| /* libthread_db assisted debugging support, generic parts. | |
| Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 2008 | |
| Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "gdb_assert.h" | |
| #include <dlfcn.h> | |
| #include "gdb_proc_service.h" | |
| #include "gdb_thread_db.h" | |
| #include "bfd.h" | |
| #include "exceptions.h" | |
| #include "gdbthread.h" | |
| #include "inferior.h" | |
| #include "symfile.h" | |
| #include "objfiles.h" | |
| #include "target.h" | |
| #include "regcache.h" | |
| #include "solib-svr4.h" | |
| #include "gdbcore.h" | |
| #include "observer.h" | |
| #include "linux-nat.h" | |
| #include <signal.h> | |
| #ifdef HAVE_GNU_LIBC_VERSION_H | |
| #include <gnu/libc-version.h> | |
| #endif | |
| #ifndef LIBTHREAD_DB_SO | |
| #define LIBTHREAD_DB_SO "libthread_db.so.1" | |
| #endif | |
| /* GNU/Linux libthread_db support. | |
| libthread_db is a library, provided along with libpthread.so, which | |
| exposes the internals of the thread library to a debugger. It | |
| allows GDB to find existing threads, new threads as they are | |
| created, thread IDs (usually, the result of pthread_self), and | |
| thread-local variables. | |
| The libthread_db interface originates on Solaris, where it is | |
| both more powerful and more complicated. This implementation | |
| only works for LinuxThreads and NPTL, the two glibc threading | |
| libraries. It assumes that each thread is permanently assigned | |
| to a single light-weight process (LWP). | |
| libthread_db-specific information is stored in the "private" field | |
| of struct thread_info. When the field is NULL we do not yet have | |
| information about the new thread; this could be temporary (created, | |
| but the thread library's data structures do not reflect it yet) | |
| or permanent (created using clone instead of pthread_create). | |
| Process IDs managed by linux-thread-db.c match those used by | |
| linux-nat.c: a common PID for all processes, an LWP ID for each | |
| thread, and no TID. We save the TID in private. Keeping it out | |
| of the ptid_t prevents thread IDs changing when libpthread is | |
| loaded or unloaded. */ | |
| /* If we're running on GNU/Linux, we must explicitly attach to any new | |
| threads. */ | |
| /* This module's target vector. */ | |
| static struct target_ops thread_db_ops; | |
| /* The target vector that we call for things this module can't handle. */ | |
| static struct target_ops *target_beneath; | |
| /* Non-zero if we're using this module's target vector. */ | |
| static int using_thread_db; | |
| /* Non-zero if we have determined the signals used by the threads | |
| library. */ | |
| static int thread_signals; | |
| static sigset_t thread_stop_set; | |
| static sigset_t thread_print_set; | |
| /* Structure that identifies the child process for the | |
| <proc_service.h> interface. */ | |
| static struct ps_prochandle proc_handle; | |
| /* Connection to the libthread_db library. */ | |
| static td_thragent_t *thread_agent; | |
| /* Pointers to the libthread_db functions. */ | |
| static td_err_e (*td_init_p) (void); | |
| static td_err_e (*td_ta_new_p) (struct ps_prochandle * ps, | |
| td_thragent_t **ta); | |
| static td_err_e (*td_ta_map_id2thr_p) (const td_thragent_t *ta, thread_t pt, | |
| td_thrhandle_t *__th); | |
| static td_err_e (*td_ta_map_lwp2thr_p) (const td_thragent_t *ta, | |
| lwpid_t lwpid, td_thrhandle_t *th); | |
| static td_err_e (*td_ta_thr_iter_p) (const td_thragent_t *ta, | |
| td_thr_iter_f *callback, void *cbdata_p, | |
| td_thr_state_e state, int ti_pri, | |
| sigset_t *ti_sigmask_p, | |
| unsigned int ti_user_flags); | |
| static td_err_e (*td_ta_event_addr_p) (const td_thragent_t *ta, | |
| td_event_e event, td_notify_t *ptr); | |
| static td_err_e (*td_ta_set_event_p) (const td_thragent_t *ta, | |
| td_thr_events_t *event); | |
| static td_err_e (*td_ta_event_getmsg_p) (const td_thragent_t *ta, | |
| td_event_msg_t *msg); | |
| static td_err_e (*td_thr_validate_p) (const td_thrhandle_t *th); | |
| static td_err_e (*td_thr_get_info_p) (const td_thrhandle_t *th, | |
| td_thrinfo_t *infop); | |
| static td_err_e (*td_thr_event_enable_p) (const td_thrhandle_t *th, | |
| int event); | |
| static td_err_e (*td_thr_tls_get_addr_p) (const td_thrhandle_t *th, | |
| void *map_address, | |
| size_t offset, void **address); | |
| /* Location of the thread creation event breakpoint. The code at this | |
| location in the child process will be called by the pthread library | |
| whenever a new thread is created. By setting a special breakpoint | |
| at this location, GDB can detect when a new thread is created. We | |
| obtain this location via the td_ta_event_addr call. */ | |
| static CORE_ADDR td_create_bp_addr; | |
| /* Location of the thread death event breakpoint. */ | |
| static CORE_ADDR td_death_bp_addr; | |
| /* Prototypes for local functions. */ | |
| static void thread_db_find_new_threads (void); | |
| static void attach_thread (ptid_t ptid, const td_thrhandle_t *th_p, | |
| const td_thrinfo_t *ti_p); | |
| static void detach_thread (ptid_t ptid); | |
| /* Use "struct private_thread_info" to cache thread state. This is | |
| a substantial optimization. */ | |
| struct private_thread_info | |
| { | |
| /* Flag set when we see a TD_DEATH event for this thread. */ | |
| unsigned int dying:1; | |
| /* Cached thread state. */ | |
| td_thrhandle_t th; | |
| thread_t tid; | |
| }; | |
| static char * | |
| thread_db_err_str (td_err_e err) | |
| { | |
| static char buf[64]; | |
| switch (err) | |
| { | |
| case TD_OK: | |
| return "generic 'call succeeded'"; | |
| case TD_ERR: | |
| return "generic error"; | |
| case TD_NOTHR: | |
| return "no thread to satisfy query"; | |
| case TD_NOSV: | |
| return "no sync handle to satisfy query"; | |
| case TD_NOLWP: | |
| return "no LWP to satisfy query"; | |
| case TD_BADPH: | |
| return "invalid process handle"; | |
| case TD_BADTH: | |
| return "invalid thread handle"; | |
| case TD_BADSH: | |
| return "invalid synchronization handle"; | |
| case TD_BADTA: | |
| return "invalid thread agent"; | |
| case TD_BADKEY: | |
| return "invalid key"; | |
| case TD_NOMSG: | |
| return "no event message for getmsg"; | |
| case TD_NOFPREGS: | |
| return "FPU register set not available"; | |
| case TD_NOLIBTHREAD: | |
| return "application not linked with libthread"; | |
| case TD_NOEVENT: | |
| return "requested event is not supported"; | |
| case TD_NOCAPAB: | |
| return "capability not available"; | |
| case TD_DBERR: | |
| return "debugger service failed"; | |
| case TD_NOAPLIC: | |
| return "operation not applicable to"; | |
| case TD_NOTSD: | |
| return "no thread-specific data for this thread"; | |
| case TD_MALLOC: | |
| return "malloc failed"; | |
| case TD_PARTIALREG: | |
| return "only part of register set was written/read"; | |
| case TD_NOXREGS: | |
| return "X register set not available for this thread"; | |
| #ifdef THREAD_DB_HAS_TD_NOTALLOC | |
| case TD_NOTALLOC: | |
| return "thread has not yet allocated TLS for given module"; | |
| #endif | |
| #ifdef THREAD_DB_HAS_TD_VERSION | |
| case TD_VERSION: | |
| return "versions of libpthread and libthread_db do not match"; | |
| #endif | |
| #ifdef THREAD_DB_HAS_TD_NOTLS | |
| case TD_NOTLS: | |
| return "there is no TLS segment in the given module"; | |
| #endif | |
| default: | |
| snprintf (buf, sizeof (buf), "unknown thread_db error '%d'", err); | |
| return buf; | |
| } | |
| } | |
| /* Return 1 if any threads have been registered. There may be none if | |
| the threading library is not fully initialized yet. */ | |
| static int | |
| have_threads_callback (struct thread_info *thread, void *dummy) | |
| { | |
| return thread->private != NULL; | |
| } | |
| static int | |
| have_threads (void) | |
| { | |
| return iterate_over_threads (have_threads_callback, NULL) != NULL; | |
| } | |
| /* A callback function for td_ta_thr_iter, which we use to map all | |
| threads to LWPs. | |
| THP is a handle to the current thread; if INFOP is not NULL, the | |
| struct thread_info associated with this thread is returned in | |
| *INFOP. | |
| If the thread is a zombie, TD_THR_ZOMBIE is returned. Otherwise, | |
| zero is returned to indicate success. */ | |
| static int | |
| thread_get_info_callback (const td_thrhandle_t *thp, void *infop) | |
| { | |
| td_thrinfo_t ti; | |
| td_err_e err; | |
| struct thread_info *thread_info; | |
| ptid_t thread_ptid; | |
| err = td_thr_get_info_p (thp, &ti); | |
| if (err != TD_OK) | |
| error (_("thread_get_info_callback: cannot get thread info: %s"), | |
| thread_db_err_str (err)); | |
| /* Fill the cache. */ | |
| thread_ptid = ptid_build (GET_PID (inferior_ptid), ti.ti_lid, 0); | |
| thread_info = find_thread_pid (thread_ptid); | |
| /* In the case of a zombie thread, don't continue. We don't want to | |
| attach to it thinking it is a new thread. */ | |
| if (ti.ti_state == TD_THR_UNKNOWN || ti.ti_state == TD_THR_ZOMBIE) | |
| { | |
| if (infop != NULL) | |
| *(struct thread_info **) infop = thread_info; | |
| return TD_THR_ZOMBIE; | |
| } | |
| if (thread_info == NULL) | |
| { | |
| /* New thread. Attach to it now (why wait?). */ | |
| if (!have_threads ()) | |
| thread_db_find_new_threads (); | |
| else | |
| attach_thread (thread_ptid, thp, &ti); | |
| thread_info = find_thread_pid (thread_ptid); | |
| gdb_assert (thread_info != NULL); | |
| } | |
| if (infop != NULL) | |
| *(struct thread_info **) infop = thread_info; | |
| return 0; | |
| } | |
| /* Convert between user-level thread ids and LWP ids. */ | |
| static ptid_t | |
| thread_from_lwp (ptid_t ptid) | |
| { | |
| td_thrhandle_t th; | |
| td_err_e err; | |
| struct thread_info *thread_info; | |
| ptid_t thread_ptid; | |
| /* This ptid comes from linux-nat.c, which should always fill in the | |
| LWP. */ | |
| gdb_assert (GET_LWP (ptid) != 0); | |
| /* Access an lwp we know is stopped. */ | |
| proc_handle.pid = GET_LWP (ptid); | |
| err = td_ta_map_lwp2thr_p (thread_agent, GET_LWP (ptid), &th); | |
| if (err != TD_OK) | |
| error (_("Cannot find user-level thread for LWP %ld: %s"), | |
| GET_LWP (ptid), thread_db_err_str (err)); | |
| thread_info = NULL; | |
| /* Fetch the thread info. If we get back TD_THR_ZOMBIE, then the | |
| event thread has already died. If another gdb interface has called | |
| thread_alive() previously, the thread won't be found on the thread list | |
| anymore. In that case, we don't want to process this ptid anymore | |
| to avoid the possibility of later treating it as a newly | |
| discovered thread id that we should add to the list. Thus, | |
| we return a -1 ptid which is also how the thread list marks a | |
| dead thread. */ | |
| if (thread_get_info_callback (&th, &thread_info) == TD_THR_ZOMBIE | |
| && thread_info == NULL) | |
| return pid_to_ptid (-1); | |
| gdb_assert (ptid_get_tid (ptid) == 0); | |
| return ptid; | |
| } | |
| /* Attach to lwp PTID, doing whatever else is required to have this | |
| LWP under the debugger's control --- e.g., enabling event | |
| reporting. Returns true on success. */ | |
| int | |
| thread_db_attach_lwp (ptid_t ptid) | |
| { | |
| td_thrhandle_t th; | |
| td_thrinfo_t ti; | |
| td_err_e err; | |
| if (!using_thread_db) | |
| return 0; | |
| /* This ptid comes from linux-nat.c, which should always fill in the | |
| LWP. */ | |
| gdb_assert (GET_LWP (ptid) != 0); | |
| /* Access an lwp we know is stopped. */ | |
| proc_handle.pid = GET_LWP (ptid); | |
| /* If we have only looked at the first thread before libpthread was | |
| initialized, we may not know its thread ID yet. Make sure we do | |
| before we add another thread to the list. */ | |
| if (!have_threads ()) | |
| thread_db_find_new_threads (); | |
| err = td_ta_map_lwp2thr_p (thread_agent, GET_LWP (ptid), &th); | |
| if (err != TD_OK) | |
| /* Cannot find user-level thread. */ | |
| return 0; | |
| err = td_thr_get_info_p (&th, &ti); | |
| if (err != TD_OK) | |
| { | |
| warning (_("Cannot get thread info: %s"), thread_db_err_str (err)); | |
| return 0; | |
| } | |
| attach_thread (ptid, &th, &ti); | |
| return 1; | |
| } | |
| void | |
| thread_db_init (struct target_ops *target) | |
| { | |
| target_beneath = target; | |
| } | |
| static void * | |
| verbose_dlsym (void *handle, const char *name) | |
| { | |
| void *sym = dlsym (handle, name); | |
| if (sym == NULL) | |
| warning (_("Symbol \"%s\" not found in libthread_db: %s"), name, dlerror ()); | |
| return sym; | |
| } | |
| static int | |
| thread_db_load (void) | |
| { | |
| void *handle; | |
| td_err_e err; | |
| handle = dlopen (LIBTHREAD_DB_SO, RTLD_NOW); | |
| if (handle == NULL) | |
| { | |
| fprintf_filtered (gdb_stderr, "\n\ndlopen failed on '%s' - %s\n", | |
| LIBTHREAD_DB_SO, dlerror ()); | |
| fprintf_filtered (gdb_stderr, | |
| "GDB will not be able to debug pthreads.\n\n"); | |
| return 0; | |
| } | |
| /* Initialize pointers to the dynamic library functions we will use. | |
| Essential functions first. */ | |
| td_init_p = verbose_dlsym (handle, "td_init"); | |
| if (td_init_p == NULL) | |
| return 0; | |
| td_ta_new_p = verbose_dlsym (handle, "td_ta_new"); | |
| if (td_ta_new_p == NULL) | |
| return 0; | |
| td_ta_map_id2thr_p = verbose_dlsym (handle, "td_ta_map_id2thr"); | |
| if (td_ta_map_id2thr_p == NULL) | |
| return 0; | |
| td_ta_map_lwp2thr_p = verbose_dlsym (handle, "td_ta_map_lwp2thr"); | |
| if (td_ta_map_lwp2thr_p == NULL) | |
| return 0; | |
| td_ta_thr_iter_p = verbose_dlsym (handle, "td_ta_thr_iter"); | |
| if (td_ta_thr_iter_p == NULL) | |
| return 0; | |
| td_thr_validate_p = verbose_dlsym (handle, "td_thr_validate"); | |
| if (td_thr_validate_p == NULL) | |
| return 0; | |
| td_thr_get_info_p = verbose_dlsym (handle, "td_thr_get_info"); | |
| if (td_thr_get_info_p == NULL) | |
| return 0; | |
| /* Initialize the library. */ | |
| err = td_init_p (); | |
| if (err != TD_OK) | |
| { | |
| warning (_("Cannot initialize libthread_db: %s"), thread_db_err_str (err)); | |
| return 0; | |
| } | |
| /* These are not essential. */ | |
| td_ta_event_addr_p = dlsym (handle, "td_ta_event_addr"); | |
| td_ta_set_event_p = dlsym (handle, "td_ta_set_event"); | |
| td_ta_event_getmsg_p = dlsym (handle, "td_ta_event_getmsg"); | |
| td_thr_event_enable_p = dlsym (handle, "td_thr_event_enable"); | |
| td_thr_tls_get_addr_p = dlsym (handle, "td_thr_tls_get_addr"); | |
| return 1; | |
| } | |
| static td_err_e | |
| enable_thread_event (td_thragent_t *thread_agent, int event, CORE_ADDR *bp) | |
| { | |
| td_notify_t notify; | |
| td_err_e err; | |
| /* Access an lwp we know is stopped. */ | |
| proc_handle.pid = GET_LWP (inferior_ptid); | |
| /* Get the breakpoint address for thread EVENT. */ | |
| err = td_ta_event_addr_p (thread_agent, event, ¬ify); | |
| if (err != TD_OK) | |
| return err; | |
| /* Set up the breakpoint. */ | |
| gdb_assert (exec_bfd); | |
| (*bp) = (gdbarch_convert_from_func_ptr_addr | |
| (current_gdbarch, | |
| /* Do proper sign extension for the target. */ | |
| (bfd_get_sign_extend_vma (exec_bfd) > 0 | |
| ? (CORE_ADDR) (intptr_t) notify.u.bptaddr | |
| : (CORE_ADDR) (uintptr_t) notify.u.bptaddr), | |
| ¤t_target)); | |
| create_thread_event_breakpoint ((*bp)); | |
| return TD_OK; | |
| } | |
| static void | |
| enable_thread_event_reporting (void) | |
| { | |
| td_thr_events_t events; | |
| td_notify_t notify; | |
| td_err_e err; | |
| #ifdef HAVE_GNU_LIBC_VERSION_H | |
| const char *libc_version; | |
| int libc_major, libc_minor; | |
| #endif | |
| /* We cannot use the thread event reporting facility if these | |
| functions aren't available. */ | |
| if (td_ta_event_addr_p == NULL || td_ta_set_event_p == NULL | |
| || td_ta_event_getmsg_p == NULL || td_thr_event_enable_p == NULL) | |
| return; | |
| /* Set the process wide mask saying which events we're interested in. */ | |
| td_event_emptyset (&events); | |
| td_event_addset (&events, TD_CREATE); | |
| #ifdef HAVE_GNU_LIBC_VERSION_H | |
| /* The event reporting facility is broken for TD_DEATH events in | |
| glibc 2.1.3, so don't enable it if we have glibc but a lower | |
| version. */ | |
| libc_version = gnu_get_libc_version (); | |
| if (sscanf (libc_version, "%d.%d", &libc_major, &libc_minor) == 2 | |
| && (libc_major > 2 || (libc_major == 2 && libc_minor > 1))) | |
| #endif | |
| td_event_addset (&events, TD_DEATH); | |
| err = td_ta_set_event_p (thread_agent, &events); | |
| if (err != TD_OK) | |
| { | |
| warning (_("Unable to set global thread event mask: %s"), | |
| thread_db_err_str (err)); | |
| return; | |
| } | |
| /* Delete previous thread event breakpoints, if any. */ | |
| remove_thread_event_breakpoints (); | |
| td_create_bp_addr = 0; | |
| td_death_bp_addr = 0; | |
| /* Set up the thread creation event. */ | |
| err = enable_thread_event (thread_agent, TD_CREATE, &td_create_bp_addr); | |
| if (err != TD_OK) | |
| { | |
| warning (_("Unable to get location for thread creation breakpoint: %s"), | |
| thread_db_err_str (err)); | |
| return; | |
| } | |
| /* Set up the thread death event. */ | |
| err = enable_thread_event (thread_agent, TD_DEATH, &td_death_bp_addr); | |
| if (err != TD_OK) | |
| { | |
| warning (_("Unable to get location for thread death breakpoint: %s"), | |
| thread_db_err_str (err)); | |
| return; | |
| } | |
| } | |
| static void | |
| disable_thread_event_reporting (void) | |
| { | |
| td_thr_events_t events; | |
| /* Set the process wide mask saying we aren't interested in any | |
| events anymore. */ | |
| td_event_emptyset (&events); | |
| td_ta_set_event_p (thread_agent, &events); | |
| /* Delete thread event breakpoints, if any. */ | |
| remove_thread_event_breakpoints (); | |
| td_create_bp_addr = 0; | |
| td_death_bp_addr = 0; | |
| } | |
| static void | |
| check_thread_signals (void) | |
| { | |
| #ifdef GET_THREAD_SIGNALS | |
| if (!thread_signals) | |
| { | |
| sigset_t mask; | |
| int i; | |
| GET_THREAD_SIGNALS (&mask); | |
| sigemptyset (&thread_stop_set); | |
| sigemptyset (&thread_print_set); | |
| for (i = 1; i < NSIG; i++) | |
| { | |
| if (sigismember (&mask, i)) | |
| { | |
| if (signal_stop_update (target_signal_from_host (i), 0)) | |
| sigaddset (&thread_stop_set, i); | |
| if (signal_print_update (target_signal_from_host (i), 0)) | |
| sigaddset (&thread_print_set, i); | |
| thread_signals = 1; | |
| } | |
| } | |
| } | |
| #endif | |
| } | |
| /* Check whether thread_db is usable. This function is called when | |
| an inferior is created (or otherwise acquired, e.g. attached to) | |
| and when new shared libraries are loaded into a running process. */ | |
| void | |
| check_for_thread_db (void) | |
| { | |
| td_err_e err; | |
| static int already_loaded; | |
| /* Do nothing if we couldn't load libthread_db.so.1. */ | |
| if (td_ta_new_p == NULL) | |
| return; | |
| /* First time through, report that libthread_db was successfuly | |
| loaded. Can't print this in in thread_db_load as, at that stage, | |
| the interpreter and it's console haven't started. */ | |
| if (!already_loaded) | |
| { | |
| Dl_info info; | |
| const char *library = NULL; | |
| if (dladdr ((*td_ta_new_p), &info) != 0) | |
| library = info.dli_fname; | |
| /* Try dlinfo? */ | |
| if (library == NULL) | |
| /* Paranoid - don't let a NULL path slip through. */ | |
| library = LIBTHREAD_DB_SO; | |
| if (info_verbose) | |
| printf_unfiltered (_("Using host libthread_db library \"%s\".\n"), | |
| library); | |
| already_loaded = 1; | |
| } | |
| if (using_thread_db) | |
| /* Nothing to do. The thread library was already detected and the | |
| target vector was already activated. */ | |
| return; | |
| /* Don't attempt to use thread_db on targets which can not run | |
| (executables not running yet, core files) for now. */ | |
| if (!target_has_execution) | |
| return; | |
| /* Don't attempt to use thread_db for remote targets. */ | |
| if (!target_can_run (¤t_target)) | |
| return; | |
| /* Initialize the structure that identifies the child process. */ | |
| proc_handle.pid = GET_PID (inferior_ptid); | |
| /* Now attempt to open a connection to the thread library. */ | |
| err = td_ta_new_p (&proc_handle, &thread_agent); | |
| switch (err) | |
| { | |
| case TD_NOLIBTHREAD: | |
| /* No thread library was detected. */ | |
| break; | |
| case TD_OK: | |
| printf_unfiltered (_("[Thread debugging using libthread_db enabled]\n")); | |
| /* The thread library was detected. Activate the thread_db target. */ | |
| push_target (&thread_db_ops); | |
| using_thread_db = 1; | |
| enable_thread_event_reporting (); | |
| thread_db_find_new_threads (); | |
| break; | |
| default: | |
| warning (_("Cannot initialize thread debugging library: %s"), | |
| thread_db_err_str (err)); | |
| break; | |
| } | |
| } | |
| static void | |
| thread_db_new_objfile (struct objfile *objfile) | |
| { | |
| if (objfile != NULL) | |
| check_for_thread_db (); | |
| } | |
| /* Attach to a new thread. This function is called when we receive a | |
| TD_CREATE event or when we iterate over all threads and find one | |
| that wasn't already in our list. */ | |
| static void | |
| attach_thread (ptid_t ptid, const td_thrhandle_t *th_p, | |
| const td_thrinfo_t *ti_p) | |
| { | |
| struct private_thread_info *private; | |
| struct thread_info *tp = NULL; | |
| td_err_e err; | |
| /* If we're being called after a TD_CREATE event, we may already | |
| know about this thread. There are two ways this can happen. We | |
| may have iterated over all threads between the thread creation | |
| and the TD_CREATE event, for instance when the user has issued | |
| the `info threads' command before the SIGTRAP for hitting the | |
| thread creation breakpoint was reported. Alternatively, the | |
| thread may have exited and a new one been created with the same | |
| thread ID. In the first case we don't need to do anything; in | |
| the second case we should discard information about the dead | |
| thread and attach to the new one. */ | |
| if (in_thread_list (ptid)) | |
| { | |
| tp = find_thread_pid (ptid); | |
| gdb_assert (tp != NULL); | |
| /* If tp->private is NULL, then GDB is already attached to this | |
| thread, but we do not know anything about it. We can learn | |
| about it here. This can only happen if we have some other | |
| way besides libthread_db to notice new threads (i.e. | |
| PTRACE_EVENT_CLONE); assume the same mechanism notices thread | |
| exit, so this can not be a stale thread recreated with the | |
| same ID. */ | |
| if (tp->private != NULL) | |
| { | |
| if (!tp->private->dying) | |
| return; | |
| delete_thread (ptid); | |
| tp = NULL; | |
| } | |
| } | |
| check_thread_signals (); | |
| if (ti_p->ti_state == TD_THR_UNKNOWN || ti_p->ti_state == TD_THR_ZOMBIE) | |
| return; /* A zombie thread -- do not attach. */ | |
| /* Under GNU/Linux, we have to attach to each and every thread. */ | |
| if (tp == NULL | |
| && lin_lwp_attach_lwp (BUILD_LWP (ti_p->ti_lid, GET_PID (ptid))) < 0) | |
| return; | |
| /* Construct the thread's private data. */ | |
| private = xmalloc (sizeof (struct private_thread_info)); | |
| memset (private, 0, sizeof (struct private_thread_info)); | |
| /* A thread ID of zero may mean the thread library has not initialized | |
| yet. But we shouldn't even get here if that's the case. FIXME: | |
| if we change GDB to always have at least one thread in the thread | |
| list this will have to go somewhere else; maybe private == NULL | |
| until the thread_db target claims it. */ | |
| gdb_assert (ti_p->ti_tid != 0); | |
| private->th = *th_p; | |
| private->tid = ti_p->ti_tid; | |
| /* Add the thread to GDB's thread list. */ | |
| if (tp == NULL) | |
| tp = add_thread_with_info (ptid, private); | |
| else | |
| tp->private = private; | |
| /* Enable thread event reporting for this thread. */ | |
| err = td_thr_event_enable_p (th_p, 1); | |
| if (err != TD_OK) | |
| error (_("Cannot enable thread event reporting for %s: %s"), | |
| target_pid_to_str (ptid), thread_db_err_str (err)); | |
| } | |
| static void | |
| detach_thread (ptid_t ptid) | |
| { | |
| struct thread_info *thread_info; | |
| /* Don't delete the thread now, because it still reports as active | |
| until it has executed a few instructions after the event | |
| breakpoint - if we deleted it now, "info threads" would cause us | |
| to re-attach to it. Just mark it as having had a TD_DEATH | |
| event. This means that we won't delete it from our thread list | |
| until we notice that it's dead (via prune_threads), or until | |
| something re-uses its thread ID. We'll report the thread exit | |
| when the underlying LWP dies. */ | |
| thread_info = find_thread_pid (ptid); | |
| gdb_assert (thread_info != NULL && thread_info->private != NULL); | |
| thread_info->private->dying = 1; | |
| } | |
| static void | |
| thread_db_detach (char *args, int from_tty) | |
| { | |
| disable_thread_event_reporting (); | |
| target_beneath->to_detach (args, from_tty); | |
| /* Should this be done by detach_command? */ | |
| target_mourn_inferior (); | |
| } | |
| /* Check if PID is currently stopped at the location of a thread event | |
| breakpoint location. If it is, read the event message and act upon | |
| the event. */ | |
| static void | |
| check_event (ptid_t ptid) | |
| { | |
| struct regcache *regcache = get_thread_regcache (ptid); | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| td_event_msg_t msg; | |
| td_thrinfo_t ti; | |
| td_err_e err; | |
| CORE_ADDR stop_pc; | |
| int loop = 0; | |
| /* Bail out early if we're not at a thread event breakpoint. */ | |
| stop_pc = regcache_read_pc (regcache) | |
| - gdbarch_decr_pc_after_break (gdbarch); | |
| if (stop_pc != td_create_bp_addr && stop_pc != td_death_bp_addr) | |
| return; | |
| /* Access an lwp we know is stopped. */ | |
| proc_handle.pid = GET_LWP (ptid); | |
| /* If we have only looked at the first thread before libpthread was | |
| initialized, we may not know its thread ID yet. Make sure we do | |
| before we add another thread to the list. */ | |
| if (!have_threads ()) | |
| thread_db_find_new_threads (); | |
| /* If we are at a create breakpoint, we do not know what new lwp | |
| was created and cannot specifically locate the event message for it. | |
| We have to call td_ta_event_getmsg() to get | |
| the latest message. Since we have no way of correlating whether | |
| the event message we get back corresponds to our breakpoint, we must | |
| loop and read all event messages, processing them appropriately. | |
| This guarantees we will process the correct message before continuing | |
| from the breakpoint. | |
| Currently, death events are not enabled. If they are enabled, | |
| the death event can use the td_thr_event_getmsg() interface to | |
| get the message specifically for that lwp and avoid looping | |
| below. */ | |
| loop = 1; | |
| do | |
| { | |
| err = td_ta_event_getmsg_p (thread_agent, &msg); | |
| if (err != TD_OK) | |
| { | |
| if (err == TD_NOMSG) | |
| return; | |
| error (_("Cannot get thread event message: %s"), | |
| thread_db_err_str (err)); | |
| } | |
| err = td_thr_get_info_p (msg.th_p, &ti); | |
| if (err != TD_OK) | |
| error (_("Cannot get thread info: %s"), thread_db_err_str (err)); | |
| ptid = ptid_build (GET_PID (ptid), ti.ti_lid, 0); | |
| switch (msg.event) | |
| { | |
| case TD_CREATE: | |
| /* Call attach_thread whether or not we already know about a | |
| thread with this thread ID. */ | |
| attach_thread (ptid, msg.th_p, &ti); | |
| break; | |
| case TD_DEATH: | |
| if (!in_thread_list (ptid)) | |
| error (_("Spurious thread death event.")); | |
| detach_thread (ptid); | |
| break; | |
| default: | |
| error (_("Spurious thread event.")); | |
| } | |
| } | |
| while (loop); | |
| } | |
| static ptid_t | |
| thread_db_wait (ptid_t ptid, struct target_waitstatus *ourstatus) | |
| { | |
| ptid = target_beneath->to_wait (ptid, ourstatus); | |
| if (ourstatus->kind == TARGET_WAITKIND_IGNORE) | |
| return ptid; | |
| if (ourstatus->kind == TARGET_WAITKIND_EXITED | |
| || ourstatus->kind == TARGET_WAITKIND_SIGNALLED) | |
| return pid_to_ptid (-1); | |
| if (ourstatus->kind == TARGET_WAITKIND_EXECD) | |
| { | |
| remove_thread_event_breakpoints (); | |
| unpush_target (&thread_db_ops); | |
| using_thread_db = 0; | |
| return ptid; | |
| } | |
| /* If we do not know about the main thread yet, this would be a good time to | |
| find it. */ | |
| if (ourstatus->kind == TARGET_WAITKIND_STOPPED && !have_threads ()) | |
| thread_db_find_new_threads (); | |
| if (ourstatus->kind == TARGET_WAITKIND_STOPPED | |
| && ourstatus->value.sig == TARGET_SIGNAL_TRAP) | |
| /* Check for a thread event. */ | |
| check_event (ptid); | |
| if (have_threads ()) | |
| { | |
| /* Change ptids back into the higher level PID + TID format. If | |
| the thread is dead and no longer on the thread list, we will | |
| get back a dead ptid. This can occur if the thread death | |
| event gets postponed by other simultaneous events. In such a | |
| case, we want to just ignore the event and continue on. */ | |
| ptid = thread_from_lwp (ptid); | |
| if (GET_PID (ptid) == -1) | |
| ourstatus->kind = TARGET_WAITKIND_SPURIOUS; | |
| } | |
| return ptid; | |
| } | |
| static void | |
| thread_db_mourn_inferior (void) | |
| { | |
| /* Forget about the child's process ID. We shouldn't need it | |
| anymore. */ | |
| proc_handle.pid = 0; | |
| target_beneath->to_mourn_inferior (); | |
| /* Delete the old thread event breakpoints. Do this after mourning | |
| the inferior, so that we don't try to uninsert them. */ | |
| remove_thread_event_breakpoints (); | |
| /* Detach thread_db target ops. */ | |
| unpush_target (&thread_db_ops); | |
| using_thread_db = 0; | |
| } | |
| static int | |
| thread_db_can_async_p (void) | |
| { | |
| return target_beneath->to_can_async_p (); | |
| } | |
| static int | |
| thread_db_is_async_p (void) | |
| { | |
| return target_beneath->to_is_async_p (); | |
| } | |
| static void | |
| thread_db_async (void (*callback) (enum inferior_event_type event_type, | |
| void *context), void *context) | |
| { | |
| return target_beneath->to_async (callback, context); | |
| } | |
| static int | |
| thread_db_async_mask (int mask) | |
| { | |
| return target_beneath->to_async_mask (mask); | |
| } | |
| static int | |
| find_new_threads_callback (const td_thrhandle_t *th_p, void *data) | |
| { | |
| td_thrinfo_t ti; | |
| td_err_e err; | |
| ptid_t ptid; | |
| struct thread_info *tp; | |
| err = td_thr_get_info_p (th_p, &ti); | |
| if (err != TD_OK) | |
| error (_("find_new_threads_callback: cannot get thread info: %s"), | |
| thread_db_err_str (err)); | |
| if (ti.ti_state == TD_THR_UNKNOWN || ti.ti_state == TD_THR_ZOMBIE) | |
| return 0; /* A zombie -- ignore. */ | |
| ptid = ptid_build (GET_PID (inferior_ptid), ti.ti_lid, 0); | |
| if (ti.ti_tid == 0) | |
| { | |
| /* A thread ID of zero means that this is the main thread, but | |
| glibc has not yet initialized thread-local storage and the | |
| pthread library. We do not know what the thread's TID will | |
| be yet. Just enable event reporting and otherwise ignore | |
| it. */ | |
| err = td_thr_event_enable_p (th_p, 1); | |
| if (err != TD_OK) | |
| error (_("Cannot enable thread event reporting for %s: %s"), | |
| target_pid_to_str (ptid), thread_db_err_str (err)); | |
| return 0; | |
| } | |
| tp = find_thread_pid (ptid); | |
| if (tp == NULL || tp->private == NULL) | |
| attach_thread (ptid, th_p, &ti); | |
| return 0; | |
| } | |
| /* Search for new threads, accessing memory through stopped thread | |
| PTID. */ | |
| static void | |
| thread_db_find_new_threads (void) | |
| { | |
| td_err_e err; | |
| struct lwp_info *lp; | |
| ptid_t ptid; | |
| /* In linux, we can only read memory through a stopped lwp. */ | |
| ALL_LWPS (lp, ptid) | |
| if (lp->stopped) | |
| break; | |
| if (!lp) | |
| /* There is no stopped thread. Bail out. */ | |
| return; | |
| /* Access an lwp we know is stopped. */ | |
| proc_handle.pid = GET_LWP (ptid); | |
| /* Iterate over all user-space threads to discover new threads. */ | |
| err = td_ta_thr_iter_p (thread_agent, find_new_threads_callback, NULL, | |
| TD_THR_ANY_STATE, TD_THR_LOWEST_PRIORITY, | |
| TD_SIGNO_MASK, TD_THR_ANY_USER_FLAGS); | |
| if (err != TD_OK) | |
| error (_("Cannot find new threads: %s"), thread_db_err_str (err)); | |
| } | |
| static char * | |
| thread_db_pid_to_str (ptid_t ptid) | |
| { | |
| struct thread_info *thread_info = find_thread_pid (ptid); | |
| if (thread_info != NULL && thread_info->private != NULL) | |
| { | |
| static char buf[64]; | |
| thread_t tid; | |
| tid = thread_info->private->tid; | |
| thread_info = find_thread_pid (ptid); | |
| snprintf (buf, sizeof (buf), "Thread 0x%lx (LWP %ld)", | |
| tid, GET_LWP (ptid)); | |
| return buf; | |
| } | |
| if (target_beneath->to_pid_to_str (ptid)) | |
| return target_beneath->to_pid_to_str (ptid); | |
| return normal_pid_to_str (ptid); | |
| } | |
| /* Return a string describing the state of the thread specified by | |
| INFO. */ | |
| static char * | |
| thread_db_extra_thread_info (struct thread_info *info) | |
| { | |
| if (info->private == NULL) | |
| return NULL; | |
| if (info->private->dying) | |
| return "Exiting"; | |
| return NULL; | |
| } | |
| /* Get the address of the thread local variable in load module LM which | |
| is stored at OFFSET within the thread local storage for thread PTID. */ | |
| static CORE_ADDR | |
| thread_db_get_thread_local_address (ptid_t ptid, | |
| CORE_ADDR lm, | |
| CORE_ADDR offset) | |
| { | |
| struct thread_info *thread_info; | |
| /* If we have not discovered any threads yet, check now. */ | |
| if (!have_threads ()) | |
| thread_db_find_new_threads (); | |
| /* Find the matching thread. */ | |
| thread_info = find_thread_pid (ptid); | |
| if (thread_info != NULL && thread_info->private != NULL) | |
| { | |
| td_err_e err; | |
| void *address; | |
| /* glibc doesn't provide the needed interface. */ | |
| if (!td_thr_tls_get_addr_p) | |
| throw_error (TLS_NO_LIBRARY_SUPPORT_ERROR, | |
| _("No TLS library support")); | |
| /* Caller should have verified that lm != 0. */ | |
| gdb_assert (lm != 0); | |
| /* Finally, get the address of the variable. */ | |
| err = td_thr_tls_get_addr_p (&thread_info->private->th, | |
| (void *)(size_t) lm, | |
| offset, &address); | |
| #ifdef THREAD_DB_HAS_TD_NOTALLOC | |
| /* The memory hasn't been allocated, yet. */ | |
| if (err == TD_NOTALLOC) | |
| /* Now, if libthread_db provided the initialization image's | |
| address, we *could* try to build a non-lvalue value from | |
| the initialization image. */ | |
| throw_error (TLS_NOT_ALLOCATED_YET_ERROR, | |
| _("TLS not allocated yet")); | |
| #endif | |
| /* Something else went wrong. */ | |
| if (err != TD_OK) | |
| throw_error (TLS_GENERIC_ERROR, | |
| (("%s")), thread_db_err_str (err)); | |
| /* Cast assuming host == target. Joy. */ | |
| /* Do proper sign extension for the target. */ | |
| gdb_assert (exec_bfd); | |
| return (bfd_get_sign_extend_vma (exec_bfd) > 0 | |
| ? (CORE_ADDR) (intptr_t) address | |
| : (CORE_ADDR) (uintptr_t) address); | |
| } | |
| if (target_beneath->to_get_thread_local_address) | |
| return target_beneath->to_get_thread_local_address (ptid, lm, offset); | |
| else | |
| throw_error (TLS_GENERIC_ERROR, | |
| _("TLS not supported on this target")); | |
| } | |
| static void | |
| init_thread_db_ops (void) | |
| { | |
| thread_db_ops.to_shortname = "multi-thread"; | |
| thread_db_ops.to_longname = "multi-threaded child process."; | |
| thread_db_ops.to_doc = "Threads and pthreads support."; | |
| thread_db_ops.to_detach = thread_db_detach; | |
| thread_db_ops.to_wait = thread_db_wait; | |
| thread_db_ops.to_mourn_inferior = thread_db_mourn_inferior; | |
| thread_db_ops.to_find_new_threads = thread_db_find_new_threads; | |
| thread_db_ops.to_pid_to_str = thread_db_pid_to_str; | |
| thread_db_ops.to_stratum = thread_stratum; | |
| thread_db_ops.to_has_thread_control = tc_schedlock; | |
| thread_db_ops.to_get_thread_local_address | |
| = thread_db_get_thread_local_address; | |
| thread_db_ops.to_extra_thread_info = thread_db_extra_thread_info; | |
| thread_db_ops.to_can_async_p = thread_db_can_async_p; | |
| thread_db_ops.to_is_async_p = thread_db_is_async_p; | |
| thread_db_ops.to_async = thread_db_async; | |
| thread_db_ops.to_async_mask = thread_db_async_mask; | |
| thread_db_ops.to_magic = OPS_MAGIC; | |
| } | |
| void | |
| _initialize_thread_db (void) | |
| { | |
| /* Only initialize the module if we can load libthread_db. */ | |
| if (thread_db_load ()) | |
| { | |
| init_thread_db_ops (); | |
| add_target (&thread_db_ops); | |
| /* Add ourselves to objfile event chain. */ | |
| observer_attach_new_objfile (thread_db_new_objfile); | |
| } | |
| } |