| /* GDB routines for manipulating the minimal symbol tables. | 
 |    Copyright (C) 1992-2022 Free Software Foundation, Inc. | 
 |    Contributed by Cygnus Support, using pieces from other GDB modules. | 
 |  | 
 |    This file is part of GDB. | 
 |  | 
 |    This program is free software; you can redistribute it and/or modify | 
 |    it under the terms of the GNU General Public License as published by | 
 |    the Free Software Foundation; either version 3 of the License, or | 
 |    (at your option) any later version. | 
 |  | 
 |    This program is distributed in the hope that it will be useful, | 
 |    but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |    GNU General Public License for more details. | 
 |  | 
 |    You should have received a copy of the GNU General Public License | 
 |    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */ | 
 |  | 
 |  | 
 | /* This file contains support routines for creating, manipulating, and | 
 |    destroying minimal symbol tables. | 
 |  | 
 |    Minimal symbol tables are used to hold some very basic information about | 
 |    all defined global symbols (text, data, bss, abs, etc).  The only two | 
 |    required pieces of information are the symbol's name and the address | 
 |    associated with that symbol. | 
 |  | 
 |    In many cases, even if a file was compiled with no special options for | 
 |    debugging at all, as long as was not stripped it will contain sufficient | 
 |    information to build useful minimal symbol tables using this structure. | 
 |  | 
 |    Even when a file contains enough debugging information to build a full | 
 |    symbol table, these minimal symbols are still useful for quickly mapping | 
 |    between names and addresses, and vice versa.  They are also sometimes used | 
 |    to figure out what full symbol table entries need to be read in.  */ | 
 |  | 
 |  | 
 | #include "defs.h" | 
 | #include <ctype.h> | 
 | #include "symtab.h" | 
 | #include "bfd.h" | 
 | #include "filenames.h" | 
 | #include "symfile.h" | 
 | #include "objfiles.h" | 
 | #include "demangle.h" | 
 | #include "value.h" | 
 | #include "cp-abi.h" | 
 | #include "target.h" | 
 | #include "cp-support.h" | 
 | #include "language.h" | 
 | #include "cli/cli-utils.h" | 
 | #include "gdbsupport/symbol.h" | 
 | #include <algorithm> | 
 | #include "safe-ctype.h" | 
 | #include "gdbsupport/parallel-for.h" | 
 | #include "inferior.h" | 
 |  | 
 | #if CXX_STD_THREAD | 
 | #include <mutex> | 
 | #endif | 
 |  | 
 | /* Return true if MINSYM is a cold clone symbol. | 
 |    Recognize f.i. these symbols (mangled/demangled): | 
 |    - _ZL3foov.cold | 
 |      foo() [clone .cold] | 
 |    - _ZL9do_rpo_vnP8functionP8edge_defP11bitmap_headbb.cold.138 | 
 |      do_rpo_vn(function*, edge_def*, bitmap_head*, bool, bool)	\ | 
 |        [clone .cold.138].  */ | 
 |  | 
 | static bool | 
 | msymbol_is_cold_clone (minimal_symbol *minsym) | 
 | { | 
 |   const char *name = minsym->natural_name (); | 
 |   size_t name_len = strlen (name); | 
 |   if (name_len < 1) | 
 |     return false; | 
 |  | 
 |   const char *last = &name[name_len - 1]; | 
 |   if (*last != ']') | 
 |     return false; | 
 |  | 
 |   const char *suffix = " [clone .cold"; | 
 |   size_t suffix_len = strlen (suffix); | 
 |   const char *found = strstr (name, suffix); | 
 |   if (found == nullptr) | 
 |     return false; | 
 |  | 
 |   const char *start = &found[suffix_len]; | 
 |   if (*start == ']') | 
 |     return true; | 
 |  | 
 |   if (*start != '.') | 
 |     return false; | 
 |  | 
 |   const char *p; | 
 |   for (p = start + 1; p <= last; ++p) | 
 |     { | 
 |       if (*p >= '0' && *p <= '9') | 
 | 	continue; | 
 |       break; | 
 |     } | 
 |  | 
 |   if (p == last) | 
 |     return true; | 
 |  | 
 |   return false; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | bool | 
 | msymbol_is_function (struct objfile *objfile, minimal_symbol *minsym, | 
 | 		     CORE_ADDR *func_address_p) | 
 | { | 
 |   CORE_ADDR msym_addr = minsym->value_address (objfile); | 
 |  | 
 |   switch (minsym->type ()) | 
 |     { | 
 |     case mst_slot_got_plt: | 
 |     case mst_data: | 
 |     case mst_bss: | 
 |     case mst_abs: | 
 |     case mst_file_data: | 
 |     case mst_file_bss: | 
 |     case mst_data_gnu_ifunc: | 
 |       { | 
 | 	struct gdbarch *gdbarch = objfile->arch (); | 
 | 	CORE_ADDR pc = gdbarch_convert_from_func_ptr_addr | 
 | 	  (gdbarch, msym_addr, current_inferior ()->top_target ()); | 
 | 	if (pc != msym_addr) | 
 | 	  { | 
 | 	    if (func_address_p != NULL) | 
 | 	      *func_address_p = pc; | 
 | 	    return true; | 
 | 	  } | 
 | 	return false; | 
 |       } | 
 |     case mst_file_text: | 
 |       /* Ignore function symbol that is not a function entry.  */ | 
 |       if (msymbol_is_cold_clone (minsym)) | 
 | 	return false; | 
 |       /* fallthru */ | 
 |     default: | 
 |       if (func_address_p != NULL) | 
 | 	*func_address_p = msym_addr; | 
 |       return true; | 
 |     } | 
 | } | 
 |  | 
 | /* Accumulate the minimal symbols for each objfile in bunches of BUNCH_SIZE. | 
 |    At the end, copy them all into one newly allocated array.  */ | 
 |  | 
 | #define BUNCH_SIZE 127 | 
 |  | 
 | struct msym_bunch | 
 |   { | 
 |     struct msym_bunch *next; | 
 |     struct minimal_symbol contents[BUNCH_SIZE]; | 
 |   }; | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | unsigned int | 
 | msymbol_hash_iw (const char *string) | 
 | { | 
 |   unsigned int hash = 0; | 
 |  | 
 |   while (*string && *string != '(') | 
 |     { | 
 |       string = skip_spaces (string); | 
 |       if (*string && *string != '(') | 
 | 	{ | 
 | 	  hash = SYMBOL_HASH_NEXT (hash, *string); | 
 | 	  ++string; | 
 | 	} | 
 |     } | 
 |   return hash; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | unsigned int | 
 | msymbol_hash (const char *string) | 
 | { | 
 |   unsigned int hash = 0; | 
 |  | 
 |   for (; *string; ++string) | 
 |     hash = SYMBOL_HASH_NEXT (hash, *string); | 
 |   return hash; | 
 | } | 
 |  | 
 | /* Add the minimal symbol SYM to an objfile's minsym hash table, TABLE.  */ | 
 | static void | 
 | add_minsym_to_hash_table (struct minimal_symbol *sym, | 
 | 			  struct minimal_symbol **table, | 
 | 			  unsigned int hash_value) | 
 | { | 
 |   if (sym->hash_next == NULL) | 
 |     { | 
 |       unsigned int hash = hash_value % MINIMAL_SYMBOL_HASH_SIZE; | 
 |  | 
 |       sym->hash_next = table[hash]; | 
 |       table[hash] = sym; | 
 |     } | 
 | } | 
 |  | 
 | /* Add the minimal symbol SYM to an objfile's minsym demangled hash table, | 
 |    TABLE.  */ | 
 | static void | 
 | add_minsym_to_demangled_hash_table (struct minimal_symbol *sym, | 
 | 				    struct objfile *objfile, | 
 | 				    unsigned int hash_value) | 
 | { | 
 |   if (sym->demangled_hash_next == NULL) | 
 |     { | 
 |       objfile->per_bfd->demangled_hash_languages.set (sym->language ()); | 
 |  | 
 |       struct minimal_symbol **table | 
 | 	= objfile->per_bfd->msymbol_demangled_hash; | 
 |       unsigned int hash_index = hash_value % MINIMAL_SYMBOL_HASH_SIZE; | 
 |       sym->demangled_hash_next = table[hash_index]; | 
 |       table[hash_index] = sym; | 
 |     } | 
 | } | 
 |  | 
 | /* Worker object for lookup_minimal_symbol.  Stores temporary results | 
 |    while walking the symbol tables.  */ | 
 |  | 
 | struct found_minimal_symbols | 
 | { | 
 |   /* External symbols are best.  */ | 
 |   bound_minimal_symbol external_symbol; | 
 |  | 
 |   /* File-local symbols are next best.  */ | 
 |   bound_minimal_symbol file_symbol; | 
 |  | 
 |   /* Symbols for shared library trampolines are next best.  */ | 
 |   bound_minimal_symbol trampoline_symbol; | 
 |  | 
 |   /* Called when a symbol name matches.  Check if the minsym is a | 
 |      better type than what we had already found, and record it in one | 
 |      of the members fields if so.  Returns true if we collected the | 
 |      real symbol, in which case we can stop searching.  */ | 
 |   bool maybe_collect (const char *sfile, objfile *objf, | 
 | 		      minimal_symbol *msymbol); | 
 | }; | 
 |  | 
 | /* See declaration above.  */ | 
 |  | 
 | bool | 
 | found_minimal_symbols::maybe_collect (const char *sfile, | 
 | 				      struct objfile *objfile, | 
 | 				      minimal_symbol *msymbol) | 
 | { | 
 |   switch (msymbol->type ()) | 
 |     { | 
 |     case mst_file_text: | 
 |     case mst_file_data: | 
 |     case mst_file_bss: | 
 |       if (sfile == NULL | 
 | 	  || filename_cmp (msymbol->filename, sfile) == 0) | 
 | 	{ | 
 | 	  file_symbol.minsym = msymbol; | 
 | 	  file_symbol.objfile = objfile; | 
 | 	} | 
 |       break; | 
 |  | 
 |     case mst_solib_trampoline: | 
 |  | 
 |       /* If a trampoline symbol is found, we prefer to keep | 
 | 	 looking for the *real* symbol.  If the actual symbol | 
 | 	 is not found, then we'll use the trampoline | 
 | 	 entry.  */ | 
 |       if (trampoline_symbol.minsym == NULL) | 
 | 	{ | 
 | 	  trampoline_symbol.minsym = msymbol; | 
 | 	  trampoline_symbol.objfile = objfile; | 
 | 	} | 
 |       break; | 
 |  | 
 |     case mst_unknown: | 
 |     default: | 
 |       external_symbol.minsym = msymbol; | 
 |       external_symbol.objfile = objfile; | 
 |       /* We have the real symbol.  No use looking further.  */ | 
 |       return true; | 
 |     } | 
 |  | 
 |   /* Keep looking.  */ | 
 |   return false; | 
 | } | 
 |  | 
 | /* Walk the mangled name hash table, and pass each symbol whose name | 
 |    matches LOOKUP_NAME according to NAMECMP to FOUND.  */ | 
 |  | 
 | static void | 
 | lookup_minimal_symbol_mangled (const char *lookup_name, | 
 | 			       const char *sfile, | 
 | 			       struct objfile *objfile, | 
 | 			       struct minimal_symbol **table, | 
 | 			       unsigned int hash, | 
 | 			       int (*namecmp) (const char *, const char *), | 
 | 			       found_minimal_symbols &found) | 
 | { | 
 |   for (minimal_symbol *msymbol = table[hash]; | 
 |        msymbol != NULL; | 
 |        msymbol = msymbol->hash_next) | 
 |     { | 
 |       const char *symbol_name = msymbol->linkage_name (); | 
 |  | 
 |       if (namecmp (symbol_name, lookup_name) == 0 | 
 | 	  && found.maybe_collect (sfile, objfile, msymbol)) | 
 | 	return; | 
 |     } | 
 | } | 
 |  | 
 | /* Walk the demangled name hash table, and pass each symbol whose name | 
 |    matches LOOKUP_NAME according to MATCHER to FOUND.  */ | 
 |  | 
 | static void | 
 | lookup_minimal_symbol_demangled (const lookup_name_info &lookup_name, | 
 | 				 const char *sfile, | 
 | 				 struct objfile *objfile, | 
 | 				 struct minimal_symbol **table, | 
 | 				 unsigned int hash, | 
 | 				 symbol_name_matcher_ftype *matcher, | 
 | 				 found_minimal_symbols &found) | 
 | { | 
 |   for (minimal_symbol *msymbol = table[hash]; | 
 |        msymbol != NULL; | 
 |        msymbol = msymbol->demangled_hash_next) | 
 |     { | 
 |       const char *symbol_name = msymbol->search_name (); | 
 |  | 
 |       if (matcher (symbol_name, lookup_name, NULL) | 
 | 	  && found.maybe_collect (sfile, objfile, msymbol)) | 
 | 	return; | 
 |     } | 
 | } | 
 |  | 
 | /* Look through all the current minimal symbol tables and find the | 
 |    first minimal symbol that matches NAME.  If OBJF is non-NULL, limit | 
 |    the search to that objfile.  If SFILE is non-NULL, the only file-scope | 
 |    symbols considered will be from that source file (global symbols are | 
 |    still preferred).  Returns a pointer to the minimal symbol that | 
 |    matches, or NULL if no match is found. | 
 |  | 
 |    Note:  One instance where there may be duplicate minimal symbols with | 
 |    the same name is when the symbol tables for a shared library and the | 
 |    symbol tables for an executable contain global symbols with the same | 
 |    names (the dynamic linker deals with the duplication). | 
 |  | 
 |    It's also possible to have minimal symbols with different mangled | 
 |    names, but identical demangled names.  For example, the GNU C++ v3 | 
 |    ABI requires the generation of two (or perhaps three) copies of | 
 |    constructor functions --- "in-charge", "not-in-charge", and | 
 |    "allocate" copies; destructors may be duplicated as well. | 
 |    Obviously, there must be distinct mangled names for each of these, | 
 |    but the demangled names are all the same: S::S or S::~S.  */ | 
 |  | 
 | struct bound_minimal_symbol | 
 | lookup_minimal_symbol (const char *name, const char *sfile, | 
 | 		       struct objfile *objf) | 
 | { | 
 |   found_minimal_symbols found; | 
 |  | 
 |   unsigned int mangled_hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE; | 
 |  | 
 |   auto *mangled_cmp | 
 |     = (case_sensitivity == case_sensitive_on | 
 |        ? strcmp | 
 |        : strcasecmp); | 
 |  | 
 |   if (sfile != NULL) | 
 |     sfile = lbasename (sfile); | 
 |  | 
 |   lookup_name_info lookup_name (name, symbol_name_match_type::FULL); | 
 |  | 
 |   for (objfile *objfile : current_program_space->objfiles ()) | 
 |     { | 
 |       if (found.external_symbol.minsym != NULL) | 
 | 	break; | 
 |  | 
 |       if (objf == NULL || objf == objfile | 
 | 	  || objf == objfile->separate_debug_objfile_backlink) | 
 | 	{ | 
 | 	  symbol_lookup_debug_printf ("lookup_minimal_symbol (%s, %s, %s)", | 
 | 				      name, sfile != NULL ? sfile : "NULL", | 
 | 				      objfile_debug_name (objfile)); | 
 |  | 
 | 	  /* Do two passes: the first over the ordinary hash table, | 
 | 	     and the second over the demangled hash table.  */ | 
 | 	  lookup_minimal_symbol_mangled (name, sfile, objfile, | 
 | 					 objfile->per_bfd->msymbol_hash, | 
 | 					 mangled_hash, mangled_cmp, found); | 
 |  | 
 | 	  /* If not found, try the demangled hash table.  */ | 
 | 	  if (found.external_symbol.minsym == NULL) | 
 | 	    { | 
 | 	      /* Once for each language in the demangled hash names | 
 | 		 table (usually just zero or one languages).  */ | 
 | 	      for (unsigned iter = 0; iter < nr_languages; ++iter) | 
 | 		{ | 
 | 		  if (!objfile->per_bfd->demangled_hash_languages.test (iter)) | 
 | 		    continue; | 
 | 		  enum language lang = (enum language) iter; | 
 |  | 
 | 		  unsigned int hash | 
 | 		    = (lookup_name.search_name_hash (lang) | 
 | 		       % MINIMAL_SYMBOL_HASH_SIZE); | 
 |  | 
 | 		  symbol_name_matcher_ftype *match | 
 | 		    = language_def (lang)->get_symbol_name_matcher | 
 | 							(lookup_name); | 
 | 		  struct minimal_symbol **msymbol_demangled_hash | 
 | 		    = objfile->per_bfd->msymbol_demangled_hash; | 
 |  | 
 | 		  lookup_minimal_symbol_demangled (lookup_name, sfile, objfile, | 
 | 						   msymbol_demangled_hash, | 
 | 						   hash, match, found); | 
 |  | 
 | 		  if (found.external_symbol.minsym != NULL) | 
 | 		    break; | 
 | 		} | 
 | 	    } | 
 | 	} | 
 |     } | 
 |  | 
 |   /* External symbols are best.  */ | 
 |   if (found.external_symbol.minsym != NULL) | 
 |     { | 
 |       if (symbol_lookup_debug) | 
 | 	{ | 
 | 	  minimal_symbol *minsym = found.external_symbol.minsym; | 
 |  | 
 | 	  symbol_lookup_debug_printf | 
 | 	    ("lookup_minimal_symbol (...) = %s (external)", | 
 | 	     host_address_to_string (minsym)); | 
 | 	} | 
 |       return found.external_symbol; | 
 |     } | 
 |  | 
 |   /* File-local symbols are next best.  */ | 
 |   if (found.file_symbol.minsym != NULL) | 
 |     { | 
 |       if (symbol_lookup_debug) | 
 | 	{ | 
 | 	  minimal_symbol *minsym = found.file_symbol.minsym; | 
 |  | 
 | 	  symbol_lookup_debug_printf | 
 | 	    ("lookup_minimal_symbol (...) = %s (file-local)", | 
 | 	     host_address_to_string (minsym)); | 
 | 	} | 
 |       return found.file_symbol; | 
 |     } | 
 |  | 
 |   /* Symbols for shared library trampolines are next best.  */ | 
 |   if (found.trampoline_symbol.minsym != NULL) | 
 |     { | 
 |       if (symbol_lookup_debug) | 
 | 	{ | 
 | 	  minimal_symbol *minsym = found.trampoline_symbol.minsym; | 
 |  | 
 | 	  symbol_lookup_debug_printf | 
 | 	    ("lookup_minimal_symbol (...) = %s (trampoline)", | 
 | 	     host_address_to_string (minsym)); | 
 | 	} | 
 |  | 
 |       return found.trampoline_symbol; | 
 |     } | 
 |  | 
 |   /* Not found.  */ | 
 |   symbol_lookup_debug_printf ("lookup_minimal_symbol (...) = NULL"); | 
 |   return {}; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | struct bound_minimal_symbol | 
 | lookup_bound_minimal_symbol (const char *name) | 
 | { | 
 |   return lookup_minimal_symbol (name, NULL, NULL); | 
 | } | 
 |  | 
 | /* See gdbsupport/symbol.h.  */ | 
 |  | 
 | int | 
 | find_minimal_symbol_address (const char *name, CORE_ADDR *addr, | 
 | 			     struct objfile *objfile) | 
 | { | 
 |   struct bound_minimal_symbol sym | 
 |     = lookup_minimal_symbol (name, NULL, objfile); | 
 |  | 
 |   if (sym.minsym != NULL) | 
 |     *addr = sym.value_address (); | 
 |  | 
 |   return sym.minsym == NULL; | 
 | } | 
 |  | 
 | /* Get the lookup name form best suitable for linkage name | 
 |    matching.  */ | 
 |  | 
 | static const char * | 
 | linkage_name_str (const lookup_name_info &lookup_name) | 
 | { | 
 |   /* Unlike most languages (including C++), Ada uses the | 
 |      encoded/linkage name as the search name recorded in symbols.  So | 
 |      if debugging in Ada mode, prefer the Ada-encoded name.  This also | 
 |      makes Ada's verbatim match syntax ("<...>") work, because | 
 |      "lookup_name.name()" includes the "<>"s, while | 
 |      "lookup_name.ada().lookup_name()" is the encoded name with "<>"s | 
 |      stripped.  */ | 
 |   if (current_language->la_language == language_ada) | 
 |     return lookup_name.ada ().lookup_name ().c_str (); | 
 |  | 
 |   return lookup_name.c_str (); | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | void | 
 | iterate_over_minimal_symbols | 
 |     (struct objfile *objf, const lookup_name_info &lookup_name, | 
 |      gdb::function_view<bool (struct minimal_symbol *)> callback) | 
 | { | 
 |   /* The first pass is over the ordinary hash table.  */ | 
 |     { | 
 |       const char *name = linkage_name_str (lookup_name); | 
 |       unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE; | 
 |       auto *mangled_cmp | 
 | 	= (case_sensitivity == case_sensitive_on | 
 | 	   ? strcmp | 
 | 	   : strcasecmp); | 
 |  | 
 |       for (minimal_symbol *iter = objf->per_bfd->msymbol_hash[hash]; | 
 | 	   iter != NULL; | 
 | 	   iter = iter->hash_next) | 
 | 	{ | 
 | 	  if (mangled_cmp (iter->linkage_name (), name) == 0) | 
 | 	    if (callback (iter)) | 
 | 	      return; | 
 | 	} | 
 |     } | 
 |  | 
 |   /* The second pass is over the demangled table.  Once for each | 
 |      language in the demangled hash names table (usually just zero or | 
 |      one).  */ | 
 |   for (unsigned liter = 0; liter < nr_languages; ++liter) | 
 |     { | 
 |       if (!objf->per_bfd->demangled_hash_languages.test (liter)) | 
 | 	continue; | 
 |  | 
 |       enum language lang = (enum language) liter; | 
 |       const language_defn *lang_def = language_def (lang); | 
 |       symbol_name_matcher_ftype *name_match | 
 | 	= lang_def->get_symbol_name_matcher (lookup_name); | 
 |  | 
 |       unsigned int hash | 
 | 	= lookup_name.search_name_hash (lang) % MINIMAL_SYMBOL_HASH_SIZE; | 
 |       for (minimal_symbol *iter = objf->per_bfd->msymbol_demangled_hash[hash]; | 
 | 	   iter != NULL; | 
 | 	   iter = iter->demangled_hash_next) | 
 | 	if (name_match (iter->search_name (), lookup_name, NULL)) | 
 | 	  if (callback (iter)) | 
 | 	    return; | 
 |     } | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | bound_minimal_symbol | 
 | lookup_minimal_symbol_linkage (const char *name, struct objfile *objf) | 
 | { | 
 |   unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE; | 
 |  | 
 |   for (objfile *objfile : objf->separate_debug_objfiles ()) | 
 |     { | 
 |       for (minimal_symbol *msymbol = objfile->per_bfd->msymbol_hash[hash]; | 
 | 	   msymbol != NULL; | 
 | 	   msymbol = msymbol->hash_next) | 
 | 	{ | 
 | 	  if (strcmp (msymbol->linkage_name (), name) == 0 | 
 | 	      && (msymbol->type () == mst_data | 
 | 		  || msymbol->type () == mst_bss)) | 
 | 	    return {msymbol, objfile}; | 
 | 	} | 
 |     } | 
 |  | 
 |   return {}; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | struct bound_minimal_symbol | 
 | lookup_minimal_symbol_text (const char *name, struct objfile *objf) | 
 | { | 
 |   struct minimal_symbol *msymbol; | 
 |   struct bound_minimal_symbol found_symbol; | 
 |   struct bound_minimal_symbol found_file_symbol; | 
 |  | 
 |   unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE; | 
 |  | 
 |   for (objfile *objfile : current_program_space->objfiles ()) | 
 |     { | 
 |       if (found_symbol.minsym != NULL) | 
 | 	break; | 
 |  | 
 |       if (objf == NULL || objf == objfile | 
 | 	  || objf == objfile->separate_debug_objfile_backlink) | 
 | 	{ | 
 | 	  for (msymbol = objfile->per_bfd->msymbol_hash[hash]; | 
 | 	       msymbol != NULL && found_symbol.minsym == NULL; | 
 | 	       msymbol = msymbol->hash_next) | 
 | 	    { | 
 | 	      if (strcmp (msymbol->linkage_name (), name) == 0 && | 
 | 		  (msymbol->type () == mst_text | 
 | 		   || msymbol->type () == mst_text_gnu_ifunc | 
 | 		   || msymbol->type () == mst_file_text)) | 
 | 		{ | 
 | 		  switch (msymbol->type ()) | 
 | 		    { | 
 | 		    case mst_file_text: | 
 | 		      found_file_symbol.minsym = msymbol; | 
 | 		      found_file_symbol.objfile = objfile; | 
 | 		      break; | 
 | 		    default: | 
 | 		      found_symbol.minsym = msymbol; | 
 | 		      found_symbol.objfile = objfile; | 
 | 		      break; | 
 | 		    } | 
 | 		} | 
 | 	    } | 
 | 	} | 
 |     } | 
 |   /* External symbols are best.  */ | 
 |   if (found_symbol.minsym) | 
 |     return found_symbol; | 
 |  | 
 |   /* File-local symbols are next best.  */ | 
 |   return found_file_symbol; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | struct minimal_symbol * | 
 | lookup_minimal_symbol_by_pc_name (CORE_ADDR pc, const char *name, | 
 | 				  struct objfile *objf) | 
 | { | 
 |   struct minimal_symbol *msymbol; | 
 |  | 
 |   unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE; | 
 |  | 
 |   for (objfile *objfile : current_program_space->objfiles ()) | 
 |     { | 
 |       if (objf == NULL || objf == objfile | 
 | 	  || objf == objfile->separate_debug_objfile_backlink) | 
 | 	{ | 
 | 	  for (msymbol = objfile->per_bfd->msymbol_hash[hash]; | 
 | 	       msymbol != NULL; | 
 | 	       msymbol = msymbol->hash_next) | 
 | 	    { | 
 | 	      if (msymbol->value_address (objfile) == pc | 
 | 		  && strcmp (msymbol->linkage_name (), name) == 0) | 
 | 		return msymbol; | 
 | 	    } | 
 | 	} | 
 |     } | 
 |  | 
 |   return NULL; | 
 | } | 
 |  | 
 | /* A helper function that makes *PC section-relative.  This searches | 
 |    the sections of OBJFILE and if *PC is in a section, it subtracts | 
 |    the section offset and returns true.  Otherwise it returns | 
 |    false.  */ | 
 |  | 
 | static int | 
 | frob_address (struct objfile *objfile, CORE_ADDR *pc) | 
 | { | 
 |   struct obj_section *iter; | 
 |  | 
 |   ALL_OBJFILE_OSECTIONS (objfile, iter) | 
 |     { | 
 |       if (*pc >= iter->addr () && *pc < iter->endaddr ()) | 
 | 	{ | 
 | 	  *pc -= iter->offset (); | 
 | 	  return 1; | 
 | 	} | 
 |     } | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | /* Helper for lookup_minimal_symbol_by_pc_section.  Convert a | 
 |    lookup_msym_prefer to a minimal_symbol_type.  */ | 
 |  | 
 | static minimal_symbol_type | 
 | msym_prefer_to_msym_type (lookup_msym_prefer prefer) | 
 | { | 
 |   switch (prefer) | 
 |     { | 
 |     case lookup_msym_prefer::TEXT: | 
 |       return mst_text; | 
 |     case lookup_msym_prefer::TRAMPOLINE: | 
 |       return mst_solib_trampoline; | 
 |     case lookup_msym_prefer::GNU_IFUNC: | 
 |       return mst_text_gnu_ifunc; | 
 |     } | 
 |  | 
 |   /* Assert here instead of in a default switch case above so that | 
 |      -Wswitch warns if a new enumerator is added.  */ | 
 |   gdb_assert_not_reached ("unhandled lookup_msym_prefer"); | 
 | } | 
 |  | 
 | /* See minsyms.h. | 
 |  | 
 |    Note that we need to look through ALL the minimal symbol tables | 
 |    before deciding on the symbol that comes closest to the specified PC. | 
 |    This is because objfiles can overlap, for example objfile A has .text | 
 |    at 0x100 and .data at 0x40000 and objfile B has .text at 0x234 and | 
 |    .data at 0x40048.  */ | 
 |  | 
 | bound_minimal_symbol | 
 | lookup_minimal_symbol_by_pc_section (CORE_ADDR pc_in, struct obj_section *section, | 
 | 				     lookup_msym_prefer prefer, | 
 | 				     bound_minimal_symbol *previous) | 
 | { | 
 |   int lo; | 
 |   int hi; | 
 |   int newobj; | 
 |   struct minimal_symbol *msymbol; | 
 |   struct minimal_symbol *best_symbol = NULL; | 
 |   struct objfile *best_objfile = NULL; | 
 |   struct bound_minimal_symbol result; | 
 |  | 
 |   if (previous != nullptr) | 
 |     { | 
 |       previous->minsym = nullptr; | 
 |       previous->objfile = nullptr; | 
 |     } | 
 |  | 
 |   if (section == NULL) | 
 |     { | 
 |       section = find_pc_section (pc_in); | 
 |       if (section == NULL) | 
 | 	return {}; | 
 |     } | 
 |  | 
 |   minimal_symbol_type want_type = msym_prefer_to_msym_type (prefer); | 
 |  | 
 |   /* We can not require the symbol found to be in section, because | 
 |      e.g. IRIX 6.5 mdebug relies on this code returning an absolute | 
 |      symbol - but find_pc_section won't return an absolute section and | 
 |      hence the code below would skip over absolute symbols.  We can | 
 |      still take advantage of the call to find_pc_section, though - the | 
 |      object file still must match.  In case we have separate debug | 
 |      files, search both the file and its separate debug file.  There's | 
 |      no telling which one will have the minimal symbols.  */ | 
 |  | 
 |   gdb_assert (section != NULL); | 
 |  | 
 |   for (objfile *objfile : section->objfile->separate_debug_objfiles ()) | 
 |     { | 
 |       CORE_ADDR pc = pc_in; | 
 |  | 
 |       /* If this objfile has a minimal symbol table, go search it | 
 | 	 using a binary search.  */ | 
 |  | 
 |       if (objfile->per_bfd->minimal_symbol_count > 0) | 
 | 	{ | 
 | 	  int best_zero_sized = -1; | 
 |  | 
 | 	  msymbol = objfile->per_bfd->msymbols.get (); | 
 | 	  lo = 0; | 
 | 	  hi = objfile->per_bfd->minimal_symbol_count - 1; | 
 |  | 
 | 	  /* This code assumes that the minimal symbols are sorted by | 
 | 	     ascending address values.  If the pc value is greater than or | 
 | 	     equal to the first symbol's address, then some symbol in this | 
 | 	     minimal symbol table is a suitable candidate for being the | 
 | 	     "best" symbol.  This includes the last real symbol, for cases | 
 | 	     where the pc value is larger than any address in this vector. | 
 |  | 
 | 	     By iterating until the address associated with the current | 
 | 	     hi index (the endpoint of the test interval) is less than | 
 | 	     or equal to the desired pc value, we accomplish two things: | 
 | 	     (1) the case where the pc value is larger than any minimal | 
 | 	     symbol address is trivially solved, (2) the address associated | 
 | 	     with the hi index is always the one we want when the iteration | 
 | 	     terminates.  In essence, we are iterating the test interval | 
 | 	     down until the pc value is pushed out of it from the high end. | 
 |  | 
 | 	     Warning: this code is trickier than it would appear at first.  */ | 
 |  | 
 | 	  if (frob_address (objfile, &pc) | 
 | 	      && pc >= msymbol[lo].value_raw_address ()) | 
 | 	    { | 
 | 	      while (msymbol[hi].value_raw_address () > pc) | 
 | 		{ | 
 | 		  /* pc is still strictly less than highest address.  */ | 
 | 		  /* Note "new" will always be >= lo.  */ | 
 | 		  newobj = (lo + hi) / 2; | 
 | 		  if ((msymbol[newobj].value_raw_address () >= pc) | 
 | 		      || (lo == newobj)) | 
 | 		    { | 
 | 		      hi = newobj; | 
 | 		    } | 
 | 		  else | 
 | 		    { | 
 | 		      lo = newobj; | 
 | 		    } | 
 | 		} | 
 |  | 
 | 	      /* If we have multiple symbols at the same address, we want | 
 | 		 hi to point to the last one.  That way we can find the | 
 | 		 right symbol if it has an index greater than hi.  */ | 
 | 	      while (hi < objfile->per_bfd->minimal_symbol_count - 1 | 
 | 		     && (msymbol[hi].value_raw_address () | 
 | 			 == msymbol[hi + 1].value_raw_address ())) | 
 | 		hi++; | 
 |  | 
 | 	      /* Skip various undesirable symbols.  */ | 
 | 	      while (hi >= 0) | 
 | 		{ | 
 | 		  /* Skip any absolute symbols.  This is apparently | 
 | 		     what adb and dbx do, and is needed for the CM-5. | 
 | 		     There are two known possible problems: (1) on | 
 | 		     ELF, apparently end, edata, etc. are absolute. | 
 | 		     Not sure ignoring them here is a big deal, but if | 
 | 		     we want to use them, the fix would go in | 
 | 		     elfread.c.  (2) I think shared library entry | 
 | 		     points on the NeXT are absolute.  If we want | 
 | 		     special handling for this it probably should be | 
 | 		     triggered by a special mst_abs_or_lib or some | 
 | 		     such.  */ | 
 |  | 
 | 		  if (msymbol[hi].type () == mst_abs) | 
 | 		    { | 
 | 		      hi--; | 
 | 		      continue; | 
 | 		    } | 
 |  | 
 | 		  /* If SECTION was specified, skip any symbol from | 
 | 		     wrong section.  */ | 
 | 		  if (section | 
 | 		      /* Some types of debug info, such as COFF, | 
 | 			 don't fill the bfd_section member, so don't | 
 | 			 throw away symbols on those platforms.  */ | 
 | 		      && msymbol[hi].obj_section (objfile) != nullptr | 
 | 		      && (!matching_obj_sections | 
 | 			  (msymbol[hi].obj_section (objfile), | 
 | 			   section))) | 
 | 		    { | 
 | 		      hi--; | 
 | 		      continue; | 
 | 		    } | 
 |  | 
 | 		  /* If we are looking for a trampoline and this is a | 
 | 		     text symbol, or the other way around, check the | 
 | 		     preceding symbol too.  If they are otherwise | 
 | 		     identical prefer that one.  */ | 
 | 		  if (hi > 0 | 
 | 		      && msymbol[hi].type () != want_type | 
 | 		      && msymbol[hi - 1].type () == want_type | 
 | 		      && (msymbol[hi].size () == msymbol[hi - 1].size ()) | 
 | 		      && (msymbol[hi].value_raw_address () | 
 | 			  == msymbol[hi - 1].value_raw_address ()) | 
 | 		      && (msymbol[hi].obj_section (objfile) | 
 | 			  == msymbol[hi - 1].obj_section (objfile))) | 
 | 		    { | 
 | 		      hi--; | 
 | 		      continue; | 
 | 		    } | 
 |  | 
 | 		  /* If the minimal symbol has a zero size, save it | 
 | 		     but keep scanning backwards looking for one with | 
 | 		     a non-zero size.  A zero size may mean that the | 
 | 		     symbol isn't an object or function (e.g. a | 
 | 		     label), or it may just mean that the size was not | 
 | 		     specified.  */ | 
 | 		  if (msymbol[hi].size () == 0) | 
 | 		    { | 
 | 		      if (best_zero_sized == -1) | 
 | 			best_zero_sized = hi; | 
 | 		      hi--; | 
 | 		      continue; | 
 | 		    } | 
 |  | 
 | 		  /* If we are past the end of the current symbol, try | 
 | 		     the previous symbol if it has a larger overlapping | 
 | 		     size.  This happens on i686-pc-linux-gnu with glibc; | 
 | 		     the nocancel variants of system calls are inside | 
 | 		     the cancellable variants, but both have sizes.  */ | 
 | 		  if (hi > 0 | 
 | 		      && msymbol[hi].size () != 0 | 
 | 		      && pc >= (msymbol[hi].value_raw_address () | 
 | 				+ msymbol[hi].size ()) | 
 | 		      && pc < (msymbol[hi - 1].value_raw_address () | 
 | 			       + msymbol[hi - 1].size ())) | 
 | 		    { | 
 | 		      hi--; | 
 | 		      continue; | 
 | 		    } | 
 |  | 
 | 		  /* Otherwise, this symbol must be as good as we're going | 
 | 		     to get.  */ | 
 | 		  break; | 
 | 		} | 
 |  | 
 | 	      /* If HI has a zero size, and best_zero_sized is set, | 
 | 		 then we had two or more zero-sized symbols; prefer | 
 | 		 the first one we found (which may have a higher | 
 | 		 address).  Also, if we ran off the end, be sure | 
 | 		 to back up.  */ | 
 | 	      if (best_zero_sized != -1 | 
 | 		  && (hi < 0 || msymbol[hi].size () == 0)) | 
 | 		hi = best_zero_sized; | 
 |  | 
 | 	      /* If the minimal symbol has a non-zero size, and this | 
 | 		 PC appears to be outside the symbol's contents, then | 
 | 		 refuse to use this symbol.  If we found a zero-sized | 
 | 		 symbol with an address greater than this symbol's, | 
 | 		 use that instead.  We assume that if symbols have | 
 | 		 specified sizes, they do not overlap.  */ | 
 |  | 
 | 	      if (hi >= 0 | 
 | 		  && msymbol[hi].size () != 0 | 
 | 		  && pc >= (msymbol[hi].value_raw_address () | 
 | 			    + msymbol[hi].size ())) | 
 | 		{ | 
 | 		  if (best_zero_sized != -1) | 
 | 		    hi = best_zero_sized; | 
 | 		  else | 
 | 		    { | 
 | 		      /* If needed record this symbol as the closest | 
 | 			 previous symbol.  */ | 
 | 		      if (previous != nullptr) | 
 | 			{ | 
 | 			  if (previous->minsym == nullptr | 
 | 			      || (msymbol[hi].value_raw_address () | 
 | 				  > previous->minsym->value_raw_address ())) | 
 | 			    { | 
 | 			      previous->minsym = &msymbol[hi]; | 
 | 			      previous->objfile = objfile; | 
 | 			    } | 
 | 			} | 
 | 		      /* Go on to the next object file.  */ | 
 | 		      continue; | 
 | 		    } | 
 | 		} | 
 |  | 
 | 	      /* The minimal symbol indexed by hi now is the best one in this | 
 | 		 objfile's minimal symbol table.  See if it is the best one | 
 | 		 overall.  */ | 
 |  | 
 | 	      if (hi >= 0 | 
 | 		  && ((best_symbol == NULL) || | 
 | 		      (best_symbol->value_raw_address () < | 
 | 		       msymbol[hi].value_raw_address ()))) | 
 | 		{ | 
 | 		  best_symbol = &msymbol[hi]; | 
 | 		  best_objfile = objfile; | 
 | 		} | 
 | 	    } | 
 | 	} | 
 |     } | 
 |  | 
 |   result.minsym = best_symbol; | 
 |   result.objfile = best_objfile; | 
 |   return result; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | struct bound_minimal_symbol | 
 | lookup_minimal_symbol_by_pc (CORE_ADDR pc) | 
 | { | 
 |   return lookup_minimal_symbol_by_pc_section (pc, NULL); | 
 | } | 
 |  | 
 | /* Return non-zero iff PC is in an STT_GNU_IFUNC function resolver.  */ | 
 |  | 
 | bool | 
 | in_gnu_ifunc_stub (CORE_ADDR pc) | 
 | { | 
 |   bound_minimal_symbol msymbol | 
 |     = lookup_minimal_symbol_by_pc_section (pc, NULL, | 
 | 					   lookup_msym_prefer::GNU_IFUNC); | 
 |   return msymbol.minsym && msymbol.minsym->type () == mst_text_gnu_ifunc; | 
 | } | 
 |  | 
 | /* See elf_gnu_ifunc_resolve_addr for its real implementation.  */ | 
 |  | 
 | static CORE_ADDR | 
 | stub_gnu_ifunc_resolve_addr (struct gdbarch *gdbarch, CORE_ADDR pc) | 
 | { | 
 |   error (_("GDB cannot resolve STT_GNU_IFUNC symbol at address %s without " | 
 | 	   "the ELF support compiled in."), | 
 | 	 paddress (gdbarch, pc)); | 
 | } | 
 |  | 
 | /* See elf_gnu_ifunc_resolve_name for its real implementation.  */ | 
 |  | 
 | static bool | 
 | stub_gnu_ifunc_resolve_name (const char *function_name, | 
 | 			     CORE_ADDR *function_address_p) | 
 | { | 
 |   error (_("GDB cannot resolve STT_GNU_IFUNC symbol \"%s\" without " | 
 | 	   "the ELF support compiled in."), | 
 | 	 function_name); | 
 | } | 
 |  | 
 | /* See elf_gnu_ifunc_resolver_stop for its real implementation.  */ | 
 |  | 
 | static void | 
 | stub_gnu_ifunc_resolver_stop (code_breakpoint *b) | 
 | { | 
 |   internal_error (_("elf_gnu_ifunc_resolver_stop cannot be reached.")); | 
 | } | 
 |  | 
 | /* See elf_gnu_ifunc_resolver_return_stop for its real implementation.  */ | 
 |  | 
 | static void | 
 | stub_gnu_ifunc_resolver_return_stop (code_breakpoint *b) | 
 | { | 
 |   internal_error (_("elf_gnu_ifunc_resolver_return_stop cannot be reached.")); | 
 | } | 
 |  | 
 | /* See elf_gnu_ifunc_fns for its real implementation.  */ | 
 |  | 
 | static const struct gnu_ifunc_fns stub_gnu_ifunc_fns = | 
 | { | 
 |   stub_gnu_ifunc_resolve_addr, | 
 |   stub_gnu_ifunc_resolve_name, | 
 |   stub_gnu_ifunc_resolver_stop, | 
 |   stub_gnu_ifunc_resolver_return_stop, | 
 | }; | 
 |  | 
 | /* A placeholder for &elf_gnu_ifunc_fns.  */ | 
 |  | 
 | const struct gnu_ifunc_fns *gnu_ifunc_fns_p = &stub_gnu_ifunc_fns; | 
 |  | 
 |  | 
 |  | 
 | /* Return leading symbol character for a BFD.  If BFD is NULL, | 
 |    return the leading symbol character from the main objfile.  */ | 
 |  | 
 | static int | 
 | get_symbol_leading_char (bfd *abfd) | 
 | { | 
 |   if (abfd != NULL) | 
 |     return bfd_get_symbol_leading_char (abfd); | 
 |   if (current_program_space->symfile_object_file != NULL) | 
 |     { | 
 |       objfile *objf = current_program_space->symfile_object_file; | 
 |       if (objf->obfd != NULL) | 
 | 	return bfd_get_symbol_leading_char (objf->obfd.get ()); | 
 |     } | 
 |   return 0; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | minimal_symbol_reader::minimal_symbol_reader (struct objfile *obj) | 
 | : m_objfile (obj), | 
 |   m_msym_bunch (NULL), | 
 |   /* Note that presetting m_msym_bunch_index to BUNCH_SIZE causes the | 
 |      first call to save a minimal symbol to allocate the memory for | 
 |      the first bunch.  */ | 
 |   m_msym_bunch_index (BUNCH_SIZE), | 
 |   m_msym_count (0) | 
 | { | 
 | } | 
 |  | 
 | /* Discard the currently collected minimal symbols, if any.  If we wish | 
 |    to save them for later use, we must have already copied them somewhere | 
 |    else before calling this function.  */ | 
 |  | 
 | minimal_symbol_reader::~minimal_symbol_reader () | 
 | { | 
 |   struct msym_bunch *next; | 
 |  | 
 |   while (m_msym_bunch != NULL) | 
 |     { | 
 |       next = m_msym_bunch->next; | 
 |       xfree (m_msym_bunch); | 
 |       m_msym_bunch = next; | 
 |     } | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | void | 
 | minimal_symbol_reader::record (const char *name, CORE_ADDR address, | 
 | 			       enum minimal_symbol_type ms_type) | 
 | { | 
 |   int section; | 
 |  | 
 |   switch (ms_type) | 
 |     { | 
 |     case mst_text: | 
 |     case mst_text_gnu_ifunc: | 
 |     case mst_file_text: | 
 |     case mst_solib_trampoline: | 
 |       section = SECT_OFF_TEXT (m_objfile); | 
 |       break; | 
 |     case mst_data: | 
 |     case mst_data_gnu_ifunc: | 
 |     case mst_file_data: | 
 |       section = SECT_OFF_DATA (m_objfile); | 
 |       break; | 
 |     case mst_bss: | 
 |     case mst_file_bss: | 
 |       section = SECT_OFF_BSS (m_objfile); | 
 |       break; | 
 |     default: | 
 |       section = -1; | 
 |     } | 
 |  | 
 |   record_with_info (name, address, ms_type, section); | 
 | } | 
 |  | 
 | /* Convert an enumerator of type minimal_symbol_type to its string | 
 |    representation.  */ | 
 |  | 
 | static const char * | 
 | mst_str (minimal_symbol_type t) | 
 | { | 
 | #define MST_TO_STR(x) case x: return #x; | 
 |   switch (t) | 
 |   { | 
 |     MST_TO_STR (mst_unknown); | 
 |     MST_TO_STR (mst_text); | 
 |     MST_TO_STR (mst_text_gnu_ifunc); | 
 |     MST_TO_STR (mst_slot_got_plt); | 
 |     MST_TO_STR (mst_data); | 
 |     MST_TO_STR (mst_bss); | 
 |     MST_TO_STR (mst_abs); | 
 |     MST_TO_STR (mst_solib_trampoline); | 
 |     MST_TO_STR (mst_file_text); | 
 |     MST_TO_STR (mst_file_data); | 
 |     MST_TO_STR (mst_file_bss); | 
 |  | 
 |     default: | 
 |       return "mst_???"; | 
 |   } | 
 | #undef MST_TO_STR | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | struct minimal_symbol * | 
 | minimal_symbol_reader::record_full (gdb::string_view name, | 
 | 				    bool copy_name, CORE_ADDR address, | 
 | 				    enum minimal_symbol_type ms_type, | 
 | 				    int section) | 
 | { | 
 |   struct msym_bunch *newobj; | 
 |   struct minimal_symbol *msymbol; | 
 |  | 
 |   /* Don't put gcc_compiled, __gnu_compiled_cplus, and friends into | 
 |      the minimal symbols, because if there is also another symbol | 
 |      at the same address (e.g. the first function of the file), | 
 |      lookup_minimal_symbol_by_pc would have no way of getting the | 
 |      right one.  */ | 
 |   if (ms_type == mst_file_text && name[0] == 'g' | 
 |       && (name == GCC_COMPILED_FLAG_SYMBOL | 
 | 	  || name == GCC2_COMPILED_FLAG_SYMBOL)) | 
 |     return (NULL); | 
 |  | 
 |   /* It's safe to strip the leading char here once, since the name | 
 |      is also stored stripped in the minimal symbol table.  */ | 
 |   if (name[0] == get_symbol_leading_char (m_objfile->obfd.get ())) | 
 |     name = name.substr (1); | 
 |  | 
 |   if (ms_type == mst_file_text && startswith (name, "__gnu_compiled")) | 
 |     return (NULL); | 
 |  | 
 |   symtab_create_debug_printf_v ("recording minsym:  %-21s  %18s  %4d  %.*s", | 
 | 				mst_str (ms_type), hex_string (address), section, | 
 | 				(int) name.size (), name.data ()); | 
 |  | 
 |   if (m_msym_bunch_index == BUNCH_SIZE) | 
 |     { | 
 |       newobj = XCNEW (struct msym_bunch); | 
 |       m_msym_bunch_index = 0; | 
 |       newobj->next = m_msym_bunch; | 
 |       m_msym_bunch = newobj; | 
 |     } | 
 |   msymbol = &m_msym_bunch->contents[m_msym_bunch_index]; | 
 |   msymbol->set_language (language_auto, | 
 | 			 &m_objfile->per_bfd->storage_obstack); | 
 |  | 
 |   if (copy_name) | 
 |     msymbol->m_name = obstack_strndup (&m_objfile->per_bfd->storage_obstack, | 
 | 				       name.data (), name.size ()); | 
 |   else | 
 |     msymbol->m_name = name.data (); | 
 |  | 
 |   msymbol->set_value_address (address); | 
 |   msymbol->set_section_index (section); | 
 |  | 
 |   msymbol->set_type (ms_type); | 
 |  | 
 |   /* If we already read minimal symbols for this objfile, then don't | 
 |      ever allocate a new one.  */ | 
 |   if (!m_objfile->per_bfd->minsyms_read) | 
 |     { | 
 |       m_msym_bunch_index++; | 
 |       m_objfile->per_bfd->n_minsyms++; | 
 |     } | 
 |   m_msym_count++; | 
 |   return msymbol; | 
 | } | 
 |  | 
 | /* Compare two minimal symbols by address and return true if FN1's address | 
 |    is less than FN2's, so that we sort into unsigned numeric order. | 
 |    Within groups with the same address, sort by name.  */ | 
 |  | 
 | static inline bool | 
 | minimal_symbol_is_less_than (const minimal_symbol &fn1, | 
 | 			     const minimal_symbol &fn2) | 
 | { | 
 |   if ((&fn1)->value_raw_address () < (&fn2)->value_raw_address ()) | 
 |     { | 
 |       return true;		/* addr 1 is less than addr 2.  */ | 
 |     } | 
 |   else if ((&fn1)->value_raw_address () > (&fn2)->value_raw_address ()) | 
 |     { | 
 |       return false;		/* addr 1 is greater than addr 2.  */ | 
 |     } | 
 |   else | 
 |     /* addrs are equal: sort by name */ | 
 |     { | 
 |       const char *name1 = fn1.linkage_name (); | 
 |       const char *name2 = fn2.linkage_name (); | 
 |  | 
 |       if (name1 && name2)	/* both have names */ | 
 | 	return strcmp (name1, name2) < 0; | 
 |       else if (name2) | 
 | 	return true;		/* fn1 has no name, so it is "less".  */ | 
 |       else if (name1)		/* fn2 has no name, so it is "less".  */ | 
 | 	return false; | 
 |       else | 
 | 	return false;		/* Neither has a name, so they're equal.  */ | 
 |     } | 
 | } | 
 |  | 
 | /* Compact duplicate entries out of a minimal symbol table by walking | 
 |    through the table and compacting out entries with duplicate addresses | 
 |    and matching names.  Return the number of entries remaining. | 
 |  | 
 |    On entry, the table resides between msymbol[0] and msymbol[mcount]. | 
 |    On exit, it resides between msymbol[0] and msymbol[result_count]. | 
 |  | 
 |    When files contain multiple sources of symbol information, it is | 
 |    possible for the minimal symbol table to contain many duplicate entries. | 
 |    As an example, SVR4 systems use ELF formatted object files, which | 
 |    usually contain at least two different types of symbol tables (a | 
 |    standard ELF one and a smaller dynamic linking table), as well as | 
 |    DWARF debugging information for files compiled with -g. | 
 |  | 
 |    Without compacting, the minimal symbol table for gdb itself contains | 
 |    over a 1000 duplicates, about a third of the total table size.  Aside | 
 |    from the potential trap of not noticing that two successive entries | 
 |    identify the same location, this duplication impacts the time required | 
 |    to linearly scan the table, which is done in a number of places.  So we | 
 |    just do one linear scan here and toss out the duplicates. | 
 |  | 
 |    Since the different sources of information for each symbol may | 
 |    have different levels of "completeness", we may have duplicates | 
 |    that have one entry with type "mst_unknown" and the other with a | 
 |    known type.  So if the one we are leaving alone has type mst_unknown, | 
 |    overwrite its type with the type from the one we are compacting out.  */ | 
 |  | 
 | static int | 
 | compact_minimal_symbols (struct minimal_symbol *msymbol, int mcount, | 
 | 			 struct objfile *objfile) | 
 | { | 
 |   struct minimal_symbol *copyfrom; | 
 |   struct minimal_symbol *copyto; | 
 |  | 
 |   if (mcount > 0) | 
 |     { | 
 |       copyfrom = copyto = msymbol; | 
 |       while (copyfrom < msymbol + mcount - 1) | 
 | 	{ | 
 | 	  if (copyfrom->value_raw_address () | 
 | 	      == (copyfrom + 1)->value_raw_address () | 
 | 	      && (copyfrom->section_index () | 
 | 		  == (copyfrom + 1)->section_index ()) | 
 | 	      && strcmp (copyfrom->linkage_name (), | 
 | 			 (copyfrom + 1)->linkage_name ()) == 0) | 
 | 	    { | 
 | 	      if ((copyfrom + 1)->type () == mst_unknown) | 
 | 		(copyfrom + 1)->set_type (copyfrom->type ()); | 
 |  | 
 | 	      copyfrom++; | 
 | 	    } | 
 | 	  else | 
 | 	    *copyto++ = *copyfrom++; | 
 | 	} | 
 |       *copyto++ = *copyfrom++; | 
 |       mcount = copyto - msymbol; | 
 |     } | 
 |   return (mcount); | 
 | } | 
 |  | 
 | static void | 
 | clear_minimal_symbol_hash_tables (struct objfile *objfile) | 
 | { | 
 |   for (size_t i = 0; i < MINIMAL_SYMBOL_HASH_SIZE; i++) | 
 |     { | 
 |       objfile->per_bfd->msymbol_hash[i] = 0; | 
 |       objfile->per_bfd->msymbol_demangled_hash[i] = 0; | 
 |     } | 
 | } | 
 |  | 
 | /* This struct is used to store values we compute for msymbols on the | 
 |    background threads but don't need to keep around long term.  */ | 
 | struct computed_hash_values | 
 | { | 
 |   /* Length of the linkage_name of the symbol.  */ | 
 |   size_t name_length; | 
 |   /* Hash code (using fast_hash) of the linkage_name.  */ | 
 |   hashval_t mangled_name_hash; | 
 |   /* The msymbol_hash of the linkage_name.  */ | 
 |   unsigned int minsym_hash; | 
 |   /* The msymbol_hash of the search_name.  */ | 
 |   unsigned int minsym_demangled_hash; | 
 | }; | 
 |  | 
 | /* Build (or rebuild) the minimal symbol hash tables.  This is necessary | 
 |    after compacting or sorting the table since the entries move around | 
 |    thus causing the internal minimal_symbol pointers to become jumbled.  */ | 
 |    | 
 | static void | 
 | build_minimal_symbol_hash_tables | 
 |   (struct objfile *objfile, | 
 |    const std::vector<computed_hash_values>& hash_values) | 
 | { | 
 |   int i; | 
 |   struct minimal_symbol *msym; | 
 |  | 
 |   /* (Re)insert the actual entries.  */ | 
 |   int mcount = objfile->per_bfd->minimal_symbol_count; | 
 |   for ((i = 0, | 
 | 	msym = objfile->per_bfd->msymbols.get ()); | 
 |        i < mcount; | 
 |        i++, msym++) | 
 |     { | 
 |       msym->hash_next = 0; | 
 |       add_minsym_to_hash_table (msym, objfile->per_bfd->msymbol_hash, | 
 | 				hash_values[i].minsym_hash); | 
 |  | 
 |       msym->demangled_hash_next = 0; | 
 |       if (msym->search_name () != msym->linkage_name ()) | 
 | 	add_minsym_to_demangled_hash_table | 
 | 	  (msym, objfile, hash_values[i].minsym_demangled_hash); | 
 |     } | 
 | } | 
 |  | 
 | /* Add the minimal symbols in the existing bunches to the objfile's official | 
 |    minimal symbol table.  In most cases there is no minimal symbol table yet | 
 |    for this objfile, and the existing bunches are used to create one.  Once | 
 |    in a while (for shared libraries for example), we add symbols (e.g. common | 
 |    symbols) to an existing objfile.  */ | 
 |  | 
 | void | 
 | minimal_symbol_reader::install () | 
 | { | 
 |   int mcount; | 
 |   struct msym_bunch *bunch; | 
 |   struct minimal_symbol *msymbols; | 
 |   int alloc_count; | 
 |  | 
 |   if (m_objfile->per_bfd->minsyms_read) | 
 |     return; | 
 |  | 
 |   if (m_msym_count > 0) | 
 |     { | 
 |       symtab_create_debug_printf ("installing %d minimal symbols of objfile %s", | 
 | 				  m_msym_count, objfile_name (m_objfile)); | 
 |  | 
 |       /* Allocate enough space, into which we will gather the bunches | 
 | 	 of new and existing minimal symbols, sort them, and then | 
 | 	 compact out the duplicate entries.  Once we have a final | 
 | 	 table, we will give back the excess space.  */ | 
 |  | 
 |       alloc_count = m_msym_count + m_objfile->per_bfd->minimal_symbol_count; | 
 |       gdb::unique_xmalloc_ptr<minimal_symbol> | 
 | 	msym_holder (XNEWVEC (minimal_symbol, alloc_count)); | 
 |       msymbols = msym_holder.get (); | 
 |  | 
 |       /* Copy in the existing minimal symbols, if there are any.  */ | 
 |  | 
 |       if (m_objfile->per_bfd->minimal_symbol_count) | 
 | 	memcpy (msymbols, m_objfile->per_bfd->msymbols.get (), | 
 | 		m_objfile->per_bfd->minimal_symbol_count | 
 | 		* sizeof (struct minimal_symbol)); | 
 |  | 
 |       /* Walk through the list of minimal symbol bunches, adding each symbol | 
 | 	 to the new contiguous array of symbols.  Note that we start with the | 
 | 	 current, possibly partially filled bunch (thus we use the current | 
 | 	 msym_bunch_index for the first bunch we copy over), and thereafter | 
 | 	 each bunch is full.  */ | 
 |  | 
 |       mcount = m_objfile->per_bfd->minimal_symbol_count; | 
 |  | 
 |       for (bunch = m_msym_bunch; bunch != NULL; bunch = bunch->next) | 
 | 	{ | 
 | 	  memcpy (&msymbols[mcount], &bunch->contents[0], | 
 | 		  m_msym_bunch_index * sizeof (struct minimal_symbol)); | 
 | 	  mcount += m_msym_bunch_index; | 
 | 	  m_msym_bunch_index = BUNCH_SIZE; | 
 | 	} | 
 |  | 
 |       /* Sort the minimal symbols by address.  */ | 
 |  | 
 |       std::sort (msymbols, msymbols + mcount, minimal_symbol_is_less_than); | 
 |  | 
 |       /* Compact out any duplicates, and free up whatever space we are | 
 | 	 no longer using.  */ | 
 |  | 
 |       mcount = compact_minimal_symbols (msymbols, mcount, m_objfile); | 
 |       msym_holder.reset (XRESIZEVEC (struct minimal_symbol, | 
 | 				     msym_holder.release (), | 
 | 				     mcount)); | 
 |  | 
 |       /* Attach the minimal symbol table to the specified objfile. | 
 | 	 The strings themselves are also located in the storage_obstack | 
 | 	 of this objfile.  */ | 
 |  | 
 |       if (m_objfile->per_bfd->minimal_symbol_count != 0) | 
 | 	clear_minimal_symbol_hash_tables (m_objfile); | 
 |  | 
 |       m_objfile->per_bfd->minimal_symbol_count = mcount; | 
 |       m_objfile->per_bfd->msymbols = std::move (msym_holder); | 
 |  | 
 | #if CXX_STD_THREAD | 
 |       /* Mutex that is used when modifying or accessing the demangled | 
 | 	 hash table.  */ | 
 |       std::mutex demangled_mutex; | 
 | #endif | 
 |  | 
 |       std::vector<computed_hash_values> hash_values (mcount); | 
 |  | 
 |       msymbols = m_objfile->per_bfd->msymbols.get (); | 
 |       /* Arbitrarily require at least 10 elements in a thread.  */ | 
 |       gdb::parallel_for_each (10, &msymbols[0], &msymbols[mcount], | 
 | 	 [&] (minimal_symbol *start, minimal_symbol *end) | 
 | 	 { | 
 | 	   for (minimal_symbol *msym = start; msym < end; ++msym) | 
 | 	     { | 
 | 	       size_t idx = msym - msymbols; | 
 | 	       hash_values[idx].name_length = strlen (msym->linkage_name ()); | 
 | 	       if (!msym->name_set) | 
 | 		 { | 
 | 		   /* This will be freed later, by compute_and_set_names.  */ | 
 | 		   gdb::unique_xmalloc_ptr<char> demangled_name | 
 | 		     = symbol_find_demangled_name (msym, msym->linkage_name ()); | 
 | 		   msym->set_demangled_name | 
 | 		     (demangled_name.release (), | 
 | 		      &m_objfile->per_bfd->storage_obstack); | 
 | 		   msym->name_set = 1; | 
 | 		 } | 
 | 	       /* This mangled_name_hash computation has to be outside of | 
 | 		  the name_set check, or compute_and_set_names below will | 
 | 		  be called with an invalid hash value.  */ | 
 | 	       hash_values[idx].mangled_name_hash | 
 | 		 = fast_hash (msym->linkage_name (), | 
 | 			      hash_values[idx].name_length); | 
 | 	       hash_values[idx].minsym_hash | 
 | 		 = msymbol_hash (msym->linkage_name ()); | 
 | 	       /* We only use this hash code if the search name differs | 
 | 		  from the linkage name.  See the code in | 
 | 		  build_minimal_symbol_hash_tables.  */ | 
 | 	       if (msym->search_name () != msym->linkage_name ()) | 
 | 		 hash_values[idx].minsym_demangled_hash | 
 | 		   = search_name_hash (msym->language (), msym->search_name ()); | 
 | 	     } | 
 | 	   { | 
 | 	     /* To limit how long we hold the lock, we only acquire it here | 
 | 		and not while we demangle the names above.  */ | 
 | #if CXX_STD_THREAD | 
 | 	     std::lock_guard<std::mutex> guard (demangled_mutex); | 
 | #endif | 
 | 	     for (minimal_symbol *msym = start; msym < end; ++msym) | 
 | 	       { | 
 | 		 size_t idx = msym - msymbols; | 
 | 		 msym->compute_and_set_names | 
 | 		   (gdb::string_view (msym->linkage_name (), | 
 | 				      hash_values[idx].name_length), | 
 | 		    false, | 
 | 		    m_objfile->per_bfd, | 
 | 		    hash_values[idx].mangled_name_hash); | 
 | 	       } | 
 | 	   } | 
 | 	 }); | 
 |  | 
 |       build_minimal_symbol_hash_tables (m_objfile, hash_values); | 
 |     } | 
 | } | 
 |  | 
 | /* Check if PC is in a shared library trampoline code stub. | 
 |    Return minimal symbol for the trampoline entry or NULL if PC is not | 
 |    in a trampoline code stub.  */ | 
 |  | 
 | static struct minimal_symbol * | 
 | lookup_solib_trampoline_symbol_by_pc (CORE_ADDR pc) | 
 | { | 
 |   bound_minimal_symbol msymbol | 
 |     = lookup_minimal_symbol_by_pc_section (pc, NULL, | 
 | 					   lookup_msym_prefer::TRAMPOLINE); | 
 |  | 
 |   if (msymbol.minsym != NULL | 
 |       && msymbol.minsym->type () == mst_solib_trampoline) | 
 |     return msymbol.minsym; | 
 |   return NULL; | 
 | } | 
 |  | 
 | /* If PC is in a shared library trampoline code stub, return the | 
 |    address of the `real' function belonging to the stub. | 
 |    Return 0 if PC is not in a trampoline code stub or if the real | 
 |    function is not found in the minimal symbol table. | 
 |  | 
 |    We may fail to find the right function if a function with the | 
 |    same name is defined in more than one shared library, but this | 
 |    is considered bad programming style.  We could return 0 if we find | 
 |    a duplicate function in case this matters someday.  */ | 
 |  | 
 | CORE_ADDR | 
 | find_solib_trampoline_target (frame_info_ptr frame, CORE_ADDR pc) | 
 | { | 
 |   struct minimal_symbol *tsymbol = lookup_solib_trampoline_symbol_by_pc (pc); | 
 |  | 
 |   if (tsymbol != NULL) | 
 |     { | 
 |       for (objfile *objfile : current_program_space->objfiles ()) | 
 | 	{ | 
 | 	  for (minimal_symbol *msymbol : objfile->msymbols ()) | 
 | 	    { | 
 | 	      /* Also handle minimal symbols pointing to function | 
 | 		 descriptors.  */ | 
 | 	      if ((msymbol->type () == mst_text | 
 | 		   || msymbol->type () == mst_text_gnu_ifunc | 
 | 		   || msymbol->type () == mst_data | 
 | 		   || msymbol->type () == mst_data_gnu_ifunc) | 
 | 		  && strcmp (msymbol->linkage_name (), | 
 | 			     tsymbol->linkage_name ()) == 0) | 
 | 		{ | 
 | 		  CORE_ADDR func; | 
 |  | 
 | 		  /* Ignore data symbols that are not function | 
 | 		     descriptors.  */ | 
 | 		  if (msymbol_is_function (objfile, msymbol, &func)) | 
 | 		    return func; | 
 | 		} | 
 | 	    } | 
 | 	} | 
 |     } | 
 |   return 0; | 
 | } | 
 |  | 
 | /* See minsyms.h.  */ | 
 |  | 
 | CORE_ADDR | 
 | minimal_symbol_upper_bound (struct bound_minimal_symbol minsym) | 
 | { | 
 |   short section; | 
 |   struct obj_section *obj_section; | 
 |   CORE_ADDR result; | 
 |   struct minimal_symbol *iter, *msymbol; | 
 |  | 
 |   gdb_assert (minsym.minsym != NULL); | 
 |  | 
 |   /* If the minimal symbol has a size, use it.  Otherwise use the | 
 |      lesser of the next minimal symbol in the same section, or the end | 
 |      of the section, as the end of the function.  */ | 
 |  | 
 |   if (minsym.minsym->size () != 0) | 
 |     return minsym.value_address () + minsym.minsym->size (); | 
 |  | 
 |   /* Step over other symbols at this same address, and symbols in | 
 |      other sections, to find the next symbol in this section with a | 
 |      different address.  */ | 
 |  | 
 |   struct minimal_symbol *past_the_end | 
 |     = (minsym.objfile->per_bfd->msymbols.get () | 
 |        + minsym.objfile->per_bfd->minimal_symbol_count); | 
 |   msymbol = minsym.minsym; | 
 |   section = msymbol->section_index (); | 
 |   for (iter = msymbol + 1; iter != past_the_end; ++iter) | 
 |     { | 
 |       if ((iter->value_raw_address () | 
 | 	   != msymbol->value_raw_address ()) | 
 | 	  && iter->section_index () == section) | 
 | 	break; | 
 |     } | 
 |  | 
 |   obj_section = minsym.obj_section (); | 
 |   if (iter != past_the_end | 
 |       && (iter->value_address (minsym.objfile) | 
 | 	  < obj_section->endaddr ())) | 
 |     result = iter->value_address (minsym.objfile); | 
 |   else | 
 |     /* We got the start address from the last msymbol in the objfile. | 
 |        So the end address is the end of the section.  */ | 
 |     result = obj_section->endaddr (); | 
 |  | 
 |   return result; | 
 | } |