| #include <signal.h> | |
| #include "sysdep.h" | |
| #include "bfd.h" | |
| #include "gdb/callback.h" | |
| #include "gdb/remote-sim.h" | |
| #include "d10v_sim.h" | |
| #include "gdb/sim-d10v.h" | |
| #include "gdb/signals.h" | |
| enum _leftright { LEFT_FIRST, RIGHT_FIRST }; | |
| static char *myname; | |
| static SIM_OPEN_KIND sim_kind; | |
| int d10v_debug; | |
| /* Set this to true to get the previous segment layout. */ | |
| int old_segment_mapping; | |
| host_callback *d10v_callback; | |
| unsigned long ins_type_counters[ (int)INS_MAX ]; | |
| uint16 OP[4]; | |
| static int init_text_p = 0; | |
| /* non-zero if we opened prog_bfd */ | |
| static int prog_bfd_was_opened_p; | |
| bfd *prog_bfd; | |
| asection *text; | |
| bfd_vma text_start; | |
| bfd_vma text_end; | |
| static long hash PARAMS ((long insn, int format)); | |
| static struct hash_entry *lookup_hash PARAMS ((uint32 ins, int size)); | |
| static void get_operands PARAMS ((struct simops *s, uint32 ins)); | |
| static void do_long PARAMS ((uint32 ins)); | |
| static void do_2_short PARAMS ((uint16 ins1, uint16 ins2, enum _leftright leftright)); | |
| static void do_parallel PARAMS ((uint16 ins1, uint16 ins2)); | |
| static char *add_commas PARAMS ((char *buf, int sizeof_buf, unsigned long value)); | |
| extern void sim_set_profile PARAMS ((int n)); | |
| extern void sim_set_profile_size PARAMS ((int n)); | |
| static INLINE uint8 *map_memory (unsigned phys_addr); | |
| #ifdef NEED_UI_LOOP_HOOK | |
| /* How often to run the ui_loop update, when in use */ | |
| #define UI_LOOP_POLL_INTERVAL 0x14000 | |
| /* Counter for the ui_loop_hook update */ | |
| static long ui_loop_hook_counter = UI_LOOP_POLL_INTERVAL; | |
| /* Actual hook to call to run through gdb's gui event loop */ | |
| extern int (*deprecated_ui_loop_hook) PARAMS ((int signo)); | |
| #endif /* NEED_UI_LOOP_HOOK */ | |
| #ifndef INLINE | |
| #if defined(__GNUC__) && defined(__OPTIMIZE__) | |
| #define INLINE __inline__ | |
| #else | |
| #define INLINE | |
| #endif | |
| #endif | |
| #define MAX_HASH 63 | |
| struct hash_entry | |
| { | |
| struct hash_entry *next; | |
| uint32 opcode; | |
| uint32 mask; | |
| int size; | |
| struct simops *ops; | |
| }; | |
| struct hash_entry hash_table[MAX_HASH+1]; | |
| INLINE static long | |
| hash(insn, format) | |
| long insn; | |
| int format; | |
| { | |
| if (format & LONG_OPCODE) | |
| return ((insn & 0x3F000000) >> 24); | |
| else | |
| return((insn & 0x7E00) >> 9); | |
| } | |
| INLINE static struct hash_entry * | |
| lookup_hash (ins, size) | |
| uint32 ins; | |
| int size; | |
| { | |
| struct hash_entry *h; | |
| if (size) | |
| h = &hash_table[(ins & 0x3F000000) >> 24]; | |
| else | |
| h = &hash_table[(ins & 0x7E00) >> 9]; | |
| while ((ins & h->mask) != h->opcode || h->size != size) | |
| { | |
| if (h->next == NULL) | |
| { | |
| State.exception = SIGILL; | |
| State.pc_changed = 1; /* Don't increment the PC. */ | |
| return NULL; | |
| } | |
| h = h->next; | |
| } | |
| return (h); | |
| } | |
| INLINE static void | |
| get_operands (struct simops *s, uint32 ins) | |
| { | |
| int i, shift, bits, flags; | |
| uint32 mask; | |
| for (i=0; i < s->numops; i++) | |
| { | |
| shift = s->operands[3*i]; | |
| bits = s->operands[3*i+1]; | |
| flags = s->operands[3*i+2]; | |
| mask = 0x7FFFFFFF >> (31 - bits); | |
| OP[i] = (ins >> shift) & mask; | |
| } | |
| /* FIXME: for tracing, update values that need to be updated each | |
| instruction decode cycle */ | |
| State.trace.psw = PSW; | |
| } | |
| bfd_vma | |
| decode_pc () | |
| { | |
| asection *s; | |
| if (!init_text_p && prog_bfd != NULL) | |
| { | |
| init_text_p = 1; | |
| for (s = prog_bfd->sections; s; s = s->next) | |
| if (strcmp (bfd_get_section_name (prog_bfd, s), ".text") == 0) | |
| { | |
| text = s; | |
| text_start = bfd_get_section_vma (prog_bfd, s); | |
| text_end = text_start + bfd_section_size (prog_bfd, s); | |
| break; | |
| } | |
| } | |
| return (PC << 2) + text_start; | |
| } | |
| static void | |
| do_long (ins) | |
| uint32 ins; | |
| { | |
| struct hash_entry *h; | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_INSTRUCTION) != 0) | |
| (*d10v_callback->printf_filtered) (d10v_callback, "do_long 0x%x\n", ins); | |
| #endif | |
| h = lookup_hash (ins, 1); | |
| if (h == NULL) | |
| return; | |
| get_operands (h->ops, ins); | |
| State.ins_type = INS_LONG; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h->ops->func)(); | |
| } | |
| static void | |
| do_2_short (ins1, ins2, leftright) | |
| uint16 ins1, ins2; | |
| enum _leftright leftright; | |
| { | |
| struct hash_entry *h; | |
| enum _ins_type first, second; | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_INSTRUCTION) != 0) | |
| (*d10v_callback->printf_filtered) (d10v_callback, "do_2_short 0x%x (%s) -> 0x%x\n", | |
| ins1, (leftright) ? "left" : "right", ins2); | |
| #endif | |
| if (leftright == LEFT_FIRST) | |
| { | |
| first = INS_LEFT; | |
| second = INS_RIGHT; | |
| ins_type_counters[ (int)INS_LEFTRIGHT ]++; | |
| } | |
| else | |
| { | |
| first = INS_RIGHT; | |
| second = INS_LEFT; | |
| ins_type_counters[ (int)INS_RIGHTLEFT ]++; | |
| } | |
| /* Issue the first instruction */ | |
| h = lookup_hash (ins1, 0); | |
| if (h == NULL) | |
| return; | |
| get_operands (h->ops, ins1); | |
| State.ins_type = first; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h->ops->func)(); | |
| /* Issue the second instruction (if the PC hasn't changed) */ | |
| if (!State.pc_changed && !State.exception) | |
| { | |
| /* finish any existing instructions */ | |
| SLOT_FLUSH (); | |
| h = lookup_hash (ins2, 0); | |
| if (h == NULL) | |
| return; | |
| get_operands (h->ops, ins2); | |
| State.ins_type = second; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| ins_type_counters[ (int)INS_CYCLES ]++; | |
| (h->ops->func)(); | |
| } | |
| else if (!State.exception) | |
| ins_type_counters[ (int)INS_COND_JUMP ]++; | |
| } | |
| static void | |
| do_parallel (ins1, ins2) | |
| uint16 ins1, ins2; | |
| { | |
| struct hash_entry *h1, *h2; | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_INSTRUCTION) != 0) | |
| (*d10v_callback->printf_filtered) (d10v_callback, "do_parallel 0x%x || 0x%x\n", ins1, ins2); | |
| #endif | |
| ins_type_counters[ (int)INS_PARALLEL ]++; | |
| h1 = lookup_hash (ins1, 0); | |
| if (h1 == NULL) | |
| return; | |
| h2 = lookup_hash (ins2, 0); | |
| if (h2 == NULL) | |
| return; | |
| if (h1->ops->exec_type == PARONLY) | |
| { | |
| get_operands (h1->ops, ins1); | |
| State.ins_type = INS_LEFT_COND_TEST; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h1->ops->func)(); | |
| if (State.exe) | |
| { | |
| ins_type_counters[ (int)INS_COND_TRUE ]++; | |
| get_operands (h2->ops, ins2); | |
| State.ins_type = INS_RIGHT_COND_EXE; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h2->ops->func)(); | |
| } | |
| else | |
| ins_type_counters[ (int)INS_COND_FALSE ]++; | |
| } | |
| else if (h2->ops->exec_type == PARONLY) | |
| { | |
| get_operands (h2->ops, ins2); | |
| State.ins_type = INS_RIGHT_COND_TEST; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h2->ops->func)(); | |
| if (State.exe) | |
| { | |
| ins_type_counters[ (int)INS_COND_TRUE ]++; | |
| get_operands (h1->ops, ins1); | |
| State.ins_type = INS_LEFT_COND_EXE; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h1->ops->func)(); | |
| } | |
| else | |
| ins_type_counters[ (int)INS_COND_FALSE ]++; | |
| } | |
| else | |
| { | |
| get_operands (h1->ops, ins1); | |
| State.ins_type = INS_LEFT_PARALLEL; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h1->ops->func)(); | |
| if (!State.exception) | |
| { | |
| get_operands (h2->ops, ins2); | |
| State.ins_type = INS_RIGHT_PARALLEL; | |
| ins_type_counters[ (int)State.ins_type ]++; | |
| (h2->ops->func)(); | |
| } | |
| } | |
| } | |
| static char * | |
| add_commas(buf, sizeof_buf, value) | |
| char *buf; | |
| int sizeof_buf; | |
| unsigned long value; | |
| { | |
| int comma = 3; | |
| char *endbuf = buf + sizeof_buf - 1; | |
| *--endbuf = '\0'; | |
| do { | |
| if (comma-- == 0) | |
| { | |
| *--endbuf = ','; | |
| comma = 2; | |
| } | |
| *--endbuf = (value % 10) + '0'; | |
| } while ((value /= 10) != 0); | |
| return endbuf; | |
| } | |
| void | |
| sim_size (power) | |
| int power; | |
| { | |
| int i; | |
| for (i = 0; i < IMEM_SEGMENTS; i++) | |
| { | |
| if (State.mem.insn[i]) | |
| free (State.mem.insn[i]); | |
| } | |
| for (i = 0; i < DMEM_SEGMENTS; i++) | |
| { | |
| if (State.mem.data[i]) | |
| free (State.mem.data[i]); | |
| } | |
| for (i = 0; i < UMEM_SEGMENTS; i++) | |
| { | |
| if (State.mem.unif[i]) | |
| free (State.mem.unif[i]); | |
| } | |
| /* Always allocate dmem segment 0. This contains the IMAP and DMAP | |
| registers. */ | |
| State.mem.data[0] = calloc (1, SEGMENT_SIZE); | |
| } | |
| /* For tracing - leave info on last access around. */ | |
| static char *last_segname = "invalid"; | |
| static char *last_from = "invalid"; | |
| static char *last_to = "invalid"; | |
| enum | |
| { | |
| IMAP0_OFFSET = 0xff00, | |
| DMAP0_OFFSET = 0xff08, | |
| DMAP2_SHADDOW = 0xff04, | |
| DMAP2_OFFSET = 0xff0c | |
| }; | |
| static void | |
| set_dmap_register (int reg_nr, unsigned long value) | |
| { | |
| uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA | |
| + DMAP0_OFFSET + 2 * reg_nr); | |
| WRITE_16 (raw, value); | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_MEMORY)) | |
| { | |
| (*d10v_callback->printf_filtered) | |
| (d10v_callback, "mem: dmap%d=0x%04lx\n", reg_nr, value); | |
| } | |
| #endif | |
| } | |
| static unsigned long | |
| dmap_register (void *regcache, int reg_nr) | |
| { | |
| uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA | |
| + DMAP0_OFFSET + 2 * reg_nr); | |
| return READ_16 (raw); | |
| } | |
| static void | |
| set_imap_register (int reg_nr, unsigned long value) | |
| { | |
| uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA | |
| + IMAP0_OFFSET + 2 * reg_nr); | |
| WRITE_16 (raw, value); | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_MEMORY)) | |
| { | |
| (*d10v_callback->printf_filtered) | |
| (d10v_callback, "mem: imap%d=0x%04lx\n", reg_nr, value); | |
| } | |
| #endif | |
| } | |
| static unsigned long | |
| imap_register (void *regcache, int reg_nr) | |
| { | |
| uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA | |
| + IMAP0_OFFSET + 2 * reg_nr); | |
| return READ_16 (raw); | |
| } | |
| enum | |
| { | |
| HELD_SPI_IDX = 0, | |
| HELD_SPU_IDX = 1 | |
| }; | |
| static unsigned long | |
| spu_register (void) | |
| { | |
| if (PSW_SM) | |
| return GPR (SP_IDX); | |
| else | |
| return HELD_SP (HELD_SPU_IDX); | |
| } | |
| static unsigned long | |
| spi_register (void) | |
| { | |
| if (!PSW_SM) | |
| return GPR (SP_IDX); | |
| else | |
| return HELD_SP (HELD_SPI_IDX); | |
| } | |
| static void | |
| set_spi_register (unsigned long value) | |
| { | |
| if (!PSW_SM) | |
| SET_GPR (SP_IDX, value); | |
| SET_HELD_SP (HELD_SPI_IDX, value); | |
| } | |
| static void | |
| set_spu_register (unsigned long value) | |
| { | |
| if (PSW_SM) | |
| SET_GPR (SP_IDX, value); | |
| SET_HELD_SP (HELD_SPU_IDX, value); | |
| } | |
| /* Given a virtual address in the DMAP address space, translate it | |
| into a physical address. */ | |
| unsigned long | |
| sim_d10v_translate_dmap_addr (unsigned long offset, | |
| int nr_bytes, | |
| unsigned long *phys, | |
| void *regcache, | |
| unsigned long (*dmap_register) (void *regcache, | |
| int reg_nr)) | |
| { | |
| short map; | |
| int regno; | |
| last_from = "logical-data"; | |
| if (offset >= DMAP_BLOCK_SIZE * SIM_D10V_NR_DMAP_REGS) | |
| { | |
| /* Logical address out side of data segments, not supported */ | |
| return 0; | |
| } | |
| regno = (offset / DMAP_BLOCK_SIZE); | |
| offset = (offset % DMAP_BLOCK_SIZE); | |
| if ((offset % DMAP_BLOCK_SIZE) + nr_bytes > DMAP_BLOCK_SIZE) | |
| { | |
| /* Don't cross a BLOCK boundary */ | |
| nr_bytes = DMAP_BLOCK_SIZE - (offset % DMAP_BLOCK_SIZE); | |
| } | |
| map = dmap_register (regcache, regno); | |
| if (regno == 3) | |
| { | |
| /* Always maps to data memory */ | |
| int iospi = (offset / 0x1000) % 4; | |
| int iosp = (map >> (4 * (3 - iospi))) % 0x10; | |
| last_to = "io-space"; | |
| *phys = (SIM_D10V_MEMORY_DATA + (iosp * 0x10000) + 0xc000 + offset); | |
| } | |
| else | |
| { | |
| int sp = ((map & 0x3000) >> 12); | |
| int segno = (map & 0x3ff); | |
| switch (sp) | |
| { | |
| case 0: /* 00: Unified memory */ | |
| *phys = SIM_D10V_MEMORY_UNIFIED + (segno * DMAP_BLOCK_SIZE) + offset; | |
| last_to = "unified"; | |
| break; | |
| case 1: /* 01: Instruction Memory */ | |
| *phys = SIM_D10V_MEMORY_INSN + (segno * DMAP_BLOCK_SIZE) + offset; | |
| last_to = "chip-insn"; | |
| break; | |
| case 2: /* 10: Internal data memory */ | |
| *phys = SIM_D10V_MEMORY_DATA + (segno << 16) + (regno * DMAP_BLOCK_SIZE) + offset; | |
| last_to = "chip-data"; | |
| break; | |
| case 3: /* 11: Reserved */ | |
| return 0; | |
| } | |
| } | |
| return nr_bytes; | |
| } | |
| /* Given a virtual address in the IMAP address space, translate it | |
| into a physical address. */ | |
| unsigned long | |
| sim_d10v_translate_imap_addr (unsigned long offset, | |
| int nr_bytes, | |
| unsigned long *phys, | |
| void *regcache, | |
| unsigned long (*imap_register) (void *regcache, | |
| int reg_nr)) | |
| { | |
| short map; | |
| int regno; | |
| int sp; | |
| int segno; | |
| last_from = "logical-insn"; | |
| if (offset >= (IMAP_BLOCK_SIZE * SIM_D10V_NR_IMAP_REGS)) | |
| { | |
| /* Logical address outside of IMAP segments, not supported */ | |
| return 0; | |
| } | |
| regno = (offset / IMAP_BLOCK_SIZE); | |
| offset = (offset % IMAP_BLOCK_SIZE); | |
| if (offset + nr_bytes > IMAP_BLOCK_SIZE) | |
| { | |
| /* Don't cross a BLOCK boundary */ | |
| nr_bytes = IMAP_BLOCK_SIZE - offset; | |
| } | |
| map = imap_register (regcache, regno); | |
| sp = (map & 0x3000) >> 12; | |
| segno = (map & 0x007f); | |
| switch (sp) | |
| { | |
| case 0: /* 00: unified memory */ | |
| *phys = SIM_D10V_MEMORY_UNIFIED + (segno << 17) + offset; | |
| last_to = "unified"; | |
| break; | |
| case 1: /* 01: instruction memory */ | |
| *phys = SIM_D10V_MEMORY_INSN + (IMAP_BLOCK_SIZE * regno) + offset; | |
| last_to = "chip-insn"; | |
| break; | |
| case 2: /*10*/ | |
| /* Reserved. */ | |
| return 0; | |
| case 3: /* 11: for testing - instruction memory */ | |
| offset = (offset % 0x800); | |
| *phys = SIM_D10V_MEMORY_INSN + offset; | |
| if (offset + nr_bytes > 0x800) | |
| /* don't cross VM boundary */ | |
| nr_bytes = 0x800 - offset; | |
| last_to = "test-insn"; | |
| break; | |
| } | |
| return nr_bytes; | |
| } | |
| unsigned long | |
| sim_d10v_translate_addr (unsigned long memaddr, | |
| int nr_bytes, | |
| unsigned long *targ_addr, | |
| void *regcache, | |
| unsigned long (*dmap_register) (void *regcache, | |
| int reg_nr), | |
| unsigned long (*imap_register) (void *regcache, | |
| int reg_nr)) | |
| { | |
| unsigned long phys; | |
| unsigned long seg; | |
| unsigned long off; | |
| last_from = "unknown"; | |
| last_to = "unknown"; | |
| seg = (memaddr >> 24); | |
| off = (memaddr & 0xffffffL); | |
| /* However, if we've asked to use the previous generation of segment | |
| mapping, rearrange the segments as follows. */ | |
| if (old_segment_mapping) | |
| { | |
| switch (seg) | |
| { | |
| case 0x00: /* DMAP translated memory */ | |
| seg = 0x10; | |
| break; | |
| case 0x01: /* IMAP translated memory */ | |
| seg = 0x11; | |
| break; | |
| case 0x10: /* On-chip data memory */ | |
| seg = 0x02; | |
| break; | |
| case 0x11: /* On-chip insn memory */ | |
| seg = 0x01; | |
| break; | |
| case 0x12: /* Unified memory */ | |
| seg = 0x00; | |
| break; | |
| } | |
| } | |
| switch (seg) | |
| { | |
| case 0x00: /* Physical unified memory */ | |
| last_from = "phys-unified"; | |
| last_to = "unified"; | |
| phys = SIM_D10V_MEMORY_UNIFIED + off; | |
| if ((off % SEGMENT_SIZE) + nr_bytes > SEGMENT_SIZE) | |
| nr_bytes = SEGMENT_SIZE - (off % SEGMENT_SIZE); | |
| break; | |
| case 0x01: /* Physical instruction memory */ | |
| last_from = "phys-insn"; | |
| last_to = "chip-insn"; | |
| phys = SIM_D10V_MEMORY_INSN + off; | |
| if ((off % SEGMENT_SIZE) + nr_bytes > SEGMENT_SIZE) | |
| nr_bytes = SEGMENT_SIZE - (off % SEGMENT_SIZE); | |
| break; | |
| case 0x02: /* Physical data memory segment */ | |
| last_from = "phys-data"; | |
| last_to = "chip-data"; | |
| phys = SIM_D10V_MEMORY_DATA + off; | |
| if ((off % SEGMENT_SIZE) + nr_bytes > SEGMENT_SIZE) | |
| nr_bytes = SEGMENT_SIZE - (off % SEGMENT_SIZE); | |
| break; | |
| case 0x10: /* in logical data address segment */ | |
| nr_bytes = sim_d10v_translate_dmap_addr (off, nr_bytes, &phys, regcache, | |
| dmap_register); | |
| break; | |
| case 0x11: /* in logical instruction address segment */ | |
| nr_bytes = sim_d10v_translate_imap_addr (off, nr_bytes, &phys, regcache, | |
| imap_register); | |
| break; | |
| default: | |
| return 0; | |
| } | |
| *targ_addr = phys; | |
| return nr_bytes; | |
| } | |
| /* Return a pointer into the raw buffer designated by phys_addr. It | |
| is assumed that the client has already ensured that the access | |
| isn't going to cross a segment boundary. */ | |
| uint8 * | |
| map_memory (unsigned phys_addr) | |
| { | |
| uint8 **memory; | |
| uint8 *raw; | |
| unsigned offset; | |
| int segment = ((phys_addr >> 24) & 0xff); | |
| switch (segment) | |
| { | |
| case 0x00: /* Unified memory */ | |
| { | |
| memory = &State.mem.unif[(phys_addr / SEGMENT_SIZE) % UMEM_SEGMENTS]; | |
| last_segname = "umem"; | |
| break; | |
| } | |
| case 0x01: /* On-chip insn memory */ | |
| { | |
| memory = &State.mem.insn[(phys_addr / SEGMENT_SIZE) % IMEM_SEGMENTS]; | |
| last_segname = "imem"; | |
| break; | |
| } | |
| case 0x02: /* On-chip data memory */ | |
| { | |
| if ((phys_addr & 0xff00) == 0xff00) | |
| { | |
| phys_addr = (phys_addr & 0xffff); | |
| if (phys_addr == DMAP2_SHADDOW) | |
| { | |
| phys_addr = DMAP2_OFFSET; | |
| last_segname = "dmap"; | |
| } | |
| else | |
| last_segname = "reg"; | |
| } | |
| else | |
| last_segname = "dmem"; | |
| memory = &State.mem.data[(phys_addr / SEGMENT_SIZE) % DMEM_SEGMENTS]; | |
| break; | |
| } | |
| default: | |
| /* OOPS! */ | |
| last_segname = "scrap"; | |
| return State.mem.fault; | |
| } | |
| if (*memory == NULL) | |
| { | |
| *memory = calloc (1, SEGMENT_SIZE); | |
| if (*memory == NULL) | |
| { | |
| (*d10v_callback->printf_filtered) (d10v_callback, "Malloc failed.\n"); | |
| return State.mem.fault; | |
| } | |
| } | |
| offset = (phys_addr % SEGMENT_SIZE); | |
| raw = *memory + offset; | |
| return raw; | |
| } | |
| /* Transfer data to/from simulated memory. Since a bug in either the | |
| simulated program or in gdb or the simulator itself may cause a | |
| bogus address to be passed in, we need to do some sanity checking | |
| on addresses to make sure they are within bounds. When an address | |
| fails the bounds check, treat it as a zero length read/write rather | |
| than aborting the entire run. */ | |
| static int | |
| xfer_mem (SIM_ADDR virt, | |
| unsigned char *buffer, | |
| int size, | |
| int write_p) | |
| { | |
| uint8 *memory; | |
| unsigned long phys; | |
| int phys_size; | |
| phys_size = sim_d10v_translate_addr (virt, size, &phys, NULL, | |
| dmap_register, imap_register); | |
| if (phys_size == 0) | |
| return 0; | |
| memory = map_memory (phys); | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_INSTRUCTION) != 0) | |
| { | |
| (*d10v_callback->printf_filtered) | |
| (d10v_callback, | |
| "sim_%s %d bytes: 0x%08lx (%s) -> 0x%08lx (%s) -> 0x%08lx (%s)\n", | |
| (write_p ? "write" : "read"), | |
| phys_size, virt, last_from, | |
| phys, last_to, | |
| (long) memory, last_segname); | |
| } | |
| #endif | |
| if (write_p) | |
| { | |
| memcpy (memory, buffer, phys_size); | |
| } | |
| else | |
| { | |
| memcpy (buffer, memory, phys_size); | |
| } | |
| return phys_size; | |
| } | |
| int | |
| sim_write (sd, addr, buffer, size) | |
| SIM_DESC sd; | |
| SIM_ADDR addr; | |
| const unsigned char *buffer; | |
| int size; | |
| { | |
| /* FIXME: this should be performing a virtual transfer */ | |
| return xfer_mem( addr, buffer, size, 1); | |
| } | |
| int | |
| sim_read (sd, addr, buffer, size) | |
| SIM_DESC sd; | |
| SIM_ADDR addr; | |
| unsigned char *buffer; | |
| int size; | |
| { | |
| /* FIXME: this should be performing a virtual transfer */ | |
| return xfer_mem( addr, buffer, size, 0); | |
| } | |
| SIM_DESC | |
| sim_open (kind, callback, abfd, argv) | |
| SIM_OPEN_KIND kind; | |
| host_callback *callback; | |
| struct bfd *abfd; | |
| char **argv; | |
| { | |
| struct simops *s; | |
| struct hash_entry *h; | |
| static int init_p = 0; | |
| char **p; | |
| sim_kind = kind; | |
| d10v_callback = callback; | |
| myname = argv[0]; | |
| old_segment_mapping = 0; | |
| /* NOTE: This argument parsing is only effective when this function | |
| is called by GDB. Standalone argument parsing is handled by | |
| sim/common/run.c. */ | |
| for (p = argv + 1; *p; ++p) | |
| { | |
| if (strcmp (*p, "-oldseg") == 0) | |
| old_segment_mapping = 1; | |
| #ifdef DEBUG | |
| else if (strcmp (*p, "-t") == 0) | |
| d10v_debug = DEBUG; | |
| else if (strncmp (*p, "-t", 2) == 0) | |
| d10v_debug = atoi (*p + 2); | |
| #endif | |
| else | |
| (*d10v_callback->printf_filtered) (d10v_callback, "ERROR: unsupported option(s): %s\n",*p); | |
| } | |
| /* put all the opcodes in the hash table */ | |
| if (!init_p++) | |
| { | |
| for (s = Simops; s->func; s++) | |
| { | |
| h = &hash_table[hash(s->opcode,s->format)]; | |
| /* go to the last entry in the chain */ | |
| while (h->next) | |
| h = h->next; | |
| if (h->ops) | |
| { | |
| h->next = (struct hash_entry *) calloc(1,sizeof(struct hash_entry)); | |
| if (!h->next) | |
| perror ("malloc failure"); | |
| h = h->next; | |
| } | |
| h->ops = s; | |
| h->mask = s->mask; | |
| h->opcode = s->opcode; | |
| h->size = s->is_long; | |
| } | |
| } | |
| /* reset the processor state */ | |
| if (!State.mem.data[0]) | |
| sim_size (1); | |
| sim_create_inferior ((SIM_DESC) 1, NULL, NULL, NULL); | |
| /* Fudge our descriptor. */ | |
| return (SIM_DESC) 1; | |
| } | |
| void | |
| sim_close (sd, quitting) | |
| SIM_DESC sd; | |
| int quitting; | |
| { | |
| if (prog_bfd != NULL && prog_bfd_was_opened_p) | |
| { | |
| bfd_close (prog_bfd); | |
| prog_bfd = NULL; | |
| prog_bfd_was_opened_p = 0; | |
| } | |
| } | |
| void | |
| sim_set_profile (n) | |
| int n; | |
| { | |
| (*d10v_callback->printf_filtered) (d10v_callback, "sim_set_profile %d\n",n); | |
| } | |
| void | |
| sim_set_profile_size (n) | |
| int n; | |
| { | |
| (*d10v_callback->printf_filtered) (d10v_callback, "sim_set_profile_size %d\n",n); | |
| } | |
| uint8 * | |
| dmem_addr (uint16 offset) | |
| { | |
| unsigned long phys; | |
| uint8 *mem; | |
| int phys_size; | |
| /* Note: DMEM address range is 0..0x10000. Calling code can compute | |
| things like ``0xfffe + 0x0e60 == 0x10e5d''. Since offset's type | |
| is uint16 this is modulo'ed onto 0x0e5d. */ | |
| phys_size = sim_d10v_translate_dmap_addr (offset, 1, &phys, NULL, | |
| dmap_register); | |
| if (phys_size == 0) | |
| { | |
| mem = State.mem.fault; | |
| } | |
| else | |
| mem = map_memory (phys); | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_MEMORY)) | |
| { | |
| (*d10v_callback->printf_filtered) | |
| (d10v_callback, | |
| "mem: 0x%08x (%s) -> 0x%08lx %d (%s) -> 0x%08lx (%s)\n", | |
| offset, last_from, | |
| phys, phys_size, last_to, | |
| (long) mem, last_segname); | |
| } | |
| #endif | |
| return mem; | |
| } | |
| uint8 * | |
| imem_addr (uint32 offset) | |
| { | |
| unsigned long phys; | |
| uint8 *mem; | |
| int phys_size = sim_d10v_translate_imap_addr (offset, 1, &phys, NULL, | |
| imap_register); | |
| if (phys_size == 0) | |
| { | |
| return State.mem.fault; | |
| } | |
| mem = map_memory (phys); | |
| #ifdef DEBUG | |
| if ((d10v_debug & DEBUG_MEMORY)) | |
| { | |
| (*d10v_callback->printf_filtered) | |
| (d10v_callback, | |
| "mem: 0x%08x (%s) -> 0x%08lx %d (%s) -> 0x%08lx (%s)\n", | |
| offset, last_from, | |
| phys, phys_size, last_to, | |
| (long) mem, last_segname); | |
| } | |
| #endif | |
| return mem; | |
| } | |
| static int stop_simulator = 0; | |
| int | |
| sim_stop (sd) | |
| SIM_DESC sd; | |
| { | |
| stop_simulator = 1; | |
| return 1; | |
| } | |
| /* Run (or resume) the program. */ | |
| void | |
| sim_resume (sd, step, siggnal) | |
| SIM_DESC sd; | |
| int step, siggnal; | |
| { | |
| uint32 inst; | |
| uint8 *iaddr; | |
| /* (*d10v_callback->printf_filtered) (d10v_callback, "sim_resume (%d,%d) PC=0x%x\n",step,siggnal,PC); */ | |
| State.exception = 0; | |
| if (step) | |
| sim_stop (sd); | |
| switch (siggnal) | |
| { | |
| case 0: | |
| break; | |
| #ifdef SIGBUS | |
| case SIGBUS: | |
| #endif | |
| case SIGSEGV: | |
| SET_BPC (PC); | |
| SET_BPSW (PSW); | |
| SET_HW_PSW ((PSW & (PSW_F0_BIT | PSW_F1_BIT | PSW_C_BIT))); | |
| JMP (AE_VECTOR_START); | |
| SLOT_FLUSH (); | |
| break; | |
| case SIGILL: | |
| SET_BPC (PC); | |
| SET_BPSW (PSW); | |
| SET_HW_PSW ((PSW & (PSW_F0_BIT | PSW_F1_BIT | PSW_C_BIT))); | |
| JMP (RIE_VECTOR_START); | |
| SLOT_FLUSH (); | |
| break; | |
| default: | |
| /* just ignore it */ | |
| break; | |
| } | |
| do | |
| { | |
| iaddr = imem_addr ((uint32)PC << 2); | |
| if (iaddr == State.mem.fault) | |
| { | |
| State.exception = SIGBUS; | |
| break; | |
| } | |
| inst = get_longword( iaddr ); | |
| State.pc_changed = 0; | |
| ins_type_counters[ (int)INS_CYCLES ]++; | |
| switch (inst & 0xC0000000) | |
| { | |
| case 0xC0000000: | |
| /* long instruction */ | |
| do_long (inst & 0x3FFFFFFF); | |
| break; | |
| case 0x80000000: | |
| /* R -> L */ | |
| do_2_short ( inst & 0x7FFF, (inst & 0x3FFF8000) >> 15, RIGHT_FIRST); | |
| break; | |
| case 0x40000000: | |
| /* L -> R */ | |
| do_2_short ((inst & 0x3FFF8000) >> 15, inst & 0x7FFF, LEFT_FIRST); | |
| break; | |
| case 0: | |
| do_parallel ((inst & 0x3FFF8000) >> 15, inst & 0x7FFF); | |
| break; | |
| } | |
| /* If the PC of the current instruction matches RPT_E then | |
| schedule a branch to the loop start. If one of those | |
| instructions happens to be a branch, than that instruction | |
| will be ignored */ | |
| if (!State.pc_changed) | |
| { | |
| if (PSW_RP && PC == RPT_E) | |
| { | |
| /* Note: The behavour of a branch instruction at RPT_E | |
| is implementation dependant, this simulator takes the | |
| branch. Branching to RPT_E is valid, the instruction | |
| must be executed before the loop is taken. */ | |
| if (RPT_C == 1) | |
| { | |
| SET_PSW_RP (0); | |
| SET_RPT_C (0); | |
| SET_PC (PC + 1); | |
| } | |
| else | |
| { | |
| SET_RPT_C (RPT_C - 1); | |
| SET_PC (RPT_S); | |
| } | |
| } | |
| else | |
| SET_PC (PC + 1); | |
| } | |
| /* Check for a breakpoint trap on this instruction. This | |
| overrides any pending branches or loops */ | |
| if (PSW_DB && PC == IBA) | |
| { | |
| SET_BPC (PC); | |
| SET_BPSW (PSW); | |
| SET_PSW (PSW & PSW_SM_BIT); | |
| SET_PC (SDBT_VECTOR_START); | |
| } | |
| /* Writeback all the DATA / PC changes */ | |
| SLOT_FLUSH (); | |
| #ifdef NEED_UI_LOOP_HOOK | |
| if (deprecated_ui_loop_hook != NULL && ui_loop_hook_counter-- < 0) | |
| { | |
| ui_loop_hook_counter = UI_LOOP_POLL_INTERVAL; | |
| deprecated_ui_loop_hook (0); | |
| } | |
| #endif /* NEED_UI_LOOP_HOOK */ | |
| } | |
| while ( !State.exception && !stop_simulator); | |
| if (step && !State.exception) | |
| State.exception = SIGTRAP; | |
| } | |
| void | |
| sim_set_trace (void) | |
| { | |
| #ifdef DEBUG | |
| d10v_debug = DEBUG; | |
| #endif | |
| } | |
| void | |
| sim_info (sd, verbose) | |
| SIM_DESC sd; | |
| int verbose; | |
| { | |
| char buf1[40]; | |
| char buf2[40]; | |
| char buf3[40]; | |
| char buf4[40]; | |
| char buf5[40]; | |
| unsigned long left = ins_type_counters[ (int)INS_LEFT ] + ins_type_counters[ (int)INS_LEFT_COND_EXE ]; | |
| unsigned long left_nops = ins_type_counters[ (int)INS_LEFT_NOPS ]; | |
| unsigned long left_parallel = ins_type_counters[ (int)INS_LEFT_PARALLEL ]; | |
| unsigned long left_cond = ins_type_counters[ (int)INS_LEFT_COND_TEST ]; | |
| unsigned long left_total = left + left_parallel + left_cond + left_nops; | |
| unsigned long right = ins_type_counters[ (int)INS_RIGHT ] + ins_type_counters[ (int)INS_RIGHT_COND_EXE ]; | |
| unsigned long right_nops = ins_type_counters[ (int)INS_RIGHT_NOPS ]; | |
| unsigned long right_parallel = ins_type_counters[ (int)INS_RIGHT_PARALLEL ]; | |
| unsigned long right_cond = ins_type_counters[ (int)INS_RIGHT_COND_TEST ]; | |
| unsigned long right_total = right + right_parallel + right_cond + right_nops; | |
| unsigned long unknown = ins_type_counters[ (int)INS_UNKNOWN ]; | |
| unsigned long ins_long = ins_type_counters[ (int)INS_LONG ]; | |
| unsigned long parallel = ins_type_counters[ (int)INS_PARALLEL ]; | |
| unsigned long leftright = ins_type_counters[ (int)INS_LEFTRIGHT ]; | |
| unsigned long rightleft = ins_type_counters[ (int)INS_RIGHTLEFT ]; | |
| unsigned long cond_true = ins_type_counters[ (int)INS_COND_TRUE ]; | |
| unsigned long cond_false = ins_type_counters[ (int)INS_COND_FALSE ]; | |
| unsigned long cond_jump = ins_type_counters[ (int)INS_COND_JUMP ]; | |
| unsigned long cycles = ins_type_counters[ (int)INS_CYCLES ]; | |
| unsigned long total = (unknown + left_total + right_total + ins_long); | |
| int size = strlen (add_commas (buf1, sizeof (buf1), total)); | |
| int parallel_size = strlen (add_commas (buf1, sizeof (buf1), | |
| (left_parallel > right_parallel) ? left_parallel : right_parallel)); | |
| int cond_size = strlen (add_commas (buf1, sizeof (buf1), (left_cond > right_cond) ? left_cond : right_cond)); | |
| int nop_size = strlen (add_commas (buf1, sizeof (buf1), (left_nops > right_nops) ? left_nops : right_nops)); | |
| int normal_size = strlen (add_commas (buf1, sizeof (buf1), (left > right) ? left : right)); | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s left instruction(s), %*s normal, %*s parallel, %*s EXExxx, %*s nops\n", | |
| size, add_commas (buf1, sizeof (buf1), left_total), | |
| normal_size, add_commas (buf2, sizeof (buf2), left), | |
| parallel_size, add_commas (buf3, sizeof (buf3), left_parallel), | |
| cond_size, add_commas (buf4, sizeof (buf4), left_cond), | |
| nop_size, add_commas (buf5, sizeof (buf5), left_nops)); | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s right instruction(s), %*s normal, %*s parallel, %*s EXExxx, %*s nops\n", | |
| size, add_commas (buf1, sizeof (buf1), right_total), | |
| normal_size, add_commas (buf2, sizeof (buf2), right), | |
| parallel_size, add_commas (buf3, sizeof (buf3), right_parallel), | |
| cond_size, add_commas (buf4, sizeof (buf4), right_cond), | |
| nop_size, add_commas (buf5, sizeof (buf5), right_nops)); | |
| if (ins_long) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s long instruction(s)\n", | |
| size, add_commas (buf1, sizeof (buf1), ins_long)); | |
| if (parallel) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s parallel instruction(s)\n", | |
| size, add_commas (buf1, sizeof (buf1), parallel)); | |
| if (leftright) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s instruction(s) encoded L->R\n", | |
| size, add_commas (buf1, sizeof (buf1), leftright)); | |
| if (rightleft) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s instruction(s) encoded R->L\n", | |
| size, add_commas (buf1, sizeof (buf1), rightleft)); | |
| if (unknown) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s unknown instruction(s)\n", | |
| size, add_commas (buf1, sizeof (buf1), unknown)); | |
| if (cond_true) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s instruction(s) due to EXExxx condition being true\n", | |
| size, add_commas (buf1, sizeof (buf1), cond_true)); | |
| if (cond_false) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "skipped %*s instruction(s) due to EXExxx condition being false\n", | |
| size, add_commas (buf1, sizeof (buf1), cond_false)); | |
| if (cond_jump) | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "skipped %*s instruction(s) due to conditional branch succeeding\n", | |
| size, add_commas (buf1, sizeof (buf1), cond_jump)); | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s cycle(s)\n", | |
| size, add_commas (buf1, sizeof (buf1), cycles)); | |
| (*d10v_callback->printf_filtered) (d10v_callback, | |
| "executed %*s total instructions\n", | |
| size, add_commas (buf1, sizeof (buf1), total)); | |
| } | |
| SIM_RC | |
| sim_create_inferior (sd, abfd, argv, env) | |
| SIM_DESC sd; | |
| struct bfd *abfd; | |
| char **argv; | |
| char **env; | |
| { | |
| bfd_vma start_address; | |
| /* reset all state information */ | |
| memset (&State.regs, 0, (int)&State.mem - (int)&State.regs); | |
| /* There was a hack here to copy the values of argc and argv into r0 | |
| and r1. The values were also saved into some high memory that | |
| won't be overwritten by the stack (0x7C00). The reason for doing | |
| this was to allow the 'run' program to accept arguments. Without | |
| the hack, this is not possible anymore. If the simulator is run | |
| from the debugger, arguments cannot be passed in, so this makes | |
| no difference. */ | |
| /* set PC */ | |
| if (abfd != NULL) | |
| start_address = bfd_get_start_address (abfd); | |
| else | |
| start_address = 0xffc0 << 2; | |
| #ifdef DEBUG | |
| if (d10v_debug) | |
| (*d10v_callback->printf_filtered) (d10v_callback, "sim_create_inferior: PC=0x%lx\n", (long) start_address); | |
| #endif | |
| SET_CREG (PC_CR, start_address >> 2); | |
| /* cpu resets imap0 to 0 and imap1 to 0x7f, but D10V-EVA board | |
| initializes imap0 and imap1 to 0x1000 as part of its ROM | |
| initialization. */ | |
| if (old_segment_mapping) | |
| { | |
| /* External memory startup. This is the HARD reset state. */ | |
| set_imap_register (0, 0x0000); | |
| set_imap_register (1, 0x007f); | |
| set_dmap_register (0, 0x2000); | |
| set_dmap_register (1, 0x2000); | |
| set_dmap_register (2, 0x0000); /* Old DMAP */ | |
| set_dmap_register (3, 0x0000); | |
| } | |
| else | |
| { | |
| /* Internal memory startup. This is the ROM intialized state. */ | |
| set_imap_register (0, 0x1000); | |
| set_imap_register (1, 0x1000); | |
| set_dmap_register (0, 0x2000); | |
| set_dmap_register (1, 0x2000); | |
| set_dmap_register (2, 0x2000); /* DMAP2 initial internal value is | |
| 0x2000 on the new board. */ | |
| set_dmap_register (3, 0x0000); | |
| } | |
| SLOT_FLUSH (); | |
| return SIM_RC_OK; | |
| } | |
| void | |
| sim_set_callbacks (p) | |
| host_callback *p; | |
| { | |
| d10v_callback = p; | |
| } | |
| void | |
| sim_stop_reason (sd, reason, sigrc) | |
| SIM_DESC sd; | |
| enum sim_stop *reason; | |
| int *sigrc; | |
| { | |
| /* (*d10v_callback->printf_filtered) (d10v_callback, "sim_stop_reason: PC=0x%x\n",PC<<2); */ | |
| switch (State.exception) | |
| { | |
| case SIG_D10V_STOP: /* stop instruction */ | |
| *reason = sim_exited; | |
| *sigrc = 0; | |
| break; | |
| case SIG_D10V_EXIT: /* exit trap */ | |
| *reason = sim_exited; | |
| *sigrc = GPR (0); | |
| break; | |
| case SIG_D10V_BUS: | |
| *reason = sim_stopped; | |
| *sigrc = TARGET_SIGNAL_BUS; | |
| break; | |
| default: /* some signal */ | |
| *reason = sim_stopped; | |
| if (stop_simulator && !State.exception) | |
| *sigrc = TARGET_SIGNAL_INT; | |
| else | |
| *sigrc = State.exception; | |
| break; | |
| } | |
| stop_simulator = 0; | |
| } | |
| int | |
| sim_fetch_register (sd, rn, memory, length) | |
| SIM_DESC sd; | |
| int rn; | |
| unsigned char *memory; | |
| int length; | |
| { | |
| int size; | |
| switch ((enum sim_d10v_regs) rn) | |
| { | |
| case SIM_D10V_R0_REGNUM: | |
| case SIM_D10V_R1_REGNUM: | |
| case SIM_D10V_R2_REGNUM: | |
| case SIM_D10V_R3_REGNUM: | |
| case SIM_D10V_R4_REGNUM: | |
| case SIM_D10V_R5_REGNUM: | |
| case SIM_D10V_R6_REGNUM: | |
| case SIM_D10V_R7_REGNUM: | |
| case SIM_D10V_R8_REGNUM: | |
| case SIM_D10V_R9_REGNUM: | |
| case SIM_D10V_R10_REGNUM: | |
| case SIM_D10V_R11_REGNUM: | |
| case SIM_D10V_R12_REGNUM: | |
| case SIM_D10V_R13_REGNUM: | |
| case SIM_D10V_R14_REGNUM: | |
| case SIM_D10V_R15_REGNUM: | |
| WRITE_16 (memory, GPR (rn - SIM_D10V_R0_REGNUM)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_CR0_REGNUM: | |
| case SIM_D10V_CR1_REGNUM: | |
| case SIM_D10V_CR2_REGNUM: | |
| case SIM_D10V_CR3_REGNUM: | |
| case SIM_D10V_CR4_REGNUM: | |
| case SIM_D10V_CR5_REGNUM: | |
| case SIM_D10V_CR6_REGNUM: | |
| case SIM_D10V_CR7_REGNUM: | |
| case SIM_D10V_CR8_REGNUM: | |
| case SIM_D10V_CR9_REGNUM: | |
| case SIM_D10V_CR10_REGNUM: | |
| case SIM_D10V_CR11_REGNUM: | |
| case SIM_D10V_CR12_REGNUM: | |
| case SIM_D10V_CR13_REGNUM: | |
| case SIM_D10V_CR14_REGNUM: | |
| case SIM_D10V_CR15_REGNUM: | |
| WRITE_16 (memory, CREG (rn - SIM_D10V_CR0_REGNUM)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_A0_REGNUM: | |
| case SIM_D10V_A1_REGNUM: | |
| WRITE_64 (memory, ACC (rn - SIM_D10V_A0_REGNUM)); | |
| size = 8; | |
| break; | |
| case SIM_D10V_SPI_REGNUM: | |
| /* PSW_SM indicates that the current SP is the USER | |
| stack-pointer. */ | |
| WRITE_16 (memory, spi_register ()); | |
| size = 2; | |
| break; | |
| case SIM_D10V_SPU_REGNUM: | |
| /* PSW_SM indicates that the current SP is the USER | |
| stack-pointer. */ | |
| WRITE_16 (memory, spu_register ()); | |
| size = 2; | |
| break; | |
| case SIM_D10V_IMAP0_REGNUM: | |
| case SIM_D10V_IMAP1_REGNUM: | |
| WRITE_16 (memory, imap_register (NULL, rn - SIM_D10V_IMAP0_REGNUM)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_DMAP0_REGNUM: | |
| case SIM_D10V_DMAP1_REGNUM: | |
| case SIM_D10V_DMAP2_REGNUM: | |
| case SIM_D10V_DMAP3_REGNUM: | |
| WRITE_16 (memory, dmap_register (NULL, rn - SIM_D10V_DMAP0_REGNUM)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_TS2_DMAP_REGNUM: | |
| size = 0; | |
| break; | |
| default: | |
| size = 0; | |
| break; | |
| } | |
| return size; | |
| } | |
| int | |
| sim_store_register (sd, rn, memory, length) | |
| SIM_DESC sd; | |
| int rn; | |
| unsigned char *memory; | |
| int length; | |
| { | |
| int size; | |
| switch ((enum sim_d10v_regs) rn) | |
| { | |
| case SIM_D10V_R0_REGNUM: | |
| case SIM_D10V_R1_REGNUM: | |
| case SIM_D10V_R2_REGNUM: | |
| case SIM_D10V_R3_REGNUM: | |
| case SIM_D10V_R4_REGNUM: | |
| case SIM_D10V_R5_REGNUM: | |
| case SIM_D10V_R6_REGNUM: | |
| case SIM_D10V_R7_REGNUM: | |
| case SIM_D10V_R8_REGNUM: | |
| case SIM_D10V_R9_REGNUM: | |
| case SIM_D10V_R10_REGNUM: | |
| case SIM_D10V_R11_REGNUM: | |
| case SIM_D10V_R12_REGNUM: | |
| case SIM_D10V_R13_REGNUM: | |
| case SIM_D10V_R14_REGNUM: | |
| case SIM_D10V_R15_REGNUM: | |
| SET_GPR (rn - SIM_D10V_R0_REGNUM, READ_16 (memory)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_CR0_REGNUM: | |
| case SIM_D10V_CR1_REGNUM: | |
| case SIM_D10V_CR2_REGNUM: | |
| case SIM_D10V_CR3_REGNUM: | |
| case SIM_D10V_CR4_REGNUM: | |
| case SIM_D10V_CR5_REGNUM: | |
| case SIM_D10V_CR6_REGNUM: | |
| case SIM_D10V_CR7_REGNUM: | |
| case SIM_D10V_CR8_REGNUM: | |
| case SIM_D10V_CR9_REGNUM: | |
| case SIM_D10V_CR10_REGNUM: | |
| case SIM_D10V_CR11_REGNUM: | |
| case SIM_D10V_CR12_REGNUM: | |
| case SIM_D10V_CR13_REGNUM: | |
| case SIM_D10V_CR14_REGNUM: | |
| case SIM_D10V_CR15_REGNUM: | |
| SET_CREG (rn - SIM_D10V_CR0_REGNUM, READ_16 (memory)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_A0_REGNUM: | |
| case SIM_D10V_A1_REGNUM: | |
| SET_ACC (rn - SIM_D10V_A0_REGNUM, READ_64 (memory) & MASK40); | |
| size = 8; | |
| break; | |
| case SIM_D10V_SPI_REGNUM: | |
| /* PSW_SM indicates that the current SP is the USER | |
| stack-pointer. */ | |
| set_spi_register (READ_16 (memory)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_SPU_REGNUM: | |
| set_spu_register (READ_16 (memory)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_IMAP0_REGNUM: | |
| case SIM_D10V_IMAP1_REGNUM: | |
| set_imap_register (rn - SIM_D10V_IMAP0_REGNUM, READ_16(memory)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_DMAP0_REGNUM: | |
| case SIM_D10V_DMAP1_REGNUM: | |
| case SIM_D10V_DMAP2_REGNUM: | |
| case SIM_D10V_DMAP3_REGNUM: | |
| set_dmap_register (rn - SIM_D10V_DMAP0_REGNUM, READ_16(memory)); | |
| size = 2; | |
| break; | |
| case SIM_D10V_TS2_DMAP_REGNUM: | |
| size = 0; | |
| break; | |
| default: | |
| size = 0; | |
| break; | |
| } | |
| SLOT_FLUSH (); | |
| return size; | |
| } | |
| void | |
| sim_do_command (sd, cmd) | |
| SIM_DESC sd; | |
| char *cmd; | |
| { | |
| (*d10v_callback->printf_filtered) (d10v_callback, "sim_do_command: %s\n",cmd); | |
| } | |
| SIM_RC | |
| sim_load (sd, prog, abfd, from_tty) | |
| SIM_DESC sd; | |
| char *prog; | |
| bfd *abfd; | |
| int from_tty; | |
| { | |
| extern bfd *sim_load_file (); /* ??? Don't know where this should live. */ | |
| if (prog_bfd != NULL && prog_bfd_was_opened_p) | |
| { | |
| bfd_close (prog_bfd); | |
| prog_bfd_was_opened_p = 0; | |
| } | |
| prog_bfd = sim_load_file (sd, myname, d10v_callback, prog, abfd, | |
| sim_kind == SIM_OPEN_DEBUG, | |
| 1/*LMA*/, sim_write); | |
| if (prog_bfd == NULL) | |
| return SIM_RC_FAIL; | |
| prog_bfd_was_opened_p = abfd == NULL; | |
| return SIM_RC_OK; | |
| } |