| 2006-07-19 Mat Hostetter <mat@lcs.mit.edu> | |
| * symbols.c (report_op_error): Fix pasto. Don't use as_bad_where | |
| when file and line unknown. | |
| 2006-06-07 Joseph S. Myers <joseph@codesourcery.com> | |
| * po/Make-in (pdf, ps): New dummy targets. | |
| 2006-06-02 Joseph S. Myers <joseph@codesourcery.com> | |
| * doc/Makefile.am (TEXI2DVI): Define. | |
| * doc/Makefile.in: Regenerate. | |
| * doc/c-arc.texi: Fix typo. | |
| 2006-05-30 Nick Clifton <nickc@redhat.com> | |
| * po/es.po: Updated Spanish translation. | |
| 2006-05-25 Nathan Sidwell <nathan@codesourcery.com> | |
| * gas/config/tc-m68k.c (m68k_init_arch): Move checking of | |
| cfloat/m68881 to correct architecture before using it. | |
| 2006-05-16 Nick Clifton <nickc@redhat.com> | |
| * Import these patches from the mainline: | |
| 2006-05-16 Bjoern Haase <bjoern.m.haase@web.de> | |
| * config/tc-avr.h (TC_VALIDATE_FIX): Allow fixups for immediate | |
| constant values. | |
| 2006-05-05 Bjoern Haase <bjoern.m.haase@web.de> | |
| * gas/config/tc-avr.h (TC_VALIDATE_FIX): Define. Disable fixups | |
| for PMEM related expressions. | |
| 2006-05-11 Thiemo Seufer <ths@mips.com> | |
| * config/tc-mips.c (append_insn): Don't check the range of j or | |
| jal addresses. | |
| 2006-05-10 Alan Modra <amodra@bigpond.net.au> | |
| * dwarf2dbg.c (get_line_subseg): Attach new struct line_seg to end | |
| of list rather than beginning. | |
| 2006-05-10 Alan Modra <amodra@bigpond.net.au> | |
| * write.c (relax_segment): Add pass count arg. Don't error on | |
| negative org/space on first two passes. | |
| (relax_seg_info): New struct. | |
| (relax_seg, write_object_file): Adjust. | |
| * write.h (relax_segment): Update prototype. | |
| 2006-05-02 Joseph Myers <joseph@codesourcery.com> | |
| * config/tc-arm.c (do_iwmmxt_wldstbh): Don't multiply offset by 4 | |
| here. | |
| (md_apply_fix3): Multiply offset by 4 here for | |
| BFD_RELOC_ARM_CP_OFF_IMM_S2 and BFD_RELOC_ARM_T32_CP_OFF_IMM_S2. | |
| 2006-05-02 Daniel Jacobowitz <dan@codesourcery.com> | |
| * doc/Makefile.am (AM_MAKEINFOFLAGS): New. | |
| (TEXI2POD): Use AM_MAKEINFOFLAGS. | |
| (asconfig.texi): Don't set top_srcdir. | |
| * doc/as.texinfo: Don't use top_srcdir. | |
| * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated. | |
| 2006-05-02 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (arm_optimize_expr): New function. | |
| * config/tc-arm.h (md_optimize_expr): Define | |
| (arm_optimize_expr): Add prototype. | |
| (TC_FORCE_RELOCATION_SUB_SAME): Define. | |
| 2006-05-01 James Lemke <jwlemke@wasabisystems.com> | |
| * subsegs.c (subseg_set_rest): Always set seginfp->frchainP if NULL. | |
| 2006-04-25 Bob Wilson <bob.wilson@acm.org> | |
| * config/xtensa-relax.c (widen_spec_list): Use new "WIDE.<opcode>" | |
| syntax instead of hardcoded opcodes with ".w18" suffixes. | |
| (wide_branch_opcode): New. | |
| (build_transition): Use it to check for wide branch opcodes with | |
| either ".w18" or ".w15" suffixes. | |
| 2006-04-25 Bob Wilson <bob.wilson@acm.org> | |
| * config/tc-xtensa.c (xtensa_create_literal_symbol, | |
| xg_assemble_literal, xg_assemble_literal_space): Do not set the | |
| frag's is_literal flag. | |
| 2006-04-25 Bob Wilson <bob.wilson@acm.org> | |
| * config/xtensa-relax.c (XCHAL_HAVE_WIDE_BRANCHES): Provide default. | |
| 2006-04-16 Daniel Jacobowitz <dan@codesourcery.com> | |
| * po/POTFILES.in: Regenerated. | |
| 2006-04-14 Sterling Augustine <sterling@tensilica.com> | |
| * config/tc-xtensa.c (emit_single_op): Do not relax MOVI | |
| instructions when such transformations have been disabled. | |
| 2006-04-10 Sterling Augustine <sterling@tensilica.com> | |
| * config/tc-xtensa.c (xg_assemble_vliw_tokens): Record loop target | |
| symbols in RELAX[_CHECK]_ALIGN_NEXT_OPCODE frags. | |
| (xtensa_fix_close_loop_end_frags): Use the recorded values instead of | |
| decoding the loop instructions. Remove current_offset variable. | |
| (xtensa_fix_short_loop_frags): Likewise. | |
| (min_bytes_to_other_loop_end): Remove current_offset argument. | |
| 2006-04-09 Arnold Metselaar <arnold.metselaar@planet.nl> | |
| * config/tc-z80.c (z80_optimize_expr): Removed; redundant since 2006-04-04. | |
| * config/tc-z80.h (z80_optimize_expr, md_optimize_expr): Removed. | |
| 2006-04-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> | |
| * gas/config/tc-avr.c (mcu_types): Add support for attiny261, | |
| attiny461, attiny861, attiny25, attiny45, attiny85,attiny24, | |
| attiny44, attiny84, at90pwm2, at90pwm3, atmega164, atmega324, | |
| atmega644, atmega329, atmega3290, atmega649, atmega6490, | |
| atmega406, atmega640, atmega1280, atmega1281, at90can32, | |
| at90can64, at90usb646, at90usb647, at90usb1286 and | |
| at90usb1287. | |
| Move atmega48 and atmega88 from AVR_ISA_M8 to AVR_ISA_PWMx. | |
| 2006-04-07 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (parse_operands): Set default error message. | |
| 2006-04-07 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (parse_tb): Set inst.error before returning FAIL. | |
| 2006-04-07 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (md_apply_fix): Set H bit on blx instruction. | |
| 2006-04-07 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (THUMB2_LOAD_BIT): Define. | |
| (move_or_literal_pool): Handle Thumb-2 instructions. | |
| (do_t_ldst): Call move_or_literal_pool for =N addressing modes. | |
| 2006-04-07 Alan Modra <amodra@bigpond.net.au> | |
| PR 2512. | |
| * config/tc-i386.c (match_template): Move 64-bit operand tests | |
| inside loop. | |
| 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> | |
| * po/Make-in: Add install-html target. | |
| * Makefile.am: Add install-html and install-html-recursive targets. | |
| * Makefile.in: Regenerate. | |
| * configure.in: AC_SUBST datarootdir, docdir, htmldir. | |
| * configure: Regenerate. | |
| * doc/Makefile.am: Add install-html and install-html-am targets. | |
| * doc/Makefile.in: Regenerate. | |
| 2006-04-06 Alan Modra <amodra@bigpond.net.au> | |
| * frags.c (frag_offset_fixed_p): Reinitialise offset before | |
| second scan. | |
| 2006-04-05 Richard Sandiford <richard@codesourcery.com> | |
| Daniel Jacobowitz <dan@codesourcery.com> | |
| * config/tc-sparc.c (sparc_target_format): Handle TE_VXWORKS. | |
| (GOTT_BASE, GOTT_INDEX): New. | |
| (tc_gen_reloc): Don't alter relocations against GOTT_BASE and | |
| GOTT_INDEX when generating VxWorks PIC. | |
| * configure.tgt (sparc*-*-vxworks*): Remove this special case; | |
| use the generic *-*-vxworks* stanza instead. | |
| 2006-04-04 Alan Modra <amodra@bigpond.net.au> | |
| PR 997 | |
| * frags.c (frag_offset_fixed_p): New function. | |
| * frags.h (frag_offset_fixed_p): Declare. | |
| * expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction. | |
| (resolve_expression): Likewise. | |
| 2006-04-03 Sterling Augustine <sterling@tensilica.com> | |
| * config/tc-xtensa.c (init_op_placement_info_table): Check for formats | |
| of the same length but different numbers of slots. | |
| 2006-03-30 Andreas Schwab <schwab@suse.de> | |
| * configure.in: Fix help string for --enable-targets option. | |
| * configure: Regenerate. | |
| 2006-03-28 Nathan Sidwell <nathan@codesourcery.com> | |
| * gas/config/tc-m68k.c (find_cf_chip): Merge into ... | |
| (m68k_ip): ... here. Use for all chips. Protect against buffer | |
| overrun and avoid excessive copying. | |
| * config/tc-m68k.c (m68000_control_regs, m68010_control_regs, | |
| m68020_control_regs, m68040_control_regs, m68060_control_regs, | |
| mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs, | |
| mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs, | |
| mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ... | |
| (m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl, | |
| mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl, | |
| mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl, | |
| mcf5282_ctrl, mcfv4e_ctrl): ... these. | |
| (mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New. | |
| (struct m68k_cpu): Change chip field to control_regs. | |
| (current_chip): Remove. | |
| (control_regs): New. | |
| (m68k_archs, m68k_extensions): Adjust. | |
| (m68k_cpus): Reorder to be in cpu number order. Adjust. | |
| (CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove. | |
| (find_cf_chip): Reimplement for new organization of cpu table. | |
| (select_control_regs): Remove. | |
| (mri_chip): Adjust. | |
| (struct save_opts): Save control regs, not chip. | |
| (s_save, s_restore): Adjust. | |
| (m68k_lookup_cpu): Give deprecated warning when necessary. | |
| (m68k_init_arch): Adjust. | |
| (md_show_usage): Adjust for new cpu table organization. | |
| 2006-03-25 Bernd Schmidt <bernd.schmidt@analog.com> | |
| * config/bfin-defs.h (Expr_Node_Type enum): Add Expr_Node_GOT_Reloc. | |
| * config/bfin-lex.l: Recognize GOT17M4 and FUNCDESC_GOT17M4. | |
| * config/bfin-parse.y: Include "libbfd.h", "elf/common.h" and | |
| "elf/bfin.h". | |
| (GOT17M4, FUNCDESC_GOT17M4): New tokens of type <value>. | |
| (any_gotrel): New rule. | |
| (got): Use it, and create Expr_Node_GOT_Reloc nodes. | |
| * config/tc-bfin.c: Include "libbfd.h", "elf/common.h" and | |
| "elf/bfin.h". | |
| (DEFAULT_FLAGS, bfin_flags, bfin_pic_flag): New. | |
| (bfin_pic_ptr): New function. | |
| (md_pseudo_table): Add it for ".picptr". | |
| (OPTION_FDPIC): New macro. | |
| (md_longopts): Add -mfdpic. | |
| (md_parse_option): Handle it. | |
| (md_begin): Set BFD flags. | |
| (md_apply_fix3, bfin_fix_adjustable): Handle new relocs. | |
| (bfin_gen_ldstidxi): Adjust to match the trees that the parser gives | |
| us for GOT relocs. | |
| * Makefile.am (bfin-parse.o): Update dependencies. | |
| (DEPTC_bfin_elf): Likewise. | |
| * Makefile.in: Regenerate. | |
| 2006-03-25 Richard Sandiford <richard@codesourcery.com> | |
| * config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use | |
| mcfemac instead of mcfmac. | |
| 2006-03-22 Richard Sandiford <richard@codesourcery.com> | |
| Daniel Jacobowitz <dan@codesourcery.com> | |
| Phil Edwards <phil@codesourcery.com> | |
| Zack Weinberg <zack@codesourcery.com> | |
| Mark Mitchell <mark@codesourcery.com> | |
| Nathan Sidwell <nathan@codesourcery.com> | |
| * config/tc-mips.c (mips_target_format): Handle vxworks targets. | |
| (md_begin): Complain about -G being used for PIC. Don't change | |
| the text, data and bss alignments on VxWorks. | |
| (reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when | |
| generating VxWorks PIC. | |
| (load_address): Extend SVR4_PIC handling to VXWORKS_PIC. | |
| (macro): Likewise, but do not treat la $25 specially for | |
| VxWorks PIC, and do not handle jal. | |
| (OPTION_MVXWORKS_PIC): New macro. | |
| (md_longopts): Add -mvxworks-pic. | |
| (md_parse_option): Don't complain about using PIC and -G together here. | |
| Handle OPTION_MVXWORKS_PIC. | |
| (md_estimate_size_before_relax): Always use the first relaxation | |
| sequence on VxWorks. | |
| * config/tc-mips.h (VXWORKS_PIC): New. | |
| 2006-03-21 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (md_apply_fix): Fix typo in offset mask. | |
| 2006-03-21 Sterling Augustine <sterling@tensilica.com> | |
| * config/tc-xtensa.c (enforce_three_byte_loop_align): New flag. | |
| (xtensa_setup_hw_workarounds): Set this new flag for older hardware. | |
| (get_loop_align_size): New. | |
| (xtensa_end): Skip xtensa_mark_narrow_branches when not aligning. | |
| (xtensa_mark_zcl_first_insns): Prevent widening of first loop frag. | |
| (get_text_align_power): Rewrite to handle inputs in the range 2-8. | |
| (get_noop_aligned_address): Use get_loop_align_size. | |
| (get_aligned_diff): Likewise. | |
| 2006-03-21 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (insns): Correct opcodes for ldrbt and strbt. | |
| 2006-03-20 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define. | |
| (do_t_branch): Encode branches inside IT blocks as unconditional. | |
| (do_t_cps): New function. | |
| (do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi, | |
| do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints. | |
| (opcode_lookup): Allow conditional suffixes on all instructions in | |
| Thumb mode. | |
| (md_assemble): Advance condexec state before checking for errors. | |
| (insns): Use do_t_cps. | |
| 2006-03-20 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (output_relax_insn): Call dwarf2_emit_insn before | |
| outputting the insn. | |
| 2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de> | |
| * config/tc-vax.c: Update copyright year. | |
| * config/tc-vax.h: Likewise. | |
| 2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de> | |
| * config/tc-vax.c (md_chars_to_number): Used only locally, so | |
| make it static. | |
| * config/tc-vax.h (md_chars_to_number): Remove obsolete declaration. | |
| 2006-03-17 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (insns): Add ldm and stm. | |
| 2006-03-17 Ben Elliston <bje@au.ibm.com> | |
| PR gas/2446 | |
| * doc/as.texinfo (Ident): Document this directive more thoroughly. | |
| 2006-03-16 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (insns): Add "svc". | |
| 2006-03-13 Bob Wilson <bob.wilson@acm.org> | |
| * config/tc-xtensa.c (xg_translate_sysreg_op): Remove has_underbar | |
| flag and avoid double underscore prefixes. | |
| 2006-03-10 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (md_begin): Handle EABIv5. | |
| (arm_eabis): Add EF_ARM_EABI_VER5. | |
| * doc/c-arm.texi: Document -meabi=5. | |
| 2006-03-10 Ben Elliston <bje@au.ibm.com> | |
| * app.c (do_scrub_chars): Simplify string handling. | |
| 2006-03-07 Richard Sandiford <richard@codesourcery.com> | |
| Daniel Jacobowitz <dan@codesourcery.com> | |
| Zack Weinberg <zack@codesourcery.com> | |
| Nathan Sidwell <nathan@codesourcery.com> | |
| Paul Brook <paul@codesourcery.com> | |
| Ricardo Anguiano <anguiano@codesourcery.com> | |
| Phil Edwards <phil@codesourcery.com> | |
| * config/tc-arm.c (md_apply_fix): Install a value of zero into a | |
| BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA | |
| R_ARM_ABS12 reloc. | |
| (tc_gen_reloc): Keep the original fx_offset for RELA pc-relative | |
| relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12 | |
| relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets. | |
| 2006-03-06 Bob Wilson <bob.wilson@acm.org> | |
| * config/tc-xtensa.c (xtensa_post_relax_hook): Generate literal tables | |
| even when using the text-section-literals option. | |
| 2006-03-06 Nathan Sidwell <nathan@codesourcery.com> | |
| * config/tc-m68k.c (m68k_extensions): Allow 'float' on both m68k | |
| and cf. | |
| (m68k_ip): <case 'J'> Check we have some control regs. | |
| (md_parse_option): Allow raw arch switch. | |
| (m68k_init_arch): Better detection of arch/cpu mismatch. Detect | |
| whether 68881 or cfloat was meant by -mfloat. | |
| (md_show_usage): Adjust extension display. | |
| (m68k_elf_final_processing): Adjust. | |
| 2006-03-03 Bjoern Haase <bjoern.m.haase@web.de> | |
| * config/tc-avr.c (avr_mod_hash_value): New function. | |
| (md_apply_fix, exp_mod): Use BFD_RELOC_HH8_LDI and | |
| BFD_RELOC_MS8_LDI for hlo8() and hhi8() | |
| (md_begin): Set linkrelax variable to 1, use avr_mod_hash_value | |
| instead of int avr_ldi_expression: use avr_mod_hash_value instead | |
| of (int). | |
| (tc_gen_reloc): Handle substractions of symbols, if possible do | |
| fixups, abort otherwise. | |
| * config/tc-avr.h (TC_LINKRELAX_FIXUP, TC_VALIDATE_FIX, | |
| tc_fix_adjustable): Define. | |
| 2006-03-02 James E Wilson <wilson@specifix.com> | |
| * config/tc-ia64.c (emit_one_bundle): For IA64_OPCODE_LAST, if we | |
| change the template, then clear md.slot[curr].end_of_insn_group. | |
| 2006-02-28 Jan Beulich <jbeulich@novell.com> | |
| * macro.c (get_any_string): Don't insert quotes for <>-quoted input. | |
| 2006-02-28 Jan Beulich <jbeulich@novell.com> | |
| PR/1070 | |
| * macro.c (getstring): Don't treat parentheses special anymore. | |
| (get_any_string): Don't consider '(' and ')' as quoting anymore. | |
| Special-case '(', ')', '[', and ']' when dealing with non-quoting | |
| characters. | |
| 2006-02-28 Mat <mat@csail.mit.edu> | |
| * dwarf2dbg.c (get_filenum): Don't inadvertently decrease files_in_use. | |
| 2006-02-27 Jakub Jelinek <jakub@redhat.com> | |
| * dw2gencfi.c (struct fde_entry, struct cie_entry): Add signal_frame | |
| field. | |
| (CFI_signal_frame): Define. | |
| (cfi_pseudo_table): Add .cfi_signal_frame. | |
| (dot_cfi): Handle CFI_signal_frame. | |
| (output_cie): Handle cie->signal_frame. | |
| (select_cie_for_fde): Don't share CIE if signal_frame flag is | |
| different. Copy signal_frame from FDE to newly created CIE. | |
| * doc/as.texinfo: Document .cfi_signal_frame. | |
| 2006-02-27 Carlos O'Donell <carlos@codesourcery.com> | |
| * doc/Makefile.am: Add html target. | |
| * doc/Makefile.in: Regenerate. | |
| * po/Make-in: Add html target. | |
| 2006-02-27 H.J. Lu <hongjiu.lu@intel.com> | |
| * config/tc-i386.c (output_insn): Support Intel Merom New | |
| Instructions. | |
| * config/tc-i386.h (CpuMNI): New. | |
| (CpuUnknownFlags): Add CpuMNI. | |
| 2006-02-24 David S. Miller <davem@sunset.davemloft.net> | |
| * config/tc-sparc.c (priv_reg_table): Add entry for "gl". | |
| (hpriv_reg_table): New table for hyperprivileged registers. | |
| (sparc_ip): New cases '$' and '%' for wrhpr/rdhpr hyperprivileged | |
| register encoding. | |
| 2006-02-24 DJ Delorie <dj@redhat.com> | |
| * config/tc-m32c.h (md_apply_fix): Define to m32c_apply_fix. | |
| (tc_gen_reloc): Don't define. | |
| * config/tc-m32c.c (rl_for, relaxable): New convenience macros. | |
| (OPTION_LINKRELAX): New. | |
| (md_longopts): Add it. | |
| (m32c_relax): New. | |
| (md_parse_options): Set it. | |
| (md_assemble): Emit relaxation relocs as needed. | |
| (md_convert_frag): Emit relaxation relocs as needed. | |
| (md_cgen_lookup_reloc): Add LAB_8_8 and LAB_8_16. | |
| (m32c_apply_fix): New. | |
| (tc_gen_reloc): New. | |
| (m32c_force_relocation): Force out jump relocs when relaxing. | |
| (m32c_fix_adjustable): Return false if relaxing. | |
| 2006-02-24 Paul Brook <paul@codesourcery.com> | |
| * config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7, | |
| arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables. | |
| (struct asm_barrier_opt): Define. | |
| (arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables. | |
| (parse_psr): Accept V7M psr names. | |
| (parse_barrier): New function. | |
| (enum operand_parse_code): Add OP_oBARRIER. | |
| (parse_operands): Implement OP_oBARRIER. | |
| (do_barrier): New function. | |
| (do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions. | |
| (do_t_cpsi): Add V7M restrictions. | |
| (do_t_mrs, do_t_msr): Validate V7M variants. | |
| (md_assemble): Check for NULL variants. | |
| (v7m_psrs, barrier_opt_names): New tables. | |
| (insns): Add V7 instructions. Mark V6 instructions absent from V7M. | |
| (md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh. | |
| (arm_cpu_option_table): Add Cortex-M3, R4 and A8. | |
| (arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m. | |
| (struct cpu_arch_ver_table): Define. | |
| (cpu_arch_ver): New. | |
| (aeabi_set_public_attributes): Use cpu_arch_ver. Set | |
| Tag_CPU_arch_profile. | |
| * doc/c-arm.texi: Document new cpu and arch options. | |
| 2006-02-23 H.J. Lu <hongjiu.lu@intel.com> | |
| * config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b. | |
| 2006-02-23 H.J. Lu <hongjiu.lu@intel.com> | |
| * config/tc-ia64.c: Update copyright years. | |
| 2006-02-22 H.J. Lu <hongjiu.lu@intel.com> | |
| * config/tc-ia64.c (specify_resource): Add the rule 17 from | |
| SDM 2.2. | |
| 2005-02-22 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (do_pld): Remove incorrect write to | |
| inst.instruction. | |
| (encode_thumb32_addr_mode): Use correct operand. | |
| 2006-02-21 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (md_apply_fix): Fix off-by-one errors. | |
| 2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com> | |
| Anil Paranjape <anilp1@kpitcummins.com> | |
| Shilin Shakti <shilins@kpitcummins.com> | |
| * Makefile.am: Add xc16x related entry. | |
| * Makefile.in: Regenerate. | |
| * configure.in: Added xc16x related entry. | |
| * configure: Regenerate. | |
| * config/tc-xc16x.h: New file | |
| * config/tc-xc16x.c: New file | |
| * doc/c-xc16x.texi: New file for xc16x | |
| * doc/all.texi: Entry for xc16x | |
| * doc/Makefile.texi: Added c-xc16x.texi | |
| * NEWS: Announce the support for the new target. | |
| 2006-02-16 Nick Hudson <nick.hudson@dsl.pipex.com> | |
| * configure.tgt: set emulation for mips-*-netbsd* | |
| 2006-02-14 Jakub Jelinek <jakub@redhat.com> | |
| * config.in: Rebuilt. | |
| 2006-02-13 Bob Wilson <bob.wilson@acm.org> | |
| * config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting | |
| from 1, not 0, in error messages. | |
| (md_assemble): Simplify special-case check for ENTRY instructions. | |
| (tinsn_has_invalid_symbolic_operands): Do not include opcode and | |
| operand in error message. | |
| 2006-02-13 Joseph S. Myers <joseph@codesourcery.com> | |
| * configure.tgt (arm-*-linux-gnueabi*): Change to | |
| arm-*-linux-*eabi*. | |
| 2006-02-10 Nick Clifton <nickc@redhat.com> | |
| * config/tc-crx.c (check_range): Ensure that the sign bit of a | |
| 32-bit value is propagated into the upper bits of a 64-bit long. | |
| * config/tc-arc.c (init_opcode_tables): Fix cast. | |
| (arc_extoper, md_operand): Likewise. | |
| 2006-02-09 David Heine <dlheine@tensilica.com> | |
| * config/tc-xtensa.c (xg_assembly_relax): Increment steps_taken for | |
| each relaxation step. | |
| 2006-02-09 Eric Botcazou <ebotcazou@libertysurf.fr> | |
| * configure.in (CHECK_DECLS): Add vsnprintf. | |
| * configure: Regenerate. | |
| * messages.c (errno.h, stdarg.h, varargs.h, va_list): Do not | |
| include/declare here, but... | |
| * as.h: Move code detecting VARARGS idiom to the top. | |
| (errno.h, stdarg.h, varargs.h, va_list): ...here. | |
| (vsnprintf): Declare if not already declared. | |
| 2006-02-08 H.J. Lu <hongjiu.lu@intel.com> | |
| * as.c (close_output_file): New. | |
| (main): Register close_output_file with xatexit before | |
| dump_statistics. Don't call output_file_close. | |
| 2006-02-07 Nathan Sidwell <nathan@codesourcery.com> | |
| * config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs, | |
| mcf5329_control_regs): New. | |
| (not_current_architecture, selected_arch, selected_cpu): New. | |
| (m68k_archs, m68k_extensions): New. | |
| (archs): Renamed to ... | |
| (m68k_cpus): ... here. Adjust. | |
| (n_arches): Remove. | |
| (md_pseudo_table): Add arch and cpu directives. | |
| (find_cf_chip, m68k_ip): Adjust table scanning. | |
| (no_68851, no_68881): Remove. | |
| (md_assemble): Lazily initialize. | |
| (select_control_regs): Adjust cpu names. Add 5208, 5213, 5329. | |
| (md_init_after_args): Move functionality to m68k_init_arch. | |
| (mri_chip): Adjust table scanning. | |
| (md_parse_option): Reimplement 'm' processing to add -march & -mcpu | |
| options with saner parsing. | |
| (m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension, | |
| m68k_init_arch): New. | |
| (s_m68k_cpu, s_m68k_arch): New. | |
| (md_show_usage): Adjust. | |
| (m68k_elf_final_processing): Set CF EF flags. | |
| * config/tc-m68k.h (m68k_init_after_args): Remove. | |
| (tc_init_after_args): Remove. | |
| * doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options. | |
| (M68k-Directives): Document .arch and .cpu directives. | |
| 2006-02-05 Arnold Metselaar <arnold.metselaar@planet.nl> | |
| * config/tc-z80.c (z80_start_line_hook): allow .equ and .defl as | |
| synonyms for equ and defl. | |
| (z80_cons_fix_new): New function. | |
| (emit_byte): Disallow relative jumps to absolute locations. | |
| (emit_data): Only handle defb, prototype changed, because defb is | |
| now handled as pseudo-op rather than an instruction. | |
| (instab): Entries for defb,defw,db,dw moved from here... | |
| (md_pseudo_table): ... to here, use generic cons() for defw,dw. | |
| Add entries for def24,def32,d24,d32. | |
| (md_assemble): Improved error handling. | |
| (md_apply_fix): New case BFD_RELOC_24, set fixP->fx_no_overflow to one. | |
| * config/tc-z80.h (TC_CONS_FIX_NEW): Define. | |
| (z80_cons_fix_new): Declare. | |
| * doc/c-z80.texi (defb, db): Mention warning on overflow. | |
| (def24,d24,def32,d32): New pseudo-ops. | |
| 2006-02-02 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (do_shift): Remove Thumb-1 constraint. | |
| 2005-02-02 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (T2_OPCODE_MASK, T2_DATA_OP_SHIFT, T2_OPCODE_AND, | |
| T2_OPCODE_BIC, T2_OPCODE_ORR, T2_OPCODE_ORN, T2_OPCODE_EOR, | |
| T2_OPCODE_ADD, T2_OPCODE_ADC, T2_OPCODE_SBC, T2_OPCODE_SUB, | |
| T2_OPCODE_RSB): Define. | |
| (thumb32_negate_data_op): New function. | |
| (md_apply_fix): Use it. | |
| 2006-01-31 Bob Wilson <bob.wilson@acm.org> | |
| * config/xtensa-istack.h (TInsn): Remove record_fix and sub_symbol | |
| fields. | |
| * config/tc-xtensa.h (xtensa_frag_type): Remove slot_sub_symbols field. | |
| * config/tc-xtensa.c (md_apply_fix): Check for unexpected uses of | |
| subtracted symbols. | |
| (relaxation_requirements): Add pfinish_frag argument and use it to | |
| replace setting tinsn->record_fix fields. | |
| (xg_assemble_vliw_tokens): Adjust calls to relaxation_requirements | |
| and vinsn_to_insnbuf. Remove references to record_fix and | |
| slot_sub_symbols fields. | |
| (xtensa_mark_narrow_branches): Delete unused code. | |
| (is_narrow_branch_guaranteed_in_range): Handle expr that is not just | |
| a symbol. | |
| (convert_frag_immed): Adjust vinsn_to_insnbuf call and do not set | |
| record_fix fields. | |
| (tinsn_immed_from_frag): Remove code for handling slot_sub_symbols. | |
| (vinsn_to_insnbuf): Change use of record_fixup argument, replacing use | |
| of the record_fix field. Simplify error messages for unexpected | |
| symbolic operands. | |
| (set_expr_symbol_offset_diff): Delete. | |
| 2006-01-31 Paul Brook <paul@codesourcery.com> | |
| * config/tc-arm.c (arm_reg_parse): Check if reg is non-NULL. | |
| 2006-01-31 Paul Brook <paul@codesourcery.com> | |
| Richard Earnshaw <rearnsha@arm.com> | |
| * config/tc-arm.c: Use arm_feature_set. | |
| (arm_ext_*, arm_arch_full, arm_arch_t2, arm_arch_none, | |
| arm_cext_iwmmxt, arm_cext_xscale, arm_cext_maverick, fpu_fpa_ext_v1, | |
| fpu_fpa_ext_v2, fpu_vfp_ext_v1xd, fpu_vfp_ext_v1, fpu_vfp_ext_v2): | |
| New variables. | |
| (insns): Use them. | |
| (md_atof, opcode_select, opcode_select, md_assemble, md_assemble, | |
| md_begin, arm_parse_extension, arm_parse_cpu, arm_parse_arch, | |
| arm_parse_fpu, arm_parse_float_abi, aeabi_set_public_attributes, | |
| s_arm_cpu, s_arm_arch, s_arm_fpu): Use macros for accessing CPU | |
| feature flags. | |
| (arm_legacy_option_table, arm_option_cpu_value_table): New types. | |
| (arm_opts): Move old cpu/arch options from here... | |
| (arm_legacy_opts): ... to here. | |
| (md_parse_option): Search arm_legacy_opts. | |
| (arm_cpus, arm_archs, arm_extensions, arm_fpus) | |
| (arm_float_abis, arm_eabis): Make const. | |
| 2006-01-25 Bob Wilson <bob.wilson@acm.org> | |
| * config/tc-xtensa.c (md_apply_fix): Set value to zero for PLT relocs. | |
| 2006-01-21 Jie Zhang <jie.zhang@analog.com> | |
| * config/bfin-parse.y (asm_1): Check value range for 16 bit immediate | |
| in load immediate intruction. | |
| 2006-01-21 Jie Zhang <jie.zhang@analog.com> | |
| * config/bfin-parse.y (value_match): Use correct conversion | |
| specifications in template string for __FILE__ and __LINE__. | |
| (binary): Ditto. | |
| (unary): Ditto. | |
| 2006-01-18 Alexandre Oliva <aoliva@redhat.com> | |
| Introduce TLS descriptors for i386 and x86_64. | |
| * config/tc-i386.c (tc_i386_fix_adjustable): Handle | |
| BFD_RELOC_386_TLS_GOTDESC, BFD_RELOC_386_TLS_DESC_CALL, | |
| BFD_RELOC_X86_64_GOTPC32_TLSDESC, BFD_RELOC_X86_64_TLSDESC_CALL. | |
| (optimize_disp): Emit fix up for BFD_RELOC_386_TLS_DESC_CALL and | |
| BFD_RELOC_X86_64_TLSDESC_CALL immediately, and clear the | |
| displacement bits. | |
| (build_modrm_byte): Set up zero modrm for TLS desc calls. | |
| (lex_got): Handle @tlsdesc and @tlscall. | |
| (md_apply_fix, tc_gen_reloc): Handle the new relocations. | |
| 2006-01-11 Nick Clifton <nickc@redhat.com> | |
| Fixes for building on 64-bit hosts: | |
| * config/tc-avr.c (mod_index): New union to allow conversion | |
| between pointers and integers. | |
| (md_begin, avr_ldi_expression): Use it. | |
| * config/tc-i370.c (md_assemble): Add cast for argument to print | |
| statement. | |
| * config/tc-tic54x.c (subsym_substitute): Likewise. | |
| * config/tc-mn10200.c (md_assemble): Use a union to convert the | |
| opindex field of fr_cgen structure into a pointer so that it can | |
| be stored in a frag. | |
| * config/tc-mn10300.c (md_assemble): Likewise. | |
| * config/tc-frv.c (frv_debug_tomcat): Use %p to print pointer | |
| types. | |
| * config/tc-v850.c: Replace uses of (int) casts with correct | |
| types. | |
| 2006-01-09 H.J. Lu <hongjiu.lu@intel.com> | |
| PR gas/2117 | |
| * symbols.c (snapshot_symbol): Don't change a defined symbol. | |
| 2006-01-03 Hans-Peter Nilsson <hp@bitrange.com> | |
| PR gas/2101 | |
| * config/tc-mmix.c (mmix_handle_mmixal): Don't treat #[0-9][FB] as | |
| a local-label reference. | |
| For older changes see ChangeLog-2005 | |
| Local Variables: | |
| mode: change-log | |
| left-margin: 8 | |
| fill-column: 74 | |
| version-control: never | |
| End: |