| dnl Process this file with autoconf to produce a configure script | |
| AC_PREREQ(2.59) | |
| AC_INIT | |
| AC_CONFIG_SRCDIR([xmalloc.c]) | |
| # This works around the fact that libtool configuration may change LD | |
| # for this particular configuration, but some shells, instead of | |
| # keeping the changes in LD private, export them just because LD is | |
| # exported. We don't use libtool yet, but some day we might, so... | |
| ORIGINAL_LD_FOR_MULTILIBS=$LD | |
| dnl We use these options to decide which functions to include. | |
| AC_ARG_WITH(target-subdir, | |
| [ --with-target-subdir=SUBDIR Configuring in a subdirectory for target]) | |
| AC_ARG_WITH(build-subdir, | |
| [ --with-build-subdir=SUBDIR Configuring in a subdirectory for build]) | |
| AC_ARG_WITH(cross-host, | |
| [ --with-cross-host=HOST Configuring with a cross compiler]) | |
| AC_ARG_WITH(newlib, | |
| [ --with-newlib Configuring with newlib]) | |
| if test "${srcdir}" = "."; then | |
| if test -n "${with_build_subdir}"; then | |
| libiberty_topdir="${srcdir}/../.." | |
| with_target_subdir= | |
| elif test -z "${with_target_subdir}"; then | |
| libiberty_topdir="${srcdir}/.." | |
| else | |
| if test "${with_target_subdir}" != "."; then | |
| libiberty_topdir="${srcdir}/${with_multisrctop}../.." | |
| else | |
| libiberty_topdir="${srcdir}/${with_multisrctop}.." | |
| fi | |
| fi | |
| else | |
| libiberty_topdir="${srcdir}/.." | |
| fi | |
| AC_SUBST(libiberty_topdir) | |
| AC_CONFIG_AUX_DIR($libiberty_topdir) | |
| dnl Very limited version of automake's enable-maintainer-mode | |
| AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) | |
| dnl maintainer-mode is disabled by default | |
| AC_ARG_ENABLE(maintainer-mode, | |
| [ --enable-maintainer-mode | |
| enable make rules and dependencies not useful | |
| (and sometimes confusing) to the casual installer], | |
| maintainer_mode=$enableval, | |
| maintainer_mode=no) | |
| AC_MSG_RESULT($maintainer_mode) | |
| if test "$maintainer_mode" = "yes"; then | |
| MAINT='' | |
| NOTMAINT='#' | |
| else | |
| MAINT='#' | |
| NOTMAINT='' | |
| fi | |
| AC_SUBST(MAINT)dnl | |
| AC_SUBST(NOTMAINT)dnl | |
| # Do we have a single-tree copy of texinfo? Even if we do, we can't | |
| # rely on it - libiberty is built before texinfo. | |
| AC_CHECK_PROG(MAKEINFO, makeinfo, makeinfo, ) | |
| if test "x$MAKEINFO" = "x"; then | |
| MAKEINFO="@echo makeinfo missing; true" | |
| BUILD_INFO= | |
| else | |
| BUILD_INFO=info | |
| case "$MAKEINFO" in | |
| */missing\ makeinfo*) | |
| BUILD_INFO= | |
| AC_MSG_WARN([ | |
| *** Makeinfo is missing. Info documentation will not be built.]) | |
| ;; | |
| *) | |
| case x"`$MAKEINFO --version | grep 'GNU texinfo'`" in | |
| x*\ [[1-3]].* ) | |
| MAKEINFO="@echo $MAKEINFO is too old, 4.0 or newer required; true" | |
| BUILD_INFO= | |
| AC_MSG_WARN([ | |
| *** Makeinfo is too old. Info documentation will not be built.]) | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| fi | |
| AC_SUBST(MAKEINFO) | |
| AC_SUBST(BUILD_INFO) | |
| AC_CHECK_PROG(PERL, perl, perl, ) | |
| if test x"$PERL" = x""; then | |
| HAVE_PERL='#' | |
| else | |
| HAVE_PERL='' | |
| fi | |
| AC_SUBST(HAVE_PERL) | |
| AC_CANONICAL_HOST | |
| dnl When we start using automake: | |
| dnl AM_INIT_AUTOMAKE(libiberty, 1.0) | |
| dnl These must be called before AM_PROG_LIBTOOL, because it may want | |
| dnl to call AC_CHECK_PROG. | |
| AC_CHECK_TOOL(AR, ar) | |
| AC_CHECK_TOOL(RANLIB, ranlib, :) | |
| dnl When switching to automake, replace the following with AM_ENABLE_MULTILIB. | |
| # Add --enable-multilib to configure. | |
| # Default to --enable-multilib | |
| AC_ARG_ENABLE(multilib, | |
| [ --enable-multilib build many library versions (default)], | |
| [case "$enableval" in | |
| yes) multilib=yes ;; | |
| no) multilib=no ;; | |
| *) AC_MSG_ERROR([bad value $enableval for multilib option]) ;; | |
| esac], | |
| [multilib=yes]) | |
| # Even if the default multilib is not a cross compilation, | |
| # it may be that some of the other multilibs are. | |
| if test $cross_compiling = no && test $multilib = yes \ | |
| && test "x${with_multisubdir}" != x ; then | |
| cross_compiling=maybe | |
| fi | |
| GCC_NO_EXECUTABLES | |
| AC_PROG_CC | |
| AC_PROG_CPP_WERROR | |
| ACX_PROG_CC_WARNING_OPTS([-W -Wall -Wwrite-strings -Wc++-compat \ | |
| -Wstrict-prototypes], [ac_libiberty_warn_cflags]) | |
| ACX_PROG_CC_WARNING_ALMOST_PEDANTIC([], [ac_libiberty_warn_cflags]) | |
| AC_PROG_CC_C_O | |
| # autoconf is lame and doesn't give us any substitution variable for this. | |
| if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then | |
| NO_MINUS_C_MINUS_O=yes | |
| else | |
| OUTPUT_OPTION='-o $@' | |
| fi | |
| AC_SUBST(NO_MINUS_C_MINUS_O) | |
| AC_SUBST(OUTPUT_OPTION) | |
| AC_C_CONST | |
| AC_C_INLINE | |
| AC_C_BIGENDIAN | |
| dnl When we start using libtool: | |
| dnl Default to a non shared library. This may be overridden by the | |
| dnl configure option --enable-shared. | |
| dnl AM_DISABLE_SHARED | |
| dnl When we start using libtool: | |
| dnl AM_PROG_LIBTOOL | |
| dnl When we start using automake: | |
| dnl AM_CONFIG_HEADER(config.h:config.in) | |
| AC_CONFIG_HEADER(config.h:config.in) | |
| dnl When we start using automake: | |
| dnl AM_MAINTAINER_MODE | |
| dnl AC_EXEEXT | |
| dnl When we start using automake: | |
| dnl AM_PROG_INSTALL | |
| AC_PROG_INSTALL | |
| # Don't build the shared library for build. | |
| if [[ -n "${with_build_subdir}" ]]; then | |
| enable_shared=no | |
| fi | |
| frag= | |
| case "${host}" in | |
| rs6000-ibm-aix3.1 | rs6000-ibm-aix) | |
| frag=mh-aix ;; | |
| *-*-cxux7*) frag=mh-cxux7 ;; | |
| *-*-freebsd2.1.*) frag=mh-fbsd21 ;; | |
| *-*-freebsd2.2.[[012]]) frag=mh-fbsd21 ;; | |
| i370-*-opened*) frag=mh-openedition ;; | |
| i[[34567]]86-*-windows*) frag=mh-windows ;; | |
| esac | |
| if [[ -n "${frag}" ]]; then | |
| frag=${libiberty_topdir}/libiberty/config/$frag | |
| fi | |
| # If they didn't specify --enable-shared, don't generate shared libs. | |
| case "${enable_shared}" in | |
| yes) shared=yes ;; | |
| no) shared=no ;; | |
| "") shared=no ;; | |
| *) shared=yes ;; | |
| esac | |
| if [[ "${shared}" = "yes" ]]; then | |
| case "${host}" in | |
| *-*-cygwin*) ;; | |
| alpha*-*-linux*) PICFLAG=-fPIC ;; | |
| arm*-*-*) PICFLAG=-fPIC ;; | |
| hppa*-*-*) PICFLAG=-fPIC ;; | |
| i370-*-*) PICFLAG=-fPIC ;; | |
| ia64-*-*) PICFLAG=-fpic ;; | |
| i[[34567]]86-*-* | x86_64-*-*) | |
| PICFLAG=-fpic ;; | |
| m68k-*-*) PICFLAG=-fpic ;; | |
| mips*-*-linux) PICFLAG=-fPIC ;; | |
| powerpc*-*-aix*) ;; | |
| powerpc*-*-*) PICFLAG=-fPIC ;; | |
| sparc*-*-*) case "${CFLAGS}" in | |
| *-fpic* ) PICFLAG=-fpic ;; | |
| * ) PICFLAG=-fPIC ;; | |
| esac ;; | |
| s390*-*-*) PICFLAG=-fpic ;; | |
| esac | |
| fi | |
| AC_SUBST(PICFLAG) | |
| echo "# Warning: this fragment is automatically generated" > temp-frag | |
| if [[ -n "${frag}" ]] && [[ -f "${frag}" ]]; then | |
| echo "Appending ${frag} to xhost-mkfrag" | |
| echo "# Following fragment copied from ${frag}" >> temp-frag | |
| cat ${frag} >> temp-frag | |
| fi | |
| # record if we want to build shared libs. | |
| if [[ "${shared}" = "yes" ]]; then | |
| echo enable_shared = yes >> temp-frag | |
| else | |
| echo enable_shared = no >> temp-frag | |
| fi | |
| frag=xhost-mkfrag | |
| ${CONFIG_SHELL-/bin/sh} ${libiberty_topdir}/move-if-change temp-frag xhost-mkfrag | |
| host_makefile_frag=${frag} | |
| AC_SUBST_FILE(host_makefile_frag) | |
| # It's OK to check for header files. Although the compiler may not be | |
| # able to link anything, it had better be able to at least compile | |
| # something. | |
| AC_CHECK_HEADERS(sys/file.h sys/param.h limits.h stdlib.h malloc.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h alloca.h sys/pstat.h sys/sysmp.h sys/sysinfo.h machine/hal_sysinfo.h sys/table.h sys/sysctl.h sys/systemcfg.h stdint.h stdio_ext.h) | |
| AC_HEADER_SYS_WAIT | |
| AC_HEADER_TIME | |
| libiberty_AC_DECLARE_ERRNO | |
| # Determine the size of an int for struct fibnode. | |
| AC_CHECK_SIZEOF([int]) | |
| AC_CHECK_TYPE(uintptr_t, unsigned long) | |
| # Look for a 64-bit type. | |
| AC_MSG_CHECKING([for a 64-bit type]) | |
| AC_CACHE_VAL(liberty_cv_uint64, | |
| [AC_TRY_COMPILE( | |
| [#ifdef HAVE_STDINT_H | |
| #include <stdint.h> | |
| #endif], | |
| [extern uint64_t foo;], | |
| liberty_cv_uint64=uint64_t, | |
| [AC_TRY_COMPILE( | |
| [#ifdef HAVE_LIMITS_H | |
| #include <limits.h> | |
| #endif | |
| #ifndef CHAR_BIT | |
| #define CHAR_BIT 8 | |
| #endif], | |
| [extern char foo[sizeof(long) * CHAR_BIT >= 64 ? 1 : -1];], | |
| liberty_cv_uint64="unsigned long", | |
| [AC_TRY_COMPILE( | |
| [#ifdef HAVE_LIMITS_H | |
| #include <limits.h> | |
| #endif | |
| #ifndef CHAR_BIT | |
| #define CHAR_BIT 8 | |
| #endif], | |
| [extern char foo[sizeof(long long) * CHAR_BIT >= 64 ? 1 : -1];], | |
| liberty_cv_uint64="unsigned long long", liberty_cv_uint64=none)])])]) | |
| AC_MSG_RESULT($liberty_cv_uint64) | |
| if test "$liberty_cv_uint64" != none; then | |
| AC_DEFINE_UNQUOTED(UNSIGNED_64BIT_TYPE, $liberty_cv_uint64, | |
| [Define to an unsigned 64-bit type available in the compiler.]) | |
| fi | |
| # Given the above check, we always have uintptr_t or a fallback | |
| # definition. So define HAVE_UINTPTR_T in case any imported code | |
| # relies on it. | |
| AC_DEFINE(HAVE_UINTPTR_T, 1, [Define if you have the \`uintptr_t' type.]) | |
| AC_TYPE_PID_T | |
| # This is the list of functions which libiberty will provide if they | |
| # are not available on the host. | |
| funcs="asprintf" | |
| funcs="$funcs atexit" | |
| funcs="$funcs basename" | |
| funcs="$funcs bcmp" | |
| funcs="$funcs bcopy" | |
| funcs="$funcs bsearch" | |
| funcs="$funcs bzero" | |
| funcs="$funcs calloc" | |
| funcs="$funcs clock" | |
| funcs="$funcs ffs" | |
| funcs="$funcs getcwd" | |
| funcs="$funcs getpagesize" | |
| funcs="$funcs gettimeofday" | |
| funcs="$funcs index" | |
| funcs="$funcs insque" | |
| funcs="$funcs memchr" | |
| funcs="$funcs memcmp" | |
| funcs="$funcs memcpy" | |
| funcs="$funcs memmove" | |
| funcs="$funcs mempcpy" | |
| funcs="$funcs memset" | |
| funcs="$funcs mkstemps" | |
| funcs="$funcs putenv" | |
| funcs="$funcs random" | |
| funcs="$funcs rename" | |
| funcs="$funcs rindex" | |
| funcs="$funcs setenv" | |
| funcs="$funcs snprintf" | |
| funcs="$funcs sigsetmask" | |
| funcs="$funcs stpcpy" | |
| funcs="$funcs stpncpy" | |
| funcs="$funcs strcasecmp" | |
| funcs="$funcs strchr" | |
| funcs="$funcs strdup" | |
| funcs="$funcs strncasecmp" | |
| funcs="$funcs strndup" | |
| funcs="$funcs strrchr" | |
| funcs="$funcs strstr" | |
| funcs="$funcs strtod" | |
| funcs="$funcs strtol" | |
| funcs="$funcs strtoul" | |
| funcs="$funcs strverscmp" | |
| funcs="$funcs tmpnam" | |
| funcs="$funcs vasprintf" | |
| funcs="$funcs vfprintf" | |
| funcs="$funcs vprintf" | |
| funcs="$funcs vsnprintf" | |
| funcs="$funcs vsprintf" | |
| funcs="$funcs waitpid" | |
| # Also in the old function.def file: alloca, vfork, getopt. | |
| vars="sys_errlist sys_nerr sys_siglist" | |
| checkfuncs="getrusage on_exit psignal strerror strsignal sysconf times sbrk gettimeofday" | |
| checkfuncs="$checkfuncs realpath canonicalize_file_name pstat_getstatic pstat_getdynamic sysmp" | |
| checkfuncs="$checkfuncs getsysinfo table sysctl wait3 wait4 __fsetlocking" | |
| # These are neither executed nor required, but they help keep | |
| # autoheader happy without adding a bunch of text to acconfig.h. | |
| if test "x" = "y"; then | |
| AC_CHECK_FUNCS(asprintf atexit basename bcmp bcopy bsearch bzero calloc clock \ | |
| getcwd getpagesize gettimeofday index insque mkstemps memchr memcmp memcpy \ | |
| memmove mempcpy memset putenv random rename rindex sigsetmask \ | |
| strcasecmp setenv stpcpy stpncpy strchr strdup strncasecmp strndup strrchr strstr \ | |
| strtod strtol strtoul strverscmp tmpnam vasprintf vfprintf vprintf \ | |
| vsprintf waitpid getrusage on_exit psignal strerror strsignal \ | |
| sysconf times sbrk gettimeofday ffs snprintf vsnprintf \ | |
| pstat_getstatic pstat_getdynamic sysmp getsysinfo table sysctl wait3 wait4 \ | |
| realpath canonicalize_file_name __fsetlocking) | |
| AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf]) | |
| AC_DEFINE(HAVE_SYS_ERRLIST, 1, [Define if you have the sys_errlist variable.]) | |
| AC_DEFINE(HAVE_SYS_NERR, 1, [Define if you have the sys_nerr variable.]) | |
| AC_DEFINE(HAVE_SYS_SIGLIST, 1, [Define if you have the sys_siglist variable.]) | |
| fi | |
| # For each of these functions, if the host does not provide the | |
| # function we want to put FN.o in LIBOBJS, and if the host does | |
| # provide the function, we want to define HAVE_FN in config.h. | |
| setobjs= | |
| CHECK= | |
| target_header_dir= | |
| if test -n "${with_target_subdir}"; then | |
| # We are being configured as a target library. AC_REPLACE_FUNCS | |
| # may not work correctly, because the compiler may not be able to | |
| # link executables. Note that we may still be being configured | |
| # native. | |
| # If we are being configured for newlib, we know which functions | |
| # newlib provide and which ones we will be expected to provide. | |
| if test "x${with_newlib}" = "xyes"; then | |
| AC_LIBOBJ([asprintf]) | |
| AC_LIBOBJ([basename]) | |
| AC_LIBOBJ([insque]) | |
| AC_LIBOBJ([random]) | |
| AC_LIBOBJ([strdup]) | |
| AC_LIBOBJ([vasprintf]) | |
| for f in $funcs; do | |
| case "$f" in | |
| asprintf | basename | insque | random | strdup | vasprintf) | |
| ;; | |
| *) | |
| n=HAVE_`echo $f | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` | |
| AC_DEFINE_UNQUOTED($n) | |
| ;; | |
| esac | |
| done | |
| # newlib doesnt provide any of the variables in $vars, so we | |
| # dont have to check them here. | |
| # Of the functions in $checkfuncs, newlib only has strerror. | |
| AC_DEFINE(HAVE_STRERROR) | |
| setobjs=yes | |
| fi | |
| # If we are being configured for Mingw, we know which functions | |
| # Mingw provides and which ones we will be expected to provide. | |
| case "${host}" in | |
| *-*-mingw*) | |
| AC_LIBOBJ([asprintf]) | |
| AC_LIBOBJ([basename]) | |
| AC_LIBOBJ([bcmp]) | |
| AC_LIBOBJ([bcopy]) | |
| AC_LIBOBJ([bzero]) | |
| AC_LIBOBJ([clock]) | |
| AC_LIBOBJ([ffs]) | |
| AC_LIBOBJ([getpagesize]) | |
| AC_LIBOBJ([index]) | |
| AC_LIBOBJ([insque]) | |
| AC_LIBOBJ([mempcpy]) | |
| AC_LIBOBJ([mkstemps]) | |
| AC_LIBOBJ([random]) | |
| AC_LIBOBJ([rindex]) | |
| AC_LIBOBJ([sigsetmask]) | |
| AC_LIBOBJ([stpcpy]) | |
| AC_LIBOBJ([stpncpy]) | |
| AC_LIBOBJ([strndup]) | |
| AC_LIBOBJ([strverscmp]) | |
| AC_LIBOBJ([vasprintf]) | |
| AC_LIBOBJ([waitpid]) | |
| for f in $funcs; do | |
| case "$f" in | |
| asprintf | basename | bcmp | bcopy | bzero | clock | ffs | getpagesize | index | insque | mempcpy | mkstemps | random | rindex | sigsetmask | stpcpy | stpncpy | strdup | strndup | strverscmp | vasprintf | waitpid) | |
| ;; | |
| *) | |
| n=HAVE_`echo $f | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` | |
| AC_DEFINE_UNQUOTED($n) | |
| ;; | |
| esac | |
| done | |
| # Mingw doesnt provide any of the variables in $vars, so we | |
| # dont have to check them here. | |
| # Of the functions in $checkfuncs, Mingw only has strerror. | |
| AC_DEFINE(HAVE_STRERROR) | |
| setobjs=yes | |
| ;; | |
| esac | |
| # We may wish to install the target headers somewhere. | |
| AC_ARG_ENABLE(install-libiberty, | |
| [ --enable-install-libiberty Install headers for end users], | |
| enable_install_libiberty=$enableval, | |
| enable_install_libiberty=no)dnl | |
| # Option parsed, now set things appropriately. | |
| case x"$enable_install_libiberty" in | |
| xyes|x) | |
| target_header_dir=libiberty | |
| ;; | |
| xno) | |
| target_header_dir= | |
| ;; | |
| *) | |
| # This could be sanity-checked in various ways... | |
| target_header_dir="${enable_install_libiberty}" | |
| ;; | |
| esac | |
| else | |
| # Not a target library, so we set things up to run the test suite. | |
| CHECK=really-check | |
| fi | |
| AC_SUBST(CHECK) | |
| AC_SUBST(target_header_dir) | |
| case "${host}" in | |
| *-*-cygwin* | *-*-mingw*) | |
| AC_DEFINE(HAVE_SYS_ERRLIST) | |
| AC_DEFINE(HAVE_SYS_NERR) | |
| ;; | |
| esac | |
| if test -z "${setobjs}"; then | |
| case "${host}" in | |
| *-*-vxworks*) | |
| # Handle VxWorks configuration specially, since on VxWorks the | |
| # libraries are actually on the target board, not in the file | |
| # system. | |
| AC_LIBOBJ([basename]) | |
| AC_LIBOBJ([getpagesize]) | |
| AC_LIBOBJ([insque]) | |
| AC_LIBOBJ([random]) | |
| AC_LIBOBJ([strcasecmp]) | |
| AC_LIBOBJ([strncasecmp]) | |
| AC_LIBOBJ([strdup]) | |
| AC_LIBOBJ([vfork]) | |
| AC_LIBOBJ([waitpid]) | |
| AC_LIBOBJ([vasprintf]) | |
| for f in $funcs; do | |
| case "$f" in | |
| basename | getpagesize | insque | random | strcasecmp) | |
| ;; | |
| strncasecmp | strdup | vfork | waitpid | vasprintf) | |
| ;; | |
| *) | |
| n=HAVE_`echo $f | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` | |
| AC_DEFINE_UNQUOTED($n) | |
| ;; | |
| esac | |
| done | |
| # VxWorks doesn't provide any of the variables in $vars, so we | |
| # don't have to check them here. | |
| # Of the functions in $checkfuncs, VxWorks only has strerror. | |
| AC_DEFINE(HAVE_STRERROR) | |
| setobjs=yes | |
| ;; | |
| *-*-msdosdjgpp) | |
| for f in atexit basename bcmp bcopy bsearch bzero calloc clock ffs \ | |
| getcwd getpagesize getrusage gettimeofday \ | |
| index insque memchr memcmp memcpy memmove memset psignal \ | |
| putenv random rename rindex sbrk setenv stpcpy strcasecmp \ | |
| strchr strdup strerror strncasecmp strrchr strstr strtod \ | |
| strtol strtoul sysconf times tmpnam vfprintf vprintf \ | |
| vsprintf waitpid | |
| do | |
| n=HAVE_`echo $f | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` | |
| AC_DEFINE_UNQUOTED($n) | |
| done | |
| setobjs=yes | |
| ;; | |
| esac | |
| fi | |
| if test -z "${setobjs}"; then | |
| case "${host}" in | |
| *-*-cygwin*) | |
| # The Cygwin library actually uses a couple of files from | |
| # libiberty when it is built. If we are building a native | |
| # Cygwin, and we run the tests, we will appear to have these | |
| # files. However, when we go on to build winsup, we will wind up | |
| # with a library which does not have the files, since they should | |
| # have come from libiberty. | |
| # We handle this by removing the functions the winsup library | |
| # provides from our shell variables, so that they appear to be | |
| # missing. | |
| # DJ - only if we're *building* cygwin, not just building *with* cygwin | |
| if test -n "${with_target_subdir}" | |
| then | |
| funcs="`echo $funcs | sed -e 's/random//'`" | |
| AC_LIBOBJ([random]) | |
| vars="`echo $vars | sed -e 's/sys_siglist//'`" | |
| checkfuncs="`echo $checkfuncs | sed -e 's/strsignal//' -e 's/psignal//'`" | |
| fi | |
| ;; | |
| *-*-mingw32*) | |
| # Under mingw32, sys_nerr and sys_errlist exist, but they are | |
| # macros, so the test below won't find them. | |
| libiberty_cv_var_sys_nerr=yes | |
| libiberty_cv_var_sys_errlist=yes | |
| ;; | |
| *-*-msdosdjgpp*) | |
| # vfork and fork are stubs. | |
| ac_cv_func_vfork_works=no | |
| ;; | |
| *-*-uwin*) | |
| # Under some versions of uwin, vfork is notoriously buggy and the test | |
| # can hang configure; on other versions, vfork exists just as a stub. | |
| # FIXME: This should be removed once vfork in uwin's runtime is fixed. | |
| ac_cv_func_vfork_works=no | |
| # Under uwin 2.0+, sys_nerr and sys_errlist exist, but they are | |
| # macros (actually, these are imported from a DLL, but the end effect | |
| # is the same), so the test below won't find them. | |
| libiberty_cv_var_sys_nerr=yes | |
| libiberty_cv_var_sys_errlist=yes | |
| ;; | |
| *-*-*vms*) | |
| # Under VMS, vfork works very different than on Unix. The standard test | |
| # won't work, and it isn't easily adaptable. It makes more sense to | |
| # just force it. | |
| ac_cv_func_vfork_works=yes | |
| ;; | |
| esac | |
| # We haven't set the list of objects yet. Use the standard autoconf | |
| # tests. This will only work if the compiler works. | |
| AC_ISC_POSIX | |
| AC_REPLACE_FUNCS($funcs) | |
| libiberty_AC_FUNC_C_ALLOCA | |
| AC_FUNC_FORK | |
| if test $ac_cv_func_vfork_works = no; then | |
| AC_LIBOBJ([vfork]) | |
| fi | |
| # We only need _doprnt if we might use it to implement v*printf. | |
| if test $ac_cv_func_vprintf != yes \ | |
| || test $ac_cv_func_vfprintf != yes \ | |
| || test $ac_cv_func_vsprintf != yes; then | |
| AC_REPLACE_FUNCS(_doprnt) | |
| else | |
| AC_CHECK_FUNCS(_doprnt) | |
| fi | |
| for v in $vars; do | |
| AC_MSG_CHECKING([for $v]) | |
| AC_CACHE_VAL(libiberty_cv_var_$v, | |
| [AC_LINK_IFELSE([AC_LANG_PROGRAM([[int *p;]],[[extern int $v []; p = $v;]])], | |
| [eval "libiberty_cv_var_$v=yes"], | |
| [eval "libiberty_cv_var_$v=no"])]) | |
| if eval "test \"`echo '$libiberty_cv_var_'$v`\" = yes"; then | |
| AC_MSG_RESULT(yes) | |
| n=HAVE_`echo $v | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` | |
| AC_DEFINE_UNQUOTED($n) | |
| else | |
| AC_MSG_RESULT(no) | |
| fi | |
| done | |
| # special check for _system_configuration because AIX <4.3.2 do not | |
| # contain the `physmem' member. | |
| AC_MSG_CHECKING([for external symbol _system_configuration]) | |
| AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/systemcfg.h>]], | |
| [[double x = _system_configuration.physmem;]])], | |
| [AC_MSG_RESULT([yes]) | |
| AC_DEFINE(HAVE__SYSTEM_CONFIGURATION, 1, | |
| [Define if you have the _system_configuration variable.])], | |
| [AC_MSG_RESULT([no])]) | |
| AC_CHECK_FUNCS($checkfuncs) | |
| AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf]) | |
| AC_CHECK_DECLS([calloc, getenv, getopt, malloc, realloc, sbrk]) | |
| AC_CHECK_DECLS([strverscmp]) | |
| libiberty_NEED_DECLARATION(canonicalize_file_name) | |
| fi | |
| # Figure out which version of pexecute to use. | |
| case "${host}" in | |
| *-*-mingw* | *-*-winnt*) pexecute=./pex-win32.o ;; | |
| *-*-msdosdjgpp*) pexecute=./pex-djgpp.o ;; | |
| *-*-msdos*) pexecute=./pex-msdos.o ;; | |
| *) pexecute=./pex-unix.o ;; | |
| esac | |
| AC_SUBST(pexecute) | |
| libiberty_AC_FUNC_STRNCMP | |
| # Install a library built with a cross compiler in $(tooldir) rather | |
| # than $(libdir). | |
| if test -z "${with_cross_host}"; then | |
| INSTALL_DEST=libdir | |
| else | |
| INSTALL_DEST=tooldir | |
| fi | |
| AC_SUBST(INSTALL_DEST) | |
| m4_pattern_allow(LIBOBJS) | |
| L="" | |
| for l in x $LIBOBJS; do | |
| case $l in | |
| x) ;; | |
| *) L="$L ./$l" ;; | |
| esac | |
| done | |
| LIBOBJS="$L" | |
| dnl Required by html and install-html | |
| AC_SUBST(datarootdir) | |
| AC_SUBST(docdir) | |
| AC_SUBST(htmldir) | |
| # We need multilib support, but only if configuring for the target. | |
| AC_CONFIG_FILES([Makefile testsuite/Makefile]) | |
| AC_CONFIG_COMMANDS([default], | |
| [[test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h | |
| if test -n "$CONFIG_FILES"; then | |
| if test -n "${with_target_subdir}"; then | |
| # FIXME: We shouldn't need to set ac_file | |
| ac_file=Makefile | |
| LD="${ORIGINAL_LD_FOR_MULTILIBS}" | |
| . ${libiberty_topdir}/config-ml.in | |
| fi | |
| fi]], | |
| [[srcdir=${srcdir} | |
| host=${host} | |
| target=${target} | |
| with_target_subdir=${with_target_subdir} | |
| with_multisubdir=${with_multisubdir} | |
| ac_configure_args="--enable-multilib ${ac_configure_args}" | |
| CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} | |
| ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}" | |
| libiberty_topdir=${libiberty_topdir} | |
| ]]) | |
| AC_OUTPUT |