| # | |
| # Unusual variables checked by this code: | |
| # NOP - four byte opcode for no-op (defaults to 0) | |
| # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start | |
| # OTHER_READONLY_SECTIONS - other than .text .init .ctors .rodata ... | |
| # (e.g., .PARISC.milli) | |
| # OTHER_READWRITE_SECTIONS - other than .data .bss .sdata ... | |
| # (e.g., .PARISC.global) | |
| # OTHER_SECTIONS - at the end | |
| # EXECUTABLE_SYMBOLS - symbols that must be defined for an | |
| # executable (e.g., _DYNAMIC_LINK) | |
| # TEXT_START_SYMBOLS - symbols that appear at the start of the | |
| # .text section. | |
| # DATA_START_SYMBOLS - symbols that appear at the start of the | |
| # .data section. | |
| # OTHER_BSS_SYMBOLS - symbols that appear at the start of the | |
| # .bss section besides __bss_start. | |
| # DATA_PLT - .plt should be in data segment, not text segment. | |
| # | |
| # When adding sections, do note that the names of some sections are used | |
| # when specifying the start address of the next. | |
| # | |
| test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
| test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
| test "$LD_FLAG" = "N" && DATA_ADDR=. | |
| INTERP=".interp ${RELOCATING-0} : { *(.interp) }" | |
| PLT=".plt ${RELOCATING-0} : { *(.plt) }" | |
| cat <<EOF | |
| OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", | |
| "${LITTLE_OUTPUT_FORMAT}") | |
| OUTPUT_ARCH(${ARCH}) | |
| ${RELOCATING+${LIB_SEARCH_DIRS}} | |
| ${RELOCATING+/* Do we need any of these for elf? | |
| __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} | |
| ${RELOCATING+${EXECUTABLE_SYMBOLS}} | |
| ${RELOCATING- /* For some reason, the Solaris linker makes bad executables | |
| if gld -r is used and the intermediate file has sections starting | |
| at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld | |
| bug. But for now assigning the zero vmas works. */} | |
| SECTIONS | |
| { | |
| /* Read-only sections, merged into text segment: */ | |
| ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_START_ADDR} + SIZEOF_HEADERS;}} | |
| ${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}} | |
| ${CREATE_SHLIB-${INTERP}} | |
| .hash ${RELOCATING-0} : { *(.hash) } | |
| .dynsym ${RELOCATING-0} : { *(.dynsym) } | |
| .dynstr ${RELOCATING-0} : { *(.dynstr) } | |
| .rel.text ${RELOCATING-0} : { *(.rel.text) } | |
| .rela.text ${RELOCATING-0} : { *(.rela.text) } | |
| .rel.data ${RELOCATING-0} : { *(.rel.data) } | |
| .rela.data ${RELOCATING-0} : { *(.rela.data) } | |
| .rel.rodata ${RELOCATING-0} : { *(.rel.rodata) } | |
| .rela.rodata ${RELOCATING-0} : { *(.rela.rodata) } | |
| .rel.got ${RELOCATING-0} : { *(.rel.got) } | |
| .rela.got ${RELOCATING-0} : { *(.rela.got) } | |
| .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } | |
| .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } | |
| .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } | |
| .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } | |
| .rel.bss ${RELOCATING-0} : { *(.rel.bss) } | |
| .rela.bss ${RELOCATING-0} : { *(.rela.bss) } | |
| .rel.plt ${RELOCATING-0} : { *(.rel.plt) } | |
| .rela.plt ${RELOCATING-0} : { *(.rela.plt) } | |
| .init ${RELOCATING-0} : { *(.init) } =${NOP-0} | |
| ${DATA_PLT-${PLT}} | |
| .text ${RELOCATING-0} : | |
| { | |
| ${RELOCATING+${TEXT_START_SYMBOLS}} | |
| *(.text) | |
| ${CONSTRUCTING+ __CTOR_LIST__ = .;} | |
| ${CONSTRUCTING+ LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)} | |
| ${CONSTRUCTING+ *(.ctors)} | |
| ${CONSTRUCTING+ LONG(0)} | |
| ${CONSTRUCTING+ __CTOR_END__ = .;} | |
| ${CONSTRUCTING+ __DTOR_LIST__ = .;} | |
| ${CONSTRUCTING+ LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)} | |
| ${CONSTRUCTING+ *(.dtors)} | |
| ${CONSTRUCTING+ LONG(0)} | |
| ${CONSTRUCTING+ __DTOR_END__ = .;} | |
| } | |
| ${RELOCATING+_etext = .;} | |
| ${RELOCATING+PROVIDE (etext = .);} | |
| .fini ${RELOCATING-0} : { *(.fini) } =${NOP-0} | |
| .ctors ${RELOCATING-0} : { *(.ctors) } | |
| .dtors ${RELOCATING-0} : { *(.dtors) } | |
| .rodata ${RELOCATING-0} : { *(.rodata) } | |
| .rodata1 ${RELOCATING-0} : { *(.rodata1) } | |
| ${OTHER_READONLY_SECTIONS} | |
| /* Read-write section, merged into data segment: */ | |
| ${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};} | |
| .data ${RELOCATING-0} : | |
| { | |
| ${RELOCATING+${DATA_START_SYMBOLS}} | |
| *(.data) | |
| ${CONSTRUCTING+CONSTRUCTORS} | |
| } | |
| .data1 ${RELOCATING-0} : { *(.data1) } | |
| ${OTHER_READWRITE_SECTIONS} | |
| .got ${RELOCATING-0} : { *(.got.plt) *(.got) } | |
| .dynamic ${RELOCATING-0} : { *(.dynamic) } | |
| ${DATA_PLT+${PLT}} | |
| /* We want the small data sections together, so single-instruction offsets | |
| can access them all, and initialized data all before uninitialized, so | |
| we can shorten the on-disk segment size. */ | |
| .sdata ${RELOCATING-0} : { *(.sdata) } | |
| ${RELOCATING+_edata = .;} | |
| ${RELOCATING+PROVIDE (edata = .);} | |
| ${RELOCATING+__bss_start = .;} | |
| ${RELOCATING+${OTHER_BSS_SYMBOLS}} | |
| .sbss ${RELOCATING-0} : { *(.sbss) *(.scommon) } | |
| .bss ${RELOCATING-0} : | |
| { | |
| *(.dynbss) | |
| *(.bss) | |
| *(COMMON) | |
| } | |
| ${RELOCATING+_end = . ;} | |
| ${RELOCATING+PROVIDE (end = .);} | |
| /* These are needed for ELF backends which have not yet been | |
| converted to the new style linker. */ | |
| .stab 0 : { *(.stab) } | |
| .stabstr 0 : { *(.stabstr) } | |
| ${OTHER_SECTIONS} | |
| } | |
| EOF |