| /* The common simulator framework for GDB, the GNU Debugger. | |
| Copyright 2002, 2007, 2008 Free Software Foundation, Inc. | |
| Contributed by Andrew Cagney and Red Hat. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "hw-main.h" | |
| #ifdef HAVE_STRING_H | |
| #include <string.h> | |
| #else | |
| #ifdef HAVE_STRINGS_H | |
| #include <strings.h> | |
| #endif | |
| #endif | |
| /* DEVICE | |
| glue - glue to interconnect and test hardware ports | |
| DESCRIPTION | |
| The glue device provides two functions. Firstly, it provides a | |
| mechanism for inspecting and driving the port network. Secondly, | |
| it provides a set of boolean primitives that can be used to apply | |
| combinatorial operations to the port network. | |
| Glue devices have a variable number of big endian <<output>> | |
| registers. Each register is target-word sized. The registers can | |
| be read and written. | |
| Writing to an output register results in an event being driven | |
| (level determined by the value written) on the devices | |
| corresponding output port. | |
| Reading an <<output>> register returns either the last value | |
| written or the most recently computed value (for that register) as | |
| a result of an event ariving on that port (which ever was computed | |
| last). | |
| At present the following sub device types are available: | |
| <<glue>>: In addition to driving its output interrupt port with any | |
| value written to an interrupt input port is stored in the | |
| corresponding <<output>> register. Such input interrupts, however, | |
| are not propogated to an output interrupt port. | |
| <<glue-and>>: The bit-wise AND of the interrupt inputs is computed | |
| and then both stored in <<output>> register zero and propogated to | |
| output interrupt output port zero. | |
| PROPERTIES | |
| reg = <address> <size> (required) | |
| Specify the address (within the parent bus) that this device is to | |
| live. The address must be 2048 * sizeof (word) (8k in a 32bit | |
| simulation) aligned. | |
| interrupt-ranges = <int-number> <range> (optional) | |
| If present, this specifies the number of valid interrupt inputs (up | |
| to the maximum of 2048). By default, <<int-number>> is zero and | |
| range is determined by the <<reg>> size. | |
| PORTS | |
| int[0..] (input, output) | |
| Both an input and an output port. | |
| EXAMPLES | |
| Enable tracing of the device: | |
| | -t glue-device \ | |
| Create source, bitwize-and, and sink glue devices. Since the | |
| device at address <<0x10000>> is of size <<8>> it will have two | |
| output interrupt ports. | |
| | -o '/iobus@0xf0000000/glue@0x10000/reg 0x10000 8' \ | |
| | -o '/iobus@0xf0000000/glue-and@0x20000/reg 0x20000 4' \ | |
| | -o '/iobus@0xf0000000/glue-and/interrupt-ranges 0 2' \ | |
| | -o '/iobus@0xf0000000/glue@0x30000/reg 0x30000 4' \ | |
| Wire the two source interrupts to the AND device: | |
| | -o '/iobus@0xf0000000/glue@0x10000 > 0 0 /iobus/glue-and' \ | |
| | -o '/iobus@0xf0000000/glue@0x10000 > 1 1 /iobus/glue-and' \ | |
| Wire the AND device up to the sink so that the and's output is not | |
| left open. | |
| | -o '/iobus@0xf0000000/glue-and > 0 0 /iobus/glue@0x30000' \ | |
| With the above configuration. The client program is able to | |
| compute a two bit AND. For instance the <<C>> stub below prints 1 | |
| AND 0. | |
| | unsigned *input = (void*)0xf0010000; | |
| | unsigned *output = (void*)0xf0030000; | |
| | unsigned ans; | |
| | input[0] = htonl(1); | |
| | input[1] = htonl(0); | |
| | ans = ntohl(*output); | |
| | write_string("AND is "); | |
| | write_int(ans); | |
| | write_line(); | |
| BUGS | |
| A future implementation of this device may support multiple | |
| interrupt ranges. | |
| Some of the devices listed may not yet be fully implemented. | |
| Additional devices such as a D flip-flop (DFF), an inverter (INV) | |
| or a latch (LAT) may prove useful. | |
| */ | |
| enum { | |
| max_nr_ports = 2048, | |
| }; | |
| enum hw_glue_type { | |
| glue_undefined = 0, | |
| glue_io, | |
| glue_and, | |
| glue_nand, | |
| glue_or, | |
| glue_xor, | |
| glue_nor, | |
| glue_not, | |
| }; | |
| struct hw_glue { | |
| enum hw_glue_type type; | |
| int int_number; | |
| int *input; | |
| int nr_inputs; | |
| unsigned sizeof_input; | |
| /* our output registers */ | |
| int space; | |
| unsigned_word address; | |
| unsigned sizeof_output; | |
| int *output; | |
| int nr_outputs; | |
| }; | |
| static hw_io_read_buffer_method hw_glue_io_read_buffer; | |
| static hw_io_write_buffer_method hw_glue_io_write_buffer; | |
| static hw_port_event_method hw_glue_port_event; | |
| const static struct hw_port_descriptor hw_glue_ports[]; | |
| static void | |
| hw_glue_finish (struct hw *me) | |
| { | |
| struct hw_glue *glue = HW_ZALLOC (me, struct hw_glue); | |
| /* establish our own methods */ | |
| set_hw_data (me, glue); | |
| set_hw_io_read_buffer (me, hw_glue_io_read_buffer); | |
| set_hw_io_write_buffer (me, hw_glue_io_write_buffer); | |
| set_hw_ports (me, hw_glue_ports); | |
| set_hw_port_event (me, hw_glue_port_event); | |
| /* attach to our parent bus */ | |
| do_hw_attach_regs (me); | |
| /* establish the output registers */ | |
| { | |
| reg_property_spec unit; | |
| int reg_nr; | |
| /* find a relevant reg entry */ | |
| reg_nr = 0; | |
| while (hw_find_reg_array_property (me, "reg", reg_nr, &unit) | |
| && !hw_unit_size_to_attach_size (hw_parent (me), | |
| &unit.size, | |
| &glue->sizeof_output, | |
| me)) | |
| reg_nr++; | |
| /* check out the size */ | |
| if (glue->sizeof_output == 0) | |
| hw_abort (me, "at least one reg property size must be nonzero"); | |
| if (glue->sizeof_output % sizeof (unsigned_word) != 0) | |
| hw_abort (me, "reg property size must be %ld aligned", | |
| (long) sizeof (unsigned_word)); | |
| /* and the address */ | |
| hw_unit_address_to_attach_address (hw_parent (me), | |
| &unit.address, | |
| &glue->space, | |
| &glue->address, | |
| me); | |
| if (glue->address % (sizeof (unsigned_word) * max_nr_ports) != 0) | |
| hw_abort (me, "reg property address must be %ld aligned", | |
| (long) (sizeof (unsigned_word) * max_nr_ports)); | |
| glue->nr_outputs = glue->sizeof_output / sizeof (unsigned_word); | |
| glue->output = hw_zalloc (me, glue->sizeof_output); | |
| } | |
| /* establish the input ports */ | |
| { | |
| const struct hw_property *ranges; | |
| ranges = hw_find_property (me, "interrupt-ranges"); | |
| if (ranges == NULL) | |
| { | |
| glue->int_number = 0; | |
| glue->nr_inputs = glue->nr_outputs; | |
| } | |
| else if (ranges->sizeof_array != sizeof (unsigned_cell) * 2) | |
| { | |
| hw_abort (me, "invalid interrupt-ranges property (incorrect size)"); | |
| } | |
| else | |
| { | |
| const unsigned_cell *int_range = ranges->array; | |
| glue->int_number = BE2H_cell (int_range[0]); | |
| glue->nr_inputs = BE2H_cell (int_range[1]); | |
| } | |
| glue->sizeof_input = glue->nr_inputs * sizeof (unsigned); | |
| glue->input = hw_zalloc (me, glue->sizeof_input); | |
| } | |
| /* determine our type */ | |
| { | |
| const char *name = hw_name(me); | |
| if (strcmp (name, "glue") == 0) | |
| glue->type = glue_io; | |
| else if (strcmp (name, "glue-and") == 0) | |
| glue->type = glue_and; | |
| else | |
| hw_abort (me, "unimplemented glue type"); | |
| } | |
| HW_TRACE ((me, "int-number %d, nr_inputs %d, nr_outputs %d", | |
| glue->int_number, glue->nr_inputs, glue->nr_outputs)); | |
| } | |
| static unsigned | |
| hw_glue_io_read_buffer (struct hw *me, | |
| void *dest, | |
| int space, | |
| unsigned_word addr, | |
| unsigned nr_bytes) | |
| { | |
| struct hw_glue *glue = (struct hw_glue *) hw_data (me); | |
| int reg = ((addr - glue->address) / sizeof (unsigned_word)) % glue->nr_outputs; | |
| if (nr_bytes != sizeof (unsigned_word) | |
| || (addr % sizeof (unsigned_word)) != 0) | |
| hw_abort (me, "missaligned read access (%d:0x%lx:%d) not supported", | |
| space, (unsigned long)addr, nr_bytes); | |
| *(unsigned_word*)dest = H2BE_4(glue->output[reg]); | |
| HW_TRACE ((me, "read - port %d (0x%lx), level %d", | |
| reg, (unsigned long) addr, glue->output[reg])); | |
| return nr_bytes; | |
| } | |
| static unsigned | |
| hw_glue_io_write_buffer (struct hw *me, | |
| const void *source, | |
| int space, | |
| unsigned_word addr, | |
| unsigned nr_bytes) | |
| { | |
| struct hw_glue *glue = (struct hw_glue *) hw_data (me); | |
| int reg = ((addr - glue->address) / sizeof (unsigned_word)) % max_nr_ports; | |
| if (nr_bytes != sizeof (unsigned_word) | |
| || (addr % sizeof (unsigned_word)) != 0) | |
| hw_abort (me, "missaligned write access (%d:0x%lx:%d) not supported", | |
| space, (unsigned long) addr, nr_bytes); | |
| glue->output[reg] = H2BE_4 (*(unsigned_word*)source); | |
| HW_TRACE ((me, "write - port %d (0x%lx), level %d", | |
| reg, (unsigned long) addr, glue->output[reg])); | |
| hw_port_event (me, reg, glue->output[reg]); | |
| return nr_bytes; | |
| } | |
| static void | |
| hw_glue_port_event (struct hw *me, | |
| int my_port, | |
| struct hw *source, | |
| int source_port, | |
| int level) | |
| { | |
| struct hw_glue *glue = (struct hw_glue *) hw_data (me); | |
| int i; | |
| if (my_port < glue->int_number | |
| || my_port >= glue->int_number + glue->nr_inputs) | |
| hw_abort (me, "port %d outside of valid range", my_port); | |
| glue->input[my_port - glue->int_number] = level; | |
| switch (glue->type) | |
| { | |
| case glue_io: | |
| { | |
| int port = my_port % glue->nr_outputs; | |
| glue->output[port] = level; | |
| HW_TRACE ((me, "input - port %d (0x%lx), level %d", | |
| my_port, | |
| (unsigned long) glue->address + port * sizeof (unsigned_word), | |
| level)); | |
| break; | |
| } | |
| case glue_and: | |
| { | |
| glue->output[0] = glue->input[0]; | |
| for (i = 1; i < glue->nr_inputs; i++) | |
| glue->output[0] &= glue->input[i]; | |
| HW_TRACE ((me, "and - port %d, level %d arrived - output %d", | |
| my_port, level, glue->output[0])); | |
| hw_port_event (me, 0, glue->output[0]); | |
| break; | |
| } | |
| default: | |
| { | |
| hw_abort (me, "operator not implemented"); | |
| break; | |
| } | |
| } | |
| } | |
| static const struct hw_port_descriptor hw_glue_ports[] = { | |
| { "int", 0, max_nr_ports }, | |
| { NULL } | |
| }; | |
| const struct hw_descriptor dv_glue_descriptor[] = { | |
| { "glue", hw_glue_finish, }, | |
| { "glue-and", hw_glue_finish, }, | |
| { "glue-nand", hw_glue_finish, }, | |
| { "glue-or", hw_glue_finish, }, | |
| { "glue-xor", hw_glue_finish, }, | |
| { "glue-nor", hw_glue_finish, }, | |
| { "glue-not", hw_glue_finish, }, | |
| { NULL }, | |
| }; |