gdb/testsuite/gdb.server/target-exec-file.exp

# This testcase is part of GDB, the GNU debugger.

# Copyright 2023-2024 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Test GDB's handling of using a file with a 'target:' prefix as the
# executable file.  This test includes checking what happens when the
# file on the target system changes and GDB needs to reload it.

load_lib gdbserver-support.exp

require allow_gdbserver_tests !use_gdb_stub

standard_testfile

if { [build_executable "failed to prepare" $testfile $srcfile debug] } {
    return -1
}

clean_restart

# Some boards specifically set the sysroot to the empty string to
# avoid copying files from the target.  But for this test we do want
# to copy files from the target, so set the sysroot back to 'target:'.
#
# This is fine so long as we're not using a board file that sets the
# sysroot to something else -- but none of the standard boards do
# this, and plenty of other tests mess with the sysroot, so I guess we
# don't worry about that too much.
gdb_test "set sysroot target:" ".*"

# Make sure we're disconnected, in case we're testing with an
# extended-remote board, therefore already connected.
gdb_test "disconnect" ".*"

# Ensure the executable is on the target.
set target_exec [gdb_remote_download target $binfile]

# We're going to be restarting the inferior.  Lets ask GDB not to
# prompt us if this is the right thing to do.
gdb_test_no_output "set confirm off"

if { [allow_python_tests] } {
    # Register an event handler for the executable changed event.
    # This handler just copies the event into a global Python object.
    gdb_test_multiline "Add connection_removed event" \
	"python" "" \
	"global_exec_changed_event = None" "" \
	"def executable_changed(event):" "" \
	"   global global_exec_changed_event" "" \
	"   global_exec_changed_event = event" "" \
	"gdb.events.executable_changed.connect (executable_changed)" "" \
	"end" ""
}

# Start gdbserver, but always in extended-remote mode, and then
# connect to it from GDB.
set res [gdbserver_start "--multi" $target_exec]
set gdbserver_protocol "extended-remote"
set gdbserver_gdbport [lindex $res 1]
gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport

if { [allow_python_tests] } {
    # When connecting to a remote target, if the user has not told GDB
    # which executable to use, then GDB will figure out an executable
    # from the remote target.
    #
    # As a result we expect to have seen an executable changed event.
    with_test_prefix "after connecting" {
	gdb_test "python print(global_exec_changed_event)" \
	    "<gdb.ExecutableChangedEvent object at $hex>"
	gdb_test "python print(global_exec_changed_event.progspace.executable_filename)" \
	    [string_to_regexp target:$target_exec]
	gdb_test "python print(global_exec_changed_event.reload)" "False"
	gdb_test_no_output "python global_exec_changed_event = None"
    }
}

# Issue a 'file' command and parse the output.  We look for a couple
# of specific things to ensure that we are correctly reading the exec
# from the remote target.
set saw_read_of_remote_exec false
set saw_read_of_syms_from_exec false
gdb_test_multiple "file target:$target_exec" "run file command" {
    -re "^file target:\[^\r\n\]+\r\n" {
	exp_continue
    }

    -re "^Reading (\[^\r\n\]+) from remote target\\.\\.\\.\r\n" {
	set filename $expect_out(1,string)
	if { $filename eq $target_exec } {
	    set saw_read_of_remote_exec true
	}
	exp_continue
    }

    -re "^warning: File transfers from remote targets can be slow\[^\r\n\]+\r\n" {
	exp_continue
    }

    -re "^Reading symbols from target:(\[^\r\n\]+)\\.\\.\\.\r\n" {
	set filename $expect_out(1,string)
	if { $filename eq $target_exec } {
	    set saw_read_of_syms_from_exec true
	}
	exp_continue
    }

    -re "^Expanding full symbols from \[^\r\n\]+\r\n" {
	exp_continue
    }

    -re "^$gdb_prompt $" {
	pass $gdb_test_name
    }
}

gdb_assert { $saw_read_of_remote_exec } \
    "exec was read from the remote target"

gdb_assert { $saw_read_of_syms_from_exec } \
    "symbols were read from remote exec file"

if { [allow_python_tests] } {
    # The 'file' command forces GDB to always load the executable,
    # even if the same filename is used.  In this case, as the
    # filename is the same, this will show as a reload event.
    with_test_prefix "after 'file' command" {
	gdb_test "python print(global_exec_changed_event)" \
	    "<gdb.ExecutableChangedEvent object at $hex>"
	gdb_test "python print(global_exec_changed_event.progspace.executable_filename)" \
	    [string_to_regexp target:$target_exec]
	gdb_test "python print(global_exec_changed_event.reload)" "True"
	gdb_test_no_output "python global_exec_changed_event = None"
    }
}

# Start the inferior (with the 'start' command), use TESTNAME for any
# pass/fail calls.  EXPECT_REREAD should be true or false and
# indicates if we expect to too a line like:
#
#  `FILE' has changed; re-reading symbols.
proc start_inferior { testname expect_reread } {
    with_test_prefix $testname {
	if { [gdb_start_cmd] < 0 } {
	    fail "start command"
	    return -1
	}

	set saw_reread false
	gdb_test_multiple "" "stopped at main" {
	    -re "^start\\s*\r\n" {
		exp_continue
	    }
	    -re "^`\[^\r\n\]+' has changed; re-reading symbols\\.\r\n" {
		set saw_reread true
		exp_continue
	    }
	    -re "^Reading \[^\r\n\]+ from remote target\\.\\.\\.\r\n" {
		exp_continue
	    }
	    -re "^Expanding full symbols from \[^\r\n\]+\\.\\.\\.\r\n" {
		exp_continue
	    }
	    -re "^Temporary breakpoint $::decimal at $::hex: \[^\r\n\]+\r\n" {
		exp_continue
	    }
	    -re "^Starting program: \[^\r\n\]+\r\n" {
		exp_continue
	    }
	    -re "^\\s*\r\n" {
		exp_continue
	    }
	    -re "^Temporary breakpoint $::decimal, main \\(\\) at .*$::gdb_prompt $" {
		pass $testname
	    }
	}

	gdb_assert { $expect_reread == $saw_reread } \
	    "check symbol re-read behaviour"
    }
}

# Start the inferior for the first time.  The symbols were already
# read from the file when the 'file' command was used, we should not
# see the symbols re-read now.
start_inferior "start inferior the first time" false

if { [allow_python_tests] } {
    # The executable hasn't changed.
    with_test_prefix "after starting inferior for the first time" {
	gdb_test "python print(global_exec_changed_event)" "None"
    }
}

# Re-start the inferior.  The executable is unchanged so we should not
# see the symbol file being re-read.
start_inferior "start inferior a second time" false

if { [allow_python_tests] } {
    # The executable still hasn't changed.
    with_test_prefix "after starting inferior for the second time" {
	gdb_test "python print(global_exec_changed_event)" "None"
    }
}

# Delay for a short while so, when we touch the exec, we know the
# timestamp will change.
sleep 1
set res [remote_exec target "touch $target_exec"]
set status [lindex $res 0]
if { $status != 0 } {
    fail "touching executable on target"
    return -1
}

# Start the inferior again, we expect to see the symbols being re-read
# from the remote file.
start_inferior "start inferior a third time" true

if { [allow_python_tests] } {
    # The executable has now changed on disk.  This will be a reload
    # event.
    with_test_prefix "after starting inferior for the third time" {
	gdb_test "python print(global_exec_changed_event)" \
	    "<gdb.ExecutableChangedEvent object at $hex>"
	gdb_test "python print(global_exec_changed_event.progspace.executable_filename)" \
	    [string_to_regexp target:$target_exec]
	gdb_test "python print(global_exec_changed_event.reload)" "True"
	gdb_test_no_output "python global_exec_changed_event = None"
    }
}