| 2010-05-26 Ozkan Sezer <sezeroz@gmail.com> | |
| * main.c (setup_tcp_console): Check error return from socket() call | |
| by its equality to -1 not by it being negative. | |
| 2010-04-14 Mike Frysinger <vapier@gentoo.org> | |
| * gdb-if.c (sim_write): Add const to buf arg. | |
| * mem.h (mem_put_blk): Add const to bufptr arg. | |
| * mem.c (mem_put_blk): Likewise, and add const to cast. | |
| 2010-01-20 DJ Delorie <dj@redhat.com> | |
| * m32c.opc (MATH_OP): When doing subtraction, also set carry if | |
| the result is zero. | |
| 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
| * configure: Regenerate. | |
| 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
| * config.in: Regenerate. | |
| * configure: Likewise. | |
| * configure: Regenerate. | |
| 2009-08-14 DJ Delorie <dj@redhat.com> | |
| * configure.in: Check for sys/select.h, termios.h, sys/socket.h, | |
| netinet/in.h, and netinet/tcp.h. | |
| * configure: Regenerate. | |
| * config.in: Add those headers. | |
| * main.c: Check for them. | |
| (setup_tcp_console): Disable if no networking. | |
| (main): Note missing networking or termios. | |
| * mem.c: Check for those headers. | |
| (stdin_ready): Disable if no termios. | |
| (m32c_sim_restore_console): Disable if no termios. | |
| (mem_get_byte): Disable console input if no termios. | |
| 2009-01-06 Joel Sherrill <joel.sherrill@oarcorp.com> | |
| * r8c.opc, m32c.opc: Add parentheses to remove warnings. | |
| 2008-10-01 DJ Delorie <dj@redhat.com> | |
| * int.c (trigger_peripheral_interrupt): Clear interrupt pending | |
| bit when peripheral interrupts are serviced. | |
| 2008-07-11 Hans-Peter Nilsson <hp@axis.com> | |
| * configure: Regenerate to track ../common/common.m4 changes. | |
| * config.in: Ditto. | |
| 2008-06-16 DJ Delorie <dj@redhat.com> | |
| * m32c.opc (BRK, GDBBRK): Remove debug logic. | |
| * main.c (main): Add option to set raw console. | |
| * mem.h (m32c_use_raw_console): Declare. | |
| * mem.c (m32c_sim_restore_console): Only restore console if it's | |
| been previously set. | |
| (m32c_use_raw_console): Define. | |
| (mem_get_byte): Set raw console if m32c_use_raw_console is set. | |
| 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> | |
| Daniel Jacobowitz <dan@codesourcery.com> | |
| Joseph Myers <joseph@codesourcery.com> | |
| * configure: Regenerate. | |
| 2008-06-06 DJ Delorie <dj@redhat.com> | |
| * Makefile.in: Add Timer A support. | |
| * cpu.h (m32c_opcode_pc): New. | |
| (in_gdb): New. | |
| * gdb-if.c (sim_open): Add Timer A support. Support unbuffered | |
| console. | |
| * int.c (trigger_interrupt): Manage the U flag properly. | |
| (trigger_based_interrupt): Likewise. | |
| (trigger_fixed_interrupt): New. | |
| (trigger_peripheral_interrupt): New. | |
| * int.h (trigger_peripheral_interrupt): New. | |
| * m32c.opc: Use m32c_opcode_pc throughout, as needed. | |
| (decode_m32c): Detect jump-to-zero with traceback. | |
| (BRK): Try to do the right thing, keeping track of whether we're | |
| in gdb or not, and if the user has provided a handler or not. | |
| (GBRK): Alternate break opcode for gdb, in case the user's app | |
| needs to use BRK for itself. | |
| (BRK2): Implement. | |
| * main.c: Add Timer A support. Support TCP-based console. | |
| (setup_tcp_console): New. | |
| (main): Add Timer A support. Support TCP-based console. | |
| * mem.h (m32c_sim_restore_console): New. | |
| * mem.c: Add Timer A support. Support TCP-based console. | |
| (mem_ptr): Enhance NULL pointer detection. | |
| (stdin_ready): New. | |
| (m32c_sim_restore_console): New. | |
| (mem_get_byte): Check for console input ready. | |
| (update_timer_a): New. | |
| * r8c.opc (SSTR): Use r0l, not r0h. | |
| (REIT): Fix return frame logic. | |
| * reg.c (print_flags): New. | |
| (trace_register_changes): Use it. | |
| (m32c_dump_all_registers): New. | |
| * timer_a.h: New. | |
| * load.c: Fix indentation. | |
| * trace.c: Fix indentation. | |
| * trace.h: Fix indentation. | |
| 2006-06-26 DJ Delorie <dj@redhat.com> | |
| * r8c.opc (decode_r8c): Don't bother reading the destination | |
| before moving a constant into it. Fix borrow comparison for SUB. | |
| 2006-06-13 Richard Earnshaw <rearnsha@arm.com> | |
| * configure: Regenerated. | |
| 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> | |
| * configure: Regenerated. | |
| 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> | |
| * configure: Regenerated. | |
| 2006-03-13 DJ Delorie <dj@redhat.com> | |
| * mem.c (mem_put_byte): Hook simulated UART to stdout. | |
| (mem_put_hi): Hook in simulated trace port. | |
| (mem_get_byte): Hook in simulated uart control port. | |
| * opc2c: Be more picky about matching special comments. | |
| * r8c.opc (shift_op): Limit shift counts to -16..16. | |
| (BMcnd): Map conditional codes. | |
| * reg.c (condition_true): Mask condition code to 4 bits. | |
| * syscalls.c: Include local syscall.h. | |
| * syscall.h: New, copied from libgloss. | |
| 2005-10-06 Jim Blandy <jimb@redhat.com> | |
| Simulator for Renesas M32C and M16C, by DJ Delorie <dj@redhat.com>, | |
| with further work from Jim Blandy <jimb@redhat.com> and | |
| Kevin Buettner <kevinb@redhat.com>. | |
| * ChangeLog: New. | |
| * Makefile.in: New. | |
| * blinky.S: New. | |
| * config.in: New. | |
| * configure: New. | |
| * configure.in: New. | |
| * cpu.h: New. | |
| * gdb-if.c: New. | |
| * gloss.S: New. | |
| * int.c: New. | |
| * int.h: New. | |
| * load.c: New. | |
| * load.h: New. | |
| * m32c.opc: New. | |
| * main.c: New. | |
| * mem.c: New. | |
| * mem.h: New. | |
| * misc.c: New. | |
| * misc.h: New. | |
| * opc2c.c: New. | |
| * r8c.opc: New. | |
| * reg.c: New. | |
| * safe-fgets.c: New. | |
| * safe-fgets.h: New. | |
| * sample.S: New. | |
| * sample.ld: New. | |
| * sample2.c: New. | |
| * srcdest.c: New. | |
| * syscalls.c: New. | |
| * syscalls.h: New. | |
| * trace.c: New. | |
| * trace.h: New. | |