| 2011-12-29 Iain Sandoe <idsandoe@googlemail.com> |
| |
| * as.c (perform_an_assembly_pass): Do not create text, data and bss |
| sections for MACH-O. Do not switch to the text section. |
| * config/obj-macho.c (obj_mach_o_segT_from_bfd_name): Forward decl. |
| (mach_o_begin): Startup with only text section unless suppressed. |
| * config/obj-macho.h (obj_begin): define to mach_o_begin (). |
| |
| 2011-12-22 DJ Delorie <dj@redhat.com> |
| |
| * config/rl78-defs.h (rl78_linkrelax_addr16): Add. |
| (rl78_linkrelax_dsp, rl78_linkrelax_imm): Remove. |
| * config/rl78-parse.y: Tag all addr16 and branch patterns with |
| relaxation markers. |
| * config/tc-rl78.c (rl78_linkrelax_addr16): New. |
| (rl78_linkrelax_branch): New. |
| (OPTION_RELAX): New. |
| (md_longopts): Add relax option. |
| (md_parse_option): Add OPTION_RELAX. |
| (rl78_frag_init): Support relaxation. |
| (rl78_handle_align): New. |
| (md_assemble): Support relaxation. |
| (md_apply_fix): Likewise. |
| (md_convert_frag): Likewise. |
| * config/tc-rl78.h (MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| (HANDLE_ALIGN): New. |
| (rl78_handle_align): Declare. |
| |
| * config/rl78-parse.y (rl78_bit_insn): New. Set it for all bit |
| insn patterns. |
| (find_bit_index): New. Strip .BIT suffix off relevent |
| expressions for bit insns. |
| (rl78_lex): Exclude bit suffixes from expression parsing. |
| |
| 2011-12-21 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/13449 |
| * config/tc-arm.c (create_unwind_entry): Zero allocated table |
| entries. |
| |
| 2011-12-19 Iain Sandoe <idsandoe@googlemail.com> |
| |
| * config/obj-macho.c (obj_mach_o_section): Account for target- |
| dependent section types. Improve error handling when wrong section |
| types/attributes are specified. |
| |
| 2011-12-19 Chung-Lin Tang <cltang@codesourcery.com> |
| |
| * config/tc-mips.c (mips_pseudo_table): Add tprelword/tpreldword |
| entries. |
| (mips16_percent_op): Add MIPS16 TLS relocation ops. |
| (md_apply_fix): Add BFD_RELOC_MIPS16_TLS_* switch cases. |
| (s_tls_rel_directive): Rename from s_dtprel_internal(). Abstract out |
| directive string and reloc type as function parameters. Update |
| comments. |
| (s_dtprelword,s_dtpreldword): Change to use s_tls_rel_directive(). |
| (s_tprelword,s_tpreldword): New functions. |
| |
| 2011-12-15 Tristan Gingold <gingold@adacore.com> |
| |
| * config/obj-macho.c (obj_mach_o_fileprop): Fix typo. |
| |
| 2011-12-15 Konstantin Belousov <kib@FreeBSD.org> |
| |
| * config/obj-elf.c (obj_elf_type): Add ELFOSABI_FREEBSD to the |
| supported abi's. |
| |
| 2011-12-15 Iain Sandoe <iains@gcc.gnu.org> |
| |
| * config/obj-macho.c (obj_mach_o_subsections_by_symbols): New global. |
| (obj_mach_o_file_properties): New enum. |
| (obj_mach_o_subsections_via_symbols): Generalize name to... |
| ... (obj_mach_o_fileprop) and use to set subsections_via_symbols. |
| |
| 2011-12-14 Stuart Henderson <shenders@gcc.gnu.org> |
| |
| * config/bfin-parse.y (asm_1): set SRCx fields to all 1s for |
| dspalu32 instrs that don't use them. |
| |
| 2011-12-14 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-cris.c (md_convert_frag): Mark the length_code local |
| variable as unused as it is only used when ENABLE_CHECKING is on. |
| |
| 2011-12-14 Iain Sandoe <iains@gcc.gnu.org> |
| |
| * config/obj-macho.c: Add some more top-level comments. |
| (collect_16char_name): New. |
| (obj_mach_o_section): Amend to allow syntax compatible with |
| existing system tools. Use section translation data when available. |
| (obj_mach_o_segT_from_bfd_name): New. |
| (known_sections): Update. |
| (obj_mach_o_known_section): Use obj_mach_o_segT_from_bfd_name. |
| (objc_sections): New. |
| (obj_mach_o_objc_section): New. |
| (debug_sections): New. |
| (obj_mach_o_debug_section): New. |
| (tgt_sections): New. |
| (obj_mach_o_opt_tgt_section): New. |
| (obj_mach_o_base_section): New. |
| (obj_mach_o_common_parse): Update to create BSS on demand and to handle |
| lcomm optional alignment param. |
| (obj_mach_o_comm): Update parameter name. |
| (obj_mach_o_placeholder): New. |
| (mach_o_pseudo_table): Update for GCC section directives. |
| * config/obj-macho.h (_OBJ_MACH_O_H): New. |
| (USE_ALIGN_PTWO): Define. |
| (S_SET_ALIGN) Define. |
| |
| 2011-12-13 Andrew Burgess <aburgess@broadcom.com> |
| |
| * doc/internals.texi (TC_FORCE_RELOCATION_SUB_SAME): Update |
| to match code. |
| |
| 2011-12-08 Andrew Pinski <apinski@cavium.com> |
| Adam Nemet <anemet@caviumnetworks.com> |
| |
| * tc-mips.c (CPU_IS_OCTEON): Add Octeon2. |
| (mips_cpu_info_table): Add Octeon2. |
| * doc/c-mips.texi: Document octeon2 as an acceptable value for -march=. |
| |
| 2011-12-07 Sameera Deshpande <sameera.deshpande@arm.com> |
| |
| * config/tc-arm.c (do_t_ldstd): Warn for unpredictable cases. |
| |
| 2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| * config/tc-arm.c (ARM_IT_MAX_OPERANDS): New define. |
| (arm_it): Use ARM_IT_MAX_OPERANDS. |
| (neon_select_shape): Ensure we have matched all operands. |
| |
| 2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| * config/tc-arm.c (parse_neon_mov): Update which_operand |
| correctly. |
| |
| 2011-12-05 Richard Earnshaw <rearnsha@arm.com> |
| |
| * tc-arm.c (aeabi_set_public_attributes): Correctly set |
| Tag_ARM_ISA_use and Tag_Thumb_ISA_use. |
| |
| 2011-11-30 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| * config/tc-arm.c (arm_cpu_option_table): Add name_len field. |
| (arm_arch_option_table): Likewise. |
| (arm_option_extension_value_table): Likewise. |
| (ARM_CPU_OPT): New define. |
| (ARM_ARCH_OPT): Likewise. |
| (ARM_EXT_OPT): Likewise. |
| (arm_cpus): Use ARM_CPU_OPT to initialize. |
| (arm_archs): Use ARM_ARCH_OPT to initialize. |
| (arm_extensions): Use ARM_EXT_OPT to initialize. |
| (arm_parse_extension): Ensure option string matching matches |
| the whole string. |
| (arm_parse_cpu): Likewise. |
| (arm_parse_arch): Likewise. |
| |
| 2011-11-29 Andrew Pinski <apinski@cavium.com> |
| |
| * config/tc-mips.c (CPU_IS_OCTEON): New macro function. |
| (CPU_HAS_SEQ): Change to use CPU_IS_OCTEON. |
| (NO_ISA_COP): Likewise. |
| (macro) <ld_st>: Add support when off0 is true. |
| Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB. |
| (mips_cpu_info_table): Add octeon+. |
| * doc/c-mips.texi: Document octeon+ as an acceptable value for -march=. |
| |
| 2011-11-25 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| * config/tc-arm.c (do_t_mov_cmp): Allow MOV lowreg, lowreg when no CPU |
| is specified. |
| |
| 2011-11-23 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (s_alpha_prologue): Requires empty line. |
| |
| 2011-11-23 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (s_alpha_frame): Emit a warning if bad value |
| of RA. |
| (s_alpha_pdesc): Adjust comment. |
| |
| 2011-11-23 Thomas Klein <th.r.klein@web.de> |
| |
| * config/tc-arm.c (do_t_mov_cmp): Prevent emitting code for MOV |
| with two low register at arch v4t or v5t when assember using |
| unified syntax. |
| |
| 2011-11-21 DJ Delorie <dj@redhat.com> |
| |
| * config/rl78-defs.h (rl78_error): Add "const". |
| * config/rl78-parse.y (rl78_error): Likewise. |
| |
| 2011-11-21 Andreas Tobler <andreast@fgznet.ch> |
| |
| * config/tc-ppc.c (ppc_target_format): Add format for powerpc*-freebsd. |
| |
| 2011-11-16 David S. Miller <davem@davemloft.net> |
| |
| * config/tc-sparc.c (md_apply_fix): Handle BFD_RELOC_8. |
| |
| 2011-11-16 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (macro): Fix unsupported opcode message |
| capitalization. |
| (mips_ip, mips16_ip): Likewise. |
| |
| 2011-11-16 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (ISA_SUPPORTS_MCU_ASE): Also set if microMIPS |
| mode. |
| |
| 2011-11-16 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (macro_build_jalr): Reverse a negative |
| conditional. |
| (mips_ip): Likewise. |
| |
| 2011-11-16 Catherine Moore <clm@codesourcery.com> |
| Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Add "m14ke" and |
| "m14kec". |
| * doc/c-mips.texi (MIPS architecture options): Add "m14ke" and |
| "m14kec" to the list of -march options. |
| |
| 2011-11-15 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * write.c (dump_section_relocs): Don't convert PC-relative relocs |
| that have an in-place addend narrower than the addresses used. |
| |
| 2011-11-14 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (can_swap_branch_p): Exclude microMIPS |
| variant frags too. |
| |
| 2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add cortex-a7 entry. |
| * doc/c-arm.texi (ARM Options): Add cortex-a7 to list of accepted |
| CPUs. |
| |
| 2011-11-04 DJ Delorie <dj@redhat.com> |
| |
| * doc/c-rl78.texi (RL78-Float): Remove unused menu entry. |
| |
| 2011-11-02 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rl78.c (tc_gen_reloc): Remove unused variable. |
| |
| 2011-11-02 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (md_begin): Remove ARM_PLT32 reloc associated |
| with the (PLT) instruction suffix when operating in eabi mode. |
| * doc/c-arm.texi (ARM_Relocations): Extend description of (PLT) |
| suffix. |
| |
| 2011-11-01 DJ Delorie <dj@redhat.com> |
| |
| * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c. |
| (TARGET_CPU_HFILES): Add rc-rl78.h. |
| (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y. |
| (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules. |
| * Makefile.in: Regenerate. |
| * configure.in: Add rl78 case. |
| * configure: Regenerate. |
| * configure.tgt: Add rl78 case. |
| * config/rl78-defs.h: New file. |
| * config/rl78-parse.y: New file. |
| * config/tc-rl78.c: New file. |
| * config/tc-rl78.h: New file. |
| * NEWS: Add Renesas RL78. |
| |
| * doc/Makefile.am (c-rl78.texi): New. |
| * doc/Makefile.in: Likewise. |
| * doc/all.texi: Enable it. |
| * doc/as.texi: Add it. |
| * doc/c-rl78.texi: New file. |
| |
| 2011-10-28 Walter Lee <walt@tilera.com> |
| |
| * NEWS: Fix TILEPro capitalization. |
| * config/tc-tilegx.c (emit_tilegx_instruction) Handle |
| relocations of aliases. |
| * config/tc-tilepro.c: (emit_tilepro_instruction) Likewise. |
| |
| 2011-10-28 Nick Clifton <nickc@redhat.com> |
| |
| * po/ja.po: New Japanese translation. |
| * configure.in (ALL_LINGUAS): Add ja. |
| * configure: Regenerate. |
| |
| 2011-10-26 Joern Rennecke <joern.rennecke@embecosm.com> |
| |
| * doc/as.texinfo [EPIPHANY]: Include c-epiphany.texi to avoid |
| duplication. |
| |
| 2011-10-25 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/rx-defs.h (rx_error): Add const to first arg. |
| * config/rx-parse.y (rx_error): Likewise. |
| |
| 2011-10-25 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-ns32k.c (md_begin): Rename local variable 'stat' to |
| 'status'. |
| |
| 2011-10-25 Joern Rennecke <joern.rennecke@embecosm.com> |
| |
| * NEWS: Mention addition of Adapteva Epiphany support. |
| * config/tc-epiphany.c: New file. |
| * config/tc-epiphany.h: New file. |
| * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c . |
| (TARGET_CPU_HFILES): Add config/tc-epiphany.h . |
| * configure.in: Also set using_cgen for epiphany. |
| * configure.tgt: Handle epiphany. |
| * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi . |
| * doc/all.texi: Set EPIPHANY. |
| * doc/as.texinfo: Add EPIPHANY-specific text. |
| * doc/c-epiphany.texi: New file. |
| * po/gas.pot: Regenerate. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (move_register): Fix formatting. |
| |
| 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (can_swap_branch_p): Remove empty line. |
| (start_noreorder): Likewise. |
| |
| 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (s_option): Fix formatting. |
| (mips_elf_final_processing): Likewise. |
| |
| 2011-10-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (validate_micromips_insn): Fix formatting. |
| |
| 2011-10-24 David Binderman <dcb314@hotmail.com> |
| |
| * config/tc-mn10200.c (md_convert_frag): Add missing break. |
| |
| 2011-10-21 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (load_expression): Use symbol_mark_used accessor. |
| (s_alpha_comm): Use symbol_set_frag accessor. |
| |
| 2011-10-20 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-mips.c (micromips_add_label): Avoid gcc warning. |
| (md_convert_frag): Likewise. |
| |
| 2011-10-18 Jie Zhang <jie@codesourcery.com> |
| Julian Brown <julian@codesourcery.com> |
| |
| * config/tc-arm.c (parse_shifter_operand): Fix handling of explicit |
| rotation. |
| (encode_arm_shifter_operand): Likewise. |
| |
| 2011-10-13 James Greenhalgh <james.greenhalgh@arm.com> |
| |
| * config/tc-arm.c (check_ldr_r15_aligned): New. |
| (do_ldst): Warn in upredictable cases. |
| (do_t_ldst): Likewise. |
| (insns): Update accordingly. |
| |
| 2011-10-13 Alan Modra <amodra@gmail.com> |
| |
| * as.c (main): Define .gasversion. rather than __GAS_VERSION__. |
| * frags.h (bss_address_frag): Delete |
| (predefined_address_frag): New. |
| * frags.c (frag_init): Init predefined_address_frag. Delete ref |
| to bss_address_frag. |
| * symbols.c (S_CAN_BE_REDEFINED): New function. |
| * symbols.h (S_CAN_BE_REDEFINED): Declare. |
| * read.c (assign_symbol): Use S_CAN_BE_REDEFINED. |
| |
| 2011-10-12 Alan Modra <amodra@gmail.com> |
| |
| * symbols.c (local_symbol_make): Make global. |
| * symbols.h (local_symbol_make): Declare. |
| * as.c (main): Define __GAS_VERSION__. |
| |
| 2011-10-10 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| * po/fi.po: Updated Finnish translation. |
| * po/fr.po: Updated French translation. |
| |
| 2011-10-05 DJ Delorie <dj@redhat.com> |
| Nick Clifton <nickc@redhat.com> |
| |
| * config/rx-defs.h (rx_pid_register): New. |
| (rx_gp_register): New. |
| * config/rx-parse.y (rx_lex): Add support for %gpreg and %pidreg. |
| (displacement): Add PID support. |
| * config/tc-rx.c (rx_pid_mode): New. |
| (rx_num_int_regs): New. |
| (rx_pid_register): New. |
| (rx_gp_register): New. |
| (options): Add -mpid and -mint-register= options. |
| (md_longopts): Likewise. |
| (md_parse_option): Likewise. |
| (md_show_usage): Likewise. |
| (rx_pid_symbol): New. |
| (rx_pidreg_symbol): New. |
| (rx_gpreg_symbol): New. |
| (md_begin): Support PID. |
| (rx_validate_fix_sub): Support PID. |
| (tc_gen_reloc): Support PID. |
| * doc/c-rx.texi: Document PID support. |
| |
| 2011-09-27 Kai Tietz <ktietz@redhat.com> |
| |
| * config/obj-coff.c (obj_coff_section): Add 'e' as specifier |
| for marking section SEC_EXCLUDE. |
| |
| 2011-09-22 Tristan Gingold <gingold@adacore.com> |
| |
| * NEWS: Add marker for 2.22. |
| |
| 2011-09-21 David S. Miller <davem@davemloft.net> |
| |
| * config/tc-sparc.c (hwcap_allowed): New. |
| (struct sparc_arch): New field 'hwcap_allowed' containing a bitmask |
| of F_FOO flags which are enabled by the particular arch setting. |
| Add new options that provide explicit access to new instructions. |
| (md_parse_option): Only bump max_architecture if the requested one |
| is larger, or this is the first explicit request. |
| (get_hwcap_name): New function. |
| (sparc_ip): Validate that hwcaps used by an instruction have actually |
| been enabled. |
| * doc/c-sparc.texi: Document new sparc options. |
| |
| 2011-09-21 David S. Miller <davem@davemloft.net> |
| |
| * config/tc-sparc.c (hwcap_seen): New bitmask, defined when |
| not TE_SOLARIS. |
| (sparc_ip): When not TE_SOLARIS, accumulate hwcap bits from |
| sparc_opcode->flags of instruction into hwcap_seen. |
| (sparc_md_end): Create Tag_GNU_Sparc_HWCAPS attribute if |
| hwcap_seen is non-zero and not TE_SOLARIS. |
| |
| 2011-09-19 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (insert_operand): Call as_bad_value_out_of_range |
| instead of as_warn_out_of_range. |
| |
| 2011-09-08 Mark Fortescue <mark@mtfhpc.demon.co.uk> |
| |
| * config/tc-sparc.c (sparc_ip): Handle 'i' + r<0..31> |
| in addition to 'i' + [goli]<0..7>. |
| |
| 2011-09-08 Joern Rennecke <joern.rennecke@embecosm.com> |
| |
| * cgen.c (gas_cgen_pcrel_r_type): New function. |
| (gas_cgen_tc_gen_reloc): Check for GAS_CGEN_PCREL_R_TYPE. |
| * cgen.h (gas_cgen_pcrel_r_type): Declare. |
| |
| 2011-09-08 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| PR gas/13167 |
| * dwarf2dbg.c (dwarf2_flush_pending_lines): Use symbol_temp_new_now. |
| |
| 2011-09-05 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| PR gas/13024 |
| * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables. |
| (dwarf2_gen_line_info_1): Delete. |
| (dwarf2_push_line, dwarf2_flush_pending_lines): New functions. |
| (dwarf2_gen_line_info, dwarf2_emit_label): Use them. |
| (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines. |
| (dwarf2_directive_loc): Push previous .locs instead of generating |
| them immediately. |
| |
| 2011-08-26 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| |
| 2011-08-26 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (s_alpha_linkage): Simplify. Add comments. |
| |
| 2011-08-26 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (add_to_link_pool): Improve comment. |
| (s_alpha_fp_save): Fix indentation. |
| |
| 2011-08-19 Nick Clifton <nickc@redhat.com> |
| |
| * doc/as.texinfo: Include c-xstormy16.texi. |
| |
| 2011-08-18 Alan Modra <amodra@gmail.com> |
| |
| * write.c (resolve_reloc_expr_symbols): Convert local symbols |
| on relocs to section+offset. |
| (get_frag_for_reloc): New function. |
| (write_relocs): Merge sort fixup relocs with those from .reloc |
| directives. |
| |
| 2011-08-10 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (can_swap_branch_p): Update the comment on |
| MIPS16 fixups. |
| |
| 2011-08-09 Chao-ying Fu <fu@mips.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Add "m14k" and |
| "m14kc". |
| * doc/c-mips.texi (MIPS architecture options): Add "m14k" and |
| "m14kc" to the list of -march options. |
| |
| 2011-08-09 Chao-ying Fu <fu@mips.com> |
| Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (mips_set_options): Add ase_mcu. |
| (mips_opts): Initialise ase_mcu to -1. |
| (ISA_SUPPORTS_MCU_ASE): New macro. |
| (MIPS_CPU_ASE_MCU): Likewise. |
| (is_opcode_valid): Handle MCU. |
| (macro_build, macro): Likewise. |
| (validate_mips_insn, validate_micromips_insn): Likewise. |
| (mips_ip): Likewise. |
| (options): Add OPTION_MCU and OPTION_NO_MCU. |
| (md_longopts): Add mmcu and mno-mcu. |
| (md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU. |
| (mips_after_parse_args): Handle MCU. |
| (s_mipsset): Likewise. |
| (md_show_usage): Handle MCU options. |
| |
| * doc/as.texinfo: Document -mmcu and -mno-mcu options. |
| * doc/c-mips.texi: Likewise, and document ".set mcu" and |
| ".set nomcu" directives. |
| |
| 2011-08-09 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (gpr_mod_mask): Remove INSN2_MOD_GPR_MB, |
| INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG, |
| INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MM, |
| INSN2_MOD_GPR_MN, INSN2_MOD_GPR_MP and INSN2_MOD_GPR_MQ opcode |
| register use checks. |
| (gpr_read_mask): Add INSN2_READ_GPR_MC, INSN2_READ_GPR_ME |
| INSN2_READ_GPR_MG, INSN2_READ_GPR_MJ, INSN2_READ_GPR_MMN, |
| INSN2_READ_GPR_MP and INSN2_READ_GPR_MQ opcode register use |
| checks. |
| (gpr_write_mask): Replace INSN2_WRITE_GPR_S opcode register |
| use flag with INSN_WRITE_GPR_S. Add INSN2_WRITE_GPR_MB, |
| INSN2_WRITE_GPR_MHI, INSN2_WRITE_GPR_MJ and INSN2_WRITE_GPR_MP |
| opcode register use checks. |
| (can_swap_branch_p): Enable microMIPS branch swapping. |
| (append_insn): Likewise. |
| |
| 2011-08-09 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Remove forced 16-bit |
| branch size information. |
| (RELAX_MICROMIPS_U16BIT): Remove macro. |
| (RELAX_MICROMIPS_UNCOND): Adjust accordingly. |
| (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise. |
| (RELAX_MICROMIPS_RELAX32): Likewise. |
| (RELAX_MICROMIPS_TOOFAR16): Likewise. |
| (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise. |
| (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise. |
| (RELAX_MICROMIPS_TOOFAR32): Likewise. |
| (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise. |
| (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise. |
| (append_insn): Always check forced_insn_length for microMIPS |
| relaxation. Adjust code for the removal of |
| RELAX_MICROMIPS_U16BIT. |
| (mips_ip) <'D', 'E'>: If forced_insn_length, then emit the |
| relocation straight away. |
| (relaxed_micromips_16bit_branch_length): Adjust code for the |
| removal of RELAX_MICROMIPS_U16BIT. |
| |
| 2011-08-08 Tristan Gingold <gingold@adacore.com> |
| |
| * config/obj-macho.c (obj_mach_o_section): New function. |
| (struct known_section): New type. |
| (known_sections): Declare. |
| (obj_mach_o_known_section): New function. |
| (obj_mach_o_common_parse): Ditto. |
| (obj_mach_o_comm): Ditto. |
| (obj_mach_o_subsections_via_symbols): Ditto. |
| (mach_o_pseudo_table): Add new pseudos. |
| |
| 2011-08-06 Richard Henderson <rth@redhat.com> |
| |
| * dw2gencfi.c (all_fde_data): Export. |
| * dw2gencfi.h (all_fde_data): Declare. |
| * config/tc-alpha.c (alpha_elf_md_end): Don't convert legacy unwind |
| info to cfi unwind info if the user already has supplied some. |
| |
| 2011-08-06 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (emit_nop): Delete. |
| (get_delay_slot_nop): New function. |
| (nops_for_insn_or_target): Use it. |
| (append_insn): Likewise. When avoiding hazards, call add_fixed_insn |
| and insert_into_history directly. |
| |
| 2011-08-06 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (delayed_branch_p, compact_branch_p) |
| (uncond_branch_p, branch_likely_p): New functions. |
| (insns_between, nops_for_insn_or_target, append_insn) |
| (macro_start): Use them. |
| (get_append_method): Likewise. Remove redundant test. |
| |
| 2011-08-05 David S. Miller <davem@davemloft.net> |
| |
| * config/tc-sparc.c (v9a_asr_table): Add "cps". |
| (sparc_ip): Handle '4', '5' and '(' format codes. |
| |
| 2011-08-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/13056 |
| * output-file.c (output_file_close): Call bfd_cache_close_all |
| on error. |
| |
| * write.c (write_object_file): Revert the last change. |
| |
| 2011-08-04 Alan Modra <amodra@gmail.com> |
| |
| * write.c (write_object_file): Call set_symtab even if we had |
| errors. |
| |
| 2011-08-04 Tristan Gingold <gingold@adacore.com> |
| |
| * config/obj-elf.c (obj_elf_section): Do not free name. |
| |
| 2011-08-03 James Greenhalgh <james.greenhalgh@arm.com> |
| |
| * config/tc-arm.c (do_t_strexbh): New. |
| (insns): Update accordingly. |
| |
| 2011-08-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/13048 |
| * config/tc-i386.c (handle_quad): Removed. |
| (md_pseudo_table): Remove "quad". |
| (tc_gen_reloc): Don't check BFD_RELOC_64 for disallow_64bit_reloc. |
| (x86_dwarf2_addr_size): New. |
| |
| * config/tc-i386.h (x86_dwarf2_addr_size): New. |
| (DWARF2_ADDR_SIZE): Likewise. |
| |
| 2011-08-01 Nick Clifton <nickc@redhat.com> |
| |
| PR ld/12974 |
| * config/tc-arm.c (literal_pool): Add locs field. |
| (add_to_lit_pool): Initialise the locs entry for the new literal. |
| (s_ltorg): Generate a DWARF2 line number entry for each emitted |
| literal pool entry. |
| |
| 2011-08-01 Tristan Gingold <gingold@adacore.com> |
| |
| * write.c (write_relocs): Fix -Wshadow in DEBUG3 and DEBUG4. |
| |
| 2011-08-01 Tristan Gingold <gingold@adacore.com> |
| |
| * frags.c (frag_grow): Simplify the code. |
| |
| 2011-07-30 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (nops_for_vr4130): Revert previous commit. |
| |
| 2011-07-29 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c: Adjust comments throughout. |
| (reglist_lookup): Reshape code. |
| (jmp_reloc_p, jalr_reloc_p): Reformat. |
| (got16_reloc_p, hi16_reloc_p, lo16_reloc_p): Handle microMIPS |
| relocations. |
| (gpr_mod_mask): Remove unused variable. |
| (gpr_read_mask, gpr_write_mask): Reshape code. |
| (fpr_read_mask, fpr_write_mask): Likewise. |
| (nops_for_vr4130): Ensure non-microMIPS mode. |
| (can_swap_branch_p): Correct pinfo2 reference. Reshape code. |
| (append_insn): Skip Loongson 2F workaround in MIPS16 mode. Use |
| the outermost operator of a compound relocation to determines |
| the relocated field. Fix formatting. |
| (md_convert_frag): Reshape code. |
| |
| 2011-07-29 Tristan Gingold <gingold@adacore.com> |
| |
| * frags.c (frag_var_init): New function. |
| (frag_var): Call frag_var_init to initialize. |
| (frag_variant): Ditto. |
| |
| 2011-07-27 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * dwarf2dbg.c (out_debug_line): Ignore non-normal segments, with a |
| warning. |
| * doc/as.texinfo (Offset): Document .offset directive. |
| |
| 2011-07-27 Tristan Gingold <gingold@adacore.com> |
| |
| * frags.c (frag_grow): Revert previous patch. |
| |
| 2011-07-26 Kazuhiro Inaoka <kazuhiro.inaoka.ud@renesas.com> |
| |
| * config/tc-rx.c (md_convert_frag): Fix encoding of beq.a |
| synthetic instruction. |
| |
| 2011-07-25 Tristan Gingold <gingold@adacore.com> |
| |
| * frags.c (frag_grow): Simplify the code. |
| |
| 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> |
| Chao-ying Fu <fu@mips.com> |
| Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.h (mips_segment_info): Add one bit for |
| microMIPS. |
| (TC_LABEL_IS_LOCAL): New macro. |
| (mips_label_is_local): New prototype. |
| * config/tc-mips.c (S0, S7): New macros. |
| (emit_branch_likely_macro): New variable. |
| (mips_set_options): Add micromips. |
| (mips_opts): Initialise micromips to -1. |
| (file_ase_micromips): New variable. |
| (CPU_HAS_MICROMIPS): New macro. |
| (hilo_interlocks): Set for microMIPS too. |
| (gpr_interlocks): Likewise. |
| (cop_interlocks): Likewise. |
| (cop_mem_interlocks): Likewise. |
| (HAVE_CODE_COMPRESSION): New macro. |
| (micromips_op_hash): New variable. |
| (micromips_nop16_insn, micromips_nop32_insn): New variables. |
| (NOP_INSN): Handle microMIPS ASE. |
| (mips32_to_micromips_reg_b_map): New macro. |
| (mips32_to_micromips_reg_c_map): Likewise. |
| (mips32_to_micromips_reg_d_map): Likewise. |
| (mips32_to_micromips_reg_e_map): Likewise. |
| (mips32_to_micromips_reg_f_map): Likewise. |
| (mips32_to_micromips_reg_g_map): Likewise. |
| (mips32_to_micromips_reg_l_map): Likewise. |
| (mips32_to_micromips_reg_n_map): Likewise. |
| (mips32_to_micromips_reg_h_map): New variable. |
| (mips32_to_micromips_reg_m_map): Likewise. |
| (mips32_to_micromips_reg_q_map): Likewise. |
| (micromips_to_32_reg_h_map): New variable. |
| (micromips_to_32_reg_i_map): Likewise. |
| (micromips_to_32_reg_m_map): Likewise. |
| (micromips_to_32_reg_q_map): Likewise. |
| (micromips_to_32_reg_b_map): New macro. |
| (micromips_to_32_reg_c_map): Likewise. |
| (micromips_to_32_reg_d_map): Likewise. |
| (micromips_to_32_reg_e_map): Likewise. |
| (micromips_to_32_reg_f_map): Likewise. |
| (micromips_to_32_reg_g_map): Likewise. |
| (micromips_to_32_reg_l_map): Likewise. |
| (micromips_to_32_reg_n_map): Likewise. |
| (micromips_imm_b_map, micromips_imm_c_map): New macros. |
| (RELAX_DELAY_SLOT_16BIT): New macro. |
| (RELAX_DELAY_SLOT_SIZE_FIRST): Likewise. |
| (RELAX_DELAY_SLOT_SIZE_SECOND): Likewise. |
| (RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros. |
| (RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise. |
| (RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise. |
| (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise. |
| (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise. |
| (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise. |
| (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise. |
| (RELAX_MICROMIPS_TOOFAR32): Likewise. |
| (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise. |
| (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise. |
| (INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE. |
| (mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p, |
| fsize and insns. |
| (mips_mark_labels): New function. |
| (mips16_small, mips16_ext): Remove variables, replacing with... |
| (forced_insn_size): ... this. |
| (append_insn, mips16_ip): Update accordingly. |
| (micromips_insn_length): New function. |
| (insn_length): Return the length of microMIPS instructions. |
| (mips_record_mips16_mode): Rename to... |
| (mips_record_compressed_mode): ... this. Handle microMIPS ASE. |
| (install_insn): Handle microMIPS ASE. |
| (reglist_lookup): New function. |
| (is_size_valid, is_delay_slot_valid): Likewise. |
| (md_begin): Handle microMIPS ASE. |
| (md_assemble): Likewise. Update for append_insn interface change. |
| (micromips_reloc_p): New function. |
| (got16_reloc_p): Handle microMIPS ASE. |
| (hi16_reloc_p): Likewise. |
| (lo16_reloc_p): Likewise. |
| (jmp_reloc_p): New function. |
| (jalr_reloc_p): Likewise. |
| (matching_lo_reloc): Handle microMIPS ASE. |
| (insn_uses_reg, reg_needs_delay): Likewise. |
| (mips_move_labels): Likewise. |
| (mips16_mark_labels): Rename to... |
| (mips_compressed_mark_labels): ... this. Handle microMIPS ASE. |
| (gpr_mod_mask): New function. |
| (gpr_read_mask, gpr_write_mask): Handle microMIPS ASE. |
| (fpr_read_mask, fpr_write_mask): Likewise. |
| (insns_between, nops_for_vr4130, nops_for_insn): Likewise. |
| (fix_loongson2f_nop, fix_loongson2f_jump): Likewise. |
| (MICROMIPS_LABEL_CHAR): New macro. |
| (micromips_target_label, micromips_target_name): New variables. |
| (micromips_label_name, micromips_label_expr): New functions. |
| (micromips_label_inc, micromips_add_label): Likewise. |
| (mips_label_is_local): Likewise. |
| (micromips_map_reloc): Likewise. |
| (can_swap_branch_p): Handle microMIPS ASE. |
| (append_insn): Add expansionp argument. Handle microMIPS ASE. |
| (start_noreorder, end_noreorder): Handle microMIPS ASE. |
| (macro_start, macro_warning, macro_end): Likewise. |
| (brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables. |
| (mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise. |
| (BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros. |
| (MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise. |
| (macro_build): Handle microMIPS ASE. Update for append_insn |
| interface change. |
| (mips16_macro_build): Update for append_insn interface change. |
| (macro_build_jalr): Handle microMIPS ASE. |
| (macro_build_lui): Likewise. Simplify. |
| (load_register): Handle microMIPS ASE. |
| (load_address): Likewise. |
| (move_register): Likewise. |
| (macro_build_branch_likely): New function. |
| (macro_build_branch_ccl): Likewise. |
| (macro_build_branch_rs): Likewise. |
| (macro_build_branch_rsrt): Likewise. |
| (macro): Handle microMIPS ASE. |
| (validate_micromips_insn): New function. |
| (expr_const_in_range): Likewise. |
| (mips_ip): Handle microMIPS ASE. |
| (options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS. |
| (md_longopts): Add mmicromips and mno-micromips. |
| (md_parse_option): Handle OPTION_MICROMIPS and |
| OPTION_NO_MICROMIPS. |
| (mips_after_parse_args): Handle microMIPS ASE. |
| (md_pcrel_from): Handle microMIPS relocations. |
| (mips_force_relocation): Likewise. |
| (md_apply_fix): Likewise. |
| (mips_align): Handle microMIPS ASE. |
| (s_mipsset): Likewise. |
| (s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers. |
| (s_dtprel_internal): Likewise. |
| (s_gpword, s_gpdword): Likewise. |
| (s_insn): Handle microMIPS ASE. |
| (s_mips_stab): Likewise. |
| (relaxed_micromips_32bit_branch_length): New function. |
| (relaxed_micromips_16bit_branch_length): New function. |
| (md_estimate_size_before_relax): Handle microMIPS ASE. |
| (mips_fix_adjustable): Likewise. |
| (tc_gen_reloc): Handle microMIPS relocations. |
| (mips_relax_frag): Handle microMIPS ASE. |
| (md_convert_frag): Likewise. |
| (mips_frob_file_after_relocs): Likewise. |
| (mips_elf_final_processing): Likewise. |
| (mips_nop_opcode): Likewise. |
| (mips_handle_align): Likewise. |
| (md_show_usage): Handle microMIPS options. |
| * symbols.c (TC_LABEL_IS_LOCAL): New macro. |
| (S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check. |
| |
| * doc/as.texinfo (Target MIPS options): Add -mmicromips and |
| -mno-micromips. |
| (-mmicromips, -mno-micromips): New options. |
| * doc/c-mips.texi (-mmicromips, -mno-micromips): New options. |
| (MIPS ISA): Document .set micromips and .set nomicromips. |
| (MIPS insn): Update for microMIPS support. |
| |
| 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (mips_ip): Make a copy of the instruction's |
| mnemonic and use it for further processing. |
| |
| 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of |
| INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC |
| as well as explicit checks for ERET and DERET when scheduling |
| branch delay slots. |
| |
| 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add k1om. |
| (i386_align_code): Handle PROCESSOR_K1OM. |
| (check_cpu_arch_compatible): Check EM_K1OM. |
| (i386_arch): Handle Intel K1OM. |
| (i386_mach): Return bfd_mach_k1om for Intel K1OM. |
| (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel |
| K1OM. |
| |
| * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New. |
| (processor_type): Add PROCESSOR_K1OM. |
| |
| * doc/c-i386.texi: Document k1om. |
| |
| 2011-07-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * doc/c-i386.texi: Fix a typo. |
| |
| 2011-07-06 Aurelien Jarno <aurelien@aurel32.net> |
| |
| * config/tc-mips.c (append_insn): delete prev_pinfo2 and pinfo2. |
| |
| 2011-07-04 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (gpr_read_mask, gpr_write_mask): Fix handling |
| of register 0. |
| |
| 2011-07-04 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (append_insn): Make sure DWARF-2 location |
| information is properly adjusted for branches that get swapped. |
| |
| 2011-07-03 Samuel Thibault <samuel.thibault@gnu.org> |
| Thomas Schwinge <thomas@schwinge.name> |
| |
| PR binutils/12913 |
| * config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of |
| ELFOSABI_LINUX alias. |
| * config/tc-ia64.c: Likewise. |
| |
| 2011-06-30 Paul Carroll <pcarroll@codesourcery.com> |
| |
| * config/tc-arm.c (do_t_add_sub): Only allow LSL shifts of less |
| than 4 in Thumb mode. |
| |
| 2011-06-30 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12848 |
| * config/tc-arm.c (BAD_RANGE): New error message define. |
| (md_apply_fix): Use it. |
| Fix range check for thumb branch instructions. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (append_method): New enum. |
| (can_swap_branch_p, get_append_method): New functions. |
| (append_insn): Use get_append_method to decide how the instruction |
| should be added. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (append_insn): Remove bogus goto. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (append_insn): Always clear the history after an |
| unconditional branch. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (find_altered_mips16_opcode): New function. |
| (append_insn): Use it. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (insn_uses_reg): Delete. |
| (gpr_read_mask, gpr_write_mask): New functions. |
| (fpr_read_mask, fpr_write_mask): Likewise. |
| (insns_between, nops_for_vr4130, append_insn): Use them. |
| |
| 2011-06-29 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (md_mips_end): Call mips_emit_delays. |
| |
| 2011-06-29 Dave Martin <dave.martin@linaro.org> |
| |
| PR gas/12931 |
| * config/tc-arm.c (mapping_state): When changing to ARM or THUMB |
| state set the minimum required alignment of the section. |
| |
| 2011-06-29 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-i386.c (i386_mach): Convert to ISO-C. |
| (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto. |
| (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto. |
| (md_section_align, tc_gen_reloc): Ditto. |
| |
| 2011-06-28 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not |
| generate dummy fix. |
| |
| 2011-06-28 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc. |
| (emit_jsrjmp): Ditto. |
| (tc_gen_reloc): Ditto. |
| |
| 2011-06-28 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (alpha_evax_proc_hash): Remove. |
| (alpha_evax_proc_data): New variable. |
| (s_alpha_ent): Prevent nested function. Remove has_insert call. |
| (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of |
| error. Do not search in the hash table. Check if match with .ent. |
| (s_alpha_name): Remove unused variable. |
| (md_begin): Remove initialization of alpha_evax_proc_hash. |
| |
| 2011-06-27 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter. |
| Locally declare basesym. Add comments. Do not set literal_pool_size. |
| (load_expression): Adjust call to add_to_link_pool. |
| (s_alpha_pdesc): Define pdesc symbol using dot. |
| Do not set literal_pool_size. |
| (s_alpha_end): Use NULL instead of 0. |
| |
| 2011-06-27 Tristan Gingold <gingold@adacore.com> |
| |
| * config/obj-evax.c (evax_frob_file_before_adjust): Add comments. |
| Fix style. |
| * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg |
| field. Add comments. |
| (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove |
| |
| 2011-06-26 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (fix_24k_record_store_info): If the previous |
| instruction was a store, and the next instructions are unknown, |
| assume the worst. |
| |
| 2011-06-25 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| PR gas/12915 |
| * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn) |
| (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters. |
| (mips_emit_delays, start_noreorder): Update accordingly. |
| (append_insn): Likewise. Revert original fix for this PR |
| and use the ignore parameter instead. |
| |
| 2011-06-24 Tristan Gingold <gingold@adacore.com> |
| |
| PR gas/11625 |
| * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort. |
| |
| 2011-06-24 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-alpha.c (add_to_link_pool): Remove useless offset |
| variable. Fix style. |
| |
| 2011-06-23 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| PR gas/12915 |
| * config/tc-mips.c (append_insn): Only consider hazards between the |
| pre-noreorder block and ip. |
| |
| 2011-06-21 Sameera Deshpande <sameera.deshpande@arm.com> |
| |
| * config/tc-arm.c (vfp_conv): Add check on range of immediate operand |
| in vcvt instruction between floating-point and fixed-point. |
| (operand_parse_code): Add "OP_oI32z". |
| (parse_operands): OP_oI32z case added. |
| |
| 2011-06-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.tgt: Revert x32 change. |
| |
| 2011-06-20 Nick Clifton <nickc@redhat.com> |
| |
| * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi. |
| * doc/Makefile.in: Regenerate. |
| * doc/all.texi: Set XSTORMY16. |
| * doc/c-xstormy16.texi: New file. |
| |
| 2011-06-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.tgt: Support x32. |
| |
| 2011-06-15 Nick Clifton <nickc@redhat.com> |
| |
| * NEWS: Mention addition of TILEPRO and TIKE-Gx support. |
| |
| 2011-06-14 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within. |
| (tc_new_dot_label): Define. |
| (ppc_new_dot_label): Declare. |
| * config/tc-ppc.c (ppc_frob_label): Set within target field. |
| (ppc_fix_adjustable): Use this field to adjust the reloc. |
| (ppc_new_dot_label): New function. |
| |
| 2011-06-14 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2011-06-13 Walter Lee <walt@tilera.com> |
| |
| * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and |
| config/tc-tilepro.c. |
| (TARGET_CPU_HFILES): Add config/tc-tilegx.h and |
| config/tc-tilepro.h. |
| * Makefile.in: Regenerate. |
| * configure.tgt (tilepro-*-*): New. |
| (tilegx-*-*): Likewise. |
| * config/tc-tilegx.c: New file. |
| * config/tc-tilegx.h: Likewise. |
| * config/tc-tilepro.h: Likewise. |
| * config/tc-tilepro.c: Likewise. |
| * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and |
| c-tilepro.texi. |
| * doc/Makefile.in: Regenerate. |
| * doc/all.texi (TILEGX): Define. |
| (TILEPRO): Define. |
| * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include |
| c-tilegx.texi and c-tilepro.texi. |
| * doc/c-tilegx.texi: New. |
| * doc/c-tilepro.texi: New. |
| |
| 2011-06-13 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12854 |
| * config/tc-arm.c (do_shift): Do not allow shift operations at the |
| end of a register based shift insn. |
| (do_t_shift): Likewise. |
| |
| 2011-06-13 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-score.c (s3_my_get_expression): Delete unused local |
| variable 'seg'. |
| (s3_do_ldst_insn): Delete unused local variable 'strbak'. |
| (s3_do16_ldst_insn): Delete unused local variable 'temp'. |
| (s3_do_macro_bcmp): Zero inst_expand array. |
| (s3_do_macro_bcmpz): Likewise. |
| (s3_s_score_end): Delete unused local variable 'dot'. |
| (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'. |
| * config/tc-score7.c (s7_my_get_expression): Delete unused local |
| variable 'seg'. |
| (s7_do_ldst_insn): Delete unused local variable 'strbak'. |
| (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and |
| 'r_new'. |
| (s7_s_score_end): Delete unused local variable 'dot'. |
| (s7_relax_frag): Delete unused local variable 'relax_size'. |
| (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'. |
| |
| 2011-06-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| AVX Programming Reference (June, 2011) |
| * config/tc-i386.c (i386_error): Add invalid_vsib_address and |
| unsupported_vector_index_register. |
| (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid. |
| (check_VecOperands): New. |
| (match_template): Call check_VecOperands. Handle |
| invalid_vsib_address and unsupported_vector_index_register. |
| (build_modrm_byte): Support VecSIB. Check register-only source |
| operand when two source operands are swapped. |
| (i386_index_check): Allow Xmm/Ymm index registers. |
| |
| * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt |
| and invpcid./invpcid. |
| |
| 2011-06-09 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12861 |
| * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable |
| code. |
| (check_cinv_options): Remove unused local variables. Make |
| function void. |
| (md_assemble): Remove unused local variable. |
| |
| 2011-06-09 James Greenhalgh <james.greenhalgh@arm.com> |
| |
| * config/tc-arm.c (do_ldrd): Warn in unpredictable cases. |
| |
| 2011-06-03 Arnaud Patard <arnaud.patard@rtp-net.org> |
| |
| PR gas/12698 |
| * config/tc-arm.c (parse_psr): Set m_profile to false when |
| assembling for any architecture. |
| |
| 2011-06-02 Jie Zhang jie@codesourcery.com |
| Nathan Sidwell nathan@codesourcery.com |
| |
| * config/tc-arm.c (parse_address_main): Handle -0 offsets. |
| (encode_arm_addr_mode_2): Set default sign of zero here ... |
| (encode_arm_addr_mode_3): ... and here. |
| (encode_arm_cp_address): ... and here. |
| (md_apply_fix): Use default sign of zero here. |
| |
| 2011-06-02 Nick Clifton <nickc@redhat.com> |
| |
| * as.c: Fix spelling typo. |
| * read.c: Likewise. |
| * config/tc-ppc.c: Likewise. |
| * po/gas.pit: Regenerate. |
| |
| 2011-05-31 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (arm_cpus): Add Cortex-R5. |
| (arm_extensions): Allow idiv on ARMv7-R. |
| * doc/c-arm.text: Update idiv extension restrictions. |
| |
| 2011-05-31 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative |
| loads. |
| |
| 2011-05-31 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant |
| addresses. |
| |
| 2011-05-31 Paul Brook <paul@codesourcery.com> |
| Nathan Sidwell <nathan@codesourcery.com> |
| |
| * config/tc-arm.c (fix_new_arm): Create an absolute symbol for |
| pc-relative fixes to constants. |
| * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define. |
| |
| 2011-05-27 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-s390.c (md_begin): Remove unused variable dup_insn. |
| |
| 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * config/tc-s390.c (md_gather_operands): Fix check for floating |
| register pair operands. |
| |
| 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * config/tc-s390.c (md_gather_operands): Emit an error for odd |
| numbered registers used as register pair operand. |
| |
| 2011-05-23 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-v850.h (TC_FX_SIZE_SLACK): Define. |
| |
| 2011-05-20 Bernd Schmidt <bernds@codesourcery.com> |
| |
| * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset". |
| (tic6x_parse_name): Handle it. |
| (tic6x_fix_new_exp): Handle O_pcr_offset. |
| (tic6x_fix_adjustable): Return 0 for the new relocs. |
| (md_apply_fix): Handle them. |
| (tc_gen_reloc): Likewise. |
| * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member. |
| |
| 2011-05-18 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12754 |
| * config/tc-tic30.c (ordinal_names): Allow translation of the |
| ordinal names. |
| |
| 2011-05-18 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (s_unreq): Reword warning message to make it |
| easier to translate. |
| * config/tc-ia64.c (md_show_usage): Add note for translators. |
| * configure.in (ALL_LINGUAS): Add "fi". |
| * configure: Regenerate. |
| |
| 2011-05-18 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-ppc.h (ppc_tc_sy): Reorder fields. |
| Put size into an union with dw. |
| (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust. |
| (ppc_xcoff_end): Declare. |
| (md_end): Define. |
| * config/tc-ppc.c: Add includes for xcoff. |
| (ppc_dwsect): New function. |
| (md_pseudo_table): Add dwsect. |
| (struct dw_subsection): New. |
| (dw_sections): New. |
| (ppc_change_debug_section): New function. |
| (ppc_xcoff_end): Ditto. |
| (ppc_function): Adjust for ppc_tc_sy. |
| (ppc_symbol_new_hook): Ditto. |
| (ppc_frob_symbol): Ditto. |
| (ppc_frob_section): Do not set vma for debug sections. |
| (ppc_fix_adjustable): Return true for debug sections. |
| * config/obj-coff.c: Add includes for xcoff. |
| (coff_frob_section): Handle dwarf section. |
| |
| 2011-05-17 Nick Clifton <nickc@redhat.com> |
| |
| * po/fi.po: New Finnish translation. |
| * po/fr.po: Updated French translation. |
| |
| * config/tc-m32r.c (md_show_usage): Fix typos in descriptions. |
| * config/tc-mt.c (md_assemble): Fix typos in warning messages. |
| * cond.c (s_else): Fix typos in error messages. |
| * config/tc-pj.c (md_assemble): Fix typo in error message. |
| |
| 2011-05-16 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not |
| emitting ELF object. |
| (md_show_usage): Only mention --pic if the assembler can generate |
| ELF objects. |
| * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a |
| prerequisite for --pic being a valid option. |
| |
| 2011-05-13 Frederic Marchal <fmarchal@perso.be> |
| |
| PR gas/12755 |
| * config/tc-v850.c (parse_register_list): Correct error string. |
| |
| 2011-05-12 Quentin Neill <quentin.neill@amd.com> |
| |
| * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD. |
| (i386_align_code): Ditto |
| |
| 2011-05-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| PR gas/12715 |
| * config/tc-arm.c (parse_big_immediate): Fix parsing of 64-bit |
| immediates on 32-bit hosts. |
| |
| 2011-05-10 Quentin Neill <quentin.neill@amd.com> |
| |
| * config/tc-i386.c (cpu_arch): Add bdver2 and rename |
| PROCESSOR_BDVER1 to PROCESSOR_BDVER. |
| (i386_align_code): Rename PROCESSOR_BDVER1. |
| (processor_type): Ditto. |
| * doc/c-i386.texi: Add bdver2. |
| |
| 2011-05-10 Alan Modra <amodra@gmail.com> |
| |
| * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error. |
| |
| 2011-05-09 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-tic6x.c (streq): Define. |
| (tic6x_get_unwind): New. |
| (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp, |
| s_tic6x_personalityindex, s_tic6x_personality): New functions. |
| (md_pseudo_table): Add "endp", "handlerdata", "personalityindex", |
| "personality" and "cantunwind". |
| (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions, |
| tic6x_start_unwind_section, tic6x_unwind_frame_regs, |
| tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big, |
| tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word, |
| tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb, |
| tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding, |
| tic6x_cfi_endproc): New. |
| * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define. |
| (tic6x_unwind_info): New. |
| (tic6x_segment_info_type): Add marked_pr_dependency, unwind and |
| text_unwind. |
| (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum, |
| tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN, |
| DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc, |
| tc_cfi_section_name): Define. |
| * doc/c-tic6x.texi: Document new unwinding directives. |
| * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default |
| definitions. |
| (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column, |
| CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr): |
| Move to dw2gencfi.h. |
| (CFI_EMIT_target): Define. |
| (dot_cfi_sections): Check tc_cfi_section_name. |
| (dot_cfi_startproc): Use tc_cfi_startproc. |
| (dot_cfi_endproc): Use tc_cfi_endproc. |
| * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, |
| CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame, |
| CFI_val_encoded_addr): Move to here from dw2gencfi.c. |
| |
| 2011-05-07 Alan Modra <amodra@gmail.com> |
| |
| * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define. |
| Use throughout in place of #if SUPPORT_FRAME_LINKONCE. |
| (struct fde_entry): Rename cseg to cur_seg. |
| (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED. |
| (get_cfi_seg): Likewise. Use if (SUPPORT_FRAME_LINKONCE) rather |
| that #if SUPPORT_FRAME_LINKONCE. |
| (cfi_finish): Likewise. |
| |
| 2011-05-06 Tristan Gingold <gingold@adacore.com> |
| |
| * read.c (s_comm_internal): Remove code for OBJ_VMS. |
| (s_data): Ditto. |
| (s_text): Ditto. |
| * write.c (write_object_file): Ditto. |
| * symbols.c (define_sym_at_dot): Ditto. |
| (colon): Ditto. |
| |
| 2011-05-05 Alan Modra <amodra@gmail.com> |
| |
| * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define. Use throughout |
| file to conditionally compile code added 2011-04-26. |
| (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used |
| when SUPPORT_FRAME_LINKONCE. |
| (get_cfi_seg): Likewise. Reintroduce old code for when not |
| SUPPORT_FRAME_LINKONCE. |
| (cfi_finish): Move get_cfi_seg calls out of loop when not |
| SUPPORT_FRAME_LINKONCE. Avoid unused var warning. |
| |
| 2011-05-03 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-tic6x.c (s_ehtype): New function. |
| (md_pseudo_table): Add "ehtype". |
| (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE. |
| * doc/c-tic6x.texi: Document .ehtype directive. |
| |
| 2011-04-26 Kai Tietz <ktietz@redhat.com> |
| |
| * dw2gencfi.c (dwcfi_seg_list): New struct. |
| (dwcfi_hash): New static hash variable. |
| (get_debugseg_name): New. |
| (alloc_debugseg_item): New. |
| (make_debug_seg): New. |
| (dwcfi_hash_insert): New. |
| (dwcfi_hash_find): New. |
| (dwcfi_hash_find_or_make): New. |
| (cfi_insn_data): New member cur_seg. |
| (cie_entry): Likewise. |
| (fde_entry): New cseg and handled members. |
| (alloc_fde_entry): Initialize cseg member. |
| (alloc_cfi_insn_data): Initialize cur_seg member. |
| (dot_cfi_sections): Compare for beginning of |
| section names via strncmp. |
| (get_cfi_seg): New. |
| (cfi_finish): Treat link-once sections. |
| (is_now_linkonce_segment): New local helper. |
| (output_cie): Ignore cie entries not member of current |
| segment. |
| (output_fde): Likewise. |
| (select_cie_for_fde): Likewise. |
| (cfi_change_reg_numbers): Add new argument for current segment |
| and ignore insn elements, if not part of current segment. |
| * ehopt.c (get_cie_info): Use strncmp for |
| section name matching. |
| (heck_eh_frame): Likewise. |
| |
| 2011-04-20 Catherine Moore <clm@codesourcery.com> |
| David Ung <davidu@mips.com> |
| |
| * config/mips.c (mips_cl_insn): Add new field complete_p. |
| (create_insn): Initialize complete_p to zero. |
| (BASE_REG_EQ): New. |
| (fix_24k_align_to): New. |
| (fix_24k_store_info): Declare. |
| (fix_24k_sort): New. |
| (fix_24k_record_store_info): New. |
| (nops_for_24k): New. |
| (nops_for_insn): Call nops_for_24k. |
| (append_insn): Move O_constant expression handling. |
| |
| 2011-04-20 Alan Modra <amodra@gmail.com> |
| |
| * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size. |
| (hash_new_sized): New function, split out from.. |
| (hash_new): ..here. |
| |
| 2011-04-19 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (v7m_psrs): Revert previous delta. |
| |
| 2011-04-18 Julian Brown <julian@codesourcery.com> |
| Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to |
| detect M-profile targets. |
| (do_t_swi): Exclude v7 and higher variants from arm_ext_os test. |
| (v7m_psrs): Fix typo: basepri_max should be basepri_mask. |
| |
| 2011-04-14 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * config/tc-s390.c (s390_machine): New prototype. |
| (md_pseudo_table): New pseudo-op .machine. |
| (s390_opcode_hash): Initialize to NULL. |
| (s390_parse_cpu): New function. |
| (md_parse_option): Use s390_parse_cpu. |
| (s390_setup_opcodes): New function. |
| (md_begin): Use s390_setup_opcodes. |
| (s390_machine): New hook handling the new .machine pseudo. |
| |
| * doc/c-s390.texi: Document the new pseudo op .machine. |
| |
| 2011-04-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (i386_mach): Start error message with lower |
| case. |
| (md_begin): Likewise. |
| (md_parse_option): Likewise. |
| (i386_target_format): Likewise. |
| (check_byte_reg): Likewise. |
| (check_long_reg): Likewise. |
| (check_qword_reg): Likewise. |
| (check_word_reg): Likewise. |
| |
| 2011-04-12 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12532 |
| * config/tc-arm.c (relax_branch): Do not relax branches to |
| preemptable global symbols. |
| |
| 2011-04-11 Julian Brown <julian@codesourcery.com> |
| |
| * config/tc-arm.c (parse_psr): Add LHS argument. Improve support |
| for *APSR bitmasks. |
| (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR. |
| Remove OP_RVC_PSR. |
| (parse_operands): Likewise. |
| (do_mrs): Tweak error message for constraint. |
| (do_t_mrs): Update constraints for changes to APSR support. |
| (do_t_msr): Likewise. Don't set PSR_f flag here. |
| (psrs): Remove "g", "nzcvq", "nzcvqg". |
| (insns): Tweak entries for msr and mrs instructions. |
| |
| 2011-04-11 Kai Tietz <ktietz@redhat.com> |
| |
| * config/tc-i386.c (x86_cons): Initialize adjust with zero. |
| |
| 2011-04-11 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-i386.c (x86_cons): Define even for non-ELF targets. |
| * config/tc-i386.h (x86_cons): Always prototype. |
| |
| * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter |
| in order to avoid a compile time warning. |
| (getprocreg_image): Likewise. |
| |
| 2011-04-11 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-cr16.c (getprocreg_image): Correct range check. |
| (getprocregp_image): Likewise. |
| |
| 2011-04-06 Joseph Myers <joseph@codesourcery.com> |
| |
| * configure.tgt (strongarm*be, strongarm*b, strongarm*, |
| xscale*be|xscale*b, xscale*): Remove architectures. |
| (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe, |
| thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets. |
| |
| 2011-04-01 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning. |
| |
| 2011-03-31 Bernd Schmidt <bernds@codesourcery.com> |
| |
| * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New |
| static variables. |
| (md_begin): Initialize them. |
| (s_tic6x_scomm): New static function. |
| (md_pseudo_table): Add "scomm". |
| (tc_gen_reloc): Really undo all adjustments made by |
| bfd_install_relocation. |
| * doc/c-tic6x.texi: Document the .scomm directive. |
| |
| 2011-03-31 Tristan Gingold <gingold@adacore.com> |
| |
| * dwarf2dbg.c (DWARF2_VERSION): Define. |
| (out_debug_line): Use it. |
| (out_debug_aranges): Ditto. |
| (out_debug_info): Ditto. |
| * config/tc-ia64.h (DWARF2_VERSION): Override it. |
| |
| 2011-03-30 Michael Snyder <msnyder@vmware.com> |
| |
| * obj-elf.c (obj_elf_section): Free malloced name. |
| * macro.c (get_any_string): Free malloced br_buf. |
| (do_formals): Free 'formal'. |
| |
| 2011-03-30 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value |
| to offset only if within is set. |
| (ppc_stabx): Reformat. For stsym stabs, add a check and set |
| within only for symbols. |
| |
| 2011-03-29 Richard Henderson <rth@redhat.com> |
| |
| PR 12610 |
| * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous |
| label; zap alpha_insn_label. |
| |
| 2011-03-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (handle_quad): Properly handle multiple |
| operands. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest |
| reg $2 is the same as dest reg $4. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest |
| reg $2 is the same as dest reg $4. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest |
| reg $2 is the same as dest reg $4. |
| |
| 2011-03-28 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (16bit acc add): Return yyerror when dest |
| reg $1 is the same as dest reg $7. |
| |
| 2011-03-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (handle_quad): New. |
| (md_pseudo_table): Add "quad". |
| |
| 2011-03-26 John Marino <binutils@marino.st> |
| |
| * configure.tgt: Fix support for *-*-dragonfly*. |
| * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly. |
| * config/te-dragonfly.h: New file. |
| |
| 2011-03-24 Eric B. Weddington <eric.weddington@atmel.com> |
| |
| * config/tc-avr.c (mcu_types): Add new devices: atmega325pa, |
| atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb, |
| at90pwm161. |
| * doc/c-avr.texi: Document new device names. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest |
| reg $1 is the same as dest reg $7. |
| (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as |
| dest reg $7. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (check_macfuncs): Clarify error message when |
| P is mismatched. Check destination regno are off by one when P is |
| set, or are equal when P is not set. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is |
| the same as dest reg $4. |
| (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5. |
| |
| 2011-03-23 Eric B. Weddington <eric.weddington@atmel.com> |
| |
| * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u, |
| atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu. |
| * doc/c-avr.texi: Document new device names. |
| |
| 2011-03-22 Eric B. Weddington <eric.weddington@atmel.com> |
| |
| * config/tc-avr.c (struct avr_opcodes_s): Add opcode field. |
| (AVR_INSN): Change definition to match. |
| (avr_opcodes): Likewise, change to match. |
| (mcu_types): Add XMEGA architecture names and new XMEGA device names. |
| (md_show_usage): Add XMEGA architecture names. |
| (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices. |
| Add support for SPM Z+ instruction. |
| * doc/c-avr.texi: Add documentation for XMEGA architectures and |
| devices. |
| |
| 2011-03-21 Eric B. Weddington <eric.weddington@atmel.com> |
| |
| * config/tc-avr.c (md_show_usage): Add "Assembler" text to output. |
| |
| 2011-03-18 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol |
| on .size expression errors rather than symbols in the size expression. |
| |
| 2011-03-18 Alan Modra <amodra@gmail.com> |
| |
| * input-scrub.c (line_numberT): Delete. |
| (input_scrub_close): Reset line counters. |
| * messages.c (as_show_where): Don't print invalid line number. |
| (as_warn_internal, as_bad_internal): Likewise. |
| |
| 2011-03-18 Alan Modra <amodra@gmail.com> |
| |
| * read.c (read_a_source_file): Remove md_after_pass_hook. |
| Move "quit" label before set of dot_symbol. |
| * config/tc-d10v.h (md_after_pass_hook): Don't define. |
| * config/tc-d30v.h (md_after_pass_hook): Likewise. |
| * config/tc-m32r.h (md_after_pass_hook): Likewise. |
| (md_cleanup): Define to call m32r_fill_insn. |
| |
| 2011-03-18 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| |
| * config/tc-s390.c (md_parse_option): Add -march=all option which |
| switches to the highest available CPU. |
| |
| 2011-03-17 Alan Modra <amodra@gmail.com> |
| |
| PR 12569 |
| * expr.c (operand): Correct passing of "mode" to expr. |
| * read.c (do_org): Allow expr_section. |
| (get_known_segmented_expression): Don't assert anything about the |
| segment. |
| |
| 2011-03-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * as.c (show_usage): Add --size-check=. |
| (parse_args): Add and handle OPTION_SIZE_CHECK. |
| |
| * as.h (flag_size_check): New. |
| |
| * config/obj-elf.c (elf_frob_symbol): Use as_bad to report |
| bad .size directive only for --size-check=error. |
| |
| * doc/as.texinfo: Document --size-check=. |
| |
| 2011-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for |
| bf542/bf544/bf547/bf548/bf549. |
| |
| 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org> |
| |
| * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to |
| determine whether a relocation is needed. |
| (md_apply_fix, arm_apply_sym_value): Likewise. |
| |
| 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org> |
| |
| * config/tc-arm.c (arm_adjust_symtab): Set the branch type |
| for Thumb symbols. |
| |
| 2011-03-11 Nick Clifton <nickc@redhat.com> |
| |
| * remap.c (remap_debug_filename): Always allocate a buffer for the |
| returned pointer. |
| * stabs.c (stabs_generate_asm_file): Free the pointer returned by |
| remap_debug_filename. |
| |
| 2011-03-10 Michael Snyder <msnyder@vmware.com> |
| |
| Revert the following change: |
| * dwarf2dbg.c (out_file_list): Free malloced 'dir'. |
| (out_debug_info): Free malloced 'dirname' and 'comp_dir'. |
| |
| 2011-03-10 Alan Modra <amodra@gmail.com> |
| |
| * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS, |
| TARGET_SYMBOL_FIELDS): Don't define. |
| * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field. |
| |
| 2011-03-09 Michael Snyder <msnyder@vmware.com> |
| |
| * dwarf2dbg.c (out_file_list): Free malloced 'dir'. |
| (out_debug_info): Free malloced 'dirname' and 'comp_dir'. |
| (emit_fixed_inc_line_addr): Assign instead of conditional in |
| assert. |
| |
| 2011-03-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/obj-elf.c (elf_frob_symbol): Mention symbol name in |
| non-constant .size expression. |
| |
| 2011-03-02 Nick Clifton <nickc@redhat.com> |
| |
| * ecoff.c: Incldue filenames.h |
| |
| 2011-02-28 Kai Tietz <kai.tietz@onevision.com> |
| |
| * depend.c (register_dependency): Use filename_(n)cmp. |
| * dwarf2dbg.c (get_filenum): Likewise. |
| * ecoff.c (add_file): Likewise. |
| (ecoff_generate_asm_lineno): Likewise. |
| * input-scrub.c (new_logical_line_flags): Likewise. |
| * listing.c (file_info): Likewise. |
| (listing_newline): Likewise. |
| * remap.c (remap_debug_filename): Likewise. |
| * stabs.c (generate_asm_file): Likewise. |
| (stabs_generate_asm_lineno): Likewise. |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (append_insn): Disable branch relaxation for |
| DSP instructions. |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (macro): Handle M_PREF_AB. |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary |
| register to use. |
| (RELAX_BRANCH_UNCOND): Adjust accordingly. |
| (RELAX_BRANCH_LIKELY): Likewise. |
| (RELAX_BRANCH_LINK): Likewise. |
| (RELAX_BRANCH_TOOFAR): Likewise. |
| (RELAX_BRANCH_AT): New macro. |
| (append_insn): Encode the temporary register to use in standard |
| MIPS branch relaxation. |
| (relaxed_branch_length): Update according to changes to |
| RELAX_BRANCH_ENCODE. |
| (md_convert_frag): Use the encoded register as the temporary. |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (mips_fix_adjustable): On REL targets also |
| reject PC-relative relocations. |
| |
| 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (md_convert_frag): Correct message |
| capitalization. |
| |
| 2011-02-28 Alan Modra <amodra@gmail.com> |
| |
| * symbols.c (report_op_error): Remove unnecessary forward declaration. |
| Add "op" parameter. Report operator and operand segments in error |
| message, not operand symbols. |
| (resolve_symbol_value): Always set segment for equated symbols, not |
| just when finalizing. Adjust report_op_error calls. |
| |
| 2011-02-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations |
| if 64bit relocations aren't allowed. |
| |
| 2011-02-25 Alan Modra <amodra@gmail.com> |
| |
| PR gas/12519 |
| * config/obj-elf.c (elf_frob_symbol): Properly handle size expression. |
| |
| 2011-02-21 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate |
| initialization of offset_reloc. |
| |
| 2011-02-15 Richard Henderson <rth@redhat.com> |
| |
| * dw2gencfi.c (dot_cfi_dummy): New. |
| (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New. |
| * read.c (pobegin): Unconditionally call cfi_pop_insert. |
| |
| 2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2011-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-lex.l (BYTEOP2M): Remove tokenization. |
| * config/bfin-parse.y (BYTEOP2M): Delete token. |
| (asm_1): Remove BYTEOP2M insn matching. |
| |
| 2011-02-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-defs.h: Include opcode/bfin.h. |
| (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete. |
| |
| 2011-02-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo. |
| (Modify Registers): Fix subtracted typo. |
| (.byte2): Extend and swap descriptions with .byte4. |
| (.byte4): Extend and swap descriptions with .byte2. |
| (.db, .dw, .dd): Document behavior. |
| |
| 2011-02-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP. |
| |
| 2011-02-11 Alan Modra <amodra@gmail.com> |
| |
| * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify. |
| |
| 2011-02-10 Alan Modra <amodra@gmail.com> |
| |
| * doc/as.texinfo (Overview): Add missing markup around Blackfin |
| and PowerPC options. |
| |
| 2011-02-10 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC. |
| * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options. |
| (Overview <Target PowerPC options>): Add a number of missing options. |
| * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation. |
| |
| 2011-02-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/6957 |
| * config/tc-i386.c (i386_align_code): Use f32_patt when tuning |
| for i686. |
| |
| 2011-02-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags |
| for ISA extensions. |
| (md_parse_option): Likewise. |
| |
| 2011-02-04 Bernd Schmidt <bernds@codesourcery.com> |
| |
| * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic". |
| * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic". |
| (TIC6X Options): Don't mention "-matomic". |
| * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete. |
| (md_longopts): Remove corresponding entries. |
| (md_parse_option): Don't handle them. |
| (md_show_usage): Don't document them. |
| (tic6x_atomic): Delete variable. |
| (tic6x_update_features): Always copy tic6x_arch_enable to |
| tic6x_features. |
| (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC. |
| (s_tic6x_atomic, s_tic6x_noatomic): Remove functions. |
| (md_pseudo_table): Remove ".atomic" and ".noatomic". |
| |
| 2011-01-31 Nick Clifton <nickc@redhat.com> |
| |
| * write.c (write_contents): Include output file name and bfd error |
| value when reporting the inability to write to the output file. |
| * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align |
| frag that has a non-zero fill value. |
| |
| 2011-01-27 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rx.c (md_convert_frag): If we can't compute the target |
| address, zero out the values stored in the object file to make |
| objdump's output consistent. |
| |
| 2011-01-26 Kai Tietz <kai.tietz@onevision.com> |
| |
| * config/tc-i386.c (md_begin): Set for x64 windows COFF target |
| x86_dwarf2_return_column to 32. |
| |
| 2011-01-20 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12384 |
| * config/tc-h8300.c (constant_fits_width_p): Use correct type for |
| comparison. |
| |
| 2011-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * write.c (compress_debug): Return if section size is smaller |
| than 32 bytes. |
| |
| 2011-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/12409 |
| * write.c (compress_debug): Return if section size is 0. |
| |
| 2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com> |
| |
| * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible |
| cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te. |
| * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te, |
| fmp626} options. |
| |
| 2011-01-18 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12390 |
| * doc/all.texi: Add NS32K |
| * doc/as.texinfo: Remove target specific details of which |
| characters act as comment initiators and statement separators into |
| individual target specific files. |
| * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of |
| the hash character at the start of a line. |
| * doc/c-arm.texi (ARM-Chars): Likewise. |
| * doc/c-avr.texi (AVR-Chars): Likewise. |
| * doc/c-d10v.texi (D10V-Chars): Likewise. |
| * doc/c-d30v.texi (D30V-Chars): Likewise. |
| * doc/c-mmix.texi (MMIX-Chars): Likewise. |
| * doc/c-s390.texi (s390 characters): Likewise. |
| * doc/c-sh.texi (SH-Chars): Likewise. |
| * doc/c-sh64.texi (SH64-Chars): Likewise. |
| * doc/c-sparc.texi (SPARC-Chars): Likewise. |
| * doc/c-tic6x.texi (TIC6X Syntax): Likewise. |
| * doc/c-xtensa.texi (Xtensa Syntax): Likewise. |
| * doc/c-z80.texi (Z80-Chars): Likewise. |
| * doc/c-z8k.texi (Z8000-Chars): Likewise. |
| * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character. |
| * doc/c-arc.texi (ARC-Chars): Fill in this subsection. |
| * doc/c-bfin.texi (Blackfin Syntax): Document line comment and |
| line separator characters. |
| * doc/c-cr16.texi (CR16 Syntax): Likewise. |
| * doc/c-i386.texi (i386-Chars): Likewise. |
| * doc/c-i860.texi (i860-Chars): Likewise. |
| * doc/c-i960.texi (i960-Chars): Likewise. |
| * doc/c-ip2k.texi (IP2K-Chars): Likewise. |
| * doc/c-lm32.texi (LM32-Chars): likewise. |
| * doc/c-m32c.texi (M32C-Chars): Likewise. |
| * doc/c-m68hc11.texi (M68HC11-syntax): Likewise. |
| * doc/c-m68k.texi (M68K-Chars): Likewise. |
| * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise. |
| * doc/c-msp430.texi (MSP430-Chars): Likewise. |
| * doc/c-mt.texi (MT-Chars): Likewise. |
| * doc/c-ns32k.texi (NS32K-Chars): Likewise. |
| * doc/c-pj.texi (PJ-Chars): Likewise. |
| * doc/c-ppc.texi (PowerPC-Chars): Likewise. |
| * doc/c-rx.texi (RX-Chars): Likewise. |
| * doc/c-score.texi (SCORE-Chars): Likewise. |
| * doc/c-tic54x.texi (TIC54X-Chars): Likewise. |
| * doc/c-v850.texi (V850-Chars): Likewise. |
| * doc/c-vax.texi (VAX-Chars): Likewise. |
| * doc/c-xc16x.texi (xc16x-Chars): Likewise. |
| |
| 2011-01-17 Quentin Neill <quentin.neill@amd.com> |
| |
| * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS. |
| |
| * doc/c-i386.texi (i386-TBM): New section. |
| |
| 2011-01-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (disallow_64bit_disp): Renamed to ... |
| (disallow_64bit_reloc): This. |
| (md_assemble): Don't check movabs for x32 mode here. |
| (i386_target_format): Updated. |
| (tc_gen_reloc): Check if 64bit relocations are allowed. |
| |
| 2011-01-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (disallow_64bit_disp): New. |
| (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with |
| X86_64_ABI/X86_64_X32_ABI. |
| (md_assemble): Don't allow movabs with relocation in x32 mode. |
| (i386_target_format): Updated. |
| |
| 2011-01-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (OPTION_N32): Renamed to ... |
| (OPTION_X32): This. |
| (md_longopts): Replace n32 with x32. |
| (md_parse_option): Updated. |
| (md_show_usage): Likewise. |
| |
| * doc/c-i386.texi: Replace --n32 with --x32. |
| |
| 2011-01-11 Mingjie Xing <mingjie.xing@gmail.com> |
| |
| * config/tc-mips.c (mips_ip): Update error messages. Take an |
| unadjusted offset for "+c" argument. |
| |
| 2011-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-i386.c (x86_elf_abi): Only define for targets that use |
| it. |
| |
| 2011-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only |
| part of the file. |
| |
| 2011-01-10 Nathan Sidwell <nathan@codesourcery.com> |
| Glauber de Oliveira Costa <glommer@gmail.com> |
| |
| * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and |
| .tlsdescseq directive. |
| * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc |
| following a symbol. |
| (s_arm_tls_descseq): New directive. |
| (md_pseudo_table): Add it. |
| (encode_branch): Allow TLS_CALL relocs too. |
| (do_t_blx, do_t_branch23): Use encode_branch. |
| (reloc_names): Add tlsdesc and tlscall. |
| (md_apply_fix): Process tls desc relocations. |
| (tc_gen_reloc): Likewise. |
| (arm_fix_adjustable): Likewise. |
| |
| 2011-01-07 Quentin Neill <quentin.neill@amd.com> |
| |
| * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS. |
| |
| * doc/c-i386.texi (i386-BMI): New section. |
| |
| 2011-01-06 Paul Koning <ni1d@arrl.net> |
| |
| * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative |
| references to absolute addresses. |
| |
| 2011-01-05 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression |
| instead of an RH_NEG32 one. |
| |
| 2011-01-05 Jonathan Wakely <jwakely.gcc@gmail.com> |
| |
| * doc/c-i386.texi: Clarify --n32. |
| |
| 2011-01-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit |
| integer registers in VEX.vvvv. Check register-only source |
| operand when two source operands are swapped. Properly update |
| destination when two source operands are swapped. |
| |
| 2011-01-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * gas.c (parse_args): Update copyright to 2011. |
| |
| For older changes see ChangeLog-2010 |
| |
| Copyright (C) 2011 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
