2006-03-31  Michael Snyder  <msnyder@redhat.com>

	User interface for reverse execution.
	* Makefile.in (reverse.c): New file.
	* reverse.c: New file.  User interface for reverse execution.
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index cb7b636..6a22035 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -34,6 +34,12 @@
 	* infrun.c: Make sure to check for EXEC_REVERSE not EXEC_FORWARD,
 	since targets that don't implement execdir will return EXEC_ERROR.
 
+2006-03-31  Michael Snyder  <msnyder@redhat.com>
+
+	User interface for reverse execution.
+	* Makefile.in (reverse.c): New file.
+	* reverse.c: New file.  User interface for reverse execution.
+
 2006-03-31  Andrew Stubbs  <andrew.stubbs@st.com>
 
 	* value.h (struct internalvar): Add field 'endian'.
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 644e9d9..769f558 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -543,7 +543,7 @@
 	objfiles.c osabi.c observer.c \
 	p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 	prologue-value.c \
-	regcache.c reggroups.c remote.c remote-fileio.c \
+	regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 	scm-exp.c scm-lang.c scm-valprint.c \
 	sentinel-frame.c \
 	serial.c ser-base.c ser-unix.c \
@@ -927,7 +927,8 @@
 	signals.o \
 	kod.o kod-cisco.o \
 	gdb-events.o \
-	exec.o bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
+	exec.o reverse.o \
+	bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 	dbxread.o coffread.o coff-pe-read.o elfread.o \
 	dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
 	dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
@@ -2493,6 +2494,8 @@
 remote-utils.o: remote-utils.c $(defs_h) $(gdb_string_h) $(gdbcmd_h) \
 	$(target_h) $(serial_h) $(gdbcore_h) $(inferior_h) $(remote_utils_h) \
 	$(regcache_h)
+reverse.o: reverse.c $(defs_h) $(gdb_string_h) $(target_h) $(cli_cmds_h) \
+	$(cli_decode_h) $(top_h)
 rom68k-rom.o: rom68k-rom.c $(defs_h) $(gdbcore_h) $(target_h) $(monitor_h) \
 	$(serial_h) $(regcache_h) $(value_h) $(m68k_tdep_h)
 rs6000-nat.o: rs6000-nat.c $(defs_h) $(inferior_h) $(target_h) $(gdbcore_h) \
diff --git a/gdb/reverse.c b/gdb/reverse.c
new file mode 100644
index 0000000..0c0d8ac
--- /dev/null
+++ b/gdb/reverse.c
@@ -0,0 +1,197 @@
+/* Reverse execution and reverse debugging.
+
+   Copyright (C) 2006 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor,
+   Boston, MA 02110-1301, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "target.h"
+#include "top.h"
+#include "cli/cli-cmds.h"
+#include "cli/cli-decode.h"
+
+/* User interface for reverse debugging:
+   Set exec-direction / show exec-direction commands
+   (returns error unles target implements to_set_execdir method).  */
+
+static const char exec_forward[] = "forward";
+static const char exec_reverse[] = "reverse";
+static const char *exec_direction = exec_forward;
+static const char *exec_direction_names[] = {
+  exec_forward,
+  exec_reverse,
+  NULL
+};
+
+static void
+set_exec_direction_func (char *args, int from_tty, 
+			 struct cmd_list_element *cmd)
+{
+  if (target_get_execution_direction () != EXEC_ERROR)
+    {
+      enum exec_direction_kind dir = EXEC_ERROR;
+
+      if (!strcmp (exec_direction, exec_forward))
+	dir = EXEC_FORWARD;
+      else if (!strcmp (exec_direction, exec_reverse))
+	dir = EXEC_REVERSE;
+
+      if (target_set_execution_direction (dir) != EXEC_ERROR)
+	return;
+    }
+  error (_("Target `%s' does not support execution-direction."),
+	 target_shortname);
+}
+
+static void
+show_exec_direction_func (struct ui_file *out, int from_tty, 
+			  struct cmd_list_element *cmd, const char *value)
+{
+  enum exec_direction_kind dir = target_get_execution_direction ();
+
+  switch (dir) {
+  case EXEC_FORWARD:
+    fprintf_filtered (out, "Forward.\n");
+    break;
+  case EXEC_REVERSE:
+    fprintf_filtered (out, "Reverse.\n");
+    break;
+  case EXEC_ERROR:
+  default:
+    error (_("Target `%s' does not support execution-direction."),
+	   target_shortname);
+    break;
+  }
+}
+
+/* User interface:
+   reverse-step, reverse-next etc.
+   (returns error unles target implements to_set_execdir method).  */
+
+static void execdir_default (void *notused)
+{
+  /* Return execution direction to default state.  */
+  target_set_execution_direction (EXEC_FORWARD);
+}
+
+static void
+exec_reverse_once (char *cmd, char *args, int from_tty)
+{
+  /* String buffer for command consing.  */
+  char reverse_command[512];
+  enum exec_direction_kind dir = target_get_execution_direction ();
+
+  if (dir == EXEC_ERROR)
+    error (_("Target %s does not support this command."), target_shortname);
+
+  if (dir == EXEC_REVERSE)
+    error (_("Already in reverse mode.  Use '%s' or 'set exec-dir forward'."),
+	   cmd);
+
+  if (target_set_execution_direction (EXEC_REVERSE) == EXEC_ERROR)
+    error (_("Target %s does not support this command."), target_shortname);
+
+  make_cleanup (execdir_default, NULL);
+  sprintf (reverse_command, "%s %s", cmd, args ? args : "");
+  execute_command (reverse_command, from_tty);
+}
+
+static void
+reverse_step (char *args, int from_tty)
+{
+  exec_reverse_once ("step", args, from_tty);
+}
+
+static void
+reverse_stepi (char *args, int from_tty)
+{
+  exec_reverse_once ("stepi", args, from_tty);
+}
+
+static void
+reverse_next (char *args, int from_tty)
+{
+  exec_reverse_once ("next", args, from_tty);
+}
+
+static void
+reverse_nexti (char *args, int from_tty)
+{
+  exec_reverse_once ("nexti", args, from_tty);
+}
+
+static void
+reverse_continue (char *args, int from_tty)
+{
+  exec_reverse_once ("continue", args, from_tty);
+}
+
+static void
+reverse_finish (char *args, int from_tty)
+{
+  exec_reverse_once ("finish", args, from_tty);
+}
+
+void
+_initialize_reverse (void)
+{
+  add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names,
+			&exec_direction, "Set direction of execution.\n\
+Options are 'forward' or 'reverse'.",
+			"Show direction of execution (forward/reverse).",
+			"Tells gdb whether to execute forward or backward.",
+			set_exec_direction_func, show_exec_direction_func,
+			&setlist, &showlist);
+
+  add_com ("reverse-step", class_run, reverse_step, _("\
+Step program backward until it reaches the beginning of another source line.\n\
+Argument N means do this N times (or till program stops for another reason).")
+	   );
+  add_com_alias ("rs", "reverse-step", class_alias, 1);
+
+  add_com ("reverse-next", class_run, reverse_next, _("\
+Step program backward, proceeding through subroutine calls.\n\
+Like the \"reverse-step\" command as long as subroutine calls do not happen;\n\
+when they do, the call is treated as one instruction.\n\
+Argument N means do this N times (or till program stops for another reason).")
+	   );
+  add_com_alias ("rn", "reverse-next", class_alias, 1);
+
+  add_com ("reverse-stepi", class_run, reverse_stepi, _("\
+Step backward exactly one instruction.\n\
+Argument N means do this N times (or till program stops for another reason).")
+	   );
+  add_com_alias ("rsi", "reverse-stepi", class_alias, 0);
+
+  add_com ("reverse-nexti", class_run, reverse_nexti, _("\
+Step backward one instruction, but proceed through called subroutines.\n\
+Argument N means do this N times (or till program stops for another reason).")
+	   );
+  add_com_alias ("rni", "reverse-nexti", class_alias, 0);
+
+  add_com ("reverse-continue", class_run, reverse_continue, _("\
+Continue program being debugged, running in reverse.\n\
+If proceeding from breakpoint, a number N may be used as an argument,\n\
+which means to set the ignore count of that breakpoint to N - 1 (so that\n\
+the breakpoint won't break until the Nth time it is reached)."));
+  add_com_alias ("rc", "reverse-continue", class_alias, 0);
+
+  add_com ("reverse-finish", class_run, reverse_finish, _("\
+Execute backward until just before selected stack frame is called."));
+}