| /* Process record and replay target for GDB, the GNU debugger. |
| |
| Copyright (C) 2013-2020 Free Software Foundation, Inc. |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| #include "defs.h" |
| #include "gdbcmd.h" |
| #include "regcache.h" |
| #include "gdbthread.h" |
| #include "inferior.h" |
| #include "event-top.h" |
| #include "completer.h" |
| #include "arch-utils.h" |
| #include "gdbcore.h" |
| #include "exec.h" |
| #include "record.h" |
| #include "record-full.h" |
| #include "elf-bfd.h" |
| #include "gcore.h" |
| #include "event-loop.h" |
| #include "inf-loop.h" |
| #include "gdb_bfd.h" |
| #include "observable.h" |
| #include "infrun.h" |
| #include "gdbsupport/gdb_unlinker.h" |
| #include "gdbsupport/byte-vector.h" |
| |
| #include <signal.h> |
| |
| /* This module implements "target record-full", also known as "process |
| record and replay". This target sits on top of a "normal" target |
| (a target that "has execution"), and provides a record and replay |
| functionality, including reverse debugging. |
| |
| Target record has two modes: recording, and replaying. |
| |
| In record mode, we intercept the resume and wait methods. |
| Whenever gdb resumes the target, we run the target in single step |
| mode, and we build up an execution log in which, for each executed |
| instruction, we record all changes in memory and register state. |
| This is invisible to the user, to whom it just looks like an |
| ordinary debugging session (except for performance degradation). |
| |
| In replay mode, instead of actually letting the inferior run as a |
| process, we simulate its execution by playing back the recorded |
| execution log. For each instruction in the log, we simulate the |
| instruction's side effects by duplicating the changes that it would |
| have made on memory and registers. */ |
| |
| #define DEFAULT_RECORD_FULL_INSN_MAX_NUM 200000 |
| |
| #define RECORD_FULL_IS_REPLAY \ |
| (record_full_list->next || ::execution_direction == EXEC_REVERSE) |
| |
| #define RECORD_FULL_FILE_MAGIC netorder32(0x20091016) |
| |
| /* These are the core structs of the process record functionality. |
| |
| A record_full_entry is a record of the value change of a register |
| ("record_full_reg") or a part of memory ("record_full_mem"). And each |
| instruction must have a struct record_full_entry ("record_full_end") |
| that indicates that this is the last struct record_full_entry of this |
| instruction. |
| |
| Each struct record_full_entry is linked to "record_full_list" by "prev" |
| and "next" pointers. */ |
| |
| struct record_full_mem_entry |
| { |
| CORE_ADDR addr; |
| int len; |
| /* Set this flag if target memory for this entry |
| can no longer be accessed. */ |
| int mem_entry_not_accessible; |
| union |
| { |
| gdb_byte *ptr; |
| gdb_byte buf[sizeof (gdb_byte *)]; |
| } u; |
| }; |
| |
| struct record_full_reg_entry |
| { |
| unsigned short num; |
| unsigned short len; |
| union |
| { |
| gdb_byte *ptr; |
| gdb_byte buf[2 * sizeof (gdb_byte *)]; |
| } u; |
| }; |
| |
| struct record_full_end_entry |
| { |
| enum gdb_signal sigval; |
| ULONGEST insn_num; |
| }; |
| |
| enum record_full_type |
| { |
| record_full_end = 0, |
| record_full_reg, |
| record_full_mem |
| }; |
| |
| /* This is the data structure that makes up the execution log. |
| |
| The execution log consists of a single linked list of entries |
| of type "struct record_full_entry". It is doubly linked so that it |
| can be traversed in either direction. |
| |
| The start of the list is anchored by a struct called |
| "record_full_first". The pointer "record_full_list" either points |
| to the last entry that was added to the list (in record mode), or to |
| the next entry in the list that will be executed (in replay mode). |
| |
| Each list element (struct record_full_entry), in addition to next |
| and prev pointers, consists of a union of three entry types: mem, |
| reg, and end. A field called "type" determines which entry type is |
| represented by a given list element. |
| |
| Each instruction that is added to the execution log is represented |
| by a variable number of list elements ('entries'). The instruction |
| will have one "reg" entry for each register that is changed by |
| executing the instruction (including the PC in every case). It |
| will also have one "mem" entry for each memory change. Finally, |
| each instruction will have an "end" entry that separates it from |
| the changes associated with the next instruction. */ |
| |
| struct record_full_entry |
| { |
| struct record_full_entry *prev; |
| struct record_full_entry *next; |
| enum record_full_type type; |
| union |
| { |
| /* reg */ |
| struct record_full_reg_entry reg; |
| /* mem */ |
| struct record_full_mem_entry mem; |
| /* end */ |
| struct record_full_end_entry end; |
| } u; |
| }; |
| |
| /* If true, query if PREC cannot record memory |
| change of next instruction. */ |
| bool record_full_memory_query = false; |
| |
| struct record_full_core_buf_entry |
| { |
| struct record_full_core_buf_entry *prev; |
| struct target_section *p; |
| bfd_byte *buf; |
| }; |
| |
| /* Record buf with core target. */ |
| static detached_regcache *record_full_core_regbuf = NULL; |
| static struct target_section *record_full_core_start; |
| static struct target_section *record_full_core_end; |
| static struct record_full_core_buf_entry *record_full_core_buf_list = NULL; |
| |
| /* The following variables are used for managing the linked list that |
| represents the execution log. |
| |
| record_full_first is the anchor that holds down the beginning of |
| the list. |
| |
| record_full_list serves two functions: |
| 1) In record mode, it anchors the end of the list. |
| 2) In replay mode, it traverses the list and points to |
| the next instruction that must be emulated. |
| |
| record_full_arch_list_head and record_full_arch_list_tail are used |
| to manage a separate list, which is used to build up the change |
| elements of the currently executing instruction during record mode. |
| When this instruction has been completely annotated in the "arch |
| list", it will be appended to the main execution log. */ |
| |
| static struct record_full_entry record_full_first; |
| static struct record_full_entry *record_full_list = &record_full_first; |
| static struct record_full_entry *record_full_arch_list_head = NULL; |
| static struct record_full_entry *record_full_arch_list_tail = NULL; |
| |
| /* true ask user. false auto delete the last struct record_full_entry. */ |
| static bool record_full_stop_at_limit = true; |
| /* Maximum allowed number of insns in execution log. */ |
| static unsigned int record_full_insn_max_num |
| = DEFAULT_RECORD_FULL_INSN_MAX_NUM; |
| /* Actual count of insns presently in execution log. */ |
| static unsigned int record_full_insn_num = 0; |
| /* Count of insns logged so far (may be larger |
| than count of insns presently in execution log). */ |
| static ULONGEST record_full_insn_count; |
| |
| static const char record_longname[] |
| = N_("Process record and replay target"); |
| static const char record_doc[] |
| = N_("Log program while executing and replay execution from log."); |
| |
| /* Base class implementing functionality common to both the |
| "record-full" and "record-core" targets. */ |
| |
| class record_full_base_target : public target_ops |
| { |
| public: |
| const target_info &info () const override = 0; |
| |
| strata stratum () const override { return record_stratum; } |
| |
| void close () override; |
| void async (int) override; |
| ptid_t wait (ptid_t, struct target_waitstatus *, int) override; |
| bool stopped_by_watchpoint () override; |
| bool stopped_data_address (CORE_ADDR *) override; |
| |
| bool stopped_by_sw_breakpoint () override; |
| bool supports_stopped_by_sw_breakpoint () override; |
| |
| bool stopped_by_hw_breakpoint () override; |
| bool supports_stopped_by_hw_breakpoint () override; |
| |
| bool can_execute_reverse () override; |
| |
| /* Add bookmark target methods. */ |
| gdb_byte *get_bookmark (const char *, int) override; |
| void goto_bookmark (const gdb_byte *, int) override; |
| enum exec_direction_kind execution_direction () override; |
| enum record_method record_method (ptid_t ptid) override; |
| void info_record () override; |
| void save_record (const char *filename) override; |
| bool supports_delete_record () override; |
| void delete_record () override; |
| bool record_is_replaying (ptid_t ptid) override; |
| bool record_will_replay (ptid_t ptid, int dir) override; |
| void record_stop_replaying () override; |
| void goto_record_begin () override; |
| void goto_record_end () override; |
| void goto_record (ULONGEST insn) override; |
| }; |
| |
| /* The "record-full" target. */ |
| |
| static const target_info record_full_target_info = { |
| "record-full", |
| record_longname, |
| record_doc, |
| }; |
| |
| class record_full_target final : public record_full_base_target |
| { |
| public: |
| const target_info &info () const override |
| { return record_full_target_info; } |
| |
| void commit_resume () override; |
| void resume (ptid_t, int, enum gdb_signal) override; |
| void disconnect (const char *, int) override; |
| void detach (inferior *, int) override; |
| void mourn_inferior () override; |
| void kill () override; |
| void store_registers (struct regcache *, int) override; |
| enum target_xfer_status xfer_partial (enum target_object object, |
| const char *annex, |
| gdb_byte *readbuf, |
| const gdb_byte *writebuf, |
| ULONGEST offset, ULONGEST len, |
| ULONGEST *xfered_len) override; |
| int insert_breakpoint (struct gdbarch *, |
| struct bp_target_info *) override; |
| int remove_breakpoint (struct gdbarch *, |
| struct bp_target_info *, |
| enum remove_bp_reason) override; |
| }; |
| |
| /* The "record-core" target. */ |
| |
| static const target_info record_full_core_target_info = { |
| "record-core", |
| record_longname, |
| record_doc, |
| }; |
| |
| class record_full_core_target final : public record_full_base_target |
| { |
| public: |
| const target_info &info () const override |
| { return record_full_core_target_info; } |
| |
| void resume (ptid_t, int, enum gdb_signal) override; |
| void disconnect (const char *, int) override; |
| void kill () override; |
| void fetch_registers (struct regcache *regcache, int regno) override; |
| void prepare_to_store (struct regcache *regcache) override; |
| void store_registers (struct regcache *, int) override; |
| enum target_xfer_status xfer_partial (enum target_object object, |
| const char *annex, |
| gdb_byte *readbuf, |
| const gdb_byte *writebuf, |
| ULONGEST offset, ULONGEST len, |
| ULONGEST *xfered_len) override; |
| int insert_breakpoint (struct gdbarch *, |
| struct bp_target_info *) override; |
| int remove_breakpoint (struct gdbarch *, |
| struct bp_target_info *, |
| enum remove_bp_reason) override; |
| |
| bool has_execution (inferior *inf) override; |
| }; |
| |
| static record_full_target record_full_ops; |
| static record_full_core_target record_full_core_ops; |
| |
| void |
| record_full_target::detach (inferior *inf, int from_tty) |
| { |
| record_detach (this, inf, from_tty); |
| } |
| |
| void |
| record_full_target::disconnect (const char *args, int from_tty) |
| { |
| record_disconnect (this, args, from_tty); |
| } |
| |
| void |
| record_full_core_target::disconnect (const char *args, int from_tty) |
| { |
| record_disconnect (this, args, from_tty); |
| } |
| |
| void |
| record_full_target::mourn_inferior () |
| { |
| record_mourn_inferior (this); |
| } |
| |
| void |
| record_full_target::kill () |
| { |
| record_kill (this); |
| } |
| |
| /* See record-full.h. */ |
| |
| int |
| record_full_is_used (void) |
| { |
| struct target_ops *t; |
| |
| t = find_record_target (); |
| return (t == &record_full_ops |
| || t == &record_full_core_ops); |
| } |
| |
| |
| /* Command lists for "set/show record full". */ |
| static struct cmd_list_element *set_record_full_cmdlist; |
| static struct cmd_list_element *show_record_full_cmdlist; |
| |
| /* Command list for "record full". */ |
| static struct cmd_list_element *record_full_cmdlist; |
| |
| static void record_full_goto_insn (struct record_full_entry *entry, |
| enum exec_direction_kind dir); |
| |
| /* Alloc and free functions for record_full_reg, record_full_mem, and |
| record_full_end entries. */ |
| |
| /* Alloc a record_full_reg record entry. */ |
| |
| static inline struct record_full_entry * |
| record_full_reg_alloc (struct regcache *regcache, int regnum) |
| { |
| struct record_full_entry *rec; |
| struct gdbarch *gdbarch = regcache->arch (); |
| |
| rec = XCNEW (struct record_full_entry); |
| rec->type = record_full_reg; |
| rec->u.reg.num = regnum; |
| rec->u.reg.len = register_size (gdbarch, regnum); |
| if (rec->u.reg.len > sizeof (rec->u.reg.u.buf)) |
| rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len); |
| |
| return rec; |
| } |
| |
| /* Free a record_full_reg record entry. */ |
| |
| static inline void |
| record_full_reg_release (struct record_full_entry *rec) |
| { |
| gdb_assert (rec->type == record_full_reg); |
| if (rec->u.reg.len > sizeof (rec->u.reg.u.buf)) |
| xfree (rec->u.reg.u.ptr); |
| xfree (rec); |
| } |
| |
| /* Alloc a record_full_mem record entry. */ |
| |
| static inline struct record_full_entry * |
| record_full_mem_alloc (CORE_ADDR addr, int len) |
| { |
| struct record_full_entry *rec; |
| |
| rec = XCNEW (struct record_full_entry); |
| rec->type = record_full_mem; |
| rec->u.mem.addr = addr; |
| rec->u.mem.len = len; |
| if (rec->u.mem.len > sizeof (rec->u.mem.u.buf)) |
| rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len); |
| |
| return rec; |
| } |
| |
| /* Free a record_full_mem record entry. */ |
| |
| static inline void |
| record_full_mem_release (struct record_full_entry *rec) |
| { |
| gdb_assert (rec->type == record_full_mem); |
| if (rec->u.mem.len > sizeof (rec->u.mem.u.buf)) |
| xfree (rec->u.mem.u.ptr); |
| xfree (rec); |
| } |
| |
| /* Alloc a record_full_end record entry. */ |
| |
| static inline struct record_full_entry * |
| record_full_end_alloc (void) |
| { |
| struct record_full_entry *rec; |
| |
| rec = XCNEW (struct record_full_entry); |
| rec->type = record_full_end; |
| |
| return rec; |
| } |
| |
| /* Free a record_full_end record entry. */ |
| |
| static inline void |
| record_full_end_release (struct record_full_entry *rec) |
| { |
| xfree (rec); |
| } |
| |
| /* Free one record entry, any type. |
| Return entry->type, in case caller wants to know. */ |
| |
| static inline enum record_full_type |
| record_full_entry_release (struct record_full_entry *rec) |
| { |
| enum record_full_type type = rec->type; |
| |
| switch (type) { |
| case record_full_reg: |
| record_full_reg_release (rec); |
| break; |
| case record_full_mem: |
| record_full_mem_release (rec); |
| break; |
| case record_full_end: |
| record_full_end_release (rec); |
| break; |
| } |
| return type; |
| } |
| |
| /* Free all record entries in list pointed to by REC. */ |
| |
| static void |
| record_full_list_release (struct record_full_entry *rec) |
| { |
| if (!rec) |
| return; |
| |
| while (rec->next) |
| rec = rec->next; |
| |
| while (rec->prev) |
| { |
| rec = rec->prev; |
| record_full_entry_release (rec->next); |
| } |
| |
| if (rec == &record_full_first) |
| { |
| record_full_insn_num = 0; |
| record_full_first.next = NULL; |
| } |
| else |
| record_full_entry_release (rec); |
| } |
| |
| /* Free all record entries forward of the given list position. */ |
| |
| static void |
| record_full_list_release_following (struct record_full_entry *rec) |
| { |
| struct record_full_entry *tmp = rec->next; |
| |
| rec->next = NULL; |
| while (tmp) |
| { |
| rec = tmp->next; |
| if (record_full_entry_release (tmp) == record_full_end) |
| { |
| record_full_insn_num--; |
| record_full_insn_count--; |
| } |
| tmp = rec; |
| } |
| } |
| |
| /* Delete the first instruction from the beginning of the log, to make |
| room for adding a new instruction at the end of the log. |
| |
| Note -- this function does not modify record_full_insn_num. */ |
| |
| static void |
| record_full_list_release_first (void) |
| { |
| struct record_full_entry *tmp; |
| |
| if (!record_full_first.next) |
| return; |
| |
| /* Loop until a record_full_end. */ |
| while (1) |
| { |
| /* Cut record_full_first.next out of the linked list. */ |
| tmp = record_full_first.next; |
| record_full_first.next = tmp->next; |
| tmp->next->prev = &record_full_first; |
| |
| /* tmp is now isolated, and can be deleted. */ |
| if (record_full_entry_release (tmp) == record_full_end) |
| break; /* End loop at first record_full_end. */ |
| |
| if (!record_full_first.next) |
| { |
| gdb_assert (record_full_insn_num == 1); |
| break; /* End loop when list is empty. */ |
| } |
| } |
| } |
| |
| /* Add a struct record_full_entry to record_full_arch_list. */ |
| |
| static void |
| record_full_arch_list_add (struct record_full_entry *rec) |
| { |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: record_full_arch_list_add %s.\n", |
| host_address_to_string (rec)); |
| |
| if (record_full_arch_list_tail) |
| { |
| record_full_arch_list_tail->next = rec; |
| rec->prev = record_full_arch_list_tail; |
| record_full_arch_list_tail = rec; |
| } |
| else |
| { |
| record_full_arch_list_head = rec; |
| record_full_arch_list_tail = rec; |
| } |
| } |
| |
| /* Return the value storage location of a record entry. */ |
| static inline gdb_byte * |
| record_full_get_loc (struct record_full_entry *rec) |
| { |
| switch (rec->type) { |
| case record_full_mem: |
| if (rec->u.mem.len > sizeof (rec->u.mem.u.buf)) |
| return rec->u.mem.u.ptr; |
| else |
| return rec->u.mem.u.buf; |
| case record_full_reg: |
| if (rec->u.reg.len > sizeof (rec->u.reg.u.buf)) |
| return rec->u.reg.u.ptr; |
| else |
| return rec->u.reg.u.buf; |
| case record_full_end: |
| default: |
| gdb_assert_not_reached ("unexpected record_full_entry type"); |
| return NULL; |
| } |
| } |
| |
| /* Record the value of a register NUM to record_full_arch_list. */ |
| |
| int |
| record_full_arch_list_add_reg (struct regcache *regcache, int regnum) |
| { |
| struct record_full_entry *rec; |
| |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: add register num = %d to " |
| "record list.\n", |
| regnum); |
| |
| rec = record_full_reg_alloc (regcache, regnum); |
| |
| regcache->raw_read (regnum, record_full_get_loc (rec)); |
| |
| record_full_arch_list_add (rec); |
| |
| return 0; |
| } |
| |
| /* Record the value of a region of memory whose address is ADDR and |
| length is LEN to record_full_arch_list. */ |
| |
| int |
| record_full_arch_list_add_mem (CORE_ADDR addr, int len) |
| { |
| struct record_full_entry *rec; |
| |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: add mem addr = %s len = %d to " |
| "record list.\n", |
| paddress (target_gdbarch (), addr), len); |
| |
| if (!addr) /* FIXME: Why? Some arch must permit it... */ |
| return 0; |
| |
| rec = record_full_mem_alloc (addr, len); |
| |
| if (record_read_memory (target_gdbarch (), addr, |
| record_full_get_loc (rec), len)) |
| { |
| record_full_mem_release (rec); |
| return -1; |
| } |
| |
| record_full_arch_list_add (rec); |
| |
| return 0; |
| } |
| |
| /* Add a record_full_end type struct record_full_entry to |
| record_full_arch_list. */ |
| |
| int |
| record_full_arch_list_add_end (void) |
| { |
| struct record_full_entry *rec; |
| |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: add end to arch list.\n"); |
| |
| rec = record_full_end_alloc (); |
| rec->u.end.sigval = GDB_SIGNAL_0; |
| rec->u.end.insn_num = ++record_full_insn_count; |
| |
| record_full_arch_list_add (rec); |
| |
| return 0; |
| } |
| |
| static void |
| record_full_check_insn_num (void) |
| { |
| if (record_full_insn_num == record_full_insn_max_num) |
| { |
| /* Ask user what to do. */ |
| if (record_full_stop_at_limit) |
| { |
| if (!yquery (_("Do you want to auto delete previous execution " |
| "log entries when record/replay buffer becomes " |
| "full (record full stop-at-limit)?"))) |
| error (_("Process record: stopped by user.")); |
| record_full_stop_at_limit = 0; |
| } |
| } |
| } |
| |
| /* Before inferior step (when GDB record the running message, inferior |
| only can step), GDB will call this function to record the values to |
| record_full_list. This function will call gdbarch_process_record to |
| record the running message of inferior and set them to |
| record_full_arch_list, and add it to record_full_list. */ |
| |
| static void |
| record_full_message (struct regcache *regcache, enum gdb_signal signal) |
| { |
| int ret; |
| struct gdbarch *gdbarch = regcache->arch (); |
| |
| try |
| { |
| record_full_arch_list_head = NULL; |
| record_full_arch_list_tail = NULL; |
| |
| /* Check record_full_insn_num. */ |
| record_full_check_insn_num (); |
| |
| /* If gdb sends a signal value to target_resume, |
| save it in the 'end' field of the previous instruction. |
| |
| Maybe process record should record what really happened, |
| rather than what gdb pretends has happened. |
| |
| So if Linux delivered the signal to the child process during |
| the record mode, we will record it and deliver it again in |
| the replay mode. |
| |
| If user says "ignore this signal" during the record mode, then |
| it will be ignored again during the replay mode (no matter if |
| the user says something different, like "deliver this signal" |
| during the replay mode). |
| |
| User should understand that nothing he does during the replay |
| mode will change the behavior of the child. If he tries, |
| then that is a user error. |
| |
| But we should still deliver the signal to gdb during the replay, |
| if we delivered it during the recording. Therefore we should |
| record the signal during record_full_wait, not |
| record_full_resume. */ |
| if (record_full_list != &record_full_first) /* FIXME better way |
| to check */ |
| { |
| gdb_assert (record_full_list->type == record_full_end); |
| record_full_list->u.end.sigval = signal; |
| } |
| |
| if (signal == GDB_SIGNAL_0 |
| || !gdbarch_process_record_signal_p (gdbarch)) |
| ret = gdbarch_process_record (gdbarch, |
| regcache, |
| regcache_read_pc (regcache)); |
| else |
| ret = gdbarch_process_record_signal (gdbarch, |
| regcache, |
| signal); |
| |
| if (ret > 0) |
| error (_("Process record: inferior program stopped.")); |
| if (ret < 0) |
| error (_("Process record: failed to record execution log.")); |
| } |
| catch (const gdb_exception &ex) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| throw; |
| } |
| |
| record_full_list->next = record_full_arch_list_head; |
| record_full_arch_list_head->prev = record_full_list; |
| record_full_list = record_full_arch_list_tail; |
| |
| if (record_full_insn_num == record_full_insn_max_num) |
| record_full_list_release_first (); |
| else |
| record_full_insn_num++; |
| } |
| |
| static bool |
| record_full_message_wrapper_safe (struct regcache *regcache, |
| enum gdb_signal signal) |
| { |
| try |
| { |
| record_full_message (regcache, signal); |
| } |
| catch (const gdb_exception &ex) |
| { |
| exception_print (gdb_stderr, ex); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Set to 1 if record_full_store_registers and record_full_xfer_partial |
| doesn't need record. */ |
| |
| static int record_full_gdb_operation_disable = 0; |
| |
| scoped_restore_tmpl<int> |
| record_full_gdb_operation_disable_set (void) |
| { |
| return make_scoped_restore (&record_full_gdb_operation_disable, 1); |
| } |
| |
| /* Flag set to TRUE for target_stopped_by_watchpoint. */ |
| static enum target_stop_reason record_full_stop_reason |
| = TARGET_STOPPED_BY_NO_REASON; |
| |
| /* Execute one instruction from the record log. Each instruction in |
| the log will be represented by an arbitrary sequence of register |
| entries and memory entries, followed by an 'end' entry. */ |
| |
| static inline void |
| record_full_exec_insn (struct regcache *regcache, |
| struct gdbarch *gdbarch, |
| struct record_full_entry *entry) |
| { |
| switch (entry->type) |
| { |
| case record_full_reg: /* reg */ |
| { |
| gdb::byte_vector reg (entry->u.reg.len); |
| |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: record_full_reg %s to " |
| "inferior num = %d.\n", |
| host_address_to_string (entry), |
| entry->u.reg.num); |
| |
| regcache->cooked_read (entry->u.reg.num, reg.data ()); |
| regcache->cooked_write (entry->u.reg.num, record_full_get_loc (entry)); |
| memcpy (record_full_get_loc (entry), reg.data (), entry->u.reg.len); |
| } |
| break; |
| |
| case record_full_mem: /* mem */ |
| { |
| /* Nothing to do if the entry is flagged not_accessible. */ |
| if (!entry->u.mem.mem_entry_not_accessible) |
| { |
| gdb::byte_vector mem (entry->u.mem.len); |
| |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: record_full_mem %s to " |
| "inferior addr = %s len = %d.\n", |
| host_address_to_string (entry), |
| paddress (gdbarch, entry->u.mem.addr), |
| entry->u.mem.len); |
| |
| if (record_read_memory (gdbarch, |
| entry->u.mem.addr, mem.data (), |
| entry->u.mem.len)) |
| entry->u.mem.mem_entry_not_accessible = 1; |
| else |
| { |
| if (target_write_memory (entry->u.mem.addr, |
| record_full_get_loc (entry), |
| entry->u.mem.len)) |
| { |
| entry->u.mem.mem_entry_not_accessible = 1; |
| if (record_debug) |
| warning (_("Process record: error writing memory at " |
| "addr = %s len = %d."), |
| paddress (gdbarch, entry->u.mem.addr), |
| entry->u.mem.len); |
| } |
| else |
| { |
| memcpy (record_full_get_loc (entry), mem.data (), |
| entry->u.mem.len); |
| |
| /* We've changed memory --- check if a hardware |
| watchpoint should trap. Note that this |
| presently assumes the target beneath supports |
| continuable watchpoints. On non-continuable |
| watchpoints target, we'll want to check this |
| _before_ actually doing the memory change, and |
| not doing the change at all if the watchpoint |
| traps. */ |
| if (hardware_watchpoint_inserted_in_range |
| (regcache->aspace (), |
| entry->u.mem.addr, entry->u.mem.len)) |
| record_full_stop_reason = TARGET_STOPPED_BY_WATCHPOINT; |
| } |
| } |
| } |
| } |
| break; |
| } |
| } |
| |
| static void record_full_restore (void); |
| |
| /* Asynchronous signal handle registered as event loop source for when |
| we have pending events ready to be passed to the core. */ |
| |
| static struct async_event_handler *record_full_async_inferior_event_token; |
| |
| static void |
| record_full_async_inferior_event_handler (gdb_client_data data) |
| { |
| inferior_event_handler (INF_REG_EVENT, NULL); |
| } |
| |
| /* Open the process record target for 'core' files. */ |
| |
| static void |
| record_full_core_open_1 (const char *name, int from_tty) |
| { |
| struct regcache *regcache = get_current_regcache (); |
| int regnum = gdbarch_num_regs (regcache->arch ()); |
| int i; |
| |
| /* Get record_full_core_regbuf. */ |
| target_fetch_registers (regcache, -1); |
| record_full_core_regbuf = new detached_regcache (regcache->arch (), false); |
| |
| for (i = 0; i < regnum; i ++) |
| record_full_core_regbuf->raw_supply (i, *regcache); |
| |
| /* Get record_full_core_start and record_full_core_end. */ |
| if (build_section_table (core_bfd, &record_full_core_start, |
| &record_full_core_end)) |
| { |
| delete record_full_core_regbuf; |
| record_full_core_regbuf = NULL; |
| error (_("\"%s\": Can't find sections: %s"), |
| bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ())); |
| } |
| |
| push_target (&record_full_core_ops); |
| record_full_restore (); |
| } |
| |
| /* Open the process record target for 'live' processes. */ |
| |
| static void |
| record_full_open_1 (const char *name, int from_tty) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open_1\n"); |
| |
| /* check exec */ |
| if (!target_has_execution) |
| error (_("Process record: the program is not being run.")); |
| if (non_stop) |
| error (_("Process record target can't debug inferior in non-stop mode " |
| "(non-stop).")); |
| |
| if (!gdbarch_process_record_p (target_gdbarch ())) |
| error (_("Process record: the current architecture doesn't support " |
| "record function.")); |
| |
| push_target (&record_full_ops); |
| } |
| |
| static void record_full_init_record_breakpoints (void); |
| |
| /* Open the process record target. */ |
| |
| static void |
| record_full_open (const char *name, int from_tty) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n"); |
| |
| record_preopen (); |
| |
| /* Reset */ |
| record_full_insn_num = 0; |
| record_full_insn_count = 0; |
| record_full_list = &record_full_first; |
| record_full_list->next = NULL; |
| |
| if (core_bfd) |
| record_full_core_open_1 (name, from_tty); |
| else |
| record_full_open_1 (name, from_tty); |
| |
| /* Register extra event sources in the event loop. */ |
| record_full_async_inferior_event_token |
| = create_async_event_handler (record_full_async_inferior_event_handler, |
| NULL); |
| |
| record_full_init_record_breakpoints (); |
| |
| gdb::observers::record_changed.notify (current_inferior (), 1, "full", NULL); |
| } |
| |
| /* "close" target method. Close the process record target. */ |
| |
| void |
| record_full_base_target::close () |
| { |
| struct record_full_core_buf_entry *entry; |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n"); |
| |
| record_full_list_release (record_full_list); |
| |
| /* Release record_full_core_regbuf. */ |
| if (record_full_core_regbuf) |
| { |
| delete record_full_core_regbuf; |
| record_full_core_regbuf = NULL; |
| } |
| |
| /* Release record_full_core_buf_list. */ |
| while (record_full_core_buf_list) |
| { |
| entry = record_full_core_buf_list; |
| record_full_core_buf_list = record_full_core_buf_list->prev; |
| xfree (entry); |
| } |
| |
| if (record_full_async_inferior_event_token) |
| delete_async_event_handler (&record_full_async_inferior_event_token); |
| } |
| |
| /* "async" target method. */ |
| |
| void |
| record_full_base_target::async (int enable) |
| { |
| if (enable) |
| mark_async_event_handler (record_full_async_inferior_event_token); |
| else |
| clear_async_event_handler (record_full_async_inferior_event_token); |
| |
| beneath ()->async (enable); |
| } |
| |
| /* The PTID and STEP arguments last passed to |
| record_full_target::resume. */ |
| static ptid_t record_full_resume_ptid = null_ptid; |
| static int record_full_resume_step = 0; |
| |
| /* True if we've been resumed, and so each record_full_wait call should |
| advance execution. If this is false, record_full_wait will return a |
| TARGET_WAITKIND_IGNORE. */ |
| static int record_full_resumed = 0; |
| |
| /* The execution direction of the last resume we got. This is |
| necessary for async mode. Vis (order is not strictly accurate): |
| |
| 1. user has the global execution direction set to forward |
| 2. user does a reverse-step command |
| 3. record_full_resume is called with global execution direction |
| temporarily switched to reverse |
| 4. GDB's execution direction is reverted back to forward |
| 5. target record notifies event loop there's an event to handle |
| 6. infrun asks the target which direction was it going, and switches |
| the global execution direction accordingly (to reverse) |
| 7. infrun polls an event out of the record target, and handles it |
| 8. GDB goes back to the event loop, and goto #4. |
| */ |
| static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD; |
| |
| /* "resume" target method. Resume the process record target. */ |
| |
| void |
| record_full_target::resume (ptid_t ptid, int step, enum gdb_signal signal) |
| { |
| record_full_resume_ptid = inferior_ptid; |
| record_full_resume_step = step; |
| record_full_resumed = 1; |
| record_full_execution_dir = ::execution_direction; |
| |
| if (!RECORD_FULL_IS_REPLAY) |
| { |
| struct gdbarch *gdbarch = target_thread_architecture (ptid); |
| |
| record_full_message (get_current_regcache (), signal); |
| |
| if (!step) |
| { |
| /* This is not hard single step. */ |
| if (!gdbarch_software_single_step_p (gdbarch)) |
| { |
| /* This is a normal continue. */ |
| step = 1; |
| } |
| else |
| { |
| /* This arch supports soft single step. */ |
| if (thread_has_single_step_breakpoints_set (inferior_thread ())) |
| { |
| /* This is a soft single step. */ |
| record_full_resume_step = 1; |
| } |
| else |
| step = !insert_single_step_breakpoints (gdbarch); |
| } |
| } |
| |
| /* Make sure the target beneath reports all signals. */ |
| target_pass_signals ({}); |
| |
| this->beneath ()->resume (ptid, step, signal); |
| } |
| |
| /* We are about to start executing the inferior (or simulate it), |
| let's register it with the event loop. */ |
| if (target_can_async_p ()) |
| target_async (1); |
| } |
| |
| /* "commit_resume" method for process record target. */ |
| |
| void |
| record_full_target::commit_resume () |
| { |
| if (!RECORD_FULL_IS_REPLAY) |
| beneath ()->commit_resume (); |
| } |
| |
| static int record_full_get_sig = 0; |
| |
| /* SIGINT signal handler, registered by "wait" method. */ |
| |
| static void |
| record_full_sig_handler (int signo) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n"); |
| |
| /* It will break the running inferior in replay mode. */ |
| record_full_resume_step = 1; |
| |
| /* It will let record_full_wait set inferior status to get the signal |
| SIGINT. */ |
| record_full_get_sig = 1; |
| } |
| |
| /* "wait" target method for process record target. |
| |
| In record mode, the target is always run in singlestep mode |
| (even when gdb says to continue). The wait method intercepts |
| the stop events and determines which ones are to be passed on to |
| gdb. Most stop events are just singlestep events that gdb is not |
| to know about, so the wait method just records them and keeps |
| singlestepping. |
| |
| In replay mode, this function emulates the recorded execution log, |
| one instruction at a time (forward or backward), and determines |
| where to stop. */ |
| |
| static ptid_t |
| record_full_wait_1 (struct target_ops *ops, |
| ptid_t ptid, struct target_waitstatus *status, |
| int options) |
| { |
| scoped_restore restore_operation_disable |
| = record_full_gdb_operation_disable_set (); |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: record_full_wait " |
| "record_full_resume_step = %d, " |
| "record_full_resumed = %d, direction=%s\n", |
| record_full_resume_step, record_full_resumed, |
| record_full_execution_dir == EXEC_FORWARD |
| ? "forward" : "reverse"); |
| |
| if (!record_full_resumed) |
| { |
| gdb_assert ((options & TARGET_WNOHANG) != 0); |
| |
| /* No interesting event. */ |
| status->kind = TARGET_WAITKIND_IGNORE; |
| return minus_one_ptid; |
| } |
| |
| record_full_get_sig = 0; |
| signal (SIGINT, record_full_sig_handler); |
| |
| record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON; |
| |
| if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops) |
| { |
| if (record_full_resume_step) |
| { |
| /* This is a single step. */ |
| return ops->beneath ()->wait (ptid, status, options); |
| } |
| else |
| { |
| /* This is not a single step. */ |
| ptid_t ret; |
| CORE_ADDR tmp_pc; |
| struct gdbarch *gdbarch |
| = target_thread_architecture (record_full_resume_ptid); |
| |
| while (1) |
| { |
| ret = ops->beneath ()->wait (ptid, status, options); |
| if (status->kind == TARGET_WAITKIND_IGNORE) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: record_full_wait " |
| "target beneath not done yet\n"); |
| return ret; |
| } |
| |
| for (thread_info *tp : all_non_exited_threads ()) |
| delete_single_step_breakpoints (tp); |
| |
| if (record_full_resume_step) |
| return ret; |
| |
| /* Is this a SIGTRAP? */ |
| if (status->kind == TARGET_WAITKIND_STOPPED |
| && status->value.sig == GDB_SIGNAL_TRAP) |
| { |
| struct regcache *regcache; |
| enum target_stop_reason *stop_reason_p |
| = &record_full_stop_reason; |
| |
| /* Yes -- this is likely our single-step finishing, |
| but check if there's any reason the core would be |
| interested in the event. */ |
| |
| registers_changed (); |
| switch_to_thread (current_inferior ()->process_target (), |
| ret); |
| regcache = get_current_regcache (); |
| tmp_pc = regcache_read_pc (regcache); |
| const struct address_space *aspace = regcache->aspace (); |
| |
| if (target_stopped_by_watchpoint ()) |
| { |
| /* Always interested in watchpoints. */ |
| } |
| else if (record_check_stopped_by_breakpoint (aspace, tmp_pc, |
| stop_reason_p)) |
| { |
| /* There is a breakpoint here. Let the core |
| handle it. */ |
| } |
| else |
| { |
| /* This is a single-step trap. Record the |
| insn and issue another step. |
| FIXME: this part can be a random SIGTRAP too. |
| But GDB cannot handle it. */ |
| int step = 1; |
| |
| if (!record_full_message_wrapper_safe (regcache, |
| GDB_SIGNAL_0)) |
| { |
| status->kind = TARGET_WAITKIND_STOPPED; |
| status->value.sig = GDB_SIGNAL_0; |
| break; |
| } |
| |
| if (gdbarch_software_single_step_p (gdbarch)) |
| { |
| process_stratum_target *proc_target |
| = current_inferior ()->process_target (); |
| |
| /* Try to insert the software single step breakpoint. |
| If insert success, set step to 0. */ |
| set_executing (proc_target, inferior_ptid, false); |
| reinit_frame_cache (); |
| |
| step = !insert_single_step_breakpoints (gdbarch); |
| |
| set_executing (proc_target, inferior_ptid, true); |
| } |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: record_full_wait " |
| "issuing one more step in the " |
| "target beneath\n"); |
| ops->beneath ()->resume (ptid, step, GDB_SIGNAL_0); |
| ops->beneath ()->commit_resume (); |
| continue; |
| } |
| } |
| |
| /* The inferior is broken by a breakpoint or a signal. */ |
| break; |
| } |
| |
| return ret; |
| } |
| } |
| else |
| { |
| switch_to_thread (current_inferior ()->process_target (), |
| record_full_resume_ptid); |
| struct regcache *regcache = get_current_regcache (); |
| struct gdbarch *gdbarch = regcache->arch (); |
| const struct address_space *aspace = regcache->aspace (); |
| int continue_flag = 1; |
| int first_record_full_end = 1; |
| |
| try |
| { |
| CORE_ADDR tmp_pc; |
| |
| record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON; |
| status->kind = TARGET_WAITKIND_STOPPED; |
| |
| /* Check breakpoint when forward execute. */ |
| if (execution_direction == EXEC_FORWARD) |
| { |
| tmp_pc = regcache_read_pc (regcache); |
| if (record_check_stopped_by_breakpoint (aspace, tmp_pc, |
| &record_full_stop_reason)) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: break at %s.\n", |
| paddress (gdbarch, tmp_pc)); |
| goto replay_out; |
| } |
| } |
| |
| /* If GDB is in terminal_inferior mode, it will not get the |
| signal. And in GDB replay mode, GDB doesn't need to be |
| in terminal_inferior mode, because inferior will not |
| executed. Then set it to terminal_ours to make GDB get |
| the signal. */ |
| target_terminal::ours (); |
| |
| /* In EXEC_FORWARD mode, record_full_list points to the tail of prev |
| instruction. */ |
| if (execution_direction == EXEC_FORWARD && record_full_list->next) |
| record_full_list = record_full_list->next; |
| |
| /* Loop over the record_full_list, looking for the next place to |
| stop. */ |
| do |
| { |
| /* Check for beginning and end of log. */ |
| if (execution_direction == EXEC_REVERSE |
| && record_full_list == &record_full_first) |
| { |
| /* Hit beginning of record log in reverse. */ |
| status->kind = TARGET_WAITKIND_NO_HISTORY; |
| break; |
| } |
| if (execution_direction != EXEC_REVERSE |
| && !record_full_list->next) |
| { |
| /* Hit end of record log going forward. */ |
| status->kind = TARGET_WAITKIND_NO_HISTORY; |
| break; |
| } |
| |
| record_full_exec_insn (regcache, gdbarch, record_full_list); |
| |
| if (record_full_list->type == record_full_end) |
| { |
| if (record_debug > 1) |
| fprintf_unfiltered |
| (gdb_stdlog, |
| "Process record: record_full_end %s to " |
| "inferior.\n", |
| host_address_to_string (record_full_list)); |
| |
| if (first_record_full_end |
| && execution_direction == EXEC_REVERSE) |
| { |
| /* When reverse execute, the first |
| record_full_end is the part of current |
| instruction. */ |
| first_record_full_end = 0; |
| } |
| else |
| { |
| /* In EXEC_REVERSE mode, this is the |
| record_full_end of prev instruction. In |
| EXEC_FORWARD mode, this is the |
| record_full_end of current instruction. */ |
| /* step */ |
| if (record_full_resume_step) |
| { |
| if (record_debug > 1) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: step.\n"); |
| continue_flag = 0; |
| } |
| |
| /* check breakpoint */ |
| tmp_pc = regcache_read_pc (regcache); |
| if (record_check_stopped_by_breakpoint |
| (aspace, tmp_pc, &record_full_stop_reason)) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: break " |
| "at %s.\n", |
| paddress (gdbarch, tmp_pc)); |
| |
| continue_flag = 0; |
| } |
| |
| if (record_full_stop_reason |
| == TARGET_STOPPED_BY_WATCHPOINT) |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: hit hw " |
| "watchpoint.\n"); |
| continue_flag = 0; |
| } |
| /* Check target signal */ |
| if (record_full_list->u.end.sigval != GDB_SIGNAL_0) |
| /* FIXME: better way to check */ |
| continue_flag = 0; |
| } |
| } |
| |
| if (continue_flag) |
| { |
| if (execution_direction == EXEC_REVERSE) |
| { |
| if (record_full_list->prev) |
| record_full_list = record_full_list->prev; |
| } |
| else |
| { |
| if (record_full_list->next) |
| record_full_list = record_full_list->next; |
| } |
| } |
| } |
| while (continue_flag); |
| |
| replay_out: |
| if (record_full_get_sig) |
| status->value.sig = GDB_SIGNAL_INT; |
| else if (record_full_list->u.end.sigval != GDB_SIGNAL_0) |
| /* FIXME: better way to check */ |
| status->value.sig = record_full_list->u.end.sigval; |
| else |
| status->value.sig = GDB_SIGNAL_TRAP; |
| } |
| catch (const gdb_exception &ex) |
| { |
| if (execution_direction == EXEC_REVERSE) |
| { |
| if (record_full_list->next) |
| record_full_list = record_full_list->next; |
| } |
| else |
| record_full_list = record_full_list->prev; |
| |
| throw; |
| } |
| } |
| |
| signal (SIGINT, handle_sigint); |
| |
| return inferior_ptid; |
| } |
| |
| ptid_t |
| record_full_base_target::wait (ptid_t ptid, struct target_waitstatus *status, |
| int options) |
| { |
| ptid_t return_ptid; |
| |
| return_ptid = record_full_wait_1 (this, ptid, status, options); |
| if (status->kind != TARGET_WAITKIND_IGNORE) |
| { |
| /* We're reporting a stop. Make sure any spurious |
| target_wait(WNOHANG) doesn't advance the target until the |
| core wants us resumed again. */ |
| record_full_resumed = 0; |
| } |
| return return_ptid; |
| } |
| |
| bool |
| record_full_base_target::stopped_by_watchpoint () |
| { |
| if (RECORD_FULL_IS_REPLAY) |
| return record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT; |
| else |
| return beneath ()->stopped_by_watchpoint (); |
| } |
| |
| bool |
| record_full_base_target::stopped_data_address (CORE_ADDR *addr_p) |
| { |
| if (RECORD_FULL_IS_REPLAY) |
| return false; |
| else |
| return this->beneath ()->stopped_data_address (addr_p); |
| } |
| |
| /* The stopped_by_sw_breakpoint method of target record-full. */ |
| |
| bool |
| record_full_base_target::stopped_by_sw_breakpoint () |
| { |
| return record_full_stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT; |
| } |
| |
| /* The supports_stopped_by_sw_breakpoint method of target |
| record-full. */ |
| |
| bool |
| record_full_base_target::supports_stopped_by_sw_breakpoint () |
| { |
| return true; |
| } |
| |
| /* The stopped_by_hw_breakpoint method of target record-full. */ |
| |
| bool |
| record_full_base_target::stopped_by_hw_breakpoint () |
| { |
| return record_full_stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT; |
| } |
| |
| /* The supports_stopped_by_sw_breakpoint method of target |
| record-full. */ |
| |
| bool |
| record_full_base_target::supports_stopped_by_hw_breakpoint () |
| { |
| return true; |
| } |
| |
| /* Record registers change (by user or by GDB) to list as an instruction. */ |
| |
| static void |
| record_full_registers_change (struct regcache *regcache, int regnum) |
| { |
| /* Check record_full_insn_num. */ |
| record_full_check_insn_num (); |
| |
| record_full_arch_list_head = NULL; |
| record_full_arch_list_tail = NULL; |
| |
| if (regnum < 0) |
| { |
| int i; |
| |
| for (i = 0; i < gdbarch_num_regs (regcache->arch ()); i++) |
| { |
| if (record_full_arch_list_add_reg (regcache, i)) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| error (_("Process record: failed to record execution log.")); |
| } |
| } |
| } |
| else |
| { |
| if (record_full_arch_list_add_reg (regcache, regnum)) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| error (_("Process record: failed to record execution log.")); |
| } |
| } |
| if (record_full_arch_list_add_end ()) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| error (_("Process record: failed to record execution log.")); |
| } |
| record_full_list->next = record_full_arch_list_head; |
| record_full_arch_list_head->prev = record_full_list; |
| record_full_list = record_full_arch_list_tail; |
| |
| if (record_full_insn_num == record_full_insn_max_num) |
| record_full_list_release_first (); |
| else |
| record_full_insn_num++; |
| } |
| |
| /* "store_registers" method for process record target. */ |
| |
| void |
| record_full_target::store_registers (struct regcache *regcache, int regno) |
| { |
| if (!record_full_gdb_operation_disable) |
| { |
| if (RECORD_FULL_IS_REPLAY) |
| { |
| int n; |
| |
| /* Let user choose if he wants to write register or not. */ |
| if (regno < 0) |
| n = |
| query (_("Because GDB is in replay mode, changing the " |
| "value of a register will make the execution " |
| "log unusable from this point onward. " |
| "Change all registers?")); |
| else |
| n = |
| query (_("Because GDB is in replay mode, changing the value " |
| "of a register will make the execution log unusable " |
| "from this point onward. Change register %s?"), |
| gdbarch_register_name (regcache->arch (), |
| regno)); |
| |
| if (!n) |
| { |
| /* Invalidate the value of regcache that was set in function |
| "regcache_raw_write". */ |
| if (regno < 0) |
| { |
| int i; |
| |
| for (i = 0; |
| i < gdbarch_num_regs (regcache->arch ()); |
| i++) |
| regcache->invalidate (i); |
| } |
| else |
| regcache->invalidate (regno); |
| |
| error (_("Process record canceled the operation.")); |
| } |
| |
| /* Destroy the record from here forward. */ |
| record_full_list_release_following (record_full_list); |
| } |
| |
| record_full_registers_change (regcache, regno); |
| } |
| this->beneath ()->store_registers (regcache, regno); |
| } |
| |
| /* "xfer_partial" method. Behavior is conditional on |
| RECORD_FULL_IS_REPLAY. |
| In replay mode, we cannot write memory unles we are willing to |
| invalidate the record/replay log from this point forward. */ |
| |
| enum target_xfer_status |
| record_full_target::xfer_partial (enum target_object object, |
| const char *annex, gdb_byte *readbuf, |
| const gdb_byte *writebuf, ULONGEST offset, |
| ULONGEST len, ULONGEST *xfered_len) |
| { |
| if (!record_full_gdb_operation_disable |
| && (object == TARGET_OBJECT_MEMORY |
| || object == TARGET_OBJECT_RAW_MEMORY) && writebuf) |
| { |
| if (RECORD_FULL_IS_REPLAY) |
| { |
| /* Let user choose if he wants to write memory or not. */ |
| if (!query (_("Because GDB is in replay mode, writing to memory " |
| "will make the execution log unusable from this " |
| "point onward. Write memory at address %s?"), |
| paddress (target_gdbarch (), offset))) |
| error (_("Process record canceled the operation.")); |
| |
| /* Destroy the record from here forward. */ |
| record_full_list_release_following (record_full_list); |
| } |
| |
| /* Check record_full_insn_num */ |
| record_full_check_insn_num (); |
| |
| /* Record registers change to list as an instruction. */ |
| record_full_arch_list_head = NULL; |
| record_full_arch_list_tail = NULL; |
| if (record_full_arch_list_add_mem (offset, len)) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: failed to record " |
| "execution log."); |
| return TARGET_XFER_E_IO; |
| } |
| if (record_full_arch_list_add_end ()) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "Process record: failed to record " |
| "execution log."); |
| return TARGET_XFER_E_IO; |
| } |
| record_full_list->next = record_full_arch_list_head; |
| record_full_arch_list_head->prev = record_full_list; |
| record_full_list = record_full_arch_list_tail; |
| |
| if (record_full_insn_num == record_full_insn_max_num) |
| record_full_list_release_first (); |
| else |
| record_full_insn_num++; |
| } |
| |
| return this->beneath ()->xfer_partial (object, annex, readbuf, writebuf, |
| offset, len, xfered_len); |
| } |
| |
| /* This structure represents a breakpoint inserted while the record |
| target is active. We use this to know when to install/remove |
| breakpoints in/from the target beneath. For example, a breakpoint |
| may be inserted while recording, but removed when not replaying nor |
| recording. In that case, the breakpoint had not been inserted on |
| the target beneath, so we should not try to remove it there. */ |
| |
| struct record_full_breakpoint |
| { |
| record_full_breakpoint (struct address_space *address_space_, |
| CORE_ADDR addr_, |
| bool in_target_beneath_) |
| : address_space (address_space_), |
| addr (addr_), |
| in_target_beneath (in_target_beneath_) |
| { |
| } |
| |
| /* The address and address space the breakpoint was set at. */ |
| struct address_space *address_space; |
| CORE_ADDR addr; |
| |
| /* True when the breakpoint has been also installed in the target |
| beneath. This will be false for breakpoints set during replay or |
| when recording. */ |
| bool in_target_beneath; |
| }; |
| |
| /* The list of breakpoints inserted while the record target is |
| active. */ |
| static std::vector<record_full_breakpoint> record_full_breakpoints; |
| |
| static void |
| record_full_sync_record_breakpoints (struct bp_location *loc, void *data) |
| { |
| if (loc->loc_type != bp_loc_software_breakpoint) |
| return; |
| |
| if (loc->inserted) |
| { |
| record_full_breakpoints.emplace_back |
| (loc->target_info.placed_address_space, |
| loc->target_info.placed_address, |
| 1); |
| } |
| } |
| |
| /* Sync existing breakpoints to record_full_breakpoints. */ |
| |
| static void |
| record_full_init_record_breakpoints (void) |
| { |
| record_full_breakpoints.clear (); |
| |
| iterate_over_bp_locations (record_full_sync_record_breakpoints); |
| } |
| |
| /* Behavior is conditional on RECORD_FULL_IS_REPLAY. We will not actually |
| insert or remove breakpoints in the real target when replaying, nor |
| when recording. */ |
| |
| int |
| record_full_target::insert_breakpoint (struct gdbarch *gdbarch, |
| struct bp_target_info *bp_tgt) |
| { |
| bool in_target_beneath = false; |
| |
| if (!RECORD_FULL_IS_REPLAY) |
| { |
| /* When recording, we currently always single-step, so we don't |
| really need to install regular breakpoints in the inferior. |
| However, we do have to insert software single-step |
| breakpoints, in case the target can't hardware step. To keep |
| things simple, we always insert. */ |
| |
| scoped_restore restore_operation_disable |
| = record_full_gdb_operation_disable_set (); |
| |
| int ret = this->beneath ()->insert_breakpoint (gdbarch, bp_tgt); |
| if (ret != 0) |
| return ret; |
| |
| in_target_beneath = true; |
| } |
| |
| /* Use the existing entries if found in order to avoid duplication |
| in record_full_breakpoints. */ |
| |
| for (const record_full_breakpoint &bp : record_full_breakpoints) |
| { |
| if (bp.addr == bp_tgt->placed_address |
| && bp.address_space == bp_tgt->placed_address_space) |
| { |
| gdb_assert (bp.in_target_beneath == in_target_beneath); |
| return 0; |
| } |
| } |
| |
| record_full_breakpoints.emplace_back (bp_tgt->placed_address_space, |
| bp_tgt->placed_address, |
| in_target_beneath); |
| return 0; |
| } |
| |
| /* "remove_breakpoint" method for process record target. */ |
| |
| int |
| record_full_target::remove_breakpoint (struct gdbarch *gdbarch, |
| struct bp_target_info *bp_tgt, |
| enum remove_bp_reason reason) |
| { |
| for (auto iter = record_full_breakpoints.begin (); |
| iter != record_full_breakpoints.end (); |
| ++iter) |
| { |
| struct record_full_breakpoint &bp = *iter; |
| |
| if (bp.addr == bp_tgt->placed_address |
| && bp.address_space == bp_tgt->placed_address_space) |
| { |
| if (bp.in_target_beneath) |
| { |
| scoped_restore restore_operation_disable |
| = record_full_gdb_operation_disable_set (); |
| |
| int ret = this->beneath ()->remove_breakpoint (gdbarch, bp_tgt, |
| reason); |
| if (ret != 0) |
| return ret; |
| } |
| |
| if (reason == REMOVE_BREAKPOINT) |
| unordered_remove (record_full_breakpoints, iter); |
| return 0; |
| } |
| } |
| |
| gdb_assert_not_reached ("removing unknown breakpoint"); |
| } |
| |
| /* "can_execute_reverse" method for process record target. */ |
| |
| bool |
| record_full_base_target::can_execute_reverse () |
| { |
| return true; |
| } |
| |
| /* "get_bookmark" method for process record and prec over core. */ |
| |
| gdb_byte * |
| record_full_base_target::get_bookmark (const char *args, int from_tty) |
| { |
| char *ret = NULL; |
| |
| /* Return stringified form of instruction count. */ |
| if (record_full_list && record_full_list->type == record_full_end) |
| ret = xstrdup (pulongest (record_full_list->u.end.insn_num)); |
| |
| if (record_debug) |
| { |
| if (ret) |
| fprintf_unfiltered (gdb_stdlog, |
| "record_full_get_bookmark returns %s\n", ret); |
| else |
| fprintf_unfiltered (gdb_stdlog, |
| "record_full_get_bookmark returns NULL\n"); |
| } |
| return (gdb_byte *) ret; |
| } |
| |
| /* "goto_bookmark" method for process record and prec over core. */ |
| |
| void |
| record_full_base_target::goto_bookmark (const gdb_byte *raw_bookmark, |
| int from_tty) |
| { |
| const char *bookmark = (const char *) raw_bookmark; |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| "record_full_goto_bookmark receives %s\n", bookmark); |
| |
| std::string name_holder; |
| if (bookmark[0] == '\'' || bookmark[0] == '\"') |
| { |
| if (bookmark[strlen (bookmark) - 1] != bookmark[0]) |
| error (_("Unbalanced quotes: %s"), bookmark); |
| |
| name_holder = std::string (bookmark + 1, strlen (bookmark) - 2); |
| bookmark = name_holder.c_str (); |
| } |
| |
| record_goto (bookmark); |
| } |
| |
| enum exec_direction_kind |
| record_full_base_target::execution_direction () |
| { |
| return record_full_execution_dir; |
| } |
| |
| /* The record_method method of target record-full. */ |
| |
| enum record_method |
| record_full_base_target::record_method (ptid_t ptid) |
| { |
| return RECORD_METHOD_FULL; |
| } |
| |
| void |
| record_full_base_target::info_record () |
| { |
| struct record_full_entry *p; |
| |
| if (RECORD_FULL_IS_REPLAY) |
| printf_filtered (_("Replay mode:\n")); |
| else |
| printf_filtered (_("Record mode:\n")); |
| |
| /* Find entry for first actual instruction in the log. */ |
| for (p = record_full_first.next; |
| p != NULL && p->type != record_full_end; |
| p = p->next) |
| ; |
| |
| /* Do we have a log at all? */ |
| if (p != NULL && p->type == record_full_end) |
| { |
| /* Display instruction number for first instruction in the log. */ |
| printf_filtered (_("Lowest recorded instruction number is %s.\n"), |
| pulongest (p->u.end.insn_num)); |
| |
| /* If in replay mode, display where we are in the log. */ |
| if (RECORD_FULL_IS_REPLAY) |
| printf_filtered (_("Current instruction number is %s.\n"), |
| pulongest (record_full_list->u.end.insn_num)); |
| |
| /* Display instruction number for last instruction in the log. */ |
| printf_filtered (_("Highest recorded instruction number is %s.\n"), |
| pulongest (record_full_insn_count)); |
| |
| /* Display log count. */ |
| printf_filtered (_("Log contains %u instructions.\n"), |
| record_full_insn_num); |
| } |
| else |
| printf_filtered (_("No instructions have been logged.\n")); |
| |
| /* Display max log size. */ |
| printf_filtered (_("Max logged instructions is %u.\n"), |
| record_full_insn_max_num); |
| } |
| |
| bool |
| record_full_base_target::supports_delete_record () |
| { |
| return true; |
| } |
| |
| /* The "delete_record" target method. */ |
| |
| void |
| record_full_base_target::delete_record () |
| { |
| record_full_list_release_following (record_full_list); |
| } |
| |
| /* The "record_is_replaying" target method. */ |
| |
| bool |
| record_full_base_target::record_is_replaying (ptid_t ptid) |
| { |
| return RECORD_FULL_IS_REPLAY; |
| } |
| |
| /* The "record_will_replay" target method. */ |
| |
| bool |
| record_full_base_target::record_will_replay (ptid_t ptid, int dir) |
| { |
| /* We can currently only record when executing forwards. Should we be able |
| to record when executing backwards on targets that support reverse |
| execution, this needs to be changed. */ |
| |
| return RECORD_FULL_IS_REPLAY || dir == EXEC_REVERSE; |
| } |
| |
| /* Go to a specific entry. */ |
| |
| static void |
| record_full_goto_entry (struct record_full_entry *p) |
| { |
| if (p == NULL) |
| error (_("Target insn not found.")); |
| else if (p == record_full_list) |
| error (_("Already at target insn.")); |
| else if (p->u.end.insn_num > record_full_list->u.end.insn_num) |
| { |
| printf_filtered (_("Go forward to insn number %s\n"), |
| pulongest (p->u.end.insn_num)); |
| record_full_goto_insn (p, EXEC_FORWARD); |
| } |
| else |
| { |
| printf_filtered (_("Go backward to insn number %s\n"), |
| pulongest (p->u.end.insn_num)); |
| record_full_goto_insn (p, EXEC_REVERSE); |
| } |
| |
| registers_changed (); |
| reinit_frame_cache (); |
| inferior_thread ()->suspend.stop_pc |
| = regcache_read_pc (get_current_regcache ()); |
| print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1); |
| } |
| |
| /* The "goto_record_begin" target method. */ |
| |
| void |
| record_full_base_target::goto_record_begin () |
| { |
| struct record_full_entry *p = NULL; |
| |
| for (p = &record_full_first; p != NULL; p = p->next) |
| if (p->type == record_full_end) |
| break; |
| |
| record_full_goto_entry (p); |
| } |
| |
| /* The "goto_record_end" target method. */ |
| |
| void |
| record_full_base_target::goto_record_end () |
| { |
| struct record_full_entry *p = NULL; |
| |
| for (p = record_full_list; p->next != NULL; p = p->next) |
| ; |
| for (; p!= NULL; p = p->prev) |
| if (p->type == record_full_end) |
| break; |
| |
| record_full_goto_entry (p); |
| } |
| |
| /* The "goto_record" target method. */ |
| |
| void |
| record_full_base_target::goto_record (ULONGEST target_insn) |
| { |
| struct record_full_entry *p = NULL; |
| |
| for (p = &record_full_first; p != NULL; p = p->next) |
| if (p->type == record_full_end && p->u.end.insn_num == target_insn) |
| break; |
| |
| record_full_goto_entry (p); |
| } |
| |
| /* The "record_stop_replaying" target method. */ |
| |
| void |
| record_full_base_target::record_stop_replaying () |
| { |
| goto_record_end (); |
| } |
| |
| /* "resume" method for prec over corefile. */ |
| |
| void |
| record_full_core_target::resume (ptid_t ptid, int step, |
| enum gdb_signal signal) |
| { |
| record_full_resume_step = step; |
| record_full_resumed = 1; |
| record_full_execution_dir = ::execution_direction; |
| |
| /* We are about to start executing the inferior (or simulate it), |
| let's register it with the event loop. */ |
| if (target_can_async_p ()) |
| target_async (1); |
| } |
| |
| /* "kill" method for prec over corefile. */ |
| |
| void |
| record_full_core_target::kill () |
| { |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n"); |
| |
| unpush_target (this); |
| } |
| |
| /* "fetch_registers" method for prec over corefile. */ |
| |
| void |
| record_full_core_target::fetch_registers (struct regcache *regcache, |
| int regno) |
| { |
| if (regno < 0) |
| { |
| int num = gdbarch_num_regs (regcache->arch ()); |
| int i; |
| |
| for (i = 0; i < num; i ++) |
| regcache->raw_supply (i, *record_full_core_regbuf); |
| } |
| else |
| regcache->raw_supply (regno, *record_full_core_regbuf); |
| } |
| |
| /* "prepare_to_store" method for prec over corefile. */ |
| |
| void |
| record_full_core_target::prepare_to_store (struct regcache *regcache) |
| { |
| } |
| |
| /* "store_registers" method for prec over corefile. */ |
| |
| void |
| record_full_core_target::store_registers (struct regcache *regcache, |
| int regno) |
| { |
| if (record_full_gdb_operation_disable) |
| record_full_core_regbuf->raw_supply (regno, *regcache); |
| else |
| error (_("You can't do that without a process to debug.")); |
| } |
| |
| /* "xfer_partial" method for prec over corefile. */ |
| |
| enum target_xfer_status |
| record_full_core_target::xfer_partial (enum target_object object, |
| const char *annex, gdb_byte *readbuf, |
| const gdb_byte *writebuf, ULONGEST offset, |
| ULONGEST len, ULONGEST *xfered_len) |
| { |
| if (object == TARGET_OBJECT_MEMORY) |
| { |
| if (record_full_gdb_operation_disable || !writebuf) |
| { |
| struct target_section *p; |
| |
| for (p = record_full_core_start; p < record_full_core_end; p++) |
| { |
| if (offset >= p->addr) |
| { |
| struct record_full_core_buf_entry *entry; |
| ULONGEST sec_offset; |
| |
| if (offset >= p->endaddr) |
| continue; |
| |
| if (offset + len > p->endaddr) |
| len = p->endaddr - offset; |
| |
| sec_offset = offset - p->addr; |
| |
| /* Read readbuf or write writebuf p, offset, len. */ |
| /* Check flags. */ |
| if (p->the_bfd_section->flags & SEC_CONSTRUCTOR |
| || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0) |
| { |
| if (readbuf) |
| memset (readbuf, 0, len); |
| |
| *xfered_len = len; |
| return TARGET_XFER_OK; |
| } |
| /* Get record_full_core_buf_entry. */ |
| for (entry = record_full_core_buf_list; entry; |
| entry = entry->prev) |
| if (entry->p == p) |
| break; |
| if (writebuf) |
| { |
| if (!entry) |
| { |
| /* Add a new entry. */ |
| entry = XNEW (struct record_full_core_buf_entry); |
| entry->p = p; |
| if (!bfd_malloc_and_get_section |
| (p->the_bfd_section->owner, |
| p->the_bfd_section, |
| &entry->buf)) |
| { |
| xfree (entry); |
| return TARGET_XFER_EOF; |
| } |
| entry->prev = record_full_core_buf_list; |
| record_full_core_buf_list = entry; |
| } |
| |
| memcpy (entry->buf + sec_offset, writebuf, |
| (size_t) len); |
| } |
| else |
| { |
| if (!entry) |
| return this->beneath ()->xfer_partial (object, annex, |
| readbuf, writebuf, |
| offset, len, |
| xfered_len); |
| |
| memcpy (readbuf, entry->buf + sec_offset, |
| (size_t) len); |
| } |
| |
| *xfered_len = len; |
| return TARGET_XFER_OK; |
| } |
| } |
| |
| return TARGET_XFER_E_IO; |
| } |
| else |
| error (_("You can't do that without a process to debug.")); |
| } |
| |
| return this->beneath ()->xfer_partial (object, annex, |
| readbuf, writebuf, offset, len, |
| xfered_len); |
| } |
| |
| /* "insert_breakpoint" method for prec over corefile. */ |
| |
| int |
| record_full_core_target::insert_breakpoint (struct gdbarch *gdbarch, |
| struct bp_target_info *bp_tgt) |
| { |
| return 0; |
| } |
| |
| /* "remove_breakpoint" method for prec over corefile. */ |
| |
| int |
| record_full_core_target::remove_breakpoint (struct gdbarch *gdbarch, |
| struct bp_target_info *bp_tgt, |
| enum remove_bp_reason reason) |
| { |
| return 0; |
| } |
| |
| /* "has_execution" method for prec over corefile. */ |
| |
| bool |
| record_full_core_target::has_execution (inferior *inf) |
| { |
| return true; |
| } |
| |
| /* Record log save-file format |
| Version 1 (never released) |
| |
| Header: |
| 4 bytes: magic number htonl(0x20090829). |
| NOTE: be sure to change whenever this file format changes! |
| |
| Records: |
| record_full_end: |
| 1 byte: record type (record_full_end, see enum record_full_type). |
| record_full_reg: |
| 1 byte: record type (record_full_reg, see enum record_full_type). |
| 8 bytes: register id (network byte order). |
| MAX_REGISTER_SIZE bytes: register value. |
| record_full_mem: |
| 1 byte: record type (record_full_mem, see enum record_full_type). |
| 8 bytes: memory length (network byte order). |
| 8 bytes: memory address (network byte order). |
| n bytes: memory value (n == memory length). |
| |
| Version 2 |
| 4 bytes: magic number netorder32(0x20091016). |
| NOTE: be sure to change whenever this file format changes! |
| |
| Records: |
| record_full_end: |
| 1 byte: record type (record_full_end, see enum record_full_type). |
| 4 bytes: signal |
| 4 bytes: instruction count |
| record_full_reg: |
| 1 byte: record type (record_full_reg, see enum record_full_type). |
| 4 bytes: register id (network byte order). |
| n bytes: register value (n == actual register size). |
| (eg. 4 bytes for x86 general registers). |
| record_full_mem: |
| 1 byte: record type (record_full_mem, see enum record_full_type). |
| 4 bytes: memory length (network byte order). |
| 8 bytes: memory address (network byte order). |
| n bytes: memory value (n == memory length). |
| |
| */ |
| |
| /* bfdcore_read -- read bytes from a core file section. */ |
| |
| static inline void |
| bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset) |
| { |
| int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len); |
| |
| if (ret) |
| *offset += len; |
| else |
| error (_("Failed to read %d bytes from core file %s ('%s')."), |
| len, bfd_get_filename (obfd), |
| bfd_errmsg (bfd_get_error ())); |
| } |
| |
| static inline uint64_t |
| netorder64 (uint64_t input) |
| { |
| uint64_t ret; |
| |
| store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret), |
| BFD_ENDIAN_BIG, input); |
| return ret; |
| } |
| |
| static inline uint32_t |
| netorder32 (uint32_t input) |
| { |
| uint32_t ret; |
| |
| store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret), |
| BFD_ENDIAN_BIG, input); |
| return ret; |
| } |
| |
| /* Restore the execution log from a core_bfd file. */ |
| static void |
| record_full_restore (void) |
| { |
| uint32_t magic; |
| struct record_full_entry *rec; |
| asection *osec; |
| uint32_t osec_size; |
| int bfd_offset = 0; |
| struct regcache *regcache; |
| |
| /* We restore the execution log from the open core bfd, |
| if there is one. */ |
| if (core_bfd == NULL) |
| return; |
| |
| /* "record_full_restore" can only be called when record list is empty. */ |
| gdb_assert (record_full_first.next == NULL); |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n"); |
| |
| /* Now need to find our special note section. */ |
| osec = bfd_get_section_by_name (core_bfd, "null0"); |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n", |
| osec ? "succeeded" : "failed"); |
| if (osec == NULL) |
| return; |
| osec_size = bfd_section_size (osec); |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (osec)); |
| |
| /* Check the magic code. */ |
| bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset); |
| if (magic != RECORD_FULL_FILE_MAGIC) |
| error (_("Version mis-match or file format error in core file %s."), |
| bfd_get_filename (core_bfd)); |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Reading 4-byte magic cookie " |
| "RECORD_FULL_FILE_MAGIC (0x%s)\n", |
| phex_nz (netorder32 (magic), 4)); |
| |
| /* Restore the entries in recfd into record_full_arch_list_head and |
| record_full_arch_list_tail. */ |
| record_full_arch_list_head = NULL; |
| record_full_arch_list_tail = NULL; |
| record_full_insn_num = 0; |
| |
| try |
| { |
| regcache = get_current_regcache (); |
| |
| while (1) |
| { |
| uint8_t rectype; |
| uint32_t regnum, len, signal, count; |
| uint64_t addr; |
| |
| /* We are finished when offset reaches osec_size. */ |
| if (bfd_offset >= osec_size) |
| break; |
| bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset); |
| |
| switch (rectype) |
| { |
| case record_full_reg: /* reg */ |
| /* Get register number to regnum. */ |
| bfdcore_read (core_bfd, osec, ®num, |
| sizeof (regnum), &bfd_offset); |
| regnum = netorder32 (regnum); |
| |
| rec = record_full_reg_alloc (regcache, regnum); |
| |
| /* Get val. */ |
| bfdcore_read (core_bfd, osec, record_full_get_loc (rec), |
| rec->u.reg.len, &bfd_offset); |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Reading register %d (1 " |
| "plus %lu plus %d bytes)\n", |
| rec->u.reg.num, |
| (unsigned long) sizeof (regnum), |
| rec->u.reg.len); |
| break; |
| |
| case record_full_mem: /* mem */ |
| /* Get len. */ |
| bfdcore_read (core_bfd, osec, &len, |
| sizeof (len), &bfd_offset); |
| len = netorder32 (len); |
| |
| /* Get addr. */ |
| bfdcore_read (core_bfd, osec, &addr, |
| sizeof (addr), &bfd_offset); |
| addr = netorder64 (addr); |
| |
| rec = record_full_mem_alloc (addr, len); |
| |
| /* Get val. */ |
| bfdcore_read (core_bfd, osec, record_full_get_loc (rec), |
| rec->u.mem.len, &bfd_offset); |
| |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Reading memory %s (1 plus " |
| "%lu plus %lu plus %d bytes)\n", |
| paddress (get_current_arch (), |
| rec->u.mem.addr), |
| (unsigned long) sizeof (addr), |
| (unsigned long) sizeof (len), |
| rec->u.mem.len); |
| break; |
| |
| case record_full_end: /* end */ |
| rec = record_full_end_alloc (); |
| record_full_insn_num ++; |
| |
| /* Get signal value. */ |
| bfdcore_read (core_bfd, osec, &signal, |
| sizeof (signal), &bfd_offset); |
| signal = netorder32 (signal); |
| rec->u.end.sigval = (enum gdb_signal) signal; |
| |
| /* Get insn count. */ |
| bfdcore_read (core_bfd, osec, &count, |
| sizeof (count), &bfd_offset); |
| count = netorder32 (count); |
| rec->u.end.insn_num = count; |
| record_full_insn_count = count + 1; |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Reading record_full_end (1 + " |
| "%lu + %lu bytes), offset == %s\n", |
| (unsigned long) sizeof (signal), |
| (unsigned long) sizeof (count), |
| paddress (get_current_arch (), |
| bfd_offset)); |
| break; |
| |
| default: |
| error (_("Bad entry type in core file %s."), |
| bfd_get_filename (core_bfd)); |
| break; |
| } |
| |
| /* Add rec to record arch list. */ |
| record_full_arch_list_add (rec); |
| } |
| } |
| catch (const gdb_exception &ex) |
| { |
| record_full_list_release (record_full_arch_list_tail); |
| throw; |
| } |
| |
| /* Add record_full_arch_list_head to the end of record list. */ |
| record_full_first.next = record_full_arch_list_head; |
| record_full_arch_list_head->prev = &record_full_first; |
| record_full_arch_list_tail->next = NULL; |
| record_full_list = &record_full_first; |
| |
| /* Update record_full_insn_max_num. */ |
| if (record_full_insn_num > record_full_insn_max_num) |
| { |
| record_full_insn_max_num = record_full_insn_num; |
| warning (_("Auto increase record/replay buffer limit to %u."), |
| record_full_insn_max_num); |
| } |
| |
| /* Succeeded. */ |
| printf_filtered (_("Restored records from core file %s.\n"), |
| bfd_get_filename (core_bfd)); |
| |
| print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1); |
| } |
| |
| /* bfdcore_write -- write bytes into a core file section. */ |
| |
| static inline void |
| bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset) |
| { |
| int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len); |
| |
| if (ret) |
| *offset += len; |
| else |
| error (_("Failed to write %d bytes to core file %s ('%s')."), |
| len, bfd_get_filename (obfd), |
| bfd_errmsg (bfd_get_error ())); |
| } |
| |
| /* Restore the execution log from a file. We use a modified elf |
| corefile format, with an extra section for our data. */ |
| |
| static void |
| cmd_record_full_restore (const char *args, int from_tty) |
| { |
| core_file_command (args, from_tty); |
| record_full_open (args, from_tty); |
| } |
| |
| /* Save the execution log to a file. We use a modified elf corefile |
| format, with an extra section for our data. */ |
| |
| void |
| record_full_base_target::save_record (const char *recfilename) |
| { |
| struct record_full_entry *cur_record_full_list; |
| uint32_t magic; |
| struct regcache *regcache; |
| struct gdbarch *gdbarch; |
| int save_size = 0; |
| asection *osec = NULL; |
| int bfd_offset = 0; |
| |
| /* Open the save file. */ |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n", |
| recfilename); |
| |
| /* Open the output file. */ |
| gdb_bfd_ref_ptr obfd (create_gcore_bfd (recfilename)); |
| |
| /* Arrange to remove the output file on failure. */ |
| gdb::unlinker unlink_file (recfilename); |
| |
| /* Save the current record entry to "cur_record_full_list". */ |
| cur_record_full_list = record_full_list; |
| |
| /* Get the values of regcache and gdbarch. */ |
| regcache = get_current_regcache (); |
| gdbarch = regcache->arch (); |
| |
| /* Disable the GDB operation record. */ |
| scoped_restore restore_operation_disable |
| = record_full_gdb_operation_disable_set (); |
| |
| /* Reverse execute to the begin of record list. */ |
| while (1) |
| { |
| /* Check for beginning and end of log. */ |
| if (record_full_list == &record_full_first) |
| break; |
| |
| record_full_exec_insn (regcache, gdbarch, record_full_list); |
| |
| if (record_full_list->prev) |
| record_full_list = record_full_list->prev; |
| } |
| |
| /* Compute the size needed for the extra bfd section. */ |
| save_size = 4; /* magic cookie */ |
| for (record_full_list = record_full_first.next; record_full_list; |
| record_full_list = record_full_list->next) |
| switch (record_full_list->type) |
| { |
| case record_full_end: |
| save_size += 1 + 4 + 4; |
| break; |
| case record_full_reg: |
| save_size += 1 + 4 + record_full_list->u.reg.len; |
| break; |
| case record_full_mem: |
| save_size += 1 + 4 + 8 + record_full_list->u.mem.len; |
| break; |
| } |
| |
| /* Make the new bfd section. */ |
| osec = bfd_make_section_anyway_with_flags (obfd.get (), "precord", |
| SEC_HAS_CONTENTS |
| | SEC_READONLY); |
| if (osec == NULL) |
| error (_("Failed to create 'precord' section for corefile %s: %s"), |
| recfilename, |
| bfd_errmsg (bfd_get_error ())); |
| bfd_set_section_size (osec, save_size); |
| bfd_set_section_vma (osec, 0); |
| bfd_set_section_alignment (osec, 0); |
| |
| /* Save corefile state. */ |
| write_gcore_file (obfd.get ()); |
| |
| /* Write out the record log. */ |
| /* Write the magic code. */ |
| magic = RECORD_FULL_FILE_MAGIC; |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Writing 4-byte magic cookie " |
| "RECORD_FULL_FILE_MAGIC (0x%s)\n", |
| phex_nz (magic, 4)); |
| bfdcore_write (obfd.get (), osec, &magic, sizeof (magic), &bfd_offset); |
| |
| /* Save the entries to recfd and forward execute to the end of |
| record list. */ |
| record_full_list = &record_full_first; |
| while (1) |
| { |
| /* Save entry. */ |
| if (record_full_list != &record_full_first) |
| { |
| uint8_t type; |
| uint32_t regnum, len, signal, count; |
| uint64_t addr; |
| |
| type = record_full_list->type; |
| bfdcore_write (obfd.get (), osec, &type, sizeof (type), &bfd_offset); |
| |
| switch (record_full_list->type) |
| { |
| case record_full_reg: /* reg */ |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Writing register %d (1 " |
| "plus %lu plus %d bytes)\n", |
| record_full_list->u.reg.num, |
| (unsigned long) sizeof (regnum), |
| record_full_list->u.reg.len); |
| |
| /* Write regnum. */ |
| regnum = netorder32 (record_full_list->u.reg.num); |
| bfdcore_write (obfd.get (), osec, ®num, |
| sizeof (regnum), &bfd_offset); |
| |
| /* Write regval. */ |
| bfdcore_write (obfd.get (), osec, |
| record_full_get_loc (record_full_list), |
| record_full_list->u.reg.len, &bfd_offset); |
| break; |
| |
| case record_full_mem: /* mem */ |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Writing memory %s (1 plus " |
| "%lu plus %lu plus %d bytes)\n", |
| paddress (gdbarch, |
| record_full_list->u.mem.addr), |
| (unsigned long) sizeof (addr), |
| (unsigned long) sizeof (len), |
| record_full_list->u.mem.len); |
| |
| /* Write memlen. */ |
| len = netorder32 (record_full_list->u.mem.len); |
| bfdcore_write (obfd.get (), osec, &len, sizeof (len), |
| &bfd_offset); |
| |
| /* Write memaddr. */ |
| addr = netorder64 (record_full_list->u.mem.addr); |
| bfdcore_write (obfd.get (), osec, &addr, |
| sizeof (addr), &bfd_offset); |
| |
| /* Write memval. */ |
| bfdcore_write (obfd.get (), osec, |
| record_full_get_loc (record_full_list), |
| record_full_list->u.mem.len, &bfd_offset); |
| break; |
| |
| case record_full_end: |
| if (record_debug) |
| fprintf_unfiltered (gdb_stdlog, |
| " Writing record_full_end (1 + " |
| "%lu + %lu bytes)\n", |
| (unsigned long) sizeof (signal), |
| (unsigned long) sizeof (count)); |
| /* Write signal value. */ |
| signal = netorder32 (record_full_list->u.end.sigval); |
| bfdcore_write (obfd.get (), osec, &signal, |
| sizeof (signal), &bfd_offset); |
| |
| /* Write insn count. */ |
| count = netorder32 (record_full_list->u.end.insn_num); |
| bfdcore_write (obfd.get (), osec, &count, |
| sizeof (count), &bfd_offset); |
| break; |
| } |
| } |
| |
| /* Execute entry. */ |
| record_full_exec_insn (regcache, gdbarch, record_full_list); |
| |
| if (record_full_list->next) |
| record_full_list = record_full_list->next; |
| else |
| break; |
| } |
| |
| /* Reverse execute to cur_record_full_list. */ |
| while (1) |
| { |
| /* Check for beginning and end of log. */ |
| if (record_full_list == cur_record_full_list) |
| break; |
| |
| record_full_exec_insn (regcache, gdbarch, record_full_list); |
| |
| if (record_full_list->prev) |
| record_full_list = record_full_list->prev; |
| } |
| |
| unlink_file.keep (); |
| |
| /* Succeeded. */ |
| printf_filtered (_("Saved core file %s with execution log.\n"), |
| recfilename); |
| } |
| |
| /* record_full_goto_insn -- rewind the record log (forward or backward, |
| depending on DIR) to the given entry, changing the program state |
| correspondingly. */ |
| |
| static void |
| record_full_goto_insn (struct record_full_entry *entry, |
| enum exec_direction_kind dir) |
| { |
| scoped_restore restore_operation_disable |
| = record_full_gdb_operation_disable_set (); |
| struct regcache *regcache = get_current_regcache (); |
| struct gdbarch *gdbarch = regcache->arch (); |
| |
| /* Assume everything is valid: we will hit the entry, |
| and we will not hit the end of the recording. */ |
| |
| if (dir == EXEC_FORWARD) |
| record_full_list = record_full_list->next; |
| |
| do |
| { |
| record_full_exec_insn (regcache, gdbarch, record_full_list); |
| if (dir == EXEC_REVERSE) |
| record_full_list = record_full_list->prev; |
| else |
| record_full_list = record_full_list->next; |
| } while (record_full_list != entry); |
| } |
| |
| /* Alias for "target record-full". */ |
| |
| static void |
| cmd_record_full_start (const char *args, int from_tty) |
| { |
| execute_command ("target record-full", from_tty); |
| } |
| |
| static void |
| set_record_full_insn_max_num (const char *args, int from_tty, |
| struct cmd_list_element *c) |
| { |
| if (record_full_insn_num > record_full_insn_max_num) |
| { |
| /* Count down record_full_insn_num while releasing records from list. */ |
| while (record_full_insn_num > record_full_insn_max_num) |
| { |
| record_full_list_release_first (); |
| record_full_insn_num--; |
| } |
| } |
| } |
| |
| /* The "set record full" command. */ |
| |
| static void |
| set_record_full_command (const char *args, int from_tty) |
| { |
| printf_unfiltered (_("\"set record full\" must be followed " |
| "by an appropriate subcommand.\n")); |
| help_list (set_record_full_cmdlist, "set record full ", all_commands, |
| gdb_stdout); |
| } |
| |
| /* The "show record full" command. */ |
| |
| static void |
| show_record_full_command (const char *args, int from_tty) |
| { |
| cmd_show_list (show_record_full_cmdlist, from_tty, ""); |
| } |
| |
| void _initialize_record_full (); |
| void |
| _initialize_record_full () |
| { |
| struct cmd_list_element *c; |
| |
| /* Init record_full_first. */ |
| record_full_first.prev = NULL; |
| record_full_first.next = NULL; |
| record_full_first.type = record_full_end; |
| |
| add_target (record_full_target_info, record_full_open); |
| add_deprecated_target_alias (record_full_target_info, "record"); |
| add_target (record_full_core_target_info, record_full_open); |
| |
| add_prefix_cmd ("full", class_obscure, cmd_record_full_start, |
| _("Start full execution recording."), &record_full_cmdlist, |
| "record full ", 0, &record_cmdlist); |
| |
| c = add_cmd ("restore", class_obscure, cmd_record_full_restore, |
| _("Restore the execution log from a file.\n\ |
| Argument is filename. File must be created with 'record save'."), |
| &record_full_cmdlist); |
| set_cmd_completer (c, filename_completer); |
| |
| /* Deprecate the old version without "full" prefix. */ |
| c = add_alias_cmd ("restore", "full restore", class_obscure, 1, |
| &record_cmdlist); |
| set_cmd_completer (c, filename_completer); |
| deprecate_cmd (c, "record full restore"); |
| |
| add_prefix_cmd ("full", class_support, set_record_full_command, |
| _("Set record options."), &set_record_full_cmdlist, |
| "set record full ", 0, &set_record_cmdlist); |
| |
| add_prefix_cmd ("full", class_support, show_record_full_command, |
| _("Show record options."), &show_record_full_cmdlist, |
| "show record full ", 0, &show_record_cmdlist); |
| |
| /* Record instructions number limit command. */ |
| add_setshow_boolean_cmd ("stop-at-limit", no_class, |
| &record_full_stop_at_limit, _("\ |
| Set whether record/replay stops when record/replay buffer becomes full."), _("\ |
| Show whether record/replay stops when record/replay buffer becomes full."), |
| _("Default is ON.\n\ |
| When ON, if the record/replay buffer becomes full, ask user what to do.\n\ |
| When OFF, if the record/replay buffer becomes full,\n\ |
| delete the oldest recorded instruction to make room for each new one."), |
| NULL, NULL, |
| &set_record_full_cmdlist, &show_record_full_cmdlist); |
| |
| c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1, |
| &set_record_cmdlist); |
| deprecate_cmd (c, "set record full stop-at-limit"); |
| |
| c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1, |
| &show_record_cmdlist); |
| deprecate_cmd (c, "show record full stop-at-limit"); |
| |
| add_setshow_uinteger_cmd ("insn-number-max", no_class, |
| &record_full_insn_max_num, |
| _("Set record/replay buffer limit."), |
| _("Show record/replay buffer limit."), _("\ |
| Set the maximum number of instructions to be stored in the\n\ |
| record/replay buffer. A value of either \"unlimited\" or zero means no\n\ |
| limit. Default is 200000."), |
| set_record_full_insn_max_num, |
| NULL, &set_record_full_cmdlist, |
| &show_record_full_cmdlist); |
| |
| c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1, |
| &set_record_cmdlist); |
| deprecate_cmd (c, "set record full insn-number-max"); |
| |
| c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1, |
| &show_record_cmdlist); |
| deprecate_cmd (c, "show record full insn-number-max"); |
| |
| add_setshow_boolean_cmd ("memory-query", no_class, |
| &record_full_memory_query, _("\ |
| Set whether query if PREC cannot record memory change of next instruction."), |
| _("\ |
| Show whether query if PREC cannot record memory change of next instruction."), |
| _("\ |
| Default is OFF.\n\ |
| When ON, query if PREC cannot record memory change of next instruction."), |
| NULL, NULL, |
| &set_record_full_cmdlist, |
| &show_record_full_cmdlist); |
| |
| c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1, |
| &set_record_cmdlist); |
| deprecate_cmd (c, "set record full memory-query"); |
| |
| c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1, |
| &show_record_cmdlist); |
| deprecate_cmd (c, "show record full memory-query"); |
| } |