| # This file contains common code used by all simulators. | |
| # | |
| # common.m4 invokes AC macros used by all simulators and by the common | |
| # directory. It is intended to be included before any target specific | |
| # stuff. SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate | |
| # the Makefile. It is intended to be invoked last. | |
| # | |
| # The simulator's configure.in should look like: | |
| # | |
| # dnl Process this file with autoconf to produce a configure script. | |
| # AC_PREREQ(2.5)dnl | |
| # AC_INIT(Makefile.in) | |
| # AC_CONFIG_HEADER(config.h:config.in) | |
| # | |
| # sinclude(../common/aclocal.m4) | |
| # sinclude(../common/common.m4) | |
| # | |
| # ... target specific stuff ... | |
| AC_CANONICAL_SYSTEM | |
| AC_ARG_PROGRAM | |
| AC_PROG_CC | |
| AC_PROG_INSTALL | |
| # Put a plausible default for CC_FOR_BUILD in Makefile. | |
| if test "x$cross_compiling" = "xno"; then | |
| CC_FOR_BUILD='$(CC)' | |
| else | |
| CC_FOR_BUILD=gcc | |
| fi | |
| AC_SUBST(CC_FOR_BUILD) | |
| AC_SUBST(CFLAGS) | |
| AC_SUBST(HDEFINES) | |
| AR=${AR-ar} | |
| AC_SUBST(AR) | |
| AC_PROG_RANLIB | |
| dnl We don't use gettext, but bfd does. So we do the appropriate checks | |
| dnl to see if there are intl libraries we should link against. | |
| ALL_LINGUAS= | |
| ZW_GNU_GETTEXT_SISTER_DIR(../../intl) | |
| # Check for common headers. | |
| # FIXME: Seems to me this can cause problems for i386-windows hosts. | |
| # At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*. | |
| AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h) | |
| AC_CHECK_HEADERS(sys/time.h sys/resource.h) | |
| AC_CHECK_HEADERS(fcntl.h fpu_control.h) | |
| AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h) | |
| AC_CHECK_FUNCS(getrusage time sigaction __setfpucw) | |
| # Check for socket libraries | |
| AC_CHECK_LIB(socket, bind) | |
| AC_CHECK_LIB(nsl, gethostbyname) | |
| # BFD conditionally uses zlib, so we must link it in if libbfd does, by | |
| # using the same condition. | |
| AC_SEARCH_LIBS(zlibVersion, z, [AC_CHECK_HEADERS(zlib.h)]) | |
| . ${srcdir}/../../bfd/configure.host | |
| dnl Standard (and optional) simulator options. | |
| dnl Eventually all simulators will support these. | |
| dnl Do not add any here that cannot be supported by all simulators. | |
| dnl Do not add similar but different options to a particular simulator, | |
| dnl all shall eventually behave the same way. | |
| dnl We don't use automake, but we still want to support | |
| dnl --enable-maintainer-mode. | |
| USE_MAINTAINER_MODE=no | |
| AC_ARG_ENABLE(maintainer-mode, | |
| [ --enable-maintainer-mode Enable developer functionality.], | |
| [case "${enableval}" in | |
| yes) MAINT="" USE_MAINTAINER_MODE=yes ;; | |
| no) MAINT="#" ;; | |
| *) AC_MSG_ERROR("--enable-maintainer-mode does not take a value"); MAINT="#" ;; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$MAINT" = x""; then | |
| echo "Setting maintainer mode" 6>&1 | |
| fi],[MAINT="#"])dnl | |
| AC_SUBST(MAINT) | |
| dnl This is a generic option to enable special byte swapping | |
| dnl insns on *any* cpu. | |
| AC_ARG_ENABLE(sim-bswap, | |
| [ --enable-sim-bswap Use Host specific BSWAP instruction.], | |
| [case "${enableval}" in | |
| yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";; | |
| no) sim_bswap="-DWITH_BSWAP=0";; | |
| *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then | |
| echo "Setting bswap flags = $sim_bswap" 6>&1 | |
| fi],[sim_bswap=""])dnl | |
| AC_SUBST(sim_bswap) | |
| AC_ARG_ENABLE(sim-cflags, | |
| [ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator], | |
| [case "${enableval}" in | |
| yes) sim_cflags="-O2 -fomit-frame-pointer";; | |
| trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";; | |
| no) sim_cflags="";; | |
| *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then | |
| echo "Setting sim cflags = $sim_cflags" 6>&1 | |
| fi],[sim_cflags=""])dnl | |
| AC_SUBST(sim_cflags) | |
| dnl --enable-sim-debug is for developers of the simulator | |
| dnl the allowable values are work-in-progress | |
| AC_ARG_ENABLE(sim-debug, | |
| [ --enable-sim-debug=opts Enable debugging flags], | |
| [case "${enableval}" in | |
| yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";; | |
| no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";; | |
| *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then | |
| echo "Setting sim debug = $sim_debug" 6>&1 | |
| fi],[sim_debug=""])dnl | |
| AC_SUBST(sim_debug) | |
| dnl --enable-sim-stdio is for users of the simulator | |
| dnl It determines if IO from the program is routed through STDIO (buffered) | |
| AC_ARG_ENABLE(sim-stdio, | |
| [ --enable-sim-stdio Specify whether to use stdio for console input/output.], | |
| [case "${enableval}" in | |
| yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";; | |
| no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";; | |
| *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then | |
| echo "Setting stdio flags = $sim_stdio" 6>&1 | |
| fi],[sim_stdio=""])dnl | |
| AC_SUBST(sim_stdio) | |
| dnl --enable-sim-trace is for users of the simulator | |
| dnl The argument is either a bitmask of things to enable [exactly what is | |
| dnl up to the simulator], or is a comma separated list of names of tracing | |
| dnl elements to enable. The latter is only supported on simulators that | |
| dnl use WITH_TRACE. | |
| AC_ARG_ENABLE(sim-trace, | |
| [ --enable-sim-trace=opts Enable tracing flags], | |
| [case "${enableval}" in | |
| yes) sim_trace="-DTRACE=1 -DWITH_TRACE=-1";; | |
| no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";; | |
| [[-0-9]]*) | |
| sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";; | |
| [[a-z]]*) | |
| sim_trace="" | |
| for x in `echo "$enableval" | sed -e "s/,/ /g"`; do | |
| if test x"$sim_trace" = x; then | |
| sim_trace="-DWITH_TRACE='(TRACE_$x" | |
| else | |
| sim_trace="${sim_trace}|TRACE_$x" | |
| fi | |
| done | |
| sim_trace="$sim_trace)'" ;; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then | |
| echo "Setting sim trace = $sim_trace" 6>&1 | |
| fi],[sim_trace=""])dnl | |
| AC_SUBST(sim_trace) | |
| dnl --enable-sim-profile | |
| dnl The argument is either a bitmask of things to enable [exactly what is | |
| dnl up to the simulator], or is a comma separated list of names of profiling | |
| dnl elements to enable. The latter is only supported on simulators that | |
| dnl use WITH_PROFILE. | |
| AC_ARG_ENABLE(sim-profile, | |
| [ --enable-sim-profile=opts Enable profiling flags], | |
| [case "${enableval}" in | |
| yes) sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";; | |
| no) sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";; | |
| [[-0-9]]*) | |
| sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";; | |
| [[a-z]]*) | |
| sim_profile="" | |
| for x in `echo "$enableval" | sed -e "s/,/ /g"`; do | |
| if test x"$sim_profile" = x; then | |
| sim_profile="-DWITH_PROFILE='(PROFILE_$x" | |
| else | |
| sim_profile="${sim_profile}|PROFILE_$x" | |
| fi | |
| done | |
| sim_profile="$sim_profile)'" ;; | |
| esac | |
| if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then | |
| echo "Setting sim profile = $sim_profile" 6>&1 | |
| fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl | |
| AC_SUBST(sim_profile) | |
| ACX_PKGVERSION([GDB]) | |
| ACX_BUGURL([http://www.gnu.org/software/gdb/bugs/]) | |
| AC_DEFINE_UNQUOTED([PKGVERSION], ["$PKGVERSION"], [Additional package description]) | |
| AC_DEFINE_UNQUOTED([REPORT_BUGS_TO], ["$REPORT_BUGS_TO"], [Bug reporting address]) | |
| dnl Types used by common code | |
| AC_TYPE_SIGNAL | |
| dnl Detect exe extension | |
| AC_EXEEXT | |
| dnl These are available to append to as desired. | |
| sim_link_files= | |
| sim_link_links= | |
| dnl Create tconfig.h either from simulator's tconfig.in or default one | |
| dnl in common. | |
| sim_link_links=tconfig.h | |
| if test -f ${srcdir}/tconfig.in | |
| then | |
| sim_link_files=tconfig.in | |
| else | |
| sim_link_files=../common/tconfig.in | |
| fi | |
| # targ-vals.def points to the libc macro description file. | |
| case "${target}" in | |
| *-*-*) TARG_VALS_DEF=../common/nltvals.def ;; | |
| esac | |
| sim_link_files="${sim_link_files} ${TARG_VALS_DEF}" | |
| sim_link_links="${sim_link_links} targ-vals.def" |