| What has changed in GDB? |
| (Organized release by release) |
| |
| *** Changes since GDB 6.3 |
| |
| * Deprecated commands removed |
| |
| The following commands, that were deprecated in 2000, have been |
| removed: |
| |
| Command Replacement |
| set|show arm disassembly-flavor set|show arm disassembler |
| othernames set arm disassembler |
| set|show remotedebug set|show debug remote |
| set|show archdebug set|show debug arch |
| set|show eventdebug set|show debug event |
| regs info registers |
| |
| * New BSD user-level threads support |
| |
| It is now possible to debug programs using the user-level threads |
| library on OpenBSD and FreeBSD. Currently supported (target) |
| configurations are: |
| |
| FreeBSD/amd64 x86_64-*-freebsd* |
| FreeBSD/i386 i386-*-freebsd* |
| OpenBSD/i386 i386-*-openbsd* |
| |
| Note that the new kernel threads libraries introduced in FreeBSD 5.x |
| are not yet supported. |
| |
| * New support for Matsushita MN10300 w/sim added |
| (Work in progress). mn10300-elf. |
| |
| * REMOVED configurations and files |
| |
| VxWorks and the XDR protocol *-*-vxworks |
| Renesas H8/300S h8300*-*-* |
| Motorola MCORE mcore-*-* |
| Matsushita MN10300 w/simulator mn10300-*-* |
| National Semiconductor NS32000 ns32k-*-* |
| NEC V850 v850-*-* |
| |
| *** Changes in GDB 6.3: |
| |
| * New command line option |
| |
| GDB now accepts -l followed by a number to set the timeout for remote |
| debugging. |
| |
| * GDB works with GCC -feliminate-dwarf2-dups |
| |
| GDB now supports a more compact representation of DWARF-2 debug |
| information using DW_FORM_ref_addr references. These are produced |
| by GCC with the option -feliminate-dwarf2-dups and also by some |
| proprietary compilers. With GCC, you must use GCC 3.3.4 or later |
| to use -feliminate-dwarf2-dups. |
| |
| * Internationalization |
| |
| When supported by the host system, GDB will be built with |
| internationalization (libintl). The task of marking up the sources is |
| continued, we're looking forward to our first translation. |
| |
| * Ada |
| |
| Initial support for debugging programs compiled with the GNAT |
| implementation of the Ada programming language has been integrated |
| into GDB. In this release, support is limited to expression evaluation. |
| |
| * New native configurations |
| |
| GNU/Linux/m32r m32r-*-linux-gnu |
| |
| * Remote 'p' packet |
| |
| GDB's remote protocol now includes support for the 'p' packet. This |
| packet is used to fetch individual registers from a remote inferior. |
| |
| * END-OF-LIFE registers[] compatibility module |
| |
| GDB's internal register infrastructure has been completely rewritten. |
| The new infrastructure making possible the implementation of key new |
| features including 32x64 (e.g., 64-bit amd64 GDB debugging a 32-bit |
| i386 application). |
| |
| GDB 6.3 will be the last release to include the the registers[] |
| compatibility module that allowed out-of-date configurations to |
| continue to work. This change directly impacts the following |
| configurations: |
| |
| hppa-*-hpux |
| ia64-*-aix |
| mips-*-irix* |
| *-*-lynx |
| mips-*-linux-gnu |
| sds protocol |
| xdr protocol |
| powerpc bdm protocol |
| |
| Unless there is activity to revive these configurations, they will be |
| made OBSOLETE in GDB 6.4, and REMOVED from GDB 6.5. |
| |
| * OBSOLETE configurations and files |
| |
| Configurations that have been declared obsolete in this release have |
| been commented out. Unless there is activity to revive these |
| configurations, the next release of GDB will have their sources |
| permanently REMOVED. |
| |
| h8300-*-* |
| mcore-*-* |
| mn10300-*-* |
| ns32k-*-* |
| sh64-*-* |
| v850-*-* |
| |
| *** Changes in GDB 6.2.1: |
| |
| * MIPS `break main; run' gave an heuristic-fence-post warning |
| |
| When attempting to run even a simple program, a warning about |
| heuristic-fence-post being hit would be reported. This problem has |
| been fixed. |
| |
| * MIPS IRIX 'long double' crashed GDB |
| |
| When examining a long double variable, GDB would get a segmentation |
| fault. The crash has been fixed (but GDB 6.2 cannot correctly examine |
| IRIX long double values). |
| |
| * VAX and "next" |
| |
| A bug in the VAX stack code was causing problems with the "next" |
| command. This problem has been fixed. |
| |
| *** Changes in GDB 6.2: |
| |
| * Fix for ``many threads'' |
| |
| On GNU/Linux systems that use the NPTL threads library, a program |
| rapidly creating and deleting threads would confuse GDB leading to the |
| error message: |
| |
| ptrace: No such process. |
| thread_db_get_info: cannot get thread info: generic error |
| |
| This problem has been fixed. |
| |
| * "-async" and "-noasync" options removed. |
| |
| Support for the broken "-noasync" option has been removed (it caused |
| GDB to dump core). |
| |
| * New ``start'' command. |
| |
| This command runs the program until the begining of the main procedure. |
| |
| * New BSD Kernel Data Access Library (libkvm) interface |
| |
| Using ``target kvm'' it is now possible to debug kernel core dumps and |
| live kernel memory images on various FreeBSD, NetBSD and OpenBSD |
| platforms. Currently supported (native-only) configurations are: |
| |
| FreeBSD/amd64 x86_64-*-freebsd* |
| FreeBSD/i386 i?86-*-freebsd* |
| NetBSD/i386 i?86-*-netbsd* |
| NetBSD/m68k m68*-*-netbsd* |
| NetBSD/sparc sparc-*-netbsd* |
| OpenBSD/amd64 x86_64-*-openbsd* |
| OpenBSD/i386 i?86-*-openbsd* |
| OpenBSD/m68k m68*-openbsd* |
| OpenBSD/sparc sparc-*-openbsd* |
| |
| * Signal trampoline code overhauled |
| |
| Many generic problems with GDB's signal handling code have been fixed. |
| These include: backtraces through non-contiguous stacks; recognition |
| of sa_sigaction signal trampolines; backtrace from a NULL pointer |
| call; backtrace through a signal trampoline; step into and out of |
| signal handlers; and single-stepping in the signal trampoline. |
| |
| Please note that kernel bugs are a limiting factor here. These |
| features have been shown to work on an s390 GNU/Linux system that |
| include a 2.6.8-rc1 kernel. Ref PR breakpoints/1702. |
| |
| * Cygwin support for DWARF 2 added. |
| |
| * New native configurations |
| |
| GNU/Linux/hppa hppa*-*-linux* |
| OpenBSD/hppa hppa*-*-openbsd* |
| OpenBSD/m68k m68*-*-openbsd* |
| OpenBSD/m88k m88*-*-openbsd* |
| OpenBSD/powerpc powerpc-*-openbsd* |
| NetBSD/vax vax-*-netbsd* |
| OpenBSD/vax vax-*-openbsd* |
| |
| * END-OF-LIFE frame compatibility module |
| |
| GDB's internal frame infrastructure has been completely rewritten. |
| The new infrastructure making it possible to support key new features |
| including DWARF 2 Call Frame Information. To aid in the task of |
| migrating old configurations to this new infrastructure, a |
| compatibility module, that allowed old configurations to continue to |
| work, was also included. |
| |
| GDB 6.2 will be the last release to include this frame compatibility |
| module. This change directly impacts the following configurations: |
| |
| h8300-*-* |
| mcore-*-* |
| mn10300-*-* |
| ns32k-*-* |
| sh64-*-* |
| v850-*-* |
| xstormy16-*-* |
| |
| Unless there is activity to revive these configurations, they will be |
| made OBSOLETE in GDB 6.3, and REMOVED from GDB 6.4. |
| |
| * REMOVED configurations and files |
| |
| Sun 3, running SunOS 3 m68*-*-sunos3* |
| Sun 3, running SunOS 4 m68*-*-sunos4* |
| Sun 2, running SunOS 3 m68000-*-sunos3* |
| Sun 2, running SunOS 4 m68000-*-sunos4* |
| Motorola 680x0 running LynxOS m68*-*-lynxos* |
| AT&T 3b1/Unix pc m68*-att-* |
| Bull DPX2 (68k, System V release 3) m68*-bull-sysv* |
| decstation mips-dec-* mips-little-* |
| riscos mips-*-riscos* mips-*-sysv* |
| sonymips mips-sony-* |
| sysv mips*-*-sysv4* (IRIX 5/6 not included) |
| |
| *** Changes in GDB 6.1.1: |
| |
| * TUI (Text-mode User Interface) built-in (also included in GDB 6.1) |
| |
| The TUI (Text-mode User Interface) is now built as part of a default |
| GDB configuration. It is enabled by either selecting the TUI with the |
| command line option "-i=tui" or by running the separate "gdbtui" |
| program. For more information on the TUI, see the manual "Debugging |
| with GDB". |
| |
| * Pending breakpoint support (also included in GDB 6.1) |
| |
| Support has been added to allow you to specify breakpoints in shared |
| libraries that have not yet been loaded. If a breakpoint location |
| cannot be found, and the "breakpoint pending" option is set to auto, |
| GDB queries you if you wish to make the breakpoint pending on a future |
| shared-library load. If and when GDB resolves the breakpoint symbol, |
| the pending breakpoint is removed as one or more regular breakpoints |
| are created. |
| |
| Pending breakpoints are very useful for GCJ Java debugging. |
| |
| * Fixed ISO-C build problems |
| |
| The files bfd/elf-bfd.h, gdb/dictionary.c and gdb/types.c contained |
| non ISO-C code that stopped them being built using a more strict ISO-C |
| compiler (e.g., IBM's C compiler). |
| |
| * Fixed build problem on IRIX 5 |
| |
| Due to header problems with <sys/proc.h>, the file gdb/proc-api.c |
| wasn't able to compile compile on an IRIX 5 system. |
| |
| * Added execute permission to gdb/gdbserver/configure |
| |
| The shell script gdb/testsuite/gdb.stabs/configure lacked execute |
| permission. This bug would cause configure to fail on a number of |
| systems (Solaris, IRIX). Ref: server/519. |
| |
| * Fixed build problem on hpux2.0w-hp-hpux11.00 using the HP ANSI C compiler |
| |
| Older HPUX ANSI C compilers did not accept variable array sizes. somsolib.c |
| has been updated to use constant array sizes. |
| |
| * Fixed a panic in the DWARF Call Frame Info code on Solaris 2.7 |
| |
| GCC 3.3.2, on Solaris 2.7, includes the DW_EH_PE_funcrel encoding in |
| its generated DWARF Call Frame Info. This encoding was causing GDB to |
| panic, that panic has been fixed. Ref: gdb/1628. |
| |
| * Fixed a problem when examining parameters in shared library code. |
| |
| When examining parameters in optimized shared library code generated |
| by a mainline GCC, GDB would incorrectly report ``Variable "..." is |
| not available''. GDB now correctly displays the variable's value. |
| |
| *** Changes in GDB 6.1: |
| |
| * Removed --with-mmalloc |
| |
| Support for the mmalloc memory manager has been removed, as it |
| conflicted with the internal gdb byte cache. |
| |
| * Changes in AMD64 configurations |
| |
| The AMD64 target now includes the %cs and %ss registers. As a result |
| the AMD64 remote protocol has changed; this affects the floating-point |
| and SSE registers. If you rely on those registers for your debugging, |
| you should upgrade gdbserver on the remote side. |
| |
| * Revised SPARC target |
| |
| The SPARC target has been completely revised, incorporating the |
| FreeBSD/sparc64 support that was added for GDB 6.0. As a result |
| support for LynxOS and SunOS 4 has been dropped. Calling functions |
| from within GDB on operating systems with a non-executable stack |
| (Solaris, OpenBSD) now works. |
| |
| * New C++ demangler |
| |
| GDB has a new C++ demangler which does a better job on the mangled |
| names generated by current versions of g++. It also runs faster, so |
| with this and other changes gdb should now start faster on large C++ |
| programs. |
| |
| * DWARF 2 Location Expressions |
| |
| GDB support for location expressions has been extended to support function |
| arguments and frame bases. Older versions of GDB could crash when they |
| encountered these. |
| |
| * C++ nested types and namespaces |
| |
| GDB's support for nested types and namespaces in C++ has been |
| improved, especially if you use the DWARF 2 debugging format. (This |
| is the default for recent versions of GCC on most platforms.) |
| Specifically, if you have a class "Inner" defined within a class or |
| namespace "Outer", then GDB realizes that the class's name is |
| "Outer::Inner", not simply "Inner". This should greatly reduce the |
| frequency of complaints about not finding RTTI symbols. In addition, |
| if you are stopped at inside of a function defined within a namespace, |
| GDB modifies its name lookup accordingly. |
| |
| * New native configurations |
| |
| NetBSD/amd64 x86_64-*-netbsd* |
| OpenBSD/amd64 x86_64-*-openbsd* |
| OpenBSD/alpha alpha*-*-openbsd* |
| OpenBSD/sparc sparc-*-openbsd* |
| OpenBSD/sparc64 sparc64-*-openbsd* |
| |
| * New debugging protocols |
| |
| M32R with SDI protocol m32r-*-elf* |
| |
| * "set prompt-escape-char" command deleted. |
| |
| The command "set prompt-escape-char" has been deleted. This command, |
| and its very obscure effet on GDB's prompt, was never documented, |
| tested, nor mentioned in the NEWS file. |
| |
| * OBSOLETE configurations and files |
| |
| Configurations that have been declared obsolete in this release have |
| been commented out. Unless there is activity to revive these |
| configurations, the next release of GDB will have their sources |
| permanently REMOVED. |
| |
| Sun 3, running SunOS 3 m68*-*-sunos3* |
| Sun 3, running SunOS 4 m68*-*-sunos4* |
| Sun 2, running SunOS 3 m68000-*-sunos3* |
| Sun 2, running SunOS 4 m68000-*-sunos4* |
| Motorola 680x0 running LynxOS m68*-*-lynxos* |
| AT&T 3b1/Unix pc m68*-att-* |
| Bull DPX2 (68k, System V release 3) m68*-bull-sysv* |
| decstation mips-dec-* mips-little-* |
| riscos mips-*-riscos* mips-*-sysv* |
| sonymips mips-sony-* |
| sysv mips*-*-sysv4* (IRIX 5/6 not included) |
| |
| * REMOVED configurations and files |
| |
| SGI Irix-4.x mips-sgi-irix4 or iris4 |
| SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris |
| Z8000 simulator z8k-zilog-none or z8ksim |
| Matsushita MN10200 w/simulator mn10200-*-* |
| H8/500 simulator h8500-hitachi-hms or h8500hms |
| HP/PA running BSD hppa*-*-bsd* |
| HP/PA running OSF/1 hppa*-*-osf* |
| HP/PA Pro target hppa*-*-pro* |
| PMAX (MIPS) running Mach 3.0 mips*-*-mach3* |
| 386BSD i[3456]86-*-bsd* |
| Sequent family i[3456]86-sequent-sysv4* |
| i[3456]86-sequent-sysv* |
| i[3456]86-sequent-bsd* |
| SPARC running LynxOS sparc-*-lynxos* |
| SPARC running SunOS 4 sparc-*-sunos4* |
| Tsqware Sparclet sparclet-*-* |
| Fujitsu SPARClite sparclite-fujitsu-none or sparclite |
| |
| *** Changes in GDB 6.0: |
| |
| * Objective-C |
| |
| Support for debugging the Objective-C programming language has been |
| integrated into GDB. |
| |
| * New backtrace mechanism (includes DWARF 2 Call Frame Information). |
| |
| DWARF 2's Call Frame Information makes available compiler generated |
| information that more exactly describes the program's run-time stack. |
| By using this information, GDB is able to provide more robust stack |
| backtraces. |
| |
| The i386, amd64 (nee, x86-64), Alpha, m68hc11, ia64, and m32r targets |
| have been updated to use a new backtrace mechanism which includes |
| DWARF 2 CFI support. |
| |
| * Hosted file I/O. |
| |
| GDB's remote protocol has been extended to include support for hosted |
| file I/O (where the remote target uses GDB's file system). See GDB's |
| remote protocol documentation for details. |
| |
| * All targets using the new architecture framework. |
| |
| All of GDB's targets have been updated to use the new internal |
| architecture framework. The way is now open for future GDB releases |
| to include cross-architecture native debugging support (i386 on amd64, |
| ppc32 on ppc64). |
| |
| * GNU/Linux's Thread Local Storage (TLS) |
| |
| GDB now includes support for for the GNU/Linux implementation of |
| per-thread variables. |
| |
| * GNU/Linux's Native POSIX Thread Library (NPTL) |
| |
| GDB's thread code has been updated to work with either the new |
| GNU/Linux NPTL thread library or the older "LinuxThreads" library. |
| |
| * Separate debug info. |
| |
| GDB, in conjunction with BINUTILS, now supports a mechanism for |
| automatically loading debug information from a separate file. Instead |
| of shipping full debug and non-debug versions of system libraries, |
| system integrators can now instead ship just the stripped libraries |
| and optional debug files. |
| |
| * DWARF 2 Location Expressions |
| |
| DWARF 2 Location Expressions allow the compiler to more completely |
| describe the location of variables (even in optimized code) to the |
| debugger. |
| |
| GDB now includes preliminary support for location expressions (support |
| for DW_OP_piece is still missing). |
| |
| * Java |
| |
| A number of long standing bugs that caused GDB to die while starting a |
| Java application have been fixed. GDB's Java support is now |
| considered "useable". |
| |
| * GNU/Linux support for fork, vfork, and exec. |
| |
| The "catch fork", "catch exec", "catch vfork", and "set follow-fork-mode" |
| commands are now implemented for GNU/Linux. They require a 2.5.x or later |
| kernel. |
| |
| * GDB supports logging output to a file |
| |
| There are two new commands, "set logging" and "show logging", which can be |
| used to capture GDB's output to a file. |
| |
| * The meaning of "detach" has changed for gdbserver |
| |
| The "detach" command will now resume the application, as documented. To |
| disconnect from gdbserver and leave it stopped, use the new "disconnect" |
| command. |
| |
| * d10v, m68hc11 `regs' command deprecated |
| |
| The `info registers' command has been updated so that it displays the |
| registers using a format identical to the old `regs' command. |
| |
| * Profiling support |
| |
| A new command, "maint set profile on/off", has been added. This command can |
| be used to enable or disable profiling while running GDB, to profile a |
| session or a set of commands. In addition there is a new configure switch, |
| "--enable-profiling", which will cause GDB to be compiled with profiling |
| data, for more informative profiling results. |
| |
| * Default MI syntax changed to "mi2". |
| |
| The default MI (machine interface) syntax, enabled by the command line |
| option "-i=mi", has been changed to "mi2". The previous MI syntax, |
| "mi1", can be enabled by specifying the option "-i=mi1". |
| |
| Support for the original "mi0" syntax (included in GDB 5.0) has been |
| removed. |
| |
| Fix for gdb/192: removed extraneous space when displaying frame level. |
| Fix for gdb/672: update changelist is now output in mi list format. |
| Fix for gdb/702: a -var-assign that updates the value now shows up |
| in a subsequent -var-update. |
| |
| * New native configurations. |
| |
| FreeBSD/amd64 x86_64-*-freebsd* |
| |
| * Multi-arched targets. |
| |
| HP/PA HPUX11 hppa*-*-hpux* |
| Renesas M32R/D w/simulator m32r-*-elf* |
| |
| * OBSOLETE configurations and files |
| |
| Configurations that have been declared obsolete in this release have |
| been commented out. Unless there is activity to revive these |
| configurations, the next release of GDB will have their sources |
| permanently REMOVED. |
| |
| Z8000 simulator z8k-zilog-none or z8ksim |
| Matsushita MN10200 w/simulator mn10200-*-* |
| H8/500 simulator h8500-hitachi-hms or h8500hms |
| HP/PA running BSD hppa*-*-bsd* |
| HP/PA running OSF/1 hppa*-*-osf* |
| HP/PA Pro target hppa*-*-pro* |
| PMAX (MIPS) running Mach 3.0 mips*-*-mach3* |
| Sequent family i[3456]86-sequent-sysv4* |
| i[3456]86-sequent-sysv* |
| i[3456]86-sequent-bsd* |
| Tsqware Sparclet sparclet-*-* |
| Fujitsu SPARClite sparclite-fujitsu-none or sparclite |
| |
| * REMOVED configurations and files |
| |
| V850EA ISA |
| Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
| IBM AIX PS/2 i[3456]86-*-aix |
| i386 running Mach 3.0 i[3456]86-*-mach3* |
| i386 running Mach i[3456]86-*-mach* |
| i386 running OSF/1 i[3456]86-*osf1mk* |
| HP/Apollo 68k Family m68*-apollo*-sysv*, |
| m68*-apollo*-bsd*, |
| m68*-hp-bsd*, m68*-hp-hpux* |
| Argonaut Risc Chip (ARC) arc-*-* |
| Mitsubishi D30V d30v-*-* |
| Fujitsu FR30 fr30-*-elf* |
| OS/9000 i[34]86-*-os9k |
| I960 with MON960 i960-*-coff |
| |
| * MIPS $fp behavior changed |
| |
| The convenience variable $fp, for the MIPS, now consistently returns |
| the address of the current frame's base. Previously, depending on the |
| context, $fp could refer to either $sp or the current frame's base |
| address. See ``8.10 Registers'' in the manual ``Debugging with GDB: |
| The GNU Source-Level Debugger''. |
| |
| *** Changes in GDB 5.3: |
| |
| * GNU/Linux shared library multi-threaded performance improved. |
| |
| When debugging a multi-threaded application on GNU/Linux, GDB now uses |
| `/proc', in preference to `ptrace' for memory reads. This may result |
| in an improvement in the start-up time of multi-threaded, shared |
| library applications when run under GDB. One GDB user writes: ``loads |
| shared libs like mad''. |
| |
| * ``gdbserver'' now supports multi-threaded applications on some targets |
| |
| Support for debugging multi-threaded applications which use |
| the GNU/Linux LinuxThreads package has been added for |
| arm*-*-linux*-gnu*, i[3456]86-*-linux*-gnu*, mips*-*-linux*-gnu*, |
| powerpc*-*-linux*-gnu*, and sh*-*-linux*-gnu*. |
| |
| * GDB now supports C/C++ preprocessor macros. |
| |
| GDB now expands preprocessor macro invocations in C/C++ expressions, |
| and provides various commands for showing macro definitions and how |
| they expand. |
| |
| The new command `macro expand EXPRESSION' expands any macro |
| invocations in expression, and shows the result. |
| |
| The new command `show macro MACRO-NAME' shows the definition of the |
| macro named MACRO-NAME, and where it was defined. |
| |
| Most compilers don't include information about macros in the debugging |
| information by default. In GCC 3.1, for example, you need to compile |
| your program with the options `-gdwarf-2 -g3'. If the macro |
| information is present in the executable, GDB will read it. |
| |
| * Multi-arched targets. |
| |
| DEC Alpha (partial) alpha*-*-* |
| DEC VAX (partial) vax-*-* |
| NEC V850 v850-*-* |
| National Semiconductor NS32000 (partial) ns32k-*-* |
| Motorola 68000 (partial) m68k-*-* |
| Motorola MCORE mcore-*-* |
| |
| * New targets. |
| |
| Fujitsu FRV architecture added by Red Hat frv*-*-* |
| |
| |
| * New native configurations |
| |
| Alpha NetBSD alpha*-*-netbsd* |
| SH NetBSD sh*-*-netbsdelf* |
| MIPS NetBSD mips*-*-netbsd* |
| UltraSPARC NetBSD sparc64-*-netbsd* |
| |
| * OBSOLETE configurations and files |
| |
| Configurations that have been declared obsolete in this release have |
| been commented out. Unless there is activity to revive these |
| configurations, the next release of GDB will have their sources |
| permanently REMOVED. |
| |
| Mitsubishi D30V d30v-*-* |
| OS/9000 i[34]86-*-os9k |
| IBM AIX PS/2 i[3456]86-*-aix |
| Fujitsu FR30 fr30-*-elf* |
| Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
| Argonaut Risc Chip (ARC) arc-*-* |
| i386 running Mach 3.0 i[3456]86-*-mach3* |
| i386 running Mach i[3456]86-*-mach* |
| i386 running OSF/1 i[3456]86-*osf1mk* |
| HP/Apollo 68k Family m68*-apollo*-sysv*, |
| m68*-apollo*-bsd*, |
| m68*-hp-bsd*, m68*-hp-hpux* |
| I960 with MON960 i960-*-coff |
| |
| * OBSOLETE languages |
| |
| CHILL, a Pascal like language used by telecommunications companies. |
| |
| * REMOVED configurations and files |
| |
| AMD 29k family via UDI a29k-amd-udi, udi29k |
| A29K VxWorks a29k-*-vxworks |
| AMD 29000 embedded, using EBMON a29k-none-none |
| AMD 29000 embedded with COFF a29k-none-coff |
| AMD 29000 embedded with a.out a29k-none-aout |
| |
| testsuite/gdb.hp/gdb.threads-hp/ directory |
| |
| * New command "set max-user-call-depth <nnn>" |
| |
| This command allows the user to limit the call depth of user-defined |
| commands. The default is 1024. |
| |
| * Changes in FreeBSD/i386 native debugging. |
| |
| Support for the "generate-core-file" has been added. |
| |
| * New commands "dump", "append", and "restore". |
| |
| These commands allow data to be copied from target memory |
| to a bfd-format or binary file (dump and append), and back |
| from a file into memory (restore). |
| |
| * Improved "next/step" support on multi-processor Alpha Tru64. |
| |
| The previous single-step mechanism could cause unpredictable problems, |
| including the random appearance of SIGSEGV or SIGTRAP signals. The use |
| of a software single-step mechanism prevents this. |
| |
| *** Changes in GDB 5.2.1: |
| |
| * New targets. |
| |
| Atmel AVR avr*-*-* |
| |
| * Bug fixes |
| |
| gdb/182: gdb/323: gdb/237: On alpha, gdb was reporting: |
| mdebugread.c:2443: gdb-internal-error: sect_index_data not initialized |
| Fix, by Joel Brobecker imported from mainline. |
| |
| gdb/439: gdb/291: On some ELF object files, gdb was reporting: |
| dwarf2read.c:1072: gdb-internal-error: sect_index_text not initialize |
| Fix, by Fred Fish, imported from mainline. |
| |
| Dwarf2 .debug_frame & .eh_frame handler improved in many ways. |
| Surprisingly enough, it works now. |
| By Michal Ludvig, imported from mainline. |
| |
| i386 hardware watchpoint support: |
| avoid misses on second run for some targets. |
| By Pierre Muller, imported from mainline. |
| |
| *** Changes in GDB 5.2: |
| |
| * New command "set trust-readonly-sections on[off]". |
| |
| This command is a hint that tells gdb that read-only sections |
| really are read-only (ie. that their contents will not change). |
| In this mode, gdb will go to the object file rather than the |
| target to read memory from read-only sections (such as ".text"). |
| This can be a significant performance improvement on some |
| (notably embedded) targets. |
| |
| * New command "generate-core-file" (or "gcore"). |
| |
| This new gdb command allows the user to drop a core file of the child |
| process state at any time. So far it's been implemented only for |
| GNU/Linux and Solaris, but should be relatively easily ported to other |
| hosts. Argument is core file name (defaults to core.<pid>). |
| |
| * New command line option |
| |
| GDB now accepts --pid or -p followed by a process id. |
| |
| * Change in command line behavior -- corefiles vs. process ids. |
| |
| There is a subtle behavior in the way in which GDB handles |
| command line arguments. The first non-flag argument is always |
| a program to debug, but the second non-flag argument may either |
| be a corefile or a process id. Previously, GDB would attempt to |
| open the second argument as a corefile, and if that failed, would |
| issue a superfluous error message and then attempt to attach it as |
| a process. Now, if the second argument begins with a non-digit, |
| it will be treated as a corefile. If it begins with a digit, |
| GDB will attempt to attach it as a process, and if no such process |
| is found, will then attempt to open it as a corefile. |
| |
| * Changes in ARM configurations. |
| |
| Multi-arch support is enabled for all ARM configurations. The ARM/NetBSD |
| configuration is fully multi-arch. |
| |
| * New native configurations |
| |
| ARM NetBSD arm*-*-netbsd* |
| x86 OpenBSD i[3456]86-*-openbsd* |
| AMD x86-64 running GNU/Linux x86_64-*-linux-* |
| Sparc64 running FreeBSD sparc64-*-freebsd* |
| |
| * New targets |
| |
| Sanyo XStormy16 xstormy16-elf |
| |
| * OBSOLETE configurations and files |
| |
| Configurations that have been declared obsolete in this release have |
| been commented out. Unless there is activity to revive these |
| configurations, the next release of GDB will have their sources |
| permanently REMOVED. |
| |
| AMD 29k family via UDI a29k-amd-udi, udi29k |
| A29K VxWorks a29k-*-vxworks |
| AMD 29000 embedded, using EBMON a29k-none-none |
| AMD 29000 embedded with COFF a29k-none-coff |
| AMD 29000 embedded with a.out a29k-none-aout |
| |
| testsuite/gdb.hp/gdb.threads-hp/ directory |
| |
| * REMOVED configurations and files |
| |
| TI TMS320C80 tic80-*-* |
| WDC 65816 w65-*-* |
| PowerPC Solaris powerpcle-*-solaris* |
| PowerPC Windows NT powerpcle-*-cygwin32 |
| PowerPC Netware powerpc-*-netware* |
| Harris/CXUX m88k m88*-harris-cxux* |
| Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-* |
| ns32k-utek-sysv* ns32k-utek-* |
| SunOS 4.0.Xi on i386 i[3456]86-*-sunos* |
| Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern* |
| Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news |
| ISI Optimum V (3.05) under 4.3bsd. m68*-isi-* |
| Apple Macintosh (MPW) host and target N/A host, powerpc-*-macos* |
| |
| * Changes to command line processing |
| |
| The new `--args' feature can be used to specify command-line arguments |
| for the inferior from gdb's command line. |
| |
| * Changes to key bindings |
| |
| There is a new `operate-and-get-next' function bound to `C-o'. |
| |
| *** Changes in GDB 5.1.1 |
| |
| Fix compile problem on DJGPP. |
| |
| Fix a problem with floating-point registers on the i386 being |
| corrupted. |
| |
| Fix to stop GDB crashing on .debug_str debug info. |
| |
| Numerous documentation fixes. |
| |
| Numerous testsuite fixes. |
| |
| *** Changes in GDB 5.1: |
| |
| * New native configurations |
| |
| Alpha FreeBSD alpha*-*-freebsd* |
| x86 FreeBSD 3.x and 4.x i[3456]86*-freebsd[34]* |
| MIPS GNU/Linux mips*-*-linux* |
| MIPS SGI Irix 6.x mips*-sgi-irix6* |
| ia64 AIX ia64-*-aix* |
| s390 and s390x GNU/Linux {s390,s390x}-*-linux* |
| |
| * New targets |
| |
| Motorola 68HC11 and 68HC12 m68hc11-elf |
| CRIS cris-axis |
| UltraSparc running GNU/Linux sparc64-*-linux* |
| |
| * OBSOLETE configurations and files |
| |
| x86 FreeBSD before 2.2 i[3456]86*-freebsd{1,2.[01]}*, |
| Harris/CXUX m88k m88*-harris-cxux* |
| Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-* |
| ns32k-utek-sysv* ns32k-utek-* |
| TI TMS320C80 tic80-*-* |
| WDC 65816 w65-*-* |
| Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern* |
| PowerPC Solaris powerpcle-*-solaris* |
| PowerPC Windows NT powerpcle-*-cygwin32 |
| PowerPC Netware powerpc-*-netware* |
| SunOS 4.0.Xi on i386 i[3456]86-*-sunos* |
| Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news |
| ISI Optimum V (3.05) under 4.3bsd. m68*-isi-* |
| Apple Macintosh (MPW) host N/A |
| |
| stuff.c (Program to stuff files into a specially prepared space in kdb) |
| kdb-start.c (Main loop for the standalone kernel debugger) |
| |
| Configurations that have been declared obsolete in this release have |
| been commented out. Unless there is activity to revive these |
| configurations, the next release of GDB will have their sources |
| permanently REMOVED. |
| |
| * REMOVED configurations and files |
| |
| Altos 3068 m68*-altos-* |
| Convex c1-*-*, c2-*-* |
| Pyramid pyramid-*-* |
| ARM RISCix arm-*-* (as host) |
| Tahoe tahoe-*-* |
| ser-ocd.c *-*-* |
| |
| * GDB has been converted to ISO C. |
| |
| GDB's source code has been converted to ISO C. In particular, the |
| sources are fully protoized, and rely on standard headers being |
| present. |
| |
| * Other news: |
| |
| * "info symbol" works on platforms which use COFF, ECOFF, XCOFF, and NLM. |
| |
| * The MI enabled by default. |
| |
| The new machine oriented interface (MI) introduced in GDB 5.0 has been |
| revised and enabled by default. Packages which use GDB as a debugging |
| engine behind a UI or another front end are encouraged to switch to |
| using the GDB/MI interface, instead of the old annotations interface |
| which is now deprecated. |
| |
| * Support for debugging Pascal programs. |
| |
| GDB now includes support for debugging Pascal programs. The following |
| main features are supported: |
| |
| - Pascal-specific data types such as sets; |
| |
| - automatic recognition of Pascal sources based on file-name |
| extension; |
| |
| - Pascal-style display of data types, variables, and functions; |
| |
| - a Pascal expression parser. |
| |
| However, some important features are not yet supported. |
| |
| - Pascal string operations are not supported at all; |
| |
| - there are some problems with boolean types; |
| |
| - Pascal type hexadecimal constants are not supported |
| because they conflict with the internal variables format; |
| |
| - support for Pascal objects and classes is not full yet; |
| |
| - unlike Pascal, GDB is case-sensitive for symbol names. |
| |
| * Changes in completion. |
| |
| Commands such as `shell', `run' and `set args', which pass arguments |
| to inferior programs, now complete on file names, similar to what |
| users expect at the shell prompt. |
| |
| Commands which accept locations, such as `disassemble', `print', |
| `breakpoint', `until', etc. now complete on filenames as well as |
| program symbols. Thus, if you type "break foob TAB", and the source |
| files linked into the programs include `foobar.c', that file name will |
| be one of the candidates for completion. However, file names are not |
| considered for completion after you typed a colon that delimits a file |
| name from a name of a function in that file, as in "break foo.c:bar". |
| |
| `set demangle-style' completes on available demangling styles. |
| |
| * New platform-independent commands: |
| |
| It is now possible to define a post-hook for a command as well as a |
| hook that runs before the command. For more details, see the |
| documentation of `hookpost' in the GDB manual. |
| |
| * Changes in GNU/Linux native debugging. |
| |
| Support for debugging multi-threaded programs has been completely |
| revised for all platforms except m68k and sparc. You can now debug as |
| many threads as your system allows you to have. |
| |
| Attach/detach is supported for multi-threaded programs. |
| |
| Support for SSE registers was added for x86. This doesn't work for |
| multi-threaded programs though. |
| |
| * Changes in MIPS configurations. |
| |
| Multi-arch support is enabled for all MIPS configurations. |
| |
| GDB can now be built as native debugger on SGI Irix 6.x systems for |
| debugging n32 executables. (Debugging 64-bit executables is not yet |
| supported.) |
| |
| * Unified support for hardware watchpoints in all x86 configurations. |
| |
| Most (if not all) native x86 configurations support hardware-assisted |
| breakpoints and watchpoints in a unified manner. This support |
| implements debug register sharing between watchpoints, which allows to |
| put a virtually infinite number of watchpoints on the same address, |
| and also supports watching regions up to 16 bytes with several debug |
| registers. |
| |
| The new maintenance command `maintenance show-debug-regs' toggles |
| debugging print-outs in functions that insert, remove, and test |
| watchpoints and hardware breakpoints. |
| |
| * Changes in the DJGPP native configuration. |
| |
| New command ``info dos sysinfo'' displays assorted information about |
| the CPU, OS, memory, and DPMI server. |
| |
| New commands ``info dos gdt'', ``info dos ldt'', and ``info dos idt'' |
| display information about segment descriptors stored in GDT, LDT, and |
| IDT. |
| |
| New commands ``info dos pde'' and ``info dos pte'' display entries |
| from Page Directory and Page Tables (for now works with CWSDPMI only). |
| New command ``info dos address-pte'' displays the Page Table entry for |
| a given linear address. |
| |
| GDB can now pass command lines longer than 126 characters to the |
| program being debugged (requires an update to the libdbg.a library |
| which is part of the DJGPP development kit). |
| |
| DWARF2 debug info is now supported. |
| |
| It is now possible to `step' and `next' through calls to `longjmp'. |
| |
| * Changes in documentation. |
| |
| All GDB documentation was converted to GFDL, the GNU Free |
| Documentation License. |
| |
| Tracepoints-related commands are now fully documented in the GDB |
| manual. |
| |
| TUI, the Text-mode User Interface, is now documented in the manual. |
| |
| Tracepoints-related commands are now fully documented in the GDB |
| manual. |
| |
| The "GDB Internals" manual now has an index. It also includes |
| documentation of `ui_out' functions, GDB coding standards, x86 |
| hardware watchpoints, and memory region attributes. |
| |
| * GDB's version number moved to ``version.in'' |
| |
| The Makefile variable VERSION has been replaced by the file |
| ``version.in''. People creating GDB distributions should update the |
| contents of this file. |
| |
| * gdba.el deleted |
| |
| GUD support is now a standard part of the EMACS distribution. |
| |
| *** Changes in GDB 5.0: |
| |
| * Improved support for debugging FP programs on x86 targets |
| |
| Unified and much-improved support for debugging floating-point |
| programs on all x86 targets. In particular, ``info float'' now |
| displays the FP registers in the same format on all x86 targets, with |
| greater level of detail. |
| |
| * Improvements and bugfixes in hardware-assisted watchpoints |
| |
| It is now possible to watch array elements, struct members, and |
| bitfields with hardware-assisted watchpoints. Data-read watchpoints |
| on x86 targets no longer erroneously trigger when the address is |
| written. |
| |
| * Improvements in the native DJGPP version of GDB |
| |
| The distribution now includes all the scripts and auxiliary files |
| necessary to build the native DJGPP version on MS-DOS/MS-Windows |
| machines ``out of the box''. |
| |
| The DJGPP version can now debug programs that use signals. It is |
| possible to catch signals that happened in the debuggee, deliver |
| signals to it, interrupt it with Ctrl-C, etc. (Previously, a signal |
| would kill the program being debugged.) Programs that hook hardware |
| interrupts (keyboard, timer, etc.) can also be debugged. |
| |
| It is now possible to debug DJGPP programs that redirect their |
| standard handles or switch them to raw (as opposed to cooked) mode, or |
| even close them. The command ``run < foo > bar'' works as expected, |
| and ``info terminal'' reports useful information about the debuggee's |
| terminal, including raw/cooked mode, redirection, etc. |
| |
| The DJGPP version now uses termios functions for console I/O, which |
| enables debugging graphics programs. Interrupting GDB with Ctrl-C |
| also works. |
| |
| DOS-style file names with drive letters are now fully supported by |
| GDB. |
| |
| It is now possible to debug DJGPP programs that switch their working |
| directory. It is also possible to rerun the debuggee any number of |
| times without restarting GDB; thus, you can use the same setup, |
| breakpoints, etc. for many debugging sessions. |
| |
| * New native configurations |
| |
| ARM GNU/Linux arm*-*-linux* |
| PowerPC GNU/Linux powerpc-*-linux* |
| |
| * New targets |
| |
| Motorola MCore mcore-*-* |
| x86 VxWorks i[3456]86-*-vxworks* |
| PowerPC VxWorks powerpc-*-vxworks* |
| TI TMS320C80 tic80-*-* |
| |
| * OBSOLETE configurations |
| |
| Altos 3068 m68*-altos-* |
| Convex c1-*-*, c2-*-* |
| Pyramid pyramid-*-* |
| ARM RISCix arm-*-* (as host) |
| Tahoe tahoe-*-* |
| |
| Configurations that have been declared obsolete will be commented out, |
| but the code will be left in place. If there is no activity to revive |
| these configurations before the next release of GDB, the sources will |
| be permanently REMOVED. |
| |
| * Gould support removed |
| |
| Support for the Gould PowerNode and NP1 has been removed. |
| |
| * New features for SVR4 |
| |
| On SVR4 native platforms (such as Solaris), if you attach to a process |
| without first loading a symbol file, GDB will now attempt to locate and |
| load symbols from the running process's executable file. |
| |
| * Many C++ enhancements |
| |
| C++ support has been greatly improved. Overload resolution now works properly |
| in almost all cases. RTTI support is on the way. |
| |
| * Remote targets can connect to a sub-program |
| |
| A popen(3) style serial-device has been added. This device starts a |
| sub-process (such as a stand-alone simulator) and then communicates |
| with that. The sub-program to run is specified using the syntax |
| ``|<program> <args>'' vis: |
| |
| (gdb) set remotedebug 1 |
| (gdb) target extended-remote |mn10300-elf-sim program-args |
| |
| * MIPS 64 remote protocol |
| |
| A long standing bug in the mips64 remote protocol where by GDB |
| expected certain 32 bit registers (ex SR) to be transfered as 32 |
| instead of 64 bits has been fixed. |
| |
| The command ``set remote-mips64-transfers-32bit-regs on'' has been |
| added to provide backward compatibility with older versions of GDB. |
| |
| * ``set remotebinarydownload'' replaced by ``set remote X-packet'' |
| |
| The command ``set remotebinarydownload'' command has been replaced by |
| ``set remote X-packet''. Other commands in ``set remote'' family |
| include ``set remote P-packet''. |
| |
| * Breakpoint commands accept ranges. |
| |
| The breakpoint commands ``enable'', ``disable'', and ``delete'' now |
| accept a range of breakpoints, e.g. ``5-7''. The tracepoint command |
| ``tracepoint passcount'' also accepts a range of tracepoints. |
| |
| * ``apropos'' command added. |
| |
| The ``apropos'' command searches through command names and |
| documentation strings, printing out matches, making it much easier to |
| try to find a command that does what you are looking for. |
| |
| * New MI interface |
| |
| A new machine oriented interface (MI) has been added to GDB. This |
| interface is designed for debug environments running GDB as a separate |
| process. This is part of the long term libGDB project. See the |
| "GDB/MI" chapter of the GDB manual for further information. It can be |
| enabled by configuring with: |
| |
| .../configure --enable-gdbmi |
| |
| *** Changes in GDB-4.18: |
| |
| * New native configurations |
| |
| HP-UX 10.20 hppa*-*-hpux10.20 |
| HP-UX 11.x hppa*-*-hpux11.0* |
| M68K GNU/Linux m68*-*-linux* |
| |
| * New targets |
| |
| Fujitsu FR30 fr30-*-elf* |
| Intel StrongARM strongarm-*-* |
| Mitsubishi D30V d30v-*-* |
| |
| * OBSOLETE configurations |
| |
| Gould PowerNode, NP1 np1-*-*, pn-*-* |
| |
| Configurations that have been declared obsolete will be commented out, |
| but the code will be left in place. If there is no activity to revive |
| these configurations before the next release of GDB, the sources will |
| be permanently REMOVED. |
| |
| * ANSI/ISO C |
| |
| As a compatibility experiment, GDB's source files buildsym.h and |
| buildsym.c have been converted to pure standard C, no longer |
| containing any K&R compatibility code. We believe that all systems in |
| use today either come with a standard C compiler, or have a GCC port |
| available. If this is not true, please report the affected |
| configuration to bug-gdb@gnu.org immediately. See the README file for |
| information about getting a standard C compiler if you don't have one |
| already. |
| |
| * Readline 2.2 |
| |
| GDB now uses readline 2.2. |
| |
| * set extension-language |
| |
| You can now control the mapping between filename extensions and source |
| languages by using the `set extension-language' command. For instance, |
| you can ask GDB to treat .c files as C++ by saying |
| set extension-language .c c++ |
| The command `info extensions' lists all of the recognized extensions |
| and their associated languages. |
| |
| * Setting processor type for PowerPC and RS/6000 |
| |
| When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target, |
| you can use the `set processor' command to specify what variant of the |
| PowerPC family you are debugging. The command |
| |
| set processor NAME |
| |
| sets the PowerPC/RS6000 variant to NAME. GDB knows about the |
| following PowerPC and RS6000 variants: |
| |
| ppc-uisa PowerPC UISA - a PPC processor as viewed by user-level code |
| rs6000 IBM RS6000 ("POWER") architecture, user-level view |
| 403 IBM PowerPC 403 |
| 403GC IBM PowerPC 403GC |
| 505 Motorola PowerPC 505 |
| 860 Motorola PowerPC 860 or 850 |
| 601 Motorola PowerPC 601 |
| 602 Motorola PowerPC 602 |
| 603 Motorola/IBM PowerPC 603 or 603e |
| 604 Motorola PowerPC 604 or 604e |
| 750 Motorola/IBM PowerPC 750 or 750 |
| |
| At the moment, this command just tells GDB what to name the |
| special-purpose processor registers. Since almost all the affected |
| registers are inaccessible to user-level programs, this command is |
| only useful for remote debugging in its present form. |
| |
| * HP-UX support |
| |
| Thanks to a major code donation from Hewlett-Packard, GDB now has much |
| more extensive support for HP-UX. Added features include shared |
| library support, kernel threads and hardware watchpoints for 11.00, |
| support for HP's ANSI C and C++ compilers, and a compatibility mode |
| for xdb and dbx commands. |
| |
| * Catchpoints |
| |
| HP's donation includes the new concept of catchpoints, which is a |
| generalization of the old catch command. On HP-UX, it is now possible |
| to catch exec, fork, and vfork, as well as library loading. |
| |
| This means that the existing catch command has changed; its first |
| argument now specifies the type of catch to be set up. See the |
| output of "help catch" for a list of catchpoint types. |
| |
| * Debugging across forks |
| |
| On HP-UX, you can choose which process to debug when a fork() happens |
| in the inferior. |
| |
| * TUI |
| |
| HP has donated a curses-based terminal user interface (TUI). To get |
| it, build with --enable-tui. Although this can be enabled for any |
| configuration, at present it only works for native HP debugging. |
| |
| * GDB remote protocol additions |
| |
| A new protocol packet 'X' that writes binary data is now available. |
| Default behavior is to try 'X', then drop back to 'M' if the stub |
| fails to respond. The settable variable `remotebinarydownload' |
| allows explicit control over the use of 'X'. |
| |
| For 64-bit targets, the memory packets ('M' and 'm') can now contain a |
| full 64-bit address. The command |
| |
| set remoteaddresssize 32 |
| |
| can be used to revert to the old behaviour. For existing remote stubs |
| the change should not be noticed, as the additional address information |
| will be discarded. |
| |
| In order to assist in debugging stubs, you may use the maintenance |
| command `packet' to send any text string to the stub. For instance, |
| |
| maint packet heythere |
| |
| sends the packet "$heythere#<checksum>". Note that it is very easy to |
| disrupt a debugging session by sending the wrong packet at the wrong |
| time. |
| |
| The compare-sections command allows you to compare section data on the |
| target to what is in the executable file without uploading or |
| downloading, by comparing CRC checksums. |
| |
| * Tracing can collect general expressions |
| |
| You may now collect general expressions at tracepoints. This requires |
| further additions to the target-side stub; see tracepoint.c and |
| doc/agentexpr.texi for further details. |
| |
| * mask-address variable for Mips |
| |
| For Mips targets, you may control the zeroing of the upper 32 bits of |
| a 64-bit address by entering `set mask-address on'. This is mainly |
| of interest to users of embedded R4xxx and R5xxx processors. |
| |
| * Higher serial baud rates |
| |
| GDB's serial code now allows you to specify baud rates 57600, 115200, |
| 230400, and 460800 baud. (Note that your host system may not be able |
| to achieve all of these rates.) |
| |
| * i960 simulator |
| |
| The i960 configuration now includes an initial implementation of a |
| builtin simulator, contributed by Jim Wilson. |
| |
| |
| *** Changes in GDB-4.17: |
| |
| * New native configurations |
| |
| Alpha GNU/Linux alpha*-*-linux* |
| Unixware 2.x i[3456]86-unixware2* |
| Irix 6.x mips*-sgi-irix6* |
| PowerPC GNU/Linux powerpc-*-linux* |
| PowerPC Solaris powerpcle-*-solaris* |
| Sparc GNU/Linux sparc-*-linux* |
| Motorola sysV68 R3V7.1 m68k-motorola-sysv |
| |
| * New targets |
| |
| Argonaut Risc Chip (ARC) arc-*-* |
| Hitachi H8/300S h8300*-*-* |
| Matsushita MN10200 w/simulator mn10200-*-* |
| Matsushita MN10300 w/simulator mn10300-*-* |
| MIPS NEC VR4100 mips64*vr4100*{,el}-*-elf* |
| MIPS NEC VR5000 mips64*vr5000*{,el}-*-elf* |
| MIPS Toshiba TX39 mips64*tx39*{,el}-*-elf* |
| Mitsubishi D10V w/simulator d10v-*-* |
| Mitsubishi M32R/D w/simulator m32r-*-elf* |
| Tsqware Sparclet sparclet-*-* |
| NEC V850 w/simulator v850-*-* |
| |
| * New debugging protocols |
| |
| ARM with RDI protocol arm*-*-* |
| M68K with dBUG monitor m68*-*-{aout,coff,elf} |
| DDB and LSI variants of PMON protocol mips*-*-* |
| PowerPC with DINK32 monitor powerpc{,le}-*-eabi |
| PowerPC with SDS protocol powerpc{,le}-*-eabi |
| Macraigor OCD (Wiggler) devices powerpc{,le}-*-eabi |
| |
| * DWARF 2 |
| |
| All configurations can now understand and use the DWARF 2 debugging |
| format. The choice is automatic, if the symbol file contains DWARF 2 |
| information. |
| |
| * Java frontend |
| |
| GDB now includes basic Java language support. This support is |
| only useful with Java compilers that produce native machine code. |
| |
| * solib-absolute-prefix and solib-search-path |
| |
| For SunOS and SVR4 shared libraries, you may now set the prefix for |
| loading absolute shared library symbol files, and the search path for |
| locating non-absolute shared library symbol files. |
| |
| * Live range splitting |
| |
| GDB can now effectively debug code for which GCC has performed live |
| range splitting as part of its optimization. See gdb/doc/LRS for |
| more details on the expected format of the stabs information. |
| |
| * Hurd support |
| |
| GDB's support for the GNU Hurd, including thread debugging, has been |
| updated to work with current versions of the Hurd. |
| |
| * ARM Thumb support |
| |
| GDB's ARM target configuration now handles the ARM7T (Thumb) 16-bit |
| instruction set. ARM GDB automatically detects when Thumb |
| instructions are in use, and adjusts disassembly and backtracing |
| accordingly. |
| |
| * MIPS16 support |
| |
| GDB's MIPS target configurations now handle the MIP16 16-bit |
| instruction set. |
| |
| * Overlay support |
| |
| GDB now includes support for overlays; if an executable has been |
| linked such that multiple sections are based at the same address, GDB |
| will decide which section to use for symbolic info. You can choose to |
| control the decision manually, using overlay commands, or implement |
| additional target-side support and use "overlay load-target" to bring |
| in the overlay mapping. Do "help overlay" for more detail. |
| |
| * info symbol |
| |
| The command "info symbol <address>" displays information about |
| the symbol at the specified address. |
| |
| * Trace support |
| |
| The standard remote protocol now includes an extension that allows |
| asynchronous collection and display of trace data. This requires |
| extensive support in the target-side debugging stub. Tracing mode |
| includes a new interaction mode in GDB and new commands: see the |
| file tracepoint.c for more details. |
| |
| * MIPS simulator |
| |
| Configurations for embedded MIPS now include a simulator contributed |
| by Cygnus Solutions. The simulator supports the instruction sets |
| of most MIPS variants. |
| |
| * Sparc simulator |
| |
| Sparc configurations may now include the ERC32 simulator contributed |
| by the European Space Agency. The simulator is not built into |
| Sparc targets by default; configure with --enable-sim to include it. |
| |
| * set architecture |
| |
| For target configurations that may include multiple variants of a |
| basic architecture (such as MIPS and SH), you may now set the |
| architecture explicitly. "set arch" sets, "info arch" lists |
| the possible architectures. |
| |
| *** Changes in GDB-4.16: |
| |
| * New native configurations |
| |
| Windows 95, x86 Windows NT i[345]86-*-cygwin32 |
| M68K NetBSD m68k-*-netbsd* |
| PowerPC AIX 4.x powerpc-*-aix* |
| PowerPC MacOS powerpc-*-macos* |
| PowerPC Windows NT powerpcle-*-cygwin32 |
| RS/6000 AIX 4.x rs6000-*-aix4* |
| |
| * New targets |
| |
| ARM with RDP protocol arm-*-* |
| I960 with MON960 i960-*-coff |
| MIPS VxWorks mips*-*-vxworks* |
| MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf* |
| PowerPC with PPCBUG monitor powerpc{,le}-*-eabi* |
| Hitachi SH3 sh-*-* |
| Matra Sparclet sparclet-*-* |
| |
| * PowerPC simulator |
| |
| The powerpc-eabi configuration now includes the PSIM simulator, |
| contributed by Andrew Cagney, with assistance from Mike Meissner. |
| PSIM is a very elaborate model of the PowerPC, including not only |
| basic instruction set execution, but also details of execution unit |
| performance and I/O hardware. See sim/ppc/README for more details. |
| |
| * Solaris 2.5 |
| |
| GDB now works with Solaris 2.5. |
| |
| * Windows 95/NT native |
| |
| GDB will now work as a native debugger on Windows 95 and Windows NT. |
| To build it from source, you must use the "gnu-win32" environment, |
| which uses a DLL to emulate enough of Unix to run the GNU tools. |
| Further information, binaries, and sources are available at |
| ftp.cygnus.com, under pub/gnu-win32. |
| |
| * dont-repeat command |
| |
| If a user-defined command includes the command `dont-repeat', then the |
| command will not be repeated if the user just types return. This is |
| useful if the command is time-consuming to run, so that accidental |
| extra keystrokes don't run the same command many times. |
| |
| * Send break instead of ^C |
| |
| The standard remote protocol now includes an option to send a break |
| rather than a ^C to the target in order to interrupt it. By default, |
| GDB will send ^C; to send a break, set the variable `remotebreak' to 1. |
| |
| * Remote protocol timeout |
| |
| The standard remote protocol includes a new variable `remotetimeout' |
| that allows you to set the number of seconds before GDB gives up trying |
| to read from the target. The default value is 2. |
| |
| * Automatic tracking of dynamic object loading (HPUX and Solaris only) |
| |
| By default GDB will automatically keep track of objects as they are |
| loaded and unloaded by the dynamic linker. By using the command `set |
| stop-on-solib-events 1' you can arrange for GDB to stop the inferior |
| when shared library events occur, thus allowing you to set breakpoints |
| in shared libraries which are explicitly loaded by the inferior. |
| |
| Note this feature does not work on hpux8. On hpux9 you must link |
| /usr/lib/end.o into your program. This feature should work |
| automatically on hpux10. |
| |
| * Irix 5.x hardware watchpoint support |
| |
| Irix 5 configurations now support the use of hardware watchpoints. |
| |
| * Mips protocol "SYN garbage limit" |
| |
| When debugging a Mips target using the `target mips' protocol, you |
| may set the number of characters that GDB will ignore by setting |
| the `syn-garbage-limit'. A value of -1 means that GDB will ignore |
| every character. The default value is 1050. |
| |
| * Recording and replaying remote debug sessions |
| |
| If you set `remotelogfile' to the name of a file, gdb will write to it |
| a recording of a remote debug session. This recording may then be |
| replayed back to gdb using "gdbreplay". See gdbserver/README for |
| details. This is useful when you have a problem with GDB while doing |
| remote debugging; you can make a recording of the session and send it |
| to someone else, who can then recreate the problem. |
| |
| * Speedups for remote debugging |
| |
| GDB includes speedups for downloading and stepping MIPS systems using |
| the IDT monitor, fast downloads to the Hitachi SH E7000 emulator, |
| and more efficient S-record downloading. |
| |
| * Memory use reductions and statistics collection |
| |
| GDB now uses less memory and reports statistics about memory usage. |
| Try the `maint print statistics' command, for example. |
| |
| *** Changes in GDB-4.15: |
| |
| * Psymtabs for XCOFF |
| |
| The symbol reader for AIX GDB now uses partial symbol tables. This |
| can greatly improve startup time, especially for large executables. |
| |
| * Remote targets use caching |
| |
| Remote targets now use a data cache to speed up communication with the |
| remote side. The data cache could lead to incorrect results because |
| it doesn't know about volatile variables, thus making it impossible to |
| debug targets which use memory mapped I/O devices. `set remotecache |
| off' turns the the data cache off. |
| |
| * Remote targets may have threads |
| |
| The standard remote protocol now includes support for multiple threads |
| in the target system, using new protocol commands 'H' and 'T'. See |
| gdb/remote.c for details. |
| |
| * NetROM support |
| |
| If GDB is configured with `--enable-netrom', then it will include |
| support for the NetROM ROM emulator from XLNT Designs. The NetROM |
| acts as though it is a bank of ROM on the target board, but you can |
| write into it over the network. GDB's support consists only of |
| support for fast loading into the emulated ROM; to debug, you must use |
| another protocol, such as standard remote protocol. The usual |
| sequence is something like |
| |
| target nrom <netrom-hostname> |
| load <prog> |
| target remote <netrom-hostname>:1235 |
| |
| * Macintosh host |
| |
| GDB now includes support for the Apple Macintosh, as a host only. It |
| may be run as either an MPW tool or as a standalone application, and |
| it can debug through the serial port. All the usual GDB commands are |
| available, but to the target command, you must supply "serial" as the |
| device type instead of "/dev/ttyXX". See mpw-README in the main |
| directory for more information on how to build. The MPW configuration |
| scripts */mpw-config.in support only a few targets, and only the |
| mips-idt-ecoff target has been tested. |
| |
| * Autoconf |
| |
| GDB configuration now uses autoconf. This is not user-visible, |
| but does simplify configuration and building. |
| |
| * hpux10 |
| |
| GDB now supports hpux10. |
| |
| *** Changes in GDB-4.14: |
| |
| * New native configurations |
| |
| x86 FreeBSD i[345]86-*-freebsd |
| x86 NetBSD i[345]86-*-netbsd |
| NS32k NetBSD ns32k-*-netbsd |
| Sparc NetBSD sparc-*-netbsd |
| |
| * New targets |
| |
| A29K VxWorks a29k-*-vxworks |
| HP PA PRO embedded (WinBond W89K & Oki OP50N) hppa*-*-pro* |
| CPU32 EST-300 emulator m68*-*-est* |
| PowerPC ELF powerpc-*-elf |
| WDC 65816 w65-*-* |
| |
| * Alpha OSF/1 support for procfs |
| |
| GDB now supports procfs under OSF/1-2.x and higher, which makes it |
| possible to attach to running processes. As the mounting of the /proc |
| filesystem is optional on the Alpha, GDB automatically determines |
| the availability of /proc during startup. This can lead to problems |
| if /proc is unmounted after GDB has been started. |
| |
| * Arguments to user-defined commands |
| |
| User commands may accept up to 10 arguments separated by whitespace. |
| Arguments are accessed within the user command via $arg0..$arg9. A |
| trivial example: |
| define adder |
| print $arg0 + $arg1 + $arg2 |
| |
| To execute the command use: |
| adder 1 2 3 |
| |
| Defines the command "adder" which prints the sum of its three arguments. |
| Note the arguments are text substitutions, so they may reference variables, |
| use complex expressions, or even perform inferior function calls. |
| |
| * New `if' and `while' commands |
| |
| This makes it possible to write more sophisticated user-defined |
| commands. Both commands take a single argument, which is the |
| expression to evaluate, and must be followed by the commands to |
| execute, one per line, if the expression is nonzero, the list being |
| terminated by the word `end'. The `if' command list may include an |
| `else' word, which causes the following commands to be executed only |
| if the expression is zero. |
| |
| * Fortran source language mode |
| |
| GDB now includes partial support for Fortran 77. It will recognize |
| Fortran programs and can evaluate a subset of Fortran expressions, but |
| variables and functions may not be handled correctly. GDB will work |
| with G77, but does not yet know much about symbols emitted by other |
| Fortran compilers. |
| |
| * Better HPUX support |
| |
| Most debugging facilities now work on dynamic executables for HPPAs |
| running hpux9 or later. You can attach to running dynamically linked |
| processes, but by default the dynamic libraries will be read-only, so |
| for instance you won't be able to put breakpoints in them. To change |
| that behavior do the following before running the program: |
| |
| adb -w a.out |
| __dld_flags?W 0x5 |
| control-d |
| |
| This will cause the libraries to be mapped private and read-write. |
| To revert to the normal behavior, do this: |
| |
| adb -w a.out |
| __dld_flags?W 0x4 |
| control-d |
| |
| You cannot set breakpoints or examine data in the library until after |
| the library is loaded if the function/data symbols do not have |
| external linkage. |
| |
| GDB can now also read debug symbols produced by the HP C compiler on |
| HPPAs (sorry, no C++, Fortran or 68k support). |
| |
| * Target byte order now dynamically selectable |
| |
| You can choose which byte order to use with a target system, via the |
| commands "set endian big" and "set endian little", and you can see the |
| current setting by using "show endian". You can also give the command |
| "set endian auto", in which case GDB will use the byte order |
| associated with the executable. Currently, only embedded MIPS |
| configurations support dynamic selection of target byte order. |
| |
| * New DOS host serial code |
| |
| This version uses DPMI interrupts to handle buffered I/O, so you |
| no longer need to run asynctsr when debugging boards connected to |
| a PC's serial port. |
| |
| *** Changes in GDB-4.13: |
| |
| * New "complete" command |
| |
| This lists all the possible completions for the rest of the line, if it |
| were to be given as a command itself. This is intended for use by emacs. |
| |
| * Trailing space optional in prompt |
| |
| "set prompt" no longer adds a space for you after the prompt you set. This |
| allows you to set a prompt which ends in a space or one that does not. |
| |
| * Breakpoint hit counts |
| |
| "info break" now displays a count of the number of times the breakpoint |
| has been hit. This is especially useful in conjunction with "ignore"; you |
| can ignore a large number of breakpoint hits, look at the breakpoint info |
| to see how many times the breakpoint was hit, then run again, ignoring one |
| less than that number, and this will get you quickly to the last hit of |
| that breakpoint. |
| |
| * Ability to stop printing at NULL character |
| |
| "set print null-stop" will cause GDB to stop printing the characters of |
| an array when the first NULL is encountered. This is useful when large |
| arrays actually contain only short strings. |
| |
| * Shared library breakpoints |
| |
| In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set |
| breakpoints in shared libraries before the executable is run. |
| |
| * Hardware watchpoints |
| |
| There is a new hardware breakpoint for the watch command for sparclite |
| targets. See gdb/sparclite/hw_breakpoint.note. |
| |
| Hardware watchpoints are also now supported under GNU/Linux. |
| |
| * Annotations |
| |
| Annotations have been added. These are for use with graphical interfaces, |
| and are still experimental. Currently only gdba.el uses these. |
| |
| * Improved Irix 5 support |
| |
| GDB now works properly with Irix 5.2. |
| |
| * Improved HPPA support |
| |
| GDB now works properly with the latest GCC and GAS. |
| |
| * New native configurations |
| |
| Sequent PTX4 i[34]86-sequent-ptx4 |
| HPPA running OSF/1 hppa*-*-osf* |
| Atari TT running SVR4 m68*-*-sysv4* |
| RS/6000 LynxOS rs6000-*-lynxos* |
| |
| * New targets |
| |
| OS/9000 i[34]86-*-os9k |
| MIPS R4000 mips64*{,el}-*-{ecoff,elf} |
| Sparc64 sparc64-*-* |
| |
| * Hitachi SH7000 and E7000-PC ICE support |
| |
| There is now support for communicating with the Hitachi E7000-PC ICE. |
| This is available automatically when GDB is configured for the SH. |
| |
| * Fixes |
| |
| As usual, a variety of small fixes and improvements, both generic |
| and configuration-specific. See the ChangeLog for more detail. |
| |
| *** Changes in GDB-4.12: |
| |
| * Irix 5 is now supported |
| |
| * HPPA support |
| |
| GDB-4.12 on the HPPA has a number of changes which make it unable |
| to debug the output from the currently released versions of GCC and |
| GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36). Until the next major release |
| of GCC and GAS, versions of these tools designed to work with GDB-4.12 |
| can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist. |
| |
| |
| *** Changes in GDB-4.11: |
| |
| * User visible changes: |
| |
| * Remote Debugging |
| |
| The "set remotedebug" option is now consistent between the mips remote |
| target, remote targets using the gdb-specific protocol, UDI (AMD's |
| debug protocol for the 29k) and the 88k bug monitor. It is now an |
| integer specifying a debug level (normally 0 or 1, but 2 means more |
| debugging info for the mips target). |
| |
| * DEC Alpha native support |
| |
| GDB now works on the DEC Alpha. GCC 2.4.5 does not produce usable |
| debug info, but GDB works fairly well with the DEC compiler and should |
| work with a future GCC release. See the README file for a few |
| Alpha-specific notes. |
| |
| * Preliminary thread implementation |
| |
| GDB now has preliminary thread support for both SGI/Irix and LynxOS. |
| |
| * LynxOS native and target support for 386 |
| |
| This release has been hosted on LynxOS 2.2, and also can be configured |
| to remotely debug programs running under LynxOS (see gdb/gdbserver/README |
| for details). |
| |
| * Improvements in C++ mangling/demangling. |
| |
| This release has much better g++ debugging, specifically in name |
| mangling/demangling, virtual function calls, print virtual table, |
| call methods, ...etc. |
| |
| *** Changes in GDB-4.10: |
| |
| * User visible changes: |
| |
| Remote debugging using the GDB-specific (`target remote') protocol now |
| supports the `load' command. This is only useful if you have some |
| other way of getting the stub to the target system, and you can put it |
| somewhere in memory where it won't get clobbered by the download. |
| |
| Filename completion now works. |
| |
| When run under emacs mode, the "info line" command now causes the |
| arrow to point to the line specified. Also, "info line" prints |
| addresses in symbolic form (as well as hex). |
| |
| All vxworks based targets now support a user settable option, called |
| vxworks-timeout. This option represents the number of seconds gdb |
| should wait for responses to rpc's. You might want to use this if |
| your vxworks target is, perhaps, a slow software simulator or happens |
| to be on the far side of a thin network line. |
| |
| * DEC alpha support |
| |
| This release contains support for using a DEC alpha as a GDB host for |
| cross debugging. Native alpha debugging is not supported yet. |
| |
| |
| *** Changes in GDB-4.9: |
| |
| * Testsuite |
| |
| This is the first GDB release which is accompanied by a matching testsuite. |
| The testsuite requires installation of dejagnu, which should be available |
| via ftp from most sites that carry GNU software. |
| |
| * C++ demangling |
| |
| 'Cfront' style demangling has had its name changed to 'ARM' style, to |
| emphasize that it was written from the specifications in the C++ Annotated |
| Reference Manual, not necessarily to be compatible with AT&T cfront. Despite |
| disclaimers, it still generated too much confusion with users attempting to |
| use gdb with AT&T cfront. |
| |
| * Simulators |
| |
| GDB now uses a standard remote interface to a simulator library. |
| So far, the library contains simulators for the Zilog Z8001/2, the |
| Hitachi H8/300, H8/500 and Super-H. |
| |
| * New targets supported |
| |
| H8/300 simulator h8300-hitachi-hms or h8300hms |
| H8/500 simulator h8500-hitachi-hms or h8500hms |
| SH simulator sh-hitachi-hms or sh |
| Z8000 simulator z8k-zilog-none or z8ksim |
| IDT MIPS board over serial line mips-idt-ecoff |
| |
| Cross-debugging to GO32 targets is supported. It requires a custom |
| version of the i386-stub.c module which is integrated with the |
| GO32 memory extender. |
| |
| * New remote protocols |
| |
| MIPS remote debugging protocol. |
| |
| * New source languages supported |
| |
| This version includes preliminary support for Chill, a Pascal like language |
| used by telecommunications companies. Chill support is also being integrated |
| into the GNU compiler, but we don't know when it will be publically available. |
| |
| |
| *** Changes in GDB-4.8: |
| |
| * HP Precision Architecture supported |
| |
| GDB now supports HP PA-RISC machines running HPUX. A preliminary |
| version of this support was available as a set of patches from the |
| University of Utah. GDB does not support debugging of programs |
| compiled with the HP compiler, because HP will not document their file |
| format. Instead, you must use GCC (version 2.3.2 or later) and PA-GAS |
| (as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z). |
| |
| Many problems in the preliminary version have been fixed. |
| |
| * Faster and better demangling |
| |
| We have improved template demangling and fixed numerous bugs in the GNU style |
| demangler. It can now handle type modifiers such as `static' or `const'. Wide |
| character types (wchar_t) are now supported. Demangling of each symbol is now |
| only done once, and is cached when the symbol table for a file is read in. |
| This results in a small increase in memory usage for C programs, a moderate |
| increase in memory usage for C++ programs, and a fantastic speedup in |
| symbol lookups. |
| |
| `Cfront' style demangling still doesn't work with AT&T cfront. It was written |
| from the specifications in the Annotated Reference Manual, which AT&T's |
| compiler does not actually implement. |
| |
| * G++ multiple inheritance compiler problem |
| |
| In the 2.3.2 release of gcc/g++, how the compiler resolves multiple |
| inheritance lattices was reworked to properly discover ambiguities. We |
| recently found an example which causes this new algorithm to fail in a |
| very subtle way, producing bad debug information for those classes. |
| The file 'gcc.patch' (in this directory) can be applied to gcc to |
| circumvent the problem. A future GCC release will contain a complete |
| fix. |
| |
| The previous G++ debug info problem (mentioned below for the gdb-4.7 |
| release) is fixed in gcc version 2.3.2. |
| |
| * Improved configure script |
| |
| The `configure' script will now attempt to guess your system type if |
| you don't supply a host system type. The old scheme of supplying a |
| host system triplet is preferable over using this. All the magic is |
| done in the new `config.guess' script. Examine it for details. |
| |
| We have also brought our configure script much more in line with the FSF's |
| version. It now supports the --with-xxx options. In particular, |
| `--with-minimal-bfd' can be used to make the GDB binary image smaller. |
| The resulting GDB will not be able to read arbitrary object file formats -- |
| only the format ``expected'' to be used on the configured target system. |
| We hope to make this the default in a future release. |
| |
| * Documentation improvements |
| |
| There's new internal documentation on how to modify GDB, and how to |
| produce clean changes to the code. We implore people to read it |
| before submitting changes. |
| |
| The GDB manual uses new, sexy Texinfo conditionals, rather than arcane |
| M4 macros. The new texinfo.tex is provided in this release. Pre-built |
| `info' files are also provided. To build `info' files from scratch, |
| you will need the latest `makeinfo' release, which will be available in |
| a future texinfo-X.Y release. |
| |
| *NOTE* The new texinfo.tex can cause old versions of TeX to hang. |
| We're not sure exactly which versions have this problem, but it has |
| been seen in 3.0. We highly recommend upgrading to TeX version 3.141 |
| or better. If that isn't possible, there is a patch in |
| `texinfo/tex3patch' that will modify `texinfo/texinfo.tex' to work |
| around this problem. |
| |
| * New features |
| |
| GDB now supports array constants that can be used in expressions typed in by |
| the user. The syntax is `{element, element, ...}'. Ie: you can now type |
| `print {1, 2, 3}', and it will build up an array in memory malloc'd in |
| the target program. |
| |
| The new directory `gdb/sparclite' contains a program that demonstrates |
| how the sparc-stub.c remote stub runs on a Fujitsu SPARClite processor. |
| |
| * New native hosts supported |
| |
| HP/PA-RISC under HPUX using GNU tools hppa1.1-hp-hpux |
| 386 CPUs running SCO Unix 3.2v4 i386-unknown-sco3.2v4 |
| |
| * New targets supported |
| |
| AMD 29k family via UDI a29k-amd-udi or udi29k |
| |
| * New file formats supported |
| |
| BFD now supports reading HP/PA-RISC executables (SOM file format?), |
| HPUX core files, and SCO 3.2v2 core files. |
| |
| * Major bug fixes |
| |
| Attaching to processes now works again; thanks for the many bug reports. |
| |
| We have also stomped on a bunch of core dumps caused by |
| printf_filtered("%s") problems. |
| |
| We eliminated a copyright problem on the rpc and ptrace header files |
| for VxWorks, which was discovered at the last minute during the 4.7 |
| release. You should now be able to build a VxWorks GDB. |
| |
| You can now interrupt gdb while an attached process is running. This |
| will cause the attached process to stop, and give control back to GDB. |
| |
| We fixed problems caused by using too many file descriptors |
| for reading symbols from object files and libraries. This was |
| especially a problem for programs that used many (~100) shared |
| libraries. |
| |
| The `step' command now only enters a subroutine if there is line number |
| information for the subroutine. Otherwise it acts like the `next' |
| command. Previously, `step' would enter subroutines if there was |
| any debugging information about the routine. This avoids problems |
| when using `cc -g1' on MIPS machines. |
| |
| * Internal improvements |
| |
| GDB's internal interfaces have been improved to make it easier to support |
| debugging of multiple languages in the future. |
| |
| GDB now uses a common structure for symbol information internally. |
| Minimal symbols (derived from linkage symbols in object files), partial |
| symbols (from a quick scan of debug information), and full symbols |
| contain a common subset of information, making it easier to write |
| shared code that handles any of them. |
| |
| * New command line options |
| |
| We now accept --silent as an alias for --quiet. |
| |
| * Mmalloc licensing |
| |
| The memory-mapped-malloc library is now licensed under the GNU Library |
| General Public License. |
| |
| *** Changes in GDB-4.7: |
| |
| * Host/native/target split |
| |
| GDB has had some major internal surgery to untangle the support for |
| hosts and remote targets. Now, when you configure GDB for a remote |
| target, it will no longer load in all of the support for debugging |
| local programs on the host. When fully completed and tested, this will |
| ensure that arbitrary host/target combinations are possible. |
| |
| The primary conceptual shift is to separate the non-portable code in |
| GDB into three categories. Host specific code is required any time GDB |
| is compiled on that host, regardless of the target. Target specific |
| code relates to the peculiarities of the target, but can be compiled on |
| any host. Native specific code is everything else: it can only be |
| built when the host and target are the same system. Child process |
| handling and core file support are two common `native' examples. |
| |
| GDB's use of /proc for controlling Unix child processes is now cleaner. |
| It has been split out into a single module under the `target_ops' vector, |
| plus two native-dependent functions for each system that uses /proc. |
| |
| * New hosts supported |
| |
| HP/Apollo 68k (under the BSD domain) m68k-apollo-bsd or apollo68bsd |
| 386 CPUs running various BSD ports i386-unknown-bsd or 386bsd |
| 386 CPUs running SCO Unix i386-unknown-scosysv322 or i386sco |
| |
| * New targets supported |
| |
| Fujitsu SPARClite sparclite-fujitsu-none or sparclite |
| 68030 and CPU32 m68030-*-*, m68332-*-* |
| |
| * New native hosts supported |
| |
| 386 CPUs running various BSD ports i386-unknown-bsd or 386bsd |
| (386bsd is not well tested yet) |
| 386 CPUs running SCO Unix i386-unknown-scosysv322 or sco |
| |
| * New file formats supported |
| |
| BFD now supports COFF files for the Zilog Z8000 microprocessor. It |
| supports reading of `a.out.adobe' object files, which are an a.out |
| format extended with minimal information about multiple sections. |
| |
| * New commands |
| |
| `show copying' is the same as the old `info copying'. |
| `show warranty' is the same as `info warrantee'. |
| These were renamed for consistency. The old commands continue to work. |
| |
| `info handle' is a new alias for `info signals'. |
| |
| You can now define pre-command hooks, which attach arbitrary command |
| scripts to any command. The commands in the hook will be executed |
| prior to the user's command. You can also create a hook which will be |
| executed whenever the program stops. See gdb.texinfo. |
| |
| * C++ improvements |
| |
| We now deal with Cfront style name mangling, and can even extract type |
| info from mangled symbols. GDB can automatically figure out which |
| symbol mangling style your C++ compiler uses. |
| |
| Calling of methods and virtual functions has been improved as well. |
| |
| * Major bug fixes |
| |
| The crash that occured when debugging Sun Ansi-C compiled binaries is |
| fixed. This was due to mishandling of the extra N_SO stabs output |
| by the compiler. |
| |
| We also finally got Ultrix 4.2 running in house, and fixed core file |
| support, with help from a dozen people on the net. |
| |
| John M. Farrell discovered that the reason that single-stepping was so |
| slow on all of the Mips based platforms (primarily SGI and DEC) was |
| that we were trying to demangle and lookup a symbol used for internal |
| purposes on every instruction that was being stepped through. Changing |
| the name of that symbol so that it couldn't be mistaken for a C++ |
| mangled symbol sped things up a great deal. |
| |
| Rich Pixley sped up symbol lookups in general by getting much smarter |
| about when C++ symbol mangling is necessary. This should make symbol |
| completion (TAB on the command line) much faster. It's not as fast as |
| we'd like, but it's significantly faster than gdb-4.6. |
| |
| * AMD 29k support |
| |
| A new user controllable variable 'call_scratch_address' can |
| specify the location of a scratch area to be used when GDB |
| calls a function in the target. This is necessary because the |
| usual method of putting the scratch area on the stack does not work |
| in systems that have separate instruction and data spaces. |
| |
| We integrated changes to support the 29k UDI (Universal Debugger |
| Interface), but discovered at the last minute that we didn't have all |
| of the appropriate copyright paperwork. We are working with AMD to |
| resolve this, and hope to have it available soon. |
| |
| * Remote interfaces |
| |
| We have sped up the remote serial line protocol, especially for targets |
| with lots of registers. It now supports a new `expedited status' ('T') |
| message which can be used in place of the existing 'S' status message. |
| This allows the remote stub to send only the registers that GDB |
| needs to make a quick decision about single-stepping or conditional |
| breakpoints, eliminating the need to fetch the entire register set for |
| each instruction being stepped through. |
| |
| The GDB remote serial protocol now implements a write-through cache for |
| registers, only re-reading the registers if the target has run. |
| |
| There is also a new remote serial stub for SPARC processors. You can |
| find it in gdb-4.7/gdb/sparc-stub.c. This was written to support the |
| Fujitsu SPARClite processor, but will run on any stand-alone SPARC |
| processor with a serial port. |
| |
| * Configuration |
| |
| Configure.in files have become much easier to read and modify. A new |
| `table driven' format makes it more obvious what configurations are |
| supported, and what files each one uses. |
| |
| * Library changes |
| |
| There is a new opcodes library which will eventually contain all of the |
| disassembly routines and opcode tables. At present, it only contains |
| Sparc and Z8000 routines. This will allow the assembler, debugger, and |
| disassembler (binutils/objdump) to share these routines. |
| |
| The libiberty library is now copylefted under the GNU Library General |
| Public License. This allows more liberal use, and was done so libg++ |
| can use it. This makes no difference to GDB, since the Library License |
| grants all the rights from the General Public License. |
| |
| * Documentation |
| |
| The file gdb-4.7/gdb/doc/stabs.texinfo is a (relatively) complete |
| reference to the stabs symbol info used by the debugger. It is (as far |
| as we know) the only published document on this fascinating topic. We |
| encourage you to read it, compare it to the stabs information on your |
| system, and send improvements on the document in general (to |
| bug-gdb@prep.ai.mit.edu). |
| |
| And, of course, many bugs have been fixed. |
| |
| |
| *** Changes in GDB-4.6: |
| |
| * Better support for C++ function names |
| |
| GDB now accepts as input the "demangled form" of C++ overloaded function |
| names and member function names, and can do command completion on such names |
| (using TAB, TAB-TAB, and ESC-?). The names have to be quoted with a pair of |
| single quotes. Examples are 'func (int, long)' and 'obj::operator==(obj&)'. |
| Make use of command completion, it is your friend. |
| |
| GDB also now accepts a variety of C++ mangled symbol formats. They are |
| the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style. |
| You can tell GDB which format to use by doing a 'set demangle-style {gnu, |
| lucid, cfront, auto}'. 'gnu' is the default. Do a 'set demangle-style foo' |
| for the list of formats. |
| |
| * G++ symbol mangling problem |
| |
| Recent versions of gcc have a bug in how they emit debugging information for |
| C++ methods (when using dbx-style stabs). The file 'gcc.patch' (in this |
| directory) can be applied to gcc to fix the problem. Alternatively, if you |
| can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The |
| usual symptom is difficulty with setting breakpoints on methods. GDB complains |
| about the method being non-existent. (We believe that version 2.2.2 of GCC has |
| this problem.) |
| |
| * New 'maintenance' command |
| |
| All of the commands related to hacking GDB internals have been moved out of |
| the main command set, and now live behind the 'maintenance' command. This |
| can also be abbreviated as 'mt'. The following changes were made: |
| |
| dump-me -> maintenance dump-me |
| info all-breakpoints -> maintenance info breakpoints |
| printmsyms -> maintenance print msyms |
| printobjfiles -> maintenance print objfiles |
| printpsyms -> maintenance print psymbols |
| printsyms -> maintenance print symbols |
| |
| The following commands are new: |
| |
| maintenance demangle Call internal GDB demangler routine to |
| demangle a C++ link name and prints the result. |
| maintenance print type Print a type chain for a given symbol |
| |
| * Change to .gdbinit file processing |
| |
| We now read the $HOME/.gdbinit file before processing the argv arguments |
| (e.g. reading symbol files or core files). This allows global parameters to |
| be set, which will apply during the symbol reading. The ./.gdbinit is still |
| read after argv processing. |
| |
| * New hosts supported |
| |
| Solaris-2.0 !!! sparc-sun-solaris2 or sun4sol2 |
| |
| GNU/Linux support i386-unknown-linux or linux |
| |
| We are also including code to support the HP/PA running BSD and HPUX. This |
| is almost guaranteed not to work, as we didn't have time to test or build it |
| for this release. We are including it so that the more adventurous (or |
| masochistic) of you can play with it. We also had major problems with the |
| fact that the compiler that we got from HP doesn't support the -g option. |
| It costs extra. |
| |
| * New targets supported |
| |
| Hitachi H8/300 h8300-hitachi-hms or h8300hms |
| |
| * More smarts about finding #include files |
| |
| GDB now remembers the compilation directory for all include files, and for |
| all files from which C is generated (like yacc and lex sources). This |
| greatly improves GDB's ability to find yacc/lex sources, and include files, |
| especially if you are debugging your program from a directory different from |
| the one that contains your sources. |
| |
| We also fixed a bug which caused difficulty with listing and setting |
| breakpoints in include files which contain C code. (In the past, you had to |
| try twice in order to list an include file that you hadn't looked at before.) |
| |
| * Interesting infernals change |
| |
| GDB now deals with arbitrary numbers of sections, where the symbols for each |
| section must be relocated relative to that section's landing place in the |
| target's address space. This work was needed to support ELF with embedded |
| stabs used by Solaris-2.0. |
| |
| * Bug fixes (of course!) |
| |
| There have been loads of fixes for the following things: |
| mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k, |
| i960, stabs, DOS(GO32), procfs, etc... |
| |
| See the ChangeLog for details. |
| |
| *** Changes in GDB-4.5: |
| |
| * New machines supported (host and target) |
| |
| IBM RS6000 running AIX rs6000-ibm-aix or rs6000 |
| |
| SGI Irix-4.x mips-sgi-irix4 or iris4 |
| |
| * New malloc package |
| |
| GDB now uses a new memory manager called mmalloc, based on gmalloc. |
| Mmalloc is capable of handling mutiple heaps of memory. It is also |
| capable of saving a heap to a file, and then mapping it back in later. |
| This can be used to greatly speedup the startup of GDB by using a |
| pre-parsed symbol table which lives in a mmalloc managed heap. For |
| more details, please read mmalloc/mmalloc.texi. |
| |
| * info proc |
| |
| The 'info proc' command (SVR4 only) has been enhanced quite a bit. See |
| 'help info proc' for details. |
| |
| * MIPS ecoff symbol table format |
| |
| The code that reads MIPS symbol table format is now supported on all hosts. |
| Thanks to MIPS for releasing the sym.h and symconst.h files to make this |
| possible. |
| |
| * File name changes for MS-DOS |
| |
| Many files in the config directories have been renamed to make it easier to |
| support GDB on MS-DOSe systems (which have very restrictive file name |
| conventions :-( ). MS-DOSe host support (under DJ Delorie's GO32 |
| environment) is close to working but has some remaining problems. Note |
| that debugging of DOS programs is not supported, due to limitations |
| in the ``operating system'', but it can be used to host cross-debugging. |
| |
| * Cross byte order fixes |
| |
| Many fixes have been made to support cross debugging of Sparc and MIPS |
| targets from hosts whose byte order differs. |
| |
| * New -mapped and -readnow options |
| |
| If memory-mapped files are available on your system through the 'mmap' |
| system call, you can use the -mapped option on the `file' or |
| `symbol-file' commands to cause GDB to write the symbols from your |
| program into a reusable file. If the program you are debugging is |
| called `/path/fred', the mapped symbol file will be `./fred.syms'. |
| Future GDB debugging sessions will notice the presence of this file, |
| and will quickly map in symbol information from it, rather than reading |
| the symbol table from the executable program. Using the '-mapped' |
| option in a GDB `file' or `symbol-file' command has the same effect as |
| starting GDB with the '-mapped' command-line option. |
| |
| You can cause GDB to read the entire symbol table immediately by using |
| the '-readnow' option with any of the commands that load symbol table |
| information (or on the GDB command line). This makes the command |
| slower, but makes future operations faster. |
| |
| The -mapped and -readnow options are typically combined in order to |
| build a `fred.syms' file that contains complete symbol information. |
| A simple GDB invocation to do nothing but build a `.syms' file for future |
| use is: |
| |
| gdb -batch -nx -mapped -readnow programname |
| |
| The `.syms' file is specific to the host machine on which GDB is run. |
| It holds an exact image of GDB's internal symbol table. It cannot be |
| shared across multiple host platforms. |
| |
| * longjmp() handling |
| |
| GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and |
| siglongjmp() without losing control. This feature has not yet been ported to |
| all systems. It currently works on many 386 platforms, all MIPS-based |
| platforms (SGI, DECstation, etc), and Sun3/4. |
| |
| * Solaris 2.0 |
| |
| Preliminary work has been put in to support the new Solaris OS from Sun. At |
| this time, it can control and debug processes, but it is not capable of |
| reading symbols. |
| |
| * Bug fixes |
| |
| As always, many many bug fixes. The major areas were with g++, and mipsread. |
| People using the MIPS-based platforms should experience fewer mysterious |
| crashes and trashed symbol tables. |
| |
| *** Changes in GDB-4.4: |
| |
| * New machines supported (host and target) |
| |
| SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco |
| (except core files) |
| BSD Reno on Vax vax-dec-bsd |
| Ultrix on Vax vax-dec-ultrix |
| |
| * New machines supported (target) |
| |
| AMD 29000 embedded, using EBMON a29k-none-none |
| |
| * C++ support |
| |
| GDB continues to improve its handling of C++. `References' work better. |
| The demangler has also been improved, and now deals with symbols mangled as |
| per the Annotated C++ Reference Guide. |
| |
| GDB also now handles `stabs' symbol information embedded in MIPS |
| `ecoff' symbol tables. Since the ecoff format was not easily |
| extensible to handle new languages such as C++, this appeared to be a |
| good way to put C++ debugging info into MIPS binaries. This option |
| will be supported in the GNU C compiler, version 2, when it is |
| released. |
| |
| * New features for SVR4 |
| |
| GDB now handles SVR4 shared libraries, in the same fashion as SunOS |
| shared libraries. Debugging dynamically linked programs should present |
| only minor differences from debugging statically linked programs. |
| |
| The `info proc' command will print out information about any process |
| on an SVR4 system (including the one you are debugging). At the moment, |
| it prints the address mappings of the process. |
| |
| If you bring up GDB on another SVR4 system, please send mail to |
| bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any). |
| |
| * Better dynamic linking support in SunOS |
| |
| Reading symbols from shared libraries which contain debugging symbols |
| now works properly. However, there remain issues such as automatic |
| skipping of `transfer vector' code during function calls, which |
| make it harder to debug code in a shared library, than to debug the |
| same code linked statically. |
| |
| * New Getopt |
| |
| GDB is now using the latest `getopt' routines from the FSF. This |
| version accepts the -- prefix for options with long names. GDB will |
| continue to accept the old forms (-option and +option) as well. |
| Various single letter abbreviations for options have been explicity |
| added to the option table so that they won't get overshadowed in the |
| future by other options that begin with the same letter. |
| |
| * Bugs fixed |
| |
| The `cleanup_undefined_types' bug that many of you noticed has been squashed. |
| Many assorted bugs have been handled. Many more remain to be handled. |
| See the various ChangeLog files (primarily in gdb and bfd) for details. |
| |
| |
| *** Changes in GDB-4.3: |
| |
| * New machines supported (host and target) |
| |
| Amiga 3000 running Amix m68k-cbm-svr4 or amix |
| NCR 3000 386 running SVR4 i386-ncr-svr4 or ncr3000 |
| Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
| |
| * Almost SCO Unix support |
| |
| We had hoped to support: |
| SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco |
| (except for core file support), but we discovered very late in the release |
| that it has problems with process groups that render gdb unusable. Sorry |
| about that. I encourage people to fix it and post the fixes. |
| |
| * Preliminary ELF and DWARF support |
| |
| GDB can read ELF object files on System V Release 4, and can handle |
| debugging records for C, in DWARF format, in ELF files. This support |
| is preliminary. If you bring up GDB on another SVR4 system, please |
| send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were |
| reqired (if any). |
| |
| * New Readline |
| |
| GDB now uses the latest `readline' library. One user-visible change |
| is that two tabs will list possible command completions, which previously |
| required typing M-? (meta-question mark, or ESC ?). |
| |
| * Bugs fixed |
| |
| The `stepi' bug that many of you noticed has been squashed. |
| Many bugs in C++ have been handled. Many more remain to be handled. |
| See the various ChangeLog files (primarily in gdb and bfd) for details. |
| |
| * State of the MIPS world (in case you wondered): |
| |
| GDB can understand the symbol tables emitted by the compilers |
| supplied by most vendors of MIPS-based machines, including DEC. These |
| symbol tables are in a format that essentially nobody else uses. |
| |
| Some versions of gcc come with an assembler post-processor called |
| mips-tfile. This program is required if you want to do source-level |
| debugging of gcc-compiled programs. I believe FSF does not ship |
| mips-tfile with gcc version 1, but it will eventually come with gcc |
| version 2. |
| |
| Debugging of g++ output remains a problem. g++ version 1.xx does not |
| really support it at all. (If you're lucky, you should be able to get |
| line numbers and stack traces to work, but no parameters or local |
| variables.) With some work it should be possible to improve the |
| situation somewhat. |
| |
| When gcc version 2 is released, you will have somewhat better luck. |
| However, even then you will get confusing results for inheritance and |
| methods. |
| |
| We will eventually provide full debugging of g++ output on |
| DECstations. This will probably involve some kind of stabs-in-ecoff |
| encapulation, but the details have not been worked out yet. |
| |
| |
| *** Changes in GDB-4.2: |
| |
| * Improved configuration |
| |
| Only one copy of `configure' exists now, and it is not self-modifying. |
| Porting BFD is simpler. |
| |
| * Stepping improved |
| |
| The `step' and `next' commands now only stop at the first instruction |
| of a source line. This prevents the multiple stops that used to occur |
| in switch statements, for-loops, etc. `Step' continues to stop if a |
| function that has debugging information is called within the line. |
| |
| * Bug fixing |
| |
| Lots of small bugs fixed. More remain. |
| |
| * New host supported (not target) |
| |
| Intel 386 PC clone running Mach i386-none-mach |
| |
| |
| *** Changes in GDB-4.1: |
| |
| * Multiple source language support |
| |
| GDB now has internal scaffolding to handle several source languages. |
| It determines the type of each source file from its filename extension, |
| and will switch expression parsing and number formatting to match the |
| language of the function in the currently selected stack frame. |
| You can also specifically set the language to be used, with |
| `set language c' or `set language modula-2'. |
| |
| * GDB and Modula-2 |
| |
| GDB now has preliminary support for the GNU Modula-2 compiler, |
| currently under development at the State University of New York at |
| Buffalo. Development of both GDB and the GNU Modula-2 compiler will |
| continue through the fall of 1991 and into 1992. |
| |
| Other Modula-2 compilers are currently not supported, and attempting to |
| debug programs compiled with them will likely result in an error as the |
| symbol table is read. Feel free to work on it, though! |
| |
| There are hooks in GDB for strict type checking and range checking, |
| in the `Modula-2 philosophy', but they do not currently work. |
| |
| * set write on/off |
| |
| GDB can now write to executable and core files (e.g. patch |
| a variable's value). You must turn this switch on, specify |
| the file ("exec foo" or "core foo"), *then* modify it, e.g. |
| by assigning a new value to a variable. Modifications take |
| effect immediately. |
| |
| * Automatic SunOS shared library reading |
| |
| When you run your program, GDB automatically determines where its |
| shared libraries (if any) have been loaded, and reads their symbols. |
| The `share' command is no longer needed. This also works when |
| examining core files. |
| |
| * set listsize |
| |
| You can specify the number of lines that the `list' command shows. |
| The default is 10. |
| |
| * New machines supported (host and target) |
| |
| SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris |
| Sony NEWS (68K) running NEWSOS 3.x: m68k-sony-sysv or news |
| Ultracomputer (29K) running Sym1: a29k-nyu-sym1 or ultra3 |
| |
| * New hosts supported (not targets) |
| |
| IBM RT/PC: romp-ibm-aix or rtpc |
| |
| * New targets supported (not hosts) |
| |
| AMD 29000 embedded with COFF a29k-none-coff |
| AMD 29000 embedded with a.out a29k-none-aout |
| Ultracomputer remote kernel debug a29k-nyu-kern |
| |
| * New remote interfaces |
| |
| AMD 29000 Adapt |
| AMD 29000 Minimon |
| |
| |
| *** Changes in GDB-4.0: |
| |
| * New Facilities |
| |
| Wide output is wrapped at good places to make the output more readable. |
| |
| Gdb now supports cross-debugging from a host machine of one type to a |
| target machine of another type. Communication with the target system |
| is over serial lines. The ``target'' command handles connecting to the |
| remote system; the ``load'' command will download a program into the |
| remote system. Serial stubs for the m68k and i386 are provided. Gdb |
| also supports debugging of realtime processes running under VxWorks, |
| using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger |
| stub on the target system. |
| |
| New CPUs supported include the AMD 29000 and Intel 960. |
| |
| GDB now reads object files and symbol tables via a ``binary file'' |
| library, which allows a single copy of GDB to debug programs of multiple |
| object file types such as a.out and coff. |
| |
| There is now a GDB reference card in "doc/refcard.tex". (Make targets |
| refcard.dvi and refcard.ps are available to format it). |
| |
| |
| * Control-Variable user interface simplified |
| |
| All variables that control the operation of the debugger can be set |
| by the ``set'' command, and displayed by the ``show'' command. |
| |
| For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>. |
| ``Show prompt'' produces the response: |
| Gdb's prompt is new-gdb=>. |
| |
| What follows are the NEW set commands. The command ``help set'' will |
| print a complete list of old and new set commands. ``help set FOO'' |
| will give a longer description of the variable FOO. ``show'' will show |
| all of the variable descriptions and their current settings. |
| |
| confirm on/off: Enables warning questions for operations that are |
| hard to recover from, e.g. rerunning the program while |
| it is already running. Default is ON. |
| |
| editing on/off: Enables EMACS style command line editing |
| of input. Previous lines can be recalled with |
| control-P, the current line can be edited with control-B, |
| you can search for commands with control-R, etc. |
| Default is ON. |
| |
| history filename NAME: NAME is where the gdb command history |
| will be stored. The default is .gdb_history, |
| or the value of the environment variable |
| GDBHISTFILE. |
| |
| history size N: The size, in commands, of the command history. The |
| default is 256, or the value of the environment variable |
| HISTSIZE. |
| |
| history save on/off: If this value is set to ON, the history file will |
| be saved after exiting gdb. If set to OFF, the |
| file will not be saved. The default is OFF. |
| |
| history expansion on/off: If this value is set to ON, then csh-like |
| history expansion will be performed on |
| command line input. The default is OFF. |
| |
| radix N: Sets the default radix for input and output. It can be set |
| to 8, 10, or 16. Note that the argument to "radix" is interpreted |
| in the current radix, so "set radix 10" is always a no-op. |
| |
| height N: This integer value is the number of lines on a page. Default |
| is 24, the current `stty rows'' setting, or the ``li#'' |
| setting from the termcap entry matching the environment |
| variable TERM. |
| |
| width N: This integer value is the number of characters on a line. |
| Default is 80, the current `stty cols'' setting, or the ``co#'' |
| setting from the termcap entry matching the environment |
| variable TERM. |
| |
| Note: ``set screensize'' is obsolete. Use ``set height'' and |
| ``set width'' instead. |
| |
| print address on/off: Print memory addresses in various command displays, |
| such as stack traces and structure values. Gdb looks |
| more ``symbolic'' if you turn this off; it looks more |
| ``machine level'' with it on. Default is ON. |
| |
| print array on/off: Prettyprint arrays. New convenient format! Default |
| is OFF. |
| |
| print demangle on/off: Print C++ symbols in "source" form if on, |
| "raw" form if off. |
| |
| print asm-demangle on/off: Same, for assembler level printouts |
| like instructions. |
| |
| print vtbl on/off: Prettyprint C++ virtual function tables. Default is OFF. |
| |
| |
| * Support for Epoch Environment. |
| |
| The epoch environment is a version of Emacs v18 with windowing. One |
| new command, ``inspect'', is identical to ``print'', except that if you |
| are running in the epoch environment, the value is printed in its own |
| window. |
| |
| |
| * Support for Shared Libraries |
| |
| GDB can now debug programs and core files that use SunOS shared libraries. |
| Symbols from a shared library cannot be referenced |
| before the shared library has been linked with the program (this |
| happens after you type ``run'' and before the function main() is entered). |
| At any time after this linking (including when examining core files |
| from dynamically linked programs), gdb reads the symbols from each |
| shared library when you type the ``sharedlibrary'' command. |
| It can be abbreviated ``share''. |
| |
| sharedlibrary REGEXP: Load shared object library symbols for files |
| matching a unix regular expression. No argument |
| indicates to load symbols for all shared libraries. |
| |
| info sharedlibrary: Status of loaded shared libraries. |
| |
| |
| * Watchpoints |
| |
| A watchpoint stops execution of a program whenever the value of an |
| expression changes. Checking for this slows down execution |
| tremendously whenever you are in the scope of the expression, but is |
| quite useful for catching tough ``bit-spreader'' or pointer misuse |
| problems. Some machines such as the 386 have hardware for doing this |
| more quickly, and future versions of gdb will use this hardware. |
| |
| watch EXP: Set a watchpoint (breakpoint) for an expression. |
| |
| info watchpoints: Information about your watchpoints. |
| |
| delete N: Deletes watchpoint number N (same as breakpoints). |
| disable N: Temporarily turns off watchpoint number N (same as breakpoints). |
| enable N: Re-enables watchpoint number N (same as breakpoints). |
| |
| |
| * C++ multiple inheritance |
| |
| When used with a GCC version 2 compiler, GDB supports multiple inheritance |
| for C++ programs. |
| |
| * C++ exception handling |
| |
| Gdb now supports limited C++ exception handling. Besides the existing |
| ability to breakpoint on an exception handler, gdb can breakpoint on |
| the raising of an exception (before the stack is peeled back to the |
| handler's context). |
| |
| catch FOO: If there is a FOO exception handler in the dynamic scope, |
| set a breakpoint to catch exceptions which may be raised there. |
| Multiple exceptions (``catch foo bar baz'') may be caught. |
| |
| info catch: Lists all exceptions which may be caught in the |
| current stack frame. |
| |
| |
| * Minor command changes |
| |
| The command ``call func (arg, arg, ...)'' now acts like the print |
| command, except it does not print or save a value if the function's result |
| is void. This is similar to dbx usage. |
| |
| The ``up'' and ``down'' commands now always print the frame they end up |
| at; ``up-silently'' and `down-silently'' can be used in scripts to change |
| frames without printing. |
| |
| * New directory command |
| |
| 'dir' now adds directories to the FRONT of the source search path. |
| The path starts off empty. Source files that contain debug information |
| about the directory in which they were compiled can be found even |
| with an empty path; Sun CC and GCC include this information. If GDB can't |
| find your source file in the current directory, type "dir .". |
| |
| * Configuring GDB for compilation |
| |
| For normal use, type ``./configure host''. See README or gdb.texinfo |
| for more details. |
| |
| GDB now handles cross debugging. If you are remotely debugging between |
| two different machines, type ``./configure host -target=targ''. |
| Host is the machine where GDB will run; targ is the machine |
| where the program that you are debugging will run. |