| 2017-09-06 John Baldwin <jhb@FreeBSD.org> | |
| * configure: Regenerate. | |
| 2017-02-13 Mike Frysinger <vapier@gentoo.org> | |
| * rx.c: Include libiberty.h. | |
| (N_RXO, N_RXT): Use ARRAY_SIZE. | |
| 2016-07-27 Alan Modra <amodra@gmail.com> | |
| * load.c: Don't include libbfd.h. | |
| (rx_load): Don't use private iovec seek or read. | |
| 2016-04-27 Nick Clifton <nickc@redhat.com> | |
| PR target/20000 | |
| * fpu.c (check_exceptions): Fix typo checking for signalling | |
| NANs. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * config.in, configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-09 Mike Frysinger <vapier@gentoo.org> | |
| * config.in, configure: Regenerate. | |
| 2016-01-06 Mike Frysinger <vapier@gentoo.org> | |
| * gdb-if.c (sim_open): Mark argv const. | |
| (sim_create_inferior): Mark argv and env const. | |
| 2016-01-04 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> | |
| * config.in, configure: Regenerate. | |
| 2015-12-26 Mike Frysinger <vapier@gentoo.org> | |
| * config.in, configure: Regenerate. | |
| 2015-11-10 Nick Clifton <nickc@redhat.com> | |
| * rx.c (id_names): Add nop4, nop5, nop6 and nop7. | |
| (decode_opcode): Likewise. | |
| (get_op): Handle RX_Operand_Zero_Indirect. | |
| Handle RX_Bad_Size and RX_MAX_SIZE. | |
| (put_op): Likewise. | |
| (N_MAP): Increase to 90. | |
| 2015-06-23 Mike Frysinger <vapier@gentoo.org> | |
| * configure.ac (AC_ARG_ENABLE(cycle-accurate)): Call AS_HELP_STRING. | |
| (AC_ARG_ENABLE(cycle-stats)): Likewise. | |
| * configure: Regenerate. | |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2015-04-24 Nick Clifton <nickc@redhat.com> | |
| PR sim/18273 | |
| * reg.c (put_reg): Fix check for valid register number. | |
| 2015-04-13 Mike Frysinger <vapier@gentoo.org> | |
| * configure: Regenerate. | |
| 2015-03-31 Mike Frysinger <vapier@gentoo.org> | |
| * config.in, configure: Regenerate. | |
| 2015-03-16 Mike Frysinger <vapier@gentoo.org> | |
| * aclocal.m4, config.in, configure: Regenerate. | |
| 2015-12-15 Joel Brobecker <brobecker@adacore.com> | |
| * gdb-if.c (open): Rename to... | |
| (rx_sim_is_open): This. Replace all uses of "open" by uses of | |
| "rx_sim_is_open" throughout. | |
| 2014-08-19 Alan Modra <amodra@gmail.com> | |
| * configure: Regenerate. | |
| 2014-08-15 Roland McGrath <mcgrathr@google.com> | |
| * configure: Regenerate. | |
| * config.in: Regenerate. | |
| 2014-03-10 Mike Frysinger <vapier@gentoo.org> | |
| * gdb-if.c (sim_do_command): Add const to cmd. Move args | |
| to top and add const. Call strdup on cmd and free at end. | |
| 2014-03-05 Mike Frysinger <vapier@gentoo.org> | |
| * gdb-if.c (sim_load): Add const to prog. | |
| 2014-02-17 Kevin Buettner <kevinb@redhat.com> | |
| * gdb-if.c (rx_signal_to_host): Rename to | |
| `rx_signal_to_gdb_signal'. Make static. Update all callers | |
| to use new name. Use signal names from include/gdb/signals.h. | |
| 2013-09-23 Alan Modra <amodra@gmail.com> | |
| * configure: Regenerate. | |
| 2013-06-25 Nick Clifton <nickc@redhat.com> | |
| * rx.c (SHIFT_OP): A shift by zero still sets the condition | |
| codes. | |
| 2013-06-03 Mike Frysinger <vapier@gentoo.org> | |
| * aclocal.m4, configure: Regenerate. | |
| 2013-01-16 Nick Clifton <nickc@redhat.com> | |
| * rx.c (decode_opcode): Handle RXO_satr. | |
| 2012-06-15 Joel Brobecker <brobecker@adacore.com> | |
| * config.in, configure: Regenerate. | |
| 2012-05-24 Pedro Alves <palves@redhat.com> | |
| PR gdb/7205 | |
| Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. | |
| 2012-03-24 Mike Frysinger <vapier@gentoo.org> | |
| * aclocal.m4, config.in, configure: Regenerate. | |
| 2012-03-22 Mike Frysinger <vapier@gentoo.org> | |
| * configure.ac (CYCLE_ACCURATE): Add template with AC_DEFINE call. | |
| (CYCLE_STATS): Likewise. | |
| 2012-03-02 Kevin Buettner <kevinb@redhat.com> | |
| * load.h (rx_load): Add `callback' parameter to function prototype. | |
| (gdb/callback.h): Include. | |
| * load.c (load.h): Include. | |
| (xprintf, find_section_name_by_offset): New functions. | |
| (rx_load): Add `callback' parameter. Add code for printing | |
| section loaded using GDB's printf facilities. | |
| * gdb-if.c (sim_load, sim_create_inferior): Update calls to | |
| rx_load(). | |
| * main.c (main): Likewise. | |
| * syscalls.c, syscalls.h (get_callbacks): New function. | |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> | |
| * aclocal.m4: New file. | |
| * configure: Regenerate. | |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> | |
| * configure.ac: Change include to common/acinclude.m4. | |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> | |
| * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER | |
| call. Replace common.m4 include with SIM_AC_COMMON. | |
| * configure: Regenerate. | |
| 2011-07-11 Mike Frysinger <vapier@gentoo.org> | |
| * configure.ac: Rename from configure.in. | |
| 2011-07-11 Mike Frysinger <vapier@gentoo.org> | |
| * configure.in: Add "dnl" before copyright notice. | |
| 2011-04-16 Mike Frysinger <vapier@gentoo.org> | |
| * gdb-if.c (sim_complete_command): New stub function. | |
| 2011-01-11 Andrew Burgess <aburgess@broadcom.com> | |
| * gdb-if.c (sim_store_register): Update return value to | |
| match new API. | |
| 2010-12-14 DJ Delorie <dj@redhat.com> | |
| * rx.c (decode_opcode): For "MVFC PC,", use the address of the | |
| opcode, not the address following the opcode. | |
| (decode_opcode): RXO_branchrel is relative to the opcode's PC, not | |
| the address following the opcode. | |
| 2010-11-11 DJ Delorie <dj@redhat.com> | |
| * rx.c (lsb_count): New. | |
| (divu_cycles): New. | |
| (div_cycles): New. | |
| (decode_opcode): Fix cycle count math for div, divu, suntil, and | |
| swhile. | |
| 2010-09-29 Kevin Buettner <kevinb@redhat.com> | |
| * mem.c (rx_mem_ptr): When invalidating the decode cache, account | |
| for the fact that the instruction decoder never uses swapped | |
| addresses. | |
| 2010-09-29 Nick Clifton <nickc@redhat.com> | |
| * rx.c (decode_opcode: RXO_int): Only break out of the emulation | |
| loop if rx_syscall() does not return a RX_STEPPED result. | |
| 2010-09-23 Kevin Buettner <kevinb@redhat.com> | |
| * rx.c (decode_opcode): Add cycle information for RXO_smovu. | |
| 2010-09-23 Kevin Buettner <kevinb@redhat.com> | |
| * fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include. | |
| * rx.c (decode_opcode): Declare `tx' as unsigned. | |
| * cpu.h (reset_decoder): Declare. | |
| * load.c (rx_load): Call `reset_decoder'. | |
| * rx.c (reset_decoder): New function. | |
| 2010-07-29 DJ Delorie <dj@redhat.com> | |
| * rx.c (decode_cache_base): New. | |
| (id_names): Remove ediv and edivu. | |
| (optype_names): Add TwoReg. | |
| (maybe_get_mem_page): New. | |
| (rx_get_byte): Call it. | |
| (get_op): Add TwoReg support. | |
| (put_op): Likewise. | |
| (PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode" | |
| is a pointer now. | |
| (DO_RETURN): New. We use longjmp to return an exception result. | |
| (decode_opcode): Make opcode a pointer to the decode cache. Save | |
| decoded opcode information and re-use. Call DO_RETURN instead of | |
| return throughout. Remove ediv and edivu. | |
| * mem.c (ptdc): New. Adds decode cache. | |
| (rx_mem_ptr): Support it. | |
| (rx_mem_decode_cache): New. | |
| * mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE. | |
| (rx_mem_decode_cache): Declare. | |
| * gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here... | |
| * main.c (main): ...and here. Use a fast loop if neither trace | |
| nor disassemble is given. | |
| * cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED, | |
| RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a | |
| valid code for anything. | |
| 2010-07-27 DJ Delorie <dj@redhat.com> | |
| * README.txt: New. | |
| * config.h (CYCLE_ACCURATE, CYCLE_STATS): New. | |
| * configure.in (--enable-cycle-accurate, --enable-cycle-stats): | |
| New. Default to enabled. | |
| * configure: Regenerate. | |
| * cpu.h (regs_type): Add cycle tracking info. | |
| (reset_pipeline_stats): Declare. | |
| (halt_pipeline_stats): Declare. | |
| (pipeline_stats): Declare. | |
| * main.c (done): Call pipeline_stats(). | |
| * mem.h (rx_mem_ptr): Moved to here ... | |
| * mem.c (mem_ptr): ... from here. Rename throughout. | |
| (mem_put_byte): Move LEDs to Port A. Add Port B to control cycle | |
| statistics. Move UART to SCI4. | |
| (mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles. | |
| * reg.c (init_regs): Set Rt reg to -1 (no reg). | |
| * rx.c: Add cycle counting and statistics throughout. | |
| (rx_get_byte): Optimize for speed. | |
| (decode_opcode): Likewise. | |
| (reset_pipeline_stats): New. | |
| (halt_pipeline_stats): New. | |
| (pipeline_stats): New. | |
| * trace.c (sim_disasm_one): Print cycle count. | |
| 2010-07-07 Kevin Buettner <kevinb@redhat.com> | |
| * gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum. | |
| 2010-06-24 Kevin Buettner <kevinb@redhat.com> | |
| * gdb-if.c (trace.h): Include. | |
| (reg_size, sim_fetch_register): Add cases for sim_rx_acc_regnum. | |
| 2010-06-07 Nick Clifton <nickc@redhat.com> | |
| * reg.c (set_oszc): Use unsigned int for the mask. | |
| (set_szc, set_osz, set_sz): Likewise. | |
| 2010-05-28 Kevin Buettner <kevinb@redhat.com> | |
| * gdb-if.c (sim_do_command): Add a "sim verbose noisy" command. | |
| 2010-04-14 Mike Frysinger <vapier@gentoo.org> | |
| * gdb-if.c (sim_write): Add const to buf arg. | |
| 2010-01-30 Masaki Muranaka <monaka@monami-software.com> | |
| * configure.in: Check if the host has getopt.h. | |
| * configure: Regenerate. | |
| * config.in: Regenerate. | |
| * main.c: Include config.h. | |
| Use HAVE_STDLIB_H, HAVE_UNISTD_H, HAVE_GETOPT_H. | |
| Include getopt.h in case HAVE_GETOPT_H is defined. | |
| 2009-12-22 Yoshinori Sato <ysato@users.sourceforge.jp> | |
| * rx/rx.c (decode_opcode): btst bit address mask fix. | |
| 2009-11-30 DJ Delorie <dj@redhat.com> | |
| * rx/rx.c (decode_opcode): fix SWHILE logic. | |
| 2009-10-27 DJ Delorie <dj@redhat.com> | |
| Kevin Buettner <kevinb@redhat.com> | |
| * load.h: New. | |
| * rx.c: New. | |
| * syscalls.c: New. | |
| * syscalls.h: New. | |
| * load.c: New. | |
| * configure.in: New. | |
| * gdb-if.c: New. | |
| * err.c: New. | |
| * cpu.h: New. | |
| * Makefile.in: New. | |
| * fpu.c: New. | |
| * mem.c: New. | |
| * config.in: New. | |
| * err.h: New. | |
| * reg.c: New. | |
| * mem.h: New. | |
| * main.c: New. | |
| * misc.h: New. | |
| * trace.c: New. | |
| * misc.c: New. | |
| * syscall.h: New. | |
| * trace.h: New. | |
| * fpu.h: New. |