| # Copyright 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # use this to debug: |
| # |
| #log_user 1 |
| |
| # ending-run.exp -- Expect script to test ending a test run in gdb |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| set testfile ending-run |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/${testfile} |
| |
| remote_exec build "rm -f ${binfile}" |
| remote_exec build "rm -f core" |
| |
| |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| # CHFts23469: Test that you can "clear" a bp set at |
| # a line _before_ the routine (which will default to the |
| # first line in the routine, which turns out to correspond |
| # to the prolog--that's another bug...) |
| # |
| |
| gdb_test "b ending-run.c:1" ".*Breakpoint.*ending-run.c, line 1.*" \ |
| "bpt at line before routine" |
| |
| gdb_test "b ending-run.c:13" \ |
| ".*Note.*also.*Breakpoint 2.*ending-run.c, line 13.*" \ |
| "b ending-run.c:13, one" |
| |
| # Set up to go to the next-to-last line of the program |
| # |
| gdb_test "b ending-run.c:31" ".*Breakpoint 3.*ending-run.c, line 31.*" |
| |
| # Expect to hit the bp at line "1", but symbolize this |
| # as line "13". Then try to clear it--this should work. |
| # |
| if [target_info exists use_gdb_stub] { |
| gdb_test "continue" ".*Breakpoint.*1.*callee.*13.*" |
| } else { |
| gdb_test "r" ".*Breakpoint.*1.*callee.*13.*" |
| } |
| gdb_test "cle" ".*Deleted breakpoints 2 1.*" "clear worked" |
| send_gdb "i b\n" |
| gdb_expect { |
| -re ".*breakpoint.*breakpoint.*$gdb_prompt $" { |
| fail "cleared bp at line before routine" |
| } |
| -re ".*3.*main.*31.*$gdb_prompt $" { |
| pass "cleared bp at line before routine" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "cleared bp at line before routine (info b)" |
| } |
| } |
| |
| # Test some other "clear" combinations |
| # |
| gdb_test "b ending-run.c:1" ".*Breakpoint.*4.*" |
| gdb_test "b ending-run.c:13" ".*Note.*also.*Breakpoint.*5.*" "b ending-run.c:13, two" |
| gdb_test "cle ending-run.c:13" \ |
| ".*Deleted breakpoint 5.*" "Only cleared 1 by line" |
| |
| send_gdb "inf line ending-run.c:13\n" |
| gdb_expect { |
| -re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" { |
| set line_eight $expect_out(1,string) |
| gdb_test "b 13" ".*Breakpoint.*6.*" |
| gdb_test "cle *$line_eight" ".*Deleted breakpoints 6 4.*" "Clear 2 by address" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "need to fix test for new compile outcome" |
| } |
| } |
| |
| send_gdb "inf line ending-run.c:14\n" |
| gdb_expect { |
| -re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" { |
| set line_nine $expect_out(1,string) |
| gdb_test "b ending-run.c:14" ".*Breakpoint 7.*ending-run.c, line 14.*" |
| gdb_test "b *$line_nine" ".*Note.*also.*Breakpoint 8.*" |
| gdb_test "c" ".*Breakpoint.*7.*callee.*14.*" |
| gdb_test "cle" ".*Deleted breakpoints 8 7.*" "Clear 2 by default" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "need to fix test for new compile outcome" |
| } |
| } |
| |
| send_gdb "i b\n" |
| gdb_expect { |
| -re ".*breakpoint.*breakpoint.*$gdb_prompt $" { |
| fail "all set to continue (didn't clear bps)" |
| } |
| -re ".*3.*main.*31.*$gdb_prompt $" { |
| pass "all set to continue" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "all set to continue (missing bp at end)" |
| } |
| } |
| |
| |
| # See if we can step out with control. The "1 2 3" stuff |
| # is output from the program. |
| # |
| if ![gdb_skip_stdio_test "cont"] { |
| gdb_test "cont" ".*1 2 7 14 23 34 47 62 79.*Breakpoint.*31.*" |
| } else { |
| gdb_test "cont" ".*Breakpoint.*31.*" |
| } |
| |
| if ![gdb_skip_stdio_test "Step to return"] { |
| gdb_test "next" ".*Goodbye!.*32.*" \ |
| "Step to return" |
| } else { |
| gdb_test "next" "" "" |
| } |
| |
| set old_timeout $timeout |
| set timeout 50 |
| set program_exited 0 |
| send_gdb "next\n" |
| gdb_expect { |
| -re "33.*$gdb_prompt $" { |
| # sometimes we stop at the closing brace, if so, do another next |
| send_gdb "next\n" |
| gdb_expect { |
| -re ".*Unable to find return pc for this frame.*$gdb_prompt $" { |
| fail "step out of main (Old bug came back!)" |
| gdb_test "n" ".*" "" |
| } |
| -re ".*in.*start.*$gdb_prompt $" { |
| pass "step out of main" |
| } |
| -re ".*in.*bsp_trap.*$gdb_prompt $" { |
| pass "step out of main" |
| } |
| -re ".*in.*init.*$gdb_prompt $" { |
| # This is what happens on sparc64-elf ultra. |
| pass "step out of main" |
| } |
| -re ".*Program exited normally.*$gdb_prompt $" { |
| # This is what happens on Linux i86 (and I would expect others) |
| set program_exited 1 |
| pass "step out of main" |
| } |
| -re ".*in .nope ().*$gdb_prompt $" { |
| # This is what happens on Solaris currently -sts 1999-08-25 |
| pass "step out of main (on Solaris)" |
| } |
| -re ".*in _int_reset ().*$gdb_prompt $" { |
| # This is what happens on Sanyo XStormy16 |
| pass "step out of main" |
| } |
| -re ".*init ().*$gdb_prompt $" { |
| # This is what happens on many Mips targets |
| pass "step out of main" |
| } |
| -re ".*in ..change.mode ().*$gdb_prompt $" { |
| # This is what happens on ARM in thumb mode -fn 2000-02-01 |
| pass "step out of main (on ARM thumb)" |
| } |
| -re ".*in.*\\\$START\\\$.*from.*dld.sl.*$gdb_prompt $" { |
| pass "step out of main" |
| } |
| -re ".*in __wrap__?main ().*$gdb_prompt $" { |
| pass "step out of main (status wrapper)" |
| } |
| -re ".*$gdb_prompt $" { fail "step out of main (at end 2)" } |
| timeout { |
| fail "step out of main (hang or timeout on step at end 2)" |
| } |
| } |
| } |
| -re ".*Unable to find return pc for this frame.*$gdb_prompt $" { |
| fail "Old bug came back!" |
| gdb_test "n" ".*" "" |
| } |
| -re ".*in.*start.*$gdb_prompt $" { |
| pass "step out of main" |
| } |
| -re ".*in.*\\\$START\\\$.*from.*dld.sl.*$gdb_prompt $" { |
| pass "step out of main (2)" |
| } |
| -re ".*Program exited normally.*$gdb_prompt $" { |
| # This is what happens on Linux i86 (and I would expect others) |
| set program_exited 1 |
| pass "step out of main" |
| } |
| -re ".*in.*currently asm.*$gdb_prompt $" { |
| pass "step out of main (into assembler)" |
| } |
| -re ".*Program received signal SIGTRAP.*$gdb_prompt $" { |
| pass "Cygmon stopped in ending trap." |
| } |
| -re ".*$gdb_prompt $" { fail "step out of main (at end 1)" } |
| timeout { fail "step out of main (hang or timeout on step at end 1)" } |
| } |
| |
| # When we're talking to a program running on a real stand-alone board, |
| # every BSP's exit function behaves differently, so there's no single |
| # way to tell whether we've exited gracefully or not. So don't run |
| # these tests when use_gdb_stub is set, or when we're running under Cygmon. |
| set program_exited_normally 0 |
| set program_not_exited 0 |
| set program_in_exit 0 |
| if {! [target_info exists use_gdb_stub] |
| && (! [target_info exists use_cygmon] || ! [target_info use_cygmon])} { |
| global program_exited; |
| if {[eval expr $program_exited == 0]} { |
| send_gdb "n\n" |
| gdb_expect { |
| -re "Program exited normally.*$gdb_prompt $" { |
| # If we actually have debug info for the start function, |
| # then we won't get the "Single-stepping until function |
| # exit" message. |
| pass "step to end of run" |
| set program_exited_normally 1 |
| } |
| -re "Single.*EXIT code 0\r\n.*Program exited normally.*$gdb_prompt $" { |
| pass "step to end of run (status wrapper)" |
| set program_exited_normally 1 |
| } |
| -re "Single.*EXIT code 0\r\n.*$gdb_prompt $" { |
| pass "step to end of run (status wrapper)" |
| } |
| -re ".*Single.*Program exited.*$gdb_prompt $" { |
| pass "step to end of run" |
| set program_exited_normally 1 |
| } |
| -re ".*Single.*in exit.*from.*dld.sl.*$gdb_prompt $" { |
| pass "step to end of run" |
| set program_in_exit 1 |
| } |
| -re ".*Single.*_int_reset.*$gdb_prompt $" { |
| pass "step to end of run" |
| if {![istarget "xstormy16-*-*"]} { |
| set program_exited_normally 1 |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "step to end of run" |
| set program_not_exited 1 |
| } |
| timeout { |
| fail "(timeout) step to end of run" |
| set program_not_exited 1 |
| } |
| } |
| } |
| |
| if {$program_in_exit} { |
| if {[gdb_test "c" ".*" "continue after exit"] == 0} { |
| set program_exited_normally 1 |
| } |
| } else { |
| unsupported "continue after exit" |
| } |
| |
| set timeout $old_timeout |
| |
| if {$program_exited_normally} { |
| gdb_test "n" ".*The program is not being run.*" "don't step after run" |
| } elseif {$program_not_exited} { |
| unresolved "don't step after run" |
| } else { |
| unsupported "don't step after run" |
| } |
| |
| set exec_output [remote_exec host "ls core"] |
| |
| if [ regexp "core not found" $exec_output] { |
| pass "No core dumped on quit" |
| } else { |
| if [ regexp "No such file or directory" $exec_output] { |
| pass "ls: core (No core dumped on quit)" |
| } else { |
| remote_exec build "rm -f core" |
| fail "ls: core (Core dumped on quit)" |
| } |
| } |
| } |
| |
| #remote_exec build "rm -f ${binfile}" |
| return 0 |
| |
| |
| |
| |