| /* Linux bpf specific support for 64-bit ELF |
| Copyright (C) 2019-2021 Free Software Foundation, Inc. |
| Contributed by Oracle Inc. |
| |
| This file is part of BFD, the Binary File Descriptor library. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| #include "sysdep.h" |
| #include "bfd.h" |
| #include "libbfd.h" |
| #include "elf-bfd.h" |
| #include "elf/bpf.h" |
| #include "libiberty.h" |
| |
| /* In case we're on a 32-bit machine, construct a 64-bit "-1" value. */ |
| #define MINUS_ONE (~ (bfd_vma) 0) |
| |
| #define BASEADDR(SEC) ((SEC)->output_section->vma + (SEC)->output_offset) |
| |
| static bfd_reloc_status_type bpf_elf_generic_reloc |
| (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **); |
| |
| /* Relocation tables. */ |
| static reloc_howto_type bpf_elf_howto_table [] = |
| { |
| /* This reloc does nothing. */ |
| HOWTO (R_BPF_NONE, /* type */ |
| 0, /* rightshift */ |
| 3, /* size (0 = byte, 1 = short, 2 = long) */ |
| 0, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_dont, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_NONE", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| 0, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 64-immediate in LDDW instruction. */ |
| HOWTO (R_BPF_INSN_64, /* type */ |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| false, /* pc_relative */ |
| 32, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_INSN_64", /* name */ |
| true, /* partial_inplace */ |
| MINUS_ONE, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 32-immediate in many instructions. */ |
| HOWTO (R_BPF_INSN_32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 32, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_INSN_32", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 16-bit offsets in instructions. */ |
| HOWTO (R_BPF_INSN_16, /* type */ |
| 0, /* rightshift */ |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 16, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_INSN_16", /* name */ |
| true, /* partial_inplace */ |
| 0x0000ffff, /* src_mask */ |
| 0x0000ffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 16-bit PC-relative address in jump instructions. */ |
| HOWTO (R_BPF_INSN_DISP16, /* type */ |
| 0, /* rightshift */ |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| true, /* pc_relative */ |
| 16, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_INSN_DISP16", /* name */ |
| true, /* partial_inplace */ |
| 0xffff, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| HOWTO (R_BPF_DATA_8_PCREL, |
| 0, /* rightshift */ |
| 0, /* size (0 = byte, 1 = short, 2 = long) */ |
| 8, /* bitsize */ |
| true, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_8_PCREL", /* name */ |
| true, /* partial_inplace */ |
| 0xff, /* src_mask */ |
| 0xff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| HOWTO (R_BPF_DATA_16_PCREL, |
| 0, /* rightshift */ |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| true, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_16_PCREL", /* name */ |
| false, /* partial_inplace */ |
| 0xffff, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| HOWTO (R_BPF_DATA_32_PCREL, |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| true, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_32_PCREL", /* name */ |
| false, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| HOWTO (R_BPF_DATA_8, |
| 0, /* rightshift */ |
| 0, /* size (0 = byte, 1 = short, 2 = long) */ |
| 8, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_unsigned, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_DATA_8", /* name */ |
| true, /* partial_inplace */ |
| 0xff, /* src_mask */ |
| 0xff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| HOWTO (R_BPF_DATA_16, |
| 0, /* rightshift */ |
| 1, /* size (0 = byte, 1 = short, 2 = long) */ |
| 16, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_unsigned, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_DATA_16", /* name */ |
| false, /* partial_inplace */ |
| 0xffff, /* src_mask */ |
| 0xffff, /* dst_mask */ |
| false), /* pcrel_offset */ |
| |
| /* 32-bit PC-relative address in call instructions. */ |
| HOWTO (R_BPF_INSN_DISP32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| true, /* pc_relative */ |
| 32, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_INSN_DISP32", /* name */ |
| true, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 32-bit data. */ |
| HOWTO (R_BPF_DATA_32, /* type */ |
| 0, /* rightshift */ |
| 2, /* size (0 = byte, 1 = short, 2 = long) */ |
| 32, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_DATA_32", /* name */ |
| false, /* partial_inplace */ |
| 0xffffffff, /* src_mask */ |
| 0xffffffff, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| /* 64-bit data. */ |
| HOWTO (R_BPF_DATA_64, /* type */ |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| false, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_bitfield, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_DATA_64", /* name */ |
| false, /* partial_inplace */ |
| 0, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| true), /* pcrel_offset */ |
| |
| HOWTO (R_BPF_DATA_64_PCREL, |
| 0, /* rightshift */ |
| 4, /* size (0 = byte, 1 = short, 2 = long) */ |
| 64, /* bitsize */ |
| true, /* pc_relative */ |
| 0, /* bitpos */ |
| complain_overflow_signed, /* complain_on_overflow */ |
| bpf_elf_generic_reloc, /* special_function */ |
| "R_BPF_64_PCREL", /* name */ |
| false, /* partial_inplace */ |
| MINUS_ONE, /* src_mask */ |
| MINUS_ONE, /* dst_mask */ |
| true), /* pcrel_offset */ |
| }; |
| #undef AHOW |
| |
| /* Map BFD reloc types to bpf ELF reloc types. */ |
| |
| static reloc_howto_type * |
| bpf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, |
| bfd_reloc_code_real_type code) |
| { |
| /* Note that the bpf_elf_howto_table is indexed by the R_ constants. |
| Thus, the order that the howto records appear in the table *must* |
| match the order of the relocation types defined in |
| include/elf/bpf.h. */ |
| |
| switch (code) |
| { |
| case BFD_RELOC_NONE: |
| return &bpf_elf_howto_table[ (int) R_BPF_NONE]; |
| |
| case BFD_RELOC_8_PCREL: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_8_PCREL]; |
| case BFD_RELOC_16_PCREL: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_16_PCREL]; |
| case BFD_RELOC_32_PCREL: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_32_PCREL]; |
| case BFD_RELOC_64_PCREL: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_64_PCREL]; |
| |
| case BFD_RELOC_8: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_8]; |
| case BFD_RELOC_16: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_16]; |
| case BFD_RELOC_32: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_32]; |
| case BFD_RELOC_64: |
| return &bpf_elf_howto_table[ (int) R_BPF_DATA_64]; |
| |
| case BFD_RELOC_BPF_64: |
| return &bpf_elf_howto_table[ (int) R_BPF_INSN_64]; |
| case BFD_RELOC_BPF_32: |
| return &bpf_elf_howto_table[ (int) R_BPF_INSN_32]; |
| case BFD_RELOC_BPF_16: |
| return &bpf_elf_howto_table[ (int) R_BPF_INSN_16]; |
| case BFD_RELOC_BPF_DISP16: |
| return &bpf_elf_howto_table[ (int) R_BPF_INSN_DISP16]; |
| case BFD_RELOC_BPF_DISP32: |
| return &bpf_elf_howto_table[ (int) R_BPF_INSN_DISP32]; |
| |
| default: |
| /* Pacify gcc -Wall. */ |
| return NULL; |
| } |
| return NULL; |
| } |
| |
| /* Map BFD reloc names to bpf ELF reloc names. */ |
| |
| static reloc_howto_type * |
| bpf_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, const char *r_name) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE (bpf_elf_howto_table); i++) |
| if (bpf_elf_howto_table[i].name != NULL |
| && strcasecmp (bpf_elf_howto_table[i].name, r_name) == 0) |
| return &bpf_elf_howto_table[i]; |
| |
| return NULL; |
| } |
| |
| /* Set the howto pointer for a bpf reloc. */ |
| |
| static bool |
| bpf_info_to_howto (bfd *abfd, arelent *bfd_reloc, |
| Elf_Internal_Rela *elf_reloc) |
| { |
| unsigned int r_type; |
| |
| r_type = ELF64_R_TYPE (elf_reloc->r_info); |
| if (r_type >= (unsigned int) R_BPF_max) |
| { |
| /* xgettext:c-format */ |
| _bfd_error_handler (_("%pB: unsupported relocation type %#x"), |
| abfd, r_type); |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| |
| bfd_reloc->howto = &bpf_elf_howto_table [r_type]; |
| return true; |
| } |
| |
| /* Relocate an eBPF ELF section. |
| |
| The RELOCATE_SECTION function is called by the new ELF backend linker |
| to handle the relocations for a section. |
| |
| The relocs are always passed as Rela structures; if the section |
| actually uses Rel structures, the r_addend field will always be |
| zero. |
| |
| This function is responsible for adjusting the section contents as |
| necessary, and (if using Rela relocs and generating a relocatable |
| output file) adjusting the reloc addend as necessary. |
| |
| This function does not have to worry about setting the reloc |
| address or the reloc symbol index. |
| |
| LOCAL_SYMS is a pointer to the swapped in local symbols. |
| |
| LOCAL_SECTIONS is an array giving the section in the input file |
| corresponding to the st_shndx field of each local symbol. |
| |
| The global hash table entry for the global symbols can be found |
| via elf_sym_hashes (input_bfd). |
| |
| When generating relocatable output, this function must handle |
| STB_LOCAL/STT_SECTION symbols specially. The output symbol is |
| going to be the section symbol corresponding to the output |
| section, which means that the addend must be adjusted |
| accordingly. */ |
| |
| #define sec_addr(sec) ((sec)->output_section->vma + (sec)->output_offset) |
| |
| static int |
| bpf_elf_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED, |
| struct bfd_link_info *info, |
| bfd *input_bfd, |
| asection *input_section, |
| bfd_byte *contents, |
| Elf_Internal_Rela *relocs, |
| Elf_Internal_Sym *local_syms, |
| asection **local_sections) |
| { |
| Elf_Internal_Shdr *symtab_hdr; |
| struct elf_link_hash_entry **sym_hashes; |
| Elf_Internal_Rela *rel; |
| Elf_Internal_Rela *relend; |
| |
| symtab_hdr = & elf_tdata (input_bfd)->symtab_hdr; |
| sym_hashes = elf_sym_hashes (input_bfd); |
| relend = relocs + input_section->reloc_count; |
| |
| for (rel = relocs; rel < relend; rel ++) |
| { |
| reloc_howto_type * howto; |
| unsigned long r_symndx; |
| Elf_Internal_Sym * sym; |
| asection * sec; |
| struct elf_link_hash_entry * h; |
| bfd_vma relocation; |
| bfd_reloc_status_type r; |
| const char * name = NULL; |
| int r_type ATTRIBUTE_UNUSED; |
| bfd_signed_vma addend; |
| bfd_byte * where; |
| |
| r_type = ELF64_R_TYPE (rel->r_info); |
| r_symndx = ELF64_R_SYM (rel->r_info); |
| howto = bpf_elf_howto_table + ELF64_R_TYPE (rel->r_info); |
| h = NULL; |
| sym = NULL; |
| sec = NULL; |
| where = contents + rel->r_offset; |
| |
| if (r_symndx < symtab_hdr->sh_info) |
| { |
| sym = local_syms + r_symndx; |
| sec = local_sections [r_symndx]; |
| relocation = BASEADDR (sec) + sym->st_value; |
| |
| name = bfd_elf_string_from_elf_section |
| (input_bfd, symtab_hdr->sh_link, sym->st_name); |
| name = name == NULL ? bfd_section_name (sec) : name; |
| } |
| else |
| { |
| bool warned ATTRIBUTE_UNUSED; |
| bool unresolved_reloc ATTRIBUTE_UNUSED; |
| bool ignored ATTRIBUTE_UNUSED; |
| |
| RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel, |
| r_symndx, symtab_hdr, sym_hashes, |
| h, sec, relocation, |
| unresolved_reloc, warned, ignored); |
| |
| name = h->root.root.string; |
| } |
| |
| if (sec != NULL && discarded_section (sec)) |
| RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section, |
| rel, 1, relend, howto, 0, contents); |
| |
| if (bfd_link_relocatable (info)) |
| continue; |
| |
| switch (howto->type) |
| { |
| case R_BPF_INSN_DISP16: |
| case R_BPF_INSN_DISP32: |
| { |
| /* Make the relocation PC-relative, and change its unit to |
| 64-bit words. Note we need *signed* arithmetic |
| here. */ |
| relocation = ((bfd_signed_vma) relocation |
| - (sec_addr (input_section) + rel->r_offset)); |
| relocation = (bfd_signed_vma) relocation / 8; |
| |
| /* Get the addend from the instruction and apply it. */ |
| addend = bfd_get (howto->bitsize, input_bfd, |
| contents + rel->r_offset |
| + (howto->bitsize == 16 ? 2 : 4)); |
| |
| if ((addend & (((~howto->src_mask) >> 1) & howto->src_mask)) != 0) |
| addend -= (((~howto->src_mask) >> 1) & howto->src_mask) << 1; |
| relocation += addend; |
| |
| /* Write out the relocated value. */ |
| bfd_put (howto->bitsize, input_bfd, relocation, |
| contents + rel->r_offset |
| + (howto->bitsize == 16 ? 2 : 4)); |
| |
| r = bfd_reloc_ok; |
| break; |
| } |
| case R_BPF_DATA_8: |
| case R_BPF_DATA_16: |
| case R_BPF_DATA_32: |
| case R_BPF_DATA_64: |
| { |
| addend = bfd_get (howto->bitsize, input_bfd, where); |
| relocation += addend; |
| bfd_put (howto->bitsize, input_bfd, relocation, where); |
| |
| r = bfd_reloc_ok; |
| break; |
| } |
| case R_BPF_INSN_16: |
| { |
| |
| addend = bfd_get_16 (input_bfd, where + 2); |
| relocation += addend; |
| bfd_put_16 (input_bfd, relocation, where + 2); |
| |
| r = bfd_reloc_ok; |
| break; |
| } |
| case R_BPF_INSN_32: |
| { |
| /* Write relocated value */ |
| |
| addend = bfd_get_32 (input_bfd, where + 4); |
| relocation += addend; |
| bfd_put_32 (input_bfd, relocation, where + 4); |
| |
| r = bfd_reloc_ok; |
| break; |
| } |
| case R_BPF_INSN_64: |
| { |
| /* |
| LDDW instructions are 128 bits long, with a 64-bit immediate. |
| The lower 32 bits of the immediate are in the same position |
| as the imm32 field of other instructions. |
| The upper 32 bits of the immediate are stored at the end of |
| the instruction. |
| */ |
| |
| |
| /* Get the addend. The upper and lower 32 bits are split. |
| 'where' is the beginning of the 16-byte instruction. */ |
| addend = bfd_get_32 (input_bfd, where + 4); |
| addend |= (bfd_get_32 (input_bfd, where + 12) << 32); |
| |
| relocation += addend; |
| |
| bfd_put_32 (input_bfd, (relocation & 0xFFFFFFFF), where + 4); |
| bfd_put_32 (input_bfd, (relocation >> 32), where + 12); |
| r = bfd_reloc_ok; |
| break; |
| } |
| default: |
| r = bfd_reloc_notsupported; |
| } |
| |
| if (r == bfd_reloc_ok) |
| r = bfd_check_overflow (howto->complain_on_overflow, |
| howto->bitsize, |
| howto->rightshift, |
| 64, relocation); |
| |
| if (r != bfd_reloc_ok) |
| { |
| const char * msg = NULL; |
| |
| switch (r) |
| { |
| case bfd_reloc_overflow: |
| (*info->callbacks->reloc_overflow) |
| (info, (h ? &h->root : NULL), name, howto->name, |
| (bfd_vma) 0, input_bfd, input_section, rel->r_offset); |
| break; |
| |
| case bfd_reloc_undefined: |
| (*info->callbacks->undefined_symbol) |
| (info, name, input_bfd, input_section, rel->r_offset, true); |
| break; |
| |
| case bfd_reloc_outofrange: |
| msg = _("internal error: out of range error"); |
| break; |
| |
| case bfd_reloc_notsupported: |
| if (sym != NULL) /* Only if it's not an unresolved symbol. */ |
| msg = _("internal error: relocation not supported"); |
| break; |
| |
| case bfd_reloc_dangerous: |
| msg = _("internal error: dangerous relocation"); |
| break; |
| |
| default: |
| msg = _("internal error: unknown error"); |
| break; |
| } |
| |
| if (msg) |
| (*info->callbacks->warning) (info, msg, name, input_bfd, |
| input_section, rel->r_offset); |
| } |
| } |
| |
| return true; |
| } |
| |
| /* Merge backend specific data from an object file to the output |
| object file when linking. */ |
| |
| static bool |
| elf64_bpf_merge_private_bfd_data (bfd *ibfd, struct bfd_link_info *info) |
| { |
| /* Check if we have the same endianness. */ |
| if (! _bfd_generic_verify_endian_match (ibfd, info)) |
| return false; |
| |
| return true; |
| } |
| |
| /* A generic howto special function for installing BPF relocations. |
| This function will be called by the assembler (via bfd_install_relocation), |
| and by various get_relocated_section_contents functions. |
| At link time, bpf_elf_relocate_section will resolve the final relocations. |
| |
| BPF instructions are always big endian, and this approach avoids problems in |
| bfd_install_relocation. */ |
| |
| static bfd_reloc_status_type |
| bpf_elf_generic_reloc (bfd *abfd, arelent *reloc_entry, asymbol *symbol, |
| void *data, asection *input_section, |
| bfd *output_bfd ATTRIBUTE_UNUSED, |
| char **error_message ATTRIBUTE_UNUSED) |
| { |
| |
| bfd_signed_vma relocation; |
| bfd_reloc_status_type status; |
| bfd_byte *where; |
| |
| /* Sanity check that the address is in range. */ |
| if (reloc_entry->howto->type == R_BPF_INSN_64) |
| { |
| bfd_size_type end = bfd_get_section_limit_octets (abfd, input_section); |
| if (reloc_entry->address > end |
| || end - reloc_entry->address < 16) |
| return bfd_reloc_outofrange; |
| } |
| else if (!bfd_reloc_offset_in_range (reloc_entry->howto, abfd, input_section, |
| reloc_entry->address)) |
| return bfd_reloc_outofrange; |
| |
| /* Get the symbol value. */ |
| if (bfd_is_com_section (symbol->section)) |
| relocation = 0; |
| else |
| relocation = symbol->value; |
| |
| if (symbol->flags & BSF_SECTION_SYM) |
| /* Relocation against a section symbol: add in the section base address. */ |
| relocation += BASEADDR (symbol->section); |
| |
| relocation += reloc_entry->addend; |
| |
| where = (bfd_byte *) data + reloc_entry->address; |
| |
| status = bfd_check_overflow (reloc_entry->howto->complain_on_overflow, |
| reloc_entry->howto->bitsize, |
| reloc_entry->howto->rightshift, 64, relocation); |
| |
| if (status != bfd_reloc_ok) |
| return status; |
| |
| /* Now finally install the relocation. */ |
| if (reloc_entry->howto->type == R_BPF_INSN_64) |
| { |
| /* lddw is a 128-bit (!) instruction that allows loading a 64-bit |
| immediate into a register. the immediate is split in half, with the |
| lower 32 bits in the same position as the imm32 field of other |
| instructions, and the upper 32 bits placed at the very end of the |
| instruction. that is, there are 32 unused bits between them. */ |
| |
| bfd_put_32 (abfd, (relocation & 0xFFFFFFFF), where + 4); |
| bfd_put_32 (abfd, (relocation >> 32), where + 12); |
| } |
| else |
| { |
| /* For other kinds of relocations, the relocated value simply goes |
| BITPOS bits from the start of the entry. This is always a multiple |
| of 8, i.e. whole bytes. */ |
| bfd_put (reloc_entry->howto->bitsize, abfd, relocation, |
| where + reloc_entry->howto->bitpos / 8); |
| } |
| |
| reloc_entry->addend = relocation; |
| reloc_entry->address += input_section->output_offset; |
| |
| return bfd_reloc_ok; |
| } |
| |
| |
| /* The macros below configure the architecture. */ |
| |
| #define TARGET_LITTLE_SYM bpf_elf64_le_vec |
| #define TARGET_LITTLE_NAME "elf64-bpfle" |
| |
| #define TARGET_BIG_SYM bpf_elf64_be_vec |
| #define TARGET_BIG_NAME "elf64-bpfbe" |
| |
| #define ELF_ARCH bfd_arch_bpf |
| #define ELF_MACHINE_CODE EM_BPF |
| |
| #define ELF_MAXPAGESIZE 0x100000 |
| |
| #define elf_info_to_howto_rel bpf_info_to_howto |
| #define elf_info_to_howto bpf_info_to_howto |
| |
| #define elf_backend_may_use_rel_p 1 |
| #define elf_backend_may_use_rela_p 0 |
| #define elf_backend_default_use_rela_p 0 |
| #define elf_backend_relocate_section bpf_elf_relocate_section |
| |
| #define elf_backend_can_gc_sections 0 |
| |
| #define elf_symbol_leading_char '_' |
| #define bfd_elf64_bfd_reloc_type_lookup bpf_reloc_type_lookup |
| #define bfd_elf64_bfd_reloc_name_lookup bpf_reloc_name_lookup |
| |
| #define bfd_elf64_bfd_merge_private_bfd_data elf64_bpf_merge_private_bfd_data |
| |
| #include "elf64-target.h" |