| 2016-12-31 Dimitar Dimitrov <dimitar@dinux.eu> |
| |
| * NEWS: Mention new PRU target. |
| * Makefile.am: Add PRU target. |
| * config/obj-elf.c: Ditto. |
| * configure.tgt: Ditto. |
| * config/tc-pru.c: New file. |
| * config/tc-pru.h: New file. |
| * doc/Makefile.am: Add documentation for PRU GAS port. |
| * doc/all.texi, Ditto. |
| * doc/as.texinfo: Ditto. |
| * doc/c-pru.texi: Document PRU GAS options. |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| * testsuite/gas/pru/alu.d: New file for PRU GAS testsuite. |
| * testsuite/gas/pru/alu.s: Ditto. |
| * testsuite/gas/pru/branch.d: Ditto. |
| * testsuite/gas/pru/branch.s: Ditto. |
| * testsuite/gas/pru/illegal.l: Ditto. |
| * testsuite/gas/pru/illegal.s: Ditto. |
| * testsuite/gas/pru/ldi.d: Ditto. |
| * testsuite/gas/pru/ldi.s: Ditto. |
| * testsuite/gas/pru/ldst.d: Ditto. |
| * testsuite/gas/pru/ldst.s: Ditto. |
| * testsuite/gas/pru/loop.d: Ditto. |
| * testsuite/gas/pru/loop.s: Ditto. |
| * testsuite/gas/pru/misc.d: Ditto. |
| * testsuite/gas/pru/misc.s: Ditto. |
| * testsuite/gas/pru/pru.exp: Ditto. |
| * testsuite/gas/pru/pseudo.d: Ditto. |
| * testsuite/gas/pru/pseudo.s: Ditto. |
| * testsuite/gas/pru/warn_reglabel.l: Ditto. |
| * testsuite/gas/pru/warn_reglabel.s: Ditto. |
| * testsuite/gas/pru/xfr.d: Ditto. |
| * testsuite/gas/pru/xfr.s: Ditto. |
| * testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-asmacro.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test. |
| * testsuite/gas/mips/mips16-asmacro.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend' |
| use to operands whose LSB position is zero. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (match_mips16_insn): Don't update |
| `forced_insn_length' or the instruction opcode if an operand |
| requires an extended instruction form, but an unextended one |
| has been requested. |
| * testsuite/gas/mips/mips16-relax-unextended-1.d: New test. |
| * testsuite/gas/mips/mips16-relax-unextended-2.d: New test. |
| * testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-relax-unextended-1.s: New test |
| source. |
| * testsuite/gas/mips/mips16-relax-unextended-2.s: New test |
| source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips16_macro_build): Replace `0' and `4' |
| operand codes with `.' and `F' respectively. |
| (mips16_macro): Likewise. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix |
| instruction size override for INSN2_SHORT_ONLY opcode table |
| entries. |
| * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. |
| * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. |
| * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error |
| messages. |
| * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error |
| messages. |
| * testsuite/gas/mips/mips16-insn-e.d: New test. |
| * testsuite/gas/mips/mips16-insn-t.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. |
| * testsuite/gas/mips/mips16-insn-e.l: New stderr output. |
| * testsuite/gas/mips/mips16-insn-t.l: New stderr output. |
| * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-insn-e.s: New test source. |
| * testsuite/gas/mips/mips16-insn-t.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (match_mips16_insn): Remove the `6' operand |
| code special case and its associated comment. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction |
| suffixes followed by a null character rather than a space too. |
| * testsuite/gas/mips/mips16-insn-length-noargs.d: New test. |
| * testsuite/gas/mips/mips16-insn-length-noargs.s: New test |
| source. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-extend-swap.d: New test. |
| * testsuite/gas/mips/mips16-extend-swap.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-12-23 Joe Seymour <joe.s@somniumtech.com> |
| |
| * config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's |
| devices.csv file as of September 2016. |
| |
| 2016-12-23 Tristan Gingold <gingold@adacore.com> |
| |
| * configure: Regenerate. |
| |
| 2016-12-23 Tristan Gingold <gingold@adacore.com> |
| |
| * NEWS: Add marker for 2.28. |
| |
| 2016-12-23 Tristan Gingold <gingold@adacore.com> |
| |
| * po/gas.pot: Regenerate. |
| |
| 2016-12-21 Andrew Waterman <andrew@sifive.com> |
| |
| * config/tc-riscv.c (riscv_make_nops): Emit 2-byte NOPs. |
| (riscv_frag_align_code): Correct frag_align_code arg. |
| |
| 2016-12-21 Tim Newsome <tim@sifive.com> |
| |
| * config/tc-riscv.c (riscv_pre_output_hook): Remove const from |
| loc4_frag. |
| |
| 2016-12-21 Alan Modra <amodra@gmail.com> |
| |
| * doc/c-lm32.texi: Fix chars with high bit set. |
| * testsuite/gas/bfin/vector2.s: Likewise. |
| |
| 2016-12-21 Alan Modra <amodra@gmail.com> |
| |
| PR gas/10946 |
| * doc/as.texinfo (Chars): Document escape sequences. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-sub.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-sub.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16-sub.d: New test. |
| * testsuite/gas/mips/mips16e-sub.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16e-sub.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16e-sub.d: New test. |
| * testsuite/gas/mips/mips16e-64-sub.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test. |
| * testsuite/gas/mips/mips16-sub.s: New test source. |
| * testsuite/gas/mips/mips16e-sub.s: New test source. |
| * testsuite/gas/mips/mips16e-64-sub.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16e.s: Add a RESTORE instruction. |
| * testsuite/gas/mips/mips16e.d: Adjust accordingly. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16 |
| ISA testing. |
| * testsuite/gas/mips/mips16-64.d: Adjust test for multiple |
| MIPS16 ISA testing. |
| * testsuite/gas/mips/mips16e-64.d: Adjust test for multiple |
| MIPS16 ISA testing. |
| * testsuite/gas/mips/mips16-macro.d: Adjust test for multiple |
| MIPS16 ISA testing. |
| * testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation. |
| * testsuite/gas/mips/mips16e-64.l: Rename to... |
| * testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this. |
| * testsuite/gas/mips/mips16-64@mips16.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16-64.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16e-64.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-macro.d: New test. |
| * testsuite/gas/mips/mips16-64@mips16-macro.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16-macro.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test. |
| * testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test. |
| * testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output. |
| * testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr |
| output. |
| * testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr |
| output. |
| * testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64', |
| `mips16-macro', `mips16-macro-t', `mips16-macro-e' and |
| `mips16e-64' testing across multiple MIPS16 ISAs. Fold |
| `mips16-macro' and `mips16e-64' list test invocations into |
| corresponding dump tests. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips.exp (run_dump_test_arch): Add |
| `mips16e' and `mips16' prefixes. |
| (run_list_test_arch): Likewise. |
| Rename `mips16' architecture to `mips16-32'. Add `mips16-64', |
| `mips16e-32' and `mips16e-64' architectures. Update `rol64', |
| `mips16e', `elf${el}-rel2' and `elf-rel4' test invocations |
| accordingly. |
| * testsuite/gas/mips/mips16e@branch-swap-3.d: New test. |
| * testsuite/gas/mips/mips16e@branch-swap-4.d: New test. |
| * testsuite/gas/mips/mips16e@loc-swap-dis.d: New test. |
| * testsuite/gas/mips/mips16e@loc-swap.d: New test. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/loc-swap.s: Use zeros rather than NOPs for |
| trailing alignment padding. |
| * testsuite/gas/mips/loc-swap.d: Adjust accordingly. |
| * testsuite/gas/mips/micromips@loc-swap.d: Likewise. |
| * testsuite/gas/mips/mips16@loc-swap-dis.d: Likewise. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (micromips_insn_length): Use |
| `mips_opcode_32bit_p'. |
| (is_size_valid): Adjust description. |
| (is_size_valid_16): New function. |
| (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 |
| operand decoding. |
| (validate_mips16_insn): Remove `a' and `i' operand code special |
| casing, use `mips_opcode_32bit_p' to determine instruction |
| width. |
| (append_insn): Adjust forced MIPS16 instruction size |
| determination. |
| (match_mips16_insn): Likewise. Don't shift the instruction's |
| opcode with the `a' and `i' operand codes. Use |
| `mips_opcode_32bit_p' in operand decoding. |
| (match_mips16_insns): Check for forced instruction size's |
| validity. |
| (mips16_ip): Don't force instruction size in the `noautoextend' |
| mode. |
| * testsuite/gas/mips/mips16-jal-e.d: New test. |
| * testsuite/gas/mips/mips16-jal-t.d: New test. |
| * testsuite/gas/mips/mips16-macro-e.d: New test. |
| * testsuite/gas/mips/mips16-macro-t.d: New test. |
| * testsuite/gas/mips/mips16-jal-t.l: New stderr output. |
| * testsuite/gas/mips/mips16-macro-e.l: New stderr output. |
| * testsuite/gas/mips/mips16-macro-t.l: New stderr output. |
| * testsuite/gas/mips/mips16-jal-e.s: New test source. |
| * testsuite/gas/mips/mips16-jal-t.s: New test source. |
| * testsuite/gas/mips/mips16-macro-e.s: New test source. |
| * testsuite/gas/mips/mips16-macro-t.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-macro.l: New list test. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-sdrasp.d: New test. |
| * testsuite/gas/mips/mips16-sdrasp.l: New stderr output. |
| * testsuite/gas/mips/mips16-sdrasp.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips.exp: Limit remaining tests that |
| require NewABI support to `has_newabi' targets. |
| |
| 2015-12-20 Andrew Waterman <andrew@sifive.com> |
| |
| * config/tc-riscv.c (riscv_pseudo_table): Remove "align", |
| "p2align", and "balign". |
| (s_align): Remove. |
| (riscv_handle_align): New function. |
| (riscv_frag_align_code): Likewise. |
| (riscv_make_nops): Likewise. |
| * config/tc-riscv.h (MAX_MEM_FOR_RS_ALIGN_CODE): Change to 7. |
| (HANDLE_ALIGN): Define. |
| (md_do_align): Define. |
| (riscv_handle_align): Declare. |
| (riscv_frag_align_code): Likewise. |
| |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> |
| |
| * config/tc-riscv.h (xlen): Delete. |
| * config/tc-riscv.c (xlen): Make static. |
| (abi_xlen): New variable. |
| (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} |
| with OPTION_MABI. |
| (md_longopts): Likewise. |
| (md_parse_option): Likewise. |
| (riscv_elf_final_processing): Likewise. |
| * doc/as.texinfo (Target RISC-V options): Likewise. |
| * doc/c-riscv.texi (OPTIONS): Likewise. |
| * config/tc-riscv.c (float_mode): Removed. |
| (float_abi): New type, specifies the floating-point ABI. |
| (riscv_set_abi): New function. |
| (riscv_add_subset): Only allow lower-case ISA names and require |
| them to start with "rv". |
| (riscv_after_parse_args): Likewise. |
| |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> |
| Kuan-Lin Chen <kuanlinchentw@gmail.com> |
| |
| * config/tc-riscv.c (riscv_set_options): Add relax. |
| (riscv_opts): Likewise. |
| (s_riscv_option): Add relax and norelax. |
| (riscv_apply_const_reloc): New function. |
| (append_insn): Move constant relocation handling to |
| riscv_apply_const_reloc. |
| (md_pcrel_from): Likewise. |
| (parse_relocation): Skip BFD_RELOC_UNUSED. |
| (md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6, |
| BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA. |
| (md_apply_fix): Likewise. |
| (riscv_pre_output_hook): New function. |
| * config/tc-riscv.h (md_pre_output_hook): Define. |
| (riscv_pre_output_hook): Declare. |
| (DWARF_CIE_DATA_ALIGNMENT): Always -4. |
| |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> |
| |
| * config/tc-riscv.c: Formatting and comment fixes throughout. |
| |
| 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (md_convert_frag): Report an error instead of |
| asserting on `ext'. |
| * testsuite/gas/mips/mips16-branch-unextended-1.d: New test. |
| * testsuite/gas/mips/mips16-branch-unextended-2.d: New test. |
| * testsuite/gas/mips/mips16-branch-unextended-1.s: New test |
| source. |
| * testsuite/gas/mips/mips16-branch-unextended-2.s: New test. |
| * testsuite/gas/mips/mips16-branch-unextended.l: New stderr |
| output. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-sprel-swap.d: New test. |
| * testsuite/gas/mips/mips16-sprel-swap.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-12-13 Renlin Li <renlin.li@arm.com> |
| |
| * config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register. |
| (get_reg_expected_msg): Remove CN register case. |
| (parse_operands): rewrite parser for CRn, CRm operand. |
| (reg_names): Remove CN register. |
| * testsuite/gas/aarch64/diagnostic.s: Add a new test case. |
| * testsuite/gas/aarch64/diagnostic.l: Adjust error message. |
| |
| 2016-12-13 Jiong Wang <jiong.wang@arm.com> |
| |
| * gas/testsuite/gas/aarch64/addsub.d: Support ILP32 mode. |
| * gas/testsuite/gas/aarch64/advsimd-across.d: Likewise. |
| * gas/testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise. |
| * gas/testsuite/gas/aarch64/advsimd-fp16.d: Likewise. |
| * gas/testsuite/gas/aarch64/advsimd-misc.d: Likewise. |
| * gas/testsuite/gas/aarch64/advsisd-copy.d: Likewise. |
| * gas/testsuite/gas/aarch64/advsisd-misc.d: Likewise. |
| * gas/testsuite/gas/aarch64/alias.d: Likewise. |
| * gas/testsuite/gas/aarch64/armv8-ras-1.d: Likewise. |
| * gas/testsuite/gas/aarch64/b_1.d: Likewise. |
| * gas/testsuite/gas/aarch64/beq_1.d: Likewise. |
| * gas/testsuite/gas/aarch64/bitfield-dump: Likewise. |
| * gas/testsuite/gas/aarch64/bitfield-no-aliases.d: Likewise. |
| * gas/testsuite/gas/aarch64/codealign.d: Likewise. |
| * gas/testsuite/gas/aarch64/codealign_1.d: Likewise. |
| * gas/testsuite/gas/aarch64/crc32-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/crc32.d: Likewise. |
| * gas/testsuite/gas/aarch64/crypto-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/crypto.d: Likewise. |
| * gas/testsuite/gas/aarch64/dwarf.d: Likewise. |
| * gas/testsuite/gas/aarch64/float-fp16.d: Likewise. |
| * gas/testsuite/gas/aarch64/floatdp2.d: Likewise. |
| * gas/testsuite/gas/aarch64/fp-armv8_3.d: Likewise. |
| * gas/testsuite/gas/aarch64/fp-const0-parse.d: Likewise. |
| * gas/testsuite/gas/aarch64/fp_cvt_int.d: Likewise. |
| * gas/testsuite/gas/aarch64/fpmov.d: Likewise. |
| * gas/testsuite/gas/aarch64/inst-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldr_1.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-exclusive.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-reg-imm-post-ind.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-reg-imm-pre-ind.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-reg-pair.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-reg-reg-offset.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-reg-uns-imm.d: Likewise. |
| * gas/testsuite/gas/aarch64/ldst-reg-unscaled-imm.d: Likewise. |
| * gas/testsuite/gas/aarch64/lor-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/lor.d: Likewise. |
| * gas/testsuite/gas/aarch64/lse-atomic.d: Likewise. |
| * gas/testsuite/gas/aarch64/mapmisc.d: Likewise. |
| * gas/testsuite/gas/aarch64/mov-no-aliases.d: Likewise. |
| * gas/testsuite/gas/aarch64/mov.d: Likewise. |
| * gas/testsuite/gas/aarch64/movi.d: Likewise. |
| * gas/testsuite/gas/aarch64/movw_label.d: Likewise. |
| * gas/testsuite/gas/aarch64/msr.d: Likewise. |
| * gas/testsuite/gas/aarch64/neon-fp-cvt-int.d: Likewise. |
| * gas/testsuite/gas/aarch64/neon-frint.d: Likewise. |
| * gas/testsuite/gas/aarch64/neon-ins.d: Likewise. |
| * gas/testsuite/gas/aarch64/neon-not.d: Likewise. |
| * gas/testsuite/gas/aarch64/neon-vfp-reglist-post.d: Likewise. |
| * gas/testsuite/gas/aarch64/neon-vfp-reglist.d: Likewise. |
| * gas/testsuite/gas/aarch64/no-aliases.d: Likewise. |
| * gas/testsuite/gas/aarch64/optional.d: Likewise. |
| * gas/testsuite/gas/aarch64/pac.d: Likewise. |
| * gas/testsuite/gas/aarch64/pan-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/pan.d: Likewise. |
| * gas/testsuite/gas/aarch64/rdma-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/rdma.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_g0.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_g0_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_g1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_hi12.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12-1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsldm-1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsldm-page-1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsldm_lo12_nc-1.d: Likewise. |
| * gas/testsuite/gas/aarch64/shifted.d: Likewise. |
| * gas/testsuite/gas/aarch64/sve.d: Likewise. |
| * gas/testsuite/gas/aarch64/symbol.d: Likewise. |
| * gas/testsuite/gas/aarch64/sysreg-1.d: Likewise. |
| * gas/testsuite/gas/aarch64/sysreg-2.d: Likewise. |
| * gas/testsuite/gas/aarch64/sysreg-3.d: Likewise. |
| * gas/testsuite/gas/aarch64/sysreg.d: Likewise. |
| * gas/testsuite/gas/aarch64/system-2.d: Likewise. |
| * gas/testsuite/gas/aarch64/system-3.d: Likewise. |
| * gas/testsuite/gas/aarch64/system.d: Likewise. |
| * gas/testsuite/gas/aarch64/tbz_1.d: Likewise. |
| * gas/testsuite/gas/aarch64/tlbi_op.d: Likewise. |
| * gas/testsuite/gas/aarch64/tls.d: Likewise. |
| * gas/testsuite/gas/aarch64/uao-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/uao.d: Likewise. |
| * gas/testsuite/gas/aarch64/virthostext-directive.d: Likewise. |
| * gas/testsuite/gas/aarch64/virthostext.d: Likewise. |
| * gas/testsuite/gas/aarch64/adr_1.d: Restrict test under -mabi=lp64. |
| * gas/testsuite/gas/aarch64/int-insns.d: Likewise. |
| * gas/testsuite/gas/aarch64/programmer-friendly.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-data.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_g1_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_g2.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst16.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst32.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst64.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst8.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst16.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst32.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst64.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst8.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-gotoff_g0_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-gotoff_g1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-gottprel_g0_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-gottprel_g1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-insn.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsdesc_off_g0_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsdesc_off_g1.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsgd_g0_nc.d: Likewise. |
| * gas/testsuite/gas/aarch64/reloc-tlsgd_g1.d: Likewise. |
| * gas/testsuite/gas/aarch64/tail_padding.d: Likewise. |
| * gas/testsuite/gas/aarch64/tls-desc.d: Likewise. |
| |
| 2016-12-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips16_macro_build) <'>'>: Remove case. |
| |
| 2016-12-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-extend.d: New test. |
| * testsuite/gas/mips/mips16-extend.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-12-08 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-arc.c (arc_show_cpu_list): Rename `spaces' local |
| variable to `space_buf'. |
| |
| 2016-12-08 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-arm.c (encode_arm_shift): Rename `index' local |
| variable to `op_index'. |
| |
| 2016-12-08 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2016-12-07 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (is_opcode_valid): Use local `isa' |
| consistently. |
| |
| 2016-12-06 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20901 |
| * read.c (s_space): Place an upper limit on the number of spaces |
| generated. |
| |
| PR gas/20896 |
| * testsuite/gas/mmix/err-byte1.s: Adjust expected warning messages |
| to account for patch to next_char_of_string. |
| |
| 2016-12-05 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20902 |
| * read.c (next_char_of_string): Do end advance past the end of the |
| buffer. |
| |
| PR gas/20904 |
| * as.h (SKIP_ALL_WHITESPACE): New macro. |
| * expr.c (operand): Use it. |
| |
| 2016-12-05 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-arm.c (do_vcmla, do_vcadd): Define. |
| (neon_scalar_for_vcmla): Define. |
| (enum operand_parse_code): Add OP_IROT1 and OP_IROT2. |
| (NEON_ENC_TAB): Add DDSI and QQSI variants. |
| (insns): Add vcmla and vcadd. |
| * testsuite/gas/arm/armv8_3-a-simd.d: New. |
| * testsuite/gas/arm/armv8_3-a-simd.s: New. |
| * testsuite/gas/arm/armv8_3-a-simd-bad.d: New. |
| * testsuite/gas/arm/armv8_3-a-simd-bad.l: New. |
| * testsuite/gas/arm/armv8_3-a-simd-bad.s: New. |
| |
| 2016-12-05 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/textauxregister-1.d: New file. |
| * testsuite/gas/arc/textauxregister-1.s: Likewise. |
| * testsuite/gas/arc/textcondcode-err.s: Likewise. |
| * testsuite/gas/arc/textcoreregister-err.s: Likewise. |
| * config/tc-arc.c (tokenize_extregister): Return bfd_boolean, |
| don't check second argument of extension auxiliary register for |
| signess. |
| (arc_extcorereg): Consider the return of tokenize_extregister |
| function call. |
| |
| 2016-12-05 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-arm.c (arm_ext_v8_3, do_vjcvt): Define. |
| (insns): Add vjcvt. |
| * testsuite/gas/aarch64/armv8_3-a-fp.s: New. |
| * testsuite/gas/aarch64/armv8_3-a-fp.d: New. |
| * testsuite/gas/aarch64/armv8_3-a-fp-bad.s: New. |
| * testsuite/gas/aarch64/armv8_3-a-fp-bad.d: New. |
| * testsuite/gas/aarch64/armv8_3-a-fp-bad.l: New. |
| |
| 2016-12-05 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-arm.c (arm_archs): Add "armv8.3-a". |
| * doc/c-arm.texi (-march): Add "armv8.3-a". |
| |
| 2016-12-02 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/cpu-em-err.s: New file. |
| * testsuite/gas/arc/cpu-em4-err.s: Likewise. |
| * testsuite/gas/arc/cpu-fpuda-err.s: Likewise. |
| * testsuite/gas/arc/cpu-hs-err.s: Likewise. |
| * testsuite/gas/arc/cpu-quarkse-err.s: Likewise. |
| * testsuite/gas/arc/noargs_a7.s: Add .cpu. |
| * config/tc-arc.c (ARC_CPU_TYPE_A6xx): Define. |
| (ARC_CPU_TYPE_A7xx): Likewise. |
| (ARC_CPU_TYPE_AV2EM): Likewise. |
| (ARC_CPU_TYPE_AV2HS): Likewise. |
| (cpu_types): Update list of known CPU names. |
| (arc_show_cpu_list): New function. |
| (md_show_usage): Print accepted CPU names. |
| (cl_features): New variable. |
| (arc_select_cpu): Use cl_features. |
| (arc_option): Allow various .cpu names. |
| (md_parse_option): Set cl_features. |
| * doc/c-arc.texi: Update -mcpu and .cpu documentation. |
| |
| 2016-12-02 Josh Conner <joshconner@google.com> |
| |
| * configure.tgt: Add support for fuchsia (OS). |
| |
| 2016-12-01 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20898 |
| * app.c (do_scrub_chars): Do not attempt to unget EOF. |
| |
| PR gas/20897 |
| * subsegs.c (subsegs_print_statistics): Do nothing if no output |
| file was created. |
| |
| PR gas/20895 |
| * symbols.c (resolve_symbol_value): Gracefully handle erroneous |
| symbolic expressions. |
| |
| 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (find_opcode_match): New function argument |
| errmsg. |
| (assemble_tokens): Collect and report the eventual error message |
| found during opcode matching process. |
| * testsuite/gas/arc/lpcount-err.s: New file. |
| * testsuite/gas/arc/add_s-err.s: Update error message. |
| |
| 2016-11-28 Ramiro Polla <ramiro@hex-rays.com> |
| Amit Pawar <amit.pawar@amd.com> |
| |
| PR binutils/20637 |
| * testsuite/gas/i386/xop32reg.d: New file. |
| * testsuite/gas/i386/xop32reg.s: New file. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2016-11-27 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> |
| |
| * arparse.y: Fix spelling in comments. |
| |
| 2016-11-27 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> |
| |
| * config/bfin-lex.l: Fix spelling in comments. |
| |
| 2016-11-27 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> |
| |
| * testsuite/gas/all/gas.exp: Fix spelling in comments. |
| * testsuite/gas/cris/cris.exp: Fix spelling in comments. |
| * testsuite/gas/hppa/basic/basic.exp: Fix spelling in comments. |
| * testsuite/gas/hppa/parse/parse.exp: Fix spelling in comments. |
| * testsuite/gas/hppa/reloc/reloc.exp: Fix spelling in comments. |
| * testsuite/gas/sh/arch/arch.exp: Fix spelling in comments. |
| * testsuite/gas/tic4x/tic4x.exp: Fix spelling in comments. |
| |
| 2016-11-27 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> |
| |
| * testsuite/gas/arm/local_function.d: Fix spelling in comments. |
| * testsuite/gas/arm/req.s: Fix spelling in comments. |
| * testsuite/gas/arm/vfp1.s: Fix spelling in comments. |
| * testsuite/gas/arm/vfp1_t2.s: Fix spelling in comments. |
| * testsuite/gas/arm/vfp1xD.s: Fix spelling in comments. |
| * testsuite/gas/arm/vfp1xD_t2.s: Fix spelling in comments. |
| * testsuite/gas/mcore/allinsn.s: Fix spelling in comments. |
| * testsuite/gas/mips/24k-triple-stores-5.s: Fix spelling in comments. |
| * testsuite/gas/mips/delay.d: Fix spelling in comments. |
| * testsuite/gas/mips/nodelay.d: Fix spelling in comments. |
| * testsuite/gas/mips/r5900-full.s: Fix spelling in comments. |
| * testsuite/gas/mips/r5900.s: Fix spelling in comments. |
| |
| 2016-11-27 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> |
| |
| * as.h: Fix spelling in comments. |
| * config/obj-ecoff.c: Fix spelling in comments. |
| * config/obj-macho.c: Fix spelling in comments. |
| * config/tc-aarch64.c: Fix spelling in comments. |
| * config/tc-arc.c: Fix spelling in comments. |
| * config/tc-arm.c: Fix spelling in comments. |
| * config/tc-avr.c: Fix spelling in comments. |
| * config/tc-cr16.c: Fix spelling in comments. |
| * config/tc-epiphany.c: Fix spelling in comments. |
| * config/tc-frv.c: Fix spelling in comments. |
| * config/tc-hppa.c: Fix spelling in comments. |
| * config/tc-hppa.h: Fix spelling in comments. |
| * config/tc-i370.c: Fix spelling in comments. |
| * config/tc-m68hc11.c: Fix spelling in comments. |
| * config/tc-m68k.c: Fix spelling in comments. |
| * config/tc-mcore.c: Fix spelling in comments. |
| * config/tc-mep.c: Fix spelling in comments. |
| * config/tc-metag.c: Fix spelling in comments. |
| * config/tc-mips.c: Fix spelling in comments. |
| * config/tc-mn10200.c: Fix spelling in comments. |
| * config/tc-mn10300.c: Fix spelling in comments. |
| * config/tc-nds32.c: Fix spelling in comments. |
| * config/tc-nios2.c: Fix spelling in comments. |
| * config/tc-ns32k.c: Fix spelling in comments. |
| * config/tc-pdp11.c: Fix spelling in comments. |
| * config/tc-ppc.c: Fix spelling in comments. |
| * config/tc-riscv.c: Fix spelling in comments. |
| * config/tc-rx.c: Fix spelling in comments. |
| * config/tc-score.c: Fix spelling in comments. |
| * config/tc-score7.c: Fix spelling in comments. |
| * config/tc-sparc.c: Fix spelling in comments. |
| * config/tc-tic54x.c: Fix spelling in comments. |
| * config/tc-vax.c: Fix spelling in comments. |
| * config/tc-xgate.h: Fix spelling in comments. |
| * config/tc-xtensa.c: Fix spelling in comments. |
| * config/tc-z80.c: Fix spelling in comments. |
| * dwarf2dbg.c: Fix spelling in comments. |
| * input-file.h: Fix spelling in comments. |
| * itbl-ops.c: Fix spelling in comments. |
| * read.c: Fix spelling in comments. |
| * stabs.c: Fix spelling in comments. |
| * symbols.c: Fix spelling in comments. |
| * write.c: Fix spelling in comments. |
| * testsuite/gas/all/itbl-test.c: Fix spelling in comments. |
| * testsuite/gas/tic4x/opclasses.h: Fix spelling in comments. |
| |
| 2016-11-25 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (sparc_ip): Avoid emitting a cbcond error |
| messages for non-cbcond instructions. |
| * testsuite/gas/sparc/cbcond-diag.s: New file. |
| * testsuite/gas/sparc/cbcond-diag.l: Likewise. |
| * testsuite/gas/sparc/sparc.exp (gas_64_check): Run cbcond-diag tests. |
| |
| 2016-11-23 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/sparc/sparc.exp (gas_64_check): Make sure the |
| hwcaps-bump test is run with 64-bit objects. |
| |
| 2016-11-23 Kuan-Lin Chen <kuanlinchentw@gmail.com> |
| |
| * config/tc-riscv.c: Add missing break. |
| |
| 2016-11-23 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c: Move HWS_* and HWS2_* definitions to |
| opcodes/sparc-opc.c. |
| (sparc_arch): Clarify the new role of the hwcap_allowed and |
| hwcap2_allowed fields. |
| (sparc_arch_table): Remove HWS_* and HWS2_* instances from |
| hwcap_allowed and hwcap2_allowed respectively. |
| (md_parse_option): Include the opcode arch hwcaps when processing |
| -A. |
| (sparc_ip): Use the current opcode arch hwcaps to update |
| hwcap_allowed, as well as the hwcaps of the instruction triggering |
| the bump. |
| * testsuite/gas/sparc/hwcaps-bump.s: New file. |
| * testsuite/gas/sparc/hwcaps-bump.l: Likewise. |
| * testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in |
| hwcaps-bump. |
| |
| 2016-11-22 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/b.d: Update test result. |
| |
| 2016-11-22 Alan Modra <amodra@gmail.com> |
| |
| PR 20744 |
| * config/tc-ppc.c: Delete VLE insn defines. |
| (md_assemble): Swap use_a_reloc and use_d_reloc. |
| * testsuite/gas/ppc/vle-reloc.d: Update. |
| |
| 2016-11-21 Renlin Li <renlin.li@arm.com> |
| |
| PR gas/20827 |
| * config/tc-arm.c (encode_arm_shift): Don't assert for operands not |
| presented. |
| * testsuite/gas/arm/add-shift-two.d: New. |
| * testsuite/gas/arm/add-shift-two.s: New. |
| |
| 2016-11-21 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Invoke ACX_PROG_CMP_IGNORE_INITIAL. |
| * Makefile.am (comparison): Rewrite using do_compare. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2016-11-18 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/cl-warn.s: New file. |
| * testsuite/gas/arc/cpu-pseudop-1.d: Likewise. |
| * testsuite/gas/arc/cpu-pseudop-1.s: Likewise. |
| * testsuite/gas/arc/cpu-pseudop-2.d: Likewise. |
| * testsuite/gas/arc/cpu-pseudop-2.s: Likewise. |
| * testsuite/gas/arc/cpu-warn2.s: Likewise. |
| * config/tc-arc.c (selected_cpu): Initialize. |
| (feature_type): New struct. |
| (feature_list): New variable. |
| (arc_check_feature): New function. |
| (arc_select_cpu): Check for .cpu duplicates. Don't overwrite the |
| current cpu features. Check if a feature is available for a given |
| cpu. |
| (md_parse_option): Test if features are available for a given cpu. |
| |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*. |
| * testsuite/gas/aarch64/advsimd-armv8_3.d: New. |
| * testsuite/gas/aarch64/advsimd-armv8_3.s: New. |
| * testsuite/gas/aarch64/illegal-fcmla.s: New. |
| * testsuite/gas/aarch64/illegal-fcmla.l: New. |
| * testsuite/gas/aarch64/illegal-fcmla.d: New. |
| |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Add ldaprb, ldaprh, ldapr tests. |
| * testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Likewise. |
| * testsuite/gas/aarch64/illegal-ldapr.s: Likewise. |
| * testsuite/gas/aarch64/illegal-ldapr.d: Likewise. |
| * testsuite/gas/aarch64/illegal-ldapr.l: Likewise. |
| |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * testsuite/gas/aarch64/fp-armv8_3.s: Add fjcvtzs test. |
| * testsuite/gas/aarch64/fp-armv8_3.d: Likewise. |
| * testsuite/gas/aarch64/illegal-fjcvtzs.s: Likewise. |
| * testsuite/gas/aarch64/illegal-fjcvtzs.d: Likewise. |
| * testsuite/gas/aarch64/illegal-fjcvtzs.l: Likewise. |
| * testsuite/gas/aarch64/illegal-nofp-armv8_3.s: Likewise. |
| * testsuite/gas/aarch64/illegal-nofp-armv8_3.d: Likewise. |
| * testsuite/gas/aarch64/illegal-nofp-armv8_3.l: Likewise. |
| |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. |
| (fix_insn): Likewise. |
| (warn_unpredictable_ldst): Handle ldst_imm10. |
| * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. |
| * testsuite/gas/aarch64/pac.d: Likewise. |
| * testsuite/gas/aarch64/illegal-ldraa.s: New. |
| * testsuite/gas/aarch64/illegal-ldraa.l: New. |
| * testsuite/gas/aarch64/illegal-ldraa.d: New. |
| |
| 2016-11-15 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20803 |
| * config/tc-sparc.c (cons_fix_new_sparc): Use unaligned relocs in |
| the .eh_frame section. |
| |
| 2016-11-13 Anthony Green <green@moxielogic.org> |
| |
| * config/tc-moxie.c (md_assemble): Assemble 'bad' opcode. |
| |
| 2016-11-11 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20732 |
| * expr.c (integer_constant): If tc_allow_L_suffix is defined and |
| non-zero then accept a L or LL suffix. |
| * testsuite/gas/sparc/pr20732.d: New test source file. |
| * testsuite/gas/sparc/pr20732.d: New test output file. |
| * testsuite/gas/sparc/sparc.exp: Run new test. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * testsuite/gas/aarch64/pac.s: Add ARMv8.3 branch instruction tests. |
| * testsuite/gas/aarch64/pac.d: Likewise. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (process_omitted_operand): Handle AARCH64_OPND_Rm_SP. |
| (parse_operands): Likewise. |
| * testsuite/gas/aarch64/pac.s: Add pacga. |
| * testsuite/gas/aarch64/pac.d: Add pacga. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * testsuite/gas/aarch64/pac.s: New. |
| * testsuite/gas/aarch64/pac.d: New. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * testsuite/gas/aarch64/sysreg-3.s: New. |
| * testsuite/gas/aarch64/sysreg-3.d: New. |
| * testsuite/gas/aarch64/illegal-sysreg-3.l: New. |
| * testsuite/gas/aarch64/illegal-sysreg-3.d: New. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * testsuite/gas/aarch64/system-3.s: New. |
| * testsuite/gas/aarch64/system-3.d: New. |
| * testsuite/gas/aarch64/system.d: Update expected output. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a". |
| * doc/c-aarch64.texi (-march): Likewise. |
| |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_features): Fix "simd" and "crypto". |
| * testsuite/gas/aarch64/illegal-crypto-nofp.d: New. |
| * testsuite/gas/aarch64/illegal-crypto-nofp.l: New. |
| * testsuite/gas/aarch64/illegal-fp16-nofp.d: New. |
| * testsuite/gas/aarch64/illegal-fp16-nofp.l: New. |
| * testsuite/gas/aarch64/illegal-fp16-nofp.s: New. |
| |
| 2016-11-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/20799 |
| * testsuite/gas/i386/opcode.s: Add a test for EVEX vpextrw. |
| * testsuite/gas/i386/opcode-intel.d: Updated. |
| * testsuite/gas/i386/opcode-suffix.d: Likewise. |
| * testsuite/gas/i386/opcode.d: Likewise. |
| * testsuite/gas/i386/x86-64-avx512bw-opts.s: Remove vpextrw |
| tests. |
| * testsuite/gas/i386/x86-64-avx512bw-opts-intel.d: Updated. |
| * testsuite/gas/i386/x86-64-avx512bw-opts.d: Likewise. |
| |
| 2016-11-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/20754 |
| * testsuite/gas/i386/opcode-suffix.d: Updated. |
| |
| 2016-11-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/20775 |
| * testsuite/gas/i386/i386.exp: Run fpu-bad. |
| * testsuite/gas/i386/fpu-bad.d: New file. |
| * testsuite/gas/i386/fpu-bad.s: Likewise. |
| |
| 2016-11-04 Nathan Sidwell <nathan@acm.org> |
| |
| gas/ |
| * input-scrub.c (partial_size): Make size_t. |
| (buffer_length): Likewise. Adjust meaning. |
| (struct input_save): Adjust partial_size type. |
| (input_scrub_reinit): New. |
| (input_scrub_push, input_scrub_begin): Use it. |
| (input_scrub_next_buffer): Fix buffer extension logic. Only scan |
| newly read buffer for newline. |
| |
| 2016-11-04 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (find_opcode_match): Use insert function to |
| validate matching address type operands. |
| * testsuite/gas/arc/nps400-10.d: New file. |
| * testsuite/gas/arc/nps400-10.s: New file. |
| |
| 2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (cortex-m33): Declare new processor. |
| * doc/c-arm.texi (-mcpu ARM command line option): Document new |
| Cortex-M33 processor. |
| * NEWS: Mention ARM Cortex-M33 support. |
| |
| 2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (cortex-m23): Declare new processor. |
| * doc/c-arm.texi (-mcpu ARM command line option): Document new |
| Cortex-M23 processor. |
| * NEWS: Mention ARM Cortex-M23 support. |
| |
| 2016-11-04 Palmer Dabbelt <palmer@dabbelt.com> |
| Andrew Waterman <andrew@sifive.com> |
| |
| * Makefile.am (CPU_DOCS): Add c-riscv.texi. |
| * Makefile.in: Regenerate. |
| * doc/all.texi: Set RISCV. |
| * doc/as.texinfo: Add RISCV options. |
| Add RISC-V-Dependent node. |
| Include c-riscv.texi. |
| * doc/c-riscv.texi: Rename RISC-V Options to RISC-V-Opts. |
| |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-6.s: Change ldbit tests so that limm |
| operands are out of the range of an s9, in order to fix the test. |
| * testsuite/gas/arc/nps400-6.d: Updated to match new expected output. |
| |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> |
| |
| * testsuite/gas/arc/nps-400-9.d: Added. |
| * testsuite/gas/arc/nps-400-9.s: Added. |
| |
| 2016-11-03 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (struct arc_insn): Change type of insn field. |
| (md_number_to_chars_midend): Support 6- and 8-byte values. |
| (emit_insn0): Update debug output. |
| (find_opcode_match): Likewise. |
| (build_fake_opcode_hash_entry): Delete. |
| (find_special_case_long_opcode): Delete. |
| (find_special_case): Remove long format special case handling. |
| (insert_operand): Change instruction type and update debug print |
| format. |
| (assemble_insn): Change instruction type, update debug print |
| formats, and remove unneeded assert. |
| |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> |
| |
| * config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with |
| arc_opcode_len. |
| |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> |
| |
| * config/tc-arc.c (struct arc_insn): Replace short_insn flag with |
| len field. |
| (apply_fixups): Update to use len field. |
| (emit_insn0): Simplify code, making use of len field. |
| (md_convert_frag): Update to use len field. |
| (assemble_insn): Update to use len field. |
| |
| 2016-11-03 Siddhesh Poyarekar <siddhesh.poyarekar@linaro.org> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add falkor. |
| * config/tc-arm.c (arm_cpus): Likewise. |
| * doc/c-aarch64.texi: Likewise. |
| * doc/c-arm.texi: Likewise. |
| |
| 2016-11-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/20754 |
| * testsuite/gas/i386/opcode.s: Add tests for opcode 0x82. |
| * testsuite/gas/i386/opcode-intel.d: Updated. |
| * testsuite/gas/i386/opcode.d: Likewise. |
| |
| 2016-11-02 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (SBIT_SHIFT): New. |
| (T2_SBIT_SHIFT): Likewise. |
| (t32_insn_ok): Return TRUE for MOV in ARMv8-M Baseline. |
| (md_apply_fix): Try UINT16 encoding when ARM/Thumb modified immediate |
| encoding failed. |
| * testsuite/gas/arm/archv6t2-bad.s: New error case. |
| * testsuite/gas/arm/archv6t2-bad.l: New error match. |
| * testsuite/gas/arm/archv6t2.s: New testcase. |
| * testsuite/gas/arm/archv6t2.d: New expected result. |
| * testsuite/gas/arm/archv8m.s: New testcase. |
| * testsuite/gas/arm/archv8m-base.d: New expected result. |
| * testsuite/gas/arm/archv8m-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise. |
| |
| 2016-11-02 Igor Tsimbalist <igor.v.tsimbalist@intel.com> |
| |
| * config/tc-i386.c: (cpu_arch) Add .avx512_4vnniw. |
| (cpu_noarch): Add noavx512_4vnniw. |
| * doc/c-i386.texi: Document avx512_4vnniw, noavx512_4vnniw. |
| * testsuite/gas/i386/i386.exp: Run AVX512_4VNNIW tests. |
| * testsuite/gas/i386/avx512_4vnniwd_vl-intel.d: New test. |
| * testsuite/gas/i386/avx512_4vnniwd_vl.d: Ditto. |
| * testsuite/gas/i386/avx512_4vnniwd_vl.s: Ditto. |
| * testsuite/gas/i386/avx512_4vnniwd-intel.d: Ditto. |
| * testsuite/gas/i386/avx512_4vnniwd.d: Ditto. |
| * testsuite/gas/i386/avx512_4vnniwd.s: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl-intel.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.s: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4vnniwd-intel.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4vnniwd.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4vnniwd.s: Ditto. |
| |
| 2016-11-02 Igor Tsimbalist <igor.v.tsimbalist@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512_4fmaps. |
| (cpu_noarch): Add noavx512_4fmaps. |
| (process_operands): Handle implicit quad group. |
| * doc/c-i386.texi: Document avx512_4fmaps, noavx512_4fmaps. |
| * testsuite/gas/i386/i386.exp: Add AVX512_4FMAPS tests. |
| * testsuite/gas/i386/avx512_4fmaps_vl-intel.d: New test. |
| * testsuite/gas/i386/avx512_4fmaps_vl.d: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps_vl.s: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps-intel.d: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps.d: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps.s: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps-warn.l: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps-warn.s: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps_vl-warn.l: Ditto. |
| * testsuite/gas/i386/avx512_4fmaps_vl-warn.s: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-intel.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps_vl.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps_vl.s: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps-intel.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps.d: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps.s: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps-warn.l: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps-warn.s: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.l: Ditto. |
| * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.s: Ditto. |
| |
| 2016-11-01 Palmer Dabbelt <palmer@dabbelt.com> |
| Andrew Waterman <andrew@sifive.com> |
| |
| Add support for RISC-V architecture. |
| * Makefile.am: Add riscv files. |
| * Makefile.in: Regenerate. |
| * NEWS: Mention the support for this architecture. |
| * configure.in: Define a default architecture. |
| * configure: Regenerate. |
| * configure.tgt: Add entries for riscv. |
| * doc/as.texinfo: Likewise. |
| * testsuite/gas/all/gas.exp: Expect the redef tests to fail. |
| * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. |
| * config/tc-riscv.c: New file. |
| * config/tc-riscv.h: New file. |
| * doc/c-riscv.texi: New file. |
| * testsuite/gas/riscv: New directory. |
| * testsuite/gas/riscv/riscv.exp: New file. |
| * testsuite/gas/riscv/t_insns.d: New file. |
| * testsuite/gas/riscv/t_insns.s: New file. |
| |
| 2016-10-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_target): Delete. |
| (arc_target_name): Delete. |
| (arc_features): Delete. |
| (arc_mach_type): Delete. |
| (mach_type_specified_p): Delete. |
| (enum mach_selection_type): New enum. |
| (mach_selection_mode): New static global. |
| (selected_cpu): New static global. |
| (arc_eflag): Rename to ... |
| (arc_initial_eflag): ...this, and make const. |
| (arc_select_cpu): Update comment, new parameter, check how |
| previous machine type selection was made, and record this |
| selection. Use selected_cpu instead of old globals. |
| (arc_option): Remove use of arc_get_mach, instead use |
| arc_select_cpu to validate machine type selection. Use |
| selected_cpu over old globals. |
| (allocate_tok): Use selected_cpu over old globals. |
| (find_opcode_match): Likewise. |
| (assemble_tokens): Likewise. |
| (arc_cons_fix_new): Likewise. |
| (arc_extinsn): Likewise. |
| (arc_extcorereg): Likewise. |
| (md_begin): Update default machine type selection, use |
| selected_cpu over old globals. |
| (md_parse_option): Update machine type selection option handling, |
| use selected_cpu over old globals. |
| * testsuite/gas/arc/nps400-0.s: Add .cpu directive. |
| |
| 2016-10-26 Alan Modra <amodra@gmail.com> |
| |
| Revert 2016-10-06 Alan Modra <amodra@gmail.com> |
| * config/rl78-parse.y: Do use old %name-prefix syntax. |
| * config/rx-parse.y: Likewise. |
| |
| 2016-10-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Remove .pcommit. |
| * doc/c-i386.texi: Likewise. |
| * testsuite/gas/i386/i386.exp: Remove pcommit tests. |
| * testsuite/gas/i386/pcommit-intel.d: Removed. |
| * testsuite/gas/i386/pcommit.d: Likewise. |
| * testsuite/gas/i386/pcommit.s: Likewise. |
| * testsuite/gas/i386/x86-64-pcommit-intel.d: Likewise. |
| * testsuite/gas/i386/x86-64-pcommit.d: Likewise. |
| * testsuite/gas/i386/x86-64-pcommit.s: Likewise. |
| |
| 2016-10-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutis/20705 |
| * testsuite/gas/i386/i386.exp: Run x86-64-opcode-bad. |
| * testsuite/gas/i386/x86-64-opcode-bad.d: New file. |
| * testsuite/gas/i386/x86-64-opcode-bad.s: Likewise. |
| |
| 2016-10-19 Renlin Li <renlin.li@arm.com> |
| |
| * config/tc-arm.c (encode_arm_shift): Generate unpredictable warning |
| for register-shifted register instructions. |
| * testsuite/gas/arm/shift-bad-pc.d: New. |
| * testsuite/gas/arm/shift-bad-pc.l: New. |
| * testsuite/gas/arm/shift-bad-pc.s: New. |
| |
| 2016-10-17 Cupertino Miranda <cmiranda@synopsys.com> |
| |
| * testsuite/arc/dis-inv.d: Fixed matching. |
| |
| 2016-10-17 Cupertino Miranda <cmiranda@synopsys.com> |
| |
| * testsuite/arc/dis-inv.s: Test to validate patch. |
| * testsuite/arc/dis-inv.d: Likewise. |
| |
| 2016-10-14 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/shortlimm_a7.d: New file. |
| * testsuite/gas/arc/shortlimm_a7.s: Likewise. |
| * testsuite/gas/arc/shortlimm_hs.d: Likewise. |
| * testsuite/gas/arc/shortlimm_hs.s: Likewise. |
| |
| 2016-10-11 Nick Clifton <nickc@redhat.com> |
| |
| * gas/arm/tls.d: Adjust output to match change in objdump. |
| |
| 2016-10-11 Jiong Wang <jiong.wang@arm.com> |
| |
| PR target/20666 |
| * testsuite/gas/aarch64/alias-2.d: Update expected results. |
| |
| 2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com> |
| |
| * testsuite/gas/cfi/cfi-common-1.d: Adjust regexps for mips64. |
| * testsuite/gas/cfi/cfi-common-2.d: Likewise. |
| * testsuite/gas/cfi/cfi-common-3.d: Likewise. |
| * testsuite/gas/cfi/cfi-common-4.d: Likewise. |
| * testsuite/gas/cfi/cfi-common-5.d: Likewise. |
| * testsuite/gas/cfi/cfi-common-7.d: Likewise. |
| * testsuite/gas/cfi/cfi-common-8.d: Likewise. |
| * testsuite/gas/cfi/cfi-common-9.d: Likewise. |
| * testsuite/gas/cfi/cfi-mips-1.d: Likewise. |
| |
| 2016-10-08 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.am (EXTRA_as_new_SOURCES): Add config/rl78-parse.y and |
| config/rx-parse.y. Move config/bfin-parse.y. |
| (bfin-parse.@OBJEXT@, rl78-parse.@OBJEXT@, rx-parse.@OBJEXT@): Delete. |
| ($(srcdir)/config/rl78-defs.h): New rule. |
| * Makefile.in: Regenerate. |
| |
| 2016-10-07 Jiong Wang <jiong.wang@arm.com> |
| |
| PR target/20667 |
| * testsuite/gas/aarch64/sys-rt-reg.s: Test source for instructions using |
| SYS_Rt reg. |
| * testsuite/gas/aarch64/sys-rt-reg.d: New testcase. |
| |
| 2016-10-06 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/leave_enter.d: New file. |
| * testsuite/gas/arc/leave_enter.s: Likewise. |
| * testsuite/gas/arc/regnames.d: Likewise. |
| * testsuite/gas/arc/regnames.s: Likewise. |
| * config/tc-arc.c (arc_parse_name): Don't match reg names against |
| confirmed symbol names. |
| |
| 2016-10-06 Alan Modra <amodra@gmail.com> |
| |
| * app.c (do_scrub_chars): Move fall through comment. |
| * expr.c (operand): Likewise. |
| |
| 2016-10-06 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| PR gas/20648 |
| * dw2gencfi.c (dot_cfi_sections): Refine the check for |
| inconsistent .cfi_sections to only consider compact vs non |
| compact forms. |
| * testsuite/gas/cfi/cfi-common-9.d: New file. |
| * testsuite/gas/cfi/cfi-common-9.s: New file. |
| * testsuite/gas/cfi/cfi.exp: Run new test. |
| |
| 2016-10-06 Alan Modra <amodra@gmail.com> |
| |
| * app.c: Add missing fall through comments. |
| * dw2gencfi.c: Likewise. |
| * expr.c: Likewise. |
| * config/tc-alpha.c: Likewise. |
| * config/tc-arc.c: Likewise. |
| * config/tc-arm.c: Likewise. |
| * config/tc-cr16.c: Likewise. |
| * config/tc-crx.c: Likewise. |
| * config/tc-dlx.c: Likewise. |
| * config/tc-h8300.c: Likewise. |
| * config/tc-hppa.c: Likewise. |
| * config/tc-i370.c: Likewise. |
| * config/tc-i386.c: Likewise. |
| * config/tc-i960.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-m68hc11.c: Likewise. |
| * config/tc-m68k.c: Likewise. |
| * config/tc-mep.c: Likewise. |
| * config/tc-metag.c: Likewise. |
| * config/tc-microblaze.c: Likewise. |
| * config/tc-mips.c: Likewise. |
| * config/tc-ns32k.c: Likewise. |
| * config/tc-rx.c: Likewise. |
| * config/tc-score.c: Likewise. |
| * config/tc-score7.c: Likewise. |
| * config/tc-sh.c: Likewise. |
| * config/tc-tic4x.c: Likewise. |
| * config/tc-vax.c: Likewise. |
| * config/tc-xstormy16.c: Likewise. |
| * config/tc-z80.c: Likewise. |
| * config/tc-z8k.c: Likewise. |
| * config/obj-elf.c: Likewise. |
| * config/tc-i386.c: Likewise. |
| * depend.c: Spell fall through comments consistently. |
| * config/tc-arm.c: Likewise. |
| * config/tc-d10v.c: Likewise. |
| * config/tc-i960.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-m68k.c: Likewise. |
| * config/tc-mcore.c: Likewise. |
| * config/tc-mep.c: Likewise. |
| * config/tc-ns32k.c: Likewise. |
| * config/tc-visium.c: Likewise. |
| * config/tc-xstormy16.c: Likewise. |
| * config/tc-z8k.c: Likewise. |
| |
| 2016-10-06 Alan Modra <amodra@gmail.com> |
| |
| * as.h (as_assert): Add ATTRIBUTE_NORETURN. |
| |
| 2016-10-06 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-arc.c (find_opcode_match): Add missing break. |
| * config/tc-i960.c (get_cdisp): Likewise. |
| * config/tc-metag.c (parse_swap, md_apply_fix): Likewise. |
| * config/tc-mt.c (md_parse_option): Likewise. |
| * config/tc-nds32.c (nds32_apply_fix): Likewise. |
| * config/tc-hppa.c (pa_ip): Assert rather than testing last |
| condition of multiple if statements. |
| * config/tc-s390.c (s390_exp_compare): Return 0 on error. |
| * config/tc-tic4x.c (tic4x_operand_parse): Add as_bad and break |
| out of case rather than falling into next case. Formatting. |
| |
| 2016-10-06 Alan Modra <amodra@gmail.com> |
| |
| * config/rl78-parse.y: Don't use deprecated %name-prefix. |
| * config/rx-parse.y: Likewise. |
| |
| 2016-09-29 Jiong Wang <jiong.wang@arm.com> |
| |
| PR target/20553 |
| * testsuite/gas/aarch64/advsimd-fp16.s (indexed_elem): New high index |
| testcases for H and S variants. New low index testcases for D variant. |
| * testsuite/gas/aarch64/advsimd-fp16.d: Update expected results. |
| |
| 2016-09-29 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32. |
| * testsuite/gas/ppc/power8.s: Provide tbegin. operand. |
| * testsuite/gas/ppc/power9.d: Update cmprb disassembly. |
| |
| 2016-09-26 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-xtensa.c (xg_reverse_shift_count): Pass cnt_arg instead of |
| cnt_argp to concat. |
| |
| 2016-09-26 Vlad Zakharov <vzakhar@synopsys.com> |
| |
| * Makefile.in: Regenerate. |
| * configure: Likewise. |
| * doc/Makefile.in: Likewise. |
| |
| 2016-09-26 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_elf_gnu_attribute): New function. |
| (md_pseudo_table <ELF>): Handle "gnu_attribute". |
| |
| 2016-09-22 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (v7m_psrs): Remove BASEPRI_MASK MRS/MSR special |
| register and redundant basepri_max. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (print_operands): Print spaces between |
| operands. |
| * testsuite/gas/aarch64/ilp32-basic.d: Expect spaces after "," |
| in addresses. |
| * testsuite/gas/aarch64/ldst-reg-imm-post-ind.d: Likewise. |
| * testsuite/gas/aarch64/ldst-reg-imm-pre-ind.d: Likewise. |
| * testsuite/gas/aarch64/ldst-reg-pair.d: Likewise. |
| * testsuite/gas/aarch64/ldst-reg-reg-offset.d: Likewise. |
| * testsuite/gas/aarch64/ldst-reg-uns-imm.d: Likewise. |
| * testsuite/gas/aarch64/ldst-reg-unscaled-imm.d: Likewise. |
| * testsuite/gas/aarch64/reloc-insn.d: Likewise. |
| * testsuite/gas/aarch64/sve.d: Likewise. |
| * testsuite/gas/aarch64/symbol.d: Likewise. |
| * testsuite/gas/aarch64/system.d: Likewise. |
| * testsuite/gas/aarch64/tls-desc.d: Likewise. |
| * testsuite/gas/aarch64/sve-invalid.l: Expect spaces after "," |
| in suggested alternatives. |
| * testsuite/gas/aarch64/verbose-error.l: Likewise. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (output_operand_error_record): Use "must be" |
| rather than "should be" or "expected to be" in error messages. |
| (parse_operands): Likewise. |
| * testsuite/gas/aarch64/diagnostic.l: Likewise. |
| * testsuite/gas/aarch64/legacy_reg_names.l: Likewise. |
| * testsuite/gas/aarch64/sve-invalid.l: Likewise. |
| * testsuite/gas/aarch64/sve-reg-diagnostic.l: Likewise. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (opcode_lookup): Search for the end of |
| a condition name, rather than assuming that it will have exactly |
| 2 characters. |
| (parse_operands): Likewise. |
| * testsuite/gas/aarch64/alias.d: Add new condition-code comments |
| to the expected output. |
| * testsuite/gas/aarch64/beq_1.d: Likewise. |
| * testsuite/gas/aarch64/float-fp16.d: Likewise. |
| * testsuite/gas/aarch64/int-insns.d: Likewise. |
| * testsuite/gas/aarch64/no-aliases.d: Likewise. |
| * testsuite/gas/aarch64/programmer-friendly.d: Likewise. |
| * testsuite/gas/aarch64/reloc-insn.d: Likewise. |
| * testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s: |
| New test. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * testsuite/gas/aarch64/diagnostic.s, |
| testsuite/gas/aarch64/diagnostic.l: Add tests for |
| invalid uses of MUL VL and MUL in base AArch64 instructions. |
| * testsuite/gas/aarch64/sve-add.s, testsuite/gas/aarch64/sve-add.d, |
| testsuite/gas/aarch64/sve-dup.s, testsuite/gas/aarch64/sve-dup.d, |
| testsuite/gas/aarch64/sve-invalid.s, |
| testsuite/gas/aarch64/sve-invalid.d, |
| testsuite/gas/aarch64/sve-invalid.l, |
| testsuite/gas/aarch64/sve-reg-diagnostic.s, |
| testsuite/gas/aarch64/sve-reg-diagnostic.d, |
| testsuite/gas/aarch64/sve-reg-diagnostic.l, |
| testsuite/gas/aarch64/sve.s, testsuite/gas/aarch64/sve.d: New tests. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * doc/c-aarch64.texi: Document the "sve" feature. |
| * config/tc-aarch64.c (REG_TYPE_R_Z_BHSDQ_VZP): New register type. |
| (get_reg_expected_msg): Handle it. |
| (parse_operands): When parsing operands of an SVE instruction, |
| disallow immediates that match REG_TYPE_R_Z_BHSDQ_VZP. |
| (aarch64_features): Add an entry for SVE. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle the new SVE core |
| and FP register operands. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (double_precision_operand_p): New function. |
| (parse_operands): Use it to calculate the dp_p input to |
| parse_aarch64_imm_float. Handle the new SVE FP immediate operands. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle the new SVE integer |
| immediate operands. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New |
| parse_shift_modes. |
| (parse_shift): Handle SHIFTED_MUL_VL. |
| (parse_address_main): Add an imm_shift_mode parameter. |
| (parse_address, parse_sve_address): Update accordingly. |
| (parse_operands): Handle MUL VL addressing modes. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New |
| register types. |
| (get_reg_expected_msg): Handle them. |
| (aarch64_addr_reg_parse): New function, split out from |
| aarch64_reg_parse_32_64. Handle Z registers too. |
| (aarch64_reg_parse_32_64): Call it. |
| (parse_address_main): Add base_qualifier, offset_qualifier, |
| base_type and offset_type parameters. Handle SVE base and offset |
| registers. |
| (parse_address): Update call to parse_address_main. |
| (parse_sve_address): New function. |
| (parse_operands): Parse the new SVE address operands. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode. |
| (parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other |
| shift modes. Skip range tests for AARCH64_MOD_MUL. |
| (process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED. |
| (parse_operands): Likewise. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_enum_string): New function. |
| (po_enum_or_fail): New macro. |
| (parse_operands): Handle AARCH64_OPND_SVE_PATTERN and |
| AARCH64_OPND_SVE_PRFOP. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (vector_el_type): Add NT_zero and NT_merge. |
| (parse_vector_type_for_operand): Assert that the skipped character |
| is a '.'. |
| (parse_predication_for_operand): New function. |
| (parse_typed_reg): Parse /z and /m suffixes for predicate registers. |
| (vectype_to_qualifier): Handle NT_zero and NT_merge. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (NTA_HASVARWIDTH): New macro. |
| (AARCH64_REG_TYPES): Add ZN and PN. |
| (get_reg_expected_msg): Handle them. |
| (parse_vector_type_for_operand): Add a reg_type parameter. |
| Skip the width for Zn and Pn registers. |
| (parse_typed_reg): Extend vector handling to Zn and Pn. Update the |
| call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn, |
| expecting the width to be 0. |
| (parse_vector_reg_list): Restrict error about [BHSD]nn operands to |
| REG_TYPE_VN. |
| (vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH. |
| (parse_operands): Handle the new Zn and Pn operands. |
| (REGSET16): New macro, split out from... |
| (REGSET31): ...here. |
| (reg_names): Add Zn and Pn entries. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (output_operand_error_record): Handle |
| AARCH64_OPDE_UNTIED_OPERAND. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (find_best_match): Simplify, allowing an |
| instruction with all-NIL qualifiers to fail to match. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_address_main): Remove reloc and |
| accept_reg_post_index parameters. Parse relocations and register |
| post indexes unconditionally. |
| (parse_address): Remove accept_reg_post_index parameter. |
| Update call to parse_address_main. |
| (parse_address_reloc): Delete. |
| (parse_operands): Call parse_address instead of parse_address_main. |
| Update existing callers of parse_address and make them check |
| inst.reloc.type where appropriate. |
| * testsuite/gas/aarch64/diagnostic.s: Add tests for relocations |
| in ADDR_SIMPLE, SIMD_ADDR_SIMPLE, ADDR_SIMM7 and ADDR_SIMM9 addresses. |
| Also test for invalid uses of post-index register addressing. |
| * testsuite/gas/aarch64/diagnostic.l: Update accordingly. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (REG_TYPE_R_Z, REG_TYPE_R_SP): New register |
| types. |
| (get_reg_expected_msg): Handle them and REG_TYPE_R64_SP. |
| (aarch64_check_reg_type): Simplify. |
| (aarch64_reg_parse_32_64): Return the reg_entry instead of the |
| register number. Return the type as a qualifier rather than an |
| "isreg32" boolean. Remove reject_sp, reject_rz and isregzero |
| parameters. |
| (parse_shifter_operand): Update call to aarch64_parse_32_64_reg. |
| Use get_reg_expected_msg. |
| (parse_address_main): Likewise. Use aarch64_check_reg_type. |
| (po_int_reg_or_fail): Replace reject_sp and reject_rz parameters |
| with a reg_type parameter. Update call to aarch64_parse_32_64_reg. |
| Use aarch64_check_reg_type to test the result. |
| (parse_operands): Update after the above changes. Parse ADDR_SIMPLE |
| addresses normally before enforcing the syntax restrictions. |
| * testsuite/gas/aarch64/diagnostic.s: Add tests for a post-index |
| zero register and for a stack pointer index. |
| * testsuite/gas/aarch64/diagnostic.l: Update accordingly. |
| Also update existing diagnostic messages after the above changes. |
| * testsuite/gas/aarch64/illegal-lse.l: Update the error message |
| for 32-bit register bases. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_aarch64_imm_float): Remove range check. |
| (parse_operands): Check the range of 8-bit FP immediates here instead. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_aarch64_imm_float): Report a specific |
| low-severity error for registers. |
| (parse_operands): Report an invalid floating point constant for |
| if parsing an FPIMM8 fails, and if no better error has been |
| recorded. |
| * testsuite/gas/aarch64/diagnostic.s, |
| testsuite/gas/aarch64/diagnostic.l: Add tests for integer operands |
| to FMOV. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_double_precision_fmovable): Rename |
| to... |
| (can_convert_double_to_float): ...this. Accept any double-precision |
| value that converts to single precision without loss of precision. |
| (parse_aarch64_imm_float): Update accordingly. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_immediate_expression): Add a |
| reg_type parameter. |
| (parse_constant_immediate): Likewise, and update calls. |
| (parse_aarch64_imm_float): Likewise. |
| (parse_big_immediate): Likewise. |
| (po_imm_nc_or_fail): Update accordingly, passing down a new |
| imm_reg_type variable. |
| (po_imm_of_fail): Likewise. |
| (parse_operands): Likewise. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_neon_reg_list): Rename to... |
| (parse_vector_reg_list): ...this and take a register type |
| as input. |
| (parse_operands): Update accordingly. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_neon_type_for_operand): Rename to... |
| (parse_vector_type_for_operand): ...this. |
| (parse_typed_reg): Update accordingly. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (neon_type_el): Rename to... |
| (vector_type_el): ...this. |
| (parse_neon_type_for_operand): Update accordingly. |
| (parse_typed_reg): Likewise. |
| (aarch64_reg_parse): Likewise. |
| (vectype_to_qualifier): Likewise. |
| (parse_operands): Likewise. |
| (eq_neon_type_el): Likewise. Rename to... |
| (eq_vector_type_el): ...this. |
| (parse_neon_reg_list): Update accordingly. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (neon_el_type: Rename to... |
| (vector_el_type): ...this. |
| (neon_type_el): Update accordingly. |
| (parse_neon_type_for_operand): Likewise. |
| (vectype_to_qualifier): Likewise. |
| |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_neon_operand_type): Delete. |
| (parse_typed_reg): Call parse_neon_type_for_operand directly. |
| |
| 2016-09-15 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/textinsnxop.d: New file. |
| * testsuite/gas/arc/textinsnxop.s: Likewise. |
| |
| 2016-09-15 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/sparc/sparc.exp (gas_64_check): Run |
| dcti-couples-v9 only in ELF targets to avoid spurious failures in |
| sparc-aout and sparc-coff targets. |
| |
| 2016-09-14 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * testsuite/gas/ppc/power9.d <slbiag, cpabort> New tests. |
| <addex., brd, brh, brw, lwzmx, nandxor, rldixor, setbool, |
| xor3, cp_abort, copy_first, paste, paste_last, sync>: Remove tests. |
| <copy, paste.>: Update tests. |
| * testsuite/gas/ppc/power9.s: Likewise. |
| |
| 2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (sparc_ip): Print the instruction arguments |
| in "architecture mismatch" error messages. |
| |
| 2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (md_assemble): Detect and warning on |
| unpredictable DCTI couples in certain arches. |
| (dcti_couples_detect): New global. |
| (md_longopts): Add command line option -dcti-couples-detect. |
| (md_show_usage): Document -dcti-couples-detect. |
| (md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT. |
| * testsuite/gas/sparc/sparc.exp (gas_64_check): Run |
| dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests. |
| * testsuite/gas/sparc/dcti-couples.s: New file. |
| * testsuite/gas/sparc/dcti-couples-v9c.d: Likewise. |
| * testsuite/gas/sparc/dcti-couples-v8.d: Likewise. |
| * testsuite/gas/sparc/dcti-couples-v9.d: Likewise. |
| * testsuite/gas/sparc/dcti-couples-v9c.l: Likewise. |
| * testsuite/gas/sparc/dcti-couples-v8.l: Likewise. |
| * doc/as.texinfo (Overview): Document --dcti-couples-detect. |
| * doc/c-sparc.texi (Sparc-Opts): Likewise. |
| |
| 2016-09-14 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/tls-relocs2.d: New file. |
| * testsuite/gas/arc/tls-relocs2.s: Likewise. |
| * config/tc-arc.c (tokenize_arguments): Accept offsets when base |
| is used. |
| |
| 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> |
| |
| * config/tc-s390.c (s390_parse_cpu): Support alternate arch |
| strings. |
| * doc/as.texinfo: Document new arch strings. |
| * doc/c-s390.texi: Likewise. |
| |
| 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> |
| |
| * config/tc-s390.c: Set all facitily bits by default |
| |
| 2016-09-12 Patrick Steuer <steuer@linux.vnet.ibm.com> |
| |
| * testsuite/gas/s390/zarch-z196.d: Adjust testcase. |
| |
| 2016-09-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (i386_target_format): Allow PROCESSOR_IAMCU |
| for Intel MCU. |
| |
| 2016-09-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (valid_iamcu_cpu_flags): Removed. |
| (set_cpu_arch): Updated. |
| (md_parse_option): Likewise. |
| * testsuite/gas/i386/i386.exp: Run iamcu-4 and iamcu-5. Remove |
| iamcu-inval-2 and iamcu-inval-3. |
| * testsuite/gas/i386/iamcu-4.d: New file. |
| * testsuite/gas/i386/iamcu-4.s: Likewise. |
| * testsuite/gas/i386/iamcu-5.d: Likewise. |
| * testsuite/gas/i386/iamcu-5.s: Likewise. |
| * testsuite/gas/i386/iamcu-inval-2.l: Removed. |
| * testsuite/gas/i386/iamcu-inval-2.s: Likewise. |
| * testsuite/gas/i386/iamcu-inval-3.l: Likewise. |
| * testsuite/gas/i386/iamcu-inval-3.s: Likewise. |
| |
| 2016-09-07 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/tc-arm.c ((arm_cpus): Use ARM_ARCH_V8A_CRC for all |
| ARMv8-A CPUs except xgene1. |
| |
| 2016-08-31 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_assemble): Set sh_flags for VLE. Test |
| ppc_cpu rather than calling ppc_mach to determine VLE mode. |
| (ppc_frag_check, ppc_handle_align): Likewise use ppc_cpu. |
| |
| 2016-08-26 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/sparc/crypto.d: Rename invalid opcode camellia_fi |
| to camellia_fl. |
| * testsuite/gas/sparc/crypto.s: Likewise. |
| |
| 2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS, |
| PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and |
| their lowecase counterpart special registers. Write register |
| identifier in hex. |
| * testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per |
| operation, special register and then case. Use different register for |
| each operation. Add tests for new special registers. |
| * testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result |
| accordingly. |
| * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. |
| |
| 2016-08-25 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (v7m_psrs): Remove msp_s, MSP_S, psp_s and PSP_S |
| special registers. |
| * testsuite/gas/arm/archv8m-cmse-msr.s: Remove test for above special |
| registers. |
| * testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. |
| |
| 2016-08-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .ptwrite. |
| * doc/c-i386.texi: Document ptwrite and .ptwrite. |
| * testsuite/gas/i386/i386.exp: Run ptwrite, ptwrite-intel, |
| x86-64-ptwrite and x86-64-ptwrite-intel. |
| * testsuite/gas/i386/ptwrite-intel.d: New file. |
| * testsuite/gas/i386/ptwrite.d: Likewise. |
| * testsuite/gas/i386/ptwrite.s: Likewise. |
| * testsuite/gas/i386/x86-64-ptwrite-intel.d: Likewise. |
| * testsuite/gas/i386/x86-64-ptwrite.d: Likewise. |
| * testsuite/gas/i386/x86-64-ptwrite.s: Likewise. |
| |
| 2016-08-19 Tamar Christina <tamar.christina@arm.com> |
| |
| * config/tc-arm.c (do_co_reg2c): Added constraint. |
| * testsuite/gas/arm/dest-unpredictable.s: New. |
| * testsuite/gas/arm/dest-unpredictable.l: New. |
| * testsuite/gas/arm/dest-unpredictable.d: New. |
| |
| 2016-08-19 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/i386/ilp32/x86-64-unwind.d: Adjust expected |
| ordering of sections. |
| * testsuite/gas/i386/x86-64-unwind.d: Likewise. |
| * testsuite/gas/ia64/alias-ilp32.d: Likewise. |
| * testsuite/gas/ia64/alias.d: Likewise. |
| * testsuite/gas/ia64/group-1.d: Likewise. |
| * testsuite/gas/ia64/group-2.d: Likewise. |
| * testsuite/gas/ia64/secname-ilp32.d: Likewise. |
| * testsuite/gas/ia64/secname.d: Likewise. |
| * testsuite/gas/ia64/unwind-ilp32.d: Likewise. |
| * testsuite/gas/ia64/unwind.d: Likewise. |
| * testsuite/gas/ia64/xdata-ilp32.d: Likewise. |
| * testsuite/gas/ia64/xdata.d: Likewise. |
| * testsuite/gas/mmix/bspec-1.d: Likewise. |
| * testsuite/gas/mmix/bspec-2.d: Likewise. |
| * testsuite/gas/mmix/byte-1.d: Likewise. |
| * testsuite/gas/mmix/loc-1.d: Likewise. |
| * testsuite/gas/mmix/loc-2.d: Likewise. |
| * testsuite/gas/mmix/loc-3.d: Likewise. |
| * testsuite/gas/mmix/loc-4.d: Likewise. |
| * testsuite/gas/mmix/loc-5.d: Likewise. |
| * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. |
| |
| 2016-08-11 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * config/tc-aarch64.c (parse_aarch64_imm_float): Reject -0.0. |
| * testsuite/gas/aarch64/illegal.s, testsuite/gas/aarch64/illegal.l: |
| Add tests for -0.0. Add an end-of-file comment. |
| |
| 2016-08-05 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20429 |
| * config/tc-arm.c (do_vfp_nsyn_push): Check that no more than 16 |
| registers are pushed. |
| (do_vfp_nsyn_pop): Check that no more than 16 registers are |
| popped. |
| * testsuite/gas/arm/pr20429.s: New test. |
| * testsuite/gas/arm/pr20429.d: New test driver. |
| * testsuite/gas/arm/pr20429.1: Expected error output. |
| |
| PR gas/20364 |
| * config/tc-aarch64.c (s_ltorg): Change the mapping state after |
| aligning the frag. |
| (aarch64_init): Treat rs_align frags in code sections as |
| containing code, not data. |
| * testsuite/gas/aarch64/pr20364.s: New test. |
| * testsuite/gas/aarch64/pr20364.d: New test driver. |
| |
| 2016-08-04 Stefan Trleman <stefan.teleman@oracle.com> |
| |
| PR gas/20427 |
| * config/tc-sparc.c (cons_fix_new_sparc): Prevent the generation |
| of 64-bit relocation types when assembling for a 32-bit Solaris |
| target. |
| |
| 2016-07-27 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/sparc/sparc.exp: Use is_elf_format to discriminate |
| ELF targets. |
| Run natural, natural-32, pr4587, ticc-imm-reg, v8-movwr-imm, |
| pause, save-args, cbcond, cfr, crypto edge, flush, hpcvis3, ima, |
| ld_st_fsr, ldtw_sttw, ldd_std, ldx_stx, ldx_efsr, mwait, mcdper, |
| sparc5vis4, xcrypto, v9branch1 and imm-plus-rreg only in ELF |
| targets. |
| (sparc_elf_setup): Delete. |
| * testsuite/gas/sparc/save-args.d: Fix a copy-paste typo in the |
| test's #name entry. |
| |
| 2016-07-27 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag. |
| (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16) |
| (RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16) |
| (RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32) |
| (RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits. |
| (get_append_method): Also return APPEND_ADD_COMPACT for |
| microMIPS instructions. |
| (find_altered_mips16_opcode): Exclude macros from matching. |
| Factor code out... |
| (find_altered_opcode): ... to this new function. |
| (find_altered_micromips_opcode): New function. |
| (frag_branch_delay_slot_size): Likewise. |
| (append_insn): Handle microMIPS branch/jump compaction. |
| (macro_start): Likewise. |
| (relaxed_micromips_32bit_branch_length): Likewise. |
| (md_convert_frag): Likewise. |
| * testsuite/gas/mips/micromips.s: Add conditional explicit NOPs |
| for delay slot filling. |
| * testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for |
| delay slot filling. |
| * testsuite/gas/mips/micromips-size-1.s: Likewise. |
| * testsuite/gas/mips/micromips.l: Adjust line numbers. |
| * testsuite/gas/mips/micromips-warn.l: Likewise. |
| * testsuite/gas/mips/micromips-size-1.l: Likewise. |
| * testsuite/gas/mips/micromips.d: Adjust padding. |
| * testsuite/gas/mips/micromips-trap.d: Likewise. |
| * testsuite/gas/mips/micromips-insn32.d: Likewise. |
| * testsuite/gas/mips/micromips-noinsn32.d: Likewise. |
| * testsuite/gas/mips/micromips@beq.d: Update patterns for |
| branch/jump compaction. |
| * testsuite/gas/mips/micromips@bge.d: Likewise. |
| * testsuite/gas/mips/micromips@bgeu.d: Likewise. |
| * testsuite/gas/mips/micromips@blt.d: Likewise. |
| * testsuite/gas/mips/micromips@bltu.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-4.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-5.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise. |
| * testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise. |
| * testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d: |
| Likewise. |
| * testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d: |
| Likewise. |
| * testsuite/gas/mips/micromips@loc-swap.d: Likewise. |
| * testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise. |
| * testsuite/gas/mips/micromips@relax.d: Likewise. |
| * testsuite/gas/mips/micromips@relax-at.d: Likewise. |
| * testsuite/gas/mips/micromips@relax-swap3.d: Likewise. |
| * testsuite/gas/mips/branch-extern-2.d: Likewise. |
| * testsuite/gas/mips/branch-extern-4.d: Likewise. |
| * testsuite/gas/mips/branch-section-2.d: Likewise. |
| * testsuite/gas/mips/branch-section-4.d: Likewise. |
| * testsuite/gas/mips/branch-weak-2.d: Likewise. |
| * testsuite/gas/mips/branch-weak-5.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-addend.d: |
| Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: |
| Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: |
| Likewise. |
| * testsuite/gas/mips/micromips-compact.d: New test. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2016-07-27 Graham Markall <graham.markall@embecosm.com> |
| |
| * config/tc-arc.c: Add new global arc_addrtype_hash. |
| Define O_colon and O_addrtype. |
| (debug_exp): Add O_colon and O_addrtype. |
| (tokenize_arguments): Handle colon and address type |
| tokens. |
| (declare_addrtype): New function. |
| (md_begin): Initialise arc_addrtype_hash. |
| (arc_parse_name): Add lookup of address types. |
| (assemble_insn): Handle colons and address types by |
| ignoring them. |
| * testsuite/gas/arc/nps400-8.s: New file. |
| * testsuite/gas/arc/nps400-8.d: New file. |
| * testsuite/gas/arc/nps400-8.s: Add PMU instruction tests. |
| * testsuite/gas/arc/nps400-8.d: Add expected PMU |
| instruction output. |
| |
| 2016-07-26 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `insn32' flag. |
| (RELAX_MICROMIPS_INSN32): New macro. |
| (RELAX_MICROMIPS_UNCOND, RELAX_MICROMIPS_COMPACT) |
| (RELAX_MICROMIPS_LINK, RELAX_MICROMIPS_RELAX32) |
| (RELAX_MICROMIPS_TOOFAR16, RELAX_MICROMIPS_MARK_TOOFAR16) |
| (RELAX_MICROMIPS_CLEAR_TOOFAR16, RELAX_MICROMIPS_TOOFAR32) |
| (RELAX_MICROMIPS_MARK_TOOFAR32, RELAX_MICROMIPS_CLEAR_TOOFAR32): |
| Shift bits. |
| (append_insn): Record `mips_opts.insn32' with relaxed microMIPS |
| branches. |
| (relaxed_micromips_32bit_branch_length): Handle the `insn32' |
| mode. |
| (md_convert_frag): Likewise. |
| * testsuite/gas/mips/micromips-branch-relax.s: Add `insn32' |
| conditionals. |
| * testsuite/gas/mips/micromips-branch-relax.l: Update line |
| numbers accordingly. |
| * testsuite/gas/mips/micromips-branch-relax-pic.l: Likewise. |
| * testsuite/gas/mips/micromips-branch-relax-insn32.d: New test. |
| * testsuite/gas/mips/micromips-branch-relax-insn32-pic.d: New |
| test. |
| * testsuite/gas/mips/micromips-branch-relax-insn32.l: New |
| stderr output. |
| * testsuite/gas/mips/micromips-branch-relax-insn32-pic.l: New |
| stderr output. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure: Regenerated. |
| |
| 2016-07-20 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/dsp.d: New file. |
| * testsuite/gas/arc/dsp.s: Likewise. |
| * testsuite/gas/arc/fpu.d: Likewise. |
| * testsuite/gas/arc/fpu.s: Likewise. |
| * testsuite/gas/arc/ext2op.d: Add specific disassembler option. |
| * testsuite/gas/arc/ext3op.d: Likewise. |
| * testsuite/gas/arc/tdpfp.d: Likewise. |
| * testsuite/gas/arc/tfpuda.d: Likewise. |
| |
| 2016-07-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_force_relocation): Remove |
| R_MIPS_PC26_S2 and R_MIPS_PC21_S2. |
| |
| 2016-07-19 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_force_relocation, mips_fix_adjustable): |
| Adjust comments for BAL to JALX linker conversion. |
| (fix_bad_cross_mode_branch_p): Accept cross-mode BAL. |
| * testsuite/gas/mips/unaligned-branch-1.l: Update error messages |
| expected. |
| * testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise. |
| * testsuite/gas/mips/branch-local-4.d: New test. |
| * testsuite/gas/mips/branch-local-n32-4.d: New test. |
| * testsuite/gas/mips/branch-local-n64-4.d: New test. |
| * testsuite/gas/mips/branch-addend.d: New test. |
| * testsuite/gas/mips/branch-addend-n32.d: New test. |
| * testsuite/gas/mips/branch-addend-n64.d: New test. |
| * testsuite/gas/mips/branch-local-4.s: New test source. |
| * testsuite/gas/mips/branch-addend.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-19 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_force_relocation): Also retain branch |
| relocations against MIPS16 and microMIPS symbols. |
| (fix_bad_cross_mode_jump_p): New function. |
| (fix_bad_same_mode_jalx_p): Likewise. |
| (fix_bad_misaligned_jump_p): Likewise. |
| (fix_bad_cross_mode_branch_p): Likewise. |
| (fix_bad_misaligned_branch_p): Likewise. |
| (fix_validate_branch): Likewise. |
| (md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP> |
| <BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5, |
| etc. Verify the ISA mode and alignment of the jump target. |
| <BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check |
| with a call to `fix_validate_branch'. |
| <BFD_RELOC_MIPS_26_PCREL_S2>: Likewise. |
| <BFD_RELOC_16_PCREL_S2>: Likewise. |
| <BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1> |
| <BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend. |
| Verify the ISA mode and alignment of the branch target. |
| (md_convert_frag): Verify the ISA mode and alignment of resolved |
| MIPS16 branch targets. |
| * testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction |
| branch targets with `.insn'. |
| * testsuite/gas/mips/branch-misc-5.s: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-5-64.d: Update |
| accordingly. |
| * testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-relax.s: Annotate |
| non-instruction branch target with `.insn'. |
| * testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets |
| with external symbols. |
| * testsuite/gas/mips/micromips-insn32.d: Update accordingly. |
| * testsuite/gas/mips/micromips-noinsn32.d: Likewise. |
| * testsuite/gas/mips/micromips-trap.d: Likewise. |
| * testsuite/gas/mips/micromips.d: Likewise. |
| * testsuite/gas/mips/mips16.s: Annotate non-instruction branch |
| targets with `.insn'. |
| * testsuite/gas/mips/mips16.d: Update accordingly. |
| * testsuite/gas/mips/mips16-64.d: Likewise. |
| * testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction |
| branch target with `.insn'. |
| * testsuite/gas/mips/relax-swap3.s: Likewise. |
| * testsuite/gas/mips/branch-local-2.l: New list test. |
| * testsuite/gas/mips/branch-local-3.l: New list test. |
| * testsuite/gas/mips/branch-local-n32-2.l: New list test. |
| * testsuite/gas/mips/branch-local-n32-3.l: New list test. |
| * testsuite/gas/mips/branch-local-n64-2.l: New list test. |
| * testsuite/gas/mips/branch-local-n64-3.l: New list test. |
| * testsuite/gas/mips/unaligned-jump-1.l: New list test. |
| * testsuite/gas/mips/unaligned-jump-2.l: New list test. |
| * testsuite/gas/mips/unaligned-jump-3.d: New test. |
| * testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test. |
| * testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test. |
| * testsuite/gas/mips/unaligned-jump-mips16-3.d: New test. |
| * testsuite/gas/mips/unaligned-jump-micromips-1.l: New list |
| test. |
| * testsuite/gas/mips/unaligned-jump-micromips-2.l: New list |
| test. |
| * testsuite/gas/mips/unaligned-jump-micromips-3.d: New test. |
| * testsuite/gas/mips/unaligned-branch-1.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-2.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-3.d: New test. |
| * testsuite/gas/mips/unaligned-branch-r6-1.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-r6-2.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-r6-3.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-r6-4.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-r6-5.d: New test. |
| * testsuite/gas/mips/unaligned-branch-r6-6.d: New test. |
| * testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test. |
| * testsuite/gas/mips/unaligned-branch-mips16-3.d: New test. |
| * testsuite/gas/mips/unaligned-branch-micromips-1.l: New list |
| test. |
| * testsuite/gas/mips/unaligned-branch-micromips-2.l: New list |
| test. |
| * testsuite/gas/mips/unaligned-branch-micromips-3.d: New test. |
| * testsuite/gas/mips/branch-local-2.s: New test source. |
| * testsuite/gas/mips/branch-local-3.s: New test source. |
| * testsuite/gas/mips/branch-local-n32-2.s: New test source. |
| * testsuite/gas/mips/branch-local-n32-3.s: New test source. |
| * testsuite/gas/mips/branch-local-n64-2.s: New test source. |
| * testsuite/gas/mips/branch-local-n64-3.s: New test source. |
| * testsuite/gas/mips/unaligned-jump-1.s: New test source. |
| * testsuite/gas/mips/unaligned-jump-2.s: New test source. |
| * testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source. |
| * testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source. |
| * testsuite/gas/mips/unaligned-jump-micromips-1.s: New test |
| source. |
| * testsuite/gas/mips/unaligned-jump-micromips-2.s: New test |
| source. |
| * testsuite/gas/mips/unaligned-branch-1.s: New test source. |
| * testsuite/gas/mips/unaligned-branch-2.s: New test source. |
| * testsuite/gas/mips/unaligned-branch-r6-1.s: New test source. |
| * testsuite/gas/mips/unaligned-branch-r6-2.s: New test source. |
| * testsuite/gas/mips/unaligned-branch-r6-3.s: New test source. |
| * testsuite/gas/mips/unaligned-branch-r6-4.s: New test source. |
| * testsuite/gas/mips/unaligned-branch-mips16-1.s: New test |
| source. |
| * testsuite/gas/mips/unaligned-branch-mips16-2.s: New test |
| source. |
| * testsuite/gas/mips/unaligned-branch-micromips-1.s: New test |
| source. |
| * testsuite/gas/mips/unaligned-branch-micromips-2.s: New test |
| source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-nds32.c (struct nds32_pseudo_opcode): Make pseudo_val |
| unsigned int. |
| (do_pseudo_b): Adjust. |
| (do_pseudo_bal): Likewise. |
| (do_pseudo_bge): Likewise. |
| (do_pseudo_bges): Likewise. |
| (do_pseudo_bgt): Likewise. |
| (do_pseudo_bgts): Likewise. |
| (do_pseudo_ble): Likewise. |
| (do_pseudo_bles): Likewise. |
| (do_pseudo_blt): Likewise. |
| (do_pseudo_blts): Likewise. |
| (do_pseudo_br): Likewise. |
| (do_pseudo_bral): Likewise. |
| (do_pseudo_la): Likewise. |
| (do_pseudo_li): Likewise. |
| (do_pseudo_ls_bhw): Likewise. |
| (do_pseudo_ls_bhwp): Likewise. |
| (do_pseudo_ls_bhwpc): Likewise. |
| (do_pseudo_ls_bhwi): Likewise. |
| (do_pseudo_move): Likewise. |
| (do_pseudo_neg): Likewise. |
| (do_pseudo_not): Likewise. |
| (do_pseudo_pushpopm): Likewise. |
| (do_pseudo_pushpop): Likewise. |
| (do_pseudo_v3push): Likewise. |
| (do_pseudo_v3pop): Likewise. |
| (do_pseudo_pushpop_stack): Likewise. |
| (do_pseudo_push_bhwd): Likewise. |
| (do_pseudo_pop_bhwd): Likewise. |
| (do_pseudo_pusha): Likewise. |
| (do_pseudo_pushi): Likewise. |
| |
| 2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-sparc.c (struct pop_entry): Make the type of reloc |
| bfd_reloc_code_real_type. |
| |
| 2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-sparc.c (pop_table): Remove sentinel. |
| (NUM_PERC_ENTRIES): Use ARRAY_SIZE on pop_table. |
| (md_begin): Adjust. |
| |
| 2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-z8k.c (newfix): Make type of type argument |
| bfd_reloc_code_real_type. |
| (apply_fix): Likewise. |
| |
| 2016-07-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-epiphany.c: Don't include libbfd.h. |
| * config/tc-frv.c: Likewise. |
| * config/tc-ip2k.c: Likewise. |
| * config/tc-iq2000.c: Likewise. |
| * config/tc-m32c.c: Likewise. |
| * config/tc-mep.c: Likewise. |
| * config/tc-mt.c: Likewise. |
| * config/tc-nios2.c: Likewise. |
| |
| 2016-07-16 Alan Modra <amodra@gmail.com> |
| |
| * config/bfin-parse.y: Don't include libbfd.h. |
| * config/tc-bfin.c: Likewise. |
| * config/tc-rl78.c: Likewise. |
| * config/tc-rx.c: Likewise. |
| * config/tc-metag.c: Likewise. |
| (create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT. |
| * Makefile.am: Update dependencies. |
| * Makefile.in: Regenerate. |
| |
| 2016-07-14 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro. |
| (mips_force_relocation_abs): New prototype. |
| * config/tc-mips.c (mips_force_relocation_abs): New function. |
| * testsuite/gas/mips/branch-absolute.d: Adjust dump patterns. |
| * testsuite/gas/mips/mips16-branch-absolute.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: |
| Likewise. |
| * testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: |
| Likewise. |
| * testsuite/gas/mips/branch-absolute-addend.d: New test. |
| * testsuite/gas/mips/mips16-branch-absolute-addend.d: New test. |
| * testsuite/gas/mips/micromips-branch-absolute-addend.d: New |
| test. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-14 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS16_16_PCREL_S1> |
| <BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1> |
| <BFD_RELOC_MICROMIPS_16_PCREL_S1>: Keep the ISA bit in the |
| addend calculated. |
| * testsuite/gas/mips/mips16-branch-absolute.s: Set the ISA bit |
| in `bar', export `foo'. |
| * testsuite/gas/mips/mips16-branch-absolute.d: Adjust |
| accordingly. |
| * testsuite/gas/mips/mips16-branch-absolute-n32.d: Likewise. |
| * testsuite/gas/mips/mips16-branch-absolute-n64.d: Likewise. |
| * testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: |
| Likewise. |
| * testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: |
| Likewise. |
| |
| 2016-07-14 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips16-branch-absolute.d: Update patterns. |
| * testsuite/gas/mips/branch-absolute.d: New test. |
| * testsuite/gas/mips/branch-absolute-n32.d: New test. |
| * testsuite/gas/mips/branch-absolute-n64.d: New test. |
| * testsuite/gas/mips/branch-absolute-addend-n32.d: New test. |
| * testsuite/gas/mips/branch-absolute-addend-n64.d: New test. |
| * testsuite/gas/mips/mips16-branch-absolute-n32.d: New test. |
| * testsuite/gas/mips/mips16-branch-absolute-n64.d: New test. |
| * testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New |
| test. |
| * testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New |
| test. |
| * testsuite/gas/mips/micromips-branch-absolute.d: New test. |
| * testsuite/gas/mips/micromips-branch-absolute-n32.d: New test. |
| * testsuite/gas/mips/micromips-branch-absolute-n64.d: New test. |
| * testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New |
| test. |
| * testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New |
| test. |
| * testsuite/gas/mips/branch-absolute.s: New test source. |
| * testsuite/gas/mips/branch-absolute-addend.s: New test source. |
| * testsuite/gas/mips/mips16-branch-absolute-addend.s: New test |
| source. |
| * testsuite/gas/mips/micromips-branch-absolute.s: New test |
| source. |
| * testsuite/gas/mips/micromips-branch-absolute-addend.s: New |
| test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-13 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/nal-1.d: New test. |
| * testsuite/gas/mips/mipsr6@nal-1.d: New test. |
| * testsuite/gas/mips/nal-2.d: New test. |
| * testsuite/gas/mips/mipsr6@nal-2.d: New test. |
| * testsuite/gas/mips/nal.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/sparc/ldtxa.s: New file. |
| * testsuite/gas/sparc/ldtxa.d: Likewise. |
| * testsuite/gas/sparc/sparc.exp: Execute the ldtxa test. |
| |
| 2016-07-11 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (arc_reloc_op_tag): Allow complex ops for dtpoff. |
| (tc_gen_reloc): Remove passing DTPOFF base info into reloc addendum |
| as it is no longer needed. |
| |
| 2016-07-08 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (append_insn): Remove extraneous |
| `install_insn' call. |
| |
| 2016-07-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (check_qword_reg): Correct register kind |
| checked. |
| * testsuite/gas/i386/x86-64-suffix-bad.s: Add q-suffix with |
| 16-bit register cases. |
| * testsuite/gas/i386/x86-64-suffix-bad.l: Adjust expectations. |
| |
| |
| 2016-07-02 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/ecoff@ld.d: Remove test. |
| * testsuite/gas/mips/ecoff@ld-forward.d: Remove test. |
| * testsuite/gas/mips/ecoff@ld-zero-3.d: Remove test. |
| * testsuite/gas/mips/ecoff@sd.d: Remove test. |
| * testsuite/gas/mips/ecoff@sd-forward.d: Remove test. |
| * testsuite/gas/mips/beq.d: Remove a.out and ECOFF support from |
| reloc patterns. |
| * testsuite/gas/mips/mipsr6@beq.d: Likewise. |
| * testsuite/gas/mips/bge.d: Likewise. |
| * testsuite/gas/mips/mipsr6@bge.d: Likewise. |
| * testsuite/gas/mips/bgeu.d: Likewise. |
| * testsuite/gas/mips/mipsr6@bgeu.d: Likewise. |
| * testsuite/gas/mips/blt.d: Likewise. |
| * testsuite/gas/mips/mipsr6@blt.d: Likewise. |
| * testsuite/gas/mips/bltu.d: Likewise. |
| * testsuite/gas/mips/mipsr6@bltu.d: Likewise. |
| * testsuite/gas/mips/branch-likely.d: Likewise. |
| * testsuite/gas/mips/la.d: Likewise. |
| * testsuite/gas/mips/lb.d: Likewise. |
| * testsuite/gas/mips/lifloat.d: Likewise. |
| * testsuite/gas/mips/sb.d: Likewise. |
| * testsuite/gas/mips/uld.d: Likewise. |
| * testsuite/gas/mips/ulh.d: Likewise. |
| * testsuite/gas/mips/ulw.d: Likewise. |
| * testsuite/gas/mips/usd.d: Likewise. |
| * testsuite/gas/mips/ush.d: Likewise. |
| * testsuite/gas/mips/usw.d: Likewise. |
| |
| 2016-07-02 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/branch-misc-2.s: Move non |
| locally-defined-global symbol tests... |
| * testsuite/gas/mips/branch-misc-5.s: ... to this new test. |
| * testsuite/gas/mips/branch-misc-2.d: Update accordingly. |
| * testsuite/gas/mips/branch-misc-2-64.d: Likewise. |
| * testsuite/gas/mips/branch-misc-2pic.d: Likewise. |
| * testsuite/gas/mips/branch-misc-2pic-64.d: Likewise. |
| * testsuite/gas/mips/mipsr6@branch-misc-2-64.d: Likewise. |
| * testsuite/gas/mips/mipsr6@branch-misc-2pic-64.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-2.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-2-64.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-2pic.d: Likewise. |
| * testsuite/gas/mips/micromips@branch-misc-2pic-64.d: Likewise. |
| * testsuite/gas/mips/branch-misc-5.d: New test. |
| * testsuite/gas/mips/branch-misc-5pic.d: New test. |
| * testsuite/gas/mips/branch-misc-5-64.d: New test. |
| * testsuite/gas/mips/branch-misc-5pic-64.d: New test. |
| * testsuite/gas/mips/mipsr6@branch-misc-5-64.d: New test. |
| * testsuite/gas/mips/mipsr6@branch-misc-5pic-64.d: New test. |
| * testsuite/gas/mips/micromips@branch-misc-5.d: New test. |
| * testsuite/gas/mips/micromips@branch-misc-5pic.d: New test. |
| * testsuite/gas/mips/micromips@branch-misc-5-64.d: New test. |
| * testsuite/gas/mips/micromips@branch-misc-5pic-64.d: New test. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-07-02 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/beq.s: Uncomment branches to undefined |
| symbols. |
| * testsuite/gas/mips/beq.d: Update accordingly. |
| * testsuite/gas/mips/mipsr6@beq.d: Likewise. |
| * testsuite/gas/mips/micromips@beq.d: Likewise. |
| |
| 2016-07-02 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips.exp: Restrict 64-bit `branch-mips' |
| tests to NewABI targets. |
| |
| 2016-07-02 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/mips.exp: Group `branch-misc' tests |
| together. |
| |
| 2016-07-01 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (struct aarch64_option_cpu_value_table): Add |
| require field. |
| (aarch64_features): Initialize require fields. |
| (aarch64_parse_features): Handle dependencies. |
| (aarch64_feature_enable_set, aarch64_feature_disable_set): New. |
| (md_assemble): Use AARCH64_CPU_HAS_ALL_FEATURES. |
| * testsuite/gas/aarch64/illegal-nofp16.s: New. |
| * testsuite/gas/aarch64/illegal-nofp16.l: New. |
| * testsuite/gas/aarch64/illegal-nofp16.d: New. |
| |
| 2016-07-01 Nick Clifton <nickc@redhat.com> |
| |
| * macro.c (macro_expand_body): Use a buffer big enough to hold an |
| extremely large integer. |
| |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/mpx-inval-2.l: Relax for COFF targets. |
| |
| 2016-07-01 Tristan Gingold <gingold@adacore.com> |
| |
| * NEWS: Add marker for 2.27. |
| |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * tc-i386.c (i386_index_check): Add special checks for bndmk, |
| bndldx, and bndstx. |
| * testsuite/gas/i386/mpx-inval-2.s: Add %rip and %eip relative |
| as well as scaling by other than 1 tests. |
| * testsuite/gas/i386/mpx-inval-2.l: Adjust accordingly. |
| |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * tc-i386.c (md_assemble): Alter address size checking for MPX |
| instructions. |
| * testsuite/gas/i386/mpx-inval-2.s: New. |
| * testsuite/gas/i386/mpx-inval-2.l: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| PR gas/20318 |
| * config/tc-i386.c (match_template): Add char parameter, |
| consumed in Intel mode for an extra suffix check. |
| (md_assemble): New local variable mnem_suffix. |
| * testsuite/gas/i386/suffix-bad.s: New. |
| * testsuite/gas/i386/suffix-bad.l: New. |
| * testsuite/gas/i386/i386.exp: Run new test (twice). |
| |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/movz.s: New. |
| * testsuite/gas/i386/movz32.d: New. |
| * testsuite/gas/i386/movz64.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (struct _i386_insn): New field memop1_string. |
| (md_assemble): Free first memory operand string. |
| (i386_index_check): Use repprefixok to distingush xlat from |
| other (real) string ops. |
| (maybe_adjust_templates): New. |
| (i386_att_operand). Call it. Store first memory operand string. |
| * config/tc-i386-intel.c (i386_intel_operand): Likewise. |
| * testsuite/gas/i386/intel-movs.s: New. |
| * testsuite/gas/i386/intel-movs32.d: New. |
| * testsuite/gas/i386/intel-movs64.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. Invoke as for |
| 64-bits tests with "--defsym x86_64=1 --strip-local-absolute". |
| |
| 2016-06-30 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (get_append_method): Fix a comment typo. |
| |
| 2016-06-30 Matthew Fortune <Matthew.Fortune@imgtec.com> |
| Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (append_insn) <APPEND_SWAP>: Do not special |
| case MIPS16 handling. |
| * testsuite/gas/mips/branch-swap-3.d: New test. |
| * testsuite/gas/mips/branch-swap-4.d: New test. |
| * testsuite/gas/mips/mips16@branch-swap-3.d: New test. |
| * testsuite/gas/mips/mips16@branch-swap-4.d: New test. |
| * testsuite/gas/mips/micromips@branch-swap-3.d: New test. |
| * testsuite/gas/mips/micromips@branch-swap-4.d: New test. |
| * testsuite/gas/mips/branch-swap-3.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-06-30 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (append_insn): Simplify non-MIPS16 branch |
| swapping sequence. |
| |
| 2016-06-30 Maciej W. Rozycki <macro@imgtec.com> |
| |
| PR gas/20312 |
| * write.c (subsegs_finish_section): Force no section padding to |
| alignment on failed assembly, always set last frag's alignment |
| from section. |
| * testsuite/gas/all/pr20312.l: New list test. |
| * testsuite/gas/all/pr20312.s: New test source. |
| * testsuite/gas/all/gas.exp: Run the new test |
| |
| 2016-06-30 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config.in (TARGET_WITH_CPU): Undefine. |
| * configure.ac: Add --with-cpu support, and define in config.h. |
| * configure: Regenerate. |
| * config/tc-arc.c: Use TARGET_WITH_CPU to select default CPU. |
| * NEWS: Mention new configure option. |
| |
| 2016-06-30 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * testsuite/gas/arm/armv8_2+rdma.d: New. |
| |
| 2016-06-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * NEWS: Mention --enable-compressed-debug-sections=gas is the |
| default for Linux/x86 targets. |
| * configure.tgt (ac_default_compressed_debug_sections): Default |
| to yes for Linux/x86 targets. |
| |
| 2016-06-29 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * write.c: Remove "libbfd.h" inclusion. |
| |
| 2016-06-28 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the |
| `type' test. |
| |
| 2016-06-28 Alan Modra <amodra@gmail.com> |
| |
| PR gas/20247 |
| * testsuite/gas/elf/section11.s: Don't start directives in first column. |
| |
| 2016-06-28 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * testsuite/gas/aarch64/diagnostic.s, |
| testsuite/gas/aarch64/diagnostic.l: Add tests for out-of-range indices. |
| |
| 2016-06-28 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips16_reloc_p): Handle |
| BFD_RELOC_MIPS16_16_PCREL_S1. |
| (b_reloc_p): Likewise. |
| (limited_pcrel_reloc_p): Likewise. |
| (md_pcrel_from): Likewise. |
| (md_apply_fix): Likewise. |
| (tc_gen_reloc): Likewise. |
| (md_convert_frag): Likewise. |
| (mips_fix_adjustable): Update comment. |
| * testsuite/gas/mips/mips16-branch-reloc-2.d: Remove error |
| output, add dump patterns. |
| * testsuite/gas/mips/mips16-branch-reloc-3.d: Remove error |
| output, add dump patterns. |
| * testsuite/gas/mips/mips16-branch-addend-2.d: Remove error |
| output, add dump patterns. |
| * testsuite/gas/mips/mips16-branch-addend-3.d: Remove error |
| output, add dump patterns. |
| * testsuite/gas/mips/mips16-branch-absolute.d: Remove error |
| output, add dump patterns. |
| * testsuite/gas/mips/mips16-branch-reloc-2.l: Remove file. |
| * testsuite/gas/mips/mips16-branch-reloc-3.l: Remove file. |
| * testsuite/gas/mips/mips16-branch-addend-2.l: Remove file. |
| * testsuite/gas/mips/mips16-branch-addend-3.l: Remove file. |
| * testsuite/gas/mips/mips16-branch-absolute.l: Remove file. |
| * testsuite/gas/mips/mips16-branch-addend-2.s: Add padding. |
| * testsuite/gas/mips/branch-weak.s: Adjust alignment, avoid |
| implicit instruction padding, avoid MIPS16 JR->JRC conversion. |
| * testsuite/gas/mips/branch-weak-6.d: New test. |
| * testsuite/gas/mips/branch-weak-7.d: New test. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-06-27 Vineet Gupta <vgupta@synopsys.com> |
| |
| * config//tc-arc.c (tc_arc_frame_initial_instructions): Use |
| cfi_add_CFA_def_cfa to generate default CFA with offset |
| * testsuite/gas/cfi/cfi-arc-1.d: Update expected output. |
| |
| 2016-06-27 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/20247 |
| * as.h (do_not_pad_sections_to_alignment): New global variable. |
| * as.c (show_usage): Add --no-pad-sections. |
| (parse_args): Likewise. |
| * write.c (size_seg): Skip padding the end of the section if |
| requested from the command line. |
| (SUB_SEGMENT_ALIGN): Likewise. |
| * doc/as.texinfo: Document the new option. |
| * NEWS: Mention the new feature. |
| * testsuite/gas/elf/section11.s: New test. |
| * testsuite/gas/elf/section11.d: New test driver. |
| * testsuite/gas/elf/elf.exp: Run the new test. |
| |
| 2016-06-27 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-dlx.c: Include bfd/elf32-dlx.h. |
| * config/tc-dlx.h: Remove prototype of dlx_set_skip_hi16. |
| |
| 2016-06-27 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-xtensa.c (xtensa_elf_suffix): Use ARRAY_SIZE instead of a |
| sentinal element. |
| (map_suffix_reloc_to_operator): Likewise. |
| (map_operator_to_reloc): Likewise. |
| |
| 2016-06-27 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-nds32.c (md_begin): Use ARRAY_SIZE instead of a sentinal |
| element in relax_table. |
| |
| 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-aarch64.c: Make the type of reg_entry::type |
| aarch_reg_type. |
| |
| 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-bfin.c (bfin_cpus): Remove sentinal. |
| (md_parse_option): Adjust. |
| * config/tc-aarch64.c (aarch64_parse_abi): Replace use of a sentinal |
| with iteration from 0 to ARRAY_SIZE. |
| * config/tc-mcore.c (md_begin): Likewise. |
| * config/tc-visium.c (visium_parse_arch): Likewise. |
| |
| 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-tic54x.c (tic54x_set_default_include): remove argument |
| and simplify accordingly. |
| (tic54x_include): Adjust. |
| (tic54x_mlib): Likewise. |
| |
| 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-xtensa.c (xtensa_make_property_section): Remove prototype. |
| |
| 2016-06-24 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (append_insn): Use any `O_symbol' expression |
| unchanged with relaxed MIPS16 instructions. |
| (mips16_extended_frag): Adjust accordingly. Return 1 right |
| away if a relocation will be required for the symbol requested. |
| Remove dead first relaxation pass code. |
| (mips_relax_frag): Pass `sec' down to `mips16_extended_frag'. |
| (md_convert_frag): Adjust symbol value calculation. Raise an |
| error if a relocation is required for the symbol requested. |
| * testsuite/gas/mips/mips16@relax-swap3.d: Remove dump patterns, |
| add error output. |
| * testsuite/gas/mips/mips16@relax-swap3.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-relax-0.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-relax-1.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-relax-2.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-relax-3.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-0.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-1.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-2.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-3.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-4.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-5.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-6.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-7.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-addend-0.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-addend-1.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-addend-2.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-addend-3.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-absolute.d: New test. |
| * testsuite/gas/mips/mips16-branch-reloc-0.d: New test. |
| * testsuite/gas/mips/mips16-branch-reloc-1.d: New test. |
| * testsuite/gas/mips/mips16-branch-reloc-2.d: New test. |
| * testsuite/gas/mips/mips16-branch-reloc-3.d: New test. |
| * testsuite/gas/mips/mips16-branch-addend-0.d: New test. |
| * testsuite/gas/mips/mips16-branch-addend-1.d: New test. |
| * testsuite/gas/mips/mips16-branch-addend-2.d: New test. |
| * testsuite/gas/mips/mips16-branch-addend-3.d: New test. |
| * testsuite/gas/mips/mips16-branch-absolute.d: New test. |
| * testsuite/gas/mips/mips16-absolute-reloc-0.d: New test. |
| * testsuite/gas/mips/mips16-absolute-reloc-1.d: New test. |
| * testsuite/gas/mips/mips16-absolute-reloc-2.d: New test. |
| * testsuite/gas/mips/mips16-absolute-reloc-3.d: New test. |
| * testsuite/gas/mips/mips16-pcrel-reloc-2.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-reloc-3.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-reloc-6.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-reloc-7.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-addend-2.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-addend-3.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-absolute.l: New error output. |
| * testsuite/gas/mips/mips16-branch-reloc-2.l: New error output. |
| * testsuite/gas/mips/mips16-branch-reloc-3.l: New error output. |
| * testsuite/gas/mips/mips16-branch-addend-2.l: New error output. |
| * testsuite/gas/mips/mips16-branch-addend-3.l: New error output. |
| * testsuite/gas/mips/mips16-branch-absolute.l: New error output. |
| * testsuite/gas/mips/mips16-absolute-reloc-2.l: New error output. |
| * testsuite/gas/mips/mips16-absolute-reloc-3.l: New error output. |
| * testsuite/gas/mips/mips16-pcrel-relax-0.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-relax-2.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-0.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-1.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-2.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-3.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-4.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-5.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-6.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-reloc-7.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-addend-0.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-addend-1.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-addend-2.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-addend-3.s: New test source. |
| * testsuite/gas/mips/mips16-pcrel-absolute.s: New test source. |
| * testsuite/gas/mips/mips16-branch-reloc-0.s: New test source. |
| * testsuite/gas/mips/mips16-branch-reloc-1.s: New test source. |
| * testsuite/gas/mips/mips16-branch-reloc-2.s: New test source. |
| * testsuite/gas/mips/mips16-branch-reloc-3.s: New test source. |
| * testsuite/gas/mips/mips16-branch-addend-0.s: New test source. |
| * testsuite/gas/mips/mips16-branch-addend-1.s: New test source. |
| * testsuite/gas/mips/mips16-branch-addend-2.s: New test source. |
| * testsuite/gas/mips/mips16-branch-addend-3.s: New test source. |
| * testsuite/gas/mips/mips16-branch-absolute.s: New test source. |
| * testsuite/gas/mips/mips16-absolute-reloc-0.s: New test source. |
| * testsuite/gas/mips/mips16-absolute-reloc-1.s: New test source. |
| * testsuite/gas/mips/mips16-absolute-reloc-2.s: New test source. |
| * testsuite/gas/mips/mips16-absolute-reloc-3.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-06-24 Alan Modra <amodra@gmail.com> |
| |
| * configure.tgt (alpha-*-openbsd*): Use em=nbsd. |
| |
| 2016-06-23 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (b_reloc_p): New function. |
| (mips_fix_adjustable): Also keep the original microMIPS symbol |
| referred from branch relocations. |
| * testsuite/gas/mips/branch-local-1.d: New test. |
| * testsuite/gas/mips/branch-local-n32-1.d: New test. |
| * testsuite/gas/mips/branch-local-n64-1.d: New test. |
| * testsuite/gas/mips/micromips@branch-misc-4-64.d: Update |
| relocations. |
| * testsuite/gas/mips/branch-local-1.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new cases. |
| |
| 2016-06-23 Graham Markall <graham.markall@embecosm.com> |
| |
| * config/tc-arc.c (options, md_longopts, md_parse_option): Move |
| -mspfp, -mdpfp and -mfpuda out of the sections for dummy |
| options. Correct erroneous enabling of SPFP instructions when |
| using -mnps400. |
| |
| 2016-06-22 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * testsuite/gas/ppc/power9.d <brd, brh, brw, mffs, mffs., mffsce, |
| mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl, nandxor, rldixor, |
| setbool, xor3>: New tests. |
| * testsuite/gas/ppc/power9.s: Likewise. |
| |
| 2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-xtensa.c: Include elf/xtensa.h. |
| |
| 2016-06-21 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (calculate_reloc) <BFD_RELOC_HI16_S_PCREL> |
| <BFD_RELOC_LO16_PCREL>: New switch cases. |
| (md_apply_fix) <BFD_RELOC_HI16_S_PCREL, BFD_RELOC_LO16_PCREL>: |
| Move switch cases along `BFD_RELOC_MIPS_JMP'. |
| <BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2> |
| <BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2>: Handle |
| the resolved case. |
| * testsuite/gas/mips/pcrel-reloc-4.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-4-r6.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-5.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-5-r6.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-6.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-6.l: New list test. |
| * testsuite/gas/mips/pcrel-reloc-4.s: New test source. |
| * testsuite/gas/mips/pcrel-reloc-6.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-06-21 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS_18_PCREL_S3> |
| <BFD_RELOC_MIPS_19_PCREL_S2>: Avoid null pointer dereferences |
| via `fixP->fx_addsy'. |
| |
| 2016-06-21 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (md_pcrel_from) <BFD_RELOC_MIPS_18_PCREL_S3>: |
| Calculate relocation from the containing aligned doubleword. |
| (tc_gen_reloc) <BFD_RELOC_MIPS_18_PCREL_S3>: Calculate the |
| addend from the containing aligned doubleword. |
| |
| 2016-06-21 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_force_relocation): Use `file_mips_opts' |
| rather than `mips_opts' for the R6 ISA check. |
| (mips_fix_adjustable): Likewise. |
| * testsuite/gas/mips/pcrel-reloc-1.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-1-r6.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-2.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-2-r6.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-3.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-3-r6.d: New test. |
| * testsuite/gas/mips/pcrel-reloc-1.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-06-21 Graham Markall <graham.markall@embecosm.com> |
| |
| * config/tc-arc.c (check_cpu_feature, md_parse_option): |
| Add nps400 option and feature. Add check for nps400 |
| feature. Refactor existing checks to check subclass before |
| feature enablement. |
| (md_show_usage): Document flags for NPS-400 and add some other |
| undocumented flags. |
| (cpu_type): Remove nps400 CPU type entry |
| (check_zol): Remove bfd_mach_arc_nps400 case. |
| (md_show_usage): Add help on -mcpu=nps400. |
| (cpu_types): Add entry for nps400 as arc700 plus nps400 extension |
| set. |
| * doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and |
| -fpuda flags. Document -mcpu=nps400. |
| * testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change |
| expected flags to match ARC700 instead of NPS400. |
| * testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400. |
| * testsuite/gas/arc/nps-400-2.d: Likewise. |
| * testsuite/gas/arc/nps-400-3.d: Likewise. |
| * testsuite/gas/arc/nps-400-4.d: Likewise. |
| * testsuite/gas/arc/nps-400-5.d: Likewise. |
| * testsuite/gas/arc/nps-400-6.d: Likewise. |
| * testsuite/gas/arc/nps-400-7.d: Likewise. |
| * testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to |
| avoid clash with cbba instruction. |
| * testsuite/gas/arc/textinsn2op01.d: Likewise. |
| * testsuite/gas/arc/textinsn3op.d: Likewise. |
| * testsuite/gas/arc/textinsn3op.s: Likewise. |
| * testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using |
| -mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags. |
| |
| 2016-06-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * testsuite/gas/mips/r6-64-n32.d: Change the `name' tag. |
| * testsuite/gas/mips/r6-64-n64.d: Likewise. |
| |
| 2016-06-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_fix_adjustable): Update comment on jump |
| reloc conversion. |
| |
| 2016-06-20 Virendra Pathak <virendra.pathak@broadcom.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Update vulcan feature set. |
| |
| 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (hpriv_reg_table): Add registers %hmcdper, |
| %hmcddfr and %hva_mask_nz. |
| (sparc_ip): New handling of asr/privileged/hyperprivileged |
| registers, adapted to the new form of the sparc opcodes table. |
| * testsuite/gas/sparc/rdasr.s: New file. |
| * testsuite/gas/sparc/rdasr.d: Likewise. |
| * testsuite/gas/sparc/wrasr.s: Likewise. |
| * testsuite/gas/sparc/wrasr.d: Likewise. |
| * testsuite/gas/sparc/sparc.exp (sparc_elf_setup): Add rdasr and |
| wrasr tests. |
| * testsuite/gas/sparc/rdpr.d: Use -Av9m, as some privileged |
| registers require it. |
| * testsuite/gas/sparc/wrpr.s: Complete to cover all privileged |
| registers and write instruction modalities. |
| * testsuite/gas/sparc/wrpr.d: Likewise. |
| * testsuite/gas/sparc/rdhpr.s: Likewise for hyperprivileged |
| registers. |
| * testsuite/gas/sparc/rdhpr.d: Likewise. |
| * testsuite/gas/sparc/wrhpr.s: Likewise. |
| * testsuite/gas/sparc/wrhpr.d: Likewise. |
| |
| 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (sparc_arch_table): adjust the GAS |
| architectures to use the right opcode architecture. |
| (sparc_md_end): Handle v9{c,d,e,v,m}. |
| (sparc_ip): Fix some comments. |
| * testsuite/gas/sparc/ldx_efsr.d: Fix the architecture of this |
| instruction, which is v9d. |
| * testsuite/gas/sparc/mwait.s: Remove the `rd %mwait,%g1' |
| instruction from the test, as %mwait is not readable. |
| * testsuite/gas/sparc/mwait.d: Likewise. |
| * testsuite/gas/sparc/mism-1.s: Expand to check v9b and v9e |
| mismatch architecture errors. |
| * testsuite/gas/sparc/mism-2.s: New file. |
| |
| 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (priv_reg_table): Use NULL instead of the |
| empty string to mark the end of the array. |
| (hpriv_reg_table): Likewise. |
| (v9a_asr_table): Likewise. |
| (cmp_reg_entry): Handle entries with NULL names. |
| (F_POP_V9): Define. |
| (F_POP_PCREL): Likewise. |
| (F_POP_TLS_CALL): Likewise. |
| (F_POP_POSTFIX): Likewise. |
| (struct pop_entry): New type. |
| (pop_table): New variable. |
| (enum pop_entry_type): New type. |
| (struct perc_entry): Likewise. |
| (NUM_PERC_ENTRIES): Define. |
| (perc_table): New variable. |
| (cmp_perc_entry): New function. |
| (md_begin): Sort hpriv_reg_table and v9a_asr_table, and initialize |
| perc_table. |
| (sparc_ip): Handle entries with NULL names in priv_reg_table, |
| hpriv_reg_table and v9a_asr_table. Use perc_table to handle |
| %-pseudo-ops. |
| |
| 2016-06-15 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-ft32.c (md_assemble): Call dwarf2_emit_insn with the |
| instruction size. |
| * config/tc-mcore.c (md_assemble): Likewise. |
| * config/tc-mn10200.c (md_assemble): Likewise. |
| * config/tc-moxie.c (md_assemble): Likewise. |
| * config/tc-pj.c (md_apply_fix): Handle BFD_RELOC_PJ_CODE_REL32. |
| * testsuite/gas/all/gas.exp (diff1 test): Alpha sort list of |
| exception targets. Add alpha, hppa, microblaze and rl78 to list |
| of exceptions. |
| (forward): Add microblaze to list of exceptions. |
| (fwdexp): Add alpha to list of exceptions. |
| (redef2): Add arm-epoc-pe and rl78 to list of exceptions. |
| (redef3): Add rl78 and x86_64 cygwin to list of exceptions. |
| (do_930509a): Alpha sort list of exception targets. Add h8300 and |
| mn10200 to list of exceptions. |
| (align2): Expect to fail for nds32. |
| (cond): Add alpha and rl78 to list of exceptions. |
| * testsuite/gas/all/none.d: Skip for ft32 and hppa. |
| * testsuite/gas/all/string.d: Skip for tic4x. |
| * testsuite/gas/alpha/alpha.exp: Note that the alpha-linuxecoff |
| target does not support ELF. |
| * testsuite/gas/arm/blx-bl-convert.dL Skip for the nto target. |
| * testsuite/gas/cfi/cfi-alpha-2.d: All extended format names. |
| * testsuite/gas/cfi/cfi.exp: Alpha sort list of targets. Skip SH |
| tests for sh-pe and sh-rtemscoff targets. |
| * testsuite/gas/elf/elf.exp (redef): Add rl78, xgate and vax to |
| list of exceptions. |
| (type): Run the noifunc version for alpha-freebsd and visium. |
| * testsuite/gas/elf/warn-2.s: Do not expect to fail on the mcore, |
| mn10200 or moxie targets. |
| * testsuite/gas/ft32/insn.d: Update expected disassembly. |
| * testsuite/gas/i386/i386.exp (x86-64-pcrel): Skip for cygwin |
| targets. |
| * testsuite/gas/lns/lns.exp (lns-common-1): No longer skip for |
| mcore and rx targets. |
| * testsuite/gas/macros/macros.exp (dot): Add exceptions for ns32k, |
| rl78 and vax. |
| (purge): Expect to fail on the ns32k and vax. |
| * testsuite/gas/nds32/alu-2.d: Update expected disassembly. |
| * testsuite/gas/nds32/ls.d: Likewise. |
| * testsuite/gas/nds32/sys-reg.d: Likewise. |
| * testsuite/gas/nds32/usr-spe-reg.d: Likewise. |
| * testsuite/gas/pe/aligncomm-d.d: Skip for the sh. |
| * testsuite/gas/pe/section-align-3.d: Likewise. |
| * testsuite/gas/pe/section-exclude.d: Likewise. |
| * testsuite/gas/ppc/test2xcoff32.d: Pass once all the required |
| data has been seen. |
| * testsuite/gas/ppc/textalign-xcoff-001.d: Fix up regexp to allow |
| for variations in whitespace. |
| * testsuite/gas/tilepro/t_constants.d: Pass once all the required |
| data has been seen. |
| * testsuite/gas/tilepro/t_constants.s (.safe_word): New macro. |
| Installs a 32-bit value without generating warnings on 64-bit |
| hosts. |
| Use the new macro to replace the .word directives. |
| |
| 2016-06-15 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/add_s.d: New file. |
| * testsuite/gas/arc/add_s.s: New file. |
| |
| 2016-06-14 Graham Markall <graham.markall@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-6.s: Add tests of ldbit. |
| * testsuite/gas/arc/nps400-6.d: Likewise. |
| |
| 2016-06-14 Graham Markall <graham.markall@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-6.s: Add tests of hash, tr, utf8, e4by, and |
| addf. |
| * testsuite/gas/arc/nps400-6.d: Likewise. |
| |
| 2016-06-14 Graham Markall <graham.markall@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-6.s: Add tests of calcbsd, calcbxd, |
| calckey, calcxkey, mxb, imxb, addl, subl, andl, orl, xorl, andab, orab, |
| lbdsize, bdlen, csms, csma, cbba, zncv, and hofs. |
| * testsuite/gas/arc/nps400-6.d: Likewise. |
| |
| 2016-06-14 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-nds32.c (nds32_get_align): Avoid left shifting a |
| signed constant. |
| |
| 2016-06-13 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_fix_adjustable): Don't convert RELA |
| JALR relocations on R6. |
| * testsuite/gas/mips/jal-svr4pic-local.d: New test. |
| * testsuite/gas/mips/mips1@jal-svr4pic-local.d: New test. |
| * testsuite/gas/mips/r3000@jal-svr4pic-local.d: New test. |
| * testsuite/gas/mips/micromips@jal-svr4pic-local.d: New test. |
| * testsuite/gas/mips/jal-svr4pic-local-n32.d: New test. |
| * testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d: New |
| test. |
| * testsuite/gas/mips/jal-svr4pic-local-n64.d: New test. |
| * testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d: New |
| test. |
| * testsuite/gas/mips/jal-svr4pic-local.s: New test source. |
| * testsuite/gas/mips/jal-svr4pic-local-newabi.s: New test |
| source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-06-13 Virendra Pathak <virendra.pathak@broadcom.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add Broadcom Vulcan. |
| * doc/c-aarch64.texi: Document that vulcan is a valid processor |
| name. |
| |
| 2016-06-13 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c: For non-ELF based targets skip ARM feature sets |
| that are not supported. |
| |
| * config/tc-arc.c (md_apply_fix): Avoid left shifting a signed |
| constant. |
| * config/tc-cr16.c (check_range): Likewise. |
| * config/tc-nios2.c (nios2_check_overflow): Likewise. |
| |
| 2016-06-08 Renlin Li <renlin.li@arm.com> |
| |
| * config/tc-aarch64.c (print_operands): Substitute size. |
| (output_operand_error_record): Likewise. |
| |
| 2016-06-07 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR, |
| PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE, |
| PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define. |
| (ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden |
| by vle_opcodes, and that vle flag doesn't enable opcodes. Don't |
| add vle_opcodes twice. |
| (ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL. |
| |
| 2016-06-07 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras. |
| (arm_ext_ras): Renamed from arm_ext_v8_2. |
| (insns): Update for arm_ext_v8_2 renaming. |
| (arm_extensions): Add "ras". |
| * doc/c-arm.texi (ARM Options): Add an entry for "ras". |
| * testsuite/gas/arm/armv8-a+ras.d: New. |
| * testsuite/gas/arm/armv8_2-a.d: Add explicit command line |
| options. |
| |
| 2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * itbl-parse.y (yyerror): Use modern argument declaration style. |
| |
| 2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-sh.c (parse_reg): Change type of mode argument to |
| sh_arg_type. |
| (get_operand): Adjust. |
| (insert): Change type of how to bfd_reloc_code_real_type. |
| (insert4): Likewise. |
| * config/tc-sh64.c (shmedia_get_operand): Adjust. |
| (shmedia_parse_reg): Change type of mode to shmedia_arg_type. |
| |
| 2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-nds32.c (nds32_parse_option): Make the type of ptr_arg |
| const char *. |
| |
| 2016-06-03 Peter Bergner <bergner@vnet.ibm.com> |
| |
| PR binutils/20196 |
| * gas/testsuite/gas/ppc/e6500.s <lbarx, lharx, lwarx, ldarx, |
| stbcx., sthcx., stwcx., stdcx.>: Add tests. |
| * gas/testsuite/gas/ppc/e6500.d: Likewise. |
| * gas/testsuite/gas/ppc/power8.s: Likewise. |
| * gas/testsuite/gas/ppc/power8.d: Likewise. |
| * gas/testsuite/gas/ppc/power4.s <lwarx, ldarx, stwcx., |
| stdcx.>: Add tests. |
| * gas/testsuite/gas/ppc/power4.d: Likewise. |
| |
| 2016-06-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutis/18386 |
| * testsuite/gas/i386/i386.exp: Run x86-64-branch-4. |
| * testsuite/gas/i386/x86-64-branch.d: Updated. |
| * testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise. |
| * testsuite/gas/i386/x86-64-branch-4.l: New file. |
| * testsuite/gas/i386/x86-64-branch-4.s: Likewise. |
| |
| 2016-06-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add cortex-a73 entry. |
| * doc/c-aarch64.texi (-mcpu): Document cortex-a73 value. |
| |
| 2016-06-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add cortex-a73 entry. |
| * doc/c-arm.texi (-mcpu=): Document cortex-a73 value. |
| |
| 2016-06-02 Vineet Gupta <Vineet.Gupta1@synopsys.com> |
| |
| * configure.tgt: Replace -uclibc with *. |
| |
| 2016-06-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (parse_opcode_flags): New function. |
| (find_opcode_match): Move flag parsing code out to new function. |
| Ignore operands marked IGNORE. |
| (build_fake_opcode_hash_entry): New function. |
| (find_special_case_long_opcode): New function. |
| (find_special_case): Lookup long opcodes. |
| * testsuite/gas/arc/nps400-7.d: New file. |
| * testsuite/gas/arc/nps400-7.s: New file. |
| |
| 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-ns32k.c: Remove definition of input_line_pointer. |
| |
| 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-avr.c (avr_parse_cons_expression): Replace iteration to |
| sentinal with iteration to array size. |
| |
| 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/xtensa-relax.h: Move typedefs of enums to the enums |
| definition. |
| |
| 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-ns32k.c (bit_fix_new): Replace obstack-alloc with XOBNEW |
| macro. |
| |
| 2016-06-01 Graham Markall <graham.markall@embecosm.com> |
| |
| * testsuite/gas/arc/nps-400-1.s: Add rflt variants with |
| operands of types a,b,u6, 0,b,u6, and 0,b,limm. |
| * testsuite/gas/arc/nps-400-1.d: Likewise. |
| |
| 2016-05-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/20145 |
| * config/tc-i386.c (cpu_noarch): Add noavx512f, noavx512cd, |
| noavx512er, noavx512pf, noavx512dq, noavx512bw, noavx512vl, |
| noavx512ifma and noavx512vbmi. |
| * doc/c-i386.texi: Mention noavx512f, noavx512cd, noavx512er, |
| noavx512pf, noavx512dq, noavx512bw, noavx512vl, noavx512ifma |
| and noavx512vbmi. |
| * testsuite/gas/i386/i386.exp: Run noavx512-1 and noavx512-2. |
| * testsuite/gas/i386/noavx512-1.l: New file. |
| * testsuite/gas/i386/noavx512-1.s: Likewise. |
| * testsuite/gas/i386/noavx512-2.l: Likewise. |
| * testsuite/gas/i386/noavx512-2.s: Likewise. |
| |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/20145 |
| * config/tc-i386.c (cpu_arch): Add 687. |
| (cpu_noarch): Add no287, no387, no687, nosse2, nosse3, nossse3, |
| nosse4.1, nosse4.2, nosse4 and noavx2. |
| (parse_real_register): Check cpuregmmx instead of cpummx for MMX |
| register. Check cpuregxmm instead of cpusse for XMM register. |
| Check cpuregymm instead of cpuavx for YMM register. Check |
| cpuregzmm/cpuregmask instead of cpuavx512f for ZMMM/mask register. |
| * doc/c-i386.texi: Mention 687, no287, no387, no687, nosse2, |
| nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2. |
| * testsuite/gas/i386/arch-10-prefetchw.d (as): Add mmx. |
| * testsuite/gas/i386/arch-10.d (as): Likewise. |
| * testsuite/gas/i386/arch-11.s: Add ".arch .mmx". |
| * testsuite/gas/i386/i386.exp: Pass mmx to assembler for |
| arch-10-3 and arch-10-4. Run no87-3, nosse-4, nosse-5, noavx-3 |
| and noavx-4. |
| * testsuite/gas/i386/no87-3.l: New file. |
| * testsuite/gas/i386/no87-3.s: Likewise. |
| * testsuite/gas/i386/noavx-3.l: Likewise. |
| * testsuite/gas/i386/noavx-3.s: Likewise. |
| * testsuite/gas/i386/noavx-4.d: Likewise. |
| * testsuite/gas/i386/noavx-4.s: Likewise. |
| * testsuite/gas/i386/nosse-4.l: Likewise. |
| * testsuite/gas/i386/nosse-4.s: Likewise. |
| * testsuite/gas/i386/nosse-5.d: Likewise. |
| * testsuite/gas/i386/nosse-5.s: Likewise. |
| |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/20154 |
| * config/tc-i386.c (cpu_flags_match): Don't set cpuamd64 nor |
| cpuintel64. |
| (match_template): Check Intel64/AMD64 ISA. |
| |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/20154 |
| * config/tc-i386.c (intel64): New. |
| (cpu_flags_match): Set cpuamd64 and cpuintel64. |
| (md_parse_option): Set intel64 instead of cpuamd64 and |
| cpuintel64. |
| |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (cpu_flags_match): Don't clear cpu64 nor |
| cpuno64. |
| |
| 2016-05-26 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * testsuite/gas/ppc/altivec3.d <vmsumudm>: Add test. |
| * testsuite/gas/ppc/altivec3.s: Likewise. |
| * testsuite/gas/ppc/power9.d <addex[.], lwzmx, vmsumudm>: Add tests. |
| * testsuite/gas/ppc/power9.s: Likewise. |
| |
| 2016-05-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/avx512vl-2.l: Append "#pass". |
| * testsuite/gas/i386/noavx-1.l: Likewise. |
| * testsuite/gas/i386/nommx-1.l: Likewise. |
| * testsuite/gas/i386/nosse-1.l: Likewise. |
| * testsuite/gas/i386/x86-64-avx512vl-2.l: Likewise. |
| * testsuite/gas/i386/avx512vl-2.s: Append ".p2align 4". |
| * testsuite/gas/i386/noavx-1.s: Likewise. |
| * testsuite/gas/i386/nommx-1.s: Likewise. |
| * testsuite/gas/i386/nosse-1.s: Likewise. |
| * testsuite/gas/i386/x86-64-avx512vl-2.s: Likewise. |
| |
| 2016-05-26 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-metag.c (metag_handle_align): Make the type of noop |
| unsigned char. |
| |
| 2016-05-26 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-rx.c (md_convert_frag): Make the type of reloc_type |
| bfd_reloc_code_real_type. |
| |
| 2016-05-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/20140 |
| * config/tc-i386.c (cpu_flags_match): Require another match |
| for AVX512VL. |
| * testsuite/gas/i386/i386.exp: Run avx512vl-1, avx512vl-2, |
| x86-64-avx512vl-1 and x86-64-avx512vl-2. |
| * testsuite/gas/i386/avx512vl-1.l: New file. |
| * testsuite/gas/i386/avx512vl-1.s: Likewise. |
| * testsuite/gas/i386/avx512vl-2.l: Likewise. |
| * testsuite/gas/i386/avx512vl-2.s: Likewise. |
| * testsuite/gas/i386/x86-64-avx512vl-1.l: Likewise. |
| * testsuite/gas/i386/x86-64-avx512vl-1.s: Likewise. |
| * testsuite/gas/i386/x86-64-avx512vl-2.l: Likewise. |
| * testsuite/gas/i386/x86-64-avx512vl-2.s: Likewise. |
| |
| 2016-05-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/20141 |
| * testsuite/gas/i386/i386.exp: Run x86-64-pr20141. |
| * testsuite/gas/i386/x86-64-pr20141.d: New file. |
| * testsuite/gas/i386/x86-64-pr20141.s: Likewise. |
| |
| 2016-05-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (arch_entry): Remove negated. |
| (noarch_entry): New struct. |
| (cpu_arch): Updated. Remove .no87, .nommx, .nosse and .noavx. |
| (cpu_noarch): New. |
| (set_cpu_arch): Check cpu_noarch after cpu_arch. |
| (md_parse_option): Allow -march=+nosse. Check cpu_noarch after |
| cpu_arch. |
| (output_message): New function. |
| (show_arch): Use it. Handle cpu_noarch. |
| * testsuite/gas/i386/i386.exp: Run nommx-1, nommx-2, nommx-3, |
| nosse-1, nosse-2, nosse-3, noavx-1 and noavx-2. |
| * testsuite/gas/i386/noavx-1.l: New file. |
| * testsuite/gas/i386/noavx-1.s: Likewise. |
| * testsuite/gas/i386/noavx-2.s: Likewise. |
| * testsuite/gas/i386/noavx-2.l: Likewise. |
| * testsuite/gas/i386/nommx-1.s: Likewise. |
| * testsuite/gas/i386/nommx-1.l: Likewise. |
| * testsuite/gas/i386/nommx-2.s: Likewise. |
| * testsuite/gas/i386/nommx-2.l: Likewise. |
| * testsuite/gas/i386/nommx-3.s: Likewise. |
| * testsuite/gas/i386/nommx-3.l: Likewise. |
| * testsuite/gas/i386/nosse-1.s: Likewise. |
| * testsuite/gas/i386/nosse-1.l: Likewise. |
| * testsuite/gas/i386/nosse-2.s: Likewise. |
| * testsuite/gas/i386/nosse-2.l: Likewise. |
| * testsuite/gas/i386/nosse-3.s: Likewise. |
| * testsuite/gas/i386/nosse-3.l: Likewise. |
| |
| 2016-05-25 Chua Zheng Leong <chuazl@comp.nus.edu.sg> |
| |
| PR target/20067 |
| * config/tc-arm.c (move_or_literal_pool): Only generate a VMOV.I64 |
| instruction if supported by the currently selected fpu variant. |
| * testsuite/gas/arm/vfpv3-ldr_immediate.s: Add test of this PR. |
| * testsuite/gas/arm/vfpv3-ldr_immediate.d: Update expected disassembly. |
| |
| 2016-05-24 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_fix_adjustable): Also return 0 for |
| jump relocations against MIPS16 or microMIPS symbols on RELA |
| targets. |
| * testsuite/gas/mips/jalx-local.d: New test. |
| * testsuite/gas/mips/jalx-local-n32.d: New test. |
| * testsuite/gas/mips/jalx-local-n64.d: New test. |
| * testsuite/gas/mips/jalx-local.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-05-24 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (md_apply_fix) |
| <BFD_RELOC_MIPS16_TLS_TPREL_LO16>: Remove fall-through, adjust |
| code accordingly. |
| |
| 2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-xtensa.c (struct suffix_reloc_map): Change type of field |
| operator to operatorT. |
| (map_suffix_reloc_to_operator): Change return type to operatorT. |
| |
| 2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-d30v.c (find_format): Change type of X_op to operatorT. |
| |
| 2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-mmix.c (mmix_parse_predefined_name): Change type of |
| handler_charp to const char *. |
| |
| 2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-ft32.h (DEFAULT_TARGET_FORMAT): Remove. |
| (ft32_target_format): Likewise. |
| (TARGET_FORMAT): Adjust. |
| |
| 2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-ia64.c (dot_rot): simplify allocations from obstacks. |
| (ia64_frob_label): Likewise. |
| |
| 2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-cr16.c (check_range): Make type of retval op_err. |
| * config/tc-crx.c: Likewise. |
| |
| 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (md_begin): Add XY registers. |
| (cpu_types): Code density is default off for ARC EM. |
| |
| 2016-05-23 Cupertino Miranda <cmiranda@synopsys.com> |
| |
| * config/tc-arc.c (attributes_t): Renamed attribute class to |
| attr_class. |
| (find_opcode_match, assemble_insn, tokenize_extinsn): Changed. |
| |
| 2016-05-23 Kuba Sejdak <jakub.sejdak@phoesys.com> |
| |
| * configuse.tgt: Add entry for arm-phoenix. |
| |
| 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-tic54x.c (tic54x_sect): simplify string creation. |
| |
| 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-spu.c (APUOP): Use OPCODE as an unsigned constant. |
| |
| 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-tic54x.c (tic54x_mmregs): Adjust. |
| (md_begin): Likewise. |
| (encode_condition): Likewise. |
| (encode_cc3): Likewise. |
| (encode_cc2): Likewise. |
| (encode_operand): Likewise. |
| (tic54x_undefined_symbol): Likewise. |
| |
| 2016-05-20 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Update comment. Add |
| p6600 entry. |
| * doc/c-mips.texi: Document p6600 -march option. |
| |
| 2016-05-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/19600 |
| * config/tc-i386.c (md_apply_fix): Preserve addend for |
| BFD_RELOC_386_GOT32 and BFD_RELOC_X86_64_GOT32. |
| * testsuite/gas/i386/addend.d: New file. |
| * testsuite/gas/i386/addend.s: Likewise. |
| * testsuite/gas/i386/x86-64-addend.d: Likewise. |
| * testsuite/gas/i386/x86-64-addend.s: Likewise. |
| * testsuite/gas/i386/i386.exp: Run addend and x86-64-addend. |
| * testsuite/gas/i386/reloc32.d: Updated. |
| |
| 2016-05-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (append_insn): Correct the encoding of a |
| constant argument for microMIPS JALX. |
| (tc_gen_reloc): Correct the encoding of an in-place addend for |
| microMIPS JALX. |
| * testsuite/gas/mips/jalx-addend.d: New test. |
| * testsuite/gas/mips/jalx-addend-n32.d: New test. |
| * testsuite/gas/mips/jalx-addend-n64.d: New test. |
| * testsuite/gas/mips/jalx-imm.d: New test. |
| * testsuite/gas/mips/jalx-imm-n32.d: New test. |
| * testsuite/gas/mips/jalx-imm-n64.d: New test. |
| * testsuite/gas/mips/jalx-addend.s: New test source. |
| * testsuite/gas/mips/jalx-imm.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-05-20 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c: Correct tab-after-space formatting mistakes |
| throughout. |
| |
| 2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (find_opcode_match): Remove casting away of |
| const. |
| * config/tc-arc.h (struct arc_flags): Make flgp field const. |
| |
| 2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (md_pcrel_from_section): Use BFD_VMA_FMT where |
| appropriate. |
| (md_convert_frag): Likewise. |
| |
| 2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_opcode_hash_entry_iterator_next): Set |
| cached opcode to NULL when we reach a non-matching opcode. |
| * testsuite/gas/arc/asm-errors-2.d: New file. |
| * testsuite/gas/arc/asm-errors-2.err: New file. |
| * testsuite/gas/arc/asm-errors-2.s: New file. |
| |
| 2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (tokenize_arguments): Add checks for array |
| overflow. |
| * testsuite/gas/arc/asm-errors.s: Addition test line added. |
| * testsuite/gas/arc/asm-errors.err: Update expected results. |
| |
| 2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-rx.c (struct cpu_type): Change the type of a field from |
| int to enum rx_cpu_types. |
| |
| 2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-dlx.c (struct machine_it): change the type of a field from |
| int to bfd_reloc_code_real_type. |
| * config/tc-tic4x.c: Likewise. |
| |
| 2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-v850.c (v850_target_arch): change type to enum |
| bfd_architecture. |
| * config/tc-v850.h (v850_target_arch): Likewise. |
| |
| 2016-05-18 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_insert_operand): Trim PPC_OPERAND_SIGNOPT |
| allowed negative range. |
| * testsuite/gas/ppc/power9.s: Test xxspltib of -128, not -256. |
| * testsuite/gas/ppc/power9.d: Update. |
| |
| 2016-05-17 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * testsuite/gas/arm/archv8m-cmse-msr-base.d: Force Thumb when |
| disassembling and stop skipping targets. |
| * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. |
| * testsuite/gas/arm/archv8m-base.d: Also allow nops after the last |
| instruction for targets that have stronger alignment requirement. |
| * testsuite/gas/arm/archv8m-cmse-base.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise. |
| * testsuite/gas/arm/archv8m-main.d: Likewise. |
| * testsuite/gas/arm/archv8m.s: Add label. |
| * testsuite/gas/arm/archv8m-cmse.s: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-msr.s: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-main.s: Likewise. |
| |
| 2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-m32r.c (mach_table): Make static and const. |
| |
| 2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-vax.c (flonum_gen2vax): Adjust prototype to match |
| definition. |
| |
| 2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-mn10300.c (md_begin): set linkrelax here instead of |
| defining it. |
| * config/tc-msp430.c (md_begin): Likewise. |
| |
| 2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-m68hc11.c (fixup8): Change variables type from int to |
| bfd_reloc_code_real_type where appropriate. |
| (fixup16): Likewise. |
| (fixup8_xg): Likewise. |
| |
| 2016-05-15 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-sh64.c (shmedia_check_limits): Constify `msg'. |
| |
| 2016-05-13 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * testsuite/gas/ppc/power9.d <xxspltib>: Add additional operand tests. |
| * testsuite/gas/ppc/power9.s: Likewise. |
| |
| 2016-05-13 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-coff.c (weak_uniquify): Delete unused var. |
| |
| 2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * app.c (app_push): Use XNEW and related macros. |
| * as.c (parse_args): Likewise. |
| * cgen.c (make_right_shifted_expr): Likewise. |
| (gas_cgen_tc_gen_reloc): Likewise. |
| * config/bfin-defs.h: Likewise. |
| * config/bfin-parse.y: Likewise. |
| * config/obj-coff.c (stack_init): Likewise. |
| (stack_push): Likewise. |
| (coff_obj_symbol_new_hook): Likewise. |
| (coff_obj_symbol_clone_hook): Likewise. |
| (add_lineno): Likewise. |
| (coff_frob_symbol): Likewise. |
| * config/obj-elf.c (obj_elf_section_name): Likewise. |
| (build_group_lists): Likewise. |
| * config/obj-evax.c (evax_symbol_new_hook): Likewise. |
| * config/obj-macho.c (obj_mach_o_indirect_symbol): Likewise. |
| * config/tc-aarch64.c (insert_reg_alias): Likewise. |
| (find_or_make_literal_pool): Likewise. |
| (add_to_lit_pool): Likewise. |
| (fill_instruction_hash_table): Likewise. |
| * config/tc-alpha.c (load_expression): Likewise. |
| (emit_jsrjmp): Likewise. |
| (s_alpha_ent): Likewise. |
| (s_alpha_end): Likewise. |
| (s_alpha_linkage): Likewise. |
| (md_begin): Likewise. |
| (tc_gen_reloc): Likewise. |
| * config/tc-arc.c (arc_insert_opcode): Likewise. |
| (arc_extcorereg): Likewise. |
| * config/tc-bfin.c: Likewise. |
| * config/tc-cr16.c: Likewise. |
| * config/tc-cris.c: Likewise. |
| * config/tc-crx.c (preprocess_reglist): Likewise. |
| * config/tc-d10v.c: Likewise. |
| * config/tc-frv.c (frv_insert_vliw_insn): Likewise. |
| (frv_tomcat_shuffle): Likewise. |
| * config/tc-h8300.c: Likewise. |
| * config/tc-i370.c (i370_macro): Likewise. |
| * config/tc-i386.c (lex_got): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-ia64.c (alloc_record): Likewise. |
| (set_imask): Likewise. |
| (save_prologue_count): Likewise. |
| (dot_proc): Likewise. |
| (dot_endp): Likewise. |
| (ia64_frob_label): Likewise. |
| (add_qp_imply): Likewise. |
| (add_qp_mutex): Likewise. |
| (mark_resource): Likewise. |
| (dot_alias): Likewise. |
| * config/tc-m68hc11.c: Likewise. |
| * config/tc-m68k.c (m68k_frob_label): Likewise. |
| (s_save): Likewise. |
| (mri_control_label): Likewise. |
| (push_mri_control): Likewise. |
| (build_mri_control_operand): Likewise. |
| (s_mri_else): Likewise. |
| (s_mri_break): Likewise. |
| (s_mri_next): Likewise. |
| (s_mri_for): Likewise. |
| (s_mri_endw): Likewise. |
| * config/tc-metag.c (create_mnemonic_htab): Likewise. |
| * config/tc-microblaze.c: Likewise. |
| * config/tc-mmix.c (s_loc): Likewise. |
| * config/tc-nds32.c (nds32_relax_hint): Likewise. |
| * config/tc-nios2.c (nios2_insn_reloc_new): Likewise. |
| * config/tc-rl78.c: Likewise. |
| * config/tc-rx.c (rx_include): Likewise. |
| * config/tc-sh.c: Likewise. |
| * config/tc-sh64.c (shmedia_frob_section_type): Likewise. |
| * config/tc-sparc.c: Likewise. |
| * config/tc-spu.c: Likewise. |
| * config/tc-tic6x.c (static tic6x_unwind_info *tic6x_get_unwind): Likewise. |
| (tic6x_start_unwind_section): Likewise. |
| * config/tc-tilegx.c: Likewise. |
| * config/tc-tilepro.c: Likewise. |
| * config/tc-v850.c: Likewise. |
| * config/tc-visium.c: Likewise. |
| * config/tc-xgate.c: Likewise. |
| * config/tc-xtensa.c (xtensa_translate_old_userreg_ops): Likewise. |
| (new_resource_table): Likewise. |
| (resize_resource_table): Likewise. |
| (xtensa_create_trampoline_frag): Likewise. |
| (xtensa_maybe_create_literal_pool_frag): Likewise. |
| (cache_literal_section): Likewise. |
| * config/xtensa-relax.c (append_transition): Likewise. |
| (append_condition): Likewise. |
| (append_value_condition): Likewise. |
| (append_constant_value_condition): Likewise. |
| (append_literal_op): Likewise. |
| (append_label_op): Likewise. |
| (append_constant_op): Likewise. |
| (append_field_op): Likewise. |
| (append_user_fn_field_op): Likewise. |
| (enter_opname_n): Likewise. |
| (enter_opname): Likewise. |
| (split_string): Likewise. |
| (parse_insn_templ): Likewise. |
| (clone_req_or_option_list): Likewise. |
| (clone_req_option_list): Likewise. |
| (parse_option_cond): Likewise. |
| (parse_insn_pattern): Likewise. |
| (parse_insn_repl): Likewise. |
| (build_transition): Likewise. |
| (build_transition_table): Likewise. |
| * dw2gencfi.c (alloc_fde_entry): Likewise. |
| (alloc_cfi_insn_data): Likewise. |
| (cfi_add_CFA_remember_state): Likewise. |
| (dot_cfi_escape): Likewise. |
| (dot_cfi_fde_data): Likewise. |
| (select_cie_for_fde): Likewise. |
| * dwarf2dbg.c (dwarf2_directive_loc): Likewise. |
| * ecoff.c (ecoff_add_bytes): Likewise. |
| (ecoff_build_debug): Likewise. |
| * input-scrub.c (input_scrub_push): Likewise. |
| (input_scrub_begin): Likewise. |
| (input_scrub_next_buffer): Likewise. |
| * itbl-ops.c (append_insns_as_macros): Likewise. |
| (alloc_entry): Likewise. |
| (alloc_field): Likewise. |
| * listing.c (listing_newline): Likewise. |
| (listing_listing): Likewise. |
| * macro.c (get_any_string): Likewise. |
| (delete_macro): Likewise. |
| * stabs.c (generate_asm_file): Likewise. |
| (stabs_generate_asm_lineno): Likewise. |
| * subsegs.c (subseg_change): Likewise. |
| (subseg_get): Likewise. |
| * symbols.c (define_dollar_label): Likewise. |
| (symbol_relc_make_sym): Likewise. |
| * write.c (write_relocs): Likewise. |
| |
| 2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/obj-coff.c (obj_coff_def): Simplify string copying. |
| (weak_name2altname): Likewise. |
| (weak_uniquify): Likewise. |
| (obj_coff_section): Likewise. |
| (obj_coff_init_stab_section): Likewise. |
| * config/obj-elf.c (obj_elf_section_name): Likewise. |
| (obj_elf_init_stab_section): Likewise. |
| * config/obj-evax.c (evax_shorten_name): Likewise. |
| * config/obj-macho.c (obj_mach_o_make_or_get_sect): Likewise. |
| * config/tc-aarch64.c (create_register_alias): Likewise. |
| * config/tc-alpha.c (load_expression): Likewise. |
| (s_alpha_file): Likewise. |
| (s_alpha_section_name): Likewise. |
| (tc_gen_reloc): Likewise. |
| * config/tc-arc.c (md_assemble): Likewise. |
| * config/tc-arm.c (create_neon_reg_alias): Likewise. |
| (start_unwind_section): Likewise. |
| * config/tc-hppa.c (pa_build_unwind_subspace): Likewise. |
| (hppa_elf_mark_end_of_function): Likewise. |
| * config/tc-nios2.c (nios2_modify_arg): Likewise. |
| (nios2_negate_arg): Likewise. |
| * config/tc-rx.c (rx_section): Likewise. |
| * config/tc-sh64.c (sh64_consume_datalabel): Likewise. |
| * config/tc-tic30.c (tic30_find_parallel_insn): Likewise. |
| * config/tc-tic54x.c (tic54x_include): Likewise. |
| (tic54x_macro_info): Likewise. |
| (subsym_get_arg): Likewise. |
| (subsym_substitute): Likewise. |
| (tic54x_start_line_hook): Likewise. |
| * config/tc-xtensa.c (xtensa_literal_prefix): Likewise. |
| (xg_reverse_shift_count): Likewise. |
| * config/xtensa-relax.c (enter_opname_n): Likewise. |
| (split_string): Likewise. |
| * dwarf2dbg.c (get_filenum): Likewise. |
| (process_entries): Likewise. |
| * expr.c (operand): Likewise. |
| * itbl-ops.c (alloc_entry): Likewise. |
| * listing.c (listing_message): Likewise. |
| (listing_title): Likewise. |
| * macro.c (check_macro): Likewise. |
| * stabs.c (s_xstab): Likewise. |
| * symbols.c (symbol_relc_make_expr): Likewise. |
| * write.c (compress_debug): Likewise. |
| |
| 2016-05-12 Nick Clifton <nickc@redhat.com> |
| |
| PR target/20068 |
| * testsuite/gas/arm/pr20068.d: Use correct regexp syntax. |
| |
| 2016-05-11 Nick Clifton <nickc@redhat.com> |
| |
| PR target/20068 |
| * testsuite/gas/arm/pr20068.d: Adjust expected output to allow for |
| big endian ARM configurations. |
| |
| 2016-05-11 Andrew Bennett <andrew.bennett@imgtec.com> |
| Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (options): Add OPTION_DSPR3 and |
| OPTION_NO_DSPR3. |
| (md_longopts): Likewise. |
| (md_show_usage): Add help for -mdspr3 and -mno-dspr3. |
| (mips_ases): Define availability for DSPr3. |
| (mips_ase_groups): Add ASE_DSPR3 to the DSP group. |
| (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. |
| * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 |
| formatting. |
| * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and |
| .set nodspr3. Fix -mdspr2 formatting. |
| * testsuite/gas/mips/mips32-dspr3.d: New file. |
| * testsuite/gas/mips/mips32-dspr3.s: Likewise. |
| * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. |
| |
| 2016-05-11 Nick Clifton <nickc@redhat.com> |
| |
| PR target/20068 |
| * config/tc-arm.c (add_to_lit_pool): Ensure that the padding added |
| to the pool uses O_constant. |
| * testsuite/gas/arm/pr20068.s: New test. |
| * testsuite/gas/arm/pr20068.d: Test driver. |
| |
| 2016-05-11 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/arm/archv8m-cmse-base.d: Skip for non-ELF ARM targets. |
| * testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. |
| |
| 2016-05-10 Alexander Fomin <alexander.fomin@intel.com> |
| |
| * testsuite/gas/i386/i386.exp: Run RDPID tests. |
| * testsuite/gas/i386/prefix.d: Adjust. |
| * testsuite/gas/i386/rdpid.s: New test. |
| * testsuite/gas/i386/rdpid.d: Ditto. |
| * testsuite/gas/i386/rdpid-intel.d: Ditto. |
| * testsuite/gas/i386/x86-64-rdpid.s: Ditto. |
| * testsuite/gas/i386/x86-64-rdpid.d: Ditto. |
| * testsuite/gas/i386/x86-64-rdpid-intel.d: Ditto. |
| |
| 2016-05-10 Alexander Fomin <alexander.fomin@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add RDPID. |
| * doc/c-i386.texi: Document RDPID. |
| |
| 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to |
| set branch type of a symbol. |
| |
| 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * NEWS: Document ARMv8-M and ARMv8-M Security and DSP Extensions. |
| * config/tc-arm.c (arm_ext_dsp): New feature for Thumb DSP |
| instructions. |
| (arm_extensions): Add dsp extension for ARMv8-M Mainline. |
| (aeabi_set_public_attributes): Memorize the feature bits of the |
| architecture selected for Tag_CPU_arch. Use it to set |
| Tag_DSP_extension to 1 for ARMv8-M Mainline with DSP extension. |
| (arm_convert_symbolic_attribute): Define Tag_DSP_extension. |
| * testsuite/gas/arm/arch7em-bad.d: Rename to ... |
| * testsuite/gas/arm/arch7em-bad-1.d: This. |
| * testsuite/gas/arm/arch7em-bad-2.d: New file. |
| * testsuite/gas/arm/arch7em-bad-3.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. |
| * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. |
| * testsuite/gas/arm/attr-march-armv8m.main.dsp.d: Likewise. |
| |
| 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (struct arm_option_extension_value_table): Make |
| allowed_archs an array with 2 entries. |
| (ARM_EXT_OPT): Adapt to only fill the first entry of allowed_archs. |
| (ARM_EXT_OPT2): New macro filling the two entries of allowed_archs. |
| (arm_extensions): Use separate entries in allowed_archs when several |
| archs are allowed to use an extension and change ARCH_ANY in |
| ARM_ARCH_NONE in allowed_archs. |
| (arm_parse_extension): Check that, for each allowed_archs entry, all |
| bits are set in the current architecture, ignoring ARM_ANY entries. |
| (s_arm_arch_extension): Likewise. |
| |
| 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN. |
| (arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN. |
| (arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not |
| shared with a non M profile architecture. |
| (do_rn): New function. |
| (known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather |
| than arm_ext_v8m. |
| (v7m_psrs): Add ARMv8-M security extensions new special registers. |
| (insns): Add ARMv8-M Security Extensions instructions. |
| (aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of |
| arm_ext_v8m_m to decide the profile and the Thumb ISA. |
| * testsuite/gas/arm/archv8m-cmse.s: New file. |
| * testsuite/gas/arm/archv8m-cmse-main.s: Likewise.. |
| * testsuite/gas/arm/archv8m-cmse-msr.s: Likewise. |
| * testsuite/gas/arm/any-cmse.d: Likewise. |
| * testsuite/gas/arm/any-cmse-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-base.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise. |
| * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. |
| |
| 2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/sparc/sparc5vis4.s: Fix mnemonic of faligndatai. |
| * testsuite/gas/sparc/sparc5vis4.d: Likewise. |
| |
| 2016-05-04 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (fpu_arch_vfp_v1): Mark with ATTRIBUTE_UNUSED. |
| (fpu_arch_vfp_v3): Likewise. |
| (fpu_arch_neon_v1): Likewise. |
| (arm_arch_full): Likewise. |
| (parse_neon_el_struct_list): Initialize fields of firsttype. |
| |
| 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (syntaxclass): Add SYNTAX_NOP and SYNTAX_1OP. |
| (arc_extinsn): Handle new introduced syntax. |
| * testsuite/gas/arc/textinsn1op.d: New file. |
| * testsuite/gas/arc/textinsn1op.s: Likewise. |
| * doc/c-arc.texi: Document SYNTAX_NOP and SYNTAX_1OP. |
| |
| 2016-05-03 Pitchumani Sivanupandi <pitchumani.s@atmel.com> |
| |
| * testsuite/gas/lns/lns.exp: Add avr to list of targets using |
| DW_LNS_fixed_advance_pc. |
| |
| 2016-04-27 Alan Modra <amodra@gmail.com> |
| |
| * as.h (inline, __PTR_TO_INT, __INT_TO_PTR): Don't define. |
| (xmemdup0): New inline function. |
| |
| 2016-04-22 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (code_option_type): New enum. |
| (parse_code_option): Return status indicating option type. |
| (s_mipsset): Update `parse_code_option' call site accordingly. |
| Always set register sizes from the ISA with ISA overrides. |
| (s_module): Update `parse_code_option' call site. |
| * testsuite/gas/mips/isa-override-1.d: New test. |
| * testsuite/gas/mips/micromips@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips1@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips2@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips32@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips32r2@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips32r3@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips32r5@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips32r6@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips64r2@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips64r3@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips64r5@isa-override-1.d: New test. |
| * testsuite/gas/mips/mips64r6@isa-override-1.d: New test. |
| * testsuite/gas/mips/r3000@isa-override-1.d: New test. |
| * testsuite/gas/mips/r3900@isa-override-1.d: New test. |
| * testsuite/gas/mips/r5900@isa-override-1.d: New test. |
| * testsuite/gas/mips/octeon@isa-override-1.d: New test. |
| * testsuite/gas/mips/octeon3@isa-override-1.d: New test. |
| * testsuite/gas/mips/isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips1@isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips2@isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips32@isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips32r2@isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips32r3@isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips32r5@isa-override-2.l: New list test. |
| * testsuite/gas/mips/mips32r6@isa-override-2.l: New list test. |
| * testsuite/gas/mips/r3000@isa-override-2.l: New list test. |
| * testsuite/gas/mips/r3900@isa-override-2.l: New list test. |
| * testsuite/gas/mips/octeon3@isa-override-2.l: New list test. |
| * testsuite/gas/mips/octeon3@isa-override-1.l: New stderr |
| output. |
| * testsuite/gas/mips/isa-override-1.s: New test source. |
| * testsuite/gas/mips/r5900@isa-override-1.s: New test source. |
| * testsuite/gas/mips/isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips1@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips2@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips32@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips32r2@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips32r3@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips32r5@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips32r6@isa-override-2.s: New test source. |
| * testsuite/gas/mips/r3000@isa-override-2.s: New test source. |
| * testsuite/gas/mips/r3900@isa-override-2.s: New test source. |
| * testsuite/gas/mips/octeon3@isa-override-2.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * cgen.c: Likewise. |
| * config/tc-bfin.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-mep.c: Likewise. |
| * config/tc-metag.c: Likewise. |
| * config/tc-nios2.c: Likewise. |
| * config/tc-rl78.c: Likewise. |
| |
| 2016-04-20 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * doc/c-arc.texi (ARC Options): Add nps400 to list of valus for |
| -mcpu. Add cross reference to .cpu directive from -mcpu option. |
| (ARC Directives): Add NPS400 to .cpu directive list. |
| |
| 2016-04-20 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_features): Add "ras". |
| * doc/c-aarch64.texi (AArch64 Extensions): Add "ras". |
| * testsuite/gas/aarch64/armv8-ras-1.d: New. |
| * testsuite/gas/aarch64/armv8-ras-1.s: New. |
| * testsuite/gas/aarch64/illegal-ras-1.d: New. |
| * testsuite/gas/aarch64/illegal-ras-1.s: New. |
| |
| 2016-04-19 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-6.d: New file. |
| * testsuite/gas/arc/nps400-6.s: New file. |
| |
| 2016-04-19 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-4.d: New file. |
| * testsuite/gas/arc/nps400-4.s: New file. |
| * testsuite/gas/arc/nps400-5.d: New file. |
| * testsuite/gas/arc/nps400-5.s: New file. |
| |
| 2016-04-19 Martin Galvan <martin.galvan@tallertechnologies.com> |
| |
| * doc/as.texinfo (.cfi_remember_state, .cfi_restore_state): Improve |
| documentation. |
| |
| 2016-04-17 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| Revert prevous change. |
| * config/tc-arc.c (arc_option): Make .cpu directive |
| case-sensitive again. |
| |
| 2016-04-16 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_option): Make .cpu directive |
| case-insensitive. |
| |
| 2016-04-16 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_option): Allow NPS400 in .cpu directive. |
| |
| 2016-04-15 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-mips.c (md_begin): Remove useless assignment. |
| |
| 2016-04-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.in: Regenerated with automake 1.11.6. |
| * aclocal.m4: Likewise. |
| * doc/Makefile.in: Likewise. |
| |
| 2016-04-15 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (toc_reloc_types): Wrap in #ifdef OBJ_ELF |
| |
| 2016-04-14 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-nios2.c (nios2_as_options): Make file static. |
| * config/tc-ppc.c (toc_reloc_ypes): Likewise. |
| * config/tc-sparc.c (native_op_table): Likewise. |
| |
| 2016-04-14 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-m32c.c (M32C_Macros): Remove. |
| * config/tc-msp430.c (option_numbers): Likewise. |
| |
| 2016-04-14 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-3.d: New file. |
| * testsuite/gas/arc/nps400-3.s: New file. |
| |
| 2016-04-14 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/add_s-err.s: Update target pattern. |
| * testsuite/gas/arc/warn.s: Likewise. |
| * testsuite/gas/elf/elf.exp: Run test for arc. |
| |
| 2016-04-14 Nick Clifton <nickc@redhat.com> |
| |
| PR target/19938 |
| * testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string |
| sections possibly having the SHF_STRINGS flag bit set. |
| * testsuite/gas/i386/x86-64-unwind.d: Likewise. |
| |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (mach_type_specified_p): Change type to |
| bfd_boolean. |
| (arc_option): Set private flags when parsing cpu pseudo-op. |
| (md_parse_option): Set mach_type_specified_p to TRUE. |
| |
| 2016-04-13 Nick Clifton <nickc@redhat.com> |
| |
| PR target/19937 |
| * testsuite/gas/v850/pr19937.s: New test. |
| * testsuite/gas/v850/pr19937.d: New test control file. |
| * testsuite/gas/v850/basic.exp: Run the new test. |
| |
| 2016-04-13 Maciej W. Rozycki <macro@imgtec.com> |
| Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * config/tc-mips.c (relaxed_branch_length): Use the long |
| sequence where the target is a weak symbol. |
| (relaxed_micromips_32bit_branch_length): Likewise. |
| (relaxed_micromips_16bit_branch_length): Likewise. |
| * testsuite/gas/mips/branch-weak-1.d: New test. |
| * testsuite/gas/mips/branch-weak-2.d: New test. |
| * testsuite/gas/mips/branch-weak-3.d: New test. |
| * testsuite/gas/mips/branch-weak-4.d: New test. |
| * testsuite/gas/mips/branch-weak-5.d: New test. |
| * testsuite/gas/mips/branch-weak.l: New stderr output. |
| * testsuite/gas/mips/branch-weak.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-04-13 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (relaxed_branch_length): Use the long |
| sequence where the distance cannot be determined. |
| (relaxed_micromips_32bit_branch_length): Likewise. |
| * testsuite/gas/mips/branch-extern-1.d: New test. |
| * testsuite/gas/mips/branch-extern-2.d: New test. |
| * testsuite/gas/mips/branch-extern-3.d: New test. |
| * testsuite/gas/mips/branch-extern-4.d: New test. |
| * testsuite/gas/mips/branch-extern.l: New stderr output. |
| * testsuite/gas/mips/branch-extern.s: New test source. |
| * testsuite/gas/mips/branch-section-1.d: New test. |
| * testsuite/gas/mips/branch-section-2.d: New test. |
| * testsuite/gas/mips/branch-section-3.d: New test. |
| * testsuite/gas/mips/branch-section-4.d: New test. |
| * testsuite/gas/mips/branch-section.l: New stderr output. |
| * testsuite/gas/mips/branch-section.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/textauxregister.d: New file. |
| * testsuite/gas/arc/textauxregister.s: Likewise. |
| * testsuite/gas/arc/textcondcode.d: Likewise. |
| * testsuite/gas/arc/textcondcode.s: Likewise. |
| * testsuite/gas/arc/textcoreregister.d: Likewise. |
| * testsuite/gas/arc/textcoreregister.s: Likewise. |
| * testsuite/gas/arc/textpseudoop.d: Likewise. |
| * testsuite/gas/arc/textpseudoop.s: Likewise. |
| * testsuite/gas/arc/ld2.d: Update test. |
| * testsuite/gas/arc/st.d: Likewise. |
| * testsuite/gas/arc/taux.d: Likewise. |
| * doc/c-arc.texi (ARC Directives): Add .extCondCode, |
| .extCoreRegister and .extAuxRegister documentation. |
| * config/tc-arc.c (arc_extcorereg): New function. |
| (md_pseudo_table): Add .extCondCode, .extCoreRegister and |
| .extAuxRegister pseudo-ops. |
| (extRegister_t): New type. |
| (ext_condcode, arc_aux_hash): New global variable. |
| (find_opcode_match): Check for extensions. |
| (preprocess_operands): Likewise. |
| (md_begin): Add aux registers in a hash. |
| (assemble_insn): Update use arc_flags member. |
| (tokenize_extregister): New function. |
| (create_extcore_section): Likewise. |
| * config/tc-arc.h (arc_flags): Delete code, add flgp. |
| |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/noargs_a7.d: New file. |
| * testsuite/gas/arc/noargs_a7.s: Likewise. |
| * testsuite/gas/arc/noargs_hs.d: Likewise. |
| * testsuite/gas/arc/noargs_hs.s: Likewise. |
| |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/textinsn-errors.d: New File. |
| * testsuite/gas/arc/textinsn-errors.err: Likewise. |
| * testsuite/gas/arc/textinsn-errors.s: Likewise. |
| * testsuite/gas/arc/textinsn2op.d: Likewise. |
| * testsuite/gas/arc/textinsn2op.s: Likewise. |
| * testsuite/gas/arc/textinsn2op01.d: Likewise. |
| * testsuite/gas/arc/textinsn2op01.s: Likewise. |
| * testsuite/gas/arc/textinsn3op.d: Likewise. |
| * testsuite/gas/arc/textinsn3op.s: Likewise. |
| * doc/c-arc.texi (ARC Directives): Add .extInstruction |
| documentation. |
| * config/tc-arc.c (arcext_section): New variable. |
| (arc_extinsn): New function. |
| (md_pseudo_table): Add .extInstruction pseudo op. |
| (attributes_t): New type. |
| (suffixclass, syntaxclass, syntaxclassmod): New constant |
| structures. |
| (find_opcode_match): Remove arc_num_opcodes. |
| (md_begin): Likewise. |
| (tokenize_extinsn): New function. |
| (arc_set_ext_seg): Likewise. |
| (create_extinst_section): Likewise. |
| |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (preprocess_operands): Mark AUX symbol. |
| (arc_adjust_symtab): New function. |
| * config/tc-arc.h (ARC_FLAG_AUX): Define. |
| (obj_adjust_symtab): Likewise. |
| * testsuite/gas/arc/taux.d: New file. |
| * testsuite/gas/arc/taux.s: Likewise. |
| |
| 2016-04-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (s_option): Sanitize `.option picX' |
| pseudo-op. |
| * testsuite/gas/mips/option-pic-1.d: New test. |
| * testsuite/gas/mips/option-pic-2.l: New list test. |
| * testsuite/gas/mips/option-pic-1.s: New test source. |
| * testsuite/gas/mips/option-pic-2.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-04-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (s_option): Reject `.option picX' if VxWorks |
| PIC. |
| * testsuite/gas/mips/option-pic-vxworks-1.l: New list test. |
| * testsuite/gas/mips/option-pic-vxworks-2.l: New list test. |
| * testsuite/gas/mips/option-pic-vxworks-1.s: New test source. |
| * testsuite/gas/mips/option-pic-vxworks-2.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2016-04-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (can_swap_branch_p): Correct call formatting. |
| |
| 2016-04-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * messages.c (as_bad): Fix a typo in description. |
| |
| 2016-04-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_check_options): Unify messages. |
| |
| 2016-04-09 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (mips_check_options): Use `opts->isa' |
| consistently. |
| |
| 2016-04-08 Nick Clifton <nickc@redhat.com> |
| |
| PR target/19910 |
| * testsuite/gas/sparc/pr19910-1.d: Adjust regexps to work with |
| COFF and AOUT sparc targets. |
| |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7. |
| * testsuite/gas/arc/nps400-2.d: New file. |
| * testsuite/gas/arc/nps400-2.s: New file. |
| |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New |
| structure. |
| (arc_opcode_hash_entry_iterator_init): New function. |
| (arc_opcode_hash_entry_iterator_next): New function. |
| (find_opcode_match): Iterate over all arc_opcode entries |
| referenced by the arc_opcode_hash_entry passed in as a parameter. |
| |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_find_opcode): Now returns |
| arc_opcode_hash_entry pointer. |
| (find_opcode_match): Update argument type, extract arc_opcode from |
| incoming arc_opcode_hash_entry. |
| (find_special_case_pseudo): Update return type. |
| (find_special_case_flag): Update return type. |
| (find_special_case): Update return type. |
| (assemble_tokens): Lookup arc_opcode_hash_entry based on |
| instruction mnemonic, then use find_opcode_match to identify |
| specific arc_opcode. |
| |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (struct arc_opcode_hash_entry): New structure. |
| (arc_find_opcode): New function. |
| (find_special_case_pseudo): Use arc_find_opcode. |
| (find_special_case_flag): Likewise. |
| (assemble_tokens): Likewise. |
| (md_begin): Build hash using struct arc_opcode_hash_entry. |
| |
| 2016-04-07 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (arc_option): Prepare string for automatic |
| translation. |
| (declare_register): Likewise. |
| |
| 2016-04-06 James Greenhalgh <james.greenhalgh@arm.com> |
| |
| * doc/c-aarch64.texi (Architecture Extensions): Add entry for LSE. |
| Correct entry for RDMA. Alpha sort entries. |
| |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (tokenize_flags): Allow greater range of |
| characters into flag names. |
| |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (find_opcode_match): Handle O_symbol case, add |
| new de_fault label. |
| (preprocess_operands): Delete. |
| (assemble_tokens): Remove call to preprocess_operands. |
| |
| 2016-04-07 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/19910 |
| * config/tc-sparc.c (sparc_ip): Report an error if the expression |
| inside a %-macro could not be fully parsed. |
| * expr.c (integer_constant): Accept and ignore U suffixes to |
| integers. |
| (operand): When a missing closing parenthesis is encountered, |
| report the character that was found instead. |
| * testsuite/gas/mips/tls-ill.l: Update expected error message. |
| * testsuite/gas/sparc/pr19910-1.d: New test driver. |
| * testsuite/gas/sparc/pr19910-1.s: New test. |
| * testsuite/gas/sparc/pr19910-2.l: Expected error output. |
| * testsuite/gas/sparc/pr19910-2.s: New test. |
| * testsuite/gas/sparc/sparc.exp: Run the new tests. |
| |
| 2016-04-06 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c (msp430_operands): Check for a NOP preceding |
| an EINT instruction. Warn/fix as necessary. |
| * testsuite/gas/msp430/bad.s: Add test of EINT without preceding NOP. |
| * testsuite/gas/msp430/bad.l: Update expected messages. |
| |
| 2016-04-05 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-1.d: Update expected results. |
| * testsuite/gas/arc/nps400-1.s: Additional test cases. |
| |
| 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (is_code_density_p): Compare directly the |
| subclass field. |
| (is_spfp_p, is_dpfp_p, is_spfp_p): Define. |
| (check_cpu_feature): New function. |
| (find_opcode_match): Use check_cpu_feature function. |
| (preprocess_operands): Likewise. |
| (md_parse_option): Use mfpuda, mdpfp, mspfp options. |
| * testsuite/gas/arc/tdpfp.d: New file. |
| * testsuite/gas/arc/tfpuda.d: Likewise. |
| * testsuite/gas/arc/tfpx.s: Likewise. |
| |
| 2016-04-05 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (do_neon_mac_maybe_scalar): Allow F16. |
| * testsuite/gas/arm/armv8-2-fp16-simd.s: New tests. |
| * testsuite/gas/arm/armv8-2-fp16-simd.d: New expected results. |
| * testsuite/gas/arm/armv8-2-fp16-simd-thum.d: Likewise for Thumb. |
| * testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New warning results. |
| * testsuite/gas/arm/simd_by_scalar_low_regbank.s: New test source. |
| * testsuite/gas/arm/simd_by_scalar_low_regbank.d: New testcase. |
| * testsuite/gas/arm/simd_by_scalar_low_regbank_thumb.d: Likewise |
| for Thumb. |
| * testsuite/gas/arm/simd_by_scalar_low_regbank.l: New warning results. |
| |
| 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (assemble_insn): Prohibit pc-rel relocations for |
| JUMP instructions type. |
| * testsuite/gas/arc/relocs-errors.d: New file. |
| * testsuite/gas/arc/relocs-errors.err: Likewise. |
| * testsuite/gas/arc/relocs-errors.s: Likewise. |
| |
| 2016-04-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/19909 |
| * config/tc-i386.c (check_VecOperands): Try vec_disp8 encoding |
| only if i.disp_encoding != disp_encoding_32bit. |
| * gas/testsuite/gas/i386/disp32.s: Add tests for vmovdqu64.d32. |
| * gas/testsuite/gas/i386/x86-64-disp32.s: Likewise. |
| * gas/testsuite/gas/i386/disp32.d: Updated. |
| * gas/testsuite/gas/i386/x86-64-disp32.d: Likewise. |
| |
| 2016-04-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/19498 |
| * testsuite/gas/i386/i386.exp: Run pr19498. |
| * testsuite/gas/i386/pr19498.d: New file. |
| * testsuite/gas/i386/pr19498.s: Likewise. |
| |
| 2016-04-04 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.h: Include 'opcode/arc.h'. |
| (MAX_INSN_ARGS): Delete. |
| (MAX_INSN_FLGS): Delete. |
| |
| 2016-04-04 Alan Modra <amodra@gmail.com> |
| |
| PR 19498 |
| * symbols.c (resolve_symbol_value): Clear sy_resolving on exit |
| from function on all paths that set sy_resolving. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * app.c (app_push): use XNEW macro. |
| * as.c: Likewise. |
| * config/obj-elf.c (obj_elf_change_section): Likewise. |
| (elf_copy_symbol_attributes): Likewise. |
| (obj_elf_size): Likewise. |
| (build_group_lists): Likewise. |
| * config/tc-aarch64.c (add_operand_error_record): Likewise. |
| (md_assemble): Likewise. |
| (tc_gen_reloc): Likewise. |
| (get_upper_str): Likewise. |
| (aarch64_parse_features): Likewise. |
| * config/tc-arm.c (insert_reg_alias): Likewise. |
| (insert_neon_reg_alias): Likewise. |
| (find_or_make_literal_pool): Likewise. |
| (s_arm_elf_cons): Likewise. |
| (add_unwind_opcode): Likewise. |
| (arm_parse_extension): Likewise. |
| * config/tc-avr.c (create_record_for_frag): Likewise. |
| * config/tc-crx.c: Likewise. |
| * config/tc-d30v.c: Likewise. |
| * config/tc-dlx.c (s_proc): Likewise. |
| * config/tc-ft32.c: Likewise. |
| * config/tc-h8300.c: Likewise. |
| * config/tc-hppa.c (pa_proc): Likewise. |
| (create_new_space): Likewise. |
| (create_new_subspace): Likewise. |
| * config/tc-i860.c: Likewise. |
| * config/tc-i960.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-iq2000.c (iq2000_add_macro): Likewise. |
| (iq2000_record_hi16): Likewise. |
| * config/tc-m32c.c (m32c_indirect_operand): Likewise. |
| * config/tc-m32r.c (debug_sym): Likewise. |
| (m32r_record_hi16): Likewise. |
| * config/tc-m68k.c (m68k_ip): Likewise. |
| (md_begin): Likewise. |
| * config/tc-mcore.c: Likewise. |
| * config/tc-microblaze.c (check_got): Likewise. |
| * config/tc-mips.c (append_insn): Likewise. |
| (s_mipsset): Likewise. |
| (mips_record_label): Likewise. |
| (s_mips_end): Likewise. |
| * config/tc-mmix.c (mmix_frob_file): Likewise. |
| * config/tc-mn10200.c: Likewise. |
| * config/tc-mn10300.c: Likewise. |
| * config/tc-moxie.c: Likewise. |
| * config/tc-msp430.c: Likewise. |
| * config/tc-nds32.c (nds32_elf_save_pseudo_pattern): Likewise. |
| * config/tc-ns32k.c: Likewise. |
| * config/tc-or1k.c: Likewise. |
| * config/tc-pdp11.c: Likewise. |
| * config/tc-pj.c (fake_opcode): Likewise. |
| * config/tc-ppc.c (ppc_apuinfo_section_add): Likewise. |
| (ppc_macro): Likewise. |
| (ppc_dwsect): Likewise. |
| (ppc_machine): Likewise. |
| * config/tc-rl78.c (rl78_frag_init): Likewise. |
| * config/tc-rx.c (rx_frag_init): Likewise. |
| * config/tc-s390.c (s390_lit_suffix): Likewise. |
| (s390_machine): Likewise. |
| (s390_machinemode): Likewise. |
| * config/tc-score.c (s3_insert_reg): Likewise. |
| (s3_gen_reloc): Likewise. |
| * config/tc-score7.c (s7_insert_reg): Likewise. |
| (s7_gen_reloc): Likewise. |
| * config/tc-tic30.c (tic30_operand): Likewise. |
| * config/tc-tic4x.c (tic4x_inst_make): Likewise. |
| * config/tc-tic54x.c (stag_add_field): Likewise. |
| (tic54x_struct): Likewise. |
| (tic54x_space): Likewise. |
| (tic54x_field): Likewise. |
| (tic54x_mlib): Likewise. |
| (subsym_substitute): Likewise. |
| * config/tc-tic6x.c (tic6x_frob_label): Likewise. |
| * config/tc-vax.c: Likewise. |
| * config/tc-xc16x.c: Likewise. |
| * config/tc-xtensa.c (xtensa_add_insn_label): Likewise. |
| (directive_push): Likewise. |
| (xtensa_begin_directive): Likewise. |
| (tokenize_arguments): Likewise. |
| (xtensa_add_literal_sym): Likewise. |
| (new_resource_table): Likewise. |
| (resize_resource_table): Likewise. |
| (emit_single_op): Likewise. |
| (xtensa_create_trampoline_frag): Likewise. |
| (xtensa_maybe_create_literal_pool_frag): Likewise. |
| (xtensa_add_config_info): Likewise. |
| (xtensa_realloc_fixup_cache): Likewise. |
| (add_subseg_info): Likewise. |
| (cache_literal_section): Likewise. |
| (add_xt_block_frags): Likewise. |
| (add_xt_prop_frags): Likewise. |
| (init_op_placement_info_table): Likewise. |
| (build_section_rename): Likewise. |
| * config/tc-z80.c: Likewise. |
| * config/tc-z8k.c: Likewise. |
| * depend.c (register_dependency): Likewise. |
| * dwarf2dbg.c (get_line_subseg): Likewise. |
| (dwarf2_gen_line_info_1): Likewise. |
| (get_filenum): Likewise. |
| * ecoff.c (allocate_scope): Likewise. |
| (allocate_vlinks): Likewise. |
| (allocate_shash): Likewise. |
| (allocate_thash): Likewise. |
| (allocate_tag): Likewise. |
| (allocate_forward): Likewise. |
| (allocate_thead): Likewise. |
| (allocate_lineno_list): Likewise. |
| * expr.c (make_expr_symbol): Likewise. |
| * hash.c (hash_new_sized): Likewise. |
| * input-file.c (input_file_push): Likewise. |
| * listing.c (file_info): Likewise. |
| (listing_newline): Likewise. |
| * macro.c (new_formal): Likewise. |
| (define_macro): Likewise. |
| * remap.c (add_debug_prefix_map): Likewise. |
| * symbols.c (symbol_find_noref): Likewise. |
| (define_dollar_label): Likewise. |
| (fb_label_instance_inc): Likewise. |
| (symbol_relc_make_value): Likewise. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/obj-elf.c (obj_elf_vendor_attribute): Use xstrdup. |
| * config/tc-ppc.c (ppc_frob_file_before_adjust): Likewise. |
| (ppc_znop): Likewise. |
| (ppc_pe_section): Likewise. |
| (ppc_frob_symbol): Likewise. |
| * config/tc-tic30.c (tic30_operand): Likewise. |
| * config/tc-tic4x.c (tic4x_sect): Likewise. |
| (tic4x_usect): Likewise. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-alpha.c: Const qualify FLT_CHARS. |
| * config/atof-ieee.c: Remove declarations of FLT_CHARS and EXP_CHARS. |
| * config/tc-cris.h: Likewise. |
| * expr.c: Likewise. |
| * config/tc-mmix.c (md_atof): Adjust comment. |
| * config/tc-mmix.h: Stop defining FLT_CHARS and EXP_CHARS as macros. |
| * tc.h: Declare FLT_CHARS and EXP_CHARS. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-score.c (s3_gen_reloc): Add const qualifiers. |
| * config/tc-score7.c (s7_gen_reloc): Likewise. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-arm.c (do_t_branch): Change the type of reloc to |
| bfd_reloc_code_real_type. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/bfin-parse.y (current_inputline): Remove definition. |
| * config/tc-bfin.c (md_assemble): Simplify use of current_inputline. |
| |
| 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-avr.c (md_parse_option): Use strcasecmp () to compare |
| strings. |
| |
| 2016-04-02 Alan Modra <amodra@gmail.com> |
| |
| PR 19896 |
| * read.c (assign_symbol): Consume rest of line after an error |
| rather than continuing to process the line. |
| |
| 2016-04-01 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Rename to... |
| (MAX_FLAG_NAME_LENGTH): ...this. |
| (struct arc_flags): Update to use MAX_FLAG_NAME_LENGTH. |
| * config/tc-arc.c (tokenize_flags): Likewise. |
| |
| 2016-04-01 Alan Modra <amodra@gmail.com> |
| |
| * cgen.c (weak_operand_overflow_check): Return const char*. |
| * messages.c (as_internal_value_out_of_range): Formatting. |
| (as_warn_value_out_of_range): Consify prefix param. |
| (as_bad_value_out_of_range): Likewise. |
| * read.c (s_errwarn): Constify msg.. |
| (s_float_space, float_cons): ..and err. |
| * as.h (as_warn_value_out_of_range, as_bad_value_out_of_range, |
| ieee_md_atof, vax_md_atof): Update prototypes. |
| * tc.h (md_atof): Update prototype. |
| * config/atof-ieee.c (ieee_md_atof): Return const char*. |
| * config/atof-vax.c (vax_md_atof): Likewise. |
| * config/obj-elf.c (obj_elf_parse_section_letters): Constify bad_msg. |
| * config/tc-aarch64.c (md_atof): Return const char*. |
| * config/tc-alpha.c (s_alpha_section_name): Likewise. |
| (s_alpha_comm): Constify sec_name. |
| (section_name): Constify. |
| (s_alpha_section): Consify name.. |
| (alpha_elf_section_letter): ..and ptr_msg param.. |
| (md_atof): ..and return. |
| * config/tc-alpha.h (alpha_elf_section_letter): Update prototype. |
| * config/tc-arc.c (md_atof): Return const char*. |
| * config/tc-arm.c (md_atof): Likewise. |
| * config/tc-avr.c (md_atof): Likewise. |
| * config/tc-bfin.c (md_atof): Likewise. |
| * config/tc-cr16.c (md_atof): Likewise. |
| * config/tc-cris.c (md_atof): Likewise. |
| * config/tc-crx.c (md_atof): Likewise. |
| * config/tc-d10v.c (md_atof): Likewise. |
| * config/tc-d30v.c (md_atof): Likewise. |
| * config/tc-dlx.c (md_atof): Likewise. |
| * config/tc-epiphany.c (md_atof): Likewise. |
| * config/tc-fr30.c (md_atof): Likewise. |
| * config/tc-frv.c (md_atof): Likewise. |
| * config/tc-ft32.c (md_atof): Likewise. |
| * config/tc-h8300.c (md_atof): Likewise. |
| * config/tc-hppa.c (struct default_subspace_dict): Constify name. |
| (struct default_space_dict): Likewise. |
| (create_new_space): Constify name param. |
| (create_new_subspace): Likewise. |
| (is_defined_space, is_defined_subspace): Likewise. |
| (pa_parse_space_stmt): Constify space_name param. |
| (md_atof): Return const char*. |
| (pa_spaces_begin): Constify name. |
| * config/tc-i370.c (md_atof): Return const char*. |
| * config/tc-i386.c (md_atof): Likewise. |
| (x86_64_section_letter): Constify ptr_msg param. |
| * config/tc-i386.h (x86_64_section_letter): Update prototype. |
| * config/tc-i860.c (struct i860_it): Constify error. |
| (md_atof): Return const char*. |
| * config/tc-i960.c (md_atof): Likewise. |
| * config/tc-ia64.c (md_atof): Likewise. |
| (ia64_elf_section_letter): Constify ptr_msg param. |
| * config/tc-ia64.h (ia64_elf_section_letter): Update prototype. |
| * config/tc-ip2k.c (md_atof): Return const char*. |
| * config/tc-iq2000.c (md_atof): Likewise. |
| * config/tc-lm32.c (md_atof): Likewise. |
| * config/tc-m32c.c (md_atof): Likewise. |
| * config/tc-m32r.c (md_atof): Likewise. |
| * config/tc-m68hc11.c (md_atof): Likewise. |
| * config/tc-m68k.c (md_atof): Likewise. |
| * config/tc-mcore.c (md_atof): Likewise. |
| * config/tc-mep.c (md_atof): Likewise. |
| (mep_elf_section_letter): Constify ptr_msg param. |
| * config/tc-mep.h (mep_elf_section_letter): Update prototype. |
| * config/tc-metag.c (md_atof): Return const char*. |
| * config/tc-microblaze.c (md_atof): Likewise. |
| * config/tc-microblaze.h (md_atof): Delete prototype. |
| * config/tc-mips.c (mips_parse_argument_token): Constify err. |
| (md_atof): Return const char*. |
| * config/tc-mmix.c (md_atof): Likewise. |
| * config/tc-mn10200.c (md_atof): Likewise. |
| * config/tc-mn10300.c (md_atof): Likewise. |
| * config/tc-moxie.c (md_atof): Likewise. |
| * config/tc-msp430.c (md_atof): Likewise. |
| * config/tc-mt.c (md_atof): Likewise. |
| * config/tc-nds32.c (md_atof): Likewise. |
| * config/tc-nios2.c (md_atof): Likewise. |
| (nios2_elf_section_letter): Constify ptr_msg param. |
| * config/tc-nios2.h (nios2_elf_section_letter): Update prototype. |
| * config/tc-ns32k.c (md_atof): Return const char*. |
| * config/tc-or1k.c (md_atof): Likewise. |
| * config/tc-pdp11.c (struct pdp11_code): Constify error. |
| (md_atof): Return const char*. |
| * config/tc-pj.c (md_atof): Likewise. |
| * config/tc-ppc.c (md_atof): Likewise. |
| * config/tc-rl78.c (md_atof): Likewise. |
| * config/tc-rx.c (md_atof): Likewise. |
| * config/tc-s390.c (md_atof): Likewise. |
| * config/tc-score.c (s3_atof, md_atof): Likewise. |
| * config/tc-sh.c (md_atof): Likewise. |
| * config/tc-sparc.c (struct sparc_it): Constify error. |
| (md_atof): Return const char*. |
| * config/tc-spu.c (md_atof): Likewise. |
| * config/tc-tic30.c (md_atof): Likewise. |
| * config/tc-tic4x.c (md_atof): Likewise. |
| * config/tc-tic54x.c (md_atof): Likewise. |
| * config/tc-tic6x.c (md_atof): Likewise. |
| * config/tc-tilegx.c (md_atof): Likewise. |
| * config/tc-tilepro.c (md_atof): Likewise. |
| * config/tc-v850.c (parse_register_list, md_atof): Likewise. |
| * config/tc-vax.c (md_atof): Likewise. |
| * config/tc-visium.c (md_atof): Likewise. |
| * config/tc-xc16x.c (md_atof): Likewise. |
| * config/tc-xgate.c (md_atof): Likewise. |
| * config/tc-xstormy16.c (md_atof): Likewise. |
| * config/tc-xtensa.c (md_atof): Likewise. |
| * config/tc-z80.c (md_atof): Likewise. |
| * config/tc-z8k.c (md_atof): Likewise. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-xtensa.c (struct rename_section_struct): Make old_name |
| const. |
| (xtensa_section_rename): Make argument type const char *. |
| * config/tc-xtensa.h (xtensa_section_rename): Adjust. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-i960.c (parse_ldconst): Cast to char * when assigning to |
| args[0]. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-m32c.c (m32c_md_end): cast the argument to md_assemble to |
| char *. |
| (m32c_indirect_operand): Likewise. |
| * config/tc-nds32.c (do_pseudo_b): Likewise. |
| (do_pseudo_bal): Likewise. |
| (do_pseudo_ls_bhw): Likewise. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * as.c (parse_args): Cast literal to char * when assigning to optarg. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-ia64.c (md_assemble): Add temporary variable to pass to |
| get_symbol_name (). |
| * config/tc-sparc.c (s_register): Cast a literal to char * in |
| assignment. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-i960.c (parse_expr): Cast to char * when assigning to |
| input_line_pointer. |
| * config/tc-m32r.c (expand_debug_syms): Likewise. |
| * config/tc-msp430.c (msp430_dstoperand): Likewise. |
| * config/tc-z80.c (md_begin): Likewise. |
| * stabs.c (stabs_generate_asm_func): Likewise. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * cgen.c: Modernize the way functions declare arguments. |
| * config/tc-bfin.c: Likewise. |
| * config/tc-pdp11.c: Likewise. |
| * literal.c: Likewise. |
| * read.c: Likewise. |
| * stabs.c: Likewise. |
| |
| 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-aarch64.c (aarch64_handle_align): Make the type of some |
| variables unsigned char[]. |
| * config/tc-alpha.c (alpha_handle_align): Likewise. |
| * config/tc-arm.c (arm_handle_align): Likewise. |
| * config/tc-z80.c: Likewise. |
| |
| 2016-03-30 Nick Clifton <nickc@redhat.com> |
| |
| PR target/19880 |
| * config/tc-arm.c (do_t_push_pop): Cast bitmask to unsigned before |
| shifting. |
| |
| 2016-03-30 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/all/gas.exp: Don't xfail on ARC. |
| * testsuite/gas/elf/elf.exp: Likewise. |
| * testsuite/gas/all/redef3.d: Allow execution for ARC. |
| |
| 2016-03-30 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/warn.exp: Fix matching pattern. |
| |
| 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/ext2op.d: New file. |
| * testsuite/gas/arc/ext2op.s: Likewise. |
| * testsuite/gas/arc/ext3op.d: Likewise. |
| * testsuite/gas/arc/ext3op.s: Likewise. |
| |
| 2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-aarch64.c (struct aarch64_long_option_table): Ad const |
| qualifier. |
| * config/tc-alpha.c (md_parse_option): Likewise. |
| * config/tc-arc.c (md_parse_option): Likewise. |
| * config/tc-arm.c (struct arm_long_option_table): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-avr.c (md_parse_option): Likewise. |
| * config/tc-bfin.c (md_parse_option): Likewise. |
| * config/tc-cr16.c (md_parse_option): Likewise. |
| * config/tc-cris.c (s_cris_arch): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-crx.c (md_parse_option): Likewise. |
| * config/tc-d10v.c (md_parse_option): Likewise. |
| * config/tc-d30v.c (md_parse_option): Likewise. |
| * config/tc-dlx.c (md_parse_option): Likewise. |
| * config/tc-epiphany.c (md_parse_option): Likewise. |
| * config/tc-fr30.c (md_parse_option): Likewise. |
| * config/tc-frv.c (md_parse_option): Likewise. |
| * config/tc-ft32.c (md_parse_option): Likewise. |
| * config/tc-h8300.c (md_parse_option): Likewise. |
| * config/tc-hppa.c (md_parse_option): Likewise. |
| * config/tc-i370.c (md_parse_option): Likewise. |
| * config/tc-i386.c (md_parse_option): Likewise. |
| * config/tc-i860.c (md_parse_option): Likewise. |
| * config/tc-i960.c (md_parse_option): Likewise. |
| * config/tc-ia64.c (md_parse_option): Likewise. |
| * config/tc-ip2k.c (md_parse_option): Likewise. |
| * config/tc-iq2000.c (md_parse_option): Likewise. |
| * config/tc-lm32.c (md_parse_option): Likewise. |
| * config/tc-m32c.c (md_parse_option): Likewise. |
| * config/tc-m32r.c (md_parse_option): Likewise. |
| * config/tc-m68hc11.c (md_parse_option): Likewise. |
| * config/tc-m68k.c (md_parse_option): Likewise. |
| * config/tc-mcore.c (md_parse_option): Likewise. |
| * config/tc-mep.c (md_parse_option): Likewise. |
| * config/tc-metag.c (struct metag_long_option): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-microblaze.c (md_parse_option): Likewise. |
| * config/tc-microblaze.h (md_parse_option): Remove prototype. |
| * config/tc-mips.c (md_parse_option): Adjust. |
| * config/tc-mmix.c (md_parse_option): Likewise. |
| * config/tc-mn10200.c (md_parse_option): Likewise. |
| * config/tc-mn10300.c (md_parse_option): Likewise. |
| * config/tc-moxie.c (md_parse_option): Likewise. |
| * config/tc-msp430.c (md_parse_option): Likewise. |
| * config/tc-mt.c (md_parse_option): Likewise. |
| * config/tc-nds32.c (md_parse_option): Likewise. |
| * config/tc-nds32.h (nds32_parse_option): Likewise. |
| * config/tc-nios2.c (md_parse_option): Likewise. |
| * config/tc-ns32k.c (md_parse_option): Likewise. |
| * config/tc-or1k.c (md_parse_option): Likewise. |
| * config/tc-pdp11.c (md_parse_option): Likewise. |
| * config/tc-pj.c (md_parse_option): Likewise. |
| * config/tc-ppc.c (md_parse_option): Likewise. |
| * config/tc-rl78.c (md_parse_option): Likewise. |
| * config/tc-rx.c (md_parse_option): Likewise. |
| * config/tc-s390.c (s390_parse_cpu): Likewise. |
| * config/tc-score.c (md_parse_option): Likewise. |
| * config/tc-sh.c (md_parse_option): Likewise. |
| * config/tc-sparc.c (md_parse_option): Likewise. |
| * config/tc-spu.c (md_parse_option): Likewise. |
| * config/tc-tic30.c (md_parse_option): Likewise. |
| * config/tc-tic4x.c (md_parse_option): Likewise. |
| * config/tc-tic54x.c (md_parse_option): Likewise. |
| * config/tc-tic6x.c (md_parse_option): Likewise. |
| * config/tc-tilegx.c (md_parse_option): Likewise. |
| * config/tc-tilepro.c (md_parse_option): Likewise. |
| * config/tc-v850.c (md_parse_option): Likewise. |
| * config/tc-vax.c (md_parse_option): Likewise. |
| * config/tc-visium.c (struct visium_long_option_table): Likewise. |
| * config/tc-xc16x.c (md_parse_option): Likewise. |
| * config/tc-xgate.c (md_parse_option): Likewise. |
| * config/tc-xstormy16.c (md_parse_option): Likewise. |
| * config/tc-xtensa.c (md_parse_option): Likewise. |
| * config/tc-z80.c (md_parse_option): Likewise. |
| * config/tc-z8k.c (md_parse_option): Likewise. |
| * tc.h (md_parse_option): Likewise. |
| |
| 2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-bfin.c (gencode): Use XOBNEW obstack_alloc () wrapper. |
| * config/tc-hppa.c (fix_new_hppa): Likewise. |
| (pa_vtable_entry): Likewise. |
| (pa_vtable_inherit): Likewise. |
| * config/tc-m68k.c (md_begin): Likewise. |
| |
| 2016-03-28 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/obj-elf.c (obj_elf_section_name): Return const char *. |
| * config/obj-elf.h (obj_elf_section_name): Adjust. |
| * config/tc-aarch64.c (aarch64_parse_features): Likewise. |
| (aarch64_parse_cpu): Likewise. |
| (aarch64_parse_arch): Likewise. |
| * config/tc-arm.c (arm_parse_extension): Likewise. |
| (arm_parse_cpu): Likewise. |
| (arm_parse_arch): Likewise. |
| * config/tc-nds32.c: Likewise. |
| * config/xtensa-relax.c (parse_special_fn): Likewise. |
| * stabs.c (generate_asm_file): Likewise. |
| |
| 2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-cr16.c (cr16_assemble): New function. |
| (md_assemble): Call cr16_assemble. |
| |
| 2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * as.c (parse_args): Adjust. |
| * as.h (flag_size_check): Rename to flag_allow_nonconst_size. |
| * config/obj-elf.c (elf_frob_symbol): Adjust. |
| |
| 2016-03-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (sparc_ip): Remove the V9 restriction on ASR |
| registers to be in the 16..31 range. |
| |
| 2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-microblaze.c (md_assemble): Cast opc to char * when calling |
| frag_var (). |
| |
| 2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-visium.c (md_atof): Localize the string returned on |
| failure. |
| |
| 2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-h8300.c (h8300_elf_section): Add const qualifiers. |
| * config/tc-ia64.c (obj_elf_vms_common): Likewise. |
| * config/tc-m68hc11.c (md_begin): Likewise. |
| (print_opcode_list): Likewise. |
| * config/tc-msp430.c (msp430_section): Likewise. |
| * config/tc-score.c (struct s3_insn_to_dependency): Likewise. |
| (s3_build_dependency_insn_hsh): Likewise. |
| * config/tc-score7.c (struct s7_insn_to_dependency): Likewise. |
| (s7_build_dependency_insn_hsh): Likewise. |
| * config/tc-tic4x.c: Likewise. |
| * config/tc-tic54x.c (tic54x_set_default_include): Likewise. |
| (subsym_get_arg): Likewise. |
| * config/tc-xtensa.c (struct suffix_reloc_map): Likewise. |
| (get_directive): Likewise. |
| (cache_literal_section): Likewise. |
| * config/xtensa-relax.c: Likewise. |
| * symbols.c (symbol_create): Likewise. |
| (local_symbol_make): Likewise. |
| (symbol_relc_make_expr): Likewise. |
| |
| 2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-pdp11.c (md_assemble): Remove useless if and assignment to |
| str. |
| |
| 2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-sparc.c (sparc_regname_to_dw2regnum): Replace strchr () |
| call with a switch. |
| |
| 2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-ia64.c (ia64_do_align): Remove. |
| (ia64_cons_align): Call do_align () directly. |
| (dot_proc): Likewise. |
| (stmt_float_cons): Likewise. |
| |
| 2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * listing.c (listing_message): Use XNEW style allocation macros. |
| * read.c (read_a_source_file): Likewise. |
| (read_symbol_name): Likewise. |
| (s_mri_common): Likewise. |
| (assign_symbol): Likewise. |
| (s_reloc): Likewise. |
| (emit_expr_with_reloc): Likewise. |
| (s_incbin): Likewise. |
| (s_include): Likewise. |
| * sb.c (sb_build): Likewise. |
| (sb_check): Likewise. |
| |
| 2016-03-22 Alan Modra <amodra@gmail.com> |
| |
| * write.c (record_alignment): Revert 2016-02-18 change. |
| |
| 2016-03-22 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-alpha.c (load_expression): Replace alloca with xmalloc. |
| (emit_jsrjmp, tc_gen_reloc): Likewise. |
| * config/tc-i370.c (i370_macro): Likewise. |
| |
| 2016-03-22 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/nps400-0.d: New file. |
| * testsuite/gas/arc/nps400-0.s: New file. |
| * testsuite/gas/arc/nps400-1.d: New file. |
| * testsuite/gas/arc/nps400-1.s: New file. |
| |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (find_opcode_match): Move lnflg, and i |
| declarations to start of block. Reset code on all flags before |
| attempting to match them. Handle multiple hits on the same flag. |
| Handle flag class. |
| * testsuite/gas/arc/asm-errors.d: New file. |
| * testsuite/gas/arc/asm-errors.err: New file. |
| * testsuite/gas/arc/asm-errors.s: New file. |
| |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (cpu_types): Add nps400 entry. |
| (check_zol): Handle nps400. |
| |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_select_cpu): Remove use of |
| EF_ARC_CPU_GENERIC. |
| |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-arc.c (arc_target): Delay initialisation until |
| arc_select_cpu. |
| (arc_target_name): Likewise. |
| (arc_features): Likewise. |
| (arc_mach_type): Likewise. |
| (cpu_types): Remove "all" entry. |
| (arc_select_cpu): New function, most of the content is from... |
| (md_parse_option): ... here. Call new arc_select_cpu. |
| (md_begin): Call arc_select_cpu if needed, default is now arc700. |
| |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/inline-data-1.d: Add target restriction. |
| * testsuite/gas/arc/inline-data-2.d: New file. |
| |
| 2016-03-21 Nick Clifton <nickc@redhat.com> |
| |
| * atof-generic.c: Replace use of alloca with call to xmalloc. |
| * cgen.c: Likewise. |
| * dwarf2dbg.c: Likewise. |
| * macro.c: Likewise. |
| * remap.c: Likewise. |
| * stabs.c: Likewise. |
| * symbols.c: Likewise. |
| * config/obj-elf.c: Likewise. |
| * config/tc-aarch64.c: Likewise. |
| * config/tc-arc.c: Likewise. |
| * config/tc-arm.c: Likewise. |
| * config/tc-avr.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-mips.c: Likewise. |
| * config/tc-msp430.c: Likewise. |
| * config/tc-nds32.c: Likewise. |
| * config/tc-ppc.c: Likewise. |
| * config/tc-sh.c: Likewise. |
| * config/tc-tic30.c: Likewise. |
| * config/tc-tic54x.c: Likewise. |
| * config/tc-xstormy16.c: Likewise. |
| * config/te-vms.c: Likewise. |
| * configure: Regenerate. |
| |
| 2016-03-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * tc-i386.c (f32_1): Change type to unsigned char[]. |
| (f32_2): Likewise. |
| (f32_3): Likewise. |
| (f32_4): Likewise. |
| (f32_5): Likewise. |
| (f32_6): Likewise. |
| (f32_7): Likewise. |
| (f32_8): Likewise. |
| (f32_9): Likewise. |
| (f32_10): Likewise. |
| (f32_11): Likewise. |
| (f32_12): Likewise. |
| (f32_13): Likewise. |
| (f32_14): Likewise. |
| (f16_3): Likewise. |
| (f16_4): Likewise. |
| (f16_5): Likewise. |
| (f16_6): Likewise. |
| (f16_7): Likewise. |
| (f16_8): Likewise. |
| (jump_31): Likewise. |
| (f32_patt): Likewise. |
| (f16_patt): Likewise. |
| (alt_3): Likewise. |
| (alt_4): Likewise. |
| (alt_5): Likewise. |
| (alt_6): Likewise. |
| (alt_7): Likewise. |
| (alt_8): Likewise. |
| (alt_9): Likewise. |
| (alt_10): Likewise. |
| (alt_patt): Likewise. |
| |
| 2016-03-18 Nick Clifton <nickc@redhat.com> |
| |
| * doc/c-aarch64.texi (AArch64 Directives): Add descriptions of |
| .cpu, .dword, .even, .inst. .tlsdescadd, .tlsdesccall, |
| .tlsdescldr and .xword directives. |
| |
| PR target/19721 |
| * testsuite/gas/aarch64/pr19721.s: New test source file. |
| * testsuite/gas/aarch64/pr19721.d: New test driver file. |
| |
| * doc/as.texinfo: Place the target specific command line options |
| into their own man page section. |
| |
| 2016-03-16 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (N_S_32): New. |
| (N_F_16_32): Likewise. |
| (N_SUF_32): Support N_F16. |
| (N_IF_32): Likewise. |
| (neon_dyadic_misc): Likewise. |
| (do_neon_cmp): Likewise. |
| (do_neon_cmp_inv): Likewise. |
| (do_neon_mul): Likewise. |
| (do_neon_fcmp_absolute): Likewise. |
| (do_neon_step): Likewise. |
| (do_neon_abs_neg): Likewise. |
| (CVT_FLAVOR_VAR): Likewise. |
| (do_neon_cvt_1): Likewise. |
| (do_neon_recip_est): Likewise. |
| (do_vmaxnm): Likewise. |
| (do_vrint_1): Likewise. |
| (neon_check_type): Check architecture support for FP16 extension. |
| (insns): Update comments. |
| * testsuite/gas/arm/armv8-2-fp16-simd.s: New test source. |
| * testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode. |
| * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode. |
| * testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for |
| arm mode. |
| * testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for |
| thumb mode. |
| * testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection |
| error file. |
| |
| 2016-03-16 Nick Clifton <nickc@redhat.com> |
| |
| * read.c (emit_expr_with_reloc): Add code check a bignum with |
| nbytes == 1. |
| * config/rx/rx-parse.y (rx_intop): Accept bignum values for sizes |
| other than 32-bits. |
| * testsuite/gas/elf/bignum.s: New test source file. |
| * testsuite/gas/elf/bignum.d: New test driver file. |
| * testsuite/gas/elf/elf.exp: Run the new test. |
| |
| 2016-03-15 Ulrich Drepper <drepper@gmail.com> |
| |
| * doc/c-i386.texi (Register Naming): Update to details of the |
| latest architecture version. |
| |
| 2016-03-10 Mickael Guene <mickael.guene@st.com> |
| |
| PR gas/19744 |
| * config/tc-arm.c (do_arit): Protect against bad relocations usage. |
| (do_mov): Likewise. |
| (do_t_add_sub): Allow pcrop relocations for Thumb-2 targets. |
| (do_t_mov_cmp): Likewise. |
| (do_t_add_sub): Protect against bad relocations usage. |
| (do_t_mov_cmp): Likewise. |
| * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.s: New. |
| * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: New. |
| * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.s: New. |
| * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: New. |
| |
| 2016-03-09 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-arm.c (neon_alignment_bit): Rename do_align to |
| do_alignment. |
| (do_neon_ld_st_lane): Likewise. |
| (do_neon_ld_dup): Likewise. |
| |
| 2016-03-08 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/inline-data-1.d: New file. |
| * testsuite/gas/arc/inline-data-1.s: New file. |
| |
| 2016-03-07 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add cortex-r8. |
| * doc/c-arm.texi: Add cortex-r8. |
| |
| 2016-03-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * config/tc-arc.c: Add const qualifiers. |
| * config/tc-h8300.c (md_begin): Likewise. |
| * config/tc-ia64.c (print_prmask): Likewise. |
| * config/tc-msp430.c (msp430_operands): Likewise. |
| * config/tc-nds32.c (struct suffix_name): Likewise. |
| (struct nds32_parse_option_table): Likewise. |
| (struct nds32_set_option_table): Likewise. |
| (do_pseudo_pushpopm): Likewise. |
| (do_pseudo_pushpop_stack): Likewise. |
| (nds32_relax_relocs): Likewise. |
| (nds32_flag): Likewise. |
| (struct nds32_hint_map): Likewise. |
| (nds32_find_reloc_table): Likewise. |
| (nds32_match_hint_insn): Likewise. |
| * config/tc-s390.c: Likewise. |
| * config/tc-sh.c (get_specific): Likewise. |
| * config/tc-tic30.c: Likewise. |
| * config/tc-tic4x.c (tic4x_inst_add): Likewise. |
| (tic4x_indirect_parse): Likewise. |
| * config/tc-vax.c (vax_cons): Likewise. |
| * config/tc-z80.c (struct reg_entry): Likewise. |
| * config/tc-epiphany.c (md_assemble): Adjust. |
| (epiphany_assemble): New function. |
| (epiphany_elf_section_rtn): Call do_align directly. |
| (epiphany_elf_section_text): Likewise. |
| * config/tc-ip2k.c (ip2k_elf_section_rtn): Likewise. |
| (ip2k_elf_section_text): Likewise. |
| * read.c (do_align): Make it not static. |
| * read.h (do_align): New prototype. |
| |
| 2016-03-04 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * config/tc-arm.c (aeabi_set_public_attributes): Emit attribute |
| for ARMv8.1 AdvSIMD use. |
| * testsuite/gas/arm/attr-march-armv8-a+rdma.d: New. |
| * testsuite/gas/arm/attr-march-armv8_1-a+simd.d: New. |
| |
| 2016-03-04 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * config/gas/tc-arm.c (fpu_neon_ext_v8_1): Restrict to the ARMv8.1 RDMA |
| feature. |
| (record_feature_use): New. |
| (mark_feature_used): Use record_feature_use. |
| (do_neon_qrdmlah): New. |
| (insns): Use do_neon_qrdmlah for vqrdmlah and vqrdmlsh and |
| variants. |
| (arm_extensions): Put into alphabetical order. Re-indent "simd" |
| and "rdma" entries. Fix the incorrect merge value for "+rdma". |
| * testsuite/gas/arm/armv8-a+rdma-warning.d: New. |
| * testsuite/gas/arm/armv8-a+rdma.d: Add assembler command line options. |
| Make source file explicit. |
| * testsuite/gas/arm/armv8-a+rdma.l: New. |
| * testsuite/gas/arm/armv8-a+rdma.s: Remove .arch and .arch_extension |
| directives. Fix white-space. |
| * testsuite/gas/arm/armv8_1-a+simd.d: New. |
| |
| 2016-03-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/x86_64-intel.d: Adjusted for COFF. |
| |
| 2016-02-29 Cupertino Miranda <cmiranda@synopsys.com> |
| Claudiu Zissulescu <Claudiu.Zissulescu@synopsys.com> |
| |
| * config/tc-arc.c (arc_extra_reloc): Change size to 0. |
| (tc_arc_fix_adjustable): Changed default return value to 1. |
| * testsuite/gas/arc/j.d: Updated expected symbol |
| * testsuite/gas/arc/jl.d: Likewise |
| * testsuite/gas/arc/relax-avoid1.d: Likewise |
| * testsuite/gas/arc/st.d: Likewise |
| |
| 2016-02-29 Claudiu Zissulescu <Claudiu.Zissulescu@synopsys.com> |
| |
| * config/tc-arc.c: Enable code density instructions for ARC EM. |
| |
| 2016-02-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/19645 |
| * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= |
| for ELF assemblers. |
| * as.c (flag_use_elf_stt_common): New. |
| (show_usage): Add --elf-stt-common=. |
| (option_values): Add OPTION_ELF_STT_COMMON. |
| (std_longopts): Add --elf-stt-common=. |
| (parse_args): Handle --elf-stt-common=. |
| * as.h (flag_use_elf_stt_common): New. |
| * config.in: Regenerated. |
| * configure: Likewise. |
| * configure.ac: Add --enable-elf-stt-common and define |
| DEFAULT_GENERATE_ELF_STT_COMMON. |
| * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON |
| and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. |
| * doc/as.texinfo: Document --elf-stt-common=. |
| * testsuite/gas/elf/common3.s: New file. |
| * testsuite/gas/elf/common3a.d: Likewise. |
| * testsuite/gas/elf/common3b.d: Likewise. |
| * testsuite/gas/elf/common4.s: Likewise. |
| * testsuite/gas/elf/common4a.d: Likewise. |
| * testsuite/gas/elf/common4b.d: Likewise. |
| * testsuite/gas/i386/dw2-compress-3b.d: Likewise. |
| * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. |
| * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a |
| and common4b. |
| * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... |
| * testsuite/gas/i386/dw2-compress-3a.d: This. Pass |
| --elf-stt-common=no to as. |
| * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... |
| * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass |
| --elf-stt-common=no to as. |
| * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, |
| dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead |
| of dw2-compress-3 and dw2-compressed-3. |
| |
| 2016-02-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * as.c (select_emulation_mode): Add const qualifiers. |
| * as.h: Likewise. |
| * config/bfin-defs.h: Likewise. |
| * config/bfin-parse.y: Likewise. |
| * config/rx-parse.y: Likewise. |
| * config/tc-aarch64.c (struct aarch64_option_table): Likewise. |
| (struct aarch64_cpu_option_table): Likewise. |
| (struct aarch64_arch_option_table): Likewise. |
| (struct aarch64_option_cpu_value_table): Likewise. |
| (struct aarch64_long_option_table): Likewise. |
| (struct aarch64_option_abi_value_table): Likewise. |
| * config/tc-arm.c (struct reloc_entry): Likewise. |
| (tc_gen_reloc): Likewise. |
| (struct arm_option_table): Likewise. |
| (struct arm_legacy_option_table): Likewise. |
| (struct arm_cpu_option_table): Likewise. |
| (struct arm_arch_option_table): Likewise. |
| (struct arm_option_extension_value_table): Likewise. |
| (struct arm_option_fpu_value_table): Likewise. |
| (struct arm_option_value_table): Likewise. |
| (struct arm_long_option_table): Likewise. |
| * config/tc-avr.c (struct avr_opcodes_s): Likewise. |
| (struct mcu_type_s): Likewise. |
| (struct exp_mod_s): Likewise. |
| (avr_operand): Likewise. |
| (avr_operands): Likewise. |
| * config/tc-d10v.c (md_begin): Likewise. |
| * config/tc-dlx.c: Likewise. |
| * config/tc-fr30.c (fr30_is_colon_insn): Likewise. |
| * config/tc-ft32.c (parse_condition): Likewise. |
| * config/tc-h8300.c (do_a_fix_imm): Likewise. |
| * config/tc-hppa.c (pa_ip): Likewise. |
| (hppa_regname_to_dw2regnum): Likewise. |
| * config/tc-i370.c (i370_elf_suffix): Likewise. |
| * config/tc-i960.c (struct tabentry): Likewise. |
| * config/tc-m32r.c: Likewise. |
| * config/tc-m68k.c: Likewise. |
| * config/tc-m68k.h: Likewise. |
| * config/tc-mcore.c (parse_psrmod): Likewise. |
| * config/tc-metag.c (struct metag_core_option): Likewise. |
| (struct metag_long_option): Likewise. |
| * config/tc-microblaze.c: Likewise. |
| * config/tc-mips.c (macro): Likewise. |
| * config/tc-mn10200.c: Likewise. |
| * config/tc-mn10300.c: Likewise. |
| * config/tc-msp430.c (struct rcodes_s): Likewise. |
| (struct hcodes_s): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-ns32k.c (struct ns32k_option): Likewise. |
| (optlist): Likewise. |
| * config/tc-ppc.c (ppc_elf_suffix): Likewise. |
| (tc_ppc_regname_to_dw2regnum): Likewise. |
| * config/tc-ppc.h: Likewise. |
| * config/tc-rl78.c: Likewise. |
| * config/tc-rx.c (struct cpu_type): Likewise. |
| * config/tc-sh.c (sh_regname_to_dw2regnum): Likewise. |
| * config/tc-sparc.c (struct priv_reg_entry): Likewise. |
| (sparc_ip): Likewise. |
| * config/tc-spu.c (insn_fmt_string): Likewise. |
| * config/tc-tic54x.c (tic54x_set_default_include): Likewise. |
| * config/tc-v850.c: Likewise. |
| * config/tc-visium.c (struct visium_arch_option_table): Likewise. |
| (struct visium_long_option_table): Likewise. |
| * config/tc-xgate.c: Likewise. |
| * config/tc-z8k.c: Likewise. |
| * read.c (add_include_dir): Likewise. |
| * read.h: Likewise. |
| |
| 2016-02-25 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/all/gas.exp: Change target pattern to cover |
| arceb-*. |
| * testsuite/gas/all/redef3.d: Likewise. |
| * testsuite/gas/elf/elf.exp: Likewise. |
| |
| 2016-02-24 Renlin Li <renlin.li@arm.com> |
| |
| * config/tc-arm.c (BAD_FP16): New error message macro. |
| (do_scalar_fp16_v82_encode): Change the coproc field to 9 for armv8.2 |
| fp16 scalar instructions. |
| (neon_check_type): Allow different size from key. |
| (do_vfp_nsyn_add_sub): Add support SE_H shape support. |
| (try_vfp_nsyn): Likewise. |
| (do_vfp_nsyn_mla_mls): Likewise. |
| (do_vfp_nsyn_fma_fms): Likewise. |
| (do_vfp_nsyn_ldm_stm): Likewise |
| (do_vfp_nsyn_sqrt): Likewise |
| (do_vfp_nsyn_div): Likewise |
| (do_vfp_nsyn_nmul): Likewise. |
| (do_vfp_nsyn_cmp): Likewise. |
| (do_neon_shll): Likewise. |
| (do_vfp_nsyn_cvt_fpv8): Likewise. |
| (do_neon_cvttb_2): Likewise. |
| (do_neon_mov): Likewise. |
| (do_neon_rshift_round_imm): Likewise. |
| (do_neon_ldr_str): Likewise. |
| (do_vfp_nsyn_fpv8): Likewise. |
| (do_vmaxnm): Likewise. |
| (do_vrint_1): Likewise. |
| (insns): New entry for vins, vmovx. |
| (md_apply_fix): Left shift 1 bit for fp16 vldr/vstr. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-scalar.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-scalar.s: New. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-bad.s: New |
| * testsuite/gas/arm/armv8-2-fp16-scalar-bad.d: New |
| * testsuite/gas/arm/armv8-2-fp16-scalar-bad.l: New |
| |
| 2016-02-24 Renlin Li <renlin.li@arm.com> |
| |
| * config/tc-arm.c (NEON_ENC_TAB): Add fp16 instruction shape. |
| (neon_shape_class): New SC_HALF. |
| (neon_shape_el): New SE_H. |
| (neon_shape_el_size): New size for SE_H. |
| (N_F_ALL): New macro to aggregate N_F16, N_F32, N_64. |
| (neon_select_shape): Add SE_H support code. |
| (el_type_of_type_chk): Use N_F_ALL. |
| (do_vfp_nsyn_cvt): Add SE_H shape support. |
| (do_neon_cvtz): Likewise. |
| (do_neon_cvt_1): Likewise. |
| (do_neon_cvttb_1): Likewise. |
| |
| 2016-02-24 Renlin Li <renlin.li@arm.com> |
| |
| * testsuite/gas/arm/copro.d: Adjust output. |
| * testsuite/gas/arm/copro.s: Adjust co-processor num. |
| |
| 2016-02-24 Renlin Li <renlin.li@arm.com> |
| |
| * testsuite/gas/arm/mask_1.d: New. |
| * testsuite/gas/arm/mask_1.s: New. |
| |
| 2016-02-24 Renlin Li <renlin.li@arm.com> |
| |
| * testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11. |
| * testsuite/gas/arm/copro.d: Update. |
| |
| 2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add entry for cortex-a32. |
| * doc/c-arm.texi (ARM Options): Document cortex-a32. |
| |
| 2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * doc/c-arm.texi (ARM Options): Document cortex-a17. |
| |
| 2016-02-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/elf/elf.exp: Skip tests for common directive on |
| hpux. |
| |
| 2016-02-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * output-file.c (output_file_create): Make file name argument const. |
| (output_file_close): Likewise. |
| * output-file.h (output_file_create): Adjust. |
| (output_file_close): Likewise. |
| * depend.c (quote_string_for_make): Make src argument const char *. |
| (register_dependency): Likewise. |
| (wrap_output): Likewise. |
| * as.h (register_dependency): Adjust. |
| * config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to |
| as_where (); |
| * symbols.c (S_SET_EXTERNAL): Likewise. |
| * input-scrub.c (as_where): Return the file name. |
| * as.h (as_where): Adjust prototype. |
| * app.c (do_scrub_chars): Adjust. |
| * cond.c (s_elseif): Likewise. |
| (s_else): Likewise. |
| (initialize_cframe): Likewise. |
| * config/obj-coff.c (obj_coff_init_stab_section): Likewise. |
| * config/obj-elf.c (obj_elf_init_stab_section): Likewise. |
| * config/obj-som.c (obj_som_init_stab_section): Likewise. |
| * config/tc-aarch64.c (output_info): Likewise. |
| * config/tc-ia64.c (md_assemble): Likewise. |
| (dot_alias): Likewise. |
| * config/tc-m68k.c (m68k_frob_label): Likewise. |
| * config/tc-mmix.c (s_bspec): Likewise. |
| (mmix_handle_mmixal): Likewise. |
| * config/tc-rx.c (rx_include): Likewise. |
| * config/tc-tic54x.c (tic54x_set_default_include): Likewise. |
| (tic54x_adjust_symtab): Likewise. |
| * config/tc-xtensa.c (directive_push): Likewise. |
| (xtensa_sanity_check): Likewise. |
| (xtensa_relax_frag): Likewise. |
| (md_convert_frag): Likewise. |
| (tinsn_to_slotbuf): Likewise. |
| * dwarf2dbg.c (dwarf2_where): Likewise. |
| * ecoff.c (add_file): Likewise. |
| (ecoff_generate_asm_lineno): Likewise. |
| * expr.c (make_expr_symbol): Likewise. |
| * frags.c (frag_new): Likewise. |
| (frag_var_init): Likewise. |
| * listing.c (listing_newline): Likewise. |
| * messages.c (identify): Likewise. |
| (as_show_where): Likewise. |
| (as_warn_internal): Likewise. |
| (as_bad_internal): Likewise. |
| * read.c (s_irp): Likewise. |
| (s_macro): Likewise. |
| (s_reloc): Likewise. |
| * stabs.c (stabs_generate_asm_file): Likewise. |
| (stabs_generate_asm_lineno): Likewise. |
| (stabs_generate_asm_func): Likewise. |
| * write.c (fix_new_internal): Likewise. |
| * as.h (PRINTF_WHERE_LIKE): Make file name argument const. |
| (as_warn_value_out_of_range): Adjust prototype. |
| (as_bad_value_out_of_range): Adjust prototype. |
| * messages.c (identify): Make file name argument const char *. |
| (as_warn_internal): Likewise. |
| (as_warn_where): Likewise. |
| (as_bad_internal): Likewise. |
| (as_bad_where): Likewise. |
| (as_internal_value_out_of_range): Likewise. |
| (as_warn_value_out_of_range): Likewise. |
| (as_bad_value_out_of_range): Likewise. |
| * as.h (found_comment_file): Change type to const char *. |
| * cond.c (file_line::file): Likewise. |
| * config/obj-coff.c (obj_coff_init_stab_section): Make variable const. |
| * config/obj-elf.c (obj_elf_init_stab_section): Likewise. |
| * config/obj-som.c (obj_som_init_stab_section): Likewise. |
| * config/tc-aarch64.c (output_info): Likewise. |
| * config/tc-alpha.c (insert_operand): Likewise. |
| * config/tc-arc.c (insert_operand): Likewise. |
| * config/tc-d30v.c (check_size): Likewise. |
| * config/tc-ia64.c (struct alias): Likewise. |
| * config/tc-m68k.c (struct label_line): Likewise. |
| * config/tc-mcore.c (md_apply_fix): Likewise. |
| * config/tc-microblaze.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-mips.c (mips16_immed): Likewise. |
| * config/tc-mmix.c (mmix_handle_mmixal): Likewise. |
| * config/tc-ppc.c (ppc_insert_operand): Likewise. |
| * config/tc-rx.c (rx_include): Likewise. |
| * config/tc-s390.c (s390_insert_operand): Likewise. |
| * config/tc-tic54x.c (tic54x_set_default_include): Likewise. |
| (tic54x_adjust_symtab): Likewise. |
| * config/tc-tilegx.c (insert_operand): Likewise. |
| (apply_special_operator): Likewise. |
| * config/tc-tilepro.c (insert_operand): Likewise. |
| * config/tc-xtensa.c (directive_push): Likewise. |
| * ecoff.c (add_file): Likewise. |
| (ecoff_generate_asm_lineno): Likewise. |
| * listing.c (listing_newline): Likewise. |
| * read.c (s_irp): Likewise. |
| * write.c (install_reloc): Likewise. |
| * write.h (struct fix): Likewise. |
| * input-file.c (file_name): Change type to const char *. |
| (saved_file::file_name): Likewise. |
| (input_file_open): Change type of argument to const char *. |
| * input-file.h (input_file_open): Adjust. |
| * input-scrub.c (logical_input_file): change type to const char *. |
| (physical_input_file): Likewise. |
| (struct input_save): Adjust. |
| (input_scrub_push): Adjust. |
| (input_scrub_begin): Adjust. |
| (as_where): Adjust. |
| * input-scrub.c (input_scrub_new_file): Make file name argument const. |
| (input_scrub_include_file): Likewise. |
| (new_logical_line_flags): Likewise. |
| (new_logical_line): Likewise. |
| * as.h: Adjust. |
| * frags.h (struct frag): Change type of fr_file to const char *. |
| * expr.c (expr_symbol_where): Change type of file argument to |
| const char **. |
| * expr.h (expr_symbol_where): Likewise. |
| * config/tc-i370.c (md_apply_fix): adjust. |
| * config/tc-mmix.c (mmix_md_end): Likewise. |
| * config/tc-ppc.c (md_apply_fix): Likewise. |
| * config/tc-s390.c (md_apply_fix): Likewise. |
| * symbols.c (report_op_error): Likewise. |
| (resolve_symbol_value): Likewise. |
| * config/tc-ia64.c (slot::src_file): Change type to const char *. |
| (rsrc::file): Likewise. |
| * config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to |
| const char *. |
| (xtensa_relax_frag): Likewise. |
| (md_convert_frag): Likewise. |
| (tinsn_to_slotbuf): Likewise. |
| * expr.c (expr_symbol_line): Likewise. |
| * macro.c (define_macro): Likewise. |
| * macro.h (macro_struct): Likewise. |
| * messages.c (as_show_where): Likewise. |
| * read.c (s_macro): Likewise. |
| * stabs.c (stabs_generate_asm_file): Likewise. |
| (generate_asm_file): Likewise. |
| (stabs_generate_asm_lineno): Likewise. |
| * write.h (struct reloc_list): Likewise. |
| * input-scrub.c (as_where): Change return type to const char *. |
| * as.h (as_wheree): Adjust. |
| |
| 2016-02-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * write.c (compress_debug): Move BFD compression bits setting |
| to ... |
| (write_object_file): Here. |
| |
| 2016-02-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (register_number): Check RegVRex. |
| * testsuite/gas/i386/x86-64-avx512f.s: Add a test for vgatherqpd |
| with %zmm19 and %zmm3. |
| * testsuite/gas/i386/x86-64-avx512f-intel.d: Updated. |
| * testsuite/gas/i386/x86-64-avx512f.d: Likewise. |
| |
| 2016-02-19 Matthew Wahab <matthew.wahab@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (arm_ext_fp16): New. |
| (arm_extensions): New entry for "fp16". |
| |
| 2016-02-19 Nick Clifton <nickc@redhat.com> |
| |
| PR 19630 |
| * read.c (read_a_source_file): Check for assemble_one returning |
| with input_line_pointer set to NULL. |
| |
| 2016-02-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> |
| |
| * listing.c (rebuffer_line): Change return type to void. |
| |
| * symbols.c (decode_local_label_name): Make type a const char *. |
| * listing.c (print_source): Make type of p const char *. |
| (print_line): Make type of string const char *. |
| (buffer_line): Return const char *. |
| (title): Make type const char *. |
| (subtitle): Likewise. |
| (listing_listing): Make type of p const char *. |
| * messages.c (as_internal_value_out_of_range): Make type of prefix |
| const char *. |
| * stabs.c (s_stab_generic): make type of stab_secname, stabstr_secname |
| and string const char *. |
| * read.c (_bfd_rel): Make type of name const char *. |
| * app.c (out_string): Change type to const char *. |
| (struct app_save::out_string): Likewise. |
| |
| 2016-02-18 Dan Gisselquist <dgisselq@verizon.net> |
| Nick Clifton <nickc@redhat.com> |
| |
| * read.c (finish_bundle): Avoid recording a negative alignment. |
| (do_align): Use unsigned values for n, len and max. Only create |
| a frag if the alignment requirement is greater than the minimum |
| byte alignment. Avoid recording a negative alignment. |
| (s_align): Use unsigned values where appropriate. |
| (bss_alloc): Use an unsigned value for the alignment. |
| (sizeof_sleb128): Add a comment noting that we encode one octet |
| per byte, regardless of the value of OCTETS_PER_BYTE_POWER. |
| (emit_leb129_expr): Abort if the emitted encoding was longer than |
| expected. |
| * read.h (output_leb128): Update prototype. |
| (sizeof_leb128): Update prototype. |
| (bss_alloc): Update prototype. |
| * write.c (record_alignment): Use an unsigned value for the |
| alignment. Do not record alignments less than the minimum |
| alignment for a byte. |
| * write.h (record_alignment): Update prototype. |
| |
| 2016-02-17 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (xtensa_move_literals): Fix check for |
| .init.literal/.fini.literal section name. |
| * testsuite/gas/xtensa/all.exp: Add init-fini-literals to the |
| list of xtensa tests. |
| * testsuite/gas/xtensa/init-fini-literals.d: New file: |
| init-fini-literals test result patterns. |
| * testsuite/gas/xtensa/init-fini-literals.s: New file: |
| init-fini-literals test. |
| |
| 2016-02-17 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's |
| devices.csv file as of March 2016. |
| |
| 2016-02-16 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (tc_arc_frame_initial_instructions): New |
| function. |
| (tc_arc_regname_to_dw2regnum): Likewise. |
| * config/tc-arc.h (TARGET_USE_CFIPOP): Define |
| (tc_cfi_frame_initial_instructions): Likewise. |
| (tc_regname_to_dw2regnum): Likewise. |
| * testsuite/gas/cfi/cfi-arc-1.d: New file. |
| * testsuite/gas/cfi/cfi-arc-1.s: Likewise. |
| * testsuite/gas/cfi/cfi.exp: Allow running tests for arc. |
| |
| 2016-02-16 Trevor Saunders <tbsaunde@tbsaunde.org> |
| |
| * doc/internals.texi (S_IS_EXTERN): Remove. |
| |
| 2016-02-16 Nick Clifton <nickc@redhat.com> |
| |
| * doc/as.texinfo (Section): Fix up texinfo snafus in previous |
| update. |
| |
| 2016-02-16 Renlin Li <renlin.li@arm.com> |
| |
| PR gas/19620 |
| * config/tc-aarch64.c (parse_half): Remove restrictions on symbol name. |
| * testsuite/gas/aarch64/movw_label.d: New. |
| * testsuite/gas/aarch64/movw_label.s: New. |
| |
| 2016-02-15 Vinay Kumar G. <Vinay.G@kpit.com> |
| |
| PR gas/19556 |
| * config/rx-parse.y (MOV): Opcode generation for index |
| register addressing mode. |
| * testsuite/gas/rx/rx.exp: Updated for new testcase. |
| * testsuite/gas/rx/pr19665.s: New file. |
| * testsuite/gas/rx/pr19665.s: New file. |
| * testsuite/gas/rx/mov.d: Update expected output. |
| |
| 2016-02-15 Nick Clifton <nickc@redhat.com> |
| |
| * doc/as.texinfo (.section): Document that numeric values can now |
| be used for the flags and type fields of the ELF target's .section |
| directive. Add notes about the restrictions on setting flags and |
| types. |
| * config/obj-elf.c (obj_elf_change_section): Allow known sections |
| to be given processor specific section types. Allow processor and |
| application specific flags of a section to be set after |
| definition. |
| (obj_elf_parse_section_letters): Handle parsing numeric values. |
| (obj_elf_section_type): Handle parsing numeric values. |
| (obj_elf_section): Allow numeric type values. |
| * config/obj-elf.h (obj_elf_change_section): Update prototype. |
| * testsuite/gas/elf/section10.d: New test. |
| * testsuite/gas/elf/section10.s: Source file for new test. |
| * testsuite/gas/elf/elf.exp: Run the new test. |
| * testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon |
| the description of the flags produced by readelf. |
| * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. |
| * NEWS: Mention the new feature. |
| |
| 2016-02-11 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/19614 |
| * dw2gencfi.c (cfi_sections_set): Delay setting this variable |
| until it is actually used. |
| (cfi_set_sections): Set cfi_sections_set to true. |
| (dot_cfi_startproc): Likewise. |
| (dot_cfi_endproc): Likewise. |
| (dot_cfi_fde_data): Likewise. |
| (cfi_finish): Likewise. |
| (dot_cfi_sections): Do not set cfi_sections_set. |
| * doc/as.texinfo (.cfi_sections): Note that targets can provide |
| their own cfi section name. Also note that the directive can be |
| reissued provided that CFI generation has not started. |
| * testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and |
| .cfi_endproc directives so that the redefinition of .cfi_sections |
| will trigger the generation of the error message. |
| * testsuite/gas/mips/compact-eh-err2.l: Update expected line |
| number of error message. |
| |
| 2016-02-10 Claudiu Zissulescu <claziss@synopsys.com> |
| Janek van Oirschot <jvanoirs@synopsys.com> |
| |
| * config/tc-arc.h (TC_FRAG_TYPE, TC_PCREL_ADJUST, MAX_INSN_ARGS) |
| (MAX_INSN_FLGS, MAX_FLAG_NAME_LENGHT, TC_GENERIC_RELAX_TABLE): |
| Define. |
| (arc_flags, arc_relax_type): New structure. |
| * config/tc-arc.c (FRAG_MAX_GROWTH, RELAX_TABLE_ENTRY) |
| (RELAX_TABLE_ENTRY_MAX): New define. |
| (relaxation_state, md_relax_table, arc_relaxable_insns) |
| (arc_num_relaxable_ins): New variable. |
| (rlx_operand_type, arc_rlx_types): New enums. |
| (arc_relaxable_ins): New structure. |
| (OPTION_RELAX): New option. |
| (arc_insn): New relax member. |
| (arc_flags): Remove. |
| (relax_insn_p): New function. |
| (apply_fixups): Likewise. |
| (relaxable_operand): Likewise. |
| (may_relax_expr): Likewise. |
| (relaxable_flag): Likewise. |
| (arc_pcrel_adjust): Likewise. |
| (md_estimate_size_before_relax): Implement. |
| (md_convert_frag): Likewise. |
| (md_parse_option): Handle new mrelax option. |
| (md_show_usage): Likewise. |
| (assemble_insn): Set relax member. |
| (emit_insn0): New function. |
| (emit_insn1): Likewise. |
| (emit_insn): Handle relaxation case. |
| * NEWS: Mention the new relaxation option. |
| * doc/c-arc.texi (ARC Options): Document new mrelax option. |
| * doc/as.texinfo (Target ARC Options): Likewise. |
| * testsuite/gas/arc/relax-avoid1.d: New file. |
| * testsuite/gas/arc/relax-avoid1.s: Likewise. |
| * testsuite/gas/arc/relax-avoid2.d: Likewise. |
| * testsuite/gas/arc/relax-avoid2.s: Likewise. |
| * testsuite/gas/arc/relax-avoid3.d: Likewise. |
| * testsuite/gas/arc/relax-avoid3.s: Likewise. |
| * testsuite/gas/arc/relax-b.d: Likewise. |
| * testsuite/gas/arc/relax-b.s: Likewise. |
| |
| 2016-02-08 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-ia64.c (dot_prologue): Fix formatting. |
| |
| 2016-02-04 Nick Clifton <nickc@redhat.com> |
| |
| * config/obj-elf.c (obj_elf_change_section): Remove support for |
| ARM NOREAD sections. |
| * config/tc-arm.c (arm_elf_section_letter): Delete. |
| * config/tc-arm.h (md_elf_section_letter): Delete. |
| * doc/c-arm.texi (ARM Section Attribute): Delete section. |
| * testsuite/gas/arm/section-execute-only.d: Delete. |
| * testsuite/gas/arm/section-execute-only.s: Delete. |
| |
| 2016-02-04 Nick Clifton <nickc@redhat.com> |
| |
| PR target/19561 |
| * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2 |
| to handle encoding of RRUX instruction. |
| * testsuite/gas/msp430/msp430x.s: Add more tests of the extended |
| shift instructions. |
| * testsuite/gas/msp430/msp430x.d: Update expected disassembly. |
| |
| 2016-02-03 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF* |
| substitutions for BFD_RELOC_* as unsigned. |
| * testsuite/gas/xtensa/all.exp: Add loc to list of xtensa tests. |
| * testsuite/gas/xtensa/loc.d: New file: loc test result patterns. |
| * testsuite/gas/xtensa/loc.s: New file: loc test. |
| |
| 2016-02-03 Kevin Buettner <kevinb@redhat.com> |
| |
| * config/tc-msp430.h (DWARF2_ADDR_SIZE): Set to 4. |
| |
| 2016-02-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/19520 |
| * NEWS: Mention new command line option -mrelax-relocations and |
| new configure option --enable-x86-relax-relocations for x86 |
| target. |
| * config.in: Regenerated. |
| * configure.ac: Add --enable-x86-relax-relocations. |
| (ac_default_x86_relax_relocations): New. Default to 1 except |
| for x86 Solaris targets older than Solaris 12. |
| (DEFAULT_GENERATE_X86_RELAX_RELOCATIONS): Define. |
| * configure: Likewise. |
| * config/tc-i386.c (generate_relax_relocations): New. |
| (OPTION_MRELAX_RELOCATIONS): Likewise. |
| (output_disp): Don't generate relax relocations if |
| generate_relax_relocations is 0. |
| (md_longopts): Add -mrelax-relocations. |
| (md_show_usage): Likewise. |
| (md_parse_option): Handle OPTION_MRELAX_RELOCATIONS. |
| * doc/c-i386.texi: Document -mrelax-relocations=. |
| * testsuite/gas/i386/got-no-relax.d: New file. |
| * testsuite/gas/i386/x86-64-gotpcrel-no-relax.d: Likewise. |
| * testsuite/gas/i386/got.d: Pass -mrelax-relocations=yes to as. |
| * testsuite/gas/i386/localpic.d: Likewise. |
| * testsuite/gas/i386/mixed-mode-reloc32.d: Likewise. |
| * testsuite/gas/i386/reloc32.d: Likewise. |
| * testsuite/gas/i386/x86-64-gotpcrel.d: Likewise. |
| * testsuite/gas/i386/x86-64-localpic.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-gotpcrel.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise. |
| * testsuite/gas/i386/i386.exp: Run got-no-relax and |
| x86-64-gotpcrel-no-relax. |
| |
| 2016-02-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * NEWS: Mention new command line option -mfence-as-lock-add=yes |
| for x86 target. |
| |
| 2016-02-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * NEWS: Remove duplicated marker for 2.26. |
| |
| 2016-02-02 Renlin Li <renlin.li@arm.com> |
| |
| * testsuite/gas/arm/thumb2_it_search.d: Skip non-elf targets. |
| |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/ip2k/allinsn.d: New file. |
| * testsuite/gas/ip2k/allinsn.s: New file. |
| * testsuite/gas/ip2k/ip2k-allinsn.exp: New file. |
| |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/epiphany/addr-syntax.d: Add explicit 0 offset to |
| some load instructions. |
| * testsuite/gas/epiphany/allinsn.d: Likewise. |
| * testsuite/gas/epiphany/regression.d: Likewise. |
| |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/epiphany/addr-syntax.d: Remove unneeded '.l' |
| suffixes from instruction mnemonics in expected output. |
| * testsuite/gas/epiphany/allinsn.d: Likewise. |
| * testsuite/gas/epiphany/regression.d: Likewise. |
| * testsuite/gas/epiphany/sample.d: Likewise. |
| |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/epiphany/addr-syntax.d: Update expected register |
| names. |
| * testsuite/gas/epiphany/allinsn.d: Likewise. |
| * testsuite/gas/epiphany/sample.d: Likewise. |
| |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/epiphany/sample.d: Update expected output. |
| |
| 2016-01-26 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (md_apply_fix): Allow addendum. |
| (arc_reloc_op): Allow complex expressions for tpoff. |
| (md_apply_fix): Handle resolved TLS local symbol. |
| * testsuite/gas/arc/tls-relocs1.d: New file. |
| * testsuite/gas/arc/tls-relocs1.s: Likewise. |
| |
| 2016-02-01 Loria <Loria@phantasia.org> |
| |
| PR target/19311 |
| * config/tc-arm.c (encode_arm_immediate): Recode to improve |
| efficiency and avoid an LLVM loop optimization bug. |
| |
| 2016-02-01 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-microblaze.c (parse_imm): Fix compile time warning |
| message extending a negative 32-bit value into a larger signed |
| value on a 32-bit host. |
| |
| 2016-01-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/19532 |
| * configure.ac (compressed_debug_sections): Replace == with =. |
| * configure: Regenerated. |
| |
| 2016-01-29 Andrew Senkevich <andrew.senkevich@intel.com> |
| H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (avoid_fence): New. |
| (output_insn): Encode as lock addl $0x0, (%{r,e}sp) if avoid_fence |
| is true. |
| (OPTION_FENCE_AS_LOCK_ADD): New. |
| (md_longopts): Add -mfence-as-lock-add. |
| (md_parse_option): Handle -mfence-as-lock-add. |
| (md_show_usage): Add -mfence-as-lock-add=[no|yes]. |
| * doc/c-i386.texi (-mfence-as-lock-add): Document. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| * testsuite/gas/i386/fence-as-lock-add.s: New. |
| * testsuite/gas/i386/fence-as-lock-add-yes.d: Likewise. |
| * testsuite/gas/i386/fence-as-lock-add-no.d: Likewise. |
| * testsuite/gas/i386/x86-64-fence-as-lock-add-yes.d: Likewise. |
| * testsuite/gas/i386/x86-64-fence-as-lock-add-no.d: Likewise. |
| |
| 2016-01-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.ac (compressed_debug_sections): Remove trailing `]'. |
| * configure: Regenerated. |
| |
| 2016-01-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (OPTION_OMIT_LOCK_PREFIX): Renamed to ... |
| (OPTION_MOMIT_LOCK_PREFIX): This. |
| (md_longopts): Updated. |
| (md_parse_option): Likewise. |
| |
| 2016-01-25 Catherine Moore <clm@codesourcery.com> |
| |
| * config/mips/tc-mips.c (md_begin): Avoid gp-relative addressing |
| if abicalls are in effect. |
| * testsuite/gas/mips/sdata-gp.s: New test. |
| * testsuite/gas/mips/sdata-gp.d: New expected output |
| * testsuite/gas/mips/mips.exp: Run new test. |
| |
| 2016-01-25 Renlin Li <renlin.li@arm.com> |
| |
| * testsuite/gas/arm/thumb2_it_search.d: New. |
| * testsuite/gas/arm/thumb2_it_search.s: New. |
| |
| 2016-01-21 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/19454 |
| * testsuite/gas/arm/mapshort-elf.d: Fix expected output to cope |
| with arm-netbsdelf target. |
| * testsuite/gas/arm/blx-bl-convert.d: Skip for netbsdelf. |
| |
| 2016-01-20 Nick Clifton <nickc@redhat.com> |
| |
| PR 19456 |
| * testsuite/gas/arm/weakdef-1.d: Skip for VxWorks. |
| * testsuite/gas/arm/blx-bl-convert.d |
| * testsuite/gas/arm/plt-1.d: Likewise. |
| * testsuite/gas/arm/reloc-bad.d: Likewise. |
| * testsuite/gas/arm/thumb-w-good.d: Likewise. |
| * testsuite/gas/arm/thumb2_pool.d: Likewise. |
| * testsuite/gas/arm/ldconst.d: Adjust so that it works with VxWorks |
| * testsuite/gas/arm/tls_vxworks.d: Update expected output. |
| |
| PR 19499 |
| * doc/as.texinfo (Errors): Correct documentation describing the |
| interaction of .file and .line with warning and error messages. |
| |
| PR 19458 |
| * testsuite/gas/arm/armv8_2-a.d: Skip for COFF based targets. |
| * testsuite/gas/arm/archv8m-main.d: Likewise. |
| * testsuite/gas/arm/archv8m-base.d: Likewise. |
| |
| 2016-01-20 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * testsuite/gas/aarch64/armv8_2-a-illegal.d: New. |
| * testsuite/gas/aarch64/armv8_2-a-illegal.l: New. |
| * testsuite/gas/aarch64/armv8_2-a-illegal.s: New. |
| |
| 2016-01-20 Mickael Guene <mickael.guene@st.com> |
| Terry Guo <terry.guo@arm.com> |
| |
| * config/obj-elf.c (obj_elf_change_section) : Allow arm section with |
| SHF_ARM_NOREAD section flag. |
| * config/tc-arm.h (md_elf_section_letter) : Implement this hook to |
| handle letter 'y'. |
| (arm_elf_section_letter) : Declare it. |
| * config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set |
| SHF_ARM_NOREAD section flag. |
| * doc/c-arm.texi (ARM section attribute): Document the 'y' attribute. |
| |
| * testsuite/gas/arm/section-execute-only.s: New test case. |
| * testsuite/gas/arm/section-execute-only.d: Expected output. |
| |
| 2016-01-18 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-mips.c (micromips_insn_length): Remove the mention |
| of 48-bit microMIPS instructions. |
| |
| 2016-01-18 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2016-01-17 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2016-01-17 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test. |
| |
| 2016-01-14 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/rl78/sp-relative-movw.s: New test. |
| * testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly. |
| * testsuite/gas/rl78/rl78.exp: Run the new test. |
| |
| 2016-01-14 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * testsuite/gas/aarch64/illegal-sysreg-2.l: New. |
| * testsuite/gas/aarch64/illegal-sysreg-2.d: New. |
| |
| 2016-01-13 Maciej W. Rozycki <macro@imgtec.com> |
| |
| * config/tc-nios2.c (output_movia): Preset `code' to 0. |
| |
| 2016-01-13 Yoshinori Sato <ysato@users.sourceforge.jp> |
| |
| * config/tc-h8300.c (get_operand): Remove spurious condition in |
| test for closing parenthesis. |
| |
| 2016-01-12 Matthew Wahab <matthew.wahab@arm.com> |
| |
| * config/tc-arm.c (arm_ext_v8_2): New. |
| (insns): Add "esb". |
| * testsuite/gas/arm/armv8_2-a.d: New. |
| * testsuite/gas/arm/armv8_2-a.s: New. |
| |
| 2016-01-12 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/vsx3.d: Accept nop padding. |
| |
| 2016-01-11 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * testsuite/gas/ppc/power9.d <xscmpnedp, xvcmpnedp, xvcmpnedp., |
| xvcmpnesp, xvcmpnesp.>: Delete tests. |
| * testsuite/gas/ppc/power9.s: Likewise. |
| * testsuite/gas/ppc/vsx3.d: Likewise. |
| * testsuite/gas/ppc/vsx3.s: Likewise. |
| |
| 2016-01-08 Andreas Schwab <schwab@linux-m68k.org> |
| |
| PR gas/13050 |
| * testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2. |
| * testsuite/gas/m68k/p13050-1.s: New file. |
| * testsuite/gas/m68k/p13050-2.d: New file. |
| * testsuite/gas/m68k/p13050-2.s: New file. |
| |
| 2016-01-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * testsuite/gas/arc/adc.d: Add 'R_' prefix to relocation names. |
| * testsuite/gas/arc/add.d: Likewise. |
| * testsuite/gas/arc/and.d: Likewise. |
| * testsuite/gas/arc/asl.d: Likewise. |
| * testsuite/gas/arc/asr.d: Likewise. |
| * testsuite/gas/arc/bic.d: Likewise. |
| * testsuite/gas/arc/extb.d: Likewise. |
| * testsuite/gas/arc/extw.d: Likewise. |
| * testsuite/gas/arc/j.d: Likewise. |
| * testsuite/gas/arc/jl.d: Likewise. |
| * testsuite/gas/arc/ld2.d: Likewise. |
| * testsuite/gas/arc/lsr.d: Likewise. |
| * testsuite/gas/arc/mov.d: Likewise. |
| * testsuite/gas/arc/or.d: Likewise. |
| * testsuite/gas/arc/pcl-relocs.d: Likewise. |
| * testsuite/gas/arc/pcrel-relocs.d: Likewise. |
| * testsuite/gas/arc/pic-relocs.d: Likewise. |
| * testsuite/gas/arc/plt-relocs.d: Likewise. |
| * testsuite/gas/arc/rlc.d: Likewise. |
| * testsuite/gas/arc/ror.d: Likewise. |
| * testsuite/gas/arc/rrc.d: Likewise. |
| * testsuite/gas/arc/sbc.d: Likewise. |
| * testsuite/gas/arc/sda-relocs.d: Likewise. |
| * testsuite/gas/arc/sda-relocs2.d: Likewise. |
| * testsuite/gas/arc/sexb.d: Likewise. |
| * testsuite/gas/arc/sexw.d: Likewise. |
| * testsuite/gas/arc/st.d: Likewise. |
| * testsuite/gas/arc/sub.d: Likewise. |
| * testsuite/gas/arc/tls-relocs.d: Likewise. |
| * testsuite/gas/arc/xor.d: Likewise. |
| |
| 2016-01-01 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| For older changes see ChangeLog-2015 and testsuite/ChangeLog-2015 |
| |
| Copyright (C) 2016 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
