| \input texinfo @c -*- texinfo -*- |
| @setfilename gdbint.info |
| @include gdb-cfg.texi |
| @dircategory Programming & development tools. |
| @direntry |
| * Gdb-Internals: (gdbint). The GNU debugger's internals. |
| @end direntry |
| |
| @ifinfo |
| This file documents the internals of the GNU debugger @value{GDBN}. |
| Copyright 1990,1991,1992,1993,1994,1996,1998,1999,2000,2001,2002,2003 |
| Free Software Foundation, Inc. |
| Contributed by Cygnus Solutions. Written by John Gilmore. |
| Second Edition by Stan Shebs. |
| |
| Permission is granted to copy, distribute and/or modify this document |
| under the terms of the GNU Free Documentation License, Version 1.1 or |
| any later version published by the Free Software Foundation; with no |
| Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,'' |
| and with the Back-Cover Texts as in (a) below. |
| |
| (a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify |
| this GNU Manual, like GNU software. Copies published by the Free |
| Software Foundation raise funds for GNU development.'' |
| @end ifinfo |
| |
| @setchapternewpage off |
| @settitle @value{GDBN} Internals |
| |
| @syncodeindex fn cp |
| @syncodeindex vr cp |
| |
| @titlepage |
| @title @value{GDBN} Internals |
| @subtitle{A guide to the internals of the GNU debugger} |
| @author John Gilmore |
| @author Cygnus Solutions |
| @author Second Edition: |
| @author Stan Shebs |
| @author Cygnus Solutions |
| @page |
| @tex |
| \def\$#1${{#1}} % Kluge: collect RCS revision info without $...$ |
| \xdef\manvers{\$Revision$} % For use in headers, footers too |
| {\parskip=0pt |
| \hfill Cygnus Solutions\par |
| \hfill \manvers\par |
| \hfill \TeX{}info \texinfoversion\par |
| } |
| @end tex |
| |
| @vskip 0pt plus 1filll |
| Copyright @copyright{} 1990,1991,1992,1993,1994,1996,1998,1999,2000,2001, |
| 2002, 2003 Free Software Foundation, Inc. |
| |
| Permission is granted to copy, distribute and/or modify this document |
| under the terms of the GNU Free Documentation License, Version 1.1 or |
| any later version published by the Free Software Foundation; with no |
| Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,'' |
| and with the Back-Cover Texts as in (a) below. |
| |
| (a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify |
| this GNU Manual, like GNU software. Copies published by the Free |
| Software Foundation raise funds for GNU development.'' |
| @end titlepage |
| |
| @contents |
| |
| @node Top |
| @c Perhaps this should be the title of the document (but only for info, |
| @c not for TeX). Existing GNU manuals seem inconsistent on this point. |
| @top Scope of this Document |
| |
| This document documents the internals of the GNU debugger, @value{GDBN}. It |
| includes description of @value{GDBN}'s key algorithms and operations, as well |
| as the mechanisms that adapt @value{GDBN} to specific hosts and targets. |
| |
| @menu |
| * Requirements:: |
| * Overall Structure:: |
| * Algorithms:: |
| * User Interface:: |
| * libgdb:: |
| * Symbol Handling:: |
| * Language Support:: |
| * Host Definition:: |
| * Target Architecture Definition:: |
| * Target Vector Definition:: |
| * Native Debugging:: |
| * Support Libraries:: |
| * Coding:: |
| * Porting GDB:: |
| * Releasing GDB:: |
| * Testsuite:: |
| * Hints:: |
| |
| * GDB Observers:: @value{GDBN} Currently available observers |
| * GNU Free Documentation License:: The license for this documentation |
| * Index:: |
| @end menu |
| |
| @node Requirements |
| |
| @chapter Requirements |
| @cindex requirements for @value{GDBN} |
| |
| Before diving into the internals, you should understand the formal |
| requirements and other expectations for @value{GDBN}. Although some |
| of these may seem obvious, there have been proposals for @value{GDBN} |
| that have run counter to these requirements. |
| |
| First of all, @value{GDBN} is a debugger. It's not designed to be a |
| front panel for embedded systems. It's not a text editor. It's not a |
| shell. It's not a programming environment. |
| |
| @value{GDBN} is an interactive tool. Although a batch mode is |
| available, @value{GDBN}'s primary role is to interact with a human |
| programmer. |
| |
| @value{GDBN} should be responsive to the user. A programmer hot on |
| the trail of a nasty bug, and operating under a looming deadline, is |
| going to be very impatient of everything, including the response time |
| to debugger commands. |
| |
| @value{GDBN} should be relatively permissive, such as for expressions. |
| While the compiler should be picky (or have the option to be made |
| picky), since source code lives for a long time usually, the |
| programmer doing debugging shouldn't be spending time figuring out to |
| mollify the debugger. |
| |
| @value{GDBN} will be called upon to deal with really large programs. |
| Executable sizes of 50 to 100 megabytes occur regularly, and we've |
| heard reports of programs approaching 1 gigabyte in size. |
| |
| @value{GDBN} should be able to run everywhere. No other debugger is |
| available for even half as many configurations as @value{GDBN} |
| supports. |
| |
| |
| @node Overall Structure |
| |
| @chapter Overall Structure |
| |
| @value{GDBN} consists of three major subsystems: user interface, |
| symbol handling (the @dfn{symbol side}), and target system handling (the |
| @dfn{target side}). |
| |
| The user interface consists of several actual interfaces, plus |
| supporting code. |
| |
| The symbol side consists of object file readers, debugging info |
| interpreters, symbol table management, source language expression |
| parsing, type and value printing. |
| |
| The target side consists of execution control, stack frame analysis, and |
| physical target manipulation. |
| |
| The target side/symbol side division is not formal, and there are a |
| number of exceptions. For instance, core file support involves symbolic |
| elements (the basic core file reader is in BFD) and target elements (it |
| supplies the contents of memory and the values of registers). Instead, |
| this division is useful for understanding how the minor subsystems |
| should fit together. |
| |
| @section The Symbol Side |
| |
| The symbolic side of @value{GDBN} can be thought of as ``everything |
| you can do in @value{GDBN} without having a live program running''. |
| For instance, you can look at the types of variables, and evaluate |
| many kinds of expressions. |
| |
| @section The Target Side |
| |
| The target side of @value{GDBN} is the ``bits and bytes manipulator''. |
| Although it may make reference to symbolic info here and there, most |
| of the target side will run with only a stripped executable |
| available---or even no executable at all, in remote debugging cases. |
| |
| Operations such as disassembly, stack frame crawls, and register |
| display, are able to work with no symbolic info at all. In some cases, |
| such as disassembly, @value{GDBN} will use symbolic info to present addresses |
| relative to symbols rather than as raw numbers, but it will work either |
| way. |
| |
| @section Configurations |
| |
| @cindex host |
| @cindex target |
| @dfn{Host} refers to attributes of the system where @value{GDBN} runs. |
| @dfn{Target} refers to the system where the program being debugged |
| executes. In most cases they are the same machine, in which case a |
| third type of @dfn{Native} attributes come into play. |
| |
| Defines and include files needed to build on the host are host support. |
| Examples are tty support, system defined types, host byte order, host |
| float format. |
| |
| Defines and information needed to handle the target format are target |
| dependent. Examples are the stack frame format, instruction set, |
| breakpoint instruction, registers, and how to set up and tear down the stack |
| to call a function. |
| |
| Information that is only needed when the host and target are the same, |
| is native dependent. One example is Unix child process support; if the |
| host and target are not the same, doing a fork to start the target |
| process is a bad idea. The various macros needed for finding the |
| registers in the @code{upage}, running @code{ptrace}, and such are all |
| in the native-dependent files. |
| |
| Another example of native-dependent code is support for features that |
| are really part of the target environment, but which require |
| @code{#include} files that are only available on the host system. Core |
| file handling and @code{setjmp} handling are two common cases. |
| |
| When you want to make @value{GDBN} work ``native'' on a particular machine, you |
| have to include all three kinds of information. |
| |
| |
| @node Algorithms |
| |
| @chapter Algorithms |
| @cindex algorithms |
| |
| @value{GDBN} uses a number of debugging-specific algorithms. They are |
| often not very complicated, but get lost in the thicket of special |
| cases and real-world issues. This chapter describes the basic |
| algorithms and mentions some of the specific target definitions that |
| they use. |
| |
| @section Frames |
| |
| @cindex frame |
| @cindex call stack frame |
| A frame is a construct that @value{GDBN} uses to keep track of calling |
| and called functions. |
| |
| @findex create_new_frame |
| @vindex FRAME_FP |
| @code{FRAME_FP} in the machine description has no meaning to the |
| machine-independent part of @value{GDBN}, except that it is used when |
| setting up a new frame from scratch, as follows: |
| |
| @smallexample |
| create_new_frame (read_register (FP_REGNUM), read_pc ())); |
| @end smallexample |
| |
| @cindex frame pointer register |
| Other than that, all the meaning imparted to @code{FP_REGNUM} is |
| imparted by the machine-dependent code. So, @code{FP_REGNUM} can have |
| any value that is convenient for the code that creates new frames. |
| (@code{create_new_frame} calls @code{DEPRECATED_INIT_EXTRA_FRAME_INFO} |
| if it is defined; that is where you should use the @code{FP_REGNUM} |
| value, if your frames are nonstandard.) |
| |
| @cindex frame chain |
| Given a @value{GDBN} frame, define @code{DEPRECATED_FRAME_CHAIN} to |
| determine the address of the calling function's frame. This will be |
| used to create a new @value{GDBN} frame struct, and then |
| @code{DEPRECATED_INIT_EXTRA_FRAME_INFO} and |
| @code{DEPRECATED_INIT_FRAME_PC} will be called for the new frame. |
| |
| @section Breakpoint Handling |
| |
| @cindex breakpoints |
| In general, a breakpoint is a user-designated location in the program |
| where the user wants to regain control if program execution ever reaches |
| that location. |
| |
| There are two main ways to implement breakpoints; either as ``hardware'' |
| breakpoints or as ``software'' breakpoints. |
| |
| @cindex hardware breakpoints |
| @cindex program counter |
| Hardware breakpoints are sometimes available as a builtin debugging |
| features with some chips. Typically these work by having dedicated |
| register into which the breakpoint address may be stored. If the PC |
| (shorthand for @dfn{program counter}) |
| ever matches a value in a breakpoint registers, the CPU raises an |
| exception and reports it to @value{GDBN}. |
| |
| Another possibility is when an emulator is in use; many emulators |
| include circuitry that watches the address lines coming out from the |
| processor, and force it to stop if the address matches a breakpoint's |
| address. |
| |
| A third possibility is that the target already has the ability to do |
| breakpoints somehow; for instance, a ROM monitor may do its own |
| software breakpoints. So although these are not literally ``hardware |
| breakpoints'', from @value{GDBN}'s point of view they work the same; |
| @value{GDBN} need not do nothing more than set the breakpoint and wait |
| for something to happen. |
| |
| Since they depend on hardware resources, hardware breakpoints may be |
| limited in number; when the user asks for more, @value{GDBN} will |
| start trying to set software breakpoints. (On some architectures, |
| notably the 32-bit x86 platforms, @value{GDBN} cannot always know |
| whether there's enough hardware resources to insert all the hardware |
| breakpoints and watchpoints. On those platforms, @value{GDBN} prints |
| an error message only when the program being debugged is continued.) |
| |
| @cindex software breakpoints |
| Software breakpoints require @value{GDBN} to do somewhat more work. |
| The basic theory is that @value{GDBN} will replace a program |
| instruction with a trap, illegal divide, or some other instruction |
| that will cause an exception, and then when it's encountered, |
| @value{GDBN} will take the exception and stop the program. When the |
| user says to continue, @value{GDBN} will restore the original |
| instruction, single-step, re-insert the trap, and continue on. |
| |
| Since it literally overwrites the program being tested, the program area |
| must be writable, so this technique won't work on programs in ROM. It |
| can also distort the behavior of programs that examine themselves, |
| although such a situation would be highly unusual. |
| |
| Also, the software breakpoint instruction should be the smallest size of |
| instruction, so it doesn't overwrite an instruction that might be a jump |
| target, and cause disaster when the program jumps into the middle of the |
| breakpoint instruction. (Strictly speaking, the breakpoint must be no |
| larger than the smallest interval between instructions that may be jump |
| targets; perhaps there is an architecture where only even-numbered |
| instructions may jumped to.) Note that it's possible for an instruction |
| set not to have any instructions usable for a software breakpoint, |
| although in practice only the ARC has failed to define such an |
| instruction. |
| |
| @findex BREAKPOINT |
| The basic definition of the software breakpoint is the macro |
| @code{BREAKPOINT}. |
| |
| Basic breakpoint object handling is in @file{breakpoint.c}. However, |
| much of the interesting breakpoint action is in @file{infrun.c}. |
| |
| @section Single Stepping |
| |
| @section Signal Handling |
| |
| @section Thread Handling |
| |
| @section Inferior Function Calls |
| |
| @section Longjmp Support |
| |
| @cindex @code{longjmp} debugging |
| @value{GDBN} has support for figuring out that the target is doing a |
| @code{longjmp} and for stopping at the target of the jump, if we are |
| stepping. This is done with a few specialized internal breakpoints, |
| which are visible in the output of the @samp{maint info breakpoint} |
| command. |
| |
| @findex GET_LONGJMP_TARGET |
| To make this work, you need to define a macro called |
| @code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf} |
| structure and extract the longjmp target address. Since @code{jmp_buf} |
| is target specific, you will need to define it in the appropriate |
| @file{tm-@var{target}.h} file. Look in @file{tm-sun4os4.h} and |
| @file{sparc-tdep.c} for examples of how to do this. |
| |
| @section Watchpoints |
| @cindex watchpoints |
| |
| Watchpoints are a special kind of breakpoints (@pxref{Algorithms, |
| breakpoints}) which break when data is accessed rather than when some |
| instruction is executed. When you have data which changes without |
| your knowing what code does that, watchpoints are the silver bullet to |
| hunt down and kill such bugs. |
| |
| @cindex hardware watchpoints |
| @cindex software watchpoints |
| Watchpoints can be either hardware-assisted or not; the latter type is |
| known as ``software watchpoints.'' @value{GDBN} always uses |
| hardware-assisted watchpoints if they are available, and falls back on |
| software watchpoints otherwise. Typical situations where @value{GDBN} |
| will use software watchpoints are: |
| |
| @itemize @bullet |
| @item |
| The watched memory region is too large for the underlying hardware |
| watchpoint support. For example, each x86 debug register can watch up |
| to 4 bytes of memory, so trying to watch data structures whose size is |
| more than 16 bytes will cause @value{GDBN} to use software |
| watchpoints. |
| |
| @item |
| The value of the expression to be watched depends on data held in |
| registers (as opposed to memory). |
| |
| @item |
| Too many different watchpoints requested. (On some architectures, |
| this situation is impossible to detect until the debugged program is |
| resumed.) Note that x86 debug registers are used both for hardware |
| breakpoints and for watchpoints, so setting too many hardware |
| breakpoints might cause watchpoint insertion to fail. |
| |
| @item |
| No hardware-assisted watchpoints provided by the target |
| implementation. |
| @end itemize |
| |
| Software watchpoints are very slow, since @value{GDBN} needs to |
| single-step the program being debugged and test the value of the |
| watched expression(s) after each instruction. The rest of this |
| section is mostly irrelevant for software watchpoints. |
| |
| @value{GDBN} uses several macros and primitives to support hardware |
| watchpoints: |
| |
| @table @code |
| @findex TARGET_HAS_HARDWARE_WATCHPOINTS |
| @item TARGET_HAS_HARDWARE_WATCHPOINTS |
| If defined, the target supports hardware watchpoints. |
| |
| @findex TARGET_CAN_USE_HARDWARE_WATCHPOINT |
| @item TARGET_CAN_USE_HARDWARE_WATCHPOINT (@var{type}, @var{count}, @var{other}) |
| Return the number of hardware watchpoints of type @var{type} that are |
| possible to be set. The value is positive if @var{count} watchpoints |
| of this type can be set, zero if setting watchpoints of this type is |
| not supported, and negative if @var{count} is more than the maximum |
| number of watchpoints of type @var{type} that can be set. @var{other} |
| is non-zero if other types of watchpoints are currently enabled (there |
| are architectures which cannot set watchpoints of different types at |
| the same time). |
| |
| @findex TARGET_REGION_OK_FOR_HW_WATCHPOINT |
| @item TARGET_REGION_OK_FOR_HW_WATCHPOINT (@var{addr}, @var{len}) |
| Return non-zero if hardware watchpoints can be used to watch a region |
| whose address is @var{addr} and whose length in bytes is @var{len}. |
| |
| @findex TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT |
| @item TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT (@var{size}) |
| Return non-zero if hardware watchpoints can be used to watch a region |
| whose size is @var{size}. @value{GDBN} only uses this macro as a |
| fall-back, in case @code{TARGET_REGION_OK_FOR_HW_WATCHPOINT} is not |
| defined. |
| |
| @findex TARGET_DISABLE_HW_WATCHPOINTS |
| @item TARGET_DISABLE_HW_WATCHPOINTS (@var{pid}) |
| Disables watchpoints in the process identified by @var{pid}. This is |
| used, e.g., on HP-UX which provides operations to disable and enable |
| the page-level memory protection that implements hardware watchpoints |
| on that platform. |
| |
| @findex TARGET_ENABLE_HW_WATCHPOINTS |
| @item TARGET_ENABLE_HW_WATCHPOINTS (@var{pid}) |
| Enables watchpoints in the process identified by @var{pid}. This is |
| used, e.g., on HP-UX which provides operations to disable and enable |
| the page-level memory protection that implements hardware watchpoints |
| on that platform. |
| |
| @findex target_insert_watchpoint |
| @findex target_remove_watchpoint |
| @item target_insert_watchpoint (@var{addr}, @var{len}, @var{type}) |
| @itemx target_remove_watchpoint (@var{addr}, @var{len}, @var{type}) |
| Insert or remove a hardware watchpoint starting at @var{addr}, for |
| @var{len} bytes. @var{type} is the watchpoint type, one of the |
| possible values of the enumerated data type @code{target_hw_bp_type}, |
| defined by @file{breakpoint.h} as follows: |
| |
| @smallexample |
| enum target_hw_bp_type |
| @{ |
| hw_write = 0, /* Common (write) HW watchpoint */ |
| hw_read = 1, /* Read HW watchpoint */ |
| hw_access = 2, /* Access (read or write) HW watchpoint */ |
| hw_execute = 3 /* Execute HW breakpoint */ |
| @}; |
| @end smallexample |
| |
| @noindent |
| These two macros should return 0 for success, non-zero for failure. |
| |
| @cindex insert or remove hardware breakpoint |
| @findex target_remove_hw_breakpoint |
| @findex target_insert_hw_breakpoint |
| @item target_remove_hw_breakpoint (@var{addr}, @var{shadow}) |
| @itemx target_insert_hw_breakpoint (@var{addr}, @var{shadow}) |
| Insert or remove a hardware-assisted breakpoint at address @var{addr}. |
| Returns zero for success, non-zero for failure. @var{shadow} is the |
| real contents of the byte where the breakpoint has been inserted; it |
| is generally not valid when hardware breakpoints are used, but since |
| no other code touches these values, the implementations of the above |
| two macros can use them for their internal purposes. |
| |
| @findex target_stopped_data_address |
| @item target_stopped_data_address () |
| If the inferior has some watchpoint that triggered, return the address |
| associated with that watchpoint. Otherwise, return zero. |
| |
| @findex DECR_PC_AFTER_HW_BREAK |
| @item DECR_PC_AFTER_HW_BREAK |
| If defined, @value{GDBN} decrements the program counter by the value |
| of @code{DECR_PC_AFTER_HW_BREAK} after a hardware break-point. This |
| overrides the value of @code{DECR_PC_AFTER_BREAK} when a breakpoint |
| that breaks is a hardware-assisted breakpoint. |
| |
| @findex HAVE_STEPPABLE_WATCHPOINT |
| @item HAVE_STEPPABLE_WATCHPOINT |
| If defined to a non-zero value, it is not necessary to disable a |
| watchpoint to step over it. |
| |
| @findex HAVE_NONSTEPPABLE_WATCHPOINT |
| @item HAVE_NONSTEPPABLE_WATCHPOINT |
| If defined to a non-zero value, @value{GDBN} should disable a |
| watchpoint to step the inferior over it. |
| |
| @findex HAVE_CONTINUABLE_WATCHPOINT |
| @item HAVE_CONTINUABLE_WATCHPOINT |
| If defined to a non-zero value, it is possible to continue the |
| inferior after a watchpoint has been hit. |
| |
| @findex CANNOT_STEP_HW_WATCHPOINTS |
| @item CANNOT_STEP_HW_WATCHPOINTS |
| If this is defined to a non-zero value, @value{GDBN} will remove all |
| watchpoints before stepping the inferior. |
| |
| @findex STOPPED_BY_WATCHPOINT |
| @item STOPPED_BY_WATCHPOINT (@var{wait_status}) |
| Return non-zero if stopped by a watchpoint. @var{wait_status} is of |
| the type @code{struct target_waitstatus}, defined by @file{target.h}. |
| @end table |
| |
| @subsection x86 Watchpoints |
| @cindex x86 debug registers |
| @cindex watchpoints, on x86 |
| |
| The 32-bit Intel x86 (a.k.a.@: ia32) processors feature special debug |
| registers designed to facilitate debugging. @value{GDBN} provides a |
| generic library of functions that x86-based ports can use to implement |
| support for watchpoints and hardware-assisted breakpoints. This |
| subsection documents the x86 watchpoint facilities in @value{GDBN}. |
| |
| To use the generic x86 watchpoint support, a port should do the |
| following: |
| |
| @itemize @bullet |
| @findex I386_USE_GENERIC_WATCHPOINTS |
| @item |
| Define the macro @code{I386_USE_GENERIC_WATCHPOINTS} somewhere in the |
| target-dependent headers. |
| |
| @item |
| Include the @file{config/i386/nm-i386.h} header file @emph{after} |
| defining @code{I386_USE_GENERIC_WATCHPOINTS}. |
| |
| @item |
| Add @file{i386-nat.o} to the value of the Make variable |
| @code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}) or |
| @code{TDEPFILES} (@pxref{Target Architecture Definition, TDEPFILES}). |
| |
| @item |
| Provide implementations for the @code{I386_DR_LOW_*} macros described |
| below. Typically, each macro should call a target-specific function |
| which does the real work. |
| @end itemize |
| |
| The x86 watchpoint support works by maintaining mirror images of the |
| debug registers. Values are copied between the mirror images and the |
| real debug registers via a set of macros which each target needs to |
| provide: |
| |
| @table @code |
| @findex I386_DR_LOW_SET_CONTROL |
| @item I386_DR_LOW_SET_CONTROL (@var{val}) |
| Set the Debug Control (DR7) register to the value @var{val}. |
| |
| @findex I386_DR_LOW_SET_ADDR |
| @item I386_DR_LOW_SET_ADDR (@var{idx}, @var{addr}) |
| Put the address @var{addr} into the debug register number @var{idx}. |
| |
| @findex I386_DR_LOW_RESET_ADDR |
| @item I386_DR_LOW_RESET_ADDR (@var{idx}) |
| Reset (i.e.@: zero out) the address stored in the debug register |
| number @var{idx}. |
| |
| @findex I386_DR_LOW_GET_STATUS |
| @item I386_DR_LOW_GET_STATUS |
| Return the value of the Debug Status (DR6) register. This value is |
| used immediately after it is returned by |
| @code{I386_DR_LOW_GET_STATUS}, so as to support per-thread status |
| register values. |
| @end table |
| |
| For each one of the 4 debug registers (whose indices are from 0 to 3) |
| that store addresses, a reference count is maintained by @value{GDBN}, |
| to allow sharing of debug registers by several watchpoints. This |
| allows users to define several watchpoints that watch the same |
| expression, but with different conditions and/or commands, without |
| wasting debug registers which are in short supply. @value{GDBN} |
| maintains the reference counts internally, targets don't have to do |
| anything to use this feature. |
| |
| The x86 debug registers can each watch a region that is 1, 2, or 4 |
| bytes long. The ia32 architecture requires that each watched region |
| be appropriately aligned: 2-byte region on 2-byte boundary, 4-byte |
| region on 4-byte boundary. However, the x86 watchpoint support in |
| @value{GDBN} can watch unaligned regions and regions larger than 4 |
| bytes (up to 16 bytes) by allocating several debug registers to watch |
| a single region. This allocation of several registers per a watched |
| region is also done automatically without target code intervention. |
| |
| The generic x86 watchpoint support provides the following API for the |
| @value{GDBN}'s application code: |
| |
| @table @code |
| @findex i386_region_ok_for_watchpoint |
| @item i386_region_ok_for_watchpoint (@var{addr}, @var{len}) |
| The macro @code{TARGET_REGION_OK_FOR_HW_WATCHPOINT} is set to call |
| this function. It counts the number of debug registers required to |
| watch a given region, and returns a non-zero value if that number is |
| less than 4, the number of debug registers available to x86 |
| processors. |
| |
| @findex i386_stopped_data_address |
| @item i386_stopped_data_address (void) |
| The macros @code{STOPPED_BY_WATCHPOINT} and |
| @code{target_stopped_data_address} are set to call this function. The |
| argument passed to @code{STOPPED_BY_WATCHPOINT} is ignored. This |
| function examines the breakpoint condition bits in the DR6 Debug |
| Status register, as returned by the @code{I386_DR_LOW_GET_STATUS} |
| macro, and returns the address associated with the first bit that is |
| set in DR6. |
| |
| @findex i386_insert_watchpoint |
| @findex i386_remove_watchpoint |
| @item i386_insert_watchpoint (@var{addr}, @var{len}, @var{type}) |
| @itemx i386_remove_watchpoint (@var{addr}, @var{len}, @var{type}) |
| Insert or remove a watchpoint. The macros |
| @code{target_insert_watchpoint} and @code{target_remove_watchpoint} |
| are set to call these functions. @code{i386_insert_watchpoint} first |
| looks for a debug register which is already set to watch the same |
| region for the same access types; if found, it just increments the |
| reference count of that debug register, thus implementing debug |
| register sharing between watchpoints. If no such register is found, |
| the function looks for a vacant debug register, sets its mirrored |
| value to @var{addr}, sets the mirrored value of DR7 Debug Control |
| register as appropriate for the @var{len} and @var{type} parameters, |
| and then passes the new values of the debug register and DR7 to the |
| inferior by calling @code{I386_DR_LOW_SET_ADDR} and |
| @code{I386_DR_LOW_SET_CONTROL}. If more than one debug register is |
| required to cover the given region, the above process is repeated for |
| each debug register. |
| |
| @code{i386_remove_watchpoint} does the opposite: it resets the address |
| in the mirrored value of the debug register and its read/write and |
| length bits in the mirrored value of DR7, then passes these new |
| values to the inferior via @code{I386_DR_LOW_RESET_ADDR} and |
| @code{I386_DR_LOW_SET_CONTROL}. If a register is shared by several |
| watchpoints, each time a @code{i386_remove_watchpoint} is called, it |
| decrements the reference count, and only calls |
| @code{I386_DR_LOW_RESET_ADDR} and @code{I386_DR_LOW_SET_CONTROL} when |
| the count goes to zero. |
| |
| @findex i386_insert_hw_breakpoint |
| @findex i386_remove_hw_breakpoint |
| @item i386_insert_hw_breakpoint (@var{addr}, @var{shadow} |
| @itemx i386_remove_hw_breakpoint (@var{addr}, @var{shadow}) |
| These functions insert and remove hardware-assisted breakpoints. The |
| macros @code{target_insert_hw_breakpoint} and |
| @code{target_remove_hw_breakpoint} are set to call these functions. |
| These functions work like @code{i386_insert_watchpoint} and |
| @code{i386_remove_watchpoint}, respectively, except that they set up |
| the debug registers to watch instruction execution, and each |
| hardware-assisted breakpoint always requires exactly one debug |
| register. |
| |
| @findex i386_stopped_by_hwbp |
| @item i386_stopped_by_hwbp (void) |
| This function returns non-zero if the inferior has some watchpoint or |
| hardware breakpoint that triggered. It works like |
| @code{i386_stopped_data_address}, except that it doesn't return the |
| address whose watchpoint triggered. |
| |
| @findex i386_cleanup_dregs |
| @item i386_cleanup_dregs (void) |
| This function clears all the reference counts, addresses, and control |
| bits in the mirror images of the debug registers. It doesn't affect |
| the actual debug registers in the inferior process. |
| @end table |
| |
| @noindent |
| @strong{Notes:} |
| @enumerate 1 |
| @item |
| x86 processors support setting watchpoints on I/O reads or writes. |
| However, since no target supports this (as of March 2001), and since |
| @code{enum target_hw_bp_type} doesn't even have an enumeration for I/O |
| watchpoints, this feature is not yet available to @value{GDBN} running |
| on x86. |
| |
| @item |
| x86 processors can enable watchpoints locally, for the current task |
| only, or globally, for all the tasks. For each debug register, |
| there's a bit in the DR7 Debug Control register that determines |
| whether the associated address is watched locally or globally. The |
| current implementation of x86 watchpoint support in @value{GDBN} |
| always sets watchpoints to be locally enabled, since global |
| watchpoints might interfere with the underlying OS and are probably |
| unavailable in many platforms. |
| @end enumerate |
| |
| @section Observing changes in @value{GDBN} internals |
| @cindex observer pattern interface |
| @cindex notifications about changes in internals |
| |
| In order to function properly, several modules need to be notified when |
| some changes occur in the @value{GDBN} internals. Traditionally, these |
| modules have relied on several paradigms, the most common ones being |
| hooks and gdb-events. Unfortunately, none of these paradigms was |
| versatile enough to become the standard notification mechanism in |
| @value{GDBN}. The fact that they only supported one ``client'' was also |
| a strong limitation. |
| |
| A new paradigm, based on the Observer pattern of the @cite{Design |
| Patterns} book, has therefore been implemented. The goal was to provide |
| a new interface overcoming the issues with the notification mechanisms |
| previously available. This new interface needed to be strongly typed, |
| easy to extend, and versatile enough to be used as the standard |
| interface when adding new notifications. |
| |
| See @ref{GDB Observers} for a brief description of the observers |
| currently implemented in GDB. The rationale for the current |
| implementation is also briefly discussed. |
| |
| @node User Interface |
| |
| @chapter User Interface |
| |
| @value{GDBN} has several user interfaces. Although the command-line interface |
| is the most common and most familiar, there are others. |
| |
| @section Command Interpreter |
| |
| @cindex command interpreter |
| @cindex CLI |
| The command interpreter in @value{GDBN} is fairly simple. It is designed to |
| allow for the set of commands to be augmented dynamically, and also |
| has a recursive subcommand capability, where the first argument to |
| a command may itself direct a lookup on a different command list. |
| |
| For instance, the @samp{set} command just starts a lookup on the |
| @code{setlist} command list, while @samp{set thread} recurses |
| to the @code{set_thread_cmd_list}. |
| |
| @findex add_cmd |
| @findex add_com |
| To add commands in general, use @code{add_cmd}. @code{add_com} adds to |
| the main command list, and should be used for those commands. The usual |
| place to add commands is in the @code{_initialize_@var{xyz}} routines at |
| the ends of most source files. |
| |
| @findex add_setshow_cmd |
| @findex add_setshow_cmd_full |
| To add paired @samp{set} and @samp{show} commands, use |
| @code{add_setshow_cmd} or @code{add_setshow_cmd_full}. The former is |
| a slightly simpler interface which is useful when you don't need to |
| further modify the new command structures, while the latter returns |
| the new command structures for manipulation. |
| |
| @cindex deprecating commands |
| @findex deprecate_cmd |
| Before removing commands from the command set it is a good idea to |
| deprecate them for some time. Use @code{deprecate_cmd} on commands or |
| aliases to set the deprecated flag. @code{deprecate_cmd} takes a |
| @code{struct cmd_list_element} as it's first argument. You can use the |
| return value from @code{add_com} or @code{add_cmd} to deprecate the |
| command immediately after it is created. |
| |
| The first time a command is used the user will be warned and offered a |
| replacement (if one exists). Note that the replacement string passed to |
| @code{deprecate_cmd} should be the full name of the command, i.e. the |
| entire string the user should type at the command line. |
| |
| @section UI-Independent Output---the @code{ui_out} Functions |
| @c This section is based on the documentation written by Fernando |
| @c Nasser <fnasser@redhat.com>. |
| |
| @cindex @code{ui_out} functions |
| The @code{ui_out} functions present an abstraction level for the |
| @value{GDBN} output code. They hide the specifics of different user |
| interfaces supported by @value{GDBN}, and thus free the programmer |
| from the need to write several versions of the same code, one each for |
| every UI, to produce output. |
| |
| @subsection Overview and Terminology |
| |
| In general, execution of each @value{GDBN} command produces some sort |
| of output, and can even generate an input request. |
| |
| Output can be generated for the following purposes: |
| |
| @itemize @bullet |
| @item |
| to display a @emph{result} of an operation; |
| |
| @item |
| to convey @emph{info} or produce side-effects of a requested |
| operation; |
| |
| @item |
| to provide a @emph{notification} of an asynchronous event (including |
| progress indication of a prolonged asynchronous operation); |
| |
| @item |
| to display @emph{error messages} (including warnings); |
| |
| @item |
| to show @emph{debug data}; |
| |
| @item |
| to @emph{query} or prompt a user for input (a special case). |
| @end itemize |
| |
| @noindent |
| This section mainly concentrates on how to build result output, |
| although some of it also applies to other kinds of output. |
| |
| Generation of output that displays the results of an operation |
| involves one or more of the following: |
| |
| @itemize @bullet |
| @item |
| output of the actual data |
| |
| @item |
| formatting the output as appropriate for console output, to make it |
| easily readable by humans |
| |
| @item |
| machine oriented formatting--a more terse formatting to allow for easy |
| parsing by programs which read @value{GDBN}'s output |
| |
| @item |
| annotation, whose purpose is to help legacy GUIs to identify interesting |
| parts in the output |
| @end itemize |
| |
| The @code{ui_out} routines take care of the first three aspects. |
| Annotations are provided by separate annotation routines. Note that use |
| of annotations for an interface between a GUI and @value{GDBN} is |
| deprecated. |
| |
| Output can be in the form of a single item, which we call a @dfn{field}; |
| a @dfn{list} consisting of identical fields; a @dfn{tuple} consisting of |
| non-identical fields; or a @dfn{table}, which is a tuple consisting of a |
| header and a body. In a BNF-like form: |
| |
| @table @code |
| @item <table> @expansion{} |
| @code{<header> <body>} |
| @item <header> @expansion{} |
| @code{@{ <column> @}} |
| @item <column> @expansion{} |
| @code{<width> <alignment> <title>} |
| @item <body> @expansion{} |
| @code{@{<row>@}} |
| @end table |
| |
| |
| @subsection General Conventions |
| |
| Most @code{ui_out} routines are of type @code{void}, the exceptions are |
| @code{ui_out_stream_new} (which returns a pointer to the newly created |
| object) and the @code{make_cleanup} routines. |
| |
| The first parameter is always the @code{ui_out} vector object, a pointer |
| to a @code{struct ui_out}. |
| |
| The @var{format} parameter is like in @code{printf} family of functions. |
| When it is present, there must also be a variable list of arguments |
| sufficient used to satisfy the @code{%} specifiers in the supplied |
| format. |
| |
| When a character string argument is not used in a @code{ui_out} function |
| call, a @code{NULL} pointer has to be supplied instead. |
| |
| |
| @subsection Table, Tuple and List Functions |
| |
| @cindex list output functions |
| @cindex table output functions |
| @cindex tuple output functions |
| This section introduces @code{ui_out} routines for building lists, |
| tuples and tables. The routines to output the actual data items |
| (fields) are presented in the next section. |
| |
| To recap: A @dfn{tuple} is a sequence of @dfn{fields}, each field |
| containing information about an object; a @dfn{list} is a sequence of |
| fields where each field describes an identical object. |
| |
| Use the @dfn{table} functions when your output consists of a list of |
| rows (tuples) and the console output should include a heading. Use this |
| even when you are listing just one object but you still want the header. |
| |
| @cindex nesting level in @code{ui_out} functions |
| Tables can not be nested. Tuples and lists can be nested up to a |
| maximum of five levels. |
| |
| The overall structure of the table output code is something like this: |
| |
| @smallexample |
| ui_out_table_begin |
| ui_out_table_header |
| @dots{} |
| ui_out_table_body |
| ui_out_tuple_begin |
| ui_out_field_* |
| @dots{} |
| ui_out_tuple_end |
| @dots{} |
| ui_out_table_end |
| @end smallexample |
| |
| Here is the description of table-, tuple- and list-related @code{ui_out} |
| functions: |
| |
| @deftypefun void ui_out_table_begin (struct ui_out *@var{uiout}, int @var{nbrofcols}, int @var{nr_rows}, const char *@var{tblid}) |
| The function @code{ui_out_table_begin} marks the beginning of the output |
| of a table. It should always be called before any other @code{ui_out} |
| function for a given table. @var{nbrofcols} is the number of columns in |
| the table. @var{nr_rows} is the number of rows in the table. |
| @var{tblid} is an optional string identifying the table. The string |
| pointed to by @var{tblid} is copied by the implementation of |
| @code{ui_out_table_begin}, so the application can free the string if it |
| was @code{malloc}ed. |
| |
| The companion function @code{ui_out_table_end}, described below, marks |
| the end of the table's output. |
| @end deftypefun |
| |
| @deftypefun void ui_out_table_header (struct ui_out *@var{uiout}, int @var{width}, enum ui_align @var{alignment}, const char *@var{colhdr}) |
| @code{ui_out_table_header} provides the header information for a single |
| table column. You call this function several times, one each for every |
| column of the table, after @code{ui_out_table_begin}, but before |
| @code{ui_out_table_body}. |
| |
| The value of @var{width} gives the column width in characters. The |
| value of @var{alignment} is one of @code{left}, @code{center}, and |
| @code{right}, and it specifies how to align the header: left-justify, |
| center, or right-justify it. @var{colhdr} points to a string that |
| specifies the column header; the implementation copies that string, so |
| column header strings in @code{malloc}ed storage can be freed after the |
| call. |
| @end deftypefun |
| |
| @deftypefun void ui_out_table_body (struct ui_out *@var{uiout}) |
| This function delimits the table header from the table body. |
| @end deftypefun |
| |
| @deftypefun void ui_out_table_end (struct ui_out *@var{uiout}) |
| This function signals the end of a table's output. It should be called |
| after the table body has been produced by the list and field output |
| functions. |
| |
| There should be exactly one call to @code{ui_out_table_end} for each |
| call to @code{ui_out_table_begin}, otherwise the @code{ui_out} functions |
| will signal an internal error. |
| @end deftypefun |
| |
| The output of the tuples that represent the table rows must follow the |
| call to @code{ui_out_table_body} and precede the call to |
| @code{ui_out_table_end}. You build a tuple by calling |
| @code{ui_out_tuple_begin} and @code{ui_out_tuple_end}, with suitable |
| calls to functions which actually output fields between them. |
| |
| @deftypefun void ui_out_tuple_begin (struct ui_out *@var{uiout}, const char *@var{id}) |
| This function marks the beginning of a tuple output. @var{id} points |
| to an optional string that identifies the tuple; it is copied by the |
| implementation, and so strings in @code{malloc}ed storage can be freed |
| after the call. |
| @end deftypefun |
| |
| @deftypefun void ui_out_tuple_end (struct ui_out *@var{uiout}) |
| This function signals an end of a tuple output. There should be exactly |
| one call to @code{ui_out_tuple_end} for each call to |
| @code{ui_out_tuple_begin}, otherwise an internal @value{GDBN} error will |
| be signaled. |
| @end deftypefun |
| |
| @deftypefun struct cleanup *make_cleanup_ui_out_tuple_begin_end (struct ui_out *@var{uiout}, const char *@var{id}) |
| This function first opens the tuple and then establishes a cleanup |
| (@pxref{Coding, Cleanups}) to close the tuple. It provides a convenient |
| and correct implementation of the non-portable@footnote{The function |
| cast is not portable ISO C.} code sequence: |
| @smallexample |
| struct cleanup *old_cleanup; |
| ui_out_tuple_begin (uiout, "..."); |
| old_cleanup = make_cleanup ((void(*)(void *)) ui_out_tuple_end, |
| uiout); |
| @end smallexample |
| @end deftypefun |
| |
| @deftypefun void ui_out_list_begin (struct ui_out *@var{uiout}, const char *@var{id}) |
| This function marks the beginning of a list output. @var{id} points to |
| an optional string that identifies the list; it is copied by the |
| implementation, and so strings in @code{malloc}ed storage can be freed |
| after the call. |
| @end deftypefun |
| |
| @deftypefun void ui_out_list_end (struct ui_out *@var{uiout}) |
| This function signals an end of a list output. There should be exactly |
| one call to @code{ui_out_list_end} for each call to |
| @code{ui_out_list_begin}, otherwise an internal @value{GDBN} error will |
| be signaled. |
| @end deftypefun |
| |
| @deftypefun struct cleanup *make_cleanup_ui_out_list_begin_end (struct ui_out *@var{uiout}, const char *@var{id}) |
| Similar to @code{make_cleanup_ui_out_tuple_begin_end}, this function |
| opens a list and then establishes cleanup (@pxref{Coding, Cleanups}) |
| that will close the list.list. |
| @end deftypefun |
| |
| @subsection Item Output Functions |
| |
| @cindex item output functions |
| @cindex field output functions |
| @cindex data output |
| The functions described below produce output for the actual data |
| items, or fields, which contain information about the object. |
| |
| Choose the appropriate function accordingly to your particular needs. |
| |
| @deftypefun void ui_out_field_fmt (struct ui_out *@var{uiout}, char *@var{fldname}, char *@var{format}, ...) |
| This is the most general output function. It produces the |
| representation of the data in the variable-length argument list |
| according to formatting specifications in @var{format}, a |
| @code{printf}-like format string. The optional argument @var{fldname} |
| supplies the name of the field. The data items themselves are |
| supplied as additional arguments after @var{format}. |
| |
| This generic function should be used only when it is not possible to |
| use one of the specialized versions (see below). |
| @end deftypefun |
| |
| @deftypefun void ui_out_field_int (struct ui_out *@var{uiout}, const char *@var{fldname}, int @var{value}) |
| This function outputs a value of an @code{int} variable. It uses the |
| @code{"%d"} output conversion specification. @var{fldname} specifies |
| the name of the field. |
| @end deftypefun |
| |
| @deftypefun void ui_out_field_fmt_int (struct ui_out *@var{uiout}, int @var{width}, enum ui_align @var{alignment}, const char *@var{fldname}, int @var{value}) |
| This function outputs a value of an @code{int} variable. It differs from |
| @code{ui_out_field_int} in that the caller specifies the desired @var{width} and @var{alignment} of the output. |
| @var{fldname} specifies |
| the name of the field. |
| @end deftypefun |
| |
| @deftypefun void ui_out_field_core_addr (struct ui_out *@var{uiout}, const char *@var{fldname}, CORE_ADDR @var{address}) |
| This function outputs an address. |
| @end deftypefun |
| |
| @deftypefun void ui_out_field_string (struct ui_out *@var{uiout}, const char *@var{fldname}, const char *@var{string}) |
| This function outputs a string using the @code{"%s"} conversion |
| specification. |
| @end deftypefun |
| |
| Sometimes, there's a need to compose your output piece by piece using |
| functions that operate on a stream, such as @code{value_print} or |
| @code{fprintf_symbol_filtered}. These functions accept an argument of |
| the type @code{struct ui_file *}, a pointer to a @code{ui_file} object |
| used to store the data stream used for the output. When you use one |
| of these functions, you need a way to pass their results stored in a |
| @code{ui_file} object to the @code{ui_out} functions. To this end, |
| you first create a @code{ui_stream} object by calling |
| @code{ui_out_stream_new}, pass the @code{stream} member of that |
| @code{ui_stream} object to @code{value_print} and similar functions, |
| and finally call @code{ui_out_field_stream} to output the field you |
| constructed. When the @code{ui_stream} object is no longer needed, |
| you should destroy it and free its memory by calling |
| @code{ui_out_stream_delete}. |
| |
| @deftypefun struct ui_stream *ui_out_stream_new (struct ui_out *@var{uiout}) |
| This function creates a new @code{ui_stream} object which uses the |
| same output methods as the @code{ui_out} object whose pointer is |
| passed in @var{uiout}. It returns a pointer to the newly created |
| @code{ui_stream} object. |
| @end deftypefun |
| |
| @deftypefun void ui_out_stream_delete (struct ui_stream *@var{streambuf}) |
| This functions destroys a @code{ui_stream} object specified by |
| @var{streambuf}. |
| @end deftypefun |
| |
| @deftypefun void ui_out_field_stream (struct ui_out *@var{uiout}, const char *@var{fieldname}, struct ui_stream *@var{streambuf}) |
| This function consumes all the data accumulated in |
| @code{streambuf->stream} and outputs it like |
| @code{ui_out_field_string} does. After a call to |
| @code{ui_out_field_stream}, the accumulated data no longer exists, but |
| the stream is still valid and may be used for producing more fields. |
| @end deftypefun |
| |
| @strong{Important:} If there is any chance that your code could bail |
| out before completing output generation and reaching the point where |
| @code{ui_out_stream_delete} is called, it is necessary to set up a |
| cleanup, to avoid leaking memory and other resources. Here's a |
| skeleton code to do that: |
| |
| @smallexample |
| struct ui_stream *mybuf = ui_out_stream_new (uiout); |
| struct cleanup *old = make_cleanup (ui_out_stream_delete, mybuf); |
| ... |
| do_cleanups (old); |
| @end smallexample |
| |
| If the function already has the old cleanup chain set (for other kinds |
| of cleanups), you just have to add your cleanup to it: |
| |
| @smallexample |
| mybuf = ui_out_stream_new (uiout); |
| make_cleanup (ui_out_stream_delete, mybuf); |
| @end smallexample |
| |
| Note that with cleanups in place, you should not call |
| @code{ui_out_stream_delete} directly, or you would attempt to free the |
| same buffer twice. |
| |
| @subsection Utility Output Functions |
| |
| @deftypefun void ui_out_field_skip (struct ui_out *@var{uiout}, const char *@var{fldname}) |
| This function skips a field in a table. Use it if you have to leave |
| an empty field without disrupting the table alignment. The argument |
| @var{fldname} specifies a name for the (missing) filed. |
| @end deftypefun |
| |
| @deftypefun void ui_out_text (struct ui_out *@var{uiout}, const char *@var{string}) |
| This function outputs the text in @var{string} in a way that makes it |
| easy to be read by humans. For example, the console implementation of |
| this method filters the text through a built-in pager, to prevent it |
| from scrolling off the visible portion of the screen. |
| |
| Use this function for printing relatively long chunks of text around |
| the actual field data: the text it produces is not aligned according |
| to the table's format. Use @code{ui_out_field_string} to output a |
| string field, and use @code{ui_out_message}, described below, to |
| output short messages. |
| @end deftypefun |
| |
| @deftypefun void ui_out_spaces (struct ui_out *@var{uiout}, int @var{nspaces}) |
| This function outputs @var{nspaces} spaces. It is handy to align the |
| text produced by @code{ui_out_text} with the rest of the table or |
| list. |
| @end deftypefun |
| |
| @deftypefun void ui_out_message (struct ui_out *@var{uiout}, int @var{verbosity}, const char *@var{format}, ...) |
| This function produces a formatted message, provided that the current |
| verbosity level is at least as large as given by @var{verbosity}. The |
| current verbosity level is specified by the user with the @samp{set |
| verbositylevel} command.@footnote{As of this writing (April 2001), |
| setting verbosity level is not yet implemented, and is always returned |
| as zero. So calling @code{ui_out_message} with a @var{verbosity} |
| argument more than zero will cause the message to never be printed.} |
| @end deftypefun |
| |
| @deftypefun void ui_out_wrap_hint (struct ui_out *@var{uiout}, char *@var{indent}) |
| This function gives the console output filter (a paging filter) a hint |
| of where to break lines which are too long. Ignored for all other |
| output consumers. @var{indent}, if non-@code{NULL}, is the string to |
| be printed to indent the wrapped text on the next line; it must remain |
| accessible until the next call to @code{ui_out_wrap_hint}, or until an |
| explicit newline is produced by one of the other functions. If |
| @var{indent} is @code{NULL}, the wrapped text will not be indented. |
| @end deftypefun |
| |
| @deftypefun void ui_out_flush (struct ui_out *@var{uiout}) |
| This function flushes whatever output has been accumulated so far, if |
| the UI buffers output. |
| @end deftypefun |
| |
| |
| @subsection Examples of Use of @code{ui_out} functions |
| |
| @cindex using @code{ui_out} functions |
| @cindex @code{ui_out} functions, usage examples |
| This section gives some practical examples of using the @code{ui_out} |
| functions to generalize the old console-oriented code in |
| @value{GDBN}. The examples all come from functions defined on the |
| @file{breakpoints.c} file. |
| |
| This example, from the @code{breakpoint_1} function, shows how to |
| produce a table. |
| |
| The original code was: |
| |
| @smallexample |
| if (!found_a_breakpoint++) |
| @{ |
| annotate_breakpoints_headers (); |
| |
| annotate_field (0); |
| printf_filtered ("Num "); |
| annotate_field (1); |
| printf_filtered ("Type "); |
| annotate_field (2); |
| printf_filtered ("Disp "); |
| annotate_field (3); |
| printf_filtered ("Enb "); |
| if (addressprint) |
| @{ |
| annotate_field (4); |
| printf_filtered ("Address "); |
| @} |
| annotate_field (5); |
| printf_filtered ("What\n"); |
| |
| annotate_breakpoints_table (); |
| @} |
| @end smallexample |
| |
| Here's the new version: |
| |
| @smallexample |
| nr_printable_breakpoints = @dots{}; |
| |
| if (addressprint) |
| ui_out_table_begin (ui, 6, nr_printable_breakpoints, "BreakpointTable"); |
| else |
| ui_out_table_begin (ui, 5, nr_printable_breakpoints, "BreakpointTable"); |
| |
| if (nr_printable_breakpoints > 0) |
| annotate_breakpoints_headers (); |
| if (nr_printable_breakpoints > 0) |
| annotate_field (0); |
| ui_out_table_header (uiout, 3, ui_left, "number", "Num"); /* 1 */ |
| if (nr_printable_breakpoints > 0) |
| annotate_field (1); |
| ui_out_table_header (uiout, 14, ui_left, "type", "Type"); /* 2 */ |
| if (nr_printable_breakpoints > 0) |
| annotate_field (2); |
| ui_out_table_header (uiout, 4, ui_left, "disp", "Disp"); /* 3 */ |
| if (nr_printable_breakpoints > 0) |
| annotate_field (3); |
| ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb"); /* 4 */ |
| if (addressprint) |
| @{ |
| if (nr_printable_breakpoints > 0) |
| annotate_field (4); |
| if (TARGET_ADDR_BIT <= 32) |
| ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */ |
| else |
| ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */ |
| @} |
| if (nr_printable_breakpoints > 0) |
| annotate_field (5); |
| ui_out_table_header (uiout, 40, ui_noalign, "what", "What"); /* 6 */ |
| ui_out_table_body (uiout); |
| if (nr_printable_breakpoints > 0) |
| annotate_breakpoints_table (); |
| @end smallexample |
| |
| This example, from the @code{print_one_breakpoint} function, shows how |
| to produce the actual data for the table whose structure was defined |
| in the above example. The original code was: |
| |
| @smallexample |
| annotate_record (); |
| annotate_field (0); |
| printf_filtered ("%-3d ", b->number); |
| annotate_field (1); |
| if ((int)b->type > (sizeof(bptypes)/sizeof(bptypes[0])) |
| || ((int) b->type != bptypes[(int) b->type].type)) |
| internal_error ("bptypes table does not describe type #%d.", |
| (int)b->type); |
| printf_filtered ("%-14s ", bptypes[(int)b->type].description); |
| annotate_field (2); |
| printf_filtered ("%-4s ", bpdisps[(int)b->disposition]); |
| annotate_field (3); |
| printf_filtered ("%-3c ", bpenables[(int)b->enable]); |
| @dots{} |
| @end smallexample |
| |
| This is the new version: |
| |
| @smallexample |
| annotate_record (); |
| ui_out_tuple_begin (uiout, "bkpt"); |
| annotate_field (0); |
| ui_out_field_int (uiout, "number", b->number); |
| annotate_field (1); |
| if (((int) b->type > (sizeof (bptypes) / sizeof (bptypes[0]))) |
| || ((int) b->type != bptypes[(int) b->type].type)) |
| internal_error ("bptypes table does not describe type #%d.", |
| (int) b->type); |
| ui_out_field_string (uiout, "type", bptypes[(int)b->type].description); |
| annotate_field (2); |
| ui_out_field_string (uiout, "disp", bpdisps[(int)b->disposition]); |
| annotate_field (3); |
| ui_out_field_fmt (uiout, "enabled", "%c", bpenables[(int)b->enable]); |
| @dots{} |
| @end smallexample |
| |
| This example, also from @code{print_one_breakpoint}, shows how to |
| produce a complicated output field using the @code{print_expression} |
| functions which requires a stream to be passed. It also shows how to |
| automate stream destruction with cleanups. The original code was: |
| |
| @smallexample |
| annotate_field (5); |
| print_expression (b->exp, gdb_stdout); |
| @end smallexample |
| |
| The new version is: |
| |
| @smallexample |
| struct ui_stream *stb = ui_out_stream_new (uiout); |
| struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb); |
| ... |
| annotate_field (5); |
| print_expression (b->exp, stb->stream); |
| ui_out_field_stream (uiout, "what", local_stream); |
| @end smallexample |
| |
| This example, also from @code{print_one_breakpoint}, shows how to use |
| @code{ui_out_text} and @code{ui_out_field_string}. The original code |
| was: |
| |
| @smallexample |
| annotate_field (5); |
| if (b->dll_pathname == NULL) |
| printf_filtered ("<any library> "); |
| else |
| printf_filtered ("library \"%s\" ", b->dll_pathname); |
| @end smallexample |
| |
| It became: |
| |
| @smallexample |
| annotate_field (5); |
| if (b->dll_pathname == NULL) |
| @{ |
| ui_out_field_string (uiout, "what", "<any library>"); |
| ui_out_spaces (uiout, 1); |
| @} |
| else |
| @{ |
| ui_out_text (uiout, "library \""); |
| ui_out_field_string (uiout, "what", b->dll_pathname); |
| ui_out_text (uiout, "\" "); |
| @} |
| @end smallexample |
| |
| The following example from @code{print_one_breakpoint} shows how to |
| use @code{ui_out_field_int} and @code{ui_out_spaces}. The original |
| code was: |
| |
| @smallexample |
| annotate_field (5); |
| if (b->forked_inferior_pid != 0) |
| printf_filtered ("process %d ", b->forked_inferior_pid); |
| @end smallexample |
| |
| It became: |
| |
| @smallexample |
| annotate_field (5); |
| if (b->forked_inferior_pid != 0) |
| @{ |
| ui_out_text (uiout, "process "); |
| ui_out_field_int (uiout, "what", b->forked_inferior_pid); |
| ui_out_spaces (uiout, 1); |
| @} |
| @end smallexample |
| |
| Here's an example of using @code{ui_out_field_string}. The original |
| code was: |
| |
| @smallexample |
| annotate_field (5); |
| if (b->exec_pathname != NULL) |
| printf_filtered ("program \"%s\" ", b->exec_pathname); |
| @end smallexample |
| |
| It became: |
| |
| @smallexample |
| annotate_field (5); |
| if (b->exec_pathname != NULL) |
| @{ |
| ui_out_text (uiout, "program \""); |
| ui_out_field_string (uiout, "what", b->exec_pathname); |
| ui_out_text (uiout, "\" "); |
| @} |
| @end smallexample |
| |
| Finally, here's an example of printing an address. The original code: |
| |
| @smallexample |
| annotate_field (4); |
| printf_filtered ("%s ", |
| local_hex_string_custom ((unsigned long) b->address, "08l")); |
| @end smallexample |
| |
| It became: |
| |
| @smallexample |
| annotate_field (4); |
| ui_out_field_core_addr (uiout, "Address", b->address); |
| @end smallexample |
| |
| |
| @section Console Printing |
| |
| @section TUI |
| |
| @node libgdb |
| |
| @chapter libgdb |
| |
| @section libgdb 1.0 |
| @cindex @code{libgdb} |
| @code{libgdb} 1.0 was an abortive project of years ago. The theory was |
| to provide an API to @value{GDBN}'s functionality. |
| |
| @section libgdb 2.0 |
| @cindex @code{libgdb} |
| @code{libgdb} 2.0 is an ongoing effort to update @value{GDBN} so that is |
| better able to support graphical and other environments. |
| |
| Since @code{libgdb} development is on-going, its architecture is still |
| evolving. The following components have so far been identified: |
| |
| @itemize @bullet |
| @item |
| Observer - @file{gdb-events.h}. |
| @item |
| Builder - @file{ui-out.h} |
| @item |
| Event Loop - @file{event-loop.h} |
| @item |
| Library - @file{gdb.h} |
| @end itemize |
| |
| The model that ties these components together is described below. |
| |
| @section The @code{libgdb} Model |
| |
| A client of @code{libgdb} interacts with the library in two ways. |
| |
| @itemize @bullet |
| @item |
| As an observer (using @file{gdb-events}) receiving notifications from |
| @code{libgdb} of any internal state changes (break point changes, run |
| state, etc). |
| @item |
| As a client querying @code{libgdb} (using the @file{ui-out} builder) to |
| obtain various status values from @value{GDBN}. |
| @end itemize |
| |
| Since @code{libgdb} could have multiple clients (e.g. a GUI supporting |
| the existing @value{GDBN} CLI), those clients must co-operate when |
| controlling @code{libgdb}. In particular, a client must ensure that |
| @code{libgdb} is idle (i.e. no other client is using @code{libgdb}) |
| before responding to a @file{gdb-event} by making a query. |
| |
| @section CLI support |
| |
| At present @value{GDBN}'s CLI is very much entangled in with the core of |
| @code{libgdb}. Consequently, a client wishing to include the CLI in |
| their interface needs to carefully co-ordinate its own and the CLI's |
| requirements. |
| |
| It is suggested that the client set @code{libgdb} up to be bi-modal |
| (alternate between CLI and client query modes). The notes below sketch |
| out the theory: |
| |
| @itemize @bullet |
| @item |
| The client registers itself as an observer of @code{libgdb}. |
| @item |
| The client create and install @code{cli-out} builder using its own |
| versions of the @code{ui-file} @code{gdb_stderr}, @code{gdb_stdtarg} and |
| @code{gdb_stdout} streams. |
| @item |
| The client creates a separate custom @code{ui-out} builder that is only |
| used while making direct queries to @code{libgdb}. |
| @end itemize |
| |
| When the client receives input intended for the CLI, it simply passes it |
| along. Since the @code{cli-out} builder is installed by default, all |
| the CLI output in response to that command is routed (pronounced rooted) |
| through to the client controlled @code{gdb_stdout} et.@: al.@: streams. |
| At the same time, the client is kept abreast of internal changes by |
| virtue of being a @code{libgdb} observer. |
| |
| The only restriction on the client is that it must wait until |
| @code{libgdb} becomes idle before initiating any queries (using the |
| client's custom builder). |
| |
| @section @code{libgdb} components |
| |
| @subheading Observer - @file{gdb-events.h} |
| @file{gdb-events} provides the client with a very raw mechanism that can |
| be used to implement an observer. At present it only allows for one |
| observer and that observer must, internally, handle the need to delay |
| the processing of any event notifications until after @code{libgdb} has |
| finished the current command. |
| |
| @subheading Builder - @file{ui-out.h} |
| @file{ui-out} provides the infrastructure necessary for a client to |
| create a builder. That builder is then passed down to @code{libgdb} |
| when doing any queries. |
| |
| @subheading Event Loop - @file{event-loop.h} |
| @c There could be an entire section on the event-loop |
| @file{event-loop}, currently non-re-entrant, provides a simple event |
| loop. A client would need to either plug its self into this loop or, |
| implement a new event-loop that GDB would use. |
| |
| The event-loop will eventually be made re-entrant. This is so that |
| @value{GDB} can better handle the problem of some commands blocking |
| instead of returning. |
| |
| @subheading Library - @file{gdb.h} |
| @file{libgdb} is the most obvious component of this system. It provides |
| the query interface. Each function is parameterized by a @code{ui-out} |
| builder. The result of the query is constructed using that builder |
| before the query function returns. |
| |
| @node Symbol Handling |
| |
| @chapter Symbol Handling |
| |
| Symbols are a key part of @value{GDBN}'s operation. Symbols include variables, |
| functions, and types. |
| |
| @section Symbol Reading |
| |
| @cindex symbol reading |
| @cindex reading of symbols |
| @cindex symbol files |
| @value{GDBN} reads symbols from @dfn{symbol files}. The usual symbol |
| file is the file containing the program which @value{GDBN} is |
| debugging. @value{GDBN} can be directed to use a different file for |
| symbols (with the @samp{symbol-file} command), and it can also read |
| more symbols via the @samp{add-file} and @samp{load} commands, or while |
| reading symbols from shared libraries. |
| |
| @findex find_sym_fns |
| Symbol files are initially opened by code in @file{symfile.c} using |
| the BFD library (@pxref{Support Libraries}). BFD identifies the type |
| of the file by examining its header. @code{find_sym_fns} then uses |
| this identification to locate a set of symbol-reading functions. |
| |
| @findex add_symtab_fns |
| @cindex @code{sym_fns} structure |
| @cindex adding a symbol-reading module |
| Symbol-reading modules identify themselves to @value{GDBN} by calling |
| @code{add_symtab_fns} during their module initialization. The argument |
| to @code{add_symtab_fns} is a @code{struct sym_fns} which contains the |
| name (or name prefix) of the symbol format, the length of the prefix, |
| and pointers to four functions. These functions are called at various |
| times to process symbol files whose identification matches the specified |
| prefix. |
| |
| The functions supplied by each module are: |
| |
| @table @code |
| @item @var{xyz}_symfile_init(struct sym_fns *sf) |
| |
| @cindex secondary symbol file |
| Called from @code{symbol_file_add} when we are about to read a new |
| symbol file. This function should clean up any internal state (possibly |
| resulting from half-read previous files, for example) and prepare to |
| read a new symbol file. Note that the symbol file which we are reading |
| might be a new ``main'' symbol file, or might be a secondary symbol file |
| whose symbols are being added to the existing symbol table. |
| |
| The argument to @code{@var{xyz}_symfile_init} is a newly allocated |
| @code{struct sym_fns} whose @code{bfd} field contains the BFD for the |
| new symbol file being read. Its @code{private} field has been zeroed, |
| and can be modified as desired. Typically, a struct of private |
| information will be @code{malloc}'d, and a pointer to it will be placed |
| in the @code{private} field. |
| |
| There is no result from @code{@var{xyz}_symfile_init}, but it can call |
| @code{error} if it detects an unavoidable problem. |
| |
| @item @var{xyz}_new_init() |
| |
| Called from @code{symbol_file_add} when discarding existing symbols. |
| This function needs only handle the symbol-reading module's internal |
| state; the symbol table data structures visible to the rest of |
| @value{GDBN} will be discarded by @code{symbol_file_add}. It has no |
| arguments and no result. It may be called after |
| @code{@var{xyz}_symfile_init}, if a new symbol table is being read, or |
| may be called alone if all symbols are simply being discarded. |
| |
| @item @var{xyz}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline) |
| |
| Called from @code{symbol_file_add} to actually read the symbols from a |
| symbol-file into a set of psymtabs or symtabs. |
| |
| @code{sf} points to the @code{struct sym_fns} originally passed to |
| @code{@var{xyz}_sym_init} for possible initialization. @code{addr} is |
| the offset between the file's specified start address and its true |
| address in memory. @code{mainline} is 1 if this is the main symbol |
| table being read, and 0 if a secondary symbol file (e.g. shared library |
| or dynamically loaded file) is being read.@refill |
| @end table |
| |
| In addition, if a symbol-reading module creates psymtabs when |
| @var{xyz}_symfile_read is called, these psymtabs will contain a pointer |
| to a function @code{@var{xyz}_psymtab_to_symtab}, which can be called |
| from any point in the @value{GDBN} symbol-handling code. |
| |
| @table @code |
| @item @var{xyz}_psymtab_to_symtab (struct partial_symtab *pst) |
| |
| Called from @code{psymtab_to_symtab} (or the @code{PSYMTAB_TO_SYMTAB} macro) if |
| the psymtab has not already been read in and had its @code{pst->symtab} |
| pointer set. The argument is the psymtab to be fleshed-out into a |
| symtab. Upon return, @code{pst->readin} should have been set to 1, and |
| @code{pst->symtab} should contain a pointer to the new corresponding symtab, or |
| zero if there were no symbols in that part of the symbol file. |
| @end table |
| |
| @section Partial Symbol Tables |
| |
| @value{GDBN} has three types of symbol tables: |
| |
| @itemize @bullet |
| @cindex full symbol table |
| @cindex symtabs |
| @item |
| Full symbol tables (@dfn{symtabs}). These contain the main |
| information about symbols and addresses. |
| |
| @cindex psymtabs |
| @item |
| Partial symbol tables (@dfn{psymtabs}). These contain enough |
| information to know when to read the corresponding part of the full |
| symbol table. |
| |
| @cindex minimal symbol table |
| @cindex minsymtabs |
| @item |
| Minimal symbol tables (@dfn{msymtabs}). These contain information |
| gleaned from non-debugging symbols. |
| @end itemize |
| |
| @cindex partial symbol table |
| This section describes partial symbol tables. |
| |
| A psymtab is constructed by doing a very quick pass over an executable |
| file's debugging information. Small amounts of information are |
| extracted---enough to identify which parts of the symbol table will |
| need to be re-read and fully digested later, when the user needs the |
| information. The speed of this pass causes @value{GDBN} to start up very |
| quickly. Later, as the detailed rereading occurs, it occurs in small |
| pieces, at various times, and the delay therefrom is mostly invisible to |
| the user. |
| @c (@xref{Symbol Reading}.) |
| |
| The symbols that show up in a file's psymtab should be, roughly, those |
| visible to the debugger's user when the program is not running code from |
| that file. These include external symbols and types, static symbols and |
| types, and @code{enum} values declared at file scope. |
| |
| The psymtab also contains the range of instruction addresses that the |
| full symbol table would represent. |
| |
| @cindex finding a symbol |
| @cindex symbol lookup |
| The idea is that there are only two ways for the user (or much of the |
| code in the debugger) to reference a symbol: |
| |
| @itemize @bullet |
| @findex find_pc_function |
| @findex find_pc_line |
| @item |
| By its address (e.g. execution stops at some address which is inside a |
| function in this file). The address will be noticed to be in the |
| range of this psymtab, and the full symtab will be read in. |
| @code{find_pc_function}, @code{find_pc_line}, and other |
| @code{find_pc_@dots{}} functions handle this. |
| |
| @cindex lookup_symbol |
| @item |
| By its name |
| (e.g. the user asks to print a variable, or set a breakpoint on a |
| function). Global names and file-scope names will be found in the |
| psymtab, which will cause the symtab to be pulled in. Local names will |
| have to be qualified by a global name, or a file-scope name, in which |
| case we will have already read in the symtab as we evaluated the |
| qualifier. Or, a local symbol can be referenced when we are ``in'' a |
| local scope, in which case the first case applies. @code{lookup_symbol} |
| does most of the work here. |
| @end itemize |
| |
| The only reason that psymtabs exist is to cause a symtab to be read in |
| at the right moment. Any symbol that can be elided from a psymtab, |
| while still causing that to happen, should not appear in it. Since |
| psymtabs don't have the idea of scope, you can't put local symbols in |
| them anyway. Psymtabs don't have the idea of the type of a symbol, |
| either, so types need not appear, unless they will be referenced by |
| name. |
| |
| It is a bug for @value{GDBN} to behave one way when only a psymtab has |
| been read, and another way if the corresponding symtab has been read |
| in. Such bugs are typically caused by a psymtab that does not contain |
| all the visible symbols, or which has the wrong instruction address |
| ranges. |
| |
| The psymtab for a particular section of a symbol file (objfile) could be |
| thrown away after the symtab has been read in. The symtab should always |
| be searched before the psymtab, so the psymtab will never be used (in a |
| bug-free environment). Currently, psymtabs are allocated on an obstack, |
| and all the psymbols themselves are allocated in a pair of large arrays |
| on an obstack, so there is little to be gained by trying to free them |
| unless you want to do a lot more work. |
| |
| @section Types |
| |
| @unnumberedsubsec Fundamental Types (e.g., @code{FT_VOID}, @code{FT_BOOLEAN}). |
| |
| @cindex fundamental types |
| These are the fundamental types that @value{GDBN} uses internally. Fundamental |
| types from the various debugging formats (stabs, ELF, etc) are mapped |
| into one of these. They are basically a union of all fundamental types |
| that @value{GDBN} knows about for all the languages that @value{GDBN} |
| knows about. |
| |
| @unnumberedsubsec Type Codes (e.g., @code{TYPE_CODE_PTR}, @code{TYPE_CODE_ARRAY}). |
| |
| @cindex type codes |
| Each time @value{GDBN} builds an internal type, it marks it with one |
| of these types. The type may be a fundamental type, such as |
| @code{TYPE_CODE_INT}, or a derived type, such as @code{TYPE_CODE_PTR} |
| which is a pointer to another type. Typically, several @code{FT_*} |
| types map to one @code{TYPE_CODE_*} type, and are distinguished by |
| other members of the type struct, such as whether the type is signed |
| or unsigned, and how many bits it uses. |
| |
| @unnumberedsubsec Builtin Types (e.g., @code{builtin_type_void}, @code{builtin_type_char}). |
| |
| These are instances of type structs that roughly correspond to |
| fundamental types and are created as global types for @value{GDBN} to |
| use for various ugly historical reasons. We eventually want to |
| eliminate these. Note for example that @code{builtin_type_int} |
| initialized in @file{gdbtypes.c} is basically the same as a |
| @code{TYPE_CODE_INT} type that is initialized in @file{c-lang.c} for |
| an @code{FT_INTEGER} fundamental type. The difference is that the |
| @code{builtin_type} is not associated with any particular objfile, and |
| only one instance exists, while @file{c-lang.c} builds as many |
| @code{TYPE_CODE_INT} types as needed, with each one associated with |
| some particular objfile. |
| |
| @section Object File Formats |
| @cindex object file formats |
| |
| @subsection a.out |
| |
| @cindex @code{a.out} format |
| The @code{a.out} format is the original file format for Unix. It |
| consists of three sections: @code{text}, @code{data}, and @code{bss}, |
| which are for program code, initialized data, and uninitialized data, |
| respectively. |
| |
| The @code{a.out} format is so simple that it doesn't have any reserved |
| place for debugging information. (Hey, the original Unix hackers used |
| @samp{adb}, which is a machine-language debugger!) The only debugging |
| format for @code{a.out} is stabs, which is encoded as a set of normal |
| symbols with distinctive attributes. |
| |
| The basic @code{a.out} reader is in @file{dbxread.c}. |
| |
| @subsection COFF |
| |
| @cindex COFF format |
| The COFF format was introduced with System V Release 3 (SVR3) Unix. |
| COFF files may have multiple sections, each prefixed by a header. The |
| number of sections is limited. |
| |
| The COFF specification includes support for debugging. Although this |
| was a step forward, the debugging information was woefully limited. For |
| instance, it was not possible to represent code that came from an |
| included file. |
| |
| The COFF reader is in @file{coffread.c}. |
| |
| @subsection ECOFF |
| |
| @cindex ECOFF format |
| ECOFF is an extended COFF originally introduced for Mips and Alpha |
| workstations. |
| |
| The basic ECOFF reader is in @file{mipsread.c}. |
| |
| @subsection XCOFF |
| |
| @cindex XCOFF format |
| The IBM RS/6000 running AIX uses an object file format called XCOFF. |
| The COFF sections, symbols, and line numbers are used, but debugging |
| symbols are @code{dbx}-style stabs whose strings are located in the |
| @code{.debug} section (rather than the string table). For more |
| information, see @ref{Top,,,stabs,The Stabs Debugging Format}. |
| |
| The shared library scheme has a clean interface for figuring out what |
| shared libraries are in use, but the catch is that everything which |
| refers to addresses (symbol tables and breakpoints at least) needs to be |
| relocated for both shared libraries and the main executable. At least |
| using the standard mechanism this can only be done once the program has |
| been run (or the core file has been read). |
| |
| @subsection PE |
| |
| @cindex PE-COFF format |
| Windows 95 and NT use the PE (@dfn{Portable Executable}) format for their |
| executables. PE is basically COFF with additional headers. |
| |
| While BFD includes special PE support, @value{GDBN} needs only the basic |
| COFF reader. |
| |
| @subsection ELF |
| |
| @cindex ELF format |
| The ELF format came with System V Release 4 (SVR4) Unix. ELF is similar |
| to COFF in being organized into a number of sections, but it removes |
| many of COFF's limitations. |
| |
| The basic ELF reader is in @file{elfread.c}. |
| |
| @subsection SOM |
| |
| @cindex SOM format |
| SOM is HP's object file and debug format (not to be confused with IBM's |
| SOM, which is a cross-language ABI). |
| |
| The SOM reader is in @file{hpread.c}. |
| |
| @subsection Other File Formats |
| |
| @cindex Netware Loadable Module format |
| Other file formats that have been supported by @value{GDBN} include Netware |
| Loadable Modules (@file{nlmread.c}). |
| |
| @section Debugging File Formats |
| |
| This section describes characteristics of debugging information that |
| are independent of the object file format. |
| |
| @subsection stabs |
| |
| @cindex stabs debugging info |
| @code{stabs} started out as special symbols within the @code{a.out} |
| format. Since then, it has been encapsulated into other file |
| formats, such as COFF and ELF. |
| |
| While @file{dbxread.c} does some of the basic stab processing, |
| including for encapsulated versions, @file{stabsread.c} does |
| the real work. |
| |
| @subsection COFF |
| |
| @cindex COFF debugging info |
| The basic COFF definition includes debugging information. The level |
| of support is minimal and non-extensible, and is not often used. |
| |
| @subsection Mips debug (Third Eye) |
| |
| @cindex ECOFF debugging info |
| ECOFF includes a definition of a special debug format. |
| |
| The file @file{mdebugread.c} implements reading for this format. |
| |
| @subsection DWARF 1 |
| |
| @cindex DWARF 1 debugging info |
| DWARF 1 is a debugging format that was originally designed to be |
| used with ELF in SVR4 systems. |
| |
| @c GCC_PRODUCER |
| @c GPLUS_PRODUCER |
| @c LCC_PRODUCER |
| @c If defined, these are the producer strings in a DWARF 1 file. All of |
| @c these have reasonable defaults already. |
| |
| The DWARF 1 reader is in @file{dwarfread.c}. |
| |
| @subsection DWARF 2 |
| |
| @cindex DWARF 2 debugging info |
| DWARF 2 is an improved but incompatible version of DWARF 1. |
| |
| The DWARF 2 reader is in @file{dwarf2read.c}. |
| |
| @subsection SOM |
| |
| @cindex SOM debugging info |
| Like COFF, the SOM definition includes debugging information. |
| |
| @section Adding a New Symbol Reader to @value{GDBN} |
| |
| @cindex adding debugging info reader |
| If you are using an existing object file format (@code{a.out}, COFF, ELF, etc), |
| there is probably little to be done. |
| |
| If you need to add a new object file format, you must first add it to |
| BFD. This is beyond the scope of this document. |
| |
| You must then arrange for the BFD code to provide access to the |
| debugging symbols. Generally @value{GDBN} will have to call swapping routines |
| from BFD and a few other BFD internal routines to locate the debugging |
| information. As much as possible, @value{GDBN} should not depend on the BFD |
| internal data structures. |
| |
| For some targets (e.g., COFF), there is a special transfer vector used |
| to call swapping routines, since the external data structures on various |
| platforms have different sizes and layouts. Specialized routines that |
| will only ever be implemented by one object file format may be called |
| directly. This interface should be described in a file |
| @file{bfd/lib@var{xyz}.h}, which is included by @value{GDBN}. |
| |
| |
| @node Language Support |
| |
| @chapter Language Support |
| |
| @cindex language support |
| @value{GDBN}'s language support is mainly driven by the symbol reader, |
| although it is possible for the user to set the source language |
| manually. |
| |
| @value{GDBN} chooses the source language by looking at the extension |
| of the file recorded in the debug info; @file{.c} means C, @file{.f} |
| means Fortran, etc. It may also use a special-purpose language |
| identifier if the debug format supports it, like with DWARF. |
| |
| @section Adding a Source Language to @value{GDBN} |
| |
| @cindex adding source language |
| To add other languages to @value{GDBN}'s expression parser, follow the |
| following steps: |
| |
| @table @emph |
| @item Create the expression parser. |
| |
| @cindex expression parser |
| This should reside in a file @file{@var{lang}-exp.y}. Routines for |
| building parsed expressions into a @code{union exp_element} list are in |
| @file{parse.c}. |
| |
| @cindex language parser |
| Since we can't depend upon everyone having Bison, and YACC produces |
| parsers that define a bunch of global names, the following lines |
| @strong{must} be included at the top of the YACC parser, to prevent the |
| various parsers from defining the same global names: |
| |
| @smallexample |
| #define yyparse @var{lang}_parse |
| #define yylex @var{lang}_lex |
| #define yyerror @var{lang}_error |
| #define yylval @var{lang}_lval |
| #define yychar @var{lang}_char |
| #define yydebug @var{lang}_debug |
| #define yypact @var{lang}_pact |
| #define yyr1 @var{lang}_r1 |
| #define yyr2 @var{lang}_r2 |
| #define yydef @var{lang}_def |
| #define yychk @var{lang}_chk |
| #define yypgo @var{lang}_pgo |
| #define yyact @var{lang}_act |
| #define yyexca @var{lang}_exca |
| #define yyerrflag @var{lang}_errflag |
| #define yynerrs @var{lang}_nerrs |
| @end smallexample |
| |
| At the bottom of your parser, define a @code{struct language_defn} and |
| initialize it with the right values for your language. Define an |
| @code{initialize_@var{lang}} routine and have it call |
| @samp{add_language(@var{lang}_language_defn)} to tell the rest of @value{GDBN} |
| that your language exists. You'll need some other supporting variables |
| and functions, which will be used via pointers from your |
| @code{@var{lang}_language_defn}. See the declaration of @code{struct |
| language_defn} in @file{language.h}, and the other @file{*-exp.y} files, |
| for more information. |
| |
| @item Add any evaluation routines, if necessary |
| |
| @cindex expression evaluation routines |
| @findex evaluate_subexp |
| @findex prefixify_subexp |
| @findex length_of_subexp |
| If you need new opcodes (that represent the operations of the language), |
| add them to the enumerated type in @file{expression.h}. Add support |
| code for these operations in the @code{evaluate_subexp} function |
| defined in the file @file{eval.c}. Add cases |
| for new opcodes in two functions from @file{parse.c}: |
| @code{prefixify_subexp} and @code{length_of_subexp}. These compute |
| the number of @code{exp_element}s that a given operation takes up. |
| |
| @item Update some existing code |
| |
| Add an enumerated identifier for your language to the enumerated type |
| @code{enum language} in @file{defs.h}. |
| |
| Update the routines in @file{language.c} so your language is included. |
| These routines include type predicates and such, which (in some cases) |
| are language dependent. If your language does not appear in the switch |
| statement, an error is reported. |
| |
| @vindex current_language |
| Also included in @file{language.c} is the code that updates the variable |
| @code{current_language}, and the routines that translate the |
| @code{language_@var{lang}} enumerated identifier into a printable |
| string. |
| |
| @findex _initialize_language |
| Update the function @code{_initialize_language} to include your |
| language. This function picks the default language upon startup, so is |
| dependent upon which languages that @value{GDBN} is built for. |
| |
| @findex allocate_symtab |
| Update @code{allocate_symtab} in @file{symfile.c} and/or symbol-reading |
| code so that the language of each symtab (source file) is set properly. |
| This is used to determine the language to use at each stack frame level. |
| Currently, the language is set based upon the extension of the source |
| file. If the language can be better inferred from the symbol |
| information, please set the language of the symtab in the symbol-reading |
| code. |
| |
| @findex print_subexp |
| @findex op_print_tab |
| Add helper code to @code{print_subexp} (in @file{expprint.c}) to handle any new |
| expression opcodes you have added to @file{expression.h}. Also, add the |
| printed representations of your operators to @code{op_print_tab}. |
| |
| @item Add a place of call |
| |
| @findex parse_exp_1 |
| Add a call to @code{@var{lang}_parse()} and @code{@var{lang}_error} in |
| @code{parse_exp_1} (defined in @file{parse.c}). |
| |
| @item Use macros to trim code |
| |
| @cindex trimming language-dependent code |
| The user has the option of building @value{GDBN} for some or all of the |
| languages. If the user decides to build @value{GDBN} for the language |
| @var{lang}, then every file dependent on @file{language.h} will have the |
| macro @code{_LANG_@var{lang}} defined in it. Use @code{#ifdef}s to |
| leave out large routines that the user won't need if he or she is not |
| using your language. |
| |
| Note that you do not need to do this in your YACC parser, since if @value{GDBN} |
| is not build for @var{lang}, then @file{@var{lang}-exp.tab.o} (the |
| compiled form of your parser) is not linked into @value{GDBN} at all. |
| |
| See the file @file{configure.in} for how @value{GDBN} is configured |
| for different languages. |
| |
| @item Edit @file{Makefile.in} |
| |
| Add dependencies in @file{Makefile.in}. Make sure you update the macro |
| variables such as @code{HFILES} and @code{OBJS}, otherwise your code may |
| not get linked in, or, worse yet, it may not get @code{tar}red into the |
| distribution! |
| @end table |
| |
| |
| @node Host Definition |
| |
| @chapter Host Definition |
| |
| With the advent of Autoconf, it's rarely necessary to have host |
| definition machinery anymore. The following information is provided, |
| mainly, as an historical reference. |
| |
| @section Adding a New Host |
| |
| @cindex adding a new host |
| @cindex host, adding |
| @value{GDBN}'s host configuration support normally happens via Autoconf. |
| New host-specific definitions should not be needed. Older hosts |
| @value{GDBN} still use the host-specific definitions and files listed |
| below, but these mostly exist for historical reasons, and will |
| eventually disappear. |
| |
| @table @file |
| @item gdb/config/@var{arch}/@var{xyz}.mh |
| This file once contained both host and native configuration information |
| (@pxref{Native Debugging}) for the machine @var{xyz}. The host |
| configuration information is now handed by Autoconf. |
| |
| Host configuration information included a definition of |
| @code{XM_FILE=xm-@var{xyz}.h} and possibly definitions for @code{CC}, |
| @code{SYSV_DEFINE}, @code{XM_CFLAGS}, @code{XM_ADD_FILES}, |
| @code{XM_CLIBS}, @code{XM_CDEPS}, etc.; see @file{Makefile.in}. |
| |
| New host only configurations do not need this file. |
| |
| @item gdb/config/@var{arch}/xm-@var{xyz}.h |
| This file once contained definitions and includes required when hosting |
| gdb on machine @var{xyz}. Those definitions and includes are now |
| handled by Autoconf. |
| |
| New host and native configurations do not need this file. |
| |
| @emph{Maintainer's note: Some hosts continue to use the @file{xm-xyz.h} |
| file to define the macros @var{HOST_FLOAT_FORMAT}, |
| @var{HOST_DOUBLE_FORMAT} and @var{HOST_LONG_DOUBLE_FORMAT}. That code |
| also needs to be replaced with either an Autoconf or run-time test.} |
| |
| @end table |
| |
| @subheading Generic Host Support Files |
| |
| @cindex generic host support |
| There are some ``generic'' versions of routines that can be used by |
| various systems. These can be customized in various ways by macros |
| defined in your @file{xm-@var{xyz}.h} file. If these routines work for |
| the @var{xyz} host, you can just include the generic file's name (with |
| @samp{.o}, not @samp{.c}) in @code{XDEPFILES}. |
| |
| Otherwise, if your machine needs custom support routines, you will need |
| to write routines that perform the same functions as the generic file. |
| Put them into @code{@var{xyz}-xdep.c}, and put @code{@var{xyz}-xdep.o} |
| into @code{XDEPFILES}. |
| |
| @table @file |
| @cindex remote debugging support |
| @cindex serial line support |
| @item ser-unix.c |
| This contains serial line support for Unix systems. This is always |
| included, via the makefile variable @code{SER_HARDWIRE}; override this |
| variable in the @file{.mh} file to avoid it. |
| |
| @item ser-go32.c |
| This contains serial line support for 32-bit programs running under DOS, |
| using the DJGPP (a.k.a.@: GO32) execution environment. |
| |
| @cindex TCP remote support |
| @item ser-tcp.c |
| This contains generic TCP support using sockets. |
| @end table |
| |
| @section Host Conditionals |
| |
| When @value{GDBN} is configured and compiled, various macros are |
| defined or left undefined, to control compilation based on the |
| attributes of the host system. These macros and their meanings (or if |
| the meaning is not documented here, then one of the source files where |
| they are used is indicated) are: |
| |
| @ftable @code |
| @item @value{GDBN}INIT_FILENAME |
| The default name of @value{GDBN}'s initialization file (normally |
| @file{.gdbinit}). |
| |
| @item NO_STD_REGS |
| This macro is deprecated. |
| |
| @item NO_SYS_FILE |
| Define this if your system does not have a @code{<sys/file.h>}. |
| |
| @item SIGWINCH_HANDLER |
| If your host defines @code{SIGWINCH}, you can define this to be the name |
| of a function to be called if @code{SIGWINCH} is received. |
| |
| @item SIGWINCH_HANDLER_BODY |
| Define this to expand into code that will define the function named by |
| the expansion of @code{SIGWINCH_HANDLER}. |
| |
| @item ALIGN_STACK_ON_STARTUP |
| @cindex stack alignment |
| Define this if your system is of a sort that will crash in |
| @code{tgetent} if the stack happens not to be longword-aligned when |
| @code{main} is called. This is a rare situation, but is known to occur |
| on several different types of systems. |
| |
| @item CRLF_SOURCE_FILES |
| @cindex DOS text files |
| Define this if host files use @code{\r\n} rather than @code{\n} as a |
| line terminator. This will cause source file listings to omit @code{\r} |
| characters when printing and it will allow @code{\r\n} line endings of files |
| which are ``sourced'' by gdb. It must be possible to open files in binary |
| mode using @code{O_BINARY} or, for fopen, @code{"rb"}. |
| |
| @item DEFAULT_PROMPT |
| @cindex prompt |
| The default value of the prompt string (normally @code{"(gdb) "}). |
| |
| @item DEV_TTY |
| @cindex terminal device |
| The name of the generic TTY device, defaults to @code{"/dev/tty"}. |
| |
| @item FCLOSE_PROVIDED |
| Define this if the system declares @code{fclose} in the headers included |
| in @code{defs.h}. This isn't needed unless your compiler is unusually |
| anal. |
| |
| @item FOPEN_RB |
| Define this if binary files are opened the same way as text files. |
| |
| @item GETENV_PROVIDED |
| Define this if the system declares @code{getenv} in its headers included |
| in @code{defs.h}. This isn't needed unless your compiler is unusually |
| anal. |
| |
| @item HAVE_MMAP |
| @findex mmap |
| In some cases, use the system call @code{mmap} for reading symbol |
| tables. For some machines this allows for sharing and quick updates. |
| |
| @item HAVE_TERMIO |
| Define this if the host system has @code{termio.h}. |
| |
| @item INT_MAX |
| @itemx INT_MIN |
| @itemx LONG_MAX |
| @itemx UINT_MAX |
| @itemx ULONG_MAX |
| Values for host-side constants. |
| |
| @item ISATTY |
| Substitute for isatty, if not available. |
| |
| @item LONGEST |
| This is the longest integer type available on the host. If not defined, |
| it will default to @code{long long} or @code{long}, depending on |
| @code{CC_HAS_LONG_LONG}. |
| |
| @item CC_HAS_LONG_LONG |
| @cindex @code{long long} data type |
| Define this if the host C compiler supports @code{long long}. This is set |
| by the @code{configure} script. |
| |
| @item PRINTF_HAS_LONG_LONG |
| Define this if the host can handle printing of long long integers via |
| the printf format conversion specifier @code{ll}. This is set by the |
| @code{configure} script. |
| |
| @item HAVE_LONG_DOUBLE |
| Define this if the host C compiler supports @code{long double}. This is |
| set by the @code{configure} script. |
| |
| @item PRINTF_HAS_LONG_DOUBLE |
| Define this if the host can handle printing of long double float-point |
| numbers via the printf format conversion specifier @code{Lg}. This is |
| set by the @code{configure} script. |
| |
| @item SCANF_HAS_LONG_DOUBLE |
| Define this if the host can handle the parsing of long double |
| float-point numbers via the scanf format conversion specifier |
| @code{Lg}. This is set by the @code{configure} script. |
| |
| @item LSEEK_NOT_LINEAR |
| Define this if @code{lseek (n)} does not necessarily move to byte number |
| @code{n} in the file. This is only used when reading source files. It |
| is normally faster to define @code{CRLF_SOURCE_FILES} when possible. |
| |
| @item L_SET |
| This macro is used as the argument to @code{lseek} (or, most commonly, |
| @code{bfd_seek}). FIXME, should be replaced by SEEK_SET instead, |
| which is the POSIX equivalent. |
| |
| @item MMAP_BASE_ADDRESS |
| When using HAVE_MMAP, the first mapping should go at this address. |
| |
| @item MMAP_INCREMENT |
| when using HAVE_MMAP, this is the increment between mappings. |
| |
| @item NORETURN |
| If defined, this should be one or more tokens, such as @code{volatile}, |
| that can be used in both the declaration and definition of functions to |
| indicate that they never return. The default is already set correctly |
| if compiling with GCC. This will almost never need to be defined. |
| |
| @item ATTR_NORETURN |
| If defined, this should be one or more tokens, such as |
| @code{__attribute__ ((noreturn))}, that can be used in the declarations |
| of functions to indicate that they never return. The default is already |
| set correctly if compiling with GCC. This will almost never need to be |
| defined. |
| |
| @item USE_MMALLOC |
| @findex mmalloc |
| @value{GDBN} will use the @code{mmalloc} library for memory allocation |
| for symbol reading if this symbol is defined. Be careful defining it |
| since there are systems on which @code{mmalloc} does not work for some |
| reason. One example is the DECstation, where its RPC library can't |
| cope with our redefinition of @code{malloc} to call @code{mmalloc}. |
| When defining @code{USE_MMALLOC}, you will also have to set |
| @code{MMALLOC} in the Makefile, to point to the @code{mmalloc} library. This |
| define is set when you configure with @samp{--with-mmalloc}. |
| |
| @item NO_MMCHECK |
| @findex mmcheck |
| Define this if you are using @code{mmalloc}, but don't want the overhead |
| of checking the heap with @code{mmcheck}. Note that on some systems, |
| the C runtime makes calls to @code{malloc} prior to calling @code{main}, and if |
| @code{free} is ever called with these pointers after calling |
| @code{mmcheck} to enable checking, a memory corruption abort is certain |
| to occur. These systems can still use @code{mmalloc}, but must define |
| @code{NO_MMCHECK}. |
| |
| @item MMCHECK_FORCE |
| Define this to 1 if the C runtime allocates memory prior to |
| @code{mmcheck} being called, but that memory is never freed so we don't |
| have to worry about it triggering a memory corruption abort. The |
| default is 0, which means that @code{mmcheck} will only install the heap |
| checking functions if there has not yet been any memory allocation |
| calls, and if it fails to install the functions, @value{GDBN} will issue a |
| warning. This is currently defined if you configure using |
| @samp{--with-mmalloc}. |
| |
| @item NO_SIGINTERRUPT |
| @findex siginterrupt |
| Define this to indicate that @code{siginterrupt} is not available. |
| |
| @item SEEK_CUR |
| @itemx SEEK_SET |
| Define these to appropriate value for the system @code{lseek}, if not already |
| defined. |
| |
| @item STOP_SIGNAL |
| This is the signal for stopping @value{GDBN}. Defaults to |
| @code{SIGTSTP}. (Only redefined for the Convex.) |
| |
| @item USE_O_NOCTTY |
| Define this if the interior's tty should be opened with the @code{O_NOCTTY} |
| flag. (FIXME: This should be a native-only flag, but @file{inflow.c} is |
| always linked in.) |
| |
| @item USG |
| Means that System V (prior to SVR4) include files are in use. (FIXME: |
| This symbol is abused in @file{infrun.c}, @file{regex.c}, and |
| @file{utils.c} for other things, at the moment.) |
| |
| @item lint |
| Define this to help placate @code{lint} in some situations. |
| |
| @item volatile |
| Define this to override the defaults of @code{__volatile__} or |
| @code{/**/}. |
| @end ftable |
| |
| |
| @node Target Architecture Definition |
| |
| @chapter Target Architecture Definition |
| |
| @cindex target architecture definition |
| @value{GDBN}'s target architecture defines what sort of |
| machine-language programs @value{GDBN} can work with, and how it works |
| with them. |
| |
| The target architecture object is implemented as the C structure |
| @code{struct gdbarch *}. The structure, and its methods, are generated |
| using the Bourne shell script @file{gdbarch.sh}. |
| |
| @section Operating System ABI Variant Handling |
| @cindex OS ABI variants |
| |
| @value{GDBN} provides a mechanism for handling variations in OS |
| ABIs. An OS ABI variant may have influence over any number of |
| variables in the target architecture definition. There are two major |
| components in the OS ABI mechanism: sniffers and handlers. |
| |
| A @dfn{sniffer} examines a file matching a BFD architecture/flavour pair |
| (the architecture may be wildcarded) in an attempt to determine the |
| OS ABI of that file. Sniffers with a wildcarded architecture are considered |
| to be @dfn{generic}, while sniffers for a specific architecture are |
| considered to be @dfn{specific}. A match from a specific sniffer |
| overrides a match from a generic sniffer. Multiple sniffers for an |
| architecture/flavour may exist, in order to differentiate between two |
| different operating systems which use the same basic file format. The |
| OS ABI framework provides a generic sniffer for ELF-format files which |
| examines the @code{EI_OSABI} field of the ELF header, as well as note |
| sections known to be used by several operating systems. |
| |
| @cindex fine-tuning @code{gdbarch} structure |
| A @dfn{handler} is used to fine-tune the @code{gdbarch} structure for the |
| selected OS ABI. There may be only one handler for a given OS ABI |
| for each BFD architecture. |
| |
| The following OS ABI variants are defined in @file{osabi.h}: |
| |
| @table @code |
| |
| @findex GDB_OSABI_UNKNOWN |
| @item GDB_OSABI_UNKNOWN |
| The ABI of the inferior is unknown. The default @code{gdbarch} |
| settings for the architecture will be used. |
| |
| @findex GDB_OSABI_SVR4 |
| @item GDB_OSABI_SVR4 |
| UNIX System V Release 4 |
| |
| @findex GDB_OSABI_HURD |
| @item GDB_OSABI_HURD |
| GNU using the Hurd kernel |
| |
| @findex GDB_OSABI_SOLARIS |
| @item GDB_OSABI_SOLARIS |
| Sun Solaris |
| |
| @findex GDB_OSABI_OSF1 |
| @item GDB_OSABI_OSF1 |
| OSF/1, including Digital UNIX and Compaq Tru64 UNIX |
| |
| @findex GDB_OSABI_LINUX |
| @item GDB_OSABI_LINUX |
| GNU using the Linux kernel |
| |
| @findex GDB_OSABI_FREEBSD_AOUT |
| @item GDB_OSABI_FREEBSD_AOUT |
| FreeBSD using the a.out executable format |
| |
| @findex GDB_OSABI_FREEBSD_ELF |
| @item GDB_OSABI_FREEBSD_ELF |
| FreeBSD using the ELF executable format |
| |
| @findex GDB_OSABI_NETBSD_AOUT |
| @item GDB_OSABI_NETBSD_AOUT |
| NetBSD using the a.out executable format |
| |
| @findex GDB_OSABI_NETBSD_ELF |
| @item GDB_OSABI_NETBSD_ELF |
| NetBSD using the ELF executable format |
| |
| @findex GDB_OSABI_WINCE |
| @item GDB_OSABI_WINCE |
| Windows CE |
| |
| @findex GDB_OSABI_GO32 |
| @item GDB_OSABI_GO32 |
| DJGPP |
| |
| @findex GDB_OSABI_NETWARE |
| @item GDB_OSABI_NETWARE |
| Novell NetWare |
| |
| @findex GDB_OSABI_ARM_EABI_V1 |
| @item GDB_OSABI_ARM_EABI_V1 |
| ARM Embedded ABI version 1 |
| |
| @findex GDB_OSABI_ARM_EABI_V2 |
| @item GDB_OSABI_ARM_EABI_V2 |
| ARM Embedded ABI version 2 |
| |
| @findex GDB_OSABI_ARM_APCS |
| @item GDB_OSABI_ARM_APCS |
| Generic ARM Procedure Call Standard |
| |
| @end table |
| |
| Here are the functions that make up the OS ABI framework: |
| |
| @deftypefun const char *gdbarch_osabi_name (enum gdb_osabi @var{osabi}) |
| Return the name of the OS ABI corresponding to @var{osabi}. |
| @end deftypefun |
| |
| @deftypefun void gdbarch_register_osabi (enum bfd_architecture @var{arch}, unsigned long @var{machine}, enum gdb_osabi @var{osabi}, void (*@var{init_osabi})(struct gdbarch_info @var{info}, struct gdbarch *@var{gdbarch})) |
| Register the OS ABI handler specified by @var{init_osabi} for the |
| architecture, machine type and OS ABI specified by @var{arch}, |
| @var{machine} and @var{osabi}. In most cases, a value of zero for the |
| machine type, which implies the architecture's default machine type, |
| will suffice. |
| @end deftypefun |
| |
| @deftypefun void gdbarch_register_osabi_sniffer (enum bfd_architecture @var{arch}, enum bfd_flavour @var{flavour}, enum gdb_osabi (*@var{sniffer})(bfd *@var{abfd})) |
| Register the OS ABI file sniffer specified by @var{sniffer} for the |
| BFD architecture/flavour pair specified by @var{arch} and @var{flavour}. |
| If @var{arch} is @code{bfd_arch_unknown}, the sniffer is considered to |
| be generic, and is allowed to examine @var{flavour}-flavoured files for |
| any architecture. |
| @end deftypefun |
| |
| @deftypefun enum gdb_osabi gdbarch_lookup_osabi (bfd *@var{abfd}) |
| Examine the file described by @var{abfd} to determine its OS ABI. |
| The value @code{GDB_OSABI_UNKNOWN} is returned if the OS ABI cannot |
| be determined. |
| @end deftypefun |
| |
| @deftypefun void gdbarch_init_osabi (struct gdbarch info @var{info}, struct gdbarch *@var{gdbarch}, enum gdb_osabi @var{osabi}) |
| Invoke the OS ABI handler corresponding to @var{osabi} to fine-tune the |
| @code{gdbarch} structure specified by @var{gdbarch}. If a handler |
| corresponding to @var{osabi} has not been registered for @var{gdbarch}'s |
| architecture, a warning will be issued and the debugging session will continue |
| with the defaults already established for @var{gdbarch}. |
| @end deftypefun |
| |
| @section Registers and Memory |
| |
| @value{GDBN}'s model of the target machine is rather simple. |
| @value{GDBN} assumes the machine includes a bank of registers and a |
| block of memory. Each register may have a different size. |
| |
| @value{GDBN} does not have a magical way to match up with the |
| compiler's idea of which registers are which; however, it is critical |
| that they do match up accurately. The only way to make this work is |
| to get accurate information about the order that the compiler uses, |
| and to reflect that in the @code{REGISTER_NAME} and related macros. |
| |
| @value{GDBN} can handle big-endian, little-endian, and bi-endian architectures. |
| |
| @section Pointers Are Not Always Addresses |
| @cindex pointer representation |
| @cindex address representation |
| @cindex word-addressed machines |
| @cindex separate data and code address spaces |
| @cindex spaces, separate data and code address |
| @cindex address spaces, separate data and code |
| @cindex code pointers, word-addressed |
| @cindex converting between pointers and addresses |
| @cindex D10V addresses |
| |
| On almost all 32-bit architectures, the representation of a pointer is |
| indistinguishable from the representation of some fixed-length number |
| whose value is the byte address of the object pointed to. On such |
| machines, the words ``pointer'' and ``address'' can be used interchangeably. |
| However, architectures with smaller word sizes are often cramped for |
| address space, so they may choose a pointer representation that breaks this |
| identity, and allows a larger code address space. |
| |
| For example, the Mitsubishi D10V is a 16-bit VLIW processor whose |
| instructions are 32 bits long@footnote{Some D10V instructions are |
| actually pairs of 16-bit sub-instructions. However, since you can't |
| jump into the middle of such a pair, code addresses can only refer to |
| full 32 bit instructions, which is what matters in this explanation.}. |
| If the D10V used ordinary byte addresses to refer to code locations, |
| then the processor would only be able to address 64kb of instructions. |
| However, since instructions must be aligned on four-byte boundaries, the |
| low two bits of any valid instruction's byte address are always |
| zero---byte addresses waste two bits. So instead of byte addresses, |
| the D10V uses word addresses---byte addresses shifted right two bits---to |
| refer to code. Thus, the D10V can use 16-bit words to address 256kb of |
| code space. |
| |
| However, this means that code pointers and data pointers have different |
| forms on the D10V. The 16-bit word @code{0xC020} refers to byte address |
| @code{0xC020} when used as a data address, but refers to byte address |
| @code{0x30080} when used as a code address. |
| |
| (The D10V also uses separate code and data address spaces, which also |
| affects the correspondence between pointers and addresses, but we're |
| going to ignore that here; this example is already too long.) |
| |
| To cope with architectures like this---the D10V is not the only |
| one!---@value{GDBN} tries to distinguish between @dfn{addresses}, which are |
| byte numbers, and @dfn{pointers}, which are the target's representation |
| of an address of a particular type of data. In the example above, |
| @code{0xC020} is the pointer, which refers to one of the addresses |
| @code{0xC020} or @code{0x30080}, depending on the type imposed upon it. |
| @value{GDBN} provides functions for turning a pointer into an address |
| and vice versa, in the appropriate way for the current architecture. |
| |
| Unfortunately, since addresses and pointers are identical on almost all |
| processors, this distinction tends to bit-rot pretty quickly. Thus, |
| each time you port @value{GDBN} to an architecture which does |
| distinguish between pointers and addresses, you'll probably need to |
| clean up some architecture-independent code. |
| |
| Here are functions which convert between pointers and addresses: |
| |
| @deftypefun CORE_ADDR extract_typed_address (void *@var{buf}, struct type *@var{type}) |
| Treat the bytes at @var{buf} as a pointer or reference of type |
| @var{type}, and return the address it represents, in a manner |
| appropriate for the current architecture. This yields an address |
| @value{GDBN} can use to read target memory, disassemble, etc. Note that |
| @var{buf} refers to a buffer in @value{GDBN}'s memory, not the |
| inferior's. |
| |
| For example, if the current architecture is the Intel x86, this function |
| extracts a little-endian integer of the appropriate length from |
| @var{buf} and returns it. However, if the current architecture is the |
| D10V, this function will return a 16-bit integer extracted from |
| @var{buf}, multiplied by four if @var{type} is a pointer to a function. |
| |
| If @var{type} is not a pointer or reference type, then this function |
| will signal an internal error. |
| @end deftypefun |
| |
| @deftypefun CORE_ADDR store_typed_address (void *@var{buf}, struct type *@var{type}, CORE_ADDR @var{addr}) |
| Store the address @var{addr} in @var{buf}, in the proper format for a |
| pointer of type @var{type} in the current architecture. Note that |
| @var{buf} refers to a buffer in @value{GDBN}'s memory, not the |
| inferior's. |
| |
| For example, if the current architecture is the Intel x86, this function |
| stores @var{addr} unmodified as a little-endian integer of the |
| appropriate length in @var{buf}. However, if the current architecture |
| is the D10V, this function divides @var{addr} by four if @var{type} is |
| a pointer to a function, and then stores it in @var{buf}. |
| |
| If @var{type} is not a pointer or reference type, then this function |
| will signal an internal error. |
| @end deftypefun |
| |
| @deftypefun CORE_ADDR value_as_address (struct value *@var{val}) |
| Assuming that @var{val} is a pointer, return the address it represents, |
| as appropriate for the current architecture. |
| |
| This function actually works on integral values, as well as pointers. |
| For pointers, it performs architecture-specific conversions as |
| described above for @code{extract_typed_address}. |
| @end deftypefun |
| |
| @deftypefun CORE_ADDR value_from_pointer (struct type *@var{type}, CORE_ADDR @var{addr}) |
| Create and return a value representing a pointer of type @var{type} to |
| the address @var{addr}, as appropriate for the current architecture. |
| This function performs architecture-specific conversions as described |
| above for @code{store_typed_address}. |
| @end deftypefun |
| |
| |
| @value{GDBN} also provides functions that do the same tasks, but assume |
| that pointers are simply byte addresses; they aren't sensitive to the |
| current architecture, beyond knowing the appropriate endianness. |
| |
| @deftypefun CORE_ADDR extract_address (void *@var{addr}, int len) |
| Extract a @var{len}-byte number from @var{addr} in the appropriate |
| endianness for the current architecture, and return it. Note that |
| @var{addr} refers to @value{GDBN}'s memory, not the inferior's. |
| |
| This function should only be used in architecture-specific code; it |
| doesn't have enough information to turn bits into a true address in the |
| appropriate way for the current architecture. If you can, use |
| @code{extract_typed_address} instead. |
| @end deftypefun |
| |
| @deftypefun void store_address (void *@var{addr}, int @var{len}, LONGEST @var{val}) |
| Store @var{val} at @var{addr} as a @var{len}-byte integer, in the |
| appropriate endianness for the current architecture. Note that |
| @var{addr} refers to a buffer in @value{GDBN}'s memory, not the |
| inferior's. |
| |
| This function should only be used in architecture-specific code; it |
| doesn't have enough information to turn a true address into bits in the |
| appropriate way for the current architecture. If you can, use |
| @code{store_typed_address} instead. |
| @end deftypefun |
| |
| |
| Here are some macros which architectures can define to indicate the |
| relationship between pointers and addresses. These have default |
| definitions, appropriate for architectures on which all pointers are |
| simple unsigned byte addresses. |
| |
| @deftypefn {Target Macro} CORE_ADDR POINTER_TO_ADDRESS (struct type *@var{type}, char *@var{buf}) |
| Assume that @var{buf} holds a pointer of type @var{type}, in the |
| appropriate format for the current architecture. Return the byte |
| address the pointer refers to. |
| |
| This function may safely assume that @var{type} is either a pointer or a |
| C@t{++} reference type. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} void ADDRESS_TO_POINTER (struct type *@var{type}, char *@var{buf}, CORE_ADDR @var{addr}) |
| Store in @var{buf} a pointer of type @var{type} representing the address |
| @var{addr}, in the appropriate format for the current architecture. |
| |
| This function may safely assume that @var{type} is either a pointer or a |
| C@t{++} reference type. |
| @end deftypefn |
| |
| @section Address Classes |
| @cindex address classes |
| @cindex DW_AT_byte_size |
| @cindex DW_AT_address_class |
| |
| Sometimes information about different kinds of addresses is available |
| via the debug information. For example, some programming environments |
| define addresses of several different sizes. If the debug information |
| distinguishes these kinds of address classes through either the size |
| info (e.g, @code{DW_AT_byte_size} in @w{DWARF 2}) or through an explicit |
| address class attribute (e.g, @code{DW_AT_address_class} in @w{DWARF 2}), the |
| following macros should be defined in order to disambiguate these |
| types within @value{GDBN} as well as provide the added information to |
| a @value{GDBN} user when printing type expressions. |
| |
| @deftypefn {Target Macro} int ADDRESS_CLASS_TYPE_FLAGS (int @var{byte_size}, int @var{dwarf2_addr_class}) |
| Returns the type flags needed to construct a pointer type whose size |
| is @var{byte_size} and whose address class is @var{dwarf2_addr_class}. |
| This function is normally called from within a symbol reader. See |
| @file{dwarf2read.c}. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} char *ADDRESS_CLASS_TYPE_FLAGS_TO_NAME (int @var{type_flags}) |
| Given the type flags representing an address class qualifier, return |
| its name. |
| @end deftypefn |
| @deftypefn {Target Macro} int ADDRESS_CLASS_NAME_to_TYPE_FLAGS (int @var{name}, int *var{type_flags_ptr}) |
| Given an address qualifier name, set the @code{int} refererenced by @var{type_flags_ptr} to the type flags |
| for that address class qualifier. |
| @end deftypefn |
| |
| Since the need for address classes is rather rare, none of |
| the address class macros defined by default. Predicate |
| macros are provided to detect when they are defined. |
| |
| Consider a hypothetical architecture in which addresses are normally |
| 32-bits wide, but 16-bit addresses are also supported. Furthermore, |
| suppose that the @w{DWARF 2} information for this architecture simply |
| uses a @code{DW_AT_byte_size} value of 2 to indicate the use of one |
| of these "short" pointers. The following functions could be defined |
| to implement the address class macros: |
| |
| @smallexample |
| somearch_address_class_type_flags (int byte_size, |
| int dwarf2_addr_class) |
| @{ |
| if (byte_size == 2) |
| return TYPE_FLAG_ADDRESS_CLASS_1; |
| else |
| return 0; |
| @} |
| |
| static char * |
| somearch_address_class_type_flags_to_name (int type_flags) |
| @{ |
| if (type_flags & TYPE_FLAG_ADDRESS_CLASS_1) |
| return "short"; |
| else |
| return NULL; |
| @} |
| |
| int |
| somearch_address_class_name_to_type_flags (char *name, |
| int *type_flags_ptr) |
| @{ |
| if (strcmp (name, "short") == 0) |
| @{ |
| *type_flags_ptr = TYPE_FLAG_ADDRESS_CLASS_1; |
| return 1; |
| @} |
| else |
| return 0; |
| @} |
| @end smallexample |
| |
| The qualifier @code{@@short} is used in @value{GDBN}'s type expressions |
| to indicate the presence of one of these "short" pointers. E.g, if |
| the debug information indicates that @code{short_ptr_var} is one of these |
| short pointers, @value{GDBN} might show the following behavior: |
| |
| @smallexample |
| (gdb) ptype short_ptr_var |
| type = int * @@short |
| @end smallexample |
| |
| |
| @section Raw and Virtual Register Representations |
| @cindex raw register representation |
| @cindex virtual register representation |
| @cindex representations, raw and virtual registers |
| |
| @emph{Maintainer note: This section is pretty much obsolete. The |
| functionality described here has largely been replaced by |
| pseudo-registers and the mechanisms described in @ref{Target |
| Architecture Definition, , Using Different Register and Memory Data |
| Representations}. See also @uref{http://www.gnu.org/software/gdb/bugs/, |
| Bug Tracking Database} and |
| @uref{http://sources.redhat.com/gdb/current/ari/, ARI Index} for more |
| up-to-date information.} |
| |
| Some architectures use one representation for a value when it lives in a |
| register, but use a different representation when it lives in memory. |
| In @value{GDBN}'s terminology, the @dfn{raw} representation is the one used in |
| the target registers, and the @dfn{virtual} representation is the one |
| used in memory, and within @value{GDBN} @code{struct value} objects. |
| |
| @emph{Maintainer note: Notice that the same mechanism is being used to |
| both convert a register to a @code{struct value} and alternative |
| register forms.} |
| |
| For almost all data types on almost all architectures, the virtual and |
| raw representations are identical, and no special handling is needed. |
| However, they do occasionally differ. For example: |
| |
| @itemize @bullet |
| @item |
| The x86 architecture supports an 80-bit @code{long double} type. However, when |
| we store those values in memory, they occupy twelve bytes: the |
| floating-point number occupies the first ten, and the final two bytes |
| are unused. This keeps the values aligned on four-byte boundaries, |
| allowing more efficient access. Thus, the x86 80-bit floating-point |
| type is the raw representation, and the twelve-byte loosely-packed |
| arrangement is the virtual representation. |
| |
| @item |
| Some 64-bit MIPS targets present 32-bit registers to @value{GDBN} as 64-bit |
| registers, with garbage in their upper bits. @value{GDBN} ignores the top 32 |
| bits. Thus, the 64-bit form, with garbage in the upper 32 bits, is the |
| raw representation, and the trimmed 32-bit representation is the |
| virtual representation. |
| @end itemize |
| |
| In general, the raw representation is determined by the architecture, or |
| @value{GDBN}'s interface to the architecture, while the virtual representation |
| can be chosen for @value{GDBN}'s convenience. @value{GDBN}'s register file, |
| @code{registers}, holds the register contents in raw format, and the |
| @value{GDBN} remote protocol transmits register values in raw format. |
| |
| Your architecture may define the following macros to request |
| conversions between the raw and virtual format: |
| |
| @deftypefn {Target Macro} int REGISTER_CONVERTIBLE (int @var{reg}) |
| Return non-zero if register number @var{reg}'s value needs different raw |
| and virtual formats. |
| |
| You should not use @code{REGISTER_CONVERT_TO_VIRTUAL} for a register |
| unless this macro returns a non-zero value for that register. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} int REGISTER_RAW_SIZE (int @var{reg}) |
| The size of register number @var{reg}'s raw value. This is the number |
| of bytes the register will occupy in @code{registers}, or in a @value{GDBN} |
| remote protocol packet. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} int REGISTER_VIRTUAL_SIZE (int @var{reg}) |
| The size of register number @var{reg}'s value, in its virtual format. |
| This is the size a @code{struct value}'s buffer will have, holding that |
| register's value. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} struct type *REGISTER_VIRTUAL_TYPE (int @var{reg}) |
| This is the type of the virtual representation of register number |
| @var{reg}. Note that there is no need for a macro giving a type for the |
| register's raw form; once the register's value has been obtained, @value{GDBN} |
| always uses the virtual form. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} void REGISTER_CONVERT_TO_VIRTUAL (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to}) |
| Convert the value of register number @var{reg} to @var{type}, which |
| should always be @code{REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer |
| at @var{from} holds the register's value in raw format; the macro should |
| convert the value to virtual format, and place it at @var{to}. |
| |
| Note that @code{REGISTER_CONVERT_TO_VIRTUAL} and |
| @code{REGISTER_CONVERT_TO_RAW} take their @var{reg} and @var{type} |
| arguments in different orders. |
| |
| You should only use @code{REGISTER_CONVERT_TO_VIRTUAL} with registers |
| for which the @code{REGISTER_CONVERTIBLE} macro returns a non-zero |
| value. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} void REGISTER_CONVERT_TO_RAW (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to}) |
| Convert the value of register number @var{reg} to @var{type}, which |
| should always be @code{REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer |
| at @var{from} holds the register's value in raw format; the macro should |
| convert the value to virtual format, and place it at @var{to}. |
| |
| Note that REGISTER_CONVERT_TO_VIRTUAL and REGISTER_CONVERT_TO_RAW take |
| their @var{reg} and @var{type} arguments in different orders. |
| @end deftypefn |
| |
| |
| @section Using Different Register and Memory Data Representations |
| @cindex register representation |
| @cindex memory representation |
| @cindex representations, register and memory |
| @cindex register data formats, converting |
| @cindex @code{struct value}, converting register contents to |
| |
| @emph{Maintainer's note: The way GDB manipulates registers is undergoing |
| significant change. Many of the macros and functions refered to in this |
| section are likely to be subject to further revision. See |
| @uref{http://sources.redhat.com/gdb/current/ari/, A.R. Index} and |
| @uref{http://www.gnu.org/software/gdb/bugs, Bug Tracking Database} for |
| further information. cagney/2002-05-06.} |
| |
| Some architectures can represent a data object in a register using a |
| form that is different to the objects more normal memory representation. |
| For example: |
| |
| @itemize @bullet |
| |
| @item |
| The Alpha architecture can represent 32 bit integer values in |
| floating-point registers. |
| |
| @item |
| The x86 architecture supports 80-bit floating-point registers. The |
| @code{long double} data type occupies 96 bits in memory but only 80 bits |
| when stored in a register. |
| |
| @end itemize |
| |
| In general, the register representation of a data type is determined by |
| the architecture, or @value{GDBN}'s interface to the architecture, while |
| the memory representation is determined by the Application Binary |
| Interface. |
| |
| For almost all data types on almost all architectures, the two |
| representations are identical, and no special handling is needed. |
| However, they do occasionally differ. Your architecture may define the |
| following macros to request conversions between the register and memory |
| representations of a data type: |
| |
| @deftypefn {Target Macro} int CONVERT_REGISTER_P (int @var{reg}) |
| Return non-zero if the representation of a data value stored in this |
| register may be different to the representation of that same data value |
| when stored in memory. |
| |
| When non-zero, the macros @code{REGISTER_TO_VALUE} and |
| @code{VALUE_TO_REGISTER} are used to perform any necessary conversion. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} void REGISTER_TO_VALUE (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to}) |
| Convert the value of register number @var{reg} to a data object of type |
| @var{type}. The buffer at @var{from} holds the register's value in raw |
| format; the converted value should be placed in the buffer at @var{to}. |
| |
| Note that @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} take |
| their @var{reg} and @var{type} arguments in different orders. |
| |
| You should only use @code{REGISTER_TO_VALUE} with registers for which |
| the @code{CONVERT_REGISTER_P} macro returns a non-zero value. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} void VALUE_TO_REGISTER (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to}) |
| Convert a data value of type @var{type} to register number @var{reg}' |
| raw format. |
| |
| Note that @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} take |
| their @var{reg} and @var{type} arguments in different orders. |
| |
| You should only use @code{VALUE_TO_REGISTER} with registers for which |
| the @code{CONVERT_REGISTER_P} macro returns a non-zero value. |
| @end deftypefn |
| |
| @deftypefn {Target Macro} void REGISTER_CONVERT_TO_TYPE (int @var{regnum}, struct type *@var{type}, char *@var{buf}) |
| See @file{mips-tdep.c}. It does not do what you want. |
| @end deftypefn |
| |
| |
| @section Frame Interpretation |
| |
| @section Inferior Call Setup |
| |
| @section Compiler Characteristics |
| |
| @section Target Conditionals |
| |
| This section describes the macros that you can use to define the target |
| machine. |
| |
| @table @code |
| |
| @item ADDR_BITS_REMOVE (addr) |
| @findex ADDR_BITS_REMOVE |
| If a raw machine instruction address includes any bits that are not |
| really part of the address, then define this macro to expand into an |
| expression that zeroes those bits in @var{addr}. This is only used for |
| addresses of instructions, and even then not in all contexts. |
| |
| For example, the two low-order bits of the PC on the Hewlett-Packard PA |
| 2.0 architecture contain the privilege level of the corresponding |
| instruction. Since instructions must always be aligned on four-byte |
| boundaries, the processor masks out these bits to generate the actual |
| address of the instruction. ADDR_BITS_REMOVE should filter out these |
| bits with an expression such as @code{((addr) & ~3)}. |
| |
| @item ADDRESS_CLASS_NAME_TO_TYPE_FLAGS (@var{name}, @var{type_flags_ptr}) |
| @findex ADDRESS_CLASS_NAME_TO_TYPE_FLAGS |
| If @var{name} is a valid address class qualifier name, set the @code{int} |
| referenced by @var{type_flags_ptr} to the mask representing the qualifier |
| and return 1. If @var{name} is not a valid address class qualifier name, |
| return 0. |
| |
| The value for @var{type_flags_ptr} should be one of |
| @code{TYPE_FLAG_ADDRESS_CLASS_1}, @code{TYPE_FLAG_ADDRESS_CLASS_2}, or |
| possibly some combination of these values or'd together. |
| @xref{Target Architecture Definition, , Address Classes}. |
| |
| @item ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P () |
| @findex ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P |
| Predicate which indicates whether @code{ADDRESS_CLASS_NAME_TO_TYPE_FLAGS} |
| has been defined. |
| |
| @item ADDRESS_CLASS_TYPE_FLAGS (@var{byte_size}, @var{dwarf2_addr_class}) |
| @findex ADDRESS_CLASS_TYPE_FLAGS (@var{byte_size}, @var{dwarf2_addr_class}) |
| Given a pointers byte size (as described by the debug information) and |
| the possible @code{DW_AT_address_class} value, return the type flags |
| used by @value{GDBN} to represent this address class. The value |
| returned should be one of @code{TYPE_FLAG_ADDRESS_CLASS_1}, |
| @code{TYPE_FLAG_ADDRESS_CLASS_2}, or possibly some combination of these |
| values or'd together. |
| @xref{Target Architecture Definition, , Address Classes}. |
| |
| @item ADDRESS_CLASS_TYPE_FLAGS_P () |
| @findex ADDRESS_CLASS_TYPE_FLAGS_P |
| Predicate which indicates whether @code{ADDRESS_CLASS_TYPE_FLAGS} has |
| been defined. |
| |
| @item ADDRESS_CLASS_TYPE_FLAGS_TO_NAME (@var{type_flags}) |
| @findex ADDRESS_CLASS_TYPE_FLAGS_TO_NAME |
| Return the name of the address class qualifier associated with the type |
| flags given by @var{type_flags}. |
| |
| @item ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P () |
| @findex ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P |
| Predicate which indicates whether @code{ADDRESS_CLASS_TYPE_FLAGS_TO_NAME} has |
| been defined. |
| @xref{Target Architecture Definition, , Address Classes}. |
| |
| @item ADDRESS_TO_POINTER (@var{type}, @var{buf}, @var{addr}) |
| @findex ADDRESS_TO_POINTER |
| Store in @var{buf} a pointer of type @var{type} representing the address |
| @var{addr}, in the appropriate format for the current architecture. |
| This macro may safely assume that @var{type} is either a pointer or a |
| C@t{++} reference type. |
| @xref{Target Architecture Definition, , Pointers Are Not Always Addresses}. |
| |
| @item BELIEVE_PCC_PROMOTION |
| @findex BELIEVE_PCC_PROMOTION |
| Define if the compiler promotes a @code{short} or @code{char} |
| parameter to an @code{int}, but still reports the parameter as its |
| original type, rather than the promoted type. |
| |
| @item BELIEVE_PCC_PROMOTION_TYPE |
| @findex BELIEVE_PCC_PROMOTION_TYPE |
| Define this if @value{GDBN} should believe the type of a @code{short} |
| argument when compiled by @code{pcc}, but look within a full int space to get |
| its value. Only defined for Sun-3 at present. |
| |
| @item BITS_BIG_ENDIAN |
| @findex BITS_BIG_ENDIAN |
| Define this if the numbering of bits in the targets does @strong{not} match the |
| endianness of the target byte order. A value of 1 means that the bits |
| are numbered in a big-endian bit order, 0 means little-endian. |
| |
| @item BREAKPOINT |
| @findex BREAKPOINT |
| This is the character array initializer for the bit pattern to put into |
| memory where a breakpoint is set. Although it's common to use a trap |
| instruction for a breakpoint, it's not required; for instance, the bit |
| pattern could be an invalid instruction. The breakpoint must be no |
| longer than the shortest instruction of the architecture. |
| |
| @code{BREAKPOINT} has been deprecated in favor of |
| @code{BREAKPOINT_FROM_PC}. |
| |
| @item BIG_BREAKPOINT |
| @itemx LITTLE_BREAKPOINT |
| @findex LITTLE_BREAKPOINT |
| @findex BIG_BREAKPOINT |
| Similar to BREAKPOINT, but used for bi-endian targets. |
| |
| @code{BIG_BREAKPOINT} and @code{LITTLE_BREAKPOINT} have been deprecated in |
| favor of @code{BREAKPOINT_FROM_PC}. |
| |
| @item REMOTE_BREAKPOINT |
| @itemx LITTLE_REMOTE_BREAKPOINT |
| @itemx BIG_REMOTE_BREAKPOINT |
| @findex BIG_REMOTE_BREAKPOINT |
| @findex LITTLE_REMOTE_BREAKPOINT |
| @findex REMOTE_BREAKPOINT |
| Similar to BREAKPOINT, but used for remote targets. |
| |
| @code{BIG_REMOTE_BREAKPOINT} and @code{LITTLE_REMOTE_BREAKPOINT} have been |
| deprecated in favor of @code{BREAKPOINT_FROM_PC}. |
| |
| @item BREAKPOINT_FROM_PC (@var{pcptr}, @var{lenptr}) |
| @findex BREAKPOINT_FROM_PC |
| Use the program counter to determine the contents and size of a |
| breakpoint instruction. It returns a pointer to a string of bytes |
| that encode a breakpoint instruction, stores the length of the string |
| to *@var{lenptr}, and adjusts pc (if necessary) to point to the actual |
| memory location where the breakpoint should be inserted. |
| |
| Although it is common to use a trap instruction for a breakpoint, it's |
| not required; for instance, the bit pattern could be an invalid |
| instruction. The breakpoint must be no longer than the shortest |
| instruction of the architecture. |
| |
| Replaces all the other @var{BREAKPOINT} macros. |
| |
| @item MEMORY_INSERT_BREAKPOINT (@var{addr}, @var{contents_cache}) |
| @itemx MEMORY_REMOVE_BREAKPOINT (@var{addr}, @var{contents_cache}) |
| @findex MEMORY_REMOVE_BREAKPOINT |
| @findex MEMORY_INSERT_BREAKPOINT |
| Insert or remove memory based breakpoints. Reasonable defaults |
| (@code{default_memory_insert_breakpoint} and |
| @code{default_memory_remove_breakpoint} respectively) have been |
| provided so that it is not necessary to define these for most |
| architectures. Architectures which may want to define |
| @code{MEMORY_INSERT_BREAKPOINT} and @code{MEMORY_REMOVE_BREAKPOINT} will |
| likely have instructions that are oddly sized or are not stored in a |
| conventional manner. |
| |
| It may also be desirable (from an efficiency standpoint) to define |
| custom breakpoint insertion and removal routines if |
| @code{BREAKPOINT_FROM_PC} needs to read the target's memory for some |
| reason. |
| |
| @item CALL_DUMMY_WORDS |
| @findex CALL_DUMMY_WORDS |
| Pointer to an array of @code{LONGEST} words of data containing |
| host-byte-ordered @code{REGISTER_BYTES} sized values that partially |
| specify the sequence of instructions needed for an inferior function |
| call. |
| |
| Should be deprecated in favor of a macro that uses target-byte-ordered |
| data. |
| |
| @item SIZEOF_CALL_DUMMY_WORDS |
| @findex SIZEOF_CALL_DUMMY_WORDS |
| The size of @code{CALL_DUMMY_WORDS}. This must return a positive value. |
| See also @code{CALL_DUMMY_LENGTH}. |
| |
| @item CALL_DUMMY |
| @findex CALL_DUMMY |
| A static initializer for @code{CALL_DUMMY_WORDS}. Deprecated. |
| |
| @item CALL_DUMMY_LOCATION |
| @findex CALL_DUMMY_LOCATION |
| See the file @file{inferior.h}. |
| |
| @item DEPRECATED_CALL_DUMMY_STACK_ADJUST |
| @findex DEPRECATED_CALL_DUMMY_STACK_ADJUST |
| Stack adjustment needed when performing an inferior function call. This |
| function is no longer needed. @xref{push_dummy_call}, which can handle |
| all alignment directly. |
| |
| @item CANNOT_FETCH_REGISTER (@var{regno}) |
| @findex CANNOT_FETCH_REGISTER |
| A C expression that should be nonzero if @var{regno} cannot be fetched |
| from an inferior process. This is only relevant if |
| @code{FETCH_INFERIOR_REGISTERS} is not defined. |
| |
| @item CANNOT_STORE_REGISTER (@var{regno}) |
| @findex CANNOT_STORE_REGISTER |
| A C expression that should be nonzero if @var{regno} should not be |
| written to the target. This is often the case for program counters, |
| status words, and other special registers. If this is not defined, |
| @value{GDBN} will assume that all registers may be written. |
| |
| @item DO_DEFERRED_STORES |
| @itemx CLEAR_DEFERRED_STORES |
| @findex CLEAR_DEFERRED_STORES |
| @findex DO_DEFERRED_STORES |
| Define this to execute any deferred stores of registers into the inferior, |
| and to cancel any deferred stores. |
| |
| Currently only implemented correctly for native Sparc configurations? |
| |
| @item int CONVERT_REGISTER_P(@var{regnum}) |
| @findex CONVERT_REGISTER_P |
| Return non-zero if register @var{regnum} can represent data values in a |
| non-standard form. |
| @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. |
| |
| @item DECR_PC_AFTER_BREAK |
| @findex DECR_PC_AFTER_BREAK |
| Define this to be the amount by which to decrement the PC after the |
| program encounters a breakpoint. This is often the number of bytes in |
| @code{BREAKPOINT}, though not always. For most targets this value will be 0. |
| |
| @item DECR_PC_AFTER_HW_BREAK |
| @findex DECR_PC_AFTER_HW_BREAK |
| Similarly, for hardware breakpoints. |
| |
| @item DISABLE_UNSETTABLE_BREAK (@var{addr}) |
| @findex DISABLE_UNSETTABLE_BREAK |
| If defined, this should evaluate to 1 if @var{addr} is in a shared |
| library in which breakpoints cannot be set and so should be disabled. |
| |
| @item PRINT_FLOAT_INFO() |
| @findex PRINT_FLOAT_INFO |
| If defined, then the @samp{info float} command will print information about |
| the processor's floating point unit. |
| |
| @item print_registers_info (@var{gdbarch}, @var{frame}, @var{regnum}, @var{all}) |
| @findex print_registers_info |
| If defined, pretty print the value of the register @var{regnum} for the |
| specified @var{frame}. If the value of @var{regnum} is -1, pretty print |
| either all registers (@var{all} is non zero) or a select subset of |
| registers (@var{all} is zero). |
| |
| The default method prints one register per line, and if @var{all} is |
| zero omits floating-point registers. |
| |
| @item PRINT_VECTOR_INFO() |
| @findex PRINT_VECTOR_INFO |
| If defined, then the @samp{info vector} command will call this function |
| to print information about the processor's vector unit. |
| |
| By default, the @samp{info vector} command will print all vector |
| registers (the register's type having the vector attribute). |
| |
| @item DWARF_REG_TO_REGNUM |
| @findex DWARF_REG_TO_REGNUM |
| Convert DWARF register number into @value{GDBN} regnum. If not defined, |
| no conversion will be performed. |
| |
| @item DWARF2_REG_TO_REGNUM |
| @findex DWARF2_REG_TO_REGNUM |
| Convert DWARF2 register number into @value{GDBN} regnum. If not |
| defined, no conversion will be performed. |
| |
| @item ECOFF_REG_TO_REGNUM |
| @findex ECOFF_REG_TO_REGNUM |
| Convert ECOFF register number into @value{GDBN} regnum. If not defined, |
| no conversion will be performed. |
| |
| @item END_OF_TEXT_DEFAULT |
| @findex END_OF_TEXT_DEFAULT |
| This is an expression that should designate the end of the text section. |
| @c (? FIXME ?) |
| |
| @item EXTRACT_RETURN_VALUE(@var{type}, @var{regbuf}, @var{valbuf}) |
| @findex EXTRACT_RETURN_VALUE |
| Define this to extract a function's return value of type @var{type} from |
| the raw register state @var{regbuf} and copy that, in virtual format, |
| into @var{valbuf}. |
| |
| @item EXTRACT_STRUCT_VALUE_ADDRESS(@var{regbuf}) |
| @findex EXTRACT_STRUCT_VALUE_ADDRESS |
| When defined, extract from the array @var{regbuf} (containing the raw |
| register state) the @code{CORE_ADDR} at which a function should return |
| its structure value. |
| |
| If not defined, @code{EXTRACT_RETURN_VALUE} is used. |
| |
| @item EXTRACT_STRUCT_VALUE_ADDRESS_P() |
| @findex EXTRACT_STRUCT_VALUE_ADDRESS_P |
| Predicate for @code{EXTRACT_STRUCT_VALUE_ADDRESS}. |
| |
| @item FP_REGNUM |
| @findex FP_REGNUM |
| If the virtual frame pointer is kept in a register, then define this |
| macro to be the number (greater than or equal to zero) of that register. |
| |
| This should only need to be defined if @code{TARGET_READ_FP} is not |
| defined. |
| |
| @item FRAMELESS_FUNCTION_INVOCATION(@var{fi}) |
| @findex FRAMELESS_FUNCTION_INVOCATION |
| Define this to an expression that returns 1 if the function invocation |
| represented by @var{fi} does not have a stack frame associated with it. |
| Otherwise return 0. |
| |
| @item frame_align (@var{address}) |
| @anchor{frame_align} |
| @findex frame_align |
| Define this to adjust @var{address} so that it meets the alignment |
| requirements for the start of a new stack frame. A stack frame's |
| alignment requirements are typically stronger than a target processors |
| stack alignment requirements (@pxref{STACK_ALIGN}). |
| |
| This function is used to ensure that, when creating a dummy frame, both |
| the initial stack pointer and (if needed) the address of the return |
| value are correctly aligned. |
| |
| Unlike @code{STACK_ALIGN}, this function always adjusts the address in |
| the direction of stack growth. |
| |
| By default, no frame based stack alignment is performed. |
| |
| @item FRAME_ARGS_ADDRESS_CORRECT |
| @findex FRAME_ARGS_ADDRESS_CORRECT |
| See @file{stack.c}. |
| |
| @item DEPRECATED_FRAME_CHAIN(@var{frame}) |
| @findex DEPRECATED_FRAME_CHAIN |
| Given @var{frame}, return a pointer to the calling frame. |
| |
| @item DEPRECATED_FRAME_CHAIN_VALID(@var{chain}, @var{thisframe}) |
| @findex DEPRECATED_FRAME_CHAIN_VALID |
| Define this to be an expression that returns zero if the given frame is an |
| outermost frame, with no caller, and nonzero otherwise. Most normal |
| situations can be handled without defining this macro, including @code{NULL} |
| chain pointers, dummy frames, and frames whose PC values are inside the |
| startup file (e.g.@: @file{crt0.o}), inside @code{main}, or inside |
| @code{_start}. |
| |
| @item DEPRECATED_FRAME_INIT_SAVED_REGS(@var{frame}) |
| @findex DEPRECATED_FRAME_INIT_SAVED_REGS |
| See @file{frame.h}. Determines the address of all registers in the |
| current stack frame storing each in @code{frame->saved_regs}. Space for |
| @code{frame->saved_regs} shall be allocated by |
| @code{DEPRECATED_FRAME_INIT_SAVED_REGS} using |
| @code{frame_saved_regs_zalloc}. |
| |
| @code{FRAME_FIND_SAVED_REGS} is deprecated. |
| |
| @item FRAME_NUM_ARGS (@var{fi}) |
| @findex FRAME_NUM_ARGS |
| For the frame described by @var{fi} return the number of arguments that |
| are being passed. If the number of arguments is not known, return |
| @code{-1}. |
| |
| @item DEPRECATED_FRAME_SAVED_PC(@var{frame}) |
| @findex DEPRECATED_FRAME_SAVED_PC |
| @anchor{DEPRECATED_FRAME_SAVED_PC} Given @var{frame}, return the pc |
| saved there. This is the return address. |
| |
| This method is deprecated. @xref{unwind_pc}. |
| |
| @item CORE_ADDR unwind_pc (struct frame_info *@var{this_frame}) |
| @findex unwind_pc |
| @anchor{unwind_pc} Return the instruction address, in @var{this_frame}'s |
| caller, at which execution will resume after @var{this_frame} returns. |
| This is commonly refered to as the return address. |
| |
| The implementation, which must be frame agnostic (work with any frame), |
| is typically no more than: |
| |
| @smallexample |
| ULONGEST pc; |
| frame_unwind_unsigned_register (this_frame, D10V_PC_REGNUM, &pc); |
| return d10v_make_iaddr (pc); |
| @end smallexample |
| |
| @noindent |
| @xref{DEPRECATED_FRAME_SAVED_PC}, which this method replaces. |
| |
| @item FUNCTION_EPILOGUE_SIZE |
| @findex FUNCTION_EPILOGUE_SIZE |
| For some COFF targets, the @code{x_sym.x_misc.x_fsize} field of the |
| function end symbol is 0. For such targets, you must define |
| @code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size of a |
| function's epilogue. |
| |
| @item FUNCTION_START_OFFSET |
| @findex FUNCTION_START_OFFSET |
| An integer, giving the offset in bytes from a function's address (as |
| used in the values of symbols, function pointers, etc.), and the |
| function's first genuine instruction. |
| |
| This is zero on almost all machines: the function's address is usually |
| the address of its first instruction. However, on the VAX, for example, |
| each function starts with two bytes containing a bitmask indicating |
| which registers to save upon entry to the function. The VAX @code{call} |
| instructions check this value, and save the appropriate registers |
| automatically. Thus, since the offset from the function's address to |
| its first instruction is two bytes, @code{FUNCTION_START_OFFSET} would |
| be 2 on the VAX. |
| |
| @item GCC_COMPILED_FLAG_SYMBOL |
| @itemx GCC2_COMPILED_FLAG_SYMBOL |
| @findex GCC2_COMPILED_FLAG_SYMBOL |
| @findex GCC_COMPILED_FLAG_SYMBOL |
| If defined, these are the names of the symbols that @value{GDBN} will |
| look for to detect that GCC compiled the file. The default symbols |
| are @code{gcc_compiled.} and @code{gcc2_compiled.}, |
| respectively. (Currently only defined for the Delta 68.) |
| |
| @item @value{GDBN}_MULTI_ARCH |
| @findex @value{GDBN}_MULTI_ARCH |
| If defined and non-zero, enables support for multiple architectures |
| within @value{GDBN}. |
| |
| This support can be enabled at two levels. At level one, only |
| definitions for previously undefined macros are provided; at level two, |
| a multi-arch definition of all architecture dependent macros will be |
| defined. |
| |
| @item @value{GDBN}_TARGET_IS_HPPA |
| @findex @value{GDBN}_TARGET_IS_HPPA |
| This determines whether horrible kludge code in @file{dbxread.c} and |
| @file{partial-stab.h} is used to mangle multiple-symbol-table files from |
| HPPA's. This should all be ripped out, and a scheme like @file{elfread.c} |
| used instead. |
| |
| @item GET_LONGJMP_TARGET |
| @findex GET_LONGJMP_TARGET |
| For most machines, this is a target-dependent parameter. On the |
| DECstation and the Iris, this is a native-dependent parameter, since |
| the header file @file{setjmp.h} is needed to define it. |
| |
| This macro determines the target PC address that @code{longjmp} will jump to, |
| assuming that we have just stopped at a @code{longjmp} breakpoint. It takes a |
| @code{CORE_ADDR *} as argument, and stores the target PC value through this |
| pointer. It examines the current state of the machine as needed. |
| |
| @item DEPRECATED_GET_SAVED_REGISTER |
| @findex DEPRECATED_GET_SAVED_REGISTER |
| Define this if you need to supply your own definition for the function |
| @code{DEPRECATED_GET_SAVED_REGISTER}. |
| |
| @item IBM6000_TARGET |
| @findex IBM6000_TARGET |
| Shows that we are configured for an IBM RS/6000 target. This |
| conditional should be eliminated (FIXME) and replaced by |
| feature-specific macros. It was introduced in a haste and we are |
| repenting at leisure. |
| |
| @item I386_USE_GENERIC_WATCHPOINTS |
| An x86-based target can define this to use the generic x86 watchpoint |
| support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}. |
| |
| @item SYMBOLS_CAN_START_WITH_DOLLAR |
| @findex SYMBOLS_CAN_START_WITH_DOLLAR |
| Some systems have routines whose names start with @samp{$}. Giving this |
| macro a non-zero value tells @value{GDBN}'s expression parser to check for such |
| routines when parsing tokens that begin with @samp{$}. |
| |
| On HP-UX, certain system routines (millicode) have names beginning with |
| @samp{$} or @samp{$$}. For example, @code{$$dyncall} is a millicode |
| routine that handles inter-space procedure calls on PA-RISC. |
| |
| @item DEPRECATED_INIT_EXTRA_FRAME_INFO (@var{fromleaf}, @var{frame}) |
| @findex DEPRECATED_INIT_EXTRA_FRAME_INFO |
| If additional information about the frame is required this should be |
| stored in @code{frame->extra_info}. Space for @code{frame->extra_info} |
| is allocated using @code{frame_extra_info_zalloc}. |
| |
| @item DEPRECATED_INIT_FRAME_PC (@var{fromleaf}, @var{prev}) |
| @findex DEPRECATED_INIT_FRAME_PC |
| This is a C statement that sets the pc of the frame pointed to by |
| @var{prev}. [By default...] |
| |
| @item INNER_THAN (@var{lhs}, @var{rhs}) |
| @findex INNER_THAN |
| Returns non-zero if stack address @var{lhs} is inner than (nearer to the |
| stack top) stack address @var{rhs}. Define this as @code{lhs < rhs} if |
| the target's stack grows downward in memory, or @code{lhs > rsh} if the |
| stack grows upward. |
| |
| @item gdbarch_in_function_epilogue_p (@var{gdbarch}, @var{pc}) |
| @findex gdbarch_in_function_epilogue_p |
| Returns non-zero if the given @var{pc} is in the epilogue of a function. |
| The epilogue of a function is defined as the part of a function where |
| the stack frame of the function already has been destroyed up to the |
| final `return from function call' instruction. |
| |
| @item SIGTRAMP_START (@var{pc}) |
| @findex SIGTRAMP_START |
| @itemx SIGTRAMP_END (@var{pc}) |
| @findex SIGTRAMP_END |
| Define these to be the start and end address of the @code{sigtramp} for the |
| given @var{pc}. On machines where the address is just a compile time |
| constant, the macro expansion will typically just ignore the supplied |
| @var{pc}. |
| |
| @item IN_SOLIB_CALL_TRAMPOLINE (@var{pc}, @var{name}) |
| @findex IN_SOLIB_CALL_TRAMPOLINE |
| Define this to evaluate to nonzero if the program is stopped in the |
| trampoline that connects to a shared library. |
| |
| @item IN_SOLIB_RETURN_TRAMPOLINE (@var{pc}, @var{name}) |
| @findex IN_SOLIB_RETURN_TRAMPOLINE |
| Define this to evaluate to nonzero if the program is stopped in the |
| trampoline that returns from a shared library. |
| |
| @item IN_SOLIB_DYNSYM_RESOLVE_CODE (@var{pc}) |
| @findex IN_SOLIB_DYNSYM_RESOLVE_CODE |
| Define this to evaluate to nonzero if the program is stopped in the |
| dynamic linker. |
| |
| @item SKIP_SOLIB_RESOLVER (@var{pc}) |
| @findex SKIP_SOLIB_RESOLVER |
| Define this to evaluate to the (nonzero) address at which execution |
| should continue to get past the dynamic linker's symbol resolution |
| function. A zero value indicates that it is not important or necessary |
| to set a breakpoint to get through the dynamic linker and that single |
| stepping will suffice. |
| |
| @item INTEGER_TO_ADDRESS (@var{type}, @var{buf}) |
| @findex INTEGER_TO_ADDRESS |
| @cindex converting integers to addresses |
| Define this when the architecture needs to handle non-pointer to address |
| conversions specially. Converts that value to an address according to |
| the current architectures conventions. |
| |
| @emph{Pragmatics: When the user copies a well defined expression from |
| their source code and passes it, as a parameter, to @value{GDBN}'s |
| @code{print} command, they should get the same value as would have been |
| computed by the target program. Any deviation from this rule can cause |
| major confusion and annoyance, and needs to be justified carefully. In |
| other words, @value{GDBN} doesn't really have the freedom to do these |
| conversions in clever and useful ways. It has, however, been pointed |
| out that users aren't complaining about how @value{GDBN} casts integers |
| to pointers; they are complaining that they can't take an address from a |
| disassembly listing and give it to @code{x/i}. Adding an architecture |
| method like @code{INTEGER_TO_ADDRESS} certainly makes it possible for |
| @value{GDBN} to ``get it right'' in all circumstances.} |
| |
| @xref{Target Architecture Definition, , Pointers Are Not Always |
| Addresses}. |
| |
| @item NEED_TEXT_START_END |
| @findex NEED_TEXT_START_END |
| Define this if @value{GDBN} should determine the start and end addresses of the |
| text section. (Seems dubious.) |
| |
| @item NO_HIF_SUPPORT |
| @findex NO_HIF_SUPPORT |
| (Specific to the a29k.) |
| |
| @item POINTER_TO_ADDRESS (@var{type}, @var{buf}) |
| @findex POINTER_TO_ADDRESS |
| Assume that @var{buf} holds a pointer of type @var{type}, in the |
| appropriate format for the current architecture. Return the byte |
| address the pointer refers to. |
| @xref{Target Architecture Definition, , Pointers Are Not Always Addresses}. |
| |
| @item REGISTER_CONVERTIBLE (@var{reg}) |
| @findex REGISTER_CONVERTIBLE |
| Return non-zero if @var{reg} uses different raw and virtual formats. |
| @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. |
| |
| @item REGISTER_TO_VALUE(@var{regnum}, @var{type}, @var{from}, @var{to}) |
| @findex REGISTER_TO_VALUE |
| Convert the raw contents of register @var{regnum} into a value of type |
| @var{type}. |
| @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. |
| |
| @item REGISTER_RAW_SIZE (@var{reg}) |
| @findex REGISTER_RAW_SIZE |
| Return the raw size of @var{reg}; defaults to the size of the register's |
| virtual type. |
| @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. |
| |
| @item register_reggroup_p (@var{gdbarch}, @var{regnum}, @var{reggroup}) |
| @findex register_reggroup_p |
| @cindex register groups |
| Return non-zero if register @var{regnum} is a member of the register |
| group @var{reggroup}. |
| |
| By default, registers are grouped as follows: |
| |
| @table @code |
| @item float_reggroup |
| Any register with a valid name and a floating-point type. |
| @item vector_reggroup |
| Any register with a valid name and a vector type. |
| @item general_reggroup |
| Any register with a valid name and a type other than vector or |
| floating-point. @samp{float_reggroup}. |
| @item save_reggroup |
| @itemx restore_reggroup |
| @itemx all_reggroup |
| Any register with a valid name. |
| @end table |
| |
| @item REGISTER_VIRTUAL_SIZE (@var{reg}) |
| @findex REGISTER_VIRTUAL_SIZE |
| Return the virtual size of @var{reg}; defaults to the size of the |
| register's virtual type. |
| Return the virtual size of @var{reg}. |
| @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. |
| |
| @item REGISTER_VIRTUAL_TYPE (@var{reg}) |
| @findex REGISTER_VIRTUAL_TYPE |
| Return the virtual type of @var{reg}. |
| @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. |
| |
| @item struct type *register_type (@var{gdbarch}, @var{reg}) |
| @findex register_type |
| If defined, return the type of register @var{reg}. This function |
| superseeds @code{REGISTER_VIRTUAL_TYPE}. @xref{Target Architecture |
| Definition, , Raw and Virtual Register Representations}. |
| |
| @item REGISTER_CONVERT_TO_VIRTUAL(@var{reg}, @var{type}, @var{from}, @var{to}) |
| @findex REGISTER_CONVERT_TO_VIRTUAL |
| Convert the value of register @var{reg} from its raw form to its virtual |
| form. |
| @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. |
| |
| @item REGISTER_CONVERT_TO_RAW(@var{type}, @var{reg}, @var{from}, @var{to}) |
| @findex REGISTER_CONVERT_TO_RAW |
| Convert the value of register @var{reg} from its virtual form to its raw |
| form. |
| @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. |
| |
| @item RETURN_VALUE_ON_STACK(@var{type}) |
| @findex RETURN_VALUE_ON_STACK |
| @cindex returning structures by value |
| @cindex structures, returning by value |
| |
| Return non-zero if values of type TYPE are returned on the stack, using |
| the ``struct convention'' (i.e., the caller provides a pointer to a |
| buffer in which the callee should store the return value). This |
| controls how the @samp{finish} command finds a function's return value, |
| and whether an inferior function call reserves space on the stack for |
| the return value. |
| |
| The full logic @value{GDBN} uses here is kind of odd. |
| |
| @itemize @bullet |
| @item |
| If the type being returned by value is not a structure, union, or array, |
| and @code{RETURN_VALUE_ON_STACK} returns zero, then @value{GDBN} |
| concludes the value is not returned using the struct convention. |
| |
| @item |
| Otherwise, @value{GDBN} calls @code{USE_STRUCT_CONVENTION} (see below). |
| If that returns non-zero, @value{GDBN} assumes the struct convention is |
| in use. |
| @end itemize |
| |
| In other words, to indicate that a given type is returned by value using |
| the struct convention, that type must be either a struct, union, array, |
| or something @code{RETURN_VALUE_ON_STACK} likes, @emph{and} something |
| that @code{USE_STRUCT_CONVENTION} likes. |
| |
| Note that, in C and C@t{++}, arrays are never returned by value. In those |
| languages, these predicates will always see a pointer type, never an |
| array type. All the references above to arrays being returned by value |
| apply only to other languages. |
| |
| @item SOFTWARE_SINGLE_STEP_P() |
| @findex SOFTWARE_SINGLE_STEP_P |
| Define this as 1 if the target does not have a hardware single-step |
| mechanism. The macro @code{SOFTWARE_SINGLE_STEP} must also be defined. |
| |
| @item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breapoints_p}) |
| @findex SOFTWARE_SINGLE_STEP |
| A function that inserts or removes (depending on |
| @var{insert_breapoints_p}) breakpoints at each possible destinations of |
| the next instruction. See @file{sparc-tdep.c} and @file{rs6000-tdep.c} |
| for examples. |
| |
| @item SOFUN_ADDRESS_MAYBE_MISSING |
| @findex SOFUN_ADDRESS_MAYBE_MISSING |
| Somebody clever observed that, the more actual addresses you have in the |
| debug information, the more time the linker has to spend relocating |
| them. So whenever there's some other way the debugger could find the |
| address it needs, you should omit it from the debug info, to make |
| linking faster. |
| |
| @code{SOFUN_ADDRESS_MAYBE_MISSING} indicates that a particular set of |
| hacks of this sort are in use, affecting @code{N_SO} and @code{N_FUN} |
| entries in stabs-format debugging information. @code{N_SO} stabs mark |
| the beginning and ending addresses of compilation units in the text |
| segment. @code{N_FUN} stabs mark the starts and ends of functions. |
| |
| @code{SOFUN_ADDRESS_MAYBE_MISSING} means two things: |
| |
| @itemize @bullet |
| @item |
| @code{N_FUN} stabs have an address of zero. Instead, you should find the |
| addresses where the function starts by taking the function name from |
| the stab, and then looking that up in the minsyms (the |
| linker/assembler symbol table). In other words, the stab has the |
| name, and the linker/assembler symbol table is the only place that carries |
| the address. |
| |
| @item |
| @code{N_SO} stabs have an address of zero, too. You just look at the |
| @code{N_FUN} stabs that appear before and after the @code{N_SO} stab, |
| and guess the starting and ending addresses of the compilation unit from |
| them. |
| @end itemize |
| |
| @item PCC_SOL_BROKEN |
| @findex PCC_SOL_BROKEN |
| (Used only in the Convex target.) |
| |
| @item PC_IN_SIGTRAMP (@var{pc}, @var{name}) |
| @findex PC_IN_SIGTRAMP |
| @cindex sigtramp |
| The @dfn{sigtramp} is a routine that the kernel calls (which then calls |
| the signal handler). On most machines it is a library routine that is |
| linked into the executable. |
| |
| This function, given a program counter value in @var{pc} and the |
| (possibly NULL) name of the function in which that @var{pc} resides, |
| returns nonzero if the @var{pc} and/or @var{name} show that we are in |
| sigtramp. |
| |
| @item PC_LOAD_SEGMENT |
| @findex PC_LOAD_SEGMENT |
| If defined, print information about the load segment for the program |
| counter. (Defined only for the RS/6000.) |
| |
| @item PC_REGNUM |
| @findex PC_REGNUM |
| If the program counter is kept in a register, then define this macro to |
| be the number (greater than or equal to zero) of that register. |
| |
| This should only need to be defined if @code{TARGET_READ_PC} and |
| @code{TARGET_WRITE_PC} are not defined. |
| |
| @item NPC_REGNUM |
| @findex NPC_REGNUM |
| The number of the ``next program counter'' register, if defined. |
| |
| @item PARM_BOUNDARY |
| @findex PARM_BOUNDARY |
| If non-zero, round arguments to a boundary of this many bits before |
| pushing them on the stack. |
| |
| @item PROCESS_LINENUMBER_HOOK |
| @findex PROCESS_LINENUMBER_HOOK |
| A hook defined for XCOFF reading. |
| |
| @item PROLOGUE_FIRSTLINE_OVERLAP |
| @findex PROLOGUE_FIRSTLINE_OVERLAP |
| (Only used in unsupported Convex configuration.) |
| |
| @item PS_REGNUM |
| @findex PS_REGNUM |
| If defined, this is the number of the processor status register. (This |
| definition is only used in generic code when parsing "$ps".) |
| |
| @item DEPRECATED_POP_FRAME |
| @findex DEPRECATED_POP_FRAME |
| @findex frame_pop |
| If defined, used by @code{frame_pop} to remove a stack frame. This |
| method has been superseeded by generic code. |
| |
| @item push_dummy_call (@var{gdbarch}, @var{regcache}, @var{dummy_addr}, @var{nargs}, @var{args}, @var{sp}, @var{struct_return}, @var{struct_addr}) |
| @findex push_dummy_call |
| @findex DEPRECATED_PUSH_ARGUMENTS. |
| @anchor{push_dummy_call} |
| Define this to push the dummy frame's call to the inferior function onto |
| the stack. In addition to pushing @var{nargs}, the code should push |
| @var{struct_addr} (when @var{struct_return}), and the return value (in |
| the call dummy at @var{dummy_addr}). |
| |
| Returns the updated top-of-stack pointer. |
| |
| This method replaces @code{DEPRECATED_PUSH_ARGUMENTS}. |
| |
| @item DEPRECATED_PUSH_DUMMY_FRAME |
| @findex DEPRECATED_PUSH_DUMMY_FRAME |
| Used in @samp{call_function_by_hand} to create an artificial stack frame. |
| |
| @item REGISTER_BYTES |
| @findex REGISTER_BYTES |
| The total amount of space needed to store @value{GDBN}'s copy of the machine's |
| register state. |
| |
| @item REGISTER_NAME(@var{i}) |
| @findex REGISTER_NAME |
| Return the name of register @var{i} as a string. May return @code{NULL} |
| or @code{NUL} to indicate that register @var{i} is not valid. |
| |
| @item REGISTER_NAMES |
| @findex REGISTER_NAMES |
| Deprecated in favor of @code{REGISTER_NAME}. |
| |
| @item REG_STRUCT_HAS_ADDR (@var{gcc_p}, @var{type}) |
| @findex REG_STRUCT_HAS_ADDR |
| Define this to return 1 if the given type will be passed by pointer |
| rather than directly. |
| |
| @item SAVE_DUMMY_FRAME_TOS (@var{sp}) |
| @findex SAVE_DUMMY_FRAME_TOS |
| @anchor{SAVE_DUMMY_FRAME_TOS} Used in @samp{call_function_by_hand} to |
| notify the target dependent code of the top-of-stack value that will be |
| passed to the the inferior code. This is the value of the @code{SP} |
| after both the dummy frame and space for parameters/results have been |
| allocated on the stack. @xref{unwind_dummy_id}. |
| |
| @item SDB_REG_TO_REGNUM |
| @findex SDB_REG_TO_REGNUM |
| Define this to convert sdb register numbers into @value{GDBN} regnums. If not |
| defined, no conversion will be done. |
| |
| @item SKIP_PERMANENT_BREAKPOINT |
| @findex SKIP_PERMANENT_BREAKPOINT |
| Advance the inferior's PC past a permanent breakpoint. @value{GDBN} normally |
| steps over a breakpoint by removing it, stepping one instruction, and |
| re-inserting the breakpoint. However, permanent breakpoints are |
| hardwired into the inferior, and can't be removed, so this strategy |
| doesn't work. Calling @code{SKIP_PERMANENT_BREAKPOINT} adjusts the processor's |
| state so that execution will resume just after the breakpoint. This |
| macro does the right thing even when the breakpoint is in the delay slot |
| of a branch or jump. |
| |
| @item SKIP_PROLOGUE (@var{pc}) |
| @findex SKIP_PROLOGUE |
| A C expression that returns the address of the ``real'' code beyond the |
| function entry prologue found at @var{pc}. |
| |
| @item SKIP_TRAMPOLINE_CODE (@var{pc}) |
| @findex SKIP_TRAMPOLINE_CODE |
| If the target machine has trampoline code that sits between callers and |
| the functions being called, then define this macro to return a new PC |
| that is at the start of the real function. |
| |
| @item SP_REGNUM |
| @findex SP_REGNUM |
| If the stack-pointer is kept in a register, then define this macro to be |
| the number (greater than or equal to zero) of that register, or -1 if |
| there is no such register. |
| |
| @item STAB_REG_TO_REGNUM |
| @findex STAB_REG_TO_REGNUM |
| Define this to convert stab register numbers (as gotten from `r' |
| declarations) into @value{GDBN} regnums. If not defined, no conversion will be |
| done. |
| |
| @item STACK_ALIGN (@var{addr}) |
| @anchor{STACK_ALIGN} |
| @findex STACK_ALIGN |
| Define this to increase @var{addr} so that it meets the alignment |
| requirements for the processor's stack. |
| |
| Unlike @ref{frame_align}, this function always adjusts @var{addr} |
| upwards. |
| |
| By default, no stack alignment is performed. |
| |
| @item STEP_SKIPS_DELAY (@var{addr}) |
| @findex STEP_SKIPS_DELAY |
| Define this to return true if the address is of an instruction with a |
| delay slot. If a breakpoint has been placed in the instruction's delay |
| slot, @value{GDBN} will single-step over that instruction before resuming |
| normally. Currently only defined for the Mips. |
| |
| @item STORE_RETURN_VALUE (@var{type}, @var{regcache}, @var{valbuf}) |
| @findex STORE_RETURN_VALUE |
| A C expression that writes the function return value, found in |
| @var{valbuf}, into the @var{regcache}. @var{type} is the type of the |
| value that is to be returned. |
| |
| @item SUN_FIXED_LBRAC_BUG |
| @findex SUN_FIXED_LBRAC_BUG |
| (Used only for Sun-3 and Sun-4 targets.) |
| |
| @item SYMBOL_RELOADING_DEFAULT |
| @findex SYMBOL_RELOADING_DEFAULT |
| The default value of the ``symbol-reloading'' variable. (Never defined in |
| current sources.) |
| |
| @item TARGET_CHAR_BIT |
| @findex TARGET_CHAR_BIT |
| Number of bits in a char; defaults to 8. |
| |
| @item TARGET_CHAR_SIGNED |
| @findex TARGET_CHAR_SIGNED |
| Non-zero if @code{char} is normally signed on this architecture; zero if |
| it should be unsigned. |
| |
| The ISO C standard requires the compiler to treat @code{char} as |
| equivalent to either @code{signed char} or @code{unsigned char}; any |
| character in the standard execution set is supposed to be positive. |
| Most compilers treat @code{char} as signed, but @code{char} is unsigned |
| on the IBM S/390, RS6000, and PowerPC targets. |
| |
| @item TARGET_COMPLEX_BIT |
| @findex TARGET_COMPLEX_BIT |
| Number of bits in a complex number; defaults to @code{2 * TARGET_FLOAT_BIT}. |
| |
| At present this macro is not used. |
| |
| @item TARGET_DOUBLE_BIT |
| @findex TARGET_DOUBLE_BIT |
| Number of bits in a double float; defaults to @code{8 * TARGET_CHAR_BIT}. |
| |
| @item TARGET_DOUBLE_COMPLEX_BIT |
| @findex TARGET_DOUBLE_COMPLEX_BIT |
| Number of bits in a double complex; defaults to @code{2 * TARGET_DOUBLE_BIT}. |
| |
| At present this macro is not used. |
| |
| @item TARGET_FLOAT_BIT |
| @findex TARGET_FLOAT_BIT |
| Number of bits in a float; defaults to @code{4 * TARGET_CHAR_BIT}. |
| |
| @item TARGET_INT_BIT |
| @findex TARGET_INT_BIT |
| Number of bits in an integer; defaults to @code{4 * TARGET_CHAR_BIT}. |
| |
| @item TARGET_LONG_BIT |
| @findex TARGET_LONG_BIT |
| Number of bits in a long integer; defaults to @code{4 * TARGET_CHAR_BIT}. |
| |
| @item TARGET_LONG_DOUBLE_BIT |
| @findex TARGET_LONG_DOUBLE_BIT |
| Number of bits in a long double float; |
| defaults to @code{2 * TARGET_DOUBLE_BIT}. |
| |
| @item TARGET_LONG_LONG_BIT |
| @findex TARGET_LONG_LONG_BIT |
| Number of bits in a long long integer; defaults to @code{2 * TARGET_LONG_BIT}. |
| |
| @item TARGET_PTR_BIT |
| @findex TARGET_PTR_BIT |
| Number of bits in a pointer; defaults to @code{TARGET_INT_BIT}. |
| |
| @item TARGET_SHORT_BIT |
| @findex TARGET_SHORT_BIT |
| Number of bits in a short integer; defaults to @code{2 * TARGET_CHAR_BIT}. |
| |
| @item TARGET_READ_PC |
| @findex TARGET_READ_PC |
| @itemx TARGET_WRITE_PC (@var{val}, @var{pid}) |
| @findex TARGET_WRITE_PC |
| @itemx TARGET_READ_SP |
| @findex TARGET_READ_SP |
| @itemx TARGET_READ_FP |
| @findex TARGET_READ_FP |
| @findex read_pc |
| @findex write_pc |
| @findex read_sp |
| @findex read_fp |
| These change the behavior of @code{read_pc}, @code{write_pc}, |
| @code{read_sp} and @code{read_fp}. For most targets, these may be left |
| undefined. @value{GDBN} will call the read and write register functions |
| with the relevant @code{_REGNUM} argument. |
| |
| These macros are useful when a target keeps one of these registers in a |
| hard to get at place; for example, part in a segment register and part |
| in an ordinary register. |
| |
| @item TARGET_VIRTUAL_FRAME_POINTER(@var{pc}, @var{regp}, @var{offsetp}) |
| @findex TARGET_VIRTUAL_FRAME_POINTER |
| Returns a @code{(register, offset)} pair representing the virtual |
| frame pointer in use at the code address @var{pc}. If virtual |
| frame pointers are not used, a default definition simply returns |
| @code{FP_REGNUM}, with an offset of zero. |
| |
| @item TARGET_HAS_HARDWARE_WATCHPOINTS |
| If non-zero, the target has support for hardware-assisted |
| watchpoints. @xref{Algorithms, watchpoints}, for more details and |
| other related macros. |
| |
| @item TARGET_PRINT_INSN (@var{addr}, @var{info}) |
| @findex TARGET_PRINT_INSN |
| This is the function used by @value{GDBN} to print an assembly |
| instruction. It prints the instruction at address @var{addr} in |
| debugged memory and returns the length of the instruction, in bytes. If |
| a target doesn't define its own printing routine, it defaults to an |
| accessor function for the global pointer @code{tm_print_insn}. This |
| usually points to a function in the @code{opcodes} library (@pxref{Support |
| Libraries, ,Opcodes}). @var{info} is a structure (of type |
| @code{disassemble_info}) defined in @file{include/dis-asm.h} used to |
| pass information to the instruction decoding routine. |
| |
| @item struct frame_id unwind_dummy_id (struct frame_info *@var{frame}) |
| @findex unwind_dummy_id |
| @anchor{unwind_dummy_id} Given @var{frame} return a @code{struct |
| frame_id} that uniquely identifies an inferior function call's dummy |
| frame. The value returned must match the dummy frame stack value |
| previously saved using @code{SAVE_DUMMY_FRAME_TOS}. |
| @xref{SAVE_DUMMY_FRAME_TOS}. |
| |
| @item USE_STRUCT_CONVENTION (@var{gcc_p}, @var{type}) |
| @findex USE_STRUCT_CONVENTION |
| If defined, this must be an expression that is nonzero if a value of the |
| given @var{type} being returned from a function must have space |
| allocated for it on the stack. @var{gcc_p} is true if the function |
| being considered is known to have been compiled by GCC; this is helpful |
| for systems where GCC is known to use different calling convention than |
| other compilers. |
| |
| @item VALUE_TO_REGISTER(@var{type}, @var{regnum}, @var{from}, @var{to}) |
| @findex VALUE_TO_REGISTER |
| Convert a value of type @var{type} into the raw contents of register |
| @var{regnum}'s. |
| @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. |
| |
| @item VARIABLES_INSIDE_BLOCK (@var{desc}, @var{gcc_p}) |
| @findex VARIABLES_INSIDE_BLOCK |
| For dbx-style debugging information, if the compiler puts variable |
| declarations inside LBRAC/RBRAC blocks, this should be defined to be |
| nonzero. @var{desc} is the value of @code{n_desc} from the |
| @code{N_RBRAC} symbol, and @var{gcc_p} is true if @value{GDBN} has noticed the |
| presence of either the @code{GCC_COMPILED_SYMBOL} or the |
| @code{GCC2_COMPILED_SYMBOL}. By default, this is 0. |
| |
| @item OS9K_VARIABLES_INSIDE_BLOCK (@var{desc}, @var{gcc_p}) |
| @findex OS9K_VARIABLES_INSIDE_BLOCK |
| Similarly, for OS/9000. Defaults to 1. |
| @end table |
| |
| Motorola M68K target conditionals. |
| |
| @ftable @code |
| @item BPT_VECTOR |
| Define this to be the 4-bit location of the breakpoint trap vector. If |
| not defined, it will default to @code{0xf}. |
| |
| @item REMOTE_BPT_VECTOR |
| Defaults to @code{1}. |
| |
| @item NAME_OF_MALLOC |
| @findex NAME_OF_MALLOC |
| A string containing the name of the function to call in order to |
| allocate some memory in the inferior. The default value is "malloc". |
| |
| @end ftable |
| |
| @section Adding a New Target |
| |
| @cindex adding a target |
| The following files add a target to @value{GDBN}: |
| |
| @table @file |
| @vindex TDEPFILES |
| @item gdb/config/@var{arch}/@var{ttt}.mt |
| Contains a Makefile fragment specific to this target. Specifies what |
| object files are needed for target @var{ttt}, by defining |
| @samp{TDEPFILES=@dots{}} and @samp{TDEPLIBS=@dots{}}. Also specifies |
| the header file which describes @var{ttt}, by defining @samp{TM_FILE= |
| tm-@var{ttt}.h}. |
| |
| You can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS}, |
| but these are now deprecated, replaced by autoconf, and may go away in |
| future versions of @value{GDBN}. |
| |
| @item gdb/@var{ttt}-tdep.c |
| Contains any miscellaneous code required for this target machine. On |
| some machines it doesn't exist at all. Sometimes the macros in |
| @file{tm-@var{ttt}.h} become very complicated, so they are implemented |
| as functions here instead, and the macro is simply defined to call the |
| function. This is vastly preferable, since it is easier to understand |
| and debug. |
| |
| @item gdb/@var{arch}-tdep.c |
| @itemx gdb/@var{arch}-tdep.h |
| This often exists to describe the basic layout of the target machine's |
| processor chip (registers, stack, etc.). If used, it is included by |
| @file{@var{ttt}-tdep.h}. It can be shared among many targets that use |
| the same processor. |
| |
| @item gdb/config/@var{arch}/tm-@var{ttt}.h |
| (@file{tm.h} is a link to this file, created by @code{configure}). Contains |
| macro definitions about the target machine's registers, stack frame |
| format and instructions. |
| |
| New targets do not need this file and should not create it. |
| |
| @item gdb/config/@var{arch}/tm-@var{arch}.h |
| This often exists to describe the basic layout of the target machine's |
| processor chip (registers, stack, etc.). If used, it is included by |
| @file{tm-@var{ttt}.h}. It can be shared among many targets that use the |
| same processor. |
| |
| New targets do not need this file and should not create it. |
| |
| @end table |
| |
| If you are adding a new operating system for an existing CPU chip, add a |
| @file{config/tm-@var{os}.h} file that describes the operating system |
| facilities that are unusual (extra symbol table info; the breakpoint |
| instruction needed; etc.). Then write a @file{@var{arch}/tm-@var{os}.h} |
| that just @code{#include}s @file{tm-@var{arch}.h} and |
| @file{config/tm-@var{os}.h}. |
| |
| |
| @section Converting an existing Target Architecture to Multi-arch |
| @cindex converting targets to multi-arch |
| |
| This section describes the current accepted best practice for converting |
| an existing target architecture to the multi-arch framework. |
| |
| The process consists of generating, testing, posting and committing a |
| sequence of patches. Each patch must contain a single change, for |
| instance: |
| |
| @itemize @bullet |
| |
| @item |
| Directly convert a group of functions into macros (the conversion does |
| not change the behavior of any of the functions). |
| |
| @item |
| Replace a non-multi-arch with a multi-arch mechanism (e.g., |
| @code{FRAME_INFO}). |
| |
| @item |
| Enable multi-arch level one. |
| |
| @item |
| Delete one or more files. |
| |
| @end itemize |
| |
| @noindent |
| There isn't a size limit on a patch, however, a developer is strongly |
| encouraged to keep the patch size down. |
| |
| Since each patch is well defined, and since each change has been tested |
| and shows no regressions, the patches are considered @emph{fairly} |
| obvious. Such patches, when submitted by developers listed in the |
| @file{MAINTAINERS} file, do not need approval. Occasional steps in the |
| process may be more complicated and less clear. The developer is |
| expected to use their judgment and is encouraged to seek advice as |
| needed. |
| |
| @subsection Preparation |
| |
| The first step is to establish control. Build (with @option{-Werror} |
| enabled) and test the target so that there is a baseline against which |
| the debugger can be compared. |
| |
| At no stage can the test results regress or @value{GDBN} stop compiling |
| with @option{-Werror}. |
| |
| @subsection Add the multi-arch initialization code |
| |
| The objective of this step is to establish the basic multi-arch |
| framework. It involves |
| |
| @itemize @bullet |
| |
| @item |
| The addition of a @code{@var{arch}_gdbarch_init} function@footnote{The |
| above is from the original example and uses K&R C. @value{GDBN} |
| has since converted to ISO C but lets ignore that.} that creates |
| the architecture: |
| @smallexample |
| static struct gdbarch * |
| d10v_gdbarch_init (info, arches) |
| struct gdbarch_info info; |
| struct gdbarch_list *arches; |
| @{ |
| struct gdbarch *gdbarch; |
| /* there is only one d10v architecture */ |
| if (arches != NULL) |
| return arches->gdbarch; |
| gdbarch = gdbarch_alloc (&info, NULL); |
| return gdbarch; |
| @} |
| @end smallexample |
| @noindent |
| @emph{} |
| |
| @item |
| A per-architecture dump function to print any architecture specific |
| information: |
| @smallexample |
| static void |
| mips_dump_tdep (struct gdbarch *current_gdbarch, |
| struct ui_file *file) |
| @{ |
| @dots{} code to print architecture specific info @dots{} |
| @} |
| @end smallexample |
| |
| @item |
| A change to @code{_initialize_@var{arch}_tdep} to register this new |
| architecture: |
| @smallexample |
| void |
| _initialize_mips_tdep (void) |
| @{ |
| gdbarch_register (bfd_arch_mips, mips_gdbarch_init, |
| mips_dump_tdep); |
| @end smallexample |
| |
| @item |
| Add the macro @code{GDB_MULTI_ARCH}, defined as 0 (zero), to the file@* |
| @file{config/@var{arch}/tm-@var{arch}.h}. |
| |
| @end itemize |
| |
| @subsection Update multi-arch incompatible mechanisms |
| |
| Some mechanisms do not work with multi-arch. They include: |
| |
| @table @code |
| @item FRAME_FIND_SAVED_REGS |
| Replaced with @code{DEPRECATED_FRAME_INIT_SAVED_REGS} |
| @end table |
| |
| @noindent |
| At this stage you could also consider converting the macros into |
| functions. |
| |
| @subsection Prepare for multi-arch level to one |
| |
| Temporally set @code{GDB_MULTI_ARCH} to @code{GDB_MULTI_ARCH_PARTIAL} |
| and then build and start @value{GDBN} (the change should not be |
| committed). @value{GDBN} may not build, and once built, it may die with |
| an internal error listing the architecture methods that must be |
| provided. |
| |
| Fix any build problems (patch(es)). |
| |
| Convert all the architecture methods listed, which are only macros, into |
| functions (patch(es)). |
| |
| Update @code{@var{arch}_gdbarch_init} to set all the missing |
| architecture methods and wrap the corresponding macros in @code{#if |
| !GDB_MULTI_ARCH} (patch(es)). |
| |
| @subsection Set multi-arch level one |
| |
| Change the value of @code{GDB_MULTI_ARCH} to GDB_MULTI_ARCH_PARTIAL (a |
| single patch). |
| |
| Any problems with throwing ``the switch'' should have been fixed |
| already. |
| |
| @subsection Convert remaining macros |
| |
| Suggest converting macros into functions (and setting the corresponding |
| architecture method) in small batches. |
| |
| @subsection Set multi-arch level to two |
| |
| This should go smoothly. |
| |
| @subsection Delete the TM file |
| |
| The @file{tm-@var{arch}.h} can be deleted. @file{@var{arch}.mt} and |
| @file{configure.in} updated. |
| |
| |
| @node Target Vector Definition |
| |
| @chapter Target Vector Definition |
| @cindex target vector |
| |
| The target vector defines the interface between @value{GDBN}'s |
| abstract handling of target systems, and the nitty-gritty code that |
| actually exercises control over a process or a serial port. |
| @value{GDBN} includes some 30-40 different target vectors; however, |
| each configuration of @value{GDBN} includes only a few of them. |
| |
| @section File Targets |
| |
| Both executables and core files have target vectors. |
| |
| @section Standard Protocol and Remote Stubs |
| |
| @value{GDBN}'s file @file{remote.c} talks a serial protocol to code |
| that runs in the target system. @value{GDBN} provides several sample |
| @dfn{stubs} that can be integrated into target programs or operating |
| systems for this purpose; they are named @file{*-stub.c}. |
| |
| The @value{GDBN} user's manual describes how to put such a stub into |
| your target code. What follows is a discussion of integrating the |
| SPARC stub into a complicated operating system (rather than a simple |
| program), by Stu Grossman, the author of this stub. |
| |
| The trap handling code in the stub assumes the following upon entry to |
| @code{trap_low}: |
| |
| @enumerate |
| @item |
| %l1 and %l2 contain pc and npc respectively at the time of the trap; |
| |
| @item |
| traps are disabled; |
| |
| @item |
| you are in the correct trap window. |
| @end enumerate |
| |
| As long as your trap handler can guarantee those conditions, then there |
| is no reason why you shouldn't be able to ``share'' traps with the stub. |
| The stub has no requirement that it be jumped to directly from the |
| hardware trap vector. That is why it calls @code{exceptionHandler()}, |
| which is provided by the external environment. For instance, this could |
| set up the hardware traps to actually execute code which calls the stub |
| first, and then transfers to its own trap handler. |
| |
| For the most point, there probably won't be much of an issue with |
| ``sharing'' traps, as the traps we use are usually not used by the kernel, |
| and often indicate unrecoverable error conditions. Anyway, this is all |
| controlled by a table, and is trivial to modify. The most important |
| trap for us is for @code{ta 1}. Without that, we can't single step or |
| do breakpoints. Everything else is unnecessary for the proper operation |
| of the debugger/stub. |
| |
| From reading the stub, it's probably not obvious how breakpoints work. |
| They are simply done by deposit/examine operations from @value{GDBN}. |
| |
| @section ROM Monitor Interface |
| |
| @section Custom Protocols |
| |
| @section Transport Layer |
| |
| @section Builtin Simulator |
| |
| |
| @node Native Debugging |
| |
| @chapter Native Debugging |
| @cindex native debugging |
| |
| Several files control @value{GDBN}'s configuration for native support: |
| |
| @table @file |
| @vindex NATDEPFILES |
| @item gdb/config/@var{arch}/@var{xyz}.mh |
| Specifies Makefile fragments needed by a @emph{native} configuration on |
| machine @var{xyz}. In particular, this lists the required |
| native-dependent object files, by defining @samp{NATDEPFILES=@dots{}}. |
| Also specifies the header file which describes native support on |
| @var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}. You can also |
| define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS}, |
| @samp{NAT_CDEPS}, etc.; see @file{Makefile.in}. |
| |
| @emph{Maintainer's note: The @file{.mh} suffix is because this file |
| originally contained @file{Makefile} fragments for hosting @value{GDBN} |
| on machine @var{xyz}. While the file is no longer used for this |
| purpose, the @file{.mh} suffix remains. Perhaps someone will |
| eventually rename these fragments so that they have a @file{.mn} |
| suffix.} |
| |
| @item gdb/config/@var{arch}/nm-@var{xyz}.h |
| (@file{nm.h} is a link to this file, created by @code{configure}). Contains C |
| macro definitions describing the native system environment, such as |
| child process control and core file support. |
| |
| @item gdb/@var{xyz}-nat.c |
| Contains any miscellaneous C code required for this native support of |
| this machine. On some machines it doesn't exist at all. |
| @end table |
| |
| There are some ``generic'' versions of routines that can be used by |
| various systems. These can be customized in various ways by macros |
| defined in your @file{nm-@var{xyz}.h} file. If these routines work for |
| the @var{xyz} host, you can just include the generic file's name (with |
| @samp{.o}, not @samp{.c}) in @code{NATDEPFILES}. |
| |
| Otherwise, if your machine needs custom support routines, you will need |
| to write routines that perform the same functions as the generic file. |
| Put them into @file{@var{xyz}-nat.c}, and put @file{@var{xyz}-nat.o} |
| into @code{NATDEPFILES}. |
| |
| @table @file |
| @item inftarg.c |
| This contains the @emph{target_ops vector} that supports Unix child |
| processes on systems which use ptrace and wait to control the child. |
| |
| @item procfs.c |
| This contains the @emph{target_ops vector} that supports Unix child |
| processes on systems which use /proc to control the child. |
| |
| @item fork-child.c |
| This does the low-level grunge that uses Unix system calls to do a ``fork |
| and exec'' to start up a child process. |
| |
| @item infptrace.c |
| This is the low level interface to inferior processes for systems using |
| the Unix @code{ptrace} call in a vanilla way. |
| @end table |
| |
| @section Native core file Support |
| @cindex native core files |
| |
| @table @file |
| @findex fetch_core_registers |
| @item core-aout.c::fetch_core_registers() |
| Support for reading registers out of a core file. This routine calls |
| @code{register_addr()}, see below. Now that BFD is used to read core |
| files, virtually all machines should use @code{core-aout.c}, and should |
| just provide @code{fetch_core_registers} in @code{@var{xyz}-nat.c} (or |
| @code{REGISTER_U_ADDR} in @code{nm-@var{xyz}.h}). |
| |
| @item core-aout.c::register_addr() |
| If your @code{nm-@var{xyz}.h} file defines the macro |
| @code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to |
| set @code{addr} to the offset within the @samp{user} struct of @value{GDBN} |
| register number @code{regno}. @code{blockend} is the offset within the |
| ``upage'' of @code{u.u_ar0}. If @code{REGISTER_U_ADDR} is defined, |
| @file{core-aout.c} will define the @code{register_addr()} function and |
| use the macro in it. If you do not define @code{REGISTER_U_ADDR}, but |
| you are using the standard @code{fetch_core_registers()}, you will need |
| to define your own version of @code{register_addr()}, put it into your |
| @code{@var{xyz}-nat.c} file, and be sure @code{@var{xyz}-nat.o} is in |
| the @code{NATDEPFILES} list. If you have your own |
| @code{fetch_core_registers()}, you may not need a separate |
| @code{register_addr()}. Many custom @code{fetch_core_registers()} |
| implementations simply locate the registers themselves.@refill |
| @end table |
| |
| When making @value{GDBN} run native on a new operating system, to make it |
| possible to debug core files, you will need to either write specific |
| code for parsing your OS's core files, or customize |
| @file{bfd/trad-core.c}. First, use whatever @code{#include} files your |
| machine uses to define the struct of registers that is accessible |
| (possibly in the u-area) in a core file (rather than |
| @file{machine/reg.h}), and an include file that defines whatever header |
| exists on a core file (e.g. the u-area or a @code{struct core}). Then |
| modify @code{trad_unix_core_file_p} to use these values to set up the |
| section information for the data segment, stack segment, any other |
| segments in the core file (perhaps shared library contents or control |
| information), ``registers'' segment, and if there are two discontiguous |
| sets of registers (e.g. integer and float), the ``reg2'' segment. This |
| section information basically delimits areas in the core file in a |
| standard way, which the section-reading routines in BFD know how to seek |
| around in. |
| |
| Then back in @value{GDBN}, you need a matching routine called |
| @code{fetch_core_registers}. If you can use the generic one, it's in |
| @file{core-aout.c}; if not, it's in your @file{@var{xyz}-nat.c} file. |
| It will be passed a char pointer to the entire ``registers'' segment, |
| its length, and a zero; or a char pointer to the entire ``regs2'' |
| segment, its length, and a 2. The routine should suck out the supplied |
| register values and install them into @value{GDBN}'s ``registers'' array. |
| |
| If your system uses @file{/proc} to control processes, and uses ELF |
| format core files, then you may be able to use the same routines for |
| reading the registers out of processes and out of core files. |
| |
| @section ptrace |
| |
| @section /proc |
| |
| @section win32 |
| |
| @section shared libraries |
| |
| @section Native Conditionals |
| @cindex native conditionals |
| |
| When @value{GDBN} is configured and compiled, various macros are |
| defined or left undefined, to control compilation when the host and |
| target systems are the same. These macros should be defined (or left |
| undefined) in @file{nm-@var{system}.h}. |
| |
| @table @code |
| @item ATTACH_DETACH |
| @findex ATTACH_DETACH |
| If defined, then @value{GDBN} will include support for the @code{attach} and |
| @code{detach} commands. |
| |
| @item CHILD_PREPARE_TO_STORE |
| @findex CHILD_PREPARE_TO_STORE |
| If the machine stores all registers at once in the child process, then |
| define this to ensure that all values are correct. This usually entails |
| a read from the child. |
| |
| [Note that this is incorrectly defined in @file{xm-@var{system}.h} files |
| currently.] |
| |
| @item FETCH_INFERIOR_REGISTERS |
| @findex FETCH_INFERIOR_REGISTERS |
| Define this if the native-dependent code will provide its own routines |
| @code{fetch_inferior_registers} and @code{store_inferior_registers} in |
| @file{@var{host}-nat.c}. If this symbol is @emph{not} defined, and |
| @file{infptrace.c} is included in this configuration, the default |
| routines in @file{infptrace.c} are used for these functions. |
| |
| @item FILES_INFO_HOOK |
| @findex FILES_INFO_HOOK |
| (Only defined for Convex.) |
| |
| @item FP0_REGNUM |
| @findex FP0_REGNUM |
| This macro is normally defined to be the number of the first floating |
| point register, if the machine has such registers. As such, it would |
| appear only in target-specific code. However, @file{/proc} support uses this |
| to decide whether floats are in use on this target. |
| |
| @item GET_LONGJMP_TARGET |
| @findex GET_LONGJMP_TARGET |
| For most machines, this is a target-dependent parameter. On the |
| DECstation and the Iris, this is a native-dependent parameter, since |
| @file{setjmp.h} is needed to define it. |
| |
| This macro determines the target PC address that @code{longjmp} will jump to, |
| assuming that we have just stopped at a longjmp breakpoint. It takes a |
| @code{CORE_ADDR *} as argument, and stores the target PC value through this |
| pointer. It examines the current state of the machine as needed. |
| |
| @item I386_USE_GENERIC_WATCHPOINTS |
| An x86-based machine can define this to use the generic x86 watchpoint |
| support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}. |
| |
| @item KERNEL_U_ADDR |
| @findex KERNEL_U_ADDR |
| Define this to the address of the @code{u} structure (the ``user |
| struct'', also known as the ``u-page'') in kernel virtual memory. @value{GDBN} |
| needs to know this so that it can subtract this address from absolute |
| addresses in the upage, that are obtained via ptrace or from core files. |
| On systems that don't need this value, set it to zero. |
| |
| @item KERNEL_U_ADDR_BSD |
| @findex KERNEL_U_ADDR_BSD |
| Define this to cause @value{GDBN} to determine the address of @code{u} at |
| runtime, by using Berkeley-style @code{nlist} on the kernel's image in |
| the root directory. |
| |
| @item KERNEL_U_ADDR_HPUX |
| @findex KERNEL_U_ADDR_HPUX |
| Define this to cause @value{GDBN} to determine the address of @code{u} at |
| runtime, by using HP-style @code{nlist} on the kernel's image in the |
| root directory. |
| |
| @item ONE_PROCESS_WRITETEXT |
| @findex ONE_PROCESS_WRITETEXT |
| Define this to be able to, when a breakpoint insertion fails, warn the |
| user that another process may be running with the same executable. |
| |
| @item PREPARE_TO_PROCEED (@var{select_it}) |
| @findex PREPARE_TO_PROCEED |
| This (ugly) macro allows a native configuration to customize the way the |
| @code{proceed} function in @file{infrun.c} deals with switching between |
| threads. |
| |
| In a multi-threaded task we may select another thread and then continue |
| or step. But if the old thread was stopped at a breakpoint, it will |
| immediately cause another breakpoint stop without any execution (i.e. it |
| will report a breakpoint hit incorrectly). So @value{GDBN} must step over it |
| first. |
| |
| If defined, @code{PREPARE_TO_PROCEED} should check the current thread |
| against the thread that reported the most recent event. If a step-over |
| is required, it returns TRUE. If @var{select_it} is non-zero, it should |
| reselect the old thread. |
| |
| @item PROC_NAME_FMT |
| @findex PROC_NAME_FMT |
| Defines the format for the name of a @file{/proc} device. Should be |
| defined in @file{nm.h} @emph{only} in order to override the default |
| definition in @file{procfs.c}. |
| |
| @item PTRACE_FP_BUG |
| @findex PTRACE_FP_BUG |
| See @file{mach386-xdep.c}. |
| |
| @item PTRACE_ARG3_TYPE |
| @findex PTRACE_ARG3_TYPE |
| The type of the third argument to the @code{ptrace} system call, if it |
| exists and is different from @code{int}. |
| |
| @item REGISTER_U_ADDR |
| @findex REGISTER_U_ADDR |
| Defines the offset of the registers in the ``u area''. |
| |
| @item SHELL_COMMAND_CONCAT |
| @findex SHELL_COMMAND_CONCAT |
| If defined, is a string to prefix on the shell command used to start the |
| inferior. |
| |
| @item SHELL_FILE |
| @findex SHELL_FILE |
| If defined, this is the name of the shell to use to run the inferior. |
| Defaults to @code{"/bin/sh"}. |
| |
| @item SOLIB_ADD (@var{filename}, @var{from_tty}, @var{targ}, @var{readsyms}) |
| @findex SOLIB_ADD |
| Define this to expand into an expression that will cause the symbols in |
| @var{filename} to be added to @value{GDBN}'s symbol table. If |
| @var{readsyms} is zero symbols are not read but any necessary low level |
| processing for @var{filename} is still done. |
| |
| @item SOLIB_CREATE_INFERIOR_HOOK |
| @findex SOLIB_CREATE_INFERIOR_HOOK |
| Define this to expand into any shared-library-relocation code that you |
| want to be run just after the child process has been forked. |
| |
| @item START_INFERIOR_TRAPS_EXPECTED |
| @findex START_INFERIOR_TRAPS_EXPECTED |
| When starting an inferior, @value{GDBN} normally expects to trap |
| twice; once when |
| the shell execs, and once when the program itself execs. If the actual |
| number of traps is something other than 2, then define this macro to |
| expand into the number expected. |
| |
| @item SVR4_SHARED_LIBS |
| @findex SVR4_SHARED_LIBS |
| Define this to indicate that SVR4-style shared libraries are in use. |
| |
| @item USE_PROC_FS |
| @findex USE_PROC_FS |
| This determines whether small routines in @file{*-tdep.c}, which |
| translate register values between @value{GDBN}'s internal |
| representation and the @file{/proc} representation, are compiled. |
| |
| @item U_REGS_OFFSET |
| @findex U_REGS_OFFSET |
| This is the offset of the registers in the upage. It need only be |
| defined if the generic ptrace register access routines in |
| @file{infptrace.c} are being used (that is, @file{infptrace.c} is |
| configured in, and @code{FETCH_INFERIOR_REGISTERS} is not defined). If |
| the default value from @file{infptrace.c} is good enough, leave it |
| undefined. |
| |
| The default value means that u.u_ar0 @emph{points to} the location of |
| the registers. I'm guessing that @code{#define U_REGS_OFFSET 0} means |
| that @code{u.u_ar0} @emph{is} the location of the registers. |
| |
| @item CLEAR_SOLIB |
| @findex CLEAR_SOLIB |
| See @file{objfiles.c}. |
| |
| @item DEBUG_PTRACE |
| @findex DEBUG_PTRACE |
| Define this to debug @code{ptrace} calls. |
| @end table |
| |
| |
| @node Support Libraries |
| |
| @chapter Support Libraries |
| |
| @section BFD |
| @cindex BFD library |
| |
| BFD provides support for @value{GDBN} in several ways: |
| |
| @table @emph |
| @item identifying executable and core files |
| BFD will identify a variety of file types, including a.out, coff, and |
| several variants thereof, as well as several kinds of core files. |
| |
| @item access to sections of files |
| BFD parses the file headers to determine the names, virtual addresses, |
| sizes, and file locations of all the various named sections in files |
| (such as the text section or the data section). @value{GDBN} simply |
| calls BFD to read or write section @var{x} at byte offset @var{y} for |
| length @var{z}. |
| |
| @item specialized core file support |
| BFD provides routines to determine the failing command name stored in a |
| core file, the signal with which the program failed, and whether a core |
| file matches (i.e.@: could be a core dump of) a particular executable |
| file. |
| |
| @item locating the symbol information |
| @value{GDBN} uses an internal interface of BFD to determine where to find the |
| symbol information in an executable file or symbol-file. @value{GDBN} itself |
| handles the reading of symbols, since BFD does not ``understand'' debug |
| symbols, but @value{GDBN} uses BFD's cached information to find the symbols, |
| string table, etc. |
| @end table |
| |
| @section opcodes |
| @cindex opcodes library |
| |
| The opcodes library provides @value{GDBN}'s disassembler. (It's a separate |
| library because it's also used in binutils, for @file{objdump}). |
| |
| @section readline |
| |
| @section mmalloc |
| |
| @section libiberty |
| |
| @section gnu-regex |
| @cindex regular expressions library |
| |
| Regex conditionals. |
| |
| @table @code |
| @item C_ALLOCA |
| |
| @item NFAILURES |
| |
| @item RE_NREGS |
| |
| @item SIGN_EXTEND_CHAR |
| |
| @item SWITCH_ENUM_BUG |
| |
| @item SYNTAX_TABLE |
| |
| @item Sword |
| |
| @item sparc |
| @end table |
| |
| @section include |
| |
| @node Coding |
| |
| @chapter Coding |
| |
| This chapter covers topics that are lower-level than the major |
| algorithms of @value{GDBN}. |
| |
| @section Cleanups |
| @cindex cleanups |
| |
| Cleanups are a structured way to deal with things that need to be done |
| later. |
| |
| When your code does something (e.g., @code{xmalloc} some memory, or |
| @code{open} a file) that needs to be undone later (e.g., @code{xfree} |
| the memory or @code{close} the file), it can make a cleanup. The |
| cleanup will be done at some future point: when the command is finished |
| and control returns to the top level; when an error occurs and the stack |
| is unwound; or when your code decides it's time to explicitly perform |
| cleanups. Alternatively you can elect to discard the cleanups you |
| created. |
| |
| Syntax: |
| |
| @table @code |
| @item struct cleanup *@var{old_chain}; |
| Declare a variable which will hold a cleanup chain handle. |
| |
| @findex make_cleanup |
| @item @var{old_chain} = make_cleanup (@var{function}, @var{arg}); |
| Make a cleanup which will cause @var{function} to be called with |
| @var{arg} (a @code{char *}) later. The result, @var{old_chain}, is a |
| handle that can later be passed to @code{do_cleanups} or |
| @code{discard_cleanups}. Unless you are going to call |
| @code{do_cleanups} or @code{discard_cleanups}, you can ignore the result |
| from @code{make_cleanup}. |
| |
| @findex do_cleanups |
| @item do_cleanups (@var{old_chain}); |
| Do all cleanups added to the chain since the corresponding |
| @code{make_cleanup} call was made. |
| |
| @findex discard_cleanups |
| @item discard_cleanups (@var{old_chain}); |
| Same as @code{do_cleanups} except that it just removes the cleanups from |
| the chain and does not call the specified functions. |
| @end table |
| |
| Cleanups are implemented as a chain. The handle returned by |
| @code{make_cleanups} includes the cleanup passed to the call and any |
| later cleanups appended to the chain (but not yet discarded or |
| performed). E.g.: |
| |
| @smallexample |
| make_cleanup (a, 0); |
| @{ |
| struct cleanup *old = make_cleanup (b, 0); |
| make_cleanup (c, 0) |
| ... |
| do_cleanups (old); |
| @} |
| @end smallexample |
| |
| @noindent |
| will call @code{c()} and @code{b()} but will not call @code{a()}. The |
| cleanup that calls @code{a()} will remain in the cleanup chain, and will |
| be done later unless otherwise discarded.@refill |
| |
| Your function should explicitly do or discard the cleanups it creates. |
| Failing to do this leads to non-deterministic behavior since the caller |
| will arbitrarily do or discard your functions cleanups. This need leads |
| to two common cleanup styles. |
| |
| The first style is try/finally. Before it exits, your code-block calls |
| @code{do_cleanups} with the old cleanup chain and thus ensures that your |
| code-block's cleanups are always performed. For instance, the following |
| code-segment avoids a memory leak problem (even when @code{error} is |
| called and a forced stack unwind occurs) by ensuring that the |
| @code{xfree} will always be called: |
| |
| @smallexample |
| struct cleanup *old = make_cleanup (null_cleanup, 0); |
| data = xmalloc (sizeof blah); |
| make_cleanup (xfree, data); |
| ... blah blah ... |
| do_cleanups (old); |
| @end smallexample |
| |
| The second style is try/except. Before it exits, your code-block calls |
| @code{discard_cleanups} with the old cleanup chain and thus ensures that |
| any created cleanups are not performed. For instance, the following |
| code segment, ensures that the file will be closed but only if there is |
| an error: |
| |
| @smallexample |
| FILE *file = fopen ("afile", "r"); |
| struct cleanup *old = make_cleanup (close_file, file); |
| ... blah blah ... |
| discard_cleanups (old); |
| return file; |
| @end smallexample |
| |
| Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify |
| that they ``should not be called when cleanups are not in place''. This |
| means that any actions you need to reverse in the case of an error or |
| interruption must be on the cleanup chain before you call these |
| functions, since they might never return to your code (they |
| @samp{longjmp} instead). |
| |
| @section Per-architecture module data |
| @cindex per-architecture module data |
| @cindex multi-arch data |
| @cindex data-pointer, per-architecture/per-module |
| |
| The multi-arch framework includes a mechanism for adding module specific |
| per-architecture data-pointers to the @code{struct gdbarch} architecture |
| object. |
| |
| A module registers one or more per-architecture data-pointers using the |
| function @code{register_gdbarch_data}: |
| |
| @deftypefun struct gdbarch_data *register_gdbarch_data (gdbarch_data_init_ftype *@var{init}, gdbarch_data_free_ftype *@var{free}) |
| |
| The @var{init} function is used to obtain an initial value for a |
| per-architecture data-pointer. The function is called, after the |
| architecture has been created, when the data-pointer is still |
| uninitialized (@code{NULL}) and its value has been requested via a call |
| to @code{gdbarch_data}. A data-pointer can also be initialize |
| explicitly using @code{set_gdbarch_data}. |
| |
| The @var{free} function is called when a data-pointer needs to be |
| destroyed. This occurs when either the corresponding @code{struct |
| gdbarch} object is being destroyed or when @code{set_gdbarch_data} is |
| overriding a non-@code{NULL} data-pointer value. |
| |
| The function @code{register_gdbarch_data} returns a @code{struct |
| gdbarch_data} that is used to identify the data-pointer that was added |
| to the module. |
| |
| @end deftypefun |
| |
| A typical module has @code{init} and @code{free} functions of the form: |
| |
| @smallexample |
| static struct gdbarch_data *nozel_handle; |
| static void * |
| nozel_init (struct gdbarch *gdbarch) |
| @{ |
| struct nozel *data = XMALLOC (struct nozel); |
| @dots{} |
| return data; |
| @} |
| @dots{} |
| static void |
| nozel_free (struct gdbarch *gdbarch, void *data) |
| @{ |
| xfree (data); |
| @} |
| @end smallexample |
| |
| Since uninitialized (@code{NULL}) data-pointers are initialized |
| on-demand, an @code{init} function is free to call other modules that |
| use data-pointers. Those modules data-pointers will be initialized as |
| needed. Care should be taken to ensure that the @code{init} call graph |
| does not contain cycles. |
| |
| The data-pointer is registered with the call: |
| |
| @smallexample |
| void |
| _initialize_nozel (void) |
| @{ |
| nozel_handle = register_gdbarch_data (nozel_init, nozel_free); |
| @dots{} |
| @end smallexample |
| |
| The per-architecture data-pointer is accessed using the function: |
| |
| @deftypefun void *gdbarch_data (struct gdbarch *@var{gdbarch}, struct gdbarch_data *@var{data_handle}) |
| Given the architecture @var{arch} and module data handle |
| @var{data_handle} (returned by @code{register_gdbarch_data}, this |
| function returns the current value of the per-architecture data-pointer. |
| @end deftypefun |
| |
| The non-@code{NULL} data-pointer returned by @code{gdbarch_data} should |
| be saved in a local variable and then used directly: |
| |
| @smallexample |
| int |
| nozel_total (struct gdbarch *gdbarch) |
| @{ |
| int total; |
| struct nozel *data = gdbarch_data (gdbarch, nozel_handle); |
| @dots{} |
| return total; |
| @} |
| @end smallexample |
| |
| It is also possible to directly initialize the data-pointer using: |
| |
| @deftypefun void set_gdbarch_data (struct gdbarch *@var{gdbarch}, struct gdbarch_data *handle, void *@var{pointer}) |
| Update the data-pointer corresponding to @var{handle} with the value of |
| @var{pointer}. If the previous data-pointer value is non-NULL, then it |
| is freed using data-pointers @var{free} function. |
| @end deftypefun |
| |
| This function is used by modules that require a mechanism for explicitly |
| setting the per-architecture data-pointer during architecture creation: |
| |
| @smallexample |
| /* Called during architecture creation. */ |
| extern void |
| set_gdbarch_nozel (struct gdbarch *gdbarch, |
| int total) |
| @{ |
| struct nozel *data = XMALLOC (struct nozel); |
| @dots{} |
| set_gdbarch_data (gdbarch, nozel_handle, nozel); |
| @} |
| @end smallexample |
| |
| @smallexample |
| /* Default, called when nozel not set by set_gdbarch_nozel(). */ |
| static void * |
| nozel_init (struct gdbarch *gdbarch) |
| @{ |
| struct nozel *default_nozel = XMALLOC (struc nozel); |
| @dots{} |
| return default_nozel; |
| @} |
| @end smallexample |
| |
| @smallexample |
| void |
| _initialize_nozel (void) |
| @{ |
| nozel_handle = register_gdbarch_data (nozel_init, NULL); |
| @dots{} |
| @end smallexample |
| |
| @noindent |
| Note that an @code{init} function still needs to be registered. It is |
| used to initialize the data-pointer when the architecture creation phase |
| fail to set an initial value. |
| |
| |
| @section Wrapping Output Lines |
| @cindex line wrap in output |
| |
| @findex wrap_here |
| Output that goes through @code{printf_filtered} or @code{fputs_filtered} |
| or @code{fputs_demangled} needs only to have calls to @code{wrap_here} |
| added in places that would be good breaking points. The utility |
| routines will take care of actually wrapping if the line width is |
| exceeded. |
| |
| The argument to @code{wrap_here} is an indentation string which is |
| printed @emph{only} if the line breaks there. This argument is saved |
| away and used later. It must remain valid until the next call to |
| @code{wrap_here} or until a newline has been printed through the |
| @code{*_filtered} functions. Don't pass in a local variable and then |
| return! |
| |
| It is usually best to call @code{wrap_here} after printing a comma or |
| space. If you call it before printing a space, make sure that your |
| indentation properly accounts for the leading space that will print if |
| the line wraps there. |
| |
| Any function or set of functions that produce filtered output must |
| finish by printing a newline, to flush the wrap buffer, before switching |
| to unfiltered (@code{printf}) output. Symbol reading routines that |
| print warnings are a good example. |
| |
| @section @value{GDBN} Coding Standards |
| @cindex coding standards |
| |
| @value{GDBN} follows the GNU coding standards, as described in |
| @file{etc/standards.texi}. This file is also available for anonymous |
| FTP from GNU archive sites. @value{GDBN} takes a strict interpretation |
| of the standard; in general, when the GNU standard recommends a practice |
| but does not require it, @value{GDBN} requires it. |
| |
| @value{GDBN} follows an additional set of coding standards specific to |
| @value{GDBN}, as described in the following sections. |
| |
| |
| @subsection ISO C |
| |
| @value{GDBN} assumes an ISO/IEC 9899:1990 (a.k.a.@: ISO C90) compliant |
| compiler. |
| |
| @value{GDBN} does not assume an ISO C or POSIX compliant C library. |
| |
| |
| @subsection Memory Management |
| |
| @value{GDBN} does not use the functions @code{malloc}, @code{realloc}, |
| @code{calloc}, @code{free} and @code{asprintf}. |
| |
| @value{GDBN} uses the functions @code{xmalloc}, @code{xrealloc} and |
| @code{xcalloc} when allocating memory. Unlike @code{malloc} et.al.@: |
| these functions do not return when the memory pool is empty. Instead, |
| they unwind the stack using cleanups. These functions return |
| @code{NULL} when requested to allocate a chunk of memory of size zero. |
| |
| @emph{Pragmatics: By using these functions, the need to check every |
| memory allocation is removed. These functions provide portable |
| behavior.} |
| |
| @value{GDBN} does not use the function @code{free}. |
| |
| @value{GDBN} uses the function @code{xfree} to return memory to the |
| memory pool. Consistent with ISO-C, this function ignores a request to |
| free a @code{NULL} pointer. |
| |
| @emph{Pragmatics: On some systems @code{free} fails when passed a |
| @code{NULL} pointer.} |
| |
| @value{GDBN} can use the non-portable function @code{alloca} for the |
| allocation of small temporary values (such as strings). |
| |
| @emph{Pragmatics: This function is very non-portable. Some systems |
| restrict the memory being allocated to no more than a few kilobytes.} |
| |
| @value{GDBN} uses the string function @code{xstrdup} and the print |
| function @code{xasprintf}. |
| |
| @emph{Pragmatics: @code{asprintf} and @code{strdup} can fail. Print |
| functions such as @code{sprintf} are very prone to buffer overflow |
| errors.} |
| |
| |
| @subsection Compiler Warnings |
| @cindex compiler warnings |
| |
| With few exceptions, developers should include the configuration option |
| @samp{--enable-gdb-build-warnings=,-Werror} when building @value{GDBN}. |
| The exceptions are listed in the file @file{gdb/MAINTAINERS}. |
| |
| This option causes @value{GDBN} (when built using GCC) to be compiled |
| with a carefully selected list of compiler warning flags. Any warnings |
| from those flags being treated as errors. |
| |
| The current list of warning flags includes: |
| |
| @table @samp |
| @item -Wimplicit |
| Since @value{GDBN} coding standard requires all functions to be declared |
| using a prototype, the flag has the side effect of ensuring that |
| prototyped functions are always visible with out resorting to |
| @samp{-Wstrict-prototypes}. |
| |
| @item -Wreturn-type |
| Such code often appears to work except on instruction set architectures |
| that use register windows. |
| |
| @item -Wcomment |
| |
| @item -Wtrigraphs |
| |
| @item -Wformat |
| Since @value{GDBN} uses the @code{format printf} attribute on all |
| @code{printf} like functions this checks not just @code{printf} calls |
| but also calls to functions such as @code{fprintf_unfiltered}. |
| |
| @item -Wparentheses |
| This warning includes uses of the assignment operator within an |
| @code{if} statement. |
| |
| @item -Wpointer-arith |
| |
| @item -Wuninitialized |
| @end table |
| |
| @emph{Pragmatics: Due to the way that @value{GDBN} is implemented most |
| functions have unused parameters. Consequently the warning |
| @samp{-Wunused-parameter} is precluded from the list. The macro |
| @code{ATTRIBUTE_UNUSED} is not used as it leads to false negatives --- |
| it is not an error to have @code{ATTRIBUTE_UNUSED} on a parameter that |
| is being used. The options @samp{-Wall} and @samp{-Wunused} are also |
| precluded because they both include @samp{-Wunused-parameter}.} |
| |
| @emph{Pragmatics: @value{GDBN} has not simply accepted the warnings |
| enabled by @samp{-Wall -Werror -W...}. Instead it is selecting warnings |
| when and where their benefits can be demonstrated.} |
| |
| @subsection Formatting |
| |
| @cindex source code formatting |
| The standard GNU recommendations for formatting must be followed |
| strictly. |
| |
| A function declaration should not have its name in column zero. A |
| function definition should have its name in column zero. |
| |
| @smallexample |
| /* Declaration */ |
| static void foo (void); |
| /* Definition */ |
| void |
| foo (void) |
| @{ |
| @} |
| @end smallexample |
| |
| @emph{Pragmatics: This simplifies scripting. Function definitions can |
| be found using @samp{^function-name}.} |
| |
| There must be a space between a function or macro name and the opening |
| parenthesis of its argument list (except for macro definitions, as |
| required by C). There must not be a space after an open paren/bracket |
| or before a close paren/bracket. |
| |
| While additional whitespace is generally helpful for reading, do not use |
| more than one blank line to separate blocks, and avoid adding whitespace |
| after the end of a program line (as of 1/99, some 600 lines had |
| whitespace after the semicolon). Excess whitespace causes difficulties |
| for @code{diff} and @code{patch} utilities. |
| |
| Pointers are declared using the traditional K&R C style: |
| |
| @smallexample |
| void *foo; |
| @end smallexample |
| |
| @noindent |
| and not: |
| |
| @smallexample |
| void * foo; |
| void* foo; |
| @end smallexample |
| |
| @subsection Comments |
| |
| @cindex comment formatting |
| The standard GNU requirements on comments must be followed strictly. |
| |
| Block comments must appear in the following form, with no @code{/*}- or |
| @code{*/}-only lines, and no leading @code{*}: |
| |
| @smallexample |
| /* Wait for control to return from inferior to debugger. If inferior |
| gets a signal, we may decide to start it up again instead of |
| returning. That is why there is a loop in this function. When |
| this function actually returns it means the inferior should be left |
| stopped and @value{GDBN} should read more commands. */ |
| @end smallexample |
| |
| (Note that this format is encouraged by Emacs; tabbing for a multi-line |
| comment works correctly, and @kbd{M-q} fills the block consistently.) |
| |
| Put a blank line between the block comments preceding function or |
| variable definitions, and the definition itself. |
| |
| In general, put function-body comments on lines by themselves, rather |
| than trying to fit them into the 20 characters left at the end of a |
| line, since either the comment or the code will inevitably get longer |
| than will fit, and then somebody will have to move it anyhow. |
| |
| @subsection C Usage |
| |
| @cindex C data types |
| Code must not depend on the sizes of C data types, the format of the |
| host's floating point numbers, the alignment of anything, or the order |
| of evaluation of expressions. |
| |
| @cindex function usage |
| Use functions freely. There are only a handful of compute-bound areas |
| in @value{GDBN} that might be affected by the overhead of a function |
| call, mainly in symbol reading. Most of @value{GDBN}'s performance is |
| limited by the target interface (whether serial line or system call). |
| |
| However, use functions with moderation. A thousand one-line functions |
| are just as hard to understand as a single thousand-line function. |
| |
| @emph{Macros are bad, M'kay.} |
| (But if you have to use a macro, make sure that the macro arguments are |
| protected with parentheses.) |
| |
| @cindex types |
| |
| Declarations like @samp{struct foo *} should be used in preference to |
| declarations like @samp{typedef struct foo @{ @dots{} @} *foo_ptr}. |
| |
| |
| @subsection Function Prototypes |
| @cindex function prototypes |
| |
| Prototypes must be used when both @emph{declaring} and @emph{defining} |
| a function. Prototypes for @value{GDBN} functions must include both the |
| argument type and name, with the name matching that used in the actual |
| function definition. |
| |
| All external functions should have a declaration in a header file that |
| callers include, except for @code{_initialize_*} functions, which must |
| be external so that @file{init.c} construction works, but shouldn't be |
| visible to random source files. |
| |
| Where a source file needs a forward declaration of a static function, |
| that declaration must appear in a block near the top of the source file. |
| |
| |
| @subsection Internal Error Recovery |
| |
| During its execution, @value{GDBN} can encounter two types of errors. |
| User errors and internal errors. User errors include not only a user |
| entering an incorrect command but also problems arising from corrupt |
| object files and system errors when interacting with the target. |
| Internal errors include situations where @value{GDBN} has detected, at |
| run time, a corrupt or erroneous situation. |
| |
| When reporting an internal error, @value{GDBN} uses |
| @code{internal_error} and @code{gdb_assert}. |
| |
| @value{GDBN} must not call @code{abort} or @code{assert}. |
| |
| @emph{Pragmatics: There is no @code{internal_warning} function. Either |
| the code detected a user error, recovered from it and issued a |
| @code{warning} or the code failed to correctly recover from the user |
| error and issued an @code{internal_error}.} |
| |
| @subsection File Names |
| |
| Any file used when building the core of @value{GDBN} must be in lower |
| case. Any file used when building the core of @value{GDBN} must be 8.3 |
| unique. These requirements apply to both source and generated files. |
| |
| @emph{Pragmatics: The core of @value{GDBN} must be buildable on many |
| platforms including DJGPP and MacOS/HFS. Every time an unfriendly file |
| is introduced to the build process both @file{Makefile.in} and |
| @file{configure.in} need to be modified accordingly. Compare the |
| convoluted conversion process needed to transform @file{COPYING} into |
| @file{copying.c} with the conversion needed to transform |
| @file{version.in} into @file{version.c}.} |
| |
| Any file non 8.3 compliant file (that is not used when building the core |
| of @value{GDBN}) must be added to @file{gdb/config/djgpp/fnchange.lst}. |
| |
| @emph{Pragmatics: This is clearly a compromise.} |
| |
| When @value{GDBN} has a local version of a system header file (ex |
| @file{string.h}) the file name based on the POSIX header prefixed with |
| @file{gdb_} (@file{gdb_string.h}). |
| |
| For other files @samp{-} is used as the separator. |
| |
| |
| @subsection Include Files |
| |
| A @file{.c} file should include @file{defs.h} first. |
| |
| A @file{.c} file should directly include the @code{.h} file of every |
| declaration and/or definition it directly refers to. It cannot rely on |
| indirect inclusion. |
| |
| A @file{.h} file should directly include the @code{.h} file of every |
| declaration and/or definition it directly refers to. It cannot rely on |
| indirect inclusion. Exception: The file @file{defs.h} does not need to |
| be directly included. |
| |
| An external declaration should only appear in one include file. |
| |
| An external declaration should never appear in a @code{.c} file. |
| Exception: a declaration for the @code{_initialize} function that |
| pacifies @option{-Wmissing-declaration}. |
| |
| A @code{typedef} definition should only appear in one include file. |
| |
| An opaque @code{struct} declaration can appear in multiple @file{.h} |
| files. Where possible, a @file{.h} file should use an opaque |
| @code{struct} declaration instead of an include. |
| |
| All @file{.h} files should be wrapped in: |
| |
| @smallexample |
| #ifndef INCLUDE_FILE_NAME_H |
| #define INCLUDE_FILE_NAME_H |
| header body |
| #endif |
| @end smallexample |
| |
| |
| @subsection Clean Design and Portable Implementation |
| |
| @cindex design |
| In addition to getting the syntax right, there's the little question of |
| semantics. Some things are done in certain ways in @value{GDBN} because long |
| experience has shown that the more obvious ways caused various kinds of |
| trouble. |
| |
| @cindex assumptions about targets |
| You can't assume the byte order of anything that comes from a target |
| (including @var{value}s, object files, and instructions). Such things |
| must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in |
| @value{GDBN}, or one of the swap routines defined in @file{bfd.h}, |
| such as @code{bfd_get_32}. |
| |
| You can't assume that you know what interface is being used to talk to |
| the target system. All references to the target must go through the |
| current @code{target_ops} vector. |
| |
| You can't assume that the host and target machines are the same machine |
| (except in the ``native'' support modules). In particular, you can't |
| assume that the target machine's header files will be available on the |
| host machine. Target code must bring along its own header files -- |
| written from scratch or explicitly donated by their owner, to avoid |
| copyright problems. |
| |
| @cindex portability |
| Insertion of new @code{#ifdef}'s will be frowned upon. It's much better |
| to write the code portably than to conditionalize it for various |
| systems. |
| |
| @cindex system dependencies |
| New @code{#ifdef}'s which test for specific compilers or manufacturers |
| or operating systems are unacceptable. All @code{#ifdef}'s should test |
| for features. The information about which configurations contain which |
| features should be segregated into the configuration files. Experience |
| has proven far too often that a feature unique to one particular system |
| often creeps into other systems; and that a conditional based on some |
| predefined macro for your current system will become worthless over |
| time, as new versions of your system come out that behave differently |
| with regard to this feature. |
| |
| Adding code that handles specific architectures, operating systems, |
| target interfaces, or hosts, is not acceptable in generic code. |
| |
| @cindex portable file name handling |
| @cindex file names, portability |
| One particularly notorious area where system dependencies tend to |
| creep in is handling of file names. The mainline @value{GDBN} code |
| assumes Posix semantics of file names: absolute file names begin with |
| a forward slash @file{/}, slashes are used to separate leading |
| directories, case-sensitive file names. These assumptions are not |
| necessarily true on non-Posix systems such as MS-Windows. To avoid |
| system-dependent code where you need to take apart or construct a file |
| name, use the following portable macros: |
| |
| @table @code |
| @findex HAVE_DOS_BASED_FILE_SYSTEM |
| @item HAVE_DOS_BASED_FILE_SYSTEM |
| This preprocessing symbol is defined to a non-zero value on hosts |
| whose filesystems belong to the MS-DOS/MS-Windows family. Use this |
| symbol to write conditional code which should only be compiled for |
| such hosts. |
| |
| @findex IS_DIR_SEPARATOR |
| @item IS_DIR_SEPARATOR (@var{c}) |
| Evaluates to a non-zero value if @var{c} is a directory separator |
| character. On Unix and GNU/Linux systems, only a slash @file{/} is |
| such a character, but on Windows, both @file{/} and @file{\} will |
| pass. |
| |
| @findex IS_ABSOLUTE_PATH |
| @item IS_ABSOLUTE_PATH (@var{file}) |
| Evaluates to a non-zero value if @var{file} is an absolute file name. |
| For Unix and GNU/Linux hosts, a name which begins with a slash |
| @file{/} is absolute. On DOS and Windows, @file{d:/foo} and |
| @file{x:\bar} are also absolute file names. |
| |
| @findex FILENAME_CMP |
| @item FILENAME_CMP (@var{f1}, @var{f2}) |
| Calls a function which compares file names @var{f1} and @var{f2} as |
| appropriate for the underlying host filesystem. For Posix systems, |
| this simply calls @code{strcmp}; on case-insensitive filesystems it |
| will call @code{strcasecmp} instead. |
| |
| @findex DIRNAME_SEPARATOR |
| @item DIRNAME_SEPARATOR |
| Evaluates to a character which separates directories in |
| @code{PATH}-style lists, typically held in environment variables. |
| This character is @samp{:} on Unix, @samp{;} on DOS and Windows. |
| |
| @findex SLASH_STRING |
| @item SLASH_STRING |
| This evaluates to a constant string you should use to produce an |
| absolute filename from leading directories and the file's basename. |
| @code{SLASH_STRING} is @code{"/"} on most systems, but might be |
| @code{"\\"} for some Windows-based ports. |
| @end table |
| |
| In addition to using these macros, be sure to use portable library |
| functions whenever possible. For example, to extract a directory or a |
| basename part from a file name, use the @code{dirname} and |
| @code{basename} library functions (available in @code{libiberty} for |
| platforms which don't provide them), instead of searching for a slash |
| with @code{strrchr}. |
| |
| Another way to generalize @value{GDBN} along a particular interface is with an |
| attribute struct. For example, @value{GDBN} has been generalized to handle |
| multiple kinds of remote interfaces---not by @code{#ifdef}s everywhere, but |
| by defining the @code{target_ops} structure and having a current target (as |
| well as a stack of targets below it, for memory references). Whenever |
| something needs to be done that depends on which remote interface we are |
| using, a flag in the current target_ops structure is tested (e.g., |
| @code{target_has_stack}), or a function is called through a pointer in the |
| current target_ops structure. In this way, when a new remote interface |
| is added, only one module needs to be touched---the one that actually |
| implements the new remote interface. Other examples of |
| attribute-structs are BFD access to multiple kinds of object file |
| formats, or @value{GDBN}'s access to multiple source languages. |
| |
| Please avoid duplicating code. For example, in @value{GDBN} 3.x all |
| the code interfacing between @code{ptrace} and the rest of |
| @value{GDBN} was duplicated in @file{*-dep.c}, and so changing |
| something was very painful. In @value{GDBN} 4.x, these have all been |
| consolidated into @file{infptrace.c}. @file{infptrace.c} can deal |
| with variations between systems the same way any system-independent |
| file would (hooks, @code{#if defined}, etc.), and machines which are |
| radically different don't need to use @file{infptrace.c} at all. |
| |
| All debugging code must be controllable using the @samp{set debug |
| @var{module}} command. Do not use @code{printf} to print trace |
| messages. Use @code{fprintf_unfiltered(gdb_stdlog, ...}. Do not use |
| @code{#ifdef DEBUG}. |
| |
| |
| @node Porting GDB |
| |
| @chapter Porting @value{GDBN} |
| @cindex porting to new machines |
| |
| Most of the work in making @value{GDBN} compile on a new machine is in |
| specifying the configuration of the machine. This is done in a |
| dizzying variety of header files and configuration scripts, which we |
| hope to make more sensible soon. Let's say your new host is called an |
| @var{xyz} (e.g., @samp{sun4}), and its full three-part configuration |
| name is @code{@var{arch}-@var{xvend}-@var{xos}} (e.g., |
| @samp{sparc-sun-sunos4}). In particular: |
| |
| @itemize @bullet |
| @item |
| In the top level directory, edit @file{config.sub} and add @var{arch}, |
| @var{xvend}, and @var{xos} to the lists of supported architectures, |
| vendors, and operating systems near the bottom of the file. Also, add |
| @var{xyz} as an alias that maps to |
| @code{@var{arch}-@var{xvend}-@var{xos}}. You can test your changes by |
| running |
| |
| @smallexample |
| ./config.sub @var{xyz} |
| @end smallexample |
| |
| @noindent |
| and |
| |
| @smallexample |
| ./config.sub @code{@var{arch}-@var{xvend}-@var{xos}} |
| @end smallexample |
| |
| @noindent |
| which should both respond with @code{@var{arch}-@var{xvend}-@var{xos}} |
| and no error messages. |
| |
| @noindent |
| You need to port BFD, if that hasn't been done already. Porting BFD is |
| beyond the scope of this manual. |
| |
| @item |
| To configure @value{GDBN} itself, edit @file{gdb/configure.host} to recognize |
| your system and set @code{gdb_host} to @var{xyz}, and (unless your |
| desired target is already available) also edit @file{gdb/configure.tgt}, |
| setting @code{gdb_target} to something appropriate (for instance, |
| @var{xyz}). |
| |
| @emph{Maintainer's note: Work in progress. The file |
| @file{gdb/configure.host} originally needed to be modified when either a |
| new native target or a new host machine was being added to @value{GDBN}. |
| Recent changes have removed this requirement. The file now only needs |
| to be modified when adding a new native configuration. This will likely |
| changed again in the future.} |
| |
| @item |
| Finally, you'll need to specify and define @value{GDBN}'s host-, native-, and |
| target-dependent @file{.h} and @file{.c} files used for your |
| configuration. |
| @end itemize |
| |
| @node Releasing GDB |
| |
| @chapter Releasing @value{GDBN} |
| @cindex making a new release of gdb |
| |
| @section Versions and Branches |
| |
| @subsection Version Identifiers |
| |
| @value{GDBN}'s version is determined by the file @file{gdb/version.in}. |
| |
| @value{GDBN}'s mainline uses ISO dates to differentiate between |
| versions. The CVS repository uses @var{YYYY}-@var{MM}-@var{DD}-cvs |
| while the corresponding snapshot uses @var{YYYYMMDD}. |
| |
| @value{GDBN}'s release branch uses a slightly more complicated scheme. |
| When the branch is first cut, the mainline version identifier is |
| prefixed with the @var{major}.@var{minor} from of the previous release |
| series but with .90 appended. As draft releases are drawn from the |
| branch, the minor minor number (.90) is incremented. Once the first |
| release (@var{M}.@var{N}) has been made, the version prefix is updated |
| to @var{M}.@var{N}.0.90 (dot zero, dot ninety). Follow on releases have |
| an incremented minor minor version number (.0). |
| |
| Using 5.1 (previous) and 5.2 (current), the example below illustrates a |
| typical sequence of version identifiers: |
| |
| @table @asis |
| @item 5.1.1 |
| final release from previous branch |
| @item 2002-03-03-cvs |
| main-line the day the branch is cut |
| @item 5.1.90-2002-03-03-cvs |
| corresponding branch version |
| @item 5.1.91 |
| first draft release candidate |
| @item 5.1.91-2002-03-17-cvs |
| updated branch version |
| @item 5.1.92 |
| second draft release candidate |
| @item 5.1.92-2002-03-31-cvs |
| updated branch version |
| @item 5.1.93 |
| final release candidate (see below) |
| @item 5.2 |
| official release |
| @item 5.2.0.90-2002-04-07-cvs |
| updated CVS branch version |
| @item 5.2.1 |
| second official release |
| @end table |
| |
| Notes: |
| |
| @itemize @bullet |
| @item |
| Minor minor minor draft release candidates such as 5.2.0.91 have been |
| omitted from the example. Such release candidates are, typically, never |
| made. |
| @item |
| For 5.1.93 the bziped tar ball @file{gdb-5.1.93.tar.bz2} is just the |
| official @file{gdb-5.2.tar} renamed and compressed. |
| @end itemize |
| |
| To avoid version conflicts, vendors are expected to modify the file |
| @file{gdb/version.in} to include a vendor unique alphabetic identifier |
| (an official @value{GDBN} release never uses alphabetic characters in |
| its version identifer). |
| |
| Since @value{GDBN} does not make minor minor minor releases (e.g., |
| 5.1.0.1) the conflict between that and a minor minor draft release |
| identifier (e.g., 5.1.0.90) is avoided. |
| |
| |
| @subsection Branches |
| |
| @value{GDBN} draws a release series (5.2, 5.2.1, @dots{}) from a single |
| release branch (gdb_5_2-branch). Since minor minor minor releases |
| (5.1.0.1) are not made, the need to branch the release branch is avoided |
| (it also turns out that the effort required for such a a branch and |
| release is significantly greater than the effort needed to create a new |
| release from the head of the release branch). |
| |
| Releases 5.0 and 5.1 used branch and release tags of the form: |
| |
| @smallexample |
| gdb_N_M-YYYY-MM-DD-branchpoint |
| gdb_N_M-YYYY-MM-DD-branch |
| gdb_M_N-YYYY-MM-DD-release |
| @end smallexample |
| |
| Release 5.2 is trialing the branch and release tags: |
| |
| @smallexample |
| gdb_N_M-YYYY-MM-DD-branchpoint |
| gdb_N_M-branch |
| gdb_M_N-YYYY-MM-DD-release |
| @end smallexample |
| |
| @emph{Pragmatics: The branchpoint and release tags need to identify when |
| a branch and release are made. The branch tag, denoting the head of the |
| branch, does not have this criteria.} |
| |
| |
| @section Branch Commit Policy |
| |
| The branch commit policy is pretty slack. @value{GDBN} releases 5.0, |
| 5.1 and 5.2 all used the below: |
| |
| @itemize @bullet |
| @item |
| The @file{gdb/MAINTAINERS} file still holds. |
| @item |
| Don't fix something on the branch unless/until it is also fixed in the |
| trunk. If this isn't possible, mentioning it in the @file{gdb/PROBLEMS} |
| file is better than committing a hack. |
| @item |
| When considering a patch for the branch, suggested criteria include: |
| Does it fix a build? Does it fix the sequence @kbd{break main; run} |
| when debugging a static binary? |
| @item |
| The further a change is from the core of @value{GDBN}, the less likely |
| the change will worry anyone (e.g., target specific code). |
| @item |
| Only post a proposal to change the core of @value{GDBN} after you've |
| sent individual bribes to all the people listed in the |
| @file{MAINTAINERS} file @t{;-)} |
| @end itemize |
| |
| @emph{Pragmatics: Provided updates are restricted to non-core |
| functionality there is little chance that a broken change will be fatal. |
| This means that changes such as adding a new architectures or (within |
| reason) support for a new host are considered acceptable.} |
| |
| |
| @section Obsoleting code |
| |
| Before anything else, poke the other developers (and around the source |
| code) to see if there is anything that can be removed from @value{GDBN} |
| (an old target, an unused file). |
| |
| Obsolete code is identified by adding an @code{OBSOLETE} prefix to every |
| line. Doing this means that it is easy to identify something that has |
| been obsoleted when greping through the sources. |
| |
| The process is done in stages --- this is mainly to ensure that the |
| wider @value{GDBN} community has a reasonable opportunity to respond. |
| Remember, everything on the Internet takes a week. |
| |
| @enumerate |
| @item |
| Post the proposal on @email{gdb@@sources.redhat.com, the GDB mailing |
| list} Creating a bug report to track the task's state, is also highly |
| recommended. |
| @item |
| Wait a week or so. |
| @item |
| Post the proposal on @email{gdb-announce@@sources.redhat.com, the GDB |
| Announcement mailing list}. |
| @item |
| Wait a week or so. |
| @item |
| Go through and edit all relevant files and lines so that they are |
| prefixed with the word @code{OBSOLETE}. |
| @item |
| Wait until the next GDB version, containing this obsolete code, has been |
| released. |
| @item |
| Remove the obsolete code. |
| @end enumerate |
| |
| @noindent |
| @emph{Maintainer note: While removing old code is regrettable it is |
| hopefully better for @value{GDBN}'s long term development. Firstly it |
| helps the developers by removing code that is either no longer relevant |
| or simply wrong. Secondly since it removes any history associated with |
| the file (effectively clearing the slate) the developer has a much freer |
| hand when it comes to fixing broken files.} |
| |
| |
| |
| @section Before the Branch |
| |
| The most important objective at this stage is to find and fix simple |
| changes that become a pain to track once the branch is created. For |
| instance, configuration problems that stop @value{GDBN} from even |
| building. If you can't get the problem fixed, document it in the |
| @file{gdb/PROBLEMS} file. |
| |
| @subheading Prompt for @file{gdb/NEWS} |
| |
| People always forget. Send a post reminding them but also if you know |
| something interesting happened add it yourself. The @code{schedule} |
| script will mention this in its e-mail. |
| |
| @subheading Review @file{gdb/README} |
| |
| Grab one of the nightly snapshots and then walk through the |
| @file{gdb/README} looking for anything that can be improved. The |
| @code{schedule} script will mention this in its e-mail. |
| |
| @subheading Refresh any imported files. |
| |
| A number of files are taken from external repositories. They include: |
| |
| @itemize @bullet |
| @item |
| @file{texinfo/texinfo.tex} |
| @item |
| @file{config.guess} et.@: al.@: (see the top-level @file{MAINTAINERS} |
| file) |
| @item |
| @file{etc/standards.texi}, @file{etc/make-stds.texi} |
| @end itemize |
| |
| @subheading Check the ARI |
| |
| @uref{http://sources.redhat.com/gdb/ari,,A.R.I.} is an @code{awk} script |
| (Awk Regression Index ;-) that checks for a number of errors and coding |
| conventions. The checks include things like using @code{malloc} instead |
| of @code{xmalloc} and file naming problems. There shouldn't be any |
| regressions. |
| |
| @subsection Review the bug data base |
| |
| Close anything obviously fixed. |
| |
| @subsection Check all cross targets build |
| |
| The targets are listed in @file{gdb/MAINTAINERS}. |
| |
| |
| @section Cut the Branch |
| |
| @subheading Create the branch |
| |
| @smallexample |
| $ u=5.1 |
| $ v=5.2 |
| $ V=`echo $v | sed 's/\./_/g'` |
| $ D=`date -u +%Y-%m-%d` |
| $ echo $u $V $D |
| 5.1 5_2 2002-03-03 |
| $ echo cvs -f -d :ext:sources.redhat.com:/cvs/src rtag \ |
| -D $D-gmt gdb_$V-$D-branchpoint insight+dejagnu |
| cvs -f -d :ext:sources.redhat.com:/cvs/src rtag |
| -D 2002-03-03-gmt gdb_5_2-2002-03-03-branchpoint insight+dejagnu |
| $ ^echo ^^ |
| ... |
| $ echo cvs -f -d :ext:sources.redhat.com:/cvs/src rtag \ |
| -b -r gdb_$V-$D-branchpoint gdb_$V-branch insight+dejagnu |
| cvs -f -d :ext:sources.redhat.com:/cvs/src rtag \ |
| -b -r gdb_5_2-2002-03-03-branchpoint gdb_5_2-branch insight+dejagnu |
| $ ^echo ^^ |
| ... |
| $ |
| @end smallexample |
| |
| @itemize @bullet |
| @item |
| by using @kbd{-D YYYY-MM-DD-gmt} the branch is forced to an exact |
| date/time. |
| @item |
| the trunk is first taged so that the branch point can easily be found |
| @item |
| Insight (which includes GDB) and dejagnu are all tagged at the same time |
| @item |
| @file{version.in} gets bumped to avoid version number conflicts |
| @item |
| the reading of @file{.cvsrc} is disabled using @file{-f} |
| @end itemize |
| |
| @subheading Update @file{version.in} |
| |
| @smallexample |
| $ u=5.1 |
| $ v=5.2 |
| $ V=`echo $v | sed 's/\./_/g'` |
| $ echo $u $v$V |
| 5.1 5_2 |
| $ cd /tmp |
| $ echo cvs -f -d :ext:sources.redhat.com:/cvs/src co \ |
| -r gdb_$V-branch src/gdb/version.in |
| cvs -f -d :ext:sources.redhat.com:/cvs/src co |
| -r gdb_5_2-branch src/gdb/version.in |
| $ ^echo ^^ |
| U src/gdb/version.in |
| $ cd src/gdb |
| $ echo $u.90-0000-00-00-cvs > version.in |
| $ cat version.in |
| 5.1.90-0000-00-00-cvs |
| $ cvs -f commit version.in |
| @end smallexample |
| |
| @itemize @bullet |
| @item |
| @file{0000-00-00} is used as a date to pump prime the version.in update |
| mechanism |
| @item |
| @file{.90} and the previous branch version are used as fairly arbitrary |
| initial branch version number |
| @end itemize |
| |
| |
| @subheading Update the web and news pages |
| |
| Something? |
| |
| @subheading Tweak cron to track the new branch |
| |
| The file @file{gdbadmin/cron/crontab} contains gdbadmin's cron table. |
| This file needs to be updated so that: |
| |
| @itemize @bullet |
| @item |
| a daily timestamp is added to the file @file{version.in} |
| @item |
| the new branch is included in the snapshot process |
| @end itemize |
| |
| @noindent |
| See the file @file{gdbadmin/cron/README} for how to install the updated |
| cron table. |
| |
| The file @file{gdbadmin/ss/README} should also be reviewed to reflect |
| any changes. That file is copied to both the branch/ and current/ |
| snapshot directories. |
| |
| |
| @subheading Update the NEWS and README files |
| |
| The @file{NEWS} file needs to be updated so that on the branch it refers |
| to @emph{changes in the current release} while on the trunk it also |
| refers to @emph{changes since the current release}. |
| |
| The @file{README} file needs to be updated so that it refers to the |
| current release. |
| |
| @subheading Post the branch info |
| |
| Send an announcement to the mailing lists: |
| |
| @itemize @bullet |
| @item |
| @email{gdb-announce@@sources.redhat.com, GDB Announcement mailing list} |
| @item |
| @email{gdb@@sources.redhat.com, GDB Discsussion mailing list} and |
| @email{gdb-testers@@sources.redhat.com, GDB Discsussion mailing list} |
| @end itemize |
| |
| @emph{Pragmatics: The branch creation is sent to the announce list to |
| ensure that people people not subscribed to the higher volume discussion |
| list are alerted.} |
| |
| The announcement should include: |
| |
| @itemize @bullet |
| @item |
| the branch tag |
| @item |
| how to check out the branch using CVS |
| @item |
| the date/number of weeks until the release |
| @item |
| the branch commit policy |
| still holds. |
| @end itemize |
| |
| @section Stabilize the branch |
| |
| Something goes here. |
| |
| @section Create a Release |
| |
| The process of creating and then making available a release is broken |
| down into a number of stages. The first part addresses the technical |
| process of creating a releasable tar ball. The later stages address the |
| process of releasing that tar ball. |
| |
| When making a release candidate just the first section is needed. |
| |
| @subsection Create a release candidate |
| |
| The objective at this stage is to create a set of tar balls that can be |
| made available as a formal release (or as a less formal release |
| candidate). |
| |
| @subsubheading Freeze the branch |
| |
| Send out an e-mail notifying everyone that the branch is frozen to |
| @email{gdb-patches@@sources.redhat.com}. |
| |
| @subsubheading Establish a few defaults. |
| |
| @smallexample |
| $ b=gdb_5_2-branch |
| $ v=5.2 |
| $ t=/sourceware/snapshot-tmp/gdbadmin-tmp |
| $ echo $t/$b/$v |
| /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_2-branch/5.2 |
| $ mkdir -p $t/$b/$v |
| $ cd $t/$b/$v |
| $ pwd |
| /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_2-branch/5.2 |
| $ which autoconf |
| /home/gdbadmin/bin/autoconf |
| $ |
| @end smallexample |
| |
| @noindent |
| Notes: |
| |
| @itemize @bullet |
| @item |
| Check the @code{autoconf} version carefully. You want to be using the |
| version taken from the @file{binutils} snapshot directory, which can be |
| found at @uref{ftp://sources.redhat.com/pub/binutils/}. It is very |
| unlikely that a system installed version of @code{autoconf} (e.g., |
| @file{/usr/bin/autoconf}) is correct. |
| @end itemize |
| |
| @subsubheading Check out the relevant modules: |
| |
| @smallexample |
| $ for m in gdb insight dejagnu |
| do |
| ( mkdir -p $m && cd $m && cvs -q -f -d /cvs/src co -P -r $b $m ) |
| done |
| $ |
| @end smallexample |
| |
| @noindent |
| Note: |
| |
| @itemize @bullet |
| @item |
| The reading of @file{.cvsrc} is disabled (@file{-f}) so that there isn't |
| any confusion between what is written here and what your local |
| @code{cvs} really does. |
| @end itemize |
| |
| @subsubheading Update relevant files. |
| |
| @table @file |
| |
| @item gdb/NEWS |
| |
| Major releases get their comments added as part of the mainline. Minor |
| releases should probably mention any significant bugs that were fixed. |
| |
| Don't forget to include the @file{ChangeLog} entry. |
| |
| @smallexample |
| $ emacs gdb/src/gdb/NEWS |
| ... |
| c-x 4 a |
| ... |
| c-x c-s c-x c-c |
| $ cp gdb/src/gdb/NEWS insight/src/gdb/NEWS |
| $ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog |
| @end smallexample |
| |
| @item gdb/README |
| |
| You'll need to update: |
| |
| @itemize @bullet |
| @item |
| the version |
| @item |
| the update date |
| @item |
| who did it |
| @end itemize |
| |
| @smallexample |
| $ emacs gdb/src/gdb/README |
| ... |
| c-x 4 a |
| ... |
| c-x c-s c-x c-c |
| $ cp gdb/src/gdb/README insight/src/gdb/README |
| $ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog |
| @end smallexample |
| |
| @emph{Maintainer note: Hopefully the @file{README} file was reviewed |
| before the initial branch was cut so just a simple substitute is needed |
| to get it updated.} |
| |
| @emph{Maintainer note: Other projects generate @file{README} and |
| @file{INSTALL} from the core documentation. This might be worth |
| pursuing.} |
| |
| @item gdb/version.in |
| |
| @smallexample |
| $ echo $v > gdb/src/gdb/version.in |
| $ cat gdb/src/gdb/version.in |
| 5.2 |
| $ emacs gdb/src/gdb/version.in |
| ... |
| c-x 4 a |
| ... Bump to version ... |
| c-x c-s c-x c-c |
| $ cp gdb/src/gdb/version.in insight/src/gdb/version.in |
| $ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog |
| @end smallexample |
| |
| @item dejagnu/src/dejagnu/configure.in |
| |
| Dejagnu is more complicated. The version number is a parameter to |
| @code{AM_INIT_AUTOMAKE}. Tweak it to read something like gdb-5.1.91. |
| |
| Don't forget to re-generate @file{configure}. |
| |
| Don't forget to include a @file{ChangeLog} entry. |
| |
| @smallexample |
| $ emacs dejagnu/src/dejagnu/configure.in |
| ... |
| c-x 4 a |
| ... |
| c-x c-s c-x c-c |
| $ ( cd dejagnu/src/dejagnu && autoconf ) |
| @end smallexample |
| |
| @end table |
| |
| @subsubheading Do the dirty work |
| |
| This is identical to the process used to create the daily snapshot. |
| |
| @smallexample |
| $ for m in gdb insight |
| do |
| ( cd $m/src && gmake -f src-release $m.tar ) |
| done |
| $ ( m=dejagnu; cd $m/src && gmake -f src-release $m.tar.bz2 ) |
| @end smallexample |
| |
| If the top level source directory does not have @file{src-release} |
| (@value{GDBN} version 5.3.1 or earlier), try these commands instead: |
| |
| @smallexample |
| $ for m in gdb insight |
| do |
| ( cd $m/src && gmake -f Makefile.in $m.tar ) |
| done |
| $ ( m=dejagnu; cd $m/src && gmake -f Makefile.in $m.tar.bz2 ) |
| @end smallexample |
| |
| @subsubheading Check the source files |
| |
| You're looking for files that have mysteriously disappeared. |
| @kbd{distclean} has the habit of deleting files it shouldn't. Watch out |
| for the @file{version.in} update @kbd{cronjob}. |
| |
| @smallexample |
| $ ( cd gdb/src && cvs -f -q -n update ) |
| M djunpack.bat |
| ? gdb-5.1.91.tar |
| ? proto-toplev |
| @dots{} lots of generated files @dots{} |
| M gdb/ChangeLog |
| M gdb/NEWS |
| M gdb/README |
| M gdb/version.in |
| @dots{} lots of generated files @dots{} |
| $ |
| @end smallexample |
| |
| @noindent |
| @emph{Don't worry about the @file{gdb.info-??} or |
| @file{gdb/p-exp.tab.c}. They were generated (and yes @file{gdb.info-1} |
| was also generated only something strange with CVS means that they |
| didn't get supressed). Fixing it would be nice though.} |
| |
| @subsubheading Create compressed versions of the release |
| |
| @smallexample |
| $ cp */src/*.tar . |
| $ cp */src/*.bz2 . |
| $ ls -F |
| dejagnu/ dejagnu-gdb-5.2.tar.bz2 gdb/ gdb-5.2.tar insight/ insight-5.2.tar |
| $ for m in gdb insight |
| do |
| bzip2 -v -9 -c $m-$v.tar > $m-$v.tar.bz2 |
| gzip -v -9 -c $m-$v.tar > $m-$v.tar.gz |
| done |
| $ |
| @end smallexample |
| |
| @noindent |
| Note: |
| |
| @itemize @bullet |
| @item |
| A pipe such as @kbd{bunzip2 < xxx.bz2 | gzip -9 > xxx.gz} is not since, |
| in that mode, @code{gzip} does not know the name of the file and, hence, |
| can not include it in the compressed file. This is also why the release |
| process runs @code{tar} and @code{bzip2} as separate passes. |
| @end itemize |
| |
| @subsection Sanity check the tar ball |
| |
| Pick a popular machine (Solaris/PPC?) and try the build on that. |
| |
| @smallexample |
| $ bunzip2 < gdb-5.2.tar.bz2 | tar xpf - |
| $ cd gdb-5.2 |
| $ ./configure |
| $ make |
| @dots{} |
| $ ./gdb/gdb ./gdb/gdb |
| GNU gdb 5.2 |
| @dots{} |
| (gdb) b main |
| Breakpoint 1 at 0x80732bc: file main.c, line 734. |
| (gdb) run |
| Starting program: /tmp/gdb-5.2/gdb/gdb |
| |
| Breakpoint 1, main (argc=1, argv=0xbffff8b4) at main.c:734 |
| 734 catch_errors (captured_main, &args, "", RETURN_MASK_ALL); |
| (gdb) print args |
| $1 = @{argc = 136426532, argv = 0x821b7f0@} |
| (gdb) |
| @end smallexample |
| |
| @subsection Make a release candidate available |
| |
| If this is a release candidate then the only remaining steps are: |
| |
| @enumerate |
| @item |
| Commit @file{version.in} and @file{ChangeLog} |
| @item |
| Tweak @file{version.in} (and @file{ChangeLog} to read |
| @var{L}.@var{M}.@var{N}-0000-00-00-cvs so that the version update |
| process can restart. |
| @item |
| Make the release candidate available in |
| @uref{ftp://sources.redhat.com/pub/gdb/snapshots/branch} |
| @item |
| Notify the relevant mailing lists ( @email{gdb@@sources.redhat.com} and |
| @email{gdb-testers@@sources.redhat.com} that the candidate is available. |
| @end enumerate |
| |
| @subsection Make a formal release available |
| |
| (And you thought all that was required was to post an e-mail.) |
| |
| @subsubheading Install on sware |
| |
| Copy the new files to both the release and the old release directory: |
| |
| @smallexample |
| $ cp *.bz2 *.gz ~ftp/pub/gdb/old-releases/ |
| $ cp *.bz2 *.gz ~ftp/pub/gdb/releases |
| @end smallexample |
| |
| @noindent |
| Clean up the releases directory so that only the most recent releases |
| are available (e.g. keep 5.2 and 5.2.1 but remove 5.1): |
| |
| @smallexample |
| $ cd ~ftp/pub/gdb/releases |
| $ rm @dots{} |
| @end smallexample |
| |
| @noindent |
| Update the file @file{README} and @file{.message} in the releases |
| directory: |
| |
| @smallexample |
| $ vi README |
| @dots{} |
| $ rm -f .message |
| $ ln README .message |
| @end smallexample |
| |
| @subsubheading Update the web pages. |
| |
| @table @file |
| |
| @item htdocs/download/ANNOUNCEMENT |
| This file, which is posted as the official announcement, includes: |
| @itemize @bullet |
| @item |
| General announcement |
| @item |
| News. If making an @var{M}.@var{N}.1 release, retain the news from |
| earlier @var{M}.@var{N} release. |
| @item |
| Errata |
| @end itemize |
| |
| @item htdocs/index.html |
| @itemx htdocs/news/index.html |
| @itemx htdocs/download/index.html |
| These files include: |
| @itemize @bullet |
| @item |
| announcement of the most recent release |
| @item |
| news entry (remember to update both the top level and the news directory). |
| @end itemize |
| These pages also need to be regenerate using @code{index.sh}. |
| |
| @item download/onlinedocs/ |
| You need to find the magic command that is used to generate the online |
| docs from the @file{.tar.bz2}. The best way is to look in the output |
| from one of the nightly @code{cron} jobs and then just edit accordingly. |
| Something like: |
| |
| @smallexample |
| $ ~/ss/update-web-docs \ |
| ~ftp/pub/gdb/releases/gdb-5.2.tar.bz2 \ |
| $PWD/www \ |
| /www/sourceware/htdocs/gdb/download/onlinedocs \ |
| gdb |
| @end smallexample |
| |
| @item download/ari/ |
| Just like the online documentation. Something like: |
| |
| @smallexample |
| $ /bin/sh ~/ss/update-web-ari \ |
| ~ftp/pub/gdb/releases/gdb-5.2.tar.bz2 \ |
| $PWD/www \ |
| /www/sourceware/htdocs/gdb/download/ari \ |
| gdb |
| @end smallexample |
| |
| @end table |
| |
| @subsubheading Shadow the pages onto gnu |
| |
| Something goes here. |
| |
| |
| @subsubheading Install the @value{GDBN} tar ball on GNU |
| |
| At the time of writing, the GNU machine was @kbd{gnudist.gnu.org} in |
| @file{~ftp/gnu/gdb}. |
| |
| @subsubheading Make the @file{ANNOUNCEMENT} |
| |
| Post the @file{ANNOUNCEMENT} file you created above to: |
| |
| @itemize @bullet |
| @item |
| @email{gdb-announce@@sources.redhat.com, GDB Announcement mailing list} |
| @item |
| @email{info-gnu@@gnu.org, General GNU Announcement list} (but delay it a |
| day or so to let things get out) |
| @item |
| @email{bug-gdb@@gnu.org, GDB Bug Report mailing list} |
| @end itemize |
| |
| @subsection Cleanup |
| |
| The release is out but you're still not finished. |
| |
| @subsubheading Commit outstanding changes |
| |
| In particular you'll need to commit any changes to: |
| |
| @itemize @bullet |
| @item |
| @file{gdb/ChangeLog} |
| @item |
| @file{gdb/version.in} |
| @item |
| @file{gdb/NEWS} |
| @item |
| @file{gdb/README} |
| @end itemize |
| |
| @subsubheading Tag the release |
| |
| Something like: |
| |
| @smallexample |
| $ d=`date -u +%Y-%m-%d` |
| $ echo $d |
| 2002-01-24 |
| $ ( cd insight/src/gdb && cvs -f -q update ) |
| $ ( cd insight/src && cvs -f -q tag gdb_5_2-$d-release ) |
| @end smallexample |
| |
| Insight is used since that contains more of the release than |
| @value{GDBN} (@code{dejagnu} doesn't get tagged but I think we can live |
| with that). |
| |
| @subsubheading Mention the release on the trunk |
| |
| Just put something in the @file{ChangeLog} so that the trunk also |
| indicates when the release was made. |
| |
| @subsubheading Restart @file{gdb/version.in} |
| |
| If @file{gdb/version.in} does not contain an ISO date such as |
| @kbd{2002-01-24} then the daily @code{cronjob} won't update it. Having |
| committed all the release changes it can be set to |
| @file{5.2.0_0000-00-00-cvs} which will restart things (yes the @kbd{_} |
| is important - it affects the snapshot process). |
| |
| Don't forget the @file{ChangeLog}. |
| |
| @subsubheading Merge into trunk |
| |
| The files committed to the branch may also need changes merged into the |
| trunk. |
| |
| @subsubheading Revise the release schedule |
| |
| Post a revised release schedule to @email{gdb@@sources.redhat.com, GDB |
| Discussion List} with an updated announcement. The schedule can be |
| generated by running: |
| |
| @smallexample |
| $ ~/ss/schedule `date +%s` schedule |
| @end smallexample |
| |
| @noindent |
| The first parameter is approximate date/time in seconds (from the epoch) |
| of the most recent release. |
| |
| Also update the schedule @code{cronjob}. |
| |
| @section Post release |
| |
| Remove any @code{OBSOLETE} code. |
| |
| @node Testsuite |
| |
| @chapter Testsuite |
| @cindex test suite |
| |
| The testsuite is an important component of the @value{GDBN} package. |
| While it is always worthwhile to encourage user testing, in practice |
| this is rarely sufficient; users typically use only a small subset of |
| the available commands, and it has proven all too common for a change |
| to cause a significant regression that went unnoticed for some time. |
| |
| The @value{GDBN} testsuite uses the DejaGNU testing framework. |
| DejaGNU is built using @code{Tcl} and @code{expect}. The tests |
| themselves are calls to various @code{Tcl} procs; the framework runs all the |
| procs and summarizes the passes and fails. |
| |
| @section Using the Testsuite |
| |
| @cindex running the test suite |
| To run the testsuite, simply go to the @value{GDBN} object directory (or to the |
| testsuite's objdir) and type @code{make check}. This just sets up some |
| environment variables and invokes DejaGNU's @code{runtest} script. While |
| the testsuite is running, you'll get mentions of which test file is in use, |
| and a mention of any unexpected passes or fails. When the testsuite is |
| finished, you'll get a summary that looks like this: |
| |
| @smallexample |
| === gdb Summary === |
| |
| # of expected passes 6016 |
| # of unexpected failures 58 |
| # of unexpected successes 5 |
| # of expected failures 183 |
| # of unresolved testcases 3 |
| # of untested testcases 5 |
| @end smallexample |
| |
| The ideal test run consists of expected passes only; however, reality |
| conspires to keep us from this ideal. Unexpected failures indicate |
| real problems, whether in @value{GDBN} or in the testsuite. Expected |
| failures are still failures, but ones which have been decided are too |
| hard to deal with at the time; for instance, a test case might work |
| everywhere except on AIX, and there is no prospect of the AIX case |
| being fixed in the near future. Expected failures should not be added |
| lightly, since you may be masking serious bugs in @value{GDBN}. |
| Unexpected successes are expected fails that are passing for some |
| reason, while unresolved and untested cases often indicate some minor |
| catastrophe, such as the compiler being unable to deal with a test |
| program. |
| |
| When making any significant change to @value{GDBN}, you should run the |
| testsuite before and after the change, to confirm that there are no |
| regressions. Note that truly complete testing would require that you |
| run the testsuite with all supported configurations and a variety of |
| compilers; however this is more than really necessary. In many cases |
| testing with a single configuration is sufficient. Other useful |
| options are to test one big-endian (Sparc) and one little-endian (x86) |
| host, a cross config with a builtin simulator (powerpc-eabi, |
| mips-elf), or a 64-bit host (Alpha). |
| |
| If you add new functionality to @value{GDBN}, please consider adding |
| tests for it as well; this way future @value{GDBN} hackers can detect |
| and fix their changes that break the functionality you added. |
| Similarly, if you fix a bug that was not previously reported as a test |
| failure, please add a test case for it. Some cases are extremely |
| difficult to test, such as code that handles host OS failures or bugs |
| in particular versions of compilers, and it's OK not to try to write |
| tests for all of those. |
| |
| @section Testsuite Organization |
| |
| @cindex test suite organization |
| The testsuite is entirely contained in @file{gdb/testsuite}. While the |
| testsuite includes some makefiles and configury, these are very minimal, |
| and used for little besides cleaning up, since the tests themselves |
| handle the compilation of the programs that @value{GDBN} will run. The file |
| @file{testsuite/lib/gdb.exp} contains common utility procs useful for |
| all @value{GDBN} tests, while the directory @file{testsuite/config} contains |
| configuration-specific files, typically used for special-purpose |
| definitions of procs like @code{gdb_load} and @code{gdb_start}. |
| |
| The tests themselves are to be found in @file{testsuite/gdb.*} and |
| subdirectories of those. The names of the test files must always end |
| with @file{.exp}. DejaGNU collects the test files by wildcarding |
| in the test directories, so both subdirectories and individual files |
| get chosen and run in alphabetical order. |
| |
| The following table lists the main types of subdirectories and what they |
| are for. Since DejaGNU finds test files no matter where they are |
| located, and since each test file sets up its own compilation and |
| execution environment, this organization is simply for convenience and |
| intelligibility. |
| |
| @table @file |
| @item gdb.base |
| This is the base testsuite. The tests in it should apply to all |
| configurations of @value{GDBN} (but generic native-only tests may live here). |
| The test programs should be in the subset of C that is valid K&R, |
| ANSI/ISO, and C++ (@code{#ifdef}s are allowed if necessary, for instance |
| for prototypes). |
| |
| @item gdb.@var{lang} |
| Language-specific tests for any language @var{lang} besides C. Examples are |
| @file{gdb.c++} and @file{gdb.java}. |
| |
| @item gdb.@var{platform} |
| Non-portable tests. The tests are specific to a specific configuration |
| (host or target), such as HP-UX or eCos. Example is @file{gdb.hp}, for |
| HP-UX. |
| |
| @item gdb.@var{compiler} |
| Tests specific to a particular compiler. As of this writing (June |
| 1999), there aren't currently any groups of tests in this category that |
| couldn't just as sensibly be made platform-specific, but one could |
| imagine a @file{gdb.gcc}, for tests of @value{GDBN}'s handling of GCC |
| extensions. |
| |
| @item gdb.@var{subsystem} |
| Tests that exercise a specific @value{GDBN} subsystem in more depth. For |
| instance, @file{gdb.disasm} exercises various disassemblers, while |
| @file{gdb.stabs} tests pathways through the stabs symbol reader. |
| @end table |
| |
| @section Writing Tests |
| @cindex writing tests |
| |
| In many areas, the @value{GDBN} tests are already quite comprehensive; you |
| should be able to copy existing tests to handle new cases. |
| |
| You should try to use @code{gdb_test} whenever possible, since it |
| includes cases to handle all the unexpected errors that might happen. |
| However, it doesn't cost anything to add new test procedures; for |
| instance, @file{gdb.base/exprs.exp} defines a @code{test_expr} that |
| calls @code{gdb_test} multiple times. |
| |
| Only use @code{send_gdb} and @code{gdb_expect} when absolutely |
| necessary, such as when @value{GDBN} has several valid responses to a command. |
| |
| The source language programs do @emph{not} need to be in a consistent |
| style. Since @value{GDBN} is used to debug programs written in many different |
| styles, it's worth having a mix of styles in the testsuite; for |
| instance, some @value{GDBN} bugs involving the display of source lines would |
| never manifest themselves if the programs used GNU coding style |
| uniformly. |
| |
| @node Hints |
| |
| @chapter Hints |
| |
| Check the @file{README} file, it often has useful information that does not |
| appear anywhere else in the directory. |
| |
| @menu |
| * Getting Started:: Getting started working on @value{GDBN} |
| * Debugging GDB:: Debugging @value{GDBN} with itself |
| @end menu |
| |
| @node Getting Started,,, Hints |
| |
| @section Getting Started |
| |
| @value{GDBN} is a large and complicated program, and if you first starting to |
| work on it, it can be hard to know where to start. Fortunately, if you |
| know how to go about it, there are ways to figure out what is going on. |
| |
| This manual, the @value{GDBN} Internals manual, has information which applies |
| generally to many parts of @value{GDBN}. |
| |
| Information about particular functions or data structures are located in |
| comments with those functions or data structures. If you run across a |
| function or a global variable which does not have a comment correctly |
| explaining what is does, this can be thought of as a bug in @value{GDBN}; feel |
| free to submit a bug report, with a suggested comment if you can figure |
| out what the comment should say. If you find a comment which is |
| actually wrong, be especially sure to report that. |
| |
| Comments explaining the function of macros defined in host, target, or |
| native dependent files can be in several places. Sometimes they are |
| repeated every place the macro is defined. Sometimes they are where the |
| macro is used. Sometimes there is a header file which supplies a |
| default definition of the macro, and the comment is there. This manual |
| also documents all the available macros. |
| @c (@pxref{Host Conditionals}, @pxref{Target |
| @c Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete |
| @c Conditionals}) |
| |
| Start with the header files. Once you have some idea of how |
| @value{GDBN}'s internal symbol tables are stored (see @file{symtab.h}, |
| @file{gdbtypes.h}), you will find it much easier to understand the |
| code which uses and creates those symbol tables. |
| |
| You may wish to process the information you are getting somehow, to |
| enhance your understanding of it. Summarize it, translate it to another |
| language, add some (perhaps trivial or non-useful) feature to @value{GDBN}, use |
| the code to predict what a test case would do and write the test case |
| and verify your prediction, etc. If you are reading code and your eyes |
| are starting to glaze over, this is a sign you need to use a more active |
| approach. |
| |
| Once you have a part of @value{GDBN} to start with, you can find more |
| specifically the part you are looking for by stepping through each |
| function with the @code{next} command. Do not use @code{step} or you |
| will quickly get distracted; when the function you are stepping through |
| calls another function try only to get a big-picture understanding |
| (perhaps using the comment at the beginning of the function being |
| called) of what it does. This way you can identify which of the |
| functions being called by the function you are stepping through is the |
| one which you are interested in. You may need to examine the data |
| structures generated at each stage, with reference to the comments in |
| the header files explaining what the data structures are supposed to |
| look like. |
| |
| Of course, this same technique can be used if you are just reading the |
| code, rather than actually stepping through it. The same general |
| principle applies---when the code you are looking at calls something |
| else, just try to understand generally what the code being called does, |
| rather than worrying about all its details. |
| |
| @cindex command implementation |
| A good place to start when tracking down some particular area is with |
| a command which invokes that feature. Suppose you want to know how |
| single-stepping works. As a @value{GDBN} user, you know that the |
| @code{step} command invokes single-stepping. The command is invoked |
| via command tables (see @file{command.h}); by convention the function |
| which actually performs the command is formed by taking the name of |
| the command and adding @samp{_command}, or in the case of an |
| @code{info} subcommand, @samp{_info}. For example, the @code{step} |
| command invokes the @code{step_command} function and the @code{info |
| display} command invokes @code{display_info}. When this convention is |
| not followed, you might have to use @code{grep} or @kbd{M-x |
| tags-search} in emacs, or run @value{GDBN} on itself and set a |
| breakpoint in @code{execute_command}. |
| |
| @cindex @code{bug-gdb} mailing list |
| If all of the above fail, it may be appropriate to ask for information |
| on @code{bug-gdb}. But @emph{never} post a generic question like ``I was |
| wondering if anyone could give me some tips about understanding |
| @value{GDBN}''---if we had some magic secret we would put it in this manual. |
| Suggestions for improving the manual are always welcome, of course. |
| |
| @node Debugging GDB,,,Hints |
| |
| @section Debugging @value{GDBN} with itself |
| @cindex debugging @value{GDBN} |
| |
| If @value{GDBN} is limping on your machine, this is the preferred way to get it |
| fully functional. Be warned that in some ancient Unix systems, like |
| Ultrix 4.2, a program can't be running in one process while it is being |
| debugged in another. Rather than typing the command @kbd{@w{./gdb |
| ./gdb}}, which works on Suns and such, you can copy @file{gdb} to |
| @file{gdb2} and then type @kbd{@w{./gdb ./gdb2}}. |
| |
| When you run @value{GDBN} in the @value{GDBN} source directory, it will read a |
| @file{.gdbinit} file that sets up some simple things to make debugging |
| gdb easier. The @code{info} command, when executed without a subcommand |
| in a @value{GDBN} being debugged by gdb, will pop you back up to the top level |
| gdb. See @file{.gdbinit} for details. |
| |
| If you use emacs, you will probably want to do a @code{make TAGS} after |
| you configure your distribution; this will put the machine dependent |
| routines for your local machine where they will be accessed first by |
| @kbd{M-.} |
| |
| Also, make sure that you've either compiled @value{GDBN} with your local cc, or |
| have run @code{fixincludes} if you are compiling with gcc. |
| |
| @section Submitting Patches |
| |
| @cindex submitting patches |
| Thanks for thinking of offering your changes back to the community of |
| @value{GDBN} users. In general we like to get well designed enhancements. |
| Thanks also for checking in advance about the best way to transfer the |
| changes. |
| |
| The @value{GDBN} maintainers will only install ``cleanly designed'' patches. |
| This manual summarizes what we believe to be clean design for @value{GDBN}. |
| |
| If the maintainers don't have time to put the patch in when it arrives, |
| or if there is any question about a patch, it goes into a large queue |
| with everyone else's patches and bug reports. |
| |
| @cindex legal papers for code contributions |
| The legal issue is that to incorporate substantial changes requires a |
| copyright assignment from you and/or your employer, granting ownership |
| of the changes to the Free Software Foundation. You can get the |
| standard documents for doing this by sending mail to @code{gnu@@gnu.org} |
| and asking for it. We recommend that people write in "All programs |
| owned by the Free Software Foundation" as "NAME OF PROGRAM", so that |
| changes in many programs (not just @value{GDBN}, but GAS, Emacs, GCC, |
| etc) can be |
| contributed with only one piece of legalese pushed through the |
| bureaucracy and filed with the FSF. We can't start merging changes until |
| this paperwork is received by the FSF (their rules, which we follow |
| since we maintain it for them). |
| |
| Technically, the easiest way to receive changes is to receive each |
| feature as a small context diff or unidiff, suitable for @code{patch}. |
| Each message sent to me should include the changes to C code and |
| header files for a single feature, plus @file{ChangeLog} entries for |
| each directory where files were modified, and diffs for any changes |
| needed to the manuals (@file{gdb/doc/gdb.texinfo} or |
| @file{gdb/doc/gdbint.texinfo}). If there are a lot of changes for a |
| single feature, they can be split down into multiple messages. |
| |
| In this way, if we read and like the feature, we can add it to the |
| sources with a single patch command, do some testing, and check it in. |
| If you leave out the @file{ChangeLog}, we have to write one. If you leave |
| out the doc, we have to puzzle out what needs documenting. Etc., etc. |
| |
| The reason to send each change in a separate message is that we will not |
| install some of the changes. They'll be returned to you with questions |
| or comments. If we're doing our job correctly, the message back to you |
| will say what you have to fix in order to make the change acceptable. |
| The reason to have separate messages for separate features is so that |
| the acceptable changes can be installed while one or more changes are |
| being reworked. If multiple features are sent in a single message, we |
| tend to not put in the effort to sort out the acceptable changes from |
| the unacceptable, so none of the features get installed until all are |
| acceptable. |
| |
| If this sounds painful or authoritarian, well, it is. But we get a lot |
| of bug reports and a lot of patches, and many of them don't get |
| installed because we don't have the time to finish the job that the bug |
| reporter or the contributor could have done. Patches that arrive |
| complete, working, and well designed, tend to get installed on the day |
| they arrive. The others go into a queue and get installed as time |
| permits, which, since the maintainers have many demands to meet, may not |
| be for quite some time. |
| |
| Please send patches directly to |
| @email{gdb-patches@@sources.redhat.com, the @value{GDBN} maintainers}. |
| |
| @section Obsolete Conditionals |
| @cindex obsolete code |
| |
| Fragments of old code in @value{GDBN} sometimes reference or set the following |
| configuration macros. They should not be used by new code, and old uses |
| should be removed as those parts of the debugger are otherwise touched. |
| |
| @table @code |
| @item STACK_END_ADDR |
| This macro used to define where the end of the stack appeared, for use |
| in interpreting core file formats that don't record this address in the |
| core file itself. This information is now configured in BFD, and @value{GDBN} |
| gets the info portably from there. The values in @value{GDBN}'s configuration |
| files should be moved into BFD configuration files (if needed there), |
| and deleted from all of @value{GDBN}'s config files. |
| |
| Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR |
| is so old that it has never been converted to use BFD. Now that's old! |
| |
| @end table |
| |
| @include observer.texi |
| @include fdl.texi |
| |
| @node Index |
| @unnumbered Index |
| |
| @printindex cp |
| |
| @bye |