| 2006-10-02 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Backport: |
| 2006-06-15 Daniel Jacobowitz <dan@codesourcery.com> |
| * Makefile.def (fixincludes): Correct extra_configure_flags |
| typo. |
| (expat): Don't install. Don't build shared libraries. |
| * Makefile.in: Regenerated. |
| |
| 2006-09-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * buildsym.c, symtab.c: Add local hack for FILENAME_CMP testing. |
| * utils.c (cygwin_filename_cmp): New. |
| |
| Backport: |
| 2006-04-21 Frederic Riss <frederic.riss@st.com> |
| * dwarf2read.c (dwarf2_start_subfile): Change prototype to accept |
| compilation directory as last argument. |
| Always pass comp_dir as second argument to start_subfile and prepend |
| dirname to the filename when necessary. |
| Remove now superfluous search for pre-existing subfile. |
| (dwarf_decode_lines): Pass the compilation directory to |
| dwarf2_start_subfile. |
| |
| gdb/testsuite/ |
| * config/symbian.exp (gdb_target_symbian): Handle a running target. |
| (gdb_load): Add return value. |
| |
| * gdb.base/completion.exp: Test arg rather than a. Handle |
| very small lists of symbols. |
| |
| * gdb.base/list.exp: Differentiate run behavior based on |
| use_gdb_stub. |
| |
| * gdb.base/maint.exp: Accept local symbols. Accept missing .data. |
| |
| * gdb.base/remote.exp: Update packet limits. |
| |
| * gdb.base/varargs.exp: Don't pass an empty list item. |
| |
| * lib/gdb.exp (fullname_syntax): Recognize forward slashes in DOS |
| paths. |
| |
| Backport: |
| 2006-06-22 Daniel Jacobowitz <dan@codesourcery.com> |
| * gdb.base/gdb1555.exp: Use gdb_compile_shlib. Skip if not |
| native. |
| |
| 2006-06-22 Daniel Jacobowitz <dan@codesourcery.com> |
| * gdb.stabs/exclfwd.exp: Skip the test if configure did not |
| enable stabs testing. |
| |
| 2006-05-06 Ulrich Weigand <Ulrich.Weigand@de.ibm.com> |
| * gdb.mi/mi-basics.exp: Add missing serial number to |
| expected output in some mi_gdb_test statements. |
| * gdb.mi/mi2-basics.exp: Likewise. |
| |
| 2006-09-25 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.arch/thumb-prologue.c: Update breakpoint mechanism. Restore |
| lr before returning for completeness. |
| * gdb.arch/thumb-prologue.exp: Update to set a breakpoint. |
| |
| 2006-09-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * infrun.c (handle_inferior_event): Always clear stop_stack_dummy. |
| Don't check it for load events. |
| |
| 2006-09-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * config/symbian.exp (cyg_to_win): New. |
| (symbian_compile): Use it. Handle c++ and incdir. |
| |
| 2006-09-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.base/commands.exp (bp_deleted_in_command_test) |
| (temporary_breakpoint_commands): Allow run.c without a pathname. |
| * gdb.base/ending-run.exp: Allow E32Main. |
| |
| 2006-09-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * config/symbian.exp (infer_host_exec): Cope with MI. |
| (mi_target_gdb_load): New. |
| * lib/mi-support.exp: Use mi_target_gdb_load. |
| |
| 2006-09-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * gdb.base/args.c (main): Add breakpoint marker. |
| * gdb.base/args.exp: Use args_test for tests. Add new tests which |
| really test empty arguments. |
| (args_load): Delete. |
| (args_test): New. |
| |
| 2006-08-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * remote.c (remote_start_remote, extended_remote_attach_1) |
| (extended_remote_mourn_1, extended_remote_run): Use only rs->buf. |
| |
| 2006-08-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * config/symbian.exp (symbian_compile): Fail after unknown options. |
| Copy ELF files from the build tree. |
| * gdb.asm/asm-source.exp: Use untested. |
| |
| 2006-08-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/testsuite/ |
| * config/symbian.exp: New file. |
| |
| 2006-08-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * objfiles.c (init_entry_point_info): Handle shared objects |
| with entry points. |
| |
| 2006-07-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * symfile.c (symfile_section_offset_from_segment): Correct |
| last change. |
| |
| * solib.c (solib_open): Always set errno. |
| |
| 2006-07-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| gdb/ |
| * symfile.c (symfile_map_offsets_to_segments): Don't warn |
| for empty sections. |
| (symfile_section_offset_from_segment): Likewise. |
| |
| 2006-06-02 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c (remote_hostio_write): Correct buffer length |
| calculation. |
| |
| 2006-06-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/exec.c (exec_set_section_address): Always update the |
| section's address. |
| * gdb/objfiles.c (objfile_relocate): Also relocate the |
| target sections table. |
| * gdb/Makefile.in (objfiles.o): Update. |
| |
| * gdb/remote.c (remote_xfer_partial): Fail if the target is not |
| running. |
| |
| 2006-06-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c (remote_download_command): Use FILEIO_O_TRUNC. |
| |
| 2006-06-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c (remote_hostio_parse_result): Check for strtol |
| errors. |
| |
| 2006-06-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/doc/gdb.texinfo (Host I/O Packets): Mention explicit negative |
| signs. |
| |
| 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c (remote_download_command): Correct short write |
| handling. |
| |
| 2006-05-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c (remote_fileio_errno_to_host) |
| (remote_hostio_error): Rename argument to errnum. |
| (_initialize_remote): Update calls to add_packet_config_cmd. |
| |
| 2006-05-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c: Include "gdb/fileio.h". |
| (PACKET_Fopen, PACKET_Fread, PACKET_Fwrite, PACKET_Fclose): New |
| enums. |
| (remote_escape_output, remote_unescape_input): New functions. |
| (remote_write_bytes): Use remote_escape_output. |
| (readchar): Do not mask off the high bit. |
| (read_frame): Print binary packets correctly. |
| (getpkt_sane): Likewise. Return the number of bytes read |
| or -1. |
| (remote_buffer_add_string, remote_buffer_add_bytes) |
| (remote_buffer_add_int, remote_hostio_parse_result) |
| (remote_hostio_send_command, remote_hostio_open) |
| (remote_hostio_write, remote_hostio_read) |
| (remote_hostio_close, remote_fileio_errno_to_host) |
| (remote_hostio_error, fclose_cleanup, remote_download_command) |
| (remote_upload_command): New functions. |
| (_initialize_remote): Register new packets and remote-upload |
| and remote-download commands. |
| |
| * gdb/doc/gdb.texinfo (File Transfer): New section. |
| (Remote Configuration): Document Host I/O packet commands. |
| (Host I/O Packets): New section. |
| (Packets): Mention overloading of F prefix. |
| |
| * gdb/gdbserver/Makefile.in (OBS): Add hostio.o. |
| (hostio.o): New rule. |
| * gdb/gdbserver/hostio.c: New file. |
| * gdb/gdbserver/remote-utils.c (putpkt_binary): New function, |
| broken out from putpkt. |
| (putpkt): Use it. |
| (readchar): Do not mask the high bits. Correct the buffer |
| type. |
| * gdb/gdbserver/server.c (main): Leave space for a trailing |
| zero in the packet buffer. Save the length of the |
| received packet. Handle Host I/O requests. Optionally call |
| putpkt_binary. |
| * gdb/gdbserver/server.h (handle_f_hostio, putpkt_binary): New |
| prototypes. |
| |
| 2006-05-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/frame.c (get_prev_frame): Move check for pc == 0 ... |
| (get_prev_frame_1): ... to here. |
| |
| 2006-05-09 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/bsd-uthread.c (bsd_uthread_solib_loaded): Always pass 0 for |
| from_tty. |
| * gdb/remote.c (remote_get_shared_libraries): Don't call solib_add. |
| * gdb/solib.c: Include "exceptions.h". |
| (solib_map_sections): Throw NOT_FOUND_ERROR if appropriate. |
| (symbol_add_stub): Delete. |
| (solib_read_symbols): Use TRY_CATCH. Inline symbol_add_stub. |
| Use current from_tty, not a copy from the so_list. Don't warn |
| a second time for a missing library. |
| (update_solib_list): Don't save from_tty. Use TRY_CATCH. Print |
| out a single warning for all missing libraries. |
| * gdb/solist.h (struct so_list): Remove from_tty. |
| * gdb/Makefile.in (solib.o): Update. |
| |
| 2006-05-08 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/remote.c (remote_get_shared_libraries): Check for NULL ops. |
| (remote_wait): Handle ",nop" on DLL packets and "dll:dll" response. |
| |
| 2006-05-08 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/solib-target.c (solib_target_remove_one_solib): Correct loop |
| logic. |
| |
| 2006-04-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-tdep.c (thumb_heuristic_function_start): New function. |
| (thumb_scan_prologue): Use it. |
| (arm_prologue_this_id): Adjust LOWEST_PC check. |
| |
| 2006-04-19 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Merge from gdb-csl-20060226-branch: |
| |
| 2006-04-19 Daniel Jacobowitz <dan@codesourcery.com> |
| * gdb/doc/gdb.texinfo (Remote configuration): Mention "set remote |
| load-offsets". |
| (General Query Packets): Document qPartInfo. |
| |
| 2006-04-18 Mark Mitchell <mark@codesourcery.com> |
| Issue #655 |
| * gdb/mt-tdep.c (mt_gdb_regnums): Add ZI2, ZQ2, Ichannel2, |
| Iscramb2, Qscramb2, Qchannel2. |
| (mt_register_name): Likewise. |
| (mt_copro_register_type): Describe ZI2 and ZQ2. |
| |
| 2006-04-11 Mark Mitchell <mark@codesourcery.com> |
| Issue #658 |
| * gdb/mt-tdep.c (mt_gdb_regnums): Define |
| MT_COPRO_PSEUDOREG_MAC_REGNUM. |
| (mt_register_name): Use it. |
| (mt_copro_register_type): Likewise. |
| (mt_register_type): Likewise. |
| (mt_pseudo_register_read): Likewise. Read the MAC register, not |
| the coprocessor register. |
| (mt_pseudo_register_write): Likewise. |
| |
| 2006-04-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/buildsym.c (start_subfile): Handle producer. |
| (record_producer): New function. |
| * gdb/buildsym.h (struct subfile): Include producer. |
| (record_producer): New prototype. |
| * gdb/dwarf2-frame.c (struct dwarf2_cie): Add version. |
| (struct dwarf2_frame_state): Add armcc_cfa_offsets_sf and |
| armcc_cfa_offsets_reversed. |
| (execute_cfa_program): Handle armcc_cfa_offsets_sf. |
| (dwarf2_frame_find_quirks): New function. |
| (dwarf2_frame_cache): Call it. Handle armcc_cfa_offsets_reversed. |
| (decode_frame_entry_1): Record the CIE version. |
| * gdb/dwarf2read.c (read_file_scope): Save the producer. |
| * gdb/symtab.h (struct symtab): Rename unused version member to |
| producer. |
| |
| 2006-04-12 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/Makefile.in (ALLDEPFILES): Add solib-target.c. |
| (remote.o): Update dependencies. |
| (solib-target.o, symbian-tdep.o): New rules. |
| * gdb/arm-tdep.c (arm_mode_strings, arm_fallback_mode_string) |
| (arm_force_mode_string): New. |
| (arm_pc_is_thumb): Use them. |
| (thumb_scan_prologue): Abort scan when symbols are missing. |
| (arm_show_fallback_mode, arm_show_force_mode): New. |
| (_initialize_arm_tdep): Register fallback-mode and force-mode. |
| * gdb/configure.tgt: Add arm*-*-symbian*. |
| * gdb/infcmd.c (_initialize_infcmd): Make "set args" a string |
| variable. |
| * gdb/inflow.c (kill_command): Assume that a target with stack |
| can have a frame. |
| * gdb/infrun.c (init_wait_for_inferior): Clear |
| target_last_wait_ptid. |
| (insert_step_resume_breakpoint_at_frame): Add use_previous argument. |
| Use get_prev_frame if requested. |
| (handle_inferior_event): Update TARGET_WAITKIND_LOADED support. |
| Update calls to insert_step_resume_breakpoint_at_frame. |
| * gdb/remote.c: Include "solist.h". |
| (remote_exec_file): New variable. |
| (PACKET_vAttach, PACKET_vRun, PACKET_qfDllInfo): New enums. |
| (remote_mark_running, remote_mark_killed): New functions. |
| (extended_remote_restart): Don't send a query. |
| (get_offsets): Handle TextSeg and DataSeg response. |
| (parse_load_response, remote_get_shared_libraries): New functions. |
| (remote_start_remote): Take a target as the second argument for |
| extended mode. Check whether the target is running. Reset |
| inferior_ptid here. |
| (remote_open_1): Assume the target is running. Don't reset |
| inferior_ptid here. Pass the target to remote_start_remote |
| in extended mode. Only do some setup if the target is running. |
| (remote_detach_1): New function, renamed from remote_detach. |
| Don't say we are disconnecting if we aren't. |
| (remote_detach): Call remote_detach_1. |
| (extended_remote_detach): New function. |
| (remote_disconnect): Take a target_ops argument. Correct the |
| error message. Call remote_mourn_1 directly. |
| (extended_remote_attach_1, extended_remote_attach) |
| (extended_async_remote_attach): New functions. |
| (remote_wait): Handle load and unload events. |
| (extended_remote_mourn_1): New function. |
| (extended_remote_mourn): Replace with a call to |
| extended_remote_mourn_1. |
| (extended_async_remote_mourn): New function. |
| (extended_remote_run): New function. |
| (extended_remote_create_inferior_1): New function, from |
| extended_remote_create_inferior. Call get_offsets. |
| (extended_remote_create_inferior) |
| (extended_remote_async_create_inferior): Use it. |
| (remote_stopped_by_watchpoint, crc32_table) |
| (compare_sections_command): Whitespace tweaks. |
| (init_remote_ops, init_extended_remote_ops): Update. |
| (init_remote_async_ops): Whitespace tweaks and update. |
| (init_extended_async_remote_ops): Update. |
| (_initialize_remote): Add new configurable packets. Add |
| "set remote exec-file". |
| * gdb/solib-som.c (som_current_sos): Set addr_low and addr_high. |
| * gdb/solib-target.c: New file. |
| * gdb/solib.c (solib_symbols_extension): New variable. |
| (solib_open): Use it. |
| (solib_map_sections): Set addr_low and addr_high instead of |
| textsection. |
| (info_sharedlibrary_command): Use addr_low and addr_high. |
| * gdb/solib.h (solib_symbols_extension): New declaration. |
| * gdb/solist.h (struct so_list): Replace textsection |
| with addr_low and addr_high. |
| (struct target_so_ops): Add add_one_solib and remove_one_solib. |
| * gdb/symbian-tdep.c: New file. |
| * gdb/symfile.c (init_objfile_sect_indices): Use |
| symfile_find_segment_sections to find the text section. |
| (symfile_find_segments, symfile_find_segment_sections) |
| (symfile_map_offsets_to_segments, symfile_find_segment_lengths) |
| (symfile_section_offset_from_segment): New functions. |
| * gdb/symfile.h (symfile_map_offsets_to_segments) |
| (symfile_section_offset_from_segment) |
| (symfile_find_segment_lengths): New prototypes. |
| * gdb/target.c (debug_to_disconnect): Delete. |
| (update_current_target): Make global. Do not inherit to_disconnect. |
| Mention to_get_shared_libraries. |
| (target_disconnect): Search for to_disconnect. |
| (target_get_shared_libraries): New. |
| (setup_target_debug): Update. |
| * gdb/target.h (struct target_ops): Update to_disconnect prototype. |
| Add to_get_shared_libraries. |
| (target_has_execution): Update comment. |
| (target_get_shared_libraries, update_current_target): New |
| prototypes. |
| * gdb/cli/cli-setshow.c (do_setshow_command): Revise string variable |
| handling. |
| * gdb/config/arm/symbian.mt: New file. |
| * gdb/doc/gdb.texinfo (ARM): Document set/show arm fallback-mode |
| and set/show arm force-mode. |
| |
| * gdb/testsuite/gdb.base/define.exp: Don't use backslashes in the |
| prompt. |
| |
| * readline/emacs_keymap.c: Add a MINGW32 hack. |
| * readline/readline.c: Use _rl_bind_if_unbound to avoid macro bugs. |
| |
| * gdb/gdbserver/linux-low.c (linux_kill): Reset inferior thread and |
| process lists. |
| (linux_detach): Likewise. |
| (linux_wait_for_process): Discard unexpected exits. |
| * gdb/gdbserver/remote-utils.c (unblock_async_io): Ignore if we are |
| restarting. |
| * gdb/gdbserver/server.c (exit_requested, restarting_program) |
| (program_argv): New variables. |
| (attached): Move higher. |
| (start_inferior): Clear attached. Use restarting_program to avoid |
| troubles with the 'R' packet. |
| (attach_inferior): Set attached. |
| (handle_query): Implement "monitor exit". |
| (handle_query_non_running): New function. |
| (handle_v_cont): Report errors. |
| (handle_v_attach, handle_v_run): New. |
| (handle_v_requests): Handle vAttach and vRun. |
| (handle_v_requests_non_running, non_running): New. |
| (debug_threads): Add declaration. |
| (main): Handle --debug. Don't adjust attached here. |
| Save the argv. Keep track of requested exits. Use |
| non_running when the target is dead. Do not always exit |
| after detach. Fix up Hc support. Do not automatically |
| restart the inferior in extended mode. |
| |
| 2006-04-12 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Backport: |
| 2006-04-12 Daniel Jacobowitz <dan@codesourcery.com> |
| * remote.c (extended_remote_restart): Pass the correct length |
| to getpkt. |
| |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| * remote.c (struct remote_state): Add BUF and BUF_SIZE. |
| (init_remote_state): Initialize the new fields. |
| (get_memory_packet_size): Update BUF and BUF_SIZE if necessary. |
| (set_thread, remote_thread_alive, remote_unpack_thread_info_response) |
| (remote_get_threadinfo, parse_threadlist_response) |
| (remote_get_threadlist, remote_current_thread, remote_threads_info) |
| (remote_threads_extra_info, extended_remote_restart, get_offsets) |
| (remote_check_symbols, remote_open_1, remote_detach) |
| (remove_vcont_probe, remote_vcont_resume, remote_resume) |
| (remote_wait, remote_async_wait, fetch_register_using_p) |
| (remote_fetch_registers, store_register_using_P) |
| (remote_store_registers, check_binary_download, remote_write_bytes) |
| (remote_read_bytes, remote_insert_breakpoint) |
| (remote_remove_breakpoint, remote_insert_watchpoint) |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) |
| (remote_remove_hw_breakpoint, compare_sections_command) |
| (remote_xfer_partial, remote_rcmd, packet_command) |
| (remote_get_thread_local_address): Use the global incoming buffer |
| instead of alloca or xmalloc. Limit outgoing packets to |
| rs->remote_packet_size and incoming packets to rs->buf_size. |
| Update calls to getpkt and remote_send. |
| (remote_send): Take arguments by reference. |
| (putpkt_binary): Eliminate junkbuf. Use skip_frame. |
| (skip_frame): New function. |
| (read_frame): Take arguments by reference. Expand the packet |
| buffer instead of issuing an error. |
| (getpkt, getpkt_sane): Take arguments by reference. |
| * remote.h (getpkt): Update prototype and doc. |
| * tracepoint.c (remote_get_noisy_reply): Take arguments by |
| reference. |
| (target_buf): Change from array to pointer. |
| (target_buf_size): New variable. |
| (remote_set_transparent_ranges): Update call to getpkt. |
| (trace_start_command, trace_stop_command, trace_status_command): |
| Update calls to remote_get_noisy_reply. |
| (finish_tfind_command): Take arguments by reference. |
| (trace_find_command, trace_find_pc_command) |
| (trace_find_tracepoint_command, trace_find_line_command): |
| (trace_find_range_command, trace_find_outside_command): Update |
| calls to finish_tfind_command. |
| (_initialize_tracepoint): Initialize target_buf_size and target_buf. |
| |
| 2006-04-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/breakpoint.c (insert_bp_location, reattach_breakpoints) |
| (remove_breakpoint, delete_breakpoint): Update calls to changed |
| methods. |
| (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) |
| (single_step_breakpoints, insert_single_step_breakpoint) |
| (remove_single_step_breakpoints): New. |
| * gdb/breakpoint.h (struct bp_location): Add placed_address and |
| placed_size. Move shadow_contents below the new comment. |
| (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) |
| (insert_single_step_breakpoint, remove_single_step_breakpoints): New |
| prototypes. |
| * gdb/gdbarch.sh: Forward struct bp_location in gdbarch.h. |
| (memory_insert_breakpoint, memory_remove_breakpoint): Update second |
| argument. |
| * gdb/mem-break.c (default_memory_insert_breakpoint): Update. Set |
| placed_address and placed_size. |
| (default_memory_remove_breakpoint): Update. Don't use |
| BREAKPOINT_FROM_PC. |
| (memory_insert_breakpoint, memory_remove_breakpoint): Update. |
| * gdb/target.c (update_current_target): Update prototypes for changed |
| functions. |
| (debug_to_insert_breakpoint, debug_to_remove_breakpoint) |
| (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): |
| Update. |
| * gdb/target.h: Forward declare struct bp_location. |
| (struct target_ops): Use a bp_location argument for |
| to_insert_breakpoint, to_remove_breakpoint, |
| to_insert_hw_breakpoint, and to_remove_hw_breakpoint. |
| (target_insert_breakpoint, target_remove_breakpoint) |
| (target_insert_hw_breakpoint, target_remove_hw_breakpoint) |
| (memory_insert_breakpoint, memory_remove_breakpoint) |
| (default_memory_insert_breakpoint, default_memory_remove_breakpoint): |
| Update. |
| * gdb/config/i386/nm-i386.h: Forward declare struct bp_location. |
| (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. |
| (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise. |
| |
| * gdb/gdbarch.c, gdbarch.h: Regenerated. |
| |
| * gdb/alpha-tdep.c (alpha_software_single_step): Use |
| insert_single_step_breakpoint and remove_single_step_breakpoints. |
| Remove unused statics. |
| * gdb/arm-tdep.c (arm_software_single_step): Likewise. Add a note. |
| * gdb/cris-tdep.c (cris_software_single_step): Likewise. |
| * gdb/mips-tdep.c (mips_software_single_step): Likewise. |
| * gdb/rs6000-tdep.c (rs6000_software_single_step): Likewise. |
| * gdb/sparc-tdep.c (sparc_software_single_step): Likewise. |
| * gdb/wince.c (struct thread_info_struct): Remove step_prev. |
| (undoSStep): Use remove_single_step_breakpoints. |
| (wince_software_single_step): Use insert_single_step_breakpoint. |
| |
| * gdb/corelow.c (ignore): Remove unneeded prototype. Update second |
| argument. |
| * gdb/exec.c (ignore): Likewise. |
| * gdb/sol-thread.c (ignore): Likewise. |
| |
| * gdb/procfs.c (dbx_link_bpt_addr, dbx_link_shadow_contents): Delete. |
| (dbx_link_bpt): New. |
| (procfs_wait): Check it. |
| (procfs_mourn_inferior): Remove it if necessary. |
| (remove_dbx_link_breakpoint): Use it. |
| (insert_dbx_link_bpt_in_file): Set it. |
| (procfs_init_inferior): Don't update dbx_link_bpt_addr. |
| * gdb/rs6000-nat.c (exec_one_dummy_insn): Use |
| deprecated_insert_raw_breakpoint and |
| deprecated_remove_raw_breakpoint. |
| * gdb/solib-irix.c (shadow_contents, breakpoint_addr): Delete. |
| (base_breakpoint): New. |
| (disable_break): Use it. |
| (enable_break): Set it. |
| |
| * gdb/i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): |
| Update. |
| * gdb/ia64-tdep.c (ia64_memory_insert_breakpoint) |
| (ia64_memory_remove_breakpoint): Likewise. |
| * gdb/m32r-tdep.c (m32r_memory_insert_breakpoint) |
| (m32r_memory_remove_breakpoint): Likewise. |
| * gdb/monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): |
| Likewise. Remove unnecessary prototypes. Use placed_address |
| and placed_size. Removed useless read from memory. |
| * gdb/nto-procfs.c (procfs_insert_breakpoint) |
| (procfs_remove_breakpoint, procfs_insert_hw_breakpoint) |
| (procfs_remove_hw_breakpoint): Update. |
| * gdb/ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. |
| * gdb/ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. |
| * gdb/ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. |
| * gdb/ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise. |
| * gdb/remote-e7000.c (e7000_insert_breakpoint) |
| (e7000_remove_breakpoint): Likewise. |
| * gdb/remote-m32r-sdi.c (m32r_insert_breakpoint) |
| (m32r_remove_breakpoint): Likewise. |
| * gdb/remote-mips.c (mips_insert_breakpoint) |
| (mips_remove_breakpoint): Likewise. |
| * gdb/remote-rdp.c (remote_rdp_insert_breakpoint) |
| (remote_rdp_remove_breakpoint): Likewise. |
| (rdp_step): Use deprecated_insert_raw_breakpoint and |
| deprecated_remove_raw_breakpoint. |
| * gdb/remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint): |
| Update. |
| * gdb/remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint): |
| Delete. |
| (init_gdbsim_ops): Use memory_insert_breakpoint and |
| memory_remove_breakpoint. |
| * gdb/remote-st.c (st2000_insert_breakpoint) |
| (st2000_remove_breakpoint): Update. Remove unused |
| BREAKPOINT_FROM_PC. |
| * gdb/remote.c (remote_insert_breakpoint, remote_remove_breakpoint): |
| Update. Use placed_address and placed_size. |
| (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. |
| |
| * gdb/doc/gdbint.texinfo (Watchpoints, Target Conditionals): Update insert |
| and remove breakpoint prototypes. |
| |
| 2006-04-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Backport: |
| 2006-04-07 Daniel Jacobowitz <dan@codesourcery.com> |
| * remote.c (remote_wait): Convert warning to error before |
| parsing corrupt packets. |
| |
| 2006-04-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * bfd/cpu-arm.c (bfd_is_arm_mapping_symbol_name): Accept more |
| mapping symbols. |
| |
| 2006-04-11 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Backport: |
| 2006-03-09 Paul Brook <paul@codesourcery.com> |
| * bfd/cpu-arm.c (bfd_is_arm_mapping_symbol_name): Recognise additional |
| mapping symbols. |
| |
| 2006-04-02 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.def (host_modules, dependencies): Add expat. |
| * configure.in (host_libs): Add expat. |
| * Makefile.in, configure: Regenerate. |
| * expat: New directory. |
| |
| * gdb/Makefile.in: Add expat, new files, and xml-builtin.c. Update |
| dependencies. |
| * gdb/acinclude.m4: Include stdint.m4. |
| * gdb/configure.ac: Use AC_C_BIGENDIAN and GCC_HEADER_STDINT. |
| * gdb/aclocal.m4, gdb/config.in, gdb/configure: Regenerate. |
| |
| * gdb/auxv.h: Remove target_auxv_read prototype. |
| * gdb/auxv.c, gdb/avr-tdep.c, gdb/ia64-tdep.c, gdb/linux-nat.c, |
| gdb/procfs.c: Use target_read_whole. |
| * gdb/sparc-tdep.c: Use target_read. |
| |
| * gdb/frame.c: Work around null frame_id handling. |
| |
| * gdb/breakpoint.c, gdb/f-valprint.c, gdb/infcmd.c, gdb/inflow.c, |
| gdb/infrun.c, gdb/stack.c, gdb/valops.c, gdb/varobj.c, |
| gdb/cli-cmds.c, gdb/testsuite/gdb.base/default.exp, |
| gdb/tui/tui-disasm.c, gdb/tui/tui-source.c, |
| gdb/tui/tui-winsource.c: Selected frame fixups. |
| |
| * gdb/README.AVAIL, gdb/available.c, gdb/available.h, |
| gdb/parse-avail.c, gdb/sha1.c, gdb/features/feature_to_c.sh, |
| gdb/features/gdb-target.dtd: New files. |
| * gdb/arm-tdep.c: Handle missing FPA, present VFP, and |
| self-described registers. Decode VFP register numbers from DWARF. |
| * gdb/arm-tdep.h: Add flags for VFP and FPA. |
| * gdb/gdbarch.sh: Add available_features_support and feature_set. |
| Export the arch's obstack. Check feature sets. Improve error |
| handling. |
| * gdb/gdbarch.c, gdb/gdbarch.h: Regenerated. |
| * gdb/infcmd.c: Trigger architecture selection. |
| * gdb/remote.c: Available feature support. qPacketInfo support. |
| Improved g/G packet support. Improved qPart support. |
| qPart:features support. |
| * gdb/symfile.c: Adjust download_write_size. |
| * gdb/target.c: Revise partial transfer support. Handle available |
| features method. Add target_read_whole. |
| * gdb/target.h: Add the available features object and methods. |
| * gdb/doc/gdb.texinfo: Document new features. |
| |
| * gdb/symfile.h: Include symtab.h. |
| |
| 2006-03-31 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/config/m68k/monitor.mt (TDEPFILES): Remove unneeded |
| monitors. |
| (DEPRECATED_TM_FILE): Remove. |
| |
| * gdb/m68k-tdep.c (M68K_FPREG_SIZE): Define. |
| (REGISTER_BYTES_FP): Use it. |
| |
| * gdb/configure.tgt (m68k-*-uclinux*): target is linux. |
| |
| * gdb/remote.c (remote_fetch_registers): Revert bogus change. |
| |
| * gdb/remote.c (remote_fetch_registers): Don't warn about short |
| register packet if we've not set the expected value. |
| |
| * gdb/gdbserver/linux-low.c (linux_read_offsets): Remove debugging |
| printf. |
| |
| * gdb/gdbserver/Makefile.in (reg-cf.o, reg-cf.c): New targets. |
| * gdb/gdbserver/configure.srv (m68k*-*-uclinux*): New target. |
| * gdb/gdbserver/linux-low.c (linux_create_inferior): Use vfork on |
| mmuless systems. |
| (linux_resume_one_process): Remove extraneous cast. |
| (linux_read_offsets): New. |
| (linux_target_op): Add linux_read_offsets on mmuless systems. |
| * gdb/gdbserver/server.c (handle_query): Add qOffsets logic. |
| * gdb/gdbserver/target.h (struct target_ops): Add read_offsets. |
| |
| 2006-03-30 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/configure.ac: Add cygpath for mingw hosts. |
| * libiberty/configure: Rebuilt. |
| * libiberty/Makefile.in: Add cygpath. |
| * libiberty/cygpath.c: New. |
| |
| 2006-03-30 Paul Brook <paul@codesourcery.com> |
| |
| Backport form mainline. |
| * gdb/testsuite/gdb.mi/mi-until.exp: kfail broken until command. |
| * gdb/testsuite/gdb.mi/mi2-until.exp: Ditto. |
| |
| 2006-03-29 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gdb/m68k-tdep.c (M68K_FPREG_TYPE, M68K_LONG_DOUBLE_FORMAT, |
| M68K_RETURN_FP0): New. Set for Coldfire. |
| (m68k_register_type, m68k_register_to_value, |
| m68k_svr4_extract_return_value, m68k_svr4_store_return_value, |
| m68k_gdbarch_init): Use them. |
| |
| 2006-03-21 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/ser-mingw.c (net_windows_state): Add mutex. |
| (net_windows_select_thread): Grab lock around access to |
| read_event. |
| (net_windows_wait_handle): Do not reset the read_event. |
| (net_windows_open): Create a mutex. |
| (net_windows_read_prim): New function. |
| (_initialize_ser_windows): Use it. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/pex-common.c (pex_run): Close the write end of the |
| pipe after starting the child. |
| |
| * gdb/config/arm/armv7m.mt (TDEPFILES): Add prologue-value.o. |
| |
| 2006-03-21 Paul Brook <paul@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| Jim Blandy <jimb@codesourcery.com> |
| |
| * gdb/Makefile.in: Add prologue_value.{c,h} |
| * gdb/arm-tdep.c: Include prologue-value.h. |
| (thumb_skip_prologue): Remove. |
| (thumb_analyze_prologue): New function. |
| (arm_skip_prologue): Use thumb_analyze_prologue. |
| (thumb_scan_prologue): Ditto. |
| * gdb/prologue-value.c: New file. |
| * gdb/prologue-value.h: New file. |
| * gdb/config/arm/embed.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/config/arm/linux.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/config/arm/nbsd.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/config/arm/wince.mt (TDEPFILES): Add prologue-value.o. |
| * gdb/testsuite/gdb.arch/thumb-prologue.c: New file. |
| * gdb/testsuite/gdb.arch/thumb-prologue.exp: New file. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * configure.tgt (arm*-stellaris-*): Use armv7m configuration. |
| * config/arm/armv7m.mt: New file. |
| * config/arm/tm-armv7m.h: Likewise. |
| * arm-tdep.c (arm_register_name_strings): Use xPSR on ARM V7M. |
| (arm_pc_is_thumb): ARM V7M is always Thumb. |
| (set_disassembly_style): Use xPSR on ARM V7M. |
| (arm_write_pc): Do not set T bit in CSPR on V7M. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/pex-win32.c (<errno.h>): Include. |
| (fix_argv): Remove. |
| (argv_to_cmdline): New function. |
| (std_suffixes): New variable. |
| (no_suffixes): Likewise. |
| (find_executable): New function. |
| (win32_spawn): Likewise. |
| (spawn_script): Use win32_spawn instead of _spawnv[p]. |
| (pex_win32_exec_child): Replace MSVCRT calls with Win32 API calls. |
| (pex_win32_wait): Likewise. |
| |
| 2006-03-19 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/ser-mingw.c (free_pipe_state): Close pipe before calling |
| pex_free. |
| |
| 2006-03-17 Mark Mitchell <mark@codesourcery.com> |
| |
| * gdb/config/arm/embed.mt (TDEPFILES): Remove remote-rdp.o. |
| |
| 2006-03-17 Jim Blandy <jimb@codesourcery.com> |
| |
| Add support for 'target remote |' on MinGW. |
| * gdb/ser-mingw.c (struct pipe_state): New structure. |
| (make_pipe_state, free_pipe_state, cleanup_pipe_state) |
| (pipe_windows_open, pipe_windows_close, pipe_windows_read) |
| (pipe_windows_write, pipe_wait_handle): New functions. |
| (_initialize_ser_windows): Register a "pipe" interface based on |
| them. |
| |
| * libiberty/pex-common.c (pex_write_input): New function. |
| * libiberty/pexecute.txh (pex_write_input): Document it. |
| * libiberty/pex-common.h (struct pex_funcs): New function ptr fdopenw. |
| * libiberty/pex-unix.c (pex_unix_fdopenw): New function. |
| (funcs): List it as our fdopenw function. |
| * libiberty/pex-win32.c (pex_win32_fdopenw): New function. |
| (funcs): List it as our fdopenw function. |
| * libiberty/pex-djgpp.c (funcs): Leave fdopenw null. |
| * libiberty/pex-msdos (funcs): Same. |
| * libiberty/functions.texi: Regenerated. |
| |
| * include/libiberty.h (pex_write_input): New declaration. |
| |
| * libiberty/pex-common.h (struct pex_obj): Doc fixes. |
| |
| * libibery/functions.texi: Regenerate. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/gdb_proc_service.h (paddr_t): Use psaddr_t if available. |
| * gdb/proc-service.c (ps_xfer_memory): Cast paddr_t to unsigned |
| long. |
| (ps_pglobal_lookup): Cast CORE_ADDR to paddr_t. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/gdbserver/linux-mips-low.c: Include <sys/ptrace.h> and |
| "gdb_proc_service.h". |
| (PTRACE_GET_THREAD_AREA): Define. |
| (ps_get_thread_area): New function. |
| * gdb/gdbserver/Makefile.in (linux-i386-low.o, linux-mips-low.o) |
| (linux-x86-64-low.o): Update. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/gdbserver/configure.ac: Remove checks for prfpregset_t. |
| * gdb/gdbserver/gdb_proc_service.h: New file. |
| * gdb/gdbserver/linux-i386-low.c, gdb/gdbserver/linux-x86-64-low.c, |
| gdb/gdbserver/thread-db.c: Use the new "gdb_proc_service.h". |
| * gdb/gdbserver/proc-service.c: Likewise. |
| (ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t. |
| (ps_lgetfpregs, ps_lsetfpregs): Use a void* argument. |
| * gdb/gdbserver/Makefile.in (gdb_proc_service_h): Updated. |
| * gdb/gdbserver/configure, config.in: Regenerated. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/Makefile.in (mips_linux_tdep_h): New. |
| (mpis-linux-nat.o, mips-linux-tdep.o): Update. |
| * gdb/mips-linux-nat.c: Include "inferior.h", "mips-linux-tdep.h", and |
| <sys/ptrace.h>. |
| (have_ptrace_regsets, super_fetch_registers, super_store_registers) |
| (mips64_linux_regsets_fetch_registers) |
| (mips64_linux_regsets_store_registers, mips64_linux_fetch_registers) |
| (mips64_linux_store_registers): New. |
| (_initialize_mips_linux_nat): Override to_fetch_registers and |
| to_store_registers. |
| * gdb/mips-linux-tdep.h: New file. |
| * gdb/mips-linux-tdep.c: Include "mips-linux-tdep.c". |
| (ELF_NGREG, ELF_NFPREG, elf_greg_t, elf_gregset_t, elf_fpreg_t) |
| (elf_fpregset_t, FPR_BASE, PC, CAUSE, BADVADDR, MMHI, MMLO) |
| (FPC_CSR, FPC_EIR, EF_REG0, EF_REG31, EF_LO, EF_HI, EF_CP0_EPC) |
| (EF_CP0_BADVADDR, EF_CP0_STATUS, EF_CP0_CAUSE, EF_SIZE) |
| (MIPS64_ELF_NGREG, MIPS64_ELF_NFPREG, mips64_elf_greg_t) |
| (mips64_elf_gregset_t, mips64_elf_fpreg_t, mips64_elf_fpregset_t) |
| (MIPS64_FPR_BASE, MIPS64_PC, MIPS64_CAUSE, MIPS64_BADVADDR) |
| (MIPS64_MMHI, MIPS64_MMLO, MIPS64_FPC_CSR, MIPS64_FPC_EIR) |
| (MIPS64_EF_REG0, MIPS64_EF_REG31, MIPS64_EF_LO, MIPS64_EF_HI) |
| (MIPS64_EF_CP0_EPC, MIPS64_EF_CP0_BADVADDR, MIPS64_EF_CP0_STATUS) |
| (MIPS64_EF_CP0_CAUSE, MIPS64_EF_SIZE): Delete. |
| (supply_32bit_reg): Use gdb_byte. |
| (supply_64bit_reg): New. |
| (mips_supply_gregset, mips_fill_gregset, mips_supply_fpregset) |
| (mips_fill_fpregset, fetch_core_registers, supply_gregset) |
| (fill_gregset, supply_fpregset): Update for renamed types. |
| (mips64_supply_gregset): Use gdb_byte and supply_64bit_reg. |
| (mips64_fill_gregset): Make global. Handle 32-bit register |
| sizes. |
| (mips64_fill_fpregset): Make global. Use gdb_byte. Handle |
| FP regsets properly. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-linux-tdep.c (mips_supply_gregset): Renamed from supply_gregset. |
| (mips_fill_gregset): Renamed from fill_gregset. |
| (mips_supply_fpregset): Renamed from supply_fpregset. |
| (mips_fill_fpregset): Renamed from fill_fpregset. |
| (fetch_core_registers): Update calls. |
| (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): New |
| functions. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-tdep.c (mips_gdbarch_init): Default 64-bit ELF files to N64. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-tdep.c (is_mips16_addr, mips32_next_pc, add_offset_16): |
| Correct arithmetic for 64-bit CORE_ADDR. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-linux-tdep.c: Include "floatformat.h". |
| (mips_linux_init_abi): Use 128-bit long double for N32 and N64. |
| (mips_n32n64_return_value): Support 128-bit long double. |
| (print_gp_register_row): Don't print spaces before ignored |
| or floating point registers. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-mdebug-tdep.c (compare_pdr_entries): Use bfd_get_signed_32 |
| for code addresses. |
| (non_heuristic_proc_desc): Likewise. |
| |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdb/mips-linux-nat.c: Include "gdb_proc_service.h". |
| (PTRACE_GET_THREAD_AREA): Define. |
| (ps_get_thread_area): New. |
| * gdb/Makefile.in (mips-linux-nat.o): Update. |
| |
| 2006-03-08 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb/arm-tdep.c (arm_push_dummy_call): Remove stack alignment. |
| (arm_frame_align): New function. |
| (arm_gdbarch_init): Use it. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb/testsuite/gdb.base/assign.exp: Correct fail message. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * sim/arm/elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb/testsuite/lib/compiler.c: Extract armcc version number. |
| * gdb/testsuite/lib/compiler.cc: Ditto. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| 2006-03-03 Khem Raj <khem@mvista.com> |
| * remote-rdp.c (remote_rdp_xfer_inferior_memory): Use gdb_byte. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * gdb.arch/altivec-abi.exp: Use nowarnings instead of |
| additional_flags=-w. |
| * gdb.arch/altivec-regs.exp: Ditto. |
| * gdb.arch/e500-abi.exp: Ditto. |
| * gdb.arch/e500-regs.exp: Ditto. |
| * gdb.base/all-bin.exp: Ditto. |
| * gdb.base/annota1.exp: Ditto. |
| * gdb.base/annota3.exp: Ditto. |
| * gdb.base/args.exp: Ditto. |
| * gdb.base/arithmet.exp: Ditto. |
| * gdb.base/assign.exp: Ditto. |
| * gdb.base/async.exp: Ditto. |
| * gdb.base/bang.exp: Ditto. |
| * gdb.base/break.exp: Ditto. |
| * gdb.base/call-rt-st.exp: Ditto. |
| * gdb.base/completion.exp: Ditto. |
| * gdb.base/cond-expr.exp: Ditto. |
| * gdb.base/condbreak.exp: Ditto. |
| * gdb.base/consecutive.exp: Ditto. |
| * gdb.base/define.exp: Ditto. |
| * gdb.base/display.exp: Ditto. |
| * gdb.base/ena-dis-br.exp: Ditto. |
| * gdb.base/environ.exp: Ditto. |
| * gdb.base/eval-skip.exp: Ditto. |
| * gdb.base/info-proc.exp: Ditto. |
| * gdb.base/jump.exp: Ditto. |
| * gdb.base/logical.exp: Ditto. |
| * gdb.base/long_long.exp: Ditto. |
| * gdb.base/maint.exp: Ditto. |
| * gdb.base/miscexprs.exp: Ditto. |
| * gdb.base/pc-fp.exp: Ditto. |
| * gdb.base/pointers.exp: Ditto. |
| * gdb.base/relational.exp: Ditto. |
| * gdb.base/reread.exp: Ditto. |
| * gdb.base/sect-cmd.exp: Ditto. |
| * gdb.base/sep.exp: Ditto. |
| * gdb.base/sepdebug.exp: Ditto. |
| * gdb.base/until.exp: Ditto. |
| * gdb.base/whatis-exp.exp: Ditto. |
| * gdb.cp/annota2.exp: Ditto. |
| * gdb.cp/annota3.exp: Ditto. |
| * gdb.trace/actions.exp: Ditto. |
| * gdb.trace/backtrace.exp: Ditto. |
| * gdb.trace/circ.exp: Ditto. |
| * gdb.trace/collection.exp: Ditto. |
| * gdb.trace/deltrace.exp: Ditto. |
| * gdb.trace/infotrace.exp: Ditto. |
| * gdb.trace/limits.exp: Ditto. |
| * gdb.trace/packetlen.exp: Ditto. |
| * gdb.trace/passc-dyn.exp: Ditto. |
| * gdb.trace/passcount.exp: Ditto. |
| * gdb.trace/report.exp: Ditto. |
| * gdb.trace/save-trace.exp: Ditto. |
| * gdb.trace/tfind.exp: Ditto. |
| * gdb.trace/tracecmd.exp: Ditto. |
| * gdb.trace/while-dyn.exp: Ditto. |
| * gdb.trace/while-stepping.exp: Ditto. |
| * lib/gdb.exp: Ditto. |
| (gdb_compile): Handle nowarning option. |
| |