| # Copyright (C) 1988, 1990, 1991, 1992, 1997 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| # |
| # test special commands (if, while, etc) |
| # |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "run" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/commands |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| gdb_exit |
| gdb_start |
| delete_breakpoints |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| proc gdbvar_simple_if_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 0" "" "set foo in gdbvar_simple_if_test" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1" |
| # All this test should do is print 0xfeedface once. |
| gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2" |
| } |
| |
| proc gdbvar_simple_while_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 5" "" "set foo in gdbvar_simple_while_test" |
| # This test should print 0xfeedface five times. |
| gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_while_test #1" |
| } |
| |
| proc gdbvar_complex_if_while_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 4" "" "set foo in gdbvar complex_if_while_test" |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_complex_if_while_test #1" |
| } |
| |
| proc progvar_simple_if_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_if_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #1" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "progvar_simple_if_test #1" |
| # All this test should do is print 0xfeedface once. |
| gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "progvar_simple_if_test #2" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc progvar_simple_while_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_while_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #2" |
| # This test should print 0xfeedface five times. |
| gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_simple_while_test #1" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc progvar_complex_if_while_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_if_while_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| gdb_test "p value=4" "" "set value to 4 in progvar_simple_if_test" |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_complex_if_while_test #1" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc if_while_breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping if_while_breakpoint_command_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test" |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1" |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "End with" { |
| pass "commands in if_while_breakpoint_command_test" |
| } |
| default { |
| fail "(timeout or eof) commands in if_while_breakpoint_command_test" |
| } |
| } |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "commands part 2 in if_while_breakpoint_command_test" |
| gdb_test "continue" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "if_while_breakpoint_command_test #1" |
| gdb_test "info break" "while.*set.*if.*p/x.*else.*p/x.*end.*" "info break in if_while_breakpoint_command_test" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test that we can run the inferior from breakpoint commands. |
| proc infrun_breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping infrun_breakpoint_command_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #1" |
| delete_breakpoints |
| gdb_test "break factorial if value == 5" "Breakpoint.*at.*" |
| |
| # infrun_breakpoint_command_test - This test was broken into two parts |
| # to get around a synchronization problem in expect. |
| # part1: issue the gdb command "commands" |
| # part2: send the list of commands |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "End with" { |
| pass "commands in infrun_breakpoint_command_test #1" |
| } |
| default { |
| fail "(timeout or eof) commands in infrun_breakpoint_command_test" |
| } |
| } |
| gdb_test "step\nstep\nstep\nstep\nbt\nend" "" \ |
| "commands in infrun_breakpoint_command_test #2" |
| |
| gdb_test "continue" "Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.* |
| \[0-9\]*\[ \]*if \\(value > 1\\) \{.* |
| \[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.* |
| factorial \\(value=4\\) at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.* |
| \[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.* |
| factorial \\(value=3\\) at .* |
| \[0-9\]*\[ \]*if \\(value > 1\\) \{.* |
| #0 factorial \\(value=3\\).* |
| #1 \[0-9a-fx\]* in factorial \\(value=4\\).* |
| #2 \[0-9a-fx\]* in factorial \\(value=5\\).* |
| #3 \[0-9a-fx\]* in factorial \\(value=6\\).* |
| #4 \[0-9a-fx\]* in main \\(.*\\).*" \ |
| "continue in infrun_breakpoint_command_test"; |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping breakpoint_command_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #2" |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2" |
| gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \ |
| "Type commands.*\nEnd with.*" "commands in breakpoint_command_test" |
| gdb_test "continue" "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \ |
| "continue in breakpoint_command_test" |
| gdb_test "print value" " = 5" "print value in breakpoint_command_test" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test a simple user defined command (with arguments) |
| proc user_defined_command_test {} { |
| global gdb_prompt |
| |
| gdb_test "set \$foo = 4" "" "set foo in user_defined_command_test" |
| |
| send_gdb "define mycommand\n" |
| gdb_expect { |
| -re "End with" { |
| pass "define mycommand in user_defined_command_test" |
| } |
| default { |
| fail "(timeout or eof) define mycommand in user_defined_command_test" |
| } |
| } |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "enter commands in user_defined_command_test" |
| |
| gdb_test "mycommand \$foo" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "execute user defined command in user_defined_command_test" |
| gdb_test "show user mycommand" "while.*set.*if.*p/x.*else.*p/x.*end.*" "display user command in user_defined_command_test" |
| } |
| |
| |
| |
| proc test_command_prompt_position {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping test_command_prompt_position because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't currently |
| # support it. Bash value variable to be what we want. |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2" |
| gdb_test "p value=5" "" "set value to 5 in test_command_prompt_position" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "if test in test_command_prompt_position" |
| |
| # Now let's test for the correct position of the '>' in gdb's prompt for commands. |
| # It should be at the beginning of the line, and not after one space. |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "Type commands.*End with.*\[\r\n\]>$" \ |
| { send_gdb "printf \"Now the value is %d\\n\", value\n" |
| gdb_expect { |
| -re "^printf.*value\r\n>$" \ |
| { send_gdb "end\n" |
| gdb_expect { |
| -re "^end\r\n$gdb_prompt $" { pass "> OK in test_command_prompt_position" } |
| -re ".*$gdb_prompt $" { fail "some other message in test_command_prompt_position" } |
| timeout { fail "(timeout) 1 in test_command_prompt_position" } |
| } |
| } |
| -re "^ >$" { fail "> not OK in test_command_prompt_position" } |
| -re ".*$gdb_prompt $" { fail "wrong message in test_command_prompt_position" } |
| timeout { fail "(timeout) 2 in test_command_prompt_position " } |
| } |
| } |
| -re "Type commands.*End with.*\[\r\n\] >$" { fail "prompt not OK in test_command_prompt_position" } |
| -re ".*$gdb_prompt $" { fail "commands in test_command_prompt_position" } |
| timeout { fail "(timeout) 3 commands in test_command_prompt_position" } |
| } |
| |
| gdb_stop_suppressing_tests; |
| } |
| |
| |
| gdbvar_simple_if_test |
| gdbvar_simple_while_test |
| gdbvar_complex_if_while_test |
| progvar_simple_if_test |
| progvar_simple_while_test |
| progvar_complex_if_while_test |
| if_while_breakpoint_command_test |
| infrun_breakpoint_command_test |
| breakpoint_command_test |
| user_defined_command_test |
| test_command_prompt_position |
| |
| |
| |
| |
