| 2006-03-31 Michael Snyder <msnyder@redhat.com> | |
| Target interface for reverse execution. | |
| * target.h (enum target_waitkind): | |
| Add new wait event, TARGET_WAITKIND_NO_HISTORY. | |
| (enum exec_direction_kind): New enum. | |
| (struct target_ops): New methods to_set_execdir, to_get_execdir. | |
| (target_set_execution_direction): New macro. | |
| (target_get_execution_direction): New macro. | |
| * target.c (update_current_target): Inherit new execdir methods. | |
| * remote.c (remote_get_execdir, remote_set_execdir): New methods. | |
| (_initialize_remote): Add new methods to remote target vector. | |
| (remote_resume): Check for reverse exec direction, and send | |
| appropriate command to target. | |
| (remote_wait): Check target response for NO_HISTORY status. | |
| Execution interface for reverse execution. | |
| * breakpoint.c (breakpoint_silence): New function. | |
| * breakpoint.h (breakpoint_silence): Export. | |
| * infcmd.c (finish_command): Check for reverse exec direction. | |
| (finish_backward): New function, handle finish cmd in reverse. | |
| * infrun.c (enum inferior_stop_reason): Add NO_HISTORY reason. | |
| (handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY. | |
| Handle stepping over a function call in reverse. | |
| Handle stepping thru a line range in reverse. | |
| Handle setting a step-resume breakpoint in reverse. | |
| Handle stepping into a function in reverse. | |
| Handle stepping between line ranges in reverse. | |
| (print_stop_reason): Print reason for NO_HISTORY. | |
| 2006-03-31 Michael Snyder <msnyder@redhat.com> | |
| * infrun.c: Make sure to check for EXEC_REVERSE not EXEC_FORWARD, | |
| since targets that don't implement execdir will return EXEC_ERROR. | |
| 2006-03-31 Michael Snyder <msnyder@redhat.com> | |
| User interface for reverse execution. | |
| * Makefile.in (reverse.c): New file. | |
| * reverse.c: New file. User interface for reverse execution. | |
| 2006-03-31 Andrew Stubbs <andrew.stubbs@st.com> | |
| * value.h (struct internalvar): Add field 'endian'. | |
| * value.c (lookup_internalvar): Initialise endian. | |
| (value_of_internalvar): Flip the endian of built-in types if required. | |
| (set_internalvar): Set the endian. | |
| (show_convenience): Access the value through value_of_internalvar(). | |
| 2006-03-30 Vladimir Prus <ghost@cs.msu.su> | |
| * remote.c (watchpoint_to_Z_packet): Use values of Z_packet_type enum | |
| instead of hardcoded integer literals. | |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> | |
| * cli/cli-script.c (insert_args): Handle NULL user_args. | |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> | |
| * arm-tdep.c (thumb_scan_prologue): Don't try to analyze | |
| the function at zero if we have no symbols. | |
| 2006-03-30 Adrien Kunysz <a_kunysz@yahoo.com> | |
| * i386-stub.c (getpacket): Fix array overflow. | |
| * m32r-stub.c (getpacket): Likewise. | |
| * m68k-stub.c (getpacket): Likewise. | |
| * sh-stub.c (getpacket): Likewise. | |
| * sparc-stub.c (getpacket): Likewise. | |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> | |
| * frame.h (set_current_sal_from_frame): New prototype. | |
| * stack.c (set_current_sal_from_frame): Make global. | |
| * infrun.c (normal_stop): Call set_current_sal_from_frame. | |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-thread-db.c: Include "linux-nat.h". | |
| (check_for_thread_db): New function, split out from | |
| thread_db_new_objfile. Remove dead check for active | |
| thread_db on inapplicable targets. | |
| (thread_db_new_objfile): Call check_for_thread_db. | |
| * Makefile.in (linux-thread-db.o): Update. | |
| * linux-nat.c (child_post_attach): Call check_for_thread_db. | |
| (linux_child_post_startup_inferior): Likewise. | |
| (lin_lwp_attach_lwp): Call target_post_attach instead of | |
| child_post_attach. | |
| * linux-nat.h (check_for_thread_db): New prototype. | |
| 2006-03-30 Daniel Jacobowitz <dan@codesourcery.com> | |
| * remote.c (struct remote_state): Add BUF and BUF_SIZE. | |
| (init_remote_state): Initialize the new fields. | |
| (get_memory_packet_size): Update BUF and BUF_SIZE if necessary. | |
| (set_thread, remote_thread_alive, remote_unpack_thread_info_response) | |
| (remote_get_threadinfo, parse_threadlist_response) | |
| (remote_get_threadlist, remote_current_thread, remote_threads_info) | |
| (remote_threads_extra_info, extended_remote_restart, get_offsets) | |
| (remote_check_symbols, remote_open_1, remote_detach) | |
| (remove_vcont_probe, remote_vcont_resume, remote_resume) | |
| (remote_wait, remote_async_wait, fetch_register_using_p) | |
| (remote_fetch_registers, store_register_using_P) | |
| (remote_store_registers, check_binary_download, remote_write_bytes) | |
| (remote_read_bytes, remote_insert_breakpoint) | |
| (remote_remove_breakpoint, remote_insert_watchpoint) | |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) | |
| (remote_remove_hw_breakpoint, compare_sections_command) | |
| (remote_xfer_partial, remote_rcmd, packet_command) | |
| (remote_get_thread_local_address): Use the global incoming buffer | |
| instead of alloca or xmalloc. Limit outgoing packets to | |
| rs->remote_packet_size and incoming packets to rs->buf_size. | |
| Update calls to getpkt and remote_send. | |
| (remote_send): Take arguments by reference. | |
| (putpkt_binary): Eliminate junkbuf. Use skip_frame. | |
| (skip_frame): New function. | |
| (read_frame): Take arguments by reference. Expand the packet | |
| buffer instead of issuing an error. | |
| (getpkt, getpkt_sane): Take arguments by reference. | |
| * remote.h (getpkt): Update prototype and doc. | |
| * tracepoint.c (remote_get_noisy_reply): Take arguments by | |
| reference. | |
| (target_buf): Change from array to pointer. | |
| (target_buf_size): New variable. | |
| (remote_set_transparent_ranges): Update call to getpkt. | |
| (trace_start_command, trace_stop_command, trace_status_command): | |
| Update calls to remote_get_noisy_reply. | |
| (finish_tfind_command): Take arguments by reference. | |
| (trace_find_command, trace_find_pc_command) | |
| (trace_find_tracepoint_command, trace_find_line_command): | |
| (trace_find_range_command, trace_find_outside_command): Update | |
| calls to finish_tfind_command. | |
| (_initialize_tracepoint): Initialize target_buf_size and target_buf. | |
| 2005-03-30 Randolph Chung <tausq@debian.org> | |
| * hppa-linux-tdep.c: Include regset.h. | |
| (GR_REGNUM, TR_REGNUM, greg_map): New. | |
| (hppa_linux_supply_regset, hppa_linux_supply_fpregset): New. | |
| (hppa_linux_regset, hppa_linux_fpregset): New. | |
| (hppa_linux_regset_from_core_section): New. | |
| (hppa_linux_init_abi): Set regset_from_core_section. | |
| (_initialize_hppa_linux_tdep): Register osabi handler for | |
| 64-bit Linux. | |
| * Makefile.in (hppa-linux-tdep.o): Update dependencies. | |
| * config/pa/linux.mh: Stop using core-regset.o | |
| 2006-03-30 Randolph Chung <tausq@debian.org> | |
| * hppa-tdep.c (hppa_find_unwind_entry_in_block): New. | |
| (hppa_frame_cache): Use new function to find unwind entry. | |
| (hppa_frame_this_id): Likewise. | |
| (hppa_frame_unwind_sniffer): Likewise. | |
| 2006-03-29 Daniel Jacobowitz <dan@codesourcery.com> | |
| * NEWS: Mention the removal of NLM. | |
| 2006-03-29 Steve Ellcey <sje@cup.hp.com> | |
| * Makefile.in (nlm): Remove target. | |
| * configure.tgt (i[34567]86-*-netware*): Do not set build_nlm. | |
| * configure.ac: Remove AC_CONFIG_SUBDIRS of nlm. | |
| * configure: Regenerate. | |
| * doc/gdb.texinfo: Remove gdbserve.nlm documentation. | |
| * nlm: Remove directory. | |
| 2006-03-29 Daniel Jacobowitz <dan@codesourcery.com> | |
| * Makefile.in (utils.o): Update. | |
| * top.c (in_user_command): New. | |
| (command_line_input): Use input_from_terminal_p. | |
| (input_from_terminal_p): Don't check caution. Handle | |
| stdin == NULL for Insight. | |
| * top.h (in_user_command, caution): New declarations. | |
| * utils.c: Include "top.h". | |
| (query, defaulted_query): Check caution here. Move the call | |
| to input_from_terminal_p higher. | |
| * cli/cli-script.c (do_restore_user_call_depth): Only decrement | |
| the depth. Update in_user_command if necessary. | |
| (execute_user_command): Don't clobber old_chain. Set | |
| in_user_command. Let do_restore_user_call_depth handle | |
| user_call_depth. | |
| (read_command_lines): Check whether to prompt before calling | |
| Insight hooks. | |
| * tui/tui-hooks.c (tui_query_hook): Remove newly unnecessary | |
| input_from_terminal_p check. | |
| 2006-03-29 Ulrich Weigand <uweigand@de.ibm.com> | |
| * s390-nat.c (s390_insert_watchpoint): Add missing argument. | |
| (s390_remove_watchpoint): Likewise. | |
| 2006-03-28 Jim Blandy <jimb@codesourcery.com> | |
| * prologue-value.c, prologue-value.h: New files. | |
| * Makefile.in (prologue_value_h): New variable. | |
| (HFILES_NO_SRCDIR): List prologue-value.h. | |
| (SFILES): List prologue-value.c. | |
| (COMMON_OBS): List prologue-value.o. | |
| (prologue-value.o): New rule. | |
| 2006-03-27 Michael Snyder <msnyder@redhat.com> | |
| * xstormy16-tdep.c (xstormy16_return_value, xstormy16_push_dummy_call, | |
| xstormy16_pointer_to_address, xstormy16_address_to_pointer, | |
| xstormy16_frame_prev_register): Change void* to gdb_byte*. | |
| (xstormy16_push_dummy_call): Add block-local char* val, | |
| to avoid type conflict with outer scope variable. | |
| 2006-03-27 Andrew Stubbs <andrew.stubbs@st.com> | |
| * sh-tdep.c (sh_gdbarch_init): Add missing architectures. | |
| 2006-03-27 Nick Roberts <nickrob@snap.net.nz> | |
| * varobj.c (c_name_of_child, c_value_of_child): Allow non-zero | |
| offsets for languages like Fortran. | |
| 2006-03-26 Randolph Chung <tausq@debian.org> | |
| * config/pa/hppa64.mt: Use HPUX version of the tm file. | |
| 2006-03-25 Nick Roberts <nickrob@snap.net.nz> | |
| * mi/gdb-mi.el (gdbmi-send): Improve regexp to repeat commands. | |
| Try to deal with continuation line. | |
| (gdbmi, gdbmi-prompt1, gud-gdbmi-marker-filter): Update to new | |
| variable names. | |
| (gdb-break-list-regexp, gdb-stack-list-frames-regexp): | |
| Future proof against new fields being added to MI output. | |
| (gdbmi-prompt2, gdb-break-list-handler,gdb-get-source-file) | |
| (gdbmi-frame-handler): Update to new variable name | |
| gdb-get-buffer-create. | |
| (gdbmi-frame-handler): Use hollow-right-triangle for all selected | |
| frames which except the innermost (where execution has stopped). | |
| 2006-03-24 Randolph Chung <tausq@debian.org> | |
| * solib-som.c (link_map_start): Don't error out if there is | |
| not yet a link map. | |
| 2006-03-24 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-nat.c (linux_ops_saved): New. | |
| (super_mourn_inferior, kill_inferior, threaded, linux_nat_ops) | |
| (child_mourn_inferior, child_wait, linux_nat_create_inferior) | |
| (linux_nat_fetch_registers, linux_nat_store_registers) | |
| (linux_nat_child_post_startup_inferior, init_linux_nat_ops): Delete. | |
| (init_lwp_list): Don't set threaded. | |
| (add_lwp): Don't modify threaded. | |
| (delete_lwp): Don't mention non-threaded mode. | |
| (linux_nat_switch_fork): New. | |
| (linux_nat_attach): Update inferior_ptid. | |
| (linux_nat_wait): Handle num_lwps == 0 at entry. Don't check | |
| threaded flag. | |
| (linux_nat_kill): Handle pending forks and saved forks. | |
| (linux_nat_mourn_inferior): Handle saved forks. | |
| (linux_nat_pid_to_str): Don't use the LWP form when there is | |
| only one thread. | |
| (linux_target): Don't set to_wait, to_kill, or to_mourn_inferior. | |
| (linux_nat_add_target): New. | |
| (_initialize_linux_nat): Don't initialize the linux native target | |
| here. | |
| * linux-nat.h (linux_nat_add_target, linux_nat_switch_fork): New | |
| prototypes. | |
| * linux-fork.c: Include "linux-nat.h". | |
| (add_fork): Update initial PID. | |
| (fork_load_infrun_state): Call linux_nat_switch_fork. | |
| * Makefile.in (linux-fork.o): Update. | |
| * alpha-linux-nat.c (_initialize_alpha_linux_nat): Use | |
| linux_nat_add_target instead of add_target. | |
| * amd64-linux-nat.c (_initialize_amd64_linux_nat): Likewise. | |
| * arm-linux-nat.c (_initialize_arm_linux_nat): Likewise. | |
| * hppa-linux-nat.c (_initialize_hppa_linux_nat): Likewise. | |
| * ia64-linux-nat.c (_initialize_ia64_linux_nat): Likewise. | |
| * i386-linux-nat.c (_initialize_i386_linux_nat): Likewise. | |
| * m32r-linux-nat.c (_initialize_m32r_linux_nat): Likewise. | |
| * m68klinux-nat.c (_initialize_m68k_linux_nat): Likewise. | |
| * mips-linux-nat.c (_initialize_mips_linux_nat): Likewise. | |
| * ppc-linux-nat.c (_initialize_ppc_linux_nat): Likewise. | |
| * s390-nat.c (_initialize_s390_nat): Likewise. | |
| * sparc-linux-nat.c (_initialize_sparc_linux_nat): Likewise. | |
| * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Likewise. | |
| 2006-03-24 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-fork.c: Include "gdb_assert.h". | |
| (fork_load_infrun_state): Set inferior_ptid and stop_pc here. | |
| Update the register cache and selected frame also. | |
| (linux_fork_mourn_inferior): Use fork_load_infrun_state. Return | |
| to single fork mode if necessary. | |
| (linux_fork_context): Remove bits handled by fork_load_infrun_state. | |
| * Makefile.in (linux_fork_h): New. | |
| (linux-fork.o, linux-nat.o): Update. | |
| 2006-03-23 Andreas Schwab <schwab@suse.de> | |
| * config/s390/s390.mh (NATDEPFILES): Add linux-fork.o. | |
| 2006-03-18 Jim Blandy <jimb@codesourcery.com> | |
| * symtab.h (enum address_class): Doc fix. | |
| 2006-03-16 Michael Snyder <msnyder@redhat.com> | |
| * tracepoint.c (tracepoint_save_command): Fix typo in error msg. | |
| * target.c (push_target): Fix typo in comment. | |
| * remote.c (remote_watch_data_address): Fix typo in comment. | |
| * i386-tdep.c (i386_push_dummy_call): Fix typo in comment. | |
| 2006-03-15 Kevin Buettner <kevinb@redhat.com> | |
| * frv-linux-tdep.c (gdbcore.h, regcache.h, regset.h, gdb_string.h): | |
| Include. | |
| (FRV_ELF_NGREG, FRV_PT_PSR, FRV_PT_ISR, FRV_PT_CCR, FRV_PT_CCCR) | |
| (FRV_PT_LR, FRV_PT_LCR, FRV_PT_PC, FRV_PT_GNER0, FRV_PT_GNER1) | |
| (FRV_PT_IACC0H, FRV_PT_IACC0L, FRV_PT_GR, FRV_PT_TBR) | |
| (FRV_PT_EXEC_FDPIC_LOADMAP, FRV_PT_INTERP_FDPIC_LOADMAP): Define. | |
| (frv_elf_greg_t, frv_elf_gregset_t, frv_elf_fpreg_t) | |
| (frv_elf_fpregset_t): Define types. | |
| (frv_linux_supply_gregset, frv_linux_supply_fpregset) | |
| (frv_linux_regset_from_core_section: New functions. | |
| (frv_linux_gregset, frv_linux_fpregset): New static globals. | |
| (frv_linux_init_abi): Register the `regset_from_core_section' method. | |
| * Makefile.in (frv-linux-tdep.o): Update dependencies. | |
| * solib-frv.c (frv_current_sos): Relocate main executable after | |
| loading core file. | |
| (frv_clear_solib): Clean up space associated with | |
| `main_executable_lm_info'. | |
| * config/frv/frv.mt (TDEPFILES): Add corelow.o to this list. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * Makefile.in (mips_linux_tdep_h): New. | |
| (mpis-linux-nat.o, mips-linux-tdep.o): Update. | |
| * mips-linux-nat.c: Include "inferior.h", "mips-linux-tdep.h", and | |
| <sys/ptrace.h>. | |
| (have_ptrace_regsets, super_fetch_registers, super_store_registers) | |
| (mips64_linux_regsets_fetch_registers) | |
| (mips64_linux_regsets_store_registers, mips64_linux_fetch_registers) | |
| (mips64_linux_store_registers): New. | |
| (_initialize_mips_linux_nat): Override to_fetch_registers and | |
| to_store_registers. | |
| * mips-linux-tdep.h: New file. | |
| * mips-linux-tdep.c: Include "mips-linux-tdep.c". | |
| (ELF_NGREG, ELF_NFPREG, elf_greg_t, elf_gregset_t, elf_fpreg_t) | |
| (elf_fpregset_t, FPR_BASE, PC, CAUSE, BADVADDR, MMHI, MMLO) | |
| (FPC_CSR, FPC_EIR, EF_REG0, EF_REG31, EF_LO, EF_HI, EF_CP0_EPC) | |
| (EF_CP0_BADVADDR, EF_CP0_STATUS, EF_CP0_CAUSE, EF_SIZE) | |
| (MIPS64_ELF_NGREG, MIPS64_ELF_NFPREG, mips64_elf_greg_t) | |
| (mips64_elf_gregset_t, mips64_elf_fpreg_t, mips64_elf_fpregset_t) | |
| (MIPS64_FPR_BASE, MIPS64_PC, MIPS64_CAUSE, MIPS64_BADVADDR) | |
| (MIPS64_MMHI, MIPS64_MMLO, MIPS64_FPC_CSR, MIPS64_FPC_EIR) | |
| (MIPS64_EF_REG0, MIPS64_EF_REG31, MIPS64_EF_LO, MIPS64_EF_HI) | |
| (MIPS64_EF_CP0_EPC, MIPS64_EF_CP0_BADVADDR, MIPS64_EF_CP0_STATUS) | |
| (MIPS64_EF_CP0_CAUSE, MIPS64_EF_SIZE): Delete. | |
| (supply_32bit_reg): Use gdb_byte. | |
| (supply_64bit_reg): New. | |
| (mips_supply_gregset, mips_fill_gregset, mips_supply_fpregset) | |
| (mips_fill_fpregset, fetch_core_registers, supply_gregset) | |
| (fill_gregset, supply_fpregset): Update for renamed types. | |
| (mips64_supply_gregset): Use gdb_byte and supply_64bit_reg. | |
| (mips64_fill_gregset): Make global. Handle 32-bit register | |
| sizes. | |
| (mips64_fill_fpregset): Make global. Use gdb_byte. Handle | |
| FP regsets properly. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * mips-linux-tdep.c (mips_supply_gregset): Renamed from supply_gregset. | |
| (mips_fill_gregset): Renamed from fill_gregset. | |
| (mips_supply_fpregset): Renamed from supply_fpregset. | |
| (mips_fill_fpregset): Renamed from fill_fpregset. | |
| (fetch_core_registers): Update calls. | |
| (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): New | |
| functions. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * mips-tdep.c (mips_gdbarch_init): Default 64-bit ELF files to N64. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * mips-tdep.c (is_mips16_addr, mips32_next_pc, add_offset_16): | |
| Correct arithmetic for 64-bit CORE_ADDR. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * mips-linux-tdep.c: Include "floatformat.h". | |
| (mips_linux_init_abi): Use 128-bit long double for N32 and N64. | |
| * mips-tdep.c (mips_n32n64_return_value): Support 128-bit long | |
| double. | |
| (print_gp_register_row): Don't print spaces before ignored | |
| or floating point registers. | |
| * Makefile.in (mips-linux-tdep.o): Update. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * mips-mdebug-tdep.c (compare_pdr_entries): Use bfd_get_signed_32 | |
| for code addresses. | |
| (non_heuristic_proc_desc): Likewise. | |
| 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * mips-linux-nat.c: Include "gdb_proc_service.h". | |
| (PTRACE_GET_THREAD_AREA): Define. | |
| (ps_get_thread_area): New. | |
| * Makefile.in (mips-linux-nat.o): Update. | |
| 2006-03-13 Jim Blandy <jimb@codesourcery.com> | |
| * MAINTAINERS: Use my work address. | |
| 2006-03-09 Michael Snyder <msnyder@redhat.com> | |
| * linux-nat.c (kill_inferior): Just call target_mourn_inferior | |
| instead of getting tricky for the multi-fork case. | |
| * linux-fork.c (linux_fork_killall): Call PT_KILL and waitpid | |
| for each fork, and then use init_fork_list to delete them. | |
| 2006-03-08 Alexandre Oliva <aoliva@redhat.com> | |
| * solib-svr4.c (svr4_current_sos): Move up initialization of | |
| l_addr, such that it clearly covers all cases. | |
| 2006-03-08 Andreas Schwab <schwab@suse.de> | |
| * ia64-tdep.c (ia64_libunwind_frame_this_id): Adapt use of | |
| libunwind_frame_prev_register to use a gdb_byte buffer and | |
| extract_unsigned_integer. | |
| (ia64_libunwind_sigtramp_frame_prev_register): Likewise. | |
| * libunwind-frame.c (libunwind_frame_prev_register): Change type | |
| of last argument to `gdb_byte *' | |
| * libunwind-frame.h: Adjust declaration. | |
| 2006-03-08 Paul Brook <paul@codesourcery.com> | |
| * arm-tdep.c (arm_push_dummy_call): Remove stack alignment. | |
| (arm_frame_align): New function. | |
| (arm_gdbarch_init): Use it. | |
| 2006-03-03 Khem Raj <khem@mvista.com> | |
| * remote-rdp.c (remote_rdp_xfer_inferior_memory): Use gdb_byte. | |
| Committed by Andrew Cagney. | |
| 2006-03-02 Corinna Vinschen <vinschen@redhat.com> | |
| * mn10300-tdep.c (mn10300_push_dummy_call): Write breakpoint | |
| address to MDR register. | |
| 2006-03-01 Daniel Jacobowitz <dan@codesourcery.com> | |
| * gdbtypes.c (lookup_struct_elt_type): Correct noerr for recursive | |
| calls. | |
| 2006-03-01 Randolph Chung <tausq@debian.org> | |
| * somread.c (som_symfile_read): Update comment and remove unneeded | |
| use of a deprecated variable. | |
| 2006-03-01 Randolph Chung <tausq@debian.org> | |
| * hppa-tdep.h (unwind_table_entry): Update field names to match HP | |
| runtime specification. | |
| * hppa-tdep.c (internalize_unwinds, hppa_frame_cache): Likewise. | |
| (unwind_command): Likewise. | |
| 2006-03-01 Randolph Chung <tausq@debian.org> | |
| * hppa-tdep.c (hppa_frame_cache): Handle Region_Description and | |
| Pseudo_SP_Set in unwind record. | |
| 2006-03-01 Randolph Chung <tausq@debian.org> | |
| * hppa-hpux-tdep.c (initialize_hp_cxx_exception_support): Use | |
| TDEP->is_elf to determine if we are working with a SOM binary. | |
| (null_symtab_and_line): Remove unused variable. | |
| * config/pa/hppa64.mt: Use tm-hppa.h. | |
| * config/pa/tm-hppa64.h: Remove file. | |
| 2006-03-01 Wu Zhou <woodzltc@cn.ibm.com> | |
| * f-typeprint.c (f_type_print_base): Delete the redundant space. | |
| 2006-02-28 Kevin Buettner <kevinb@redhat.com> | |
| * Makefile.in (mn10300-linux-tdep.o): Update dependencies. | |
| * mn10300-linux-tdep.c (frame.h, trad-frame.h, tramp-frame.h): | |
| Include. | |
| (am33_linux_sigframe_cache_init): New function. | |
| (am33_linux_sigframe, am33_linux_rt_sigframe): New signal frame | |
| descriptions. | |
| (AM33_SIGCONTEXT_D0, AM33_SIGCONTEXT_D1, AM33_SIGCONTEXT_D2) | |
| (AM33_SIGCONTEXT_D3, AM33_SIGCONTEXT_A0, AM33_SIGCONTEXT_A1) | |
| (AM33_SIGCONTEXT_A2, AM33_SIGCONTEXT_A3, AM33_SIGCONTEXT_E0) | |
| (AM33_SIGCONTEXT_E1, AM33_SIGCONTEXT_E2, AM33_SIGCONTEXT_E3) | |
| (AM33_SIGCONTEXT_E4, AM33_SIGCONTEXT_E5, AM33_SIGCONTEXT_E6) | |
| (AM33_SIGCONTEXT_E7, AM33_SIGCONTEXT_LAR, AM33_SIGCONTEXT_LIR) | |
| (AM33_SIGCONTEXT_MDR, AM33_SIGCONTEXT_MCVF, AM33_SIGCONTEXT_MCRL) | |
| (AM33_SIGCONTEXT_MCRH, AM33_SIGCONTEXT_MDRQ, AM33_SIGCONTEXT_SP) | |
| (AM33_SIGCONTEXT_EPSW, AM33_SIGCONTEXT_PC, AM33_SIGCONTEXT_FPUCONTEXT): | |
| New constants. | |
| (am33_linux_init_osabi): Register signal frame unwinders. | |
| 2006-02-28 Kevin Buettner <kevinb@redhat.com> | |
| * mn10300-tdep.c (mn10300_analyze_prologue): Implement backtrack | |
| out of pattern match by saving relevant state. Fix stack size | |
| adjustment bug. | |
| 2006-02-28 Alexandre Oliva <aoliva@redhat.com> | |
| * solib-svr4.h (struct link_map_offsets): Add l_ld_offset and | |
| l_ld_size fields. | |
| * solib-svr4.c (struct lm_info): Add l_addr field. | |
| (LM_ADDR_FROM_LINK_MAP): Renamed from LM_ADDR. | |
| (HAS_LM_DYNAMIC_FROM_LINK_MAP): New. | |
| (LM_DYNAMIC_FROM_LINK_MAP): New. | |
| (LM_ADDR_CHECK): New. Use it instead of LM_ADDR. | |
| (svr4_current_sos): Initialize l_addr. Adjust. | |
| (svr4_relocate_section_addresses): Adjust. | |
| (svr4_ilp32_fetch_link_map_offsets): Define new members. | |
| (svr4_lp64_fetch_link_map_offsets): Likewise. | |
| * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Likewise. | |
| * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Likewise. | |
| (mipsnbsd_lp64_fetch_link_map_offsets): Likewise. | |
| * Makefile.in (solib-svr4.o): Depend on $(elf_bfd_h). | |
| 2006-02-26 David S. Miller <davem@sunset.davemloft.net> | |
| * config/sparc/linux.mt (TDEPFILES): Add sol2-tdep.o. | |
| * config/sparc/linux64.mt (TDEPFILES): Likewise. | |
| 2006-02-27 Alan Modra <amodra@bigpond.net.au> | |
| * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Correct return type. | |
| (ppc_linux_remove_watchpoint): Likewise, and args. | |
| 2006-02-26 Mark Kettenis <kettenis@gnu.org> | |
| * i386obsd-tdep.c (i386obsd_trapframe_sniffer): Also recognize | |
| "soft" interrupts. | |
| 2006-02-24 Charles Wilson <cygwin@cwilson.fastmail.fm> | |
| * gdb/defs.h: unconditionally include <fcntl.h>, and | |
| ensure that O_BINARY is defined. | |
| * gdb/solib.c(solib_open): ensure solib files are opened in | |
| binary mode. | |
| * gdb/corelow.c: Remove O_BINARY macro definition. | |
| * gdb/exec.c: Remove O_BINARY macro definition | |
| * gdb/remote-rdp.c: Remove O_BINARY macro definition | |
| * gdb/source.c: Remove O_BINARY macro definition | |
| * gdb/symfile.c: Remove O_BINARY macro definition | |
| 2006-02-24 Randolph Chung <tausq@debian.org> | |
| * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Initialize | |
| argreg. | |
| * solib-som.c (som_solib_remove_inferior_hook): Remove unused | |
| function. | |
| 2006-02-24 Wu Zhou <woodzltc@cn.ibm.com> | |
| * f-exp.y: Symbol '%' is not used as the modulus operator in | |
| Fortran. Delete this from Fortran expression. | |
| It is now used by Fortran 90 and later to access the member | |
| of derived type. Add this into Fortran expression. | |
| * f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT. | |
| Print each elements in the derived type. | |
| * f-typeprint.c (print_equivalent_f77_float_type): Add a parameter | |
| level into the function definition to do indented printing. And | |
| call fprintfi_filtered instead to do indented printing. | |
| (f_type_print_base): Replace fprintf_filtered with the indented | |
| version (fprintfi_filtered). | |
| (f_type_print_base): Call indented print_equivalent_f77_float_type. | |
| (f_type_print_base): Add code to handle TYPE_CODE_STRUCT. Print | |
| the definition of the derived type. | |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> | |
| * gdb_curses.h: Provide a fallback prototype for tgetnum. | |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> | |
| * doublest.h: Conditionalize DOUBLEST on PRINTF_HAS_LONG_DOUBLE | |
| also. | |
| (DOUBLEST_FORMAT): Rename to DOUBLEST_PRINT_FORMAT. | |
| (DOUBLEST_SCAN_FORMAT): New. | |
| * ada-lex.l (PRINTF_HAS_LONG_DOUBLE): Remove redefinitions. | |
| (processReal): Use DOUBLEST_SCAN_FORMAT. | |
| * c-exp.y (parse_number): Likewise. | |
| * jv-exp.y (parse_number): Likewise. | |
| * objc-exp.y (parse_number): Likewise. | |
| * p-exp.y (parse_number): Likewise. | |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> | |
| * event-top.c (async_do_nothing, async_disconnect) | |
| (async_stop_sig, async_float_handler): Remove duplicated | |
| prototypes. | |
| (handle_sighup): Guard prototype with SIGHUP. | |
| (async_do_nothing): Guard function and prototype with | |
| SIGQUIT || SIGHUP. | |
| (async_disconnect): Guard prototype with SIGHUP. | |
| (async_stop_sig): Guard prototype with STOP_SIGNAL. | |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> | |
| * maint.c (maintenance_dump_me): Remove unnecessary prototype. | |
| 2006-02-23 Daniel Jacobowitz <dan@codesourcery.com> | |
| * win32-termcap.c (tputs): Return 0. | |
| 2006-02-21 Mark Kettenis <kettenis@gnu.org> | |
| * configure.ac: Introduce ---enable-werror, which adds -Werror to | |
| the compiler command line. Enabled by default. Disable with | |
| --disable-werror. | |
| * configure regenerate. | |
| 2006-02-21 Daniel Jacobowitz <dan@codesourcery.com> | |
| * elfread.c (elf_symtab_read): Skip symbols which BFD considers | |
| special. | |
| 2006-02-21 Andrew Stubbs <andrew.stubbs@st.com> | |
| * defs.h (directory_switch): Add prototype. | |
| * main.c (captured_main): Use directory_switch() instead of | |
| directory_command() to add directories from the -d switch. | |
| * source.c (directory_switch): New function. | |
| (add_path): Use buildargv() to parse spaces in filenames properly. | |
| Strip multiple trailing '/' rather than just one. | |
| 2006-02-21 Andrew Stubbs <andrew.stubbs@st.com> | |
| * symfile.c (add_symbol_file_command): Use buildargv(), instead of | |
| hand decoding the command line, to allow use of quotes and spaces. | |
| (_initialize_symfile): Reorganize the help message for add-symbol-file | |
| such that 'help files' shows a better message. | |
| 2006-02-21 Andrew Stubbs <andrew.stubbs@st.com> | |
| * sh-tdep.c (sh_generic_show_regs): Reformat both code and output. | |
| (sh3_show_regs, sh2e_show_regs, sh2a_show_regs): Likewise. | |
| (sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs): Likewise. | |
| (sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Likewise. | |
| 2006-02-20 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-nat.c (lin_thread_get_thread_signals): Default to __SIGRTMIN | |
| and __SIGRTMIN + 1. | |
| 2006-02-20 Daniel Jacobowitz <dan@codesourcery.com> | |
| * remote.c: Add an enumeration for configurable remote | |
| packets. | |
| (remote_protocol_packets, set_remote_protocol_packet_cmd) | |
| (show_remote_protocol_packet_cmd): New. | |
| (remote_protocol_vcont) | |
| (set_remote_protocol_vcont_packet_cmd) | |
| (show_remote_protocol_vcont_packet_cmd) | |
| (remote_protocol_qSymbol) | |
| (set_remote_protocol_qSymbol_packet_cmd) | |
| (show_remote_protocol_qSymbol_packet_cmd) | |
| (remote_protocol_P, set_remote_protocol_P_packet_cmd) | |
| (show_remote_protocol_P_packet_cmd) | |
| (remote_protocol_Z) | |
| (set_remote_protocol_Z_software_bp_packet_cmd) | |
| (show_remote_protocol_Z_software_bp_packet_cmd) | |
| (set_remote_protocol_Z_hardware_bp_packet_cmd) | |
| (show_remote_protocol_Z_hardware_bp_packet_cmd) | |
| (set_remote_protocol_Z_write_wp_packet_cmd) | |
| (show_remote_protocol_Z_write_wp_packet_cmd) | |
| (set_remote_protocol_Z_read_wp_packet_cmd) | |
| (show_remote_protocol_Z_read_wp_packet_cmd) | |
| (set_remote_protocol_Z_access_wp_packet_cmd) | |
| (show_remote_protocol_Z_access_wp_packet_cmd) | |
| (remote_protocol_binary_download) | |
| (set_remote_protocol_binary_download_cmd) | |
| (show_remote_protocol_binary_download_cmd) | |
| (remote_protocol_qPart_auxv) | |
| (set_remote_protocol_qPart_auxv_packet_cmd) | |
| (show_remote_protocol_qPart_auxv_packet_cmd) | |
| (remote_protocol_qGetTLSAddr) | |
| (set_remote_protocol_qGetTLSAddr_packet_cmd) | |
| (show_remote_protocol_qGetTLSAddr_packet_cmd) | |
| (remote_protocol_p) | |
| (set_remote_protocol_p_packet_cmd) | |
| (show_remote_protocol_p_packet_cmd): Delete. | |
| (init_all_packet_configs): Simplify. | |
| (set_remote_protocol_Z_packet_cmd) | |
| (show_remote_protocol_Z_packet_cmd) | |
| (remote_check_symbols, remote_vcont_probe, remote_vcont_resume) | |
| (remote_fetch_registers, remote_prepare_to_store) | |
| (remote_store_registers, check_binary_download) | |
| (remote_write_bytes, remote_insert_breakpoint) | |
| (remote_remove_breakpoint, remote_insert_watchpoint) | |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) | |
| (remote_remove_hw_breakpoint, remote_xfer_partial) | |
| (remote_get_thread_local_address): Update for packet array. | |
| (_initialize_remote): Likewise; also update for common | |
| set/show commands. | |
| 2006-02-20 Daniel Jacobowitz <dan@codesourcery.com> | |
| * symfile.c (place_section): Correct retry logic. | |
| 2006-02-19 Christopher Faylor <cgf@timesys.com> | |
| * win32_nat.c (cygwin_load_start): New variable. | |
| (cygwin_load_end): Ditto. | |
| (have_saved_context): Ditto. | |
| (saved_context): Ditto. | |
| (max_dll_name_len): Delete obsolete variable. | |
| (do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll | |
| if we are in a cygwin signal rather than a windows signal. | |
| (solib_symbols_add): Detect and store beginning and end of cygwin DLL | |
| if dll being loaded is the cygwin DLL. | |
| (register_loaded_dll): Remove calculation of max_dll_name_len. | |
| (win32_clear_solib): Ditto. | |
| (handle_load_dll): Delete obsolete variable. Remove unneeded call to | |
| solib_add. | |
| (handle_output_debug_string): Detect and store signal information sent | |
| by Cygwin here. | |
| (handle_exception): Silently pass on errors in the cygwin DLL. Return | |
| -1 on first pass exception. | |
| (win32_continue): Remove spurious clearing of continue_status. | |
| (get_win32_debug_event): Deal differently first chance exception. | |
| 2006-02-19 Randolph Chung <tausq@debian.org> | |
| * hppa-tdep.c (hppa_in_solib_call_trampoline): Only use if no | |
| unwind entry. | |
| 2006-02-16 Fred Fish <fnf@specifix.com> | |
| * eval.c (evaluate_subexp_standard): For OP_TYPE, return | |
| a non lval value zero, of the appropriate type, when avoiding | |
| side effects. | |
| * typeprint.c (ptype_eval): Remove function and declaration. | |
| (ptype_command): Simplify to just a call to whatis_exp. | |
| 2006-02-15 Paul Brook <paul@codesourcery.com> | |
| * arm-tdep.c (arm_skip_prologue, thumb_get_next_pc, arm_get_next_pc): | |
| Load insn opcodes as unsigned values. | |
| 2006-02-14 Alexandre Oliva <aoliva@redhat.com> | |
| * doublest.h (DOUBLEST): Use long double only if we can scan | |
| it in. Undefine HAVE_LONG_DOUBLE otherwise. | |
| (DOUBLEST_FORMAT): New. | |
| * c-exp.y (parse_number): Use it. | |
| * jv-exp.y (parse_number): Likewise. | |
| * objc-exp.y (parse_number): Likewise. | |
| * p-exp.y (parse_number): Likewise. | |
| * varobj.c (free_variable): Silence type-punning warnings. | |
| * tui/tui-data.h (struct tui_list): Change type of list member. | |
| * tui/tui-data.c: Remove no-longer-needed type casts. | |
| (source_windows): Silence type-punning warnings. | |
| * tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise. | |
| 2006-02-13 Mark Kettenis <kettenis@gnu.org> | |
| Fix PR breakpoints/2080. | |
| * i386-tdep.c (struct i386_frame_cache): Add stack_align member. | |
| (i386_analyze_stack_align): New function. | |
| (i386_analyze_prologue): Use i386_analyze_stack_align. | |
| (i386_frame_cache): Deal with stack realignment. | |
| 2006-02-14 Nick Roberts <nickrob@snap.net.nz> | |
| * mi/gdb-mi.el: Use more functions from gdb-ui.el. | |
| (gdb-break-list-regexp): Match "what" field if present. | |
| (gdb-stack-list-frames-regexp): Match "from" field if present. | |
| (gdb-stack-list-frames-handler): Present output like "info | |
| breakpoints" so regexps can be shared with gdb-ui | |
| 2006-02-10 Daniel Jacobowitz <dan@codesourcery.com> | |
| * NEWS: Mention native Windows support. | |
| * Makefile.in (gdb_select_h, ser_tcp_h): New. | |
| (ALLDEPFILES): Add ser-mingw.c. | |
| (event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o) | |
| (ser-tcp.o, ser-unix.o): Update. | |
| (ser-mingw.o): New rule. | |
| * configure: Regenerated. | |
| * configure.ac: Add ser-mingw.o for mingw32. | |
| * ser-mingw.c: New file. | |
| * event-loop.c: Include "gdb_select.h". | |
| (gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c. | |
| * ser-base.c: Include "gdb_select.h". | |
| (ser_base_wait_for): Use gdb_select. | |
| * serial.c (serial_for_fd): New function. | |
| (serial_fdopen): Try "terminal" before "hardwire". Initialize | |
| the allocated struct serial. | |
| (serial_wait_handle): New function. | |
| * serial.h (serial_for_fd, serial_wait_handle): New prototypes. | |
| (struct serial_ops) [USE_WIN32API]: Add wait_handle. | |
| * gdb_select.h: New file. | |
| * ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include. | |
| (net_close, net_read_prim, net_write_prim): Make global. | |
| (net_open): Likewise. Pass an exception set to select. Whitespace fix. | |
| Document why we can not use gdb_select. | |
| (_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here. | |
| * ser-tcp.h: New file. | |
| * inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here. | |
| (handle_sigio): Use gdb_select. | |
| (initialize_stdin_serial): New function. | |
| * terminal.h (initialize_stdin_serial): New prototype. | |
| * top.c (gdb_init): Call initialize_stdin_serial. | |
| * mingw-hdep.c (gdb_select): New function, moved from gdb_select in | |
| event-loop.c. Add exception condition support. Use serial_for_fd | |
| and serial_wait_handle. Fix timeout handling. | |
| * posix-hdep.c: Include "gdb_select.h". | |
| (gdb_select): New function. | |
| * remote-st.c (connect_command): Use gdb_select. | |
| * ser-unix.c: Include "gdb_select.h". | |
| (hardwire_send_break, wait_for): Use gdb_select. | |
| 2006-02-10 Daniel Jacobowitz <dan@codesourcery.com> | |
| * Makefile.in (mingw-hdep.o, posix-hdep.o): New dependencies. | |
| (ALLDEPFILES): Add mingw-hdep.c and posix-hdep.c. | |
| * configure.ac: Add gdb_host_obs to CONFIG_OBS. Set gdb_host_obs | |
| to posix-hdep.o by default. | |
| * configure: Regenerated. | |
| * configure.host: Document gdb_host_obs. Add an entry for | |
| i[34567]86-*-mingw32*. | |
| * mingw-hdep.c, posix-hdep.c: New files. | |
| * utils.c (safe_strerror): Remove, moved to posix-hdep.o. | |
| 2006-02-10 Joel Brobecker <brobecker@adacore.com> | |
| * defs.h (gdb_osabi): New enum value GDB_OSABI_AIX. | |
| * osabi.c (gdb_osabi_name): Add name of new value GDB_OSABI_AIX. | |
| * rs6000-tdep.h: New file. | |
| * rs6000-tdep.c: Include "rs6000-tdep.h". | |
| (rs6000_gdbarch_init): Remove enabling of software single step. | |
| Will be done in the AIX-specific initialization routine. | |
| * rs6000-aix-tdep.c: New file. | |
| * config/powerpc/aix.mt (TDEPFILES): Add rs6000-aix-tdep.o. | |
| * Makefile.in (rs6000_tdep_h): New variable. | |
| (rs6000-tdep.o): Update dependencies. | |
| (rs6000-aix-tdep.o): New rule. | |
| 2006-02-10 Joel Brobecker <brobecker@adacore.com> | |
| * aix-thread.c (_initialize_aix_thread): Use add_setshow_boolean_cmd | |
| instead of add_setshow_zinteger_cmd to defined the aix-thread | |
| boolean setting. | |
| 2006-02-10 Nick Roberts <nickrob@snap.net.nz> | |
| * mi/gdb-mi.el: Update to reflect changes in Emacs 22.0.50. | |
| 2006-02-09 Daniel Jacobowitz <dan@codesourcery.com> | |
| * dwarf2read.c (struct dwarf2_per_cu_data): Reduce length to | |
| 30 bits. Add load_all_dies flag. | |
| (load_partial_dies): Load all DIEs if per_cu->load_all_dies is set. | |
| Load DW_TAG_member by default. Remove internal_error call. | |
| (find_partial_die): Reload the compilation unit if we can not find | |
| a DIE in the cache. Call internal_error here if we still can not | |
| find the DIE. | |
| 2006-02-10 Nick Roberts <nickrob@snap.net.nz> | |
| * breakpoint.c (print_one_breakpoint): Add break to case | |
| bp_catch_vfork in switch statement. | |
| 2006-02-08 Wu Zhou <woodzltc@cn.ibm.com> | |
| * config/i386/nm-i386sol2.h: Update copyright year. | |
| * config/mips/nm-irix5.h: Ditto. | |
| * config/sparc/nm-sol2.h: Ditto. | |
| * s390-nat.c: Ditto. | |
| * ppc-linux-nat.c: Ditto. | |
| 2006-02-08 Wu Zhou <woodzltc@cn.ibm.com> | |
| * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Delete. | |
| * config/i386/nm-i386sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New. | |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. | |
| * config/mips/nm-irix5.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New. | |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. | |
| * config/sparc/nm-sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New. | |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. | |
| * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): New. | |
| (inf_ttrace_region_size_ok_for_hw_watchpoint): Delete. | |
| (inf_ttrace_target): Delete to_region_size_ok_for_hw_watchpoint and | |
| add to_region_ok_for_hw_watchpoint. | |
| * s390-nat.c (s390_region_size_ok_for_hw_watchpoint): Delete. | |
| (s390_region_ok_for_hw_watchpoint): New. | |
| (_initialize_s390_nat): Delete to_region_size_ok_for_hw_watchpoint | |
| and add to_region_ok_for_hw_watchpoint. | |
| * target.c (default_region_size_ok_for_hw_watchpoint, | |
| debug_to_region_size_ok_for_hw_watchpoint): Delete prototype. | |
| (update_current_target): Delete to_region_size_ok_for_hw_watchpoint | |
| inheritance and default_region_size_ok_for_hw_watchpoint. | |
| (default_region_ok_for_hw_watchpoint): If len is less than or equal | |
| the length of void pointer, return ok. | |
| (default_region_size_ok_for_hw_watchpoint): Delete. | |
| (debug_to_region_size_ok_for_hw_watchpoint): Delete. | |
| (setup_target_debug): Delete to_region_size_ok_for_hw_watchpoint. | |
| * target.h (struct target_ops): Delete | |
| to_region_size_ok_for_hw_watchpoint. | |
| (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. | |
| 2006-02-08 Ben Elliston <bje@au1.ibm.com> | |
| Wu Zhou <woodzltc@cn.ibm.com> | |
| * ppc-linux-nat.c (PTRACE_GET_DEBUGREG, PTRACE_SET_DEBUGREG, | |
| PTRACE_GETSIGINFO): Define. | |
| (last_stopped_data_address): New. | |
| (ppc_linux_check_watch_resources): New function. | |
| (ppc_linux_region_ok_for_hw_watchpoint): New function. | |
| (ppc_linux_insert_watchpoint): New function. | |
| (ppc_linux_remove_watchpoint): New function. | |
| (ppc_linux_stopped_data_address): New function. | |
| (ppc_linux_stopped_by_watchpoint): New function. | |
| (_initialize_ppc_linux_nat): Set the above hardware watchpoint | |
| related target vectors. | |
| * rs6000-tdep.c (rs6000_gdbarch_init): Set PPC architectures | |
| to have nonsteppable watchpoint. | |
| * target.c (default_region_ok_for_hw_watchpoint, | |
| debug_to_region_ok_for_hw_watchpoint): New prototypes. | |
| (update_current_target): Inherit to_region_ok_for_hw_watchpoint | |
| and set default to_region_ok_for_hw_watchpoint. | |
| (default_region_ok_for_hw_watchpoint): New function. | |
| (debug_to_region_ok_for_hw_watchpoint): New function. | |
| (setup_target_debug): Set to_region_ok_for_hw_watchpoint of | |
| debug_target. | |
| * target.h (struct target_ops): Add a new target vector | |
| to_region_ok_for_hw_watchpoint. | |
| (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Define this if it is not | |
| defined anyplace else. | |
| 2005-02-07 Joel Brobecker <brobecker@adacore.com> | |
| * symfile.c (add_symbol_file_command): Abort if the user forgot | |
| to provide the address when the file has been loaded. | |
| 2006-02-07 Daniel Jacobowitz <dan@codesourcery.com> | |
| * MAINTAINERS: Update file based on maintainers survey. Add | |
| a note to Past Maintainers. Move unresponsive or inactive | |
| maintainers to Authorized Committers or Past Maintainers as | |
| appropriate. Correct Jim Kingdon's email address. Remove | |
| vacant areas of responsibility. | |
| 2006-02-06 Vladimir Prus <ghost@cs.msu.su> | |
| * breakpoint.c (print_one_breakpoint): For MI-like UI, output | |
| fullname field. | |
| 2006-02-03 Daniel Jacobowitz <dan@codesourcery.com> | |
| * exceptions.h (enum errors): Rename NO_ERROR to GDB_NO_ERROR. | |
| * exceptions.c (exception_none, exceptions_state_mc_init) | |
| (throw_vfatal): Use GDB_NO_ERROR. | |
| 2006-02-02 Mark Kettenis <kettenis@gnu.org> | |
| * solib-svr4.h (struct link_map_offsets): Remove r_debug_size and | |
| r_map_size members. Add r_version_offset, r_version_size and | |
| r_ldsomap_offset members. | |
| * solib-svr4.c (solib_svr4_r_map): Renamed from | |
| fetch_link_map_member. Simplify using read_memory_typed_address. | |
| (solib_svr4_r_ldsomap): New function. | |
| (open_symbol_file_object): Use solib_svr_r_map. | |
| (svr4_current_sos): Use solib_svr4_r_map and look for the dynamic | |
| linker by using solib_svr4_r_ldsomap. | |
| (svr4_ilp32_fetch_link_map_offsets) | |
| (svr4_lp64_fetch_link_map_offsets): Adjust for changes to `struct | |
| link_map_offsets'. | |
| * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Adjust for | |
| changes to `struct link_map_offsets'. | |
| * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets) | |
| (mipsnbsd_lp64_fetch_link_map_offsets): Adjust for changes to | |
| `struct link_map_offsets'. | |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-nat.c (struct saved_ptids, threads_to_delete) | |
| (record_dead_thread, prune_lwps, find_thread_from_lwp) | |
| (exit_lwp): New. | |
| (linux_nat_resume): Call prune_lwps. | |
| (wait_lwp, linux_nat_wait): Call exit_lwp. | |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> | |
| * printcmd.c (printf_command): Make format string checking | |
| stricter. Add separate cases for long_arg, ptr_arg, and | |
| long_double_arg. | |
| * utils.c (xstrvprintf): Improve the error message issued | |
| for a bad format string. | |
| * Makefile.in (GDB_WARN_CFLAGS_NO_FORMAT, INTERNAL_CFLAGS_BASE): | |
| New variables. | |
| (gnu-v3-abi.o, monitor.o, procfs.o, linux-thread-db.o): Remove | |
| $(NO_WERROR_CFLAGS). | |
| (printcmd.o): Likewise. Use $(GDB_WARN_CFLAGS_NO_FORMAT) and | |
| enable -Werror. | |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> | |
| * Makefile.in (remote.o): Update. | |
| * remote.c (show_packet_config_cmd): Shorten messages. | |
| (remote_set_cmdlist, remote_show_cmdlist): Make file-static. | |
| (show_remote_cmd): Iterate. | |
| (_initialize_remote): Remove remote_set_cmdlist, | |
| remote_show_cmdlist. | |
| 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com> | |
| * Makefile.in (gdbtypes_h, gdbtypes.o, utils.o): Update. | |
| * defs.h (hashtab_obstack_allocate, dummy_obstack_deallocate): Add | |
| prototypes. | |
| * dwarf2read.c (read_subroutine_type): Use TYPE_ZALLOC. | |
| (hashtab_obstack_allocate, dummy_obstack_deallocate): Moved to... | |
| * utils.c (hashtab_obstack_allocate, dummy_obstack_deallocate): | |
| ...here. | |
| * gdbtypes.c: Include "hashtab.h". | |
| (build_gdbtypes): Remove extra prototype. | |
| (struct type_pair, type_pair_hash, type_pair_eq) | |
| (create_copied_types_hash, copy_type_recursive): New. | |
| * gdbtypes.h: Include "hashtab.h". | |
| (TYPE_ZALLOC): New. | |
| (create_copied_types_hash, copy_type_recursive): New prototypes. | |
| * objfiles.c (free_objfile): Call preserve_values. | |
| * symfile.c (reread_symbols): Likewise. | |
| (clear_symtab_users): Remove calls to clear_value_history and | |
| clear_internalvars. | |
| * value.c (clear_value_history, clear_internalvars): Removed. | |
| (preserve_one_value, preserve_values): New functions. | |
| * value.h (clear_value_history, clear_internalvars): Removed. | |
| (preserve_values): New prototype. | |
| * tracepoint.c (_initialize_tracepoint): Do not initialize convenience | |
| variables here. | |
| 2006-01-29 Mark Kettenis <kettenis@gnu.org> | |
| * amd64-tdep.c (amd64_classify): Handle TYPE_CODE_BOOL. | |
| Fixes PR tdep/2075. | |
| 2006-01-27 Joel Brobecker <brobecker@adacore.com> | |
| * MAINTAINERS: Use a consistent email address for brobecker. | |
| 2006-01-27 Joel Brobecker <brobecker@adacore.com> | |
| * infcmd.c (post_create_inferior): Fix copy/paste error introduced | |
| in the previous change. | |
| 2006-01-24 Daniel Jacobowitz <dan@codesourcery.com> | |
| PR gdb/1914 | |
| * fork-child.c (fork_inferior): Don't call | |
| solib_create_inferior_hook. | |
| * infcmd.c (post_create_inferior): Call solib_add, | |
| solib_create_inferior_hook, and re_enable_breakpoints_in_shlibs. | |
| (attach_command): Don't call solib_add or | |
| re_enable_breakpoints_in_shlibs. Call post_create_inferior | |
| instead. | |
| * remote.c (remote_open_1): Don't call solib_create_inferior_hook | |
| or observer_notify_inferior_created. Call post_create_inferior | |
| instead. | |
| * corelow.c: Don't include "observer.h". | |
| (solib_add_stub): Deleted. | |
| (core_open): Don't call observer_notify_inferior_created or | |
| solib_add_stub. Call post_create_inferior instead. | |
| * inf-ptrace.c: Don't include "observer.h". | |
| (inf_ptrace_attach): Don't call observer_notify_inferior_created. | |
| * inf-ttrace.c: Don't include "observer.h". | |
| (inf_ttrace_attach): Don't call observer_notify_inferior_created. | |
| * inferior.h (solib_create_inferior_hook): Remove redundant | |
| prototype. | |
| * inftarg.c: Don't include "observer.h". | |
| (child_attach): Don't call observer_notify_inferior_created. | |
| * Makefile.in: Update dependencies. | |
| 2006-01-24 Daniel Jacobowitz <dan@codesourcery.com> | |
| * infcmd.c: Include "observer.h". | |
| (post_create_inferior): New function. | |
| (run_command_1): Call it. Also call proceed. | |
| * inferior.h (post_create_inferior): New prototype. | |
| * Makefile.in (infcmd.o): Update. | |
| * gnu-nat.c (gnu_create_inferior): Don't call proceed. | |
| * go32-nat.c (go32_create_inferior): Likewise. | |
| * nto-procfs.c (procfs_create_inferior): Likewise. | |
| * procfs.c (procfs_create_inferior): Likewise. | |
| * remote-sim.c (gdbsim_create_inferior): Likewise. | |
| * remote.c (extended_remote_create_inferior) | |
| (extended_remote_async_create_inferior): Likewise. | |
| * win32-nat.c (win32_create_inferior): Likewise. | |
| * wince.c (child_create_inferior): Likewise. | |
| * monitor.c (monitor_create_inferior): Don't call proceed. | |
| Set the PC manually. | |
| * ocd.c (ocd_create_inferior): Likewise. | |
| * remote-e7000.c (e7000_create_inferior): Likewise. | |
| * remote-m32r-sdi.c (m32r_create_inferior): Likewise. | |
| * remote-mips.c (mips_create_inferior): Likewise. | |
| * remote-rdp.c (remote_rdp_create_inferior): Likewise. | |
| * remote-sds.c (sds_create_inferior): Likewise. | |
| * remote-st.c (st2000_create_inferior): Likewise. | |
| * inf-ptrace.c (inf_ptrace_create_inferior): Don't call | |
| proceed or observer_notify_inferior_created. | |
| * inf-ttrace.c (inf_ttrace_create_inferior): Likewise. | |
| * inftarg.c (child_create_inferior): Likewise. | |
| 2006-01-24 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-thread-db.c (thread_db_mourn_inferior): Remove breakpoints | |
| after mourning the inferior. | |
| 2006-01-24 Jim Blandy <jimb@redhat.com> | |
| * valarith.c (binop_user_defined_p): Handle refs to typedefs. | |
| 2006-01-24 Fred Fish <fnf@specifix.com> | |
| * parse.c (source.h): Include. | |
| (parse_exp_in_context): Use static source context if no | |
| other context found. | |
| 2006-01-23 Andrew Stubbs <andrew.stubbs@st.com> | |
| * sh-tdep.c: Include reggroups.h. | |
| (sh_register_reggroup_p): New function. | |
| (sh_gdbarch_init): Add call to set_gdbarch_register_reggroup_p. | |
| * Makefile.in (sh-tdep.o): Add dependency on reggroups.h. | |
| 2006-01-23 Andrew Stubbs <andrew.stubbs@st.com> | |
| * cli/cli-cmds.c: Include fcntl.h. | |
| (source_command): Use the GDB search path to find script files. | |
| 2006-01-22 Daniel Jacobowitz <dan@codesourcery.com> | |
| PR tdep/2029 | |
| Suggested by Till Straumann <strauman@slac.stanford.edu>: | |
| * rs6000-tdep.c (skip_prologue): Update check for later mtlr | |
| instructions. Handle PIC bcl. | |
| 2006-01-22 Daniel Jacobowitz <dan@codesourcery.com> | |
| * config/djgpp/README: Typo fix. | |
| * config/djgpp/fnchange.lst: Update. | |
| 2006-01-22 Mark Kettenis <kettenis@gnu.org> | |
| * sparc-tdep.h (struct gdbarch_tdep): Add step_trap member. | |
| (sparc_address_from_register): New prototype. | |
| (sparcnbsd_step_trap): New prototype. | |
| * sparc-tdep.c (sparc_address_from_register): Make globally | |
| visible. | |
| (sparc_analyze_control_transfer): Change prototype to accept | |
| `struct gdbarch *' as first argument. Allow for optional hnadling | |
| for trap instructions. | |
| (sparc_step_trap): New function. | |
| (sparc_software_single_step): Adjust call to | |
| sparc_analyze_control_trabsfer. | |
| (sparc32_gdbarch_init): Initialize TDEP->step_trap. | |
| * sparcnbsd-tdep.c (sparcnbsd_step_trap): New function. | |
| (sparc32nbsd_init_abi): Set TDEP->step_trap. | |
| * sparc64obsd-tdep.c (sparc64obsd_init_abi): Set TDEP->step_trap. | |
| * sparc64nbsd-tdep.c (sparc64nbsd_init_abi): Set TDEP->step_trap. | |
| * sparc-tdep.c (sparc32_return_value): Convert to use | |
| RETURN_VALUE_ABI_PRESERVES_ADDRESS instead of | |
| RETURN_VALUE_STRUCT_CONVENTION. | |
| (sparc32_extract_struct_value_address): Remove. | |
| 2006-01-21 Daniel Jacobowitz <dan@codesourcery.com> | |
| * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address) | |
| (avr_extract_return_value, avr_frame_prev_register): Use gdb_byte. | |
| 2006-01-21 Daniel Jacobowitz <dan@codesourcery.com> | |
| * solib.c (info_sharedlibrary_command): Avoid internal_error. | |
| 2006-01-21 Mark Kettenis <kettenis@gnu.org> | |
| * i386-tdep.c (i386_mxcsr_type): New variable. | |
| (i386_init_types): Initialize i386_mxcsr_type. | |
| (i386_register_type): Return i386_mxcsr_type for %mxcsr. | |
| * i386-tdep.c (i386_mxcsr_type): New extern. | |
| * amd64-tdep.c (amd64_register_info): Return i386_mxcsr_type for | |
| %mxcsr. | |
| 2006-01-20 Mark Mitchell <mark@codesourcery.com> | |
| * Makefile.in (remote-rdi.o): Remove. | |
| (rdi-share/libangsd.a): Likewise. | |
| * README: Don't mention remote-rdi.c. | |
| * NEWS: Mention removal of rdi-share. | |
| * configure.ac: Don't configure rdi-share subdirectory. | |
| * remote-rdi.c: Remove. | |
| * config/arm/embed.mt (TDEPFILES): Remove remote-rdi.o. | |
| (TDEPLIBS): Remove rdi-share/libangsd.a. | |
| * rdi-share/Makefile.am: Remove. | |
| * rdi-share/Makefile.in: Likewise. | |
| * rdi-share/README.CYGNUS: Likewise. | |
| * rdi-share/aclocal.m4: Likewise. | |
| * rdi-share/adp.h: Likewise. | |
| * rdi-share/adperr.h: Likewise. | |
| * rdi-share/angel.h: Likewise. | |
| * rdi-share/angel_bytesex.c: Likewise. | |
| * rdi-share/angel_bytesex.h: Likewise. | |
| * rdi-share/angel_endian.h: Likewise. | |
| * rdi-share/ardi.c: Likewise. | |
| * rdi-share/ardi.h: Likewise. | |
| * rdi-share/armdbg.h: Likewise. | |
| * rdi-share/buffers.h: Likewise. | |
| * rdi-share/chandefs.h: Likewise. | |
| * rdi-share/channels.h: Likewise. | |
| * rdi-share/chanpriv.h: Likewise. | |
| * rdi-share/configure: Likewise. | |
| * rdi-share/configure.in: Likewise. | |
| * rdi-share/crc.c: Likewise. | |
| * rdi-share/crc.h: Likewise. | |
| * rdi-share/dbg_conf.h: Likewise. | |
| * rdi-share/dbg_cp.h: Likewise. | |
| * rdi-share/dbg_hif.h: Likewise. | |
| * rdi-share/dbg_rdi.h: Likewise. | |
| * rdi-share/devclnt.h: Likewise. | |
| * rdi-share/devices.h: Likewise. | |
| * rdi-share/devsw.c: Likewise. | |
| * rdi-share/devsw.h: Likewise. | |
| * rdi-share/drivers.c: Likewise. | |
| * rdi-share/drivers.h: Likewise. | |
| * rdi-share/etherdrv.c: Likewise. | |
| * rdi-share/ethernet.h: Likewise. | |
| * rdi-share/host.h: Likewise. | |
| * rdi-share/hostchan.c: Likewise. | |
| * rdi-share/hostchan.h: Likewise. | |
| * rdi-share/hsys.c: Likewise. | |
| * rdi-share/hsys.h: Likewise. | |
| * rdi-share/logging.c: Likewise. | |
| * rdi-share/logging.h: Likewise. | |
| * rdi-share/msgbuild.c: Likewise. | |
| * rdi-share/msgbuild.h: Likewise. | |
| * rdi-share/params.c: Likewise. | |
| * rdi-share/params.h: Likewise. | |
| * rdi-share/rx.c: Likewise. | |
| * rdi-share/rxtx.h: Likewise. | |
| * rdi-share/serdrv.c: Likewise. | |
| * rdi-share/serpardr.c: Likewise. | |
| * rdi-share/sys.h: Likewise. | |
| * rdi-share/tx.c: Likewise. | |
| * rdi-share/unixcomm.c: Likewise. | |
| * rdi-share/unixcomm.h: Likewise. | |
| 2006-01-21 Mark Kettenis <kettenis@gnu.org> | |
| * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_prev_register): | |
| Change type of last argument to `gdb_byte *'. | |
| 2006-01-20 Mark Kettenis <kettenis@gnu.org> | |
| * hppa-tdep.h (hppa_in_solib_call_trampoline) | |
| (hppa_skip_trampoline_code): New prototypes. | |
| * hppa-tdep.c (struct insn_pattern): New. | |
| (hppa_long_branch_stub, hppa_long_branch_pic_stub) | |
| (hppa_import_stub, hppa_import_pic_stub, hppa_plt_stub): Moved | |
| here from hppa-linux-tdep.c | |
| (HPPA_MAX_INSN_PATTERN_LEN): New define. | |
| (hppa_match_insns, hppa_match_insns_relaxed, hppa_in_dyncall) | |
| (hppa_in_solib_call_trampoline, hppa_skip_trampoline_code): New | |
| functions based on functions removed from hppa-linux-tdep.c. | |
| * hppa-linux-tdep.c (hppa_long_branch_stub) | |
| (hppa_long_branch_pic_stub, hppa_import_stub) | |
| (hppa_import_pic_stub, hppa_plt_stub): Moved to hppa-tdep.c. | |
| (insns_match_pattern_relaxed, hppa_linux_in_dyncall) | |
| (hppa_linux_in_solib_call_trampoline) | |
| (hppa_linux_skip_trampoline_code): Removed. | |
| (hppa_linux_init_abi): Set TDEP->in_solib_call_tranpoline to | |
| hppa_in_solib_call_trampoline and skip_trampoline_code to | |
| hppa_skip_trampoline_code. | |
| * hppabsd-tdep.c (hppabsd_init_abi): Set | |
| TDEP->in_solib_call_trampoline and skip_trampoline_code. | |
| 2006-01-20 Jim Blandy <jimb@redhat.com> | |
| * MAINTAINERS: Change my E-mail address. | |
| * configure.ac: Add -Wno-pointer-sign to list of build warnings. | |
| * configure: Regenerated. | |
| 2006-01-20 Daniel Jacobowitz <dan@codesourcery.com> | |
| * MAINTAINERS: Overhaul. | |
| 2006-01-18 Mark Kettenis <kettenis@gnu.org> | |
| Based on a previous patch form Michal Ludvig: | |
| * amd64-tdep.c (amd64_sse_type): Remove. | |
| (amd64_register_info): Use i386_eflags_type and i386_sse_type | |
| where appropriate. | |
| (AMD64_NUM_REGS): Use ARRAY_SIZE. | |
| (amd64_register_type): Remove code to build amd_sse_type. | |
| * i386-tdep.c (i386_eflag_type): New variable. | |
| (i386_mmx_type, i386_sse_type): Make global. | |
| (i386_init_types): New function. | |
| (i386_build_mmx_type, i386_build_sse_type): Remove functions. | |
| (i386_register_type): Return i386_eflag_type, i386_sse_type and | |
| i386_mmx_type when appropriate. | |
| (_initialize_i386_tdep): Call i386_init_types. | |
| * i386-tdep.h (i386_eflags_type, i386_mmx_type, i386_sse_type): | |
| Declare extern. | |
| Based on a previous patch form Michal Ludvig: | |
| * gdbtypes.c (append_flags_type_flag, init_flags_type): New | |
| functions. | |
| (is_integral_type, rank_one_type, recursive_dump_type): Add | |
| support for TYPE_CODE_FLAGS. | |
| * gdbtypes.h (enum type_code): Add TYPE_CODE_FLAGS. | |
| (append_flags_type_field, init_flags_type): New prototypes. | |
| * ada-valprint.c (ada_val_print_1): Add support for | |
| TYPE_CODE_FLAGS. | |
| * c-valprint.c (c_val_print): Likewise. | |
| * f-valprint.c (f_val_print): Likewise. | |
| * p-valprint.c (pascal_val_print): Likewise. | |
| * valprint.c (val_print_type_code_flags): New function. | |
| * valprint.h (val_print_type_code_flags): New prototype. | |
| * value.c (unpack_long, value_from_longest): Add support for | |
| TYPE_CODE_FLAGS. | |
| 2006-01-17 Christopher Faylor <cgf@timesys.com> | |
| * MAINTAINERS: Very belatedly remove myself from from the list of | |
| people caught up in the paper trail. | |
| 2006-01-17 Jim Blandy <jimb@redhat.com> | |
| * symtab.h (struct general_symbol_info): Use gdb_byte for | |
| value.bytes. | |
| * stabsread.c (define_symbol): Use gdb_byte for the buffer holding | |
| a floating-point constant's value. | |
| * dwarf2read.c (dwarf2_const_value): Remove casts of value buffer | |
| to char *. | |
| * findvar.c (read_var_value): Eliminate needless temporary. | |
| * dwarf2-frame.c (dwarf2_read_section): Update forward declaration | |
| to match prior change to dwarf2_read_section's type. | |
| 2006-01-16 Paul Gilliam <pgilliam@us.ibm.com> | |
| * ppc-tdep.h (PPC_MAX_EPILOGUE_INSTRUCTIONS): New define. | |
| * rs6000-tdep.c (insn_changes_sp_or_jumps) | |
| (rs6000_in_function_epilogue_p): New functions. | |
| (rs6000_gdbarch_init): Set in_function_epilogue_p. | |
| 2006-01-17 Jim Blandy <jimb@redhat.com> | |
| * dwarf2read.c (struct dwarf2_per_objfile, struct comp_unit_head) | |
| (struct line_header, struct partial_die_info, struct dwarf_block): | |
| Use gdb_byte for members that refer to Dwarf section contents. | |
| (dwarf2_read_abbrevs, dwarf2_read_section, dwarf_decode_lines, | |
| dwarf_decode_macros, load_comp_unit, load_partial_dies, | |
| locate_pdi_sibling, partial_read_comp_unit_head, peek_die_abbrev, | |
| read_1_byte, read_1_signed_byte, read_2_bytes, read_4_bytes, | |
| read_8_bytes, read_address, read_attribute, read_attribute_value, | |
| read_comp_unit, read_comp_unit_head, read_die_and_children, | |
| read_die_and_siblings, read_full_die, read_indirect_string, | |
| read_initial_length, read_n_bytes, read_offset, read_partial_die, | |
| read_signed_leb128, read_string, read_unsigned_leb128, | |
| skip_children, skip_leb128, skip_one_die): Same. | |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> | |
| * complaints.c (stop_whining): Make signed. | |
| * linux-thread-db.c (thread_db_store_registers): Use gdb_byte. | |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> | |
| * dwarf2read.c, remote-fileio.c, remote.h: Update copyright | |
| notices. | |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> | |
| * dwarf2read.c (peek_die_abbrev, read_address, read_initial_length) | |
| (read_offset): Change BYTES_READ argument to unsigned int. | |
| (dwarf2_build_psymtabs_easy, read_comp_unit_head) | |
| (create_all_comp_units, dwarf2_get_pc_bounds) | |
| (dwarf_decode_line_header, var_decode_location) | |
| (dwarf_decode_macros): Change local BYTES_READ variables to | |
| unsigned int. | |
| (read_indirect_string): Remove obsolete cast. | |
| 2006-01-17 Daniel Jacobowitz <dan@codesourcery.com> | |
| * remote-fileio.c (remote_fileio_return_success): Take a gdb_byte | |
| argument. | |
| (remote_fileio_func_open, remote_fileio_func_rename) | |
| (remote_fileio_func_unlink, remote_fileio_func_stat) | |
| (remote_fileio_func_fstat, remote_fileio_func_gettimeofday) | |
| (remote_fileio_func_system): Cast the arguments to | |
| remote_read_bytes and remote_write_bytes. | |
| (remote_fileio_func_read, remote_fileio_func_write): Use a | |
| gdb_byte buffer. | |
| * remote.h (remote_read_bytes, remote_write_bytes): Update | |
| prototypes. | |
| * remote.c (hex2bin, bin2hex): Use gdb_byte for the BIN argument. | |
| (threadref_to_int): Replace bogus char * cast. | |
| (remote_unpack_thread_info_response): Use int for tag. | |
| (remote_threads_extra_info, remote_check_symbols): Cast string | |
| arguments to hex2bin. | |
| (remote_wait): Use a char buffer for packets and a gdb_byte | |
| buffer for registers. | |
| (remote_async_wait): Likewise. | |
| (remote_prepare_to_store, store_register_using_P) | |
| (remote_store_registers): Use gdb_byte buffers. | |
| (remote_write_bytes, remote_read_bytes): Use a gdb_byte pointer | |
| for MYADDR and char buffers for strings. | |
| (remote_xfer_partial): Add casts for string operations on READBUF. | |
| (remote_rcmd): Cast strings passed to bin2hex. | |
| 2006-01-16 Mark Mitchell <mark@codesourcery.com> | |
| * aclocal.m4: Regenerate. | |
| 2006-01-16 Nathan Sidwell <nathan@codesourcery.com> | |
| * mt-tdep.c (enum mt_gdb_regnums): Add MT_COPRO_PSEUDOREG_ARRAY, | |
| MT_COPRO_PSEUDOREG_DIM_1, MT_COPRO_PSEUDOREG_DIM_2, | |
| MT_COPRO_PSEUDOREG_REGS members. Adjust MT_NUM_PSEUDO_REGS. | |
| (mt_register_name): Lazily synthesize name for coprocessor pseudo | |
| array registers. | |
| (mt_copro_register_type): New. Broken out of ... | |
| (mt_register_type): ... here. Use it. Deal with coprocessor | |
| pseudo array. | |
| (mt_select_coprocessor): New. | |
| (mt_pseudo_register_read, mt_pseudo_register_write): Deal with | |
| coprocessor pseudo array. | |
| 2006-01-16 Andrew Stubbs <andrew.stubbs@st.com> | |
| * breakpoint.c (insert_breakpoints): Check that a thread exists | |
| before inserting thread specific breakpoints. | |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> | |
| * osabi.c (generic_elf_osabi_sniffer): Fix typo in previous | |
| commit. | |
| * alpha-tdep.c (alpha_gdbarch_init): Set cannot_step_breakpoint. | |
| * config/alpha/nm-osf.h (CANNOT_STEP_BREAKPOINT): Remove. | |
| * config/alpha/nm-linux.h (CANNOT_STEP_BREAKPOINT): Remove. | |
| * config/alpha/nm-nbsd.h: Remove file. | |
| * config/alpha/nm-fbsd.h: Remove file | |
| * config/alpha/nbsd.mh (NAT_FILE): Remove. | |
| * config/alpha/fbsd.mh (NAT_FILE): Remove. | |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * macroexp.c (expand): Initialize argc. | |
| * stabsread.c (read_type): Handle errors from read_args. | |
| (read_args): Return NULL for errors. | |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> | |
| * osabi.c (generic_elf_osabi_sniffer): Use memcmp instead of | |
| strcmp to compare string to a byte buffer. | |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * printcmd.c (output_command): Always initialize fmt.size. | |
| (printf_command): Use gdb_byte. | |
| * symfile.c (separate_debug_file_exists): Use gdb_byte. | |
| (load_section_callback, read_target_long_array): Likewise. | |
| (simple_read_overlay_table, simple_read_overlay_region_table) | |
| (simple_overlay_update_1): Correct calls to read_target_long_array. | |
| * valprint.c (partial_memory_read): Change MYADDR to a gdb_byte *. | |
| Also change local pointers. | |
| (val_print_string): Use gdb_byte. | |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> | |
| * alphafbsd-tdep.c: Include "solib-svr4.h". | |
| (alphafbsd_init_abi): Set solib_svr4_fetch_link_map_offsets to | |
| svr4_lp64_fetch_link_map_offsets. | |
| * Makefile.in (alphafbsd-tdep.o): Update dependencies. | |
| * config/alpha/fbsd.mt (TDEPFILES): Add corelow.o, solib.o and | |
| solib-svr4.o. | |
| * config/alpha/fbsd.mh (NATDEPFILES): Remove solib.o, solib-svr4.o | |
| and solib-legacy.o. | |
| * config/alpha/nm-fbsd.h: Don't include "solib.h". | |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * source.c (_initialize_source): Use add_setshow_integer_cmd. | |
| 2006-01-15 Daniel Jacobowitz <dan@codesourcery.com> | |
| * linux-fork.c (delete_fork_command, detach_fork_command): Use | |
| PIDGET. | |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> | |
| * arm-linux-tdep.c (arm_linux_svr4_fetch_link_map_offsets): | |
| Remove. | |
| (arm_linux_init_abi): Set solib_svr4_fetch_link_map_offsets to | |
| svr4_ilp32_fetch_link_map_offsets. | |
| * cris-tdep.c (cris_linux_svr4_fetch_link_map_offsets): Remove | |
| function. | |
| (cris_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to | |
| svr4_ilp32_fetch_link_map_offsets. | |
| * mips-linux-tdep.c (mips_linux_svr4_fetch_link_map_offsets) | |
| (mips64_linux_svr4_fetch_link_map_offsets): Remove functions. | |
| (mips_linux_init_abi): Set solib_svr4_fetch_link_map_offsets to | |
| svr4_ilp32_fetch_link_map_offsets or svr4_lp64_fetch_link_map_offsets | |
| where appropriate. | |
| * nbsd-tdep.c (nbsd_ilp32_solib_svr4_fetch_link_map_offsets): | |
| Simply call svr4_ilp32_fetch_link_map_offsets. | |
| (nbsd_lp64_solib_svr4_fetch_link_map_offsets): Simply call | |
| svr4_lp64_fetch_link_map_offsets. | |
| * ppc-linux-tdep.c (ppc_linux_svr4_fetch_link_map_offsets): Remove | |
| function. | |
| (ppc_linux_init_abi): Set solib_svr4_fetch_link_map_offsets to | |
| svr4_ilp32_fetch_link_map_offsets. | |
| * s390-tdep.c (s390_svr4_fetch_link_map_offsets) | |
| (s390x_svr4_fetch_link_map_offsets): Remove functions. | |
| (s390_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to | |
| svr4_ilp32_fetch_link_map_offsets or svr4_lp64_fetch_link_map_offsets | |
| where appropriate. | |
| 2006-01-15 Mark Kettenis <kettenis@gnu.org> | |
| * arm-tdep.c (arm_return_value): Change type of readbuf and | |
| writebuf arguments to `gdb_byte *'. | |
| * s390-tdep.c: Do not include "tm.h" and "../bfd/bfd.h". | |
| * Makefile.in (s390-tdep.o): Update dependencies. | |
| 2006-01-14 Mark Kettenis <kettenis@gnu.org> | |
| * sol2-tdep.h. sol2-tdep.c: New files. | |
| * amd64-sol2-tdep.c: Include "sol2-tdep.h". | |
| (amd64_sol2_init_abi): Set skip_solib_resolver. | |
| * i386-sol2-tdep.c: Include "sol2-tdep.h". | |
| (i386_sol2_init_abi): Set skip_solib_resolver. | |
| * sparc-sol2-tdep.c: Include "sol2-tdep.h". | |
| (sparc32_sol2_init_abi): Set skip_solib_resolver. | |
| * sparc64-sol2-tdep.c: Include "sol2-tdep.h". | |
| (sparc64_sol2_init_abi): Set skip_solib_resolver. | |
| * Makefile.in (sol2_tdep_h): New variable. | |
| (ALLDEPFILES): Add sol2-tdep.c. | |
| (sol2-tdep.o): New target. | |
| (amd64-sol2-tdep.o, i386-sol2-tdep.o, sparc-sol2-tdep.o) | |
| (sparc64-sol2-tdep.o): Update dependencies | |
| * config/i386/i386sol2.mt (TDEPFILES): Add sol2-tdep.o. | |
| * config/i386/sol2-64.mt (TDEPFILES): Add sol2-tdep.o. | |
| * config/sparc/sol2.mt (TDEPFILES): Add sol2-tdep.o. | |
| * config/sparc/sol2-64.mt (TDEPFILES): Add sol2-tdep.o. | |
| * hppa-linux-tdep.c: Fix copyright indentation. | |
| * hppa-tdep.h (enum hppa_regnum): Add HPPA_FP31R_REGNUM. | |
| * hppabsd-nat.c (hppabsd_fpregset_supplies_p) | |
| (hppabsd_supply_fpregset, hppabsd_collect_fpregset): New | |
| functions. | |
| (hppabsd_fetch_registers, hppabsd_store_registers): Handle | |
| floating-point registers. | |
| 2006-01-13 Mark Mitchell <mark@codesourcery.com> | |
| * event-loop.c (gdb_select): Detect file descriptors that have | |
| been closed. | |
| 2006-01-13 Mark Kettenis <kettenis@gnu.org> | |
| * hppabsd-tdep.c (hppabsd_init_abi): Set long_double_bit to 64, | |
| and long_double_format accordingly. | |
| 2006-01-12 Paul N. Hilfinger <hilfinger@adacore.com> | |
| * ada-exp.y (yyerror): Change message to ignore the argument, avoiding | |
| translation problems. | |
| * ada-lang.c (ada_value_struct_elt): Change interface and handling | |
| of errors to avoid translation problem (and less than optimal error | |
| messages). | |
| (ada_value_tag, ada_tag_name_1, ada_tag_name_2, ada_evaluate_subexp): | |
| Use new interface to ada_value_struct_elt. | |
| * ada_lang.h (ada_value_struct_elt): Update declaration to new | |
| interface. | |
| * ChangeLog: remove reference to ada-tasks.c from entry of | |
| 2006-01-07. | |
| 2006-01-11 Mark Kettenis <kettenis@gnu.org> | |
| * remote.c (get_memory_packet_size, set_thread) | |
| (remote_unpack_thread_info_response, remote_get_threadinfo) | |
| (parse_threadlist_response, remote_get_threadlist) | |
| (remote_current_thread, remote_threads_info) | |
| (remote_threads_extra_info, extended_remote_restart, get_offsets) | |
| (remote_check_symbols, remote_open_1, remote_detach) | |
| (remote_async_wait, remote_fetch_registers) | |
| (remote_store_registers, check_binary_download, putpkt_binary) | |
| (remote_insert_breakpoint, remote_insert_watchpoint) | |
| (remote_remove_watchpoint, remote_insert_hw_breakpoint) | |
| (remote_remove_hw_breakpoint, remote_xfer_partial, remote_rcmd) | |
| (packet_command): Remove redundant parenthesis. | |
| 2006-01-10 Mark Kettenis <kettenis@gnu.org> | |
| * corefile.c (read_memory_integer, read_memory_unsigned_integer) | |
| (read_memory_typed_address, write_memory) | |
| (write_memory_unsigned_integer, write_memory_signed_integer): Use | |
| gdb_byte where appropriate. | |
| * mi/mi-main.c (mi_cmd_data_read_memory): Change type of mbus into | |
| 'gdb_byte *'. | |
| * target.h (target_read_memory_partial, target_write_memory_partial): | |
| Change second argument to 'gdb_byte *'. | |
| * target.c (target_xfer_memory_partial): Change third argument to | |
| 'gdb_byte *'. | |
| (target_read_memory_partial, target_write_memory_partial): Change | |
| second argument to 'gdb_byte *'. | |
| * linespec.c (decode_objc): Make i1 and i2 unsigned. | |
| (find_method): Set values.sals to NULL. | |
| 2006-01-09 Mark Kettenis <kettenis@gnu.org> | |
| * amd64obsd-nat.c (amd64obsd_supply_pcb): Use 'gdb_byte *' instead | |
| of 'char *' in cast. | |
| 2006-01-07 Paul N. Hilfinger <hilfinger@adacore.com> | |
| * ada-exp.y, ada-lex.l, ada-typeprint.c: I18n markup. | |
| * ada-lang.c: I18n markup. | |
| Editorial: change "can not" => "cannot" throughout. | |
| 2006-01-07 Mark Kettenis <kettenis@gnu.org> | |
| * Makefile.in: Sort dependencies. | |
| 2006-01-07 Eli Zaretskii <eliz@gnu.org> | |
| * top.c (control_level): Remove unused variable. | |
| 2006-01-06 Fred Fish <fnf@specifix.com> | |
| * objfiles.c (source.h): Include. | |
| (free_objfile): Update comment about clear_symtab_users(). | |
| (free_objfile): Check all symtabs of objfile being freed and if | |
| one of them is the current source symtab, call | |
| clear_current_source_symtab_and_line(). | |
| 2006-01-04 Michael Snyder <msnyder@redhat.com> | |
| Checkpoint/Restart for Linux. | |
| * linux-nat.c: Add support for debugging multiple forks. | |
| Add #include for linux-fork.h (interface spec). | |
| (super_mourn_inferior): New function pointer. | |
| (child_mourn_inferior): New function / target method. | |
| (linux_target): Claim to_mourn_inferior method pointer. | |
| (child_follow_fork): Call interface to linux-fork, conditionally | |
| add new fork processes to list of debugged processes. | |
| (kill_inferior): Use interface to linux-fork to kill | |
| multiple processes. | |
| * linux-fork.h: New file. | |
| * linux-fork.c: New file. Support for debugging multiple forks | |
| of the same program. Support for checkpoint and restart commands. | |
| * infrun.c (nullify_last_target_wait_ptid): New function. | |
| * Makefile.in: Add linux-fork. | |
| * config/*/linux.mh: Add linux-fork. | |
| * NEWS: Mention new functionality. | |
| 2006-01-02 Paul Hilfinger <hilfingr@nile.gnat.com> | |
| * ada-exp.y (syntax definitions,write_var_or_type,write_name_assoc): | |
| Change uses of "illegal" to "invalid". | |
| 2006-01-02 Paul N. Hilfinger <hilfinger@adacore.com> | |
| * ada-exp.y: Considerable reorganization to move functionality | |
| from ada-lex.l to here, where it is logically more appropriate. | |
| The original reason, however, was to prevent premature name | |
| lookups for selector names in record aggregates. | |
| (BLOCKNAME, TYPENAME, OBJECT_RENAMING): Remove; lexer now returns | |
| NAME for all of these. | |
| (VAR): New artificial token to clarify precedence rules. | |
| (OTHERS): New lexeme. | |
| (empty_stoken): New symbol. | |
| (%union): Remove ssym, voidval. | |
| (%type): Remove <voidval> type declarations. | |
| (syntax definitions): Add aggregates. | |
| Remove distinction between NAME, TYPENAME, BLOCKNAME, OBJECT_RENAMING. | |
| Rename some non-terminals to be closer to reference manual usage. | |
| Tighten up expression syntax to disallow certain non-Ada | |
| constructions such as X and then Y or else Z. | |
| (ada_parse): Remove initialization of left_block_context. | |
| (write_var_from_name): Remove. | |
| (write_var_or_type): New function, containing previous code from | |
| defunct write_var_from_name and name_lookup. | |
| (block_lookup): New function, moved from ada-lex.l | |
| (select_possible_type_sym): New function, factored out of | |
| name_lookup, which used to be in ada-lex.l. | |
| (find_primitive_type): Ditto. | |
| (chop_selector): Ditto. | |
| (write_ambiguous_var): New function, factored out of defunct | |
| write_var_from_name. | |
| (write_selectors): New function. | |
| (write_name_assoc): New function. | |
| (write_exp_op_with_string): New function. | |
| * ada-lex.l (processId): Change interface to return stoken. | |
| (tempbuf, resize_tempbuf, tempbuf_size, tempbuf_len): Remove. | |
| (block_lookup, name_lookup): Remove. Functionality moved to | |
| ada-exp.y. | |
| (state IN_STRING): Remove. | |
| (rules): Handle string escapes in processString. | |
| Add 'others' token. | |
| Return all NAMEs, BLOCKNAMEs, OBJECT_RENAMINGs, TYPENAMEs in | |
| yylval.sval (as simple strings). | |
| All name look-ups now handled in ada-exp.y. | |
| Introduce "::" (COLONCOLON) token and return as separate token. | |
| (processId): Change return convention. Comment. | |
| Leave leading "'" in place. | |
| (processString): New function. | |
| (find_dot_all): Add note to comment. | |
| Fix problem that allowed match only at the end. | |
| * ada-lang.c: Introduce aggregates. | |
| (find_struct_field): Add new parameter to count fields skipped, and | |
| allow other output parameters to be NULL. | |
| (value_tag_from_contents_and_address, ada_value_struct_elt): Use | |
| new find_struct_field. | |
| (ada_index_struct_field, assign_aggregate, ada_is_array_type) | |
| (num_visible_fields, ada_index_struct_field_1, ada_index_struct_field) | |
| (num_component_specs, assign_component, assign_aggregate): | |
| (aggregate_assign_from_choices,aggregate_assign_positional) | |
| (aggregate_assign_others,add_component_interval): | |
| New functions. | |
| (ada_evaluate_subexp): Declare. | |
| Add aggregate-related operators. | |
| (ada_forward_operator_length): Declare. | |
| (resolve_subexp): Add cases for new aggregate operators and OP_NAME. | |
| Consolidate Ada operators, using ada_forward_operator_length. | |
| (ada_search_struct_field): Search in forward order. | |
| (ADA_OPERATORS): Add new aggregate operators. | |
| (ada_operator_length, ada_op_name, ada_forward_operator_length) | |
| (ada_dump_subexp_body, ada_print_subexp): Handle new aggregate | |
| operators and OP_NAME. | |
| (ada_type_of_array): Use longest_to_int. | |
| (value_assign_to_component): New function. | |
| (ada_forward_operator_length, ada_op_name, ada_dump_subexp_body): | |
| Add OP_NAME case. | |
| (ada_forward_operator_length, ada_dump_subexp_body): | |
| Add OP_STRING case. | |
| * ada-lang.h (enum ada_operator): Add OP_AGGREGATE, OP_OTHERS, | |
| OP_CHOICES, OP_DISCRETE_RANGE, OP_POSITIONAL. | |
| 2006-01-02 Paul N. Hilfinger <hilfinger@adacore.com> | |
| * ada-lang.c (process_raise_exception_name): Remove extraneous | |
| definition from unsubmitted code. | |
| (is_lower_alphanum): New function. | |
| (ada_decode): Add support for decoding protected object subprograms | |
| and entries, and of entities declared inside protected object | |
| subprograms. | |
| Also add missing handling for__{DIGITS}+ suffixes. | |
| Allow '$<digits>' as valid overloading suffix. | |
| (is_name_suffix): Add handling for protected type entriy suffixes. | |
| Also add support for protected type subprogram suffixes, but keep | |
| it commented out for now, as there is an ambiguity between these | |
| entities and other internally generated entities. | |
| Allow '$<digits>' as valid overloading suffix. | |
| (is_valid_name_for_wild_match): New function. | |
| (wild_match): Add an exra level of verification of the entity name | |
| before declaring it a match for the given pattern. | |
| (ada_type_of_array, ada_evaluate_subexp): Use more proper | |
| longest_to_int rather than cast. | |
| (ada_evaluate_subexp): Use "invalid" rather than "illegal" in comment. | |
| (ada_coerce_to_simple_array): Call check_size to make sure | |
| that the object size is reasonable. | |
| (ada_value_primitive_packed_val): Use correct location in target | |
| buffer for extracting packed record fields that are themselves records. | |
| (add_defn_to_vec): Do not try to replace a stub type by its full | |
| type. Avoids a potential infinite loop. | |
| (ada_lookup_symbol): Move return incorrectly placed return statement, | |
| causing a loop that should be scanning all object files to only | |
| scan the first one. | |
| (ada_tag_name_2): New function. | |
| (ada_tag_name_1): If no 'tsd' field found in the dispatching table, | |
| use alternative representation. | |
| (ada_find_renaming_symbol): Strip the function name suffix when | |
| computing the XR type name. | |
| (ada_to_fixed_type): Try determining the tag only if we have the | |
| object's address. | |
| (to_fixed_array_type): Add comments. | |
| (ada_check_typedef): Replace expression checking whether the given | |
| type is a stub or not by a "call" to TYPE_STUB. Clearer and more | |
| consistent. | |
| * ada-lang.h (ADA_KNOWN_AUXILIARY_FUNCTION_NAME_PATTERNS): Allow | |
| '$' in addition to '.' for runtime auxiliary function name suffixes. | |
| See changes to ada_decode above. | |
| (struct task_control_block): Add field called_task. (This change is | |
| to keep synchronized with our local sources; it does not affect the | |
| public version yet.) | |
| * ada-typeprint.c (ada_print_type): Use int_string for printing | |
| modulus of modular type. | |
| (print_range): Trivial editorial comment fix. | |
| * ada-valprint.c (ada_emit_char): Use normal Ada syntax for | |
| double quote in string. | |
| 2006-01-01 Joel Brobecker <brobecker@adacore.com> | |
| * top.c: Add 2006 to list of copyright years in file header. | |
| 2006-01-01 Joel Brobecker <brobecker@adacore.com> | |
| * top.c (print_gdb_version): Update copyright year to 2006. | |
| 2006-01-01 Roger Sayle <roger@eyesopen.com> | |
| Elena Zannoni <ezannoni@redhat.com> | |
| PR symtab/1651 | |
| * xcoffread.c (xcoff_next_symbol_text): Check this_symtab_psymtab | |
| for NULL before assigning this_symtab_psymtab->objfile to objfile. | |
| (scan_xcoff_symtab): Initialize next_symbol_text_func. | |
| (Committed by Jim Blandy) | |
| For older changes see ChangeLog-2005. | |
| Local Variables: | |
| mode: change-log | |
| left-margin: 8 | |
| fill-column: 74 | |
| version-control: never | |
| End: |