| /* The common simulator framework for GDB, the GNU Debugger. | |
| Copyright 2002, 2004, 2007, 2008 Free Software Foundation, Inc. | |
| Contributed by Andrew Cagney and Red Hat. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #ifndef SIM_CONFIG_H | |
| #define SIM_CONFIG_H | |
| /* Host dependant: | |
| The CPP below defines information about the compilation host. In | |
| particular it defines the macro's: | |
| WITH_HOST_BYTE_ORDER The byte order of the host. Could | |
| be any of LITTLE_ENDIAN, BIG_ENDIAN | |
| or 0 (unknown). Those macro's also | |
| need to be defined. | |
| */ | |
| /* NetBSD: | |
| NetBSD is easy, everything you could ever want is in a header file | |
| (well almost :-) */ | |
| #if defined(__NetBSD__) | |
| # include <machine/endian.h> | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER BYTE_ORDER | |
| # endif | |
| # if (BYTE_ORDER != WITH_HOST_BYTE_ORDER) | |
| # error "host endian incorrectly configured, check config.h" | |
| # endif | |
| #endif | |
| /* Linux is similarly easy. */ | |
| #if defined(__linux__) | |
| # include <endian.h> | |
| # if defined(__LITTLE_ENDIAN) && !defined(LITTLE_ENDIAN) | |
| # define LITTLE_ENDIAN __LITTLE_ENDIAN | |
| # endif | |
| # if defined(__BIG_ENDIAN) && !defined(BIG_ENDIAN) | |
| # define BIG_ENDIAN __BIG_ENDIAN | |
| # endif | |
| # if defined(__BYTE_ORDER) && !defined(BYTE_ORDER) | |
| # define BYTE_ORDER __BYTE_ORDER | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER BYTE_ORDER | |
| # endif | |
| # if (BYTE_ORDER != WITH_HOST_BYTE_ORDER) | |
| # error "host endian incorrectly configured, check config.h" | |
| # endif | |
| #endif | |
| /* INSERT HERE - hosts that have available LITTLE_ENDIAN and | |
| BIG_ENDIAN macro's */ | |
| /* Some hosts don't define LITTLE_ENDIAN or BIG_ENDIAN, help them out */ | |
| #ifndef LITTLE_ENDIAN | |
| #define LITTLE_ENDIAN 1234 | |
| #endif | |
| #ifndef BIG_ENDIAN | |
| #define BIG_ENDIAN 4321 | |
| #endif | |
| /* SunOS on SPARC: | |
| Big endian last time I looked */ | |
| #if defined(sparc) || defined(__sparc__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER BIG_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) | |
| # error "sun was big endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* Random x86 | |
| Little endian last time I looked */ | |
| #if defined(i386) || defined(i486) || defined(i586) || defined (i686) || defined(__i386__) || defined(__i486__) || defined(__i586__) || defined (__i686__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) | |
| # error "x86 was little endian last time I looked ..." | |
| # endif | |
| #endif | |
| #if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP | |
| #undef htonl | |
| #undef ntohl | |
| #define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) | |
| #define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; }) | |
| #endif | |
| /* Power or PowerPC running AIX */ | |
| #if defined(_POWER) && defined(_AIX) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER BIG_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) | |
| # error "Power/PowerPC AIX was big endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* Solaris running PowerPC */ | |
| #if defined(__PPC) && defined(__sun__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) | |
| # error "Solaris on PowerPCs was little endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* HP/PA */ | |
| #if defined(__hppa__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER BIG_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) | |
| # error "HP/PA was big endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* Big endian MIPS */ | |
| #if defined(__MIPSEB__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER BIG_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != BIG_ENDIAN) | |
| # error "MIPSEB was big endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* Little endian MIPS */ | |
| #if defined(__MIPSEL__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) | |
| # error "MIPSEL was little endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* Windows NT */ | |
| #if defined(__WIN32__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) | |
| # error "Windows NT was little endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* Alpha running DEC unix */ | |
| #if defined(__osf__) && defined(__alpha__) | |
| # if (WITH_HOST_BYTE_ORDER == 0) | |
| # undef WITH_HOST_BYTE_ORDER | |
| # define WITH_HOST_BYTE_ORDER LITTLE_ENDIAN | |
| # endif | |
| # if (WITH_HOST_BYTE_ORDER != LITTLE_ENDIAN) | |
| # error "AXP running DEC unix was little endian last time I looked ..." | |
| # endif | |
| #endif | |
| /* INSERT HERE - additional hosts that do not have LITTLE_ENDIAN and | |
| BIG_ENDIAN definitions available. */ | |
| /* Until devices and tree properties are sorted out, tell sim-config.c | |
| not to call the tree_find_foo fns. */ | |
| #define WITH_TREE_PROPERTIES 0 | |
| /* endianness of the host/target: | |
| If the build process is aware (at compile time) of the endianness | |
| of the host/target it is able to eliminate slower generic endian | |
| handling code. | |
| Possible values are 0 (unknown), LITTLE_ENDIAN, BIG_ENDIAN */ | |
| #ifndef WITH_HOST_BYTE_ORDER | |
| #define WITH_HOST_BYTE_ORDER 0 /*unknown*/ | |
| #endif | |
| #ifndef WITH_TARGET_BYTE_ORDER | |
| #define WITH_TARGET_BYTE_ORDER 0 /*unknown*/ | |
| #endif | |
| #ifndef WITH_DEFAULT_TARGET_BYTE_ORDER | |
| #define WITH_DEFAULT_TARGET_BYTE_ORDER 0 /* fatal */ | |
| #endif | |
| extern int current_host_byte_order; | |
| #define CURRENT_HOST_BYTE_ORDER (WITH_HOST_BYTE_ORDER \ | |
| ? WITH_HOST_BYTE_ORDER \ | |
| : current_host_byte_order) | |
| extern int current_target_byte_order; | |
| #define CURRENT_TARGET_BYTE_ORDER (WITH_TARGET_BYTE_ORDER \ | |
| ? WITH_TARGET_BYTE_ORDER \ | |
| : current_target_byte_order) | |
| /* XOR endian. | |
| In addition to the above, the simulator can support the horrible | |
| XOR endian mode (as found in the PowerPC and MIPS ISA). See | |
| sim-core for more information. | |
| If WITH_XOR_ENDIAN is non-zero, it specifies the number of bytes | |
| potentially involved in the XOR munge. A typical value is 8. */ | |
| #ifndef WITH_XOR_ENDIAN | |
| #define WITH_XOR_ENDIAN 0 | |
| #endif | |
| /* Intel host BSWAP support: | |
| Whether to use bswap on the 486 and pentiums rather than the 386 | |
| sequence that uses xchgb/rorl/xchgb */ | |
| #ifndef WITH_BSWAP | |
| #define WITH_BSWAP 0 | |
| #endif | |
| /* SMP support: | |
| Sets a limit on the number of processors that can be simulated. If | |
| WITH_SMP is set to zero (0), the simulator is restricted to | |
| suporting only one processor (and as a consequence leaves the SMP | |
| code out of the build process). | |
| The actual number of processors is taken from the device | |
| /options/smp@<nr-cpu> */ | |
| #if defined (WITH_SMP) && (WITH_SMP > 0) | |
| #define MAX_NR_PROCESSORS WITH_SMP | |
| #endif | |
| #ifndef MAX_NR_PROCESSORS | |
| #define MAX_NR_PROCESSORS 1 | |
| #endif | |
| /* Size of target word, address and OpenFirmware Cell: | |
| The target word size is determined by the natural size of its | |
| reginsters. | |
| On most hosts, the address and cell are the same size as a target | |
| word. */ | |
| #ifndef WITH_TARGET_WORD_BITSIZE | |
| #define WITH_TARGET_WORD_BITSIZE 32 | |
| #endif | |
| #ifndef WITH_TARGET_ADDRESS_BITSIZE | |
| #define WITH_TARGET_ADDRESS_BITSIZE WITH_TARGET_WORD_BITSIZE | |
| #endif | |
| #ifndef WITH_TARGET_CELL_BITSIZE | |
| #define WITH_TARGET_CELL_BITSIZE WITH_TARGET_WORD_BITSIZE | |
| #endif | |
| #ifndef WITH_TARGET_FLOATING_POINT_BITSIZE | |
| #define WITH_TARGET_FLOATING_POINT_BITSIZE 64 | |
| #endif | |
| /* Most significant bit of target: | |
| Set this according to your target's bit numbering convention. For | |
| the PowerPC it is zero, for many other targets it is 31 or 63. | |
| For targets that can both have either 32 or 64 bit words and number | |
| MSB as 31, 63. Define this to be (WITH_TARGET_WORD_BITSIZE - 1) */ | |
| #ifndef WITH_TARGET_WORD_MSB | |
| #define WITH_TARGET_WORD_MSB 0 | |
| #endif | |
| /* Program environment: | |
| Three environments are available - UEA (user), VEA (virtual) and | |
| OEA (perating). The former two are environment that users would | |
| expect to see (VEA includes things like coherency and the time | |
| base) while OEA is what an operating system expects to see. By | |
| setting these to specific values, the build process is able to | |
| eliminate non relevent environment code. | |
| STATE_ENVIRONMENT(sd) specifies which of vea or oea is required for | |
| the current runtime. | |
| ALL_ENVIRONMENT is used during configuration as a value for | |
| WITH_ENVIRONMENT to indicate the choice is runtime selectable. | |
| The default is then USER_ENVIRONMENT [since allowing the user to choose | |
| the default at configure time seems like featuritis and since people using | |
| OPERATING_ENVIRONMENT have more to worry about than selecting the | |
| default]. | |
| ALL_ENVIRONMENT is also used to set STATE_ENVIRONMENT to the | |
| "uninitialized" state. */ | |
| enum sim_environment { | |
| ALL_ENVIRONMENT, | |
| USER_ENVIRONMENT, | |
| VIRTUAL_ENVIRONMENT, | |
| OPERATING_ENVIRONMENT | |
| }; | |
| /* If the simulator specified SIM_AC_OPTION_ENVIRONMENT, indicate so. */ | |
| #ifdef WITH_ENVIRONMENT | |
| #define SIM_HAVE_ENVIRONMENT | |
| #endif | |
| /* If the simulator doesn't specify SIM_AC_OPTION_ENVIRONMENT in its | |
| configure.in, the only supported environment is the user environment. */ | |
| #ifndef WITH_ENVIRONMENT | |
| #define WITH_ENVIRONMENT USER_ENVIRONMENT | |
| #endif | |
| #define DEFAULT_ENVIRONMENT (WITH_ENVIRONMENT != ALL_ENVIRONMENT \ | |
| ? WITH_ENVIRONMENT \ | |
| : USER_ENVIRONMENT) | |
| /* To be prepended to simulator calls with absolute file paths and | |
| chdir:ed at startup. */ | |
| extern char *simulator_sysroot; | |
| /* Callback & Modulo Memory. | |
| Core includes a builtin memory type (raw_memory) that is | |
| implemented using an array. raw_memory does not require any | |
| additional functions etc. | |
| Callback memory is where the core calls a core device for the data | |
| it requires. Callback memory can be layered using priorities. | |
| Modulo memory is a variation on raw_memory where ADDRESS & (MODULO | |
| - 1) is used as the index into the memory array. | |
| The OEA model uses callback memory for devices. | |
| The VEA model uses callback memory to capture `page faults'. | |
| BTW, while raw_memory could have been implemented as a callback, | |
| profiling has shown that there is a biger win (at least for the | |
| x86) in eliminating a function call for the most common | |
| (raw_memory) case. */ | |
| #ifndef WITH_CALLBACK_MEMORY | |
| #define WITH_CALLBACK_MEMORY 1 | |
| #endif | |
| #ifndef WITH_MODULO_MEMORY | |
| #define WITH_MODULO_MEMORY 0 | |
| #endif | |
| /* Alignment: | |
| A processor architecture may or may not handle miss aligned | |
| transfers. | |
| As alternatives: both little and big endian modes take an exception | |
| (STRICT_ALIGNMENT); big and little endian models handle mis aligned | |
| transfers (NONSTRICT_ALIGNMENT); or the address is forced into | |
| alignment using a mask (FORCED_ALIGNMENT). | |
| Mixed alignment should be specified when the simulator needs to be | |
| able to change the alignment requirements on the fly (eg for | |
| bi-endian support). */ | |
| enum sim_alignments { | |
| MIXED_ALIGNMENT, | |
| NONSTRICT_ALIGNMENT, | |
| STRICT_ALIGNMENT, | |
| FORCED_ALIGNMENT, | |
| }; | |
| extern enum sim_alignments current_alignment; | |
| #if !defined (WITH_ALIGNMENT) | |
| #define WITH_ALIGNMENT 0 | |
| #endif | |
| #if !defined (WITH_DEFAULT_ALIGNMENT) | |
| #define WITH_DEFAULT_ALIGNMENT 0 /* fatal */ | |
| #endif | |
| #define CURRENT_ALIGNMENT (WITH_ALIGNMENT \ | |
| ? WITH_ALIGNMENT \ | |
| : current_alignment) | |
| /* Floating point suport: | |
| Should the processor trap for all floating point instructions (as | |
| if the hardware wasn't implemented) or implement the floating point | |
| instructions directly. */ | |
| #if defined (WITH_FLOATING_POINT) | |
| #define SOFT_FLOATING_POINT 1 | |
| #define HARD_FLOATING_POINT 2 | |
| extern int current_floating_point; | |
| #define CURRENT_FLOATING_POINT (WITH_FLOATING_POINT \ | |
| ? WITH_FLOATING_POINT \ | |
| : current_floating_point) | |
| #endif | |
| /* Engine module. | |
| Use the common start/stop/restart framework (sim-engine). | |
| Simulators using the other modules but not the engine should define | |
| WITH_ENGINE=0. */ | |
| #ifndef WITH_ENGINE | |
| #define WITH_ENGINE 1 | |
| #endif | |
| /* Debugging: | |
| Control the inclusion of debugging code. | |
| Debugging is only turned on in rare circumstances [say during development] | |
| and is not intended to be turned on otherwise. */ | |
| #ifndef WITH_DEBUG | |
| #define WITH_DEBUG 0 | |
| #endif | |
| /* Include the tracing code. Disabling this eliminates all tracing | |
| code */ | |
| #ifndef WITH_TRACE | |
| #define WITH_TRACE (-1) | |
| #endif | |
| /* Include the profiling code. Disabling this eliminates all profiling | |
| code. */ | |
| #ifndef WITH_PROFILE | |
| #define WITH_PROFILE (-1) | |
| #endif | |
| /* include code that checks assertions scattered through out the | |
| program */ | |
| #ifndef WITH_ASSERT | |
| #define WITH_ASSERT 1 | |
| #endif | |
| /* Whether to check instructions for reserved bits being set */ | |
| /* #define WITH_RESERVED_BITS 1 */ | |
| /* include monitoring code */ | |
| #define MONITOR_INSTRUCTION_ISSUE 1 | |
| #define MONITOR_LOAD_STORE_UNIT 2 | |
| /* do not define WITH_MON by default */ | |
| #define DEFAULT_WITH_MON (MONITOR_LOAD_STORE_UNIT \ | |
| | MONITOR_INSTRUCTION_ISSUE) | |
| /* Current CPU model (models are in the generated models.h include file) */ | |
| #ifndef WITH_MODEL | |
| #define WITH_MODEL 0 | |
| #endif | |
| #define CURRENT_MODEL (WITH_MODEL \ | |
| ? WITH_MODEL \ | |
| : current_model) | |
| #ifndef WITH_DEFAULT_MODEL | |
| #define WITH_DEFAULT_MODEL DEFAULT_MODEL | |
| #endif | |
| #define MODEL_ISSUE_IGNORE (-1) | |
| #define MODEL_ISSUE_PROCESS 1 | |
| #ifndef WITH_MODEL_ISSUE | |
| #define WITH_MODEL_ISSUE 0 | |
| #endif | |
| extern int current_model_issue; | |
| #define CURRENT_MODEL_ISSUE (WITH_MODEL_ISSUE \ | |
| ? WITH_MODEL_ISSUE \ | |
| : current_model_issue) | |
| /* Whether or not input/output just uses stdio, or uses printf_filtered for | |
| output, and polling input for input. */ | |
| #define DONT_USE_STDIO 2 | |
| #define DO_USE_STDIO 1 | |
| #ifndef WITH_STDIO | |
| #define WITH_STDIO 0 | |
| #endif | |
| extern int current_stdio; | |
| #define CURRENT_STDIO (WITH_STDIO \ | |
| ? WITH_STDIO \ | |
| : current_stdio) | |
| /* Specify that configured calls pass parameters in registers when the | |
| convention is that they are placed on the stack */ | |
| #ifndef WITH_REGPARM | |
| #define WITH_REGPARM 0 | |
| #endif | |
| /* Specify that configured calls use an alternative calling mechanism */ | |
| #ifndef WITH_STDCALL | |
| #define WITH_STDCALL 0 | |
| #endif | |
| /* Set the default state configuration, before parsing argv. */ | |
| extern void sim_config_default (SIM_DESC sd); | |
| /* Complete and verify the simulator configuration. */ | |
| extern SIM_RC sim_config (SIM_DESC sd); | |
| /* Print the simulator configuration. */ | |
| extern void print_sim_config (SIM_DESC sd); | |
| #endif |