| 2006-03-03 Shrirang Khisti <shrirangk@kpitcummins.com) |
| |
| * xc16x-asm.c: Regenerate. |
| * xc16x-dis.c: Regenerate. |
| * xc16x-ibld.c: Regenerate. |
| |
| 2006-02-27 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * po/Make-in: Add html target. |
| |
| 2006-02-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by |
| Intel Merom New Instructions. |
| (THREE_BYTE_0): Likewise. |
| (THREE_BYTE_1): Likewise. |
| (three_byte_table): Likewise. |
| (dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use |
| THREE_BYTE_1 for entry 0x3a. |
| (twobyte_has_modrm): Updated. |
| (twobyte_uses_SSE_prefix): Likewise. |
| (print_insn): Handle 3-byte opcodes used by Intel Merom New |
| Instructions. |
| |
| 2006-02-24 David S. Miller <davem@sunset.davemloft.net> |
| |
| * sparc-dis.c (v9_priv_reg_names): Add "gl" entry. |
| (v9_hpriv_reg_names): New table. |
| (print_insn_sparc): Allow values up to 16 for '?' and '!'. |
| New cases '$' and '%' for read/write hyperprivileged register. |
| * sparc-opc.c (sparc_opcodes): Add new entries for UA2005 |
| window handling and rdhpr/wrhpr instructions. |
| |
| 2006-02-24 DJ Delorie <dj@redhat.com> |
| |
| * m32c-desc.c: Regenerate with linker relaxation attributes. |
| * m32c-desc.h: Likewise. |
| * m32c-dis.c: Likewise. |
| * m32c-opc.c: Likewise. |
| |
| 2006-02-24 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (arm_opcodes): Add V7 instructions. |
| (thumb32_opcodes): Ditto. Handle V7M MSR/MRS variants. |
| (print_arm_address): New function. |
| (print_insn_arm): Use it. Add 'P' and 'U' cases. |
| (psr_name): New function. |
| (print_insn_thumb32): Add 'U', 'C' and 'D' cases. |
| |
| 2006-02-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * ia64-opc-i.c (bXc): New. |
| (mXc): Likewise. |
| (OpX2TaTbYaXcC): Likewise. |
| (TF). Likewise. |
| (TFCM). Likewise. |
| (ia64_opcodes_i): Add instructions for tf. |
| |
| * ia64-opc.h (IMMU5b): New. |
| |
| * ia64-asmtab.c: Regenerated. |
| |
| 2006-02-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * ia64-gen.c: Update copyright years. |
| * ia64-opc-b.c: Likewise. |
| |
| 2006-02-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * ia64-gen.c (lookup_regindex): Handle ".vm". |
| (print_dependency_table): Handle '\"'. |
| |
| * ia64-ic.tbl: Updated from SDM 2.2. |
| * ia64-raw.tbl: Likewise. |
| * ia64-waw.tbl: Likewise. |
| * ia64-asmtab.c: Regenerated. |
| |
| * ia64-opc-b.c (ia64_opcodes_b): Add vmsw.0 and vmsw.1. |
| |
| 2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com> |
| Anil Paranjape <anilp1@kpitcummins.com> |
| Shilin Shakti <shilins@kpitcummins.com> |
| |
| * xc16x-desc.h: New file |
| * xc16x-desc.c: New file |
| * xc16x-opc.h: New file |
| * xc16x-opc.c: New file |
| * xc16x-ibld.c: New file |
| * xc16x-asm.c: New file |
| * xc16x-dis.c: New file |
| * Makefile.am: Entries for xc16x |
| * Makefile.in: Regenerate |
| * cofigure.in: Add xc16x target information. |
| * configure: Regenerate. |
| * disassemble.c: Add xc16x target information. |
| |
| 2006-02-11 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386_twobyte): Use "movZ" for debug register |
| moves. |
| |
| 2006-02-11 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c ('Z'): Add a new macro. |
| (dis386_twobyte): Use "movZ" for control register moves. |
| |
| 2006-02-10 Nick Clifton <nickc@redhat.com> |
| |
| * iq2000-asm.c: Regenerate. |
| |
| 2006-02-07 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-dis.c (print_insn_m68k): Use bfd_m68k_mach_to_features. |
| |
| 2006-01-26 David Ung <davidu@mips.com> |
| |
| * mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx, |
| ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d, |
| floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d, |
| nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d, |
| rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s. |
| |
| 2006-01-18 Arnold Metselaar <arnoldm@sourceware.org> |
| |
| * z80-dis.c (struct buffer, prt_d, prt_d_n, arit_d, ld_r_d, |
| ld_d_r, pref_xd_cb): Use signed char to hold data to be |
| disassembled. |
| * z80-dis.c (TXTSIZ): Increase buffer size to 24, this fixes |
| buffer overflows when disassembling instructions like |
| ld (ix+123),0x23 |
| * z80-dis.c (opc_ind, pref_xd_cb): Suppress '+' in an indexed |
| operand, if the offset is negative. |
| |
| 2006-01-17 Arnold Metselaar <arnoldm@sourceware.org> |
| |
| * z80-dis.c (struct buffer, prt_d, prt_d_n, pref_xd_cb): Use |
| unsigned char to hold data to be disassembled. |
| |
| 2006-01-17 Andreas Schwab <schwab@suse.de> |
| |
| PR binutils/1486 |
| * disassemble.c (disassemble_init_for_target): Set |
| disassembler_needs_relocs for bfd_arch_arm. |
| |
| 2006-01-16 Paul Brook <paul@codesourcery.com> |
| |
| * m68k-opc.c (m68k_opcodes): Fix opcodes for ColdFire f?abss, |
| f?add?, and f?sub? instructions. |
| |
| 2006-01-16 Nick Clifton <nickc@redhat.com> |
| |
| * po/zh_CN.po: New Chinese (simplified) translation. |
| * configure.in (ALL_LINGUAS): Add "zh_CH". |
| * configure: Regenerate. |
| |
| 2006-01-05 Paul Brook <paul@codesourcery.com> |
| |
| * m68k-opc.c (m68k_opcodes): Add missing ColdFire fdsqrtd entry. |
| |
| 2006-01-06 DJ Delorie <dj@redhat.com> |
| |
| * m32c-desc.c: Regenerate. |
| * m32c-opc.c: Regenerate. |
| * m32c-opc.h: Regenerate. |
| |
| 2006-01-03 DJ Delorie <dj@redhat.com> |
| |
| * cgen-ibld.in (extract_normal): Avoid memory range errors. |
| * m32c-ibld.c: Regenerated. |
| |
| For older changes see ChangeLog-2005 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
