| /* PPC GNU/Linux native support. | |
| Copyright (C) 1988-2019 Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "observable.h" | |
| #include "frame.h" | |
| #include "inferior.h" | |
| #include "gdbthread.h" | |
| #include "gdbcore.h" | |
| #include "regcache.h" | |
| #include "regset.h" | |
| #include "target.h" | |
| #include "linux-nat.h" | |
| #include <sys/types.h> | |
| #include <signal.h> | |
| #include <sys/user.h> | |
| #include <sys/ioctl.h> | |
| #include <sys/uio.h> | |
| #include "gdbsupport/gdb_wait.h" | |
| #include <fcntl.h> | |
| #include <sys/procfs.h> | |
| #include "nat/gdb_ptrace.h" | |
| #include "nat/linux-ptrace.h" | |
| #include "inf-ptrace.h" | |
| /* Prototypes for supply_gregset etc. */ | |
| #include "gregset.h" | |
| #include "ppc-tdep.h" | |
| #include "ppc-linux-tdep.h" | |
| /* Required when using the AUXV. */ | |
| #include "elf/common.h" | |
| #include "auxv.h" | |
| #include "arch/ppc-linux-common.h" | |
| #include "arch/ppc-linux-tdesc.h" | |
| #include "nat/ppc-linux.h" | |
| #include "linux-tdep.h" | |
| /* Similarly for the hardware watchpoint support. These requests are used | |
| when the PowerPC HWDEBUG ptrace interface is not available. */ | |
| #ifndef PTRACE_GET_DEBUGREG | |
| #define PTRACE_GET_DEBUGREG 25 | |
| #endif | |
| #ifndef PTRACE_SET_DEBUGREG | |
| #define PTRACE_SET_DEBUGREG 26 | |
| #endif | |
| #ifndef PTRACE_GETSIGINFO | |
| #define PTRACE_GETSIGINFO 0x4202 | |
| #endif | |
| /* These requests are used when the PowerPC HWDEBUG ptrace interface is | |
| available. It exposes the debug facilities of PowerPC processors, as well | |
| as additional features of BookE processors, such as ranged breakpoints and | |
| watchpoints and hardware-accelerated condition evaluation. */ | |
| #ifndef PPC_PTRACE_GETHWDBGINFO | |
| /* Not having PPC_PTRACE_GETHWDBGINFO defined means that the PowerPC HWDEBUG | |
| ptrace interface is not present in ptrace.h, so we'll have to pretty much | |
| include it all here so that the code at least compiles on older systems. */ | |
| #define PPC_PTRACE_GETHWDBGINFO 0x89 | |
| #define PPC_PTRACE_SETHWDEBUG 0x88 | |
| #define PPC_PTRACE_DELHWDEBUG 0x87 | |
| struct ppc_debug_info | |
| { | |
| uint32_t version; /* Only version 1 exists to date. */ | |
| uint32_t num_instruction_bps; | |
| uint32_t num_data_bps; | |
| uint32_t num_condition_regs; | |
| uint32_t data_bp_alignment; | |
| uint32_t sizeof_condition; /* size of the DVC register. */ | |
| uint64_t features; | |
| }; | |
| /* Features will have bits indicating whether there is support for: */ | |
| #define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1 | |
| #define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2 | |
| #define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4 | |
| #define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8 | |
| struct ppc_hw_breakpoint | |
| { | |
| uint32_t version; /* currently, version must be 1 */ | |
| uint32_t trigger_type; /* only some combinations allowed */ | |
| uint32_t addr_mode; /* address match mode */ | |
| uint32_t condition_mode; /* break/watchpoint condition flags */ | |
| uint64_t addr; /* break/watchpoint address */ | |
| uint64_t addr2; /* range end or mask */ | |
| uint64_t condition_value; /* contents of the DVC register */ | |
| }; | |
| /* Trigger type. */ | |
| #define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1 | |
| #define PPC_BREAKPOINT_TRIGGER_READ 0x2 | |
| #define PPC_BREAKPOINT_TRIGGER_WRITE 0x4 | |
| #define PPC_BREAKPOINT_TRIGGER_RW 0x6 | |
| /* Address mode. */ | |
| #define PPC_BREAKPOINT_MODE_EXACT 0x0 | |
| #define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1 | |
| #define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2 | |
| #define PPC_BREAKPOINT_MODE_MASK 0x3 | |
| /* Condition mode. */ | |
| #define PPC_BREAKPOINT_CONDITION_NONE 0x0 | |
| #define PPC_BREAKPOINT_CONDITION_AND 0x1 | |
| #define PPC_BREAKPOINT_CONDITION_EXACT 0x1 | |
| #define PPC_BREAKPOINT_CONDITION_OR 0x2 | |
| #define PPC_BREAKPOINT_CONDITION_AND_OR 0x3 | |
| #define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 | |
| #define PPC_BREAKPOINT_CONDITION_BE_SHIFT 16 | |
| #define PPC_BREAKPOINT_CONDITION_BE(n) \ | |
| (1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT)) | |
| #endif /* PPC_PTRACE_GETHWDBGINFO */ | |
| /* Feature defined on Linux kernel v3.9: DAWR interface, that enables wider | |
| watchpoint (up to 512 bytes). */ | |
| #ifndef PPC_DEBUG_FEATURE_DATA_BP_DAWR | |
| #define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x10 | |
| #endif /* PPC_DEBUG_FEATURE_DATA_BP_DAWR */ | |
| /* Similarly for the general-purpose (gp0 -- gp31) | |
| and floating-point registers (fp0 -- fp31). */ | |
| #ifndef PTRACE_GETREGS | |
| #define PTRACE_GETREGS 12 | |
| #endif | |
| #ifndef PTRACE_SETREGS | |
| #define PTRACE_SETREGS 13 | |
| #endif | |
| #ifndef PTRACE_GETFPREGS | |
| #define PTRACE_GETFPREGS 14 | |
| #endif | |
| #ifndef PTRACE_SETFPREGS | |
| #define PTRACE_SETFPREGS 15 | |
| #endif | |
| /* This oddity is because the Linux kernel defines elf_vrregset_t as | |
| an array of 33 16 bytes long elements. I.e. it leaves out vrsave. | |
| However the PTRACE_GETVRREGS and PTRACE_SETVRREGS requests return | |
| the vrsave as an extra 4 bytes at the end. I opted for creating a | |
| flat array of chars, so that it is easier to manipulate for gdb. | |
| There are 32 vector registers 16 bytes longs, plus a VSCR register | |
| which is only 4 bytes long, but is fetched as a 16 bytes | |
| quantity. Up to here we have the elf_vrregset_t structure. | |
| Appended to this there is space for the VRSAVE register: 4 bytes. | |
| Even though this vrsave register is not included in the regset | |
| typedef, it is handled by the ptrace requests. | |
| The layout is like this (where x is the actual value of the vscr reg): */ | |
| /* *INDENT-OFF* */ | |
| /* | |
| Big-Endian: | |
| |.|.|.|.|.....|.|.|.|.||.|.|.|x||.| | |
| <-------> <-------><-------><-> | |
| VR0 VR31 VSCR VRSAVE | |
| Little-Endian: | |
| |.|.|.|.|.....|.|.|.|.||X|.|.|.||.| | |
| <-------> <-------><-------><-> | |
| VR0 VR31 VSCR VRSAVE | |
| */ | |
| /* *INDENT-ON* */ | |
| typedef char gdb_vrregset_t[PPC_LINUX_SIZEOF_VRREGSET]; | |
| /* This is the layout of the POWER7 VSX registers and the way they overlap | |
| with the existing FPR and VMX registers. | |
| VSR doubleword 0 VSR doubleword 1 | |
| ---------------------------------------------------------------- | |
| VSR[0] | FPR[0] | | | |
| ---------------------------------------------------------------- | |
| VSR[1] | FPR[1] | | | |
| ---------------------------------------------------------------- | |
| | ... | | | |
| | ... | | | |
| ---------------------------------------------------------------- | |
| VSR[30] | FPR[30] | | | |
| ---------------------------------------------------------------- | |
| VSR[31] | FPR[31] | | | |
| ---------------------------------------------------------------- | |
| VSR[32] | VR[0] | | |
| ---------------------------------------------------------------- | |
| VSR[33] | VR[1] | | |
| ---------------------------------------------------------------- | |
| | ... | | |
| | ... | | |
| ---------------------------------------------------------------- | |
| VSR[62] | VR[30] | | |
| ---------------------------------------------------------------- | |
| VSR[63] | VR[31] | | |
| ---------------------------------------------------------------- | |
| VSX has 64 128bit registers. The first 32 registers overlap with | |
| the FP registers (doubleword 0) and hence extend them with additional | |
| 64 bits (doubleword 1). The other 32 regs overlap with the VMX | |
| registers. */ | |
| typedef char gdb_vsxregset_t[PPC_LINUX_SIZEOF_VSXREGSET]; | |
| /* On PPC processors that support the Signal Processing Extension | |
| (SPE) APU, the general-purpose registers are 64 bits long. | |
| However, the ordinary Linux kernel PTRACE_PEEKUSER / PTRACE_POKEUSER | |
| ptrace calls only access the lower half of each register, to allow | |
| them to behave the same way they do on non-SPE systems. There's a | |
| separate pair of calls, PTRACE_GETEVRREGS / PTRACE_SETEVRREGS, that | |
| read and write the top halves of all the general-purpose registers | |
| at once, along with some SPE-specific registers. | |
| GDB itself continues to claim the general-purpose registers are 32 | |
| bits long. It has unnamed raw registers that hold the upper halves | |
| of the gprs, and the full 64-bit SIMD views of the registers, | |
| 'ev0' -- 'ev31', are pseudo-registers that splice the top and | |
| bottom halves together. | |
| This is the structure filled in by PTRACE_GETEVRREGS and written to | |
| the inferior's registers by PTRACE_SETEVRREGS. */ | |
| struct gdb_evrregset_t | |
| { | |
| unsigned long evr[32]; | |
| unsigned long long acc; | |
| unsigned long spefscr; | |
| }; | |
| /* Non-zero if our kernel may support the PTRACE_GETVSXREGS and | |
| PTRACE_SETVSXREGS requests, for reading and writing the VSX | |
| POWER7 registers 0 through 31. Zero if we've tried one of them and | |
| gotten an error. Note that VSX registers 32 through 63 overlap | |
| with VR registers 0 through 31. */ | |
| int have_ptrace_getsetvsxregs = 1; | |
| /* Non-zero if our kernel may support the PTRACE_GETVRREGS and | |
| PTRACE_SETVRREGS requests, for reading and writing the Altivec | |
| registers. Zero if we've tried one of them and gotten an | |
| error. */ | |
| int have_ptrace_getvrregs = 1; | |
| /* Non-zero if our kernel may support the PTRACE_GETEVRREGS and | |
| PTRACE_SETEVRREGS requests, for reading and writing the SPE | |
| registers. Zero if we've tried one of them and gotten an | |
| error. */ | |
| int have_ptrace_getsetevrregs = 1; | |
| /* Non-zero if our kernel may support the PTRACE_GETREGS and | |
| PTRACE_SETREGS requests, for reading and writing the | |
| general-purpose registers. Zero if we've tried one of | |
| them and gotten an error. */ | |
| int have_ptrace_getsetregs = 1; | |
| /* Non-zero if our kernel may support the PTRACE_GETFPREGS and | |
| PTRACE_SETFPREGS requests, for reading and writing the | |
| floating-pointers registers. Zero if we've tried one of | |
| them and gotten an error. */ | |
| int have_ptrace_getsetfpregs = 1; | |
| struct ppc_linux_nat_target final : public linux_nat_target | |
| { | |
| /* Add our register access methods. */ | |
| void fetch_registers (struct regcache *, int) override; | |
| void store_registers (struct regcache *, int) override; | |
| /* Add our breakpoint/watchpoint methods. */ | |
| int can_use_hw_breakpoint (enum bptype, int, int) override; | |
| int insert_hw_breakpoint (struct gdbarch *, struct bp_target_info *) | |
| override; | |
| int remove_hw_breakpoint (struct gdbarch *, struct bp_target_info *) | |
| override; | |
| int region_ok_for_hw_watchpoint (CORE_ADDR, int) override; | |
| int insert_watchpoint (CORE_ADDR, int, enum target_hw_bp_type, | |
| struct expression *) override; | |
| int remove_watchpoint (CORE_ADDR, int, enum target_hw_bp_type, | |
| struct expression *) override; | |
| int insert_mask_watchpoint (CORE_ADDR, CORE_ADDR, enum target_hw_bp_type) | |
| override; | |
| int remove_mask_watchpoint (CORE_ADDR, CORE_ADDR, enum target_hw_bp_type) | |
| override; | |
| bool stopped_by_watchpoint () override; | |
| bool stopped_data_address (CORE_ADDR *) override; | |
| bool watchpoint_addr_within_range (CORE_ADDR, CORE_ADDR, int) override; | |
| bool can_accel_watchpoint_condition (CORE_ADDR, int, int, struct expression *) | |
| override; | |
| int masked_watch_num_registers (CORE_ADDR, CORE_ADDR) override; | |
| int ranged_break_num_registers () override; | |
| const struct target_desc *read_description () override; | |
| int auxv_parse (gdb_byte **readptr, | |
| gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp) | |
| override; | |
| /* Override linux_nat_target low methods. */ | |
| void low_new_thread (struct lwp_info *lp) override; | |
| }; | |
| static ppc_linux_nat_target the_ppc_linux_nat_target; | |
| /* *INDENT-OFF* */ | |
| /* registers layout, as presented by the ptrace interface: | |
| PT_R0, PT_R1, PT_R2, PT_R3, PT_R4, PT_R5, PT_R6, PT_R7, | |
| PT_R8, PT_R9, PT_R10, PT_R11, PT_R12, PT_R13, PT_R14, PT_R15, | |
| PT_R16, PT_R17, PT_R18, PT_R19, PT_R20, PT_R21, PT_R22, PT_R23, | |
| PT_R24, PT_R25, PT_R26, PT_R27, PT_R28, PT_R29, PT_R30, PT_R31, | |
| PT_FPR0, PT_FPR0 + 2, PT_FPR0 + 4, PT_FPR0 + 6, | |
| PT_FPR0 + 8, PT_FPR0 + 10, PT_FPR0 + 12, PT_FPR0 + 14, | |
| PT_FPR0 + 16, PT_FPR0 + 18, PT_FPR0 + 20, PT_FPR0 + 22, | |
| PT_FPR0 + 24, PT_FPR0 + 26, PT_FPR0 + 28, PT_FPR0 + 30, | |
| PT_FPR0 + 32, PT_FPR0 + 34, PT_FPR0 + 36, PT_FPR0 + 38, | |
| PT_FPR0 + 40, PT_FPR0 + 42, PT_FPR0 + 44, PT_FPR0 + 46, | |
| PT_FPR0 + 48, PT_FPR0 + 50, PT_FPR0 + 52, PT_FPR0 + 54, | |
| PT_FPR0 + 56, PT_FPR0 + 58, PT_FPR0 + 60, PT_FPR0 + 62, | |
| PT_NIP, PT_MSR, PT_CCR, PT_LNK, PT_CTR, PT_XER, PT_MQ */ | |
| /* *INDENT_ON * */ | |
| static int | |
| ppc_register_u_addr (struct gdbarch *gdbarch, int regno) | |
| { | |
| int u_addr = -1; | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| /* NOTE: cagney/2003-11-25: This is the word size used by the ptrace | |
| interface, and not the wordsize of the program's ABI. */ | |
| int wordsize = sizeof (long); | |
| /* General purpose registers occupy 1 slot each in the buffer. */ | |
| if (regno >= tdep->ppc_gp0_regnum | |
| && regno < tdep->ppc_gp0_regnum + ppc_num_gprs) | |
| u_addr = ((regno - tdep->ppc_gp0_regnum + PT_R0) * wordsize); | |
| /* Floating point regs: eight bytes each in both 32- and 64-bit | |
| ptrace interfaces. Thus, two slots each in 32-bit interface, one | |
| slot each in 64-bit interface. */ | |
| if (tdep->ppc_fp0_regnum >= 0 | |
| && regno >= tdep->ppc_fp0_regnum | |
| && regno < tdep->ppc_fp0_regnum + ppc_num_fprs) | |
| u_addr = (PT_FPR0 * wordsize) + ((regno - tdep->ppc_fp0_regnum) * 8); | |
| /* UISA special purpose registers: 1 slot each. */ | |
| if (regno == gdbarch_pc_regnum (gdbarch)) | |
| u_addr = PT_NIP * wordsize; | |
| if (regno == tdep->ppc_lr_regnum) | |
| u_addr = PT_LNK * wordsize; | |
| if (regno == tdep->ppc_cr_regnum) | |
| u_addr = PT_CCR * wordsize; | |
| if (regno == tdep->ppc_xer_regnum) | |
| u_addr = PT_XER * wordsize; | |
| if (regno == tdep->ppc_ctr_regnum) | |
| u_addr = PT_CTR * wordsize; | |
| #ifdef PT_MQ | |
| if (regno == tdep->ppc_mq_regnum) | |
| u_addr = PT_MQ * wordsize; | |
| #endif | |
| if (regno == tdep->ppc_ps_regnum) | |
| u_addr = PT_MSR * wordsize; | |
| if (regno == PPC_ORIG_R3_REGNUM) | |
| u_addr = PT_ORIG_R3 * wordsize; | |
| if (regno == PPC_TRAP_REGNUM) | |
| u_addr = PT_TRAP * wordsize; | |
| if (tdep->ppc_fpscr_regnum >= 0 | |
| && regno == tdep->ppc_fpscr_regnum) | |
| { | |
| /* NOTE: cagney/2005-02-08: On some 64-bit GNU/Linux systems the | |
| kernel headers incorrectly contained the 32-bit definition of | |
| PT_FPSCR. For the 32-bit definition, floating-point | |
| registers occupy two 32-bit "slots", and the FPSCR lives in | |
| the second half of such a slot-pair (hence +1). For 64-bit, | |
| the FPSCR instead occupies the full 64-bit 2-word-slot and | |
| hence no adjustment is necessary. Hack around this. */ | |
| if (wordsize == 8 && PT_FPSCR == (48 + 32 + 1)) | |
| u_addr = (48 + 32) * wordsize; | |
| /* If the FPSCR is 64-bit wide, we need to fetch the whole 64-bit | |
| slot and not just its second word. The PT_FPSCR supplied when | |
| GDB is compiled as a 32-bit app doesn't reflect this. */ | |
| else if (wordsize == 4 && register_size (gdbarch, regno) == 8 | |
| && PT_FPSCR == (48 + 2*32 + 1)) | |
| u_addr = (48 + 2*32) * wordsize; | |
| else | |
| u_addr = PT_FPSCR * wordsize; | |
| } | |
| return u_addr; | |
| } | |
| /* The Linux kernel ptrace interface for POWER7 VSX registers uses the | |
| registers set mechanism, as opposed to the interface for all the | |
| other registers, that stores/fetches each register individually. */ | |
| static void | |
| fetch_vsx_registers (struct regcache *regcache, int tid, int regno) | |
| { | |
| int ret; | |
| gdb_vsxregset_t regs; | |
| const struct regset *vsxregset = ppc_linux_vsxregset (); | |
| ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s); | |
| if (ret < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetvsxregs = 0; | |
| return; | |
| } | |
| perror_with_name (_("Unable to fetch VSX registers")); | |
| } | |
| vsxregset->supply_regset (vsxregset, regcache, regno, ®s, | |
| PPC_LINUX_SIZEOF_VSXREGSET); | |
| } | |
| /* The Linux kernel ptrace interface for AltiVec registers uses the | |
| registers set mechanism, as opposed to the interface for all the | |
| other registers, that stores/fetches each register individually. */ | |
| static void | |
| fetch_altivec_registers (struct regcache *regcache, int tid, | |
| int regno) | |
| { | |
| int ret; | |
| gdb_vrregset_t regs; | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| const struct regset *vrregset = ppc_linux_vrregset (gdbarch); | |
| ret = ptrace (PTRACE_GETVRREGS, tid, 0, ®s); | |
| if (ret < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getvrregs = 0; | |
| return; | |
| } | |
| perror_with_name (_("Unable to fetch AltiVec registers")); | |
| } | |
| vrregset->supply_regset (vrregset, regcache, regno, ®s, | |
| PPC_LINUX_SIZEOF_VRREGSET); | |
| } | |
| /* Fetch the top 32 bits of TID's general-purpose registers and the | |
| SPE-specific registers, and place the results in EVRREGSET. If we | |
| don't support PTRACE_GETEVRREGS, then just fill EVRREGSET with | |
| zeros. | |
| All the logic to deal with whether or not the PTRACE_GETEVRREGS and | |
| PTRACE_SETEVRREGS requests are supported is isolated here, and in | |
| set_spe_registers. */ | |
| static void | |
| get_spe_registers (int tid, struct gdb_evrregset_t *evrregset) | |
| { | |
| if (have_ptrace_getsetevrregs) | |
| { | |
| if (ptrace (PTRACE_GETEVRREGS, tid, 0, evrregset) >= 0) | |
| return; | |
| else | |
| { | |
| /* EIO means that the PTRACE_GETEVRREGS request isn't supported; | |
| we just return zeros. */ | |
| if (errno == EIO) | |
| have_ptrace_getsetevrregs = 0; | |
| else | |
| /* Anything else needs to be reported. */ | |
| perror_with_name (_("Unable to fetch SPE registers")); | |
| } | |
| } | |
| memset (evrregset, 0, sizeof (*evrregset)); | |
| } | |
| /* Supply values from TID for SPE-specific raw registers: the upper | |
| halves of the GPRs, the accumulator, and the spefscr. REGNO must | |
| be the number of an upper half register, acc, spefscr, or -1 to | |
| supply the values of all registers. */ | |
| static void | |
| fetch_spe_register (struct regcache *regcache, int tid, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| struct gdb_evrregset_t evrregs; | |
| gdb_assert (sizeof (evrregs.evr[0]) | |
| == register_size (gdbarch, tdep->ppc_ev0_upper_regnum)); | |
| gdb_assert (sizeof (evrregs.acc) | |
| == register_size (gdbarch, tdep->ppc_acc_regnum)); | |
| gdb_assert (sizeof (evrregs.spefscr) | |
| == register_size (gdbarch, tdep->ppc_spefscr_regnum)); | |
| get_spe_registers (tid, &evrregs); | |
| if (regno == -1) | |
| { | |
| int i; | |
| for (i = 0; i < ppc_num_gprs; i++) | |
| regcache->raw_supply (tdep->ppc_ev0_upper_regnum + i, &evrregs.evr[i]); | |
| } | |
| else if (tdep->ppc_ev0_upper_regnum <= regno | |
| && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs) | |
| regcache->raw_supply (regno, | |
| &evrregs.evr[regno - tdep->ppc_ev0_upper_regnum]); | |
| if (regno == -1 | |
| || regno == tdep->ppc_acc_regnum) | |
| regcache->raw_supply (tdep->ppc_acc_regnum, &evrregs.acc); | |
| if (regno == -1 | |
| || regno == tdep->ppc_spefscr_regnum) | |
| regcache->raw_supply (tdep->ppc_spefscr_regnum, &evrregs.spefscr); | |
| } | |
| /* Use ptrace to fetch all registers from the register set with note | |
| type REGSET_ID, size REGSIZE, and layout described by REGSET, from | |
| process/thread TID and supply their values to REGCACHE. If ptrace | |
| returns ENODATA to indicate the regset is unavailable, mark the | |
| registers as unavailable in REGCACHE. */ | |
| static void | |
| fetch_regset (struct regcache *regcache, int tid, | |
| int regset_id, int regsetsize, const struct regset *regset) | |
| { | |
| void *buf = alloca (regsetsize); | |
| struct iovec iov; | |
| iov.iov_base = buf; | |
| iov.iov_len = regsetsize; | |
| if (ptrace (PTRACE_GETREGSET, tid, regset_id, &iov) < 0) | |
| { | |
| if (errno == ENODATA) | |
| regset->supply_regset (regset, regcache, -1, NULL, regsetsize); | |
| else | |
| perror_with_name (_("Couldn't get register set")); | |
| } | |
| else | |
| regset->supply_regset (regset, regcache, -1, buf, regsetsize); | |
| } | |
| /* Use ptrace to store register REGNUM of the regset with note type | |
| REGSET_ID, size REGSETSIZE, and layout described by REGSET, from | |
| REGCACHE back to process/thread TID. If REGNUM is -1 all registers | |
| in the set are collected and stored. */ | |
| static void | |
| store_regset (const struct regcache *regcache, int tid, int regnum, | |
| int regset_id, int regsetsize, const struct regset *regset) | |
| { | |
| void *buf = alloca (regsetsize); | |
| struct iovec iov; | |
| iov.iov_base = buf; | |
| iov.iov_len = regsetsize; | |
| /* Make sure that the buffer that will be stored has up to date values | |
| for the registers that won't be collected. */ | |
| if (ptrace (PTRACE_GETREGSET, tid, regset_id, &iov) < 0) | |
| perror_with_name (_("Couldn't get register set")); | |
| regset->collect_regset (regset, regcache, regnum, buf, regsetsize); | |
| if (ptrace (PTRACE_SETREGSET, tid, regset_id, &iov) < 0) | |
| perror_with_name (_("Couldn't set register set")); | |
| } | |
| /* Check whether the kernel provides a register set with number | |
| REGSET_ID of size REGSETSIZE for process/thread TID. */ | |
| static bool | |
| check_regset (int tid, int regset_id, int regsetsize) | |
| { | |
| void *buf = alloca (regsetsize); | |
| struct iovec iov; | |
| iov.iov_base = buf; | |
| iov.iov_len = regsetsize; | |
| if (ptrace (PTRACE_GETREGSET, tid, regset_id, &iov) >= 0 | |
| || errno == ENODATA) | |
| return true; | |
| else | |
| return false; | |
| } | |
| static void | |
| fetch_register (struct regcache *regcache, int tid, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| /* This isn't really an address. But ptrace thinks of it as one. */ | |
| CORE_ADDR regaddr = ppc_register_u_addr (gdbarch, regno); | |
| int bytes_transferred; | |
| gdb_byte buf[PPC_MAX_REGISTER_SIZE]; | |
| if (altivec_register_p (gdbarch, regno)) | |
| { | |
| /* If this is the first time through, or if it is not the first | |
| time through, and we have comfirmed that there is kernel | |
| support for such a ptrace request, then go and fetch the | |
| register. */ | |
| if (have_ptrace_getvrregs) | |
| { | |
| fetch_altivec_registers (regcache, tid, regno); | |
| return; | |
| } | |
| /* If we have discovered that there is no ptrace support for | |
| AltiVec registers, fall through and return zeroes, because | |
| regaddr will be -1 in this case. */ | |
| } | |
| else if (vsx_register_p (gdbarch, regno)) | |
| { | |
| if (have_ptrace_getsetvsxregs) | |
| { | |
| fetch_vsx_registers (regcache, tid, regno); | |
| return; | |
| } | |
| } | |
| else if (spe_register_p (gdbarch, regno)) | |
| { | |
| fetch_spe_register (regcache, tid, regno); | |
| return; | |
| } | |
| else if (regno == PPC_DSCR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_dscr_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_DSCR, | |
| PPC_LINUX_SIZEOF_DSCRREGSET, | |
| &ppc32_linux_dscrregset); | |
| return; | |
| } | |
| else if (regno == PPC_PPR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_ppr_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_PPR, | |
| PPC_LINUX_SIZEOF_PPRREGSET, | |
| &ppc32_linux_pprregset); | |
| return; | |
| } | |
| else if (regno == PPC_TAR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_tar_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_TAR, | |
| PPC_LINUX_SIZEOF_TARREGSET, | |
| &ppc32_linux_tarregset); | |
| return; | |
| } | |
| else if (PPC_IS_EBB_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_ebb); | |
| fetch_regset (regcache, tid, NT_PPC_EBB, | |
| PPC_LINUX_SIZEOF_EBBREGSET, | |
| &ppc32_linux_ebbregset); | |
| return; | |
| } | |
| else if (PPC_IS_PMU_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->ppc_mmcr0_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_PMU, | |
| PPC_LINUX_SIZEOF_PMUREGSET, | |
| &ppc32_linux_pmuregset); | |
| return; | |
| } | |
| else if (PPC_IS_TMSPR_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_spr); | |
| fetch_regset (regcache, tid, NT_PPC_TM_SPR, | |
| PPC_LINUX_SIZEOF_TM_SPRREGSET, | |
| &ppc32_linux_tm_sprregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTGP_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_core); | |
| const struct regset *cgprregset = ppc_linux_cgprregset (gdbarch); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CGPR, | |
| (tdep->wordsize == 4? | |
| PPC32_LINUX_SIZEOF_CGPRREGSET | |
| : PPC64_LINUX_SIZEOF_CGPRREGSET), | |
| cgprregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTFP_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_fpu); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CFPR, | |
| PPC_LINUX_SIZEOF_CFPRREGSET, | |
| &ppc32_linux_cfprregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTVMX_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_altivec); | |
| const struct regset *cvmxregset = ppc_linux_cvmxregset (gdbarch); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CVMX, | |
| PPC_LINUX_SIZEOF_CVMXREGSET, | |
| cvmxregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTVSX_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_vsx); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CVSX, | |
| PPC_LINUX_SIZEOF_CVSXREGSET, | |
| &ppc32_linux_cvsxregset); | |
| return; | |
| } | |
| else if (regno == PPC_CPPR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_cppr_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CPPR, | |
| PPC_LINUX_SIZEOF_CPPRREGSET, | |
| &ppc32_linux_cpprregset); | |
| return; | |
| } | |
| else if (regno == PPC_CDSCR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_cdscr_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CDSCR, | |
| PPC_LINUX_SIZEOF_CDSCRREGSET, | |
| &ppc32_linux_cdscrregset); | |
| return; | |
| } | |
| else if (regno == PPC_CTAR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_ctar_regnum != -1); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CTAR, | |
| PPC_LINUX_SIZEOF_CTARREGSET, | |
| &ppc32_linux_ctarregset); | |
| return; | |
| } | |
| if (regaddr == -1) | |
| { | |
| memset (buf, '\0', register_size (gdbarch, regno)); /* Supply zeroes */ | |
| regcache->raw_supply (regno, buf); | |
| return; | |
| } | |
| /* Read the raw register using sizeof(long) sized chunks. On a | |
| 32-bit platform, 64-bit floating-point registers will require two | |
| transfers. */ | |
| for (bytes_transferred = 0; | |
| bytes_transferred < register_size (gdbarch, regno); | |
| bytes_transferred += sizeof (long)) | |
| { | |
| long l; | |
| errno = 0; | |
| l = ptrace (PTRACE_PEEKUSER, tid, (PTRACE_TYPE_ARG3) regaddr, 0); | |
| regaddr += sizeof (long); | |
| if (errno != 0) | |
| { | |
| char message[128]; | |
| xsnprintf (message, sizeof (message), "reading register %s (#%d)", | |
| gdbarch_register_name (gdbarch, regno), regno); | |
| perror_with_name (message); | |
| } | |
| memcpy (&buf[bytes_transferred], &l, sizeof (l)); | |
| } | |
| /* Now supply the register. Keep in mind that the regcache's idea | |
| of the register's size may not be a multiple of sizeof | |
| (long). */ | |
| if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) | |
| { | |
| /* Little-endian values are always found at the left end of the | |
| bytes transferred. */ | |
| regcache->raw_supply (regno, buf); | |
| } | |
| else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) | |
| { | |
| /* Big-endian values are found at the right end of the bytes | |
| transferred. */ | |
| size_t padding = (bytes_transferred - register_size (gdbarch, regno)); | |
| regcache->raw_supply (regno, buf + padding); | |
| } | |
| else | |
| internal_error (__FILE__, __LINE__, | |
| _("fetch_register: unexpected byte order: %d"), | |
| gdbarch_byte_order (gdbarch)); | |
| } | |
| /* This function actually issues the request to ptrace, telling | |
| it to get all general-purpose registers and put them into the | |
| specified regset. | |
| If the ptrace request does not exist, this function returns 0 | |
| and properly sets the have_ptrace_* flag. If the request fails, | |
| this function calls perror_with_name. Otherwise, if the request | |
| succeeds, then the regcache gets filled and 1 is returned. */ | |
| static int | |
| fetch_all_gp_regs (struct regcache *regcache, int tid) | |
| { | |
| gdb_gregset_t gregset; | |
| if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetregs = 0; | |
| return 0; | |
| } | |
| perror_with_name (_("Couldn't get general-purpose registers.")); | |
| } | |
| supply_gregset (regcache, (const gdb_gregset_t *) &gregset); | |
| return 1; | |
| } | |
| /* This is a wrapper for the fetch_all_gp_regs function. It is | |
| responsible for verifying if this target has the ptrace request | |
| that can be used to fetch all general-purpose registers at one | |
| shot. If it doesn't, then we should fetch them using the | |
| old-fashioned way, which is to iterate over the registers and | |
| request them one by one. */ | |
| static void | |
| fetch_gp_regs (struct regcache *regcache, int tid) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| int i; | |
| if (have_ptrace_getsetregs) | |
| if (fetch_all_gp_regs (regcache, tid)) | |
| return; | |
| /* If we've hit this point, it doesn't really matter which | |
| architecture we are using. We just need to read the | |
| registers in the "old-fashioned way". */ | |
| for (i = 0; i < ppc_num_gprs; i++) | |
| fetch_register (regcache, tid, tdep->ppc_gp0_regnum + i); | |
| } | |
| /* This function actually issues the request to ptrace, telling | |
| it to get all floating-point registers and put them into the | |
| specified regset. | |
| If the ptrace request does not exist, this function returns 0 | |
| and properly sets the have_ptrace_* flag. If the request fails, | |
| this function calls perror_with_name. Otherwise, if the request | |
| succeeds, then the regcache gets filled and 1 is returned. */ | |
| static int | |
| fetch_all_fp_regs (struct regcache *regcache, int tid) | |
| { | |
| gdb_fpregset_t fpregs; | |
| if (ptrace (PTRACE_GETFPREGS, tid, 0, (void *) &fpregs) < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetfpregs = 0; | |
| return 0; | |
| } | |
| perror_with_name (_("Couldn't get floating-point registers.")); | |
| } | |
| supply_fpregset (regcache, (const gdb_fpregset_t *) &fpregs); | |
| return 1; | |
| } | |
| /* This is a wrapper for the fetch_all_fp_regs function. It is | |
| responsible for verifying if this target has the ptrace request | |
| that can be used to fetch all floating-point registers at one | |
| shot. If it doesn't, then we should fetch them using the | |
| old-fashioned way, which is to iterate over the registers and | |
| request them one by one. */ | |
| static void | |
| fetch_fp_regs (struct regcache *regcache, int tid) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| int i; | |
| if (have_ptrace_getsetfpregs) | |
| if (fetch_all_fp_regs (regcache, tid)) | |
| return; | |
| /* If we've hit this point, it doesn't really matter which | |
| architecture we are using. We just need to read the | |
| registers in the "old-fashioned way". */ | |
| for (i = 0; i < ppc_num_fprs; i++) | |
| fetch_register (regcache, tid, tdep->ppc_fp0_regnum + i); | |
| } | |
| static void | |
| fetch_ppc_registers (struct regcache *regcache, int tid) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| fetch_gp_regs (regcache, tid); | |
| if (tdep->ppc_fp0_regnum >= 0) | |
| fetch_fp_regs (regcache, tid); | |
| fetch_register (regcache, tid, gdbarch_pc_regnum (gdbarch)); | |
| if (tdep->ppc_ps_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_ps_regnum); | |
| if (tdep->ppc_cr_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_cr_regnum); | |
| if (tdep->ppc_lr_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_lr_regnum); | |
| if (tdep->ppc_ctr_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_ctr_regnum); | |
| if (tdep->ppc_xer_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_xer_regnum); | |
| if (tdep->ppc_mq_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_mq_regnum); | |
| if (ppc_linux_trap_reg_p (gdbarch)) | |
| { | |
| fetch_register (regcache, tid, PPC_ORIG_R3_REGNUM); | |
| fetch_register (regcache, tid, PPC_TRAP_REGNUM); | |
| } | |
| if (tdep->ppc_fpscr_regnum != -1) | |
| fetch_register (regcache, tid, tdep->ppc_fpscr_regnum); | |
| if (have_ptrace_getvrregs) | |
| if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1) | |
| fetch_altivec_registers (regcache, tid, -1); | |
| if (have_ptrace_getsetvsxregs) | |
| if (tdep->ppc_vsr0_upper_regnum != -1) | |
| fetch_vsx_registers (regcache, tid, -1); | |
| if (tdep->ppc_ev0_upper_regnum >= 0) | |
| fetch_spe_register (regcache, tid, -1); | |
| if (tdep->ppc_ppr_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_PPR, | |
| PPC_LINUX_SIZEOF_PPRREGSET, | |
| &ppc32_linux_pprregset); | |
| if (tdep->ppc_dscr_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_DSCR, | |
| PPC_LINUX_SIZEOF_DSCRREGSET, | |
| &ppc32_linux_dscrregset); | |
| if (tdep->ppc_tar_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_TAR, | |
| PPC_LINUX_SIZEOF_TARREGSET, | |
| &ppc32_linux_tarregset); | |
| if (tdep->have_ebb) | |
| fetch_regset (regcache, tid, NT_PPC_EBB, | |
| PPC_LINUX_SIZEOF_EBBREGSET, | |
| &ppc32_linux_ebbregset); | |
| if (tdep->ppc_mmcr0_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_PMU, | |
| PPC_LINUX_SIZEOF_PMUREGSET, | |
| &ppc32_linux_pmuregset); | |
| if (tdep->have_htm_spr) | |
| fetch_regset (regcache, tid, NT_PPC_TM_SPR, | |
| PPC_LINUX_SIZEOF_TM_SPRREGSET, | |
| &ppc32_linux_tm_sprregset); | |
| if (tdep->have_htm_core) | |
| { | |
| const struct regset *cgprregset = ppc_linux_cgprregset (gdbarch); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CGPR, | |
| (tdep->wordsize == 4? | |
| PPC32_LINUX_SIZEOF_CGPRREGSET | |
| : PPC64_LINUX_SIZEOF_CGPRREGSET), | |
| cgprregset); | |
| } | |
| if (tdep->have_htm_fpu) | |
| fetch_regset (regcache, tid, NT_PPC_TM_CFPR, | |
| PPC_LINUX_SIZEOF_CFPRREGSET, | |
| &ppc32_linux_cfprregset); | |
| if (tdep->have_htm_altivec) | |
| { | |
| const struct regset *cvmxregset = ppc_linux_cvmxregset (gdbarch); | |
| fetch_regset (regcache, tid, NT_PPC_TM_CVMX, | |
| PPC_LINUX_SIZEOF_CVMXREGSET, | |
| cvmxregset); | |
| } | |
| if (tdep->have_htm_vsx) | |
| fetch_regset (regcache, tid, NT_PPC_TM_CVSX, | |
| PPC_LINUX_SIZEOF_CVSXREGSET, | |
| &ppc32_linux_cvsxregset); | |
| if (tdep->ppc_cppr_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_TM_CPPR, | |
| PPC_LINUX_SIZEOF_CPPRREGSET, | |
| &ppc32_linux_cpprregset); | |
| if (tdep->ppc_cdscr_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_TM_CDSCR, | |
| PPC_LINUX_SIZEOF_CDSCRREGSET, | |
| &ppc32_linux_cdscrregset); | |
| if (tdep->ppc_ctar_regnum != -1) | |
| fetch_regset (regcache, tid, NT_PPC_TM_CTAR, | |
| PPC_LINUX_SIZEOF_CTARREGSET, | |
| &ppc32_linux_ctarregset); | |
| } | |
| /* Fetch registers from the child process. Fetch all registers if | |
| regno == -1, otherwise fetch all general registers or all floating | |
| point registers depending upon the value of regno. */ | |
| void | |
| ppc_linux_nat_target::fetch_registers (struct regcache *regcache, int regno) | |
| { | |
| pid_t tid = get_ptrace_pid (regcache->ptid ()); | |
| if (regno == -1) | |
| fetch_ppc_registers (regcache, tid); | |
| else | |
| fetch_register (regcache, tid, regno); | |
| } | |
| static void | |
| store_vsx_registers (const struct regcache *regcache, int tid, int regno) | |
| { | |
| int ret; | |
| gdb_vsxregset_t regs; | |
| const struct regset *vsxregset = ppc_linux_vsxregset (); | |
| ret = ptrace (PTRACE_GETVSXREGS, tid, 0, ®s); | |
| if (ret < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetvsxregs = 0; | |
| return; | |
| } | |
| perror_with_name (_("Unable to fetch VSX registers")); | |
| } | |
| vsxregset->collect_regset (vsxregset, regcache, regno, ®s, | |
| PPC_LINUX_SIZEOF_VSXREGSET); | |
| ret = ptrace (PTRACE_SETVSXREGS, tid, 0, ®s); | |
| if (ret < 0) | |
| perror_with_name (_("Unable to store VSX registers")); | |
| } | |
| static void | |
| store_altivec_registers (const struct regcache *regcache, int tid, | |
| int regno) | |
| { | |
| int ret; | |
| gdb_vrregset_t regs; | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| const struct regset *vrregset = ppc_linux_vrregset (gdbarch); | |
| ret = ptrace (PTRACE_GETVRREGS, tid, 0, ®s); | |
| if (ret < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getvrregs = 0; | |
| return; | |
| } | |
| perror_with_name (_("Unable to fetch AltiVec registers")); | |
| } | |
| vrregset->collect_regset (vrregset, regcache, regno, ®s, | |
| PPC_LINUX_SIZEOF_VRREGSET); | |
| ret = ptrace (PTRACE_SETVRREGS, tid, 0, ®s); | |
| if (ret < 0) | |
| perror_with_name (_("Unable to store AltiVec registers")); | |
| } | |
| /* Assuming TID referrs to an SPE process, set the top halves of TID's | |
| general-purpose registers and its SPE-specific registers to the | |
| values in EVRREGSET. If we don't support PTRACE_SETEVRREGS, do | |
| nothing. | |
| All the logic to deal with whether or not the PTRACE_GETEVRREGS and | |
| PTRACE_SETEVRREGS requests are supported is isolated here, and in | |
| get_spe_registers. */ | |
| static void | |
| set_spe_registers (int tid, struct gdb_evrregset_t *evrregset) | |
| { | |
| if (have_ptrace_getsetevrregs) | |
| { | |
| if (ptrace (PTRACE_SETEVRREGS, tid, 0, evrregset) >= 0) | |
| return; | |
| else | |
| { | |
| /* EIO means that the PTRACE_SETEVRREGS request isn't | |
| supported; we fail silently, and don't try the call | |
| again. */ | |
| if (errno == EIO) | |
| have_ptrace_getsetevrregs = 0; | |
| else | |
| /* Anything else needs to be reported. */ | |
| perror_with_name (_("Unable to set SPE registers")); | |
| } | |
| } | |
| } | |
| /* Write GDB's value for the SPE-specific raw register REGNO to TID. | |
| If REGNO is -1, write the values of all the SPE-specific | |
| registers. */ | |
| static void | |
| store_spe_register (const struct regcache *regcache, int tid, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| struct gdb_evrregset_t evrregs; | |
| gdb_assert (sizeof (evrregs.evr[0]) | |
| == register_size (gdbarch, tdep->ppc_ev0_upper_regnum)); | |
| gdb_assert (sizeof (evrregs.acc) | |
| == register_size (gdbarch, tdep->ppc_acc_regnum)); | |
| gdb_assert (sizeof (evrregs.spefscr) | |
| == register_size (gdbarch, tdep->ppc_spefscr_regnum)); | |
| if (regno == -1) | |
| /* Since we're going to write out every register, the code below | |
| should store to every field of evrregs; if that doesn't happen, | |
| make it obvious by initializing it with suspicious values. */ | |
| memset (&evrregs, 42, sizeof (evrregs)); | |
| else | |
| /* We can only read and write the entire EVR register set at a | |
| time, so to write just a single register, we do a | |
| read-modify-write maneuver. */ | |
| get_spe_registers (tid, &evrregs); | |
| if (regno == -1) | |
| { | |
| int i; | |
| for (i = 0; i < ppc_num_gprs; i++) | |
| regcache->raw_collect (tdep->ppc_ev0_upper_regnum + i, | |
| &evrregs.evr[i]); | |
| } | |
| else if (tdep->ppc_ev0_upper_regnum <= regno | |
| && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs) | |
| regcache->raw_collect (regno, | |
| &evrregs.evr[regno - tdep->ppc_ev0_upper_regnum]); | |
| if (regno == -1 | |
| || regno == tdep->ppc_acc_regnum) | |
| regcache->raw_collect (tdep->ppc_acc_regnum, | |
| &evrregs.acc); | |
| if (regno == -1 | |
| || regno == tdep->ppc_spefscr_regnum) | |
| regcache->raw_collect (tdep->ppc_spefscr_regnum, | |
| &evrregs.spefscr); | |
| /* Write back the modified register set. */ | |
| set_spe_registers (tid, &evrregs); | |
| } | |
| static void | |
| store_register (const struct regcache *regcache, int tid, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| /* This isn't really an address. But ptrace thinks of it as one. */ | |
| CORE_ADDR regaddr = ppc_register_u_addr (gdbarch, regno); | |
| int i; | |
| size_t bytes_to_transfer; | |
| gdb_byte buf[PPC_MAX_REGISTER_SIZE]; | |
| if (altivec_register_p (gdbarch, regno)) | |
| { | |
| store_altivec_registers (regcache, tid, regno); | |
| return; | |
| } | |
| else if (vsx_register_p (gdbarch, regno)) | |
| { | |
| store_vsx_registers (regcache, tid, regno); | |
| return; | |
| } | |
| else if (spe_register_p (gdbarch, regno)) | |
| { | |
| store_spe_register (regcache, tid, regno); | |
| return; | |
| } | |
| else if (regno == PPC_DSCR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_dscr_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_DSCR, | |
| PPC_LINUX_SIZEOF_DSCRREGSET, | |
| &ppc32_linux_dscrregset); | |
| return; | |
| } | |
| else if (regno == PPC_PPR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_ppr_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_PPR, | |
| PPC_LINUX_SIZEOF_PPRREGSET, | |
| &ppc32_linux_pprregset); | |
| return; | |
| } | |
| else if (regno == PPC_TAR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_tar_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_TAR, | |
| PPC_LINUX_SIZEOF_TARREGSET, | |
| &ppc32_linux_tarregset); | |
| return; | |
| } | |
| else if (PPC_IS_EBB_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_ebb); | |
| store_regset (regcache, tid, regno, NT_PPC_EBB, | |
| PPC_LINUX_SIZEOF_EBBREGSET, | |
| &ppc32_linux_ebbregset); | |
| return; | |
| } | |
| else if (PPC_IS_PMU_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->ppc_mmcr0_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_PMU, | |
| PPC_LINUX_SIZEOF_PMUREGSET, | |
| &ppc32_linux_pmuregset); | |
| return; | |
| } | |
| else if (PPC_IS_TMSPR_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_spr); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_SPR, | |
| PPC_LINUX_SIZEOF_TM_SPRREGSET, | |
| &ppc32_linux_tm_sprregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTGP_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_core); | |
| const struct regset *cgprregset = ppc_linux_cgprregset (gdbarch); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CGPR, | |
| (tdep->wordsize == 4? | |
| PPC32_LINUX_SIZEOF_CGPRREGSET | |
| : PPC64_LINUX_SIZEOF_CGPRREGSET), | |
| cgprregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTFP_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_fpu); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CFPR, | |
| PPC_LINUX_SIZEOF_CFPRREGSET, | |
| &ppc32_linux_cfprregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTVMX_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_altivec); | |
| const struct regset *cvmxregset = ppc_linux_cvmxregset (gdbarch); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CVMX, | |
| PPC_LINUX_SIZEOF_CVMXREGSET, | |
| cvmxregset); | |
| return; | |
| } | |
| else if (PPC_IS_CKPTVSX_REGNUM (regno)) | |
| { | |
| gdb_assert (tdep->have_htm_vsx); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CVSX, | |
| PPC_LINUX_SIZEOF_CVSXREGSET, | |
| &ppc32_linux_cvsxregset); | |
| return; | |
| } | |
| else if (regno == PPC_CPPR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_cppr_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CPPR, | |
| PPC_LINUX_SIZEOF_CPPRREGSET, | |
| &ppc32_linux_cpprregset); | |
| return; | |
| } | |
| else if (regno == PPC_CDSCR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_cdscr_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CDSCR, | |
| PPC_LINUX_SIZEOF_CDSCRREGSET, | |
| &ppc32_linux_cdscrregset); | |
| return; | |
| } | |
| else if (regno == PPC_CTAR_REGNUM) | |
| { | |
| gdb_assert (tdep->ppc_ctar_regnum != -1); | |
| store_regset (regcache, tid, regno, NT_PPC_TM_CTAR, | |
| PPC_LINUX_SIZEOF_CTARREGSET, | |
| &ppc32_linux_ctarregset); | |
| return; | |
| } | |
| if (regaddr == -1) | |
| return; | |
| /* First collect the register. Keep in mind that the regcache's | |
| idea of the register's size may not be a multiple of sizeof | |
| (long). */ | |
| memset (buf, 0, sizeof buf); | |
| bytes_to_transfer = align_up (register_size (gdbarch, regno), sizeof (long)); | |
| if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) | |
| { | |
| /* Little-endian values always sit at the left end of the buffer. */ | |
| regcache->raw_collect (regno, buf); | |
| } | |
| else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) | |
| { | |
| /* Big-endian values sit at the right end of the buffer. */ | |
| size_t padding = (bytes_to_transfer - register_size (gdbarch, regno)); | |
| regcache->raw_collect (regno, buf + padding); | |
| } | |
| for (i = 0; i < bytes_to_transfer; i += sizeof (long)) | |
| { | |
| long l; | |
| memcpy (&l, &buf[i], sizeof (l)); | |
| errno = 0; | |
| ptrace (PTRACE_POKEUSER, tid, (PTRACE_TYPE_ARG3) regaddr, l); | |
| regaddr += sizeof (long); | |
| if (errno == EIO | |
| && (regno == tdep->ppc_fpscr_regnum | |
| || regno == PPC_ORIG_R3_REGNUM | |
| || regno == PPC_TRAP_REGNUM)) | |
| { | |
| /* Some older kernel versions don't allow fpscr, orig_r3 | |
| or trap to be written. */ | |
| continue; | |
| } | |
| if (errno != 0) | |
| { | |
| char message[128]; | |
| xsnprintf (message, sizeof (message), "writing register %s (#%d)", | |
| gdbarch_register_name (gdbarch, regno), regno); | |
| perror_with_name (message); | |
| } | |
| } | |
| } | |
| /* This function actually issues the request to ptrace, telling | |
| it to store all general-purpose registers present in the specified | |
| regset. | |
| If the ptrace request does not exist, this function returns 0 | |
| and properly sets the have_ptrace_* flag. If the request fails, | |
| this function calls perror_with_name. Otherwise, if the request | |
| succeeds, then the regcache is stored and 1 is returned. */ | |
| static int | |
| store_all_gp_regs (const struct regcache *regcache, int tid, int regno) | |
| { | |
| gdb_gregset_t gregset; | |
| if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetregs = 0; | |
| return 0; | |
| } | |
| perror_with_name (_("Couldn't get general-purpose registers.")); | |
| } | |
| fill_gregset (regcache, &gregset, regno); | |
| if (ptrace (PTRACE_SETREGS, tid, 0, (void *) &gregset) < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetregs = 0; | |
| return 0; | |
| } | |
| perror_with_name (_("Couldn't set general-purpose registers.")); | |
| } | |
| return 1; | |
| } | |
| /* This is a wrapper for the store_all_gp_regs function. It is | |
| responsible for verifying if this target has the ptrace request | |
| that can be used to store all general-purpose registers at one | |
| shot. If it doesn't, then we should store them using the | |
| old-fashioned way, which is to iterate over the registers and | |
| store them one by one. */ | |
| static void | |
| store_gp_regs (const struct regcache *regcache, int tid, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| int i; | |
| if (have_ptrace_getsetregs) | |
| if (store_all_gp_regs (regcache, tid, regno)) | |
| return; | |
| /* If we hit this point, it doesn't really matter which | |
| architecture we are using. We just need to store the | |
| registers in the "old-fashioned way". */ | |
| for (i = 0; i < ppc_num_gprs; i++) | |
| store_register (regcache, tid, tdep->ppc_gp0_regnum + i); | |
| } | |
| /* This function actually issues the request to ptrace, telling | |
| it to store all floating-point registers present in the specified | |
| regset. | |
| If the ptrace request does not exist, this function returns 0 | |
| and properly sets the have_ptrace_* flag. If the request fails, | |
| this function calls perror_with_name. Otherwise, if the request | |
| succeeds, then the regcache is stored and 1 is returned. */ | |
| static int | |
| store_all_fp_regs (const struct regcache *regcache, int tid, int regno) | |
| { | |
| gdb_fpregset_t fpregs; | |
| if (ptrace (PTRACE_GETFPREGS, tid, 0, (void *) &fpregs) < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetfpregs = 0; | |
| return 0; | |
| } | |
| perror_with_name (_("Couldn't get floating-point registers.")); | |
| } | |
| fill_fpregset (regcache, &fpregs, regno); | |
| if (ptrace (PTRACE_SETFPREGS, tid, 0, (void *) &fpregs) < 0) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_getsetfpregs = 0; | |
| return 0; | |
| } | |
| perror_with_name (_("Couldn't set floating-point registers.")); | |
| } | |
| return 1; | |
| } | |
| /* This is a wrapper for the store_all_fp_regs function. It is | |
| responsible for verifying if this target has the ptrace request | |
| that can be used to store all floating-point registers at one | |
| shot. If it doesn't, then we should store them using the | |
| old-fashioned way, which is to iterate over the registers and | |
| store them one by one. */ | |
| static void | |
| store_fp_regs (const struct regcache *regcache, int tid, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| int i; | |
| if (have_ptrace_getsetfpregs) | |
| if (store_all_fp_regs (regcache, tid, regno)) | |
| return; | |
| /* If we hit this point, it doesn't really matter which | |
| architecture we are using. We just need to store the | |
| registers in the "old-fashioned way". */ | |
| for (i = 0; i < ppc_num_fprs; i++) | |
| store_register (regcache, tid, tdep->ppc_fp0_regnum + i); | |
| } | |
| static void | |
| store_ppc_registers (const struct regcache *regcache, int tid) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); | |
| store_gp_regs (regcache, tid, -1); | |
| if (tdep->ppc_fp0_regnum >= 0) | |
| store_fp_regs (regcache, tid, -1); | |
| store_register (regcache, tid, gdbarch_pc_regnum (gdbarch)); | |
| if (tdep->ppc_ps_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_ps_regnum); | |
| if (tdep->ppc_cr_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_cr_regnum); | |
| if (tdep->ppc_lr_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_lr_regnum); | |
| if (tdep->ppc_ctr_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_ctr_regnum); | |
| if (tdep->ppc_xer_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_xer_regnum); | |
| if (tdep->ppc_mq_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_mq_regnum); | |
| if (tdep->ppc_fpscr_regnum != -1) | |
| store_register (regcache, tid, tdep->ppc_fpscr_regnum); | |
| if (ppc_linux_trap_reg_p (gdbarch)) | |
| { | |
| store_register (regcache, tid, PPC_ORIG_R3_REGNUM); | |
| store_register (regcache, tid, PPC_TRAP_REGNUM); | |
| } | |
| if (have_ptrace_getvrregs) | |
| if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1) | |
| store_altivec_registers (regcache, tid, -1); | |
| if (have_ptrace_getsetvsxregs) | |
| if (tdep->ppc_vsr0_upper_regnum != -1) | |
| store_vsx_registers (regcache, tid, -1); | |
| if (tdep->ppc_ev0_upper_regnum >= 0) | |
| store_spe_register (regcache, tid, -1); | |
| if (tdep->ppc_ppr_regnum != -1) | |
| store_regset (regcache, tid, -1, NT_PPC_PPR, | |
| PPC_LINUX_SIZEOF_PPRREGSET, | |
| &ppc32_linux_pprregset); | |
| if (tdep->ppc_dscr_regnum != -1) | |
| store_regset (regcache, tid, -1, NT_PPC_DSCR, | |
| PPC_LINUX_SIZEOF_DSCRREGSET, | |
| &ppc32_linux_dscrregset); | |
| if (tdep->ppc_tar_regnum != -1) | |
| store_regset (regcache, tid, -1, NT_PPC_TAR, | |
| PPC_LINUX_SIZEOF_TARREGSET, | |
| &ppc32_linux_tarregset); | |
| if (tdep->ppc_mmcr0_regnum != -1) | |
| store_regset (regcache, tid, -1, NT_PPC_PMU, | |
| PPC_LINUX_SIZEOF_PMUREGSET, | |
| &ppc32_linux_pmuregset); | |
| if (tdep->have_htm_spr) | |
| store_regset (regcache, tid, -1, NT_PPC_TM_SPR, | |
| PPC_LINUX_SIZEOF_TM_SPRREGSET, | |
| &ppc32_linux_tm_sprregset); | |
| /* Because the EBB and checkpointed HTM registers can be | |
| unavailable, attempts to store them here would cause this | |
| function to fail most of the time, so we ignore them. */ | |
| } | |
| /* The cached DABR value, to install in new threads. | |
| This variable is used when the PowerPC HWDEBUG ptrace | |
| interface is not available. */ | |
| static long saved_dabr_value; | |
| /* Global structure that will store information about the available | |
| features provided by the PowerPC HWDEBUG ptrace interface. */ | |
| static struct ppc_debug_info hwdebug_info; | |
| /* Global variable that holds the maximum number of slots that the | |
| kernel will use. This is only used when PowerPC HWDEBUG ptrace interface | |
| is available. */ | |
| static size_t max_slots_number = 0; | |
| struct hw_break_tuple | |
| { | |
| long slot; | |
| struct ppc_hw_breakpoint *hw_break; | |
| }; | |
| /* This is an internal VEC created to store information about *points inserted | |
| for each thread. This is used when PowerPC HWDEBUG ptrace interface is | |
| available. */ | |
| struct thread_points | |
| { | |
| /* The TID to which this *point relates. */ | |
| int tid; | |
| /* Information about the *point, such as its address, type, etc. | |
| Each element inside this vector corresponds to a hardware | |
| breakpoint or watchpoint in the thread represented by TID. The maximum | |
| size of these vector is MAX_SLOTS_NUMBER. If the hw_break element of | |
| the tuple is NULL, then the position in the vector is free. */ | |
| struct hw_break_tuple *hw_breaks; | |
| }; | |
| static std::vector<thread_points *> ppc_threads; | |
| /* The version of the PowerPC HWDEBUG kernel interface that we will use, if | |
| available. */ | |
| #define PPC_DEBUG_CURRENT_VERSION 1 | |
| /* Returns non-zero if we support the PowerPC HWDEBUG ptrace interface. */ | |
| static int | |
| have_ptrace_hwdebug_interface (void) | |
| { | |
| static int have_ptrace_hwdebug_interface = -1; | |
| if (have_ptrace_hwdebug_interface == -1) | |
| { | |
| int tid; | |
| tid = inferior_ptid.lwp (); | |
| if (tid == 0) | |
| tid = inferior_ptid.pid (); | |
| /* Check for kernel support for PowerPC HWDEBUG ptrace interface. */ | |
| if (ptrace (PPC_PTRACE_GETHWDBGINFO, tid, 0, &hwdebug_info) >= 0) | |
| { | |
| /* Check whether PowerPC HWDEBUG ptrace interface is functional and | |
| provides any supported feature. */ | |
| if (hwdebug_info.features != 0) | |
| { | |
| have_ptrace_hwdebug_interface = 1; | |
| max_slots_number = hwdebug_info.num_instruction_bps | |
| + hwdebug_info.num_data_bps | |
| + hwdebug_info.num_condition_regs; | |
| return have_ptrace_hwdebug_interface; | |
| } | |
| } | |
| /* Old school interface and no PowerPC HWDEBUG ptrace support. */ | |
| have_ptrace_hwdebug_interface = 0; | |
| memset (&hwdebug_info, 0, sizeof (struct ppc_debug_info)); | |
| } | |
| return have_ptrace_hwdebug_interface; | |
| } | |
| int | |
| ppc_linux_nat_target::can_use_hw_breakpoint (enum bptype type, int cnt, int ot) | |
| { | |
| int total_hw_wp, total_hw_bp; | |
| if (have_ptrace_hwdebug_interface ()) | |
| { | |
| /* When PowerPC HWDEBUG ptrace interface is available, the number of | |
| available hardware watchpoints and breakpoints is stored at the | |
| hwdebug_info struct. */ | |
| total_hw_bp = hwdebug_info.num_instruction_bps; | |
| total_hw_wp = hwdebug_info.num_data_bps; | |
| } | |
| else | |
| { | |
| /* When we do not have PowerPC HWDEBUG ptrace interface, we should | |
| consider having 1 hardware watchpoint and no hardware breakpoints. */ | |
| total_hw_bp = 0; | |
| total_hw_wp = 1; | |
| } | |
| if (type == bp_hardware_watchpoint || type == bp_read_watchpoint | |
| || type == bp_access_watchpoint || type == bp_watchpoint) | |
| { | |
| if (cnt + ot > total_hw_wp) | |
| return -1; | |
| } | |
| else if (type == bp_hardware_breakpoint) | |
| { | |
| if (total_hw_bp == 0) | |
| { | |
| /* No hardware breakpoint support. */ | |
| return 0; | |
| } | |
| if (cnt > total_hw_bp) | |
| return -1; | |
| } | |
| if (!have_ptrace_hwdebug_interface ()) | |
| { | |
| int tid; | |
| ptid_t ptid = inferior_ptid; | |
| /* We need to know whether ptrace supports PTRACE_SET_DEBUGREG | |
| and whether the target has DABR. If either answer is no, the | |
| ptrace call will return -1. Fail in that case. */ | |
| tid = ptid.lwp (); | |
| if (tid == 0) | |
| tid = ptid.pid (); | |
| if (ptrace (PTRACE_SET_DEBUGREG, tid, 0, 0) == -1) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| int | |
| ppc_linux_nat_target::region_ok_for_hw_watchpoint (CORE_ADDR addr, int len) | |
| { | |
| /* Handle sub-8-byte quantities. */ | |
| if (len <= 0) | |
| return 0; | |
| /* The PowerPC HWDEBUG ptrace interface tells if there are alignment | |
| restrictions for watchpoints in the processors. In that case, we use that | |
| information to determine the hardcoded watchable region for | |
| watchpoints. */ | |
| if (have_ptrace_hwdebug_interface ()) | |
| { | |
| int region_size; | |
| /* Embedded DAC-based processors, like the PowerPC 440 have ranged | |
| watchpoints and can watch any access within an arbitrary memory | |
| region. This is useful to watch arrays and structs, for instance. It | |
| takes two hardware watchpoints though. */ | |
| if (len > 1 | |
| && hwdebug_info.features & PPC_DEBUG_FEATURE_DATA_BP_RANGE | |
| && linux_get_hwcap (current_top_target ()) & PPC_FEATURE_BOOKE) | |
| return 2; | |
| /* Check if the processor provides DAWR interface. */ | |
| if (hwdebug_info.features & PPC_DEBUG_FEATURE_DATA_BP_DAWR) | |
| /* DAWR interface allows to watch up to 512 byte wide ranges which | |
| can't cross a 512 byte boundary. */ | |
| region_size = 512; | |
| else | |
| region_size = hwdebug_info.data_bp_alignment; | |
| /* Server processors provide one hardware watchpoint and addr+len should | |
| fall in the watchable region provided by the ptrace interface. */ | |
| if (region_size | |
| && (addr + len > (addr & ~(region_size - 1)) + region_size)) | |
| return 0; | |
| } | |
| /* addr+len must fall in the 8 byte watchable region for DABR-based | |
| processors (i.e., server processors). Without the new PowerPC HWDEBUG | |
| ptrace interface, DAC-based processors (i.e., embedded processors) will | |
| use addresses aligned to 4-bytes due to the way the read/write flags are | |
| passed in the old ptrace interface. */ | |
| else if (((linux_get_hwcap (current_top_target ()) & PPC_FEATURE_BOOKE) | |
| && (addr + len) > (addr & ~3) + 4) | |
| || (addr + len) > (addr & ~7) + 8) | |
| return 0; | |
| return 1; | |
| } | |
| /* This function compares two ppc_hw_breakpoint structs field-by-field. */ | |
| static int | |
| hwdebug_point_cmp (struct ppc_hw_breakpoint *a, struct ppc_hw_breakpoint *b) | |
| { | |
| return (a->trigger_type == b->trigger_type | |
| && a->addr_mode == b->addr_mode | |
| && a->condition_mode == b->condition_mode | |
| && a->addr == b->addr | |
| && a->addr2 == b->addr2 | |
| && a->condition_value == b->condition_value); | |
| } | |
| /* This function can be used to retrieve a thread_points by the TID of the | |
| related process/thread. If nothing has been found, and ALLOC_NEW is 0, | |
| it returns NULL. If ALLOC_NEW is non-zero, a new thread_points for the | |
| provided TID will be created and returned. */ | |
| static struct thread_points * | |
| hwdebug_find_thread_points_by_tid (int tid, int alloc_new) | |
| { | |
| for (thread_points *t : ppc_threads) | |
| { | |
| if (t->tid == tid) | |
| return t; | |
| } | |
| struct thread_points *t = NULL; | |
| /* Do we need to allocate a new point_item | |
| if the wanted one does not exist? */ | |
| if (alloc_new) | |
| { | |
| t = XNEW (struct thread_points); | |
| t->hw_breaks = XCNEWVEC (struct hw_break_tuple, max_slots_number); | |
| t->tid = tid; | |
| ppc_threads.push_back (t); | |
| } | |
| return t; | |
| } | |
| /* This function is a generic wrapper that is responsible for inserting a | |
| *point (i.e., calling `ptrace' in order to issue the request to the | |
| kernel) and registering it internally in GDB. */ | |
| static void | |
| hwdebug_insert_point (struct ppc_hw_breakpoint *b, int tid) | |
| { | |
| int i; | |
| long slot; | |
| gdb::unique_xmalloc_ptr<ppc_hw_breakpoint> p (XDUP (ppc_hw_breakpoint, b)); | |
| struct hw_break_tuple *hw_breaks; | |
| struct thread_points *t; | |
| errno = 0; | |
| slot = ptrace (PPC_PTRACE_SETHWDEBUG, tid, 0, p.get ()); | |
| if (slot < 0) | |
| perror_with_name (_("Unexpected error setting breakpoint or watchpoint")); | |
| /* Everything went fine, so we have to register this *point. */ | |
| t = hwdebug_find_thread_points_by_tid (tid, 1); | |
| gdb_assert (t != NULL); | |
| hw_breaks = t->hw_breaks; | |
| /* Find a free element in the hw_breaks vector. */ | |
| for (i = 0; i < max_slots_number; i++) | |
| { | |
| if (hw_breaks[i].hw_break == NULL) | |
| { | |
| hw_breaks[i].slot = slot; | |
| hw_breaks[i].hw_break = p.release (); | |
| break; | |
| } | |
| } | |
| gdb_assert (i != max_slots_number); | |
| } | |
| /* This function is a generic wrapper that is responsible for removing a | |
| *point (i.e., calling `ptrace' in order to issue the request to the | |
| kernel), and unregistering it internally at GDB. */ | |
| static void | |
| hwdebug_remove_point (struct ppc_hw_breakpoint *b, int tid) | |
| { | |
| int i; | |
| struct hw_break_tuple *hw_breaks; | |
| struct thread_points *t; | |
| t = hwdebug_find_thread_points_by_tid (tid, 0); | |
| gdb_assert (t != NULL); | |
| hw_breaks = t->hw_breaks; | |
| for (i = 0; i < max_slots_number; i++) | |
| if (hw_breaks[i].hw_break && hwdebug_point_cmp (hw_breaks[i].hw_break, b)) | |
| break; | |
| gdb_assert (i != max_slots_number); | |
| /* We have to ignore ENOENT errors because the kernel implements hardware | |
| breakpoints/watchpoints as "one-shot", that is, they are automatically | |
| deleted when hit. */ | |
| errno = 0; | |
| if (ptrace (PPC_PTRACE_DELHWDEBUG, tid, 0, hw_breaks[i].slot) < 0) | |
| if (errno != ENOENT) | |
| perror_with_name (_("Unexpected error deleting " | |
| "breakpoint or watchpoint")); | |
| xfree (hw_breaks[i].hw_break); | |
| hw_breaks[i].hw_break = NULL; | |
| } | |
| /* Return the number of registers needed for a ranged breakpoint. */ | |
| int | |
| ppc_linux_nat_target::ranged_break_num_registers () | |
| { | |
| return ((have_ptrace_hwdebug_interface () | |
| && hwdebug_info.features & PPC_DEBUG_FEATURE_INSN_BP_RANGE)? | |
| 2 : -1); | |
| } | |
| /* Insert the hardware breakpoint described by BP_TGT. Returns 0 for | |
| success, 1 if hardware breakpoints are not supported or -1 for failure. */ | |
| int | |
| ppc_linux_nat_target::insert_hw_breakpoint (struct gdbarch *gdbarch, | |
| struct bp_target_info *bp_tgt) | |
| { | |
| struct lwp_info *lp; | |
| struct ppc_hw_breakpoint p; | |
| if (!have_ptrace_hwdebug_interface ()) | |
| return -1; | |
| p.version = PPC_DEBUG_CURRENT_VERSION; | |
| p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE; | |
| p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE; | |
| p.addr = (uint64_t) (bp_tgt->placed_address = bp_tgt->reqstd_address); | |
| p.condition_value = 0; | |
| if (bp_tgt->length) | |
| { | |
| p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE; | |
| /* The breakpoint will trigger if the address of the instruction is | |
| within the defined range, as follows: p.addr <= address < p.addr2. */ | |
| p.addr2 = (uint64_t) bp_tgt->placed_address + bp_tgt->length; | |
| } | |
| else | |
| { | |
| p.addr_mode = PPC_BREAKPOINT_MODE_EXACT; | |
| p.addr2 = 0; | |
| } | |
| ALL_LWPS (lp) | |
| hwdebug_insert_point (&p, lp->ptid.lwp ()); | |
| return 0; | |
| } | |
| int | |
| ppc_linux_nat_target::remove_hw_breakpoint (struct gdbarch *gdbarch, | |
| struct bp_target_info *bp_tgt) | |
| { | |
| struct lwp_info *lp; | |
| struct ppc_hw_breakpoint p; | |
| if (!have_ptrace_hwdebug_interface ()) | |
| return -1; | |
| p.version = PPC_DEBUG_CURRENT_VERSION; | |
| p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE; | |
| p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE; | |
| p.addr = (uint64_t) bp_tgt->placed_address; | |
| p.condition_value = 0; | |
| if (bp_tgt->length) | |
| { | |
| p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE; | |
| /* The breakpoint will trigger if the address of the instruction is within | |
| the defined range, as follows: p.addr <= address < p.addr2. */ | |
| p.addr2 = (uint64_t) bp_tgt->placed_address + bp_tgt->length; | |
| } | |
| else | |
| { | |
| p.addr_mode = PPC_BREAKPOINT_MODE_EXACT; | |
| p.addr2 = 0; | |
| } | |
| ALL_LWPS (lp) | |
| hwdebug_remove_point (&p, lp->ptid.lwp ()); | |
| return 0; | |
| } | |
| static int | |
| get_trigger_type (enum target_hw_bp_type type) | |
| { | |
| int t; | |
| if (type == hw_read) | |
| t = PPC_BREAKPOINT_TRIGGER_READ; | |
| else if (type == hw_write) | |
| t = PPC_BREAKPOINT_TRIGGER_WRITE; | |
| else | |
| t = PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE; | |
| return t; | |
| } | |
| /* Insert a new masked watchpoint at ADDR using the mask MASK. | |
| RW may be hw_read for a read watchpoint, hw_write for a write watchpoint | |
| or hw_access for an access watchpoint. Returns 0 on success and throws | |
| an error on failure. */ | |
| int | |
| ppc_linux_nat_target::insert_mask_watchpoint (CORE_ADDR addr, CORE_ADDR mask, | |
| target_hw_bp_type rw) | |
| { | |
| struct lwp_info *lp; | |
| struct ppc_hw_breakpoint p; | |
| gdb_assert (have_ptrace_hwdebug_interface ()); | |
| p.version = PPC_DEBUG_CURRENT_VERSION; | |
| p.trigger_type = get_trigger_type (rw); | |
| p.addr_mode = PPC_BREAKPOINT_MODE_MASK; | |
| p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE; | |
| p.addr = addr; | |
| p.addr2 = mask; | |
| p.condition_value = 0; | |
| ALL_LWPS (lp) | |
| hwdebug_insert_point (&p, lp->ptid.lwp ()); | |
| return 0; | |
| } | |
| /* Remove a masked watchpoint at ADDR with the mask MASK. | |
| RW may be hw_read for a read watchpoint, hw_write for a write watchpoint | |
| or hw_access for an access watchpoint. Returns 0 on success and throws | |
| an error on failure. */ | |
| int | |
| ppc_linux_nat_target::remove_mask_watchpoint (CORE_ADDR addr, CORE_ADDR mask, | |
| target_hw_bp_type rw) | |
| { | |
| struct lwp_info *lp; | |
| struct ppc_hw_breakpoint p; | |
| gdb_assert (have_ptrace_hwdebug_interface ()); | |
| p.version = PPC_DEBUG_CURRENT_VERSION; | |
| p.trigger_type = get_trigger_type (rw); | |
| p.addr_mode = PPC_BREAKPOINT_MODE_MASK; | |
| p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE; | |
| p.addr = addr; | |
| p.addr2 = mask; | |
| p.condition_value = 0; | |
| ALL_LWPS (lp) | |
| hwdebug_remove_point (&p, lp->ptid.lwp ()); | |
| return 0; | |
| } | |
| /* Check whether we have at least one free DVC register. */ | |
| static int | |
| can_use_watchpoint_cond_accel (void) | |
| { | |
| struct thread_points *p; | |
| int tid = inferior_ptid.lwp (); | |
| int cnt = hwdebug_info.num_condition_regs, i; | |
| if (!have_ptrace_hwdebug_interface () || cnt == 0) | |
| return 0; | |
| p = hwdebug_find_thread_points_by_tid (tid, 0); | |
| if (p) | |
| { | |
| for (i = 0; i < max_slots_number; i++) | |
| if (p->hw_breaks[i].hw_break != NULL | |
| && (p->hw_breaks[i].hw_break->condition_mode | |
| != PPC_BREAKPOINT_CONDITION_NONE)) | |
| cnt--; | |
| /* There are no available slots now. */ | |
| if (cnt <= 0) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* Calculate the enable bits and the contents of the Data Value Compare | |
| debug register present in BookE processors. | |
| ADDR is the address to be watched, LEN is the length of watched data | |
| and DATA_VALUE is the value which will trigger the watchpoint. | |
| On exit, CONDITION_MODE will hold the enable bits for the DVC, and | |
| CONDITION_VALUE will hold the value which should be put in the | |
| DVC register. */ | |
| static void | |
| calculate_dvc (CORE_ADDR addr, int len, CORE_ADDR data_value, | |
| uint32_t *condition_mode, uint64_t *condition_value) | |
| { | |
| int i, num_byte_enable, align_offset, num_bytes_off_dvc, | |
| rightmost_enabled_byte; | |
| CORE_ADDR addr_end_data, addr_end_dvc; | |
| /* The DVC register compares bytes within fixed-length windows which | |
| are word-aligned, with length equal to that of the DVC register. | |
| We need to calculate where our watch region is relative to that | |
| window and enable comparison of the bytes which fall within it. */ | |
| align_offset = addr % hwdebug_info.sizeof_condition; | |
| addr_end_data = addr + len; | |
| addr_end_dvc = (addr - align_offset | |
| + hwdebug_info.sizeof_condition); | |
| num_bytes_off_dvc = (addr_end_data > addr_end_dvc)? | |
| addr_end_data - addr_end_dvc : 0; | |
| num_byte_enable = len - num_bytes_off_dvc; | |
| /* Here, bytes are numbered from right to left. */ | |
| rightmost_enabled_byte = (addr_end_data < addr_end_dvc)? | |
| addr_end_dvc - addr_end_data : 0; | |
| *condition_mode = PPC_BREAKPOINT_CONDITION_AND; | |
| for (i = 0; i < num_byte_enable; i++) | |
| *condition_mode | |
| |= PPC_BREAKPOINT_CONDITION_BE (i + rightmost_enabled_byte); | |
| /* Now we need to match the position within the DVC of the comparison | |
| value with where the watch region is relative to the window | |
| (i.e., the ALIGN_OFFSET). */ | |
| *condition_value = ((uint64_t) data_value >> num_bytes_off_dvc * 8 | |
| << rightmost_enabled_byte * 8); | |
| } | |
| /* Return the number of memory locations that need to be accessed to | |
| evaluate the expression which generated the given value chain. | |
| Returns -1 if there's any register access involved, or if there are | |
| other kinds of values which are not acceptable in a condition | |
| expression (e.g., lval_computed or lval_internalvar). */ | |
| static int | |
| num_memory_accesses (const std::vector<value_ref_ptr> &chain) | |
| { | |
| int found_memory_cnt = 0; | |
| /* The idea here is that evaluating an expression generates a series | |
| of values, one holding the value of every subexpression. (The | |
| expression a*b+c has five subexpressions: a, b, a*b, c, and | |
| a*b+c.) GDB's values hold almost enough information to establish | |
| the criteria given above --- they identify memory lvalues, | |
| register lvalues, computed values, etcetera. So we can evaluate | |
| the expression, and then scan the chain of values that leaves | |
| behind to determine the memory locations involved in the evaluation | |
| of an expression. | |
| However, I don't think that the values returned by inferior | |
| function calls are special in any way. So this function may not | |
| notice that an expression contains an inferior function call. | |
| FIXME. */ | |
| for (const value_ref_ptr &iter : chain) | |
| { | |
| struct value *v = iter.get (); | |
| /* Constants and values from the history are fine. */ | |
| if (VALUE_LVAL (v) == not_lval || deprecated_value_modifiable (v) == 0) | |
| continue; | |
| else if (VALUE_LVAL (v) == lval_memory) | |
| { | |
| /* A lazy memory lvalue is one that GDB never needed to fetch; | |
| we either just used its address (e.g., `a' in `a.b') or | |
| we never needed it at all (e.g., `a' in `a,b'). */ | |
| if (!value_lazy (v)) | |
| found_memory_cnt++; | |
| } | |
| /* Other kinds of values are not fine. */ | |
| else | |
| return -1; | |
| } | |
| return found_memory_cnt; | |
| } | |
| /* Verifies whether the expression COND can be implemented using the | |
| DVC (Data Value Compare) register in BookE processors. The expression | |
| must test the watch value for equality with a constant expression. | |
| If the function returns 1, DATA_VALUE will contain the constant against | |
| which the watch value should be compared and LEN will contain the size | |
| of the constant. */ | |
| static int | |
| check_condition (CORE_ADDR watch_addr, struct expression *cond, | |
| CORE_ADDR *data_value, int *len) | |
| { | |
| int pc = 1, num_accesses_left, num_accesses_right; | |
| struct value *left_val, *right_val; | |
| std::vector<value_ref_ptr> left_chain, right_chain; | |
| if (cond->elts[0].opcode != BINOP_EQUAL) | |
| return 0; | |
| fetch_subexp_value (cond, &pc, &left_val, NULL, &left_chain, 0); | |
| num_accesses_left = num_memory_accesses (left_chain); | |
| if (left_val == NULL || num_accesses_left < 0) | |
| return 0; | |
| fetch_subexp_value (cond, &pc, &right_val, NULL, &right_chain, 0); | |
| num_accesses_right = num_memory_accesses (right_chain); | |
| if (right_val == NULL || num_accesses_right < 0) | |
| return 0; | |
| if (num_accesses_left == 1 && num_accesses_right == 0 | |
| && VALUE_LVAL (left_val) == lval_memory | |
| && value_address (left_val) == watch_addr) | |
| { | |
| *data_value = value_as_long (right_val); | |
| /* DATA_VALUE is the constant in RIGHT_VAL, but actually has | |
| the same type as the memory region referenced by LEFT_VAL. */ | |
| *len = TYPE_LENGTH (check_typedef (value_type (left_val))); | |
| } | |
| else if (num_accesses_left == 0 && num_accesses_right == 1 | |
| && VALUE_LVAL (right_val) == lval_memory | |
| && value_address (right_val) == watch_addr) | |
| { | |
| *data_value = value_as_long (left_val); | |
| /* DATA_VALUE is the constant in LEFT_VAL, but actually has | |
| the same type as the memory region referenced by RIGHT_VAL. */ | |
| *len = TYPE_LENGTH (check_typedef (value_type (right_val))); | |
| } | |
| else | |
| return 0; | |
| return 1; | |
| } | |
| /* Return non-zero if the target is capable of using hardware to evaluate | |
| the condition expression, thus only triggering the watchpoint when it is | |
| true. */ | |
| bool | |
| ppc_linux_nat_target::can_accel_watchpoint_condition (CORE_ADDR addr, int len, | |
| int rw, | |
| struct expression *cond) | |
| { | |
| CORE_ADDR data_value; | |
| return (have_ptrace_hwdebug_interface () | |
| && hwdebug_info.num_condition_regs > 0 | |
| && check_condition (addr, cond, &data_value, &len)); | |
| } | |
| /* Set up P with the parameters necessary to request a watchpoint covering | |
| LEN bytes starting at ADDR and if possible with condition expression COND | |
| evaluated by hardware. INSERT tells if we are creating a request for | |
| inserting or removing the watchpoint. */ | |
| static void | |
| create_watchpoint_request (struct ppc_hw_breakpoint *p, CORE_ADDR addr, | |
| int len, enum target_hw_bp_type type, | |
| struct expression *cond, int insert) | |
| { | |
| if (len == 1 | |
| || !(hwdebug_info.features & PPC_DEBUG_FEATURE_DATA_BP_RANGE)) | |
| { | |
| int use_condition; | |
| CORE_ADDR data_value; | |
| use_condition = (insert? can_use_watchpoint_cond_accel () | |
| : hwdebug_info.num_condition_regs > 0); | |
| if (cond && use_condition && check_condition (addr, cond, | |
| &data_value, &len)) | |
| calculate_dvc (addr, len, data_value, &p->condition_mode, | |
| &p->condition_value); | |
| else | |
| { | |
| p->condition_mode = PPC_BREAKPOINT_CONDITION_NONE; | |
| p->condition_value = 0; | |
| } | |
| p->addr_mode = PPC_BREAKPOINT_MODE_EXACT; | |
| p->addr2 = 0; | |
| } | |
| else | |
| { | |
| p->addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE; | |
| p->condition_mode = PPC_BREAKPOINT_CONDITION_NONE; | |
| p->condition_value = 0; | |
| /* The watchpoint will trigger if the address of the memory access is | |
| within the defined range, as follows: p->addr <= address < p->addr2. | |
| Note that the above sentence just documents how ptrace interprets | |
| its arguments; the watchpoint is set to watch the range defined by | |
| the user _inclusively_, as specified by the user interface. */ | |
| p->addr2 = (uint64_t) addr + len; | |
| } | |
| p->version = PPC_DEBUG_CURRENT_VERSION; | |
| p->trigger_type = get_trigger_type (type); | |
| p->addr = (uint64_t) addr; | |
| } | |
| int | |
| ppc_linux_nat_target::insert_watchpoint (CORE_ADDR addr, int len, | |
| enum target_hw_bp_type type, | |
| struct expression *cond) | |
| { | |
| struct lwp_info *lp; | |
| int ret = -1; | |
| if (have_ptrace_hwdebug_interface ()) | |
| { | |
| struct ppc_hw_breakpoint p; | |
| create_watchpoint_request (&p, addr, len, type, cond, 1); | |
| ALL_LWPS (lp) | |
| hwdebug_insert_point (&p, lp->ptid.lwp ()); | |
| ret = 0; | |
| } | |
| else | |
| { | |
| long dabr_value; | |
| long read_mode, write_mode; | |
| if (linux_get_hwcap (current_top_target ()) & PPC_FEATURE_BOOKE) | |
| { | |
| /* PowerPC 440 requires only the read/write flags to be passed | |
| to the kernel. */ | |
| read_mode = 1; | |
| write_mode = 2; | |
| } | |
| else | |
| { | |
| /* PowerPC 970 and other DABR-based processors are required to pass | |
| the Breakpoint Translation bit together with the flags. */ | |
| read_mode = 5; | |
| write_mode = 6; | |
| } | |
| dabr_value = addr & ~(read_mode | write_mode); | |
| switch (type) | |
| { | |
| case hw_read: | |
| /* Set read and translate bits. */ | |
| dabr_value |= read_mode; | |
| break; | |
| case hw_write: | |
| /* Set write and translate bits. */ | |
| dabr_value |= write_mode; | |
| break; | |
| case hw_access: | |
| /* Set read, write and translate bits. */ | |
| dabr_value |= read_mode | write_mode; | |
| break; | |
| } | |
| saved_dabr_value = dabr_value; | |
| ALL_LWPS (lp) | |
| if (ptrace (PTRACE_SET_DEBUGREG, lp->ptid.lwp (), 0, | |
| saved_dabr_value) < 0) | |
| return -1; | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| int | |
| ppc_linux_nat_target::remove_watchpoint (CORE_ADDR addr, int len, | |
| enum target_hw_bp_type type, | |
| struct expression *cond) | |
| { | |
| struct lwp_info *lp; | |
| int ret = -1; | |
| if (have_ptrace_hwdebug_interface ()) | |
| { | |
| struct ppc_hw_breakpoint p; | |
| create_watchpoint_request (&p, addr, len, type, cond, 0); | |
| ALL_LWPS (lp) | |
| hwdebug_remove_point (&p, lp->ptid.lwp ()); | |
| ret = 0; | |
| } | |
| else | |
| { | |
| saved_dabr_value = 0; | |
| ALL_LWPS (lp) | |
| if (ptrace (PTRACE_SET_DEBUGREG, lp->ptid.lwp (), 0, | |
| saved_dabr_value) < 0) | |
| return -1; | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| void | |
| ppc_linux_nat_target::low_new_thread (struct lwp_info *lp) | |
| { | |
| int tid = lp->ptid.lwp (); | |
| if (have_ptrace_hwdebug_interface ()) | |
| { | |
| int i; | |
| struct thread_points *p; | |
| struct hw_break_tuple *hw_breaks; | |
| if (ppc_threads.empty ()) | |
| return; | |
| /* Get a list of breakpoints from any thread. */ | |
| p = ppc_threads.back (); | |
| hw_breaks = p->hw_breaks; | |
| /* Copy that thread's breakpoints and watchpoints to the new thread. */ | |
| for (i = 0; i < max_slots_number; i++) | |
| if (hw_breaks[i].hw_break) | |
| { | |
| /* Older kernels did not make new threads inherit their parent | |
| thread's debug state, so we always clear the slot and replicate | |
| the debug state ourselves, ensuring compatibility with all | |
| kernels. */ | |
| /* The ppc debug resource accounting is done through "slots". | |
| Ask the kernel the deallocate this specific *point's slot. */ | |
| ptrace (PPC_PTRACE_DELHWDEBUG, tid, 0, hw_breaks[i].slot); | |
| hwdebug_insert_point (hw_breaks[i].hw_break, tid); | |
| } | |
| } | |
| else | |
| ptrace (PTRACE_SET_DEBUGREG, tid, 0, saved_dabr_value); | |
| } | |
| static void | |
| ppc_linux_thread_exit (struct thread_info *tp, int silent) | |
| { | |
| int i; | |
| int tid = tp->ptid.lwp (); | |
| struct hw_break_tuple *hw_breaks; | |
| struct thread_points *t = NULL; | |
| if (!have_ptrace_hwdebug_interface ()) | |
| return; | |
| for (i = 0; i < ppc_threads.size (); i++) | |
| { | |
| if (ppc_threads[i]->tid == tid) | |
| { | |
| t = ppc_threads[i]; | |
| break; | |
| } | |
| } | |
| if (t == NULL) | |
| return; | |
| unordered_remove (ppc_threads, i); | |
| hw_breaks = t->hw_breaks; | |
| for (i = 0; i < max_slots_number; i++) | |
| if (hw_breaks[i].hw_break) | |
| xfree (hw_breaks[i].hw_break); | |
| xfree (t->hw_breaks); | |
| xfree (t); | |
| } | |
| bool | |
| ppc_linux_nat_target::stopped_data_address (CORE_ADDR *addr_p) | |
| { | |
| siginfo_t siginfo; | |
| if (!linux_nat_get_siginfo (inferior_ptid, &siginfo)) | |
| return false; | |
| if (siginfo.si_signo != SIGTRAP | |
| || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */) | |
| return false; | |
| if (have_ptrace_hwdebug_interface ()) | |
| { | |
| int i; | |
| struct thread_points *t; | |
| struct hw_break_tuple *hw_breaks; | |
| /* The index (or slot) of the *point is passed in the si_errno field. */ | |
| int slot = siginfo.si_errno; | |
| t = hwdebug_find_thread_points_by_tid (inferior_ptid.lwp (), 0); | |
| /* Find out if this *point is a hardware breakpoint. | |
| If so, we should return 0. */ | |
| if (t) | |
| { | |
| hw_breaks = t->hw_breaks; | |
| for (i = 0; i < max_slots_number; i++) | |
| if (hw_breaks[i].hw_break && hw_breaks[i].slot == slot | |
| && hw_breaks[i].hw_break->trigger_type | |
| == PPC_BREAKPOINT_TRIGGER_EXECUTE) | |
| return false; | |
| } | |
| } | |
| *addr_p = (CORE_ADDR) (uintptr_t) siginfo.si_addr; | |
| return true; | |
| } | |
| bool | |
| ppc_linux_nat_target::stopped_by_watchpoint () | |
| { | |
| CORE_ADDR addr; | |
| return stopped_data_address (&addr); | |
| } | |
| bool | |
| ppc_linux_nat_target::watchpoint_addr_within_range (CORE_ADDR addr, | |
| CORE_ADDR start, | |
| int length) | |
| { | |
| int mask; | |
| if (have_ptrace_hwdebug_interface () | |
| && linux_get_hwcap (current_top_target ()) & PPC_FEATURE_BOOKE) | |
| return start <= addr && start + length >= addr; | |
| else if (linux_get_hwcap (current_top_target ()) & PPC_FEATURE_BOOKE) | |
| mask = 3; | |
| else | |
| mask = 7; | |
| addr &= ~mask; | |
| /* Check whether [start, start+length-1] intersects [addr, addr+mask]. */ | |
| return start <= addr + mask && start + length - 1 >= addr; | |
| } | |
| /* Return the number of registers needed for a masked hardware watchpoint. */ | |
| int | |
| ppc_linux_nat_target::masked_watch_num_registers (CORE_ADDR addr, CORE_ADDR mask) | |
| { | |
| if (!have_ptrace_hwdebug_interface () | |
| || (hwdebug_info.features & PPC_DEBUG_FEATURE_DATA_BP_MASK) == 0) | |
| return -1; | |
| else if ((mask & 0xC0000000) != 0xC0000000) | |
| { | |
| warning (_("The given mask covers kernel address space " | |
| "and cannot be used.\n")); | |
| return -2; | |
| } | |
| else | |
| return 2; | |
| } | |
| void | |
| ppc_linux_nat_target::store_registers (struct regcache *regcache, int regno) | |
| { | |
| pid_t tid = get_ptrace_pid (regcache->ptid ()); | |
| if (regno >= 0) | |
| store_register (regcache, tid, regno); | |
| else | |
| store_ppc_registers (regcache, tid); | |
| } | |
| /* Functions for transferring registers between a gregset_t or fpregset_t | |
| (see sys/ucontext.h) and gdb's regcache. The word size is that used | |
| by the ptrace interface, not the current program's ABI. Eg. if a | |
| powerpc64-linux gdb is being used to debug a powerpc32-linux app, we | |
| read or write 64-bit gregsets. This is to suit the host libthread_db. */ | |
| void | |
| supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp) | |
| { | |
| const struct regset *regset = ppc_linux_gregset (sizeof (long)); | |
| ppc_supply_gregset (regset, regcache, -1, gregsetp, sizeof (*gregsetp)); | |
| } | |
| void | |
| fill_gregset (const struct regcache *regcache, | |
| gdb_gregset_t *gregsetp, int regno) | |
| { | |
| const struct regset *regset = ppc_linux_gregset (sizeof (long)); | |
| if (regno == -1) | |
| memset (gregsetp, 0, sizeof (*gregsetp)); | |
| ppc_collect_gregset (regset, regcache, regno, gregsetp, sizeof (*gregsetp)); | |
| } | |
| void | |
| supply_fpregset (struct regcache *regcache, const gdb_fpregset_t * fpregsetp) | |
| { | |
| const struct regset *regset = ppc_linux_fpregset (); | |
| ppc_supply_fpregset (regset, regcache, -1, | |
| fpregsetp, sizeof (*fpregsetp)); | |
| } | |
| void | |
| fill_fpregset (const struct regcache *regcache, | |
| gdb_fpregset_t *fpregsetp, int regno) | |
| { | |
| const struct regset *regset = ppc_linux_fpregset (); | |
| ppc_collect_fpregset (regset, regcache, regno, | |
| fpregsetp, sizeof (*fpregsetp)); | |
| } | |
| int | |
| ppc_linux_nat_target::auxv_parse (gdb_byte **readptr, | |
| gdb_byte *endptr, CORE_ADDR *typep, | |
| CORE_ADDR *valp) | |
| { | |
| int tid = inferior_ptid.lwp (); | |
| if (tid == 0) | |
| tid = inferior_ptid.pid (); | |
| int sizeof_auxv_field = ppc_linux_target_wordsize (tid); | |
| enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ()); | |
| gdb_byte *ptr = *readptr; | |
| if (endptr == ptr) | |
| return 0; | |
| if (endptr - ptr < sizeof_auxv_field * 2) | |
| return -1; | |
| *typep = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order); | |
| ptr += sizeof_auxv_field; | |
| *valp = extract_unsigned_integer (ptr, sizeof_auxv_field, byte_order); | |
| ptr += sizeof_auxv_field; | |
| *readptr = ptr; | |
| return 1; | |
| } | |
| const struct target_desc * | |
| ppc_linux_nat_target::read_description () | |
| { | |
| int tid = inferior_ptid.lwp (); | |
| if (tid == 0) | |
| tid = inferior_ptid.pid (); | |
| if (have_ptrace_getsetevrregs) | |
| { | |
| struct gdb_evrregset_t evrregset; | |
| if (ptrace (PTRACE_GETEVRREGS, tid, 0, &evrregset) >= 0) | |
| return tdesc_powerpc_e500l; | |
| /* EIO means that the PTRACE_GETEVRREGS request isn't supported. | |
| Anything else needs to be reported. */ | |
| else if (errno != EIO) | |
| perror_with_name (_("Unable to fetch SPE registers")); | |
| } | |
| struct ppc_linux_features features = ppc_linux_no_features; | |
| features.wordsize = ppc_linux_target_wordsize (tid); | |
| CORE_ADDR hwcap = linux_get_hwcap (current_top_target ()); | |
| CORE_ADDR hwcap2 = linux_get_hwcap2 (current_top_target ()); | |
| if (have_ptrace_getsetvsxregs | |
| && (hwcap & PPC_FEATURE_HAS_VSX)) | |
| { | |
| gdb_vsxregset_t vsxregset; | |
| if (ptrace (PTRACE_GETVSXREGS, tid, 0, &vsxregset) >= 0) | |
| features.vsx = true; | |
| /* EIO means that the PTRACE_GETVSXREGS request isn't supported. | |
| Anything else needs to be reported. */ | |
| else if (errno != EIO) | |
| perror_with_name (_("Unable to fetch VSX registers")); | |
| } | |
| if (have_ptrace_getvrregs | |
| && (hwcap & PPC_FEATURE_HAS_ALTIVEC)) | |
| { | |
| gdb_vrregset_t vrregset; | |
| if (ptrace (PTRACE_GETVRREGS, tid, 0, &vrregset) >= 0) | |
| features.altivec = true; | |
| /* EIO means that the PTRACE_GETVRREGS request isn't supported. | |
| Anything else needs to be reported. */ | |
| else if (errno != EIO) | |
| perror_with_name (_("Unable to fetch AltiVec registers")); | |
| } | |
| features.isa205 = ppc_linux_has_isa205 (hwcap); | |
| if ((hwcap2 & PPC_FEATURE2_DSCR) | |
| && check_regset (tid, NT_PPC_PPR, PPC_LINUX_SIZEOF_PPRREGSET) | |
| && check_regset (tid, NT_PPC_DSCR, PPC_LINUX_SIZEOF_DSCRREGSET)) | |
| { | |
| features.ppr_dscr = true; | |
| if ((hwcap2 & PPC_FEATURE2_ARCH_2_07) | |
| && (hwcap2 & PPC_FEATURE2_TAR) | |
| && (hwcap2 & PPC_FEATURE2_EBB) | |
| && check_regset (tid, NT_PPC_TAR, PPC_LINUX_SIZEOF_TARREGSET) | |
| && check_regset (tid, NT_PPC_EBB, PPC_LINUX_SIZEOF_EBBREGSET) | |
| && check_regset (tid, NT_PPC_PMU, PPC_LINUX_SIZEOF_PMUREGSET)) | |
| { | |
| features.isa207 = true; | |
| if ((hwcap2 & PPC_FEATURE2_HTM) | |
| && check_regset (tid, NT_PPC_TM_SPR, | |
| PPC_LINUX_SIZEOF_TM_SPRREGSET)) | |
| features.htm = true; | |
| } | |
| } | |
| return ppc_linux_match_description (features); | |
| } | |
| void | |
| _initialize_ppc_linux_nat (void) | |
| { | |
| linux_target = &the_ppc_linux_nat_target; | |
| gdb::observers::thread_exit.attach (ppc_linux_thread_exit); | |
| /* Register the target. */ | |
| add_inf_child_target (linux_target); | |
| } |