| 2006-08-18 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| bfd/ |
| * elf32-arm.c (elf32_arm_link_hash_entry): Add export_glue. |
| (elf32_arm_link_hash_newfunc): Initialize export_glue. |
| (record_arm_to_thumb_glue): Return stub symbol. |
| (elf32_arm_create_thumb_stub): New function. |
| (elf32_arm_to_thumb_stub): Use it. |
| (elf32_arm_to_thumb_export_stub): New function. |
| (elf32_arm_begin_write_processing): New function. |
| (allocate_dynrelocs): Allocate Arm stubs. |
| (elf_backend_begin_write_processing): Define. |
| (elf32_arm_symbian_begin_write_processing): Remove ATTRIBUTE_UNUSED. |
| Call elf32_arm_begin_write_processing. |
| |
| ld/ |
| * emultempl/armelf.em (arm_elf_before_allocation): Call |
| gld${EMULATION_NAME}_before_allocation after setting interworking bfd. |
| |
| ld/testsuite/ |
| * ld-arm/arm-elf.exp (armelftests): Add armthumb-lib.so. Add |
| -use-blx to mixed-lib.so |
| * ld-arm/armthumb-lib.d: New file. |
| * ld-arm/armthumb-lib.sym: New file. |
| |
| 2006-08-18 Julian Brown <julian@codesourcery.com> |
| |
| libiberty/ |
| * floatformat.c (get_field): Fix segfault with little-endian word |
| order on 64-bit hosts. |
| (put_field): Likewise. |
| (min): Move definition. |
| |
| 2006-08-18 Julian Brown <julian@codesourcery.com> |
| |
| opcodes/ |
| * arm-dis.c (print_insn_neon): Disassemble 32-bit immediates as |
| signed on 64-bit hosts. |
| |
| 2006-08-16 Julian Brown <julian@codesourcery.com> |
| |
| gas/ |
| * config/tc-arm.c (md_assemble): Improve diagnostic when attempting |
| to use ARM instructions on non-ARM-supporting cores. |
| (autoselect_thumb_from_cpu_variant): New function. Switch on Thumb |
| mode automatically based on cpu variant. |
| (md_begin): Call above function. |
| |
| gas/testsuite/ |
| * gas/arm/noarm.s: Add test for disabled ARM insns. |
| * gas/arm/noarm.d: Drive test for above. |
| * gas/arm/noarm.l: Expected error output. |
| |
| 2006-08-16 Julian Brown <julian@codesourcery.com> |
| |
| gas/ |
| * config/tc-arm.c (opcode_lookup): Allow Neon type suffixes to be |
| recognized in non-unified syntax mode. |
| |
| 2006-08-15 Mark Shinwell <shinwell@codesourcery.com> |
| |
| gas/ |
| * config/tc-arm.c (s_arm_unwind_save_vfp_armv6): New. Parse |
| a directive saving VFP registers for ARMv6 or later. |
| (s_arm_unwind_save): Add parameter arch_v6 and call |
| s_arm_unwind_save_vfp or s_arm_unwind_save_vfp_armv6 as |
| appropriate. |
| (md_pseudo_table): Add entry for new "vsave" directive. |
| * doc/c-arm.texi: Correct error in example for "save" |
| directive (fstmdf -> fstmdx). Also document "vsave" directive. |
| |
| 2006-08-03 Joseph Myers <joseph@codesourcery.com> |
| |
| Backport from mainline. |
| |
| gas/ |
| * config/tc-arm.c (parse_operands): Handle invalid register name |
| for OP_RIWR_RIWC. |
| |
| gas/testsuite/ |
| * gas/arm/iwmmxt-bad.s: Test invalid register names for wldrw and |
| wstrw. |
| * gas/arm/iwmmxt-bad.l: Update. |
| |
| gas/ |
| * config/tc-arm.c (enum operand_parse_code): Add OP_RIWC_RIWG. |
| (parse_operands): Handle it. |
| (insns): Use it for tmcr and tmrc. |
| |
| gas/testsuite/ |
| * gas/arm/iwmmxt.s: Test tmcr and tmrc with wcgr registers. |
| * gas/arm/iwmmxt.d: Update. |
| |
| 2006-07-27 Carlos O'Donell <carlos@codesourcery.com> |
| |
| bfd/ |
| * elfxx-mips.c (_bfd_mips_elf_print_private_bfd_data): |
| Print EF_MIPS_NOREORDER, EF_MIPS_PIC, EF_MIPS_CPIC, EF_MIPS_XGOT |
| and EF_MIPS_UCODE. |
| |
| 2006-07-26 Vladimir Prus <vladimir@codesourcery.com> |
| |
| bfd/ |
| * Makefile.am: (VERSUFFIX_s): New. Pass it to compiler |
| via -D. |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| * configure.in: Add --with-versuffix option. |
| * version.h: Add BFD_VERSION_SUFFIX, use it |
| in BFD_VERSION_STRING. |
| |
| binutils/ |
| * Makefile.am: (REPORT_BUGS_TO_s): New. Pass it to compiler |
| via -D. |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| * configure.in: Add --with-bugurl option. |
| |
| gas/ |
| * Makefile.am: (REPORT_BUGS_TO_s): New. Pass it to compiler |
| via -D. |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| * configure.in: Add --with-bugurl option. |
| |
| gprof/ |
| * Makefile.am: (VERSUFFIX_s, REPORT_BUGS_TO_s): New. Pass |
| them to compiler via -D. |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| * configure.in: Add --with-versuffix and --with-bugurl option. |
| * gprof.c: Print version suffix. |
| |
| ld/ |
| * Makefile.am: (REPORT_BUGS_TO_s): New. Pass it to compiler |
| via -D. |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| * configure.in: Add --with-bugurl option. |
| |
| 2006-07-26 Richard Sandiford <richard@codesourcery.com> |
| |
| opcodes/ |
| * m68k-opc.c (m68k_opcodes): Fix operand specifier in the Coldfire |
| "fdaddl" entry. |
| |
| gas/testsuite/ |
| * gas/m68k/mcf-fpu.s: Add tests for all addressing modes. |
| * gas/m68k/mcf-fpu.d: Update accordingly. |
| |
| 2006-07-20 Julian Brown <julian@codesourcery.com> |
| |
| Backport from mainline. |
| |
| opcodes/ |
| * arm-dis.c (coprocessor): Alter fmsrr disassembly syntax. |
| |
| gas/testsuite/ |
| * gas/arm/vfp-neon-syntax.d: Tweak expected fmsrr syntax. |
| * gas/arm/vfp-neon-syntax_t2.d: Likewise. |
| * gas/arm/vfp2.d: Likewise. |
| * gas/arm/vfp2_t2.d: Likewise. |
| |
| 2006-07-19 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| gas/ |
| * config/tc-arm.c (insns): Fix rbit Arm opcode. |
| gas/testsuite/ |
| * gas/arm/archv6t2.d: Adjust expected output for rbit. |
| opcodes/ |
| * armd-dis.c (arm_opcodes): Fix rbit opcode. |
| |
| 2006-07-18 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| bfd/ |
| * bfd-in2.h: Regenerate. |
| * libbfd.h: Regenerate. |
| * reloc.c: Add BFD_RELOC_ARM_T32_ADD_IMM. |
| |
| gas/ |
| * tc-arm.c (do_t_add_sub): Use addw/subw when source is PC. |
| (md_convert_frag): Use correct reloc for add_pc. Use |
| BFD_RELOC_ARM_T32_ADD_IMM for normal add/sum. |
| (md_apply_fix): Handle BFD_RELOC_ARM_T32_ADD_IMM. |
| (arm_force_relocation): Handle BFD_RELOC_ARM_T32_ADD_IMM. |
| |
| gas/testsuite/ |
| * gas/arm/thumb2_add.d: New test. |
| * gas/arm/thumb2_add.s: New test. |
| |
| 2006-07-14 Nathan Sidwell <nathan@codesourcery.com> |
| |
| bfd/ |
| * config.bfd (sh-*-uclinux, sh[12]-*-uclinux): New stanza. |
| |
| gas/ |
| * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf. |
| |
| ld/ |
| * Makefile.am (ALL_EMULATIONS): Add eshelf_uclinux.o |
| (eshelf_uclinux.c): New target. |
| * Makefile.in: Rebuilt. |
| * configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): New stanza. |
| * emulparams/shelf_uclinux.sh: New. |
| |
| 2006-07-12 Richard Sandiford <richard@codesourcery.com> |
| |
| Backport from mainline: |
| |
| bfd/ |
| 2006-07-12 Matthew R. Dempsky <mrd@alkemio.org> |
| |
| * cpu-m68k.c (bfd_m68k_compatible): Handle CPU32. |
| |
| ld/testsuite/ |
| 2006-07-12 Richard Sandiford <richard@codesourcery.com> |
| |
| * ld-m68k/merge-ok-1c.d: New test. |
| * ld-m68k/m68k.exp: Run it. |
| |
| 2006-06-22 Richard Sandiford <richard@codesourcery.com> |
| |
| binutils/ |
| * objcopy.c (localize_hidden): New variable. |
| (OPTION_LOCALIZE_HIDDEN): New command_line_switch value. |
| (copy_options): Add --localize-hidden. |
| (copy_usage): Mention --localize-hidden. |
| (is_hidden_symbol): New function. |
| (filter_symbols): Handle localize_hidden. |
| (copy_object): Call filter_symbols if localize_hidden. |
| (copy_main): Handle OPTION_LOCALIZE_HIDDEN. |
| * doc/binutils.texi (--localize-hidden): Document new option. |
| |
| binutils/testsuite/ |
| * binutils-all/localize-hidden-1.s, |
| * binutils-all/localize-hidden-1.d, |
| * binutils-all/localize-hidden-2.s, |
| * binutils-all/localize-hidden-2.d: New tests. |
| * binutils-all/objcopy.exp: Run them. |
| |
| 2006-06-22 Richard Sandiford <richard@codesourcery.com> |
| |
| Backport from mainline: |
| |
| binutils/testsuite/ |
| 2006-04-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * lib/utils-lib.exp (run_dump_test): New. |
| (slurp_options): Likewise. |
| (regexp_diff): Likewise. |
| (file_contents): Likewise. |
| (verbose_eval): Likewise. |
| |
| 2006-06-21 Mark Shinwell <shinwell@codesourcery.com> |
| |
| ld/ |
| * ldlang.c (lang_insert_orphan): Correctly handle the case where |
| the section is to end up after the section currently at the end |
| of the list in output_bfd. |
| |
| 2006-06-19 Vladimir Prus <vladimir@codesourcery.com> |
| |
| bfd/ |
| * elf32-arm.c (elf32_arm_swap_symbol_out): Don't set low |
| bit for undefined symbols. |
| |
| ld/testsuite |
| * ld-arm/arm-elf.exp: New test. |
| * ld-arm/use-thumb-lib.s: New file. |
| * ld-arm/use-thumb-lib.sym: New file. |
| |
| 2006-06-15 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * include/elf/arm.h: Correct names of R_ARM_LDC_G{0,1,2} |
| to R_ARM_LDC_SB_G{0,1,2} respectively. |
| |
| bfd/ |
| * bfd-in2.h: Regenerate. |
| * elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0, |
| R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2, |
| R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0, |
| R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0, |
| R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC, |
| R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1, |
| R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1, |
| R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1, |
| R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1, |
| R_ARM_LDC_SB_G2): New relocation types. |
| (R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and |
| adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1 |
| and friends. |
| (elf32_arm_howto_table_3): Delete; contents merged into |
| elf32_arm_howto_table_2. |
| (elf32_arm_howto_from_type): Adjust correspondingly. |
| (elf32_arm_reloc_map): Extend with the above relocations. |
| (calculate_group_reloc_mask): New function. |
| (identify_add_or_sub): New function. |
| (elf32_arm_final_link_relocate): Support for the above |
| relocations. |
| * reloc.c: Add enumeration entries for BFD_RELOC_ARM_... |
| codes to correspond to the above relocations. |
| |
| gas/ |
| * config/tc-arm.c (enum parse_operand_result): New. |
| (struct group_reloc_table_entry): New. |
| (enum group_reloc_type): New. |
| (group_reloc_table): New array. |
| (find_group_reloc_table_entry): New function. |
| (parse_shifter_operand_group_reloc): New function. |
| (parse_address_main): New function, incorporating code |
| from the old parse_address function. To be used via... |
| (parse_address): wrapper for parse_address_main; and |
| (parse_address_group_reloc): new function, likewise. |
| (enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR, |
| OP_ADDRGLDRS, OP_ADDRGLDC. |
| (parse_operands): Support for these new operand codes. |
| New macro po_misc_or_fail_no_backtrack. |
| (encode_arm_cp_address): Preserve group relocations. |
| (insns): Modify to use the above operand codes where group |
| relocations are permitted. |
| (md_apply_fix): Handle the group relocations |
| ALU_PC_G0_NC through LDC_SB_G2. |
| (tc_gen_reloc): Likewise. |
| (arm_force_relocation): Leave group relocations for the linker. |
| (arm_fix_adjustable): Likewise. |
| |
| gas/testsuite/ |
| * gas/arm/group-reloc-alu.d: New test. |
| * gas/arm/group-reloc-alu-encoding-bad.d: New test. |
| * gas/arm/group-reloc-alu-encoding-bad.l: New test. |
| * gas/arm/group-reloc-alu-encoding-bad.s: New test. |
| * gas/arm/group-reloc-alu-parsing-bad.d: New test. |
| * gas/arm/group-reloc-alu-parsing-bad.l: New test. |
| * gas/arm/group-reloc-alu-parsing-bad.s: New test. |
| * gas/arm/group-reloc-alu.s: New test. |
| * gas/arm/group-reloc-ldc.d: New test. |
| * gas/arm/group-reloc-ldc-encoding-bad.d: New test. |
| * gas/arm/group-reloc-ldc-encoding-bad.l: New test. |
| * gas/arm/group-reloc-ldc-encoding-bad.s: New test. |
| * gas/arm/group-reloc-ldc-parsing-bad.d: New test. |
| * gas/arm/group-reloc-ldc-parsing-bad.l: New test. |
| * gas/arm/group-reloc-ldc-parsing-bad.s: New test. |
| * gas/arm/group-reloc-ldc.s: New test. |
| * gas/arm/group-reloc-ldr.d: New test. |
| * gas/arm/group-reloc-ldr-encoding-bad.d: New test. |
| * gas/arm/group-reloc-ldr-encoding-bad.l: New test. |
| * gas/arm/group-reloc-ldr-encoding-bad.s: New test. |
| * gas/arm/group-reloc-ldr-parsing-bad.d: New test. |
| * gas/arm/group-reloc-ldr-parsing-bad.l: New test. |
| * gas/arm/group-reloc-ldr-parsing-bad.s: New test. |
| * gas/arm/group-reloc-ldr.s: New test. |
| * gas/arm/group-reloc-ldrs.d: New test. |
| * gas/arm/group-reloc-ldrs-encoding-bad.d: New test. |
| * gas/arm/group-reloc-ldrs-encoding-bad.l: New test. |
| * gas/arm/group-reloc-ldrs-encoding-bad.s: New test. |
| * gas/arm/group-reloc-ldrs-parsing-bad.d: New test. |
| * gas/arm/group-reloc-ldrs-parsing-bad.l: New test. |
| * gas/arm/group-reloc-ldrs-parsing-bad.s: New test. |
| * gas/arm/group-reloc-ldrs.s: New test. |
| |
| ld/testsuite/ |
| * ld-arm/group-relocs-alu-bad.d: New test. |
| * ld-arm/group-relocs-alu-bad.s: New test. |
| * ld-arm/group-relocs.d: New test. |
| * ld-arm/group-relocs-ldc-bad.d: New test. |
| * ld-arm/group-relocs-ldc-bad.s: New test. |
| * ld-arm/group-relocs-ldr-bad.d: New test. |
| * ld-arm/group-relocs-ldr-bad.s: New test. |
| * ld-arm/group-relocs-ldrs-bad.d: New test. |
| * ld-arm/group-relocs-ldrs-bad.s: New test. |
| * ld-arm/group-relocs.s: New test. |
| * ld-arm/arm-elf.exp: Wire in new tests. |
| |
| 2006-06-15 Julian Brown <julian@codesourcery.com> |
| |
| gas/ |
| * config/tc-arm.c (do_vfp_nsyn_ldr_str): Remove, fold into... |
| (do_neon_ldr_str): Always defer to VFP encoding routines, which handle |
| relocs properly. |
| |
| 2006-05-25 Alan Modra <amodra@bigpond.net.au> |
| |
| * bfd/elf.c (sym_is_global): Return a bfd_boolean. |
| (ignore_section_sym): New function. |
| (elf_map_symbols): Use ignore_section_sym to discard some syms. |
| (_bfd_elf_symbol_from_bfd_symbol): Ensure section belongs to |
| bfd before using elf_section_syms. |
| |
| 2006-05-25 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gas/config/tc-m68k.c (mcf52235_ctrl, mcf5225_ctrl): New. |
| (m68k_cpus): Add 52230, 52233, 52234, 52235, 5224, 5225. |
| |
| 2006-05-24 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * bfd/elf-bfd.h (elf_backend_data): Add |
| elf_backend_output_arch_local_syms |
| * bfd/elf32-arm.c (output_arch_syminfo): Define. |
| (elf32_arm_ouput_plt_map_sym, elf32_arm_output_plt_map, |
| elf32_arm_output_arch_local_syms): New functions. |
| (elf_backend_output_arch_local_syms): Define. |
| * bfd/elflink.c (bfd_elf_final_link): Call |
| elf_backend_output_arch_local_syms. |
| * bfd/elfxx-target.h (elf_backend_output_arch_local_syms): Provide |
| default definition. |
| (elfNN_bed): Add elf_backend_output_arch_local_syms. |
| * ld/testsuite/ld-arm/arm-app-abs32.d: Update expected output. |
| * ld/testsuite/ld-arm/arm-app.d: Ditto. |
| * ld/testsuite/ld-arm/arm-lib-plt32.d: Ditto. |
| * ld/testsuite/ld-arm/arm-lib.d: Ditto. |
| * ld/testsuite/ld-arm/mixed-app-v5.d: Ditto. |
| * ld/testsuite/ld-arm/mixed-app.d: Ditto. |
| * ld/testsuite/ld-arm/mixed-lib.d: Ditto. |
| |
| 2006-05-24 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * bfd/elf32-arm.c (put_arm_insn, put_thumb_insn): New functions. |
| (elf32_thumb_to_arm_stub, elf32_arm_to_thumb_stub, |
| elf32_arm_finish_dynamic_symbol): Use them. |
| |
| 2006-05-22 Richard Sandiford <richard@codesourcery.com> |
| |
| opcodes/ |
| * m68k-dis.c (m68k_scan_mask): Add missing return. |
| |
| 2006-05-20 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * binutils/testsuite/binutils-all/objcopy.exp: Skip for uclinux |
| targets. |
| |
| 2006-05-15 Paul Brook <paul@codesourcery.com> |
| |
| Backport from mainline. |
| * bfd/cpu-arm.c (bfd_is_arm_mapping_symbol_name): Rename ... |
| (bfd_is_arm_special_symbol_name): ... to this. Add type argument. |
| Check symbol name is of specified type. |
| * bfd/elf32-arm.c (elf32_arm_is_target_special_symbol, |
| arm_elf_find_function, elf32_arm_output_symbol_hook): Use |
| bfd_is_arm_special_symbol_name. |
| * bfd/bfd-in.h (BFD_ARM_SPECIAL_SYM_TYPE_MAP, |
| BFD_ARM_SPECIAL_SYM_TYPE_TAG, BFD_ARM_SPECIAL_SYM_TYPE_OTHER, |
| BFD_ARM_SPECIAL_SYM_TYPE_ANY): Define. |
| (bfd_is_arm_mapping_symbol_name): Remove prototype. |
| (bfd_is_arm_special_symbol_name): Add prototype. |
| * bfd/bfd-in2.h: Regenerate. |
| * gas/config/tc-arm.c (arm_adjust_symtab): Use |
| bfd_is_arm_special_symbol_name. |
| * ld/testsuite/ld-arm/arm-be8.d: New test. |
| * ld/testsuite/ld-arm/arm-be8.s: New test. |
| * ld/testsuite/ld-arm/arm-elf.exp: Add arm-be8. |
| |
| 2006-05-12 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * binutils/doc/binutils.texi: Rename "Index" to "Binutils Index" |
| |
| 2006-05-11 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * bfd/doc/bfd.texinfo: Rename "Index" to "BFD Index" |
| * ld/ld.texinfo: Rename "Index" to "LD Index" |
| * gas/doc/as.texinfo: Rename "Index" to "AS Index" |
| Rename "ABORT" to "ABORT (COFF)" |
| |
| 2006-05-06 Joseph S. Myers <joseph@codesourcery.com> |
| |
| Backport: |
| 2006-03-30 Jakub Jelinek <jakub@redhat.com> |
| * ldmisc.c (vfinfo): Revert 2005-10-05 changes. If |
| bfd_find_nearest_line succeeded for %C or %D, but filename |
| is NULL, print section+offset at the end. |
| |
| 2006-05-05 Julian Brown <julian@codesourcery.com> |
| |
| * gas/config/tc-arm.c (stdarg.h): include. |
| (arm_it): Add uncond_value field. Add isvec and issingle to operand |
| array. |
| (arm_reg_type): Add REG_TYPE_VFSD (single or double VFP reg) and |
| REG_TYPE_NSDQ (single, double or quad vector reg). |
| (reg_expected_msgs): Update. |
| (BAD_FPU): Add macro for unsupported FPU instruction error. |
| (parse_neon_type): Support 'd' as an alias for .f64. |
| (parse_typed_reg_or_scalar): Support REG_TYPE_VFSD, REG_TYPE_NSDQ |
| sets of registers. |
| (parse_vfp_reg_list): Don't update first arg on error. |
| (parse_neon_mov): Support extra syntax for VFP moves. |
| (operand_parse_code): Add OP_RVSD, OP_RNSDQ, OP_VRSDLST, OP_RVSD_IO, |
| OP_RNSDQ_RNSC, OP_RVC_PSR, OP_APSR_RR, OP_oRNSDQ. |
| (parse_operands): Support isvec, issingle operands fields, new parse |
| codes above. |
| (do_vfp_nsyn_mrs, do_vfp_nsyn_msr): New functions. Support VFP mrs, |
| msr variants. |
| (do_mrs, do_msr, do_t_mrs, do_t_msr): Add support for above. |
| (NEON_ENC_TAB): Add vnmul, vnmla, vnmls, vcmp, vcmpz, vcmpe, vcmpez. |
| (NEON_ENC_SINGLE, NEON_ENC_DOUBLE): Define macros. |
| (NEON_SHAPE_DEF): New macro. Define table of possible instruction |
| shapes. |
| (neon_shape): Redefine in terms of above. |
| (neon_shape_class): New enumeration, table of shape classes. |
| (neon_shape_el): New enumeration. One element of a shape. |
| (neon_shape_el_size): Register widths of above, where appropriate. |
| (neon_shape_info): New struct. Info for shape table. |
| (neon_shape_tab): New array. |
| (neon_type_mask): Add N_F64, N_VFP. Update N_MAX_NONSPECIAL. |
| (neon_check_shape): Rewrite as... |
| (neon_select_shape): New function to classify instruction shapes, |
| driven by new table neon_shape_tab array. |
| (neon_quad): New function. Return 1 if shape should set Q flag in |
| instructions (or equivalent), 0 otherwise. |
| (type_chk_of_el_type): Support F64. |
| (el_type_of_type_chk): Likewise. |
| (neon_check_type): Add support for VFP type checking (VFP data |
| elements fill their containing registers). |
| (do_vfp_cond_or_thumb): Fill in condition field in ARM mode, or 0xE |
| in thumb mode for VFP instructions. |
| (do_vfp_nsyn_opcode): New function. Look up the opcode in argument, |
| and encode the current instruction as if it were that opcode. |
| (try_vfp_nsyn): New. If this looks like a VFP instruction with ARGS |
| arguments, call function in PFN. |
| (do_vfp_nsyn_add_sub, do_vfp_nsyn_mla_mls, do_vfp_nsyn_mul) |
| (do_vfp_nsyn_abs_neg, do_vfp_nsyn_ldm_stm, do_vfp_nsyn_ldr_str) |
| (do_vfp_nsyn_sqrt, do_vfp_nsyn_div, do_vfp_nsyn_nmul) |
| (do_vfp_nsyn_cmp, nsyn_insert_sp, do_vfp_nsyn_push) |
| (do_vfp_nsyn_pop, do_vfp_nsyn_cvt, do_vfp_nsyn_cvtz): New functions. |
| Redirect Neon-syntax VFP instructions to VFP instruction handlers. |
| (do_neon_dyadic_i_su, do_neon_dyadic_i64_su, do_neon_shl_imm) |
| (do_neon_qshl_imm, do_neon_logic, do_neon_bitfield) |
| (neon_dyadic_misc, neon_compare, do_neon_tst, do_neon_qdmulh) |
| (do_neon_fcmp_absolute, do_neon_step, do_neon_sli, do_neon_sri) |
| (do_neon_qshlu_imm, neon_move_immediate, do_neon_mvn, do_neon_ext) |
| (do_neon_rev, do_neon_dup, do_neon_rshift_round_imm, do_neon_trn) |
| (do_neon_zip_uzp, do_neon_sat_abs_neg, do_neon_pair_long) |
| (do_neon_recip_est, do_neon_cls, do_neon_clz, do_neon_cnt) |
| (do_neon_swp): Use neon_select_shape not neon_check_shape. Use |
| neon_quad. |
| (vfp_or_neon_is_neon): New function. Call if a mnemonic shared |
| between VFP and Neon turns out to belong to Neon. Perform |
| architecture check and fill in condition field if appropriate. |
| (do_neon_addsub_if_i, do_neon_mac_maybe_scalar, do_neon_abs_neg) |
| (do_neon_cvt): Add support for VFP variants of instructions. |
| (neon_cvt_flavour): Extend to cover VFP conversions. |
| (do_neon_mov): Rewrite to use neon_select_shape. Add support for VFP |
| vmov variants. |
| (do_neon_ldr_str): Handle single-precision VFP load/store. |
| (do_neon_ld_st_interleave, do_neon_ld_st_lane, do_neon_ld_dup): Use |
| NS_NULL not NS_IGNORE. |
| (opcode_tag): Add OT_csuffixF for operands which either take a |
| conditional suffix, or have 0xF in the condition field. |
| (md_assemble): Add support for OT_csuffixF. |
| (NCE): Replace macro with... |
| (NCE_tag, NCE, NCEF): New macros. |
| (nCE): Replace macro with... |
| (nCE_tag, nCE, nCEF): New macros. |
| (insns): Add support for VFP insns or VFP versions of insns msr, mrs, |
| vsqrt, vdiv, vnmul, vnmla, vnmls, vcmp, vcmpe, vpush, vpop, vcvtz, |
| vmul, vmla, vmls, vadd, vsub, vabs, vneg, vldm, vldmia, vldbdb, vstm, |
| vstmia, vstmdb, vldr, vstr, vcvt, vmov. Group shared VFP/Neon insns |
| together. |
| |
| * gas/testsuite/gas/arm/itblock.s: New file. Helper macro for making |
| all-true IT blocks. |
| * gas/testsuite/gas/arm/neon-cond-bad-inc.s: New test. Make sure |
| unconditional Neon instructions are rejected... |
| * gas/testsuite/gas/arm/neon-cond-bad.s: In ARM mode, and... |
| * gas/testsuite/gas/arm/neon-cond-bad_t2.s: Accepted in Thumb mode |
| (with IT). |
| * gas/testsuite/gas/arm/neon-cond-bad.l: Expected error output in ARM |
| mode. |
| * gas/testsuite/gas/arm/neon-cond-bad.d: Control ARM mode test. |
| * gas/testsuite/gas/arm/neon-cond-bad_t2.d: Expected output in Thumb |
| mode. |
| * gas/testsuite/gas/arm/vfp-neon-syntax-inc.s: Test VFP Neon-style |
| syntax. |
| * gas/testsuite/gas/arm/vfp-neon-syntax.s: ...in ARM mode. |
| * gas/testsuite/gas/arm/vfp-neon-syntax_t2.s: ...and Thumb mode. |
| * gas/testsuite/gas/arm/vfp-neon-syntax.d: Expected output in ARM mode. |
| * gas/testsuite/gas/arm/vfp-neon-syntax_t2.d: Expected output in Thumb |
| mode. |
| |
| 2006-05-05 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * configure: Regenerate. |
| * configure.in: Enable gprof for cross builds. |
| |
| 2006-05-03 Julian Brown <julian@codesourcery.com> |
| |
| * gas/doc/c-arm.texi: Add documentation for .dn/.qn directives. |
| |
| 2006-05-03 Paul Brook <paul@codesourcery.com> |
| |
| * bfd/elf32-arm.c (elf32_arm_reloc_map): Add MOVW and MOVT relocs. |
| (elf32_arm_final_link_relocate): Handle MOVW and MOVT relocs. |
| (elf32_arm_gc_sweep_hook, elf32_arm_check_relocs): Ditto. |
| * bfd/reloc.c: Ditto. |
| * bfd/bfd-in2.h: Regenerate. |
| * bfd/libbfd.h: Regenerate. |
| * bfd/libcoff.h: Regenerate. |
| * gas/config/tc-arm.c (parse_half): New function. |
| (operand_parse_code): Remove OP_Iffff. Add OP_HALF. |
| (parse_operands): Ditto. |
| (do_mov16): Reject invalid relocations. |
| (do_t_mov16): Ditto. Use Thumb reloc numbers. |
| (insns): Replace Iffff with HALF. |
| (md_apply_fix): Add MOVW and MOVT relocs. |
| (tc_gen_reloc): Ditto. |
| * gas/doc/c-arm.texi: Document relocation operators |
| * ld/testsuite/ld-arm/arm-elf.exp: Add arm-movwt. |
| * ld/testsuite/ld-arm/arm-movwt.d: New test. |
| * ld/testsuite/ld-arm/arm-movwt.s: New test. |
| * ld/testsuite/ld-arm/arm.ld: Add .far. |
| |
| 2006-05-02 Joseph Myers <joseph@codesourcery.com> |
| |
| * gas/config/tc-arm.c (do_iwmmxt_wldstbh): Don't multiply offset |
| by 4 here. |
| (md_apply_fix3): Multiply offset by 4 here for |
| BFD_RELOC_ARM_CP_OFF_IMM_S2 and BFD_RELOC_ARM_T32_CP_OFF_IMM_S2. |
| * gas/testsuite/gas/arm/iwmmxt.s: Increase offsets for wstrb and |
| wstrh. |
| * gas/testsuite/gas/arm/iwmmxt.d: Update expected results. |
| * gas/testsuite/gas/arm/iwmmxt-bad2.s: Test wstrb, wstrh, wldrb |
| and wldrh. |
| * gas/testsuite/gas/arm/iwmmxt-bad2.l: Update expected error |
| messages. |
| |
| 2006-05-01 Paul Brook <paul@codesourcery.com> |
| |
| * bfd/elf32-arm.c (elf32_arm_final_link_relocate): Set thumb funciton |
| bit for R_ARM_REL32. |
| * gas/config/tc-arm.c (arm_optimize_expr): New function. |
| * gas/config/tc-arm.h (md_optimize_expr): Define |
| (arm_optimize_expr): Add prototype. |
| (TC_FORCE_RELOCATION_SUB_SAME): Define. |
| * ld/testsuite/ld-arm/arm-elf.exp: Add thumb-rel32. |
| * ld/testsuite/ld-arm/thumb-rel32.d: New test. |
| * ld/testsuite/ld-arm/thumb-rel32.s: New test. |
| |
| 2006-04-29 Paul Brook <paul@codesourcery.com> |
| |
| * opcodes/arm-dis.c (coprocessor_opcodes): Add %c to unconditional |
| arm instructions. |
| (neon_opcodes): Add conditional execution specifiers. |
| (thumb_opcodes): Ditto. |
| (thumb32_opcodes): Ditto. |
| (arm_conditional): Change 0xe to "al" and add "" to end. |
| (ifthen_state, ifthen_next_state, ifthen_address): New. |
| (IFTHEN_COND): Define. |
| (print_insn_coprocessor, print_insn_neon): Print thumb conditions. |
| (print_insn_arm): Change %c to use new values of arm_conditional. |
| (print_insn_thumb16): Print thumb conditions. Add %I. |
| (print_insn_thumb32): Print thumb conditions. |
| (find_ifthen_state): New function. |
| (print_insn): Track IT block state. |
| * gas/testsuite/gas/arm/thumb2_bcond.d: Update expected output. |
| * gas/testsuite/gas/arm/thumb32.d: Ditto. |
| * gas/testsuite/gas/arm/vfp1_t2.d: Ditto. |
| * gas/testsuite/gas/arm/vfp1xD_t2.d: Ditto. |
| * binutils/testsuite/binutils-all/arm/objdump.exp: New file. |
| * binutils/testsuite/binutils-all/arm/thumb2-cond.s: New test. |
| |
| 2006-04-28 Mark Mitchell <mark@codesourcery.com> |
| |
| * doc/as.texinfo: Mention that some .type syntaxes are not |
| supported on all architectures. |
| |
| 2006-04-27 Richard Sandiford <richard@codesourcery.com> |
| |
| include/opcodes/ |
| * m68k.h (mcf_mask): Define. |
| |
| opcodes/ |
| * m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd |
| and fmovem entries. Put register list entries before immediate |
| mask entries. Use "l" rather than "L" in the fmovem entries. |
| * m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it |
| out from INFO. |
| (m68k_scan_mask): New function, split out from... |
| (print_insn_m68k): ...here. If no architecture has been set, |
| first try printing an m680x0 instruction, then try a Coldfire one. |
| |
| 2006-04-27 Richard Sandiford <richard@codesourcery.com> |
| |
| bfd/ |
| * elf32-m68k.c (elf_m68k_pcrel_insn): New structure. |
| (elf_m68k_plt_info): Likewise. |
| (elf_m68k_plt_info): New table. |
| (CFV4E_PLT_ENTRY_SIZE): Rename to... |
| (ISAB_PLT_ENTRY_SIZE): ...this. |
| (CFV4E_FLAG): Delete. |
| (elf_cfv4e_plt0_entry): Rename to... |
| (elf_isab_plt0_entry): ...this. Adjust comments. Use (-6,%pc,%d0) |
| for the second instruction too. |
| (elf_cfv4e_plt_entry): Rename to... |
| (elf_isab_plt_entry): ...this. Adjust comments and use (-6,%pc,%d0). |
| (elf_isab_plt_info): New table. |
| (CPU32_FLAG): Delete. |
| (PLT_CPU32_ENTRY_SIZE): Rename to... |
| (CPU32_PLT_ENTRY_SIZE): ...this. |
| (elf_cpu32_plt0_entry): Update bounds accordingly. |
| (elf_cpu32_plt_entry): Likewise. |
| (elf_cpu32_plt_info): New table. |
| (elf_m68k_link_hash_table): Add a plt_info field. |
| (elf_m68k_link_hash_table_create): Initialize it. |
| (elf_m68k_get_plt_info): New function. |
| (elf_m68k_always_size_sections): Likewise. |
| (elf_m68k_adjust_dynamic_symbol): Use the plt_info hash table field. |
| (elf_m68k_install_pcrel_field): New function. |
| (elf_m68k_finish_dynamic_symbol): Factor code using plt_info and |
| elf_m68k_install_pcrel_field. |
| (elf_m68k_finish_dynamic_sections): Likewise. |
| (elf_m68k_plt_sym_val): Use elf_m68k_get_plt_info. |
| (elf_backend_always_size_sections): Define. |
| |
| 2006-04-26 Julian Brown <julian@codesourcery.com> |
| |
| * gas/config/tc-arm.c (parse_vfp_reg_list): Improve register bounds |
| checking. |
| (do_neon_mov): Enable several VMOV variants for VFP. Add suitable |
| architecture version checks. |
| (insns): Allow overlapping instructions to be used in VFP mode. |
| |
| * gas/testsuite/gas/arm/vfp-neon-overlap.s: New test. Overlapping |
| VFP/Neon instructions. |
| * gas/testsuite/gas/arm/vfp-neon-overlap.d: Expected output of above. |
| * gas/testsuite/gas/arm/vfp1xD.d: Test for fldmx/fstmx. |
| * gas/testsuite/gas/arm/vfp1xD_t2.d: Likewise. |
| * gas/testsuite/gas/arm/vfpv3-32drs.d: Likewise. |
| |
| * opcodes/arm-dis.c (coprocessor_opcodes): Don't interpret fldmx/fstmx |
| as vldm/vstm. |
| |
| 2006-04-26 Julian Brown <julian@codesourcery.com> |
| |
| * gas/config/tc-arm.c (neon_is_quarter_float): Move, and rename to... |
| (is_quarter_float): Rename from above. Simplify slightly. |
| (parse_qfloat_immediate): Parse a "quarter precision" floating-point |
| number. |
| (parse_neon_mov): Parse floating-point constants. |
| (neon_qfloat_bits): Fix encoding. |
| (neon_cmode_for_move_imm): Tweak to use floating-point encoding in |
| preference to integer encoding when using the F32 type. |
| |
| * gas/testsuite/gas/arm/neon-const.s: New testcase. Neon floating-point |
| constants. |
| * gas/testsuite/gas/arm/neon-const.d: Expected output of above. |
| * gas/testsuite/gas/arm/neon-cov.d: Expect floating-point disassembly |
| for VMOV.F32. |
| |
| * opcodes/arm-dis.c (print_insn_neon): Disassemble floating-point |
| constant VMOV. |
| |
| 2006-04-24 Julian Brown <julian@codesourcery.com> |
| |
| * libiberty/floatformat.c (floatformat_to_double): Fix (biased) |
| exponent=0 case. |
| |
| 2006-04-12 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * Makefile.tpl: Add install-html to install target deps. |
| * Makefile.in: Regenerate. |
| |
| 2006-04-07 Julian Brown <julian@codesourcery.com> |
| |
| * gas/config/tc-arm.c (neon_el_type): Make NT_invtype be the zero (so |
| zero-initialising structures containing it will lead to invalid |
| types). |
| (arm_it): Add vectype to each operand. |
| (NTA_HASTYPE, NTA_HASINDEX): Constants used in neon_typed_alias |
| defined field. |
| (neon_typed_alias): New structure. Extra information for typed |
| register aliases. |
| (reg_entry): Add neon type info field. |
| (arm_reg_parse): Remove RTYPE argument (revert to previous arguments). |
| Break out alternative syntax for coprocessor registers, etc. into... |
| (arm_reg_alt_syntax): New function. Alternate syntax handling broken |
| out from arm_reg_parse. |
| (parse_neon_type): Move. Return SUCCESS/FAIL. |
| (first_error): New function. Call to ensure first error which occurs |
| is reported. |
| (parse_neon_operand_type): Parse exactly one type. |
| (NEON_ALL_LANES, NEON_INTERLEAVE_LANES): Move. |
| (parse_typed_reg_or_scalar): New function. Handle core of both |
| arm_typed_reg_parse and parse_scalar. |
| (arm_typed_reg_parse): Parse a register with an optional type. |
| (NEON_SCALAR_REG, NEON_SCALAR_INDEX): Extract parts of parse_scalar |
| result. |
| (parse_scalar): Parse a Neon scalar with optional type. |
| (parse_reg_list): Use first_error. |
| (parse_vfp_reg_list): Use arm_typed_reg_parse instead of arm_reg_parse. |
| (neon_alias_types_same): New function. Return true if two (alias) types |
| are the same. |
| (parse_neon_el_struct_list): Use parse_typed_reg_or_scalar. Return type |
| of elements. |
| (insert_reg_alias): Return new reg_entry not void. |
| (insert_neon_reg_alias): New function. Insert type/index information as |
| well as register for alias. |
| (create_neon_reg_alias): New function. Parse .dn/.qn directives and |
| make typed register aliases accordingly. |
| (s_dn, s_qn): New functions. Handle incorrectly used .dn/.qn at start |
| of line. |
| (s_unreq): Delete type information if present. |
| (s_arm_unwind_save_mmxwr): Remove arg 3 from arm_reg_parse calls. |
| (s_arm_unwind_save_mmxwcg): Likewise. |
| (s_arm_unwind_movsp): Likewise. |
| (s_arm_unwind_setfp): Likewise. |
| (parse_shift): Likewise. |
| (parse_shifter_operand): Likewise. |
| (parse_address): Likewise. |
| (parse_tb): Likewise. |
| (tc_arm_regname_to_dw2regnum): Likewise. |
| (md_pseudo_table): Add dn, qn. |
| (parse_neon_mov): Handle typed operands. |
| (parse_operands): Likewise. |
| (neon_type_mask): Add N_SIZ. |
| (N_ALLMODS): New macro. |
| (neon_check_shape): Fix typo in NS_DDD_QQQ case. Use first_error. |
| (el_type_of_type_chk): Add some safeguards. |
| (modify_types_allowed): Fix logic bug. |
| (neon_check_type): Handle operands with types. |
| (neon_three_same): Remove redundant optional arg handling. |
| (do_neon_dyadic_i64_su, do_neon_shl_imm, do_neon_qshl_imm) |
| (do_neon_logic, do_neon_qdmulh, do_neon_fcmp_absolute) |
| (do_neon_step): Adjust accordingly. |
| (neon_cmode_for_logic_imm): Use first_error. |
| (do_neon_bitfield): Call neon_check_type. |
| (neon_dyadic): Rename to... |
| (neon_dyadic_misc): ...this. New name for neon_dyadic. Add bitfield to |
| allow modification of type of the destination. |
| (do_neon_dyadic_if_su, do_neon_dyadic_if_i, do_neon_dyadic_if_i_d) |
| (do_neon_addsub_if_i, do_neon_mul): Adjust accordingly. |
| (do_neon_compare): Make destination be an untyped bitfield. |
| (neon_scalar_for_mul): Use NEON_SCALAR_REG, NEON_SCALAR_INDEX. |
| (neon_mul_mac): Return early in case of errors. |
| (neon_move_immediate): Use first_error. |
| (neon_mac_reg_scalar_long): Fix type to include scalar. |
| (do_neon_dup): Likewise. |
| (do_neon_mov): Likewise (in several places). |
| (do_neon_tbl_tbx): Fix type. |
| (do_neon_ld_st_interleave, neon_alignment_bit, do_neon_ld_st_lane) |
| (do_neon_ld_dup): Exit early in case of errors and/or use first_error. |
| (opcode_lookup): Update for parse_neon_type returning SUCCESS/FAIL. |
| Handle .dn/.qn directives. |
| (REGDEF): Add zero for reg_entry neon field. |
| |
| * gas/testsuite/gas/arm/neon-psyn.s: Basic test of programmers syntax. |
| * gas/testsuite/gas/arm/neon-psyn.d: Expected output of above. |
| |
| 2006-04-03 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * Makefile.tpl: Add install-html target. |
| * Makefile.def: Add install-html target. |
| * Makefile.in: Regenerate. |
| * configure.in: Add --with-datarootdir, --with-docdir, |
| and --with-htmldir options. |
| * configure: Regenerate. |
| * opcodes/Makefile.am: Add install-html target. |
| * opcodes/Makefile.in: Regenerate. |
| * libiberty/Makefile.in: Add install-html, install-html-am, and |
| install-html-recursive targets. Define mkdir_p and |
| NORMAL_INSTALL. |
| * libiberty/configure.ac: AC_SUBST datarootdir, docdir, htmldir. |
| * libiberty/configure: Regenerate. |
| * libiberty/testsuite/Makefile.in: Add install-html and html targets. |
| * ld/Makefile.am: Add install-html, install-html-am, and |
| install-html-recursive targets. |
| * ld/Makefile.in: Regenerate. |
| * ld/configure.in: AC_SUBST datarootdir, docdir, htmldir. |
| * ld/configure: Regenerate. |
| * ld/po/Make-in: Add install-html target. |
| * intl/Makefile.in: Add html info and dvi and install-html to .PHONY |
| Add install-html target. |
| * gprof/po/Make-in: Add install-html target. |
| * gprof/Makefile.am: Add install-html, install-html-am and |
| install-html-recursive targets. |
| * gprof/Makefile.in: Regenerate. |
| * gprof/configure.in: AC_SUBST datarootdir, docdir, htmldir. |
| * gprof/configure: Regenerate. |
| * gas/po/Make-in: Add install-html target. |
| * gas/Makefile.am: Add install-html and install-html-recursive targets. |
| * gas/Makefile.in: Regenerate. |
| * gas/configure.in: AC_SUBST datarootdir, docdir, htmldir. |
| * gas/configure: Regenerate. |
| * gas/doc/Makefile.am: Add install-html and install-html-am targets. |
| * gas/doc/Makefile.in: Regenerate. |
| * binutils/po/Make-in: Add install-html target. |
| * binutils/Makefile.am: Add install-html and install-html-recursive targets. |
| * binutils/Makefile.in: Regenerate. |
| * binutils/configure.in: AC_SUBST datarootdir, docdir and htmldir. |
| * binutils/configure: Regenerate. |
| * binutils/doc/Makefile.am: Add install-html and install-html-am targets. |
| * binutils/doc/Makefile.in: Regenerate. |
| * bfd/po/Make-in: Add install-html target. |
| * bfd/Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir |
| htmldir. Add install-html and install-html-recursive targets. |
| * bfd/Makefile.in: Regenerate. |
| * bfd/configure.in: AC_SUBST for datarootdir, docdir and htmldir. |
| * bfd/configure: Regenerate. |
| * bfd/doc/Makefile.am: Add install-html and install-html-am targets. |
| Define datarootdir, docdir and htmldir. |
| * bfd/doc/Makefile.in: Regenerate. |
| * etc/Makefile.in: Add install-html target. Add htmldir, |
| docdir and datarootdir. |
| * etc/configure.texi: Document install-html target. |
| * etc/configure.in: AC_SUBST datarootdir, docdir, htmldir. |
| * etc/configure: Regenerate. |
| |
| 2005-04-03 Julian Brown <julian@codesourcery.com> |
| Nathan Sidwell <nathan@codesourcery.com> |
| |
| * binutils/readelf.c (arm_attr_tag_VFP_arch): Add VFPv3. |
| |
| * gas/config/tc-arm.c (limits.h): Include. |
| (fpu_arch_vfp_v3, fpu_vfp_ext_v3, fpu_neon_ext_v1) |
| (fpu_vfp_v3_or_neon_ext): Declare constants. |
| (neon_el_type): New enumeration of types for Neon vector elements. |
| (neon_type_el): New struct. Define type and size of a vector element. |
| (NEON_MAX_TYPE_ELS): Define constant. The maximum number of types per |
| instruction. |
| (neon_type): Define struct. The type of an instruction. |
| (arm_it): Add 'vectype' for the current instruction. |
| (isscalar, immisalign, regisimm, isquad): New predicates for operands. |
| (vfp_sp_reg_pos): Rename to... |
| (vfp_reg_pos): ...this, and add VFP_REG_Dd, VFP_REG_Dm, VFP_REG_Dn |
| tags. |
| (arm_reg_type): Add REG_TYPE_NQ (Neon Q register) and REG_TYPE_NDQ |
| (Neon D or Q register). |
| (reg_expected_msgs): Sync with above. Allow VFD to mean VFP or Neon |
| D register. |
| (GE_OPT_PREFIX_BIG): Define constant, for use in... |
| (my_get_expression): Allow above constant as argument to accept |
| 64-bit constants with optional prefix. |
| (arm_reg_parse): Add extra argument to return the specific type of |
| register in when either a D or Q register (REG_TYPE_NDQ) is requested. |
| Can be NULL. |
| (parse_scalar): New function. Parse Neon scalar (vector reg and index). |
| (parse_reg_list): Update for new arm_reg_parse args. |
| (parse_vfp_reg_list): Allow parsing of Neon D/Q register lists. |
| (parse_neon_el_struct_list): New function. Parse element/structure |
| register lists for VLD<n>/VST<n> instructions. |
| (s_arm_unwind_save_vfp): Update for new parse_vfp_reg_list args. |
| (s_arm_unwind_save_mmxwr): Likewise. |
| (s_arm_unwind_save_mmxwcg): Likewise. |
| (s_arm_unwind_movsp): Likewise. |
| (s_arm_unwind_setfp): Likewise. |
| (parse_big_immediate): New function. Parse an immediate, which may |
| be 64 bits wide. Put results in inst.operands[i]. |
| (parse_shift): Update for new arm_reg_parse args. |
| (parse_address): Likewise. Add parsing of alignment specifiers. |
| (parse_neon_mov): Parse the operands of a VMOV instruction. |
| (operand_parse_code): Add OP_RND, OP_RNQ, OP_RNDQ, OP_RNSC, |
| OP_NRDLST, OP_NSTRLST, OP_NILO, OP_RNDQ_I0, OP_RR_RNSC, |
| OP_RNDQ_RNSC, OP_RND_RNSC, OP_VMOV, OP_RNDQ_IMVNb, OP_RNDQ_I63b, |
| OP_I0, OP_I16z, OP_I32z, OP_I64, OP_I64z, OP_oI32b, OP_oRND, |
| OP_oRNQ, OP_oRNDQ. |
| (parse_operands): Handle new codes above. |
| (encode_arm_vfp_sp_reg): Rename to... |
| (encode_arm_vfp_reg): ...this. Handle D regs (0-31) too. Complain if |
| selected VFP version only supports D0-D15. |
| (do_vfp_sp_monadic, do_vfp_sp_dyadic, do_vfp_sp_compare_z) |
| (do_vfp_dp_sp_cvt, do_vfp_reg_from_sp, do_vfp_reg2_from_sp2) |
| (do_vfp_sp_from_reg, do_vfp_sp2_from_reg2, do_vfp_sp_ldst) |
| (do_vfp_dp_ldst, vfp_sp_ldstm, vfp_dp_ldstm): Update for new |
| encode_arm_vfp_reg name, and allow 32 D regs. |
| (do_vfp_dp_rd_rm, do_vfp_dp_rn_rd, do_vfp_dp_rd_rn) |
| (do_vfp_dp_rd_rn_rm, do_vfp_rm_rd_rn): New functions to encode VFP |
| insns allowing 32 D regs. |
| (do_vfp_sp_const, do_vfp_dp_const, vfp_conv, do_vfp_sp_conv_16) |
| (do_vfp_dp_conv_16, do_vfp_sp_conv_32, do_vfp_dp_conv_32): Handle |
| constant-load and conversion insns introduced with VFPv3. |
| (neon_tab_entry): New struct. |
| (NEON_ENC_TAB): Bit patterns for overloaded Neon instructions, and |
| those which are the targets of pseudo-instructions. |
| (neon_opc): Enumerate opcodes, use as indices into... |
| (neon_enc_tab): ...this. Hold data from NEON_ENC_TAB. |
| (NEON_ENC_INTEGER, NEON_ENC_ARMREG, NEON_ENC_POLY, NEON_ENC_FLOAT) |
| (NEON_ENC_SCALAR, NEON_ENC_IMMED, NEON_ENC_INTERLV, NEON_ENC_LANE) |
| (NEON_ENC_DUP): Define meaningful helper macros to look up values in |
| neon_enc_tab. |
| (neon_shape): Enumerate shapes (permitted register widths, etc.) for |
| Neon instructions. |
| (neon_type_mask): New. Compact type representation for type |
| checking. |
| (N_SU_ALL, N_SU_32, N_SU_16_64, N_SUF_32, N_I_ALL, N_IF_32): Common |
| permitted type combinations. |
| (N_IGNORE_TYPE): New macro. |
| (neon_check_shape): New function. Check an instruction shape for |
| multiple alternatives. Return the specific shape for the current |
| instruction. |
| (neon_modify_type_size): New function. Modify a vector type and |
| size, depending on the bit mask in argument 1. |
| (neon_type_promote): New function. Convert a given "key" type (of an |
| operand) into the correct type for a different operand, based on a bit |
| mask. |
| (type_chk_of_el_type): New function. Convert a type and size into the |
| compact representation used for type checking. |
| (el_type_of_type_ckh): New function. Reverse of above (only when a |
| single bit is set in the bit mask). |
| (modify_types_allowed): New function. Alter a mask of allowed types |
| based on a bit mask of modifications. |
| (neon_check_type): New function. Check the type of the current |
| instruction against the variable argument list. The "key" type of the |
| instruction is returned. |
| (neon_dp_fixup): New function. Fill in and modify instruction bits for |
| a Neon data-processing instruction depending on whether we're in ARM |
| mode or Thumb-2 mode. |
| (neon_logbits): New function. |
| (neon_three_same, neon_two_same, do_neon_dyadic_i_su) |
| (do_neon_dyadic_i64_su, neon_imm_shift, do_neon_shl_imm) |
| (do_neon_qshl_imm, neon_cmode_for_logic_imm) |
| (neon_bits_same_in_bytes, neon_squash_bits, neon_is_quarter_float) |
| (neon_qfloat_bits, neon_cmode_for_move_imm, neon_write_immbits) |
| (neon_invert_size, do_neon_logic, do_neon_bitfield, neon_dyadic) |
| (do_neon_dyadic_if_su, do_neon_dyadic_if_su_d, do_neon_dyadic_if_i) |
| (do_neon_dyadic_if_i_d, do_neon_addsub_if_i, neon_exchange_operands) |
| (neon_compare, do_neon_cmp, do_neon_cmp_inv, do_neon_ceq) |
| (neon_scalar_for_mul, neon_mul_mac, do_neon_mac_maybe_scalar) |
| (do_neon_tst, do_neon_mul, do_neon_qdmulh, do_neon_fcmp_absolute) |
| (do_neon_fcmp_absolute_inv, do_neon_step, do_neon_abs_neg) |
| (do_neon_sli, do_neon_sri, do_neon_qshlu_imm, do_neon_qmovn) |
| (do_neon_qmovun, do_neon_rshift_sat_narrow) |
| (do_neon_rshift_sat_narrow_u, do_neon_movn, do_neon_rshift_narrow) |
| (do_neon_shll, neon_cvt_flavour, do_neon_cvt, neon_move_immediate) |
| (do_neon_mvn, neon_mixed_length, do_neon_dyadic_long, do_neon_abal) |
| (neon_mac_reg_scalar_long, do_neon_mac_maybe_scalar_long) |
| (do_neon_dyadic_wide, do_neon_vmull, do_neon_ext, do_neon_rev) |
| (do_neon_dup, do_neon_mov, do_neon_rshift_round_imm, do_neon_movl) |
| (do_neon_trn, do_neon_zip_uzp, do_neon_sat_abs_neg) |
| (do_neon_pair_long, do_neon_recip_est, do_neon_cls, do_neon_clz) |
| (do_neon_cnt, do_neon_swp, do_neon_tbl_tbx, do_neon_ldm_stm) |
| (do_neon_ldr_str, do_neon_ld_st_interleave, neon_alignment_bit) |
| (do_neon_ld_st_lane, do_neon_ld_dup, do_neon_ldx_stx): New |
| functions. Neon bit encoding and encoding helpers. |
| (parse_neon_type): New function. Parse Neon type specifier. |
| (opcode_lookup): Allow parsing of Neon type specifiers. |
| (REGNUM2, REGSETH, REGSET2): New macros. |
| (reg_names): Add new VFPv3 and Neon registers. |
| (NUF, nUF, NCE, nCE): New macros for opcode table. |
| (insns): More VFP registers allowed in fcpyd, fmdhr, fmdlr, fmrdh, |
| fmrdl, fabsd, fnegd, fsqrtd, faddd, fsubd, fmuld, fdivd, fmacd, |
| fmscd, fnmuld, fnmacd, fnmscd, fcmpd, fcmpzd, fcmped, fcmpezd, |
| fmdrr, fmrrd. Add Neon instructions vaba, vhadd, vrhadd, vhsub, |
| vqadd, vqsub, vrshl, vqrshl, vshl, vqshl{u}, vand, vbic, vorr, vorn, |
| veor, vbsl, vbit, vbif, vabd, vmax, vmin, vcge, vcgt, vclt, vcle, |
| vceq, vpmax, vpmin, vmla, vmls, vpadd, vadd, vsub, vtst, vmul, |
| vqdmulh, vqrdmulh, vacge, vacgt, vaclt, vacle, vrecps, vrsqrts, |
| vabs, vneg, v{r}shr, v{r}sra, vsli, vsri, vqshrn, vq{r}shr{u}n, |
| v{r}shrn, vshll, vcvt, vmov, vmvn, vabal, vabdl, vaddl, vsubl, |
| vmlal, vmlsl, vaddw, vsubw, v{r}addhn, v{r}subhn, vqdmlal, vqdmlsl, |
| vqdmull, vmull, vext, vrev64, vrev32, vrev16, vdup, vmovl, v{q}movn, |
| vzip, vuzp, vqabs, vqneg, vpadal, vpaddl, vrecpe, vrsqrte, vcls, |
| vclz, vcnt, vswp, vtrn, vtbl, vtbx, vldm, vstm, vldr, vstr, |
| vld[1234], vst[1234], fconst[sd], f[us][lh]to[sd], fto[us][lh][sd]. |
| (tc_arm_regname_to_dw2regnum): Update for arm_reg_parse args. |
| (arm_cpu_option_table): Add Neon and VFPv3 to Cortex-A8. |
| (arm_option_cpu_value): Add vfp3 and neon. |
| (aeabi_set_public_attributes): Support VFPv3 and NEON attributes. |
| Fix VFPv1 attribute. |
| |
| * gas/testsuite/gas/arm/copro.s: Avoid ldcl which encodes as a bad Neon |
| instruction. |
| * gas/testsuite/gas/arm/copro.d: Update accordingly. |
| * gas/testsuite/gas/arm/neon-cond.s: New test. Conditional Neon opcodes |
| in ARM mode. |
| * gas/testsuite/gas/arm/neon-cond.d: Expected results of above. |
| * gas/testsuite/gas/arm/neon-cov.s: New test. Coverage of Neon |
| instructions. |
| * gas/testsuite/gas/arm/neon-cov.d: Expected results of above. |
| * gas/testsuite/gas/arm/neon-ldst-es.s: New test. Element and structure |
| loads and stores. |
| * gas/testsuite/gas/arm/neon-ldst-es.d: Expected results of above. |
| * gas/testsuite/gas/arm/neon-ldst-rm.s: New test. Single and multiple |
| register loads and stores. |
| * gas/testsuite/gas/arm/neon-ldst-rm.d: Expected results of above. |
| * gas/testsuite/gas/arm/neon-omit.s: New test. Omission of optional |
| operands. |
| * gas/testsuite/gas/arm/neon-omit.d: Expected results of above. |
| * gas/testsuite/gas/arm/vfp1.d: Expect Neon syntax for some VFP |
| instructions. |
| * gas/testsuite/gas/arm/vfp1_t2.d: Likewise. |
| * gas/testsuite/gas/arm/vfp1xD.d: Likewise. |
| * gas/testsuite/gas/arm/vfp1xD_t2.d: Likewise. |
| * gas/testsuite/gas/arm/vfp2.d: Likewise. |
| * gas/testsuite/gas/arm/vfp2_t2.d: Likewise. |
| * gas/testsuite/gas/arm/vfp3-32drs.s: New test. Extended D register |
| range for VFP instructions. |
| * gas/testsuite/gas/arm/vfp3-32drs.d: Expected results of above. |
| * gas/testsuite/gas/arm/vfp3-const-conv.s: New test. VFPv3 |
| constant-load and conversion instructions. |
| * gas/testsuite/gas/arm/vfp3-const-conv.d: Expected results of above. |
| |
| * include/opcode/arm.h (FPU_VFP_EXT_V3): Define constant. |
| (FPU_NEON_EXT_V1): Likewise. |
| (FPU_VFP_HARD): Update. |
| (FPU_VFP_V3): Define macro. |
| (FPU_ARCH_VFP_V3, FPU_ARCH_VFP_V3_PLUS_NEON_V1): Define macros. |
| |
| * opcodes/arm-dis.c (coprocessor_opcodes): Add %A, %B, %k, |
| convert %<code>[zy] into %[zy]<code>. Expand meaning of |
| %<bitfield>['`?]. |
| Add unified load/store instruction names. |
| (neon_opcode_table): New. |
| (arm_opcodes): Expand meaning of %<bitfield>['`?]. |
| (arm_decode_bitfield): New. |
| (print_insn_coprocessor): Add pc argument. Add %A & %B specifiers. |
| Use arm_decode_bitfield and adjust numeric specifiers. |
| Adjust %z & %y. |
| (print_insn_neon): New. |
| (print_insn_arm): Adjust print_insn_coprocessor call. Call |
| print_insn_neon. Use arm_decode_bitfield and adjust numeric specifiers. |
| (print_insn_thumb32): Likewise. |
| |
| 2005-04-01 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (arm_fix_adjustable): Return 0 for function symbols. |
| |
| 2006-03-30 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/configure.ac: Add cygpath for mingw hosts. |
| * libiberty.configure: Rebuilt. |
| * libiberty/Makefile.in: Add cygpath. |
| * libiberty/cygpath.c: New. |
| |
| 2006-03-30 Jim Blandy <jimb@codesourcery.com> |
| |
| * include/libiberty.h (pex_write_input): New declaration. |
| |
| * libiberty/pex-common.c (pex_write_input): New function. |
| * libiberty/pexecute.txh (pex_write_input): Document it. |
| * libiberty/pex-common.h (struct pex_funcs): New function ptr fdopenw. |
| * libiberty/pex-unix.c (pex_unix_fdopenw): New function. |
| (funcs): List it as our fdopenw function. |
| * libiberty/pex-win32.c (pex_win32_fdopenw): New function. |
| (funcs): List it as our fdopenw function. |
| * libiberty/pex-djgpp.c (funcs): Leave fdopenw null. |
| * libiberty/pex-msdos (funcs): Same. |
| * libiberty/functions.texi: Regenerated. |
| |
| * libiberty/pex-common.h (struct pex_obj): Doc fixes. |
| |
| * libiberty/functions.texi: Regenerate. |
| |
| 2006-03-27 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/pex-win32.c (pex_win32_exec_child): Close stdout/stderr |
| in parent. |
| |
| 2006-03-26 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gas/config/tc-m68k.c (m68k_init_arch): Move checking of |
| cfloat/m68881 to correct architecture before using it. |
| |
| 2006-03-21 Paul Brook <paul@codesourcery.com> |
| |
| * gas/config/tc-arm.c (md_apply_fix): Fix typo in offset mask. |
| |
| 2006-03-21 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * gas/config/tc-m68k.c (find_cf_chip): Merge into ... |
| (m68k_ip): ... here. Use for all chips. Protect against buffer |
| overrun and avoid excessive copying. |
| |
| * gcc/config/tc-m68k.c (m68000_control_regs, m68010_control_regs, |
| m68020_control_regs, m68040_control_regs, m68060_control_regs, |
| mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs, |
| mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs, |
| mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ... |
| (m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl, |
| mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl, |
| mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl, |
| mcf5282_ctrl, mcfv4e_ctrl): ... these. |
| (mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New. |
| (struct m68k_cpu): Change chip field to control_regs. |
| (current_chip): Remove. |
| (control_regs): New. |
| (m68k_archs, m68k_extensions): Adjust. |
| (m68k_cpus): Reorder to be in cpu number order. Adjust. |
| (CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove. |
| (find_cf_chip): Reimplement for new organization of cpu table. |
| (select_control_regs): Remove. |
| (mri_chip): Adjust. |
| (struct save_opts): Save control regs, not chip. |
| (s_save, s_restore): Adjust. |
| (m68k_lookup_cpu): Give deprecated warning when necessary. |
| (m68k_init_arch): Adjust. |
| (md_show_usage): Adjust for new cpu table organization. |
| * include/opcode/m68k.h (cpu_m68k, cpu_cf, cpu_m68000, cpu_m68008, |
| cpu_m68010, cpu_m68020, cpu_m68ec030, cpu_m68040, cpu_m68060, |
| cpu_m68851, cpu_m68881, cpu_m68882, cpu_cpu32, cpu_cf5200, cpu_cf5206e, |
| cpu_cf5208, cpu_cf521x, cpu_cf5213, cpu_cf5249, cpu_cf528x, |
| cpu_cf5307, cpu_cf5329, cpu_cf5407, cpu_cf547x, cpu_cf548x): Remove. |
| |
| 2006-03-20 Mark Mitchell <mark@codesourcery.com> |
| |
| * libiberty/pex-win32.c (<errno.h>): Include. |
| (fix_argv): Remove. |
| (argv_to_cmdline): New function. |
| (std_suffixes): New variable. |
| (no_suffixes): Likewise. |
| (find_executable): New function. |
| (win32_spawn): Likewise. |
| (spawn_script): Use win32_spawn instead of _spawnv[p]. |
| (pex_win32_exec_child): Replace MSVCRT calls with Win32 API calls. |
| (pex_win32_wait): Likewise. |
| |
| 2006-03-21 Richard Sandiford <richard@codesourcery.com> |
| |
| * bfd/cpu-m68k.c (bfd_m68k_compatible): Treat ISA A+ and ISA B code as |
| incompatible. Likewise MAC and EMAC code. |
| * bfd/elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Use |
| bfd_get_compatible to set the new bfd architecture. Rely on it |
| to detect incompatibilities. |
| * gas/config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use |
| mcfemac instead of mcfmac. |
| * ld/testsuite/ld-m68k/merge-error-1a.s, |
| * ld/testsuite/ld-m68k/merge-error-1b.s, |
| * ld/testsuite/ld-m68k/merge-error-1a.d, |
| * ld/testsuite/ld-m68k/merge-error-1b.d, |
| * ld/testsuite/ld-m68k/merge-error-1c.d, |
| * ld/testsuite/ld-m68k/merge-error-1d.d, |
| * ld/testsuite/ld-m68k/merge-error-1e.d, |
| * ld/testsuite/ld-m68k/merge-ok-1a.d, |
| * ld/testsuite/ld-m68k/merge-ok-1b.d: New tests. |
| * ld/testsuite/ld-m68k/m68k.exp: Run them. |
| |
| 2006-03-20 Paul Brook <paul@codesourcery.com> |
| |
| * gas/config/tc-arm.c (insns): Correct opcodes for ldrbt and strbt. |
| * gas/testsuite/gas/arm/thumb32.d: Correct expected output. |
| |
| 2006-03-20 Paul Brook <paul@codesourcery.com> |
| |
| * gas/config/tc-arm.c (parse_operands): Set default error message. |
| |
| 2006-03-20 Paul Brook <paul@codesourcery.com> |
| |
| * gas/config/tc-arm.c (parse_tb): Set inst.error before returning FAIL. |
| |
| 2006-03-20 Paul Brook <paul@codesourcery.com> |
| |
| * gas/config/tc-arm.c (md_apply_fix): Set H bit on blx instruction. |
| |
| * gas/testsuite/gas/arm/blx-local.d: New test. |
| * gas/testsuite/gas/arm/blx-local.d: New test. |
| |
| 2006-03-20 Paul Brook <paul@codesourcery.com> |
| |
| * gas/config/tc-arm.c (THUMB2_LOAD_BIT): Define. |
| (move_or_literal_pool): Handle Thumb-2 instructions. |
| (do_t_ldst): Call move_or_literal_pool for =N addressing modes. |
| |
| * gas/testsuite/gas/arm/thumb2_pool.d: New test. |
| * gas/testsuite/gas/arm/thumb2_pool.s: New test. |
