| 2018-05-21 Tamar Christina <tamar.christina@arm.com> | |
| PR gdb/23200 | |
| * aarch64-opc.c (aarch64_logical_immediate_p): Update | |
| DEBUG_TRACE arguments. | |
| 2017-04-13 Alan Modra <amodra@gmail.com> | |
| * epiphany-desc.c: Regenerate. | |
| * fr30-desc.c: Regenerate. | |
| * frv-desc.c: Regenerate. | |
| * ip2k-desc.c: Regenerate. | |
| * iq2000-desc.c: Regenerate. | |
| * lm32-desc.c: Regenerate. | |
| * m32c-desc.c: Regenerate. | |
| * m32r-desc.c: Regenerate. | |
| * mep-desc.c: Regenerate. | |
| * mt-desc.c: Regenerate. | |
| * or1k-desc.c: Regenerate. | |
| * xc16x-desc.c: Regenerate. | |
| * xstormy16-desc.c: Regenerate. | |
| 2017-04-11 Alan Modra <amodra@gmail.com> | |
| * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2, | |
| PPC_OPCODE_VSX3, PPC_OPCODE_HTM and "htm". Formatting. Set | |
| PPC_OPCODE_TMR for e6500. | |
| * ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500. | |
| (PPCVEC3): Define as PPC_OPCODE_POWER9. | |
| (PPCVSX2): Define as PPC_OPCODE_POWER8. | |
| (PPCVSX3): Define as PPC_OPCODE_POWER9. | |
| (PPCHTM): Define as PPC_OPCODE_POWER8. | |
| (powerpc_opcodes <mftmr, mttmr>): Remove now unnecessary E6500. | |
| 2017-04-10 Alan Modra <amodra@gmail.com> | |
| * ppc-dis.c (ppc_opts <476>): Remove PPC_OPCODE_440. | |
| * ppc-opc.c (MULHW): Add PPC_OPCODE_476. | |
| (powerpc_opcodes): Adjust PPC440, PPC464 and PPC476 insns to suit | |
| removal of PPC_OPCODE_440 from ppc476 cpu selection bits. | |
| 2017-04-09 Pip Cet <pipcet@gmail.com> | |
| * wasm32-dis.c (print_insn_wasm32): Avoid DECIMAL_DIG, specify | |
| appropriate floating-point precision directly. | |
| 2017-04-07 Alan Modra <amodra@gmail.com> | |
| * ppc-opc.c (powerpc_opcodes <mviwsplt, mvidsplt, lvexbx, lvepxl, | |
| lvexhx, lvepx, lvexwx, stvexbx, stvexhx, stvexwx, lvtrx, lvtlx, | |
| lvswx, stvfrx, stvflx, stvswx, lvsm, stvepxl, lvtrxl, stvepx, | |
| lvtlxl, lvswxl, stvfrxl, stvflxl, stvswxl>): Enable E6500 only | |
| vector instructions with E6500 not PPCVEC2. | |
| 2017-04-06 Pip Cet <pipcet@gmail.com> | |
| * Makefile.am: Add wasm32-dis.c. | |
| * configure.ac: Add wasm32-dis.c to wasm32 target. | |
| * disassemble.c: Add wasm32 disassembler code. | |
| * wasm32-dis.c: New file. | |
| * Makefile.in: Regenerate. | |
| * configure: Regenerate. | |
| * po/POTFILES.in: Regenerate. | |
| * po/opcodes.pot: Regenerate. | |
| 2017-04-05 Pedro Alves <palves@redhat.com> | |
| * arc-dis.c (parse_option, parse_disassembler_options): Constify. | |
| * arm-dis.c (parse_arm_disassembler_options): Constify. | |
| * ppc-dis.c (powerpc_init_dialect): Constify local. | |
| * vax-dis.c (parse_disassembler_options): Constify. | |
| 2017-04-03 Palmer Dabbelt <palmer@dabbelt.com> | |
| * riscv-dis.c (riscv_disassemble_insn): Change "_gp" to | |
| RISCV_GP_SYMBOL. | |
| 2017-03-30 Pip Cet <pipcet@gmail.com> | |
| * configure.ac: Add (empty) bfd_wasm32_arch target. | |
| * configure: Regenerate | |
| * po/opcodes.pot: Regenerate. | |
| 2017-03-29 Sheldon Lobo <sheldon.lobo@oracle.com> | |
| Add support for missing SPARC ASIs from UA2005, UA2007, OSA2011, & | |
| OSA2015. | |
| * opcodes/sparc-opc.c (asi_table): New ASIs. | |
| 2017-03-29 Alan Modra <amodra@gmail.com> | |
| * ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add | |
| "raw" option. | |
| (lookup_powerpc): Don't special case -1 dialect. Handle | |
| PPC_OPCODE_RAW. | |
| (print_insn_powerpc): Mask out PPC_OPCODE_ANY on first | |
| lookup_powerpc call, pass it on second. | |
| 2017-03-27 Alan Modra <amodra@gmail.com> | |
| PR 21303 | |
| * ppc-dis.c (struct ppc_mopt): Comment. | |
| (ppc_opts <e200z4>): Move PPC_OPCODE_VLE from .sticky to .cpu. | |
| 2017-03-27 Rinat Zelig <rinat@mellanox.com> | |
| * arc-nps400-tbl.h: Add Ultra Ip and Miscellaneous instructions format. | |
| * arc-opc.c: Add defines. e.g. F_NJ, F_NM , F_NO_T, F_NPS_SR, | |
| F_NPS_M, F_NPS_CORE, F_NPS_ALL. | |
| (insert_nps_misc_imm_offset): New function. | |
| (extract_nps_misc imm_offset): New function. | |
| (arc_num_flag_operands): Add F_NJ, F_NM, F_NO_T. | |
| (arc_flag_special_cases): Add F_NJ, F_NM, F_NO_T. | |
| 2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com> | |
| * s390-mkopc.c (main): Remove vx2 check. | |
| * s390-opc.txt: Remove vx2 instruction flags. | |
| 2017-03-21 Rinat Zelig <rinat@mellanox.com> | |
| * arc-nps400-tbl.h: Add cp32/cp16 instructions format. | |
| * arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET. | |
| (insert_nps_imm_offset): New function. | |
| (extract_nps_imm_offset): New function. | |
| (insert_nps_imm_entry): New function. | |
| (extract_nps_imm_entry): New function. | |
| 2017-03-17 Alan Modra <amodra@gmail.com> | |
| PR 21248 | |
| * ppc-opc.c (powerpc_opcodes): Enable mfivor32, mfivor33, | |
| mtivor32, and mtivor33 for e6500. Move mfibatl and mfibatu after | |
| those spr mnemonics they alias. Similarly for mtibatl, mtibatu. | |
| 2017-03-14 Kito Cheng <kito.cheng@gmail.com> | |
| * riscv-opc.c (riscv_opcodes> <c.li>: Use the 'o' immediate encoding. | |
| <c.andi>: Likewise. | |
| <c.addiw> Likewise. | |
| 2017-03-14 Kito Cheng <kito.cheng@gmail.com> | |
| * riscv-opc.c (riscv_opcodes) <c.addi>: Use match_opcode. | |
| 2017-03-13 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c (riscv_opcodes) <srli/C>: Use match_opcode. | |
| <srl> Likewise. | |
| <srai> Likewise. | |
| <sra> Likewise. | |
| 2017-03-09 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-gen.c (opcode_modifiers): Replace S with Load. | |
| * i386-opc.h (S): Removed. | |
| (Load): New. | |
| (i386_opcode_modifier): Replace s with load. | |
| * i386-opc.tbl: Add {disp8}, {disp32}, {swap}, {vex2}, {vex3} | |
| and {evex}. Replace S with Load. | |
| * i386-tbl.h: Regenerated. | |
| 2017-03-09 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-opc.tbl: Use CpuCET on rdsspq. | |
| * i386-tbl.h: Regenerated. | |
| 2017-03-08 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-dis.c (ppc_opts) <altivec>: Do not use PPC_OPCODE_ALTIVEC2; | |
| <vsx>: Do not use PPC_OPCODE_VSX3; | |
| 2017-03-08 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-opc.c (powerpc_opcodes) <lnia>: New extended mnemonic. | |
| 2017-03-06 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (REG_0F1E_MOD_3): New enum. | |
| (MOD_0F1E_PREFIX_1): Likewise. | |
| (MOD_0F38F5_PREFIX_2): Likewise. | |
| (MOD_0F38F6_PREFIX_0): Likewise. | |
| (RM_0F1E_MOD_3_REG_7): Likewise. | |
| (PREFIX_MOD_0_0F01_REG_5): Likewise. | |
| (PREFIX_MOD_3_0F01_REG_5_RM_1): Likewise. | |
| (PREFIX_MOD_3_0F01_REG_5_RM_2): Likewise. | |
| (PREFIX_0F1E): Likewise. | |
| (PREFIX_MOD_0_0FAE_REG_5): Likewise. | |
| (PREFIX_0F38F5): Likewise. | |
| (dis386_twobyte): Use PREFIX_0F1E. | |
| (reg_table): Add REG_0F1E_MOD_3. | |
| (prefix_table): Add PREFIX_MOD_0_0F01_REG_5, | |
| PREFIX_MOD_3_0F01_REG_5_RM_1, PREFIX_MOD_3_0F01_REG_5_RM_2, | |
| PREFIX_0F1E, PREFIX_MOD_0_0FAE_REG_5 and PREFIX_0F38F5. Update | |
| PREFIX_0FAE_REG_6 and PREFIX_0F38F6. | |
| (three_byte_table): Use PREFIX_0F38F5. | |
| (mod_table): Use PREFIX_MOD_0_0F01_REG_5, PREFIX_MOD_0_0FAE_REG_5. | |
| Add MOD_0F1E_PREFIX_1, MOD_0F38F5_PREFIX_2, MOD_0F38F6_PREFIX_0. | |
| (rm_table): Add MOD_0F38F5_PREFIX_2, MOD_0F38F6_PREFIX_0, | |
| RM_0F1E_MOD_3_REG_7. Use PREFIX_MOD_3_0F01_REG_5_RM_1 and | |
| PREFIX_MOD_3_0F01_REG_5_RM_2. | |
| * i386-gen.c (cpu_flag_init): Add CPU_CET_FLAGS. | |
| (cpu_flags): Add CpuCET. | |
| * i386-opc.h (CpuCET): New enum. | |
| (CpuUnused): Commented out. | |
| (i386_cpu_flags): Add cpucet. | |
| * i386-opc.tbl: Add Intel CET instructions. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| 2017-03-06 Alan Modra <amodra@gmail.com> | |
| PR 21124 | |
| * ppc-opc.c (extract_esync, extract_ls, extract_ral, extract_ram) | |
| (extract_raq, extract_ras, extract_rbx): New functions. | |
| (powerpc_operands): Use opposite corresponding insert function. | |
| (Q_MASK): Define. | |
| (powerpc_opcodes): Apply Q_MASK to all quad insns with even | |
| register restriction. | |
| 2017-02-28 Peter Bergner <bergner@vnet.ibm.com> | |
| * disassemble.c Include "safe-ctype.h". | |
| (disassemble_init_for_target): Handle s390 init. | |
| (remove_whitespace_and_extra_commas): New function. | |
| (disassembler_options_cmp): Likewise. | |
| * arm-dis.c: Include "libiberty.h". | |
| (NUM_ELEM): Delete. | |
| (regnames): Use long disassembler style names. | |
| Add force-thumb and no-force-thumb options. | |
| (NUM_ARM_REGNAMES): Rename from this... | |
| (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. | |
| (get_arm_regname_num_options): Delete. | |
| (set_arm_regname_option): Likewise. | |
| (get_arm_regnames): Likewise. | |
| (parse_disassembler_options): Likewise. | |
| (parse_arm_disassembler_option): Rename from this... | |
| (parse_arm_disassembler_options): ...to this. Make static. | |
| Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. | |
| (print_insn): Use parse_arm_disassembler_options. | |
| (disassembler_options_arm): New function. | |
| (print_arm_disassembler_options): Handle updated regnames. | |
| * ppc-dis.c: Include "libiberty.h". | |
| (ppc_opts): Add "32" and "64" entries. | |
| (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. | |
| (powerpc_init_dialect): Add break to switch statement. | |
| Use new FOR_EACH_DISASSEMBLER_OPTION macro. | |
| (disassembler_options_powerpc): New function. | |
| (print_ppc_disassembler_options): Use ARRAY_SIZE. | |
| Remove printing of "32" and "64". | |
| * s390-dis.c: Include "libiberty.h". | |
| (init_flag): Remove unneeded variable. | |
| (struct s390_options_t): New structure type. | |
| (options): New structure. | |
| (init_disasm): Rename from this... | |
| (disassemble_init_s390): ...to this. Add initializations for | |
| current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. | |
| (print_insn_s390): Delete call to init_disasm. | |
| (disassembler_options_s390): New function. | |
| (print_s390_disassembler_options): Print using information from | |
| struct 'options'. | |
| * po/opcodes.pot: Regenerate. | |
| 2017-02-28 Jan Beulich <jbeulich@suse.com> | |
| * i386-dis.c (PCMPESTR_Fixup): New. | |
| (VEX_W_0F3A60_P_2, VEX_W_0F3A61_P_2): Delete. | |
| (prefix_table): Use PCMPESTR_Fixup. | |
| (vex_len_table): Make VPCMPESTR{I,M} entries leaf ones and use | |
| PCMPESTR_Fixup. | |
| (vex_w_table): Delete VPCMPESTR{I,M} entries. | |
| * i386-opc.tbl (pcmpestri, pcmpestrm, vpcmpestri, vpcmpestrm): | |
| Split 64-bit and non-64-bit variants. | |
| * opcodes/i386-tbl.h: Re-generate. | |
| 2017-02-24 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD) | |
| (OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD) | |
| (OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S) | |
| (OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H) | |
| (OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH) | |
| (OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD) | |
| (OP_SVE_V_HSD): New macros. | |
| (OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD) | |
| (OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD) | |
| (OP_SVE_VZV_SD, OP_SVE_V_SD): Delete. | |
| (aarch64_opcode_table): Add new SVE instructions. | |
| (aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate | |
| for rotation operands. Add new SVE operands. | |
| * aarch64-asm.h (ins_sve_addr_ri_s4): New inserter. | |
| (ins_sve_quad_index): Likewise. | |
| (ins_imm_rotate): Split into... | |
| (ins_imm_rotate1, ins_imm_rotate2): ...these two inserters. | |
| * aarch64-asm.c (aarch64_ins_imm_rotate): Split into... | |
| (aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two | |
| functions. | |
| (aarch64_ins_sve_addr_ri_s4): New function. | |
| (aarch64_ins_sve_quad_index): Likewise. | |
| (do_misc_encoding): Handle "MOV Zn.Q, Qm". | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_sve_addr_ri_s4): New extractor. | |
| (ext_sve_quad_index): Likewise. | |
| (ext_imm_rotate): Split into... | |
| (ext_imm_rotate1, ext_imm_rotate2): ...these two extractors. | |
| * aarch64-dis.c (aarch64_ext_imm_rotate): Split into... | |
| (aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two | |
| functions. | |
| (aarch64_ext_sve_addr_ri_s4): New function. | |
| (aarch64_ext_sve_quad_index): Likewise. | |
| (aarch64_ext_sve_index): Allow quad indices. | |
| (do_misc_decoding): Likewise. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New | |
| aarch64_field_kinds. | |
| (OPD_F_OD_MASK): Widen by one bit. | |
| (OPD_F_NO_ZR): Bump accordingly. | |
| (get_operand_field_width): New function. | |
| * aarch64-opc.c (fields): Add new SVE fields. | |
| (operand_general_constraint_met_p): Handle new SVE operands. | |
| (aarch64_print_operand): Likewise. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2017-02-24 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with... | |
| (aarch64_feature_compnum): ...this. | |
| (SIMD_V8_3): Replace with... | |
| (COMPNUM): ...this. | |
| (CNUM_INSN): New macro. | |
| (aarch64_opcode_table): Use it for the complex number instructions. | |
| 2017-02-24 Jan Beulich <jbeulich@suse.com> | |
| * i386-dis.c (reg_table): REG_F6/1 and REG_F7/1 decode as TEST. | |
| 2017-02-23 Sheldon Lobo <sheldon.lobo@oracle.com> | |
| Add support for associating SPARC ASIs with an architecture level. | |
| * include/opcode/sparc.h (sparc_asi): New sparc_asi struct. | |
| * opcodes/sparc-opc.c (asi_table): Updated asi_table and encoding/ | |
| decoding of SPARC ASIs. | |
| 2017-02-23 Jan Beulich <jbeulich@suse.com> | |
| * i386-dis.c (get_valid_dis386): Don't special case VEX opcode | |
| 82. For 3-byte VEX only special case opcode 77 in VEX_0F space. | |
| 2017-02-21 Jan Beulich <jbeulich@suse.com> | |
| * aarch64-asm.c (convert_bfc_to_bfm): Copy operand 0 to operand | |
| 1 (instead of to itself). Correct typo. | |
| 2017-02-14 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c (riscv_opcodes): Add sfence.vma instruction and | |
| pseudoinstructions. | |
| 2017-02-15 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (aarch64_sys_regs): Add SVE registers. | |
| (aarch64_sys_reg_supported_p): Handle them. | |
| 2017-02-15 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-opc.c (UIMM6_20R): Define. | |
| (SIMM12_20): Use above. | |
| (SIMM12_20R): Define. | |
| (SIMM3_5_S): Use above. | |
| (UIMM7_A32_11R_S): Define. | |
| (UIMM7_9_S): Use above. | |
| (UIMM3_13R_S): Define. | |
| (SIMM11_A32_7_S): Use above. | |
| (SIMM9_8R): Define. | |
| (UIMM10_A32_8_S): Use above. | |
| (UIMM8_8R_S): Define. | |
| (W6): Use above. | |
| (arc_relax_opcodes): Use all above defines. | |
| 2017-02-15 Vineet Gupta <vgupta@synopsys.com> | |
| * arc-regs.h: Distinguish some of the registers different on | |
| ARC700 and HS38 cpus. | |
| 2017-02-14 Alan Modra <amodra@gmail.com> | |
| PR 21118 | |
| * ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries | |
| with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR. | |
| 2017-02-11 Stafford Horne <shorne@gmail.com> | |
| Alan Modra <amodra@gmail.com> | |
| * cgen-opc.c (cgen_lookup_insn): Delete buf and base_insn temps. | |
| Use insn_bytes_value and insn_int_value directly instead. Don't | |
| free allocated memory until function exit. | |
| 2017-02-10 Nicholas Piggin <npiggin@gmail.com> | |
| * ppc-opc.c (powerpc_opcodes) <scv, rfscv>: New mnemonics. | |
| 2017-02-03 Nick Clifton <nickc@redhat.com> | |
| PR 21096 | |
| * aarch64-opc.c (print_register_list): Ensure that the register | |
| list index will fir into the tb buffer. | |
| (print_register_offset_address): Likewise. | |
| * tic6x-dis.c (print_insn_tic6x): Increase size of func_unit_buf. | |
| 2017-01-27 Alexis Deruell <alexis.deruelle@gmail.com> | |
| PR 21056 | |
| * tic6x-dis.c (print_insn_tic6x): Correct displaying of parallel | |
| instructions when the previous fetch packet ends with a 32-bit | |
| instruction. | |
| 2017-01-24 Dimitar Dimitrov <dimitar@dinux.eu> | |
| * pru-opc.c: Remove vague reference to a future GDB port. | |
| 2017-01-20 Nick Clifton <nickc@redhat.com> | |
| * po/ga.po: Updated Irish translation. | |
| 2017-01-18 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * arm-dis.c (coprocessor_opcodes): Fix vcmla mask and disassembly. | |
| 2017-01-13 Yao Qi <yao.qi@linaro.org> | |
| * m68k-dis.c (match_insn_m68k): Extend comments. Return -1 | |
| if FETCH_DATA returns 0. | |
| (m68k_scan_mask): Likewise. | |
| (print_insn_m68k): Update code to handle -1 return value. | |
| 2017-01-13 Yao Qi <yao.qi@linaro.org> | |
| * m68k-dis.c (enum print_insn_arg_error): New. | |
| (NEXTBYTE): Replace -3 with | |
| PRINT_INSN_ARG_MEMORY_ERROR. | |
| (NEXTULONG): Likewise. | |
| (NEXTSINGLE): Likewise. | |
| (NEXTDOUBLE): Likewise. | |
| (NEXTDOUBLE): Likewise. | |
| (NEXTPACKED): Likewise. | |
| (FETCH_ARG): Likewise. | |
| (FETCH_DATA): Update comments. | |
| (print_insn_arg): Update comments. Replace magic numbers with | |
| enum. | |
| (match_insn_m68k): Likewise. | |
| 2017-01-12 Igor Tsimbalist <igor.v.tsimbalist@intel.com> | |
| * i386-dis.c (enum): Add PREFIX_EVEX_0F3855, EVEX_W_0F3855_P_2. | |
| * i386-dis-evex.h (evex_table): Updated. | |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VPOPCNTDQ_FLAGS, | |
| CPU_ANY_AVX512_VPOPCNTDQ_FLAGS. Update CPU_ANY_AVX512F_FLAGS. | |
| (cpu_flags): Add CpuAVX512_VPOPCNTDQ. | |
| * i386-opc.h (enum): (AVX512_VPOPCNTDQ): New. | |
| (i386_cpu_flags): Add cpuavx512_vpopcntdq. | |
| * i386-opc.tbl: Add Intel AVX512_VPOPCNTDQ instructions. | |
| * i386-init.h: Regenerate. | |
| * i386-tbl.h: Ditto. | |
| 2017-01-12 Yao Qi <yao.qi@linaro.org> | |
| * msp430-dis.c (msp430_singleoperand): Return -1 if | |
| msp430dis_opcode_signed returns false. | |
| (msp430_doubleoperand): Likewise. | |
| (msp430_branchinstr): Return -1 if | |
| msp430dis_opcode_unsigned returns false. | |
| (msp430x_calla_instr): Likewise. | |
| (print_insn_msp430): Likewise. | |
| 2017-01-05 Nick Clifton <nickc@redhat.com> | |
| PR 20946 | |
| * frv-desc.c (lookup_mach_via_bfd_name): Return NULL if the name | |
| could not be matched. | |
| (frv_cgen_cpu_open): Allow for lookup_mach_via_bfd_name returning | |
| NULL. | |
| 2017-01-04 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (RCPC, RCPC_INSN): Define. | |
| (aarch64_opcode_table): Use RCPC_INSN. | |
| 2017-01-03 Kito Cheng <kito.cheng@gmail.com> | |
| * riscv-opc.c (riscv-opcodes): Add support for the "q" ISA | |
| extension. | |
| * riscv-opcodes/all-opcodes: Likewise. | |
| 2017-01-03 Dilyan Palauzov <dilyan.palauzov@aegee.org> | |
| * riscv-dis.c (print_insn_args): Add fall through comment. | |
| 2017-01-03 Nick Clifton <nickc@redhat.com> | |
| * po/sr.po: New Serbian translation. | |
| * configure.ac (ALL_LINGUAS): Add sr. | |
| * configure: Regenerate. | |
| 2017-01-02 Alan Modra <amodra@gmail.com> | |
| * epiphany-desc.h: Regenerate. | |
| * epiphany-opc.h: Regenerate. | |
| * fr30-desc.h: Regenerate. | |
| * fr30-opc.h: Regenerate. | |
| * frv-desc.h: Regenerate. | |
| * frv-opc.h: Regenerate. | |
| * ip2k-desc.h: Regenerate. | |
| * ip2k-opc.h: Regenerate. | |
| * iq2000-desc.h: Regenerate. | |
| * iq2000-opc.h: Regenerate. | |
| * lm32-desc.h: Regenerate. | |
| * lm32-opc.h: Regenerate. | |
| * m32c-desc.h: Regenerate. | |
| * m32c-opc.h: Regenerate. | |
| * m32r-desc.h: Regenerate. | |
| * m32r-opc.h: Regenerate. | |
| * mep-desc.h: Regenerate. | |
| * mep-opc.h: Regenerate. | |
| * mt-desc.h: Regenerate. | |
| * mt-opc.h: Regenerate. | |
| * or1k-desc.h: Regenerate. | |
| * or1k-opc.h: Regenerate. | |
| * xc16x-desc.h: Regenerate. | |
| * xc16x-opc.h: Regenerate. | |
| * xstormy16-desc.h: Regenerate. | |
| * xstormy16-opc.h: Regenerate. | |
| 2017-01-02 Alan Modra <amodra@gmail.com> | |
| Update year range in copyright notice of all files. | |
| For older changes see ChangeLog-2016 | |
| Copyright (C) 2017 Free Software Foundation, Inc. | |
| Copying and distribution of this file, with or without modification, | |
| are permitted in any medium without royalty provided the copyright | |
| notice and this notice are preserved. | |
| Local Variables: | |
| mode: change-log | |
| left-margin: 8 | |
| fill-column: 74 | |
| version-control: never | |
| End: |