|  | /* Low-level child interface to ptrace. | 
|  |  | 
|  | Copyright (C) 1988-2016 Free Software Foundation, Inc. | 
|  |  | 
|  | This file is part of GDB. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 3 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program.  If not, see <http://www.gnu.org/licenses/>.  */ | 
|  |  | 
|  | #include "defs.h" | 
|  | #include "command.h" | 
|  | #include "inferior.h" | 
|  | #include "inflow.h" | 
|  | #include "terminal.h" | 
|  | #include "gdbcore.h" | 
|  | #include "regcache.h" | 
|  | #include "nat/gdb_ptrace.h" | 
|  | #include "gdb_wait.h" | 
|  | #include <signal.h> | 
|  |  | 
|  | #include "inf-ptrace.h" | 
|  | #include "inf-child.h" | 
|  | #include "gdbthread.h" | 
|  |  | 
|  |  | 
|  |  | 
|  | #ifdef PT_GET_PROCESS_STATE | 
|  |  | 
|  | /* Target hook for follow_fork.  On entry and at return inferior_ptid is | 
|  | the ptid of the followed inferior.  */ | 
|  |  | 
|  | static int | 
|  | inf_ptrace_follow_fork (struct target_ops *ops, int follow_child, | 
|  | int detach_fork) | 
|  | { | 
|  | if (!follow_child) | 
|  | { | 
|  | struct thread_info *tp = inferior_thread (); | 
|  | pid_t child_pid = ptid_get_pid (tp->pending_follow.value.related_pid); | 
|  |  | 
|  | /* Breakpoints have already been detached from the child by | 
|  | infrun.c.  */ | 
|  |  | 
|  | if (ptrace (PT_DETACH, child_pid, (PTRACE_TYPE_ARG3)1, 0) == -1) | 
|  | perror_with_name (("ptrace")); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | inf_ptrace_insert_fork_catchpoint (struct target_ops *self, int pid) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | inf_ptrace_remove_fork_catchpoint (struct target_ops *self, int pid) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* PT_GET_PROCESS_STATE */ | 
|  |  | 
|  |  | 
|  | /* Prepare to be traced.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_me (void) | 
|  | { | 
|  | /* "Trace me, Dr. Memory!"  */ | 
|  | ptrace (PT_TRACE_ME, 0, (PTRACE_TYPE_ARG3)0, 0); | 
|  | } | 
|  |  | 
|  | /* Start a new inferior Unix child process.  EXEC_FILE is the file to | 
|  | run, ALLARGS is a string containing the arguments to the program. | 
|  | ENV is the environment vector to pass.  If FROM_TTY is non-zero, be | 
|  | chatty about it.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_create_inferior (struct target_ops *ops, | 
|  | char *exec_file, char *allargs, char **env, | 
|  | int from_tty) | 
|  | { | 
|  | int pid; | 
|  |  | 
|  | /* Do not change either targets above or the same target if already present. | 
|  | The reason is the target stack is shared across multiple inferiors.  */ | 
|  | int ops_already_pushed = target_is_pushed (ops); | 
|  | struct cleanup *back_to = make_cleanup (null_cleanup, NULL); | 
|  |  | 
|  | if (! ops_already_pushed) | 
|  | { | 
|  | /* Clear possible core file with its process_stratum.  */ | 
|  | push_target (ops); | 
|  | make_cleanup_unpush_target (ops); | 
|  | } | 
|  |  | 
|  | pid = fork_inferior (exec_file, allargs, env, inf_ptrace_me, NULL, | 
|  | NULL, NULL, NULL); | 
|  |  | 
|  | discard_cleanups (back_to); | 
|  |  | 
|  | startup_inferior (START_INFERIOR_TRAPS_EXPECTED); | 
|  |  | 
|  | /* On some targets, there must be some explicit actions taken after | 
|  | the inferior has been started up.  */ | 
|  | target_post_startup_inferior (pid_to_ptid (pid)); | 
|  | } | 
|  |  | 
|  | #ifdef PT_GET_PROCESS_STATE | 
|  |  | 
|  | static void | 
|  | inf_ptrace_post_startup_inferior (struct target_ops *self, ptid_t pid) | 
|  | { | 
|  | ptrace_event_t pe; | 
|  |  | 
|  | /* Set the initial event mask.  */ | 
|  | memset (&pe, 0, sizeof pe); | 
|  | pe.pe_set_event |= PTRACE_FORK; | 
|  | if (ptrace (PT_SET_EVENT_MASK, ptid_get_pid (pid), | 
|  | (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1) | 
|  | perror_with_name (("ptrace")); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* Clean up a rotting corpse of an inferior after it died.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_mourn_inferior (struct target_ops *ops) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | /* Wait just one more time to collect the inferior's exit status. | 
|  | Do not check whether this succeeds though, since we may be | 
|  | dealing with a process that we attached to.  Such a process will | 
|  | only report its exit status to its original parent.  */ | 
|  | waitpid (ptid_get_pid (inferior_ptid), &status, 0); | 
|  |  | 
|  | inf_child_mourn_inferior (ops); | 
|  | } | 
|  |  | 
|  | /* Attach to the process specified by ARGS.  If FROM_TTY is non-zero, | 
|  | be chatty about it.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_attach (struct target_ops *ops, const char *args, int from_tty) | 
|  | { | 
|  | char *exec_file; | 
|  | pid_t pid; | 
|  | struct inferior *inf; | 
|  |  | 
|  | /* Do not change either targets above or the same target if already present. | 
|  | The reason is the target stack is shared across multiple inferiors.  */ | 
|  | int ops_already_pushed = target_is_pushed (ops); | 
|  | struct cleanup *back_to = make_cleanup (null_cleanup, NULL); | 
|  |  | 
|  | pid = parse_pid_to_attach (args); | 
|  |  | 
|  | if (pid == getpid ())		/* Trying to masturbate?  */ | 
|  | error (_("I refuse to debug myself!")); | 
|  |  | 
|  | if (! ops_already_pushed) | 
|  | { | 
|  | /* target_pid_to_str already uses the target.  Also clear possible core | 
|  | file with its process_stratum.  */ | 
|  | push_target (ops); | 
|  | make_cleanup_unpush_target (ops); | 
|  | } | 
|  |  | 
|  | if (from_tty) | 
|  | { | 
|  | exec_file = get_exec_file (0); | 
|  |  | 
|  | if (exec_file) | 
|  | printf_unfiltered (_("Attaching to program: %s, %s\n"), exec_file, | 
|  | target_pid_to_str (pid_to_ptid (pid))); | 
|  | else | 
|  | printf_unfiltered (_("Attaching to %s\n"), | 
|  | target_pid_to_str (pid_to_ptid (pid))); | 
|  |  | 
|  | gdb_flush (gdb_stdout); | 
|  | } | 
|  |  | 
|  | #ifdef PT_ATTACH | 
|  | errno = 0; | 
|  | ptrace (PT_ATTACH, pid, (PTRACE_TYPE_ARG3)0, 0); | 
|  | if (errno != 0) | 
|  | perror_with_name (("ptrace")); | 
|  | #else | 
|  | error (_("This system does not support attaching to a process")); | 
|  | #endif | 
|  |  | 
|  | inf = current_inferior (); | 
|  | inferior_appeared (inf, pid); | 
|  | inf->attach_flag = 1; | 
|  | inferior_ptid = pid_to_ptid (pid); | 
|  |  | 
|  | /* Always add a main thread.  If some target extends the ptrace | 
|  | target, it should decorate the ptid later with more info.  */ | 
|  | add_thread_silent (inferior_ptid); | 
|  |  | 
|  | discard_cleanups (back_to); | 
|  | } | 
|  |  | 
|  | #ifdef PT_GET_PROCESS_STATE | 
|  |  | 
|  | static void | 
|  | inf_ptrace_post_attach (struct target_ops *self, int pid) | 
|  | { | 
|  | ptrace_event_t pe; | 
|  |  | 
|  | /* Set the initial event mask.  */ | 
|  | memset (&pe, 0, sizeof pe); | 
|  | pe.pe_set_event |= PTRACE_FORK; | 
|  | if (ptrace (PT_SET_EVENT_MASK, pid, | 
|  | (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1) | 
|  | perror_with_name (("ptrace")); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* Detach from the inferior, optionally passing it the signal | 
|  | specified by ARGS.  If FROM_TTY is non-zero, be chatty about it.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_detach (struct target_ops *ops, const char *args, int from_tty) | 
|  | { | 
|  | pid_t pid = ptid_get_pid (inferior_ptid); | 
|  | int sig = 0; | 
|  |  | 
|  | if (from_tty) | 
|  | { | 
|  | char *exec_file = get_exec_file (0); | 
|  | if (exec_file == 0) | 
|  | exec_file = ""; | 
|  | printf_unfiltered (_("Detaching from program: %s, %s\n"), exec_file, | 
|  | target_pid_to_str (pid_to_ptid (pid))); | 
|  | gdb_flush (gdb_stdout); | 
|  | } | 
|  | if (args) | 
|  | sig = atoi (args); | 
|  |  | 
|  | #ifdef PT_DETACH | 
|  | /* We'd better not have left any breakpoints in the program or it'll | 
|  | die when it hits one.  Also note that this may only work if we | 
|  | previously attached to the inferior.  It *might* work if we | 
|  | started the process ourselves.  */ | 
|  | errno = 0; | 
|  | ptrace (PT_DETACH, pid, (PTRACE_TYPE_ARG3)1, sig); | 
|  | if (errno != 0) | 
|  | perror_with_name (("ptrace")); | 
|  | #else | 
|  | error (_("This system does not support detaching from a process")); | 
|  | #endif | 
|  |  | 
|  | inferior_ptid = null_ptid; | 
|  | detach_inferior (pid); | 
|  |  | 
|  | inf_child_maybe_unpush_target (ops); | 
|  | } | 
|  |  | 
|  | /* Kill the inferior.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_kill (struct target_ops *ops) | 
|  | { | 
|  | pid_t pid = ptid_get_pid (inferior_ptid); | 
|  | int status; | 
|  |  | 
|  | if (pid == 0) | 
|  | return; | 
|  |  | 
|  | ptrace (PT_KILL, pid, (PTRACE_TYPE_ARG3)0, 0); | 
|  | waitpid (pid, &status, 0); | 
|  |  | 
|  | target_mourn_inferior (); | 
|  | } | 
|  |  | 
|  | /* Interrupt the inferior.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_interrupt (struct target_ops *self, ptid_t ptid) | 
|  | { | 
|  | /* Send a SIGINT to the process group.  This acts just like the user | 
|  | typed a ^C on the controlling terminal.  Note that using a | 
|  | negative process number in kill() is a System V-ism.  The proper | 
|  | BSD interface is killpg().  However, all modern BSDs support the | 
|  | System V interface too.  */ | 
|  | kill (-inferior_process_group (), SIGINT); | 
|  | } | 
|  |  | 
|  | /* Return which PID to pass to ptrace in order to observe/control the | 
|  | tracee identified by PTID.  */ | 
|  |  | 
|  | pid_t | 
|  | get_ptrace_pid (ptid_t ptid) | 
|  | { | 
|  | pid_t pid; | 
|  |  | 
|  | /* If we have an LWPID to work with, use it.  Otherwise, we're | 
|  | dealing with a non-threaded program/target.  */ | 
|  | pid = ptid_get_lwp (ptid); | 
|  | if (pid == 0) | 
|  | pid = ptid_get_pid (ptid); | 
|  | return pid; | 
|  | } | 
|  |  | 
|  | /* Resume execution of thread PTID, or all threads if PTID is -1.  If | 
|  | STEP is nonzero, single-step it.  If SIGNAL is nonzero, give it | 
|  | that signal.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_resume (struct target_ops *ops, | 
|  | ptid_t ptid, int step, enum gdb_signal signal) | 
|  | { | 
|  | pid_t pid; | 
|  | int request; | 
|  |  | 
|  | if (ptid_equal (minus_one_ptid, ptid)) | 
|  | /* Resume all threads.  Traditionally ptrace() only supports | 
|  | single-threaded processes, so simply resume the inferior.  */ | 
|  | pid = ptid_get_pid (inferior_ptid); | 
|  | else | 
|  | pid = get_ptrace_pid (ptid); | 
|  |  | 
|  | if (catch_syscall_enabled () > 0) | 
|  | request = PT_SYSCALL; | 
|  | else | 
|  | request = PT_CONTINUE; | 
|  |  | 
|  | if (step) | 
|  | { | 
|  | /* If this system does not support PT_STEP, a higher level | 
|  | function will have called single_step() to transmute the step | 
|  | request into a continue request (by setting breakpoints on | 
|  | all possible successor instructions), so we don't have to | 
|  | worry about that here.  */ | 
|  | request = PT_STEP; | 
|  | } | 
|  |  | 
|  | /* An address of (PTRACE_TYPE_ARG3)1 tells ptrace to continue from | 
|  | where it was.  If GDB wanted it to start some other way, we have | 
|  | already written a new program counter value to the child.  */ | 
|  | errno = 0; | 
|  | ptrace (request, pid, (PTRACE_TYPE_ARG3)1, gdb_signal_to_host (signal)); | 
|  | if (errno != 0) | 
|  | perror_with_name (("ptrace")); | 
|  | } | 
|  |  | 
|  | /* Wait for the child specified by PTID to do something.  Return the | 
|  | process ID of the child, or MINUS_ONE_PTID in case of error; store | 
|  | the status in *OURSTATUS.  */ | 
|  |  | 
|  | static ptid_t | 
|  | inf_ptrace_wait (struct target_ops *ops, | 
|  | ptid_t ptid, struct target_waitstatus *ourstatus, int options) | 
|  | { | 
|  | pid_t pid; | 
|  | int status, save_errno; | 
|  |  | 
|  | do | 
|  | { | 
|  | set_sigint_trap (); | 
|  |  | 
|  | do | 
|  | { | 
|  | pid = waitpid (ptid_get_pid (ptid), &status, 0); | 
|  | save_errno = errno; | 
|  | } | 
|  | while (pid == -1 && errno == EINTR); | 
|  |  | 
|  | clear_sigint_trap (); | 
|  |  | 
|  | if (pid == -1) | 
|  | { | 
|  | fprintf_unfiltered (gdb_stderr, | 
|  | _("Child process unexpectedly missing: %s.\n"), | 
|  | safe_strerror (save_errno)); | 
|  |  | 
|  | /* Claim it exited with unknown signal.  */ | 
|  | ourstatus->kind = TARGET_WAITKIND_SIGNALLED; | 
|  | ourstatus->value.sig = GDB_SIGNAL_UNKNOWN; | 
|  | return inferior_ptid; | 
|  | } | 
|  |  | 
|  | /* Ignore terminated detached child processes.  */ | 
|  | if (!WIFSTOPPED (status) && pid != ptid_get_pid (inferior_ptid)) | 
|  | pid = -1; | 
|  | } | 
|  | while (pid == -1); | 
|  |  | 
|  | #ifdef PT_GET_PROCESS_STATE | 
|  | if (WIFSTOPPED (status)) | 
|  | { | 
|  | ptrace_state_t pe; | 
|  | pid_t fpid; | 
|  |  | 
|  | if (ptrace (PT_GET_PROCESS_STATE, pid, | 
|  | (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1) | 
|  | perror_with_name (("ptrace")); | 
|  |  | 
|  | switch (pe.pe_report_event) | 
|  | { | 
|  | case PTRACE_FORK: | 
|  | ourstatus->kind = TARGET_WAITKIND_FORKED; | 
|  | ourstatus->value.related_pid = pid_to_ptid (pe.pe_other_pid); | 
|  |  | 
|  | /* Make sure the other end of the fork is stopped too.  */ | 
|  | fpid = waitpid (pe.pe_other_pid, &status, 0); | 
|  | if (fpid == -1) | 
|  | perror_with_name (("waitpid")); | 
|  |  | 
|  | if (ptrace (PT_GET_PROCESS_STATE, fpid, | 
|  | (PTRACE_TYPE_ARG3)&pe, sizeof pe) == -1) | 
|  | perror_with_name (("ptrace")); | 
|  |  | 
|  | gdb_assert (pe.pe_report_event == PTRACE_FORK); | 
|  | gdb_assert (pe.pe_other_pid == pid); | 
|  | if (fpid == ptid_get_pid (inferior_ptid)) | 
|  | { | 
|  | ourstatus->value.related_pid = pid_to_ptid (pe.pe_other_pid); | 
|  | return pid_to_ptid (fpid); | 
|  | } | 
|  |  | 
|  | return pid_to_ptid (pid); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | store_waitstatus (ourstatus, status); | 
|  | return pid_to_ptid (pid); | 
|  | } | 
|  |  | 
|  | /* Implement the to_xfer_partial target_ops method.  */ | 
|  |  | 
|  | static enum target_xfer_status | 
|  | inf_ptrace_xfer_partial (struct target_ops *ops, enum target_object object, | 
|  | const char *annex, gdb_byte *readbuf, | 
|  | const gdb_byte *writebuf, | 
|  | ULONGEST offset, ULONGEST len, ULONGEST *xfered_len) | 
|  | { | 
|  | pid_t pid = ptid_get_pid (inferior_ptid); | 
|  |  | 
|  | switch (object) | 
|  | { | 
|  | case TARGET_OBJECT_MEMORY: | 
|  | #ifdef PT_IO | 
|  | /* OpenBSD 3.1, NetBSD 1.6 and FreeBSD 5.0 have a new PT_IO | 
|  | request that promises to be much more efficient in reading | 
|  | and writing data in the traced process's address space.  */ | 
|  | { | 
|  | struct ptrace_io_desc piod; | 
|  |  | 
|  | /* NOTE: We assume that there are no distinct address spaces | 
|  | for instruction and data.  However, on OpenBSD 3.9 and | 
|  | later, PIOD_WRITE_D doesn't allow changing memory that's | 
|  | mapped read-only.  Since most code segments will be | 
|  | read-only, using PIOD_WRITE_D will prevent us from | 
|  | inserting breakpoints, so we use PIOD_WRITE_I instead.  */ | 
|  | piod.piod_op = writebuf ? PIOD_WRITE_I : PIOD_READ_D; | 
|  | piod.piod_addr = writebuf ? (void *) writebuf : readbuf; | 
|  | piod.piod_offs = (void *) (long) offset; | 
|  | piod.piod_len = len; | 
|  |  | 
|  | errno = 0; | 
|  | if (ptrace (PT_IO, pid, (caddr_t)&piod, 0) == 0) | 
|  | { | 
|  | /* Return the actual number of bytes read or written.  */ | 
|  | *xfered_len = piod.piod_len; | 
|  | return (piod.piod_len == 0) ? TARGET_XFER_EOF : TARGET_XFER_OK; | 
|  | } | 
|  | /* If the PT_IO request is somehow not supported, fallback on | 
|  | using PT_WRITE_D/PT_READ_D.  Otherwise we will return zero | 
|  | to indicate failure.  */ | 
|  | if (errno != EINVAL) | 
|  | return TARGET_XFER_EOF; | 
|  | } | 
|  | #endif | 
|  | { | 
|  | union | 
|  | { | 
|  | PTRACE_TYPE_RET word; | 
|  | gdb_byte byte[sizeof (PTRACE_TYPE_RET)]; | 
|  | } buffer; | 
|  | ULONGEST rounded_offset; | 
|  | ULONGEST partial_len; | 
|  |  | 
|  | /* Round the start offset down to the next long word | 
|  | boundary.  */ | 
|  | rounded_offset = offset & -(ULONGEST) sizeof (PTRACE_TYPE_RET); | 
|  |  | 
|  | /* Since ptrace will transfer a single word starting at that | 
|  | rounded_offset the partial_len needs to be adjusted down to | 
|  | that (remember this function only does a single transfer). | 
|  | Should the required length be even less, adjust it down | 
|  | again.  */ | 
|  | partial_len = (rounded_offset + sizeof (PTRACE_TYPE_RET)) - offset; | 
|  | if (partial_len > len) | 
|  | partial_len = len; | 
|  |  | 
|  | if (writebuf) | 
|  | { | 
|  | /* If OFFSET:PARTIAL_LEN is smaller than | 
|  | ROUNDED_OFFSET:WORDSIZE then a read/modify write will | 
|  | be needed.  Read in the entire word.  */ | 
|  | if (rounded_offset < offset | 
|  | || (offset + partial_len | 
|  | < rounded_offset + sizeof (PTRACE_TYPE_RET))) | 
|  | /* Need part of initial word -- fetch it.  */ | 
|  | buffer.word = ptrace (PT_READ_I, pid, | 
|  | (PTRACE_TYPE_ARG3)(uintptr_t) | 
|  | rounded_offset, 0); | 
|  |  | 
|  | /* Copy data to be written over corresponding part of | 
|  | buffer.  */ | 
|  | memcpy (buffer.byte + (offset - rounded_offset), | 
|  | writebuf, partial_len); | 
|  |  | 
|  | errno = 0; | 
|  | ptrace (PT_WRITE_D, pid, | 
|  | (PTRACE_TYPE_ARG3)(uintptr_t)rounded_offset, | 
|  | buffer.word); | 
|  | if (errno) | 
|  | { | 
|  | /* Using the appropriate one (I or D) is necessary for | 
|  | Gould NP1, at least.  */ | 
|  | errno = 0; | 
|  | ptrace (PT_WRITE_I, pid, | 
|  | (PTRACE_TYPE_ARG3)(uintptr_t)rounded_offset, | 
|  | buffer.word); | 
|  | if (errno) | 
|  | return TARGET_XFER_EOF; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (readbuf) | 
|  | { | 
|  | errno = 0; | 
|  | buffer.word = ptrace (PT_READ_I, pid, | 
|  | (PTRACE_TYPE_ARG3)(uintptr_t)rounded_offset, | 
|  | 0); | 
|  | if (errno) | 
|  | return TARGET_XFER_EOF; | 
|  | /* Copy appropriate bytes out of the buffer.  */ | 
|  | memcpy (readbuf, buffer.byte + (offset - rounded_offset), | 
|  | partial_len); | 
|  | } | 
|  |  | 
|  | *xfered_len = partial_len; | 
|  | return TARGET_XFER_OK; | 
|  | } | 
|  |  | 
|  | case TARGET_OBJECT_UNWIND_TABLE: | 
|  | return TARGET_XFER_E_IO; | 
|  |  | 
|  | case TARGET_OBJECT_AUXV: | 
|  | #if defined (PT_IO) && defined (PIOD_READ_AUXV) | 
|  | /* OpenBSD 4.5 has a new PIOD_READ_AUXV operation for the PT_IO | 
|  | request that allows us to read the auxilliary vector.  Other | 
|  | BSD's may follow if they feel the need to support PIE.  */ | 
|  | { | 
|  | struct ptrace_io_desc piod; | 
|  |  | 
|  | if (writebuf) | 
|  | return TARGET_XFER_E_IO; | 
|  | piod.piod_op = PIOD_READ_AUXV; | 
|  | piod.piod_addr = readbuf; | 
|  | piod.piod_offs = (void *) (long) offset; | 
|  | piod.piod_len = len; | 
|  |  | 
|  | errno = 0; | 
|  | if (ptrace (PT_IO, pid, (caddr_t)&piod, 0) == 0) | 
|  | { | 
|  | /* Return the actual number of bytes read or written.  */ | 
|  | *xfered_len = piod.piod_len; | 
|  | return (piod.piod_len == 0) ? TARGET_XFER_EOF : TARGET_XFER_OK; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | return TARGET_XFER_E_IO; | 
|  |  | 
|  | case TARGET_OBJECT_WCOOKIE: | 
|  | return TARGET_XFER_E_IO; | 
|  |  | 
|  | default: | 
|  | return TARGET_XFER_E_IO; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Return non-zero if the thread specified by PTID is alive.  */ | 
|  |  | 
|  | static int | 
|  | inf_ptrace_thread_alive (struct target_ops *ops, ptid_t ptid) | 
|  | { | 
|  | /* ??? Is kill the right way to do this?  */ | 
|  | return (kill (ptid_get_pid (ptid), 0) != -1); | 
|  | } | 
|  |  | 
|  | /* Print status information about what we're accessing.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_files_info (struct target_ops *ignore) | 
|  | { | 
|  | struct inferior *inf = current_inferior (); | 
|  |  | 
|  | printf_filtered (_("\tUsing the running image of %s %s.\n"), | 
|  | inf->attach_flag ? "attached" : "child", | 
|  | target_pid_to_str (inferior_ptid)); | 
|  | } | 
|  |  | 
|  | static char * | 
|  | inf_ptrace_pid_to_str (struct target_ops *ops, ptid_t ptid) | 
|  | { | 
|  | return normal_pid_to_str (ptid); | 
|  | } | 
|  |  | 
|  | #if defined (PT_IO) && defined (PIOD_READ_AUXV) | 
|  |  | 
|  | /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR. | 
|  | Return 0 if *READPTR is already at the end of the buffer. | 
|  | Return -1 if there is insufficient buffer for a whole entry. | 
|  | Return 1 if an entry was read into *TYPEP and *VALP.  */ | 
|  |  | 
|  | static int | 
|  | inf_ptrace_auxv_parse (struct target_ops *ops, gdb_byte **readptr, | 
|  | gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp) | 
|  | { | 
|  | struct type *int_type = builtin_type (target_gdbarch ())->builtin_int; | 
|  | struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr; | 
|  | const int sizeof_auxv_type = TYPE_LENGTH (int_type); | 
|  | const int sizeof_auxv_val = TYPE_LENGTH (ptr_type); | 
|  | enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ()); | 
|  | gdb_byte *ptr = *readptr; | 
|  |  | 
|  | if (endptr == ptr) | 
|  | return 0; | 
|  |  | 
|  | if (endptr - ptr < 2 * sizeof_auxv_val) | 
|  | return -1; | 
|  |  | 
|  | *typep = extract_unsigned_integer (ptr, sizeof_auxv_type, byte_order); | 
|  | ptr += sizeof_auxv_val;	/* Alignment.  */ | 
|  | *valp = extract_unsigned_integer (ptr, sizeof_auxv_val, byte_order); | 
|  | ptr += sizeof_auxv_val; | 
|  |  | 
|  | *readptr = ptr; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* Create a prototype ptrace target.  The client can override it with | 
|  | local methods.  */ | 
|  |  | 
|  | struct target_ops * | 
|  | inf_ptrace_target (void) | 
|  | { | 
|  | struct target_ops *t = inf_child_target (); | 
|  |  | 
|  | t->to_attach = inf_ptrace_attach; | 
|  | t->to_detach = inf_ptrace_detach; | 
|  | t->to_resume = inf_ptrace_resume; | 
|  | t->to_wait = inf_ptrace_wait; | 
|  | t->to_files_info = inf_ptrace_files_info; | 
|  | t->to_kill = inf_ptrace_kill; | 
|  | t->to_create_inferior = inf_ptrace_create_inferior; | 
|  | #ifdef PT_GET_PROCESS_STATE | 
|  | t->to_follow_fork = inf_ptrace_follow_fork; | 
|  | t->to_insert_fork_catchpoint = inf_ptrace_insert_fork_catchpoint; | 
|  | t->to_remove_fork_catchpoint = inf_ptrace_remove_fork_catchpoint; | 
|  | t->to_post_startup_inferior = inf_ptrace_post_startup_inferior; | 
|  | t->to_post_attach = inf_ptrace_post_attach; | 
|  | #endif | 
|  | t->to_mourn_inferior = inf_ptrace_mourn_inferior; | 
|  | t->to_thread_alive = inf_ptrace_thread_alive; | 
|  | t->to_pid_to_str = inf_ptrace_pid_to_str; | 
|  | t->to_interrupt = inf_ptrace_interrupt; | 
|  | t->to_xfer_partial = inf_ptrace_xfer_partial; | 
|  | #if defined (PT_IO) && defined (PIOD_READ_AUXV) | 
|  | t->to_auxv_parse = inf_ptrace_auxv_parse; | 
|  | #endif | 
|  |  | 
|  | return t; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Pointer to a function that returns the offset within the user area | 
|  | where a particular register is stored.  */ | 
|  | static CORE_ADDR (*inf_ptrace_register_u_offset)(struct gdbarch *, int, int); | 
|  |  | 
|  | /* Fetch register REGNUM from the inferior.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_fetch_register (struct regcache *regcache, int regnum) | 
|  | { | 
|  | struct gdbarch *gdbarch = get_regcache_arch (regcache); | 
|  | CORE_ADDR addr; | 
|  | size_t size; | 
|  | PTRACE_TYPE_RET *buf; | 
|  | int pid, i; | 
|  |  | 
|  | /* This isn't really an address, but ptrace thinks of it as one.  */ | 
|  | addr = inf_ptrace_register_u_offset (gdbarch, regnum, 0); | 
|  | if (addr == (CORE_ADDR)-1 | 
|  | || gdbarch_cannot_fetch_register (gdbarch, regnum)) | 
|  | { | 
|  | regcache_raw_supply (regcache, regnum, NULL); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Cater for systems like GNU/Linux, that implement threads as | 
|  | separate processes.  */ | 
|  | pid = ptid_get_lwp (inferior_ptid); | 
|  | if (pid == 0) | 
|  | pid = ptid_get_pid (inferior_ptid); | 
|  |  | 
|  | size = register_size (gdbarch, regnum); | 
|  | gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0); | 
|  | buf = (PTRACE_TYPE_RET *) alloca (size); | 
|  |  | 
|  | /* Read the register contents from the inferior a chunk at a time.  */ | 
|  | for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++) | 
|  | { | 
|  | errno = 0; | 
|  | buf[i] = ptrace (PT_READ_U, pid, (PTRACE_TYPE_ARG3)(uintptr_t)addr, 0); | 
|  | if (errno != 0) | 
|  | error (_("Couldn't read register %s (#%d): %s."), | 
|  | gdbarch_register_name (gdbarch, regnum), | 
|  | regnum, safe_strerror (errno)); | 
|  |  | 
|  | addr += sizeof (PTRACE_TYPE_RET); | 
|  | } | 
|  | regcache_raw_supply (regcache, regnum, buf); | 
|  | } | 
|  |  | 
|  | /* Fetch register REGNUM from the inferior.  If REGNUM is -1, do this | 
|  | for all registers.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_fetch_registers (struct target_ops *ops, | 
|  | struct regcache *regcache, int regnum) | 
|  | { | 
|  | if (regnum == -1) | 
|  | for (regnum = 0; | 
|  | regnum < gdbarch_num_regs (get_regcache_arch (regcache)); | 
|  | regnum++) | 
|  | inf_ptrace_fetch_register (regcache, regnum); | 
|  | else | 
|  | inf_ptrace_fetch_register (regcache, regnum); | 
|  | } | 
|  |  | 
|  | /* Store register REGNUM into the inferior.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_store_register (const struct regcache *regcache, int regnum) | 
|  | { | 
|  | struct gdbarch *gdbarch = get_regcache_arch (regcache); | 
|  | CORE_ADDR addr; | 
|  | size_t size; | 
|  | PTRACE_TYPE_RET *buf; | 
|  | int pid, i; | 
|  |  | 
|  | /* This isn't really an address, but ptrace thinks of it as one.  */ | 
|  | addr = inf_ptrace_register_u_offset (gdbarch, regnum, 1); | 
|  | if (addr == (CORE_ADDR)-1 | 
|  | || gdbarch_cannot_store_register (gdbarch, regnum)) | 
|  | return; | 
|  |  | 
|  | /* Cater for systems like GNU/Linux, that implement threads as | 
|  | separate processes.  */ | 
|  | pid = ptid_get_lwp (inferior_ptid); | 
|  | if (pid == 0) | 
|  | pid = ptid_get_pid (inferior_ptid); | 
|  |  | 
|  | size = register_size (gdbarch, regnum); | 
|  | gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0); | 
|  | buf = (PTRACE_TYPE_RET *) alloca (size); | 
|  |  | 
|  | /* Write the register contents into the inferior a chunk at a time.  */ | 
|  | regcache_raw_collect (regcache, regnum, buf); | 
|  | for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++) | 
|  | { | 
|  | errno = 0; | 
|  | ptrace (PT_WRITE_U, pid, (PTRACE_TYPE_ARG3)(uintptr_t)addr, buf[i]); | 
|  | if (errno != 0) | 
|  | error (_("Couldn't write register %s (#%d): %s."), | 
|  | gdbarch_register_name (gdbarch, regnum), | 
|  | regnum, safe_strerror (errno)); | 
|  |  | 
|  | addr += sizeof (PTRACE_TYPE_RET); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Store register REGNUM back into the inferior.  If REGNUM is -1, do | 
|  | this for all registers.  */ | 
|  |  | 
|  | static void | 
|  | inf_ptrace_store_registers (struct target_ops *ops, | 
|  | struct regcache *regcache, int regnum) | 
|  | { | 
|  | if (regnum == -1) | 
|  | for (regnum = 0; | 
|  | regnum < gdbarch_num_regs (get_regcache_arch (regcache)); | 
|  | regnum++) | 
|  | inf_ptrace_store_register (regcache, regnum); | 
|  | else | 
|  | inf_ptrace_store_register (regcache, regnum); | 
|  | } | 
|  |  | 
|  | /* Create a "traditional" ptrace target.  REGISTER_U_OFFSET should be | 
|  | a function returning the offset within the user area where a | 
|  | particular register is stored.  */ | 
|  |  | 
|  | struct target_ops * | 
|  | inf_ptrace_trad_target (CORE_ADDR (*register_u_offset) | 
|  | (struct gdbarch *, int, int)) | 
|  | { | 
|  | struct target_ops *t = inf_ptrace_target(); | 
|  |  | 
|  | gdb_assert (register_u_offset); | 
|  | inf_ptrace_register_u_offset = register_u_offset; | 
|  | t->to_fetch_registers = inf_ptrace_fetch_registers; | 
|  | t->to_store_registers = inf_ptrace_store_registers; | 
|  |  | 
|  | return t; | 
|  | } |