| #!/bin/sh | |
| ### WARNING: this file contains embedded tabs. Do not run untabify on this file. | |
| # Configuration script | |
| # Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 1997 | |
| # Free Software Foundation, Inc. | |
| # This program is free software; you can redistribute it and/or modify | |
| # it under the terms of the GNU General Public License as published by | |
| # the Free Software Foundation; either version 2 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # This program is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| # GNU General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with this program; if not, write to the Free Software | |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| # This file was originally written by K. Richard Pixley. | |
| # | |
| # Shell script to create proper links to machine-dependent files in | |
| # preparation for compilation. | |
| # | |
| # If configure succeeds, it leaves its status in config.status. | |
| # If configure fails after disturbing the status quo, | |
| # config.status is removed. | |
| # | |
| export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$) | |
| remove=rm | |
| hard_link=ln | |
| symbolic_link='ln -s' | |
| #for Test | |
| #remove="echo rm" | |
| #hard_link="echo ln" | |
| #symbolic_link="echo ln -s" | |
| # clear some things potentially inherited from environment. | |
| Makefile=Makefile | |
| Makefile_in=Makefile.in | |
| arguments= | |
| build_alias= | |
| cache_file=config.cache | |
| cache_file_option= | |
| configdirs= | |
| extraconfigdirs= | |
| diroptions= | |
| exec_prefix= | |
| exec_prefixoption= | |
| fatal= | |
| floating_point=default | |
| gas=default | |
| gcc_version= | |
| gcc_version_trigger= | |
| host_alias=NOHOST | |
| host_makefile_frag= | |
| moveifchange= | |
| norecursion= | |
| other_options= | |
| package_makefile_frag= | |
| package_makefile_rules_frag= | |
| prefix=/usr/local | |
| progname= | |
| program_prefix= | |
| program_prefixoption= | |
| program_suffix= | |
| program_suffixoption= | |
| program_transform_name= | |
| program_transform_nameoption= | |
| redirect= | |
| removing= | |
| site= | |
| site_makefile_frag= | |
| site_option= | |
| srcdir= | |
| srctrigger= | |
| subdirs= | |
| target_alias=NOTARGET | |
| target_makefile_frag= | |
| undefs=NOUNDEFS | |
| version="$Revision$" | |
| x11=default | |
| bindir='${exec_prefix}/bin' | |
| sbindir='${exec_prefix}/sbin' | |
| libexecdir='${exec_prefix}/libexec' | |
| datadir='${prefix}/share' | |
| sysconfdir='${prefix}/etc' | |
| sharedstatedir='${prefix}/com' | |
| localstatedir='${prefix}/var' | |
| libdir='${exec_prefix}/lib' | |
| includedir='${prefix}/include' | |
| oldincludedir='/usr/include' | |
| infodir='${prefix}/info' | |
| mandir='${prefix}/man' | |
| ### we might need to use some other shell than /bin/sh for running subshells | |
| ### If we are on Windows, search for the shell. This will permit people | |
| ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure | |
| ### without also having to set CONFIG_SHELL. This code will work when | |
| ### using bash, which sets OSTYPE. | |
| case "${OSTYPE}" in | |
| *win32*) | |
| if [ x${CONFIG_SHELL} = x ]; then | |
| if [ ! -f /bin/sh ]; then | |
| if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then | |
| CONFIG_SHELL=${SHELL} | |
| export CONFIG_SHELL | |
| else | |
| for prog in sh sh.exe bash bash.exe; do | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/$prog; then | |
| CONFIG_SHELL=$dir/$prog | |
| export CONFIG_SHELL | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| test -n "${CONFIG_SHELL}" && break | |
| done | |
| fi | |
| fi | |
| fi | |
| ;; | |
| esac | |
| config_shell=${CONFIG_SHELL-/bin/sh} | |
| NO_EDIT="This file was generated automatically by configure. Do not edit." | |
| ## this is a little touchy and won't always work, but... | |
| ## | |
| ## if the argv[0] starts with a slash then it is an absolute name that can (and | |
| ## must) be used as is. | |
| ## | |
| ## otherwise, if argv[0] has no slash in it, we can assume that it is on the | |
| ## path. Since PATH might include "." we also add `pwd` to the end of PATH. | |
| ## | |
| progname=$0 | |
| # if PWD already has a value, it is probably wrong. | |
| if [ -n "$PWD" ]; then PWD=`pwd`; fi | |
| case "${progname}" in | |
| /*) ;; | |
| */*) ;; | |
| *) | |
| PATH=$PATH:${PWD=`pwd`} ; export PATH | |
| ;; | |
| esac | |
| # Loop over all args | |
| while : | |
| do | |
| # Break out if there are no more args | |
| case $# in | |
| 0) | |
| break | |
| ;; | |
| esac | |
| # Get the first arg, and shuffle | |
| option=$1 | |
| shift | |
| # Make all options have two hyphens | |
| orig_option=$option # Save original for error messages | |
| case $option in | |
| --*) ;; | |
| -*) option=-$option ;; | |
| esac | |
| # Split out the argument for options that take them | |
| case $option in | |
| --*=*) | |
| optarg=`echo $option | sed -e 's/^[^=]*=//'` | |
| arguments="$arguments $option" | |
| ;; | |
| # These options have mandatory values. Since we didn't find an = sign, | |
| # the value must be in the next argument | |
| --bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*) | |
| optarg=$1 | |
| shift | |
| arguments="$arguments $option=$optarg" | |
| ;; | |
| --v) | |
| arguments="$arguments -v" | |
| ;; | |
| --*) | |
| arguments="$arguments $option" | |
| ;; | |
| esac | |
| # Now, process the options | |
| case $option in | |
| --bi*) | |
| bindir=$optarg | |
| diroptions="$diroptions --bindir=$optarg" | |
| ;; | |
| --build* | --bu*) | |
| case "$build_alias" in | |
| "") build_alias=$optarg ;; | |
| *) echo '***' Can only configure for one build machine at a time. 1>&2 | |
| fatal=yes | |
| ;; | |
| esac | |
| ;; | |
| --cache*) | |
| cache_file=$optarg | |
| ;; | |
| --da*) | |
| datadir=$optarg | |
| diroptions="$diroptions --datadir=$optarg" | |
| ;; | |
| --disable-*) | |
| enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'` | |
| eval $enableopt=no | |
| disableoptions="$disableoptions $option" | |
| ;; | |
| --enable-*) | |
| case "$option" in | |
| *=*) ;; | |
| *) optarg=yes ;; | |
| esac | |
| enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` | |
| eval "$enableopt='$optarg'" | |
| enableoptions="$enableoptions '$option'" | |
| ;; | |
| --exec-prefix* | --ex*) | |
| exec_prefix=$optarg | |
| exec_prefixoption="--exec-prefix=$optarg" | |
| ;; | |
| --gas | --g*) | |
| gas=yes | |
| ;; | |
| --help | --he*) | |
| fatal=yes | |
| ;; | |
| --host* | --ho*) | |
| case $host_alias in | |
| NOHOST) host_alias=$optarg ;; | |
| *) echo '***' Can only configure for one host at a time. 1>&2 | |
| fatal=yes | |
| ;; | |
| esac | |
| ;; | |
| --inc*) | |
| includedir=$optarg | |
| diroptions="$diroptions --includedir=$optarg" | |
| ;; | |
| --inf*) | |
| infodir=$optarg | |
| diroptions="$diroptions --infodir=$optarg" | |
| ;; | |
| --libd*) | |
| libdir=$optarg | |
| diroptions="$diroptions --libdir=$optarg" | |
| ;; | |
| --libe*) | |
| libexecdir=$optarg | |
| diroptions="$diroptions --libexecdir=$optarg" | |
| ;; | |
| --lo*) | |
| localstatedir=$optarg | |
| diroptions="$diroptions --localstatedir=$optarg" | |
| ;; | |
| --ma*) | |
| mandir=$optarg | |
| diroptions="$diroptions --mandir=$optarg" | |
| ;; | |
| --nfp | --nf*) | |
| floating_point=no | |
| floating_pointoption="--nfp" | |
| ;; | |
| --norecursion | --no*) | |
| norecursion=yes | |
| ;; | |
| --ol*) | |
| oldincludedir=$optarg | |
| diroptions="$diroptions --oldincludedir=$optarg" | |
| ;; | |
| --prefix* | --pre*) | |
| prefix=$optarg | |
| prefixoption="--prefix=$optarg" | |
| ;; | |
| --program-prefix* | --program-p*) | |
| program_prefix=$optarg | |
| program_prefixoption="--program-prefix=$optarg" | |
| ;; | |
| --program-suffix* | --program-s*) | |
| program_suffix=$optarg | |
| program_suffixoption="--program-suffix=$optarg" | |
| ;; | |
| --program-transform-name* | --program-t*) | |
| # Double any backslashes or dollar signs in the argument | |
| program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`" | |
| program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'" | |
| ;; | |
| --rm) | |
| removing=--rm | |
| ;; | |
| --sb*) | |
| sbindir=$optarg | |
| diroptions="$diroptions --sbindir=$optarg" | |
| ;; | |
| --sh*) | |
| sharedstatedir=$optarg | |
| diroptions="$diroptions --sharedstatedir=$optarg" | |
| ;; | |
| --silent | --sil* | --quiet | --q*) | |
| redirect=">/dev/null" | |
| verbose=--silent | |
| ;; | |
| --site* | --sit*) | |
| site=$optarg | |
| site_option="--site=$optarg" | |
| ;; | |
| --srcdir*/ | --sr*/) | |
| # Remove trailing slashes. Otherwise, when the file name gets | |
| # bolted into an object file as debug info, it has two slashes | |
| # in it. Ordinarily this is ok, but emacs takes double slash | |
| # to mean "forget the first part". | |
| srcdir=`echo $optarg | sed -e 's:/$::'` | |
| ;; | |
| --srcdir* | --sr*) | |
| srcdir=$optarg | |
| ;; | |
| --sy*) | |
| sysconfdir=$optarg | |
| diroptions="$diroptions --sysconfdir=$optarg" | |
| ;; | |
| --target* | --ta*) | |
| case $target_alias in | |
| NOTARGET) target_alias=$optarg ;; | |
| *) echo '***' Can only configure for one target at a time. 1>&2 | |
| fatal=yes | |
| ;; | |
| esac | |
| ;; | |
| --tmpdir* | --tm*) | |
| TMPDIR=$optarg | |
| tmpdiroption="--tmpdir=$optarg" | |
| ;; | |
| --verbose | --v | --verb*) | |
| redirect= | |
| verbose=--verbose | |
| ;; | |
| --version | --V | --vers*) | |
| echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'` | |
| exit 0 | |
| ;; | |
| --with-*) | |
| case "$option" in | |
| *=*) ;; | |
| *) optarg=yes ;; | |
| esac | |
| withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` | |
| eval $withopt="$optarg" | |
| withoptions="$withoptions $option" | |
| ;; | |
| --without-*) | |
| withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'` | |
| eval $withopt=no | |
| withoutoptions="$withoutoptions $option" | |
| ;; | |
| --x) with_x=yes | |
| withoptions="$withoptions --with-x" | |
| ;; | |
| --x-i* | --x-l*) other_options="$other_options $orig_option" | |
| ;; | |
| --*) | |
| echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2 | |
| exit 1 | |
| ;; | |
| *) | |
| case $undefs in | |
| NOUNDEFS) undefs=$option ;; | |
| *) echo '***' Can only configure for one host and one target at a time. 1>&2 | |
| fatal=yes | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| done | |
| # process host and target | |
| # Do some error checking and defaulting for the host and target type. | |
| # The inputs are: | |
| # configure --host=HOST --target=TARGET UNDEFS | |
| # | |
| # The rules are: | |
| # 1. You aren't allowed to specify --host, --target, and undefs at the | |
| # same time. | |
| # 2. Host defaults to undefs. | |
| # 3. If undefs is not specified, then host defaults to the current host, | |
| # as determined by config.guess. | |
| # 4. Target defaults to undefs. | |
| # 5. If undefs is not specified, then target defaults to host. | |
| case "${fatal}" in | |
| "") | |
| # Make sure that host, target & undefs aren't all specified at the | |
| # same time. | |
| case $host_alias---$target_alias---$undefs in | |
| NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS) | |
| ;; | |
| *) echo '***' Can only configure for one host and one target at a time. 1>&2 | |
| fatal=yes | |
| break 2 | |
| ;; | |
| esac | |
| # Now, do defaulting for host. | |
| case $host_alias in | |
| NOHOST) | |
| case $undefs in | |
| NOUNDEFS) | |
| # Neither --host option nor undefs were present. | |
| # Call config.guess. | |
| guesssys=`echo ${progname} | sed 's/configure$/config.guess/'` | |
| if host_alias=`${config_shell} ${guesssys}` | |
| then | |
| # If the string we are going to use for | |
| # the target is a prefix of the string | |
| # we just guessed for the host, then | |
| # assume we are running native, and force | |
| # the same string for both target and host. | |
| case $target_alias in | |
| NOTARGET) ;; | |
| *) | |
| if expr $host_alias : $target_alias >/dev/null | |
| then | |
| host_alias=$target_alias | |
| fi | |
| ;; | |
| esac | |
| echo "Configuring for a ${host_alias} host." 1>&2 | |
| arguments="--host=$host_alias $arguments" | |
| else | |
| echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2 | |
| fatal=yes | |
| fi | |
| ;; | |
| *) | |
| host_alias=$undefs | |
| arguments="--host=$host_alias $arguments" | |
| undefs=NOUNDEFS | |
| ;; | |
| esac | |
| esac | |
| # Do defaulting for target. If --target option isn't present, default | |
| # to undefs. If undefs isn't present, default to host. | |
| case $target_alias in | |
| NOTARGET) | |
| case $undefs in | |
| NOUNDEFS) | |
| target_alias=$host_alias | |
| ;; | |
| *) | |
| target_alias=$undefs | |
| arguments="--target=$target_alias $arguments" | |
| ;; | |
| esac | |
| esac | |
| ;; | |
| *) ;; | |
| esac | |
| if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then | |
| exec 1>&2 | |
| echo Usage: configure [OPTIONS] [HOST] | |
| echo | |
| echo Options: [defaults in brackets] | |
| echo ' --prefix=MYDIR install into MYDIR [/usr/local]' | |
| echo ' --exec-prefix=MYDIR install host-dependent files into MYDIR [/usr/local]' | |
| echo ' --help print this message [normal config]' | |
| echo ' --build=BUILD configure for building on BUILD [BUILD=HOST]' | |
| echo ' --host=HOST configure for HOST [determined via config.guess]' | |
| echo ' --norecursion configure this directory only [recurse]' | |
| echo ' --program-prefix=FOO prepend FOO to installed program names [""]' | |
| echo ' --program-suffix=FOO append FOO to installed program names [""]' | |
| echo ' --program-transform-name=P transform installed names by sed pattern P [""]' | |
| echo ' --site=SITE configure with site-specific makefile for SITE' | |
| echo ' --srcdir=DIR find the sources in DIR [. or ..]' | |
| echo ' --target=TARGET configure for TARGET [TARGET=HOST]' | |
| echo ' --tmpdir=TMPDIR create temporary files in TMPDIR [/tmp]' | |
| echo ' --nfp configure for software floating point [hard float]' | |
| echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)' | |
| echo ' --without-FOO package FOO is NOT available' | |
| echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)' | |
| echo ' --disable-FOO do not include feature FOO' | |
| echo | |
| echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.' | |
| echo | |
| if [ -r config.status ] ; then | |
| cat config.status | |
| fi | |
| exit 1 | |
| fi | |
| configsub=`echo ${progname} | sed 's/configure$/config.sub/'` | |
| moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'` | |
| topsrcdir=`cd \`dirname ${progname}\`; pwd` | |
| # this is a hack. sun4 must always be a valid host alias or this will fail. | |
| if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then | |
| true | |
| else | |
| echo '***' cannot find config.sub. 1>&2 | |
| exit 1 | |
| fi | |
| touch config.junk | |
| if ${config_shell} ${moveifchange} config.junk config.trash ; then | |
| true | |
| else | |
| echo '***' cannot find move-if-change. 1>&2 | |
| exit 1 | |
| fi | |
| rm -f config.junk config.trash | |
| case "${srcdir}" in | |
| "") | |
| if [ -r configure.in ] ; then | |
| srcdir=. | |
| else | |
| if [ -r ${progname}.in ] ; then | |
| srcdir=`echo ${progname} | sed 's:/configure$::'` | |
| else | |
| echo '***' "Can't find configure.in. Try using --srcdir=some_dir" 1>&2 | |
| exit 1 | |
| fi | |
| fi | |
| ;; | |
| *) | |
| # Set srcdir to "." if that's what it is. | |
| # This is important for multilib support. | |
| if [ ! -d ${srcdir} ] ; then | |
| echo "Invalid source directory ${srcdir}" >&2 | |
| exit 1 | |
| fi | |
| pwd=`pwd` | |
| srcpwd=`cd ${srcdir} ; pwd` | |
| if [ "${pwd}" = "${srcpwd}" ] ; then | |
| srcdir=. | |
| fi | |
| esac | |
| ### warn about some conflicting configurations. | |
| case "${srcdir}" in | |
| ".") ;; | |
| *) | |
| if [ -f ${srcdir}/config.status ] ; then | |
| echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2 | |
| exit 1 | |
| fi | |
| esac | |
| # default exec_prefix | |
| case "${exec_prefixoption}" in | |
| "") exec_prefix="\$(prefix)" ;; | |
| *) ;; | |
| esac | |
| # Define the trigger file to make sure configure will re-run whenever | |
| # the gcc version number changes. | |
| if [ "${with_gcc_version_trigger+set}" = set ]; then | |
| gcc_version_trigger="$with_gcc_version_trigger" | |
| gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${with_gcc_version_trigger}` | |
| else | |
| # If gcc's sources are available, define the trigger file. | |
| if [ -f ${topsrcdir}/gcc/version.c ] ; then | |
| gcc_version_trigger=${topsrcdir}/gcc/version.c | |
| gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}` | |
| case "$arguments" in | |
| *--with-gcc-version-trigger=$gcc_version_trigger* ) | |
| ;; | |
| * ) | |
| # Make sure configure.in knows about this. | |
| arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments" | |
| ;; | |
| esac | |
| withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions" | |
| fi | |
| fi | |
| ### break up ${srcdir}/configure.in. | |
| case "`grep '^# per\-host:' ${srcdir}/configure.in`" in | |
| "") | |
| echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2 | |
| # Check for a directory that's been converted to use autoconf since | |
| # it was last configured. | |
| if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then | |
| echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2 | |
| if [ -r ${srcdir}/configure ] ; then | |
| echo '***' Running the local configure script. 1>&2 | |
| case "${cache_file}" in | |
| "") cache_file_option= ;; | |
| *) cache_file_option="--cache-file=${cache_file}" ;; | |
| esac | |
| srcdiroption="--srcdir=${srcdir}" | |
| case "${build_alias}" in | |
| "") buildopt= ;; | |
| *) buildopt="--build=${build_alias}" ;; | |
| esac | |
| eval exec ${config_shell} ${srcdir}/configure ${verbose} \ | |
| ${buildopt} --host=${host_alias} --target=${target_alias} \ | |
| ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \ | |
| ${srcdiroption} ${diroptions} \ | |
| ${program_prefixoption} ${program_suffixoption} \ | |
| ${program_transform_nameoption} ${site_option} \ | |
| ${withoptions} ${withoutoptions} \ | |
| ${enableoptions} ${disableoptions} ${floating_pointoption} \ | |
| ${cache_file_option} ${removing} ${other_options} ${redirect} | |
| else | |
| echo '***' There is no configure script present though. 1>&2 | |
| fi | |
| fi | |
| exit 1 | |
| ;; | |
| *) ;; | |
| esac | |
| case "`grep '^# per\-target:' ${srcdir}/configure.in`" in | |
| "") | |
| echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2 | |
| exit 1 | |
| ;; | |
| *) ;; | |
| esac | |
| case "${TMPDIR}" in | |
| "") TMPDIR=/tmp ; export TMPDIR ;; | |
| *) ;; | |
| esac | |
| # keep this filename short for &%*%$*# 14 char file names | |
| tmpfile=${TMPDIR}/cONf$$ | |
| # Note that under many versions of sh a trap handler for 0 will *override* any | |
| # exit status you explicitly specify! At this point, the only non-error exit | |
| # is at the end of the script; these actions are duplicated there, minus | |
| # the "exit 1". Don't use "exit 0" anywhere after this without resetting the | |
| # trap handler, or you'll lose. | |
| trap "rm -f Makefile.tem ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos; exit 1" 0 1 2 15 | |
| # split ${srcdir}/configure.in into common, per-host, per-target, | |
| # and post-target parts. Post-target is optional. | |
| sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com | |
| sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst | |
| if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then | |
| sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt | |
| sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos | |
| else | |
| sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt | |
| echo >${tmpfile}.pos | |
| fi | |
| ### do common part of configure.in | |
| # If the language specific compiler does not exist, but the "gcc" directory does, | |
| # we will skip this directory; in this case the sub-directory's common part | |
| # of configure.in will create a small shell script "skip-this-dir" containing | |
| # commands to completely clean up any temporary or created files. | |
| . ${tmpfile}.com | |
| if test -f skip-this-dir; then | |
| # Perform the same cleanup as the trap handler, minus the "exit 1" of course, | |
| # and reset the trap handler. | |
| trap 0 | |
| rm -f Makefile* ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos | |
| # Execute the final clean-up actions | |
| ${config_shell} skip-this-dir | |
| # and stop configuring this directory. | |
| exit 0 | |
| fi | |
| # some sanity checks on configure.in | |
| case "${srctrigger}" in | |
| "") | |
| echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in. 1>&2 | |
| exit 1 | |
| ;; | |
| *) ;; | |
| esac | |
| case "${build_alias}" in | |
| "") | |
| if result=`${config_shell} ${configsub} ${host_alias}` ; then | |
| build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` | |
| build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` | |
| build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` | |
| build=${build_cpu}-${build_vendor}-${build_os} | |
| build_alias=${host_alias} | |
| fi | |
| ;; | |
| *) | |
| if result=`${config_shell} ${configsub} ${build_alias}` ; then | |
| buildopt="--build=${build_alias}" | |
| build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` | |
| build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` | |
| build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` | |
| build=${build_cpu}-${build_vendor}-${build_os} | |
| else | |
| echo "Unrecognized build system name ${build_alias}." 1>&2 | |
| exit 1 | |
| fi | |
| ;; | |
| esac | |
| if result=`${config_shell} ${configsub} ${host_alias}` ; then | |
| true | |
| else | |
| echo "Unrecognized host system name ${host_alias}." 1>&2 | |
| exit 1 | |
| fi | |
| host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` | |
| host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` | |
| host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` | |
| host=${host_cpu}-${host_vendor}-${host_os} | |
| . ${tmpfile}.hst | |
| if result=`${config_shell} ${configsub} ${target_alias}` ; then | |
| true | |
| else | |
| echo "Unrecognized target system name ${target_alias}." 1>&2 | |
| exit 1 | |
| fi | |
| target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` | |
| target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` | |
| target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` | |
| target=${target_cpu}-${target_vendor}-${target_os} | |
| . ${tmpfile}.tgt | |
| # Find the source files, if location was not specified. | |
| case "${srcdir}" in | |
| "") | |
| srcdirdefaulted=1 | |
| srcdir=. | |
| if [ ! -r ${srctrigger} ] ; then | |
| srcdir=.. | |
| fi | |
| ;; | |
| *) ;; | |
| esac | |
| if [ ! -r ${srcdir}/${srctrigger} ] ; then | |
| case "${srcdirdefaulted}" in | |
| "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;; | |
| *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;; | |
| esac | |
| echo '***' \(At least ${srctrigger} is missing.\) 1>&2 | |
| exit 1 | |
| fi | |
| # Some systems (e.g., one of the i386-aix systems the gas testers are | |
| # using) don't handle "\$" correctly, so don't use it here. | |
| tooldir='$(exec_prefix)'/${target_alias} | |
| if [ "${host_alias}" != "${target_alias}" ] ; then | |
| if [ "${program_prefixoption}" = "" ] ; then | |
| if [ "${program_suffixoption}" = "" ] ; then | |
| if [ "${program_transform_nameoption}" = "" ] ; then | |
| program_prefix=${target_alias}- ; | |
| fi | |
| fi | |
| fi | |
| fi | |
| # Merge program_prefix and program_suffix onto program_transform_name. | |
| # (program_suffix used to use $, but it's hard to preserve $ through both | |
| # make and sh.) | |
| if [ "${program_suffix}" != "" ] ; then | |
| program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}" | |
| fi | |
| if [ "${program_prefix}" != "" ] ; then | |
| program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}" | |
| fi | |
| # If CC and CXX are not set in the environment, and the Makefile | |
| # exists, try to extract them from it. This is to handle running | |
| # ./config.status by hand. | |
| if [ -z "${CC}" ] && [ -r Makefile ]; then | |
| sed -n -e ':loop | |
| /\\$/ N | |
| s/\\\n//g | |
| t loop | |
| /^CC[ ]*=/ s/CC[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc | |
| CC=`tail -1 Makefile.cc` | |
| rm -f Makefile.cc | |
| fi | |
| if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then | |
| sed -n -e ':loop | |
| /\\$/ N | |
| s/\\\n//g | |
| t loop | |
| /^CFLAGS[ ]*=/ s/CFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc | |
| CFLAGS=`tail -1 Makefile.cc` | |
| rm -f Makefile.cc | |
| fi | |
| if [ -z "${CXX}" ] && [ -r Makefile ]; then | |
| sed -n -e ':loop | |
| /\\$/ N | |
| s/\\\n//g | |
| t loop | |
| /^CXX[ ]*=/ s/CXX[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc | |
| CXX=`tail -1 Makefile.cc` | |
| rm -f Makefile.cc | |
| fi | |
| if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then | |
| sed -n -e ':loop | |
| /\\$/ N | |
| s/\\\n//g | |
| t loop | |
| /^CXXFLAGS[ ]*=/ s/CXXFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc | |
| CXXFLAGS=`tail -1 Makefile.cc` | |
| rm -f Makefile.cc | |
| fi | |
| # Generate a default definition for YACC. This is used if the makefile can't | |
| # locate bison or byacc in objdir. | |
| for prog in 'bison -y' byacc yacc | |
| do | |
| set dummy $prog; tmp=$2 | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/$tmp; then | |
| DEFAULT_YACC="$prog" | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| test -n "$DEFAULT_YACC" && break | |
| done | |
| # Generate a default definition for M4. This is used if the makefile can't | |
| # locate m4 in objdir. | |
| for prog in gm4 gnum4 m4 | |
| do | |
| set dummy $prog; tmp=$2 | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/$tmp; then | |
| DEFAULT_M4="$prog" | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| test -n "$DEFAULT_M4" && break | |
| done | |
| # Generate a default definition for LEX. This is used if the makefile can't | |
| # locate flex in objdir. | |
| for prog in flex lex | |
| do | |
| set dummy $prog; tmp=$2 | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/$tmp; then | |
| DEFAULT_LEX="$prog" | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| test -n "$DEFAULT_LEX" && break | |
| done | |
| if [ "${build}" != "${host}" ]; then | |
| # If we are doing a Canadian Cross, in which the host and build systems | |
| # are not the same, we set reasonable default values for the tools. | |
| tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD" | |
| tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET" | |
| tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX" | |
| tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM" | |
| tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET" | |
| tools="${tools} WINDRES WINDRES_FOR_TARGET YACC" | |
| for var in ${tools}; do | |
| if [ -z "`eval 'echo $'"${var}"`" ] && [ -r Makefile ]; then | |
| sed -n -e ':loop | |
| /\\$/ N | |
| s/\\\n//g | |
| t loop | |
| /^'"${var}"'[ ]*=/ s/'"${var}"'[ ]*=[ ]*\(.*\)/\1/p' \ | |
| < Makefile > Makefile.v | |
| t=`tail -1 Makefile.v` | |
| if [ -n "${t}" ]; then | |
| eval "${var}='${t}'" | |
| fi | |
| rm -f Makefile.v | |
| fi | |
| done | |
| AR=${AR-${host_alias}-ar} | |
| AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar} | |
| AS=${AS-${host_alias}-as} | |
| AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as} | |
| BISON=${BISON-bison} | |
| CC=${CC-${host_alias}-gcc} | |
| CFLAGS=${CFLAGS-"-g -O2"} | |
| CXX=${CXX-${host_alias}-c++} | |
| CXXFLAGS=${CXXFLAGS-"-g -O2"} | |
| CC_FOR_BUILD=${CC_FOR_BUILD-gcc} | |
| CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc} | |
| CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} | |
| DLLTOOL=${DLLTOOL-${host_alias}-dlltool} | |
| DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool} | |
| GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} | |
| HOST_PREFIX=${build_alias}- | |
| HOST_PREFIX_1=${build_alias}- | |
| LD=${LD-${host_alias}-ld} | |
| LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld} | |
| MAKEINFO=${MAKEINFO-makeinfo} | |
| NM=${NM-${host_alias}-nm} | |
| NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm} | |
| RANLIB=${RANLIB-${host_alias}-ranlib} | |
| RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib} | |
| WINDRES=${WINDRES-${host_alias}-windres} | |
| WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres} | |
| if [ -z "${YACC}" ]; then | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/bison; then | |
| YACC="bison -y" | |
| break | |
| fi | |
| if test -f $dir/byacc; then | |
| YACC=byacc | |
| break | |
| fi | |
| if test -f $dir/yacc; then | |
| YACC=yacc | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| if [ -z "${YACC}" ]; then | |
| YACC="bison -y" | |
| fi | |
| fi | |
| if [ -z "${LEX}" ]; then | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/flex; then | |
| LEX=flex | |
| break | |
| fi | |
| if test -f $dir/lex; then | |
| LEX=lex | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| LEX=${LEX-flex} | |
| fi | |
| # Export variables which autoconf might try to set. | |
| export AS | |
| export AR | |
| export CC_FOR_BUILD | |
| export DLLTOOL | |
| export LD | |
| export NM | |
| export RANLIB | |
| export WINDRES | |
| else | |
| # If CC is still not set, try to get gcc. | |
| if [ -z "${CC}" ]; then | |
| IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" | |
| for dir in $PATH; do | |
| test -z "$dir" && dir=. | |
| if test -f $dir/gcc; then | |
| CC="gcc" | |
| echo 'void f(){}' > conftest.c | |
| if test -z "`${CC} -g -c conftest.c 2>&1`"; then | |
| CFLAGS=${CFLAGS-"-g -O2"} | |
| CXXFLAGS=${CXXFLAGS-"-g -O2"} | |
| else | |
| CFLAGS=${CFLAGS-"-O2"} | |
| CXXFLAGS=${CXXFLAGS-"-O2"} | |
| fi | |
| rm -f conftest* | |
| break | |
| fi | |
| done | |
| IFS="$save_ifs" | |
| CC=${CC-cc} | |
| else | |
| if test -z "${CFLAGS}"; then | |
| # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC | |
| # is set to a version of gcc. | |
| case "${CC}" in | |
| *gcc) | |
| echo 'void f(){}' > conftest.c | |
| if test -z "`${CC} -g -c conftest.c 2>&1`"; then | |
| CFLAGS=${CFLAGS-"-g -O2"} | |
| CXXFLAGS=${CXXFLAGS-"-g -O2"} | |
| else | |
| CFLAGS=${CFLAGS-"-O2"} | |
| CXXFLAGS=${CXXFLAGS-"-O2"} | |
| fi | |
| rm -f conftest* | |
| ;; | |
| esac | |
| fi | |
| fi | |
| CXX=${CXX-"c++"} | |
| CFLAGS=${CFLAGS-"-g"} | |
| CXXFLAGS=${CXXFLAGS-"-g -O2"} | |
| fi | |
| export CC | |
| export CXX | |
| export CFLAGS | |
| export CXXFLAGS | |
| for subdir in . ${subdirs} ; do | |
| # ${subdir} is relative path from . to the directory we're currently | |
| # configuring. | |
| # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed. | |
| invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'` | |
| ### figure out what to do with srcdir | |
| case "${srcdir}" in | |
| ".") # no -srcdir option. We're building in place. | |
| makesrcdir=. ;; | |
| /*) # absolute path | |
| makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'` | |
| ;; | |
| *) # otherwise relative | |
| case "${subdir}" in | |
| .) makesrcdir=${srcdir} ;; | |
| *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;; | |
| esac | |
| ;; | |
| esac | |
| if [ "${subdir}/" != "./" ] ; then | |
| Makefile=${subdir}/Makefile | |
| fi | |
| if [ ! -d ${subdir} ] ; then | |
| if mkdir ${subdir} ; then | |
| true | |
| else | |
| echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2 | |
| exit 1 | |
| fi | |
| fi | |
| case "${removing}" in | |
| "") | |
| case "${subdir}" in | |
| .) ;; | |
| *) eval echo Building in ${subdir} ${redirect} ;; | |
| esac | |
| # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest) | |
| # Set up the list of links to be made. | |
| # ${links} is the list of link names, and ${files} is the list of names to link to. | |
| # Make the links. | |
| configlinks="${links}" | |
| if [ -r ${subdir}/config.status ] ; then | |
| mv -f ${subdir}/config.status ${subdir}/config.back | |
| fi | |
| while [ -n "${files}" ] ; do | |
| # set file to car of files, files to cdr of files | |
| set ${files}; file=$1; shift; files=$* | |
| set ${links}; link=$1; shift; links=$* | |
| if [ ! -r ${srcdir}/${file} ] ; then | |
| if [ ! -r ${file} ] ; then | |
| echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2 | |
| echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2 | |
| exit 1 | |
| else | |
| srcfile=${file} | |
| fi | |
| else | |
| srcfile=${srcdir}/${file} | |
| fi | |
| ${remove} -f ${link} | |
| # Make a symlink if possible, otherwise try a hard link | |
| if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then | |
| true | |
| else | |
| # We need to re-remove the file because Lynx leaves a | |
| # very strange directory there when it fails an NFS symlink. | |
| ${remove} -r -f ${link} | |
| ${hard_link} ${srcfile} ${link} | |
| fi | |
| if [ ! -r ${link} ] ; then | |
| echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2 | |
| exit 1 | |
| fi | |
| echo "Linked \"${link}\" to \"${srcfile}\"." | |
| done | |
| # Create a .gdbinit file which runs the one in srcdir | |
| # and tells GDB to look there for source files. | |
| if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then | |
| case ${srcdir} in | |
| .) ;; | |
| *) cat > ${subdir}/.gdbinit <<EOF | |
| # ${NO_EDIT} | |
| dir ${makesrcdir} | |
| dir . | |
| source ${makesrcdir}/.gdbinit | |
| EOF | |
| ;; | |
| esac | |
| fi | |
| # Install a makefile, and make it set VPATH | |
| # if necessary so that the sources are found. | |
| # Also change its value of srcdir. | |
| # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has | |
| # been somewhat optimized and is perhaps a bit twisty. | |
| # code is order so as to try to sed the smallest input files we know. | |
| # so do these separately because I don't trust the order of sed -e expressions. | |
| # the five makefile fragments MUST end up in the resulting Makefile in this order: | |
| # package macros, target, host, site, and package rules. | |
| if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then | |
| # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem. | |
| rm -f ${subdir}/${Makefile}.tem | |
| case "${package_makefile_rules_frag}" in | |
| "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;; | |
| *) | |
| if [ ! -f ${package_makefile_rules_frag} ] ; then | |
| package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag} | |
| fi | |
| if [ -f ${package_makefile_rules_frag} ] ; then | |
| sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem | |
| else | |
| echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2 | |
| echo '***' is missing in ${PWD=`pwd`}. 1>&2 | |
| cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem | |
| fi | |
| esac | |
| # working copy now in ${Makefile}.tem | |
| # Conditionalize for this site. | |
| rm -f ${Makefile} | |
| case "${site}" in | |
| "") mv ${subdir}/Makefile.tem ${Makefile} ;; | |
| *) | |
| site_makefile_frag=${srcdir}/config/ms-${site} | |
| if [ -f ${site_makefile_frag} ] ; then | |
| sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \ | |
| > ${Makefile} | |
| else | |
| mv ${subdir}/Makefile.tem ${Makefile} | |
| site_makefile_frag= | |
| fi | |
| ;; | |
| esac | |
| # working copy now in ${Makefile} | |
| # Conditionalize the makefile for this host. | |
| rm -f ${subdir}/Makefile.tem | |
| case "${host_makefile_frag}" in | |
| "") mv ${Makefile} ${subdir}/Makefile.tem ;; | |
| *) | |
| if [ ! -f ${host_makefile_frag} ] ; then | |
| host_makefile_frag=${srcdir}/${host_makefile_frag} | |
| fi | |
| if [ -f ${host_makefile_frag} ] ; then | |
| sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem | |
| else | |
| echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2 | |
| echo '***' is missing in ${PWD=`pwd`}. 1>&2 | |
| mv ${Makefile} ${subdir}/Makefile.tem | |
| fi | |
| esac | |
| # working copy now in ${subdir)/Makefile.tem | |
| # Conditionalize the makefile for this target. | |
| rm -f ${Makefile} | |
| case "${target_makefile_frag}" in | |
| "") mv ${subdir}/Makefile.tem ${Makefile} ;; | |
| *) | |
| if [ ! -f ${target_makefile_frag} ] ; then | |
| target_makefile_frag=${srcdir}/${target_makefile_frag} | |
| fi | |
| if [ -f ${target_makefile_frag} ] ; then | |
| sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile} | |
| else | |
| mv ${subdir}/Makefile.tem ${Makefile} | |
| target_makefile_frag= | |
| fi | |
| ;; | |
| esac | |
| # working copy now in ${Makefile} | |
| # Emit the default values of this package's macros. | |
| rm -f ${subdir}/Makefile.tem | |
| case "${package_makefile_frag}" in | |
| "") mv ${Makefile} ${subdir}/Makefile.tem ;; | |
| *) | |
| if [ ! -f ${package_makefile_frag} ] ; then | |
| package_makefile_frag=${srcdir}/${package_makefile_frag} | |
| fi | |
| if [ -f ${package_makefile_frag} ] ; then | |
| sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem | |
| else | |
| echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2 | |
| echo '***' is missing in ${PWD=`pwd`}. 1>&2 | |
| mv ${Makefile} ${subdir}/Makefile.tem | |
| fi | |
| esac | |
| # real copy now in ${subdir}/Makefile.tem | |
| # prepend warning about editting, and a bunch of variables. | |
| rm -f ${Makefile} | |
| cat > ${Makefile} <<EOF | |
| # ${NO_EDIT} | |
| VPATH = ${makesrcdir} | |
| links = ${configlinks} | |
| host_alias = ${host_alias} | |
| host_cpu = ${host_cpu} | |
| host_vendor = ${host_vendor} | |
| host_os = ${host_os} | |
| host_canonical = ${host_cpu}-${host_vendor}-${host_os} | |
| target_alias = ${target_alias} | |
| target_cpu = ${target_cpu} | |
| target_vendor = ${target_vendor} | |
| target_os = ${target_os} | |
| target_canonical = ${target_cpu}-${target_vendor}-${target_os} | |
| EOF | |
| case "${build}" in | |
| "") ;; | |
| *) cat >> ${Makefile} << EOF | |
| build_alias = ${build_alias} | |
| build_cpu = ${build_cpu} | |
| build_vendor = ${build_vendor} | |
| build_os = ${build_os} | |
| build_canonical = ${build_cpu}-${build_vendor}-${build_os} | |
| EOF | |
| esac | |
| case "${package_makefile_frag}" in | |
| "") ;; | |
| /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;; | |
| *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;; | |
| esac | |
| case "${target_makefile_frag}" in | |
| "") ;; | |
| /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;; | |
| *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;; | |
| esac | |
| case "${host_makefile_frag}" in | |
| "") ;; | |
| /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;; | |
| *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;; | |
| esac | |
| if [ "${site_makefile_frag}" != "" ] ; then | |
| echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile} | |
| fi | |
| # record if we want to build shared libs. | |
| if test -z "${enable_shared}"; then | |
| echo enable_shared = no >> ${Makefile} | |
| else | |
| echo enable_shared = ${enable_shared} >> ${Makefile} | |
| fi | |
| # record if we want to rumtime library stuff installed in libsubdir. | |
| if test -z "${enable_version_specific_runtime_libs}"; then | |
| echo enable_version_specific_runtime_libs = no >> ${Makefile} | |
| else | |
| echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile} | |
| fi | |
| # Emit a macro which describes the file containing gcc's | |
| # version number. | |
| echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile} | |
| # And emit a macro defining gcc's version number. | |
| echo gcc_version = ${gcc_version} >> ${Makefile} | |
| # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS, | |
| # remove any form feeds. | |
| if [ -z "${subdirs}" ]; then | |
| rm -f ${subdir}/Makefile.tm2 | |
| sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \ | |
| -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \ | |
| ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2 | |
| rm -f ${subdir}/Makefile.tem | |
| mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem | |
| fi | |
| sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \ | |
| -e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \ | |
| -e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \ | |
| -e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \ | |
| -e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \ | |
| -e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \ | |
| -e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \ | |
| -e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \ | |
| -e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \ | |
| -e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \ | |
| -e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \ | |
| -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \ | |
| -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \ | |
| -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \ | |
| -e "/^CC[ ]*=/{ | |
| :loop1 | |
| /\\\\$/ N | |
| s/\\\\\\n//g | |
| t loop1 | |
| s%^CC[ ]*=.*$%CC = ${CC}% | |
| }" \ | |
| -e "/^CXX[ ]*=/{ | |
| :loop2 | |
| /\\\\$/ N | |
| s/\\\\\\n//g | |
| t loop2 | |
| s%^CXX[ ]*=.*$%CXX = ${CXX}% | |
| }" \ | |
| -e "/^CFLAGS[ ]*=/{ | |
| :loop3 | |
| /\\\\$/ N | |
| s/\\\\\\n//g | |
| t loop3 | |
| s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}% | |
| }" \ | |
| -e "/^CXXFLAGS[ ]*=/{ | |
| :loop4 | |
| /\\\\$/ N | |
| s/\\\\\\n//g | |
| t loop4 | |
| s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}% | |
| }" \ | |
| -e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \ | |
| -e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \ | |
| -e "s///" \ | |
| -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \ | |
| -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \ | |
| -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \ | |
| -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \ | |
| -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \ | |
| -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \ | |
| -e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \ | |
| ${subdir}/Makefile.tem >> ${Makefile} | |
| # If this is a Canadian Cross, preset the values of many more | |
| # tools. | |
| if [ "${build}" != "${host}" ]; then | |
| for var in ${tools}; do | |
| val=`eval 'echo $'"${var}"` | |
| sed -e "/^${var}[ ]*=/{ | |
| :loop1 | |
| /\\\\$/ N | |
| /\\\\$/ b loop1 | |
| s/\\\\\\n//g | |
| s%^${var}[ ]*=.*$%${var} = ${val}% | |
| }" ${Makefile} > ${Makefile}.tem | |
| mv -f ${Makefile}.tem ${Makefile} | |
| done | |
| fi | |
| # final copy now in ${Makefile} | |
| else | |
| echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2 | |
| fi | |
| rm -f ${subdir}/Makefile.tem | |
| case "${host_makefile_frag}" in | |
| "") using= ;; | |
| *) using="and \"${host_makefile_frag}\"" ;; | |
| esac | |
| case "${target_makefile_frag}" in | |
| "") ;; | |
| *) using="${using} and \"${target_makefile_frag}\"" ;; | |
| esac | |
| case "${site_makefile_frag}" in | |
| "") ;; | |
| *) using="${using} and \"${site_makefile_frag}\"" ;; | |
| esac | |
| newusing=`echo "${using}" | sed 's/and/using/'` | |
| using=${newusing} | |
| echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using} | |
| . ${tmpfile}.pos | |
| # describe the chosen configuration in config.status. | |
| # Make that file a shellscript which will reestablish | |
| # the same configuration. Used in Makefiles to rebuild | |
| # Makefiles. | |
| case "${norecursion}" in | |
| "") arguments="${arguments} --norecursion" ;; | |
| *) ;; | |
| esac | |
| if [ ${subdir} = . ] ; then | |
| echo "#!/bin/sh | |
| # ${NO_EDIT} | |
| # This directory was configured as follows: | |
| ${progname}" ${arguments} " | |
| # ${using}" > ${subdir}/config.new | |
| else | |
| echo "#!/bin/sh | |
| # ${NO_EDIT} | |
| # This directory was configured as follows: | |
| cd ${invsubdir} | |
| ${progname}" ${arguments} " | |
| # ${using}" > ${subdir}/config.new | |
| fi | |
| chmod a+x ${subdir}/config.new | |
| if [ -r ${subdir}/config.back ] ; then | |
| mv -f ${subdir}/config.back ${subdir}/config.status | |
| fi | |
| ${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status | |
| ;; | |
| *) rm -f ${Makefile} ${subdir}/config.status ${links} ;; | |
| esac | |
| done | |
| # If there are subdirectories, then recur. | |
| if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then | |
| for configdir in ${configdirs} ${extraconfigdirs} ; do | |
| # If configdir contains ',' it is | |
| # srcdir,builddir,target_alias | |
| # These come from extraconfigdirs. | |
| case ${configdir} in | |
| *,*) | |
| eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'` | |
| ;; | |
| *) | |
| cfg_dir=${configdir} | |
| bld_dir=${configdir} | |
| tgt_alias=${target_alias} | |
| ;; | |
| esac | |
| if [ -d ${srcdir}/${cfg_dir} ] ; then | |
| eval echo Configuring ${configdir}... ${redirect} | |
| case "${srcdir}" in | |
| ".") ;; | |
| *) | |
| if [ ! -d ./${bld_dir} ] ; then | |
| if mkdir ./${bld_dir} ; then | |
| true | |
| else | |
| echo '***' "${progname}: could not make ${PWD=`pwd`}/${bld_dir}" 1>&2 | |
| exit 1 | |
| fi | |
| fi | |
| ;; | |
| esac | |
| POPDIR=${PWD=`pwd`} | |
| cd ${bld_dir} | |
| ### figure out what to do with srcdir | |
| case "${srcdir}" in | |
| ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place. | |
| /*) # absolute path | |
| newsrcdir=${srcdir}/${cfg_dir} | |
| srcdiroption="--srcdir=${newsrcdir}" | |
| ;; | |
| ?:*) # absolute path on win32 | |
| newsrcdir=${srcdir}/${cfg_dir} | |
| srcdiroption="--srcdir=${newsrcdir}" | |
| ;; | |
| *) # otherwise relative | |
| newsrcdir=../${srcdir}/${cfg_dir} | |
| srcdiroption="--srcdir=${newsrcdir}" | |
| ;; | |
| esac | |
| # Handle --cache-file=../XXX | |
| case "${cache_file}" in | |
| "") # empty | |
| ;; | |
| /*) # absolute path | |
| cache_file_option="--cache-file=${cache_file}" | |
| ;; | |
| ?:*) # absolute path on win32 | |
| cache_file_option="--cache-file=${cache_file}" | |
| ;; | |
| *) # relative path | |
| cache_file_option="--cache-file=../${cache_file}" | |
| ;; | |
| esac | |
| ### check for guested configure, otherwise fix possibly relative progname | |
| if [ -f ${newsrcdir}/configure ] ; then | |
| recprog=${newsrcdir}/configure | |
| elif [ -f ${newsrcdir}/configure.in ] ; then | |
| case "${progname}" in | |
| /*) recprog=${progname} ;; | |
| ?:*) recprog=${progname} ;; | |
| *) recprog=../${progname} ;; | |
| esac | |
| else | |
| eval echo No configuration information in ${cfg_dir} ${redirect} | |
| recprog= | |
| fi | |
| ### The recursion line is here. | |
| if [ ! -z "${recprog}" ] ; then | |
| if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \ | |
| ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \ | |
| ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then | |
| true | |
| else | |
| echo Configure in `pwd` failed, exiting. 1>&2 | |
| exit 1 | |
| fi | |
| fi | |
| cd ${POPDIR} | |
| fi | |
| done | |
| fi | |
| # Perform the same cleanup as the trap handler, minus the "exit 1" of course, | |
| # and reset the trap handler. | |
| rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos | |
| trap 0 | |
| exit 0 | |
| # | |
| # Local Variables: | |
| # fill-column: 131 | |
| # End: | |
| # | |
| # end of configure |