| 2015-03-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.ac: Revert the AM_ZLIB change. |
| * Makefile.in: Regenerated. |
| * aclocal.m4: Likewise. |
| * configure: Likewise. |
| |
| 2015-03-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (ZLIB): New. |
| (ZLIBINC): Likewise. |
| (AM_CFLAGS): Add $(ZLIBINC). |
| (readelf_LDADD): Add $(ZLIB). |
| * configure.ac (AM_ZLIB): Removed. |
| (zlibdir): New. AC_SUBST. |
| (zlibinc): Likewise. |
| Add --with-system-zlib. |
| * Makefile.in: Regenerated. |
| * config.in: Likewise. |
| * configure: Likewise. |
| |
| 2015-03-19 Nick Clifton <nickc@redhat.com> |
| |
| * readelf.c (get_machine_flags): Decode RL78's G13 and G14 flags. |
| |
| 2015-03-18 Jon Turney <jon.turney@dronecode.org.uk> |
| Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/18087 |
| * doc/binutils.texi: Note that when objcopy compresses debug |
| sections the compression is only performed if it makes the section |
| smaller. |
| |
| 2015-03-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/18101 |
| * readelf.c (parse_args): Move nothing to do warning to ... |
| (main): Here. |
| |
| 2015-03-10 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/18101 |
| * readelf.c (parse_args): Enhance check for nothing to do by |
| accounting for the --wide option. |
| |
| PR binutils/17636 |
| * objcopy.c (copy_object): Avoid calling fatal as that does not |
| allow the parent to clean up temporary files. |
| |
| 2015-03-10 Yuri Gribov <y.gribov@samsung.arm> |
| |
| PR ld/16572 |
| * readelf.c: Remove support for ELF_ARM_HASENTRY. |
| |
| 2015-03-05 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/18064 |
| * doc/binutils.texi (objcopy): Extend description of |
| --add-gnu-debuglink option to explain that the separate debug info |
| file must exist. Add a description of what to do if the debug |
| info file is built in one place but then installed into a separate |
| location. |
| |
| 2015-03-05 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17994 |
| * dlltool.c (temp_file_to_remove): New local array. |
| (unlink_temp_files): New functions - unlinks any file in the |
| temp_file_to_remove array, unless dotdeltemps is set. |
| (gen_exp_file): Add temp files to array. |
| (make_head): Likewise. |
| (make_delay_head): Likewise. |
| (make_tail): Likewise. |
| (gen_lib_file): Call unlink_temp_files. |
| |
| 2015-02-28 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * objcopy.c (update_sections): New list. |
| (command_line_switch): Add OPTION_UPDATE_SECTION. |
| (copy_options): Add update-section. |
| (copy_usage): Document new option. |
| (is_update_section): New function. |
| (is_strip_section_1): Add check for attempt to update and remove |
| the same section. |
| (copy_object): Update size and content of requested sections. |
| (skip_section): Don't copy for updated sections. |
| (copy_main): Handle --update-section. |
| * doc/binutils.texi (objcopy): Add description of --update-section |
| option. |
| * NEWS: Mention --update-section option. |
| |
| 2015-02-26 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * coffgrok.c (do_type): Check for an out of range tag index. |
| Check for integer overflow computing array dimension. |
| (do_define): Likewise. |
| |
| 2015-02-26 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * objcopy.c (init_section_add): Rename optarg to arg in order to |
| avoid shadowing a global variable. |
| |
| 2015-02-26 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * resrc.c (write_rc_messagetable): Tighten check for invalid |
| message lengths. |
| |
| * dwarf.c (display_debug_loc): Pacify the undefined behaviour |
| sanitizer by simplifying address difference calculation. |
| (struct Frame_Chunk): Change type of cfa_offset to dwarf_vma in |
| order to avoid arithmetic overflows. |
| (frame_display_row): Cast cfa_offset before printing it. |
| (display_debug_frames): Likewise. |
| Check for an unexpected segment size. |
| Chnage type of 'l' local to dwarf_vma and cast it back to an int |
| when printing. |
| (process_cu_tu_index): Tighten check for an invalid ncols value. |
| * readelf.c (process_corefile_note_segment): Check for |
| inote.descdata extending beyond the end of the section. |
| (process_v850_notes): Likewise. |
| |
| 2015-02-26 Terry Guo <terry.guo@arm.com> |
| |
| * readelf.c (arm_attr_tag_ABI_HardFP_use): Update how we |
| display it. |
| |
| 2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * objcopy.c (init_section_add): New function. |
| (section_add_load_file): New function. |
| (copy_main): Make use of new functions. |
| |
| 2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * od-elf32_avr.c: Add elf32-avr.h include. |
| (OPT_AVRPROP): Define. |
| (options[]): Add 'avr-prop' entry. |
| (elf32_avr_help): Add avr-prop help text. |
| (elf32_avr_dump_avr_prop): New function. |
| (elf32_avr_dump): Add check for avr-prop. |
| |
| 2015-02-24 Nick Clifton <nickc@redhat.com> |
| |
| * readelf.c (get_machine_flags): Remove deprecated V850 machine |
| flags. |
| (get_v850_section_type_name): New function. Handles V850 special |
| sections. |
| (get_section_type_name): Add support for V850. |
| (get_v850_elf_note_type): New function. Returns the name of a |
| V850 note. |
| (print_v850_note): New function. Prints a V850 note. |
| (process_v850_notes): New function. Prints V850 notes. |
| (process_note_sections): Add support for V850. |
| |
| 2015-02-24 Mike Frysinger <vapier@gentoo.org> |
| |
| PR binutils/17531 |
| * readelf.c (process_symbol_table): Declare chained. Increment it |
| in every loop. Abort when chained is larger than nchains. Move |
| error check outside of chain loop. |
| |
| 2015-02-24 Dmitry Antipov <dantipov@nvidia.com> |
| |
| * readelf.c (find_symbol_for_address): Use a binary search to |
| speed up symbol location. Skip check for function symbol type. |
| (*_unw_aux_info): Add funtab and nfuns fields contains a sorted |
| list of function symbols. |
| (dump_ia64_unwind): Initialise the funtab and nfuns fields and |
| pass them to find_symbol_for_address. |
| (dump_hppa_unwind): Likewise. |
| (arm_print_vma_and_name): Pass funtab to find_symbol_for_address. |
| (dump_arm_unwind): Initialise the funtab and nfuns fields. |
| |
| 2015-02-24 Nick Clifton <nickc@redhat.com> |
| |
| * objdump.c (dump_section): Extend the warning message displayed |
| when a section cannot be loaded. |
| |
| 2015-02-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * readelf.c (process_program_headers): Add newline to warning |
| message. |
| |
| 2015-02-20 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| |
| * readelf.c (get_note_type): Add NT_S390_VXRS_LOW and |
| NT_S390_VXRS_HIGH. |
| |
| 2015-02-13 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * dwarf.c (read_leb128): Fix test for shift becoming too large. |
| |
| * coffgrok.c (do_define): Add check for type size overflow. |
| * srconv.c (walk_tree_sfile): Check that enough sections are |
| available before parsing. |
| (prescan): Likewise. |
| |
| PR binutils/17531 |
| * dwarf.c (display_debug_aranges): Add check for an excessive |
| ar_length value. |
| (process_cu_tu_index): Check for a row * columns sum being too |
| large. |
| |
| 2015-02-13 Alan Modra <amodra@gmail.com> |
| |
| * dwarf.c: Formatting, whitespace. |
| (process_debug_info): Style fix. |
| |
| 2015-02-11 Nick Clifton <nickc@redhat.com> |
| |
| * rl78-decode.opc: Add 'a' attribute to instructions that support |
| [HL+0] addressing. |
| * rl78-decode.c: Regenerate. |
| * rl78-dis.c (print_insn_rl78): Display the offset in [HL+0] |
| addresses. |
| |
| 2015-02-11 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17531 |
| * dwarf.c (display_debug_pubnames_worker): Work around compiler |
| bug checking address ranges. |
| (display_debug_frames): Likewise. |
| (display_gdb_index): Likewise. |
| (process_cu_tu_index): Add range check on the ncols value. |
| |
| 2015-02-10 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * dwarf.c (eh_addr_size): Use an unsigned type. |
| (size_of_encoded_value): Return an unsigned type. |
| (read_leb128): Break if the shift becomes too big. |
| (process_extended_line_op): Do not read the address if the length |
| is too long. |
| (read_cie): Warn and fail if the pointer size or segment size are |
| too big. |
| * dwarf.h (DWARF2_External_LineInfo): Delete unused and incorrect |
| structure definition. |
| (DWARF2_External_PubNames): Likewise. |
| (DWARF2_External_CompUnit): Likewise. |
| (DWARF2_External_ARange): Likewise. |
| (DWARF2_Internal_LineInfo): Use dwarf_vma type for |
| li_prologue_length. |
| (eh_addr_size): Update prototype. |
| |
| PR binutils/17531 |
| * dwarf.c (process_debug_info): Zero the debug information array |
| since correct initialisation cannot be relied upon. |
| (process_cu_tu_index): Improve range checks. |
| |
| PR binutils/17531 |
| * dwarf.c (display_debug_pubnames_worker): Use dwarf_vma type for |
| offset. |
| * readelf.c (dump_relocations): Handle printing offsets which are |
| MIN_INT. |
| (process_corefile_note_segment): Add range check of the namesz |
| field. |
| |
| 2015-02-09 Mark Wielaard <mjw@redhat.com> |
| |
| * dwarf.c (read_and_display_attr_value): Handle DW_LANG_Fortran03 |
| and DW_LANG_Fortran08. |
| |
| 2015-02-06 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * dwarf.c (display_debug_frames): Fix range checks to work on |
| 32-bit binaries complied on a 64-bit host. |
| |
| PR binutils/17531 |
| * dwarf.c (xcmalloc): Fail if the arguments are too big. |
| (xcrealloc): Likewise. |
| (xcalloc2): Likewise. |
| * readelf.c (process_mips_specific): Fail if an option has an |
| invalid size. |
| |
| 2015-02-05 Alan Modra <amodra@gmail.com> |
| |
| PR binutils/17926 |
| * dwarf.c (dwarf_select_sections_by_letters): Don't refer to optarg. |
| |
| 2015-02-04 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17531 |
| * dwarf.c (read_and_display_attr_value): Test for a block length |
| being so long that it wraps around to before the start of the block. |
| (process_debug_info): Test for section_begin wrapping around to |
| before the start of the section. |
| (display_gdb_index): Test for num_cus being so large that the end |
| address wraps around to before the start of the section. |
| (process_cu_tu_index): Test for j being so large that the section |
| index pool wraps around to before the start of the section. |
| |
| 2015-02-03 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17531 |
| * dwarf.c (process_debug_info): Add range check. |
| (display_debug_pubnames_worker): Likewise. |
| (display_gdb_index): Fix range check. |
| (process_cu_tu_index): Add range check. |
| * readelf.c (get_data): Change parameter types from size_t to |
| bfd_size_type. Add checks for loss of accuracy when casting from |
| bfd_size_type to size_t. |
| (get_dynamic_data): Likewise. |
| (process_section_groups): Limit number of error messages. |
| |
| 2015-02-03 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * objdump.c (display_any_bfd): Fail if archives nest too deeply. |
| |
| 2015-01-28 James Bowman <james.bowman@ftdichip.com> |
| |
| * readelf.c: Add FT32 support. |
| |
| 2015-01-27 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * dlltool.c (identify_search_archive): If the last archive was the |
| same as the current archive, terminate the loop. |
| |
| * addr2line.c (slurp_symtab): If the symcount is zero, free the |
| symbol table pointer. |
| |
| * rcparse.y: Add checks to avoid integer divide by zero. |
| * rescoff.c (read_coff_rsrc): Add check on the size of the |
| resource section. |
| (read_coff_res_dir): Add check on the nesting level. |
| Check for resource names overrunning the buffer. |
| * resrc.c (write_rc_messagetable): Update formatting. |
| Add check of 'elen' being zero. |
| |
| 2015-01-23 Nick Clifton <nickc@redhat.com> |
| |
| * nlmconv.c (powerpc_mangle_relocs): Fix build errors introduced |
| by recent delta, when compiling on for a 32-bit host. |
| |
| 2015-01-21 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * addr2line.c (main): Call bfd_set_error_program_name. |
| * ar.c (main): Likewise. |
| * coffdump.c (main): Likewise. |
| * cxxfilt.c (main): Likewise. |
| * dlltool.c (main): Likewise. |
| * nlmconv.c (main): Likewise. |
| * nm.c (main): Likewise. |
| * objdump.c (main): Likewise. |
| * size.c (main): Likewise. |
| * srconv.c (main): Likewise. |
| * strings.c (main): Likewise. |
| * sysdump.c (main): Likewise. |
| * windmc.c (main): Likewise. |
| * windres.c (main): Likewise. |
| * objcopy.c (main): Likewise. |
| (copy_relocations_in_section): Check for relocs without associated |
| symbol pointers. |
| |
| 2015-01-21 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com> |
| |
| * MAINTAINERS: Add self to ARM maintainers list. |
| |
| 2015-01-21 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * coffgrok.c (do_type): Check that computed ref exists. |
| (doit): Add range checks when computing section for scope. |
| |
| 2015-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * dwarf.c (process_debug_info): Properly check abbrev size. |
| |
| 2015-01-12 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17531 |
| * dwarf.c (process_debug_info): Check for abbrev_base being larger |
| than the section size. |
| (process_cu_tu_index): Use xcalloc2 to allocate the CU and TU |
| arrays. |
| (xcalloc2): New function. Like xcalloc, but checks for overflow. |
| (display_debug_addr): Use xcalloc to allocate the debug_addr_info |
| array. Check for an address_base that is too large. |
| |
| * dwarf.h (xcalloc2): Prototype. |
| |
| 2015-01-12 Alan Modra <amodra@gmail.com> |
| |
| * prdbg.c (print_debugging_info): Don't use void* for function |
| pointer param. |
| * budbg.h (print_debugging_info): Update prototype. |
| |
| 2015-01-08 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * ojcopy.c (copy_object): Free the symbol table if no symbols |
| could be loaded. |
| (copy_file): Use bfd_close_all_done to close files that could not |
| be copied. |
| |
| * sysdump.c (getINT): Fail if reading off the end of the buffer. |
| Replace call to abort with a call to fatal. |
| (getCHARS): Prevetn reading off the end of the buffer. |
| |
| * nlmconv.c (i386_mangle_relocs): Skip relocs without an |
| associated symbol. |
| (powerpc_mangle_relocs): Skip unrecognised relocs. Check address |
| range before applying a reloc. |
| |
| 2015-01-07 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * dlltool.c (scan_obj_file): Break loop if the last archive |
| displayed matches the current archive. |
| |
| * objdump.c (display_any_bfd): Add a depth limit to nested archive |
| display in order to avoid infinite loops. |
| * srconv.c: Replace calls to abort with calls to fatal with an |
| error message. |
| |
| 2015-01-06 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * coffdump.c (dump_coff_section): Check for a symbol being |
| available before printing its name. |
| (main): Check the return value from coff_grok. |
| * coffgrok.c: Reformat and tidy. |
| Add range checks to most functions. |
| (coff_grok): Return NULL if the input bfd is not in a COFF |
| format. |
| * coffgrok.h: Reformat and tidy. |
| (struct coff_section): Change the nrelocs field to unsigned. |
| * srconv.c (main): Check the return value from coff_grok. |
| |
| 2015-01-05 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * nm.c (print_symbol): Add 'is_synthetic' parameter. Use it to |
| help initialize the info.elfinfo field. |
| (print_size_symbols): Add 'synth_count' parameter. Use it to set |
| the is_synthetic parameter when calling print_symbol. |
| (print_symbols): Likewise. |
| (display_rel_file): Pass synth_count to printing function. |
| (display_archive): Break loop if the last archive displayed |
| matches the current archive. |
| * size.c (display_archive): Likewise. |
| |
| 2015-01-05 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17531 |
| * dwarf.c (alloc_num_debug_info_entries): New variable. |
| (process_debug_info): Set it. Use it to avoid displaying |
| attributes for which there is no info. |
| (display_debug_abbrev): Check that the debug_info_entry index is |
| valid before using it. |
| (display_loc_list_dwo): Likewise. |
| (process_cu_tu_index): Add range check for an overlarge dw_sect |
| value. |
| (free_debug_memory): Reset alloc_num_debug_info_entries. |
| * readelf.c (slurp_ia64_unwind_table): Warn if the reloc could not |
| be indentified. |
| (dynamic_section_mips_val): Warn if the timestamp is invalid. |
| (print_mips_got_entry): Add a data_end parameter. Warn if a read |
| would go beyond the end of the data, and return an error value. |
| (process_mips_specific): Do not read options from beyond the end |
| of the section. |
| Correct code to display optional data at the end of an option. |
| Warn if there are too many GOT symbols. |
| Update calls to print_mips_got_entry, and handle error returns. |
| |
| 2015-01-05 Daniel Klauer <daniel.c.klauer@web.de> |
| |
| PR binutils/17489 |
| * doc/binutils.texi (dlltool): Correct description of --kill-at |
| option. |
| |
| 2015-01-01 Alan Modra <amodra@gmail.com> |
| |
| * version.c (print_version): Just print current year. |
| |
| 2015-01-01 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| For older changes see ChangeLog-2014 |
| |
| Copyright (C) 2015 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
