| /* Print mips instructions for GDB, the GNU debugger, or for objdump. | |
| Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, | |
| 2000, 2001, 2002, 2003, 2005, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp). | |
| This file is part of the GNU opcodes library. | |
| This library is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3, or (at your option) | |
| any later version. | |
| It is distributed in the hope that it will be useful, but WITHOUT | |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public | |
| License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, | |
| MA 02110-1301, USA. */ | |
| #include "sysdep.h" | |
| #include "dis-asm.h" | |
| #include "libiberty.h" | |
| #include "opcode/mips.h" | |
| #include "opintl.h" | |
| /* FIXME: These are needed to figure out if the code is mips16 or | |
| not. The low bit of the address is often a good indicator. No | |
| symbol table is available when this code runs out in an embedded | |
| system as when it is used for disassembler support in a monitor. */ | |
| #if !defined(EMBEDDED_ENV) | |
| #define SYMTAB_AVAILABLE 1 | |
| #include "elf-bfd.h" | |
| #include "elf/mips.h" | |
| #endif | |
| /* Mips instructions are at maximum this many bytes long. */ | |
| #define INSNLEN 4 | |
| /* FIXME: These should be shared with gdb somehow. */ | |
| struct mips_cp0sel_name | |
| { | |
| unsigned int cp0reg; | |
| unsigned int sel; | |
| const char * const name; | |
| }; | |
| /* The mips16 registers. */ | |
| static const unsigned int mips16_to_32_reg_map[] = | |
| { | |
| 16, 17, 2, 3, 4, 5, 6, 7 | |
| }; | |
| #define mips16_reg_names(rn) mips_gpr_names[mips16_to_32_reg_map[rn]] | |
| static const char * const mips_gpr_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_gpr_names_oldabi[32] = | |
| { | |
| "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", | |
| "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", | |
| "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", | |
| "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" | |
| }; | |
| static const char * const mips_gpr_names_newabi[32] = | |
| { | |
| "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", | |
| "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3", | |
| "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", | |
| "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" | |
| }; | |
| static const char * const mips_fpr_names_numeric[32] = | |
| { | |
| "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", | |
| "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", | |
| "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", | |
| "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31" | |
| }; | |
| static const char * const mips_fpr_names_32[32] = | |
| { | |
| "fv0", "fv0f", "fv1", "fv1f", "ft0", "ft0f", "ft1", "ft1f", | |
| "ft2", "ft2f", "ft3", "ft3f", "fa0", "fa0f", "fa1", "fa1f", | |
| "ft4", "ft4f", "ft5", "ft5f", "fs0", "fs0f", "fs1", "fs1f", | |
| "fs2", "fs2f", "fs3", "fs3f", "fs4", "fs4f", "fs5", "fs5f" | |
| }; | |
| static const char * const mips_fpr_names_n32[32] = | |
| { | |
| "fv0", "ft14", "fv1", "ft15", "ft0", "ft1", "ft2", "ft3", | |
| "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", | |
| "fa4", "fa5", "fa6", "fa7", "fs0", "ft8", "fs1", "ft9", | |
| "fs2", "ft10", "fs3", "ft11", "fs4", "ft12", "fs5", "ft13" | |
| }; | |
| static const char * const mips_fpr_names_64[32] = | |
| { | |
| "fv0", "ft12", "fv1", "ft13", "ft0", "ft1", "ft2", "ft3", | |
| "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", | |
| "fa4", "fa5", "fa6", "fa7", "ft8", "ft9", "ft10", "ft11", | |
| "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7" | |
| }; | |
| static const char * const mips_cp0_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_cp0_names_r3000[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo", "$3", | |
| "c0_context", "$5", "$6", "$7", | |
| "c0_badvaddr", "$9", "c0_entryhi", "$11", | |
| "c0_sr", "c0_cause", "c0_epc", "c0_prid", | |
| "$16", "$17", "$18", "$19", | |
| "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", | |
| "$28", "$29", "$30", "$31", | |
| }; | |
| static const char * const mips_cp0_names_r4000[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_sr", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "$23", | |
| "$24", "$25", "c0_ecc", "c0_cacheerr", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "$31", | |
| }; | |
| static const char * const mips_cp0_names_mips3264[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", | |
| }; | |
| static const struct mips_cp0sel_name mips_cp0sel_names_mips3264[] = | |
| { | |
| { 16, 1, "c0_config1" }, | |
| { 16, 2, "c0_config2" }, | |
| { 16, 3, "c0_config3" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 18, 2, "c0_watchlo,2" }, | |
| { 18, 3, "c0_watchlo,3" }, | |
| { 18, 4, "c0_watchlo,4" }, | |
| { 18, 5, "c0_watchlo,5" }, | |
| { 18, 6, "c0_watchlo,6" }, | |
| { 18, 7, "c0_watchlo,7" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 19, 2, "c0_watchhi,2" }, | |
| { 19, 3, "c0_watchhi,3" }, | |
| { 19, 4, "c0_watchhi,4" }, | |
| { 19, 5, "c0_watchhi,5" }, | |
| { 19, 6, "c0_watchhi,6" }, | |
| { 19, 7, "c0_watchhi,7" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 27, 1, "c0_cacheerr,1" }, | |
| { 27, 2, "c0_cacheerr,2" }, | |
| { 27, 3, "c0_cacheerr,3" }, | |
| { 28, 1, "c0_datalo" }, | |
| { 29, 1, "c0_datahi" } | |
| }; | |
| static const char * const mips_cp0_names_mips3264r2[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "c0_hwrena", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", | |
| }; | |
| static const struct mips_cp0sel_name mips_cp0sel_names_mips3264r2[] = | |
| { | |
| { 4, 1, "c0_contextconfig" }, | |
| { 0, 1, "c0_mvpcontrol" }, | |
| { 0, 2, "c0_mvpconf0" }, | |
| { 0, 3, "c0_mvpconf1" }, | |
| { 1, 1, "c0_vpecontrol" }, | |
| { 1, 2, "c0_vpeconf0" }, | |
| { 1, 3, "c0_vpeconf1" }, | |
| { 1, 4, "c0_yqmask" }, | |
| { 1, 5, "c0_vpeschedule" }, | |
| { 1, 6, "c0_vpeschefback" }, | |
| { 2, 1, "c0_tcstatus" }, | |
| { 2, 2, "c0_tcbind" }, | |
| { 2, 3, "c0_tcrestart" }, | |
| { 2, 4, "c0_tchalt" }, | |
| { 2, 5, "c0_tccontext" }, | |
| { 2, 6, "c0_tcschedule" }, | |
| { 2, 7, "c0_tcschefback" }, | |
| { 5, 1, "c0_pagegrain" }, | |
| { 6, 1, "c0_srsconf0" }, | |
| { 6, 2, "c0_srsconf1" }, | |
| { 6, 3, "c0_srsconf2" }, | |
| { 6, 4, "c0_srsconf3" }, | |
| { 6, 5, "c0_srsconf4" }, | |
| { 12, 1, "c0_intctl" }, | |
| { 12, 2, "c0_srsctl" }, | |
| { 12, 3, "c0_srsmap" }, | |
| { 15, 1, "c0_ebase" }, | |
| { 16, 1, "c0_config1" }, | |
| { 16, 2, "c0_config2" }, | |
| { 16, 3, "c0_config3" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 18, 2, "c0_watchlo,2" }, | |
| { 18, 3, "c0_watchlo,3" }, | |
| { 18, 4, "c0_watchlo,4" }, | |
| { 18, 5, "c0_watchlo,5" }, | |
| { 18, 6, "c0_watchlo,6" }, | |
| { 18, 7, "c0_watchlo,7" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 19, 2, "c0_watchhi,2" }, | |
| { 19, 3, "c0_watchhi,3" }, | |
| { 19, 4, "c0_watchhi,4" }, | |
| { 19, 5, "c0_watchhi,5" }, | |
| { 19, 6, "c0_watchhi,6" }, | |
| { 19, 7, "c0_watchhi,7" }, | |
| { 23, 1, "c0_tracecontrol" }, | |
| { 23, 2, "c0_tracecontrol2" }, | |
| { 23, 3, "c0_usertracedata" }, | |
| { 23, 4, "c0_tracebpc" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 27, 1, "c0_cacheerr,1" }, | |
| { 27, 2, "c0_cacheerr,2" }, | |
| { 27, 3, "c0_cacheerr,3" }, | |
| { 28, 1, "c0_datalo" }, | |
| { 28, 2, "c0_taglo1" }, | |
| { 28, 3, "c0_datalo1" }, | |
| { 28, 4, "c0_taglo2" }, | |
| { 28, 5, "c0_datalo2" }, | |
| { 28, 6, "c0_taglo3" }, | |
| { 28, 7, "c0_datalo3" }, | |
| { 29, 1, "c0_datahi" }, | |
| { 29, 2, "c0_taghi1" }, | |
| { 29, 3, "c0_datahi1" }, | |
| { 29, 4, "c0_taghi2" }, | |
| { 29, 5, "c0_datahi2" }, | |
| { 29, 6, "c0_taghi3" }, | |
| { 29, 7, "c0_datahi3" }, | |
| }; | |
| /* SB-1: MIPS64 (mips_cp0_names_mips3264) with minor mods. */ | |
| static const char * const mips_cp0_names_sb1[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", | |
| "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", | |
| }; | |
| static const struct mips_cp0sel_name mips_cp0sel_names_sb1[] = | |
| { | |
| { 16, 1, "c0_config1" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 22, 0, "c0_perftrace" }, | |
| { 23, 3, "c0_edebug" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 26, 1, "c0_buserr_pa" }, | |
| { 27, 1, "c0_cacheerr_d" }, | |
| { 27, 3, "c0_cacheerr_d_pa" }, | |
| { 28, 1, "c0_datalo_i" }, | |
| { 28, 2, "c0_taglo_d" }, | |
| { 28, 3, "c0_datalo_d" }, | |
| { 29, 1, "c0_datahi_i" }, | |
| { 29, 2, "c0_taghi_d" }, | |
| { 29, 3, "c0_datahi_d" }, | |
| }; | |
| static const char * const mips_hwr_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_hwr_names_mips3264r2[32] = | |
| { | |
| "hwr_cpunum", "hwr_synci_step", "hwr_cc", "hwr_ccres", | |
| "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| struct mips_abi_choice | |
| { | |
| const char * name; | |
| const char * const *gpr_names; | |
| const char * const *fpr_names; | |
| }; | |
| struct mips_abi_choice mips_abi_choices[] = | |
| { | |
| { "numeric", mips_gpr_names_numeric, mips_fpr_names_numeric }, | |
| { "32", mips_gpr_names_oldabi, mips_fpr_names_32 }, | |
| { "n32", mips_gpr_names_newabi, mips_fpr_names_n32 }, | |
| { "64", mips_gpr_names_newabi, mips_fpr_names_64 }, | |
| }; | |
| struct mips_arch_choice | |
| { | |
| const char *name; | |
| int bfd_mach_valid; | |
| unsigned long bfd_mach; | |
| int processor; | |
| int isa; | |
| const char * const *cp0_names; | |
| const struct mips_cp0sel_name *cp0sel_names; | |
| unsigned int cp0sel_names_len; | |
| const char * const *hwr_names; | |
| }; | |
| const struct mips_arch_choice mips_arch_choices[] = | |
| { | |
| { "numeric", 0, 0, 0, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r3000", 1, bfd_mach_mips3000, CPU_R3000, ISA_MIPS1, | |
| mips_cp0_names_r3000, NULL, 0, mips_hwr_names_numeric }, | |
| { "r3900", 1, bfd_mach_mips3900, CPU_R3900, ISA_MIPS1, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r4000", 1, bfd_mach_mips4000, CPU_R4000, ISA_MIPS3, | |
| mips_cp0_names_r4000, NULL, 0, mips_hwr_names_numeric }, | |
| { "r4010", 1, bfd_mach_mips4010, CPU_R4010, ISA_MIPS2, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "vr4100", 1, bfd_mach_mips4100, CPU_VR4100, ISA_MIPS3, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "vr4111", 1, bfd_mach_mips4111, CPU_R4111, ISA_MIPS3, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "vr4120", 1, bfd_mach_mips4120, CPU_VR4120, ISA_MIPS3, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r4300", 1, bfd_mach_mips4300, CPU_R4300, ISA_MIPS3, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r4400", 1, bfd_mach_mips4400, CPU_R4400, ISA_MIPS3, | |
| mips_cp0_names_r4000, NULL, 0, mips_hwr_names_numeric }, | |
| { "r4600", 1, bfd_mach_mips4600, CPU_R4600, ISA_MIPS3, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r4650", 1, bfd_mach_mips4650, CPU_R4650, ISA_MIPS3, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r5000", 1, bfd_mach_mips5000, CPU_R5000, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "vr5400", 1, bfd_mach_mips5400, CPU_VR5400, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "vr5500", 1, bfd_mach_mips5500, CPU_VR5500, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r6000", 1, bfd_mach_mips6000, CPU_R6000, ISA_MIPS2, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "rm7000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "rm9000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r8000", 1, bfd_mach_mips8000, CPU_R8000, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r10000", 1, bfd_mach_mips10000, CPU_R10000, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "r12000", 1, bfd_mach_mips12000, CPU_R12000, ISA_MIPS4, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| { "mips5", 1, bfd_mach_mips5, CPU_MIPS5, ISA_MIPS5, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| /* For stock MIPS32, disassemble all applicable MIPS-specified ASEs. | |
| Note that MIPS-3D and MDMX are not applicable to MIPS32. (See | |
| _MIPS32 Architecture For Programmers Volume I: Introduction to the | |
| MIPS32 Architecture_ (MIPS Document Number MD00082, Revision 0.95), | |
| page 1. */ | |
| { "mips32", 1, bfd_mach_mipsisa32, CPU_MIPS32, | |
| ISA_MIPS32 | INSN_MIPS16 | INSN_SMARTMIPS, | |
| mips_cp0_names_mips3264, | |
| mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), | |
| mips_hwr_names_numeric }, | |
| { "mips32r2", 1, bfd_mach_mipsisa32r2, CPU_MIPS32R2, | |
| (ISA_MIPS32R2 | INSN_MIPS16 | INSN_SMARTMIPS | INSN_DSP | INSN_DSPR2 | |
| | INSN_MIPS3D | INSN_MT), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_hwr_names_mips3264r2 }, | |
| /* For stock MIPS64, disassemble all applicable MIPS-specified ASEs. */ | |
| { "mips64", 1, bfd_mach_mipsisa64, CPU_MIPS64, | |
| ISA_MIPS64 | INSN_MIPS16 | INSN_MIPS3D | INSN_MDMX, | |
| mips_cp0_names_mips3264, | |
| mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), | |
| mips_hwr_names_numeric }, | |
| { "mips64r2", 1, bfd_mach_mipsisa64r2, CPU_MIPS64R2, | |
| (ISA_MIPS64R2 | INSN_MIPS16 | INSN_MIPS3D | INSN_DSP | INSN_DSPR2 | |
| | INSN_DSP64 | INSN_MT | INSN_MDMX), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_hwr_names_mips3264r2 }, | |
| { "sb1", 1, bfd_mach_mips_sb1, CPU_SB1, | |
| ISA_MIPS64 | INSN_MIPS3D | INSN_SB1, | |
| mips_cp0_names_sb1, | |
| mips_cp0sel_names_sb1, ARRAY_SIZE (mips_cp0sel_names_sb1), | |
| mips_hwr_names_numeric }, | |
| { "loongson2e", 1, bfd_mach_mips_loongson_2e, CPU_LOONGSON_2E, | |
| ISA_MIPS3 | INSN_LOONGSON_2E, mips_cp0_names_numeric, | |
| NULL, 0, mips_hwr_names_numeric }, | |
| { "loongson2f", 1, bfd_mach_mips_loongson_2f, CPU_LOONGSON_2F, | |
| ISA_MIPS3 | INSN_LOONGSON_2F, mips_cp0_names_numeric, | |
| NULL, 0, mips_hwr_names_numeric }, | |
| { "octeon", 1, bfd_mach_mips_octeon, CPU_OCTEON, | |
| ISA_MIPS64R2 | INSN_OCTEON, mips_cp0_names_numeric, NULL, 0, | |
| mips_hwr_names_numeric }, | |
| /* This entry, mips16, is here only for ISA/processor selection; do | |
| not print its name. */ | |
| { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS3 | INSN_MIPS16, | |
| mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric }, | |
| }; | |
| /* ISA and processor type to disassemble for, and register names to use. | |
| set_default_mips_dis_options and parse_mips_dis_options fill in these | |
| values. */ | |
| static int mips_processor; | |
| static int mips_isa; | |
| static const char * const *mips_gpr_names; | |
| static const char * const *mips_fpr_names; | |
| static const char * const *mips_cp0_names; | |
| static const struct mips_cp0sel_name *mips_cp0sel_names; | |
| static int mips_cp0sel_names_len; | |
| static const char * const *mips_hwr_names; | |
| /* Other options */ | |
| static int no_aliases; /* If set disassemble as most general inst. */ | |
| static const struct mips_abi_choice * | |
| choose_abi_by_name (const char *name, unsigned int namelen) | |
| { | |
| const struct mips_abi_choice *c; | |
| unsigned int i; | |
| for (i = 0, c = NULL; i < ARRAY_SIZE (mips_abi_choices) && c == NULL; i++) | |
| if (strncmp (mips_abi_choices[i].name, name, namelen) == 0 | |
| && strlen (mips_abi_choices[i].name) == namelen) | |
| c = &mips_abi_choices[i]; | |
| return c; | |
| } | |
| static const struct mips_arch_choice * | |
| choose_arch_by_name (const char *name, unsigned int namelen) | |
| { | |
| const struct mips_arch_choice *c = NULL; | |
| unsigned int i; | |
| for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) | |
| if (strncmp (mips_arch_choices[i].name, name, namelen) == 0 | |
| && strlen (mips_arch_choices[i].name) == namelen) | |
| c = &mips_arch_choices[i]; | |
| return c; | |
| } | |
| static const struct mips_arch_choice * | |
| choose_arch_by_number (unsigned long mach) | |
| { | |
| static unsigned long hint_bfd_mach; | |
| static const struct mips_arch_choice *hint_arch_choice; | |
| const struct mips_arch_choice *c; | |
| unsigned int i; | |
| /* We optimize this because even if the user specifies no | |
| flags, this will be done for every instruction! */ | |
| if (hint_bfd_mach == mach | |
| && hint_arch_choice != NULL | |
| && hint_arch_choice->bfd_mach == hint_bfd_mach) | |
| return hint_arch_choice; | |
| for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) | |
| { | |
| if (mips_arch_choices[i].bfd_mach_valid | |
| && mips_arch_choices[i].bfd_mach == mach) | |
| { | |
| c = &mips_arch_choices[i]; | |
| hint_bfd_mach = mach; | |
| hint_arch_choice = c; | |
| } | |
| } | |
| return c; | |
| } | |
| /* Check if the object uses NewABI conventions. */ | |
| static int | |
| is_newabi (Elf_Internal_Ehdr *header) | |
| { | |
| /* There are no old-style ABIs which use 64-bit ELF. */ | |
| if (header->e_ident[EI_CLASS] == ELFCLASS64) | |
| return 1; | |
| /* If a 32-bit ELF file, n32 is a new-style ABI. */ | |
| if ((header->e_flags & EF_MIPS_ABI2) != 0) | |
| return 1; | |
| return 0; | |
| } | |
| static void | |
| set_default_mips_dis_options (struct disassemble_info *info) | |
| { | |
| const struct mips_arch_choice *chosen_arch; | |
| /* Defaults: mipsIII/r3000 (?!), (o)32-style ("oldabi") GPR names, | |
| and numeric FPR, CP0 register, and HWR names. */ | |
| mips_isa = ISA_MIPS3; | |
| mips_processor = CPU_R3000; | |
| mips_gpr_names = mips_gpr_names_oldabi; | |
| mips_fpr_names = mips_fpr_names_numeric; | |
| mips_cp0_names = mips_cp0_names_numeric; | |
| mips_cp0sel_names = NULL; | |
| mips_cp0sel_names_len = 0; | |
| mips_hwr_names = mips_hwr_names_numeric; | |
| no_aliases = 0; | |
| /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */ | |
| if (info->flavour == bfd_target_elf_flavour && info->section != NULL) | |
| { | |
| Elf_Internal_Ehdr *header; | |
| header = elf_elfheader (info->section->owner); | |
| if (is_newabi (header)) | |
| mips_gpr_names = mips_gpr_names_newabi; | |
| } | |
| /* Set ISA, architecture, and cp0 register names as best we can. */ | |
| #if ! SYMTAB_AVAILABLE | |
| /* This is running out on a target machine, not in a host tool. | |
| FIXME: Where does mips_target_info come from? */ | |
| target_processor = mips_target_info.processor; | |
| mips_isa = mips_target_info.isa; | |
| #else | |
| chosen_arch = choose_arch_by_number (info->mach); | |
| if (chosen_arch != NULL) | |
| { | |
| mips_processor = chosen_arch->processor; | |
| mips_isa = chosen_arch->isa; | |
| mips_cp0_names = chosen_arch->cp0_names; | |
| mips_cp0sel_names = chosen_arch->cp0sel_names; | |
| mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; | |
| mips_hwr_names = chosen_arch->hwr_names; | |
| } | |
| #endif | |
| } | |
| static void | |
| parse_mips_dis_option (const char *option, unsigned int len) | |
| { | |
| unsigned int i, optionlen, vallen; | |
| const char *val; | |
| const struct mips_abi_choice *chosen_abi; | |
| const struct mips_arch_choice *chosen_arch; | |
| /* Try to match options that are simple flags */ | |
| if (CONST_STRNEQ (option, "no-aliases")) | |
| { | |
| no_aliases = 1; | |
| return; | |
| } | |
| /* Look for the = that delimits the end of the option name. */ | |
| for (i = 0; i < len; i++) | |
| if (option[i] == '=') | |
| break; | |
| if (i == 0) /* Invalid option: no name before '='. */ | |
| return; | |
| if (i == len) /* Invalid option: no '='. */ | |
| return; | |
| if (i == (len - 1)) /* Invalid option: no value after '='. */ | |
| return; | |
| optionlen = i; | |
| val = option + (optionlen + 1); | |
| vallen = len - (optionlen + 1); | |
| if (strncmp ("gpr-names", option, optionlen) == 0 | |
| && strlen ("gpr-names") == optionlen) | |
| { | |
| chosen_abi = choose_abi_by_name (val, vallen); | |
| if (chosen_abi != NULL) | |
| mips_gpr_names = chosen_abi->gpr_names; | |
| return; | |
| } | |
| if (strncmp ("fpr-names", option, optionlen) == 0 | |
| && strlen ("fpr-names") == optionlen) | |
| { | |
| chosen_abi = choose_abi_by_name (val, vallen); | |
| if (chosen_abi != NULL) | |
| mips_fpr_names = chosen_abi->fpr_names; | |
| return; | |
| } | |
| if (strncmp ("cp0-names", option, optionlen) == 0 | |
| && strlen ("cp0-names") == optionlen) | |
| { | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| { | |
| mips_cp0_names = chosen_arch->cp0_names; | |
| mips_cp0sel_names = chosen_arch->cp0sel_names; | |
| mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; | |
| } | |
| return; | |
| } | |
| if (strncmp ("hwr-names", option, optionlen) == 0 | |
| && strlen ("hwr-names") == optionlen) | |
| { | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| mips_hwr_names = chosen_arch->hwr_names; | |
| return; | |
| } | |
| if (strncmp ("reg-names", option, optionlen) == 0 | |
| && strlen ("reg-names") == optionlen) | |
| { | |
| /* We check both ABI and ARCH here unconditionally, so | |
| that "numeric" will do the desirable thing: select | |
| numeric register names for all registers. Other than | |
| that, a given name probably won't match both. */ | |
| chosen_abi = choose_abi_by_name (val, vallen); | |
| if (chosen_abi != NULL) | |
| { | |
| mips_gpr_names = chosen_abi->gpr_names; | |
| mips_fpr_names = chosen_abi->fpr_names; | |
| } | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| { | |
| mips_cp0_names = chosen_arch->cp0_names; | |
| mips_cp0sel_names = chosen_arch->cp0sel_names; | |
| mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; | |
| mips_hwr_names = chosen_arch->hwr_names; | |
| } | |
| return; | |
| } | |
| /* Invalid option. */ | |
| } | |
| static void | |
| parse_mips_dis_options (const char *options) | |
| { | |
| const char *option_end; | |
| if (options == NULL) | |
| return; | |
| while (*options != '\0') | |
| { | |
| /* Skip empty options. */ | |
| if (*options == ',') | |
| { | |
| options++; | |
| continue; | |
| } | |
| /* We know that *options is neither NUL or a comma. */ | |
| option_end = options + 1; | |
| while (*option_end != ',' && *option_end != '\0') | |
| option_end++; | |
| parse_mips_dis_option (options, option_end - options); | |
| /* Go on to the next one. If option_end points to a comma, it | |
| will be skipped above. */ | |
| options = option_end; | |
| } | |
| } | |
| static const struct mips_cp0sel_name * | |
| lookup_mips_cp0sel_name (const struct mips_cp0sel_name *names, | |
| unsigned int len, | |
| unsigned int cp0reg, | |
| unsigned int sel) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < len; i++) | |
| if (names[i].cp0reg == cp0reg && names[i].sel == sel) | |
| return &names[i]; | |
| return NULL; | |
| } | |
| /* Print insn arguments for 32/64-bit code. */ | |
| static void | |
| print_insn_args (const char *d, | |
| register unsigned long int l, | |
| bfd_vma pc, | |
| struct disassemble_info *info, | |
| const struct mips_opcode *opp) | |
| { | |
| int op, delta; | |
| unsigned int lsb, msb, msbd; | |
| lsb = 0; | |
| for (; *d != '\0'; d++) | |
| { | |
| switch (*d) | |
| { | |
| case ',': | |
| case '(': | |
| case ')': | |
| case '[': | |
| case ']': | |
| (*info->fprintf_func) (info->stream, "%c", *d); | |
| break; | |
| case '+': | |
| /* Extension character; switch for second char. */ | |
| d++; | |
| switch (*d) | |
| { | |
| case '\0': | |
| /* xgettext:c-format */ | |
| (*info->fprintf_func) (info->stream, | |
| _("# internal error, incomplete extension sequence (+)")); | |
| return; | |
| case 'A': | |
| lsb = (l >> OP_SH_SHAMT) & OP_MASK_SHAMT; | |
| (*info->fprintf_func) (info->stream, "0x%x", lsb); | |
| break; | |
| case 'B': | |
| msb = (l >> OP_SH_INSMSB) & OP_MASK_INSMSB; | |
| (*info->fprintf_func) (info->stream, "0x%x", msb - lsb + 1); | |
| break; | |
| case '1': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_UDI1) & OP_MASK_UDI1); | |
| break; | |
| case '2': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_UDI2) & OP_MASK_UDI2); | |
| break; | |
| case '3': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_UDI3) & OP_MASK_UDI3); | |
| break; | |
| case '4': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_UDI4) & OP_MASK_UDI4); | |
| break; | |
| case 'C': | |
| case 'H': | |
| msbd = (l >> OP_SH_EXTMSBD) & OP_MASK_EXTMSBD; | |
| (*info->fprintf_func) (info->stream, "0x%x", msbd + 1); | |
| break; | |
| case 'D': | |
| { | |
| const struct mips_cp0sel_name *n; | |
| unsigned int cp0reg, sel; | |
| cp0reg = (l >> OP_SH_RD) & OP_MASK_RD; | |
| sel = (l >> OP_SH_SEL) & OP_MASK_SEL; | |
| /* CP0 register including 'sel' code for mtcN (et al.), to be | |
| printed textually if known. If not known, print both | |
| CP0 register name and sel numerically since CP0 register | |
| with sel 0 may have a name unrelated to register being | |
| printed. */ | |
| n = lookup_mips_cp0sel_name(mips_cp0sel_names, | |
| mips_cp0sel_names_len, cp0reg, sel); | |
| if (n != NULL) | |
| (*info->fprintf_func) (info->stream, "%s", n->name); | |
| else | |
| (*info->fprintf_func) (info->stream, "$%d,%d", cp0reg, sel); | |
| break; | |
| } | |
| case 'E': | |
| lsb = ((l >> OP_SH_SHAMT) & OP_MASK_SHAMT) + 32; | |
| (*info->fprintf_func) (info->stream, "0x%x", lsb); | |
| break; | |
| case 'F': | |
| msb = ((l >> OP_SH_INSMSB) & OP_MASK_INSMSB) + 32; | |
| (*info->fprintf_func) (info->stream, "0x%x", msb - lsb + 1); | |
| break; | |
| case 'G': | |
| msbd = ((l >> OP_SH_EXTMSBD) & OP_MASK_EXTMSBD) + 32; | |
| (*info->fprintf_func) (info->stream, "0x%x", msbd + 1); | |
| break; | |
| case 't': /* Coprocessor 0 reg name */ | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_cp0_names[(l >> OP_SH_RT) & | |
| OP_MASK_RT]); | |
| break; | |
| case 'T': /* Coprocessor 0 reg name */ | |
| { | |
| const struct mips_cp0sel_name *n; | |
| unsigned int cp0reg, sel; | |
| cp0reg = (l >> OP_SH_RT) & OP_MASK_RT; | |
| sel = (l >> OP_SH_SEL) & OP_MASK_SEL; | |
| /* CP0 register including 'sel' code for mftc0, to be | |
| printed textually if known. If not known, print both | |
| CP0 register name and sel numerically since CP0 register | |
| with sel 0 may have a name unrelated to register being | |
| printed. */ | |
| n = lookup_mips_cp0sel_name(mips_cp0sel_names, | |
| mips_cp0sel_names_len, cp0reg, sel); | |
| if (n != NULL) | |
| (*info->fprintf_func) (info->stream, "%s", n->name); | |
| else | |
| (*info->fprintf_func) (info->stream, "$%d,%d", cp0reg, sel); | |
| break; | |
| } | |
| case 'x': /* bbit bit index */ | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_BBITIND) & OP_MASK_BBITIND); | |
| break; | |
| case 'p': /* cins, cins32, exts and exts32 position */ | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CINSPOS) & OP_MASK_CINSPOS); | |
| break; | |
| case 's': /* cins and exts length-minus-one */ | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CINSLM1) & OP_MASK_CINSLM1); | |
| break; | |
| case 'S': /* cins32 and exts32 length-minus-one field */ | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CINSLM1) & OP_MASK_CINSLM1); | |
| break; | |
| case 'Q': /* seqi/snei immediate field */ | |
| op = (l >> OP_SH_SEQI) & OP_MASK_SEQI; | |
| /* Sign-extend it. */ | |
| op = (op ^ 512) - 512; | |
| (*info->fprintf_func) (info->stream, "%d", op); | |
| break; | |
| default: | |
| /* xgettext:c-format */ | |
| (*info->fprintf_func) (info->stream, | |
| _("# internal error, undefined extension sequence (+%c)"), | |
| *d); | |
| return; | |
| } | |
| break; | |
| case '2': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_BP) & OP_MASK_BP); | |
| break; | |
| case '3': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_SA3) & OP_MASK_SA3); | |
| break; | |
| case '4': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_SA4) & OP_MASK_SA4); | |
| break; | |
| case '5': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_IMM8) & OP_MASK_IMM8); | |
| break; | |
| case '6': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_RS) & OP_MASK_RS); | |
| break; | |
| case '7': | |
| (*info->fprintf_func) (info->stream, "$ac%ld", | |
| (l >> OP_SH_DSPACC) & OP_MASK_DSPACC); | |
| break; | |
| case '8': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_WRDSP) & OP_MASK_WRDSP); | |
| break; | |
| case '9': | |
| (*info->fprintf_func) (info->stream, "$ac%ld", | |
| (l >> OP_SH_DSPACC_S) & OP_MASK_DSPACC_S); | |
| break; | |
| case '0': /* dsp 6-bit signed immediate in bit 20 */ | |
| delta = ((l >> OP_SH_DSPSFT) & OP_MASK_DSPSFT); | |
| if (delta & 0x20) /* test sign bit */ | |
| delta |= ~OP_MASK_DSPSFT; | |
| (*info->fprintf_func) (info->stream, "%d", delta); | |
| break; | |
| case ':': /* dsp 7-bit signed immediate in bit 19 */ | |
| delta = ((l >> OP_SH_DSPSFT_7) & OP_MASK_DSPSFT_7); | |
| if (delta & 0x40) /* test sign bit */ | |
| delta |= ~OP_MASK_DSPSFT_7; | |
| (*info->fprintf_func) (info->stream, "%d", delta); | |
| break; | |
| case '\'': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_RDDSP) & OP_MASK_RDDSP); | |
| break; | |
| case '@': /* dsp 10-bit signed immediate in bit 16 */ | |
| delta = ((l >> OP_SH_IMM10) & OP_MASK_IMM10); | |
| if (delta & 0x200) /* test sign bit */ | |
| delta |= ~OP_MASK_IMM10; | |
| (*info->fprintf_func) (info->stream, "%d", delta); | |
| break; | |
| case '!': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_MT_U) & OP_MASK_MT_U); | |
| break; | |
| case '$': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_MT_H) & OP_MASK_MT_H); | |
| break; | |
| case '*': | |
| (*info->fprintf_func) (info->stream, "$ac%ld", | |
| (l >> OP_SH_MTACC_T) & OP_MASK_MTACC_T); | |
| break; | |
| case '&': | |
| (*info->fprintf_func) (info->stream, "$ac%ld", | |
| (l >> OP_SH_MTACC_D) & OP_MASK_MTACC_D); | |
| break; | |
| case 'g': | |
| /* Coprocessor register for CTTC1, MTTC2, MTHC2, CTTC2. */ | |
| (*info->fprintf_func) (info->stream, "$%ld", | |
| (l >> OP_SH_RD) & OP_MASK_RD); | |
| break; | |
| case 's': | |
| case 'b': | |
| case 'r': | |
| case 'v': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[(l >> OP_SH_RS) & OP_MASK_RS]); | |
| break; | |
| case 't': | |
| case 'w': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[(l >> OP_SH_RT) & OP_MASK_RT]); | |
| break; | |
| case 'i': | |
| case 'u': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_IMMEDIATE) & OP_MASK_IMMEDIATE); | |
| break; | |
| case 'j': /* Same as i, but sign-extended. */ | |
| case 'o': | |
| delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA; | |
| if (delta & 0x8000) | |
| delta |= ~0xffff; | |
| (*info->fprintf_func) (info->stream, "%d", | |
| delta); | |
| break; | |
| case 'h': | |
| (*info->fprintf_func) (info->stream, "0x%x", | |
| (unsigned int) ((l >> OP_SH_PREFX) | |
| & OP_MASK_PREFX)); | |
| break; | |
| case 'k': | |
| (*info->fprintf_func) (info->stream, "0x%x", | |
| (unsigned int) ((l >> OP_SH_CACHE) | |
| & OP_MASK_CACHE)); | |
| break; | |
| case 'a': | |
| info->target = (((pc + 4) & ~(bfd_vma) 0x0fffffff) | |
| | (((l >> OP_SH_TARGET) & OP_MASK_TARGET) << 2)); | |
| /* For gdb disassembler, force odd address on jalx. */ | |
| if (info->flavour == bfd_target_unknown_flavour | |
| && strcmp (opp->name, "jalx") == 0) | |
| info->target |= 1; | |
| (*info->print_address_func) (info->target, info); | |
| break; | |
| case 'p': | |
| /* Sign extend the displacement. */ | |
| delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA; | |
| if (delta & 0x8000) | |
| delta |= ~0xffff; | |
| info->target = (delta << 2) + pc + INSNLEN; | |
| (*info->print_address_func) (info->target, info); | |
| break; | |
| case 'd': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[(l >> OP_SH_RD) & OP_MASK_RD]); | |
| break; | |
| case 'U': | |
| { | |
| /* First check for both rd and rt being equal. */ | |
| unsigned int reg = (l >> OP_SH_RD) & OP_MASK_RD; | |
| if (reg == ((l >> OP_SH_RT) & OP_MASK_RT)) | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[reg]); | |
| else | |
| { | |
| /* If one is zero use the other. */ | |
| if (reg == 0) | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[(l >> OP_SH_RT) & OP_MASK_RT]); | |
| else if (((l >> OP_SH_RT) & OP_MASK_RT) == 0) | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[reg]); | |
| else /* Bogus, result depends on processor. */ | |
| (*info->fprintf_func) (info->stream, "%s or %s", | |
| mips_gpr_names[reg], | |
| mips_gpr_names[(l >> OP_SH_RT) & OP_MASK_RT]); | |
| } | |
| } | |
| break; | |
| case 'z': | |
| (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[0]); | |
| break; | |
| case '<': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_SHAMT) & OP_MASK_SHAMT); | |
| break; | |
| case 'c': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CODE) & OP_MASK_CODE); | |
| break; | |
| case 'q': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CODE2) & OP_MASK_CODE2); | |
| break; | |
| case 'C': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_COPZ) & OP_MASK_COPZ); | |
| break; | |
| case 'B': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CODE20) & OP_MASK_CODE20); | |
| break; | |
| case 'J': | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_CODE19) & OP_MASK_CODE19); | |
| break; | |
| case 'S': | |
| case 'V': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_fpr_names[(l >> OP_SH_FS) & OP_MASK_FS]); | |
| break; | |
| case 'T': | |
| case 'W': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_fpr_names[(l >> OP_SH_FT) & OP_MASK_FT]); | |
| break; | |
| case 'D': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_fpr_names[(l >> OP_SH_FD) & OP_MASK_FD]); | |
| break; | |
| case 'R': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_fpr_names[(l >> OP_SH_FR) & OP_MASK_FR]); | |
| break; | |
| case 'E': | |
| /* Coprocessor register for lwcN instructions, et al. | |
| Note that there is no load/store cp0 instructions, and | |
| that FPU (cp1) instructions disassemble this field using | |
| 'T' format. Therefore, until we gain understanding of | |
| cp2 register names, we can simply print the register | |
| numbers. */ | |
| (*info->fprintf_func) (info->stream, "$%ld", | |
| (l >> OP_SH_RT) & OP_MASK_RT); | |
| break; | |
| case 'G': | |
| /* Coprocessor register for mtcN instructions, et al. Note | |
| that FPU (cp1) instructions disassemble this field using | |
| 'S' format. Therefore, we only need to worry about cp0, | |
| cp2, and cp3. */ | |
| op = (l >> OP_SH_OP) & OP_MASK_OP; | |
| if (op == OP_OP_COP0) | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_cp0_names[(l >> OP_SH_RD) & OP_MASK_RD]); | |
| else | |
| (*info->fprintf_func) (info->stream, "$%ld", | |
| (l >> OP_SH_RD) & OP_MASK_RD); | |
| break; | |
| case 'K': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_hwr_names[(l >> OP_SH_RD) & OP_MASK_RD]); | |
| break; | |
| case 'N': | |
| (*info->fprintf_func) (info->stream, | |
| ((opp->pinfo & (FP_D | FP_S)) != 0 | |
| ? "$fcc%ld" : "$cc%ld"), | |
| (l >> OP_SH_BCC) & OP_MASK_BCC); | |
| break; | |
| case 'M': | |
| (*info->fprintf_func) (info->stream, "$fcc%ld", | |
| (l >> OP_SH_CCC) & OP_MASK_CCC); | |
| break; | |
| case 'P': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_PERFREG) & OP_MASK_PERFREG); | |
| break; | |
| case 'e': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_VECBYTE) & OP_MASK_VECBYTE); | |
| break; | |
| case '%': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_VECALIGN) & OP_MASK_VECALIGN); | |
| break; | |
| case 'H': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_SEL) & OP_MASK_SEL); | |
| break; | |
| case 'O': | |
| (*info->fprintf_func) (info->stream, "%ld", | |
| (l >> OP_SH_ALN) & OP_MASK_ALN); | |
| break; | |
| case 'Q': | |
| { | |
| unsigned int vsel = (l >> OP_SH_VSEL) & OP_MASK_VSEL; | |
| if ((vsel & 0x10) == 0) | |
| { | |
| int fmt; | |
| vsel &= 0x0f; | |
| for (fmt = 0; fmt < 3; fmt++, vsel >>= 1) | |
| if ((vsel & 1) == 0) | |
| break; | |
| (*info->fprintf_func) (info->stream, "$v%ld[%d]", | |
| (l >> OP_SH_FT) & OP_MASK_FT, | |
| vsel >> 1); | |
| } | |
| else if ((vsel & 0x08) == 0) | |
| { | |
| (*info->fprintf_func) (info->stream, "$v%ld", | |
| (l >> OP_SH_FT) & OP_MASK_FT); | |
| } | |
| else | |
| { | |
| (*info->fprintf_func) (info->stream, "0x%lx", | |
| (l >> OP_SH_FT) & OP_MASK_FT); | |
| } | |
| } | |
| break; | |
| case 'X': | |
| (*info->fprintf_func) (info->stream, "$v%ld", | |
| (l >> OP_SH_FD) & OP_MASK_FD); | |
| break; | |
| case 'Y': | |
| (*info->fprintf_func) (info->stream, "$v%ld", | |
| (l >> OP_SH_FS) & OP_MASK_FS); | |
| break; | |
| case 'Z': | |
| (*info->fprintf_func) (info->stream, "$v%ld", | |
| (l >> OP_SH_FT) & OP_MASK_FT); | |
| break; | |
| default: | |
| /* xgettext:c-format */ | |
| (*info->fprintf_func) (info->stream, | |
| _("# internal error, undefined modifier (%c)"), | |
| *d); | |
| return; | |
| } | |
| } | |
| } | |
| /* Print the mips instruction at address MEMADDR in debugged memory, | |
| on using INFO. Returns length of the instruction, in bytes, which is | |
| always INSNLEN. BIGENDIAN must be 1 if this is big-endian code, 0 if | |
| this is little-endian code. */ | |
| static int | |
| print_insn_mips (bfd_vma memaddr, | |
| unsigned long int word, | |
| struct disassemble_info *info) | |
| { | |
| const struct mips_opcode *op; | |
| static bfd_boolean init = 0; | |
| static const struct mips_opcode *mips_hash[OP_MASK_OP + 1]; | |
| /* Build a hash table to shorten the search time. */ | |
| if (! init) | |
| { | |
| unsigned int i; | |
| for (i = 0; i <= OP_MASK_OP; i++) | |
| { | |
| for (op = mips_opcodes; op < &mips_opcodes[NUMOPCODES]; op++) | |
| { | |
| if (op->pinfo == INSN_MACRO | |
| || (no_aliases && (op->pinfo2 & INSN2_ALIAS))) | |
| continue; | |
| if (i == ((op->match >> OP_SH_OP) & OP_MASK_OP)) | |
| { | |
| mips_hash[i] = op; | |
| break; | |
| } | |
| } | |
| } | |
| init = 1; | |
| } | |
| info->bytes_per_chunk = INSNLEN; | |
| info->display_endian = info->endian; | |
| info->insn_info_valid = 1; | |
| info->branch_delay_insns = 0; | |
| info->data_size = 0; | |
| info->insn_type = dis_nonbranch; | |
| info->target = 0; | |
| info->target2 = 0; | |
| op = mips_hash[(word >> OP_SH_OP) & OP_MASK_OP]; | |
| if (op != NULL) | |
| { | |
| for (; op < &mips_opcodes[NUMOPCODES]; op++) | |
| { | |
| if (op->pinfo != INSN_MACRO | |
| && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) | |
| && (word & op->mask) == op->match) | |
| { | |
| const char *d; | |
| /* We always allow to disassemble the jalx instruction. */ | |
| if (! OPCODE_IS_MEMBER (op, mips_isa, mips_processor) | |
| && strcmp (op->name, "jalx")) | |
| continue; | |
| /* Figure out instruction type and branch delay information. */ | |
| if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) | |
| { | |
| if ((info->insn_type & INSN_WRITE_GPR_31) != 0) | |
| info->insn_type = dis_jsr; | |
| else | |
| info->insn_type = dis_branch; | |
| info->branch_delay_insns = 1; | |
| } | |
| else if ((op->pinfo & (INSN_COND_BRANCH_DELAY | |
| | INSN_COND_BRANCH_LIKELY)) != 0) | |
| { | |
| if ((info->insn_type & INSN_WRITE_GPR_31) != 0) | |
| info->insn_type = dis_condjsr; | |
| else | |
| info->insn_type = dis_condbranch; | |
| info->branch_delay_insns = 1; | |
| } | |
| else if ((op->pinfo & (INSN_STORE_MEMORY | |
| | INSN_LOAD_MEMORY_DELAY)) != 0) | |
| info->insn_type = dis_dref; | |
| (*info->fprintf_func) (info->stream, "%s", op->name); | |
| d = op->args; | |
| if (d != NULL && *d != '\0') | |
| { | |
| (*info->fprintf_func) (info->stream, "\t"); | |
| print_insn_args (d, word, memaddr, info, op); | |
| } | |
| return INSNLEN; | |
| } | |
| } | |
| } | |
| /* Handle undefined instructions. */ | |
| info->insn_type = dis_noninsn; | |
| (*info->fprintf_func) (info->stream, "0x%lx", word); | |
| return INSNLEN; | |
| } | |
| /* Disassemble an operand for a mips16 instruction. */ | |
| static void | |
| print_mips16_insn_arg (char type, | |
| const struct mips_opcode *op, | |
| int l, | |
| bfd_boolean use_extend, | |
| int extend, | |
| bfd_vma memaddr, | |
| struct disassemble_info *info) | |
| { | |
| switch (type) | |
| { | |
| case ',': | |
| case '(': | |
| case ')': | |
| (*info->fprintf_func) (info->stream, "%c", type); | |
| break; | |
| case 'y': | |
| case 'w': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips16_reg_names(((l >> MIPS16OP_SH_RY) | |
| & MIPS16OP_MASK_RY))); | |
| break; | |
| case 'x': | |
| case 'v': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips16_reg_names(((l >> MIPS16OP_SH_RX) | |
| & MIPS16OP_MASK_RX))); | |
| break; | |
| case 'z': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips16_reg_names(((l >> MIPS16OP_SH_RZ) | |
| & MIPS16OP_MASK_RZ))); | |
| break; | |
| case 'Z': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips16_reg_names(((l >> MIPS16OP_SH_MOVE32Z) | |
| & MIPS16OP_MASK_MOVE32Z))); | |
| break; | |
| case '0': | |
| (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[0]); | |
| break; | |
| case 'S': | |
| (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[29]); | |
| break; | |
| case 'P': | |
| (*info->fprintf_func) (info->stream, "$pc"); | |
| break; | |
| case 'R': | |
| (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[31]); | |
| break; | |
| case 'X': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[((l >> MIPS16OP_SH_REGR32) | |
| & MIPS16OP_MASK_REGR32)]); | |
| break; | |
| case 'Y': | |
| (*info->fprintf_func) (info->stream, "%s", | |
| mips_gpr_names[MIPS16OP_EXTRACT_REG32R (l)]); | |
| break; | |
| case '<': | |
| case '>': | |
| case '[': | |
| case ']': | |
| case '4': | |
| case '5': | |
| case 'H': | |
| case 'W': | |
| case 'D': | |
| case 'j': | |
| case '6': | |
| case '8': | |
| case 'V': | |
| case 'C': | |
| case 'U': | |
| case 'k': | |
| case 'K': | |
| case 'p': | |
| case 'q': | |
| case 'A': | |
| case 'B': | |
| case 'E': | |
| { | |
| int immed, nbits, shift, signedp, extbits, pcrel, extu, branch; | |
| shift = 0; | |
| signedp = 0; | |
| extbits = 16; | |
| pcrel = 0; | |
| extu = 0; | |
| branch = 0; | |
| switch (type) | |
| { | |
| case '<': | |
| nbits = 3; | |
| immed = (l >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ; | |
| extbits = 5; | |
| extu = 1; | |
| break; | |
| case '>': | |
| nbits = 3; | |
| immed = (l >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX; | |
| extbits = 5; | |
| extu = 1; | |
| break; | |
| case '[': | |
| nbits = 3; | |
| immed = (l >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ; | |
| extbits = 6; | |
| extu = 1; | |
| break; | |
| case ']': | |
| nbits = 3; | |
| immed = (l >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX; | |
| extbits = 6; | |
| extu = 1; | |
| break; | |
| case '4': | |
| nbits = 4; | |
| immed = (l >> MIPS16OP_SH_IMM4) & MIPS16OP_MASK_IMM4; | |
| signedp = 1; | |
| extbits = 15; | |
| break; | |
| case '5': | |
| nbits = 5; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| info->insn_type = dis_dref; | |
| info->data_size = 1; | |
| break; | |
| case 'H': | |
| nbits = 5; | |
| shift = 1; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| info->insn_type = dis_dref; | |
| info->data_size = 2; | |
| break; | |
| case 'W': | |
| nbits = 5; | |
| shift = 2; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| if ((op->pinfo & MIPS16_INSN_READ_PC) == 0 | |
| && (op->pinfo & MIPS16_INSN_READ_SP) == 0) | |
| { | |
| info->insn_type = dis_dref; | |
| info->data_size = 4; | |
| } | |
| break; | |
| case 'D': | |
| nbits = 5; | |
| shift = 3; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| info->insn_type = dis_dref; | |
| info->data_size = 8; | |
| break; | |
| case 'j': | |
| nbits = 5; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| signedp = 1; | |
| break; | |
| case '6': | |
| nbits = 6; | |
| immed = (l >> MIPS16OP_SH_IMM6) & MIPS16OP_MASK_IMM6; | |
| break; | |
| case '8': | |
| nbits = 8; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| break; | |
| case 'V': | |
| nbits = 8; | |
| shift = 2; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| /* FIXME: This might be lw, or it might be addiu to $sp or | |
| $pc. We assume it's load. */ | |
| info->insn_type = dis_dref; | |
| info->data_size = 4; | |
| break; | |
| case 'C': | |
| nbits = 8; | |
| shift = 3; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| info->insn_type = dis_dref; | |
| info->data_size = 8; | |
| break; | |
| case 'U': | |
| nbits = 8; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| extu = 1; | |
| break; | |
| case 'k': | |
| nbits = 8; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| signedp = 1; | |
| break; | |
| case 'K': | |
| nbits = 8; | |
| shift = 3; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| signedp = 1; | |
| break; | |
| case 'p': | |
| nbits = 8; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| signedp = 1; | |
| pcrel = 1; | |
| branch = 1; | |
| info->insn_type = dis_condbranch; | |
| break; | |
| case 'q': | |
| nbits = 11; | |
| immed = (l >> MIPS16OP_SH_IMM11) & MIPS16OP_MASK_IMM11; | |
| signedp = 1; | |
| pcrel = 1; | |
| branch = 1; | |
| info->insn_type = dis_branch; | |
| break; | |
| case 'A': | |
| nbits = 8; | |
| shift = 2; | |
| immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8; | |
| pcrel = 1; | |
| /* FIXME: This can be lw or la. We assume it is lw. */ | |
| info->insn_type = dis_dref; | |
| info->data_size = 4; | |
| break; | |
| case 'B': | |
| nbits = 5; | |
| shift = 3; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| pcrel = 1; | |
| info->insn_type = dis_dref; | |
| info->data_size = 8; | |
| break; | |
| case 'E': | |
| nbits = 5; | |
| shift = 2; | |
| immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5; | |
| pcrel = 1; | |
| break; | |
| default: | |
| abort (); | |
| } | |
| if (! use_extend) | |
| { | |
| if (signedp && immed >= (1 << (nbits - 1))) | |
| immed -= 1 << nbits; | |
| immed <<= shift; | |
| if ((type == '<' || type == '>' || type == '[' || type == ']') | |
| && immed == 0) | |
| immed = 8; | |
| } | |
| else | |
| { | |
| if (extbits == 16) | |
| immed |= ((extend & 0x1f) << 11) | (extend & 0x7e0); | |
| else if (extbits == 15) | |
| immed |= ((extend & 0xf) << 11) | (extend & 0x7f0); | |
| else | |
| immed = ((extend >> 6) & 0x1f) | (extend & 0x20); | |
| immed &= (1 << extbits) - 1; | |
| if (! extu && immed >= (1 << (extbits - 1))) | |
| immed -= 1 << extbits; | |
| } | |
| if (! pcrel) | |
| (*info->fprintf_func) (info->stream, "%d", immed); | |
| else | |
| { | |
| bfd_vma baseaddr; | |
| if (branch) | |
| { | |
| immed *= 2; | |
| baseaddr = memaddr + 2; | |
| } | |
| else if (use_extend) | |
| baseaddr = memaddr - 2; | |
| else | |
| { | |
| int status; | |
| bfd_byte buffer[2]; | |
| baseaddr = memaddr; | |
| /* If this instruction is in the delay slot of a jr | |
| instruction, the base address is the address of the | |
| jr instruction. If it is in the delay slot of jalr | |
| instruction, the base address is the address of the | |
| jalr instruction. This test is unreliable: we have | |
| no way of knowing whether the previous word is | |
| instruction or data. */ | |
| status = (*info->read_memory_func) (memaddr - 4, buffer, 2, | |
| info); | |
| if (status == 0 | |
| && (((info->endian == BFD_ENDIAN_BIG | |
| ? bfd_getb16 (buffer) | |
| : bfd_getl16 (buffer)) | |
| & 0xf800) == 0x1800)) | |
| baseaddr = memaddr - 4; | |
| else | |
| { | |
| status = (*info->read_memory_func) (memaddr - 2, buffer, | |
| 2, info); | |
| if (status == 0 | |
| && (((info->endian == BFD_ENDIAN_BIG | |
| ? bfd_getb16 (buffer) | |
| : bfd_getl16 (buffer)) | |
| & 0xf81f) == 0xe800)) | |
| baseaddr = memaddr - 2; | |
| } | |
| } | |
| info->target = (baseaddr & ~((1 << shift) - 1)) + immed; | |
| if (pcrel && branch | |
| && info->flavour == bfd_target_unknown_flavour) | |
| /* For gdb disassembler, maintain odd address. */ | |
| info->target |= 1; | |
| (*info->print_address_func) (info->target, info); | |
| } | |
| } | |
| break; | |
| case 'a': | |
| { | |
| int jalx = l & 0x400; | |
| if (! use_extend) | |
| extend = 0; | |
| l = ((l & 0x1f) << 23) | ((l & 0x3e0) << 13) | (extend << 2); | |
| if (!jalx && info->flavour == bfd_target_unknown_flavour) | |
| /* For gdb disassembler, maintain odd address. */ | |
| l |= 1; | |
| } | |
| info->target = ((memaddr + 4) & ~(bfd_vma) 0x0fffffff) | l; | |
| (*info->print_address_func) (info->target, info); | |
| info->insn_type = dis_jsr; | |
| info->branch_delay_insns = 1; | |
| break; | |
| case 'l': | |
| case 'L': | |
| { | |
| int need_comma, amask, smask; | |
| need_comma = 0; | |
| l = (l >> MIPS16OP_SH_IMM6) & MIPS16OP_MASK_IMM6; | |
| amask = (l >> 3) & 7; | |
| if (amask > 0 && amask < 5) | |
| { | |
| (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[4]); | |
| if (amask > 1) | |
| (*info->fprintf_func) (info->stream, "-%s", | |
| mips_gpr_names[amask + 3]); | |
| need_comma = 1; | |
| } | |
| smask = (l >> 1) & 3; | |
| if (smask == 3) | |
| { | |
| (*info->fprintf_func) (info->stream, "%s??", | |
| need_comma ? "," : ""); | |
| need_comma = 1; | |
| } | |
| else if (smask > 0) | |
| { | |
| (*info->fprintf_func) (info->stream, "%s%s", | |
| need_comma ? "," : "", | |
| mips_gpr_names[16]); | |
| if (smask > 1) | |
| (*info->fprintf_func) (info->stream, "-%s", | |
| mips_gpr_names[smask + 15]); | |
| need_comma = 1; | |
| } | |
| if (l & 1) | |
| { | |
| (*info->fprintf_func) (info->stream, "%s%s", | |
| need_comma ? "," : "", | |
| mips_gpr_names[31]); | |
| need_comma = 1; | |
| } | |
| if (amask == 5 || amask == 6) | |
| { | |
| (*info->fprintf_func) (info->stream, "%s$f0", | |
| need_comma ? "," : ""); | |
| if (amask == 6) | |
| (*info->fprintf_func) (info->stream, "-$f1"); | |
| } | |
| } | |
| break; | |
| case 'm': | |
| case 'M': | |
| /* MIPS16e save/restore. */ | |
| { | |
| int need_comma = 0; | |
| int amask, args, statics; | |
| int nsreg, smask; | |
| int framesz; | |
| int i, j; | |
| l = l & 0x7f; | |
| if (use_extend) | |
| l |= extend << 16; | |
| amask = (l >> 16) & 0xf; | |
| if (amask == MIPS16_ALL_ARGS) | |
| { | |
| args = 4; | |
| statics = 0; | |
| } | |
| else if (amask == MIPS16_ALL_STATICS) | |
| { | |
| args = 0; | |
| statics = 4; | |
| } | |
| else | |
| { | |
| args = amask >> 2; | |
| statics = amask & 3; | |
| } | |
| if (args > 0) { | |
| (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[4]); | |
| if (args > 1) | |
| (*info->fprintf_func) (info->stream, "-%s", | |
| mips_gpr_names[4 + args - 1]); | |
| need_comma = 1; | |
| } | |
| framesz = (((l >> 16) & 0xf0) | (l & 0x0f)) * 8; | |
| if (framesz == 0 && !use_extend) | |
| framesz = 128; | |
| (*info->fprintf_func) (info->stream, "%s%d", | |
| need_comma ? "," : "", | |
| framesz); | |
| if (l & 0x40) /* $ra */ | |
| (*info->fprintf_func) (info->stream, ",%s", mips_gpr_names[31]); | |
| nsreg = (l >> 24) & 0x7; | |
| smask = 0; | |
| if (l & 0x20) /* $s0 */ | |
| smask |= 1 << 0; | |
| if (l & 0x10) /* $s1 */ | |
| smask |= 1 << 1; | |
| if (nsreg > 0) /* $s2-$s8 */ | |
| smask |= ((1 << nsreg) - 1) << 2; | |
| /* Find first set static reg bit. */ | |
| for (i = 0; i < 9; i++) | |
| { | |
| if (smask & (1 << i)) | |
| { | |
| (*info->fprintf_func) (info->stream, ",%s", | |
| mips_gpr_names[i == 8 ? 30 : (16 + i)]); | |
| /* Skip over string of set bits. */ | |
| for (j = i; smask & (2 << j); j++) | |
| continue; | |
| if (j > i) | |
| (*info->fprintf_func) (info->stream, "-%s", | |
| mips_gpr_names[j == 8 ? 30 : (16 + j)]); | |
| i = j + 1; | |
| } | |
| } | |
| /* Statics $ax - $a3. */ | |
| if (statics == 1) | |
| (*info->fprintf_func) (info->stream, ",%s", mips_gpr_names[7]); | |
| else if (statics > 0) | |
| (*info->fprintf_func) (info->stream, ",%s-%s", | |
| mips_gpr_names[7 - statics + 1], | |
| mips_gpr_names[7]); | |
| } | |
| break; | |
| default: | |
| /* xgettext:c-format */ | |
| (*info->fprintf_func) | |
| (info->stream, | |
| _("# internal disassembler error, unrecognised modifier (%c)"), | |
| type); | |
| abort (); | |
| } | |
| } | |
| /* Disassemble mips16 instructions. */ | |
| static int | |
| print_insn_mips16 (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| int status; | |
| bfd_byte buffer[2]; | |
| int length; | |
| int insn; | |
| bfd_boolean use_extend; | |
| int extend = 0; | |
| const struct mips_opcode *op, *opend; | |
| info->bytes_per_chunk = 2; | |
| info->display_endian = info->endian; | |
| info->insn_info_valid = 1; | |
| info->branch_delay_insns = 0; | |
| info->data_size = 0; | |
| info->insn_type = dis_nonbranch; | |
| info->target = 0; | |
| info->target2 = 0; | |
| status = (*info->read_memory_func) (memaddr, buffer, 2, info); | |
| if (status != 0) | |
| { | |
| (*info->memory_error_func) (status, memaddr, info); | |
| return -1; | |
| } | |
| length = 2; | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| insn = bfd_getb16 (buffer); | |
| else | |
| insn = bfd_getl16 (buffer); | |
| /* Handle the extend opcode specially. */ | |
| use_extend = FALSE; | |
| if ((insn & 0xf800) == 0xf000) | |
| { | |
| use_extend = TRUE; | |
| extend = insn & 0x7ff; | |
| memaddr += 2; | |
| status = (*info->read_memory_func) (memaddr, buffer, 2, info); | |
| if (status != 0) | |
| { | |
| (*info->fprintf_func) (info->stream, "extend 0x%x", | |
| (unsigned int) extend); | |
| (*info->memory_error_func) (status, memaddr, info); | |
| return -1; | |
| } | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| insn = bfd_getb16 (buffer); | |
| else | |
| insn = bfd_getl16 (buffer); | |
| /* Check for an extend opcode followed by an extend opcode. */ | |
| if ((insn & 0xf800) == 0xf000) | |
| { | |
| (*info->fprintf_func) (info->stream, "extend 0x%x", | |
| (unsigned int) extend); | |
| info->insn_type = dis_noninsn; | |
| return length; | |
| } | |
| length += 2; | |
| } | |
| /* FIXME: Should probably use a hash table on the major opcode here. */ | |
| opend = mips16_opcodes + bfd_mips16_num_opcodes; | |
| for (op = mips16_opcodes; op < opend; op++) | |
| { | |
| if (op->pinfo != INSN_MACRO | |
| && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) | |
| && (insn & op->mask) == op->match) | |
| { | |
| const char *s; | |
| if (strchr (op->args, 'a') != NULL) | |
| { | |
| if (use_extend) | |
| { | |
| (*info->fprintf_func) (info->stream, "extend 0x%x", | |
| (unsigned int) extend); | |
| info->insn_type = dis_noninsn; | |
| return length - 2; | |
| } | |
| use_extend = FALSE; | |
| memaddr += 2; | |
| status = (*info->read_memory_func) (memaddr, buffer, 2, | |
| info); | |
| if (status == 0) | |
| { | |
| use_extend = TRUE; | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| extend = bfd_getb16 (buffer); | |
| else | |
| extend = bfd_getl16 (buffer); | |
| length += 2; | |
| } | |
| } | |
| (*info->fprintf_func) (info->stream, "%s", op->name); | |
| if (op->args[0] != '\0') | |
| (*info->fprintf_func) (info->stream, "\t"); | |
| for (s = op->args; *s != '\0'; s++) | |
| { | |
| if (*s == ',' | |
| && s[1] == 'w' | |
| && (((insn >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX) | |
| == ((insn >> MIPS16OP_SH_RY) & MIPS16OP_MASK_RY))) | |
| { | |
| /* Skip the register and the comma. */ | |
| ++s; | |
| continue; | |
| } | |
| if (*s == ',' | |
| && s[1] == 'v' | |
| && (((insn >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ) | |
| == ((insn >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX))) | |
| { | |
| /* Skip the register and the comma. */ | |
| ++s; | |
| continue; | |
| } | |
| print_mips16_insn_arg (*s, op, insn, use_extend, extend, memaddr, | |
| info); | |
| } | |
| if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) | |
| { | |
| info->branch_delay_insns = 1; | |
| if (info->insn_type != dis_jsr) | |
| info->insn_type = dis_branch; | |
| } | |
| return length; | |
| } | |
| } | |
| if (use_extend) | |
| (*info->fprintf_func) (info->stream, "0x%x", extend | 0xf000); | |
| (*info->fprintf_func) (info->stream, "0x%x", insn); | |
| info->insn_type = dis_noninsn; | |
| return length; | |
| } | |
| /* In an environment where we do not know the symbol type of the | |
| instruction we are forced to assume that the low order bit of the | |
| instructions' address may mark it as a mips16 instruction. If we | |
| are single stepping, or the pc is within the disassembled function, | |
| this works. Otherwise, we need a clue. Sometimes. */ | |
| static int | |
| _print_insn_mips (bfd_vma memaddr, | |
| struct disassemble_info *info, | |
| enum bfd_endian endianness) | |
| { | |
| bfd_byte buffer[INSNLEN]; | |
| int status; | |
| set_default_mips_dis_options (info); | |
| parse_mips_dis_options (info->disassembler_options); | |
| #if 1 | |
| /* FIXME: If odd address, this is CLEARLY a mips 16 instruction. */ | |
| /* Only a few tools will work this way. */ | |
| if (memaddr & 0x01) | |
| return print_insn_mips16 (memaddr, info); | |
| #endif | |
| #if SYMTAB_AVAILABLE | |
| if (info->mach == bfd_mach_mips16 | |
| || (info->symbols != NULL | |
| && bfd_asymbol_flavour (*info->symbols) == bfd_target_elf_flavour | |
| && ELF_ST_IS_MIPS16 ((*(elf_symbol_type **) info->symbols) | |
| ->internal_elf_sym.st_other))) | |
| return print_insn_mips16 (memaddr, info); | |
| #endif | |
| status = (*info->read_memory_func) (memaddr, buffer, INSNLEN, info); | |
| if (status == 0) | |
| { | |
| unsigned long insn; | |
| if (endianness == BFD_ENDIAN_BIG) | |
| insn = (unsigned long) bfd_getb32 (buffer); | |
| else | |
| insn = (unsigned long) bfd_getl32 (buffer); | |
| return print_insn_mips (memaddr, insn, info); | |
| } | |
| else | |
| { | |
| (*info->memory_error_func) (status, memaddr, info); | |
| return -1; | |
| } | |
| } | |
| int | |
| print_insn_big_mips (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| return _print_insn_mips (memaddr, info, BFD_ENDIAN_BIG); | |
| } | |
| int | |
| print_insn_little_mips (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| return _print_insn_mips (memaddr, info, BFD_ENDIAN_LITTLE); | |
| } | |
| void | |
| print_mips_disassembler_options (FILE *stream) | |
| { | |
| unsigned int i; | |
| fprintf (stream, _("\n\ | |
| The following MIPS specific disassembler options are supported for use\n\ | |
| with the -M switch (multiple options should be separated by commas):\n")); | |
| fprintf (stream, _("\n\ | |
| gpr-names=ABI Print GPR names according to specified ABI.\n\ | |
| Default: based on binary being disassembled.\n")); | |
| fprintf (stream, _("\n\ | |
| fpr-names=ABI Print FPR names according to specified ABI.\n\ | |
| Default: numeric.\n")); | |
| fprintf (stream, _("\n\ | |
| cp0-names=ARCH Print CP0 register names according to\n\ | |
| specified architecture.\n\ | |
| Default: based on binary being disassembled.\n")); | |
| fprintf (stream, _("\n\ | |
| hwr-names=ARCH Print HWR names according to specified \n\ | |
| architecture.\n\ | |
| Default: based on binary being disassembled.\n")); | |
| fprintf (stream, _("\n\ | |
| reg-names=ABI Print GPR and FPR names according to\n\ | |
| specified ABI.\n")); | |
| fprintf (stream, _("\n\ | |
| reg-names=ARCH Print CP0 register and HWR names according to\n\ | |
| specified architecture.\n")); | |
| fprintf (stream, _("\n\ | |
| For the options above, the following values are supported for \"ABI\":\n\ | |
| ")); | |
| for (i = 0; i < ARRAY_SIZE (mips_abi_choices); i++) | |
| fprintf (stream, " %s", mips_abi_choices[i].name); | |
| fprintf (stream, _("\n")); | |
| fprintf (stream, _("\n\ | |
| For the options above, The following values are supported for \"ARCH\":\n\ | |
| ")); | |
| for (i = 0; i < ARRAY_SIZE (mips_arch_choices); i++) | |
| if (*mips_arch_choices[i].name != '\0') | |
| fprintf (stream, " %s", mips_arch_choices[i].name); | |
| fprintf (stream, _("\n")); | |
| fprintf (stream, _("\n")); | |
| } |