| /* Opcode table for the ARC. | |
| Copyright 1994, 1995, 1997, 1998, 2000, 2001, 2002, 2005, 2006, 2007, 2008, 2009 | |
| Free Software Foundation, Inc. | |
| Contributed by Doug Evans (dje@cygnus.com). | |
| This file is part of GAS, the GNU Assembler, GDB, the GNU debugger, and | |
| the GNU Binutils. | |
| GAS/GDB is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2, or (at your option) | |
| any later version. | |
| GAS/GDB is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with GAS or GDB; see the file COPYING. If not, write to | |
| the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, | |
| MA 02110-1301, USA. */ | |
| /* List of the various cpu types. | |
| The tables currently use bit masks to say whether the instruction or | |
| whatever is supported by a particular cpu. This lets us have one entry | |
| apply to several cpus. | |
| This duplicates bfd_mach_arc_xxx. For now I wish to isolate this from bfd | |
| and bfd from this. Also note that these numbers are bit values as we want | |
| to allow for things available on more than one ARC (but not necessarily all | |
| ARCs). */ | |
| /* The `base' cpu must be 0 (table entries are omitted for the base cpu). | |
| The cpu type is treated independently of endianness. | |
| The complete `mach' number includes endianness. | |
| These values are internal to opcodes/bfd/binutils/gas. */ | |
| #define ARC_MACH_ARC4 1 | |
| #define ARC_MACH_ARC5 2 | |
| #define ARC_MACH_ARC6 4 | |
| #define ARC_MACH_ARC7 8 | |
| /* Additional cpu values can be inserted here and ARC_MACH_BIG moved down. */ | |
| #define ARC_MACH_BIG 16 | |
| /* ARC processors which implement ARCompact ISA. */ | |
| #define ARCOMPACT (ARC_MACH_ARC5 | ARC_MACH_ARC6 | ARC_MACH_ARC7) | |
| /* Mask of number of bits necessary to record cpu type. */ | |
| #define ARC_MACH_CPU_MASK (ARC_MACH_BIG - 1) | |
| /* Mask of number of bits necessary to record cpu type + endianness. */ | |
| #define ARC_MACH_MASK ((ARC_MACH_BIG << 1) - 1) | |
| /* Type to denote an ARC instruction (at least a 32 bit unsigned int). */ | |
| typedef unsigned int arc_insn; | |
| struct arc_opcode { | |
| char *syntax; /* syntax of insn */ | |
| unsigned long mask, value; /* recognize insn if (op&mask)==value */ | |
| int flags; /* various flag bits */ | |
| /* Values for `flags'. */ | |
| /* Return CPU number, given flag bits. */ | |
| #define ARC_OPCODE_CPU(bits) ((bits) & ARC_MACH_CPU_MASK) | |
| /* Return MACH number, given flag bits. */ | |
| #define ARC_OPCODE_MACH(bits) ((bits) & ARC_MACH_MASK) | |
| /* First opcode flag bit available after machine mask. */ | |
| #define ARC_OPCODE_FLAG_START (ARC_MACH_MASK + 1) | |
| /* This insn is a conditional branch. */ | |
| #define ARC_OPCODE_COND_BRANCH (ARC_OPCODE_FLAG_START) | |
| #define SYNTAX_LENGTH (ARC_OPCODE_COND_BRANCH << 1) | |
| #define SYNTAX_3OP (SYNTAX_LENGTH ) | |
| #define SYNTAX_2OP (SYNTAX_3OP << 1) | |
| #define SYNTAX_1OP (SYNTAX_2OP << 1) | |
| #define SYNTAX_NOP (SYNTAX_1OP << 1) | |
| #define OP1_DEST_IGNORED (SYNTAX_NOP << 1) | |
| #define OP1_MUST_BE_IMM (OP1_DEST_IGNORED << 1) | |
| #define OP1_IMM_IMPLIED (OP1_MUST_BE_IMM << 1) | |
| #define SUFFIX_NONE (OP1_IMM_IMPLIED << 1) | |
| #define SUFFIX_COND (SUFFIX_NONE << 1) | |
| #define SUFFIX_FLAG (SUFFIX_COND << 1) | |
| #define SYNTAX_VALID (SUFFIX_FLAG << 1) | |
| #define SIMD_LONG_INST (SYNTAX_VALID << 1) | |
| #define AC_SYNTAX_3OP (0x01) | |
| #define AC_SYNTAX_2OP (AC_SYNTAX_3OP << 1) | |
| #define AC_SYNTAX_1OP (AC_SYNTAX_2OP << 1) | |
| #define AC_SYNTAX_NOP (AC_SYNTAX_1OP << 1) | |
| #define AC_SYNTAX_SIMD (AC_SYNTAX_NOP << 1) | |
| #define AC_OP1_DEST_IGNORED (AC_SYNTAX_SIMD << 1) | |
| #define AC_OP1_MUST_BE_IMM (AC_OP1_DEST_IGNORED << 1) | |
| #define AC_OP1_IMM_IMPLIED (AC_OP1_MUST_BE_IMM << 1) | |
| #define AC_SIMD_SYNTAX_DISC (AC_OP1_IMM_IMPLIED << 1) | |
| #define AC_SIMD_IREGA (AC_SIMD_SYNTAX_DISC << 1) | |
| #define AC_SIMD_IREGB (AC_SIMD_IREGA << 1) | |
| #define AC_SIMD_SYNTAX_VVV (AC_SIMD_IREGB << 1) | |
| #define AC_SIMD_SYNTAX_VV0 (AC_SIMD_SYNTAX_VVV << 1) | |
| #define AC_SIMD_SYNTAX_VbI0 (AC_SIMD_SYNTAX_VV0 << 1) | |
| #define AC_SIMD_SYNTAX_Vb00 (AC_SIMD_SYNTAX_VbI0 << 1) | |
| #define AC_SIMD_SYNTAX_VbC0 (AC_SIMD_SYNTAX_Vb00 << 1) | |
| #define AC_SIMD_SYNTAX_V00 (AC_SIMD_SYNTAX_VbC0 << 1) | |
| #define AC_SIMD_SYNTAX_VC0 (AC_SIMD_SYNTAX_V00 << 1) | |
| #define AC_SIMD_SYNTAX_VVC (AC_SIMD_SYNTAX_VC0 << 1) | |
| #define AC_SIMD_SYNTAX_VV (AC_SIMD_SYNTAX_VVC << 1) | |
| #define AC_SIMD_SYNTAX_VVI (AC_SIMD_SYNTAX_VV << 1) | |
| #define AC_SIMD_SYNTAX_C (AC_SIMD_SYNTAX_VVI << 1) | |
| #define AC_SIMD_SYNTAX_0 (AC_SIMD_SYNTAX_C << 1) | |
| #define AC_SIMD_SYNTAX_CC (AC_SIMD_SYNTAX_0 << 1) | |
| #define AC_SIMD_SYNTAX_C0 (AC_SIMD_SYNTAX_CC << 1) | |
| #define AC_SIMD_SYNTAX_DC (AC_SIMD_SYNTAX_C0 << 1) | |
| #define AC_SIMD_SYNTAX_D0 (AC_SIMD_SYNTAX_DC << 1) | |
| #define AC_SIMD_SYNTAX_VD (AC_SIMD_SYNTAX_D0 << 1) | |
| #define AC_SIMD_SYNTAX_VVL (AC_SIMD_SYNTAX_VD << 1) | |
| #define AC_SIMD_SYNTAX_VU0 (AC_SIMD_SYNTAX_VVL << 1) | |
| #define AC_SIMD_SYNTAX_VL0 (AC_SIMD_SYNTAX_VU0 << 1) | |
| #define AC_SIMD_SYNTAX_C00 (AC_SIMD_SYNTAX_VL0 << 1) | |
| //#define AC_SUFFIX_NONE (AC_SIMD_SYNTAX_VD << 1) | |
| #define AC_SUFFIX_NONE (0x1) | |
| #define AC_SUFFIX_COND (AC_SUFFIX_NONE << 1) | |
| #define AC_SUFFIX_FLAG (AC_SUFFIX_COND << 1) | |
| #define AC_SIMD_FLAGS_NONE (AC_SUFFIX_FLAG << 1) | |
| #define AC_SIMD_FLAG_SET (AC_SIMD_FLAGS_NONE << 1) | |
| #define AC_SIMD_FLAG1_SET (AC_SIMD_FLAG_SET << 1) | |
| #define AC_SIMD_FLAG2_SET (AC_SIMD_FLAG1_SET << 1) | |
| #define AC_SIMD_ENCODE_U8 (AC_SIMD_FLAG2_SET << 1) | |
| #define AC_SIMD_ENCODE_U6 (AC_SIMD_ENCODE_U8 << 1) | |
| #define AC_SIMD_SCALE_1 (AC_SIMD_ENCODE_U6 << 1) | |
| #define AC_SIMD_SCALE_2 (AC_SIMD_SCALE_1 << 1) | |
| #define AC_SIMD_SCALE_3 (AC_SIMD_SCALE_2 << 1) | |
| #define AC_SIMD_SCALE_4 (AC_SIMD_SCALE_3 << 1) | |
| #define AC_SIMD_SCALE_0 (AC_SIMD_SCALE_4 << 1) | |
| #define AC_SIMD_ENCODE_LIMM (AC_SIMD_SCALE_0 << 1) | |
| #define AC_SIMD_EXTENDED (AC_SIMD_ENCODE_LIMM << 1) | |
| #define AC_SIMD_EXTEND2 (AC_SIMD_EXTENDED << 1) | |
| #define AC_SIMD_EXTEND3 (AC_SIMD_EXTEND2 << 1) | |
| #define AC_SUFFIX_LANEMASK (AC_SIMD_EXTEND3 << 1) | |
| #define AC_SIMD_ENCODE_S12 (AC_SUFFIX_LANEMASK << 1) | |
| #define AC_SIMD_ZERVA (AC_SIMD_ENCODE_S12 << 1) | |
| #define AC_SIMD_ZERVB (AC_SIMD_ZERVA << 1) | |
| #define AC_SIMD_ZERVC (AC_SIMD_ZERVB << 1) | |
| #define AC_SIMD_SETLM (AC_SIMD_ZERVC << 1) | |
| #define AC_SIMD_EXTEND1 (AC_SIMD_SETLM << 1) | |
| #define AC_SIMD_KREG (AC_SIMD_EXTEND1 << 1) | |
| #define AC_SIMD_ENCODE_U16 (AC_SIMD_KREG << 1) | |
| #define I(x) (((unsigned) (x) & 31) << 27) | |
| #define A(x) (((unsigned) (x) & ARC_MASK_REG) << ARC_SHIFT_REGA) | |
| #define B(x) (((unsigned) (x) & ARC_MASK_REG) << ARC_SHIFT_REGB) | |
| #define C(x) (((unsigned) (x) & ARC_MASK_REG) << ARC_SHIFT_REGC) | |
| #define R(x,b,m) (((unsigned) (x) & (m)) << (b)) /* value X, mask M, at bit B */ | |
| /* These values are used to optimize assembly and disassembly. Each insn is | |
| on a list of related insns (same first letter for assembly, same insn code | |
| for disassembly). */ | |
| struct arc_opcode *next_asm; /* Next instruction to try during assembly. */ | |
| struct arc_opcode *next_dis; /* Next instruction to try during disassembly. */ | |
| /* Macros to create the hash values for the lists. */ | |
| #define ARC_HASH_OPCODE(string) \ | |
| ((string)[0] >= 'a' && (string)[0] <= 'z' ? (string)[0] - 'a' : 26) | |
| #define ARC_HASH_ICODE(insn) \ | |
| ((unsigned int) (insn) >> 27) | |
| /* Macros to access `next_asm', `next_dis' so users needn't care about the | |
| underlying mechanism. */ | |
| #define ARC_OPCODE_NEXT_ASM(op) ((op)->next_asm) | |
| #define ARC_OPCODE_NEXT_DIS(op) ((op)->next_dis) | |
| unsigned long mask2,value2; /* second word for 64 bit instructions*/ | |
| }; | |
| struct arc_operand_value { | |
| char *name; /* eg: "eq" */ | |
| short value; /* eg: 1 */ | |
| unsigned char type; /* index into `arc_operands' */ | |
| unsigned char flags; /* various flag bits */ | |
| /* Values for `flags'. */ | |
| /* Return CPU number, given flag bits. */ | |
| #define ARC_OPVAL_CPU(bits) ((bits) & ARC_MACH_CPU_MASK) | |
| /* Return MACH number, given flag bits. */ | |
| #define ARC_OPVAL_MACH(bits) ((bits) & ARC_MACH_MASK) | |
| }; | |
| struct arc_ext_operand_value { | |
| struct arc_ext_operand_value *next; | |
| struct arc_operand_value operand; | |
| }; | |
| /* List of extension condition codes, core registers and auxiliary registers. | |
| Calls to gas/config/tc-arc.c:arc_extoper built up this list. */ | |
| extern struct arc_ext_operand_value *arc_ext_operands; | |
| struct arc_operand { | |
| /* One of the insn format chars. */ | |
| unsigned char fmt; | |
| /* The number of bits in the operand (may be unused for a modifier). */ | |
| unsigned char bits; | |
| /* How far the operand is left shifted in the instruction, or | |
| the modifier's flag bit (may be unused for a modifier. */ | |
| unsigned char shift; | |
| /* Various flag bits. */ | |
| int flags; | |
| /* Values for `flags'. */ | |
| /* This operand is a suffix to the opcode. */ | |
| #define ARC_OPERAND_SUFFIX 1 | |
| /* This operand is a relative branch displacement. The disassembler | |
| prints these symbolically if possible. */ | |
| #define ARC_OPERAND_RELATIVE_BRANCH 2 | |
| /* This operand is an absolute branch address. The disassembler | |
| prints these symbolically if possible. */ | |
| #define ARC_OPERAND_ABSOLUTE_BRANCH 4 | |
| /* This operand is an address. The disassembler | |
| prints these symbolically if possible. */ | |
| #define ARC_OPERAND_ADDRESS 8 | |
| /* This operand is a long immediate value. */ | |
| #define ARC_OPERAND_LIMM 0x10 | |
| /* This operand takes signed values. */ | |
| #define ARC_OPERAND_SIGNED 0x20 | |
| /* This operand takes signed values, but also accepts a full positive | |
| range of values. That is, if bits is 16, it takes any value from | |
| -0x8000 to 0xffff. */ | |
| #define ARC_OPERAND_SIGNOPT 0x40 | |
| /* This operand should be regarded as a negative number for the | |
| purposes of overflow checking (i.e., the normal most negative | |
| number is disallowed and one more than the normal most positive | |
| number is allowed). This flag will only be set for a signed | |
| operand. */ | |
| #define ARC_OPERAND_NEGATIVE 0x80 | |
| /* This operand doesn't really exist. The program uses these operands | |
| in special ways. */ | |
| #define ARC_OPERAND_FAKE 0x100 | |
| /* separate flags operand for j and jl instructions */ | |
| #define ARC_OPERAND_JUMPFLAGS 0x200 | |
| /* allow warnings and errors to be issued after call to insert_xxxxxx */ | |
| #define ARC_OPERAND_WARN 0x400 | |
| #define ARC_OPERAND_ERROR 0x800 | |
| /* this is a load operand */ | |
| #define ARC_OPERAND_LOAD 0x8000 | |
| /* this is a store operand */ | |
| #define ARC_OPERAND_STORE 0x10000 | |
| /* this is an unsigned operand */ | |
| #define ARC_OPERAND_UNSIGNED 0x20000 | |
| /* this operand's value must be 2-byte aligned */ | |
| #define ARC_OPERAND_2BYTE_ALIGNED 0x40000 | |
| /* this operand's value must be 4-byte aligned */ | |
| #define ARC_OPERAND_4BYTE_ALIGNED 0x80000 | |
| /* Modifier values. */ | |
| /* A dot is required before a suffix. Eg: .le */ | |
| #define ARC_MOD_DOT 0x1000 | |
| /* A normal register is allowed (not used, but here for completeness). */ | |
| #define ARC_MOD_REG 0x2000 | |
| /* An auxiliary register name is expected. */ | |
| #define ARC_MOD_AUXREG 0x4000 | |
| /* This should be a small data symbol, i.e. suffixed with an @sda */ | |
| #define ARC_MOD_SDASYM 0x100000 | |
| /* Sum of all ARC_MOD_XXX bits. */ | |
| #define ARC_MOD_BITS 0x107000 | |
| /* Non-zero if the operand type is really a modifier. */ | |
| #define ARC_MOD_P(X) ((X) & ARC_MOD_BITS) | |
| /* enforce read/write only register restrictions */ | |
| #define ARC_REGISTER_READONLY 0x01 | |
| #define ARC_REGISTER_WRITEONLY 0x02 | |
| #define ARC_REGISTER_NOSHORT_CUT 0x04 | |
| /* Registers which are normally used in 16-bit ARCompact insns */ | |
| #define ARC_REGISTER_16 0x8 | |
| /* | |
| FIXME: The following 5 definitions is a unclean way of passing | |
| information to md_assemble. New opcode is a possibility but its | |
| already very crowded. | |
| */ | |
| /*The u6 operand needs to be incremented by 1 for some pseudo mnemonics of | |
| the BRcc instruction. */ | |
| #define ARC_INCR_U6 0x100000 | |
| #define ARC_SIMD_SCALE1 (ARC_INCR_U6 << 0x1) | |
| #define ARC_SIMD_SCALE2 (ARC_SIMD_SCALE1 << 0x1) | |
| #define ARC_SIMD_SCALE3 (ARC_SIMD_SCALE2 << 0x1) | |
| #define ARC_SIMD_SCALE4 (ARC_SIMD_SCALE3 << 0x1) | |
| #define ARC_SIMD_LANEMASK (ARC_SIMD_SCALE4 <<0x1) | |
| #define ARC_SIMD_REGISTER (ARC_SIMD_LANEMASK <<0x1) | |
| #define ARC_SIMD_ZERVA (ARC_SIMD_REGISTER <<0x1) | |
| #define ARC_SIMD_ZERVB (ARC_SIMD_ZERVA <<0x1) | |
| #define ARC_SIMD_ZERVC (ARC_SIMD_ZERVB <<0x1) | |
| #define ARC_SIMD_SETLM (ARC_SIMD_ZERVC <<0x1) | |
| /* Registers for the Aurora SIMD ISA*/ | |
| #define ARC_REGISTER_SIMD_VR 0x10 | |
| #define ARC_REGISTER_SIMD_I 0x20 | |
| #define ARC_REGISTER_SIMD_DR 0x40 | |
| #define ARC_REGISTER_SIMD_K 0x80 | |
| /* Insertion function. This is used by the assembler. To insert an | |
| operand value into an instruction, check this field. | |
| If it is NULL, execute | |
| i |= (p & ((1 << o->bits) - 1)) << o->shift; | |
| (I is the instruction which we are filling in, O is a pointer to | |
| this structure, and OP is the opcode value; this assumes twos | |
| complement arithmetic). | |
| If this field is not NULL, then simply call it with the | |
| instruction and the operand value. It will return the new value | |
| of the instruction. If the ERRMSG argument is not NULL, then if | |
| the operand value is illegal, *ERRMSG will be set to a warning | |
| string (the operand will be inserted in any case). If the | |
| operand value is legal, *ERRMSG will be unchanged. | |
| REG is non-NULL when inserting a register value. | |
| extend is only meaningful for extended length instructions | |
| and the special fields that use them. | |
| */ | |
| arc_insn (*insert) (arc_insn insn, long *extend, const struct arc_operand *operand, | |
| int mods, const struct arc_operand_value *reg, | |
| long value, const char **errmsg); | |
| /* Extraction function. This is used by the disassembler. To | |
| extract this operand type from an instruction, check this field. | |
| If it is NULL, compute | |
| op = ((i) >> o->shift) & ((1 << o->bits) - 1); | |
| if ((o->flags & ARC_OPERAND_SIGNED) != 0 | |
| && (op & (1 << (o->bits - 1))) != 0) | |
| op -= 1 << o->bits; | |
| (I is the instruction, O is a pointer to this structure, and OP | |
| is the result; this assumes twos complement arithmetic). | |
| If this field is not NULL, then simply call it with the | |
| instruction value. It will return the value of the operand. If | |
| the INVALID argument is not NULL, *INVALID will be set to | |
| non-zero if this operand type can not actually be extracted from | |
| this operand (i.e., the instruction does not match). If the | |
| operand is valid, *INVALID will not be changed. | |
| INSN is a pointer to an array of two `arc_insn's. The first element is | |
| the insn, the second is the limm if present. | |
| Operands that have a printable form like registers and suffixes have | |
| their struct arc_operand_value pointer stored in OPVAL. */ | |
| long (*extract) (arc_insn *insn, | |
| const struct arc_operand *operand, int mods, | |
| const struct arc_operand_value **opval, int *invalid); | |
| }; | |
| /* Bits that say what version of cpu we have. | |
| These should be passed to arc_init_opcode_tables. | |
| At present, all there is is the cpu type. */ | |
| /* CPU number, given value passed to `arc_init_opcode_tables'. */ | |
| #define ARC_HAVE_CPU(bits) ((bits) & ARC_MACH_CPU_MASK) | |
| /* MACH number, given value passed to `arc_init_opcode_tables'. */ | |
| #define ARC_HAVE_MACH(bits) ((bits) & ARC_MACH_MASK) | |
| /* Special register values: */ | |
| #define ARC_REG_SHIMM_UPDATE 61 | |
| #define ARC_REG_SHIMM 63 | |
| #define ARC_REG_LIMM 62 | |
| /* Non-zero if REG is a constant marker. */ | |
| #define ARC_REG_CONSTANT_P(REG) ((REG) >= 61) | |
| /* Positions and masks of various fields: */ | |
| #define ARC_SHIFT_REGA 21 | |
| #define ARC_SHIFT_REGB 15 | |
| #define ARC_SHIFT_REGC 9 | |
| #define ARC_SHIFT_REGA_AC 0 | |
| #define ARC_SHIFT_REGB_LOW_AC 24 | |
| #define ARC_SHIFT_REGB_HIGH_AC 12 | |
| #define ARC_SHIFT_REGC_AC 6 | |
| #define ARC_MASK_REG 63 | |
| /* Delay slot types. */ | |
| #define ARC_DELAY_NONE 0 /* no delay slot */ | |
| #define ARC_DELAY_NORMAL 1 /* delay slot in both cases */ | |
| #define ARC_DELAY_JUMP 2 /* delay slot only if branch taken */ | |
| /* Non-zero if X will fit in a signed 9 bit field. */ | |
| #define ARC_SHIMM_CONST_P(x) ((long) (x) >= -256 && (long) (x) <= 255) | |
| extern const struct arc_operand *arc_operands; | |
| extern int arc_operand_count; | |
| extern const struct arc_operand_value *arc_suffixes; | |
| extern int arc_suffixes_count; | |
| extern const struct arc_operand_value *arc_reg_names; | |
| extern int arc_reg_names_count; | |
| extern unsigned char *arc_operand_map; | |
| /* Nonzero if we've seen a 'q' suffix (condition code). | |
| * 'Q' FORCELIMM set `arc_cond_p' to 1 to ensure a constant is a limm */ | |
| extern int arc_cond_p; | |
| extern int arc_mach_a4; | |
| extern unsigned long arc_ld_ext_mask; | |
| extern int arc_user_mode_only; | |
| /* Utility fns in arc-opc.c. */ | |
| int arc_get_opcode_mach (int, int); | |
| /* `arc_opcode_init_tables' must be called before `arc_xxx_supported'. */ | |
| void arc_opcode_init_tables (int); | |
| void arc_opcode_init_insert (void); | |
| void arc_opcode_init_extract (void); | |
| const struct arc_opcode *arc_opcode_lookup_asm (const char *); | |
| const struct arc_opcode *arc_opcode_lookup_dis (unsigned int); | |
| int arc_opcode_limm_p (long *); | |
| const struct arc_operand_value *arc_opcode_lookup_suffix (const struct arc_operand *type, int value); | |
| int arc_opcode_supported (const struct arc_opcode *); | |
| int arc_opval_supported (const struct arc_operand_value *); | |
| int arc_insn_not_jl (arc_insn); | |
| extern char *arc_aux_reg_name (int); | |
| extern struct arc_operand_value *get_ext_suffix (char *,char); | |
| extern int ac_branch_or_jump_insn (arc_insn, int); | |
| extern int ac_lpcc_insn (arc_insn); | |
| extern int ac_constant_operand (const struct arc_operand *); | |
| extern int ac_register_operand (const struct arc_operand *); | |
| extern int ac_symbol_operand (const struct arc_operand *); | |
| extern int ARC700_register_simd_operand (char); | |
| extern int arc_operand_type (int); | |
| extern int ac_add_reg_sdasym_insn (arc_insn); | |
| extern int ac_get_load_sdasym_insn_type (arc_insn, int); | |
| extern int ac_get_store_sdasym_insn_type (arc_insn, int); | |
| extern int arc_limm_fixup_adjust (arc_insn); |