| /* |
| * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved. |
| * |
| * This software may be freely used, copied, modified, and distributed |
| * provided that the above copyright notice is preserved in all copies of the |
| * software. |
| */ |
| |
| /* -*-C-*- |
| * |
| * $Revision$ |
| * $Date$ |
| * |
| */ |
| #ifndef angsd_devsw_h |
| #define angsd_devsw_h |
| |
| #include "devclnt.h" |
| #include "adperr.h" |
| #include "drivers.h" |
| |
| #ifndef __cplusplus |
| typedef struct Packet Packet; |
| typedef struct DevSWState DevSWState; |
| #endif |
| |
| /* |
| * the basic structure used for passing packets around |
| */ |
| struct Packet |
| { |
| struct Packet *pk_next; /* XXX first field in struct */ |
| unsigned int pk_length; |
| unsigned char *pk_buffer; |
| }; |
| |
| /* |
| * control structure, used for maintaining device switcher state |
| */ |
| struct DevSWState |
| { |
| unsigned int ds_opendevchans; /* bitmap of open device channels */ |
| |
| /* |
| * queue of packets read for the various device channels |
| */ |
| Packet *ds_readqueue[DC_NUM_CHANNELS]; |
| |
| /* |
| * structures for managing active read and write operations |
| */ |
| Packet *ds_nextreadpacket; |
| DriverCall ds_activeread; |
| DriverCall ds_activewrite; |
| }; |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* |
| * Function: DevSW_AllocatePacket |
| * Purpose: Claim some memory to hold a struct Packet, and the buffer for |
| * that packet. |
| * |
| * Params: |
| * Input: length Size of the buffer in struct Packet. |
| * |
| * Returns: |
| * OK: Pointer to the newly malloc()ed Packet. |
| * Error: NULL |
| */ |
| Packet *DevSW_AllocatePacket(const unsigned int length); |
| |
| /* |
| * Function: DevSW_FreePacket |
| * Purpose: Free the memory associated with a struct Packet. |
| * |
| * Pre-conditions The structure must have been originally claimed |
| * via DevSW_AllocatePacket. |
| * |
| * Params: |
| * Input: pk The packet to be freed. |
| * |
| * Returns: Nothing |
| */ |
| void DevSW_FreePacket(Packet *pk); |
| |
| /* |
| * Function: DevSW_Open |
| * Purpose: Open the specified device driver |
| * |
| * Params: |
| * Input: name Identifies which device to open. This can either be |
| * a host specific identifier (e.g. "/dev/ttya", |
| * "COM1:"), or a number which is used to refer to |
| * `standard' interfaces, so "1" would be the first host |
| * interface, "2" the second, and so on. |
| * |
| * arg Driver specific arguments. For example, some serial |
| * drivers accept speed and control arguments such as |
| * "9600" or "19200/NO_BREAK". These arguments are |
| * completely free-form: it is the individual drivers |
| * which do the necessary interpretation. |
| * |
| * type The type of packet the caller is interested in. Only |
| * one open is allowed for each type of packet. |
| * |
| * In/Out: device The device driver to open |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_open_failed |
| * adp_device_already_open |
| * adp_malloc_failure |
| */ |
| AdpErrs DevSW_Open(DeviceDescr *device, const char *name, const char *arg, |
| const DevChanID type); |
| |
| /* |
| * Function: DevSW_Match |
| * Purpose: Minimal veneer for DeviceMatch |
| * |
| * Params: |
| * Input: device The device driver to match. |
| * |
| * name Identifies which device to open. This can either be |
| * a host specific identifier (e.g. "/dev/ttya", |
| * "COM1:"), or a number which is used to refer to |
| * `standard' interfaces, so "1" would be the first host |
| * interface, "2" the second, and so on. |
| * |
| * arg Driver specific arguments. For example, some serial |
| * drivers accept speed and control arguments such as |
| * "9600" or "19200/NO_BREAK". These arguments are |
| * completely free-form: it is the individual drivers |
| * which do the necessary interpretation. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_failed |
| */ |
| AdpErrs DevSW_Match(const DeviceDescr *device, const char *name, |
| const char *arg); |
| |
| /* |
| * Function: DevSW_Close |
| * Purpose: Close the specified device driver. All packets of the type |
| * used by the caller held within the switching layer will |
| * be discarded. |
| * |
| * Pre-conditions: Device must have been previously opened. |
| * |
| * Params: |
| * Input: device The device driver to close |
| * |
| * type The type of packet the caller was interested in. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open |
| */ |
| AdpErrs DevSW_Close(DeviceDescr *device, const DevChanID type); |
| |
| /* |
| * Function: DevSW_Read |
| * Purpose: Read a packet of appropriate type from the device driver |
| * |
| * Params: |
| * Input: device The device driver to read packet from. |
| * |
| * type The type of packet the caller is interested in. |
| * |
| * Output: packet Pointer to new packet (if one is available) |
| * NULL (if no complete packet is available) |
| * |
| * Input: block If TRUE, read may safely block for a short period |
| * of time (say up to 20ms), to avoid high CPU load |
| * whilst waiting for a reply. |
| * If FALSE, read MUST NOT block. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_bad_packet |
| * |
| * Post-conditions: The calling function is responsible for freeing the |
| * resources used by the packet when it is no longer |
| * needed. |
| */ |
| AdpErrs DevSW_Read(const DeviceDescr *device, const DevChanID type, |
| Packet **packet, bool block); |
| |
| /* |
| * Function: DevSW_Write |
| * Purpose: Try to write a packet to the device driver. The write will |
| * be bounced if another write is still in progress. |
| * |
| * Params: |
| * Input: device The device driver to write a packet to. |
| * |
| * packet The packet to be written. |
| * |
| * type The type to be assigned to the packet. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_illegal_args |
| * adp_write_busy |
| * |
| * Post-conditions: The calling function retains "ownership" of the packet, |
| * i.e. it is responsible for freeing the resources used |
| * by the packet when it is no longer needed. |
| */ |
| AdpErrs DevSW_Write(const DeviceDescr *device, Packet *packet, DevChanID type); |
| |
| /* |
| * Function: DevSW_FlushPendingWrite |
| * Purpose: If a write is in progress, give it a chance to finish. |
| * |
| * Params: |
| * Input: device The device driver to flush. |
| * |
| * Returns: |
| * adp_ok no pending write, or write flushed completely |
| * adp_write_busy pending write not flushed completely |
| */ |
| AdpErrs DevSW_FlushPendingWrite(const DeviceDescr *device); |
| |
| /* |
| * Function: DevSW_Ioctl |
| * Purpose: Perform miscellaneous control operations. This is a minimal |
| * veneer to DeviceIoctl. |
| * |
| * Params: |
| * Input: device The device driver to control. |
| * |
| * opcode Reason code indicating the operation to perform. |
| * |
| * In/Out: args Pointer to opcode-sensitive arguments/result space. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_failed |
| */ |
| AdpErrs DevSW_Ioctl(const DeviceDescr *device, const int opcode, void *args); |
| |
| /* |
| * Function: DevSW_WriteFinished |
| * Purpose: Return TRUE if the active device has finished writing |
| * the last packet to be sent, or FALSE if a packet is still |
| * being transmitted. |
| * |
| * Params: |
| * Input: device The device driver to check. |
| * |
| * Returns: |
| * TRUE: write finished or inactive |
| * FALSE: write in progress |
| */ |
| bool DevSW_WriteFinished(const DeviceDescr *device); |
| |
| |
| /* |
| * set filename and enable/disable logginf of ADP packets |
| */ |
| void DevSW_SetLogfile(const char *filename); |
| void DevSW_SetLogEnable(int logEnableFlag); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* ndef angsd_devsw_h */ |
| |
| /* EOF devsw.h */ |