| /* Print mips instructions for GDB, the GNU debugger, or for objdump. | |
| Copyright (C) 1989-2026 Free Software Foundation, Inc. | |
| Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp). | |
| This file is part of the GNU opcodes library. | |
| This library is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3, or (at your option) | |
| any later version. | |
| It is distributed in the hope that it will be useful, but WITHOUT | |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public | |
| License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, | |
| MA 02110-1301, USA. */ | |
| #include "sysdep.h" | |
| #include "disassemble.h" | |
| #include "libiberty.h" | |
| #include "opcode/mips.h" | |
| #include "opintl.h" | |
| #include "elf-bfd.h" | |
| #include "elf/mips.h" | |
| #include "elfxx-mips.h" | |
| /* FIXME: These are needed to figure out if the code is mips16 or | |
| not. The low bit of the address is often a good indicator. No | |
| symbol table is available when this code runs out in an embedded | |
| system as when it is used for disassembler support in a monitor. */ | |
| #if !defined(EMBEDDED_ENV) | |
| #define SYMTAB_AVAILABLE 1 | |
| #endif | |
| /* Mips instructions are at maximum this many bytes long. */ | |
| #define INSNLEN 4 | |
| /* FIXME: These should be shared with gdb somehow. */ | |
| struct mips_cp0sel_name | |
| { | |
| unsigned int cp0reg; | |
| unsigned int sel; | |
| const char * const name; | |
| }; | |
| static const char * const mips_gpr_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_gpr_names_oldabi[32] = | |
| { | |
| "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", | |
| "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", | |
| "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", | |
| "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" | |
| }; | |
| static const char * const mips_gpr_names_newabi[32] = | |
| { | |
| "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", | |
| "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3", | |
| "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", | |
| "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" | |
| }; | |
| static const char * const mips_fpr_names_numeric[32] = | |
| { | |
| "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", | |
| "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", | |
| "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", | |
| "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31" | |
| }; | |
| static const char * const mips_fpr_names_32[32] = | |
| { | |
| "fv0", "fv0f", "fv1", "fv1f", "ft0", "ft0f", "ft1", "ft1f", | |
| "ft2", "ft2f", "ft3", "ft3f", "fa0", "fa0f", "fa1", "fa1f", | |
| "ft4", "ft4f", "ft5", "ft5f", "fs0", "fs0f", "fs1", "fs1f", | |
| "fs2", "fs2f", "fs3", "fs3f", "fs4", "fs4f", "fs5", "fs5f" | |
| }; | |
| static const char * const mips_fpr_names_o64[32] = | |
| { | |
| "fv0", "fv1", "ft0", "ft1", "ft2", "ft3", "ft4", "ft5", | |
| "ft6", "ft7", "ft8", "ft9", "fa0", "fa1", "ft10", "ft11", | |
| "ft12", "ft13", "ft14", "ft15", "fs0", "fs1", "fs2", "fs3", | |
| "fs4", "fs5", "fs6", "fs7", "fs8", "fs9", "fs10", "fs11", | |
| }; | |
| static const char * const mips_fpr_names_n32[32] = | |
| { | |
| "fv0", "ft14", "fv1", "ft15", "ft0", "ft1", "ft2", "ft3", | |
| "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", | |
| "fa4", "fa5", "fa6", "fa7", "fs0", "ft8", "fs1", "ft9", | |
| "fs2", "ft10", "fs3", "ft11", "fs4", "ft12", "fs5", "ft13" | |
| }; | |
| static const char * const mips_fpr_names_64[32] = | |
| { | |
| "fv0", "ft12", "fv1", "ft13", "ft0", "ft1", "ft2", "ft3", | |
| "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", | |
| "fa4", "fa5", "fa6", "fa7", "ft8", "ft9", "ft10", "ft11", | |
| "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7" | |
| }; | |
| static const char * const mips_fpr_names_eabi32[32] = | |
| { | |
| "fv0", "fv0f", "fv1", "fv1f", "ft0", "ft0f", "ft1", "ft1f", | |
| "ft2", "ft2f", "ft3", "ft3f", "fa0", "fa0f", "fa1", "fa1f", | |
| "fa2", "fa2f", "fa3", "fa3f", "fs0", "fs0f", "fs1", "fs1f", | |
| "fs2", "fs2f", "fs3", "fs3f", "fs4", "fs4f", "fs5", "fs5f", | |
| }; | |
| static const char * const mips_fpr_names_eabi64[32] = | |
| { | |
| "fv0", "fv1", "ft0", "ft1", "ft2", "ft3", "ft4", "ft5", | |
| "ft6", "ft7", "ft8", "ft9", "fa0", "fa1", "fa2", "fa3", | |
| "fa4", "fa5", "fa6", "fa7", "fs0", "fs1", "fs2", "fs3", | |
| "fs4", "fs5", "fs6", "fs7", "fs8", "fs9", "fs10", "fs11", | |
| }; | |
| static const char * const mips_cp0_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_cp1_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_cp0_names_r3900[32] = | |
| { | |
| "$0", "$1", "$2", "c0_config", | |
| "$4", "$5", "$6", "c0_cache", | |
| "c0_badvaddr", "$9", "$10", "$11", | |
| "c0_sr", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_debug", "c0_depc", "$18", "$19", | |
| "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", | |
| "$28", "$29", "$30", "$31", | |
| }; | |
| static const char * const mips_cp0_names_r3000[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo", "$3", | |
| "c0_context", "$5", "$6", "$7", | |
| "c0_badvaddr", "$9", "c0_entryhi", "$11", | |
| "c0_sr", "c0_cause", "c0_epc", "c0_prid", | |
| "$16", "$17", "$18", "$19", | |
| "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", | |
| "$28", "$29", "$30", "$31", | |
| }; | |
| static const char * const mips_cp0_names_r4000[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_sr", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "$23", | |
| "$24", "$25", "c0_ecc", "c0_cacheerr", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "$31", | |
| }; | |
| static const char * const mips_cp0_names_r5900[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_sr", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "$17", "$18", "$19", | |
| "$20", "$21", "$22", "c0_badpaddr", | |
| "c0_depc", "c0_perfcnt", "$26", "$27", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "$31" | |
| }; | |
| static const char * const mips_cp0_names_mips3264[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", | |
| }; | |
| static const char * const mips_cp1_names_mips[32] = | |
| { | |
| "c1_fir", "$1", "$2", "$3", | |
| "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", | |
| "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", | |
| "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", | |
| "$28", "$29", "$30", "c1_fcsr" | |
| }; | |
| static const char * const mips_cp1_names_mips3264[32] = | |
| { | |
| "c1_fir", "c1_ufr", "$2", "$3", | |
| "c1_unfr", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", | |
| "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", | |
| "$20", "$21", "$22", "$23", | |
| "$24", "c1_fccr", "c1_fexr", "$27", | |
| "c1_fenr", "$29", "$30", "c1_fcsr" | |
| }; | |
| static const struct mips_cp0sel_name mips_cp0sel_names_mips3264[] = | |
| { | |
| { 16, 1, "c0_config1" }, | |
| { 16, 2, "c0_config2" }, | |
| { 16, 3, "c0_config3" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 18, 2, "c0_watchlo,2" }, | |
| { 18, 3, "c0_watchlo,3" }, | |
| { 18, 4, "c0_watchlo,4" }, | |
| { 18, 5, "c0_watchlo,5" }, | |
| { 18, 6, "c0_watchlo,6" }, | |
| { 18, 7, "c0_watchlo,7" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 19, 2, "c0_watchhi,2" }, | |
| { 19, 3, "c0_watchhi,3" }, | |
| { 19, 4, "c0_watchhi,4" }, | |
| { 19, 5, "c0_watchhi,5" }, | |
| { 19, 6, "c0_watchhi,6" }, | |
| { 19, 7, "c0_watchhi,7" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 27, 1, "c0_cacheerr,1" }, | |
| { 27, 2, "c0_cacheerr,2" }, | |
| { 27, 3, "c0_cacheerr,3" }, | |
| { 28, 1, "c0_datalo" }, | |
| { 29, 1, "c0_datahi" } | |
| }; | |
| static const char * const mips_cp0_names_mips3264r2[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "c0_hwrena", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", | |
| "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", | |
| }; | |
| static const struct mips_cp0sel_name mips_cp0sel_names_mips3264r2[] = | |
| { | |
| { 4, 1, "c0_contextconfig" }, | |
| { 0, 1, "c0_mvpcontrol" }, | |
| { 0, 2, "c0_mvpconf0" }, | |
| { 0, 3, "c0_mvpconf1" }, | |
| { 1, 1, "c0_vpecontrol" }, | |
| { 1, 2, "c0_vpeconf0" }, | |
| { 1, 3, "c0_vpeconf1" }, | |
| { 1, 4, "c0_yqmask" }, | |
| { 1, 5, "c0_vpeschedule" }, | |
| { 1, 6, "c0_vpeschefback" }, | |
| { 2, 1, "c0_tcstatus" }, | |
| { 2, 2, "c0_tcbind" }, | |
| { 2, 3, "c0_tcrestart" }, | |
| { 2, 4, "c0_tchalt" }, | |
| { 2, 5, "c0_tccontext" }, | |
| { 2, 6, "c0_tcschedule" }, | |
| { 2, 7, "c0_tcschefback" }, | |
| { 5, 1, "c0_pagegrain" }, | |
| { 6, 1, "c0_srsconf0" }, | |
| { 6, 2, "c0_srsconf1" }, | |
| { 6, 3, "c0_srsconf2" }, | |
| { 6, 4, "c0_srsconf3" }, | |
| { 6, 5, "c0_srsconf4" }, | |
| { 12, 1, "c0_intctl" }, | |
| { 12, 2, "c0_srsctl" }, | |
| { 12, 3, "c0_srsmap" }, | |
| { 15, 1, "c0_ebase" }, | |
| { 16, 1, "c0_config1" }, | |
| { 16, 2, "c0_config2" }, | |
| { 16, 3, "c0_config3" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 18, 2, "c0_watchlo,2" }, | |
| { 18, 3, "c0_watchlo,3" }, | |
| { 18, 4, "c0_watchlo,4" }, | |
| { 18, 5, "c0_watchlo,5" }, | |
| { 18, 6, "c0_watchlo,6" }, | |
| { 18, 7, "c0_watchlo,7" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 19, 2, "c0_watchhi,2" }, | |
| { 19, 3, "c0_watchhi,3" }, | |
| { 19, 4, "c0_watchhi,4" }, | |
| { 19, 5, "c0_watchhi,5" }, | |
| { 19, 6, "c0_watchhi,6" }, | |
| { 19, 7, "c0_watchhi,7" }, | |
| { 23, 1, "c0_tracecontrol" }, | |
| { 23, 2, "c0_tracecontrol2" }, | |
| { 23, 3, "c0_usertracedata" }, | |
| { 23, 4, "c0_tracebpc" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 27, 1, "c0_cacheerr,1" }, | |
| { 27, 2, "c0_cacheerr,2" }, | |
| { 27, 3, "c0_cacheerr,3" }, | |
| { 28, 1, "c0_datalo" }, | |
| { 28, 2, "c0_taglo1" }, | |
| { 28, 3, "c0_datalo1" }, | |
| { 28, 4, "c0_taglo2" }, | |
| { 28, 5, "c0_datalo2" }, | |
| { 28, 6, "c0_taglo3" }, | |
| { 28, 7, "c0_datalo3" }, | |
| { 29, 1, "c0_datahi" }, | |
| { 29, 2, "c0_taghi1" }, | |
| { 29, 3, "c0_datahi1" }, | |
| { 29, 4, "c0_taghi2" }, | |
| { 29, 5, "c0_datahi2" }, | |
| { 29, 6, "c0_taghi3" }, | |
| { 29, 7, "c0_datahi3" }, | |
| }; | |
| /* SB-1: MIPS64 (mips_cp0_names_mips3264) with minor mods. */ | |
| static const char * const mips_cp0_names_sb1[32] = | |
| { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", | |
| "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", | |
| }; | |
| static const struct mips_cp0sel_name mips_cp0sel_names_sb1[] = | |
| { | |
| { 16, 1, "c0_config1" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 22, 0, "c0_perftrace" }, | |
| { 23, 3, "c0_edebug" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 26, 1, "c0_buserr_pa" }, | |
| { 27, 1, "c0_cacheerr_d" }, | |
| { 27, 3, "c0_cacheerr_d_pa" }, | |
| { 28, 1, "c0_datalo_i" }, | |
| { 28, 2, "c0_taglo_d" }, | |
| { 28, 3, "c0_datalo_d" }, | |
| { 29, 1, "c0_datahi_i" }, | |
| { 29, 2, "c0_taghi_d" }, | |
| { 29, 3, "c0_datahi_d" }, | |
| }; | |
| /* Xlr cop0 register names. */ | |
| static const char * const mips_cp0_names_xlr[32] = { | |
| "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", | |
| "c0_context", "c0_pagemask", "c0_wired", "$7", | |
| "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", | |
| "c0_status", "c0_cause", "c0_epc", "c0_prid", | |
| "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", | |
| "c0_xcontext", "$21", "$22", "c0_debug", | |
| "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", | |
| "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", | |
| }; | |
| /* XLR's CP0 Select Registers. */ | |
| static const struct mips_cp0sel_name mips_cp0sel_names_xlr[] = { | |
| { 9, 6, "c0_extintreq" }, | |
| { 9, 7, "c0_extintmask" }, | |
| { 15, 1, "c0_ebase" }, | |
| { 16, 1, "c0_config1" }, | |
| { 16, 2, "c0_config2" }, | |
| { 16, 3, "c0_config3" }, | |
| { 16, 7, "c0_procid2" }, | |
| { 18, 1, "c0_watchlo,1" }, | |
| { 18, 2, "c0_watchlo,2" }, | |
| { 18, 3, "c0_watchlo,3" }, | |
| { 18, 4, "c0_watchlo,4" }, | |
| { 18, 5, "c0_watchlo,5" }, | |
| { 18, 6, "c0_watchlo,6" }, | |
| { 18, 7, "c0_watchlo,7" }, | |
| { 19, 1, "c0_watchhi,1" }, | |
| { 19, 2, "c0_watchhi,2" }, | |
| { 19, 3, "c0_watchhi,3" }, | |
| { 19, 4, "c0_watchhi,4" }, | |
| { 19, 5, "c0_watchhi,5" }, | |
| { 19, 6, "c0_watchhi,6" }, | |
| { 19, 7, "c0_watchhi,7" }, | |
| { 25, 1, "c0_perfcnt,1" }, | |
| { 25, 2, "c0_perfcnt,2" }, | |
| { 25, 3, "c0_perfcnt,3" }, | |
| { 25, 4, "c0_perfcnt,4" }, | |
| { 25, 5, "c0_perfcnt,5" }, | |
| { 25, 6, "c0_perfcnt,6" }, | |
| { 25, 7, "c0_perfcnt,7" }, | |
| { 27, 1, "c0_cacheerr,1" }, | |
| { 27, 2, "c0_cacheerr,2" }, | |
| { 27, 3, "c0_cacheerr,3" }, | |
| { 28, 1, "c0_datalo" }, | |
| { 29, 1, "c0_datahi" } | |
| }; | |
| static const char * const mips_hwr_names_numeric[32] = | |
| { | |
| "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const mips_hwr_names_mips3264r2[32] = | |
| { | |
| "hwr_cpunum", "hwr_synci_step", "hwr_cc", "hwr_ccres", | |
| "$4", "$5", "$6", "$7", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| static const char * const msa_control_names[32] = | |
| { | |
| "msa_ir", "msa_csr", "msa_access", "msa_save", | |
| "msa_modify", "msa_request", "msa_map", "msa_unmap", | |
| "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", | |
| "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", | |
| "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" | |
| }; | |
| struct mips_abi_choice | |
| { | |
| const char * name; | |
| const char * const *gpr_names; | |
| const char * const *fpr_names; | |
| }; | |
| struct mips_abi_choice mips_abi_choices[] = | |
| { | |
| { "numeric", mips_gpr_names_numeric, mips_fpr_names_numeric }, | |
| { "32", mips_gpr_names_oldabi, mips_fpr_names_32 }, | |
| { "o64", mips_gpr_names_oldabi, mips_fpr_names_o64 }, | |
| { "n32", mips_gpr_names_newabi, mips_fpr_names_n32 }, | |
| { "64", mips_gpr_names_newabi, mips_fpr_names_64 }, | |
| { "eabi32", mips_gpr_names_newabi, mips_fpr_names_eabi32 }, | |
| { "eabi64", mips_gpr_names_newabi, mips_fpr_names_eabi64 }, | |
| }; | |
| struct mips_arch_choice | |
| { | |
| const char *name; | |
| int bfd_mach_valid; | |
| unsigned long bfd_mach; | |
| int processor; | |
| int isa; | |
| int ase; | |
| const char * const *cp0_names; | |
| const struct mips_cp0sel_name *cp0sel_names; | |
| unsigned int cp0sel_names_len; | |
| const char * const *cp1_names; | |
| const char * const *hwr_names; | |
| }; | |
| const struct mips_arch_choice mips_arch_choices[] = | |
| { | |
| { "numeric", 0, 0, 0, 0, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, | |
| mips_hwr_names_numeric }, | |
| { "r3000", 1, bfd_mach_mips3000, CPU_R3000, ISA_MIPS1, 0, | |
| mips_cp0_names_r3000, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r3900", 1, bfd_mach_mips3900, CPU_R3900, ISA_MIPS1, 0, | |
| mips_cp0_names_r3900, NULL, 0, mips_cp1_names_numeric, | |
| mips_hwr_names_numeric }, | |
| { "r4000", 1, bfd_mach_mips4000, CPU_R4000, ISA_MIPS3, 0, | |
| mips_cp0_names_r4000, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r4010", 1, bfd_mach_mips4010, CPU_R4010, ISA_MIPS2, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "allegrex", 1, bfd_mach_mips_allegrex, CPU_ALLEGREX, ISA_MIPS2, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, | |
| mips_hwr_names_numeric }, | |
| { "vr4100", 1, bfd_mach_mips4100, CPU_VR4100, ISA_MIPS3, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "vr4111", 1, bfd_mach_mips4111, CPU_R4111, ISA_MIPS3, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "vr4120", 1, bfd_mach_mips4120, CPU_VR4120, ISA_MIPS3, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r4300", 1, bfd_mach_mips4300, CPU_R4300, ISA_MIPS3, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r4400", 1, bfd_mach_mips4400, CPU_R4400, ISA_MIPS3, 0, | |
| mips_cp0_names_r4000, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r4600", 1, bfd_mach_mips4600, CPU_R4600, ISA_MIPS3, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r4650", 1, bfd_mach_mips4650, CPU_R4650, ISA_MIPS3, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r5000", 1, bfd_mach_mips5000, CPU_R5000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "vr5400", 1, bfd_mach_mips5400, CPU_VR5400, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "vr5500", 1, bfd_mach_mips5500, CPU_VR5500, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r5900", 1, bfd_mach_mips5900, CPU_R5900, ISA_MIPS3, 0, | |
| mips_cp0_names_r5900, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r6000", 1, bfd_mach_mips6000, CPU_R6000, ISA_MIPS2, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "rm7000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "rm9000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r8000", 1, bfd_mach_mips8000, CPU_R8000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r10000", 1, bfd_mach_mips10000, CPU_R10000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r12000", 1, bfd_mach_mips12000, CPU_R12000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r14000", 1, bfd_mach_mips14000, CPU_R14000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "r16000", 1, bfd_mach_mips16000, CPU_R16000, ISA_MIPS4, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| { "mips5", 1, bfd_mach_mips5, CPU_MIPS5, ISA_MIPS5, 0, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips, | |
| mips_hwr_names_numeric }, | |
| /* For stock MIPS32, disassemble all applicable MIPS-specified ASEs. | |
| Note that MIPS-3D and MDMX are not applicable to MIPS32. (See | |
| _MIPS32 Architecture For Programmers Volume I: Introduction to the | |
| MIPS32 Architecture_ (MIPS Document Number MD00082, Revision 0.95), | |
| page 1. */ | |
| { "mips32", 1, bfd_mach_mipsisa32, CPU_MIPS32, | |
| ISA_MIPS32, ASE_SMARTMIPS, | |
| mips_cp0_names_mips3264, | |
| mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), | |
| mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "mips32r2", 1, bfd_mach_mipsisa32r2, CPU_MIPS32R2, | |
| ISA_MIPS32R2, | |
| (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D | |
| | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA | ASE_XPA), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "mips32r3", 1, bfd_mach_mipsisa32r3, CPU_MIPS32R3, | |
| ISA_MIPS32R3, | |
| (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D | |
| | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA | ASE_XPA), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "mips32r5", 1, bfd_mach_mipsisa32r5, CPU_MIPS32R5, | |
| ISA_MIPS32R5, | |
| (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D | |
| | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA | ASE_XPA), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "mips32r6", 1, bfd_mach_mipsisa32r6, CPU_MIPS32R6, | |
| ISA_MIPS32R6, | |
| (ASE_EVA | ASE_MSA | ASE_VIRT | ASE_XPA | ASE_MCU | ASE_MT | ASE_DSP | |
| | ASE_DSPR2 | ASE_DSPR3 | ASE_CRC | ASE_GINV), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| /* For stock MIPS64, disassemble all applicable MIPS-specified ASEs. */ | |
| { "mips64", 1, bfd_mach_mipsisa64, CPU_MIPS64, | |
| ISA_MIPS64, ASE_MIPS3D | ASE_MDMX, | |
| mips_cp0_names_mips3264, | |
| mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), | |
| mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "mips64r2", 1, bfd_mach_mipsisa64r2, CPU_MIPS64R2, | |
| ISA_MIPS64R2, | |
| (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT | |
| | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64 | ASE_XPA), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "mips64r3", 1, bfd_mach_mipsisa64r3, CPU_MIPS64R3, | |
| ISA_MIPS64R3, | |
| (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT | |
| | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64 | ASE_XPA), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "mips64r5", 1, bfd_mach_mipsisa64r5, CPU_MIPS64R5, | |
| ISA_MIPS64R5, | |
| (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT | |
| | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64 | ASE_XPA), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "mips64r6", 1, bfd_mach_mipsisa64r6, CPU_MIPS64R6, | |
| ISA_MIPS64R6, | |
| (ASE_EVA | ASE_MSA | ASE_MSA64 | ASE_XPA | ASE_VIRT | ASE_VIRT64 | |
| | ASE_MCU | ASE_MT | ASE_DSP | ASE_DSPR2 | ASE_DSPR3 | ASE_CRC | |
| | ASE_CRC64 | ASE_GINV), | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "interaptiv-mr2", 1, bfd_mach_mips_interaptiv_mr2, CPU_INTERAPTIV_MR2, | |
| ISA_MIPS32R3, | |
| ASE_MT | ASE_EVA | ASE_DSP | ASE_DSPR2 | ASE_MIPS16E2 | ASE_MIPS16E2_MT, | |
| mips_cp0_names_mips3264r2, | |
| mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), | |
| mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, | |
| { "sb1", 1, bfd_mach_mips_sb1, CPU_SB1, | |
| ISA_MIPS64 | INSN_SB1, ASE_MIPS3D, | |
| mips_cp0_names_sb1, | |
| mips_cp0sel_names_sb1, ARRAY_SIZE (mips_cp0sel_names_sb1), | |
| mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "loongson2e", 1, bfd_mach_mips_loongson_2e, CPU_LOONGSON_2E, | |
| ISA_MIPS3 | INSN_LOONGSON_2E, 0, mips_cp0_names_numeric, | |
| NULL, 0, mips_cp1_names_mips, mips_hwr_names_numeric }, | |
| { "loongson2f", 1, bfd_mach_mips_loongson_2f, CPU_LOONGSON_2F, | |
| ISA_MIPS3 | INSN_LOONGSON_2F, ASE_LOONGSON_MMI, mips_cp0_names_numeric, | |
| NULL, 0, mips_cp1_names_mips, mips_hwr_names_numeric }, | |
| /* The loongson3a is an alias of gs464 for compatibility */ | |
| { "loongson3a", 1, bfd_mach_mips_gs464, CPU_GS464, | |
| ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips3264, | |
| mips_hwr_names_numeric }, | |
| { "gs464", 1, bfd_mach_mips_gs464, CPU_GS464, | |
| ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips3264, | |
| mips_hwr_names_numeric }, | |
| { "gs464e", 1, bfd_mach_mips_gs464e, CPU_GS464E, | |
| ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT | |
| | ASE_LOONGSON_EXT2, mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips3264, | |
| mips_hwr_names_numeric }, | |
| { "gs264e", 1, bfd_mach_mips_gs264e, CPU_GS264E, | |
| ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT | |
| | ASE_LOONGSON_EXT2 | ASE_MSA | ASE_MSA64, mips_cp0_names_numeric, NULL, | |
| 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "octeon", 1, bfd_mach_mips_octeon, CPU_OCTEON, | |
| ISA_MIPS64R2 | INSN_OCTEON, 0, mips_cp0_names_numeric, NULL, 0, | |
| mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "octeon+", 1, bfd_mach_mips_octeonp, CPU_OCTEONP, | |
| ISA_MIPS64R2 | INSN_OCTEONP, 0, mips_cp0_names_numeric, | |
| NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "octeon2", 1, bfd_mach_mips_octeon2, CPU_OCTEON2, | |
| ISA_MIPS64R2 | INSN_OCTEON2, 0, mips_cp0_names_numeric, | |
| NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "octeon3", 1, bfd_mach_mips_octeon3, CPU_OCTEON3, | |
| ISA_MIPS64R5 | INSN_OCTEON3, ASE_VIRT | ASE_VIRT64, | |
| mips_cp0_names_numeric, | |
| NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| { "xlr", 1, bfd_mach_mips_xlr, CPU_XLR, | |
| ISA_MIPS64 | INSN_XLR, 0, | |
| mips_cp0_names_xlr, | |
| mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), | |
| mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| /* XLP is mostly like XLR, with the prominent exception it is being | |
| MIPS64R2. */ | |
| { "xlp", 1, bfd_mach_mips_xlr, CPU_XLR, | |
| ISA_MIPS64R2 | INSN_XLR, 0, | |
| mips_cp0_names_xlr, | |
| mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), | |
| mips_cp1_names_mips3264, mips_hwr_names_numeric }, | |
| /* This entry, mips16, is here only for ISA/processor selection; do | |
| not print its name. */ | |
| { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS64, | |
| ASE_MIPS16E2 | ASE_MIPS16E2_MT, | |
| mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, | |
| mips_hwr_names_numeric }, | |
| }; | |
| /* ISA and processor type to disassemble for, and register names to use. | |
| set_default_mips_dis_options and parse_mips_dis_options fill in these | |
| values. */ | |
| static int mips_processor; | |
| static int mips_isa; | |
| static int mips_ase; | |
| static int micromips_ase; | |
| static const char * const *mips_gpr_names; | |
| static const char * const *mips_fpr_names; | |
| static const char * const *mips_cp0_names; | |
| static const struct mips_cp0sel_name *mips_cp0sel_names; | |
| static int mips_cp0sel_names_len; | |
| static const char * const *mips_cp1_names; | |
| static const char * const *mips_hwr_names; | |
| /* Other options */ | |
| static int no_aliases; /* If set disassemble as most general inst. */ | |
| static const struct mips_abi_choice * | |
| choose_abi_by_name (const char *name, unsigned int namelen) | |
| { | |
| const struct mips_abi_choice *c; | |
| unsigned int i; | |
| for (i = 0, c = NULL; i < ARRAY_SIZE (mips_abi_choices) && c == NULL; i++) | |
| if (strncmp (mips_abi_choices[i].name, name, namelen) == 0 | |
| && strlen (mips_abi_choices[i].name) == namelen) | |
| c = &mips_abi_choices[i]; | |
| return c; | |
| } | |
| static const struct mips_arch_choice * | |
| choose_arch_by_name (const char *name, unsigned int namelen) | |
| { | |
| const struct mips_arch_choice *c = NULL; | |
| unsigned int i; | |
| for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) | |
| if (strncmp (mips_arch_choices[i].name, name, namelen) == 0 | |
| && strlen (mips_arch_choices[i].name) == namelen) | |
| c = &mips_arch_choices[i]; | |
| return c; | |
| } | |
| static const struct mips_arch_choice * | |
| choose_arch_by_number (unsigned long mach) | |
| { | |
| static unsigned long hint_bfd_mach; | |
| static const struct mips_arch_choice *hint_arch_choice; | |
| const struct mips_arch_choice *c; | |
| unsigned int i; | |
| /* We optimize this because even if the user specifies no | |
| flags, this will be done for every instruction! */ | |
| if (hint_bfd_mach == mach | |
| && hint_arch_choice != NULL | |
| && hint_arch_choice->bfd_mach == hint_bfd_mach) | |
| return hint_arch_choice; | |
| for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) | |
| { | |
| if (mips_arch_choices[i].bfd_mach_valid | |
| && mips_arch_choices[i].bfd_mach == mach) | |
| { | |
| c = &mips_arch_choices[i]; | |
| hint_bfd_mach = mach; | |
| hint_arch_choice = c; | |
| } | |
| } | |
| return c; | |
| } | |
| /* Check if the object uses NewABI conventions. */ | |
| static int | |
| is_newabi (Elf_Internal_Ehdr *header) | |
| { | |
| /* There are no old-style ABIs which use 64-bit ELF. */ | |
| if (header->e_ident[EI_CLASS] == ELFCLASS64) | |
| return 1; | |
| /* If a 32-bit ELF file, n32 is a new-style ABI. */ | |
| if ((header->e_flags & EF_MIPS_ABI2) != 0) | |
| return 1; | |
| return 0; | |
| } | |
| /* Check if the object has microMIPS ASE code. */ | |
| static int | |
| is_micromips (Elf_Internal_Ehdr *header) | |
| { | |
| if ((header->e_flags & EF_MIPS_ARCH_ASE_MICROMIPS) != 0) | |
| return 1; | |
| return 0; | |
| } | |
| /* Convert ASE flags from .MIPS.abiflags to internal values. */ | |
| static unsigned long | |
| mips_convert_abiflags_ases (unsigned long afl_ases) | |
| { | |
| unsigned long opcode_ases = 0; | |
| if (afl_ases & AFL_ASE_DSP) | |
| opcode_ases |= ASE_DSP; | |
| if (afl_ases & AFL_ASE_DSPR2) | |
| opcode_ases |= ASE_DSPR2; | |
| if (afl_ases & AFL_ASE_EVA) | |
| opcode_ases |= ASE_EVA; | |
| if (afl_ases & AFL_ASE_MCU) | |
| opcode_ases |= ASE_MCU; | |
| if (afl_ases & AFL_ASE_MDMX) | |
| opcode_ases |= ASE_MDMX; | |
| if (afl_ases & AFL_ASE_MIPS3D) | |
| opcode_ases |= ASE_MIPS3D; | |
| if (afl_ases & AFL_ASE_MT) | |
| opcode_ases |= ASE_MT; | |
| if (afl_ases & AFL_ASE_SMARTMIPS) | |
| opcode_ases |= ASE_SMARTMIPS; | |
| if (afl_ases & AFL_ASE_VIRT) | |
| opcode_ases |= ASE_VIRT; | |
| if (afl_ases & AFL_ASE_MSA) | |
| opcode_ases |= ASE_MSA; | |
| if (afl_ases & AFL_ASE_XPA) | |
| opcode_ases |= ASE_XPA; | |
| if (afl_ases & AFL_ASE_DSPR3) | |
| opcode_ases |= ASE_DSPR3; | |
| if (afl_ases & AFL_ASE_MIPS16E2) | |
| opcode_ases |= ASE_MIPS16E2; | |
| return opcode_ases; | |
| } | |
| /* Calculate combination ASE flags from regular ASE flags. */ | |
| static unsigned long | |
| mips_calculate_combination_ases (int opcode_isa, unsigned long opcode_ases) | |
| { | |
| unsigned long combination_ases = 0; | |
| if ((opcode_ases & (ASE_XPA | ASE_VIRT)) == (ASE_XPA | ASE_VIRT)) | |
| combination_ases |= ASE_XPA_VIRT; | |
| if ((opcode_ases & (ASE_MIPS16E2 | ASE_MT)) == (ASE_MIPS16E2 | ASE_MT)) | |
| combination_ases |= ASE_MIPS16E2_MT; | |
| if ((opcode_ases & ASE_EVA) | |
| && ((opcode_isa & INSN_ISA_MASK) == ISA_MIPS64R6 | |
| || (opcode_isa & INSN_ISA_MASK) == ISA_MIPS32R6)) | |
| combination_ases |= ASE_EVA_R6; | |
| return combination_ases; | |
| } | |
| static void | |
| set_default_mips_dis_options (struct disassemble_info *info) | |
| { | |
| const struct mips_arch_choice *chosen_arch; | |
| /* Defaults: mipsIII/r3000 (?!), no microMIPS ASE (any compressed code | |
| is MIPS16 ASE) (o)32-style ("oldabi") GPR names, and numeric FPR, | |
| CP0 register, and HWR names. */ | |
| mips_isa = ISA_MIPS3; | |
| mips_processor = CPU_R3000; | |
| micromips_ase = 0; | |
| mips_ase = 0; | |
| mips_gpr_names = mips_gpr_names_oldabi; | |
| mips_fpr_names = mips_fpr_names_numeric; | |
| mips_cp0_names = mips_cp0_names_numeric; | |
| mips_cp0sel_names = NULL; | |
| mips_cp0sel_names_len = 0; | |
| mips_cp1_names = mips_cp1_names_numeric; | |
| mips_hwr_names = mips_hwr_names_numeric; | |
| no_aliases = 0; | |
| /* Set ISA, architecture, and cp0 register names as best we can. */ | |
| #if ! SYMTAB_AVAILABLE | |
| /* This is running out on a target machine, not in a host tool. | |
| FIXME: Where does mips_target_info come from? */ | |
| target_processor = mips_target_info.processor; | |
| mips_isa = mips_target_info.isa; | |
| mips_ase = mips_target_info.ase; | |
| #else | |
| chosen_arch = choose_arch_by_number (info->mach); | |
| if (chosen_arch != NULL) | |
| { | |
| mips_processor = chosen_arch->processor; | |
| mips_isa = chosen_arch->isa; | |
| mips_ase = chosen_arch->ase; | |
| mips_cp0_names = chosen_arch->cp0_names; | |
| mips_cp0sel_names = chosen_arch->cp0sel_names; | |
| mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; | |
| mips_cp1_names = chosen_arch->cp1_names; | |
| mips_hwr_names = chosen_arch->hwr_names; | |
| } | |
| /* Update settings according to the ELF file header flags. */ | |
| if (info->flavour == bfd_target_elf_flavour && info->section != NULL) | |
| { | |
| struct bfd *abfd = info->section->owner; | |
| Elf_Internal_Ehdr *header = elf_elfheader (abfd); | |
| Elf_Internal_ABIFlags_v0 *abiflags = NULL; | |
| /* We won't ever get here if !HAVE_BFD_MIPS_ELF_GET_ABIFLAGS, | |
| because we won't then have a MIPS/ELF BFD, however we need | |
| to guard against a link error in a `--enable-targets=...' | |
| configuration with a 32-bit host where the MIPS target is | |
| a secondary, or with MIPS/ECOFF configurations. */ | |
| #ifdef HAVE_BFD_MIPS_ELF_GET_ABIFLAGS | |
| abiflags = bfd_mips_elf_get_abiflags (abfd); | |
| #endif | |
| /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */ | |
| if (is_newabi (header)) | |
| mips_gpr_names = mips_gpr_names_newabi; | |
| /* If a microMIPS binary, then don't use MIPS16 bindings. */ | |
| micromips_ase = is_micromips (header); | |
| /* OR in any extra ASE flags set in ELF file structures. */ | |
| if (abiflags) | |
| mips_ase |= mips_convert_abiflags_ases (abiflags->ases); | |
| else if (header->e_flags & EF_MIPS_ARCH_ASE_MDMX) | |
| mips_ase |= ASE_MDMX; | |
| } | |
| #endif | |
| mips_ase |= mips_calculate_combination_ases (mips_isa, mips_ase); | |
| } | |
| /* Parse an ASE disassembler option and set the corresponding global | |
| ASE flag(s). Return TRUE if successful, FALSE otherwise. */ | |
| static bool | |
| parse_mips_ase_option (const char *option) | |
| { | |
| if (startswith (option, "msa")) | |
| { | |
| mips_ase |= ASE_MSA; | |
| if ((mips_isa & INSN_ISA_MASK) == ISA_MIPS64R2 | |
| || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R3 | |
| || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R5 | |
| || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R6) | |
| mips_ase |= ASE_MSA64; | |
| return true; | |
| } | |
| if (startswith (option, "virt")) | |
| { | |
| mips_ase |= ASE_VIRT; | |
| if (mips_isa & ISA_MIPS64R2 | |
| || mips_isa & ISA_MIPS64R3 | |
| || mips_isa & ISA_MIPS64R5 | |
| || mips_isa & ISA_MIPS64R6) | |
| mips_ase |= ASE_VIRT64; | |
| return true; | |
| } | |
| if (startswith (option, "xpa")) | |
| { | |
| mips_ase |= ASE_XPA; | |
| return true; | |
| } | |
| if (startswith (option, "ginv")) | |
| { | |
| mips_ase |= ASE_GINV; | |
| return true; | |
| } | |
| if (startswith (option, "loongson-mmi")) | |
| { | |
| mips_ase |= ASE_LOONGSON_MMI; | |
| return true; | |
| } | |
| if (startswith (option, "loongson-cam")) | |
| { | |
| mips_ase |= ASE_LOONGSON_CAM; | |
| return true; | |
| } | |
| /* Put here for match ext2 frist */ | |
| if (startswith (option, "loongson-ext2")) | |
| { | |
| mips_ase |= ASE_LOONGSON_EXT2; | |
| return true; | |
| } | |
| if (startswith (option, "loongson-ext")) | |
| { | |
| mips_ase |= ASE_LOONGSON_EXT; | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void | |
| parse_mips_dis_option (const char *option, unsigned int len) | |
| { | |
| unsigned int i, optionlen, vallen; | |
| const char *val; | |
| const struct mips_abi_choice *chosen_abi; | |
| const struct mips_arch_choice *chosen_arch; | |
| /* Try to match options that are simple flags */ | |
| if (startswith (option, "no-aliases")) | |
| { | |
| no_aliases = 1; | |
| return; | |
| } | |
| if (parse_mips_ase_option (option)) | |
| { | |
| mips_ase |= mips_calculate_combination_ases (mips_isa, mips_ase); | |
| return; | |
| } | |
| /* Look for the = that delimits the end of the option name. */ | |
| for (i = 0; i < len; i++) | |
| if (option[i] == '=') | |
| break; | |
| if (i == 0) /* Invalid option: no name before '='. */ | |
| return; | |
| if (i == len) /* Invalid option: no '='. */ | |
| return; | |
| if (i == (len - 1)) /* Invalid option: no value after '='. */ | |
| return; | |
| optionlen = i; | |
| val = option + (optionlen + 1); | |
| vallen = len - (optionlen + 1); | |
| if (strncmp ("gpr-names", option, optionlen) == 0 | |
| && strlen ("gpr-names") == optionlen) | |
| { | |
| chosen_abi = choose_abi_by_name (val, vallen); | |
| if (chosen_abi != NULL) | |
| mips_gpr_names = chosen_abi->gpr_names; | |
| return; | |
| } | |
| if (strncmp ("fpr-names", option, optionlen) == 0 | |
| && strlen ("fpr-names") == optionlen) | |
| { | |
| chosen_abi = choose_abi_by_name (val, vallen); | |
| if (chosen_abi != NULL) | |
| mips_fpr_names = chosen_abi->fpr_names; | |
| return; | |
| } | |
| if (strncmp ("cp0-names", option, optionlen) == 0 | |
| && strlen ("cp0-names") == optionlen) | |
| { | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| { | |
| mips_cp0_names = chosen_arch->cp0_names; | |
| mips_cp0sel_names = chosen_arch->cp0sel_names; | |
| mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; | |
| } | |
| return; | |
| } | |
| if (strncmp ("cp1-names", option, optionlen) == 0 | |
| && strlen ("cp1-names") == optionlen) | |
| { | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| mips_cp1_names = chosen_arch->cp1_names; | |
| return; | |
| } | |
| if (strncmp ("hwr-names", option, optionlen) == 0 | |
| && strlen ("hwr-names") == optionlen) | |
| { | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| mips_hwr_names = chosen_arch->hwr_names; | |
| return; | |
| } | |
| if (strncmp ("reg-names", option, optionlen) == 0 | |
| && strlen ("reg-names") == optionlen) | |
| { | |
| /* We check both ABI and ARCH here unconditionally, so | |
| that "numeric" will do the desirable thing: select | |
| numeric register names for all registers. Other than | |
| that, a given name probably won't match both. */ | |
| chosen_abi = choose_abi_by_name (val, vallen); | |
| if (chosen_abi != NULL) | |
| { | |
| mips_gpr_names = chosen_abi->gpr_names; | |
| mips_fpr_names = chosen_abi->fpr_names; | |
| } | |
| chosen_arch = choose_arch_by_name (val, vallen); | |
| if (chosen_arch != NULL) | |
| { | |
| mips_cp0_names = chosen_arch->cp0_names; | |
| mips_cp0sel_names = chosen_arch->cp0sel_names; | |
| mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; | |
| mips_cp1_names = chosen_arch->cp1_names; | |
| mips_hwr_names = chosen_arch->hwr_names; | |
| } | |
| return; | |
| } | |
| /* Invalid option. */ | |
| } | |
| static void | |
| parse_mips_dis_options (const char *options) | |
| { | |
| const char *option_end; | |
| if (options == NULL) | |
| return; | |
| while (*options != '\0') | |
| { | |
| /* Skip empty options. */ | |
| if (*options == ',') | |
| { | |
| options++; | |
| continue; | |
| } | |
| /* We know that *options is neither NUL or a comma. */ | |
| option_end = options + 1; | |
| while (*option_end != ',' && *option_end != '\0') | |
| option_end++; | |
| parse_mips_dis_option (options, option_end - options); | |
| /* Go on to the next one. If option_end points to a comma, it | |
| will be skipped above. */ | |
| options = option_end; | |
| } | |
| } | |
| static const struct mips_cp0sel_name * | |
| lookup_mips_cp0sel_name (const struct mips_cp0sel_name *names, | |
| unsigned int len, | |
| unsigned int cp0reg, | |
| unsigned int sel) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < len; i++) | |
| if (names[i].cp0reg == cp0reg && names[i].sel == sel) | |
| return &names[i]; | |
| return NULL; | |
| } | |
| /* Print register REGNO, of type TYPE, for instruction OPCODE. */ | |
| static void | |
| print_reg (struct disassemble_info *info, const struct mips_opcode *opcode, | |
| enum mips_reg_operand_type type, int regno) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| switch (type) | |
| { | |
| case OP_REG_GP: | |
| infprintf (info->stream, dis_style_register, "%s", | |
| mips_gpr_names[regno]); | |
| break; | |
| case OP_REG_FP: | |
| infprintf (info->stream, dis_style_register, "%s", | |
| mips_fpr_names[regno]); | |
| break; | |
| case OP_REG_CCC: | |
| if (opcode->pinfo & (FP_D | FP_S)) | |
| infprintf (info->stream, dis_style_register, "$fcc%d", regno); | |
| else | |
| infprintf (info->stream, dis_style_register, "$cc%d", regno); | |
| break; | |
| case OP_REG_VEC: | |
| if (opcode->membership & INSN_5400) | |
| infprintf (info->stream, dis_style_register, "$f%d", regno); | |
| else | |
| infprintf (info->stream, dis_style_register, "$v%d", regno); | |
| break; | |
| case OP_REG_ACC: | |
| infprintf (info->stream, dis_style_register, "$ac%d", regno); | |
| break; | |
| case OP_REG_COPRO: | |
| if (opcode->name[strlen (opcode->name) - 1] == '0') | |
| infprintf (info->stream, dis_style_register, "%s", mips_cp0_names[regno]); | |
| else | |
| infprintf (info->stream, dis_style_register, "$%d", regno); | |
| break; | |
| case OP_REG_CONTROL: | |
| if (opcode->name[strlen (opcode->name) - 1] == '1') | |
| infprintf (info->stream, dis_style_register, "%s", mips_cp1_names[regno]); | |
| else | |
| infprintf (info->stream, dis_style_register, "$%d", regno); | |
| break; | |
| case OP_REG_HW: | |
| infprintf (info->stream, dis_style_register, "%s", mips_hwr_names[regno]); | |
| break; | |
| case OP_REG_VF: | |
| infprintf (info->stream, dis_style_register, "$vf%d", regno); | |
| break; | |
| case OP_REG_VI: | |
| infprintf (info->stream, dis_style_register, "$vi%d", regno); | |
| break; | |
| case OP_REG_R5900_I: | |
| infprintf (info->stream, dis_style_register, "$I"); | |
| break; | |
| case OP_REG_R5900_Q: | |
| infprintf (info->stream, dis_style_register, "$Q"); | |
| break; | |
| case OP_REG_R5900_R: | |
| infprintf (info->stream, dis_style_register, "$R"); | |
| break; | |
| case OP_REG_R5900_ACC: | |
| infprintf (info->stream, dis_style_register, "$ACC"); | |
| break; | |
| case OP_REG_MSA: | |
| infprintf (info->stream, dis_style_register, "$w%d", regno); | |
| break; | |
| case OP_REG_MSA_CTRL: | |
| infprintf (info->stream, dis_style_register, "%s", | |
| msa_control_names[regno]); | |
| break; | |
| } | |
| } | |
| /* Used to track the state carried over from previous operands in | |
| an instruction. */ | |
| struct mips_print_arg_state { | |
| /* The value of the last OP_INT seen. We only use this for OP_MSB, | |
| where the value is known to be unsigned and small. */ | |
| unsigned int last_int; | |
| /* The type and number of the last OP_REG seen. We only use this for | |
| OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG. */ | |
| enum mips_reg_operand_type last_reg_type; | |
| unsigned int last_regno; | |
| unsigned int dest_regno; | |
| unsigned int seen_dest; | |
| }; | |
| /* Initialize STATE for the start of an instruction. */ | |
| static inline void | |
| init_print_arg_state (struct mips_print_arg_state *state) | |
| { | |
| memset (state, 0, sizeof (*state)); | |
| } | |
| /* Print OP_VU0_SUFFIX or OP_VU0_MATCH_SUFFIX operand OPERAND, | |
| whose value is given by UVAL. */ | |
| static void | |
| print_vu0_channel (struct disassemble_info *info, | |
| const struct mips_operand *operand, unsigned int uval, | |
| enum disassembler_style style) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| if (operand->size == 4) | |
| infprintf (info->stream, style, "%s%s%s%s", | |
| uval & 8 ? "x" : "", | |
| uval & 4 ? "y" : "", | |
| uval & 2 ? "z" : "", | |
| uval & 1 ? "w" : ""); | |
| else if (operand->size == 2) | |
| infprintf (info->stream, style, "%c", "xyzw"[uval]); | |
| else | |
| abort (); | |
| } | |
| /* Record information about a register operand. */ | |
| static void | |
| mips_seen_register (struct mips_print_arg_state *state, | |
| unsigned int regno, | |
| enum mips_reg_operand_type reg_type) | |
| { | |
| state->last_reg_type = reg_type; | |
| state->last_regno = regno; | |
| if (!state->seen_dest) | |
| { | |
| state->seen_dest = 1; | |
| state->dest_regno = regno; | |
| } | |
| } | |
| /* Print SAVE/RESTORE instruction operands according to the argument | |
| register mask AMASK, the number of static registers saved NSREG, | |
| the $ra, $s0 and $s1 register specifiers RA, S0 and S1 respectively, | |
| and the frame size FRAME_SIZE. */ | |
| static void | |
| mips_print_save_restore (struct disassemble_info *info, unsigned int amask, | |
| unsigned int nsreg, unsigned int ra, | |
| unsigned int s0, unsigned int s1, | |
| unsigned int frame_size) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| unsigned int nargs, nstatics, smask, i, j; | |
| void *is = info->stream; | |
| const char *sep; | |
| if (amask == MIPS_SVRS_ALL_ARGS) | |
| { | |
| nargs = 4; | |
| nstatics = 0; | |
| } | |
| else if (amask == MIPS_SVRS_ALL_STATICS) | |
| { | |
| nargs = 0; | |
| nstatics = 4; | |
| } | |
| else | |
| { | |
| nargs = amask >> 2; | |
| nstatics = amask & 3; | |
| } | |
| sep = ""; | |
| if (nargs > 0) | |
| { | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[4]); | |
| if (nargs > 1) | |
| infprintf (is, dis_style_register, "-%s", mips_gpr_names[4 + nargs - 1]); | |
| sep = ","; | |
| } | |
| infprintf (is, dis_style_text, "%s", sep); | |
| infprintf (is, dis_style_immediate, "%d", frame_size); | |
| if (ra) /* $ra */ | |
| { | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[31]); | |
| } | |
| smask = 0; | |
| if (s0) /* $s0 */ | |
| smask |= 1 << 0; | |
| if (s1) /* $s1 */ | |
| smask |= 1 << 1; | |
| if (nsreg > 0) /* $s2-$s8 */ | |
| smask |= ((1 << nsreg) - 1) << 2; | |
| for (i = 0; i < 9; i++) | |
| if (smask & (1 << i)) | |
| { | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[i == 8 ? 30 : (16 + i)]); | |
| /* Skip over string of set bits. */ | |
| for (j = i; smask & (2 << j); j++) | |
| continue; | |
| if (j > i) | |
| { | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[j == 8 ? 30 : (16 + j)]); | |
| } | |
| i = j + 1; | |
| } | |
| /* Statics $ax - $a3. */ | |
| if (nstatics == 1) | |
| { | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[7]); | |
| } | |
| else if (nstatics > 0) | |
| { | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[7 - nstatics + 1]); | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[7]); | |
| } | |
| } | |
| /* Print operand OPERAND of OPCODE, using STATE to track inter-operand state. | |
| UVAL is the encoding of the operand (shifted into bit 0) and BASE_PC is | |
| the base address for OP_PCREL operands. */ | |
| static void | |
| print_insn_arg (struct disassemble_info *info, | |
| struct mips_print_arg_state *state, | |
| const struct mips_opcode *opcode, | |
| const struct mips_operand *operand, | |
| bfd_vma base_pc, | |
| unsigned int uval) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| void *is = info->stream; | |
| switch (operand->type) | |
| { | |
| case OP_INT: | |
| { | |
| const struct mips_int_operand *int_op; | |
| int_op = (const struct mips_int_operand *) operand; | |
| uval = mips_decode_int_operand (int_op, uval); | |
| state->last_int = uval; | |
| if (int_op->print_hex) | |
| infprintf (is, dis_style_immediate, "0x%x", uval); | |
| else | |
| infprintf (is, dis_style_immediate, "%d", uval); | |
| } | |
| break; | |
| case OP_MAPPED_INT: | |
| { | |
| const struct mips_mapped_int_operand *mint_op; | |
| mint_op = (const struct mips_mapped_int_operand *) operand; | |
| uval = mint_op->int_map[uval]; | |
| state->last_int = uval; | |
| if (mint_op->print_hex) | |
| infprintf (is, dis_style_immediate, "0x%x", uval); | |
| else | |
| infprintf (is, dis_style_immediate, "%d", uval); | |
| } | |
| break; | |
| case OP_MSB: | |
| { | |
| const struct mips_msb_operand *msb_op; | |
| msb_op = (const struct mips_msb_operand *) operand; | |
| uval += msb_op->bias; | |
| if (msb_op->add_lsb) | |
| uval -= state->last_int; | |
| infprintf (is, dis_style_immediate, "0x%x", uval); | |
| } | |
| break; | |
| case OP_REG: | |
| case OP_OPTIONAL_REG: | |
| { | |
| const struct mips_reg_operand *reg_op; | |
| reg_op = (const struct mips_reg_operand *) operand; | |
| uval = mips_decode_reg_operand (reg_op, uval); | |
| print_reg (info, opcode, reg_op->reg_type, uval); | |
| mips_seen_register (state, uval, reg_op->reg_type); | |
| } | |
| break; | |
| case OP_REG_PAIR: | |
| { | |
| const struct mips_reg_pair_operand *pair_op; | |
| pair_op = (const struct mips_reg_pair_operand *) operand; | |
| print_reg (info, opcode, pair_op->reg_type, | |
| pair_op->reg1_map[uval]); | |
| infprintf (is, dis_style_text, ","); | |
| print_reg (info, opcode, pair_op->reg_type, | |
| pair_op->reg2_map[uval]); | |
| } | |
| break; | |
| case OP_PCREL: | |
| { | |
| const struct mips_pcrel_operand *pcrel_op; | |
| pcrel_op = (const struct mips_pcrel_operand *) operand; | |
| info->target = mips_decode_pcrel_operand (pcrel_op, base_pc, uval); | |
| /* For jumps and branches clear the ISA bit except for | |
| the GDB disassembler. */ | |
| if (pcrel_op->include_isa_bit | |
| && info->flavour != bfd_target_unknown_flavour) | |
| info->target &= -2; | |
| (*info->print_address_func) (info->target, info); | |
| } | |
| break; | |
| case OP_PERF_REG: | |
| infprintf (is, dis_style_register, "%d", uval); | |
| break; | |
| case OP_ADDIUSP_INT: | |
| { | |
| int sval; | |
| sval = mips_signed_operand (operand, uval) * 4; | |
| if (sval >= -8 && sval < 8) | |
| sval ^= 0x400; | |
| infprintf (is, dis_style_immediate, "%d", sval); | |
| break; | |
| } | |
| case OP_CLO_CLZ_DEST: | |
| { | |
| unsigned int reg1, reg2; | |
| reg1 = uval & 31; | |
| reg2 = uval >> 5; | |
| /* If one is zero use the other. */ | |
| if (reg1 == reg2 || reg2 == 0) | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[reg1]); | |
| else if (reg1 == 0) | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[reg2]); | |
| else | |
| { | |
| /* Bogus, result depends on processor. */ | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[reg1]); | |
| infprintf (is, dis_style_text, " or "); | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[reg2]); | |
| } | |
| } | |
| break; | |
| case OP_SAME_RS_RT: | |
| case OP_CHECK_PREV: | |
| case OP_NON_ZERO_REG: | |
| { | |
| print_reg (info, opcode, OP_REG_GP, uval & 31); | |
| mips_seen_register (state, uval, OP_REG_GP); | |
| } | |
| break; | |
| case OP_LWM_SWM_LIST: | |
| if (operand->size == 2) | |
| { | |
| if (uval == 0) | |
| { | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[16]); | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[31]); | |
| } | |
| else | |
| { | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[16]); | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[16 + uval]); | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[31]); | |
| } | |
| } | |
| else | |
| { | |
| int s_reg_encode; | |
| s_reg_encode = uval & 0xf; | |
| if (s_reg_encode != 0) | |
| { | |
| if (s_reg_encode == 1) | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[16]); | |
| else if (s_reg_encode < 9) | |
| { | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[16]); | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[15 + s_reg_encode]); | |
| } | |
| else if (s_reg_encode == 9) | |
| { | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[16]); | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[23]); | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[30]); | |
| } | |
| else | |
| infprintf (is, dis_style_text, "UNKNOWN"); | |
| } | |
| if (uval & 0x10) /* For ra. */ | |
| { | |
| if (s_reg_encode == 0) | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[31]); | |
| else | |
| { | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[31]); | |
| } | |
| } | |
| } | |
| break; | |
| case OP_ENTRY_EXIT_LIST: | |
| { | |
| const char *sep; | |
| unsigned int amask, smask; | |
| sep = ""; | |
| amask = (uval >> 3) & 7; | |
| if (amask > 0 && amask < 5) | |
| { | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[4]); | |
| if (amask > 1) | |
| { | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[amask + 3]); | |
| } | |
| sep = ","; | |
| } | |
| smask = (uval >> 1) & 3; | |
| if (smask == 3) | |
| { | |
| infprintf (is, dis_style_text, "%s??", sep); | |
| sep = ","; | |
| } | |
| else if (smask > 0) | |
| { | |
| infprintf (is, dis_style_text, "%s", sep); | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[16]); | |
| if (smask > 1) | |
| { | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", | |
| mips_gpr_names[smask + 15]); | |
| } | |
| sep = ","; | |
| } | |
| if (uval & 1) | |
| { | |
| infprintf (is, dis_style_text, "%s", sep); | |
| infprintf (is, dis_style_register, "%s", mips_gpr_names[31]); | |
| sep = ","; | |
| } | |
| if (amask == 5 || amask == 6) | |
| { | |
| infprintf (is, dis_style_text, "%s", sep); | |
| infprintf (is, dis_style_register, "%s", mips_fpr_names[0]); | |
| if (amask == 6) | |
| { | |
| infprintf (is, dis_style_text, "-"); | |
| infprintf (is, dis_style_register, "%s", mips_fpr_names[1]); | |
| } | |
| } | |
| } | |
| break; | |
| case OP_SAVE_RESTORE_LIST: | |
| /* Should be handled by the caller due to complex behavior. */ | |
| abort (); | |
| case OP_MDMX_IMM_REG: | |
| { | |
| unsigned int vsel; | |
| vsel = uval >> 5; | |
| uval &= 31; | |
| if ((vsel & 0x10) == 0) | |
| { | |
| int fmt; | |
| vsel &= 0x0f; | |
| for (fmt = 0; fmt < 3; fmt++, vsel >>= 1) | |
| if ((vsel & 1) == 0) | |
| break; | |
| print_reg (info, opcode, OP_REG_VEC, uval); | |
| infprintf (is, dis_style_text, "["); | |
| infprintf (is, dis_style_immediate, "%d", vsel >> 1); | |
| infprintf (is, dis_style_text, "]"); | |
| } | |
| else if ((vsel & 0x08) == 0) | |
| print_reg (info, opcode, OP_REG_VEC, uval); | |
| else | |
| infprintf (is, dis_style_immediate, "0x%x", uval); | |
| } | |
| break; | |
| case OP_REPEAT_PREV_REG: | |
| print_reg (info, opcode, state->last_reg_type, state->last_regno); | |
| break; | |
| case OP_REPEAT_DEST_REG: | |
| print_reg (info, opcode, state->last_reg_type, state->dest_regno); | |
| break; | |
| case OP_PC: | |
| infprintf (is, dis_style_register, "$pc"); | |
| break; | |
| case OP_REG28: | |
| print_reg (info, opcode, OP_REG_GP, 28); | |
| break; | |
| case OP_VU0_SUFFIX: | |
| case OP_VU0_MATCH_SUFFIX: | |
| print_vu0_channel (info, operand, uval, dis_style_register); | |
| break; | |
| case OP_IMM_INDEX: | |
| infprintf (is, dis_style_text, "["); | |
| infprintf (is, dis_style_immediate, "%d", uval); | |
| infprintf (is, dis_style_text, "]"); | |
| break; | |
| case OP_REG_INDEX: | |
| infprintf (is, dis_style_text, "["); | |
| print_reg (info, opcode, OP_REG_GP, uval); | |
| infprintf (is, dis_style_text, "]"); | |
| break; | |
| } | |
| } | |
| /* Validate the arguments for INSN, which is described by OPCODE. | |
| Use DECODE_OPERAND to get the encoding of each operand. */ | |
| static bool | |
| validate_insn_args (const struct mips_opcode *opcode, | |
| const struct mips_operand *(*decode_operand) (const char *), | |
| unsigned int insn) | |
| { | |
| struct mips_print_arg_state state; | |
| const struct mips_operand *operand; | |
| const char *s; | |
| unsigned int uval; | |
| init_print_arg_state (&state); | |
| for (s = opcode->args; *s; ++s) | |
| { | |
| switch (*s) | |
| { | |
| case ',': | |
| case '(': | |
| case ')': | |
| break; | |
| case '#': | |
| ++s; | |
| break; | |
| default: | |
| operand = decode_operand (s); | |
| if (operand) | |
| { | |
| uval = mips_extract_operand (operand, insn); | |
| switch (operand->type) | |
| { | |
| case OP_REG: | |
| case OP_OPTIONAL_REG: | |
| { | |
| const struct mips_reg_operand *reg_op; | |
| reg_op = (const struct mips_reg_operand *) operand; | |
| uval = mips_decode_reg_operand (reg_op, uval); | |
| mips_seen_register (&state, uval, reg_op->reg_type); | |
| } | |
| break; | |
| case OP_SAME_RS_RT: | |
| { | |
| unsigned int reg1, reg2; | |
| reg1 = uval & 31; | |
| reg2 = uval >> 5; | |
| if (reg1 != reg2 || reg1 == 0) | |
| return false; | |
| } | |
| break; | |
| case OP_CHECK_PREV: | |
| { | |
| const struct mips_check_prev_operand *prev_op; | |
| prev_op = (const struct mips_check_prev_operand *) operand; | |
| if (!prev_op->zero_ok && uval == 0) | |
| return false; | |
| if (((prev_op->less_than_ok && uval < state.last_regno) | |
| || (prev_op->greater_than_ok && uval > state.last_regno) | |
| || (prev_op->equal_ok && uval == state.last_regno))) | |
| break; | |
| return false; | |
| } | |
| case OP_NON_ZERO_REG: | |
| { | |
| if (uval == 0) | |
| return false; | |
| } | |
| break; | |
| case OP_INT: | |
| case OP_MAPPED_INT: | |
| case OP_MSB: | |
| case OP_REG_PAIR: | |
| case OP_PCREL: | |
| case OP_PERF_REG: | |
| case OP_ADDIUSP_INT: | |
| case OP_CLO_CLZ_DEST: | |
| case OP_LWM_SWM_LIST: | |
| case OP_ENTRY_EXIT_LIST: | |
| case OP_MDMX_IMM_REG: | |
| case OP_REPEAT_PREV_REG: | |
| case OP_REPEAT_DEST_REG: | |
| case OP_PC: | |
| case OP_REG28: | |
| case OP_VU0_SUFFIX: | |
| case OP_VU0_MATCH_SUFFIX: | |
| case OP_IMM_INDEX: | |
| case OP_REG_INDEX: | |
| case OP_SAVE_RESTORE_LIST: | |
| break; | |
| } | |
| } | |
| if (*s == 'm' || *s == '+' || *s == '-') | |
| ++s; | |
| } | |
| } | |
| return true; | |
| } | |
| /* Print the arguments for INSN, which is described by OPCODE. | |
| Use DECODE_OPERAND to get the encoding of each operand. Use BASE_PC | |
| as the base of OP_PCREL operands, adjusting by LENGTH if the OP_PCREL | |
| operand is for a branch or jump. */ | |
| static void | |
| print_insn_args (struct disassemble_info *info, | |
| const struct mips_opcode *opcode, | |
| const struct mips_operand *(*decode_operand) (const char *), | |
| unsigned int insn, bfd_vma insn_pc, unsigned int length) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| void *is = info->stream; | |
| struct mips_print_arg_state state; | |
| const struct mips_operand *operand; | |
| const char *s; | |
| init_print_arg_state (&state); | |
| for (s = opcode->args; *s; ++s) | |
| { | |
| switch (*s) | |
| { | |
| case ',': | |
| case '(': | |
| case ')': | |
| infprintf (is, dis_style_text, "%c", *s); | |
| break; | |
| case '#': | |
| ++s; | |
| infprintf (is, dis_style_text, "%c%c", *s, *s); | |
| break; | |
| default: | |
| operand = decode_operand (s); | |
| if (!operand) | |
| { | |
| /* xgettext:c-format */ | |
| infprintf (is, dis_style_text, | |
| _("# internal error, undefined operand in `%s %s'"), | |
| opcode->name, opcode->args); | |
| return; | |
| } | |
| if (operand->type == OP_SAVE_RESTORE_LIST) | |
| { | |
| /* Handle this case here because of the complex behavior. */ | |
| unsigned int amask = (insn >> 15) & 0xf; | |
| unsigned int nsreg = (insn >> 23) & 0x7; | |
| unsigned int ra = insn & 0x1000; /* $ra */ | |
| unsigned int s0 = insn & 0x800; /* $s0 */ | |
| unsigned int s1 = insn & 0x400; /* $s1 */ | |
| unsigned int frame_size = (((insn >> 15) & 0xf0) | |
| | ((insn >> 6) & 0x0f)) * 8; | |
| mips_print_save_restore (info, amask, nsreg, ra, s0, s1, | |
| frame_size); | |
| } | |
| else if (operand->type == OP_REG | |
| && s[1] == ',' | |
| && (s[2] == 'H' || s[2] == 'J') | |
| && opcode->name[strlen (opcode->name) - 1] == '0') | |
| { | |
| /* Coprocessor register 0 with sel field. */ | |
| const struct mips_cp0sel_name *n; | |
| unsigned int reg, sel; | |
| reg = mips_extract_operand (operand, insn); | |
| s += 2; | |
| operand = decode_operand (s); | |
| sel = mips_extract_operand (operand, insn); | |
| /* CP0 register including 'sel' code for mftc0, to be | |
| printed textually if known. If not known, print both | |
| CP0 register name and sel numerically since CP0 register | |
| with sel 0 may have a name unrelated to register being | |
| printed. */ | |
| n = lookup_mips_cp0sel_name (mips_cp0sel_names, | |
| mips_cp0sel_names_len, | |
| reg, sel); | |
| if (n != NULL) | |
| infprintf (is, dis_style_register, "%s", n->name); | |
| else | |
| { | |
| infprintf (is, dis_style_register, "$%d", reg); | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_immediate, "%d", sel); | |
| } | |
| } | |
| else | |
| { | |
| bfd_vma base_pc = insn_pc; | |
| /* Adjust the PC relative base so that branch/jump insns use | |
| the following PC as the base but genuinely PC relative | |
| operands use the current PC. */ | |
| if (operand->type == OP_PCREL) | |
| { | |
| const struct mips_pcrel_operand *pcrel_op; | |
| pcrel_op = (const struct mips_pcrel_operand *) operand; | |
| /* The include_isa_bit flag is sufficient to distinguish | |
| branch/jump from other PC relative operands. */ | |
| if (pcrel_op->include_isa_bit) | |
| base_pc += length; | |
| } | |
| print_insn_arg (info, &state, opcode, operand, base_pc, | |
| mips_extract_operand (operand, insn)); | |
| } | |
| if (*s == 'm' || *s == '+' || *s == '-') | |
| ++s; | |
| break; | |
| } | |
| } | |
| } | |
| /* Print the mips instruction at address MEMADDR in debugged memory, | |
| on using INFO. Returns length of the instruction, in bytes, which is | |
| always INSNLEN. BIGENDIAN must be 1 if this is big-endian code, 0 if | |
| this is little-endian code. */ | |
| static int | |
| print_insn_mips (bfd_vma memaddr, | |
| int word, | |
| struct disassemble_info *info) | |
| { | |
| #define GET_OP(insn, field) \ | |
| (((insn) >> OP_SH_##field) & OP_MASK_##field) | |
| static const struct mips_opcode *mips_hash[OP_MASK_OP + 1]; | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| const struct mips_opcode *op; | |
| static bool init = 0; | |
| void *is = info->stream; | |
| /* Build a hash table to shorten the search time. */ | |
| if (! init) | |
| { | |
| unsigned int i; | |
| for (i = 0; i <= OP_MASK_OP; i++) | |
| { | |
| for (op = mips_opcodes; op < &mips_opcodes[NUMOPCODES]; op++) | |
| { | |
| if (op->pinfo == INSN_MACRO | |
| || (no_aliases && (op->pinfo2 & INSN2_ALIAS))) | |
| continue; | |
| if (i == GET_OP (op->match, OP)) | |
| { | |
| mips_hash[i] = op; | |
| break; | |
| } | |
| } | |
| } | |
| init = 1; | |
| } | |
| info->bytes_per_chunk = INSNLEN; | |
| info->display_endian = info->endian; | |
| info->insn_info_valid = 1; | |
| info->branch_delay_insns = 0; | |
| info->data_size = 0; | |
| info->insn_type = dis_nonbranch; | |
| info->target = 0; | |
| info->target2 = 0; | |
| op = mips_hash[GET_OP (word, OP)]; | |
| if (op != NULL) | |
| { | |
| for (; op < &mips_opcodes[NUMOPCODES]; op++) | |
| { | |
| if (op->pinfo != INSN_MACRO | |
| && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) | |
| && (word & op->mask) == op->match) | |
| { | |
| /* We always disassemble the jalx instruction, except for MIPS r6. */ | |
| if (!opcode_is_member (op, mips_isa, mips_ase, mips_processor) | |
| && (strcmp (op->name, "jalx") | |
| || (mips_isa & INSN_ISA_MASK) == ISA_MIPS32R6 | |
| || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R6)) | |
| continue; | |
| /* Figure out instruction type and branch delay information. */ | |
| if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) | |
| { | |
| if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_1)) != 0) | |
| info->insn_type = dis_jsr; | |
| else | |
| info->insn_type = dis_branch; | |
| info->branch_delay_insns = 1; | |
| } | |
| else if ((op->pinfo & (INSN_COND_BRANCH_DELAY | |
| | INSN_COND_BRANCH_LIKELY)) != 0) | |
| { | |
| if ((op->pinfo & INSN_WRITE_GPR_31) != 0) | |
| info->insn_type = dis_condjsr; | |
| else | |
| info->insn_type = dis_condbranch; | |
| info->branch_delay_insns = 1; | |
| } | |
| else if ((op->pinfo & (INSN_STORE_MEMORY | |
| | INSN_LOAD_MEMORY)) != 0) | |
| info->insn_type = dis_dref; | |
| if (!validate_insn_args (op, decode_mips_operand, word)) | |
| continue; | |
| infprintf (is, dis_style_mnemonic, "%s", op->name); | |
| if (op->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) | |
| { | |
| unsigned int uval; | |
| infprintf (is, dis_style_mnemonic, "."); | |
| uval = mips_extract_operand (&mips_vu0_channel_mask, word); | |
| print_vu0_channel (info, &mips_vu0_channel_mask, uval, | |
| dis_style_mnemonic); | |
| } | |
| if (op->args[0]) | |
| { | |
| infprintf (is, dis_style_text, "\t"); | |
| print_insn_args (info, op, decode_mips_operand, word, | |
| memaddr, 4); | |
| } | |
| return INSNLEN; | |
| } | |
| } | |
| } | |
| #undef GET_OP | |
| /* Handle undefined instructions. */ | |
| info->insn_type = dis_noninsn; | |
| infprintf (is, dis_style_assembler_directive, ".word"); | |
| infprintf (is, dis_style_text, "\t"); | |
| infprintf (is, dis_style_immediate, "0x%x", word); | |
| return INSNLEN; | |
| } | |
| /* Disassemble an operand for a mips16 instruction. */ | |
| static void | |
| print_mips16_insn_arg (struct disassemble_info *info, | |
| struct mips_print_arg_state *state, | |
| const struct mips_opcode *opcode, | |
| char type, bfd_vma memaddr, | |
| unsigned insn, bool use_extend, | |
| unsigned extend, bool is_offset) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| void *is = info->stream; | |
| const struct mips_operand *operand, *ext_operand; | |
| unsigned short ext_size; | |
| unsigned int uval; | |
| bfd_vma baseaddr; | |
| if (!use_extend) | |
| extend = 0; | |
| switch (type) | |
| { | |
| case ',': | |
| case '(': | |
| case ')': | |
| infprintf (is, dis_style_text, "%c", type); | |
| break; | |
| default: | |
| operand = decode_mips16_operand (type, false); | |
| if (!operand) | |
| { | |
| /* xgettext:c-format */ | |
| infprintf (is, dis_style_text, _("# internal error, undefined operand in `%s %s'"), | |
| opcode->name, opcode->args); | |
| return; | |
| } | |
| if (operand->type == OP_SAVE_RESTORE_LIST) | |
| { | |
| /* Handle this case here because of the complex interaction | |
| with the EXTEND opcode. */ | |
| unsigned int amask = extend & 0xf; | |
| unsigned int nsreg = (extend >> 8) & 0x7; | |
| unsigned int ra = insn & 0x40; /* $ra */ | |
| unsigned int s0 = insn & 0x20; /* $s0 */ | |
| unsigned int s1 = insn & 0x10; /* $s1 */ | |
| unsigned int frame_size = ((extend & 0xf0) | (insn & 0x0f)) * 8; | |
| if (frame_size == 0 && !use_extend) | |
| frame_size = 128; | |
| mips_print_save_restore (info, amask, nsreg, ra, s0, s1, frame_size); | |
| break; | |
| } | |
| if (is_offset && operand->type == OP_INT) | |
| { | |
| const struct mips_int_operand *int_op; | |
| int_op = (const struct mips_int_operand *) operand; | |
| info->insn_type = dis_dref; | |
| info->data_size = 1 << int_op->shift; | |
| } | |
| ext_size = 0; | |
| if (use_extend) | |
| { | |
| ext_operand = decode_mips16_operand (type, true); | |
| if (ext_operand != operand | |
| || (operand->type == OP_INT && operand->lsb == 0 | |
| && mips_opcode_32bit_p (opcode))) | |
| { | |
| ext_size = ext_operand->size; | |
| operand = ext_operand; | |
| } | |
| } | |
| if (operand->size == 26) | |
| uval = ((extend & 0x1f) << 21) | ((extend & 0x3e0) << 11) | insn; | |
| else if (ext_size == 16 || ext_size == 9) | |
| uval = ((extend & 0x1f) << 11) | (extend & 0x7e0) | (insn & 0x1f); | |
| else if (ext_size == 15) | |
| uval = ((extend & 0xf) << 11) | (extend & 0x7f0) | (insn & 0xf); | |
| else if (ext_size == 6) | |
| uval = ((extend >> 6) & 0x1f) | (extend & 0x20); | |
| else | |
| uval = mips_extract_operand (operand, (extend << 16) | insn); | |
| if (ext_size == 9) | |
| uval &= (1U << ext_size) - 1; | |
| baseaddr = memaddr + 2; | |
| if (operand->type == OP_PCREL) | |
| { | |
| const struct mips_pcrel_operand *pcrel_op; | |
| pcrel_op = (const struct mips_pcrel_operand *) operand; | |
| if (!pcrel_op->include_isa_bit && use_extend) | |
| baseaddr = memaddr - 2; | |
| else if (!pcrel_op->include_isa_bit) | |
| { | |
| bfd_byte buffer[2]; | |
| /* If this instruction is in the delay slot of a JAL/JALX | |
| instruction, the base address is the address of the | |
| JAL/JALX instruction. If it is in the delay slot of | |
| a JR/JALR instruction, the base address is the address | |
| of the JR/JALR instruction. This test is unreliable: | |
| we have no way of knowing whether the previous word is | |
| instruction or data. */ | |
| if (info->read_memory_func (memaddr - 4, buffer, 2, info) == 0 | |
| && (((info->endian == BFD_ENDIAN_BIG | |
| ? bfd_getb16 (buffer) | |
| : bfd_getl16 (buffer)) | |
| & 0xf800) == 0x1800)) | |
| baseaddr = memaddr - 4; | |
| else if (info->read_memory_func (memaddr - 2, buffer, 2, | |
| info) == 0 | |
| && (((info->endian == BFD_ENDIAN_BIG | |
| ? bfd_getb16 (buffer) | |
| : bfd_getl16 (buffer)) | |
| & 0xf89f) == 0xe800) | |
| && (((info->endian == BFD_ENDIAN_BIG | |
| ? bfd_getb16 (buffer) | |
| : bfd_getl16 (buffer)) | |
| & 0x0060) != 0x0060)) | |
| baseaddr = memaddr - 2; | |
| else | |
| baseaddr = memaddr; | |
| } | |
| } | |
| print_insn_arg (info, state, opcode, operand, baseaddr + 1, uval); | |
| break; | |
| } | |
| } | |
| /* Check if the given address is the last word of a MIPS16 PLT entry. | |
| This word is data and depending on the value it may interfere with | |
| disassembly of further PLT entries. We make use of the fact PLT | |
| symbols are marked BSF_SYNTHETIC. */ | |
| static bool | |
| is_mips16_plt_tail (struct disassemble_info *info, bfd_vma addr) | |
| { | |
| if (info->symbols | |
| && info->symbols[0] | |
| && (info->symbols[0]->flags & BSF_SYNTHETIC) | |
| && addr == bfd_asymbol_value (info->symbols[0]) + 12) | |
| return true; | |
| return false; | |
| } | |
| /* Whether none, a 32-bit or a 16-bit instruction match has been done. */ | |
| enum match_kind | |
| { | |
| MATCH_NONE, | |
| MATCH_FULL, | |
| MATCH_SHORT | |
| }; | |
| /* Disassemble mips16 instructions. */ | |
| static int | |
| print_insn_mips16 (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| int status; | |
| bfd_byte buffer[4]; | |
| const struct mips_opcode *op, *opend; | |
| struct mips_print_arg_state state; | |
| void *is = info->stream; | |
| bool have_second; | |
| bool extend_only; | |
| unsigned int second; | |
| unsigned int first; | |
| unsigned int full; | |
| info->bytes_per_chunk = 2; | |
| info->display_endian = info->endian; | |
| info->insn_info_valid = 1; | |
| info->branch_delay_insns = 0; | |
| info->data_size = 0; | |
| info->target = 0; | |
| info->target2 = 0; | |
| #define GET_OP(insn, field) \ | |
| (((insn) >> MIPS16OP_SH_##field) & MIPS16OP_MASK_##field) | |
| /* Decode PLT entry's GOT slot address word. */ | |
| if (is_mips16_plt_tail (info, memaddr)) | |
| { | |
| info->insn_type = dis_noninsn; | |
| status = (*info->read_memory_func) (memaddr, buffer, 4, info); | |
| if (status == 0) | |
| { | |
| unsigned int gotslot; | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| gotslot = bfd_getb32 (buffer); | |
| else | |
| gotslot = bfd_getl32 (buffer); | |
| infprintf (is, dis_style_assembler_directive, ".word"); | |
| infprintf (is, dis_style_text, "\t"); | |
| infprintf (is, dis_style_immediate, "0x%x", gotslot); | |
| return 4; | |
| } | |
| } | |
| else | |
| { | |
| info->insn_type = dis_nonbranch; | |
| status = (*info->read_memory_func) (memaddr, buffer, 2, info); | |
| } | |
| if (status != 0) | |
| { | |
| (*info->memory_error_func) (status, memaddr, info); | |
| return -1; | |
| } | |
| extend_only = false; | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| first = bfd_getb16 (buffer); | |
| else | |
| first = bfd_getl16 (buffer); | |
| status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info); | |
| if (status == 0) | |
| { | |
| have_second = true; | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| second = bfd_getb16 (buffer); | |
| else | |
| second = bfd_getl16 (buffer); | |
| full = (first << 16) | second; | |
| } | |
| else | |
| { | |
| have_second = false; | |
| second = 0; | |
| full = first; | |
| } | |
| /* FIXME: Should probably use a hash table on the major opcode here. */ | |
| opend = mips16_opcodes + bfd_mips16_num_opcodes; | |
| for (op = mips16_opcodes; op < opend; op++) | |
| { | |
| enum match_kind match; | |
| if (!opcode_is_member (op, mips_isa, mips_ase, mips_processor)) | |
| continue; | |
| if (op->pinfo == INSN_MACRO | |
| || (no_aliases && (op->pinfo2 & INSN2_ALIAS))) | |
| match = MATCH_NONE; | |
| else if (mips_opcode_32bit_p (op)) | |
| { | |
| if (have_second | |
| && (full & op->mask) == op->match) | |
| match = MATCH_FULL; | |
| else | |
| match = MATCH_NONE; | |
| } | |
| else if ((first & op->mask) == op->match) | |
| { | |
| match = MATCH_SHORT; | |
| second = 0; | |
| full = first; | |
| } | |
| else if ((first & 0xf800) == 0xf000 | |
| && have_second | |
| && !extend_only | |
| && (second & op->mask) == op->match) | |
| { | |
| if (op->pinfo2 & INSN2_SHORT_ONLY) | |
| { | |
| match = MATCH_NONE; | |
| extend_only = true; | |
| } | |
| else | |
| match = MATCH_FULL; | |
| } | |
| else | |
| match = MATCH_NONE; | |
| if (match != MATCH_NONE) | |
| { | |
| const char *s; | |
| infprintf (is, dis_style_mnemonic, "%s", op->name); | |
| if (op->args[0] != '\0') | |
| infprintf (is, dis_style_text, "\t"); | |
| init_print_arg_state (&state); | |
| for (s = op->args; *s != '\0'; s++) | |
| { | |
| if (*s == ',' | |
| && s[1] == 'w' | |
| && GET_OP (full, RX) == GET_OP (full, RY)) | |
| { | |
| /* Skip the register and the comma. */ | |
| ++s; | |
| continue; | |
| } | |
| if (*s == ',' | |
| && s[1] == 'v' | |
| && GET_OP (full, RZ) == GET_OP (full, RX)) | |
| { | |
| /* Skip the register and the comma. */ | |
| ++s; | |
| continue; | |
| } | |
| if (s[0] == 'N' | |
| && s[1] == ',' | |
| && s[2] == 'O' | |
| && op->name[strlen (op->name) - 1] == '0') | |
| { | |
| /* Coprocessor register 0 with sel field. */ | |
| const struct mips_cp0sel_name *n; | |
| const struct mips_operand *operand; | |
| unsigned int reg, sel; | |
| operand = decode_mips16_operand (*s, true); | |
| reg = mips_extract_operand (operand, (first << 16) | second); | |
| s += 2; | |
| operand = decode_mips16_operand (*s, true); | |
| sel = mips_extract_operand (operand, (first << 16) | second); | |
| /* CP0 register including 'sel' code for mftc0, to be | |
| printed textually if known. If not known, print both | |
| CP0 register name and sel numerically since CP0 register | |
| with sel 0 may have a name unrelated to register being | |
| printed. */ | |
| n = lookup_mips_cp0sel_name (mips_cp0sel_names, | |
| mips_cp0sel_names_len, | |
| reg, sel); | |
| if (n != NULL) | |
| infprintf (is, dis_style_register, "%s", n->name); | |
| else | |
| { | |
| infprintf (is, dis_style_register, "$%d", reg); | |
| infprintf (is, dis_style_text, ","); | |
| infprintf (is, dis_style_immediate, "%d", sel); | |
| } | |
| } | |
| else | |
| switch (match) | |
| { | |
| case MATCH_FULL: | |
| print_mips16_insn_arg (info, &state, op, *s, memaddr + 2, | |
| second, true, first, s[1] == '('); | |
| break; | |
| case MATCH_SHORT: | |
| print_mips16_insn_arg (info, &state, op, *s, memaddr, | |
| first, false, 0, s[1] == '('); | |
| break; | |
| case MATCH_NONE: /* Stop the compiler complaining. */ | |
| break; | |
| } | |
| } | |
| /* Figure out branch instruction type and delay slot information. */ | |
| if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) | |
| info->branch_delay_insns = 1; | |
| if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0 | |
| || (op->pinfo2 & INSN2_UNCOND_BRANCH) != 0) | |
| { | |
| if ((op->pinfo & INSN_WRITE_GPR_31) != 0) | |
| info->insn_type = dis_jsr; | |
| else | |
| info->insn_type = dis_branch; | |
| } | |
| else if ((op->pinfo2 & INSN2_COND_BRANCH) != 0) | |
| info->insn_type = dis_condbranch; | |
| return match == MATCH_FULL ? 4 : 2; | |
| } | |
| } | |
| #undef GET_OP | |
| infprintf (is, dis_style_assembler_directive, ".short"); | |
| infprintf (is, dis_style_text, "\t"); | |
| infprintf (is, dis_style_immediate, "0x%x", first); | |
| info->insn_type = dis_noninsn; | |
| return 2; | |
| } | |
| /* Disassemble microMIPS instructions. */ | |
| static int | |
| print_insn_micromips (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| const fprintf_styled_ftype infprintf = info->fprintf_styled_func; | |
| const struct mips_opcode *op, *opend; | |
| void *is = info->stream; | |
| bfd_byte buffer[2]; | |
| unsigned int higher; | |
| unsigned int length; | |
| int status; | |
| unsigned int insn; | |
| info->bytes_per_chunk = 2; | |
| info->display_endian = info->endian; | |
| info->insn_info_valid = 1; | |
| info->branch_delay_insns = 0; | |
| info->data_size = 0; | |
| info->insn_type = dis_nonbranch; | |
| info->target = 0; | |
| info->target2 = 0; | |
| status = (*info->read_memory_func) (memaddr, buffer, 2, info); | |
| if (status != 0) | |
| { | |
| (*info->memory_error_func) (status, memaddr, info); | |
| return -1; | |
| } | |
| length = 2; | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| insn = bfd_getb16 (buffer); | |
| else | |
| insn = bfd_getl16 (buffer); | |
| if ((insn & 0x1c00) == 0x0000 || (insn & 0x1000) == 0x1000) | |
| { | |
| /* This is a 32-bit microMIPS instruction. */ | |
| higher = insn; | |
| status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info); | |
| if (status != 0) | |
| { | |
| infprintf (is, dis_style_text, "micromips 0x%x", higher); | |
| (*info->memory_error_func) (status, memaddr + 2, info); | |
| return -1; | |
| } | |
| if (info->endian == BFD_ENDIAN_BIG) | |
| insn = bfd_getb16 (buffer); | |
| else | |
| insn = bfd_getl16 (buffer); | |
| insn = insn | (higher << 16); | |
| length += 2; | |
| } | |
| /* FIXME: Should probably use a hash table on the major opcode here. */ | |
| opend = micromips_opcodes + bfd_micromips_num_opcodes; | |
| for (op = micromips_opcodes; op < opend; op++) | |
| { | |
| if (op->pinfo != INSN_MACRO | |
| && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) | |
| && (insn & op->mask) == op->match | |
| && ((length == 2 && (op->mask & 0xffff0000) == 0) | |
| || (length == 4 && (op->mask & 0xffff0000) != 0))) | |
| { | |
| if (!validate_insn_args (op, decode_micromips_operand, insn)) | |
| continue; | |
| infprintf (is, dis_style_mnemonic, "%s", op->name); | |
| if (op->args[0]) | |
| { | |
| infprintf (is, dis_style_text, "\t"); | |
| print_insn_args (info, op, decode_micromips_operand, insn, | |
| memaddr + 1, length); | |
| } | |
| /* Figure out instruction type and branch delay information. */ | |
| if ((op->pinfo | |
| & (INSN_UNCOND_BRANCH_DELAY | INSN_COND_BRANCH_DELAY)) != 0) | |
| info->branch_delay_insns = 1; | |
| if (((op->pinfo & INSN_UNCOND_BRANCH_DELAY) | |
| | (op->pinfo2 & INSN2_UNCOND_BRANCH)) != 0) | |
| { | |
| if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_1)) != 0) | |
| info->insn_type = dis_jsr; | |
| else | |
| info->insn_type = dis_branch; | |
| } | |
| else if (((op->pinfo & INSN_COND_BRANCH_DELAY) | |
| | (op->pinfo2 & INSN2_COND_BRANCH)) != 0) | |
| { | |
| if ((op->pinfo & INSN_WRITE_GPR_31) != 0) | |
| info->insn_type = dis_condjsr; | |
| else | |
| info->insn_type = dis_condbranch; | |
| } | |
| else if ((op->pinfo | |
| & (INSN_STORE_MEMORY | INSN_LOAD_MEMORY)) != 0) | |
| info->insn_type = dis_dref; | |
| return length; | |
| } | |
| } | |
| infprintf (is, dis_style_assembler_directive, ".short"); | |
| infprintf (is, dis_style_text, "\t"); | |
| if (length != 2) | |
| { | |
| infprintf (is, dis_style_immediate, "0x%x", (insn >> 16) & 0xffff); | |
| infprintf (is, dis_style_text, ", "); | |
| } | |
| infprintf (is, dis_style_immediate, "0x%x", (insn & 0xffff)); | |
| info->insn_type = dis_noninsn; | |
| return length; | |
| } | |
| /* Return 1 if a symbol associated with the location being disassembled | |
| indicates a compressed mode, either MIPS16 or microMIPS, according to | |
| MICROMIPS_P. We iterate over all the symbols at the address being | |
| considered assuming if at least one of them indicates code compression, | |
| then such code has been genuinely produced here (other symbols could | |
| have been derived from function symbols defined elsewhere or could | |
| define data). Otherwise, return 0. */ | |
| static bool | |
| is_compressed_mode_p (struct disassemble_info *info, bool micromips_p) | |
| { | |
| int i; | |
| int l; | |
| for (i = info->symtab_pos, l = i + info->num_symbols; i < l; i++) | |
| if (((info->symtab[i])->flags & BSF_SYNTHETIC) != 0 | |
| && ((!micromips_p | |
| && ELF_ST_IS_MIPS16 ((*info->symbols)->udata.i)) | |
| || (micromips_p | |
| && ELF_ST_IS_MICROMIPS ((*info->symbols)->udata.i)))) | |
| return 1; | |
| else if (bfd_asymbol_flavour (info->symtab[i]) == bfd_target_elf_flavour | |
| && info->symtab[i]->section == info->section) | |
| { | |
| elf_symbol_type *symbol = (elf_symbol_type *) info->symtab[i]; | |
| if ((!micromips_p | |
| && ELF_ST_IS_MIPS16 (symbol->internal_elf_sym.st_other)) | |
| || (micromips_p | |
| && ELF_ST_IS_MICROMIPS (symbol->internal_elf_sym.st_other))) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* In an environment where we do not know the symbol type of the | |
| instruction we are forced to assume that the low order bit of the | |
| instructions' address may mark it as a mips16 instruction. If we | |
| are single stepping, or the pc is within the disassembled function, | |
| this works. Otherwise, we need a clue. Sometimes. */ | |
| static int | |
| _print_insn_mips (bfd_vma memaddr, | |
| struct disassemble_info *info, | |
| enum bfd_endian endianness) | |
| { | |
| bfd_byte buffer[INSNLEN]; | |
| int status; | |
| set_default_mips_dis_options (info); | |
| parse_mips_dis_options (info->disassembler_options); | |
| if (info->mach == bfd_mach_mips16) | |
| return print_insn_mips16 (memaddr, info); | |
| if (info->mach == bfd_mach_mips_micromips) | |
| return print_insn_micromips (memaddr, info); | |
| #if 1 | |
| /* FIXME: If odd address, this is CLEARLY a compressed instruction. */ | |
| /* Only a few tools will work this way. */ | |
| if (memaddr & 0x01) | |
| { | |
| if (micromips_ase) | |
| return print_insn_micromips (memaddr, info); | |
| else | |
| return print_insn_mips16 (memaddr, info); | |
| } | |
| #endif | |
| #if SYMTAB_AVAILABLE | |
| if (is_compressed_mode_p (info, true)) | |
| return print_insn_micromips (memaddr, info); | |
| if (is_compressed_mode_p (info, false)) | |
| return print_insn_mips16 (memaddr, info); | |
| #endif | |
| status = (*info->read_memory_func) (memaddr, buffer, INSNLEN, info); | |
| if (status == 0) | |
| { | |
| int insn; | |
| if (endianness == BFD_ENDIAN_BIG) | |
| insn = bfd_getb32 (buffer); | |
| else | |
| insn = bfd_getl32 (buffer); | |
| return print_insn_mips (memaddr, insn, info); | |
| } | |
| else | |
| { | |
| (*info->memory_error_func) (status, memaddr, info); | |
| return -1; | |
| } | |
| } | |
| int | |
| print_insn_big_mips (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| return _print_insn_mips (memaddr, info, BFD_ENDIAN_BIG); | |
| } | |
| int | |
| print_insn_little_mips (bfd_vma memaddr, struct disassemble_info *info) | |
| { | |
| return _print_insn_mips (memaddr, info, BFD_ENDIAN_LITTLE); | |
| } | |
| /* Indices into option argument vector for options accepting an argument. | |
| Use MIPS_OPTION_ARG_NONE for options accepting no argument. */ | |
| typedef enum | |
| { | |
| MIPS_OPTION_ARG_NONE = -1, | |
| MIPS_OPTION_ARG_ABI, | |
| MIPS_OPTION_ARG_ARCH, | |
| MIPS_OPTION_ARG_SIZE | |
| } mips_option_arg_t; | |
| /* Valid MIPS disassembler options. */ | |
| static struct | |
| { | |
| const char *name; | |
| const char *description; | |
| mips_option_arg_t arg; | |
| } mips_options[] = | |
| { | |
| { "no-aliases", N_("Use canonical instruction forms.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "msa", N_("Recognize MSA instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "virt", N_("Recognize the virtualization ASE instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "xpa", N_("Recognize the eXtended Physical Address (XPA) ASE\n\ | |
| instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "ginv", N_("Recognize the Global INValidate (GINV) ASE " | |
| "instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "loongson-mmi", | |
| N_("Recognize the Loongson MultiMedia extensions " | |
| "Instructions (MMI) ASE instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "loongson-cam", | |
| N_("Recognize the Loongson Content Address Memory (CAM) " | |
| " instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "loongson-ext", | |
| N_("Recognize the Loongson EXTensions (EXT) " | |
| " instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "loongson-ext2", | |
| N_("Recognize the Loongson EXTensions R2 (EXT2) " | |
| " instructions.\n"), | |
| MIPS_OPTION_ARG_NONE }, | |
| { "gpr-names=", N_("Print GPR names according to specified ABI.\n\ | |
| Default: based on binary being disassembled.\n"), | |
| MIPS_OPTION_ARG_ABI }, | |
| { "fpr-names=", N_("Print FPR names according to specified ABI.\n\ | |
| Default: numeric.\n"), | |
| MIPS_OPTION_ARG_ABI }, | |
| { "cp0-names=", N_("Print CP0 register names according to specified " | |
| "architecture.\n\ | |
| Default: based on binary being disassembled.\n"), | |
| MIPS_OPTION_ARG_ARCH }, | |
| { "hwr-names=", N_("Print HWR names according to specified architecture.\n\ | |
| Default: based on binary being disassembled.\n"), | |
| MIPS_OPTION_ARG_ARCH }, | |
| { "reg-names=", N_("Print GPR and FPR names according to specified ABI.\n"), | |
| MIPS_OPTION_ARG_ABI }, | |
| { "reg-names=", N_("Print CP0 register and HWR names according to " | |
| "specified\n\ | |
| architecture."), | |
| MIPS_OPTION_ARG_ARCH } | |
| }; | |
| /* Build the structure representing valid MIPS disassembler options. | |
| This is done dynamically for maintenance ease purpose; a static | |
| initializer would be unreadable. */ | |
| const disasm_options_and_args_t * | |
| disassembler_options_mips (void) | |
| { | |
| static disasm_options_and_args_t *opts_and_args; | |
| if (opts_and_args == NULL) | |
| { | |
| size_t num_options = ARRAY_SIZE (mips_options); | |
| size_t num_args = MIPS_OPTION_ARG_SIZE; | |
| disasm_option_arg_t *args; | |
| disasm_options_t *opts; | |
| size_t i; | |
| size_t j; | |
| args = XNEWVEC (disasm_option_arg_t, num_args + 1); | |
| args[MIPS_OPTION_ARG_ABI].name = "ABI"; | |
| args[MIPS_OPTION_ARG_ABI].values | |
| = XNEWVEC (const char *, ARRAY_SIZE (mips_abi_choices) + 1); | |
| for (i = 0; i < ARRAY_SIZE (mips_abi_choices); i++) | |
| args[MIPS_OPTION_ARG_ABI].values[i] = mips_abi_choices[i].name; | |
| /* The array we return must be NULL terminated. */ | |
| args[MIPS_OPTION_ARG_ABI].values[i] = NULL; | |
| args[MIPS_OPTION_ARG_ARCH].name = "ARCH"; | |
| args[MIPS_OPTION_ARG_ARCH].values | |
| = XNEWVEC (const char *, ARRAY_SIZE (mips_arch_choices) + 1); | |
| for (i = 0, j = 0; i < ARRAY_SIZE (mips_arch_choices); i++) | |
| if (*mips_arch_choices[i].name != '\0') | |
| args[MIPS_OPTION_ARG_ARCH].values[j++] = mips_arch_choices[i].name; | |
| /* The array we return must be NULL terminated. */ | |
| args[MIPS_OPTION_ARG_ARCH].values[j] = NULL; | |
| /* The array we return must be NULL terminated. */ | |
| args[MIPS_OPTION_ARG_SIZE].name = NULL; | |
| args[MIPS_OPTION_ARG_SIZE].values = NULL; | |
| opts_and_args = XNEW (disasm_options_and_args_t); | |
| opts_and_args->args = args; | |
| opts = &opts_and_args->options; | |
| opts->name = XNEWVEC (const char *, num_options + 1); | |
| opts->description = XNEWVEC (const char *, num_options + 1); | |
| opts->arg = XNEWVEC (const disasm_option_arg_t *, num_options + 1); | |
| for (i = 0; i < num_options; i++) | |
| { | |
| opts->name[i] = mips_options[i].name; | |
| opts->description[i] = _(mips_options[i].description); | |
| if (mips_options[i].arg != MIPS_OPTION_ARG_NONE) | |
| opts->arg[i] = &args[mips_options[i].arg]; | |
| else | |
| opts->arg[i] = NULL; | |
| } | |
| /* The array we return must be NULL terminated. */ | |
| opts->name[i] = NULL; | |
| opts->description[i] = NULL; | |
| opts->arg[i] = NULL; | |
| } | |
| return opts_and_args; | |
| } | |
| void | |
| print_mips_disassembler_options (FILE *stream) | |
| { | |
| const disasm_options_and_args_t *opts_and_args; | |
| const disasm_option_arg_t *args; | |
| const disasm_options_t *opts; | |
| size_t max_len = 0; | |
| size_t i; | |
| size_t j; | |
| opts_and_args = disassembler_options_mips (); | |
| opts = &opts_and_args->options; | |
| args = opts_and_args->args; | |
| fprintf (stream, _("\n\ | |
| The following MIPS specific disassembler options are supported for use\n\ | |
| with the -M switch (multiple options should be separated by commas):\n\n")); | |
| /* Compute the length of the longest option name. */ | |
| for (i = 0; opts->name[i] != NULL; i++) | |
| { | |
| size_t len = strlen (opts->name[i]); | |
| if (opts->arg[i] != NULL) | |
| len += strlen (opts->arg[i]->name); | |
| if (max_len < len) | |
| max_len = len; | |
| } | |
| for (i = 0, max_len++; opts->name[i] != NULL; i++) | |
| { | |
| fprintf (stream, " %s", opts->name[i]); | |
| if (opts->arg[i] != NULL) | |
| fprintf (stream, "%s", opts->arg[i]->name); | |
| if (opts->description[i] != NULL) | |
| { | |
| size_t len = strlen (opts->name[i]); | |
| if (opts->arg[i] != NULL) | |
| len += strlen (opts->arg[i]->name); | |
| fprintf (stream, | |
| "%*c %s", (int) (max_len - len), ' ', opts->description[i]); | |
| } | |
| fprintf (stream, _("\n")); | |
| } | |
| for (i = 0; args[i].name != NULL; i++) | |
| { | |
| if (args[i].values == NULL) | |
| continue; | |
| fprintf (stream, _("\n\ | |
| For the options above, the following values are supported for \"%s\":\n "), | |
| args[i].name); | |
| for (j = 0; args[i].values[j] != NULL; j++) | |
| fprintf (stream, " %s", args[i].values[j]); | |
| fprintf (stream, _("\n")); | |
| } | |
| fprintf (stream, _("\n")); | |
| } |