_ADDR | |
| read_symbol_nvalue (int symno) | |
| { | |
| struct internal_syment symbol[1]; | |
| read_symbol (symbol, symno); | |
| return symbol->n_value; | |
| } | |
| /* Find the address of the function corresponding to symno, where | |
| symno is the symbol pointed to by the linetable. */ | |
| static int | |
| read_symbol_lineno (int symno) | |
| { | |
| struct objfile *objfile = this_symtab_psymtab->objfile; | |
| int xcoff64 = bfd_xcoff_is_xcoff64 (objfile->obfd); | |
| struct coff_symfile_info *info = | |
| (struct coff_symfile_info *)objfile->deprecated_sym_private; | |
| int nsyms = info->symtbl_num_syms; | |
| char *stbl = info->symtbl; | |
| char *strtbl = info->strtbl; | |
| struct internal_syment symbol[1]; | |
| union internal_auxent main_aux[1]; | |
| if (symno < 0) | |
| { | |
| bf_notfound_complaint (); | |
| return 0; | |
| } | |
| /* Note that just searching for a short distance (e.g. 50 symbols) | |
| is not enough, at least in the following case. | |
| .extern foo | |
| [many .stabx entries] | |
| [a few functions, referring to foo] | |
| .globl foo | |
| .bf | |
| What happens here is that the assembler moves the .stabx entries | |
| to right before the ".bf" for foo, but the symbol for "foo" is before | |
| all the stabx entries. See PR gdb/2222. */ | |
| /* Maintaining a table of .bf entries might be preferable to this search. | |
| If I understand things correctly it would need to be done only for | |
| the duration of a single psymtab to symtab conversion. */ | |
| while (symno < nsyms) | |
| { | |
| bfd_coff_swap_sym_in (symfile_bfd, | |
| stbl + (symno * local_symesz), symbol); | |
| if (symbol->n_sclass == C_FCN) | |
| { | |
| char *name = xcoff64 ? strtbl + symbol->n_offset : symbol->n_name; | |
| if (strcmp (name, ".bf") == 0) | |
| goto gotit; | |
| } | |
| symno += symbol->n_numaux + 1; | |
| } | |
| bf_notfound_complaint (); | |
| return 0; | |
| gotit: | |
| /* take aux entry and return its lineno */ | |
| symno++; | |
| bfd_coff_swap_aux_in (objfile->obfd, stbl + symno * local_symesz, | |
| symbol->n_type, symbol->n_sclass, | |
| 0, symbol->n_numaux, main_aux); | |
| return main_aux->x_sym.x_misc.x_lnsz.x_lnno; | |
| } | |
| /* Support for line number handling */ | |
| /* This function is called for every section; it finds the outer limits | |
| * of the line table (minimum and maximum file offset) so that the | |
| * mainline code can read the whole thing for efficiency. | |
| */ | |
| static void | |
| find_linenos (struct bfd *abfd, struct bfd_section *asect, void *vpinfo) | |
| { | |
| struct coff_symfile_info *info; | |
| int size, count; | |
| file_ptr offset, maxoff; | |
| count = asect->lineno_count; | |
| if (strcmp (asect->name, ".text") != 0 || count == 0) | |
| return; | |
| size = count * coff_data (abfd)->local_linesz; | |
| info = (struct coff_symfile_info *) vpinfo; | |
| offset = asect->line_filepos; | |
| maxoff = offset + size; | |
| if (offset < info->min_lineno_offset || info->min_lineno_offset == 0) | |
| info->min_lineno_offset = offset; | |
| if (maxoff > info->max_lineno_offset) | |
| info->max_lineno_offset = maxoff; | |
| } | |
| static void xcoff_psymtab_to_symtab_1 (struct partial_symtab *); | |
| static void | |
| xcoff_psymtab_to_symtab_1 (struct partial_symtab *pst) | |
| { | |
| struct cleanup *old_chain; | |
| int i; | |
| if (!pst) | |
| return; | |
| if (pst->readin) | |
| { | |
| fprintf_unfiltered | |
| (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n", | |
| pst->filename); | |
| return; | |
| } | |
| /* Read in all partial symtabs on which this one is dependent */ | |
| for (i = 0; i < pst->number_of_dependencies; i++) | |
| if (!pst->dependencies[i]->readin) | |
| { | |
| /* Inform about additional files that need to be read in. */ | |
| if (info_verbose) | |
| { | |
| fputs_filtered (" ", gdb_stdout); | |
| wrap_here (""); | |
| fputs_filtered ("and ", gdb_stdout); | |
| wrap_here (""); | |
| printf_filtered ("%s...", pst->dependencies[i]->filename); | |
| wrap_here (""); /* Flush output */ | |
| gdb_flush (gdb_stdout); | |
| } | |
| xcoff_psymtab_to_symtab_1 (pst->dependencies[i]); | |
| } | |
| if (((struct symloc *) pst->read_symtab_private)->numsyms != 0) | |
| { | |
| /* Init stuff necessary for reading in symbols. */ | |
| stabsread_init (); | |
| buildsym_init (); | |
| old_chain = make_cleanup (really_free_pendings, 0); | |
| read_xcoff_symtab (pst); | |
| do_cleanups (old_chain); | |
| } | |
| pst->readin = 1; | |
| } | |
| static void xcoff_psymtab_to_symtab (struct partial_symtab *); | |
| /* Read in all of the symbols for a given psymtab for real. | |
| Be verbose about it if the user wants that. */ | |
| static void | |
| xcoff_psymtab_to_symtab (struct partial_symtab *pst) | |
| { | |
| bfd *sym_bfd; | |
| if (!pst) | |
| return; | |
| if (pst->readin) | |
| { | |
| fprintf_unfiltered | |
| (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n", | |
| pst->filename); | |
| return; | |
| } | |
| if (((struct symloc *) pst->read_symtab_private)->numsyms != 0 | |
| || pst->number_of_dependencies) | |
| { | |
| /* Print the message now, before reading the string table, | |
| to avoid disconcerting pauses. */ | |
| if (info_verbose) | |
| { | |
| printf_filtered ("Reading in symbols for %s...", pst->filename); | |
| gdb_flush (gdb_stdout); | |
| } | |
| sym_bfd = pst->objfile->obfd; | |
| next_symbol_text_func = xcoff_next_symbol_text; | |
| xcoff_psymtab_to_symtab_1 (pst); | |
| /* Match with global symbols. This only needs to be done once, | |
| after all of the symtabs and dependencies have been read in. */ | |
| scan_file_globals (pst->objfile); | |
| /* Finish up the debug error message. */ | |
| if (info_verbose) | |
| printf_filtered ("done.\n"); | |
| } | |
| } | |
| static void | |
| xcoff_new_init (struct objfile *objfile) | |
| { | |
| stabsread_new_init (); | |
| buildsym_new_init (); | |
| } | |
| /* Do initialization in preparation for reading symbols from OBJFILE. | |
| We will only be called if this is an XCOFF or XCOFF-like file. | |
| BFD handles figuring out the format of the file, and code in symfile.c | |
| uses BFD's determination to vector to us. */ | |
| static void | |
| xcoff_symfile_init (struct objfile *objfile) | |
| { | |
| /* Allocate struct to keep track of the symfile */ | |
| objfile->deprecated_sym_private = xmalloc (sizeof (struct coff_symfile_info)); | |
| /* XCOFF objects may be reordered, so set OBJF_REORDERED. If we | |
| find this causes a significant slowdown in gdb then we could | |
| set it in the debug symbol readers only when necessary. */ | |
| objfile->flags |= OBJF_REORDERED; | |
| init_entry_point_info (objfile); | |
| } | |
| /* Perform any local cleanups required when we are done with a particular | |
| objfile. I.E, we are in the process of discarding all symbol information | |
| for an objfile, freeing up all memory held for it, and unlinking the | |
| objfile struct from the global list of known objfiles. */ | |
| static void | |
| xcoff_symfile_finish (struct objfile *objfile) | |
| { | |
| if (objfile->deprecated_sym_private != NULL) | |
| { | |
| xfree (objfile->deprecated_sym_private); | |
| } | |
| /* Start with a fresh include table for the next objfile. */ | |
| if (inclTable) | |
| { | |
| xfree (inclTable); | |
| inclTable = NULL; | |
| } | |
| inclIndx = inclLength = inclDepth = 0; | |
| } | |
| static void | |
| init_stringtab (bfd *abfd, file_ptr offset, struct objfile *objfile) | |
| { | |
| long length; | |
| int val; | |
| unsigned char lengthbuf[4]; | |
| char *strtbl; | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->strtbl = NULL; | |
| if (bfd_seek (abfd, offset, SEEK_SET) < 0) | |
| error (_("cannot seek to string table in %s: %s"), | |
| bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ())); | |
| val = bfd_bread ((char *) lengthbuf, sizeof lengthbuf, abfd); | |
| length = bfd_h_get_32 (abfd, lengthbuf); | |
| /* If no string table is needed, then the file may end immediately | |
| after the symbols. Just return with `strtbl' set to NULL. */ | |
| if (val != sizeof lengthbuf || length < sizeof lengthbuf) | |
| return; | |
| /* Allocate string table from objfile_obstack. We will need this table | |
| as long as we have its symbol table around. */ | |
| strtbl = (char *) obstack_alloc (&objfile->objfile_obstack, length); | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->strtbl = strtbl; | |
| /* Copy length buffer, the first byte is usually zero and is | |
| used for stabs with a name length of zero. */ | |
| memcpy (strtbl, lengthbuf, sizeof lengthbuf); | |
| if (length == sizeof lengthbuf) | |
| return; | |
| val = bfd_bread (strtbl + sizeof lengthbuf, length - sizeof lengthbuf, abfd); | |
| if (val != length - sizeof lengthbuf) | |
| error (_("cannot read string table from %s: %s"), | |
| bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ())); | |
| if (strtbl[length - 1] != '\0') | |
| error (_("bad symbol file: string table does not end with null character")); | |
| return; | |
| } | |
| /* If we have not yet seen a function for this psymtab, this is 0. If we | |
| have seen one, it is the offset in the line numbers of the line numbers | |
| for the psymtab. */ | |
| static unsigned int first_fun_line_offset; | |
| static struct partial_symtab *xcoff_start_psymtab | |
| (struct objfile *, char *, int, | |
| struct partial_symbol **, struct partial_symbol **); | |
| /* Allocate and partially fill a partial symtab. It will be | |
| completely filled at the end of the symbol list. | |
| SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR | |
| is the address relative to which its symbols are (incremental) or 0 | |
| (normal). */ | |
| static struct partial_symtab * | |
| xcoff_start_psymtab (struct objfile *objfile, char *filename, int first_symnum, | |
| struct partial_symbol **global_syms, | |
| struct partial_symbol **static_syms) | |
| { | |
| struct partial_symtab *result = | |
| start_psymtab_common (objfile, objfile->section_offsets, | |
| filename, | |
| /* We fill in textlow later. */ | |
| 0, | |
| global_syms, static_syms); | |
| result->read_symtab_private = (char *) | |
| obstack_alloc (&objfile->objfile_obstack, sizeof (struct symloc)); | |
| ((struct symloc *) result->read_symtab_private)->first_symnum = first_symnum; | |
| result->read_symtab = xcoff_psymtab_to_symtab; | |
| /* Deduce the source language from the filename for this psymtab. */ | |
| psymtab_language = deduce_language_from_filename (filename); | |
| return result; | |
| } | |
| static struct partial_symtab *xcoff_end_psymtab | |
| (struct partial_symtab *, char **, int, int, | |
| struct partial_symtab **, int, int); | |
| /* Close off the current usage of PST. | |
| Returns PST, or NULL if the partial symtab was empty and thrown away. | |
| CAPPING_SYMBOL_NUMBER is the end of pst (exclusive). | |
| INCLUDE_LIST, NUM_INCLUDES, DEPENDENCY_LIST, and NUMBER_DEPENDENCIES | |
| are the information for includes and dependencies. */ | |
| static struct partial_symtab * | |
| xcoff_end_psymtab (struct partial_symtab *pst, char **include_list, | |
| int num_includes, int capping_symbol_number, | |
| struct partial_symtab **dependency_list, | |
| int number_dependencies, int textlow_not_set) | |
| { | |
| int i; | |
| struct objfile *objfile = pst->objfile; | |
| if (capping_symbol_number != -1) | |
| ((struct symloc *) pst->read_symtab_private)->numsyms = | |
| capping_symbol_number | |
| - ((struct symloc *) pst->read_symtab_private)->first_symnum; | |
| ((struct symloc *) pst->read_symtab_private)->lineno_off = | |
| first_fun_line_offset; | |
| first_fun_line_offset = 0; | |
| pst->n_global_syms = | |
| objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset); | |
| pst->n_static_syms = | |
| objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset); | |
| pst->number_of_dependencies = number_dependencies; | |
| if (number_dependencies) | |
| { | |
| pst->dependencies = (struct partial_symtab **) | |
| obstack_alloc (&objfile->objfile_obstack, | |
| number_dependencies * sizeof (struct partial_symtab *)); | |
| memcpy (pst->dependencies, dependency_list, | |
| number_dependencies * sizeof (struct partial_symtab *)); | |
| } | |
| else | |
| pst->dependencies = 0; | |
| for (i = 0; i < num_includes; i++) | |
| { | |
| struct partial_symtab *subpst = | |
| allocate_psymtab (include_list[i], objfile); | |
| subpst->section_offsets = pst->section_offsets; | |
| subpst->read_symtab_private = | |
| (char *) obstack_alloc (&objfile->objfile_obstack, | |
| sizeof (struct symloc)); | |
| ((struct symloc *) subpst->read_symtab_private)->first_symnum = 0; | |
| ((struct symloc *) subpst->read_symtab_private)->numsyms = 0; | |
| subpst->textlow = 0; | |
| subpst->texthigh = 0; | |
| /* We could save slight bits of space by only making one of these, | |
| shared by the entire set of include files. FIXME-someday. */ | |
| subpst->dependencies = (struct partial_symtab **) | |
| obstack_alloc (&objfile->objfile_obstack, | |
| sizeof (struct partial_symtab *)); | |
| subpst->dependencies[0] = pst; | |
| subpst->number_of_dependencies = 1; | |
| subpst->globals_offset = | |
| subpst->n_global_syms = | |
| subpst->statics_offset = | |
| subpst->n_static_syms = 0; | |
| subpst->readin = 0; | |
| subpst->symtab = 0; | |
| subpst->read_symtab = pst->read_symtab; | |
| } | |
| sort_pst_symbols (pst); | |
| /* If there is already a psymtab or symtab for a file of this name, | |
| remove it. (If there is a symtab, more drastic things also | |
| happen.) This happens in VxWorks. */ | |
| free_named_symtabs (pst->filename); | |
| if (num_includes == 0 | |
| && number_dependencies == 0 | |
| && pst->n_global_syms == 0 | |
| && pst->n_static_syms == 0) | |
| { | |
| /* Throw away this psymtab, it's empty. We can't deallocate it, since | |
| it is on the obstack, but we can forget to chain it on the list. */ | |
| /* Empty psymtabs happen as a result of header files which don't have | |
| any symbols in them. There can be a lot of them. */ | |
| discard_psymtab (pst); | |
| /* Indicate that psymtab was thrown away. */ | |
| pst = (struct partial_symtab *) NULL; | |
| } | |
| return pst; | |
| } | |
| static void swap_sym (struct internal_syment *, | |
| union internal_auxent *, char **, char **, | |
| unsigned int *, struct objfile *); | |
| /* Swap raw symbol at *RAW and put the name in *NAME, the symbol in | |
| *SYMBOL, the first auxent in *AUX. Advance *RAW and *SYMNUMP over | |
| the symbol and its auxents. */ | |
| static void | |
| swap_sym (struct internal_syment *symbol, union internal_auxent *aux, | |
| char **name, char **raw, unsigned int *symnump, | |
| struct objfile *objfile) | |
| { | |
| bfd_coff_swap_sym_in (objfile->obfd, *raw, symbol); | |
| if (symbol->n_zeroes) | |
| { | |
| /* If it's exactly E_SYMNMLEN characters long it isn't | |
| '\0'-terminated. */ | |
| if (symbol->n_name[E_SYMNMLEN - 1] != '\0') | |
| { | |
| /* FIXME: wastes memory for symbols which we don't end up putting | |
| into the minimal symbols. */ | |
| char *p; | |
| p = obstack_alloc (&objfile->objfile_obstack, E_SYMNMLEN + 1); | |
| strncpy (p, symbol->n_name, E_SYMNMLEN); | |
| p[E_SYMNMLEN] = '\0'; | |
| *name = p; | |
| } | |
| else | |
| /* Point to the unswapped name as that persists as long as the | |
| objfile does. */ | |
| *name = ((struct external_syment *) *raw)->e.e_name; | |
| } | |
| else if (symbol->n_sclass & 0x80) | |
| { | |
| *name = ((struct coff_symfile_info *) objfile->deprecated_sym_private)->debugsec | |
| + symbol->n_offset; | |
| } | |
| else | |
| { | |
| *name = ((struct coff_symfile_info *) objfile->deprecated_sym_private)->strtbl | |
| + symbol->n_offset; | |
| } | |
| ++*symnump; | |
| *raw += coff_data (objfile->obfd)->local_symesz; | |
| if (symbol->n_numaux > 0) | |
| { | |
| bfd_coff_swap_aux_in (objfile->obfd, *raw, symbol->n_type, | |
| symbol->n_sclass, 0, symbol->n_numaux, aux); | |
| *symnump += symbol->n_numaux; | |
| *raw += coff_data (objfile->obfd)->local_symesz * symbol->n_numaux; | |
| } | |
| } | |
| static void | |
| function_outside_compilation_unit_complaint (const char *arg1) | |
| { | |
| complaint (&symfile_complaints, | |
| _("function `%s' appears to be defined outside of all compilation units"), | |
| arg1); | |
| } | |
| static void | |
| scan_xcoff_symtab (struct objfile *objfile) | |
| { | |
| struct gdbarch *gdbarch = get_objfile_arch (objfile); | |
| CORE_ADDR toc_offset = 0; /* toc offset value in data section. */ | |
| char *filestring = NULL; | |
| char *namestring; | |
| int past_first_source_file = 0; | |
| bfd *abfd; | |
| asection *bfd_sect; | |
| unsigned int nsyms; | |
| /* Current partial symtab */ | |
| struct partial_symtab *pst; | |
| /* List of current psymtab's include files */ | |
| char **psymtab_include_list; | |
| int includes_allocated; | |
| int includes_used; | |
| /* Index within current psymtab dependency list */ | |
| struct partial_symtab **dependency_list; | |
| int dependencies_used, dependencies_allocated; | |
| char *sraw_symbol; | |
| struct internal_syment symbol; | |
| union internal_auxent main_aux[5]; | |
| unsigned int ssymnum; | |
| char *last_csect_name = NULL; /* last seen csect's name and value */ | |
| CORE_ADDR last_csect_val = 0; | |
| int last_csect_sec = 0; | |
| int misc_func_recorded = 0; /* true if any misc. function */ | |
| int textlow_not_set = 1; | |
| pst = (struct partial_symtab *) 0; | |
| includes_allocated = 30; | |
| includes_used = 0; | |
| psymtab_include_list = (char **) alloca (includes_allocated * | |
| sizeof (char *)); | |
| dependencies_allocated = 30; | |
| dependencies_used = 0; | |
| dependency_list = | |
| (struct partial_symtab **) alloca (dependencies_allocated * | |
| sizeof (struct partial_symtab *)); | |
| last_source_file = NULL; | |
| abfd = objfile->obfd; | |
| next_symbol_text_func = xcoff_next_symbol_text; | |
| sraw_symbol = ((struct coff_symfile_info *) objfile->deprecated_sym_private)->symtbl; | |
| nsyms = ((struct coff_symfile_info *) objfile->deprecated_sym_private)->symtbl_num_syms; | |
| ssymnum = 0; | |
| while (ssymnum < nsyms) | |
| { | |
| int sclass; | |
| QUIT; | |
| bfd_coff_swap_sym_in (abfd, sraw_symbol, &symbol); | |
| sclass = symbol.n_sclass; | |
| switch (sclass) | |
| { | |
| case C_EXT: | |
| case C_HIDEXT: | |
| { | |
| /* The CSECT auxent--always the last auxent. */ | |
| union internal_auxent csect_aux; | |
| unsigned int symnum_before = ssymnum; | |
| swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol, | |
| &ssymnum, objfile); | |
| if (symbol.n_numaux > 1) | |
| { | |
| bfd_coff_swap_aux_in | |
| (objfile->obfd, | |
| sraw_symbol - coff_data (abfd)->local_symesz, | |
| symbol.n_type, | |
| symbol.n_sclass, | |
| symbol.n_numaux - 1, | |
| symbol.n_numaux, | |
| &csect_aux); | |
| } | |
| else | |
| csect_aux = main_aux[0]; | |
| /* If symbol name starts with ".$" or "$", ignore it. */ | |
| if (namestring[0] == '$' | |
| || (namestring[0] == '.' && namestring[1] == '$')) | |
| break; | |
| switch (csect_aux.x_csect.x_smtyp & 0x7) | |
| { | |
| case XTY_SD: | |
| switch (csect_aux.x_csect.x_smclas) | |
| { | |
| case XMC_PR: | |
| if (last_csect_name) | |
| { | |
| /* If no misc. function recorded in the last | |
| seen csect, enter it as a function. This | |
| will take care of functions like strcmp() | |
| compiled by xlc. */ | |
| if (!misc_func_recorded) | |
| { | |
| RECORD_MINIMAL_SYMBOL | |
| (last_csect_name, last_csect_val, | |
| mst_text, last_csect_sec, | |
| objfile); | |
| } | |
| if (pst != NULL) | |
| { | |
| /* We have to allocate one psymtab for | |
| each program csect, because their text | |
| sections need not be adjacent. */ | |
| xcoff_end_psymtab | |
| (pst, psymtab_include_list, includes_used, | |
| symnum_before, dependency_list, | |
| dependencies_used, textlow_not_set); | |
| includes_used = 0; | |
| dependencies_used = 0; | |
| /* Give all psymtabs for this source file the same | |
| name. */ | |
| pst = xcoff_start_psymtab | |
| (objfile, | |
| filestring, | |
| symnum_before, | |
| objfile->global_psymbols.next, | |
| objfile->static_psymbols.next); | |
| } | |
| } | |
| /* Activate the misc_func_recorded mechanism for | |
| compiler- and linker-generated CSECTs like ".strcmp" | |
| and "@FIX1". */ | |
| if (namestring && (namestring[0] == '.' | |
| || namestring[0] == '@')) | |
| { | |
| last_csect_name = namestring; | |
| last_csect_val = symbol.n_value; | |
| last_csect_sec = | |
| secnum_to_section (symbol.n_scnum, objfile); | |
| } | |
| if (pst != NULL) | |
| { | |
| CORE_ADDR highval = | |
| symbol.n_value + csect_aux.x_csect.x_scnlen.l; | |
| if (highval > pst->texthigh) | |
| pst->texthigh = highval; | |
| if (pst->textlow == 0 || symbol.n_value < pst->textlow) | |
| pst->textlow = symbol.n_value; | |
| } | |
| misc_func_recorded = 0; | |
| break; | |
| case XMC_RW: | |
| case XMC_TD: | |
| /* Data variables are recorded in the minimal symbol | |
| table, except for section symbols. */ | |
| if (*namestring != '.') | |
| prim_record_minimal_symbol_and_info | |
| (namestring, symbol.n_value, | |
| sclass == C_HIDEXT ? mst_file_data : mst_data, | |
| NULL, secnum_to_section (symbol.n_scnum, objfile), | |
| NULL, objfile); | |
| break; | |
| case XMC_TC0: | |
| if (toc_offset) | |
| warning (_("More than one XMC_TC0 symbol found.")); | |
| toc_offset = symbol.n_value; | |
| /* Make TOC offset relative to start address of section. */ | |
| bfd_sect = secnum_to_bfd_section (symbol.n_scnum, objfile); | |
| if (bfd_sect) | |
| toc_offset -= bfd_section_vma (objfile->obfd, bfd_sect); | |
| break; | |
| case XMC_TC: | |
| /* These symbols tell us where the TOC entry for a | |
| variable is, not the variable itself. */ | |
| break; | |
| default: | |
| break; | |
| } | |
| break; | |
| case XTY_LD: | |
| switch (csect_aux.x_csect.x_smclas) | |
| { | |
| case XMC_PR: | |
| /* A function entry point. */ | |
| if (first_fun_line_offset == 0 && symbol.n_numaux > 1) | |
| first_fun_line_offset = | |
| main_aux[0].x_sym.x_fcnary.x_fcn.x_lnnoptr; | |
| RECORD_MINIMAL_SYMBOL | |
| (namestring, symbol.n_value, | |
| sclass == C_HIDEXT ? mst_file_text : mst_text, | |
| secnum_to_section (symbol.n_scnum, objfile), | |
| objfile); | |
| break; | |
| case XMC_GL: | |
| /* shared library function trampoline code entry | |
| point. */ | |
| /* record trampoline code entries as | |
| mst_solib_trampoline symbol. When we lookup mst | |
| symbols, we will choose mst_text over | |
| mst_solib_trampoline. */ | |
| RECORD_MINIMAL_SYMBOL | |
| (namestring, symbol.n_value, | |
| mst_solib_trampoline, | |
| secnum_to_section (symbol.n_scnum, objfile), | |
| objfile); | |
| break; | |
| case XMC_DS: | |
| /* The symbols often have the same names as | |
| debug symbols for functions, and confuse | |
| lookup_symbol. */ | |
| break; | |
| default: | |
| /* xlc puts each variable in a separate csect, | |
| so we get an XTY_SD for each variable. But | |
| gcc puts several variables in a csect, so | |
| that each variable only gets an XTY_LD. We | |
| still need to record them. This will | |
| typically be XMC_RW; I suspect XMC_RO and | |
| XMC_BS might be possible too. */ | |
| if (*namestring != '.') | |
| prim_record_minimal_symbol_and_info | |
| (namestring, symbol.n_value, | |
| sclass == C_HIDEXT ? mst_file_data : mst_data, | |
| NULL, secnum_to_section (symbol.n_scnum, objfile), | |
| NULL, objfile); | |
| break; | |
| } | |
| break; | |
| case XTY_CM: | |
| switch (csect_aux.x_csect.x_smclas) | |
| { | |
| case XMC_RW: | |
| case XMC_BS: | |
| /* Common variables are recorded in the minimal symbol | |
| table, except for section symbols. */ | |
| if (*namestring != '.') | |
| prim_record_minimal_symbol_and_info | |
| (namestring, symbol.n_value, | |
| sclass == C_HIDEXT ? mst_file_bss : mst_bss, | |
| NULL, secnum_to_section (symbol.n_scnum, objfile), | |
| NULL, objfile); | |
| break; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| break; | |
| case C_FILE: | |
| { | |
| unsigned int symnum_before; | |
| symnum_before = ssymnum; | |
| swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol, | |
| &ssymnum, objfile); | |
| /* See if the last csect needs to be recorded. */ | |
| if (last_csect_name && !misc_func_recorded) | |
| { | |
| /* If no misc. function recorded in the last seen csect, enter | |
| it as a function. This will take care of functions like | |
| strcmp() compiled by xlc. */ | |
| RECORD_MINIMAL_SYMBOL | |
| (last_csect_name, last_csect_val, | |
| mst_text, last_csect_sec, objfile); | |
| } | |
| if (pst) | |
| { | |
| xcoff_end_psymtab (pst, psymtab_include_list, includes_used, | |
| symnum_before, dependency_list, | |
| dependencies_used, textlow_not_set); | |
| includes_used = 0; | |
| dependencies_used = 0; | |
| } | |
| first_fun_line_offset = 0; | |
| /* XCOFF, according to the AIX 3.2 documentation, puts the | |
| filename in cs->c_name. But xlc 1.3.0.2 has decided to | |
| do things the standard COFF way and put it in the auxent. | |
| We use the auxent if the symbol is ".file" and an auxent | |
| exists, otherwise use the symbol itself. */ | |
| if (!strcmp (namestring, ".file") && symbol.n_numaux > 0) | |
| { | |
| filestring = coff_getfilename (&main_aux[0], objfile); | |
| } | |
| else | |
| filestring = namestring; | |
| pst = xcoff_start_psymtab (objfile, | |
| filestring, | |
| symnum_before, | |
| objfile->global_psymbols.next, | |
| objfile->static_psymbols.next); | |
| last_csect_name = NULL; | |
| } | |
| break; | |
| default: | |
| { | |
| complaint (&symfile_complaints, | |
| _("Storage class %d not recognized during scan"), sclass); | |
| } | |
| /* FALLTHROUGH */ | |
| /* C_FCN is .bf and .ef symbols. I think it is sufficient | |
| to handle only the C_FUN and C_EXT. */ | |
| case C_FCN: | |
| case C_BSTAT: | |
| case C_ESTAT: | |
| case C_ARG: | |
| case C_REGPARM: | |
| case C_REG: | |
| case C_TPDEF: | |
| case C_STRTAG: | |
| case C_UNTAG: | |
| case C_ENTAG: | |
| case C_LABEL: | |
| case C_NULL: | |
| /* C_EINCL means we are switching back to the main file. But there | |
| is no reason to care; the only thing we want to know about | |
| includes is the names of all the included (.h) files. */ | |
| case C_EINCL: | |
| case C_BLOCK: | |
| /* I don't think C_STAT is used in xcoff; C_HIDEXT appears to be | |
| used instead. */ | |
| case C_STAT: | |
| /* I don't think the name of the common block (as opposed to the | |
| variables within it) is something which is user visible | |
| currently. */ | |
| case C_BCOMM: | |
| case C_ECOMM: | |
| case C_PSYM: | |
| case C_RPSYM: | |
| /* I think we can ignore C_LSYM; types on xcoff seem to use C_DECL | |
| so C_LSYM would appear to be only for locals. */ | |
| case C_LSYM: | |
| case C_AUTO: | |
| case C_RSYM: | |
| { | |
| /* We probably could save a few instructions by assuming that | |
| C_LSYM, C_PSYM, etc., never have auxents. */ | |
| int naux1 = symbol.n_numaux + 1; | |
| ssymnum += naux1; | |
| sraw_symbol += bfd_coff_symesz (abfd) * naux1; | |
| } | |
| break; | |
| case C_BINCL: | |
| { | |
| /* Mark down an include file in the current psymtab */ | |
| enum language tmp_language; | |
| swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol, | |
| &ssymnum, objfile); | |
| tmp_language = deduce_language_from_filename (namestring); | |
| /* Only change the psymtab's language if we've learned | |
| something useful (eg. tmp_language is not language_unknown). | |
| In addition, to match what start_subfile does, never change | |
| from C++ to C. */ | |
| if (tmp_language != language_unknown | |
| && (tmp_language != language_c | |
| || psymtab_language != language_cplus)) | |
| psymtab_language = tmp_language; | |
| /* In C++, one may expect the same filename to come round many | |
| times, when code is coming alternately from the main file | |
| and from inline functions in other files. So I check to see | |
| if this is a file we've seen before -- either the main | |
| source file, or a previously included file. | |
| This seems to be a lot of time to be spending on N_SOL, but | |
| things like "break c-exp.y:435" need to work (I | |
| suppose the psymtab_include_list could be hashed or put | |
| in a binary tree, if profiling shows this is a major hog). */ | |
| if (pst && strcmp (namestring, pst->filename) == 0) | |
| continue; | |
| { | |
| int i; | |
| for (i = 0; i < includes_used; i++) | |
| if (strcmp (namestring, psymtab_include_list[i]) == 0) | |
| { | |
| i = -1; | |
| break; | |
| } | |
| if (i == -1) | |
| continue; | |
| } | |
| psymtab_include_list[includes_used++] = namestring; | |
| if (includes_used >= includes_allocated) | |
| { | |
| char **orig = psymtab_include_list; | |
| psymtab_include_list = (char **) | |
| alloca ((includes_allocated *= 2) * | |
| sizeof (char *)); | |
| memcpy (psymtab_include_list, orig, | |
| includes_used * sizeof (char *)); | |
| } | |
| continue; | |
| } | |
| case C_FUN: | |
| /* The value of the C_FUN is not the address of the function (it | |
| appears to be the address before linking), but as long as it | |
| is smaller than the actual address, then find_pc_partial_function | |
| will use the minimal symbols instead. I hope. */ | |
| case C_GSYM: | |
| case C_ECOML: | |
| case C_DECL: | |
| case C_STSYM: | |
| { | |
| char *p; | |
| swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol, | |
| &ssymnum, objfile); | |
| p = (char *) strchr (namestring, ':'); | |
| if (!p) | |
| continue; /* Not a debugging symbol. */ | |
| /* Main processing section for debugging symbols which | |
| the initial read through the symbol tables needs to worry | |
| about. If we reach this point, the symbol which we are | |
| considering is definitely one we are interested in. | |
| p must also contain the (valid) index into the namestring | |
| which indicates the debugging type symbol. */ | |
| switch (p[1]) | |
| { | |
| case 'S': | |
| symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile)); | |
| if (gdbarch_static_transform_name_p (gdbarch)) | |
| namestring = gdbarch_static_transform_name | |
| (gdbarch, namestring); | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_STATIC, | |
| &objfile->static_psymbols, | |
| 0, symbol.n_value, | |
| psymtab_language, objfile); | |
| continue; | |
| case 'G': | |
| symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile)); | |
| /* The addresses in these entries are reported to be | |
| wrong. See the code that reads 'G's for symtabs. */ | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_STATIC, | |
| &objfile->global_psymbols, | |
| 0, symbol.n_value, | |
| psymtab_language, objfile); | |
| continue; | |
| case 'T': | |
| /* When a 'T' entry is defining an anonymous enum, it | |
| may have a name which is the empty string, or a | |
| single space. Since they're not really defining a | |
| symbol, those shouldn't go in the partial symbol | |
| table. We do pick up the elements of such enums at | |
| 'check_enum:', below. */ | |
| if (p >= namestring + 2 | |
| || (p == namestring + 1 | |
| && namestring[0] != ' ')) | |
| { | |
| add_psymbol_to_list (namestring, p - namestring, | |
| STRUCT_DOMAIN, LOC_TYPEDEF, | |
| &objfile->static_psymbols, | |
| symbol.n_value, 0, | |
| psymtab_language, objfile); | |
| if (p[2] == 't') | |
| { | |
| /* Also a typedef with the same name. */ | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_TYPEDEF, | |
| &objfile->static_psymbols, | |
| symbol.n_value, 0, | |
| psymtab_language, objfile); | |
| p += 1; | |
| } | |
| } | |
| goto check_enum; | |
| case 't': | |
| if (p != namestring) /* a name is there, not just :T... */ | |
| { | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_TYPEDEF, | |
| &objfile->static_psymbols, | |
| symbol.n_value, 0, | |
| psymtab_language, objfile); | |
| } | |
| check_enum: | |
| /* If this is an enumerated type, we need to | |
| add all the enum constants to the partial symbol | |
| table. This does not cover enums without names, e.g. | |
| "enum {a, b} c;" in C, but fortunately those are | |
| rare. There is no way for GDB to find those from the | |
| enum type without spending too much time on it. Thus | |
| to solve this problem, the compiler needs to put out the | |
| enum in a nameless type. GCC2 does this. */ | |
| /* We are looking for something of the form | |
| <name> ":" ("t" | "T") [<number> "="] "e" | |
| {<constant> ":" <value> ","} ";". */ | |
| /* Skip over the colon and the 't' or 'T'. */ | |
| p += 2; | |
| /* This type may be given a number. Also, numbers can come | |
| in pairs like (0,26). Skip over it. */ | |
| while ((*p >= '0' && *p <= '9') | |
| || *p == '(' || *p == ',' || *p == ')' | |
| || *p == '=') | |
| p++; | |
| if (*p++ == 'e') | |
| { | |
| /* The aix4 compiler emits extra crud before the members. */ | |
| if (*p == '-') | |
| { | |
| /* Skip over the type (?). */ | |
| while (*p != ':') | |
| p++; | |
| /* Skip over the colon. */ | |
| p++; | |
| } | |
| /* We have found an enumerated type. */ | |
| /* According to comments in read_enum_type | |
| a comma could end it instead of a semicolon. | |
| I don't know where that happens. | |
| Accept either. */ | |
| while (*p && *p != ';' && *p != ',') | |
| { | |
| char *q; | |
| /* Check for and handle cretinous dbx symbol name | |
| continuation! */ | |
| if (*p == '\\' || (*p == '?' && p[1] == '\0')) | |
| p = next_symbol_text (objfile); | |
| /* Point to the character after the name | |
| of the enum constant. */ | |
| for (q = p; *q && *q != ':'; q++) | |
| ; | |
| /* Note that the value doesn't matter for | |
| enum constants in psymtabs, just in symtabs. */ | |
| add_psymbol_to_list (p, q - p, | |
| VAR_DOMAIN, LOC_CONST, | |
| &objfile->static_psymbols, 0, | |
| 0, psymtab_language, objfile); | |
| /* Point past the name. */ | |
| p = q; | |
| /* Skip over the value. */ | |
| while (*p && *p != ',') | |
| p++; | |
| /* Advance past the comma. */ | |
| if (*p) | |
| p++; | |
| } | |
| } | |
| continue; | |
| case 'c': | |
| /* Constant, e.g. from "const" in Pascal. */ | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_CONST, | |
| &objfile->static_psymbols, symbol.n_value, | |
| 0, psymtab_language, objfile); | |
| continue; | |
| case 'f': | |
| if (! pst) | |
| { | |
| int name_len = p - namestring; | |
| char *name = xmalloc (name_len + 1); | |
| memcpy (name, namestring, name_len); | |
| name[name_len] = '\0'; | |
| function_outside_compilation_unit_complaint (name); | |
| xfree (name); | |
| } | |
| symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile)); | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_BLOCK, | |
| &objfile->static_psymbols, | |
| 0, symbol.n_value, | |
| psymtab_language, objfile); | |
| continue; | |
| /* Global functions were ignored here, but now they | |
| are put into the global psymtab like one would expect. | |
| They're also in the minimal symbol table. */ | |
| case 'F': | |
| if (! pst) | |
| { | |
| int name_len = p - namestring; | |
| char *name = xmalloc (name_len + 1); | |
| memcpy (name, namestring, name_len); | |
| name[name_len] = '\0'; | |
| function_outside_compilation_unit_complaint (name); | |
| xfree (name); | |
| } | |
| symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile)); | |
| add_psymbol_to_list (namestring, p - namestring, | |
| VAR_DOMAIN, LOC_BLOCK, | |
| &objfile->global_psymbols, | |
| 0, symbol.n_value, | |
| psymtab_language, objfile); | |
| continue; | |
| /* Two things show up here (hopefully); static symbols of | |
| local scope (static used inside braces) or extensions | |
| of structure symbols. We can ignore both. */ | |
| case 'V': | |
| case '(': | |
| case '0': | |
| case '1': | |
| case '2': | |
| case '3': | |
| case '4': | |
| case '5': | |
| case '6': | |
| case '7': | |
| case '8': | |
| case '9': | |
| case '-': | |
| case '#': /* for symbol identification (used in live ranges) */ | |
| continue; | |
| case ':': | |
| /* It is a C++ nested symbol. We don't need to record it | |
| (I don't think); if we try to look up foo::bar::baz, | |
| then symbols for the symtab containing foo should get | |
| read in, I think. */ | |
| /* Someone says sun cc puts out symbols like | |
| /foo/baz/maclib::/usr/local/bin/maclib, | |
| which would get here with a symbol type of ':'. */ | |
| continue; | |
| default: | |
| /* Unexpected symbol descriptor. The second and subsequent stabs | |
| of a continued stab can show up here. The question is | |
| whether they ever can mimic a normal stab--it would be | |
| nice if not, since we certainly don't want to spend the | |
| time searching to the end of every string looking for | |
| a backslash. */ | |
| complaint (&symfile_complaints, | |
| _("unknown symbol descriptor `%c'"), p[1]); | |
| /* Ignore it; perhaps it is an extension that we don't | |
| know about. */ | |
| continue; | |
| } | |
| } | |
| } | |
| } | |
| if (pst) | |
| { | |
| xcoff_end_psymtab (pst, psymtab_include_list, includes_used, | |
| ssymnum, dependency_list, | |
| dependencies_used, textlow_not_set); | |
| } | |
| /* Record the toc offset value of this symbol table into objfile structure. | |
| If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain | |
| this information would be file auxiliary header. */ | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->toc_offset = toc_offset; | |
| } | |
| /* Return the toc offset value for a given objfile. */ | |
| CORE_ADDR | |
| get_toc_offset (struct objfile *objfile) | |
| { | |
| if (objfile) | |
| return ((struct coff_symfile_info *) objfile->deprecated_sym_private)->toc_offset; | |
| return 0; | |
| } | |
| /* Scan and build partial symbols for a symbol file. | |
| We have been initialized by a call to dbx_symfile_init, which | |
| put all the relevant info into a "struct dbx_symfile_info", | |
| hung off the objfile structure. | |
| SECTION_OFFSETS contains offsets relative to which the symbols in the | |
| various sections are (depending where the sections were actually loaded). | |
| MAINLINE is true if we are reading the main symbol | |
| table (as opposed to a shared lib or dynamically loaded file). */ | |
| static void | |
| xcoff_initial_scan (struct objfile *objfile, int mainline) | |
| { | |
| bfd *abfd; | |
| int val; | |
| struct cleanup *back_to; | |
| int num_symbols; /* # of symbols */ | |
| file_ptr symtab_offset; /* symbol table and */ | |
| file_ptr stringtab_offset; /* string table file offsets */ | |
| struct coff_symfile_info *info; | |
| char *name; | |
| unsigned int size; | |
| info = (struct coff_symfile_info *) objfile->deprecated_sym_private; | |
| symfile_bfd = abfd = objfile->obfd; | |
| name = objfile->name; | |
| num_symbols = bfd_get_symcount (abfd); /* # of symbols */ | |
| symtab_offset = obj_sym_filepos (abfd); /* symbol table file offset */ | |
| stringtab_offset = symtab_offset + | |
| num_symbols * coff_data (abfd)->local_symesz; | |
| info->min_lineno_offset = 0; | |
| info->max_lineno_offset = 0; | |
| bfd_map_over_sections (abfd, find_linenos, info); | |
| if (num_symbols > 0) | |
| { | |
| /* Read the string table. */ | |
| init_stringtab (abfd, stringtab_offset, objfile); | |
| /* Read the .debug section, if present. */ | |
| { | |
| struct bfd_section *secp; | |
| bfd_size_type length; | |
| char *debugsec = NULL; | |
| secp = bfd_get_section_by_name (abfd, ".debug"); | |
| if (secp) | |
| { | |
| length = bfd_section_size (abfd, secp); | |
| if (length) | |
| { | |
| debugsec = | |
| (char *) obstack_alloc (&objfile->objfile_obstack, length); | |
| if (!bfd_get_section_contents (abfd, secp, debugsec, | |
| (file_ptr) 0, length)) | |
| { | |
| error (_("Error reading .debug section of `%s': %s"), | |
| name, bfd_errmsg (bfd_get_error ())); | |
| } | |
| } | |
| } | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->debugsec = | |
| debugsec; | |
| } | |
| } | |
| /* Read the symbols. We keep them in core because we will want to | |
| access them randomly in read_symbol*. */ | |
| val = bfd_seek (abfd, symtab_offset, SEEK_SET); | |
| if (val < 0) | |
| error (_("Error reading symbols from %s: %s"), | |
| name, bfd_errmsg (bfd_get_error ())); | |
| size = coff_data (abfd)->local_symesz * num_symbols; | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->symtbl = | |
| obstack_alloc (&objfile->objfile_obstack, size); | |
| ((struct coff_symfile_info *) objfile->deprecated_sym_private)->symtbl_num_syms = | |
| num_symbols; | |
| val = bfd_bread (((struct coff_symfile_info *) objfile->deprecated_sym_private)->symtbl, | |
| size, abfd); | |
| if (val != size) | |
| perror_with_name (_("reading symbol table")); | |
| /* If we are reinitializing, or if we have never loaded syms yet, init */ | |
| if (mainline | |
| || (objfile->global_psymbols.size == 0 | |
| && objfile->static_psymbols.size == 0)) | |
| /* I'm not sure how how good num_symbols is; the rule of thumb in | |
| init_psymbol_list was developed for a.out. On the one hand, | |
| num_symbols includes auxents. On the other hand, it doesn't | |
| include N_SLINE. */ | |
| init_psymbol_list (objfile, num_symbols); | |
| free_pending_blocks (); | |
| back_to = make_cleanup (really_free_pendings, 0); | |
| init_minimal_symbol_collection (); | |
| make_cleanup_discard_minimal_symbols (); | |
| /* Now that the symbol table data of the executable file are all in core, | |
| process them and define symbols accordingly. */ | |
| scan_xcoff_symtab (objfile); | |
| /* Install any minimal symbols that have been collected as the current | |
| minimal symbols for this objfile. */ | |
| install_minimal_symbols (objfile); | |
| do_cleanups (back_to); | |
| } | |
| static void | |
| xcoff_symfile_offsets (struct objfile *objfile, struct section_addr_info *addrs) | |
| { | |
| asection *sect = NULL; | |
| int i; | |
| objfile->num_sections = bfd_count_sections (objfile->obfd); | |
| objfile->section_offsets = (struct section_offsets *) | |
| obstack_alloc (&objfile->objfile_obstack, | |
| SIZEOF_N_SECTION_OFFSETS (objfile->num_sections)); | |
| /* Initialize the section indexes for future use. */ | |
| sect = bfd_get_section_by_name (objfile->obfd, ".text"); | |
| if (sect) | |
| objfile->sect_index_text = sect->index; | |
| sect = bfd_get_section_by_name (objfile->obfd, ".data"); | |
| if (sect) | |
| objfile->sect_index_data = sect->index; | |
| sect = bfd_get_section_by_name (objfile->obfd, ".bss"); | |
| if (sect) | |
| objfile->sect_index_bss = sect->index; | |
| sect = bfd_get_section_by_name (objfile->obfd, ".rodata"); | |
| if (sect) | |
| objfile->sect_index_rodata = sect->index; | |
| for (i = 0; i < objfile->num_sections; ++i) | |
| { | |
| /* syms_from_objfile kindly subtracts from addr the | |
| bfd_section_vma of the .text section. This strikes me as | |
| wrong--whether the offset to be applied to symbol reading is | |
| relative to the start address of the section depends on the | |
| symbol format. In any event, this whole "addr" concept is | |
| pretty broken (it doesn't handle any section but .text | |
| sensibly), so just ignore the addr parameter and use 0. | |
| rs6000-nat.c will set the correct section offsets via | |
| objfile_relocate. */ | |
| (objfile->section_offsets)->offsets[i] = 0; | |
| } | |
| } | |
| /* Register our ability to parse symbols for xcoff BFD files. */ | |
| static struct sym_fns xcoff_sym_fns = | |
| { | |
| /* It is possible that coff and xcoff should be merged as | |
| they do have fundamental similarities (for example, the extra storage | |
| classes used for stabs could presumably be recognized in any COFF file). | |
| However, in addition to obvious things like all the csect hair, there are | |
| some subtler differences between xcoffread.c and coffread.c, notably | |
| the fact that coffread.c has no need to read in all the symbols, but | |
| xcoffread.c reads all the symbols and does in fact randomly access them | |
| (in C_BSTAT and line number processing). */ | |
| bfd_target_xcoff_flavour, | |
| xcoff_new_init, /* sym_new_init: init anything gbl to entire symtab */ | |
| xcoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */ | |
| xcoff_initial_scan, /* sym_read: read a symbol file into symtab */ | |
| xcoff_symfile_finish, /* sym_finish: finished with file, cleanup */ | |
| xcoff_symfile_offsets, /* sym_offsets: xlate offsets ext->int form */ | |
| default_symfile_segments, /* sym_segments: Get segment information from | |
| a file. */ | |
| aix_process_linenos, /* sym_read_linetable */ | |
| NULL /* next: pointer to next struct sym_fns */ | |
| }; | |
| void | |
| _initialize_xcoffread (void) | |
| { | |
| add_symtab_fns (&xcoff_sym_fns); | |
| } |