| 2004-07-19 Andreas Schwab <schwab@suse.de> | |
| * m68k-dis.c (m68k_valid_ea): Fix typos in last change. | |
| 2004-07-09 Andreas Schwab <schwab@suse.de> | |
| * m68k-dis.c (m68k_valid_ea): Check validity of all codes. | |
| 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com> | |
| * Makefile.am (CFILES): Add crx-dis.c, crx-opc.c. | |
| (ALL_MACHINES): Add crx-dis.lo, crx-opc.lo. | |
| (crx-dis.lo): New target. | |
| (crx-opc.lo): Likewise. | |
| * Makefile.in: Regenerate. | |
| * configure.in: Handle bfd_crx_arch. | |
| * configure: Regenerate. | |
| * crx-dis.c: New file. | |
| * crx-opc.c: New file. | |
| * disassemble.c (ARCH_crx): Define. | |
| (disassembler): Handle ARCH_crx. | |
| 2004-06-29 James E Wilson <wilson@specifixinc.com> | |
| * ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds. | |
| * ia64-asmtab.c: Regnerate. | |
| 2004-06-28 Alan Modra <amodra@bigpond.net.au> | |
| * ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf. | |
| (extract_fxm): Don't test dialect. | |
| (XFXFXM_MASK): Include the power4 bit. | |
| (XFXM): Add p4 param. | |
| (powerpc_opcodes): Add mfocrf and mtocrf. Adjust mtcr. | |
| 2004-06-27 Alexandre Oliva <aoliva@redhat.com> | |
| 2003-07-21 Richard Sandiford <rsandifo@redhat.com> | |
| * disassemble.c (disassembler): Handle bfd_mach_h8300sxn. | |
| 2004-06-26 Alan Modra <amodra@bigpond.net.au> | |
| * ppc-opc.c (BH, XLBH_MASK): Define. | |
| (powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl. | |
| 2004-06-24 Alan Modra <amodra@bigpond.net.au> | |
| * i386-dis.c (x_mode): Comment. | |
| (two_source_ops): File scope. | |
| (float_mem): Correct fisttpll and fistpll. | |
| (float_mem_mode): New table. | |
| (dofloat): Use it. | |
| (OP_E): Correct intel mode PTR output. | |
| (ptr_reg): Use open_char and close_char. | |
| (PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for | |
| operands. Set two_source_ops. | |
| 2004-06-15 Alan Modra <amodra@bigpond.net.au> | |
| * arc-ext.c (build_ARC_extmap): Use bfd_get_section_size | |
| instead of _raw_size. | |
| 2004-06-08 Jakub Jelinek <jakub@redhat.com> | |
| * ia64-gen.c (in_iclass): Handle more postinc st | |
| and ld variants. | |
| * ia64-asmtab.c: Rebuilt. | |
| 2004-06-01 Martin Schwidefsky <schwidefsky@de.ibm.com> | |
| * s390-opc.txt: Correct architecture mask for some opcodes. | |
| lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available | |
| in the esa mode as well. | |
| 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com> | |
| * sh-dis.c (target_arch): Make unsigned. | |
| (print_insn_sh): Replace (most of) switch with a call to | |
| sh_get_arch_from_bfd_mach(). Also use new architecture flags system. | |
| * sh-opc.h: Redefine architecture flags values. | |
| Add sh3-nommu architecture. | |
| Reorganise <arch>_up macros so they make more visual sense. | |
| (SH_MERGE_ARCH_SET): Define new macro. | |
| (SH_VALID_BASE_ARCH_SET): Likewise. | |
| (SH_VALID_MMU_ARCH_SET): Likewise. | |
| (SH_VALID_CO_ARCH_SET): Likewise. | |
| (SH_VALID_ARCH_SET): Likewise. | |
| (SH_MERGE_ARCH_SET_VALID): Likewise. | |
| (SH_ARCH_SET_HAS_FPU): Likewise. | |
| (SH_ARCH_SET_HAS_DSP): Likewise. | |
| (SH_ARCH_UNKNOWN_ARCH): Likewise. | |
| (sh_get_arch_from_bfd_mach): Add prototype. | |
| (sh_get_arch_up_from_bfd_mach): Likewise. | |
| (sh_get_bfd_mach_from_arch_set): Likewise. | |
| (sh_merge_bfd_arc): Likewise. | |
| 2004-05-24 Peter Barada <peter@the-baradas.com> | |
| * m68k-dis.c(print_insn_m68k): Strip body of diassembly out | |
| into new match_insn_m68k function. Loop over canidate | |
| matches and select first that completely matches. | |
| * m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit. | |
| * m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea | |
| to verify addressing for MAC/EMAC. | |
| * m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC | |
| reigster halves since 'fpu' and 'spl' look misleading. | |
| * m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases. | |
| * m68k-opc.c: Rearragne mac/emac cases to use longest for | |
| first, tighten up match masks. | |
| * m68k-opc.c: Add 'size' field to struct m68k_opcode. Produce | |
| 'size' from special case code in print_insn_m68k to | |
| determine decode size of insns. | |
| 2004-05-19 Alan Modra <amodra@bigpond.net.au> | |
| * ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as | |
| well as when -mpower4. | |
| 2004-05-13 Nick Clifton <nickc@redhat.com> | |
| * po/fr.po: Updated French translation. | |
| 2004-05-05 Peter Barada <peter@the-baradas.com> | |
| * m68k-dis.c(print_insn_m68k): Add new chips, use core | |
| variants in arch_mask. Only set m68881/68851 for 68k chips. | |
| * m68k-op.c: Switch from ColdFire chips to core variants. | |
| 2004-05-05 Alan Modra <amodra@bigpond.net.au> | |
| PR 147. | |
| * ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC. | |
| 2004-04-29 Ben Elliston <bje@au.ibm.com> | |
| * ppc-opc.c (XCMPL): Renmame to XOPL. Update users. | |
| (powerpc_opcodes): Add "dbczl" instruction for PPC970. | |
| 2004-04-22 Kaz Kojima <kkojima@rr.iij4u.or.jp> | |
| * sh-dis.c (print_insn_sh): Print the value in constant pool | |
| as a symbol if it looks like a symbol. | |
| 2004-04-22 Peter Barada <peter@the-baradas.com> | |
| * m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on | |
| appropriate ColdFire architectures. | |
| (print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC | |
| mask addressing. | |
| Add EMAC instructions, fix MAC instructions. Remove | |
| macmw/macml/msacmw/msacml instructions since mask addressing now | |
| supported. | |
| 2004-04-20 Jakub Jelinek <jakub@redhat.com> | |
| * sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define. | |
| (fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to | |
| suffix. Use fmov*x macros, create all 3 fpsize variants in one | |
| macro. Adjust all users. | |
| 2004-04-15 Anil Paranjpe <anilp1@kpitcummins.com> | |
| * h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs" | |
| separately. | |
| 2004-03-30 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> | |
| * m32r-asm.c: Regenerate. | |
| 2004-03-29 Stan Shebs <shebs@apple.com> | |
| * mpw-config.in, mpw-make.sed: Remove MPW support files, no longer | |
| used. | |
| 2004-03-19 Alan Modra <amodra@bigpond.net.au> | |
| * aclocal.m4: Regenerate. | |
| * config.in: Regenerate. | |
| * configure: Regenerate. | |
| * po/POTFILES.in: Regenerate. | |
| * po/opcodes.pot: Regenerate. | |
| 2004-03-16 Alan Modra <amodra@bigpond.net.au> | |
| * ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle | |
| PPC_OPERANDS_GPR_0. | |
| * ppc-opc.c (RA0): Define. | |
| (RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0. | |
| (RAOPT): Rename from RAO. Update all uses. | |
| (powerpc_opcodes): Use RA0 as appropriate. | |
| 2004-03-15 Aldy Hernandez <aldyh@redhat.com> | |
| * ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg. | |
| 2004-03-15 Alan Modra <amodra@bigpond.net.au> | |
| * sparc-dis.c (print_insn_sparc): Update getword prototype. | |
| 2004-03-12 Michal Ludvig <mludvig@suse.cz> | |
| * i386-dis.c (GRPPLOCK): Delete. | |
| (grps): Delete GRPPLOCK entry. | |
| 2004-03-12 Alan Modra <amodra@bigpond.net.au> | |
| * i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions. | |
| (M, Mp): Use OP_M. | |
| (None, PADLOCK_SPECIAL, PADLOCK_0): Delete. | |
| (GRPPADLCK): Define. | |
| (dis386): Use NOP_Fixup on "nop". | |
| (dis386_twobyte): Use GRPPADLCK on opcode 0xa7. | |
| (twobyte_has_modrm): Set for 0xa7. | |
| (padlock_table): Delete. Move to.. | |
| (grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence | |
| and clflush. | |
| (print_insn): Revert PADLOCK_SPECIAL code. | |
| (OP_E): Delete sfence, lfence, mfence checks. | |
| 2004-03-12 Jakub Jelinek <jakub@redhat.com> | |
| * i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg. | |
| (INVLPG_Fixup): New function. | |
| (PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag. | |
| 2004-03-12 Michal Ludvig <mludvig@suse.cz> | |
| * i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines. | |
| (dis386_twobyte): Opcode 0xa7 is PADLOCK_0. | |
| (padlock_table): New struct with PadLock instructions. | |
| (print_insn): Handle PADLOCK_SPECIAL. | |
| 2004-03-12 Alan Modra <amodra@bigpond.net.au> | |
| * i386-dis.c (grps): Use clflush by default for 0x0fae/7. | |
| (OP_E): Twiddle clflush to sfence here. | |
| 2004-03-08 Nick Clifton <nickc@redhat.com> | |
| * po/de.po: Updated German translation. | |
| 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com> | |
| * sh-dis.c (print_insn_sh): Don't disassemble fp instructions in | |
| nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu. | |
| * sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions | |
| accordingly. | |
| 2004-03-01 Richard Sandiford <rsandifo@redhat.com> | |
| * frv-asm.c: Regenerate. | |
| * frv-desc.c: Regenerate. | |
| * frv-desc.h: Regenerate. | |
| * frv-dis.c: Regenerate. | |
| * frv-ibld.c: Regenerate. | |
| * frv-opc.c: Regenerate. | |
| * frv-opc.h: Regenerate. | |
| 2004-03-01 Richard Sandiford <rsandifo@redhat.com> | |
| * frv-desc.c, frv-opc.c: Regenerate. | |
| 2004-03-01 Richard Sandiford <rsandifo@redhat.com> | |
| * frv-desc.c, frv-opc.c, frv-opc.h: Regenerate. | |
| 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com> | |
| * sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4. | |
| Also correct mistake in the comment. | |
| 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com> | |
| * sh-dis.c (print_insn_sh): Add REG_N_D nibble type to | |
| ensure that double registers have even numbers. | |
| Add REG_N_B01 for nn01 (binary 01) nibble to ensure | |
| that reserved instruction 0xfffd does not decode the same | |
| as 0xfdfd (ftrv). | |
| * sh-opc.h: Add REG_N_D nibble type and use it whereever | |
| REG_N refers to a double register. | |
| Add REG_N_B01 nibble type and use it instead of REG_NM | |
| in ftrv. | |
| Adjust the bit patterns in a few comments. | |
| 2004-02-25 Aldy Hernandez <aldyh@redhat.com> | |
| * ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst. | |
| 2004-02-20 Aldy Hernandez <aldyh@redhat.com> | |
| * ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat. | |
| 2004-02-20 Aldy Hernandez <aldyh@redhat.com> | |
| * ppc-opc.c (powerpc_opcodes): Add m*ivor35. | |
| 2004-02-20 Aldy Hernandez <aldyh@redhat.com> | |
| * ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34, | |
| mtivor32, mtivor33, mtivor34. | |
| 2004-02-19 Aldy Hernandez <aldyh@redhat.com> | |
| * ppc-opc.c (powerpc_opcodes): Add mfmcar. | |
| 2004-02-10 Petko Manolov <petkan@nucleusys.com> | |
| * arm-opc.h Maverick accumulator register opcode fixes. | |
| 2004-02-13 Ben Elliston <bje@wasabisystems.com> | |
| * m32r-dis.c: Regenerate. | |
| 2004-01-27 Michael Snyder <msnyder@redhat.com> | |
| * sh-opc.h (sh_table): "fsrra", not "fssra". | |
| 2004-01-23 Andrew Over <andrew.over@cs.anu.edu.au> | |
| * sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten | |
| contraints. | |
| 2004-01-19 Andrew Over <andrew.over@cs.anu.edu.au> | |
| * sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args. | |
| 2004-01-19 Alan Modra <amodra@bigpond.net.au> | |
| * i386-dis.c (OP_E): Print scale factor on intel mode sib when not | |
| 1. Don't print scale factor on AT&T mode when index missing. | |
| 2004-01-16 Alexandre Oliva <aoliva@redhat.com> | |
| * m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended | |
| when loaded into XR registers. | |
| 2004-01-14 Richard Sandiford <rsandifo@redhat.com> | |
| * frv-desc.h: Regenerate. | |
| * frv-desc.c: Regenerate. | |
| * frv-opc.c: Regenerate. | |
| 2004-01-13 Michael Snyder <msnyder@redhat.com> | |
| * sh-dis.c (print_insn_sh): Allocate 4 bytes for insn. | |
| 2004-01-09 Paul Brook <paul@codesourcery.com> | |
| * arm-opc.h (arm_opcodes): Move generic mcrr after known | |
| specific opcodes. | |
| 2004-01-07 Daniel Jacobowitz <drow@mvista.com> | |
| * Makefile.am (libopcodes_la_DEPENDENCIES) | |
| (libopcodes_la_LIBADD): Revert 2003-05-17 change. Add explanatory | |
| comment about the problem. | |
| * Makefile.in: Regenerate. | |
| 2004-01-06 Alexandre Oliva <aoliva@redhat.com> | |
| 2003-12-19 Alexandre Oliva <aoliva@redhat.com> | |
| * frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some | |
| cut&paste errors in shifting/truncating numerical operands. | |
| 2003-08-04 Alexandre Oliva <aoliva@redhat.com> | |
| * frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo. | |
| (parse_uslo16): Likewise. | |
| (parse_uhi16): Parse gotoffhi and gotofffuncdeschi. | |
| (parse_d12): Parse gotoff12 and gotofffuncdesc12. | |
| (parse_s12): Likewise. | |
| 2003-08-04 Alexandre Oliva <aoliva@redhat.com> | |
| * frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo. | |
| (parse_uslo16): Likewise. | |
| (parse_uhi16): Parse gothi and gotfuncdeschi. | |
| (parse_d12): Parse got12 and gotfuncdesc12. | |
| (parse_s12): Likewise. | |
| 2004-01-02 Albert Bartoszko <albar@nt.kegel.com.pl> | |
| * msp430-dis.c (msp430_doubleoperand): Check for an 'add' | |
| instruction which looks similar to an 'rla' instruction. | |
| For older changes see ChangeLog-0203 | |
| Local Variables: | |
| mode: change-log | |
| left-margin: 8 | |
| fill-column: 74 | |
| version-control: never | |
| End: |